LG | LH-D6245D | Owner's Manual | LG LH-D6245D Owner's manual

LG LH-D6245D Owner's manual
LH-D6245D JA5TUL1_ENGLISH
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6245
(Main Unit: LH-D6245D,
Speakers: LHS-D6245T, LHS-D6245W)
CD-R/RW
Before
connecting up, operating
please
read this instruction booklet
or
repairing this product,
carefully and completely.
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the instructions accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this equipment in
such as a book case or similar unit.
a
confined space
CAUTION:
This DVD/CD receiver
To
employs
a
Laser
System.
proper
product, please read this owner's
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service location (see service procedure).
ensure
use
of this
manual
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the apparatus.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
product is manufactured to comply with the
requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
This
radio interference
73/23/EEC.
2
unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
Table of Contents
Audio CD and MP3/WMA Disc
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
Operation
PlayingAudioCDsorMP3/WMADiscs
NotesonMP3/WMARecordings.
.
Precautions.............................5
22-23
.
.
.
.
.
.
.
.
.
.
.22
.22
Search.............................23
NotesonDiscs..........................5
RepeatA-B.........................23
AboutSymbols..........................5
Front Panel Controls and Display Window
RearPanelConnections.....................8
.
.
.
SelectingTracks.....................23
RepeatTrack/All/Off...................23
PlayableDiscs...........................4
RemoteControlOverview....................7
.
.
.
Pause.............................23
BeforeUse..............................4-5
Indicators.................................6
.
.
.
3DSurround........................23
AudioChannelSelection...............23
JPEGFileOperation.......................24
ViewingJPEGFiles......................24
SelectingFiles.......................24
StillPicture.........................24
Preparation
FlippingthePicture...................24
RotatingthePicture...................24
Connections............................9-13
AM-FMAerialConnections..................9
NotesonJPEGFiles..................24
TVConnection..........................10
ProgrammedPlayback.....................25
Audio CD and MP3/WMA Disc Programmed
Playback..............................25
.25
VideoCDProgrammedPlayback.
SpeakerSetup............................26
.11
ExternalEquipmentConnection.
.12
SpeakerSystemConnections.
SpeakerPlacement......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mode.................................14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
InitialSetup.........................16
Language..........................16
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
SystemSelect..........................26
RadioOperation........................27-28
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Dimmer...............................28
Picture.............................16
Mute.................................28
SpeakerSetup.......................17
UsingHeadphoneJack...................28
Others.............................17
ParentalControl......................18
Operation
.19-21
DVDandVideoCDOperation
DVDandVideoCDPlayback...............19
.
.
.
.
.
.
.
.
.
.
.
.
Reference
LanguageCodeList.......................29
CountryCodeList.........................30
Troubleshooting........................31-32
Specification.............................33
GeneralFeatures........................19
TITLESelection......................19
CHAPTER/TRACKSelection.
.
.
.
.
.
.
.
.
.
.
.19
About the
Search.............................19
Still Picture and
Frame-by-Frame Playback
.
symbols
Indicates hazards
20
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
SlowMotion.........................20
Repeat............................20
RepeatA-B.........................20
TimeSearch........................20
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
AudioLanguageSelection..............21
AudioChannelSelection...............21
Subtitles...........................21
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Manufactured under license from
Dolby Laboratories. "Dolby",
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
"Pro
Logic",
and the double-D
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996,
Inc. All rights reserved.
2000
Digital
Theater
Systems,
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
play
can
a
DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
or
or
CD-RW that contains
JPEG files.
Depending
the conditions of the
recording equip(or DVD±R, DVD±RW) disc
itself, some CD-R/RW (or DVD±R, DVD±RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
--
--
playback operations
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
(Video CD and audio CD only)
a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Sections of
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
designed by the software manufacturer,
playback features of the unit may not be available
Types
other functions may be added.
Make sure to also refer to the instructions
or
supplied
with
the DVDs and Video CDs. Some DVDs made for busipurposes may not be able to be
played
on
the
There
are
two
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
designed and manufacplayback of region "2" encoded DVD
2
software. The region code on the labels of some
DVDs indicates which type of player can play
those discs. This unit can only play DVDs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
tured for
4
types of video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
unit.
Regional
and still
of video CDs
disc content
ness
enabling
easily.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
some
feature content
you to locate the scene you want.
A scene is composed of one or several tracks.
otes on DVDs and Video CDs
Some
accompanying
Track
otes
--
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In addition, this unit
(DVD only)
DVD
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
shipping the unit
original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
The
setting up the unit
The picture and sound of a
When
nearby TV, VCR, or radio
during playback. In this case, position
may be disturbed
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
contact with the unit for a
leave marks
Cleaning
such
as
a
store the disc in its case.
light, as there may be a considerable temperature
increase inside the car.
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
quality.
cloth. Wipe
Before
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
on
insecticide spray,
or
long period
plastic products in
of time. They will
NO
the unit
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzene,
YES
the surface.
To clean the cabinet
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the exterior surfaces clean
use
the unit. Do not leave rubber
use a
discs
or
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents such as alcohol,
thinner, as these might damage the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD receiver is
a high-tech, precision device. If
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
the
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD.
Video CDs with the PBC
(playback control)
function.
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG files
on a
disc.
