Advertisement
Advertisement
Installation and Operating Guide | Warranty Model Number | LH-D6235 | DVD/CD Receiver (Speakers: LHS-D6235T/LHS-D6235W) Safety Precautions REGULATORY INFORMATION: CAUTION FCC Part 15 This comply with the digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER product limits for (OR BACK) NO USER-SERVICEABLE PARTS INSIDE has been tested and found to Class B a installed and used in accordance with the instruction REFER SERVICING TO QUALIFIED SERVICE may PERSONNEL. cause However, there is in This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude risk of electric a shock to persons. manual, harmful interference to radio communications. no guarantee that interference will not occur product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the product and receiva particular installation. If this ? ? er. The exclamation within point is intended to alert the user an equilateral triangle to the presence of and maintenance important operating (servicing) accompanying the instructions in the literature ? Connect the product into an outlet on a circuit different from that to which the receiver is connected. ? Consult the dealer for or an experienced radio/TV technician help. appliance. FCC WARNING: This WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. equipment may generate or use radio energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could frequency lose the WARNING: Do not install this such as a book case or equipment in a confined space change authority or to operate this equipment if an unauthorized modification is made. similar unit. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: This To Digital ensure otes Video Disc Receiver proper use of this employs a Laser product, please System. read this manual Should the unit service center- see carefully and retain for future reference. require maintenance, contact an authorized service procedure. owner 's Use of controls, adjustments other than those specified or the performance of procedures herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall or such vases, shall be as splashing and that dripping not be no placed exposed to water, objects filled with liquids, on the apparatus. on copyrights: It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyright material without permission. This product is equipped with copy protection measures developed by Macrovision. Copy protection signals are recorded on some discs. When recording these discs on a VCR, picture noise will appear during playback. This product incorporates copyright protection technology that is protected by certain U.S. patent claims and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is found on the back of this unit. This number is CD-R/RW unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 ___________________________________ ___________________________________ to IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing. This unit does not contain any parts that can be repaired by the user. or fire hazard. The DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. operating instructions product is operated. All these - safety and 10. Protect the power cord from being walked on pinched particularly at plugs, convenience should be read before the receptacles, the 2. these instructions. Keep and The - 11. reference. 3. where they exit from apparatus. Only use attachments/accessories specified by the manufacturer. Heed all and in point safety, operating instructions should be retained for future use and the or warnings. the operating - All warnings on the product instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this example: laundry tub, in pool; and like. near a 6. Clean only a For apparatus near water. tub, wash bowl, kitchen sink, wet basement; or near a swimming -- bath with dry cloth. apparatus. When Unplug this product cleaning. Do not use when -- avoid cleaners. 13. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet ensure built-in installation such reliable as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. Do not install near any heat sources such cart is used, use this caution combination to apparatus during lightning when unused for long periods storms of time. - for are a moving the cart/apparatus injury from tip-over. Unplug or provided operation of the product and to protect it from over- heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a ventilation and to 8. only with the cart, stand, tripod, bracket, or specified by the manufacturer, or sold with table from the wall outlet before liquid 12. Use 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug or does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 3 INTRODUC Table of Contents Introduction .23-24 AudioCDandMP3DiscOperation. .23 PlayinganAudioCDandMP3Disc. NotesonMP3Recordings.................23 . SafetyPrecautions.........................2 ImportantSafetyInstructions.................3 . . . . . RepeatA-B.........................24 NotesonDiscs..........................6 RearPanelButtons.........................9 . . Search.............................24 Precautions.............................6 RemoteControl............................8 . . MovingtoanotherTrack...............24 RepeatTrack/All/Off...................24 PlayableDiscs...........................5 . . . Pause.............................24 BeforeUse..............................5-6 AboutSymbols..........................6 Controls/Display Window Indicators 7 . . TableofContents..........................4 Front Panel . 3DSurround........................24 .24 ChangingtheAudioChannel. JPEGDiscOperation......................25 ViewingaJPEGdisc.....................25 MovingtoanotherFile.................25 . . . . . . . . . . StillPicture.........................25 System Setup Connections...........................10-14 AerialConnections.......................10 TVConnections.........................11 .12 ExternalEquipmentConnections. SpeakerSystemConnection...............13 SpeakerPositioning......................14 BeforeOperation.......................15-19 Mini Glossary for Audio Stream & Surround . . . . . . . . . . Mode.................................15 SoundMode...........................15 GeneralExplanation......................16 On-ScreenDisplay.......................16 InitialSettings........................17-19 Initial Settings General Operation. 17 Language..........................17 . . . . . . . . Picture.............................17 Toflipthepicture.....................25 Torotatepicture......................25 .25 NotesonJPEGRecordings. ProgrammedPlayback.....................26 Programmed Playback with Audio CD . . . . . . . . . . . andMP3Disc..........................26 .26 ProgrammedPlaybackwithVideoCD. SpeakerSetup............................27 . . . . . . AdditionalInformation.....................27 LastConditionMemory...................27 RadioOperation........................28-29 Presettingtheradiostations................28 Listeningtotheradio.....................28 SleepTimerSetup.......................29 Dimmer...............................29 Mute.................................29 UsingHeadphoneJack...................29 SpeakerSetup.......................18 Others.............................18 ParentalControl......................19 Operation .20-22 DVDandVideoCDOperation PlayingaDVDandVideoCD...............20 . . . . . . . . . . . . GeneralFeatures........................20 MovingtoanotherTITLE...............20 20 Moving to another CHAPTER/TRACK . . . . Reference LanguageCodeList.......................30 CountryCodeList.........................31 Troubleshooting........................32-33 Specifications............................34 About the Indicates hazards . Search.............................20 Still Picture and Frame-by-Frame Playback . symbols itself or for instructions likely to cause damage. harm to the unit other material 21 SlowMotion.........................21 Indicates special operating Repeat............................21 RepeatA-B.........................21 Indicates tips and hints for features of this unit. making the task easier. TimeSearch........................21 3DSurround........................21 Zoom..............................22 MarkerSearch.......................22 SpecialDVDFeatures....................22 TitleMenu..........................22 DiscMenu..........................22 CameraAngle.......................22 .22 ChangingtheAudioLanguage. .22 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................22 4 Manufactured under license from Dolby Laboratories. "Dolby", symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. "Pro Logic", and the double-D Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, Inc. All rights reserved. 2000 Digital Theater Systems, Before Use Playable Disc-related terms Discs Title Video CD you to locate it (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) addition, this unit can play a DVD-RW, DVD+RW, Kodak PICTURE CD and CD-R audio titles, MP3 or or CD-RW that contain JPEG files. -- on or itself, some CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not CDs or malfunctions. use irregularly shaped octagonal). It may result in otes on (the (e.g., heart-shaped playback operations of DVDs may be intentionally fixed by software manufacturers. As this unit plays DVDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Make sure to also refer to the instructions supplied with the DVDs. Some DVDs made for business purposes may not be able to be played on the unit. code of the DVD/CD receiver and DVDs This DVD/CD receiver is designed and manufactured for playback of region "1" encoded DVD software. region code on the labels of some DVD 1 discs indicates which type of receiver can play those discs. This unit can play only DVD discs labeled "1" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area The a CD and audio CD picture or a enabling only) piece assigned musical on a a video CD track number, you to locate the track you want. Scene On video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. DVDs Some Regional enabling easily. audio CD. Each track is or an the conditions of the the CD-R/RW ment cannot be -- (Video Sections of Depending feature content Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track otes -- accompanying or additional feature content, or music album. Each title is assigned a title reference number or (8cm/12cmdisc) In (DVD only) The main film content DVD of video CDs Types There are two types of video CDs: Video CDs PBC equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. limits. 5 INTRODUC Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be disturbed the unit away from the TV, VCR, unit after removing the disc. To near or turn off the use volatile liquids, such leave marks Cleaning a or long period a and dust the disc on reduce sound with a clean quality. cloth. Wipe Before distort the picture clean the disc the disc from the center out- spray intended for use thinner, are moistened with lightly solution. Do not or strong as a extremely dirty, detergent mild solvents such these as might damage About the surface clear records. Symbols About the " a vinyl alcohol, of the unit. To obtain NO Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static the unit soft, dry cloth. If the surfaces benzene, YES the surface. on soft cloth symbol display " may appear on the TV This icon means the function picture The DVD/CD receiver is a high-tech, precision device. If optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. manual is not available on the About the disc applicable only on Discs VCD2.0 during operation. explained in this owner's that specific DVD video disc. screen for instructions symbols A section whose title has DVD Notes can playing, wards. plastic products in of time. They will To clean the cabinet use a discs Fingerprints or insecticide spray, as the unit. Do not leave rubber contact with the unit for Use Cleaning temperature the exterior surfaces clean keep Do not radio, or as there may be a considerable increase inside the car. of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function Disc handling Do not touch the Hold the disc get on by VCD1.1 playback edges the 6 that fingerprints will not CD MP3 the surface. Do not stick paper function side of the disc. so or tape on the disc. Video CDs without the PBC JPEG Audio CDs. MP3 disc JPEG disc (playback control) Front Panel Controls/ Window Indicators Display STANDBY/ON OPEN/CLOSE button STANDBY indicator INTRODUC Lights red when the receiver is in Standby mode (off). DISPLAY PLAY button Window DISC VOLUME Tray control VOLUME OPEN/CLOSE PAUSE/STEP PLAY STANDBY/ON STOP/CLEAR PHONES MONO/STEREO MEMORY DOWN - TUNING - UP PAUSE/STEP/MONO/STEREO Remote button TUNING STOP/CLEAR/MEMORY button sensor PHONES (DOWN/UP)/ input SKIP/SCAN buttons Indicates current Indicates current surround mode or chapter track number Indicates current audio stream Repeat playback Indicates current mode indicators function: MEMORY indicator player Playback, Pause, TUNED indicator etc. STEREO indicator Programmed playback active Indicates current title number MUTE indicator Total ANGLE available indicator SLEEP indicator playing time/Elapsed time/ Frequency/Sleep time/Surround mode/Volume etc. indicators DVD DVD disc inserted VCD VCD disc inserted MP3 MP3 disc inserted 7 Remote Control Buttons OPEN/CLOSE button POWER button AUX button BAND button CD/DVD button MUTE button DIMMER button SLEEP button NUMBER buttons REPEAT A-B button REPEAT button PROGRAM button SOUND MODE button AUDIO button CLEAR button PRESET(+/-) buttons VOLUME (+/-) buttons SUBTITLE button ZOOM button RETURN button ENTER button ARROW buttons For use in on a GUI menu highlighting selection a DISPLAY button screen, TITLE and MENU screen. STOP button MENU button Use the MENU button to the included menu screen PAUSE/STEP button display on PLAY button DVD SKIP/SCAN video discs. screen ) Press and hold button for about Use the TITLE button to the title / two seconds for search function. TITLE button display ( buttons SETUP button ANGLE button included DVD video discs. on SLOW SCAN (Q / R) SEARCH button buttons MARKER button Remote Control Remote Control Operation Range Point the remote control at the remote sensor and press Remove the the buttons. Distance: About 23 ft remote Angle: sensor Installation Battery battery of the remote (7 m) from the front of the AAA AAA sensor R03 cover on (size AAA) batteries aligned correctly. with rear two and About 30° in each direction in front of the remote Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 8 the control, and insert Rear Panel Connections AM Antenna Connectors FM 300Ω Antenna Connector INTRODUC AUXILIARY INPUT Connectors SPEAKER Connectors RR LL 300 S-VIDEO OUT POWER CORD Connector MONITOR OUT Connector Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 9 Connections Aerial Connections Connect the supplied FM/AM aerials loop aerial to the Connect the AM for listening to the radio. AM aerial connectors. Connect he FM wire aerial to the FM aerial connectors. AM FM Wire aerial Loop aerial (supplied) (supplied) RR 300 LL otes To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components. Be sure After 10 to fully extend the FM wire aerial. connecting the FM wire aerial, keep it as horizontal as possible. Connections (Continued) TV Connections Rear of TV S-VIDEO SCART INPUT INPUT VIDEO INPUT AUDIO INPUT L R SYTEM UP L V S RR Make the one of the capabilities 300 LL following connections, depending existing equipment. on of your Video Connection Connect the MONITOR OUT receiver to the VIDEO IN ips Depending to cable on your TV and other connect, there are equipment one jack on on the DVD/CD the TV using the video (V). you wish two ways you could connect the DVD/CD receiver. Use jack of the connections S-Video connection described below. Connect the S-VIDEO OUT Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the er to the S-VIDEO IN cable jack (not supplied) (S). jack on on the DVD/CD receiv- the TV using the S-Video best connections. Caution -- Make sure the DVD/CD receiver is connected to the TV. Select the correct AV -- directly your TV. Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. input on otes The S-VIDEO OUT jack will only output a signal when the function mode is set for CD/DVD. Before you connect the DVD/CD receiver to your TV, sure to turn off the power and unplug both units be from the wall power outlet before nections. making any con- 11 Connections External (Continued) Equipment Connections VCR Connections Panel LD* player, etc) VIDEO OUTPUT AUDIO OUTPUT R L RR (or 300 LL Connections er to the AUDIO er, etc. using (L/R) jacks on the DVD/CD receivOUT (L/R) jacks on the VCR, *LD play- ip Connect the AUX IN the audio cables. Press AUX source AUX appears * 12 on the remote control to select Aux jacks. Laser Disc on the Player Display Window. input Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best possible the cords. supplied speaker surround sound, adjust the speaker parameters; volume, distance, Center etc. Speaker Front Front Speaker (Right) Speaker (Left) RR 300 LL Subwoofer Rear Speaker (Right Surround) Rear Speaker (Left Surround) otes Be sure to match the speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack bass. If you use front speakers with low maximum input ratings, adjust the volume carefully to avoid excessive output on the speak- ers. Do not remove the front covers of supplied speakers. 13 SYTEM UP Connections Speaker Positioning For normal a setup use the 6 speakers (2 If you want to hear excellent bass woofer. ? Front Speakers speakers Set up the ? Center at an equal front speakers, center sound, DTS digital surround distance apart and ideally at an speaker, 2 rear speakers and subwoofer). Dolby Digital surround, you should connect or angle of 45 degrees from your a sub- listening position. Speaker It is ideal if the center speaker and front speakers are at the same height. But normally place the center speaker above or below the television. ? Rear Speakers right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse Place left and the sound. In the the ? case rear of a smaller speakers room above 60 - size, if the audience is 90 cm near than the listener's to the rear wall, set the rear ears. Subwoofer This can be placed in any front position. Subwoofer Center Front Speaker (Left) Speaker Front Speaker (Right) Rear Rear Speaker (Left) Speaker (Right) Speaker Positioning Example 14 speakers opposite each other, and set Before Operation Glossary for Mini Audio Stream & right speakers and subcompletely bypass the sound field processing. This allows you to play any source using only the front left and right speakers and subwoofer. woofer. Standard two channel Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources such as discs, DVD compact discs, etc. bearing the trademark. DTS Digital You tional of the degree sound field. The trademark of DTS Technology, LLC. under license from DTS Technology, LLC. term DTS is a Manufactured a true 360 (stereo) sources Sound Mode Surround delivers up to 6 channels of transparent audio (which means identical to the original masters) and results in excep- clarity throughout (2CH STEREO) the sound from the front left and Outputs Surround mode and BYPASS enjoy surround sound simply by selecting one pre-programmed sound fields according to the can program you want to listen to. Press SOUND MODE repeatedly until the sound mode display window as below. you want appears in the The Dolby Digital surround format lets you enjoy up to 5.1 digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. channels of "" When PCM indicator is display Each time you press SOUND MODE button, the sound changed in the following order; PRO LOGIC Use this mode when playing "" movie or Dolby Digital mark. This mode provides of in the mode is → PL2 MOVIE 3D SURROUND which carries the only displayed window: → → PL2 MUSIC → PL2 MATRIX → BYPASS 2 channel the effect being in a movie theater or live concert house an effect with an intensity which can only be obtained through DOLBY PRO LOGIC SURROUND. The effect of the front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynam- When a DVD is inserted. - ic than before. Dolby Pro Logic II creates five full-bandwidth sounds or the the remote on during playback. Although the DVD contents differ from disc-to-disc, the following explains the basic operation when this feature is used. changed sources. This is done using output channels an advanced, matrix surround decoder that extracts the high-purity properties of change the sound mode of DVD (Dolby Digital, DTS, LOGIC, etc.) by pressing the AUDIO button repeatedly can PRO Each time you press AUDIO button, the sound mode of DVD is in the following order; (II) from two-channel You original recording without adding →→→ spatial any new tonal colorations. For your reference MOVIE Mode: The Movie mode is for use with stereo television shows and all ? programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete settings ? 5.1-channel sound. MUSIC Mode: The DVD/CD Receiver memorizes the last mode for each source individually. identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. You can - The Music mode is for and provides a with any stereo music recordings, deep sound space. The Music mode use wide and includes controls that allow the sound to be tailored to individual listening tastes. - - MATRIX Mode: The Matrix mode is the the Music mode except that the logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the same as directional enhancement audio to otes If you play sound tracks with 96kHz output signals will be converted sampling frequency, (sampling fre- the to 48kHz quency). Sound Mode is not functional if a headphone is used. mono. 3D SURROUND This unit can produce a 3D Surround effect, using 3D Surround technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally required to listen to multi-channel Sound audio from a encoded with home theatre. This feature works with DVD discs Dolby Pro Logic and Dolby Digital audio tracks. 15 SYTEM UP Before General This manual Operation (Continued) Explanation operating the require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by gives Use 1/2 to 3 basic instructions for numbers DVD/CD receiver. Some DVDs the DVD/CD receiver or is not available on General screen. playback Some items On-screen can be the disc. 2 Repeat be TRACK ALL AB during playback. Use 3/4 to select a menu option will be option. setting an For some functions, setting. Title Repeat Chapter CHAPT Repeat Track Repeat All Tracks Repeat A-B Repeat Off Resume The selected number). Feedback Field Icons OFF 1 of be also be used for Temporary display operation Press DISPLAY title setting Feedback Field Icons displayed on the TV changed on the menu. can (e.g., can Temporary Display status the press ENTER to execute the TITLE On-Screen change The number buttons Action option. highlighted. play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available otes Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. on-screen DVD Menu Function (Use 3/4 to select desired option) Options Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language Digital Audio Output mode and Subtitle language Angle D 5.1 CH ABC OFF 1/1 Sound BYPASS VCD2.0 VCD1.1 Menu Options 0:20:09 Audio Channel to the desired title number. Shows the current chapters, and Shows the number and total number of chapter skips to the desired chapter elapsed playing time, and point directly from the elapsed searches the number. time. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and angle number and total changes the angle number. Shows the current sound changes the and PBC On Shows the BYPASS changes mode, and number of and number, total number of tracks skips to the desired track number. elapsed playing channel, time (Display only) and setting. 1/2,or AUDIO 1/2,or ANGLE 1/2,or Selection Method 1/2,or Numbers, ENTER -- 1/2,or the audio channel. the Numbers, ENTER SOUND MODE Shows the current sound changes 1/2,or Numbers, ENTER, SKIP 1/2,or setting. mode, 1/2,or Numbers, ENTER SUBTILE Shows the current angles, and setting. Shows the audio STER. 16 skips Shows the current track 1/4 Sound and Function (Use 3/4 to select desired option) Track Number Time titles, Selection Method AUDIO mode, and 1/2,or SOUND MODE Before Initial Operation (Continued) Language Settings You can set your own Personal Preferences DVD/CD receiver. on Disc the Language Select DVD language a for the disc's Menu, Audio, and Subtitle. Initial 1 Settings General Operation Original Other Press SETUP. The Setup Original Disc Subtitle English Disc Menu French Rating German original language set for the disc is selected. language, use the number buttons corresponding 4-digit number according to the Spanish Code Italian Aspect Menu The language code list on language code, press appears. Disc Audio Country : To select another enter the menu TV : English Disc Menu French Rating German Spanish Code Italian Aspect Menu Hungarian 5.1 Original Disc Subtitle TV Polish page 30. If you enter the wrong CLEAR. Disc Audio Country Chinese Language to Chinese Language Polish Other------------ Speaker Setup Hungarian Others 5.1 Other------------ Speaker Setup Others 2 Use 3/4 to select the The screen selected menu option. setting will show the current menu option, well as as for the Menu alternate Select setting(s). you 3 4 While the menu option is 3/4 to select the desired selected, use Language a see language setting. Disc Audio English Disc Subtitle Spanish Disc Menu French Country TV or PLAY to This is the menu remove Code Aspect Menu SETUP, RETURN, menu. Rating Press ENTER to confirm your selection. menu option require additional steps. Press setup 2, then Some 5 Setup for the when you press SETUP. Language the menu. 5.1 Speaker Setup Others Picture TV Aspect DVD 4:3 Letterbox: Select when nected. Displays a standard 4:3 TV is theatrical above and below the images picture. 4:3 Panscan: Select when a with masking con- bars conventional TV set is connected. The video material formatted in the Pan & Scan style picture are is played off). back in that style (Both sides of the cut 16:9 Wide: Select when a 16:9 wide TV is connected. Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating Country TV Menu 5.1 Code Aspect Language Speaker Setup Others 17 SYTEM UP Before Operation (Continued) Speaker Setup Auto You 5.1 Speaker settings Play DVD set up the DVD/CD receiver so a DVD disc automatically starts playing whenever a DVD is insert- DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setup", page 27.) can ed. If Auto Play will search play mode is set to a back the title On: Auto Off: Auto Play Play On, this DVD/CD receiver title that playback time automatically. is longest and then function is activated. function is not activated. Disc Audio Disc Subtitle R Disc Menu Country TV Code The Auto Volume 0 dB Size Aspect Menu ote R Front L Rating Small Distance Language 1 ft Test Return 5.1 Speaker Setup Others Others The DRC, Vocal, PBC and Auto Play settings can be changed. Use 3/4 to select the ENTER. The changed setting menu and press option of the selected menu option is between On and Off. Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC Rating Auto Country TV On Play Off Code Aspect Menu 5.1 Language Speaker Setup Others Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to audio digital technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the at a quietest ones). Then, you may losing clarity lower volume without listen to a movie of sound. Set DRC to On for this effect. Vocal Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are CDs. 18 to On or Off. played according to the PBC. played the same way as Audio Play function may not work for some DVDs. Before Operation (Continued) Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country to the applies complete the disc. These scenes on disc from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are are TV 6 5 Rating 1 4 Code 3 Aspect Speaker Setup Unlock Speaker Setup Select the Others using Country 2 step 3 4 5 6 selection, Code is 1 2 While 3 When you have not entered a password. Enter a 4-digit password using the number buttons "Rating" on the Setup menu using the 3/4 buttons. 3 of Shift the "Rating" to create a is selected, press 2. "Rating" personal 4-digit security password. then 4-digit password again and tons to confirm the Changing pass- If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Ratings 1 to 8: Some discs contain scenes played. Higher rated unless an alternative scenes scene is available The alternative must have the lower one. back will or 5 If no the same on rating suitable alternative is stop. You change will not be 1 Follow Enter the old 3 Select level in played the disc. or a found, play- 4-digit password order to play the disc. Press ENTER to confirm your rating then press SETUP to exit the menu. Steps 4-digit 1-2 as code shown above to the left (Rating). code, then press ENTER. Change using 3/4 buttons then press ENTER. 5 new 4-digit code, then press exactly the same code a second fy by pressing ENTER. 6 Press SETUP to exit the 4 Enter the ENTER. Enter time and veri- If you menu. If you selection, forget forget 4-digit your your password, code to clear the current pass- word, follow the procedure below. 