LG | LH-T6245D | Owner's Manual | LG LH-T6245D Owner's manual

LG LH-T6245D Owner's manual
LH-D6245D_JA5HLLS_ENG
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-D6245
(Main Unit: LH-D6245D,
Speakers: LHS-D6245T, LHS-D6245W)
CD-R/RW
Before
connecting up, operating
please
read this instruction
repairing
booklet carefully
or
this
and
product,
completely.
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation mark within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the instructions
(servicing)
accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
Laser
System.
read this
product, please
owner 's
manual
unit
tion
carefully and retain it for future reference. Should the
require maintenance, contact an authorized service loca(see service procedure).
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
the
on
apparatus.
OTES ON COPYRIGHTS:
It is forbidden
via cable,
law to copy, broadcast, show, broadcast
in public, or rent copyrighted material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is located
on
the back
of this unit. This number is
to others. You should
This
product
is manufactured to
radio interference
DIRECTIVE
73/23/EEC.
2
requirements
89/336/EEC,
comply
with the
retain this
of EEC
93/68/EEC and
Model No.
Serial No.
guide
as a
unique to this unit and not available
record requested information here and
permanent record of your purchase.
___________________________________
___________________________________
Table of Contents
Audio CD and MP3/WMA Disc
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
Operation
PlayingAudioCDsorMP3/WMADiscs
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
22-23
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.22
Pause.............................23
Precautions.............................5
SelectingTracks.....................23
RepeatTrack/All/Off...................23
NotesonDiscs..........................5
Search.............................23
PlayableDiscs...........................4
AboutSymbols..........................5
Front Panel Controls and Display Window
Indicators.................................6
RemoteControlOverview....................7
RearPanelConnections.....................8
RepeatA-B.........................23
3DSurround........................23
AudioChannelSelection...............23
JPEGFileOperation.......................24
ViewingJPEGFiles......................24
SelectingFiles.......................24
StillPicture.........................24
Preparation
Connections............................9-13
FlippingthePicture...................24
RotatingthePicture...................24
AM-FMAerialConnections..................9
NotesonJPEGFiles..................24
TVConnection..........................10
ProgrammedPlayback.....................25
Audio CD and MP3/WMA Disc Programmed
Playback..............................25
.25
VideoCDProgrammedPlayback.
SpeakerSetup............................26
.11
ExternalEquipmentConnection.
.12
SpeakerSystemConnections.
SpeakerPlacement......................13
BeforeOperation.......................14-18
Mini Glossary for Audio Stream & Surround
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Mode.................................14
SoundMode...........................14
GeneralExplanation......................15
On-ScreenDisplay.......................15
InitialSettings........................16-18
InitialSetup.........................16
Language..........................16
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................26
LastConditionMemory...................26
SystemSelect..........................26
RadioOperation........................27-29
Presettingtheradiostations................27
Listeningtotheradio.....................27
SleepTimerSetting......................28
Dimmer...............................28
Picture.............................16
Mute.................................28
SpeakerSetup.......................17
UsingHeadphoneJack...................28
RDSOperation.........................28
ProgrammeSearch(PTY).................29
Others.............................17
ParentalControl......................18
Operation
Reference
.19-21
DVDandVideoCDOperation
DVDandVideoCDPlayback...............19
.
.
.
.
.
.
.
.
.
.
.
.
GeneralFeatures........................19
TITLESelection......................19
CHAPTER/TRACKSelection.
.
.
.
.
.
.
.
.
.
.
.19
Search.............................19
Still Picture and
Frame-by-Frame Playback
LanguageCodeList.......................30
CountryCodeList.........................31
Troubleshooting........................32-33
Specification.............................34
.
20
About the
symbols
for instructions
SlowMotion.........................20
Indicates hazards
Repeat............................20
RepeatA-B.........................20
itself
TimeSearch........................20
Indicates
special operating
Indicates
tips
3DSurround........................20
Zoom..............................21
MarkerSearch.......................21
SpecialDVDFeatures....................21
TitleMenu..........................21
DiscMenu..........................21
CameraAngle.......................21
AudioLanguageSelection..............21
AudioChannelSelection...............21
Subtitles...........................21
or
other
likely to cause
material damage.
and hints for
harm to the unit
features of this unit.
making
the task easier.
Manufactured under license from
Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
3
INTRODUC
Before Use
Disc-related terms
Discs
Playable
Title
DVD
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
addition, this unit
can
play
a
DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R
audio
titles, MP3
or
CD-RW that contains
JPEG files.
or
Depending
--
the conditions of the
the CD-R/RW
ment
or
itself,
some
cannot be
--
on
CD-R/RW
played
on
recording equip(or DVD±R, DVD±RW) disc
(or DVD±R, DVD±RW) discs
irregularly shaped
octagonal). It may result in
or
use
otes
on
feature content
enabling
easily.
(Video
Sections of
audio
or an
enabling
CD and audio CD
only)
a picture or a musical piece
CD. Each track is assigned
on a
a
video CD
track
number,
you to locate the track you want.
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
accompanying
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
otes
--
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In
(DVD only)
CDs
Scene
(the
On
(e.g., heart-shaped
malfunctions.
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Make sure to also refer to the instructions
supplied
with
the DVDs and Video CDs. Some DVDs made for business
purposes may not be able to be
played
on
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
functions, or other
typical computer-like operations. Moreover, still pictures
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Regional
Video CDs not
code of the DVD/CD receiver and DVDs
This DVD/CD receiver is
tured for
playback of
software. The region
designed and manufacregion "2" encoded DVD
code
DVDs indicates which
those discs. This unit
on
the labels of
type of player
can
only play
can
some
2
play
DVDs labeled "2"
or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
4
are
Video CDs
of
the
unit.
subject
There
PBC
or
of video CDs
Types
to
area
restrictions and therefore not
playable.
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
or
radio,
or
turn off the
use
volatile
such
liquids,
contact with the unit for
leave marks
Cleaning
as
a
use a
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
temperature
as
a
clean
Before
quality.
cloth. Wipe
distort the
can
playing,
picture
clean the disc
the disc from the centre out-
wards.
on
a
insecticide spray,
plastic products in
long period of time. They will
or
NO
the unit
Do not
soft, dry cloth. If the surfaces
soft cloth
or
use
thinner,
are
moistened with
lightly
solution. Do not
benzene,
YES
the surface.
To clean the cabinet
Use
playing,
the exterior surfaces clean
the unit. Do not leave rubber
near
discs
Storing
Precautions
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
use
spray intended for
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD receiver is
a
high-tech, precision
device. If
the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
"
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
get
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
on
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
following symbol is
represented by the symbol.
one
to the disc
of the
DVD.
Video CDs with the PBC
(playback control)
function.
Handling
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG files
on a
disc.
5
INTRODUC
Front Panel Control and
Window Indicators
Display
STANDBY/ON
OPEN/CLOSE
VOLUME
controller
STANDBY indicator
FUNCTION/
Lights red when the receiver
is in Standby mode (off).
PLAY
DISPLAY
Window
DISC
Remote
Tray
sensor
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
TUNING
(DOWN/UP)/
SKIP/SCAN
Indicates current
Indicates current
surround mode
or
PHONES
connector
chapter
track number
Indicates current
audio stream
Repeat playback
Indicates current
player function:
Playback, Pause,
MEMORY
indicator
mode indicators
TUNED indicator
etc.
STEREO indicator
Programmed
playback active
Indicates current title number
MUTE indicator
ANGLE active
SLEEP indicator
RDS Data
type indicators
VCD DVD disc loaded
VCD Video CD loaded
SVCD
Super
MP3 MP3
6
or
Video CD loaded
WMA disc loaded
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
Remote Control Overview
POWER
OPEN/CLOSE
(p. 19)
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
the front
on
panel.
Press and hold down this button
about 3
seconds, then press
repeatedly
NUMBER
SLEEP
to select other function.
(p. 28)
SUBTITLE
PRO LOGIC II
(p. 14)
AUDIO
(p. 14)
(p. 14)
(p. 16)
SOUND
SETUP
(p. 21)
RETURN
(p. 19)
DISPLAY
(p. 15)
ENTER
TITLE
ARROW
For
on a
use
GUI
in
highlighting
menu
a
menu screen
display
screen, TITLE and
MENU screen.
Use the MENU button to
the
Use the TITLE button to
selection
MENU
included
(p. 21)
on
the title
included
DVD video discs.
SLOW SCAN
(p. 21)
display
screen
(Q
/
R)
(p. 20)
DVD
on
video discs.
VOLUME
(+/-)
PRESET(+/-) (p. 27)
SKIP/SCAN
STOP
PAUSE/STEP
(p. 20)
MUTE
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
RDS
PTY
PTY SEARCH
Remote Control
DIMMER
(p. 28)
(p. 28)
(p. 29)
(p. 29)
Remote control
sensor
and press
battery
installation
Remove the
the buttons.
Angle:
(p. 28)
(p. 25)
CLEAR (p. 21)
REPEAT (p. 20, 23)
REPEAT A-B (p. 20, 23)
21)
21)
21)
21)
Point the remote control at the remote
remote
) (p. 19)
/
PROGRAM
Operation Range
Distance: About 23 ft
(
battery
of the remote
(7 m)
from the front of the
cover on
control, and insert
R03
(size AAA) batteries
aligned correctly.
sensor
the
with
rear
two
and
About 30° in each direction in front of the remote
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel Connections
SPEAKER Connectors
FM 75Ω Antenna Connector
AUXILIARY INPUT Connectors
S-VIDEO OUT
Connector
S/VIDEO OUT
MONITOR OUT
MONITOR OUT
Connector
AM Antenna Connectors
POWER CORD
Do not touch the inner
panel. Electrostatic
damage to the unit.
8
pins of the jacks on the rear
discharge may cause permanent
Connections
AM-FM Aerial Connections
Connect the
Connect
supplied FM/AM aerial for listening to the radio.
the AM loop aerial to the AM aerial connector.
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
PREATION
(supplied)
(supplied)
S/VIDEO OUT
MONITOR OUT
otes
To
prevent noise pickup, keep the AM loop aerial away from the DVD/CD receiver and other components.
Be
sure
After
fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
to
as
horizontal
as
possible.
9
Connections
(Continued)
TV Connections
Rear of TV
S-VIDEO
SCART INPUT
VIDEO
INPUT
AUDIO INPUT
INPUT
L
R
L
VIDEO Cable
V
S
T
Back of the DVD/CD receiver
SCART-RCA
Adaptor
TV/MONITOR
(SCART type)
S/
Make
the
of the
following connections, depending
capabilities of your existing equipment.
one
on
MON
ROUT
Video connection
Connect the MONITOR OUT
receiver to the VIDEO IN
ips
Depending
OUT
cable
jack
jack
on
the DVD/CD
on
the TV
using
the video
(V).
your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use one of the connections
S-Video connection
described below.
Connect the S-VIDEO OUT
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
er
on
to the S-VIDEO IN
cable
jack
jack
on
on
the DVD/CD receiv-
the TV
using
the S-Video
(S).
best connections.
Caution
--
Make
sure
the DVD/CD receiver is connected
to the TV. Select the correct AV
--
directly
input
your TV.
Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
on
ip
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
otes
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
When you connect the DVD/CD receiver to your TV,
be sure to turn off the power and unplug both units
from the wall outlet before
10
making
any connections.
Connections
External
(Continued)
Equipment Connections
Rear of VCR
(or
LD
AUDIO OUTPUT
L
player, etc)
PREATION
VIDEO
OUTPUT
R
S/VIDEO OUT
MONITOR OUT
Connection
Connect the AUX IN
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
ip
Press AUX
on
the remote control to select
input
to these
jacks.
AUX appears
on
the
Display
Window.
11
Connections
(Continued)
Speaker System Connections
Connect the
speakers using
To obtain the best
possible
Front
speaker
(Right)
the
supplied speaker
surround
Center
cords.
sound, adjust the speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
S/VIDEO OUT
MONITOR OUT
Rear
speaker
(Right surround)
Rear
speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not remove the front cover of supplied speaker.
12
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
Speaker
In the
Placement
of normal
case
(Continued)
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2
rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
a
Front
speakers
According to your listening position
speakers to 45 degree.
set up the
for
speakers
equal
distance. And
by hearing position
set up the interval between
Centre
The
?
play
speaker
centre speakers
and front
speakers
are
ideally
the
same
height.
But
normally place
it above
or
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
-
90
size, if the audience is
cm
than the listener's
near
to the
rear
wall set the
rear
speakers opposite
each
other, and
set the
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Speaker
(Left)
Speaker
Front
Speaker
(Right)
Rear
Rear
Speaker
(Left)
Speaker
(Right)
Speaker Positioning Example
13
PREATION
Before
Mini
Operation
Glossary
for Audio Stream &
right speakers and subwoofer. Standard two channel (stereo) sources completely bypass
the sound field processing. This allows you to play any source
using only the front left and right speakers and subwoofer.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and
compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
identical to the
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital pro"
gram
If you play DVDs with
better sound quality, greater
"
source.
enjoy even
improved dynamic
spatial
You
"
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
A) By pressing
SOUND button
Each time you press SOUND button, the sound mode is
changed in the following order;
PRO LOGIC
PLII MATRIX
NO
→
PLII MOVIE
→
ROCK
→
CLASSIC
→
→
SOFT
→
POP
→
PLII MUSIC
→
LIVE
→
→
DANCE
3D SURROUND
→
→
TECH-
BYPASS
...
accuracy, and
ips
ROCK:
playing
"
which carries the
mark, you
can
Sound Mode
range.
Use this mode when
(2CH STEREO)
the sound from the front left and
Outputs
Surround mode
means
BYPASS
movie
or
Dolby Digital
mark. This mode
provides
Reproduces the acoustics of rock music.
POP: Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
2 channel
the effect
of
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynam-
music.
CLASSIC:
the acoustics of orchestral
Reproduces
music.
SOFT: Ideal for soft acoustic sounds.
ic than before.
B) By pressing
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
tonal colorations.
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for
provides
a
Each time you press
PL II button, the sound mode
is changed in the following order;
PRO LOGIC
→
PLII MATRIX
(This
→
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
function available 2-channel mode
only)
When DVD is inserted.
MOVIE mode:
and
PL II button
with any stereo music recordings,
wide and deep sound space. The Music mode
use
You
change the sound mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button on the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
can
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
includes controls that allow the sound to be tailored to individual
listening
→→→
tastes.
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except
that the
directional enhancement
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
audio to
mono.
3D SURROUND
This unit
?
The DVD/CD Receiver memorizes the last mode
settings
?
for each source
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
-
-
-
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
can
audio from
a
encoded with
14
For your reference
home theatre. This feature works with DVD discs
Dolby
Pro
Logic
and
Dolby Digital
audio tracks.
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
Sound Mode is not
applicable
when
headphone
is used.
Before
General
This manual
Operation (Continued)
Explanation
3
operating the
DVD/CD receiver. Some DVDs require specific operation or allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
gives
General
screen.
playback
1
2
is not available
on
status
can
be
be
on
the TV
menu.
an
The selected item will be
an
item.
be also be used for
number).
For
some
setting
functions,
setting.
Title
CHAPT
Repeat Chapter
TRACK
Repeat
Track
ALL
Repeat
All Tracks
Repeat
A-B
Repeat
Off
AB
Resume
during playback.
Press 3/4 to select
Repeat
TITLE
OFF
display operation
Press DISPLAY
title
of
Playback Status Displays
the disc.
displayed
changed on the
can
(e.g.,
can
setting
press ENTER to execute the
Display
Some items
On-screen
or
numbers
the
change
The number buttons
basic instructions for
the DVD/CD receiver
On-Screen
Press 1/2 to
Action
play
(non-PBC
Video CDs
(non-PBC
from this
prohibited
or
only)
Video CDs
only)
point
not available
item.
otes
highlighted.
Some discs may not
provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
and Digital Audio
Output mode
Subtitle
language
Angle
Sound
VCD2.0
D
5.1 CH
ABC
Shows the current
chapter number and total number
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
of
1/2,or
Numbers, ENTER, SKIP
Numbers, ENTER
1/2,or
AUDIO
OFF
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound
changes the setting.
1/2,or
mode, and
1/2,or
SUBTILE
ANGLE
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
1/4
Time
0:20:09
Audio Channel
STER.
Sound
1/2,or
Numbers, ENTER
Shows the current subtitles
changes the setting.
BYPASS
language, and
Selection Method
BYPASS
Shows the
Selection Method
1
/2,or
Numbers, ENTER
elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound
changes the setting.
mode, and
--
1
/2,or
AUDIO
1
/2,or
SOUND
15
PREATION
Before
Initial
You
can
Operation (Continued)
Language
Setup
set your
Personal Preferences
own
on
the
DVD/CD receiver.
Disc
Language
Select
DVD
for the disc's
language
a
Menu, Audio, and
Subtitle.
Initial
Settings
General
Operation
1
Press SETUP.
The
setup
menu
appears.
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 30. If you enter the wrong language
Original
:
The
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
Spanish
Code
Italian
Aspect
Menu
Disc Subtitle
English
Disc Menu
French
Rating
German
TV
Polish
Spanish
Code
Italian
Aspect
Menu
Hungarian
5.1
Original
Country
Chinese
Language
Disc Audio
Chinese
Language
Polish
Other------------
Speaker Setup
Hungarian
Others
5.1
Other------------
Speaker Setup
Others
2
Press 3/4 to select the desired item.
The
screen
selected
will show the current
item,
as
well
as
setting for the
alternate setting(s).
Menu
Select
selected, press 2, then
3/4 to select the desired
setting.
3
While the desired item is
4
you
Language
a
see
5 setup
menu.
Disc Audio
English
Disc Subtitle
German
Disc Menu
Polish
Rating
Hungarian
Country
TV
or
setup
This is the
menu
when you press SETUP.
Press ENTER to confirm your selection.
Some items require additional steps.
Press SETUP, RETURN,
for the
language
Swedish
Aspect
Menu
PLAY to exit the
Czech
Code
Language
menu.
5.1
Speaker Setup
Others
Picture
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Displays
a
standard 4:3 TV is
theatrical
above and below the
images
picture.
4:3 Panscan: Select when
a
with
masking
con-
bars
conventional TV set is
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
cut off).
back in that
16:9 Wide: Select when
a
4:3
Letterbox
Disc Subtitle
4:3
Panscan
Disc Menu
16:9 Wide
Country
TV
Aspect
Menu
5.1
Code
Language
Speaker Setup
Others
sides of the
16:9 wide TV is connected.
Disc Audio
Rating
16
style (Both
Before
Operation (Continued)
Speaker setup
5.1
Auto
Speaker settings
You
Play
DVD
set up the DVD/CD receiver so a DVD disc
automatically starts playing whenever the DVD is insert-
DVD
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 26.)
can
ed.
If Auto
Play
will search
mode is set to
a
title that
back the title
play
On: Auto
Off: Auto
Play
Play
On, this DVD/CD receiver
playback time
automatically.
is
longest
and then
function is activated.
function is not activated.
Disc Audio
Disc Subtitle
R
Disc Menu
ote
Front L
Rating
Country
TV
Code
Volume
Play
function may not work for
some
DVDs.
Small
Distance
Language
The Auto
0dB
Size
Aspect
Menu
R
0.3
m
Test
Return
5.1
Speaker Setup
Others
Others
The
DRC, Vocal, PBC and Auto Play settings
can
be
changed.
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
Disc Menu
PBC
On
Rating
Auto
Country
TV
Off
Code
Aspect
Menu
5.1
Play
Language
Speaker Setup
Others
Dynamic Range Control (DRC)
With the DVD
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
format, you
can
hear
a
DRC to On for this effect.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
17
PREATION
Before
Operation (Continued)
Parental Control
Country
Rating
Enter the code of
Movies
DVD
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
applies
to the
the disc. These
scenes on
disc
complete
or
scenes are
Code
Code
(See "Country
are
TV
Aspect
Menu
Language
Speaker Setup
Others
7
Disc Menu
6
5
Rating
1
4
Code
3
Aspect
Unlock
Speaker Setup
Select
Others
using
Country
1
2
While
3
When you have not entered a password.
Enter a 4-digit password using the number buttons
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
2
step
3
4
5
6 selection,
3 of
"Rating"
"Rating"
is selected, press 2.
second
personal 4-digit security password. then
press ENTER. Enter the 4-digit password again and
press ENTER to verify.
When you have already registered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passto create
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
4
Ratings
1 to 8: Some discs contain
scenes
played. Higher
unless
an
rated
alternative
scenes
scene
is available
The alternative must have the
lower
If
will not be
same
on
rating
This function may not work for
18
some
DVDs.
3/4 buttons.
Confirmation of the
the code is
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
below.).
Changing
the
1
Follow
2
Enter the old
3
Select
Steps
4-digit
1-2
as
code
shown above to the left
(Rating).
code, then press ENTER.
Change using
3/4 buttons then press
ENTER.
4
Enter the
5
Enter
exactly the same
fy by pressing ENTER.
6
Press SETUP to exit the
new
then press ENTER.
code a second time and veri-
4-digit code,
menu.
If you
If you
forget your 4-digit
code
or a
1
Press SETUP to
2
Use the Number buttons to enter the
no
ote
button and select the
the disc.
played
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
5
the 3/4 buttons.
your password, to clear the current password, follow the procedure below.
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
using
not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
left.
ote
a
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
cursor
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
a
word, then press ENTER.
Select
using 2
character using
Shift the
on
Code is selected, press 2.
Select the first character
Select
the 3/4 buttons
menu.
Follow
Change
Code
Country
the setup
While
2
Language
1
5.1
HU
Code
Country
8
Disc Subtitle
Menu
Code Set
Rating
5.1
TV
to the list
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Country
were
List", page 31.).
Disc Subtitle
The Parental Control feature allows
Disc Audio
disc, referring
Disc Audio
rated
whose standards
country/area
a
used to rate the DVD video
to
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
country-dependent.
DVD
forget
display
the
setup
menu.
6-digit
number
"210499".
The
3
4-digit password
Enter
a new
(Rating).
code
is cleared.
as
shown above to the left
DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
Operation
General Features
Playback
DVD
VCD2.0
the TV and select the video
VCD1.1
input
ote
source con-
the
1
2
3
system: Turn
input
source
on
the audio
system and select
TITLE Selection
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
automatically.
If
playback
press PLAY.
In some cases, the disc
When
playback
is
DVD
or
title, you
one
to
can move
follows:
(0-9)
to select
Press 1 2 to select
When
displayed
may be displayed first after
Video CD which offers a menu.
than
title number.
a
a
title, then press ENTER.
CHAPTER/TRACK Selection
appear
menu screen
as
more
DISPLAY, then press the appropriate number
button
DVD
a menu screen
disc has
Press
instead.
The
a
another title
does not start,
might
menu
DVD
1/3
Load your chosen disc in the tray, with the
playback side facing down.
If
use
connected to the DVD/CD receiver.
Press OPEN/CLOSE to open the disc tray.
starts
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
nected to the DVD/CD receiver.
Audio
Unless stated
loading
a
VCD1.1
a
disc has
title
on a
more
chapter/track
1/3
1 /12
disc has
than
one
than
more
track, you
one
chapter
can move
or a
to another
follows:
as
Press SKIP/SCAN .or >
DVD
Use the 1 234 buttons to select the
want to
view, then press ENTER
Press TITLE
or
to
title/chapter you
start playback.
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
2
menu
the numbered buttons
to select the
setup. See page
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
Control",
(see
page 18).
region code.
play
(0-9)
or
two-digit numbers, press
(0-9)in rapid succession.
DVD
VCD2.0
the numbered buttons
VCD1.1
1 Press and hold SKIP/SCAN .
two seconds
or
> for about
during playback.
The receiver will
now
go into SEARCH mode.
or
>
repeatedly
to select the
discs that have
code different from your receiver. The
this receiver is 2 (two).
press 1
then press ENTER.
2 Press and hold SKIP/SCAN .
on
DVDs may have a
Your receiver will not
chapter/track,
For
Search
Rating settings (not authorized),
--
using
ote
menu screen.
otes
"Parental
number
operating procedures for
depending on the disc.
You also may set PBC to Off under
17.
--
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
and the exact
may differ
Follow the instructions on the each
using
the
menu screen.
briefly during playback
to return to the beginning of the current chapter/track
or to select the next chapter/track.
Press SKIP/SCAN . twice briefly to step back to
the previous chapter/track.
To go directly to any chapter during DVD playback,
region
region code
a
for
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To return to normal
play,
press PLAY.
19
OPERATION
DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
(continued)
A*
VCD1.1
To
during playback.
The DVD/CD receiver will
now
go into PAUSE mode.
advance the
repeat
play,
1 Press SLOW SCAN
-
VCD2.0
m
or
+
"
*
A
"
briefly
appears
on
briefly
begins ("
Time Search
the TV
starting point.
screen.
at your chosen end point.
the TV screen, and the repeat
again
on
"
appears the
display window).
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
during playback.
The DVD/CD receiver will enter SLOW mode.
2UsetheSLOWSCAN-morM+toselectthe
1 Press DISPLAY
required speed: t 1/16, t 1/8, t 1/4 or t 1/2
(backward), or T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
To return to normal play, press PLAY.
display
appears
The
during playback.
the
on
on-screen
elapsed playing
time of the
current disc.
2 Within 10
ote
seconds, press 3/4
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Slow motion
playback
in
is not
reverse
applicable
for
3 Within 10
Video CD.
the
seconds,
required
use
Repeat
CHAPT
DVD
VCD2.0
TITLE
TRACK
DVD Video Discs
the number buttons to enter
start time. Enter
seconds from left to
right
hours, minutes, and
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
OFF
4 Within 10
seconds, press ENTER
press PLAY to
or
confirm the start time.
Repeat Chapter/Title/Off
-
Playback
repeat the currently playing chapter, press
an
invalid
starts from the selected time
time, playback
the disc. If you enter
will continue from the current point.
on
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
3D Surround
screen.
repeat the title currently playing, press REPEAT
VCD2.0
DVD
VCD1.1
a
BYPASS
3D SUR
second time.
The
Repeat
3 To exit
The
Title icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
This unit
third time.
Video CDs
repeat
The
2 To
-
Repeat
the track
Repeat
press REPEAT.
the TV
a
3 To exit
The
All icon appears
Repeat mode,
Repeat
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
ote
On
a
setup
20
Video CD with
menu
to
use
PBC, you
the
Repeat
must set PBC to Off
effect, which
playback
from two
speakers, instead of the
speakers normally required to listen to
a
home theater
five
or
system.
1 Press SOUND MODE to select "3D SUR"
2 To turn off the 3D Surround
MODE
second time.
Repeat
3D Surround
during
playback.
screen.
repeat the disc currently playing, press REPEAT
The
a
multi-channel audio from
currently playing,
on
produce
conventional stereo
screen.
Track/All/Off
Track icon appears
can
simulates multi-channel audio
more
1 To
at
playing
screen.
The Time Search box shows the
Search icon in the
1 To
title:
a
3 To cancel the sequence, press REPEAT A-B.
VCD1.1
M
VCD1.1
OFF
"A B" appears
press PLAY.
DVD
VCD2.0
sequence in
a
sequence
Slow Motion
3
AB
2 Press REPEAT A-B
control.
3 To return to normal
DVD
1 Press REPEAT A-B at your chosen
picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote
can
A-B
Repeat
Frame-by-frame playback
1 Press PAUSE/STEP
2 You
Operation
on
function. See page 17.
the
again
effect, press SOUND
to select "BYPASS".
DVD and Video CD
General Features
Zoom
VCD2.0
DVD
Operation
during playback
or
still
the
repeatedly,
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
level
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press ENTER.
playback
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
ote
The Zoom function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
menu
menu
will appear
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
DVD
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
mark, follow these steps.
a
disc
playback, press MARKER when
reaches the spot that you want to
During
playback
Camera
The Marker icon will appear
on
the TV
briefly.
screen
1 to enter up to nine Marker
Repeat step
points
on a
disc.
To Recall
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
a
Angle
If the disc contains
memorize.
2
The disc
to
angle
appears
the TV
on
a
screen.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
2 Within 10
press SEARCH.
menu
will appear
seconds, press 1/2
buttons to select
a
or use
on
the
Audio
screen.
the number
Marker number that you want to
recall.
4 To
will start from the Marked
remove
Press AUDIO
ferent audio
scene.
1
a
During
the MARKER SEARCH menu, press
ferent audio
playback,
The MARKER SEARCH
2
will appear
on
the
screen.
different subtitle
erase.
ABC
dif-
a
dif-
1 ENG
repeatedly during playback
languages.
to
see
the
ote
Press CLEAR.
If
The Marker number will be erased from the list.
4
repeatedly during playback to hear
channel (STER., LEFT or RIGHT).
DVD
a
VCD1.1
Press SUBTITLE
press SEARCH.
menu
to hear
Press 1/2 to select the Marker number that you want
to
3
Subtitles
Marked Scene
disc
VCD2.0
5.1 CH
Press AUDIO
SEARCH.
To clear
repeatedly during playback
language or audio track.
Audio Channel Selection
3 Press ENTER.
Playback
Language
Selection
D
DVD
Repeat steps
2 and 3 to
erase
appears, the feature is not available
on
the disc.
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
21
OPERATION
Audio and MP3/WMA Disc
Operation
Notes
Playing Audio CD and MP3/WMA Disc
MP3
CD
MP3/WMA
play
can
An MP3 file is audio data
MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes
MP3/WMA Recordings on right.
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
on
MPEG1 audio
files that have
on
The
player
About
the TV
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
can
not read
extension other than
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen
a
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
MP3 WMA
1.
Media
2.
3.
Folder2
Folder3
Folder4
Folder5
Folder6
the MP3 format.
compatibility
Clear All
5.
OFF
as
A
Creator", which
single
track, it
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
creates
session disc
to
playback
4
Playback starts.
During playback,
a
track then press PLAY
the current track's
elapsed playing
menu.
to the
previous
page.
Program
MP3 WMA
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK05
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
STER.
Audio CD
BYPASS
menu
list,
are
use
in
Clear All
TRACK 8.mp3
00:00
1
MP3/WMA
5
22
and
highlight
previous menu screen.
stop playback
or
less
".wma" extension
"********.WMA".
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
at any other
requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
or
are
WMA
conditions
files). That require certain pre-existing
(see above) to insure compatible playback.
OFF
menu
file list and want to return to the Folder
the 3/4 to
return to the
To
a
or
or
8 letters
7.
MP3
ip
If you
incorporate ".mp3"
using
many different types
of recordable disc formats (including CD-R containing
TRACK 4.mp3
0: 56: 18
should be named
set to these standards. There
TRACK 3.mp3
TRACK08
names
This DVD/CD receiver
TRACK01
TRACK04
MP3/WMA file in the 1st
to the next page.
move
Program
CD
File
MP3/WMA files in the
playback
e.g. "********.MP3"
move
Press MENU to
6.
system.
or use a new one.
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
or
requires
no
ISO9660 file
an
MP3/WMA files. If you wish
MP3/WMA files, format all the data in
cannot
the disc
Press 3/4 to select
ENTER.
follows:
-
first track. If there is
3
with this DVD/CD
Sampling Frequency / only at 44.1kHz (MP3),
32 44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD
Folder7
00:00
offers double the audio
-
Folder1
Folder8
Audio)
compression
-
4.
Program
file
a
".mp3".
Microsoft audio
receiver is limited
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
MP3 file that has
an
WMA(Window Media Audio)
An WMA file is
MP3 WMA
2
Recordings
About MP3
WMA
The DVD/CD receiver
1
on
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
right
Audio and MP3/WMA Disc
Pause
MP3
CD
1 Press PAUSE/STEP
Operation (Continued)
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
Selecting
MP3
CD
or
>
playback to go to the next track
beginning of the current track.
Press SKIP/SCAN . twice
the
In
previous
case
briefly during
or
step back
to
CD,
the track number
to go
using
directly
to any
Repeat
icon and "A
track,
the numbered buttons
Repeat
to
enter
(0-9)
during playback.
*
"
appears
Repeat
1 To
Track/All/Off
CD
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
menu
screen.
2 To
on a
disc, press REPEAT
at your chosen end point.
icon and "A B" appears on the menu screen,
begins
to
play repeatedly.
The
Repeat
icon and "OFF" appears
3D Surround
This unit
can
on
the
play,
press
menu screen.
CD
produce
a
3D Surround
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
or
system.
1 Press SOUND MODE to select "3D SUR"
during play-
a sec-
ond time.
Repeat
3 To cancel
The
menu screen.
back.
repeat all tracks
The
the
again
simulates multi-channel audio
MP3
on
3 To exit the sequence and return to normal
REPEAT A-B again.
track.
of audio
sequence.
disc playback, press REPEAT A-B at your cho-
and the sequence
to return to the
briefly
a
2 Press REPEAT A-B
WMA
The
Press SKIP/SCAN .
CD
During
sen starting point.
The
Tracks
A-B
icon and "ALL" appears
Repeat mode,
Repeat
on
the
menu screen.
press REPEAT
icon and "OFF" appears
on
the
a
third time.
menu screen.
2 To turn off the 3D Surround
MODE
CD
MP3
two seconds
during playback.
The
now
will
CD
Press AUDIO
repeatedly during playback to hear a
audio channel (STER., LEFT, or RIGHT).
WMA
1 Press and hold SKIP/SCAN .
player
to select "BYPASS.".
Audio Channel Selection
different
Search
again
effect, press SOUND
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or
>
repeatedly
to select the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
mode, press PLAY.
23
OPERATION
JPEG File
Viewing
Operation
JPEG Files
Press SKIP/SCAN .
This DVD/CD receiver
play discs with JPEG files
and Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
can
disc and close the tray.
The MP3/WMA-JPEG choice menu appears
TV screen.
1
another File
Selecting
JPEG
on
the
>
once
to advance to the next file
picture
or
during viewing a
to the previous file.
Still Picture
1 Press PAUSE/STEP
a
or
during
The DVD/CD receiver will
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
now
MP3 WMA
Flipping
JPEG
2
menu
appears
on
the TV
picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
to
flip
the
screen.
Rotating picture
JPEG
Press 1/2
Folder1
Folder2
clockwise
picture
Folder3
during showing
or
a
picture
to rotate the
counter clockwise.
Folder4
Folder5
Folder6
Folder7
Notes
Folder8
Slide
Speed
JPEG Files
on
Off
upon the size and number of the JPEG
files, it could take a long time for the DVD/CD
receiver to read the disc's contents. If you don't see
Depending
3
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
list,
are
"
a
file list and want to return to the Folder
on
the remote to
highlight
If you want to view a particular file, press 3/4 to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
press RETURN to
During viewing file,
the previous menu (JPEG menu).
Press TITLE to
move
to
JPEG
move
Folder1
reduce the resolution of the
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
ip
There
are
three
Normal, Slow, and
Slide
Speed options: Fast,
Off. Press 1/2 to highlight the Slide
3/4 to select the option you want to
viewing
then press
use, and press ENTER.
Speed
To
stop viewing
The JPEG
menu
at any other
appears.
pixels
Total number of files and folders
on
and burn anoth-
the disc should
When you are using software such as
Creator" to burn the jpeg files into the
that all the selected files have the
when
copying
rename
File
them
names
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
time, press STOP.
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
be read
by
files
shown
are
explorer.
Picture1.jpg
5/32
of
If the files have
to the next page.
Press MENU to move to the previous page.
24
---
some
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
a
5
are
minutes,
be less than 650.
and press ENTER to return to the
previous
4
in
the 34 buttons
use
"
the files
after several
JPEG files to less than 2 mega
er disc.
ip
If you
display
too big
an on-screen
".jpg"
extension will not be able to
this DVD/CD receiver. Even
as
JPEG
image
though
the
files in windows
Programmed Playback
CD
VCD2.0
Audio CD and MP3/WMA Disc
function enables you to store your favorite
tracks from any disc in the player memory.
during playback or in
the Program Edit mode.
Press PROGRAM
1
mode to enter
The
the stop
E
mark will appear to the right of the word
the right side of the menu screen.
on
On
a
setup
Video CD with
menu
Program
contain 30 tracks.
can
Programmed Playback
ote
Program
Program
WMA
Video CD
Programmed Playback
The
MP3
VCD1.1
Program
to
must set PBC to Off
on
the
function. See page 17.
Program
OPERATION
contain 30 tracks.
can
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
Press PROGRAM to exit the
the
the
use
ote
E
PBC, you
Program
Edit
TRACK 2
mode;
TRACK 3
TRACK 4
mark will
disappear.
TRACK 5
TRACK 6
TRACK 7
track, then press ENTER
2
Select
selected track
on
3
Repeat step 2
Program list.
to
a
the
place
place
the
list.
additional tracks
on
the
ote
Press RETURN
E
Program
CD
Program
to
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1
TRACK 2
TRACK 3
TRACK 10
TRACK 2
TRACK 4
TRACK 4
TRACK 3
TRACK 3
PROGRAM to exit the
or
3
Follow
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
TRACK 7
TRACK 7
Clear All
0: 56: 18
STER.
BYPASS
4
Clear All
TRACK 8
00:00
3
OFF
To
playback from
programmed playback, press PROGRAM.
resume
normal
"PROG." indicator
Audio CD
MP3/WMA
menu
disappears
Press 2.
programmed
track you selected last is
highlighted
on
the program list.
5 playing.
The
Tracks
icon and "TRACK" appears
Repeat
To
repeat all tracks
on
the
menu
Playback stops after
have played once.
all of the tracks
on
the
Program
list
Erasing
a
Track from
playback from programmed playback, select a track of CD (or
MP3/WMA) list and then press ENTER.
on
the
menu screen.
the
on
menu screen.
press REPEAT
icon and "OFF" appears
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
normal
disappears
Repeat mode,
Repeat
list, press
on
icon and "ALL" appears
Repeat
The
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
the program
second time.
a
To cancel
6 Playback begins
"PROG." indicator
window.
repeat the track currently playing, press REPEAT.
The
move
Press PLAY to start.
7
To
REPEAT
to the next page.
Press MENU to move to the previous page.
resume
display
screen.
Press 3/4 to select the track you want to start
Press TITLE to
in the
menu
Repeat Programmed
To
left.
on
TRACK 5
TRACK 6
The
menu.
TRACK 3
TRACK 4
TRACK 6
TRACK 8
4
Program
E
TRACK 8
TRACK 1
TRACK 5
Clear All
TRACK 8
Program
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
Program
complete Program
The programs
are
All", then press ENTER.
for the disc will be erased.
also cleared when the disc is removed.
25
Additional Information
Speaker Setup
Adjust
the
following settings
for the built-in 5.1 channel
Last Condition
surround decoder.
DVD
CD
Memory
VCD1.1
Disc Audio
This DVD/CD receiver memorizes the
Disc Subtitle
R
Disc Menu
Country
Code
Volume
Menu
0dB
Size
Aspect
switch off the
Small
Distance
Language
0.3
settings
for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
Front L
Rating
TV
R
user
tings memorized,
ly recalled.
m
Test
If you load
the latest stop
player.
a
disc that has its set-
position
is automatical-
Return
5.1
Speaker Setup
otes
Others
--
--
1
Select "5.1
Speaker Setup" using
buttons
the setup
2
While "5.1
on
the 3/4
menu.
System
Press 2 buttons to select the desired
Select
speaker.
341 2 buttons.
selection
speaker
adjust. ((Front speakers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), Subwoofer))
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC, or
AUTO).
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
AUTO:
Select when DVD/CD receiver is connected
Size
Since the
speaker settings
settings.
the
are
fixed, you
cannot
change
Distance
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the
same
time.
ote
You
can
not set the distance of subwoofer
speaker.
Test
Press ENTER to test the
Adjust
signals
of each
the volume to match the volume
memorized in the
Front Left
Rear
(L)
Right (R)
speaker.
of test signals
system.
→
Centre
→
→
Front
Rear Left
(L)
Right (R)
→
→
Subwoofer
Return
Press ENTER to return to the
26
system TV.
Select when DVD/CD receiver is connected
Select when DVD/CD receiver is connected
with PAL-TV.
~
previous
menu.
not be
with NTSC-TV.
PAL:
level of the selected
not coincide with the
displayed.
Dolby
Volume
system does
system of your TV, normal colour picture may
NTSC:
ote
adjust the output
speaker. (-6dB +6dB)
com-
You must select the
with Multi
Press 1 / 2 to
disc if
Select
When the selected
that you want to
a
a
is selected, press 2
Speaker Setup"
3
Adjust options by using
4
time.
you switch off the DVD/CD receiver before
mencing to play it.
button.
Speaker
Settings are stored in memory for use any
This player does not memorize settings of
Radio
Operation
Radio stations
Presetting
You
can
ing,
make
50 stations for FM and AM. Before tun-
preset
sure
that you have turned down the volume.
Press BAND
1
on
the remote control until FM
AM appears in the
2
3
display
or
window.
or
panel for about two seconds
frequency indication starts to change,
then
when the DVD/CD Receiver tunes in
station. "TUNED" and "STEREO"
appear in the
stereo
(for
3
a
program)
window.
display
Press BAND until AM
play
or
FM appears in the dis-
window.
Press PRESET +/-
repeatedly
to select the pre-
set station you want.
Each time you press the button, the DVD receiver tunes in
one preset station at a time.
until the
release.
Scanning stops
1
2
on
the front
Preset radio stations in the DVD/CD receiver's memory
first (see "Presetting radio stations" on the left).
The last received station is tuned in.
And then every time you press BAND, FM and
AM changes alternately.
Press and hold TUNING
to the Radio
Listening
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
To turn off the radio
Press POWER to turn the DVD/CD receiver off
another function mode
ote
"TUNED"
appears when the
only
signal
on
the front
Use manual
panel.
For manual
preset number will flash in the display window.
the front
on
Press TUNING
5 panel
or
to select the
on
the front
preset number you
or
7
Press MEMORY
on
the front
panel again.
to 6 to store other stations.
To select
You
station with
a
Press TUNING
a
weak
to tune in the station
signal
repeatedly
or
in
step
3
manually.
To clear all the stored stations
Press and hold MEMORY for about two seconds and
"CLEAR ALL" is
then press
appeared in the display window and
MEMORY again, the stations are cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL"
display
will go off
by
itself and
step
2.
tuning,
or
press and hold TUNING
for about two seconds
on
the front
change
preset radio station directly
a
can use
to select
To tune in
in
panel.
The station is stored.
Repeat steps 3
tuning
tuning, press TUNING
panel repeatedly.
For automatic
want.
automatic
or
6
AUX).
To listen to non-preset radio stations
Press MEMORY
A
or
select
is FM and
STEREO.
4
(CD/DVD
or
the number buttons
on
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
a
(within
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
"STEREO" disappears in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
on
the front
effect.
To
improve reception
Reorient the supplied antennas.
to normal mode.
ote
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
the
preset number, follow the steps
a
5-6
as
above.
27
OPERATION
Radio
Operation (Continued)
RDS
Sleep
Timer
You
set the DVD/CD receiver to turn off automati-
can
cally
1
at
a
specified
time.
The SLEEP indicator and
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP 90→80→70→60→50→40→30→20→10→
OFF
check the time
remaining
before the
in many countries, RDS is a
station call signs or network
transmitting
description of
Press SLEEP. The
remaining
time appears in the
window.
Dimmer
RDS
Tuning
a
FM station is tuned in and it contains RDS
data,
and the
well
automatically display the station's call sign
RDS indicator will light in the Display Window
indicators for the RDS services programme
programme type recognition (PTY), Radiotext (RT)
(PS),
as
and Clock Time
the
of the
change
brightness
display
window on the front panel during in power-on status.
Press the DIMMER repeatedly.
(CT)
if transmitted
Press MUTE to mute your unit.
You can mute your unit in order, for
ety of information in addition
telephone,
to
"MUTE" indicator flashes in the
answer
to the initial call
broadcast network
or
call letters.
Jack
headphone plug ( 3.5mm)
Pressing RDS on the
cycle through the various
(PS↔FREQUENCY↔PTY ↔RT↔CT)
(Programme
name)- The name
Display Window.
Service
channel is shown in the
stereo
that
types in the sequence:
PS
a
sign
display
window.
Using Headphone
wide vari-
a
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
data
example,
the station.
system is capable of transmitting
remote control enables you to
Mute
by
Display Options
The RDS
This function will
of the
PTY
into the
PHONES connector.
The
a
the correct time.
RDS
Connect
system for
information,
station programme type text message
about the station or specifics of musical selection and
as
DVD/CD receiver turns off.
the
use
the unit will
can
display
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
When
ote
You
Operation
This unit is
which
Press SLEEP to set the desired
play
2
Setting
speakers are automatically disconnected
plug in a headphone (not supplied).
when you
the
(Programme type recognition)- The name of
programme type is shown in the Display Window.
RT
(Radiotext)-
A "text" message contains special
information from the broadcast station. Note that this
message may scroll
across
the
display
to
permit
message.
CT
(Time
controlled
the
by
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
ote
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
28
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
the
NONE, RT NONE,
Radio
Operation (Continued)
Programme Search (PTY)
A
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
of the PTY.
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
LIGHT M
Classical Music
CLASSICS
Serious Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
PHONE IN
Phone-In
Programmes
TRAVEL
Travel and
LEISURE
Leisure and
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
You may search for a specific
by following these steps:
1
Programme Type (PTY)
Press BAND to select FM mode.
Press PTY
2
the remote control, the
will show the last PTY in use.
3
Press PTY
4
When the PTY is
on
repeatedly
to select
a
display
desired PTY.
selected, press PTY SEARCH.
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
Speech Programme
Music
Music
Programmes
Programmes
Programmes
Touring
Hobby
Music
Message
Broadcast Information
29
OPERATION
Language Code
Enter the
appropriate
(See page 16).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
30
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
18).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
DE
Barbuda
Verde
Republic
Georgia
& S. Sandwich
(USA)
Islands
Anguilla
Mayen
Islands
Republic
Principe
Territories
(French)
Tobago
Kingdom
Minor Outlying
Islands
Miquelon
(French)
City
State
Grenadines
Islands
Islands
(British)
(USA)
31
REF NC
Troubleshooting
Check the
following guide
for the
possible
of
cause
a
before
problem
contacting
service.
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
the power cord
wall outlet.
The power is on, but
the DVD/CD receiver
?
No disc is inserted.
?
Insert
does not work.
No
Plug
(Check
lit.)
picture.
?
The TV is not set to receive DVD
signal
?
output.
Select the
on
the TV
appropriate video input mode
so the picture from the DVD/
CD receiver appears
?
The video cable is not connected
?
securely.
There is
no
sound
or
?
Turn
?
The
?
Select the correct
connected with the
equipment
audio cable is not set to receive DVD
The audio cables
not connected
are
playback picture
is poor.
The DVD/CD receiver
does not start
the TV.
?
input
mode of the
so
Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
?
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
Insert
?
jacks
you can hear the
sound from the DVD/CD receiver.
securely.
The
on
audio receiver
signal output.
?
screen.
securely.
The connected TV power is turned off.
a
the TV
on
Connect the video cable into the
?
very low-level
sound is heard.
only
into the
that the DVD or,
audio CD indicator in the DVD display is
a
disc.
securely
connecting
cable is
damaged.
dirty.
Turn
on
the
equipment
connected with
the audio cable.
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
or
display
is
lit.)
?
An
disc is inserted.
unplayable
?
Insert
a
(Check the disc
system and Regional code.)
playable
type, colour
?
The disc is
placed upside
down.
?
disc.
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?
A
menu
is
dirty.
on
the TV
screen.
on
the disc
tray correctly
guide.
?
Clean the disc.
?
Press the SETUP button to turn off the
menu screen.
?
The
Rating
level is set.
?
Cancel the
the
Loud hum
or
noise is
?
The
plugs
and
jacks
are
dirty.
?
Wipe
or
change
level.
them with
a
cloth
slightly
mois-
tened with alcohol.
heard.
?
The disc is
?
The
?
dirty.
and
speakers
components
connected poorly.
are
The DVD/CD receiver is located too
close to the TV.
32
rating
function
Rating
?
Clean the disc.
?
Connect the
speakers
and
components
securely.
?
Move your TV away from the audio
components.
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
signal strength
weak (when tuning
tuning).
of the stations is too
Tune in the station
manually.
?
Preset the stations
(page 27).
?
Point the remote control at the remote
in with automatic
No stations have been
preset
or
preset
REF NC
?
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
does not work
?
The remote control is not
remote
properly.
?
sensor
pointed
at the
of the DVD/CD receiver.
The remote control is too far from the
sensor
?
DVD/CD receiver.
?
There is
an
obstacle in the
Use the remote control within about 23
ft
path
of the
of the DVD/CD receiver.
(7 m).
?
Remove the obstacle.
?
Replace
remote control and the DVD/CD
receiver.
?
The batteries in the remote control
flat.
are
the batteries with
new ones.
33
Specification
Power
Power
[Genral]
Refer to main label
Mass
External dimensions
[CD/VD]
[Video]
AM
[MW]
x
H
x
D)
360
x
75
x
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
Designs
34
5°C to
35°C, Operation
status: Horizontal
laser, wavelength
650
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 65 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
108.0 MHz
-
or
65.0
-
74.0
MHz,
87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Stereo mode
20W+20W(6Ωat1kHz,THD10%)
Front: 20W + 20W (THD 10 %)
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 20W
Outputs
S-VIDEO
Surround*: 20W
20W
+
Subwoofer*: 40W
(8Ω
(6Ω
at 30
at 1
kHz, THD
Hz, THD
10
10
%)
%)
MONITOR
Satellite
[Suplied Acesori ]
mm
625/50, NTSC 525/60
PHONES:
[Speakrs]
314
5% to 85%
Surround mode
[Amplifer]
kg
Temperature:
S-video
[FM]
(W
3.8
Operating conditions
Operating humidity
Video
[Tuer]
Refer to main label
supply
consumption
1
Type
Impedance
Frequency Response
Way
140
1
Speaker
-
Passive Subwoofer
1
Way
H
x
D)
1
(LHS-D6245W)
Speaker
8Ω
20,000 Hz
81 dB/W
Rated
x
Speaker (LHS-D6245T)
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(32 Ω, 20mW)
(1m)
60
-
1,500 Hz
80 dB/W
(1m)
25W
60W
50W
120W
90x138.5x100mm
160x350x345mm
0.89
kg
4.5
kg
?Speakers...........................6?Speakercables......................5
?Remotecontrol......................1?Batteries(AAA).......................2
?AMloopantenna.....................1?FMantenna.........................1
?SCART-RCAAdapter..................1?Videocable..........................1
and
specifications
are
subject
to
change
without notice.
P/N: 3834RH0023L
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising