ENG
(ONLY)
Setting
To
enjoy
the Sound Level
more
powerful sound,
Please set the "SOUND LEVEL"
as
per
below.
Remote Control
1
Press
LEVEL.( )
The LEVEL indicator will appear
2
Press
F( )/G( )
on
to select the
Each time you press the
the
display
window.
speaker you
F( )/G( ) button,
it is
want to set.
changed
as
the
following
order ;
FL(Front Left) C(Center) FR(Front Right) SR(Surround Right) SL(Surround
Left) SW(subwoofer) FL???
?
On the 2 channel stereo mode, you
can
adjust
the sound level of the
SW(Subwoofer)
only.
3
Press
(-6dB
4
To
D( )/E( )
to
+
to
adjust
the sound level of the selected channel.
6dB, 1dB step)
adjust
When the
the sound level of the other
setting
is
completed, press
-1-
channels, Repeat step 2~3.
LEVEL.
Connection
Speaker System
Connect the
speakers using
the
cords
supplied speaker
terminals and those of the cords. To obtain the best
the
by matching the colors of the
possible surround sound, adjust
speaker parameters (distance, level, etc.)
If you feel lack of bass frequency
Connect an active subwoofer to the WOOFER OUT connector
plied). When you connect
speaker connector.
an
using
monaural audio cord
a
(not
sup-
active subwoofer, disconnect the woofer from the WOOFER
Subwoofer
(Not supplied)
Front
speaker
(left)
Front
speaker
(right)
Red
Red Cord
White Cord
Red
Rear speaker
(right surround)
Black
Rear speaker
(left surround)
Center
speaker
Black
Subwoofer
Notes
Be
sure
to match the
If the cords
are
speaker
cord to the
appropriate
terminal
on
the
components
: +
to
+
and
-
to
-
.
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maxiumum
the speakers.
input rating, adjust
on
Do not disassemble the front
cover
of the
supplied speakers.
-2-
P/NO: 3840R-Q012D
the volume
carefully
to avoid excessive
ouput
">