5
INTRODUC
Front Panel Control and
Display
Window Indicators
STANDBY/ON
OPEN/CLOSE
VOLUME
STANDBY indicator
FUNCTION/
Lights red when the receiver
Standby mode (off).
PLAY
controller
is in
DISC
DISPLAY
Remote
Window
Tray
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING
(DOWN/UP)/
SKIP/SCAN
Indicates current
Indicates current
surround mode
or
PHONES
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
mode indicators
function:
player
Playback, Pause,
MEMORY
indicator
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
DVD DVD disc loaded
VCD Video CD loaded
SVCD
Super
Video CD loaded
MP3 MP3 disc loaded
6
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control Overview
POWER
OPEN/CLOSE
(p. 19)
FUNCTION SELECTOR
Yo u
also select the desired
can
function with the FUNC./PLAY
the front
on
panel.
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
NUMBER
SLEEP
(p. 28)
SUBTITLE
PRO LOGIC II
(p. 21)
(p. 14)
AUDIO
(p. 14)
(p. 14)
SETUP (p. 16)
RETURN
(p. 19)
DISPLAY
(p. 15)
SOUND
ENTER
TITLE
ARROW
For
use
on a
GUI
in
highlighting
menu screen,
a
MENU
screen.
(p. 21)
the title
display
TITLE and
MENU
(p. 21)
Use the TITLE button to
selection
on
screen
included
DVD video discs.
SLOW SCAN
(Q
/
R)
(p. 20)
Use the MENU button to display
the menu screen included on DVD
video discs.
VOLUME
(+/-)
PRESET(+/-) (p. 27)
SKIP/SCAN
STOP
PAUSE/STEP
(p. 20)
MUTE
PLAY
(
) (p. 19)
/
(p. 28)
PROGRAM
(p. 25)
(p. 21)
REPEAT (p. 20, 23)
REPEAT A-B (p. 20, 23)
CLEAR
MARKER(p.
(p.
ANGLE (p.
ZOOM (p.
SEARCH
Remote Control
21)
21)
21)
21)
DIMMER
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
battery
cover on
the
rear
of the remote control, and insert two
(7 m)
from the front of the
R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
installation
Remove the
the buttons.
Distance: About 23 ft
battery
(p. 28)
with
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel Connections
SPEAKER Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
S-VIDEO OUT
Connector
S/VIDEO OUT
MONITOR OUT
MONITOR OUT
Connector
AM Antenna Connectors
POWER CORD
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
Connections
AM-FM Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
loop aerial to the AM aerial connector.
Connect the AM
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
PREATION
(supplied)
(supplied)
S/VIDEO OUT
MONITOR OUT
otes
To prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
FM wire
aerial, keep it
as
horizontal
as
possible.
9
Connections
(Continued)
TV Connections
Rear of TV
S-VIDEO
SCART INPUT
VIDEO
INPUT
AUDIO INPUT
INPUT
L
R
L
VIDEO Cable
V
S
T
Back of the DVD/CD receiver
SCART-RCA
Adaptor
TV/MONITOR
(SCART type)
S/
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
Connect the MONITOR OUT
cable
on
your TV and other
equipment
one
ROUT
jack
jack
on
on
the DVD/CD
the TV
using
the video
(V).
you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use
MON
Video connection
receiver to the VIDEO IN
ips
Depending
OUT
of the connections
S-Video connection
described below.
Connect the S-VIDEO OUT
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
er
to the S-VIDEO IN
cable
jack
jack
on
on
the DVD/CD receiv-
the TV
using
the S-Video
(S).
best connections.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
directly
input on your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
ip
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
otes
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
When you connect the DVD/CD receiver to your TV,
be sure to turn off the power and unplug both units
from the wall outlet before
10
making
any connections.
Connections
External
(Continued)
Equipment Connections
Rear of VCR
(or
LD
AUDIO OUTPUT
L
player, etc)
PREATION
VIDEO
OUTPUT
R
S/VIDEO OUT
MONITOR OUT
Connection
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
Connections
(Continued)
Speaker System Connections
Connect the
speakers using
To obtain the best
possible
Front
the
supplied speaker
surround sound,
Center
speaker
(Right)
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
S/VIDEO OUT
Rear speaker
(Right surround)
MONITOR OUT
Rear speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker cable
to the
appropriate terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
Do not
12
front
remove
speakers
the front
with low maximum
cover
of
input rating, adjust the volume carefully
supplied speaker.
to avoid excessive
output
on
the
speakers.
Connections
Speaker
In the
case
(Continued)
Placement
of normal
position
the 6
use
speakers (2
front
speakers,
centre
speaker,
2 rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
play
the excellent bass sound, DTS
Front speakers
According to your listening position
speakers to 45 degree.
Centre
set up the
speaker
speakers and front speakers
The centre
?
are
digital
surround
or
Dolby Digital surround,
speakers for equal distance. And by hearing position
ideally the
same
height.
But
normally place
it above
or
you should connect
a
set up the interval between
below the television.
Rear
speakers
right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
Place left and
the sound.
In the
rear
?
case
of
a
smaller
speakers above
60
room
size, if the audience is
90
than the listener 's
-
cm
near
to the rear wall set the rear
speakers opposite each other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
for Audio Stream &
Glossary
BYPASS
(2CH STEREO)
the sound from the front left and
right speakers and subcompletely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
Outputs
Surround mode
woofer. Standard two channel
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
identical to the original masters) and results in excepclarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
means
tional
(stereo)
sources
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
A) By pressing SOUND
button
Each time you press SOUND button, the sound mode is
in the following order;
changed
The
PRO LOGIC
channels of
PLII MATRIX
Dolby Digital surround format lets you enjoy up to 5.1
digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
"
Use this mode when
playing movie
"
which carries the
"
or
"
Dolby Digital
mark. This mode
NO
→
PLII MUSIC
LIVE
ROCK
POP
DANCE
TECHCLASSIC
SOFT
3D SURROUND
BYPASS
→
PLII MOVIE
→
→
→
→
→
→
→
→
→
→
...
ips
ROCK: Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
music.
CLASSIC: Reproduces the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
2 channel
provides the effect
being in a movie theatre or live concert house-an effect with
intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
of
an
ic than before.
B) By pressing
(II)
Dolby Pro Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
provides
a
Each time you press
PL II button, the sound mode
changed in the following order;
is
PRO LOGIC
PLII MATRIX
→
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
(This function available 2-channel mode only)
When DVD is inserted.
MOVIE mode:
The Movie mode is for
and
PL II button
use
wide and
with any stereo music recordings,
sound space. The Music mode
deep
Yo u
can
change the sound mode of
DVD
(Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button
on
the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
includes controls that allow the sound to be tailored to individual
listening
→→→
tastes.
MATRIX mode:
The Matrix mode is the
the Music mode except that the
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
same as
directional enhancement
audio to
mono.
3D SURROUND
can
speakers instead of the five
speakers normally required to listen to multi-channel
audio from
a
encoded with
14
-
-
the
DTS
logo.
Digital Surround
discs
are
marked with DTS.
a
back from two conventional stereo
or more
?
The DVD/CD Receiver memorizes the last mode
settings for each source individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
-
produce 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio play-
This unit
For your reference
?
home theatre. This feature works with DVD discs
Dolby Pro Logic and Dolby Digital audio tracks.
ote
Sound Mode is not applicable when headphone is used.
Before
General
This manual
Operation (Continued)
Explanation
operating the
DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
basic instructions for
the DVD/CD receiver
On-Screen
General
screen.
playback
1
2
is not available
on
displayed on the TV
changed on the menu.
status can be
can
be
display operation
Press DISPLAY
numbers
Press 3/4 to select
an
(e.g.,
title
can
setting
of
an
item.
be also be used for
number).
press ENTER to execute the
For
some
setting
functions,
setting.
Playback Status Displays
Repeat
TITLE
Title
CHAPT
Repeat Chapter
TRACK
Repeat
Track
Repeat
All Tracks
Repeat
A-B
ALL
AB
(non-PBC
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
OFF
Resume
during playback.
The selected item will be
the
change
The number buttons
the disc.
Display
Some items
On-screen
or
Press 1/2 to
3
Action
play
from this
prohibited
or
point
not available
item.
highlighted.
otes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
on-screen
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio language
and Digital Audio
Output
D
mode
Subtitle language
Angle
Sound
VCD2.0
1 ENG
5.1 CH
ABC
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/2,or
Numbers, ENTER
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
OFF
Shows the current subtitles language, and
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound mode, and
changes the setting.
1/2,or
BYPASS
1/2,or
SUBTILE
ANGLE
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
0:20:09
Shows the elapsed playing time (Display only)
STER.
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
Shows the current title number and total number of
to the desired title number.
titles, and skips
Selection Method
BYPASS
Shows the current sound mode, and
changes the setting.
Selection Method
1 /2,or
Numbers, ENTER
--
1
/2,or
AUDIO
1
/2,or
SOUND
15
PREATION
Before
Initial
Operation (Continued)
Language
Setup
You
can set your own Personal Preferences
DVD/CD receiver.
on
the
Disc
Language
Select
DVD
for the disc's Menu, Audio, and
language
a
Subtitle.
Initial
1
Settings
General
Operation
Press SETUP.
The setup
menu
appears.
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 29. If you enter the wrong language
Original
Other
:
The
:
To select another
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Spanish
Code
Italian
Aspect
Menu
English
Disc Menu
French
Rating
German
TV
Polish
Spanish
Code
Italian
Aspect
Menu
Hungarian
5.1
Original
Disc Subtitle
Country
Dutch
Language
Disc Audio
Dutch
Language
Polish
Other------------
Speaker Setup
Hungarian
Others
5.1
Other------------
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
will show the current
selected item,
as
well
as
setting for the
setting(s).
alternate
Menu
Select
3
While the desired item is selected, press 2, then
3/4 to select the desired setting.
Press ENTER to confirm
you
Language
a
see
language
selection.
your
4 Some items require additional
steps.
5 setup
SETUP, RETURN,
or
menu.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Press
for the setup
This is the
menu
when you press SETUP.
Menu
PLAY to exit the
Italian
Code
Aspect
Dutch
Language
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
16:9 Wide: Select when
a
sides of the
16:9 wide TV is connected.
Disc Audio
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Rating
Country
TV
5.1
Code
Aspect
Menu
Language
Speaker Setup
Others
16
style (Both
cut
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
You
DVD
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
Play
can
DVD
set up the DVD/CD receiver so a DVD disc
starts playing whenever the DVD is insert-
automatically
ed.
