LG LH-T551TB Owner's manual

LH-T551TB_JA8MLLA_ENG_129N
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T551TB
(Main Unit: LH-T551
Speakers: LHS-55TBS, LHS-55TBC,
LHS-55TBW)
R
Before connecting up, operating or repairing this
product, please read this instruction booklet
carefully and completely.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
NO USER-SERVICEABLE PARTS INSIDE
Do not overload wall outlets. Overloaded wall outlets, loose or
REFER SERVICING TO QUALIFIED SERVICE
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of
PERSONNEL.
these conditions could result in electric shock or fire.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user
about the presence of uninsulated dangerous
voltage within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
The exclamation mark within an equilateral triangle
walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
important operating and maintenance (servicing)
instructions in the instructions accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION:
This DVD/CD receiver employs a laser system.
To ensure proper use of this product, please read this owner's
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service location (see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
vases, should be placed on the apparatus.
2
servicer.
shock to persons.
is intended to alert the user about the presence of
as
Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
AudioCDandMP3/WMADisc...............21
Playing an Audio CD and MP3/WMA Disc
.
.
.
.
.
21
BeforeUse..............................4-5
Pause.............................21
PlayableDiscs...........................4
MovingtoanotherTrack...............21
RepeatTrack/All/Off...................21
Precautions.............................5
NotesonDiscs..........................5
Search.............................21
AboutSymbols..........................5
FrontPanelandRearPanel..................6
JPEGDiscOperation......................22
ViewingaJPEGdisc.....................22
RemoteControlOverview....................7
SlideShow.........................22
StillPicture.........................22
Preparation
Connections............................8-11
TVConnections.........................8
OptionalEquipmentConnections
.
.
.
.
.
.
.
.
.
.
.
.9
Movingtoanotherfile.................22
Torotatepicture......................22
ProgrammedPlayback.....................23
RepeatProgrammedTracks................23
.23
ErasingaTrackfromProgrammeList
the
List
23
Erasing
Complete Programme
DivXDiscOperation.......................24
SpeakerSetup............................25
.
AerialConnections........................9
10
Assembling and Connecting to the Speakers
.10
ToHangtheCentreSpeakeronawall.
SpeakerSystemConnection...............10
SpeakerPositioning......................11
BeforeOperation.......................12-17
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
Mode.................................12
SoundMode...........................12
On-ScreenDisplay.....................13
InitialSettings........................14-17
GeneralOperation....................14
Language..........................14
Display..........................14-15
Audio..............................15
Lock(ParentalControl)................16
Others.............................17
Operation
DVDorVideoCDOperation...............17-20
PlayingaDVDandVideoCD...............17
GeneralFeatures.....................18-20
MovingtoanotherTITLE/GROUP.
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.18
.
18
SlowMotion.........................18
Still Picture and Frame-by-Frame Playback
.
18
Search.............................18
Repeat............................18
RepeatA-B.........................19
TimeSearch........................19
MarkerSearch.......................19
Zoom..............................19
SpecialDVDFeatures....................20
TitleMenu..........................20
DiscMenu..........................20
ChangingtheAudioLanguage.
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.20
.20
Subtitles...........................20
DVDAudioDiscs........................20
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
ScreenSaver...........................26
SystemSelect..........................26
ControllingtheTV.......................26
OperationwithRadio......................27
Presettingtheradiostations................27
Listeningtotheradio.....................27
OtherFunctions...........................28
SleepTimerSetting......................28
Dimmer...............................28
Mute.................................28
UsingtheHeadphoneJack................28
SelectingtheInputSource.................28
XTS(ExcellentTrueSound)................28
XTSpro...............................28
Reference
LanguageCodeList.......................29
CountryCodeList.........................29
Troubleshooting........................30-31
Specifications
Introducin
Before Use
Playable Discs
ote on DTS-encoded CDs
DVD
(8cm/12cmdisc)
DVD audio discs
(8cm/12cmdisc)
Video CD (VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit can play a DVD-RW, DVD+RW,
SVCD and CD-R or CD-RW that contains audio titles,
MP3, WMA, JPEG or DivX files.
When playing DTS-encoded CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the
volume gradually, and keep the volume level low. To
enjoy DTS Digital Surround playback, an external 5.1
channel DTS Digital Surround
decoder system must
be connected to the digital output of the unit.
TM
TM
Disc-related terms
Title (DVD only)
The main film content or accompanying feature content
or additional
feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
otes
Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc
itself, some CD-R/RW (or DVD-RW, DVD+RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Group (DVD audio discs only)
The main audio content or accompanying feature content or additional feature content, or music album. Each
otes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
group is assigned a group reference number enabling
you to locate it easily.
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
Scene (VCD)
disc content designed by the software manufacturer,
On a Video CD with PBC (Playback control) functions,
some
or
playback features of the unit may not be available
other functions may be added.
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
Make sure to also refer to the instructions supplied with
menu screen
the DVDs and Video CDs. Some DVDs made for busi-
you to locate the scene you want.
ness
purposes may not be able to be played on the
and assigned a scene number, enabling
A scene is composed of one or several tracks.
unit.
Types of Video CDs
Regional code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is designed and manufactured for
playback of region "5" encoded DVD software.
The region code on the labels of some DVDs
5
indicates which type of player can play those
discs. This unit can only play DVDs labeled "5" or "ALL".
If you try to play any other discs, the message "Check
Regional Code" will appear on the TV screen. Some
DVDs that have no region code label may still be subject
to area restrictions and therefore not playable.
There are two types of Video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials may
come
in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can distort the picture
sound quality. Before playing, clean the disc
with a clean cloth. Wipe the disc from the centre outor reduce
wards.
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the
unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth
lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzene, or thinner, as these might damage the surface
Do not use strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
spray intended for vinyl records.
About Symbols
of the unit.
About the
To obtain a clear picture
The DVD/CD Receiver is a high-tech, precision device.
If the optical pick-up lens and disc drive parts are dirty
the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
or worn,
symbol display
""
may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available on that specific DVD-Video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
Notes on Discs
Disc Handling
DVD-V
DVD Audio discs.
VCD2.0
Video CDs with the PBC (playback control)
function.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
VCD1.1
get on the surface.
Do not stick paper or tape on the disc.
DVD and finalized DVD±R/RW.
DVD-A
Video CDs without the PBC (playback control)
function.
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
DivX
DivX disc.
5
Introducin
Front Panel and Rear Panel
STANDBY/ON
PHONES connector
STANDBY indicator
Lights red when the receiver
is in Standby mode (off).
DISC Tray
FUNCTION/PLAY
Press and hold down this button about 3
seconds, then press repeatedly to select
other function.
VOLUME controller
DISPLAY Window
OPEN/CLOSE button
Remote sensor
USB host
MONO/STEREO/
Connect to a USB port of
PAUSE/STEP
multimedia
(USB memory etc.)
TUNING(-/+)/SKIP(-/+)
buttons
STOP
Power Cord
SPEAKER connectors
FM Antenna connector
AV2 AUDIO Input (L/R)/VIDEO IN
Connectors
L
AUDIO
R
8
8
8
8
AV2 IN
8
AV1 IN
AM Loop Antenna connectors
S-VIDEO OUT connector
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y Pb Pr inputs.
AV1 AUDIO Input (L/R)/VIDEO IN Connectors
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
6
Remote Control Overview
POWER
OPEN/CLOSE ( Z )
Opens and closes the disc tray.
DVD
AUX
Select the output source (CD/DVD) or
Selects input source.
DVD
TV
accesses
BAND
Select the
SLEEP
SLEEP
System's tuner (FM and AM
bands)
MUTE
0-9 numerical buttons
directly
Mute the speakers.
numbered options in a
SUBTITLE
menu.
XTS pro
To
Selects a subtitle language (DVD).
SUBTITLE
RETURN
enjoy more natural and realistic
sound.
AUDIO
SOUND
MRAKER
-
SEARCH
To enjoy great sound effect.
PRESET/
CH
Marks a point during playback.
SEARCH
AUDIO
+
Selects an audio language (DVD) or
audio channel (CD).
..
Displays MARKER SEARCH menu.
DISPLAY
Accesses On-Screen display.
SOUND MODE
INPUT
Selects the sound mode.
Selects the TV's source.
SETUP
-
Accesses or removes setup menu
Removes the setup menu.
MARKER
XTS
an
Set the System to turn off automatically.
at a specified time.
MUTE
Select a service, programme number
or select
To control the TV. (LG TV only)
.
Accesses the menu on a DVD disc.
SCAN
ENTER
Acknowledges the menu selection.
SCAN-/+(bb/BB)
PRESET/CH(+/-) (v/V):
Search backward or forward.
Select programme of TV or Radio.
SLOW-/+(t/T)
Reverse/ Forward slow playback.
REVERSE SKIP( . )
b/B/v/V (left/right/up/down)
Selects an option in the menu.
MENU
TUN(-/+) (b/B):
To tune in the desired radio station.
SKIP
Search backward*/go to beginning of
current chapter or track or go to
previous chapter or track.
FORWARD SKIP( > )
Search forward*/go to next
chapter or track.
PROG.
Accesses or removes Program menu.
MEMO.
Enter a radio station's frequency into
the tuner.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
REPEAT
Repeat chapter, track, title, all.
REPEAT A-B
Repeats sequence.
TITLE
Displays the disc's Title menu, if available.
VOLUME (+/-)
To adjust speaker volume and TV volume.
PLAY (B)
Starts playback.
PAUSE/STEP (X)
Pause playback
STOP (x)
Stops playback.
ZOOM
Enlarges the DVD video image.
DIMMER
Press to change brightness of the
display window on the front panel during in power-on status.
USB
To enjoy the multimedia files.
Remote Control Operation Range
Remote control battery installation
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote sen-
Remove the battery cover on the rear of the
sor
Angle: About 30° in each direction in front of the remote sensor
remote control, and insert two R03 (size
AAA) batteries with
correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
and
aligned
Introducin
Connections
TV Connections
Make one of the following connections, depending on
Progressive Scan (ColorStream pro)
the capabilities of your existing equipment.
connection
If your television is a high-definition or "digital ready"
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connection
methods described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
Make sure the DVD/CD Receiver is connected directly
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding in jacks on the
TV using an optional Y Pb Pr cable (C).
to the TV. Select the correct AV input on your TV.
Do not connect your DVD/CD Receiver to TV via your
Rear of TV
VCR. The DVD image could be distorted by the copy
protection system.
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
S-Video connection
Y
Pb
Pr
Connect the S-VIDEO OUT jack on the DVD/CD
Receiver to the S-VIDEO IN jack on the TV using the
S-Video cable (S).
Video connection
Connect the MONITOR OUT jack from the DVD/CD
S
Receiver to the VIDEO IN jack on the TV using the
V
C
video cable supplied (V).
Component Video (Color Stream ) connection
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding in jacks on the
TV using an Y Pb Pr cable (C).
L
AUDIO
R
AV2 IN
AV1 IN
Rear of DVD/CD Receiver
otes
Set the Progressive to "On" on the Setup menu for
progressive signal, see page 15.
Set the progressive to "Off" by removing any disc
from the unit and close the disc tray. see that "no
disc" is displayed on the display window. Then, press
STOP and hold it for five seconds before releasing it.
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
Connections (Continued)
Optional Equipment Connections
1
2
3
Connect a VCR to the AV1 IN connectors.
Connect a additional VCR to the AV2 IN connectors.
Connect the USB port of a USB Memory (or MP3 player, etc.) to the USB HOST on the front of the unit.
Prepa tion
VCR
OUT
IN
O
Additional VCR
Front of DVD/CD Receiver
IN
OUT
To AUDIO OUT (L/R)/
VIDEO
VIDEO OUT
AUDIO (L)
AUDIO (R)
To AUDIO OUT (L/R)/
VIDEO OUT
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
To AUDIO IN (L/R)/
VIDEO IN (AV1)
To AUDIO IN (L/R)/
VIDEO IN (AV2)
L
AUDIO
R
88
888
AV2 IN
AV1 IN
otes
If the audio format of the digital output does not match the capabilities of your DVD/CD Receiver, the receiver will
produce a strong, distorted sound or no sound at all.
The DivX files in your memory card will not be able to be play.
Aerial Connections
Connect the supplied FM/AM aerial for listening to the radio.
Connect the AM Loop aerial to the AM aerial connector.
Connect the FM Wire aerial to the FM aerial connector.
AM Loop aerial (supplied)
FM Wire aerial (supplied)
L
AUDIO
R
88
888
AV2 IN
AV1 IN
otes
To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After connecting the FM Wire aerial, keep it as horizontal as possible.
9
Connections (Continued)
Assembling and Connecting to
Speaker System Connection
the Speakers
cords.
The front and rear speakers are detached from the
To obtain the best possible surround sound, adjust the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
Connect the speakers using the supplied speaker
speaker parameters (volume, distance, etc.).
stands as illustrated.
Front speaker
Front speaker
(Left)
(Right)
Connect the speaker cords to the appropriate terminals on the bottom of each front and rear speaker.
After connecting the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker and attach the front and rear speakers to
the speaker stands.
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Center speaker
8
8
8
8
8
Subwoofer
ote
You cannot detach the speaker from the stand after assem-
bling the front and rear speakers.
To hang the centre speaker on a
wall
You can hang the Centre Speaker on a wall.
Detach the stand by rotating the screw on the
1 bottom
2
of the Centre Speaker.
Attach the stand by rotating the screw on the
rear of the
Centre Speaker.
otes
Be sure to match the speaker cable to the appropriate
terminal on the components: + to + and
are
it via hole on the rear side of the Centre
Hang
3 Speaker
10
on
the screw.
--
to --. If the cables
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
adjust the volume carefully to avoid excessive output on the
speakers.
Do not remove the front cover of supplied speaker.
Connections (Continued)
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subwoofer). If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should
connect a subwoofer.
?
?
Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the interval between
speakers to 45 degree.
Centre speaker
The centre speakers and front speakers are ideally the same height. But normally place it above or below the television.
?
Rear speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each other, and set the
rear
?
speakers above 60
-
90 cm than the listener 's ears.
Subwoofer
This can be placed in any front position.
Subwoofer
Centre Speaker
Front Speaker
Front Speaker
(Right)
(Left)
Rear Speaker
Rear Speaker
(Right)
(Left)
Speaker Positioning Example
About Ferrite Core (OPTIONAL)
Be sure to attach the ferrite core to the speaker
cables (for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1 Press the stopper [a] of the ferrite
core
to
open.
2 Wind the cable
once on
the ferrite core.
The length here is
88
3 Close the ferrite
core
unitl it clicks.
888
short as much as
possible.
Note:
Attach the ferrite core near the unit (Refer to the fig.3
and comment.).
11
Prepa tion
Before Operation
Mini Glossary for Audio Stream &
Sound Mode
Surround mode
You can enjoy surround sound simply by selecting one
DVD
VCD2.0
VCD1.1
CD
of the pre-programmed sound fields according to the
program you want to listen to.
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of
transparent audio(which means identical to the original
masters) and results in exceptional clarity throughout a
true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
When DVD is inserted
You can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
a) After you select 2 channel (For example
3 ENG
2 ENG
D
2CH
or
) by pressing AUDIO button, press SOUND
D
2CH
button repeatedly.
Bypass
Music
Movie
Matrix
The Dolby Digital surround format lets you enjoy up to
5.1 channels of digital surround sound from a Dolby
If you play DVDs with
"
"
b) After you select 5.1 channel (For example
Digital program
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
source.
1 ENG
D
5.1 CH
or
4 ENG
) by pressing AUDIO button, press SOUND button.
DTS
5.1 CH
-"
-
"
indicator will be displayed on the TV screen.
"BYPASS" indicator will be only displayed on the display
window.
(II)
Dolby Pro Logic II creates five full-bandwidth output
channels from two-channel sources. This is done using
an
advanced, high-purity matrix surround decoder that
extracts the spatial properties of the original recording
without adding any new sounds or tonal colorations.
MOVIE mode:
When Video CD is inserted
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window in the
following order.
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
→
→
→
→
→
→
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches the quality of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
Right and Stereo of audio channel will be
displayed on the TV screen.
The Left,
recordings.
When CD is inserted
MATRIX mode:
The Matrix mode is the same as the Music mode
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
except that the directional enhancement logic is
following order.
turned off. It may be used to enhance mono signals
by making them seem "larger." The Matrix mode may
BYPASS
STUDIO
CLUB
HALL
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo reception may be
simply to force the audio to mono.
→
→
→
→
→
→
→
→
→
For your reference
?
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
-
-
BYPASS
-
Software with multichannel surround audio signals is
played according to the way it was recorded.
ote
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
12
Before Operation (Continued)
On-Screen Display
You can display the general playback status on the TV
screen.
Some items can be changed using the menu.
To use the on-screen display:
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b / B, Numbers
ENTER
1
2
Press DISPLAY during playback.
Chapter Number
1/12
ENTER
Press v / V to select an item.
The selected item is highlighted.
Time search
0:20:09
Audio language
3
Prepa tion
b / B, Numbers
Press b / B to change the setting. You can also
and Digital Audio
the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Output mode
use
PLAYBACK STATUS/RESTRICTIONS
Title
Repeat title
Subtitle language
Numbers, ENTER
b/Bor
AUDIO
A BC
1 ENG
b/Bor
SUBTITLE
Angle
1/3
Sound
Bypass
b/B
b/B
Repeat sequence
A-B
Resume play from this point
Action prohibited or not available
Example: On-Screen Display during
playing VCD
Selection Method
Items
otes
Track Number
Some discs may not provide all of the features
shown below.
If no button is pressed for 10 seconds, the onscreen
1/3
b / B, Numbers
ENTER
(or PBC mode)
Numbers
Time search
0:20:09
ENTER
display disappears.
b/Bor
Audio Channel
AUDIO
Sound
Bypass
b/B
Example: On-Screen Display during
playing DVD Audio
Selection Method
Items
b / B, Numbers
Group Number
ENTER
b / B, Numbers
Track Number
ENTER
Time search
0:20:09
Audio language
b/Bor
and Digital Audio
AUDIO
Output mode
Subtitle language
Display only
OFF
ABC
Display only
b/B
Page (or Angle)
or
1/3
13
Before Operation (Continued)
Initial Settings
LANGUAGE
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
item, see pages 14 to 17.
To display and exit the Menu:
Press SET UP to display the menu. A second press of
SET UP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Move
Select
OSD
Press b on the remote control.
Select a language for the Setup menu and on-screen display.
General Operation
Disc Audio / Subtitle / Menu
1
Press SET UP.
The setup menu appears.
Use v / V to select the desired option then
2 press
B to move to the second level.
The screen will be shown the current setting for the
selected item, as well as alternate setting(s).
3
4
Use v / V to select the second desired option
then press
B to move to the third level.
DVD-A
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number
buttons to enter the corresponding 4-digit number
according to the language code list on page 30. If you
enter the wrong language code, press CLEAR on the
remote control.
Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
5
DVD-V
DISPLAY
DISPLAY
Press SET UP or PLAY to exit the setup menu.
TV Aspect
16:9
Display Mode
Widescreen
Progressive Scan
Off
Move
TV Aspect
DVD-V
Select
DVD-A
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
DVD-V
DVD-A
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
14
Before Operation (Continued)
Progressive Scan
AUDIO
Progressive Scan Video provides the highest quality
pictures with less flickering.
Set the DVD/CD Receiver's AUDIO options according to
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the receiver to a standard (analog)
Each DVD disc has a variety of audio output options.
the type of audio system you use.
television, set Progressive Scan to Off.
Prepa tion
AUDIO
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
5.1
progressive scan signal, set Progressive Scan to On.
Speaker Setup
Select
DRC
On
Vocal
On
Select "Progressive Scan" on the DISPLAY
1
menu
then press B
.
DISPLAY
Move
TV Aspect
Off
Display Mode
On
5.1 Speaker Setup
Progressive Scan
DVD-V
Select
DVD-A
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25)
Move
Select
Dynamic Range Control (DRC)
2
3
Select "On" using the v / V buttons.
The confirm menu will appear.
track in the most accurate and realistic presentation
4
When the confirm menu appears on your screen
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Press ENTER to confirm your selection.
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
5
Pressing ENTER will set the DVD/CD Receiver
to Progressive scan mode.
DVD-V
DVD-A
DivX
With the DVD format, you can hear a program's sound-
possible, thanks to digital audio technology. However,
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing dialog intelligibility.
Set DRC to On for this effect.
otes
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
The DRC function works only during playback of
Dolby Digital recorded discs.
The level of Dynamic Range Compression may differ
depending on the DVD disc.
to On in error, you must reset the unit.
Vocal
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window
2) Press and hold STOP ( x ) for five seconds then
DVD-V
Set Vocal to On only when a multi-channel Karaoke
DVD is playing. The karaoke channels on the disc will
mix into a normal stereo sound.
release it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
15
Before Operation (Continued)
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
LOCK
Rating
Unlock
Password
****
1
Select Password on the LOCK menu then press B.
2
Country Code
Follow step 2 as shown left (Rating). "Change" or
"New" is highlighted.
3
Enter the new 4-digit code, then press ENTER.
Input it again to verify.
4
Move
Press SET UP to exit the menu.
Select
If you forget your Security Code
Rating
DVD-V
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain parental
If you forget your security code you can clear it using
the following steps:
1
Input the 6-digit number "210499" on the setup menu
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
and the security code is cleared.
2
Enter a new code as described above.
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The parental control feature allows you to block access
to scenes below the rating you
input, thereby preventing
your children from being able to view material you
believe is unsuitable.
Select "Rating" on the LOCK menu then, press
1
2
B
ote
When
"
"
appears on the TV screen,
STOP
and
then
press
(x)
press SET UP to move to the
INPUT PASSWD
setup menu.
Country Code
DVD-V
.
To access the Rating, Password and Country
Code features, you must input the 4-digit
security code you created.
Enter the code of the country/area whose standards
were
used to rate the DVD-Video disc, based on the list
in the reference chapter.
Select
Code" on the LOCK menu, then
prompted to do so.
1 press "Country
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
2
Follow step 2 as shown left (Rating).
3
4
Select the first character using v / V buttons.
If you have not yet entered a security code you are
3 Selectaratingfrom1to8usingthev/V
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
B.
Shift the cursor using B button and select the
second character using v / V buttons.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the DVD/CD Receiver, all disc
scenes
with the same rating or lower are played. Higher
rated scenes are not played unless an alternate scene
is available on the disc. The alternative must have the
same
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
Press ENTER to confirm your rating selection,
4 then press
16
SET UP to exit the menu.
Press ENTER to confirm your country code
5 selection.
Before Operation (Continued)
OTHERS
DVD or Video CD Operation
Playing a DVD and Video CD
OTHERS
Playback Setup
PBC
On
DivX(R) Registration
Select
DVD
VCD2.0
VCD1.1
Turn on the TV and select the video input source connected to the DVD/CD Receiver.
Audio system: Turn on the audio system
and select the input source connected to the
DVD/CD Receiver.
Move
PBC
Select
Press OPEN/CLOSE ( Z ) to open the disc tray.
1
VCD
Set Playback Control (PBC) to On or Off.
On:Video CDs with PBC are played according to the
Load
2 facingyour
PBC.
the side you want to play is facing down.
Off:Video CDs with PBC are played the same way as
Audio CDs.
3
DivX(R) Registration
chosen disc in the tray, with the label
up.
When a double-sided DVD is inserted, make sure
DivX
Press OPEN/CLOSE ( Z ) to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
You can show the DivX DRM (Digital Right
Management) Registration code for your unit only.
instead.
Your registration code is : XXXXXXXX
If a menu screen is displayed
Please use this code to register this player with
the DivX(R) Video On Demand service.
This will allow you to rent and purchase videos
using the DivX(R) Video On Demand format.
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
To learn more go to www.divx.com/vod
DVD-V
The Registration code is used for VOD (Video-On-
Use the b/B/v/V buttons to select the title/chapter you
Demand) service agent. You can purchase or rental an
want to view, then press ENTER to start. Press TITLE
encrypt movie file.
or
DVD MENU to return to the menu screen.
DVD-A
otes
If you rent the DivX VOD file, it has several options of
viewing limits as show below.
Use the b/B/v/V buttons to select an option you
want, then press ENTER to view the option.
VCD2.0
?
Display the number which you can watch the file.
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
?
This rental video has 7 views left. A view
ends when you stop playback, play a different
video, or turn off your player.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
Do you want to use one of your 7 views now
Yes
?
No
The rental has been expired.
This rental is expired.
You also may set PBC to Off under setup.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 16).
?
Display the authorization error.
DVDs may have a region code.
Your receiver will not play discs that have a region
code different from your receiver. The region code for
This video player is not authorized to
play this video.
this player is 5 (five).
17
Operation
DVD or Video CD Operation (Continued)
General Features
ote
Unless stated otherwise, all operations described use
Still Picture and Frame-by-frame playback
1
mode.
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE/GROUP
Press PAUSE/STEP during playback.
The DVD/CD Receiver will now go into PAUSE
You can advance the picture frame-by-frame by press-
2 ing
PAUSE/STEP repeatedly on the remote control.
Search
When a disc has more than one title/group, you can
move
to another title/group as follows:
Press DISP., then press the appropriate numbered
button (0-9) to select a title number.
1
Press m or M during playback.
The DVD/CD Receiver will now go into SEARCH mode.
Press m or M
to select the
repeatedly
2 required speed: mX2,
mX4, mX8, mX16,
mX100 (backward) or MX2, MX4, MX8,
Moving to another CHAPTER/TRACK
MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or
MX2, MX4, MX8, MX16 (forward).
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press . or > briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISP. Then, press 3 / 4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
3
Repeat
DVD-Video discs
1
Slow Motion
1
To repeat the currently playing chapter, press
REPEAT.
To repeat the title currently playing, press
REPEAT a second time.
3
To exit Repeat mode, press REPEAT a third
time.
The Repeat Off icon appears on the TV screen.
Press SLOW -/+ during pause.
The receiver will enter SLOW mode.
Video CDs
Use the SLOW -/+ to select the required speed: t
1
2 1/16,
1/8, t 1/4 or t 1/2 (backward), or T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
3
Repeat Chapter/Title/Off
The Repeat Title icon appears on the TV screen.
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
-
The Repeat Chapter icon appears on the TV screen.
2
ote
To exit SEARCH mode, press PLAY.
t
To exit slow motion mode, press PLAY.
-
Repeat Track/All/Off
To repeat the track currently playing, press
REPEAT.
The Repeat Track icon appears on the TV screen.
2
To repeat the disc currently playing, press
REPEAT a second time.
The Repeat All icon appears on the TV screen.
ote
Slow motion playback in reverse is not applicable for
3
To exit Repeat mode, press REPEAT a third
time.
The Repeat Off icon appears on the TV screen.
Video CD.
ote
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page
17.
DVD or Video CD Operation (Continued)
General Features (continued)
Marker Search
Repeat A-B
You can start playback from a memorized point. Up to
To repeat a sequence in a title:
To enter a mark, follow these steps.
Press A-B at your chosen starting point.
A- appears briefly on the TV screen.
nine points can be memorized.
disc playback, press MARKER when
During
1 playback
The marker icon will appear on the TV screen briefly.
