Advertisement
Advertisement
LGESA_LH-T751TK.JAASLLA_ENG-135W DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T751TK (Main Unit: LH-T751 Speakers: LHS-75TKS, LHS-75TKC, LHS-75TKW) R USB Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this Safety Precautions About the CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN symbols Indicates hazards itself or for instructions likely to cause damage. harm to the unit other material CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE Indicates special operating Indicates tips and hints for features of this unit. making the task easier. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within an user about the presence of uninsulated dangerous within the product's enclosure that may be voltage of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. such as a book case or equipment in a confined space similar unit. CAUTION: This DVD/CD receiver To ensure proper use employs of this a laser system. product, please read this owner's manual unit tion carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, 2 apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. user instructions in the instructions WARNING: Do not install this Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. . ___________________________________ ___________________________________ Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 MovingtoanotherTrack...............21 RepeatTrack/All/Off...................21 Precautions.............................5 NotesonDiscs..........................5 Search.............................21 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................22 ViewingaJPEGdisc.....................22 RemoteControlOverview....................7 SlideShow.........................22 StillPicture.........................22 Preparation Connections............................8-11 TVConnections.........................8 OptionalEquipmentConnections . . . . . . . . . . . .9 Movingtoanotherfile.................22 Torotatepicture......................22 ProgrammedPlayback.....................23 RepeatProgrammedTracks................23 .23 ErasingaTrackfromProgrammeList the List 23 Erasing Complete Programme DivXDiscOperation.......................24 SpeakerSetup............................25 . AerialConnections........................9 SpeakerSystemConnection...............10 SpeakerPositioning......................11 BeforeOperation.......................12-17 Mini Glossary for Audio Stream & Surround Mode.................................12 SoundMode...........................12 On-ScreenDisplay.......................13 InitialSettings........................14-17 GeneralOperation....................14 Language..........................14 Display..........................14-15 Audio..............................15 Lock(ParentalControl)................16 Others.............................17 Operation DVDorVideoCDOperation...............17-20 PlayingaDVDandVideoCD...............17 . . . . . . . . . . . . . AdditionalInformation.....................26 LastConditionMemory...................26 ScreenSaver...........................26 SystemSelect..........................26 ControllingtheTV.......................26 OperationwithRadio....................27-28 Presettingtheradiostations................27 Listeningtotheradio.....................27 OtherFunctions...........................28 SleepTimerSetting......................28 Dimmer...............................28 Mute.................................28 UsingtheHeadphoneJack................28 SelectingtheInputSource.................28 XTS(ExcellentTrueSound)................28 XTSpro...............................28 GeneralFeatures.....................18-20 MovingtoanotherTITLE/GROUP. Moving to another CHAPTER/TRACK . . . . . . . . . . .18 . 18 SlowMotion.........................18 Still Picture and Frame-by-Frame Playback . 18 Search.............................18 Repeat............................18 RepeatA-B.........................19 Reference LanguageCodeList.......................29 CountryCodeList.........................29 Troubleshooting........................30-31 Specifications TimeSearch........................19 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................20 TitleMenu..........................20 DiscMenu..........................20 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .20 .20 Subtitles...........................20 DVDAudioDiscs........................20 3 Introducin Before Use Playable Discs ote When DVD playing back such discs, adjust the gradually, and keep the volume level low. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system must be connected to the digital output of the unit. TM TM Video CD (VCD) (8cm/12cmdisc) Audio CD Disc-related terms (8cm/12cmdisc) SVCD and CD-R or MP3, WMA, JPEG Title DVD-RW, DVD+RW, CD-RW that contains audio titles, or play CDs, excessive audio level volume (8cm/12cmdisc) can DTS-encoded volume before DVD audio discs addition, this unit DTS-encoded CDs may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the (8cm/12cmdisc) In on playing a DivX files. (DVD only) The main film content accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily. otes Depending on the conditions of the the CD-R/RW ment or itself, some cannot be CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. Do not attach any seal label to either side (the side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. labeled side or or the recorded Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Group (DVD otes on DVDs and Video CDs playback operations of DVDs and Video CDs Scene disc content On some or other functions may be added. sure to also refer to the instructions Make supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the only) accompanying feature con- or may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to designed by the software manufacturer, playback features of the unit may not be available or additional feature content, or music album. Each group is assigned a group reference number enabling you to locate it easily. tent Some audio discs The main audio content (VCD) Video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. unit. of Video CDs Types Regional code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed playback of region "2" encoded DVD software. region code on the labels of some DVDs 2 indicates which type of player can play those discs. This unit can only play DVDs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. The 4 There are two and manufactured for types of Video CDs: Video CDs PBC equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other still pictures Moreover, typical computer-like operations. of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Precautions Storing After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be disturbed the unit away from the TV, VCR, unit after removing the disc. To keep Do not or or turn off the volatile liquids, contact with the unit for leave marks Cleaning such as a use a discs Fingerprints or and dust the disc on reduce sound with a clean quality. cloth. Wipe Before distort the can picture clean the disc playing, the disc from the centre out- wards. on a insecticide spray, or long period plastic products in of time. They will the surface. the unit To clean the cabinet Use Cleaning temperature the exterior surfaces clean use the unit. Do not leave rubber near radio, as there may be a considerable increase inside the car. soft, dry cloth. If the surfaces soft cloth solution. Do not benzene, or use thinner, are moistened with lightly strong as a extremely dirty, detergent mild solvents such these as might damage alcohol, the surface Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static spray intended for About vinyl records. Symbols of the unit. About the To obtain clear a picture The DVD/CD Receiver is a high-tech, precision device. optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. If the " may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc on Discs DVD-V DVD-A Disc Handling VCD2.0 Hold the disc on will not VCD1.1 the surface. Do not stick paper that symbols specific DVD-Video disc. for instructions of the following symbol is represented by the symbol. one to the disc DVD and finalized DVD±R/RW. DVD Audio discs. Video CDs with the PBC (playback control) function. Do not touch the get playback side of the disc. by the edges so that fingerprints on A section whose title has applicable only Notes symbol display " Video CDs without the PBC (playback control) function. or tape on the disc. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel PHONES connector STANDBY/ON STANDBY indicator DISC Lights red when the receiver is in Standby mode (off). Tray FUNCTION/PLAY Press and hold down this button about 3 seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor USB host Connect to a USB MONO/STEREO/ port of PAUSE/STEP multimedia (USB memory etc.) TUNING(-/+)/SKIP(-/+) STOP buttons Power Cord SPEAKER connectors FM Antenna connector AV2 AUDIO Input (L/R)/VIDEO IN Connectors AM Loop Antenna connectors S-VIDEO OUT connector OPTICAL IN MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO a TV with Y Pb Pr Input (L/R)/VIDEO Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 6 inputs. IN Connectors connector Remote Control Overview POWER DVD Select the output source (CD/DVD) Selects or DVD tuner (FM and AM directly MUTE more at an audio an AUDIO SOUND MRAKER - SEARCH language (DVD) or (CD). PRESET/ Marks CH Selects the TV's b/B/v/V - . SCAN-/+(bb/BB) or Selects REVERSE SCAN backward*/go to beginning of current chapter or track or go to previous chapter or track. FORWARD Search a radio station's To D.INPUT on the program menu or a mark MARKER SEARCH on the (x) the DVD video Enlarges image. DIMMER Press to change brightness of the display window on the front panel during in power-on status. all. D.INPUT To select sequence. a digital input source. USB To enjoy the multimedia files. Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: (X) playback ZOOM REPEAT A-B Remote Control menu, if available. Stops playback. REPEAT Repeats Radio. (+/-) PAUSE/STEP STOP menu. Repeat chapter, track, title, or playback. Pause into track number selection. (B) Starts the tuner. a menu adjust speaker volume and TV volume. PLAY CLEAR Removes the Displays the disc's Title menu. frequency menu. TITLE VOLUME MEMO. Enter in the To tune in the desired radio station. SKIP SKIP( > ) Program option Select programme of TV forward*/go to next chapter or track. or removes an TUN(-/+) (b/B): PROG. Accesses source. PRESET/CH(+/-) (v/V): playback. Search display. (left/right/up/down) Acknowledges forward. SKIP( . ) menu. ENTER SLOW-/+(t/T) Reverse/ Forward slow MARKER SEARCH INPUT MENU Search backward menu. Accesses On-Screen DVD disc. menu on a setup DISPLAY SETUP Accesses the language (DVD). point during playback. a Displays + .. SOUND MODE menu subtitle a SEARCH audio channel setup automatically. MARKER sound effect. or removes off speakers. Removes the Selects the sound mode. Accesses only) RETURN AUDIO Selects System to turn specified time. Selects SUBTITLE XTS enjoy great TV SUBTITLE natural and realistic sound. To a Mute the XTS pro enjoy (LG SLEEP MUTE service, programme number select numbered options in a a menu. To source. Set the bands) or input To control the TV. SLEEP 0-9 numerical buttons Select tray. TV BAND System's and closes the disc AUX accesses Select the ( Z) OPEN/CLOSE Opens About 30° in each direction in front of the remote sensor Remove the remote battery battery cover on control, and insert AAA) batteries correctly. with installation the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the one capabilities following connections, depending existing equipment. on of your Progressive Scan (ColorStream pro) connection If your television is ips Depending high-definition a or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest your TV and other equipment you wish there are various ways you could connect connect, the DVD/CD Receiver. Use one of the connection on to video resolution methods described below. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/CD Receiver. Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the possible. System Connect the COMPONENT VIDEO OUT jacks from the best connections. DVD/CD Receiver to the Caution Make TV the DVD/CD Receiver is connected sure to the TV. Select the correct AV using corresponding in jacks (C). on the Y Pb Pr cable optional directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input an on Rear of TV protection system. VIDEO INPUT S-VIDEO INPUT S-Video connection Connect the S-VIDEO OUT Receiver to the S-VIDEO IN S-Video cable jack on the DVD/CD jack on the TV using COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb Pr L the (S). Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on Video (Color Stream DVD/CD Receiver to the an C connection ) Connect the COMPONENT VIDEO OUT using V S the supplied (V). Component TV using Y Pb Pr corresponding cable (C). jacks from the jacks on the in Rear of DVD/CD Receiver otes Set the Progressive to "On" on the Setup progressive signal, see page 15. Set the progressive to "Off" by removing from the unit and close the disc tray. disc" is window. displayed on the display see STOP and hold it for five seconds before Progressive scan video connections does not work with the (yellow S-VIDEO connection. 8 VIDEO OUT menu for any disc that "no Then, press releasing analog jack) or it. Connections (Continued) Optional Equipment Connections 1 2 3 Connect a VCR to the AV IN connectors. Connect an optical output Connect the USB port of of DVD a USB Player (or Digital Memory (or MP3 Device etc) player, etc.) to the OPTICAL IN connector. to the USB HOST on the front of the unit. Prepa tion VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT DVD Player (or Digital Device, etc) (L/R)/ VIDEO OUT OPTICAL OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) To AUDIO IN VIDEO IN To AUDIO IN VIDEO IN (L/R)/ (AV1) (L/R)/ (AV2) otes If the audio format of the produce a digital output does not match the capabilities of your DVD/CD Receiver, the receiver will strong, distorted sound or no sound at all. The DivX files in your memory card will not be able to be play. Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Loop aerial to the AM aerial connector. Connect the AM Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure After to fully extend the FM wire aerial. connecting the FM Wire aerial, keep it as horizontal as possible. 9 Connections (Continued) Speaker System Connection Connect the speakers using To obtain the best the supplied speaker surround possible cords. sound, adjust the speaker parameters (volume, distance, etc.). Front Front speaker (Right) speaker (Left) Center 6 6 6 speaker 6 6 Rear speaker (Left surround) Rear speaker (Right surround) Subwoofer otes Be sure to match the If the cables are speaker speakers Do not the front 10 appropriate terminal on the components: + to + and -- to --. reversed, the sound will be distorted and will lack base. If you use front the speakers. remove cable to the with low maximum cover of input rating, adjust supplied speaker. the volume carefully to avoid excessive output on Connections (Continued) Speaker Positioning In the of normal case position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subplay the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want to connect a subwoofer. woofer). ? ? Front speakers According to your listening position speakers to 45 degree. Centre speaker speakers The centre ? and front set up the speakers are for speakers ideally the equal same distance. And height. But by hearing position normally place it above or set up the interval between below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear ? case of a smaller above 60 speakers room - 90 size, if the audience is cm than the listener 's near to the rear wall set the rear each speakers opposite other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example About Ferrite Core Be sure cables (OPTIONAL) to attach the ferrite (for connecting This ferrite core to this Press the speaker unit). reduce noises. core can How to attach the ferrite 1 to the core stopper [a] of the ferrite core to open. 2 Wind the cable 3 Close the ferrite once on the ferrite core. The core length short unitl it clicks. as here is much as possible. Note: Attach the ferrite and core near the unit (Refer to the fig.3 comment.). 11 Prepa tion Before Operation Glossary for Mini Audio Stream & Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as DVD and compact discs, etc.bearing the trade- quality digital discs, mark. DTS Digital Surround delivers up to 6 channels of means identical to the original transparent audio(which and results in exceptional clarity throughout a degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. masters) true 360 When DVD is inserted You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) 3 ENG D 2CH button Bypass Dolby Digital surround format lets you enjoy up to digital surround sound from a Dolby Digital program source. If you play DVDs with mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. AUDIO ) by pressing repeatedly. (For example 2 ENG D 2CH or button, press SOUND Music Movie Matrix The 5.1 channels of " " After you select 5.1 channel b) (For example 1 ENG D 5.1 CH or 4 ENG DTS ) by pressing 5.1 CH " -" - AUDIO indicator will be "BYPASS" indicator button, press SOUND button. displayed on the TV screen. will be only displayed on the display window. (II) Dolby Pro Logic II creates five full-bandwidth channels from two-channel an sources. output This is done using advanced, high-purity matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: use BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use → → with any stereo music ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. When CD is inserted recordings. MATRIX mode: The Matrix mode is the same as Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the the Music mode order. except that the directional enhancement logic is following turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... also find use → → with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that the is inserted Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. → The Movie mode is for approaches When Video CD in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be → → You BYPASS - to the way it was → → → identify the encoding format of program by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can software - played according → → For your reference ? - Software with multichannel surround audio → → signals recorded. is ote When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). 12 Before Operation (Continued) On-Screen You use the Some items screen. To general playback status on the TV can be changed using the menu. on-screen display: display can Display the Example: On-Screen Display during playing DVD Video Items Selection Method Title Number 1/3 b / B, Numbers ENTER 1 2 Press DISPLAY during playback. Chapter Press v / V to select The selected item is an Number 1/12 b / Time search highlighted. 3 change the the number buttons if use inputting the title setting. You can appropriate (e.g. number). For press ENTER to execute the some also 0:20:09 Numbers, ENTER A-B Repeat title Repeat sequence Resume Action play language Digital Audio Output mode b/Bor and AUDIO functions, Subtitle setting. language A BC SUBTITLE prohibited or point Items If no button is screen Selection Method Track Number provide all of the features pressed for 10 seconds, display disappears. b/B Bypass Example: On-Screen Display during playing VCD not available otes Some discs may not shown below. b/B 1/3 Sound from this b/Bor 1 ENG Angle PLAYBACK STATUS/RESTRICTIONS Title Prepa tion ENTER item. Audio Press b / B to B, Numbers the on- (or PBC 1/3 b / B, Numbers ENTER mode) Numbers Time search 0:20:09 ENTER b/Bor Audio Channel AUDIO Sound Bypass b/B Example: On-Screen Display during playing DVD Audio Items Group Selection Method b / Number ENTER b / Track Number 0:20:09 Audio language Digital Audio Output mode Display only b/Bor and language B, Numbers ENTER Time search Subtitle B, Numbers AUDIO OFF ABC Display only b/B Page (or Angle) or 1/3 13 Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also By using LANGUAGE language for the subtitles and the Setup menu, among other things. For details on each Setup menu set a item, To see Press SET UP to display the menu. setup Select appears. option then as well as alternate setting(s). Use v / V to select the second desired then press B to 5 v / V to move option to the third level. select the desired setting menu and or PLAY to exit the Original: disc was Refers to the on-screen DVD-V display. DVD-A audio track original language (disc in which the recorded. Other: To select another language, press number buttons to enter the according to the enter the wrong remote control. corresponding 4-digit number language code list on page 29. If you language code, press CLEAR on the then press ENTER to confirm your selection. Some items require additional steps. Press SET UP Setup language you prefer for the audio), subtitles, and the disc menu. press B to move to the second level. The screen will be shown the current setting for the Use for the language Disc Audio / Subtitle / Menu Use v / V to select the desired item, a Select the menu Select OSD Press SET UP. 4 Original Move Operation selected 3 Off Disc Menu A second press of the remote control. on General 2 Disc Subtitle screen. To go back to the previous level: Press b on the remote control. The Original and exit the Menu: SET UP will take you back to initial To go to the next level: 1 English Disc Audio pages 14 to 17. display Press B OSD DISPLAY setup DISPLAY menu. TV 16:9 Aspect Display Mode Progressive Widescreen Off Scan Move TV Aspect DVD-V 4:3: Select when a 16:9: Select when Display Display Mode Mode Select DVD-A standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD-V setting DVD-A works only when the TV Aspect mode is set to "4:3". Letterbox: Displays a wide picture with portions of the screen. bands on the upper and lower Panscan: the entire 14 Automatically displays the wide picture and cuts off the portions that do not fit. screen on Before Operation (Continued) Scan Progressive AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) television, set Progressive Select 1 menu scan set signal, "Progressive then press B the Progressive Scan" variety type of audio system you Scan to Off. of audio on 5.1 a Scan to On. Prepa tion Select Speaker Setup DRC On Vocal On the DISPLAY . Move Select Off Aspect Display to use. DISPLAY TV output options. options according AUDIO If you are using the Component Video jacks for connection to a TV or monitor that is compatible with progressive a Set the DVD/CD Receiver's AUDIO On Mode Progressive 5.1 Scan Speaker Setup DVD-V DVD-A Select speaker settings, including volume balance and or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25) distance, Move 2 3 4 Select "On" using Select Dynamic Range the v / V buttons. DVD-V DVD-A Control (DRC) DivX Press ENTER to confirm your selection. menu will appear. With the DVD When the confirm you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds The confirm Cancel is menu appears on your screen default. Use the b / B highlighted as highlight Enter. buttons to to scan possible, and the ENTER will set the DVD/CD Receiver 5 Pressing Progressive format, you can hear a program's soundtrack in the most accurate and realistic presentation at a thanks to digital audio technology. However, quietest ones). Then, you may listen to a movie losing dialog intelligibility. lower volume without Set DRC to On for this effect. mode. otes The DRC function works Caution Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan an The level of depending only during playback of recorded discs. Dolby Digital Dynamic Range Compression on may differ the DVD disc. to On in error, you must reset the unit. Vocal 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP release it. The video standard visible on a for five seconds then Set Vocal to On only DVD is The karaoke channels mix into playing. a when a multi-channel Karaoke on the disc will normal stereo sound. to the picture will once again be conventional analog TV or monitor. setting, and (x) output will be restored DVD-V a 15 Before LOCK Operation (Continued) Password (Parental Control) You LOCK Unlock Rating **** Password Follow Move that may not be suitable of these discs contain parental scenes Many applies control information that to the complete the disc. Movies and disc or rated scenes are 1 2 Enter or setup the LOCK menu. then, press menu Code the 6-digit number security code is a new code can "210499" on clear it the using setup menu cleared. described above. as ote your children from being able to view material you believe is unsuitable. on then press B. then press ENTER. forget your Security Input When "Rating" it and the parental control feature allows you to block access to scenes below the rating you input, thereby preventing B menu (Rating). "Change" If you forget your security code you the following steps: to The Select highlighted. new 4-digit code, again to verify. Press SET UP to exit the from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. 1 2 the LOCK on shown left as Select DVD-V scenes on 2 Enter the If you certain step "New" is 4 for children to view. change password. Select Password Input Some movies contain or 1 3 Rating enter 2 Code Country can (Security Code) " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country DVD-V Code . Enter the code of the To the access Code Password and Rating, features, you must input code you created. If you have not yet entered a prompted to do so. the Country 4-digit were in the reference security security code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3 Selectaratingfrom1to8usingthev/V buttons. Rating 1-8: Rating rating eight (8) and (1) one has the most restrictions is the least restrictive. country/area used to rate the DVD-Video whose standards disc, based on the list chapter. 1 Select 2 Follow 3 4 Select the first character second character 5 selection. "Country Code" on the LOCK menu, then press B. step Shift the 2 as cursor shown left (Rating). using v / V buttons. using B button and select using v / V buttons. the Unlock If you select and the disc unlock, parental control is plays not active in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available same rating on not played lower or a one. found, playback stops. You word 4 or unless an alternate scene the disc. The alternative must have the change the rating If no suitable alternative is must enter the level in order to 4-digit passplay the disc. Press ENTER to confirm your rating selection, then press SET UP to exit the menu. 16 Press ENTER to confirm your country code Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on VCD2.0 DVD the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn and select the on input the audio source Operation system connected to the DVD/CD Receiver. Select Move PBC Set 1 VCD Playback Press OPEN/CLOSE Control to On (PBC) On:Video CDs with PBC or Off. to the 2 facing played are the same way as Audio CDs. 3 DivX(R) Registration You can DivX show the DivX DRM Your Please the registration use DivX(R) : using the To learn only. more automatically. (Z) to close the sure tray. the TV screen, and playback If playback does not start, on might menu appear instead. If with Video On Demand service. DivX(R) tray, with the label XXXXXXXX register this player This will allow you to rent and READING appears press PLAY. In some cases, the disc (Digital Right code is this code to Press OPEN/CLOSE starts code for your unit Management) Registration tray. up. When a double-sided DVD is inserted, make the side you want to play is facing down. PBC. Off:Video CDs with PBC to open the disc Load your chosen disc in the played according are (Z) The purchase videos DVD Video On Demand format. a menu screen is displayed may be displayed first after Video CD which contains a menu. menu screen or loading a go to www.divx.com/vod DVD-V The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Use the b/B/v/V buttons to select the an encrypt movie file. want to or view, then press ENTER DVD MENU to return to the title/chapter you to start. Press TITLE menu screen. DVD-A otes If you rent the DivX VOD file, it has several viewing limits as show below. options of Use the b/B/v/V buttons to select an option you want, then press ENTER to view the option. VCD2.0 ? Display the number which you can watch the file. Use the number buttons to select the track you want to view. Press RETURN to return to the ? This rental video has 7 views left. A view ends when you stop video, or playback, play player. different use one of your 7 views Yes The rental has been Display expired. the authorization This video player expired. error. is not authorized to play this video. operating procedures for depending on the disc. the menu may differ Follow the instructions on the each menu screen. You also may set PBC to Off under setup. otes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental ? menu screen. and the exact now No This rental is setting using turn off your Do you want to ? a Menu Control", (see page 16). region code. on DVDs may have a Your receiver will not play discs that have code different from your receiver. The this player is 2 (two). region region code a for 17 DVD Video CD or Operation (Continued) Still Picture and General Features DVD-V ote Unless stated otherwise, all operations described use move to another TITLE/GROUP DVD-V a disc has than more title/group, one title/group as you can follows: Press DISP., then press the appropriate numbered button (0-9) Moving DVD-V When to select a a title number. title VCD2.0 on a more as Press . or VCD1.1 disc has than chapter/track one than more track, you one chapter can move to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). For two-digit numbers, press (0-9) in rapid succession. Slow Motion DVD-V Press SLOW -/+ VCD2.0 during 1/8, t 1/4 1/16, T 1/8, T 1/4 To exit slow motion To exit SEARCH 1 To playback now go into SEARCH mode. to select the mX8, mX16, DVD-V mode, press PLAY. DVD-A - VCD2.0 VCD1.1 DivX Repeat Chapter/Title/Off repeat the currently playing chapter, press The To Repeat Chapter on the TV screen. repeat the title currently playing, press REPEAT The icon appears To exit second time. a Repeat Title icon appears Repeat mode, on the TV screen. press REPEAT a third time. The Repeat Off icon appears on the TV screen. pause. Video CDs or t 1/2 or T 1/2 required speed: t (backward), or T (forward). 1 To reverse is not applicable for 3 To Repeat Track/All/Off repeat the track currently playing, press Repeat Track icon appears on the TV screen. repeat the disc currently playing, press REPEAT second time. a Repeat All To exit icon appears Repeat mode, on the TV screen. press REPEAT a third time. The Video CD. - REPEAT. The 2 mode, press PLAY. ote in during playback. REPEAT. The Slow motion VCD1.1 or M DVD-Video discs VCD1.1 Use the SLOW -/+ to select the t or M The DVD/CD Receiver will Repeat 3 The receiver will enter SLOW mode. 3 3 the numbered buttons DVD-A Press m VCD2.0 DVD-A (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). 2 ote DVD-V picture frame-by-frame by pressrepeatedly on the remote control. mX100 or a follows: 3/ 4 go into PAUSE advance the can PAUSE/STEP Press m to another > press DISP. Then, press now repeatedly 2 required speed: mX2, mX4, DivX briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, 2 1/16, 1 to another CHAPTER/TRACK DVD-A disc has 1 2 ing Search to another DivX during playback. The DVD/CD Receiver will You DVD-A When Press PAUSE/STEP VCD1.1 mode. the remote control. Some features may also be available on the Setup menu. Moving 1 Frame-by-frame playback VCD2.0 DVD-A Repeat Off icon appears on the TV screen. ote On a the setup 17. 18 Video CD with menu to PBC, you use the must set PBC to Off Repeat on function. See page DVD Video CD or General Features Repeat To repeat A-B DVD-V (continued) DVD-A a briefly Press A-B on again A-B appears sequence VCD1.1 DVD-V You from can briefly begins. the TV start points To enter title: Press A-B at your chosen A- appears VCD2.0 Marker Search nine sequence in a Operation (Continued) starting point. 1 screen. a playback Press DISP. play during playback. appears on the on a VCD1.1 The playing at dis- The Time Search box shows the seconds, press Search icon in the 3 /4 on-screen time of to select the Time seconds, enter the required use display. the number buttons to start time. Enter minutes, and seconds from left to hours, right If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct remove num- bers. points playback, The MARKER SEARCH press SEARCH. menu will appear seconds, press 1/2 on the to select screen. marker a number that you want to recall. To will start from the Marked remove scene. the MARKER SEARCH menu, press To clear a Marked Scene 1 During playback, 2 3 4 Repeat steps 5 The MARKER SEARCH press SEARCH. menu will appear on the screen. Press 1/ 2 to select the marker number that you want to erase. Press CLEAR. Within 10 seconds, press ENTER to confirm the start time. starts from the selected time Playback point. 1 During 2 3 Playback 4 disc in the box. enter 1 to enter up to nine Marker SEARCH. The "-:--:--" appears in the Time Search box. Within 10 briefly. Press ENTER. elapsed playing the current disc. Within 10 screen Marked Scene a Within 10 screen. the TV on disc. disc on-screen to During disc playback, press MARKER when playback reaches the spot that you want to 2 Repeat step The Time Search function allows you to start any chosen time on the disc. point. Up mark, follow these steps. To Recall Time Search memorized a be memorized. can The marker icon will appear To cancel the sequence, press A-B. VCD2.0 VCD1.1 memorize. at your chosen end point. the TV screen, and the repeat on DVD-V VCD2.0 an invalid on the disc. If you time, playback will continue from the current The marker number will be erased from the list. 2 and 3 to erase additional marker numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom DVD-V DVD-A VCD2.0 VCD1.1 DivX The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback If you press ZOOM increases up to four 100% size → 1600% size 2 or still playback activate the Zoom function. repeatedly, 400% size → the → 800% level → 100% size Use the 1234 buttons to zoomed magnification steps. move through the picture. ote The zoom function may not work for some DVDs. 19 to Operation DVD Video CD or Operation (Continued) DVD Features Special DVD-V A DVD-A DVDs may contain menus that allow you to access features. To use the disc menu, press MENU. to select the 1/2/3/4 buttons to quality that is closer to the artist's master recording or longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. an high- press ENTER. ote To DVD-V Title Menu DVD-A If the current title has the 2 menu can list menu, the menu menu will appear on may appear. angles, spoken lanoptions, and chapters for the camera guage and subtitle title. DVD-V is menu groups. Your player enables you to quickly access different groups during playback via the on-screen DVD-A displayed. display. the Audio Changing Language DVD-V DivX Press AUDIO different audio Changing Press AUDIO repeatedly during playback language or audio track. to hear 1. Press DISP. 2. Press 3/4 to select Press 1/2 3. a or during playback Group in on stop mode. icon. the numbered buttons (0-9) to select a group number. Note: the Audio Channel VCD2.0 to hear repeatedly during playback (STER., LEFT or RIGHT). VCD1.1 Sometimes the author of the disc creates hidden content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's a different audio channel ote If to another GROUP Some DVD Audio discs divide content into different DVD-A Press MENU. The disc and surround effect of receiver). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. Moving Disc Menu quality Audio, you must use 5.1 channel analog audio output (5.1CH AUDIO OUT jacks on the DVD/CD Otherwise, the disc screen. The a maximum sound enjoy DVD Press TITLE. 1 used for for special Then, press the appropriate number button times the music, either Advanced Resolution multi-channel sound Checking the contents of DVD Video discs: Menus option. Alternatively, use light your selection, then typical DVD Audio disc contains up to seven capacity of a CD. This additional space is data jacket appears, the feature is not available on the disc. cover or on a isn't dictated by web site). This password your DVD/CD receiver --- it is control a function of the disc. Subtitles DVD-V Press S-TITLE DivX Since the repeatedly during playback languages. to see the different subtitle otes The subtitle file of the DivX file is displayed only smi, srt and sub. If there is no or there is file, "1/1" etc a are code that can displayed. DVD Audio Discs building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio a new disc format can provide higher quality stereo than Audio sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). CDs with 20 a authoring of DVD Audio Discs varies, some of display choices might not be available for you're playing. on-screen the disc another PAGE Viewing Since DVD Audio discs information not read in the DivX DVD Audio is the are various ways to 1. Press DISP. 3/4 can hold a lot of content, there on the disc. what's available see during playback. 2. Press to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the the authoring of DVD Audio Discs varies, some of display choices might not be available for you're playing. on-screen the disc Audio CD Playing Disc an CD MP3/WMA Disc or Operation Audio CD and MP3/WMA MP3 Repeat Track/All/Off You WMA can play title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver recordings on MP3/WMA formatted play can CD-ROM, CD-R, or CD-RW discs. 2 Press REPEAT to select ? TRACK: Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press ? ALL: ? Off(No display): or ENTER and playback on a WMA disc. disc. The repeat icon desired a repeat mode. the current track repeats repeats all the tracks does not on a Operation disc. play repeatedly. starts. 1/12 0:00:00 playing a MP3 appears. Audio CD PLAY CD Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Search CD 1 Press m or or WMA Mduring playback. The receiver will 2 Press m MP3 now M go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3 To exit SEARCH required or MX2, mode, press PLAY. MP3 / WMA 1. Press v / V to select 2. a folder, and press ENTER to the folder contents. see Press v / V to select ENTER. Playback a MP3 / WMA disc track then press PLAY or starts. limited ? as compatibility with this player is follows: Sampling frequency: within 32 48 within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz The DVD/CD Receiver cannot read an - (MP3), - 0:00:00 1/104 MP3 ? List Program 1-Music1 ? 2-Music2 - MP3/WMA 3-Music3 file that has 4-Music4 file extension other than a 5-Music5 ".mp3" / ".wma". 6-Music6 7-Music7 ? CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is otes If you are in file list a on to return to the Folder the MP3/WMA list, use menu the v / V to Press MENU to On a move highlight ? CD with MP3/WMA file and JPEG file, you can Press TITLE and menu. MP3/WMA top of the JPEG word or use menu is high- b / B to select MP3/WMA or JPEG on then press ENTER. Pause CD WMA Press . track or press PLAY another Track or > or In case of audio CD CD, should have They should not to step back to go using a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? *:"<>letc. ? The total number of files on the disc should be less than 999. requires discs and recordings directly to the WMA to the next track. previous to any optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go beginning of the current briefly the track number names incorporate are press to return to the Press . twice ? File must Creator, which achieve during playback. playback, again. MP3 / WMA files. We to meet certain technical standards in order to PAUSE/STEP Moving to playback This DVD/CD Receiver MP3 1 Press PAUSE/STEP 2 To return to to format should be ISO 9660 recommend that you use Easy-CD creates an ISO 9660 file system. to the next page. switch MP3/WMA and JPEG lighted. Then, impossible and want and press ENTER. physical track, the numbered buttons track. enter (0-9) these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. during playback. 21 JPEG Disc Viewing This unit Operation JPEG disc a JPEG JPEG disc play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. as can Insert disc and close the a The JPEG menu appears notes on ? is limited player upon the size and number of JPEG a long time for the DVD/CD Depending Receiver to read the disc's contents. If you don't display after several minutes, see an on-screen the TV screen. of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List with this files, it could take tray. on compatibility follows: Preview --- pixels and burn another disc. JPEG Folder 1 ? JPEG Folder 2 The total number of files and folders on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 ? JPEG Folder 7 JPEG Folder 8 Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the 2 previous Folder remote to 3 list, the v / V buttons use on ? Windows viewing a file, you can press STOP previous menu (JPEG menu). to move four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v/V/b/B to highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are (Slow), >> JPEG SLIDE SHOW Use vVbBto to highlight the (Slide Show) then press ENTER. JPEG STILL PICTURE 1. Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP show, press PLAY (. or >) to advance to the next or once Press b / B 22 during showing clockwise or while previous TO ROTATE PICTURE picture press again. JPEG MOVING TO ANOTHER FILE Press SKIP or a viewing a picture file. JPEG picture to rotate the counter-clockwise. the files copying different by are into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without names While ips ? File them to be read There > If the files have rename If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. to the ? ? a Ensure that all the selected files have the extensions when the and press ENTER. highlight ? Some discs may be incompatible due to recording format or the condition of disc. ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though Programmed Playback CD MP3 WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Program playing a below. Press REPEAT to select a disc. The desired 1/104 MP3 List Press REPEAT when repeat icon appears. 2. 0:00:00 can repeat mode. JPEG ? TRACK: ? ALL: ? Off(No display): Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 repeats the current track repeats all the tracks on programmed list. does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu MP3/WMA Menu 1. Use vVto select the track that you wish to Program list. erase from the 2 Select or a select track on the "List", then press PROGRAM " 2. (Add)" icon then press ENTER to the selected track on the "Program" list. place Repeat to place additional tracks on the list. You can Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks ote add all tracks in the disc. Select " ( Add All)" icon then press ENTER. " Press CLEAR. on the list. ERASING THE COMPLETE PROGRAM LIST 3 Select the track you want to start playing on the "Program" list. Press MENU to move to the next Use v / V to select page. 4 (Del all)", then press ENTER. ote Press PLAY or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" list have To normal resume 5 back, " select a played on in The programs are also cleared when the disc is removed. the once. playback from track of AUDIO CD programmed play(or MP3/WMA) list and then press PLAY. 23 Operation DivX Disc Using this DVD/CD Receiver you Insert 1 Operation a appears disc and close the on the TV can play DivX disc. DivX disc tray. The DivX menu as with this player is limited screen. ? 0:00:00 compatibility follows: Available resolution size of the DivX file is under 720x576 1/12 (W x H) pixel. DIVX ? List The file name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 ? Movie Folder 4 If there is Movie Folder 6 Movie Folder 8 ? If the number of the 1 2 a folder, and press ENTER. A ? list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight " " _ Press STOP to exit. frame is over 30 per operate normally. interleaved, either video or audio is out- If the file is recorded with ports If you want to view a particular file, press v / V to a file and press ENTER or PLAY. not If the video and audio structure of recorded file is not ? 3 highlight screen second, this unit may putted. and press ENTER. 4 code to express in the DivX as mark on the dis- play. Movie Folder 7 Press v / V to select impossible file, it may be displayed Movie Folder 5 by (different by language). * some of 1-point GMC, the unit supof the record level. GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 There encoders, like DivX are or Xvid, have this option. different levels of GMC 1-point, 2-point, or 3-point encoding, usually called GMC. otes ? Be to select "SUBTITLE ON" mode before sure DivX file ? playback ENTER every time. When the subtile has more than two languages in the original subtile is only file, available. ? The Pro ? The DivX files in your memory card will not be able to be play. a by pressing logic II Sound mode is not available for DivX file. Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz - within 24 ? Bit 40 24 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - (MP3), Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. Distance If you connected speakers to your DVD/CD Receiver, the distance lets the speakers know how far the setting 1 2 3 sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The setup menu appears. listener at the Use v / V to select the AUDIO option then press Use v / V to select the move time. adjust the Distance of the selected speaker. B to move to the second level. then press B to is highlighted. same Press b / B to Speaker Setup option to the third level. "Select" ote You Press ENTER and 5.1 4 appears. Speaker Setup menu can adjust the distance speakers (left & right) only. of Center speaker and Rear Test AUDIO Press b / B to test the Adjust Speaker Size Front L memorized in the Small Front Left Volume 0 dB Distance 2 m Test Rear Move Use b / B to select the desired 6 Adjust options using 7 speaker. signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer Off Select 5 of each signals the volume to match the volume of test v Return Enter speaker. / V / b / B buttons. Press ENTER to confirm your selection. The unit returns to the previous menu. Speaker Select speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Speaker, SubWoofer, Rear speakers (Left), or speakers (Right)) a Center Rear ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the speaker settings are fixed, you cannot change them. Volume Press b / B to speaker. (-5dB adjust the output +5dB) level of the selected ~ 25 Operation Additional Information Last Condition Memory Controlling DVD This DVD/CD Receiver memorizes the user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load memorized, the latest stop a tings ly recalled. position the TV Your remote control is DVD/CD Receiver as of operating your limited functions of LG TV. capable well as Follow the instructions below to operate for your LG TV. disc that has its setis automatical- Before 1 using the remote select the device to be control, press the TV To switch the remote control mode different device), be to operated. (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 The POWER, CH( E / D ), VOLUME (+/-), and INPUT on remote control are used to operate the buttons LG TV. a Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. Screen Saver The Setting appears when you leave the DVD mode for about five minutes. (E/D) button screen saver player in Stop ote If the remote control does not System TV, try the other code Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select system (PAL, NTSC or a AUTO). When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected with Multi NTSC: system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. 26 originally supplied Due to the variety or use with the LG TV. of codes used OUR COMPANY cannot control will operate your particular the remote control (LG and Gold Star) by manufacturers, guarantee that the operate every model of LG TV. remote Operation Presetting You can tuning, preset make with Radio the radio stations 50 stations for FM and AM sure Before (MW). Preset radio stations in the DVD/CD Receiver's memory (see "Presetting radio stations" on the left). that you have turned down the vol- first the remote control until FM 1 ume. Press BAND 1 AM (MW) on appears in the display or window. And then every time you press AM (MW) changes alternately. BAND, FM and 3 Press and hold TUNING or 2 panel for about two seconds frequency indication starts to change, until the appear in the display on ( D/ E ) the on a program) Press PROG./MEMO. 6 again. To listen to For manual want. the remote control or etc.,). automatic tuning, tuning press TUN(-) repeatedly. in step b or 2. TUN (+) B on (+) tuning, press and hold TUN(-) b or B for about two seconds on the remote control. 3 to 6 to store other stations. station with Press TUNING a weak in step 3 manually. Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the display window again, the stations are and then press PROG./MEMO. cleared. If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" will go off by itself and change to mode. the number buttons on the remote control preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 To clear all the stored stations preset radio station directly a can use to select signal repeatedly or to tune in the station display AV 1, For automatic You a or the remote control on (DVD/CD, non-preset radio stations Use manual To select To tune in - Press POWER to turn the DVD/CD Receiver off TUN Repeat steps by rotating VOLUME on the by pressing VOLUME + or on the control repeatedly. or select another function mode the remote control. The station is stored. 7 preset the remote control on station you want. To turn off the radio the remote control to select preset number you PR(D/E) repeatedly remote preset number will flash in the display window. Press PR FM appears in the or the volume window. Press PROG./MEMO. A stereo Press to select the front when the DVD/CD Receiver tunes in (for display 3 Adjustpanel then release. Scanning stops (MW) window. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. on the front Press BAND until AM The last received station is tuned in. 2 station. "TUNED" and "STEREO" to the radio Listening a (within 3 seconds). For your reference If an FM program is Press MONO/ST. noisy panel so that display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo "STEREO" on the front disappears in the effect. To improve reception supplied antennas. Reorient the ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, follow the steps a 5-6 as above. 27 Operation Other Functions Sleep Timer You set the DVD/CD Receiver to turn off automati- can cally at a Setting specified time. The SLEEP indicator and play sleep sleep time. time appears in the dis- enjoy the vivid stereophonic sound of the original source without any signal distortion. setting changes SLEEP 180 →150 →120→90→80→70 →60→50→ Each time you press XTS during 2 channel setting changes in the following order. XTS- 1: sound XTS- 2: high display front Dimmer rear by playing the sound speakers same as the speakers. can operate both XTS- 1 and XTS- 2 ote Using the Headphone Connect a stereo headphone PHONES connector. Jack plug ( 3.5mm) into the speakers are automatically disconnected in a headphone (not supplied). the Selecting can use VCRs IN, AV2 IN when you or other units connected to the Optical connector. Refer supplied with the unit for further operation. or on the Press AUX and D.INPUT repeatedly on the input source. remote control to select the desired Each time you press this button, the mode of the funcchanges in the following sequence: tion AV 1: for selecting the analog signal from AV1 AUDIO IN & VIDEO IN Connectors. AV 1 OPT: for selecting the optical digital signal from AV1 VIDEO IN & OPTICAL IN Connector. AV 2: for selecting the analog signal from AV2 AUDIO IN & VIDEO IN Connectors. AV 2 OPT: for selecting the optical digital signal from AV2 VIDEO IN & OPTICAL IN Connector. otes The Optical input function is available only when Sampling Frequency is 32 96kHz. You can also select the input source by pressing FUNC. button on the front panel. other unit's ~ the changing changing it to XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the following order. XTS-P ON to the owner's manual information disabled when 2.1 CH. the Input Source connectors temporarily from 2.1 CH to 5.1 CH and it is enabled when You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. 28 You effect via the The XTS- 2 mode is Press MUTE to mute your unit. (L/R) of sound at woofer woofer at the XTS- 2 mode. repeatedly. Mute (L/R) sense simultaneously and it can complement the relative degrading of the sound pitch of the This function will change the brightness of the display window on the front panel during in power-on status. AV1 playing the movie with the weak bass relatively to the general music, it for you to satisfy with. In the mode of 2 CH BYPASS, It creates the source XTS- 3: Press the DIMMER When enforces the You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. You mode, Tips: ote plug Sound) the 40→30→20→10 →OFF The True can XTS-1→XTS-2→XTS-3→NORMAL... window. Each time you press SLEEP the in the following order. 2 (Excellent You digital Press SLEEP to set the desired 1 XTS → XTS-P OFF setting changes in Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 8471 8479 Country Codes Choose a country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY Czech Republic UG Denmark DK Japan Kenya Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW 29 Refrnce Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. Insert a disc. (Check securely that the DVD or, ? The TV is not set to receive DVD signal ? output. Select the on the TV ? The video cable is not connected ? securely. sound or appropriate video input mode the picture from the DVD/ The connected TV power is turned off. ? Turn The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables not connected are playback picture is jacks the TV. ? input mode of the so Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. ? screen. you can hear the sound from the DVD/CD Receiver. securely. The on audio receiver signal output. ? the TV Connect the video cable into the ? a on securely. ? very low-level sound is heard. only is so CD Receiver appears no display lit.) picture. There is into the audio CD indicator in the DVD does not work. No service. connecting cable is damaged. dirty. Turn on the equipment connected with the audio cable. it with a new one. poor. The DVD/CD Receiver does not start ? playback. Insert a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) ? An unplayable disc is inserted. ? Insert a playable disc. the disc (Check type, colour system and Regional code.) ? The disc is placed upside down. ? Place the disc with the playback side down. ? The disc is not placed within the guide. ? Place the disc inside the ? The disc is ? A menu is dirty. on the TV ? ? screen. on the disc tray correctly guide. Clean the disc. Press the SET UP button to turn off the menu screen. ? The Rating level is set. ? Cancel the the Loud hum or noise is ? The plugs and jacks are dirty. ? Wipe function Rating or change level. them with a cloth slightly mois- tened with alcohol. heard. ? The disc is ? The dirty. speakers and components poorly. ? are ? connected ? The DVD/CD Receiver is located too close to the TV. 30 rating Clean the disc. Connect the speakers and components securely. ? Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? ? Connect the antenna Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ? Tune in the station manually. ? Preset the stations (page 27). Refrnce stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? The remote control is not remote properly. sensor pointed at the ? of the DVD/CD Receiver. ? The remote control is too far from the ? There is ? DVD/CD Receiver. an Point the remote control at the remote sensor ft obstacle in the path of the of the DVD/CD Receiver. Use the remote control within about 23 (7 m). ? Remove the obstacle. are ? Replace panel ? Press DIMMER remote control and the DVD/CD Receiver. ? The batteries in the remote control flat. The front panel display is too dim. ? Nothing display. is displayed on the front the batteries with on new ones. the remote control. 31 Specifications Power Power Refer to main label Mass Genral External dimensions CD/ VD AM [MW] H x D) x 54 x 350 Laser Semiconductor PAL 35°C, Operation (1 kHz, NOP, (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 1.0 V output 87.5 108.0 MHz - or 65.0 74.0 - 60 dB 140 522 - Designs 87.5 108.0 MHz - (Mono) 1,620 kHz or 520 - 1,720 kHz 450 kHz 100W+100W(6Ωat1kHz,THD10%) Front: 100W + 100W (THD 10 %) (* Depending on the sound mode settings and the source, there may be no sound output.) Centre*: 100W Inputs Outputs AV Surround*: 100W + Subwoofer*: 200W 100W (4Ω at 1 kHz, THD Hz, THD 10 %) (6Ω at 30 IN, OPTICAL AUDIO S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 2 Speaker Centre Way 110 Speaker - Input Power Input Power (1m) 100 W 200 W H x D) 170X 1350 X 240mm Weight %) V) Passive Subwoofer 2 Way 3 Speaker (LHS-75TKW) 1 Way 6Ω 20,000 Hz 85 dB/W Rated x 3 1.0 speaker 10 (LHS-75TKC) 6Ω Sound Pressure Level (W - 10,000 Hz (LHS-75TKS) Suplied Acesori MHz, 1 10.7 MHz Stereo mode Net LPF/A-Filter) 0.5 % output Net Dimensions 20 kHz More than 70 dB Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Max. nm 140 Hz to 20 kHz Satellite Speakrs status: Horizontal 650 laser, wavelength 625/50, NTSC 525/60 More than 75 dB output Video mm 5°C to 5% to 85% Surround mode Amplifer kg 430 Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input Component FM x Temperature: S-video Video (W 3.9 Operating conditions Operating humidity Video Tuner Refer to main label supply consumption 15kg 110 - 20,000 Hz 85 dB/W 1 Speaker 4Ω (1m) 100 W 40 - 1,500 Hz 85 dB/W (1m) 200 W 200 W 400 W 500 X 150 X 170mm 260 X 375 X 400mm 6.1kg 11.8kg ?Speakers..........................6?Speakercables......................6 ?AMloopantenna.....................1?FMantenna.........................1 ?Remotecontrol......................1?Batteries(AAA).......................2 ?Videocable.........................1 and specifications P/N: 3834RH0135W are subject to change without notice. ">

Public link updated
The public link to your chat has been updated.
Advertisement