If Auto
Play
will search
play
mode is set to On, this DVD/CD receiver
title that playback time is longest and then
a
back the title
automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
Country
TV
ote
Code
Volume
Aspect
Menu
R
Front L
Rating
Language
The Auto
0dB
Size
Small
Distance
0.3
Play
function may not work for
some
DVDs.
m
Test
Return
5.1
Speaker Setup
Others
Others
The DRC, Vocal, PBC and Auto
Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
5.1
On
Play
Language
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Rating
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
the disc. These
scenes on
scenes are
are
TV
6
Speaker Setup
Select
4
Code
2
Language
1
Unlock
Speaker Setup
Follow
Change
Others
3 of
step
3
Select
4
Shift
5
6 selection,
"Rating"
the first character
1
Select
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
the
"Rating"
to create a
is selected, press 2.
personal 4-digit security password. then
4-digit password again and
using 2
using
using
the 3/4 buttons.
button and select the
3/4 buttons.
ote
below.).
tons to confirm the
Changing
pass-
left.
Confirmation of the
When you have already registered a password;
Enter a 4-digit password using the numbered but-
personal 4-digit security
on
2.
Press ENTER to confirm your country code
then press SETUP to exit the menu.
the code is
word, then press ENTER.
4-digit password
changed (see "Changing
the
4-digit
is necessary when
the 4-digit code"
code
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
1
Follow
2
3
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
ENTER.
4
Enter the
ENTER.
Enter
time and veri-
Select
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
1 to 8: Some discs contain
suitable for children. If you set
er, all disc
be
scenes
with the
an
alternative
scene
lower
one.
back will
If
change
same
on
rating
the disc.
or a
suitable alternative is found, playYou must enter the 4-digit password
no
stop.
the
rating
level in order to
play
ote
18
5
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
6
Press SETUP to exit the
If you
(Rating).
menu.
forget your 4-digit
code
some
DVDs.
If you
forget
your
password,
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
The
the disc.
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
This function may not work for
1-2 as shown above to the left
not
rating for the playrating or lower will
will not be played
is available
The alternative must have the
or
a
scenes
Steps
same
played. Higher rated scenes
unless
5
cursor
second character
press ENTER. Enter the
press ENTER to verify.
4
on
menu.
3
Aspect
the 3/4 buttons
Code
Country
using
1 the setup
While Country Code is selected, press
2
5
Rating
5.1
Language
Others
Disc Menu
Menu
Code
Aspect
Menu
5.1
7
TV
TR
Rating
Country
8
Disc Subtitle
Country
were
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
whose standards
Code Set
Disc Subtitle
The Parental Control feature allows
country-dependent.
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 30.).
3
4-digit password is cleared.
Enter
a new
(Rating).
code
as
shown above to the left
DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD
Operation
General Features
Playback
VCD2.0
the TV and select the video
VCD1.1
input
ote
source con-
nected to the DVD/CD receiver.
available
Audio system: Turn on the audio system and select
the input source connected to the DVD/CD receiver.
1
menu.
TITLE Selection
DVD
When
automatically.
If
playback
press PLAY.
In some cases, the disc
menu
playback
does not start,
might
If
is
DVD
or
more
than
one
title, you
to
can move
follows:
Press DISPLAY, then press the appropriate number
(0-9) to select a title number.
Press 1 2 to select
When
displayed
may be displayed first after
Video CD which offers a menu.
menu screen
as
button
DVD
a menu screen
disc has
a
title, then press ENTER.
CHAPTER/TRACK Selection
appear
instead.
The
a
another title
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
starts
on
use
1/3
chosen disc in the tray, with the
Load
the
Setup
Press OPEN/CLOSE to open the disc tray.
your
2 playback
side facing down.
3
Unless stated otherwise, all operations described
the remote control. Some features may also be
loading
a
a
disc has
title
on a
more
chapter/track
1/3
1 /12
VCD1.1
disc has
than
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
as
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the title/chapter you
view, then press ENTER to start playback.
want to
Press TITLE
or
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
and the exact
menu screen.
operating procedures
for
using
may differ depending on the disc.
Follow the instructions on the each menu screen.
1
ote
17.
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
Your receiver will
For
two-digit numbers, press
(0-9)in rapid succession.
Search
otes
--
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9) or press
2 to select the chapter/track, then press ENTER.
menu
You also may set PBC to Off under setup. See page
--
briefly during playback
beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
to return to the
page 18).
region code.
not play discs that
(see
DVD
VCD2.0
the numbered buttons
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
The receiver will
now
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
on
or
during playback.
>
repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
or
to select the
have
code different from your receiver. The
this receiver is 2 (two).
a region
region code
for
3 To return to normal
play,
press PLAY.
19
OPERATION
DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
Operation
A*
Frame-by-frame playback
VCD1.1
1 Press PAUSE/STEP
during playback.
now
go into PAUSE mode.
can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
Slow Motion
VCD2.0
"
appears
briefly
1 Press DISPLAY
display
on
again
on
CHAPT
VCD2.0
TITLE
TRACK
DVD Video Discs
1 To
repeat the
REPEAT.
The
2 To
-
is not
applicable
0:20:09
DVD
-:--:--
appears
during playback.
the
on
The
at
playing
on-screen
screen.
elapsed playing time of the
for
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and
right
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
ALL
OFF
4 Within 10
seconds, press ENTER
confirm the start time.
Repeat Chapter/Title/Off
currently playing chapter,
on
point.
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
VCD1.1
Repeat Chapter icon appears
at your chosen end
the TV screen, and the repeat
appears the display window).
"
seconds from left to
DVD
starting point.
screen.
current disc.
Video CD.
Repeat
the TV
The Time Search box shows the
ote
reverse
title:
The Time Search function allows you to start
any chosen time on the disc.
playback.
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
in
*
A
Time Search
2UsetheSLOWSCAN-morM+toselectthe
playback
"
briefly
sequence begins ("
VCD1.1
-
Slow motion
a
3 To cancel the sequence, press REPEAT A-B.
1 Press SLOW SCAN m or M + during
The DVD/CD receiver will enter SLOW mode.
3
sequence in
"A B" appears
press PLAY.
DVD
VCD1.1
OFF
2 Press REPEAT A-B
control.
play,
a
VCD2.0
1 Press REPEAT A-B at your chosen
2 You
3 To return to normal
DVD
AB
To repeat
The DVD/CD receiver will
A-B
Repeat
(continued)
the TV
Playback
an
press
repeat the title currently playing, press REPEAT
press PLAY to
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
3D Surround
screen.
or
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
Repeat Title icon appears
3 To exit
The
Repeat
on
the TV
screen.
mode, press REPEAT
Repeat Off icon appears
on
the TV
a
This unit
third time.
1 To
Repeat Track icon appears
on
the TV
screen.
repeat the disc currently playing, press REPEAT
a
second time.
The
Repeat
3 To exit
The
All icon appears
Repeat
on
the TV
screen.
mode, press REPEAT
Repeat Off icon appears
on
the TV
a
third time.
screen.
ote
On
a
setup
20
a
3D Surround effect, which
playback from two
speakers, instead of the
speakers normally required to listen to
multi-channel audio from
Repeat Track/All/Off
repeat the track currently playing, press REPEAT.
The
2 To
-
produce
conventional stereo
screen.
more
Video CDs
can
simulates multi-channel audio
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 17.
a
five
or
home theater system.
1 Press SOUND to select "3D SUR"
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "BYPASS".
DVD and Video CD
General Features
Zoom
VCD2.0
DVD
Operation
(continued)
during playback
still
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
magnification level
press the appropriate number button to select an option.
use the 1 234 buttons to highlight your selection,
then press ENTER.
or
If you press ZOOM repeatedly, the
increases up to six steps.
2 Use the 1 234 buttons to
playback
Or,
move
the zoomed
through
picture.
the
resume
the contents of DVD Video
Checking
activate the Zoom function.
3 Press CLEAR to
normal
playback
or
return to
paused image.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
VCD2.0
DVD
menu, the menu will appear on the
menu can
list
menu
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
DVD
1 Press MENU.
You
can
start
playback
from
a
memorized
point. Up
The disc
to
menu
nine points can be memorized.
To enter a mark, follow these steps.
2 To
1
Camera
During disc playback, press MARKER when
playback reaches the spot that you want to
2
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
a
displayed.
the disc menu, press MENU
remove
Angle
If the disc contains
memorize.
The Marker icon will appear
is
DVD
scenes
again.
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
angle appears
on
the TV
a
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
the
Audio
screen.
2 Within 10 seconds, press 1/2 or use the number
buttons to select a Marker number that you want to
recall.
will start from the Marked
scene.
1
a
During
disc
playback,
The MARKER SEARCH
2
Subtitles
Marked Scene
press SEARCH.
menu
will appear
on
the
screen.
VCD1.1
a
dif-
DVD
ABC
1 ENG
during playback
to see the
Press 1/2 to select the Marker number that you want
ote
Press CLEAR.
The Marker number will be erased from the list.
4
to hear a dif-
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Press SUBTITLE repeatedly
different subtitle languages.
to erase.
3
VCD2.0
5.1 CH
ferent audio channel
SEARCH.
To clear
repeatedly during playback
language or audio track.
Press AUDIO
4 To remove the MARKER SEARCH menu, press
D
DVD
Press AUDIO
ferent audio
Audio Channel Selection
3 Press ENTER.
Playback
Language Selection
Repeat steps
If
appears, the feature is not available
on
the disc.
2 and 3 to erase additional Marker
numbers.
5
To remove the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
Audio and MP3/WMA Disc
Operation
Notes
Playing Audio CD and MP3/WMA Disc
CD
MP3
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
Insert
Recordings
MPEG1 audio
files that have
on
The
right.
on
player
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read an MP3 file that has a file
extension other than
".mp3".
a
About
WMA(Window Media Audio)
An WMA file is
a
technology.
WMA(Windows
compression of
MP3 WMA
JPEG
MP3/WMA Disc
Microsoft audio
Media
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to
choice menu.
1.
2.
compatibility
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
as
-
-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
first track. If there is
3
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
4
Press 3/4 to select
ENTER.
track then press PLAY
or
File
MP3/WMA file in the 1st
or use a new one.
names
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
6.
and must
Playback starts.
During playback,
Press TITLE to
no
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
the disc
a
with this DVD/CD
follows:
-
3.
MP3 WMA
offers double the audio
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy32
to the MP3/WMA-JPEG
move
Audio)
compression
the MP3 format.
receiver is limited
2
Recordings
An MP3 file is audio data
play
can
disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
1
MP3/WMA
About MP3
WMA
The DVD/CD receiver
MP3/WMA
on
move
to the
previous page.
This DVD/CD receiver
requires discs/recordings to meet
optimal
playback quality. Pre-recorded DVDs are automatically
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK 1
TRACK02
set to these standards. There are many different
TRACK 2
TRACK03
TRACK 3
TRACK04
TRACK 5
TRACK06
TRACK 6
TRACK07
TRACK 7
Clear All
TRACK08
STER.
0: 56: 18
Audio CD
BYPASS
menu
Clear All
TRACK 8
00:00
1
MP3/WMA
OFF
menu
ip
If you
list,
are
use
in
return to the
5
22
a
file list and want to return to the Folder
the 3/4 to
To stop
and
highlight
previous menu screen.
playback
at any other
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
of recordable disc formats
TRACK 4
TRACK05
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
Audio and MP3/WMA Disc
Pause
CD
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
Selecting
press PLAY
Tracks
CD
or
>
Press SKIP/SCAN . twice
the previous track.
sen
starting point.
The
Repeat icon and "A
2 Press REPEAT A-B
WMA
*
"
appears
again
on
briefly during
or
to return to the
briefly
step back
to
to
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
Repeat Track/All/Off
CD
MP3
WMA
3 To exit the sequence and return to normal
REPEAT A-B again.
The
Repeat icon and "TRACK" appears
the
on
menu
Repeat icon and "OFF" appears
3D Surround
This unit
can
repeat all tracks
on a
disc, press REPEAT
a sec-
ond time.
Repeat icon and
"ALL" appears
on
the
The
Repeat mode,
produce
a
Search
CD
MP3
a
or
to listen to multi-
home theater system.
1 Press SOUND to select "3D SUR"
during playback.
2 To turn off the 3D Surround effect, press SOUND
again to select "BYPASS.".
the
a
third time.
menu screen.
Press AUDIO
CD
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
WMA
1 Press and hold SKIP/SCAN .
two seconds
The player will
on
menu screen.
3D Surround effect, which
speakers normally required
channel audio from
press
menu screen.
press REPEAT
Repeat icon and "OFF" appears
the
play,
CD
Audio Channel Selection
3 To cancel
on
point.
screen,
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
more
repeat the track currently playing, press REPEAT.
The
menu screen.
at your chosen end
screen.
2 To
the
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
during playback.
The
CD
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your cho-
press
the track number
1 To
A-B
The
Press SKIP/SCAN .
case
or
MP3
playback to go to the next track
beginning of the current track.
In
Operation (Continued)
or
> for about
during playback.
now
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH mode, press PLAY.
23
OPERATION
JPEG File
Operation
Viewing JPEG
This DVD/CD receiver
Files
Press SKIP/SCAN .
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
a
can
menu
appears
on
the
screen.
>
or
once
during viewing a
previous file.
to advance to the next file or to the
picture
Still Picture
1 Press PAUSE/STEP
disc and close the tray.
The MP3/WMA-JPEG choice
TV
another File
Selecting
JPEG
during
The DVD/CD receiver will
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP
now
again.
MP3 WMA
Flipping
JPEG
2
menu
appears
on
the TV
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
to
flip
the
screen.
Rotating picture
JPEG
Press 1/2
Folder1
Folder2
during showing
clockwise
picture
Folder3
or
a
picture
to rotate the
counter clockwise.
Folder4
Folder5
Folder6
Folder7
Notes
Folder8
Slide
Speed
JPEG Files
on
Off
upon the size and number of the JPEG
a long time for the DVD/CD
Depending
3
the files
ip
JPEG files to less than 2 mega
er disc.
If you
list,
files, it could take
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
are
"
"
in
file list and want to return to the Folder
a
the 34 buttons
use
on
the remote to
highlight
and press ENTER to return to the
previous
If
want to view a
a
particular file, press
file and press ENTER
or
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
3/4 to
PLAY.
to move to
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
Speed
Off
5/32
1024X768
Picture5.jpg
ip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
Speed
then press 3/4 to select the
option
you want to
use, and press ENTER.
To stop
viewing
5 The JPEG
24
menu
at any other
appears.
reduce the resolution of the
pixels
on
that all the selected files have the
when
copying
them
into the CD
and burn anoth-
the disc should
names
time, press STOP.
extensions
".jpe" or ".jpeg" extensions, please
".jpg" files.
without
".jpg"
extension will not be able to
this DVD/CD receiver. Even
by
files
shown
are
".jpg"
layout.
as
be read
explorer.
Slide
---
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
File
Folder1
1024X768
big
be less than 650.
If the files have
move
Picture1.jpg
5/32
too
Total number of files and folders
rename
to the next page.
Press MENU to move to the previous page.
JPEG
are
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
you
4 highlight
receiver to read the disc's contents. If you don't see
display after several minutes, some of
an on-screen
as
JPEG
image
though
the
files in windows
Programmed Playback
CD
VCD2.0
Audio CD and MP3/WMA Disc
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Press PROGRAM
1
mode to enter
during playback or in
the Program Edit mode.
E
mark will appear to the right of the word
the right side of the menu screen.
The
on
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 17.
Program
contain 30 tracks.
can
Programmed Playback
ote
Program
Program
WMA
Video CD
Programmed Playback
The
MP3
the stop
Program
can
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
is
playback
stopped.
will appear.
Program
E
TRACK 1
Press PROGRAM to exit the
the
menu
VCD
ote
E
OPERATION
contain 30 tracks.
Program
TRACK 2
Edit mode;
TRACK 3
TRACK 4
mark will
disappear.
TRACK 5
TRACK 6
TRACK 7
Select
track, then press ENTER
a
2 selected track
step
3 Repeat
Program
the
on
2 to
Program
place
to
place
list.
additional tracks
on
the
list.
Program
CD
ote
Press RETURN
E
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
PROGRAM to exit the
or
Program
menu.
E
3
TRACK 8
TRACK 1
Follow steps 2-6 of
"Programmed Playback
Audio CD and MP3/WMA disc"
on
To
from
with
left.
TRACK 3
TRACK 4
TRACK 5
Clear All
TRACK 8
the
TRACK 5
TRACK 6
TRACK 7
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Clear All
TRACK 8
BYPASS
00:00
3
normal
playback
4 programmed playback,
press PROGRAM.
TRACK 6
OFF
resume
"PROG." indicator disappears in the display window.
Audio CD
MP3/WMA
menu
menu
Repeat Programmed
4
Press 2.
The
programmed track you selected last is highlighted
on
the program list.
currently playing,
Repeat icon and "TRACK" appears
The
press REPEAT.
on
the
menu
screen.
Press 3/4 to select the track you want to start
To repeat all tracks on the program list, press
REPEAT a second time.
Press TITLE to
The
5 playing.
move
Press MENU to
move
to the next page.
to the previous page.
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
have
7
To repeat the track
Tracks
To
played
once.
normal
"PROG." indicator disappears
Erasing
a
Track from
on
the
menu screen.
Program
List
1 Press PROGRAM
MP3/WMA disc
playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
resume
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
To cancel
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
the
Erasing
1 Follow
List"
Complete Program
steps
as
Program list.
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear All", then press ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Code
Volume
Aspect
Menu
Language
0dB
Size
Small
Distance
0.3
user
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
Country
TV
R
switch off the player. If you load a disc that
tings memorized, the latest stop position is
ly recalled.
m
Test
has its setautomatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
menu.
Settings are stored in memory for use any
This player does not memorize settings of
you switch off the DVD/CD receiver before
mencing to play it.
disc if
com-
is selected, press 2
Speaker Setup"
button.
System
Press 2 buttons to select the desired
3
4 Adjust options by using
time.
a
speaker.
You must select the
TV
341 2 buttons.
Select
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC, or
AUTO).
Speaker
selection
Select
a speaker that you want to adjust. ((Front speak(Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
ers
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD receiver is connected
with Multi
NTSC:
ote
Certain
the
speaker settings are prohibited by
Digital licensing agreement.
PAL:
Press 1 / 2 to
adjust the output
+6dB)
level of the selected
~
Size
Since the
speaker settings
settings.
fixed, you cannot change
are
Distance
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
same
time.
(1
ft
=
30.48
cm)
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
speaker.
signals
the volume to match the volume of test
memorized in the system.
Front Left (L)
Centre
→
Rear
Right (R)
→
→
Front
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
26
Select when DVD/CD receiver is connected
with PAL-TV.
speaker. (-6dB
listener at the
with NTSC-TV.
Dolby
Volume
the
system TV.
Select when DVD/CD receiver is connected
previous
menu.
Radio
Operation
Radio stations
Presetting
preset 50 stations for FM and AM. Before
You
can
ing,
make
sure
on
the remote control until FM
AM appears in the
2
3
tun-
that you have turned down the volume.
Press BAND
1
display
or
window.
And then every time you press BAND, FM and
AM changes alternately.
Press and hold TUNING
or
on
the front
panel for about two seconds
frequency indication starts to change,
appear in the
(for
stereo
1
Press BAND until AM
play
or
FM appears in the dis-
window.
The last received station is tuned in.
2
Press PRESET +/-
repeatedly
to select the pre-
set station you want.
Each time you press the button, the DVD receiver tunes in
one
then
preset station
at a time.
by rotating VOLUME on the
by pressing VOLUME + or on the
control repeatedly.
the volume
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
Preset radio stations in the DVD/CD receiver's memory
(see "Presetting radio stations" on the left).
first
until the
release.
Scanning stops
to the Radio
Listening
a
3 Adjustpanel
front
remote
program)
display window.
or
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
only
appears when the
signal
on
the front
Use manual
panel.
For manual
preset number will flash in the display window.
the front
on
Press TUNING
5 panel
or
to select the
on
the front
preset number you
want.
or
automatic
7
Press MEMORY
on
the front
panel again.
select
in
step
2.
For automatic
tuning,
or
press and hold TUNING
for about two seconds
on
the front
panel.
The station is stored.
Repeat steps
tuning
tuning, press TUNING
panel repeatedly.
or
6
or
AUX).
To listen to non-preset radio stations
Press MEMORY
A
or
is FM and
STEREO.
4
(CD/DVD
3 to 6 to store other stations.
To select
You
preset radio station directly
a
can use
the number buttons
on
the remote control
to select a
To tune in
a
station with
Press TUNING
a
weak
to tune in the station
signal
repeatedly
or
in
step 3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
then press
appeared in the display window and
MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
change
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
"STEREO"
on
the front
disappears
in the
effect.
To
improve reception
supplied antennas.
Reorient the
to normal mode.
ote
If all stations have
already
been entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
a
the preset number, follow the steps 5-6
as
above.
27
OPERATION
Radio
Timer
Sleep
You
can
cally
1
Operation (Continued)
Dimmer
Setting
set the DVD/CD receiver to turn off automati-
at a
specified
window
time.
Press SLEEP to set the desired
The SLEEP indicator and
sleep
sleep time appears
time.
in the dis-
play window.
2
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The
display
28
on
Press the
change the brightness of the display
panel during in power-on status.
DIMMER repeatedly.
the front
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
the
telephone,
window.
remaining
time appears in the
to answer
example,
"MUTE" indicator flashes in the
display
window.
Using Headphone
ote
You
This function will
Connect
a
stereo
Jack
headphone plug ( 3.5mm)
into the
PHONES connector.
The
plug
speakers are automatically disconnected
in a headphone (not supplied).
when you
Language Code
Enter the
(See
appropriate
16).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
29
Country
Enter the
Code List
appropriate
code number for the initial
setting "Country Code" (See
page
18).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
30
Republic
(French)
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Cause
Symptom
No power.
?
The power is on, but
the DVD/CD receiver
?
Correction
The power cord is disconnected.
?
No disc is inserted.
?
does not work.
No
?
The TV is not set to receive DVD
signal
?
output.
?
The video cable is not connected
?
securely.
no
sound
or
?
very low-level
sound is heard.
a
The equipment connected with the
audio cable is not set to receive DVD
?
The audio cables
not connected
are
?
?
is poor.
The DVD/CD receiver
does not start playback.
?
?
Connect the video cable into the
jacks
urn on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD receiver.
the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
Select the appropriate video input mode
on the TV so the picture from the DVD/
CD receiver appears on the TV screen.
?Connect
securely.
playback picture
into the
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
?T
signal output.
?
The
securely
securely.
?T he connected TV power is turned off.
only
Plug the power cord
wall outlet.
lit.)
picture.
There is
service.
connecting
The disc is
cable is
damaged.
dirty.
?T
?
?
No disc is inserted.
urn on
the
equipment
connected with
the audio cable.
?
it with
Replace
new one.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
?
An
unplayable
disc is inserted.
?
Insert
a
playable
disc.
the disc
(Check
type, colour system and Regional code.)
?
?
?
The disc is
placed upside
The disc is not
The disc is
?Amenu
is
placed
down.
within the
?
guide.
dirty.
on
the TV
?
?
?
screen.
Place the disc with the
down.
playback
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
Press the SETUP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the Rating function
rating level.
or
change
the
Loud hum
heard.
or
noise is
?
?
?
?
The
plugs
and
The disc is
jacks
are
?W
ipe them with a cloth
tened with alcohol.
dirty.
dirty.
The speakers and components
connected poorly.
?
are
The DVD/CD receiver is located too
close to the TV.
?
slightly
mois-
Clean the disc.
Connect the
speakers
and components
securely.
?
Move your TV away from the audio
components.
31
REF NC
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
positioned
Correction
or
connected
poorly.
?
?
?
The
signal strength of the stations is
(when tuning in with automatic
tuning).
too
Connect the antenna
?T
une
in the station
weak
?N
stations have been preset or preset
stations have been cleared (when
o
?
securely.
the antennas and connect
external antenna if necessary.
Adjust
Preset the stations
an
manually.
(page 27).
tuning by scanning preset stations).
The remote control
does not work properly.
?T he remote control is not
?
?
?
32
pointed
at the
?
remote sensor of the DVD/CD receiver.
The remote control is too far from the
DVD/CD receiver.
There is an obstacle in the path of the
remote control and the DVD/CD
receiver.
The batteries in the remote control
flat.
are
Point the remote control at the remote
of the DVD/CD receiver.
sensor
?
?
?
Use the remote control within about 23
ft (7 m).
Remove the obstacle.
Replace
the batteries with
new ones.
Specification
Power
Power
[Genral]
Refer to main label
Mass
External dimensions
[CD/VD]
(W
x
H
x
D)
AM
[MW]
x
75
x
Laser
Semiconductor laser,
PAL 625/50, NTSC 525/60
Designs
to
35°C, Operation
status: Horizontal
wavelength
650
REF NC
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
1.0 V
108.0 MHz
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
-
or
65.0
-
74.0 MHz, 87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
+
Subwoofer*: 60W
25W
(8Ω
(6Ω
at 30
kHz, THD 10 %)
Hz, THD 10 %)
at 1
MONITOR
Satellite
[Suplied Acesori ]
mm
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PHONES:
[Speakrs]
314
5% to 85%
Surround mode
[Amplifer]
kg
360
Temperature: 5°C
S-video output
[FM]
3.8
Operating conditions
Operating humidity
Video output
[Video]
[Tuer]
Refer to main label
supply
consumption
1
Type
Impedance
Frequency Response
Way
1
Speaker
1
Way
(1m)
25W
H
x
D)
1
(LHS-D6245W)
Speaker
8Ω
20,000 Hz
-
81 dB/W
Rated
x
Passive Subwoofer
6Ω
140
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 20mW)
Speaker (LHS-D6245T)
60
-
1,500 Hz
80 dB/W
(1m)
60W
50W
120W
89x130x114mm
160x350x345mm
0.5
kg
4.5
kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
and
specifications
are
subject
to
change
without notice.
33
P/N: 3834RH0039L
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising