DVD HOME CINEMA SYSTEM OWNER'S MANUAL MODEL : DA-3520 (DA-3520AD, FE-3500TE, FE-3500WE) Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely. PAGE 2 INTRODUCTION Safety WARNING: Precautions TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: THIS DVD RECEIVER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE, SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION WHEN OPEN THE ENCLOSURE. DO NOT STARE INTO BEAM. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. RECORD YOUR MODEL NUMBER (Now, while you can see it) The model and serial number of your new DVD receiver are located on the back of the DVD receiver cabinet. For your future venience, we suggest that you record these numbers here: MODEL NO.____________________________________ SERIAL NO.____________________________________ con- INTRODUCTION PAGE 3 Table of Contents Introduction Radio SafetyPrecautions........................2 Presettingtheradiostations................29 TableofContents.........................3 Listeningtotheradio.....................30 Precautions.............................4 Operation Reception of RDS (Radio Data Stations 30 System) NotesonDiscs..........................5 IdentificationofControls..................6-9 Sound Operation FrontPanel/Displaywindow.....................6 SelectingaSoundmode..................31 RearPanel.................................7 EnjoyingtheSurroundEffect. . . . . . . . . . . . . .32 . RemoteControl..............................8 ConstituentElements....................32 PreparingtheRemoteControl...................9 SoundfeatureintheRoom...............32 OperatingwiththeRemoteControl. . . . . . . . . . . . . . .9 SpeakerPositioning.....................32 DelayTimeSetting.......................33 Connections SettingtheSoundLevel...................34 AntennaConnections.....................10 Setting SpeakerSystemConnection...............11 Setting ConnectingtoaTVandVCR...............12 byusingthetesttone......................34 Basic Initial Operations BasicPlayback.......................13-14 SpecialPlayback......................15-16 StillPicture............................15 FrameAdvance........................15 Skipping chapters and tracks forward or back . . 15 ScanningatHighSpeed..................16 the sound level of the desired channel . . . . . 34 the Balance between each channels Settings Common procedures of initial settings . . . . . . . . 35 SelectingdiscLanguages.................36 Selecting rating level and password . . . . . . 37-38 . SelectingTVAspect......................39 SelectingMenuLanguage.................40 Table of Languages and Their Abbreviations . . . . . 41 PlayinginSlow-Motion...................16 Reference Operation Using GUI Menu Icons General Information about GUI Detailed description Advanced menu of each GUI icons icon menu Disc . . . . . . . . 17 18 Operation Usingatitlemenu.......................19 UsingaDVDmenu......................19 MemorizingSettingsforViewedDVDs. . . . . . . .20 Changingsubtitlelanguage................21 Changing audio soundtrack language. . . . . . . . . 21 Viewingfromanotherangle................22 RepeatPlay............................23 Storing markers in memory to be viewed (listenedto)again.......................24 ZoomFeature..........................25 SleepTimerSetting......................25 ProgramPlay...........................26 PlaybackwithMP3....................27-28 Requirements/Copyright Before Calling Information Service Personnel . . . . . . . . . . . . . 42 43-44 Specifications...........................45 PAGE 4 INTRODUCTION Precautions Notes on Notes handling When shipping the DVD receiver, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD receiver. Do not leave rubber or plastic products in contact with the DVD receiver for a long time. They will leave marks on the finish. The top and rear panels of the DVD receiver may become warm after a long period of use. This is normal and not a on Moisture Condensation DVD receiver. Moisture condensation Please read the damages the following carefully. Moisture condensation occurs, for example, the same cal pick-up way, moisture may condense on the optilens inside this unit, one of the most cru- cial internal parts of the DVD receiver. malfunction. When the DVD receiver is not in use, be sure when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In Optical lens pick-up to the disc and turn off the power. If you do not use the DVD receiver for a long period, the unit may not function properly in the future. Turn remove on and use the DVD receiver occasionally. Moisture condensation occurs the during following cases. Notes on When you bring the DVD receiver cold place to a warm place. Locating When you place this DVD receiver near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the DVD receiver away from the TV, radio, or VCR. on In summer, when you use and humid after you place just air conditioned When you Cleaning from a When you use the DVD receiver in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit. an Notes directly use the DVD receiver in move a hot the unit from room. the DVD receiver in a humid place. It' s too Use a soft, dry cloth for warm! cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the DVD receiver. Do not If you condensation may occur. If you use the DVD receiver in such use a chemical saturated cloth to clean the unit, follow that product's instructions. may Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should performed by be a qualified service use damage the DVD receiver when moisture discs and internal connect the power cord of the DVD receiver to the wall outlet, turn on the DVD receiver and leave it "ON" for two or three hours. After two or three disc, hours, the DVD receiver will have warmed up and technician. any moisture. Keep the DVD receiver connected to the wall outlet and moisture conden- evaporated To Obtain a Clear Picture sation will seldom The DVD receiver is a situation, it parts. Remove the a high technology, precision occur. device. If the optical pick-up lens and disc drive parts are dirty or down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating worn environment. For details, contact your nearest dealer. Wait! INTRODUCTION Notes on Discs This section shows you how to On PAGE 5 handle, clean, and store discs. On Discs Handling Do not touch the playback side of the disc. Storing Discs Do not store discs in direct sunlight Do not store discs in place subject a or near heat places subject moisture and dust such near a to sources. as a to bathroom or humidifier. Store discs vertically in a case. Stacking placing objects on discs outside of their case may cause warping. Do not attach paper On or tape to discs. About This Owner's Manual Discs Cleaning or Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the This owner's disc from the center outward with Some DVD video discs have functions that a soft cloth. Always keep the disc clean. If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. explains the basic may not be explained in this owner's manual. instructions may differ from this owner's manual, and there may be extra Therefore, some instructions. In this case, follow the instructions on the TV screen or package. displayed Do not any type of solvents such as thinner, benzine, commercially available cleaners or anti-static spray for vinyl LPs. They manual instructions of this DVD receiver. use may damage the disc. " " may appear on the TV screen during operation. This icon means function explained in this owner's not available on that specific DVD disc. the manual is video PAGE 6 INTRODUCTION Identification of Controls Front Panel PHONES connector OPEN/CLOSE POWER button and indicator Disc Remote Tray VOLUME controller RESET button (located FUNCTION button the TUNING/SKIP buttons see page on 44.) joy stick ENTER button RETURN (MEMORY/CLEAR) button TITLE Display bottom, ARROW/PRESET PLAY/PAUSE button STOP sensor button (FM/AM) button MENU (RDS) button (MONO/STEREO) button Window Sound mode Repeat playback indicator mode indicators TUNED indicator SLEEP indicator PROGRAM indicator RDS indicator Chapter/Track number indicator STEREO indicator MUTE indicator Title number indicator PLAY/PAUSE indicator Angle Disc indicator icon indicator Total playing time/Elapsed time/ Frequency/Delay time/Volume etc. indicators MEMORY indicator INTRODUCTION Identification of Controls PAGE 7 (con'd) Rear Panel FM 75Ω Coaxial Antenna Connector AM Antenna Connector WOOFER OUT Connector VIDEO 2 Connectors (Input) VIDEO 1 (Input/Output) Connectors SPEAKER Connectors MONITOR OUT Connector S-VIDEO OUT Connector POWER CORD VIDEO SELECTOR Switch Refer to below* Connect to explanation. an AC 220-240V, 50Hz outlet only. *VIDEO SELECTOR Switch You ? ? ? ? can enjoy NTSC or PAL discs by using your VIDEO SELECTOR switch to choose the appropriate system. If you try to play back PAL disc with NTSC-TV. The DVD receiver will not playback the disc. When the selected VIDEO SELECTOR switch does not coincide with the system of your TV, normal color picture may not be displayed. Adjust the VIDEO SELECTOR switch when the power is turned off. When you playback NTSC disc with PAL-TV, some discs may produce bottom of the black bands at the top and screen. Position of VIDEO SELECTOR switch Connected TV Available disc PAL PAL NTSC/PAL DVD disc NTSC NTSC NTSC DVD disc AUTO MULTI system TV NTSC/PAL DVD disc PAGE 8 INTRODUCTION Identification of Controls (con'd) REMOTE CONTROL You will find instructions for each of the remote control functions in the appropriate sections of this instruction manual. POWER button MUTE button CD/DVD button VIDEO 1 button VIDEO 2 button FM/AM button SLEEP button PRESET (D/E) buttons NUMBER buttons VOLUME (D/E) buttons STOP button PAUSE/STEP button SKIP ( SEARCH) / button PLAY button REPEAT button SOUND MODE button PROGRAM button BY PASS button **ARROW buttons TEST TONE button DELAY button ENTER button LEVEL button ANGLE button RETURN button SUBTITLE button DISPLAY button *MENU button REPEAT A-B button SET-UP button ZOOM button SLOWSCAN( CLEAR button AUDIO button *MENU button Use the MENU button to menu screen MARKER button discs. To included operate DVD Menu" a menu ** Directional buttons (up, down, left, right) for use in highlighting a selection on a GUI menu screen, TITLE and MENU screen. arrow screen discs. To included operate on SKIP screen, "Using a display the DVD video a menu follow the instructions in Menu" the DVD video (page 19). ***TITLE button Use the TITLE button to title display on follow the instructions in SEARCH button ) / buttons ***TITLE button screen, "Using a Title (page 19). / Press and hold button for about two seconds for search function. INTRODUCTION Identification of Controls Preparing (con'd) the Remote Control Insert the batteries into the remote control use it to PAGE 9 so you Operating can with the Remote Control This section shows you how to use the remote control. operate the DVD receiver. Point the remote control at the Open 1 the battery remote cover. sensor and press the buttons. Insert batteries 2 Make (AAA size). to match the sure the marks inside the Close the 3 + and - on the batteries to battery compartment. 30° 30° Within about 23 ft cover. Distance: About 23 ft (7 m) 7 (about m) from the front of the remote sensor About 30°in each direction of the front of the Angle: remote * sensor Do not expose the remote sensor of the DVD receiver to a strong light source such as direct sunlight or be able to illumination. If you do so, you may not operate the DVD receiver with the remote control. Notes batteries on Improper use of batteries may Notes cause battery leakage and corrosion. To on the remote control Direct the remote control at the remote operate the remote control correctly, follow the Do not drop or give the remote control instructions. Do not leave the remote control Do not insert the batteries into the remote control in the humid wrong direction. Do not charge, heat, open, or short-circuit the batteries. Do not throw the batteries into fire. trol. Do not leave dead or exhausted batteries in the remote control. Do not old and use different types of batteries together, or mix batteries. new If you do not use time, remove from battery the remote control for the batteries to avoid a long period possible damage of corrosion. If the remote control does not function operating with range becomes reduced, correctly or if the replace all batteries new ones. If battery leakage occurs, wipe the battery liquid battery compartment, then insert new batteries. The batteries should last about use. sensor of the DVD receiver. one from the year with normal Do place. not spill water or put anything Do not open the remote control. a near an wet on shock. extremely the remote hot or con- PAGE 10 CONNECTIONS Antenna Connections Connect the supplied FM/AM antennas for listening loop antenna to the AM antenna to the radio. ? Connect the AM ? Connector the FM wire antenna to the FM 75Ω coaxial connector. connector. AM FM wire antenna loop antenna (supplied) (supplied) Notes To prevent noise pickup, keep the AM loop Be sure After antenna away from the DVD Receiver and other fully extend the FM wire antenna. connecting the FM wire antenna, keep it to as horizontal as possible. component. CONNECTIONS Speaker System Connect the PAGE 11 Connection speakers using the supplied speaker cords by matching the colors of the terminals and those possible surround sound, adjust the speaker parameters (distance, level, etc.). of the cords. To obtain the best If you feel lack of bass Connect an frequency active subwoofer to the WOOFER OUT connector using a Front speaker (right) monaural audio cord (not supplied). When you connect an active subwoofer, disconnect the woofer from the WOOFER speaker Front speaker (left) connector. Subwoofer (Not supplied) Red Red Cord White Cord Red Rear speaker (right surround) Black Rear speaker (left surround) Center speaker Black Subwoofer Notes Be sure to match the speaker cord to the appropriate terminal on the components: + to + and -- to --. If the cords are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum Do not disassemble the front cover of input rating, adjust supplied speaker. the volume carefully to avoid excessive output on the speakers. PAGE 12 CONNECTIONS to Connecting a TV and VCR Connect the DVD receiver to your TV and VCR. Connect a TV(Monitor) to the MONITOR OUT ? or S-VIDEO OUT connector. ? Connect a VCR to the VIDEO 1 connectors. ? Connect a additional VCR to the VIDEO 2 connectors. Additional VCR IN VCR OUT IN VIDEO OUT VIDEO To AUDIO/VIDEO AUDIO (L) AUDIO (L) AUDIO (R) AUDIO (R) OUT To AUDIO/ To AUDIO/VIDEO OUT VIDEO IN To AUDIO/ VIDEO OUT To AUDIO/ (VIDEO 1) VIDEO IN To AUDIO/VIDEO IN (VIDEO 1) (VIDEO 2) To S-VIDEO S-VIDEO Cable IftheTVhasan S-video OUT (Not supplied) To MONITOR OUT When you connect the DVD receiver to a TV with SCART socket input, connect the VIDEO Cable DVD receiver OR (Supplied) AUDIO/VIDEO Cable with the S-video (Supplied) cable. To S-VIDEO IN To VIDEO IN Back of the DVD receiver S-VIDEO IN TV/MONITOR SCART-RCA VIDEO IN Adaptor (RCA type) TV/MONITOR (SCART type) Notes Refer to the owner's manual of your TV as well. When you connect the DVD receiver to your TV, be before making any connections. sure to turn off the power and Connect the DVD receiver to your TV directly. If you connect the DVD receiver to because DVD video discs are copy protected. The signal of S-VIDEO OUT jack will unplug a VCR, the playback picture will be distorted output only when the function mode is selected When you select the function mode to VIDEO 1, the signal of VIDEO 1 Output both units from the wall outlet to CD/DVD. Jacks is not flow out. BASIC OPERATION Basic PAGE 13 Playback This section shows you the basics on how to play back DVD video disc. a Preparations When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD receiver. When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the 4 23 input source For connection Set the connected to the DVD receiver. details, pages 10 through 12. size according to the aspect ratio of the see playback picture connected TV at the SET-UP 1 (TV Aspect). menu Press POWER. 1 The DVD receiver turns on and the display window lights. Press FUNCTION 2 2 ly or CD/DVD the front on CD/DVD appears in the display window. Press OPEN/CLOSE. 3 You panel repeated- the Remote control until the on The disc can receiver is in 5 4 tray opens. open the disc Place standby a disc playback There are correct tray by pressing this button even if the DVD mode. on the disc tray with the side down. two different disc sizes. Place the disc in the guide on the disc tray. If the disc is out of the guide, damage the disc and cause the DVD receiver to it may malfunction. Do not 5 place anything except 3" discs or 5" discs the disc on tray. Press PLAY. The disc tray is automatically closed and playback begins. If the disc is "NO DISC" placed in upside down (and it is a single sided disc), "DISC ERROR" appears on the TV screen. If you insert an audio CD, the CD indicator lights up in the DVD display. The title number does not appear. or After playing back all of the chapters automatically stops and returns to the When a menu screen In of interactive DVDs with case the TV Example of interactive DVD On-Screen Menu screen. Perform step in the appears 6 on control, title, the DVD receiver menu screen. on the TV screen. a menu screen page 14 to start play. appears on PAGE 14 Basic BASIC OPERATION Playback (con'd) Press D/E/F/G and press ENTER, or press button(s), to select the desired 6 the numeric item. 1 2 OR 34 Play of the selected item begins. now For further information, also refer to the the disc you After 6 or case of operation When the unit is 6 jacket playing. are not in remove use, the disc and press POWER to turn off the DVD receiver. Notes Do not move damage the DVD receiver Use the OPEN/CLOSE button close the disc tray. Do Doing cause so Do not on during playback. Doing so may the disc and the DVD receiver. may push the disc not on push the DVD receiver to open and tray while it is moving. the disc the DVD receiver to malfunction. up the disc tray. Doing tray so put any objects other than discs or may cause the DVD receiver to malfunction. Keep your fingers well clear of the disc tray as it is closing. especially careful with children's fingers around the closing tray as there is a risk of personal injury. When "" appears on the TV screen while a button is that this function is not available on the disc pressed, it means you are playing. Depending on the or DVD disc, restricted. Refer to the playing. Be disc some jacket may be different of the disc you are operations or case BASIC OPERATION PAGE 15 Special Playback Stopping Play Press STOP during playback. Resume When play STOP was Press Play is stopped, the unit records the point where pressed (RESUME function). PLAY and play will resume from this point. Notes Resume function will be cleared when the STOP is pressed on the STOP mode. Resume function will be cleared when the power is turned off STOP PLAY PAUSE/ and then on. Opening the disc tray cancels Resume function. The Resume function may not be available SKIP on some DVD discs. (/) STEP Still Picture Press PAUSE/STEP (Pause) during playback. DVD The DVD receiver will be placed in the still placed in the pause mode. picture mode. CD The DVD receiver will be Frame advance Press PAUSE/STEP (Each time one frame) To (DVD only) still during resume normal forward or advances PLAY. and tracks back forward Press SKIP A chapter (DVD) ton is pressed. Skipping picture playback, press Skipping chapters Skipping playback. you press PAUSE/STEP, the during playback. or a track (CD) is skipped each time the but- back Press SKIP during playback. When the button is chapter/track, chapter/track. skipped each pressed once midway through a the DVD receiver returns to the start of that When it is pressed again, a chapter/track pressed. time the button is is PAGE 16 BASIC OPERATION Special Playback (con'd) You can play back discs at various speeds. To Scan at fast forward reverse Press and hold SKIP two seconds or fast playback. button for about or during playback. [TV screen] FF X2 The GG X2 (reverse) is relatively slow at first. pressed again, the speed becomes faster. (Each time the button is pressed, the speed increases up to 4 steps (DVD) or 1 step (CD).) The speed will be retained even after the button is speed of advance When the button is PLAY SKIP (/) released. To return to normal playback, press PLAY. Note The DVD receiver does not play back sound during the high playback of DVD video discs. However, the DVD receiver plays back sound during fast forward or fast reverse playback of audio CDs. speed SLOW SCAN reverse and forward (/) Playing in slow-motion Press SLOW SCAN The playback speed or (DVD only) during playback. becomes 1/16 of the normal speed. [TV screen] VG 1/16 FV1/16 The speed of slow-motion is slow at first. When the button pressed again, the speed becomes faster. (Each time the button is pressed, the speed increase up to 4 steps.) The speed will be retained even after the button is is released. To return to normal playback, press PLAY. Notes The sound is muted during Subtitles do not appear on slow-motion the screen playback. during slow motion playback. The SLOW SCAN buttons do not work with Audio CDs. OPERATION USING GUI MENU ICONS General Information about GUI menu This unit features GUI Menu Icons showing disc (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and DVD receiver information (repeat play, play mode, marker, etc.). Some icons only show the indicated information. Other icons allow the settings to be changed. PAGE 17 icons Common information 1 procedures Press DISPLAY Title function 2 can during playback. be accessed from the Press D/E to select the desired item. The current selected item is indicated frame 3 stop mode. on its GUI menu by Press F/G to select the desired When numbers are the numeric buttons a yellow icons. displayed (e.g. can title setting. number), setting also be used for instead of F/G. For some functions, the setting will be registered for others, ENTER must be pressed. immediately; To clear the GUI Menu Icons, press DISPLAY again. 2,3 1 Examples of (The screens GUI Menu Icons. may differ depending on the disc contents.) 1 1/5 1 CHAPT 0:16:57 1 ENG D 1 6CH OFF 16:57 1 STER. (DVD GUI) (CD GUI) AB OFF (DVD and CD GUI) PAGE 18 Detailed You can OPERATION USING GUI MENU ICONS description view information about Press DISPLAY of each GUI a disc and its operational icon status during on the TV screen. FUNCTION playback. (Press D/E DVD GUI [TV screen] menu SELECTION to select desired item) To show the current title number and to 1 F/G, to the desired title number jump METHOD or Numeric ENTER To show the current 1 and to chapter to the desired jump F/G, number chapter number or Numeric ENTER SKIP To show the 0:16:57 1 and elapsed directly select Numeric time scenes by the desired time. To show the current audio soundtrack ENG language, encoding method, channel number and to change the settings. D 6CH To show the current subtitles OFF and to ENTER F/G, AUDIO language F/G, S-TITLE change the setting. F/G, To show the current 1 Press DISPLAY and to during ANGLE SELECTION FUNCTION playback. [TV screen] angle number change the angle. (Press D/E CD GUI to select desired item) To show the current track number and to 1 jump to the desired track number METHOD F/G, or Numeric ENTER SKIP To show the 16:57 elapsed time. (Display only) To show the current audio STER. (STEREO, LEFT, RIGHT) and to select to the desired audio channel. Note Some DVD discs may not provide all of the above GUI menu icons. F/G, AUDIO ADVANCED OPERATION Using a title menu Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select the movie title. depending details of (The on the disc operation used.) Selecting a title may not be certain DVD discs. 1 Press TITLE. A list of the titles possible ? 2 2 1 TITLE DVD Resume play to resume play from the scene pressed. not be possible on certain discs. first may Press D/E/F/G and press ENTER or PLAY, or press the numeric button(s), to select desired title. now starts playing. menu Some DVDs have unique menu structures called example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio and subtitle language. Although the DVD menu's contents and operation differ from disc to disc, the following explains the basic operation when this feature is used. menus. displayed. again was The selected title a the disc is on Pressing DVD on differ when TITLE Using PAGE 19 For 1 Press MENU The DVD available on the disc is now displayed. 1 2 34 Pressing MENU when MENU ? 2 during play. menu 2 Resume again was play first resumes play pressed. possible may not be from the on scene certain discs. Press D/E/F/G and press ENTER, or press button(s), to select desired item. the numeric 1 The selected item is now executed. PAGE 20 ADVANCED OPERATION Memorizing Settings for Viewed DVD This unit stores, in memory, settings for the last DVD you have watched. Settings remain in (Last Condition Memory) You memorize details for the following Stop Position (Page 15) TV Aspect (Page 39) Disc Subtitle Language (Page 21, 36) Disc Audio Language (Page 21, 36) Disc Menu Language (Page 36) Angle (Page 22) memory even if you remove the disc from the DVD receiver, or switch power to OFF. If you load settings memorized, the position?" message will appear on the TV screen. When you start playing the disc, the memorized settings are automatically recalled. a can six settings. Last disc that has its "Resume disc from last 1 Load the DVD that It will appear ? If the on screen is left for start from the was the TV more beginning memorized. screen as below than 10 of the title seconds, playback automatically. will Resume disc from last position? 1.No 2 2.Yes Press F/G to select "Yes" and press ENTER. The memorized settings are automatically recalled. 2 Notes stored in memory for use any time. settings for up to 1 DVD in memory. If you for more than 1 DVD previously memorized Settings are You can store rize settings memo- settings erased in order from the last memorized settings. Subsequently, if you try to call up these previously memorized settings, you will get the latest settings that have taken their place. Switching of the audio mode etc., is automatic on some discs. This unit does not store settings in memory, if you remove the are disc from the DVD receiver OFF when DVD or title or menu switch power to the DVD receiver displayed on the TV screen. is ADVANCED OPERATION Changing subtitle PAGE 21 language It is possible to change the subtitle language to a language from the one selected at the initial settings. (See page 36 for further info.) This operation works only with discs on which multiple subtitle languages are recorded. 1 different Press S-TITLE When during playback. subtitles no displayed are recorded, "OFF" will be instead of the language number. OFF 1,2 2 Press S-TITLE desired Number of the subtitle Notes In repeatedly until language is selected. cases, the subtitle the selected on language being played back is shown. is not to language changed immediately. When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other some the the TV one screen. When the desired In this case, turn the subtitle off. is not selected language pressing the button several times, it means language is not available on the disc. even after that the When the power is turned on or the disc is removed, subtitles appears in the language selected at the initial settings. If this language is not recorded disc's priority language appears. Changing ENG 1 on audio soundtrack the To eliminate the On Screen Subtitles. Press S-TITLE repeatedly to select OFF at step 2. disc, the language It is possible to change the audio soundtrack language (or encoding method, channel number) to a different language from the one selected at the initial settings in case of DVD disc. (See page 36 for further info.) This operation works only with discs on which multiple audio soundtrack languages are recorded. And it is possible to change the audio channel in case ? DVDPress 1 AUDIO during play. Number of the audio soundtrack played language being back. ENG 1 D 6CH of audio CD. 2 Press AUDIO repeatedly until the language (or encoding method, channel number) is selected. desired 1,2 D 6CH ? Notes When the desired pressing language is not selected language the button several is not available times, on it means even after CD 1 Press AUDIO If this during play. that the the disc. STER. When the power is turned on or the disc is removed, the language heard is the one selected at the initial settings. language is not recorded on the disc, only language on the disc will be heard. Some discs may not respond to Audio feature. available FRE 2 the 2 Press AUDIO repeatedly until the desired sound is selected. LEFT PAGE 22 Viewing ADVANCED OPERATION from another Some DVDs may contain simultaneously from shot For these discs, the scenes a angle which have been number of different same scene can Press ANGLE 1 angles using the ANGLE button. angles differ depending on the disc Number of angle being played back. 2 1 2 during playback. be viewed from each of these different (The recorded used.) angles. 3 1 Press ANGLE repeatedly desired is selected. angle until the 2 For your reference The ANGLE indicator will blink in the ? scenes ? recorded at different display window at angles to indicate that angle switching is possible. The angle number can be programmed beforehand; angle will be switched to the selected number when the the ANGLE indicator blinks. Note This function at different 1,2 only works angles. for discs having scenes recorded ADVANCED OPERATION PAGE 23 Repeat Play Repeating sections between specific points (A-B repeat) Repeating viewing (listening) Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below and the disc will repeat chapter or title (DVD) or a track (CD). ? a 1 Press REPEAT A-B point where repeat two during play at the play is to start (A). A* DVD Repeat of chapter being played ? Repeat of title being played You can select "OFF" at this step by pressing CLEAR. CHAPT 2 TITLE Press REPEAT A-B where repeat point (B). during play at the play is to be conclud- ed OFF Cancel repeat mode AB (normal play) ?CD Repeat play Repeat of track being played Repeat TRACK ALL of entire of the selection between points A and B starts. To return to normal disc contents Press REPEAT A-B play once "OFF" is displayed. OFF Cancel OFF repeat mode (normal play) Notes To enjoy program repeat play (CD) If REPEAT is is operated pressed during as program play, repeat play below. Repeat of the current programmed Repeat play works only with discs for which the elapsed playing time appears in the display window during playback. Repeat play may not work correctly with some DVDs. A-B repeat play works only within a title DVD or a track CD. Some subtitles recorded around TRACK track appear Repeat of all programs Cancel repeat mode ALL OFF (Program play) To return to normal play Press REPEAT several times until "OFF" is displayed. (DVD). point A or B may fail to PAGE 24 Storing ADVANCED OPERATION markers in memory to be viewed Storing a MARKER in the DVD memory is similar marking your page in a book. It allows you to quickly return to any point on the disc. to (listened to) again Storing marker in the memory a Press MARKER 1 point during play at the starting (listened to) again. to be viewed 1/5 Indicates "1/5" is stored in the memory. to 5 markers can be stored in the memory. Up Recalling/Clearing Press SEARCH 2 marker a during playback. Maker Maker Maker Picture 1 Picture 2 Picture 3 Maker Maker Present Picture 4 Picture 5 Picture 4 Press D/E/F/G to select the marker to be 3 recalled/cleared. 4 Press PLAY 4 3 Play 4 ENTER to recall or press CLEAR to clear 12 resumes from the selected marker, or a a marker. Or marker. point corresponding to the the selected marker is cleared. The "Present Picture" is not cleared. Notes These playing operations work with discs for which the only time appears in the display window elapsed during playback or stop. Some subtitles recorded around the marker may fail to appear (DVD). All the markers are cleared when the power is turned off disc is removed and when TV SET-UP Aspect mode is changed menu. The marker is not stored when the DVD displayed on the TV screen. or title menu is the or on the ADVANCED OPERATION PAGE 25 Zoom feature The Zoom feature allows you to "ZOOM-IN" and enlarge the picture on the screen to either 4 times or 16 times (X16) Press ZOOM 1 (X4) still its normal size. during playback. normal playback or The square frame will be displayed in the centre of picture. If no button is pressed for more than 10 ? the seconds, the square frame will disappear. Each press of the ZOOM button in the left sequence. ? changes the TV screen The ? right magnification corner of the level will be If you press D/E/F/G shifts. 2 displayed in the upper zoom area. buttons, the zoom point 3 Press ENTER. 3 2 The selected frame is 4 1,4 TV screen. To resume normal Press ZOOM displayed in full size on the playback. repeatedly until the normal picture appears. Notes Some discs may not Zoom does not work respond on to the Zoom feature. subtitles or menus included on DVD video discs. X4 X16 (X4) Sleep (X16) Timer You can at specified a (Normal) Setting set the DVD receiver to turn off automatically 1 time. Press SLEEP to set the desired sleep time. The SLEEP indicator and the 2 display sleep time appears in window. Each time you press SLEEP, it is in the following order. changes 1,2 SLEEP120→90→60→30→OFF→120 For your reference ? You can check the time remaining before the DVD time appears in the receiver turns off. Press SLEEP. display window. The remaining PAGE 26 ADVANCED OPERATION Program play The DVD receiver the order you Note: plays specify. Program play the tracks function is on the disc in Press PROGRAM 1 during playback stop or mode. possible only The program with audio CDs. It does not work with DVD playback screen on appears the TV screen. movie discs. Program Step 1 Total Time 00:00 Clear All ? To exit the screen, press PLAY or PROGRAM. Press D/E/F/G and press the numeric to select the desired track number. 2 button(s), 32 Program Step 11 5 9 3 Total Time 08:32 1 Clear All 3 2 ? ? Repeat step 2 to select another track. Up to 20 tracks can be programmed. Press PLAY 3 or ENTER to exit the screen. The selected track is stored in the memory and now begins in the programmed sequence. play If you press PROGRAM to exit the screen, the selected tracks are not memorized. After Play is playback of all tracks programmed stopped. Clearing the program To clear the programmed tracks one by one Press D/E/F/G to select the unwanted number and then press CLEAR. To clear all the programmed tracks Press D/E/F/G to select "Clear All" and then press ENTER. Press PLAY or ENTER to exit the screen. If you press PROGRAM to exit the screen, the programs are not cleared. programs are also cleared when the power is turned off the disc is removed.) (The or ADVANCED OPERATION Playback PAGE 27 with MP3 To 4 play Load 1 MP3 file an MP3 disc. an The MP3 menu is displayed. MP3 2,3 2,4 Program ABCD MP3-1 MP3-2 MP3-3 MP3-4 MP3-5 MP3-6 MP3-7 To play an MP3 file repeatedly If you press REPEAT button the current MP3 file will play MP3-8 during play, repeatedly. If you press REPEAT button twice during play, the directory will play repeatedly. MP3-9 once Press D/E buttons to select the 2 MP3 files that you want to then press ENTER. If you press REPEAT button three times, the repeat play will be cancelled. MP3 Prog MP3 MP3 MP3-1 Clear All Progr play directory are where located and Program MP3-1 MP3-1 .. .. .. TRACK_1 TRACK_2 TRACK_3 TRACK_4 TRACK_5 TRACK_6 TRACK_1 TRACK_1 TRACK_2 TRACK_2 TRACK_3 TRACK_3 TRACK_4 TRACK_4 TRACK_5 TRACK_5 TRACK_6 TRACK_7 TRACK_7 TRACK_8 TRACK_8 REPEAT TRACK_6 TRACK_7 TRACK_8 symbol Press D/E button to select the desired MP3 file 3 of the selected Notes The and file name is only displayed in English. impossible code to display, it will be displayed underlined (_) instead of English. If a directory has no MP3 file, the is displayed with the directory name. This unit can play up to 256 files per disc. A disc recorded with more than 256 files cannot be played. directory If there is Clear All directory MP3 an your disc. on Program MP3-1 .. "" TRACK_1 TRACK_2 TRACK_3 TRACK_4 TRACK_5 TRACK_6 The maximum allowable depth of nested directory is 50. Disc format is compatible with ISO9660 only. If you record mp3 files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback mp3 files. We therefore recommend that you use "Easy-CD Creator", which creates A an ISO9660 file the CD-R one instead. does not However, if the disc is a CD-RW Press ENTER or previous PLAY to start menu, press the playback of the file. For your reference or use a new one. already data files which are not mp3 disc, please, do not use that disc; use are Clear All If you want to return to the RETURN button. 4 session disc format all the data in the disc If there TRACK_8 system. requires mp3 files in the first track. If there is no mp3 file in the 1st track, it cannot playback mp3 files. If you wish to playback mp3 files, single TRACK_7 files on ? a new disc, this Press SKIP file ? apply. or SKIP to play the next file or previous during playback. Press TITLE to move to 1st page of current directory during again to move to the next page and press TITLE within 5 seconds. playback ? Press MENU to move to the Root Directory during playback. PAGE 28 ADVANCED OPERATION Playback with MP3 (Cont'd) To program play an 1 Follow steps 1 to 2 2 Select an MP3 file previous page. on MP3 file to program with D/E. MP3 Program MP3-1 34 .. TRACK_1 TRACK_2 TRACK_3 TRACK_4 TRACK_5 TRACK_6 TRACK_7 2, TRACK_8 44 3 Clear All Press PROGRAM button to add an MP3 file to the program list. MP3 Program MP3-1 TRACK_2 TRACK_7 .. To play an MP3 file repeatedly If you press REPEAT button the current MP3 file will play TRACK_1 TRACK_6 TRACK_2 TRACK_9 TRACK_3 TRACK_4 during play, repeatedly. If you press REPEAT button twice during play, the all MP3 files on the program list will play repeatedly. once TRACK_5 TRACK_6 TRACK_7 ? If you press REPEAT button three times, the repeat play will be cancelled. Program Program TRACK_2 TRACK_2 TRACK_7 TRACK_7 TRACK_6 TRACK_6 TRACK_9 TRACK_9 Clear All TRACK_8 ? 4 Repeat steps Up to 60 files 2 - can 3 to select another track. be programmed. Press G button and select the desired MP3 file and press ENTER MP3 or PLAY button to play. Program MP3-1 TRACK_2 TRACK_7 .. TRACK_1 TRACK_6 TRACK_2 TRACK_9 TRACK_3 Clear All Clear All TRACK_4 TRACK_5 TRACK_6 TRACK_7 REPEAT symbol TRACK_8 Clear All If you want to enter the main menu, press F button. Clearing the program To clear the program one by After all one Press D/E/F/G to select the unwanted MP3 file on the program list and then press CLEAR. To clear all the programs Press D/E/F/G to select the "Clear All" and press ENTER. Play is programmed stopped. tracks are played RADIO OPERATION Presetting You can Before preset the radio stations 30 stations for FM and AM. that you have tuned down the volume to the minimum. tuning, PAGE 29 make 1 sure Press FUNCTION ly or FM 2 3 FM/AM or on on the front panel repeated- the Remote control until the AM appears in the window. display And then every time you press FM/AM, FM and AM changes alternately. Press and hold TUNING/SKIP panel for about frequency indication or on the front two seconds until the starts to change, then release. Scanning stops when the DVD Receiver tunes in station. "TUNED" and "STEREO" appear in the display Note: TUNED is (for stereo a program) window. only appeared when the signal is FM and STEREO. 4 13 4,6 25 5 Press MEMORY. A preset number will flash in the display window. Press D or E on the front preset number you 6 Press MEMORY panel to select the want. again. The station is stored. 7 Repeat steps To tune in a station with Press TUNING/SKIP in the station 3 to 6 to store other stations. or a weak signal repeatedly in step 3 to tune manually. To clear all the memorized stations Press and hold MEMORY for about three seconds and "CLEAR ALL" is press MEMORY appeared in the display window again, the stations are cleared. and then For your reference If all stations have already been entered, MEM FULL message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow steps 5-6 as above. the PAGE 30 RADIO OPERATION to the radio Listening Preset radio stations in the DVD receiver's memory first the previous radio stations" (see "Presetting page). Press FM/AM until AM 1 on display FM appears in the or window. The last received station is tuned in. Press PRESET D 2 12 one preset station at a time. Adjust the volume by rotating VOLUME on front panel or pressing VOLUME D or E repeatedly. 3 Press POWER to turn the DVD receiver off For your reference an FM program is noisy Press MONO/ST. on the front There will reception in the disappears be will no stereo improve. that panel display window. effect, so but Press the button ? ? the again to restore the stereo effect. To (DVD/CD, VIDEO 1 or VIDEO or select another 2). To listen to non-preset radio stations If "STEREO" ? the To turn off the radio function mode ? to select repeatedly the preset station you want. Each time you press the button, the DVD receiver tunes in 3 or E Use manual automatic For manual front ? or tuning, press panel repeatedly. For automatic tuning step 2. TUNING/SKIP or on press and hold TUNING/SKIP tuning, for about two seconds improve reception supplied antennas. in on the front the or panel. Reorient the of RDS Reception (Radio Data System) Stations What is RDS? RDS being by an (Radio Data introduced System) on is system gradually FM in many countries, where Press FUNCTION to select FM 1 a inaudible stream of data is transmitted in addition to the normal radio contains various signal. This data information including station/ Select 2 a desired station PRESET D or AM and then by pressing the E. When the RDS transmission is received, the display shows the program service name (PS) after RDS transmitter identification, traffic information and a list of alternative frequencies for the radio station being or press FM/AM to select FM. indicator appears. received. 3 Press RDS to recall the frequency. Notes RDS is 132 The PS only available for FM reception. (PROGRAM SERVICE) NAME when RDS station is received. a is displayed automatically SOUND OPERATION Selecting PAGE 31 Sound Mode a You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Press SOUND MODE 1 repeatedly until the sound mode you want appears in the window. See the table below for information on display each sound mode. For your reference ? The DVD Receiver memorizes the last sound mode selected for each program source. Whenever you select a program source, the sound mode that was last applied is automatically applied again. For example, if you listen to CD with HALL1 as the sound mode, change to a different program source, then return to CD, HALL1 will be applied again. With the tuner, sound fields are memorized separately for all preset station. ? You identify the encoding format of program by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can software - BY PASS - SOUND MODE - Notes When you play sound tracks with 96 kHz output signals will be converted Sound Mode to 48 kHz sampling frequency, the (sampling frequency). Effect Allows you to enjoy the trademark such high quality digital audio from DTS program sources bearing etc. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. 5.1(or 6) as discrete channels of discs, DVD and compact discs, The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby mark, you can enjoy even better sound Digital program source. If you play DVD of laser discs with quality, greater spatial accuracy, and improved dynamic range. This is because Dolby Digital delivers up to 5 totally discrete, audio channels (front left and right, center, and rear left and right), plus 0.1 channel called LFE*(bass-only effects channel) *LFE=Low Frequency Extension. This channel delivers separate nondirectional bass signals to the subwoofer for more dynamic deep bass sound effects. "" Use this mode when carries the vides the effect of playing movie or Dolby Digital 2 channel which being in a movie theater or live concert house-an effect with obtained sound through DOLBY PRO LOGIC SURROUND. The effect of the image, as well as the sense of fixed position in the sound image, is "" mark. This mode pro- intensity which can only be front/back/left/right movement of the much clearer and more dynamic than an before. When playing recordings of live music and classic, this mode provides a feeling similar to actually being in a of live music and classic, this mode provides a feeling similar to actually being in a small concert hall. When large playing recordings concert hall. This mode 2CH STEREO provides a three dimensional effect similar to that of movie theater. Outputs the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources completely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. You can select 2CH STEREO by pressing BY PASS on the remote control. PAGE 32 Enjoying SOUND OPERATION the Surround Effect Constituent Elements DTS Digital Surround, Dolby Digital and Dolby Pro Logic are enjoy the 3-dimensional sound effect with video image. And you need to use the devices as the following. used to ? Use the Hi-Fi Stereo VCR to ? Use the play the program sizes TV monitor for large high quality sources. video image. ? Use the program etc.) Surround ( or VIDEO TAPE (e.g. LD, DVD, sources marked with DTS Digital ). Surround ( ) or Dolby Manufactured under license from Dolby Laboratories. "Dolby", symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. "Pro Logic", and the double-D Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. Copyright Systems, Inc. All rights reserved. 1996 Digital Theater Sound feature in the Room If the enjoy is made of concrete and thin woods, you cannot the sufficient surround effect. The wall of the room room must have the appropriate absorption reflection effect. If the Subwoofer Center Front Speaker (Left) replace Speaker a little sound hang a curtain etc. Speaker Positioning Surround Speaker (Right) Speaker (Left) factor and has the much reflection effect, the furniture and you need to Front Speaker (Right) Surround room In the position use the 6 speakers (2 front speaker, 2 rear speakers and subwoofer). If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a subwoofer. case center speakers, ? Front of normal speakers We recommend that the and listener's the interval between Speaker Positioning Example ? Center height of the tweeter of the front speakers height. And by hearing position set up speakers to 45 degree. ears are same speaker It is ideal that the center height. ? Rear But in speakers and front speakers are same normally place it above or below the television. speakers right Place left and behind the listening area. These speakers atmosphere. Required for surround playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. recreate sound motion and Notes We recommend that you use the magnetic shielded speakers for the front left/right speakers and center speakers to protect from the video noise of the nearby television. Use the speakers that have a similarity in the sound character of all speakers. In case of the small sizes from the front to listener is other, and near the set the rear rear wall set the speakers rear rear of the room, if the each speakers opposite above 60 - 90 cm than the listen- er's ears, and set up it looks down. ? Subwoofer Without notice for the position. setting position place it an appropriate SOUND OPERATION Delay In Time Dolby Digital or Setting Dolby Pro Logic mode it is Delay assumed that the interval from the listener to each speakers or rear er is same. left and PAGE 33 But if the interval from the center right speakers to the listener is clos- than the interval from the listener to the front left and right speaker, the sound of center or rear left right speaker will reach first than the sound of the front speakers to the listener. In Dolby Digital and Dolby Pro Logic mode for improvement of this problem, by setting the delay time of the center or rear left and right speaker the sound from all speakers will arrive simultaneously and to the listener. (A) L R Time The interval from the Setting to the listener. If the distance speakers speakers is same, in the Dolby Digital and Dolby Pro Logic mode the delay time of each speakers is as following. In Dolby Digital mode Center delay time : 0ms Rear delay time: 5ms In Dolby Pro Logic mode Center delay time : cannot setting Rear delay time : 15-30ms If the rear delay time is set in Dolby Digital mode, in the Dolby Pro Logic mode the delay time will be automatically set. The delay time is 1 msec per 30 cm. If the center and rear speakers are further than the front speakers from the listener, the delay time will be at minimum. from the listener to each C DC Surround DF (B) - = = = Center delay time 1,3 2 setting (Dolby Digital only) = = Setting 1 delay time in the Dolby Digital and Dolby Pro Logic mode the Press DELAY. The current surround display You the Note can adjust the center delay time only in the Dolby Digital mode and its delay time appears. mode If the distance of DF is equal to the distance of DC in the left figure, set the Center Delay Time as 0ms. Otherwise, change the setting according to the table below. Ex) If the distance from the front speakers to the listener is 3m and from the center speaker to the listener is 2.4m, the center delay time is 2msec. 3m (DF) 2.4m (DC) 60cm (A) 60cm (A) / 30cm 2msec - You setting equal to or longer than the DF in the left figure, set the Surround Delay Time as 0ms. Otherwise, change the setting according to the below. Ex) If the distance from front speakers to the listener is 3 m and from rear speakers from the listener is 1.5 m, in the Dolby Digital mode the rear delay time is 5 msec. 3m (DF) 1.5m (DS) 1.5m (B) 1.5m (B) 150cm / 30cm 5msec DS SR time If the distance of DS is SW SL delay 2 3 time is appeared in the window. can select center Dolby Digital Press D/E to If delay setting is delay time by pressing only. mode change the delay complete, press time. DELAY. F/G in PAGE 34 Setting SOUND OPERATION the Sound Level Setting 1 2 the sound level of the desired channel Press LEVEL. The LEVEL indicator will appear in the Press F/G to select a display desired window. speaker Each time you press the F/G button, it is the following order; to set. changed as FL (Front Left) → C (Center) → FR (Front Right) → (Surround Right) → SL (Surround Left) → SW (Subwoofer) → FL (Front Left) On the 2 channel stereo mode, you can only select the SW (Subwoofer). SR ? 3 TEST TONE Press D/E to adjust the sound level of the selected channel. LEVEL 4 5 2-3 and Repeat step If setting Setting is Dolby Digital speakers LEVEL. the Balance between each by using the test tone and tone function you 1 the sound level of complete, press channels In adjust the other channels. Dolby Pro Logic mode by using the test easily adjust the sound balance of the listener's position. can from the Select the test tone mode by pressing TEST TONE. ? A hiss noise comes out for 2 seconds from each speakers in the following order; FL (Front Left) → C (Center) → FR (Front Right) SR (Surround Right) → SL (Surround Left) → SW (Subwoofer) → FL (Front Left) 2 Adjust → the sound level the described in "Setting same way as the sound level of the desired channel" above, so that all the speaker's sound level is same from the listener's position. ? During operating the test tone, if you adjust the paused in the current speaker sound level, it will be channel. For your reference ? To adjust the volume of all the Use the VOLUME control. speakers at one time. INITIAL SETTINGS Selection of initial PAGE 35 settings Once the initial settings have been completed, can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory until they are changed, even if the power is switched Selection of initial settings the DVD receiver 1 Press SET-UP in the stop The SET-UP menu is or playback mode. displayed. off. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Password Spanish TV Italian Aspect Menu Chinese Language Polish Hungarian Russian Other------------ 2 Press D/E to select the desired item. The screen will show the current selected item, and the alternate ? ? ? ? ? ? 2, 33 ? 1 3 setting for setting(s). the Disc Audio (see page 36.) (see page 36.) Disc Menu (see page 36.) Rating (see page 37.) Password (see page 38.) TV Aspect (see page 39.) Menu Language (see page 40.) Disc Subtitle Press G and then D/E to select the desired setting ? and press ENTER. Some items require respective page.) When the alternate the Initial setting Settings display. To exit SET-UP additional is selected the menu Press SET-UP, RETURN steps. (See the or PLAY. screen returns to PAGE 36 Selecting INITIAL SETTINGS disc languages This is to select the audio soundtrack language, language used in title menus or DVD menus which will always be used for every disc to be played back. subtitle language and the At the setup screen, press D/E to select 1 "Disc Audio" and press G. When you play back a DVD video disc, the DVD receiver automatically displays the pre-selected subtitle language if it is included on the disc. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Password Spanish TV Italian Aspect Menu Language Chinese Polish Hungarian Russian Other------------ Press D/E to select the desired 2 language and then press ENTER. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Password Spanish TV Italian Aspect Menu Language Chinese Polish Hungarian 1, 22 Russian Other------------ Original English Other :The : : original language of each disc will be selected. English will be Selected. Another language can be selected. You can input 4-digit language code. (Refer to the language The codes on language page 41. Press CLEAR if code is entered.) The "Disc Subtitle" and "Disc Menu" same are an selected incorrect the by method. Note If the language selected is not available on the disc, language designated by each disc will be selected. the original INITIAL SETTINGS Selecting rating This is to prohibit DVDs which are the level and playing of password specified unsuitable for children. Some DVD discs contain a which enables remove scenes or parents to Selecting rating restriction level 1 prevent playback of discs by children. DVD receivers are designed to equipped with a PAGE 37 level (DVD only) At the SET-UP screen, press D/E to select "Rating" and press G. password prevent children from changing the level. Disc Audio 8 Disc Subtitle 7 Disc Menu 6 Rating 5 Password 4 TV 3 Aspect Menu Language 2 1 Unlock 2 1, Press D/E to select the desired level and press ENTER. Disc Audio 8 Blocked Disc Subtitle 7 Blocked Disc Menu 6 Rating 5 Password 4 TV 3 Aspect Menu 22 Language 2 1 Unlock You cannot play DVD video discs rated higher than the level you selected unless you cancel the parental lock function. For example, when you select level 7, discs rated higher than level 7 are blocked and cannot be played. If you change the level and enter a password, playback of all DVDs with ratings higher than your selection will be blocked, unless the correct password is entered again. For example: you change the level to "5", the DVD receiver will not play discs with ratings of "6", "7" or "8" unless the correct password is entered on the remote control. if PAGE 38 INITIAL SETTINGS Selecting rating level and password (Cont'd) Setting password (DVD only) your If you change the rating level to "7" or lower, you a 4-digit "password" to prevent playback of discs ratings. must enter with higher At the SET-UP screen, press E to select 1 "Password" and press G. Disc Audio 2,3 Disc Subtitle New ------------ Disc Menu Rating Password TV Aspect Menu Language 2,3 1 2 Input 3 Input a 4-digit password and press ENTER. Example : 1234 Do not forget your password. the 4-digit password ENTER to verify. Setting again and press is finished. The rating is locked. Any disc whose rating is higher than setting, cannot be played back unless the correct password is entered. the To 1 memorized change/clear password At the SET-UP screen, press E to select "Password" and press G. 2 To clear your If you current 4-digit password 1 2 Enter 6-digit number then press ENTER. 4-digit password Enter a new Refer to right. "210499" and is cleared. Change Disc Subtitle Clear Rating Password TV Aspect Menu Language your password" 3 To change or to select the clear your "Change" password, press D/E or "Clear" and press ENTER. To password "Setting Disc Audio screen Press E to select "Password" item. 3 and press ENTER. Disc Menu forget your password, to clear the password, follow the procedure below. At the SET-UP The Input your password section on the change the page 37-38 rating level/password, again. follow the steps on INITIAL SETTINGS Selecting Select the TV PAGE 39 Aspect appropriate screen your TV set; conventional size wide-screen (16:9). type according screen (4:3) to 1 or At the SET-UP screen, press D/E to select "TV Aspect" and press G. Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating Password TV Aspect Menu 2 1, Language Press D/E to select the desired Aspect and press ENTER. 22 Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating Password TV Aspect Menu 4:3 Letterbox & Scan The video material not formatted in the Pan : is style played bands appear at 4:3 Panscan : Language back in the letterbox style (black top and bottom of screen). Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played cut off). 16:9 Wide Played 4:3 Letterbox : * Each for 4:3 Panscan 16:9 Wide a Select when in "FULL" size. mode is also Cut Off back in that a style (the screen shows are the wide-screen TV to "FULL" example played. an right edges wide-screen TV set is connected. (Setting necessary.) wide-screen is left and when the video material (This setting does not affect the video material for conventional size.) PAGE 40 Selecting Selects on INITIAL SETTINGS Menu language the TV. Language for SET-UP menus and displays 1 At the SET-UP screen, press D/E to select "Menu Language" Disc Audio English Disc Subtitle German Disc Menu Russian Rating Polish Password Hungarian TV Aspect Menu 2 1, 22 and press G. Language Press D/E to select the desired Language press ENTER. Disc Audio English Disc Subtitle German Disc Menu Russian Rating Polish Password Hungarian TV Aspect Menu Language and INITIAL SETTINGS Table of Enter the Language appropriate Code and Their Abbreviations code number for the initial Language PAGE 41 Code settings "Audio", Language "Subtitle" and/or "Menu" Code 6565 Afar 7079 Faroese 7678 6566 Abkhazian 7082 French 7679 6570 Afrikaans 7089 Frisian 6577 Ameharic 7165 6582 Arabic 6583 Language (See page 36). Code Language Lingala 8375 Slovak Laothian 8376 Slovenian 7684 Lithuanian 8377 Samoan Irish 7686 Latvian, Lettish 8378 Shona 7168 Scots Gaelic 7771 Malagasy 8379 Somali Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian 8382 Serbian 6590 Azerbaijani 7185 Gujarati 7776 Malayalam 8385 Sundanese 6665 Bashkir 7265 Hausa 7778 Mongolian 8386 Swedish 6669 Byelorussian 7273 Hindi 7779 Moldavian 8387 Swahili 6671 Bulgarian 7282 Croatian 7782 Marathi 8465 Tamil 6672 Bihari 7285 Hungarian 7783 Malay 8469 Telugu 6678 Bengali; Bangla 7289 Armenian 7784 Maltese 8471 Tajik 6679 Tibetan 7365 Interlingua 7789 Burmese 8472 Thai 6682 Breton 7378 Indonesian 7865 Nauru 8473 Tigrinya 6765 Catalan 7383 Icelandic 7869 Nepali 8475 Turkmen 6779 Corsican 7384 Italian 7876 Dutch 8476 Tagalog 6783 Czech 7387 Hebrew 7879 Norwegian 8479 Tonga 6789 Welsh 7465 Japanese 7982 Oriya 8482 Turkish 6865 Danish 7473 Yiddish 8065 Panjabi 8484 Tatar 6869 German 7487 Javanese 8076 Polish 8487 Twi 6890 Bhutani 7565 Georgian 8083 Pashto, Pushto 8575 Ukrainian 6976 Greek 7575 Kazakh 8084 Portuguese 8582 Urdu 6978 English 7576 Greenlandic 8185 Quechua 8590 Uzbek 6979 Esperanto 7577 Cambodian 8277 Rhaeto-Romance 8673 Vietnamese 6983 Spanish 7578 Kannada 8279 Rumanian 8679 Volapuk 6984 Estonian 7579 Korean 8285 Russian 8779 Wolof 6985 Basque 7583 Kashmiri 8365 Sanskrit 8872 Xhosa 7065 Persian 7585 Kurdish 8368 Sindhi 8979 Yoruba 7073 Finnish 7589 Kirghiz 8372 Serbo-Croatian 9072 Chinese 7074 Fiji 7665 Latin 8373 Singhalese 9085 Zulu PAGE 42 Disc REFERENCE Requirements/Copyright Playable Information Discs This DVD receiver can play back the following Disc mark discs. Disc size Contents 12 cm Audio+Video DVD video discs (moving pictures) 8cm 12 Audio CDs cm Maximum playback Approx. 4 hours Approx. 8 hours Approx. 80 minutes Approx. 160 minutes (single time sided (double disc) sided (single disc) sided disc) sided (double disc) 74 minutes Audio 8cm 20 minutes In addition, this unit can play back a CD-R or CD-RW that contains audio titles or MP3 files. playback discs other than those listed above. (Video CD, CD-ROM, CD-Extra, CD-G, photo CD, CD-i discs can not be played on this DVD receiver.) You cannot Region Management and Information Region Management Information: This DVD receiver is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD receiver, this DVD receiver cannot play that disc. The Region Notes number of this DVD receiver is 2. on 2 Unauthorized Discs You may not be able to play back some DVD video discs on this DVD receiver if side your geographic area or made for business purposes. When you Notes try on to play an unauthorized disc, "Check Regional Code" appears were on purchased the TV from out- screen. Copyright It is forbidden without back they by law permission. DVD video discs to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material protected, and any recordings made from these discs will be distorted. product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. This are copy REFERENCE Before Calling Service Personnel Symptoms Check the following guide for the possible cause of a and Correction problem before contacting service. Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD receiver does ? No disc is inserted. ? Plug the power securely. Insert a disc. cord into the wall outlet (Check ? The TV is not set to receive DVD signal ? output. Select the on the TV The video cable is not connected ? securely. appropriate video input mode the picture from the DVD no sound or Turn ? The ? Select the correct equipment connected with the audio cable is not set to receive DVD The audio cables not connected are on jacks the TV. input mode of the you can listen to the sound from the DVD receiver. audio receiver signal output. ? securely. so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace is poor. ? The disc is ? Clean the disc. The DVD receiver does ? No disc is inserted. ? screen. Connect the video cable into the ? ? the TV securely. The connected TV power is turned off. only very low-level sound is heard. playback picture on ? a not start is so receiver appears ? The display lit.) picture. There is that the DVD or, audio CD indicator in the DVD not work. No PAGE 43 connecting cord is damaged. dirty. Turn on the equipment connected with the audio cable. ? Insert a it with new one. disc.(Check that the DVD, audio CD indicator in the DVD playback. or display is lit.) ? An disc is inserted. unplayable ? Insert a disc. playable the disc (Check type, color system and Regional code.) ? The disc is placed upside down. ? Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV ? ? screen. on the disc tray correctly guide. Clean the disc. Press the SET-UP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Severe hum or noise is ? The plugs and jacks are dirty. ? rating Wipe Rating function or change level. them with a cloth slightly moist- ened with alcohol. heard. ? The disc is ? The dirty. and speakers components poorly. ? are ? connected ? The DVD receiver is located with TV nearly. Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. PAGE 44 Before REFERENCE Calling Service Personnel (Cont'd) Symptoms Cause Symptom Recording cannot be and Correction ? done. The components are Correction connected ? Connect the components correctly. incorrectly. ? The source is selected in correctly. ? Select the source ton (CD/DVD, Tuner). Radio stations cannot ? The antennas are connected poorly. with FUNCTION but- VIDEO 1, VIDEO 2 ? Connect the antenna ? Adjust or securely. be tuned in. the antennas and connect an external antenna if necessary. ? The signal strength of the stations is (when tuning in with automatic tuning). too ? Tune in the station manually. ? Preset the stations (page 29). weak ? No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. ? sensor pointed at the ? of the DVD receiver. The remote control is too far from the There is an obstacle in the path of the of the DVD receiver. ? Operate the 23ft(7m). ? Remove the obstacle. ? Replace DVD receiver. ? Point the remote control at the remote sensor remote control within about remote control and the DVD receiver. ? The batteries in the remote control are the batteries with new ones. exhausted. the RESET button Using This button is used to solve the ? ? ? - (located problem as on the bottom of DVD receiver) following symptom; When the power can not on, even if power cord is connected to the outlet. When the window display does not display. When the DVD receiver does not Use pencil a or ball-pen RESET Button operate normally. when you press the RESET button. (DVD NOTES: ? If the RESET button is ? Reset the You can Unplug then all memorized data will be cleared such pressed, settings according to instructions. reset the DVD receiver also the power cord and then plug as as preset below. the power cord again after more than five seconds. receiver's stations etc.. bottom) REFERENCE PAGE 45 Specifications Power Power [Genral] [CD/VD] [Video] [Tuner] AM F(MMW) [Amplifer] AC 220-240V, 50 Hz supply consumption 70W Mass 10.2 lbs External dimensions (W x H x D) 360 (4.6 kg) 82 x x 388 mm (14.2 X 3.2 X 15.3 Operating conditions Operating humidity Temperature: Laser Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 Video Operation inches) status: Horizontal 5% to 90% wavelength 650 nm 4 Hz to 20 kHz More than 90 dB (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 95 dB (1 kHz, at 12W position) (p-p), 75 Ω, negative sync., RCA jack 1.0 V (p-p), 75 Ω, negative sync., RCA jack (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin (C) 0.3 V (p-p), 75 Ω 0.15 % 1.0 V output S-video 5°C to 35°C, output 87.5 Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency x 1 108 MHz - 10.7 MHz 50 dB 150 522 - - 12,000 Hz 1,611 kHz 450 kHz Stereo mode 30W+30W(8Ωat1kHz,THD1%) Surround mode Front: 30W (* Depending on the sound mode settings and the source, there may be no sound output.) Center*: 30W 30W Inputs Outputs VIDEO 1, 2 + Surround*: 30W + Subwoofer*: 30W VIDEO 1 30W (8Ω (8Ω at 60 (AUDIO OUT) : kHz, THD 1 %) Hz, THD 1 %) at 1 2 V WOOFER: 2 V Satellite [Speakrs] 1 Type Impedance Frequency Response 1 Way (1m) 30W H x D) 1 (FE-3500WE) Speaker 8Ω 20,000 Hz - 84 dB/W Rated x Passive Subwoofer 8Ω 120 Sound Pressure Level Input Power Max. Input Power Net Dimensions (W Net Weight Speaker (FE-3500TE) Way 1 Speaker 35 - 1,000 Hz 83 dB/W (1m) 30W 60W 60W 90x125x106mm 160x350x325mm 0.7 kg 4.78 kg ?Audiocable.........................1?Videocable..........................1 [Suplied Acesori ] Designs ?Speakers...........................6?Speakercables......................6 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 ?RCA-SCARTAdaptor..................1 and specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project