1 Press SETUP to 2 Use the Number buttons to enter the display the Setup menu. 6-digit number "210499". must enter the rating the is necessary when the 4-digit code" not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be button and select the 3/4 buttons. 4-digit password changed (see "Changing 2 a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. the 3/4 buttons. ote below.). personal 4-digit security left. using Confirmation of the the code is word, then press ENTER. on Press ENTER to confirm your country code then press SETUP to exit the menu. When you have already registered a password; Enter a 4-digit password using the numbered but- Select using 2 using cursor second character press ENTER. Enter the press ENTER to verify. on selected, press 2. Select the first character Select the 3/4 buttons menu. Follow Change Code Country setup While 2 Language 1 5.1 Language Others Disc Menu Menu Code Aspect Menu 5.1 7 TV US Rating Country 8 Disc Subtitle Country SYTEM UP Code Set Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list List", page 31.). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated whose standards country/area Code (See "Country to or scenes are a used to rate the DVD video The 3 4-digit password Enter a new code is cleared. as shown above to the left (Rating). ote This function may not work for some DVDs. 19 DVD and Video CD Playing a DVD and Video CD Playback Setup Turn on Operation VCD2.0 DVD the TV and select the video General Features ote VCD1.1 input Unless stated source con- nected to the DVD/CD receiver. Audio the 1 system: Turn input source the audio on system and select connected to the DVD/CD receiver. Press OPEN/CLOSE to open the disc 2 Load your chosen disc in the playback side facing down. 3 Press OPEN/CLOSE to close the READING appears starts automatically. Moving tray. When tray, with the tray. might is or displayed may be displayed first after Video CD which offers a menu. view, then press ENTER Press TITLE loading a or title/chapter you playback. to start MENU to return to the menu screen. Press RETURN to return to the setting can move to (0-9) to select Press 1 2 to select title number. a a title, then press ENTER. to another CHAPTER/TRACK 1 /12 VCD1.1 a title on a more chapter/track disc has than as 1/3 one more than track, you one chapter can move or a to another follows: briefly during playback beginning of the current chapter/track or to select the next chapter/track. Press SKIP/SCAN . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, menu screen. chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9) or press 2 to select the chapter/track, then press ENTER. operating procedures for depending on the disc. the menu may differ Follow the instructions on the each You also may set PBC to Off under 18. menu screen. setup. See page ote For two-digit numbers, press (0-9)in rapid succession. Search otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental 1 and the exact using Control", on page (see 19). DVDs may have a regional code. Your receiver will not play discs that have code different from your receiver. The for this receiver is 1 (one). a regional regional code DVD VCD2.0 the numbered buttons VCD1.1 1 Press and hold SKIP/SCAN . two seconds or > for about during playback. The receiver will now go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). to select the 3 To return to normal 20 title, you press DISPLAY. Then, press 3/4 to select the Use the number buttons to select the track you want to view. -- one Press SKIP/SCAN .or > VCD2.0 -- than to return to the Use the 1 234 buttons to select the Menu more follows: DISPLAY, then press the appropriate number disc has DVD want to as Press Moving menu screen DVD disc has button When The a DVD a menu screen DVD appear instead. If to another TITLE another title the TV screen, and playback If playback does not start, menu use 1/3 on press PLAY. In some cases, the disc otherwise, all operations described the remote control. Some features may also be available on the Setup menu. play, press PLAY. DVD and Video CD General Features Still Picture and VCD2.0 DVD can To during playback. advance the pressing A* VCD1.1 The DVD/CD receiver will now go into PAUSE mode. picture frame-by-frame by repeatedly on the remote AB repeat sequence in a " A* " VCD2.0 1 Press SLOW SCAN m briefly begins (" Time Search title: a the TV again on starting point. screen. at your chosen end point. the TV screen, and the repeat appears the display window). " 0:20:09 DVD -:--:-- The Time Search function allows you to start any chosen time on the disc. during playback. The DVD/CD receiver will enter SLOW mode. 2UsetheSLOWSCANmorMtoselectthe 1 Press DISPLAY required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). To return to normal play, press PLAY. display appears ote The during playback. the on at playing on-screen screen. The Time Search box shows the elapsed playing time of the current disc. 2 Within 10 seconds, press 3/4 Search icon in the on-screen to select the Time display. The "-:--:--" appears in the Time Search box. Slow motion playback in is not reverse applicable for 3 Within 10 Video CD. the seconds, required Repeat CHAPT DVD VCD2.0 TITLE TRACK DVD Video Discs repeat the the number buttons to enter right hours, minutes, and in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD1.1 ALL OFF 4 Within 10 seconds, press ENTER confirm the start time. Repeat Chapter/Title/Off - use start time. Enter seconds from left to 1 To VCD1.1 3 To cancel the sequence, press REPEAT A-B. VCD1.1 M or on "AB" appears press PLAY. DVD briefly appears sequence Slow Motion VCD2.0 OFF 2 Press REPEAT A-B control. play, DVD 1 Press REPEAT A-B at your chosen PAUSE/STEP 3 To return to normal 3 A-B Repeat (continued) Frame-by-frame playback 1 Press PAUSE/STEP 2 You Operation (Continued) currently playing chapter, Playback an press invalid starts from the selected time or on press PLAY to the disc. If you enter time, playback will continue from the current point. REPEAT. The 2 To Repeat Chapter icon appears on the TV 3D Surround screen. repeat the title currently playing, press REPEAT VCD2.0 DVD VCD1.1 a BYPASS 3D SUR second time. The Repeat 3 To exit The Title icon appears Repeat mode, Repeat on the TV screen. press REPEAT Off icon appears on the TV a This unit third time. screen. 1 To repeat The 2 To - Repeat the track Repeat currently playing, on press REPEAT. the TV repeat the disc currently playing, press REPEAT The Repeat The Repeat mode, Repeat on the TV instead of the five speakers, speakers normally required on the TV a from two or to listen to home theater system. 1 Press SOUND MODE to select "3D SUR" during a 2 To turn off the 3D Surround again effect, press SOUND to select "BYPASS". screen. press REPEAT Off icon appears effect, which conventional stereo MODE All icon appears 3D Surround playback. screen. second time. 3 To exit a multi-channel audio from Track/All/Off Track icon appears produce playback more Video CDs can simulates multi-channel audio a third time. screen. ote On a setup Video CD with menu to use PBC, you the Repeat must set PBC to Off on the function. See page 17. 21 OPERATION DVD and Video CD General Features Zoom VCD2.0 DVD Operation (Continued) (continued) during playback or still the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, level press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. playback magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the normal resume playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Title Menu DVD 1 Press TITLE. If the current title has screen. ote The Zoom function may not work for some 2 The DVDs. Marker Search VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle 3 To menu menu will appear angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on may appear. again. VCD1.1 Disc Menu MARKER SEARCH 1/9 DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special DVD 1 Press MENU. You nine can points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a During disc playback, press MARKER when playback reaches the spot that you want to Camera on the TV briefly. screen 1 to enter up to nine Marker Repeat step points on a disc. To Recall DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene a Angle If the disc contains memorize. The Marker icon will appear 2 The disc to angle appears on the TV a screen. 1 ENG 1 disc During playback, The MARKER SEARCH 2 Within 10 press SEARCH. menu will appear seconds, press 1/2 buttons to select a or use on the screen. the number Marker number that you want to recall. 3 Press ENTER. will start from the Marked Playback 4 To remove scene. the MARKER SEARCH menu, press Changing the Audio Language Press AUDIO ferent audio 1 a During disc playback, The MARKER SEARCH Press AUDIO repeatedly during playback to hear (STER., LEFT or RIGHT). 2 on the screen. dif- a DVD ABC 1 ENG different subtitle repeatedly during playback languages. to see the ote Press CLEAR. If Repeat steps 2 and 3 to erase additional Marker numbers. 5 VCD1.1 ferent audio channel erase. The Marker number will be erased from the list. 4 dif- a Press 1/2 to select the Marker number that you want to 3 will appear VCD2.0 Press SUBTITLE press SEARCH. menu to hear the Audio Channel Subtitles Marked Scene 5.1 CH Changing SEARCH. To clear repeatedly during playback language or audio track. D DVD To remove SEARCH. 22 the MARKER SEARCH menu, press appears, the feature is not available on the disc. Audio CD and MP3 Disc Playing an Audio CD or MP3 CD Disc Notes can CD-ROM, CD-R on or play playing MP3 recordings, Recordings on right. MPEG1 audio read the notes on files that have MP3 1 disc and close the can not read file extension other than a an MP3 file that ".mp3". tray. CD; Audio CD menu appears on the TV go to step 4. MP3 disc; The MP3-JPEG choice menu appears on the TV screen. Go to step 2 Audio MP3 Disc screen compatibility limited follows: 1. 2. 3. 4. 2 compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". The DVD/CD receiver has a Recordings An MP3 file is audio data MP3 formatted record- CD-RW discs. Before Insert MP3 on About MP3 MP3 The DVD/CD receiver ings Operation Use 3/4 to select the MP3 then press ENTER PLAY. or The MP3 menu appears on the TV screen. Press RETURN to move to the MP3-JPEG choice menu. as Sampling Frequency / only at 44.1kHz Bit rate / within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We recommend that you use "Easy-CD Creator", which - creates 5. with this receiver is A single an ISO9660 file session disc track. If there is not no system. requires MP3 files in the first MP3 file in the 1st MP3 files. If you wish to format all the data in the disc or playback files, track, it can- playback MP3 use a new one. 6. File names and must should be named incorporate ".mp3" using 8 letters or less extension e.g. "********.MP3". Use 3/4 to select a folder, and ENTER 3 A list of files in the folder appears. 4 Use 3/4 to select a or PLAY. track then press PLAY the current track's or elapsed playing time will appear on the display window and Playback will stop at the end of the disc. Press TITLE to move Audio CD Menu menu. to the next page. move Press MENU to to the previous Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files the disc should be less than This DVD/CD receiver requires discs/recordings to meet optimal playback quality. Pre-recorded DVDs are automatically certain technical standards in order to achieve set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 files). That require certain pre-existing conditions (see above) to insure compatible playback. page. MP3 Menu Customers should also note that required Program CD on 650. ENTER. Playback starts. During playback, 7. permission is in order to download MP3 files and music from the Internet. Our company has no right to grant such permission. Permission should always TRACK01 TRACK02 TRACK03 be TRACK04 TRACK05 sought from the copyright owner. TRACK06 TRACK07 Clear All TRACK08 STER. 0: 56: 18 BYPASS ip If you list, are use in return to the 5 To a file list and want to return to the Folder the 3/4 to and highlight previous menu screen. stop playback at any other press ENTER to time, press STOP. 23 OPERATION Audio and MP3 Disc CD Pause 3D Surround MP3 1 Press PAUSE/STEP during playback. 2 To return to ENTER playback or In > to go to the next track. briefly to step back to of audio CD, directly to any track, enter the numbered buttons (0-9) to go using during playback. CD MP3 repeat the track currently playing, press REPEAT. Repeat icon and "TRACK" appears the on menu screen. 2 To repeat all tracks disc, press REPEAT on a a sec- ond time. The Repeat 3 To cancel The icon and "ALL" appears Search icon and "OFF" appears CD two seconds during playback. The now will menu screen. on the a third time. menu screen. MP3 1 Press and hold SKIP/SCAN . player the on press REPEAT Repeat mode, Repeat > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). to select the Search speed and direction are indicated on the menu screen. 3 To return to Repeat To 1 repeat CD sequence. During disc playback, sen starting point. The Repeat icon and "A 2 Press REPEAT A-B The press PLAY. playback, A-B a Repeat press REPEAT A-B at your cho* " appears on the menu screen. at your chosen end point. icon and "AB" appears on the menu screen, and the sequence again begins to play repeatedly. 3 To exit the sequence and return to normal REPEAT A-B again. The 24 Repeat a 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- a home theater or system. during playback. 2 To turn off the 3D Surround MODE again effect, press SOUND to select "BYPASS". Changing the Audio Channel Press AUDIO repeatedly during playback to hear a (STER., LEFT, or RIGHT). different audio channel Repeat Track/All/Off The produce track. the track number 1 To can simulates multi-channel audio channel audio from MP3 briefly during beginning of the current or to return to the previous case or CD 1 Press SOUND MODE to select "3D SUR" Press SKIP/SCAN . twice the CD another Track Press SKIP/SCAN . track This unit press PLAY, PAUSE/STEP playback, again. Moving to Operation (Continued) icon and "OFF" appears on the play, press menu screen. CD JPEG Disc Viewing Operation JPEG disc a Press SKIP/SCAN . This DVD/CD receiver play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. 1 Insert a to another File Moving JPEG can disc and close the The MP3-JPEG choice on appears Press PAUSE/STEP during The DVD/CD receiver will the TV 2 To return to the slide screen. PAUSE/STEP To The JPEG menu on appears the TV or To rotate screen. to the viewing a previous file. slide show. now go into PAUSE mode. or press again. flip the picture horizontally Press 3/4 to select the JPEG then press ENTER. or show, press PLAY Press 3/4 while 2 while once Still Picture 1 tray. menu > or to advance to the next file picture Press 1/2 showing vertically. Notes during showing on Depending the flip picture picture clockwise picture to picture a or a picture to rotate the counterclockwise. JPEG Recordings upon the size and number of the JPEG a long time for the DVD/CD receiv- files, it could take Press 3/4 to select 3 PLAY. a folder, and press ENTER or er to read the disc's contents. If you don't A list of files in the folder appears. Press RETURN to move to the MP3-JPEG choice menu. --- Total number of files and folders list, " are use " on the disc should be less than 650. ip If you see an on- display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen in file list and want to return to the Folder a the 34 buttons on the remote to highlight When you are using software such as Creator" to burn the jpeg files into the and press ENTER to return to the previous Some disc may be incompatible due to different recording format or condition of disc. menu screen. that all the selected files have the If want to view you 4 highlight a or Viewing During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to move press 3/4 to PLAY. particular file, file and press ENTER the file proceeding starts. a when copying move to to the next page. CD ensure ".jpg" extensions layout. If the files have rename to into the CD "Easy CD-R, File them names ".jpe" or ".jpeg" extensions, please as ".jpg" files. without be read by files shown are ".jpg" extension will not be able to this DVD/CD receiver. Even as JPEG image though the files in windows explorer. Press MENU to move to the viewing Slide previous page. ip There are three Speed options: Fast, to highlight the Slide select the option you want to Normal, Slow, and Off. Press 1/2 Speed then press 3/4 to use, and press ENTER. 5 To stop viewing The JPEG menu at any other time, press STOP. appears. 25 OPERATION Programmed Playback Programmed Playback CD VCD2.0 with Audio CD VCD1.1 The function enables you to store your favorite tracks from any disc in the player memory. Program Program during playback or in Program Edit mode. mode to enter the E The mark will appear to the right of the word the right side of the menu screen. on ote On a Video CD with setup menu to must set PBC to Off PBC, you the use on the function. See page 18. Program contain 30 tracks. can Press PROGRAM 1 with Video CD Programmed Playback MP3 Disc or MP3 the stop Program Insert Video CD and close the 1 2 Press PROGRAM while The VCD Program menu tray. playback is stopped. will appear. Program VCD E TRACK 1 TRACK 2 ote TRACK 3 Press PROGRAM to exit the Program Edit TRACK 4 mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 Program to place the list. ote 2 to Repeat step Program list. 3 place on the Press RETURN, PROGRAM PLAY to exit the or Program menu. E Program CD additional tracks TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 3 TRACK 10 TRACK 4 TRACK 3 3 Follow steps 2-6 of "Programmed Playback Audio CD and MP3 disc" on with left. TRACK 5 To TRACK 7 Clear All TRACK 8 0: 56: 18 STER. normal BYPASS resume "PROG." indicator Audio CD Menu Press 2. The programmed track you selected last is highlighted on the program list. Use 3/4 to select the track you want to start Press PLAY or playback, a Repeat the program second time. on icon and "ALL" appears Repeat mode, Repeat on on the TV the TV press REPEAT icon and "OFF" appears on screen. list, press screen. third time. a the TV screen. ENTER to start. Playback stops after have played once. 7 REPEAT The in the order in which you programmed the tracks and "PROG." appears on the menu screen. resume window. Tracks icon and "TRACK" appears Repeat repeat all tracks To cancel move 6 Playback begins display repeat the track currently playing, press REPEAT. The to the next page. Press MENU to move to the previous page. To To The To 5 playing. Press TITLE to in the disappears MP3 Menu Repeat Programmed 4 from playback 4 programmed playback, press PROGRAM. TRACK 6 all of the tracks normal select a on the Program list Erasing a Track from the 1 Press PROGRAM MP3 disc only) or Program List during playback (Audio CD and to enter the Program Edit stop mode. playback from programmed track of CD (or MP3) list and then press ENTER or PLAY. "PROG." indicator disappears in the display window. E The mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing 1 Follow List" as the whole steps 1-2 of Program "Erasing complete Program The programs 26 a list. List Track from Program above. 2 Use 3/4 to select "Clear The Program are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. Additional Information Speaker Setup Adjust the following settings for the built-in 5.1 channel Last Condition surround decoder. DVD CD Memory VCD1.1 Disc Audio This DVD/CD receiver memorizes the Disc Subtitle R Disc Menu Code Volume Menu 0 dB Size Aspect switch off the player. If you load a disc that tings memorized, the latest stop position is ly recalled. Small Distance Language user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or Front L Rating Country TV R 1 ft Test has its setautomatical- Return 5.1 Speaker Setup otes Others -- -- 1 Select "5.1 Speaker Setup" using buttons the 2 While "5.1 on setup the 3/4 is This you switch off the DVD/CD receiver before mencing to play it. menu. Speaker Setup" Settings player stored in memory for use any time. does not memorize settings of a disc if are com- selected, press 2 button. Press 2 buttons to select the desired 3 4 Adjust options by using Speaker Select speaker. 341 2 buttons. selection speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), Subwoofer)) a ers ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Volume Press 1 / 2 to speaker. (-6dB adjust the output +6dB) level of the selected ~ Size Since the speaker settings settings. the are fixed, you cannot change Distance If you connected speakers to your DVD/CD receiver setting the Distance lets the speakers know how far the , sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. (1 ft = 30.48 cm) ote You can not set the distance of subwoofer speaker. Test Press ENTER to test the Adjust signals of each speaker. signals the volume to match the volume of test memorized in the Front Left Rear Left (L) (L) system. → Front → Rear Right (R) Right (R) → Centre → Subwoofer → Return Press ENTER to return to the previous menu. 27 OPERATION Radio Operation Presetting You can ing, make the radio stations 30 stations for FM and AM. Before tun- preset that you have turned down the volume. sure Press BAND 1 on the remote control until FM AM appears in the 2 3 display or window. And then every time you press AM changes alternately. or panel for about two seconds frequency indication starts to change, 2 until the appear in the stereo (for or FM appears in the dis- window. play Press PRESET +/- repeatedly to select the pre- set station you want. Each time you press the button, the DVD receiver tunes in one preset station at a time. the volume when the DVD/CD Receiver tunes in display Press BAND until AM then by rotating VOLUME on the by pressing VOLUME + or on the control repeatedly. 3 Adjustpanel release. station. "TUNED" and "STEREO" 1 The last received station is tuned in. on the front Scanning stops Preset radio stations in the DVD/CD receiver's memory (see "Presetting radio stations" on the left). first FM and BAND, Press and hold TUNING to the radio Listening front a remote program) window. or - To turn off the radio Press POWER to turn the DVD/CD receiver off another function mode ote "TUNED" appears when the only signal To listen to 4 A on the front panel. or to select the on the front preset number you or For manual For automatic want. 6 7 on the front panel again. 3 to 6 to store other stations. To select You station with a Press TUNING a weak to tune in the station signal repeatedly or in step 3 manually. To clear all the stored stations Press and hold MEMORY for about two seconds and "CLEAR ALL" is then press appeared in the display window and MEMORY again, the stations are cleared. If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to normal mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change above. 28 the preset number, follow the steps a 5-6 in step 2. tuning, or press and hold TUNING on the front as preset radio station directly a can use to select To tune in select panel. The station is stored. Repeat steps tuning for about two seconds or Press MEMORY automatic tuning, press TUNING panel repeatedly. the front on Press TUNING or AUX). non-preset radio stations Use manual preset number will flash in the display window. 5 panel or is FM and STEREO. Press MEMORY (CD/DVD the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 a (within 3 seconds). For your reference If an FM program is noisy Press MONO/STEREO. panel so that display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo "STEREO" disappears on the front in the effect. To improve reception supplied antennas. Reorient the Radio Timer Sleep You can cally 1 at Dimmer Setting set the DVD/CD receiver to turn off automati- a specified The SLEEP indicator and sleep sleep time. time appears in the dis- window. Each time you press SLEEP the in the following order. setting changes SLEEP 90→80→70→60→50→40→30→20→10→ OFF can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The display on Press the change the brightness of the display panel during in power-on status. DIMMER repeatedly. the front Mute Press MUTE to mute your unit. can mute your unit in order, for You the telephone, window. remaining time appears in the to example, "MUTE" indicator flashes in the answer display window. Using Headphone ote You This function will window time. Press SLEEP to set the desired play 2 Operation (Continued) Connect a stereo Jack headphone plug ( 3.5mm) into the PHONES connector. The plug speakers are automatically disconnected in a headphone (not supplied). when you 29 OPERATION Language Code Enter the (See appropriate 17). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 30 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 19). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor Coast IN India NU Niue IO British Indian Ocean NZ New Zealand US United States Uruguay Kingdom Outlying CI Ivory CK Cook Islands CL Chile Territory OM Oman UY CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Verde Anguilla Islands Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic Islands (French) State (British) (USA) 31 REF NC Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, a disc. (Check ? The TV is not set to receive DVD signal ? output. Select the on the TV ? The video cable is not connected ? securely. no appropriate video input mode the picture from the DVD/ sound or The connected TV power is turned off. ? Turn The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is poor. does not start the TV. ? input mode of the so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? jacks you can hear the sound from the DVD/CD receiver. securely. The DVD/CD receiver on audio receiver signal output. ? screen. Connect the video cable into the ? a the TV on securely. ? very low-level sound is heard. The is so CD receiver appears only display lit.) picture. There is into the audio CD indicator in the DVD does not work. No service. connecting cable is damaged. dirty. Turn on the equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. or display is lit.) ? An disc is inserted. unplayable ? Insert a playable disc. the disc (Check type, color system and Regional code.) ? The disc is placed upside down. ? Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV ? ? screen. on the disc tray correctly guide. Clean the disc. Press the SETUP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? Wipe function Rating or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The dirty. and speakers components poorly. ? are ? connected ? The DVD/CD receiver is located too close to the TV. 32 rating Clean the disc. Connect the speakers and components securely. ? Move your TV away from the DVD/CD receiver. Troubleshooting (Continued) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset preset or ? Tune in the station manually. ? Preset the stations (page 28). REF NC stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? properly. ? The remote control is not pointed DVD/CD receiver remote sensor. at the ? The remote control is too far from the ? DVD/CD receiver. ? There is an obstacle in the Point the remote control at the DVD/CD receiver remote Use the remote control within about 23 ft path of the sensor. (7 m). ? Remove the obstacle. ? Replace remote control and the DVD/CD receiver. ? The batteries in the remote control flat. are the batteries with new ones. 33 Specifications Power Refer to back label supply consumption Power Refer to back label [Genral] Weight Size(WxHxD) Operating conditions Operating humidity 5.9 Laser Semiconductor PAL [CD/VD] Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video [Video] [Tuer] AM [MW] laser, wavelength 625/50, NTSC 525/60 More than 75 dB Designs 34 nm (1 kHz, NOP, 20 kHz LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω 1.0 % 1.0 V output 1 108 MHz range Intermediate frequency 87.5 Signal-to-noise ratio Frequency response Tuning range Intermediate frequency 55 dB Stereo mode 30W+30W(4Ωat1kHz,THD10%) Front: 30W + 30W (THD 10 %) - 10.7 MHz 150 530 - - (Mono) 10,000 Hz 1,720 kHz 450 kHz (* Depending on the sound mode settings and the source, there may be no sound output.) Center*: 30W Outputs S-VIDEO Surround*: 30W 30W + Subwoofer*: 50W (8Ω (4Ω at 30 kHz, THD 10 %) Hz, THD 10 %) at 1 MONITOR Satellite [Suplied Acesori ] 650 More than 65 dB PHONES: [Speakrs] status: Horizontal 100 Hz to 18 kHz Surround mode [Amplifer] 35°C, Operation 5% to 85% Tuning [FM] 5°C to Temperature: output S-video kg 360x82x344mm 1 Type Impedance Frequency response (32 Ω, 22mW) Speaker (LHS-D6235T) Way Speaker - 1 Way (1m) 20W H x D) 1 (LHS-D6235W) Speaker 8Ω 20,000 Hz 83 dB/W Rated x Passive Subwoofer 4Ω 130 Sound pressure level input power Max. input power Net dimensions (W Net weight 1 50 - 1,500 Hz 82 dB/W (1m) 40W 40W 80W 88x100x95mm 160x350x325mm 0.54 kg 4.12kg ?Speakers...........................6?Speakercables......................5 ?Remotecontrol......................1?Batteries(AAA).......................2 ?AMloopantenna.....................1?FMantenna.........................1 ?Videocable.........................1 and specifications are subject to change without notice. P/NO : 3828R-D031A ">
Advertisement