A-B appears briefly on the TV screen, and the repeat
sequence begins.
To cancel the sequence, press A-B.
reaches the spot that you want to
memorize.
Press A-B again at your chosen end point.
2 Repeat step
1 to enter up to nine Marker points
on a disc.
To Recall a Marked Scene
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
Press DISP. during playback. The on-screen display appears on the screen.
The Time Search box shows the elapsed playing time of
the current disc.
Within 10 seconds, press 3 / 4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
Within 10 seconds, use the number buttons to
enter the required start time. Enter hours,
minutes, and seconds from left to right in the
box.
If you enter the wrong numbers, press CLEAR to remove
the numbers you entered. Then enter the correct numbers.
Within 10 seconds, press ENTER to confirm the
start time.
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
disc
1 During playback,
seconds,
2
3 Playback
4
press SEARCH.
The MARKER SEARCH menu will appear on the screen.
Within 10
press 1/2 to select a marker
number that you want to recall.
Press ENTER.
will start from the Marked scene.
To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
disc
1 During playback,
2
3
4 Repeat steps
5
press SEARCH.
The MARKER SEARCH menu will appear on the screen.
Press 1 / 2 to select the marker number that you
want to erase.
Press CLEAR.
The marker number will be erased from the list.
2 and 3 to erase additional marker
numbers.
To remove the MARKER SEARCH menu, press
SEARCH.
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1
Press ZOOM during playback or still playback to
activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to four steps.
100% size → 400% size
1600% size
2
→
→
800% →
100% size
Use the 1234 buttons to move through the
zoomed picture.
ote
The zoom function may not work for some DVDs.
Operation
DVD or Video CD Operation (Continued)
Special DVD Features
DVD-V
DVD-A
A typical DVD Audio disc contains up to seven times the
data capacity of a CD. This additional space is used for
music, either Advanced Resolution multi-channel sound
Checking the contents of DVD Video
quality that is closer to the artist's master recording or
discs: Menus
for longer recordings. Many DVD Audio discs contain
DVDs may contain menus that allow you to access
special features. To use the disc menu, press MENU.
Then, press the appropriate number button to select an
text, such as artist biographies, playlists, or
lyrics. Some DVD Audio discs contain photo galleries or
video clips.
on-screen
option. Alternatively, use the 1/2/3/4 buttons to highlight your selection, then press ENTER.
ote
To enjoy maximum sound quality and surround effect of
Title Menu
DVD-V
DVD-A
DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
Press TITLE.
1
If the current title has a menu, the menu will appear on
the screen. Otherwise, the disc menu may appear.
2
The menu can list camera angles, spoken lan-
guage and subtitle options, and chapters for the
title.
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though you're
playing a DVD Audio disc.
Moving to another GROUP
Disc Menu
DVD-V
Some DVD Audio discs divide content into different
DVD-A
groups. Your player enables you to quickly access
different groups during playback via the on-screen
Press MENU.
The disc menu is displayed.
display.
Changing the Audio Language
DVD-A
DVD-V
DivX
Press AUDIO repeatedly during playback to hear a
1.
Press DISP. during playback on in stop mode.
2.
Press 3/4 to select Group icon.
Press 1/2 or the numbered buttons (0-9) to select a
3.
group number.
different audio language or audio track.
Changing the Audio Channel
Note:
VCD2.0
VCD1.1
Sometimes the author of the disc creates hidden
Press AUDIO repeatedly during playback to hear a
content that can only be accessed by entering a pass-
different audio channel (STER., LEFT or RIGHT).
word. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
ote
If
appears, the feature is not available on the disc.
jacket cover or on a web site). This password control
isn't dictated by your DVD/CD receiver
it is a function
---
of the disc.
Subtitles
DVD-V
DivX
Press S-TITLE repeatedly during playback to see the
different subtitle languages.
otes
The subtitle file of the DivX file is displayed only smi,
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you're playing.
Viewing another PAGE
srt and sub.
Since DVD Audio discs can hold a lot of content, there
If there is no information or there is a code that can
are
various ways to see what's available on the disc.
1.
Press DISP. during playback.
DVD Audio Discs
2.
Press 3 / 4 to select Page icon.
DVD Audio is a new disc format building on the success
3.
Press 1/2 to select a page number.
not read in the DivX file, "1/1" etc are displayed.
of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A
DVD Audio disc can be identified by the DVD audio logo
on
the disc jacket or on the disc itself.
DVD Audio can provide higher quality stereo than Audio
CDs with a sampling rate of up to 192kHz (compared to
44.1kHz for CDs). DVD Audio digital sound can be
delivered with up to 24 bits of data (compared to 16 bits
for a standard CD).
20
What appears on the screen will vary from disc to
disc because the information available depends upon
the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some of
the on-screen display choices might not be available for
the disc you're playing.
Audio CD or MP3/WMA Disc
Operation
Playing an Audio CD and MP3/WMA
Repeat Track/All/Off
Disc
You can play a title/chapter/all/track on a disc.
CD
MP3
WMA
The DVD/CD Receiver can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
CD
MP3
WMA
1 Press REPEAT when playing a disc. The repeat icon
appears.
2 Press REPEAT to select a desired repeat mode.
Audio CD
?
TRACK: repeats the current track
Once you insert an audio CD a menu appears on the
?
ALL: repeats all the tracks on a disc.
TV screen. Press v / V to select a track then press
?
Off(No display): does not play repeatedly.
Operation
PLAY or ENTER and playback starts.
Search
1/12
0:00:00
Audio CD
List
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
MP3
WMA
1 Press m or Mduring playback.
Program
Track1
CD
The receiver will now go into SEARCH mode.
2 Press m or M repeatedly to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
3 To exit SEARCH mode, press PLAY.
MP3 / WMA
1.
Press v / V to select a folder, and press ENTER to
see
2.
the folder contents.
MP3 / WMA disc compatibility with this player is
Press v / V to select a track then press PLAY or
limited as follows:
ENTER.
?
Playback starts.
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32- 192kbps (WMA)
-
-
0:00:00
1/104
?
MP3
List
Program
?
1-Music1
-
The DVD/CD Receiver cannot read an MP3/WMA
2-Music2
file that has a file extension other than ".mp3" /
3-Music3
4-Music4
".wma".
5-Music5
6-Music6
?
7-Music7
?
If you record MP3 / WMA files using software that
cannot create a file system (eg.
Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
otes
If you are in a file list on the MP3/WMA menu and want
to return to the Folder list, use the v / V to highlight
and press ENTER.
creates an ISO 9660 file system.
?
Press MENU to move to the next page.
On a CD with MP3/WMA file and JPEG file, you can
MP3/WMA or JPEG word on top of the menu is high-
lighted. Then, use b / B to select MP3/WMA or JPEG
then press ENTER.
CD
MP3
?
.mp3 or .wma extension.
They should not contain special letters such as / ?
*:"<>letc.
?
The total number of files on the disc should be less
than 999.
This DVD/CD Receiver requires discs and recordings
WMA
to meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded DVDs
1 Press PAUSE/STEP during playback.
are
2 To return to playback, press PLAY or press
CD
MP3
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
PAUSE/STEP again.
Moving to another Track
File names should have a maximum of 8 letters and
must incorporate an
switch MP3/WMA and JPEG menu. Press TITLE and
Pause
CD-R physical format should be ISO 9660
WMA
Press . or > briefly during playback to go to the next
track or to return to the beginning of the current track.
these require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
Press . twice briefly to step back to the previous track.
and music from the Internet. Our company has no
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
right to grant such permission. Permission should
always be sought from the copyright owner.
during playback.
21
JPEG Disc Operation
Viewing a JPEG disc
JPEG
JPEG disc compatibility with this player is limited
This unit can play discs with JPEG files.
as follows:
Before playing JPEG recordings, read the notes on
?
JPEG
Recordings
Receiver to read the disc's contents. If you don't
Insert a disc and close the tray.
The JPEG
menu
Depending upon the size and number of JPEG
files, it could take a long time for the DVD/CD
right.
on
see an on-screen
appears on the TV screen.
some
display after several minutes,
of the files may be too large
---
reduce the
resolution of the JPEG files to less than 2760 x
2048 pixels and burn another disc.
JPEG
List
Preview
JPEG Folder 1
?
JPEG Folder 2
The total number of files and folders on the disc
JPEG Folder 3
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
?
JPEG Folder 7
JPEG Folder 8
Some discs may be incompatible due to a different
recording format or the condition of disc.
Press v / V to select a folder, and press ENTER.
2
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
remote to highlight
and press ENTER.
?
them as ".jpg" file.
File names without ".jpg" extension will not be able
the files are shown as JPEG image files in
While viewing a file, you can press STOP to move
Windows Explorer.
(JPEG menu).
There are four Slide Speed options
:
(Slow), >> (Normal), >>> (Fast) and II (off).
Use v/V/b/B to highlight the Speed. Then, use b / B to
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
>
SLIDE SHOW
JPEG
Use vVbBto highlight the
(Slide Show) then
press ENTER.
STILL PICTURE
JPEG
Press PAUSE/STEP during slide show.
The DVD/CD Receiver will now go into PAUSE
mode.
2.
If the files have ".jpe" or ".jpeg" extensions, please
rename
to highlight a file and press ENTER or PLAY.
ips
1.
?
to be read by this DVD/CD Receiver. Even though
to the previous menu
?
Ensure that all the selected files have the ".jpg"
extensions when copying into the CD layout.
If you want to view a particular file, press v / V
3
?
?
A list of files in the folder appears.
To return to the slide show, press PLAY or press
PAUSE/STEP again.
MOVING TO ANOTHER FILE
Press SKIP (.
or
JPEG
>) once while viewing a picture
to advance to the next or previous file.
TO ROTATE PICTURE
JPEG
Press b / B during showing a picture to rotate the
picture clockwise or counter-clockwise.
22
Programmed Playback
CD
MP3
WMA
The program function enables you to store your favorite tracks from any disc in the receiver memory. A program can
contain 300 tracks.
1
Insert a disc.
REPEAT PROGRAMMED TRACKS
1.
Audio CD and MP3/WMA Discs:
Audio CD or MP3/WMA menu appears as below.
2.
0:00:00
1/12
0:00:00
Audio CD
1/104
MP3
List
Program
Press REPEAT when playing a disc. The repeat
icon appears.
Press REPEAT to select a desired repeat mode.
JPEG
?
TRACK: repeats the current track
?
ALL: repeats all the tracks on programmed list.
?
Off(No display): does not play repeatedly.
Program
List
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Music Folder 6
Track7
Track1
Track8
Track10
Music Folder 7
ERASING A TRACK FROM "PROGRAM"
Music Folder 8
LIST
Audio CD Menu
MP3/WMA Menu
1.
Use vVto select the track that you wish to erase
from the Program list.
2
Select a track on the "List", then press PROGRAM
or select
"
(Add)" icon then press ENTER to
the
selected
track on the "Program" list.
place
Repeat to place additional tracks on the list.
2.
Press CLEAR. Alternatively, select
"
(Delete)"
icon then press ENTER to place the selected track
on
the Program list.
Repeat to erase additional
tracks on the list.
ote
You can add all tracks in the disc. Select
"
( Add All)" icon
then press ENTER.
ERASING THE COMPLETE PROGRAM
LIST
Select the track you want to start playing on the
3 "Program"
list. Press MENU to move to the next
page.
4
Use v / V to select
"
(Del all)",
then press ENTER.
ote
Press PLAY or ENTER to start.
Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
"Program" list have played once.
The programs are also cleared when the disc is removed.
To resume normal playback from programmed play-
5 back,
select a track of AUDIO CD (or MP3/WMA)
list and then press PLAY.
23
Operation
DivX Disc Operation
Using this DVD/CD Receiver you can play DivX disc.
Insert a disc and close the tray. The DivX menu
1 appears
on
DivX disc compatibility with this player is limited
as follows:
the TV screen.
?A vailable resolution size of the DivX file is under
0:00:00
720x576 (W x H) pixel.
1/12
DIVX
?
List
The file name of the DivX subtitle is available by
20~40characters (different by language).
Movie Folder 1
Movie Folder 2
Movie Folder 3
?
Movie Folder 4
If there is impossible code to express in the DivX
file, it may be displayed as
Movie Folder 5
Movie Folder 6
Movie Folder 8
?
?
list of files in the folder appears. If you are in a file
If you want to view a particular file, press v / V to
a file
and press ENTER or PLAY.
Press STOP to exit.
4
If the video and audio structure of recorded file
putted.
and
press ENTER.
second, this unit may not operate normally.
is not interleaved, either video or audio is out-
list and want to return to the Folder list, use the
3 highlight
mark on the dis-
If the number of the screen frame is over 30 per
1
Press v / V to select a folder, and press ENTER. A
v / V buttons on the remote to highlight
"
_
play.
Movie Folder 7
2
"
?
If the file is recorded with GMC, the unit supports some of 1-point of the record level.
*
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.
otes
?
Be sure to select "SUBTITLE ON" mode before playback a
DivX file by pressing ENTER every time.
?
When the subtile has more than two languages in the file,
?
The Pro logic II Sound mode is not available for DivX file.
?
The DivX files in your memory card will not be able to be
original subtile is only available.
play.
Playable DivX file
z ".avi ", ".mpg ", ".mpeg
"
Playable Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz (MP3),
-
within 24
?
48kHz (WMA)
Bit rate: within 32
40
24
-
-
320kbps (MP3),
192kbps (WMA)
-
Speaker Setup
Adjust the following settings for the built-in 5.1 channel
surround decoder.
1
2
3
Distance
If you connected speakers to your DVD/CD Receiver,
setting the distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
Press SET UP.
The setup menu appears.
listener at the same time.
Use v / V to select the AUDIO option then press
Press b / B to adjust the Distance of the selected
B to move to the second level.
speaker.
Use v / V to select the Speaker Setup option
then press B to move to the third level. "Select"
is highlighted.
ote
You can adjust the distance of Center speaker and Rear
Press ENTER and 5.1
4 appears.
Speaker Setup
menu
speakers (left & right) only.
Test
AUDIO
Press b / B to test the signals of each speaker.
Adjust the volume to match the volume of test signals
Speaker
Front L
Size
Small
Front Left (L) → Center → Front Right (R) →
Volume
0
dB
Distance
2
m
Test
Off
Select
5
memorized in the system.
Move
Rear Right (R) → Rear Left (L) → SubWoofer
Return
Enter
Use b / B to select the desired speaker.
6 Adjust options using
v / V / b / B
buttons.
Press ENTER to confirm your selection. The
7 unit
returns to the previous menu.
Speaker
Select a speaker that you want to adjust.
(Front speakers (Left), Front speakers (Right), Center
Speaker, SubWoofer, Rear speakers (Left), or Rear
speakers (Right))
ote
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot change
them.
Volume
Press b / B to adjust the output level of the selected
speaker. (-5dB
+5dB)
~
25
Operation
Additional Information
Last Condition Memory
Controlling the TV
This DVD/CD Receiver memorizes the user settings for
Your remote control is capable of operating your
the last disc that you have viewed. Settings remain in
DVD/CD Receiver as well as limited functions of LG TV.
memory even if you remove the disc from the player or
switch off the player. If you load a disc that has its set-
Follow the instructions below to operate for your LG TV.
tings memorized, the latest stop position is automatically recalled.
1
Before using the remote control, press the TV to
select the device to be operated.
To switch the remote control mode (to operate a
different device), be sure to press the TV first.
otes
Settings are stored in memory for use any time.
This DVD/CD Receiver does not memorize settings of
a
disc if you switch off the DVD/CD Receiver before
commencing to play it.
Screen Saver
2
The POWER, CH( E / D ), VOLUME (+/-), and INPUT
buttons on remote control are used to operate the
LG TV.
Setting Remote Control Codes for LG TV
Hold POWER and press PR/CH(+/-) (E/D) button
repeatedly until the TV on or off.
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.
ote
If the remote control does not operate your particular
System Select
You must select the appropriate system mode for your
TV, try the other code or use the remote control
originally supplied with the LG TV. (LG and Gold Star)
Due to the variety of codes used by manufacturers,
TV system. If NO DISC appears in the display window,
OUR COMPANY cannot guarantee that the remote
press and hold PAUSE/STEP on the front panel or
control will operate every model of LG TV.
remote control for more than 5 seconds to be able to
select a system (PAL, NTSC or AUTO).
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi system TV.
NTSC:
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
Operation with Radio
Presetting the radio stations
Listening to the radio
You can preset 50 stations for FM and AM (MW). Before
Preset radio stations in the DVD/CD Receiver's memory
tuning, make sure that you have turned down the vol-
first (see "Presetting radio stations" on the left).
ume.
1
Press BAND until AM (MW) or FM appears in the
Press BAND on the remote control until FM or
AM (MW) appears in the display window.
And then every time you press BAND, FM and
3
Press and hold TUNING
AM (MW) changes alternately.
or
window.
The last received station is tuned in.
2
on
the front panel for about two seconds until the
frequency indication starts to change, then
release.
Scanning stops when the DVD/CD Receiver tunes in a
station. "TUNED" and "STEREO" (for stereo program)
appear in the display window.
2
Press PR(D/E) repeatedly on the remote control
to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
the volume by rotating VOLUME on the
3 Adjustpanel
by pressing VOLUME + or
remote control repeatedly.
front
or
-
the
on
To turn off the radio
Press POWER to turn the DVD/CD Receiver off or
Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
Press PR ( D / E ) on the remote control to select
select another function mode (DVD/CD, AV 1, etc.,).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
the preset number you want.
For manual tuning, press TUN(-) b or TUN (+) B on
the remote control repeatedly.
Press PROG./MEMO. on the remote control
For automatic tuning, press and hold TUN(-) b or
TUN (+) B for about two seconds on the remote
6 again.
The station is stored.
7
1 display
control.
Repeat steps 3 to 6 to store other stations.
To select a preset radio station directly
You can use the number buttons on the remote control
To tune in a station with a weak signal
Press TUNING
or
repeatedly in step 3
to tune in the station manually.
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and "CLEAR ALL" is appeared in the display window
and then press PROG./MEMO. again, the stations are
cleared.
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station
19, press 1
then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press MONO/ST. on the front panel so that
"STEREO" disappears in the display window.
There will be no stereo effect, but the reception will
If you have accidentally entered into the "CLEAR ALL"
improve. Press the button again to restore the stereo
and you do not wish to clear the memory, do not
effect.
press any key. After a few seconds, the "CLEAR ALL"
display will go off by itself and change to mode.
To improve reception
ote
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
Reorient the supplied antennas.
Operation
Other Functions
Sleep Timer Setting
XTS (Excellent True Sound)
You can set the DVD/CD Receiver to turn off automatically at a specified time.
You can enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
1
Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears in the dis-
play window.
Each time
SLEEP the setting changes
you press
2 in the following
order.
SLEEP 180 →150 →120→90→80→70 →60→50→
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→NORMAL...
Tips:
XTS- 1:
sound relatively to the general music, it
40→30→20→10 →OFF
enforces the sense of sound at woofer
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
for you to satisfy with.
XTS- 2:
In the mode of 2 CH BYPASS, It creates the
high display effect by playing the sound
source via the rear speakers same as the
front speakers.
XTS- 3:
Dimmer
You can operate both XTS- 1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
This function will change the brightness of the display
window on the front panel during in power-on status.
woofer at the XTS- 2 mode.
Press the DIMMER repeatedly.
ote
Mute
The XTS- 2 mode is temporarily disabled when changing
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
Using the Headphone Jack
Connect a stereo headphone plug (
PHONES connector.
When playing the movie with the weak bass
3.5mm) into the
from 2.1 CH to 5.1 CH and it is enabled when changing it to
2.1 CH.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
The speakers are automatically disconnected when you
plug in a headphone (not supplied).
Each time you press XTS pro the setting changes in
the following order.
Selecting the Input Source
XTS-P ON → XTS-P OFF
You can use VCRs or other units connected to the AV1
IN or AV2 IN connectors. Refer to the owner's manual
supplied with the unit for further information on the
operation.
Press AUX repeatedly on the remote control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:
AV 1: for selecting the analog signal from AV1 AUDIO IN
(L/R) & VIDEO IN Connectors.
AV 2: for selecting the analog signal from AV2 AUDIO IN
(L/R) & VIDEO IN Connectors.
ote
You can also select the input source by pressing
FUNC. button on the front panel.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Finnish
7073
Macedonian
7775
Slovenian
8376
Afar
6565
French
7082
7771
Somali
8379
Afrikaans
6570
Galician
7176
7783
Spanish
6983
Albanian
8381
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Ameharic
6577
German
6869
Maltese
7784
Swahili
8387
Arabic
6582
Greek
6976
Maori
7773
Swedish
8386
Armenian
7289
Greenlandic
7576
Marathi
7782
8476
Assamese
6583
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tamil
8465
Bashkir
6665
Hausa
7265
Nauru
7865
Tatar
8484
Basque
Bengali; Bangla
6985
Hebrew
7387
7869
Telugu
8469
6678
Hindi
7273
7879
Thai
8472
Bhutani
6890
Hungarian
7285
7982
Tibetan
6679
Bihari
6672
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Cambodian
7577
Japanese
7465
Quechua
8185
Ukrainian
8575
Catalan
6765
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Chinese
9072
Kannada
7578
Rumanian
8279
Uzbek
8590
Corsican
6779
Kashmiri
7583
Russian
8285
Vietnamese
8673
Croatian
7282
Kazakh
7575
Samoan
8377
Volapuk
8679
Czech
6783
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Danish
6865
Korean
7579
Scots Gaelic
7168
Wolof
8779
Dutch
7876
Kurdish
7585
Serbian
8382
Xhosa
8872
English
Esperanto
6978
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
6979
Latin
7665
Shona
8378
Yoruba
8979
Estonian
6984
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Faroese
7079
Lingala
7678
Singhalese
8373
Fiji
7074
Lithuanian
7684
Slovak
8375
Code
Country
Malaysia
Code
Country
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
8471
8479
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Dutch Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech Republic
CZ
JP
PH
United States
US
Denmark
DK
Japan
Kenya
Paraguay
Philippines
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
UG
Refrnce
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Symptom
Correction
The power cord is disconnected.
?
Plug the power cord securely into the
wall outlet.
?
No disc is inserted.
?
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
?
The TV is not set to receive DVD signal
?
Select the appropriate video input mode
No power.
?
The power is on, but
the DVD/CD Receiver
does not work.
No picture.
lit.)
output.
the TV so the picture from the DVD/
on
CD Receiver appears on the TV screen.
?
The video cable is not connected
?
securely.
There is no sound or
?
The connected TV power is turned off.
?T
?
The equipment connected with the
?
only a very low-level
audio cable is not set to receive DVD
sound is heard.
The audio cables are not connected
?
securely.
?
The power of the equipment connected
urn on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
signal output.
?
Connect the audio cable into the jacks
securely.
?T
with the audio cable is turned off.
The playback picture is
Connect the video cable into the jacks
securely.
urn on
the equipment connected with
the audio cable.
?
The audio connecting cable is damaged.
?
Replace it with a new one.
?
The disc is dirty.
?
Clean the disc.
?
No disc is inserted.
?
poor.
The DVD/CD Receiver
does not start playback.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
?
An unplayable disc is inserted.
?
Insert a playable disc. (Check the disc
type, colour system and Regional code.)
?
The disc is placed upside down.
?
Place the disc with the playback side
down.
?
The disc is not placed within the guide.
?
Place the disc on the disc tray correctly
inside the guide.
?
The disc is dirty.
?Amenu
is on the TV screen.
?
?
Clean the disc.
Press the SET UP button to turn off the
menu screen.
?
The Rating level is set.
?
Cancel the Rating function or change
the rating level.
Loud hum or noise is
?
The plugs and jacks are dirty.
?W
ipe them with a cloth slightly mois-
tened with alcohol.
heard.
?
The disc is dirty.
?
?
The speakers and components are
?
connected poorly.
?
The DVD/CD Receiver is located too
close to the TV.
Clean the disc.
Connect the speakers and components
securely.
?
Move your TV away from the audio
components.
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is positioned or connected
poorly.
be tuned in.
Correction
?
Connect the antenna securely.
?
Adjust the antennas and connect an
external antenna if necessary.
?
The signal strength of the stations is too
?T
weak (when tuning in with automatic
une
in the station manually.
tuning).
?
No stations have been preset or preset
?
Preset the stations (page 27).
stations have been cleared (when
tuning by scanning preset stations).
The remote control
?
The remote control is not pointed at the
?
remote sensor of the DVD/CD Receiver.
does not work properly.
?
The remote control is too far from the
?
DVD/CD Receiver.
?
There is an obstacle in the path of the
Point the remote control at the remote
sensor
of the DVD/CD Receiver.
Use the remote control within about 23
ft (7 m).
?
Remove the obstacle.
?
Replace the batteries with new ones.
?
Press DIMMER on the remote control.
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control are
flat.
The front panel display
is too dim.
?
Nothing is displayed on the front panel
display.
Refrnce
LH-T551TB_JA8MLLA_ENG_129N
Specifications
Power supply
Genral
CD/ VD
Refer to main label
Mass
3.9 kg
External dimensions (W x H x D)
430 x 54 x 350 mm
Operating conditions
Operating humidity
Temperature: 5°C to 35°C, Operation status: Horizontal
Laser
Semiconductor laser, wavelength 650 nm
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL 625/50, NTSC 525/60
Video output
S-video output
Video
Component Video output
FM
Tuner
AM [MW]
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
Surround mode
Amplifer
Speakrs
Refer to main label
Power consumption
5% to 85%
140 Hz to 20 kHz
More than 75 dB (1
kHz, at 12W position) (20 kHz LPF/A-Filter)
0.5 % (1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
87.5
108.0 MHz
-
-
74.0 MHz, 87.5
-
108.0 MHz
60 dB (Mono)
140
522
10,000 Hz
-
1,620 kHz or 520
-
-
1,720 kHz
450 kHz
70W+70W(8Ωat1kHz,THD10%)
Front: 70W + 70W (THD 10 %)
Centre*: 70W
Inputs
Outputs
AV IN
Sound Pressure Level
or 65.0
10.7 MHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Type
Impedance
Frequency Response
kHz, NOP, 20 kHz LPF/A-Filter)
More than 70 dB
Surround*: 70W + 70W (8Ω at 1
kHz, THD 10 %)
Subwoofer*: 150W (4Ω at 30 Hz, THD 10 %)
S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V)
Satellite Speaker
Centre speaker
(LHS-55TBS)
(LHS-55TBC)
1
Way 2 Speaker
1
Way 2 Speaker
8Ω
150
-
20,000 Hz
86 dB/W (1m)
Passive Subwoofer
(LHS-55TBW)
1
Way 1 Speaker
8Ω
150
20,000 Hz
-
86 dB/W (1m)
4Ω
40
-
1,500 Hz
82 dB/W (1m)
Rated Input Power
70W
70W
150 W
Max.
140 W
140 W
300 W
280x1200x280mm
500x83x90mm
195x402x360mm
2.38kg
0.71kg
6.2kg
Input Power
Net Dimensions (W x H x D)
Net Weight
Designs and specifications are subject to change without notice.
P/N: 3834RH0129N
">