LG | LH-T755 | Owner's Manual | LG LH-T755 Owner's manual

LG LH-T755 Owner's manual
LH-T7634TF_NA1ULLA_ENG
Flat
Speaker
Home Theater
System
OWNER'S MANUAL
MODEL: LH-T755
(Main Unit:LH-T755
Speakers: LHS-76TFS, LHS-76TFC,
LHS-76TFW)
R
USB
Before
connecting, operating
or
repairing this product,
carefully and
read this instruction booklet
please
completely.
Call
us
and
we
will
guide you through
your first recording,
for free.
1-800-243-0000
FOR THE WARRANTY TERMS &
CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This
has been
designed and manufactured to assure personal safety. Improper use can result in electric
safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
product
shock
fire hazard. The
or
DO NOT REMOVE THE CABINET
COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
operating instructions
product is operated.
2.
use
All these
should be
these instructions.
Keep
and
-
The
-
safety
and
other. A
grounding type plug has two blades
grounding prong. The wide blade or
the third prong are
provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
read before the
and
safety, operating
instructions should be retained for future
a
third
obsolete outlet.
reference.
3. Heed all
and in
warnings.
the operating
-
All
warnings
on
the
product
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
instructions should be adhered
receptacles,
product.
and the
point
where
they
exit from
the
to.
4. Follow all
instructions.
-
All
and
operating
use
11.
instructions should be followed.
Only
use
attachments/accessories
specified by
the manufacturer.
5. Do
not use this product near water.
For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and other areas located near water.
6. Clean
--
only
with
dry
cloth.
from the wall outlet before
liquid
Unplug
cleaning.
--
this
product
Do not
use
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
12. Use
Slots and
are provided for
operation of the
product and to protect it from over- heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
openings
ventilation and to
installation
such
in the cabinet
ensure
as
a
or
rack
near
any heat
sources
such
as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9.
Do
not
polarized
plug has
2
defeat
or
the safety purpose of the
grounding-type plug. A polarized
two blades with
one
apparatus. When
caution
when
13.
Unplug
this
wider than the
a
moving
injury
combination to avoid
cart
the
from
is
used,
use
cart/product
tip-over.
product during lightning storms
long periods of time.
or
when unused for
unless
proper ventilation is provided or the manufacturer's
instructions have been adhered to.
8. Do not install
with
reliable
bookcase
only with the cart, stand, tripod, bracket, or
specified by the manufacturer, or sold
table
-
14. Refer
all
servicing to qualified service
personnel. Servicing is required when the
product has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
product, the product has been exposed to rain
or moisture, does not operate normally, or has
been dropped.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
CAUTION
CAUTION: TO REDUCE THE RISK
made.
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
REGULATORY INFORMATION: FCC Part 15
(OR BACK)
This
NO USER-SERVICEABLE PARTS INSIDE
PERSONNEL.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
shock to persons.
The exclamation
triangle
and, if
point
within
an
manual, may cause harmful interference to radio
However, there is no guarantee that
interference will not
does
in
occur
a
installation. If this
particular
harmful interference to radio
cause
which
reception,
can
be determined
or
by turning
the
off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
product
to the
presence of important operating and maintenance
(servicing) instructions in the literature
the
has been tested and found to
Class B
communications.
television
equilateral
user
a
not installed and used in accordance with the
instruction
product
is intended to alert the
accompanying
comply with
digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
product is operated in a residential installation. This product
generates, uses, and can radiate radio frequency energy
epuipment
the limits for
REFER SERVICING TO QUALIFIED SERVICE
?
Reorient
?
Increase the
product.
or
relocate the
separation
antenna.
receiving
between the
product
and
receiver.
Connect the
?
product
into
an
outlet
on a
circuit
different from that to which the receiver is connected.
Consult the dealer
?
technician for
experienced
or an
radio/TV
help.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
SERIAL NUMBER: The serial number is located
Slots and
of this unit. This number is
and to
openings
ensure
in the cabinet
reliable
operation
provided for ventilation
the product and to protect
are
of
it from
The
purchase.
Model No.
Serial No.
Most
a
KLASSE 1
LASER PRODUKT
LASER APPARAT
CLASSE 1
PRODUIT
is,
information
single
a
the Power Cord
recommend
be
they
placed
upon
circuit;
outlet circuit which powers only that
no additional outlets or branch
and has
circuits. Check the
LUOKAN 1 LASER LAITE
KLASS 1
concerning
appliances
appliance
LASER PRODUCT
requested
permanent record of your
___________________________________
dedicated
That
CLASS 1
as a
the back
___________________________________
CAUTION
the manufacturer's instruction have been adhered to.
guide
on
to this unit and not
available to others. You should record
here and retain this
over heating.
openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
unique
specification
page of this owner's
manual to be certain.
LASER
Do not overload wall outlets. Overloaded wall
loose
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
damaged
or
wall
outlets,
outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
could result in electric shock
CAUTION:
This
To
product employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
Use of
controls, adjustments
other than those
or the performance of
specified herein may result
fire.
Periodically
it, discontinue
replaced
with
use
an
unplug
appliance, and have the cord
replacement part by an
of the
exact
authorized servicer.
service center.
procedures
or
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
Protect the power cord from
in
hazardous radiation exposure.
prevent direct exposure to laser
To
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the
appliance.
CAUTION: The
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
(dripping
that the
as
vases,
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
plug
is
easily
accessible.
3
Introduction
Maintenance and Service
MaintenanceandService.................4
Beforeuse.............................5
FrontPanel/RearPanel...................6
RemoteControl.........................7
Installation and
TVConnections.........................8
Connections
.
.
.
.
.
.
.
.
.
.
.9
AntennaConnections....................9
and
a
chapter
before
service technician.
HANDLING THE UNIT
Setup
Optional Equipment
Refer to the information in this
contacting
to the
10
Assembling
Connecting
Speakers
.10
HowtoconnecttheSpeakers.
Tochangethestand....................10
.11
Tomountthespeakeronthewall.
SpeakerSystemConnection..............11
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
When
Please
.
.
the
carton and
original shipping
packing
at the
factory.
.
the exterior surfaces clean
Keeping
Do not
.13
Displaying Disc Information on-screen
InitialSettings.........................13
GeneralOperation......................13
Language...........................13
Display.............................13
.
save
the unit
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
HDMIConnection.......................12
.
shipping
.
near
volatile
use
liquids
such
as
insecticide spray
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
Audio..............................14
5.1SpeakerSetup.....................14
Lock(ParentalControl).................15
Others..............................15
Cleaning
To clean the
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Operation
Generalfeatures.......................16
Do not
Additionalfeatures.....................17
or
.18
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................18
ViewingaJPEGfile....................19
PlayingaDivXMoviefile.................20
unit.
.
.
.
.
.
DVDAudioDiscs.......................21
.22
PresettingtheRadioStations
ListeningtotheRadio...................22
SleepTimerSetting.....................23
.
.
.
.
.
.
.
.
.
.
.
strong solvents such
use
thinner,
as
Maintaining
Mute.................................23
UsingHeadphoneJack..................23
Selectinginputsource...................23
XTS/XTSpro...........................23
VIRTUALsound........................23
SoundMode...........................23
Controlling Your TV with
theSuppliedRemote....................24
REFERENCE
LanguageCodes.......................25
AreaCodes...........................25
Troubleshooting.....................26-27
Specifications.........................28
these
as
might damage
alcohol, benzine,
the surface of the
the Unit
The DVD/CD Receiver is
a high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
device. If the
.
Dimmer...............................23
4
the unit
are
dirty
or
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
use.
contact your nearest authorized
Introduction
Before
of
Types
use
Playable
Discs
DVD
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
(8cm/12cmdisc)
reference.
Audio CD
This manual
provides
information
on
the
operation
and maintenance of your DVD/CD Receiver. Should
require service, contact an authorized service
(8cm/12cmdisc)
In
addition, this unit
the unit
and CD-R
location.
WMA, JPEG
or
play
can
DVD-RW, DVD+RW,
titles, MP3,
a
CD-RW that contains audio
DivX files.
or
Notes:
About the
"
Symbol Display
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
specific
DVD video disc.
Used in this Manual
Symbol
Note:
Indicates
special
notes and
operating
features.
Code
Regional
This unit has
unit. This unit
Tip:
Indicates
tips
and hints for
making
the task easier.
as
the
Notes
A section whose title has
is
applicable only
symbol.
to the disc
of the
following symbols
represented by the
one
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
Codes
Most DVD discs have
numbers in it
"ALL".
clearly
a
globe
visible
on
number must match your DVD
code or the disc cannot play.
DVD and finalized DVD±R/RW
with
the
one or more
cover.
This
player's regional
DVD Audio discs
If you try to play a DVD with a different regional
code from your player, the message "Check
Audio CDs
Regional
Code" appears
on
the TV
screen.
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from
Digital
Theater
Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide
patents issued and pending. "DTS" and "DTS Digital
Surround"
Systems,
Systems,
are
Inc.
Inc.
registered trademarks of Digital Theater
Copyright 1996, 2003 Digital Theater
All Rights Reserved."
5
Front Panel/Rear Panel
PHONES connector
STANDBY/ON
DISC
FUNC./PLAY
Tray
Press and hold down this button about 3
STANDBY indicator
Lights
receiver is in
mode
OPEN/CLOSE button
red when the
seconds, then press repeatedly
to select
other function.
Standby
(off).
VOLUME controller
DISPLAY Window
Remote
sensor
USB Port
Connect to
a
USB
MONO/ST./
port of
(USB
memory
TUNING(-/+)/
SKIP( . bb/BB > )
P./STEP
memory device
etc.)
buttons
STOP
Power Cord
SPEAKER connectors
FM Antenna connector
L
AUDIO
R
AM
Loop
Antenna connectors
S-VIDEO OUT connector
Cooling
fan
HDMI OUT
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
wireless TX
(DC
7V
Connect to
OUT)
AV1 AUDIO
Connector
Do not touch the inner
Electrostatic
permanent damage
6
TV with Y Pb Pr
Input (L/R)/VIDEO
AV2 AUDIO
panel.
a
to the unit.
IN Connectors
Input (L/R)/VIDEO
pins of the jacks on
discharge may cause
the
rear
inputs.
IN Connectors
HDMI
output
providing
interface
a high
quality
for digital
audio and video.
AUX
Selects
DVD
output
To
BAND
Select the
System'
s
tuner
(FM
enjoy
Marks
0-9 numerical buttons
directly
select numbered
or
options
in
Displays
Selects
a
more
b/B/v/V
sound effect.
Selects
VIRTUAL
audio
an
Displays the disc's Title
menu
VOLUME
To
.
or removes
Program
menu.
MEMO.
Enter
forward.
playback.
radio station's
frequency
into the
CLEAR
Removes
a track number on the
program menu or a mark on the
MARKER SEARCH menu.
( . /> )
(x)
(X)
PLAY (B)
STOP
MUTE
ZOOM
SLEEP
PAUSE/STEP
REPEAT
Set the
all
Repeat chapter, track, title,
a
tuner.
REVERSE/FORWARD SKIP
ly
REPEAT A-B
Repeats
menu, if available.
(+/-)
adjust speaker volume.
Accesses
DVD disc.
Reverse/Forward slow
selection.
PROG.
SCAN/SLOW(bb/BB)
or
menu
TITLE
MENU
Search backward
the
TUN.(-/+) (b/B)
SETUP
menu on a
menu.
To tune in the desired radio station.
Selects the sound mode.
Accesses the
in the
Select programme of Radio.
language (DVD) or
(CD).
setup
option
an
display.
PRESET(-/+) (v/V)
audio channel
or removes
menu.
(left/right/up/down)
Acknowledges
SOUND
Accesses
setup
ENTER
AUDIO
an
language (DVD).
Accesses On-Screen
Selects the VIRTUAL sound
Selects
subtitle
DISPLAY
natural and realistic
enjoy great
a
Removes the
sound.
To
Introducin
menu.
RETURN
XTS pro
enjoy
MARKER SEARCH
SUBTITLE
menu.
To
point during playback.
a
SEARCH
service, programme number
a
the multimedia files.
MARKER
and AM
bands)
Select
input
tray.
source.
USB
(CD/DVD).
source
and closes the disc
Opens
POWER
Select the
(Z)
OPEN/CLOSE
Remote Control
at
a
System to turn
specified time.
off automatical-
RESOLUTION
sequence.
the resolution
your TV.
Changes
on
depending
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
DIMMER
Press to change brightness of the
display window on the front panel
in power-on status.
during
TV
To control the TV.
Remote Control
Remote Control
Operation Range
Point the Remote Control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
sensor
Angle:
About 30° in each direction in front of the remote
Remove the
the Remote
(See
page
battery
battery
24)
installation
cover on
the
Control, and insert
(size AAA) batteries
aligned correctly.
with
rear
of
two R03
and
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Installation and
Setup
TV Connections
Make
the
one
of the
following connections, depending
existing equipment.
on
of your
capabilities
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
Tips:
S-Video cable
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
the
(S).
Video connection
Connect the MONITOR OUT
from the DVD/CD
connections described below.
Receiver to the VIDEO IN
the TV
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
video cable
make the best connections.
Make
sure
directly
jack
jack on
using
the
supplied (V).
Component
Video
(Color
Stream
)
connection
Connect the COMPONENT VIDEO OUT
Caution:
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
protection system.
Rear of TV
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
S
Pb
V
Pr
C
L
AUDIO
R
Rear of DVD/CD Receiver
8
jack on the DVD/CD
jack on the TV using
the DVD/CD Receiver to the
on
the TV
using
an
Y Pb Pr
jacks from
corresponding in jacks
cable (C).
Note:
HDMI mode must be set to OFF for VIDEO OUT and
S-VIDEO OUT and
Component
video connections.
Antenna Connections
Optional Equipment
Connections
1. Connect
Connect the
VCR to the AV IN connectors.
a
2. Connect the USB
player, etc.)
to
supplied
FM/AM antenna for
listening
to
the radio.
port of USB Memory (or MP3
the USB port on the front of the unit.
Connect the AM
Loop
antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Rear of VCR
Front of DVD/CD Receiver
IN
Notes:
OUT
VIDE
To
AUDI
To AUDIO OUT
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
prevent noise pickup, keep the AM Loop antenna away
components.
from the DVD/CD Receiver and other
AUDIO
Be
(L/R)/
VIDEO OUT
To AV IN AUDIO
(L/R)/
VIDEO
to fully extend the FM wire antenna.
connecting the FM Wire antenna, keep
horizontal as possible.
sure
After
it
as
L
AUDIO
R
AM
FM Wire antenna
Loop
antenna
(supplied)
(supplied)
To Remove the USB Device from the unit
1. Choose
STOP
a
different function mode
twice in
(x)
or
InstaliodSeup
press the
a row.
L
AUDIO
2. Remove the USB from the unit.
R
Notes:
Don't extract the USB device while
Music files
DivX files
(MP3/WMA), image
can be played.
This unit
can
This unit
can
files
operating.
(JPEG) and
not format memory cards.
not use a USB HUB.
Recommended
Memory Cards.
(CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16, FAT32
Only use the memory cards recommended.
Devices which require additional program
Flash Card
Compact
-
-
installation when you have connected the unit to
computer
are
In
a
case
of
not
USB
HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive
supported. If there is an extention partition, it will
be supported.
If the USB device has two
folder is
move
to
a
supported.
displayed on
the previous
the
or more
drives,
a
are
not
drive
If you want to
after you select a
screen.
menu
folder, press RETURN.
Digital cameras
supported.
and mobile
phones
are
not
9
Assembling and Connecting
the Speakers
to
The
speakers are detached from the speaker stands.
Connect the speaker cables and assemble the front
and rear speakers from speaker stands as illustrated.
How to connect the
1.
Connect the
terminal
2.
3.
speaker
cables to the
appropriate
Fix the
speaker and the stand by inserting
(4 mm) in the speaker hole.
Close the holder
on
the stand.
cover
of the
Open
Remove the 2
3.
Remove the
4.
Remove the 4
cover
screws
speaker
of the
in the
speaker.
speaker
hole.
from the stand.
screws
from the round board.
5.
Remove the stand from the round board.
6.
Disconnect the connector cable between the stand
and round board.
Connect the connector cable between the desired
stand and round board.
speaker.
the 2
8.
9.
Set the desired stand
on
the round board.
Fix the desired stand and the round board with the
4
screws.
10. Follow
10
the stand
the holder
1.
7.
speaker
change
2.
the bottom of the round board.
Set the
screws
4.
on
Speakers
To
steps
2-4 of
"Assembling
the
Speakers".
To mount the
speaker
on
Speaker System Connections
the
wall
1.
Connect the SYSTEM to the SYSTEM CONNECTOR
For Front
or
Rear
from the stand
Speaker : Remove the speaker
(Follow steps 1-3 of "To change the
stand").
For Center
Speaker
:
Remove the 4
from
screws
For Front
speaker
or
Rear
Speakers
:Disconnect the
cable from the terminal
on
For Front
or
cable to the
the
4.
5.
For Front
6.
or
of the
For Front
of the
speakers using
the
supplied speaker
cables.
or
Speaker : Connect the speaker
appropriate terminal on the bottom of
or
the
Be
sure
to match the
appropriate
terminal
speaker
on
the
cable to the
components:
+
to
+
and
--to--.
Rear Speaker
speaker.
:
Rear
:
speaker
For Front
possible surround sound, adjust
speaker parameters (volume, distance, etc.).
Notes:
Rear
speaker.
cover
Connect the
the
Speaker, using
cable.
the bottom of
the round board.
3.
of the Active Subwoofer
To obtain the best
stand.
2.
rear
supplied System
Speaker
with the 2
Rear
Close the bottom
If the cables
are
reversed, the sound will be
distorted and will lack base.
Fix the bottom
cover
Speakers
:
If you
use
front
rating, adjust
screws.
Close the small
excessive
speakers
the volume
output
on
the
with low maximum
carefully to
speakers.
input
avoid
InstaliodSeup
cover.
7.
Fix the bracket
on
8.
Drive 2
in the wall for
screws
hook the
speaker
the
over
speaker using
the 2
speaker
screws.
and then
Front
speaker
(Left)
Front
speaker
(Right)
them.
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Center
speaker
Subwoofer
11
HDMI Connection
HDMI
If you have a HDMI TV or monitor, you can connect it
to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT
jack on
jack on a
Receiver to the HDMI
TV
or
monitor
2. Set the TV's
compatible TV
HDMI
the DVD/CD
HDMI
compatible
(H).
H
source
to HDMI
(refer
to TV's Owner's
manual).
3. In
stop mode, select HDMI mode by pressing
HDMI. Press RESOLUTION
the resolution you wish to
to select
repeatedly
change.
L
AUDIO
R
Notes:
The
the cable connector
arrow on
body
should
face up for correct alignment with the connector
the DVD/CD Receiver.
If HDMI cable is not
not
on
connected, the HDMI button is
operated.
Resolution
You
setting
change the resolution for the COMPONENT
VIDEO OUT by pressing RESOLUTION on the
Remote Control. Available resolution settings are as
can
shown below.
OUTPUT
Available Resolution
CONNECTION
If there is noise
or
lines
on
the screen,
NTSC
HDMI
1920
x
VIDEO OUT
1280
x
720
please
x
1080i
720p
480p
check the HDMI cable.
Not all
HDCP-compatible
DVI devices will work
with this DVD/CD Receiver.
If TV does not
on
Tip
the screen,
1920
x
1280
x
support HDCP, snow noise appears
or picture may vibrate or flicker.
MONITOR OUT
:
When you
resolution
pressing
HDMI
connection, you can change the
(480p, 720p, 1080i) for the HDMI output by
use
RESOLUTION
on
S-VIDEO
1080i
720p
480p
720
x
720
x
480i
720
x
480i
720
x
480i
the remote control.
Notes:
About HDMI
For
HDMI
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
(High
Definition Multimedia
Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or DVI-equipped
TV.
an
HDMI TV
while connection to
HDMI to DVI
enhanced,
or
a
requires an HDMI cable
DVI-equipped TV requires an
adaptor.
HDMI has the
displayed
and 1080i resolution
at the
capability
support standard,
high-definition video plus standard
to
audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and
between the AV
connectors),
source
and communication
and AV devices such
as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface
are
trademarks
licensing
LLC
or
registered
480p(NTSC)
and
on
the
component
resolution.
do not work with the
480p
(MONITOR
video connections
trademarks of
analog
OUT & S-VIDEO
OUT).
If you change the resolution, the display
(MP3/JPEG/DivX) size is changed.
to
multi-channel surround-sound
HDMI
720p
1080i, 720p,
Connection to
12
COMPONENT
VIDEO OUT
MENU
If your TV does not accept your resolution setting,
abnormal pictures may appear on the screen.
Please read TV's owner's manual then set the
resolution that your TV
can
accept.
Caution:
Changing
the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it
on
again.
Displaying
Disc Information
LANGUAGE
on-screen
You
loaded
LANGUAGE
various information about the disc
display
can
on-screen.
Press DISPLAY to show various
1.
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
Move
by pressing v / V and
setting by pressing b / B.
Select
item
select the
or
the disc
on
Current title
OSD
Select
(or track).
(or tracks).
language
a
for the
Setup
and
menu
on-screen
display.
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
Disc Audio / Subtitle / Menu
--
--
Subtitle
Angle
--
--
Sound
--
Selected subtitle.
Selected
angle/total
number of
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
angles.
Selected sound mode.
If
no
original language
the disc
was
Other
To select another
in which
InstaliodSeup
recorded.
language, press number
corresponding 4number
to
the
digit
according
language code list
on page 25. If you enter the wrong language code,
Note:
--
buttons then ENTER to enter the
button is
screen
Refers to the
--
track
pressed for a
display disappears.
few
seconds, the
on-
press CLEAR.
Initial
Settings
DISPLAY
the
make various
By using
Setup menu, you
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 13 to 15
To
display
can
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
A second press of
screen.
Move
To go to the next level:
Press B on the Remote Control.
TV
Aspect
4:3
To go back to the previous level:
Press b on the Remote Control.
Select
Select when
--
16:9
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
GENERAL OPERATION
Display
1.
Press SETUP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3.
Setup
menu
appears.
Use v / V to select the second desired
press B to move to the third level.
option
then
Display
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
or
PLAY to exit the
Setup
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
Panscan
on
4.
Mode
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
do not fit.
menu.
13
AUDIO
5.1
Each DVD disc has
variety of audio output options.
AUDIO options according to the
Set the receiver's
a
type of audio system you
Press ENTER and 5.1
On
Speaker
Front L
0ms
Sync
Size
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
With the DVD* 1
Control
(DRC)
format, you
can
hear
a
program's
soundtrack in the most accurate and realistic
thanks to
audio
3.
Adjust options using
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
Select
Dolby Digital only
Return
Use b / B to select the desired
4.
effect.
Move
2.
presentation possible,
digital
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
*1:
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
selection
Speaker
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
HD AV
a
can
Video
Since the
Sync
adjust delay time between
signal in milli-seconeds.
0→10→20→... →300
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
mix into normal stereo sound.
You
menu
On
Vocal
Dynamic Range
Speaker Setup
AUDIO
Select
Speaker Setup
DRC
HD AV
for the built-in 5.1 channel
appears.
AUDIO
5.1
following settings
surround decoder.
1.
use.
Speaker Setup
Make the
a
Audio
signal
and
change
speaker settings
settings.
fixed, you
are
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
Press b / B to
speaker. (You
same
time.
the Distance of the selected
adjust
adjust
can't
front / Woofer
speakers)
Test
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
14
speaker. Adjust
signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
whose standards
area
used to rate the DVD video
disc, based
on
were
the list
on
page 25.
1.
Select "Area Code"
on
the LOCK
menu
then
press B.
2.
Move
Follow
step
2
as
shown
Select
3.
Select the first character
Rating
Blocks
of rated DVDs based
playback
content. Not all discs
are
1. Select
the LOCK
"Rating"
on
on
previous paragraph
(Rating).
4.
their
using
v / V buttons.
Press B and select the second character
using
v / V buttons.
rated.
menu
5.
then
InstaliodSeup
Press ENTER to confirm your Area code selection.
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
Input password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
a
before
3. Select
pressing ENTER,
a
Rating
rating
Select
DivX(R) Registration
press CLEAR.
from 1 to 8
using
the v / V buttons.
Rating one (1) has the most
rating eight (8) is the least
1-8:
restrictions and
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
can
enter
change password.
or
1. Select Password
2. Follow
step
To
2
as
on
the LOCK
shown above
menu
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
1.
Select
2.
Press ENTER while "Select" is selected and the
videos from DivX
(Rating).
1.
Press SETUP to
2.
Input
the
display
or
rent the
VOD service at
download the video onto
a
disc for
playback
on
this unit.
3.
Press ENTER to exit.
Note:
menu.
All the downloaded videos from DivX
be
forget your password
If you forget your password,
following steps:
then press B.
www.divx.com/vod. Follow the instructions and
the
3. Press SETUP to exit the
"DivX(R) Registration" option
registration code will appear.
Use the registration code to purchase
then press B.
change
password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Press ENTER. Input a new
password and press ENTER.Enter it again and
press ENTER to verify.
If you
DivX(R) Registration
We
information, visit www.divx.com/vod.
Password
You
Select
Move
restrictive.
you
the
can
clear it
Setup
using
played
back
on
VOD
can
only
this unit.
the
menu.
6-digit number "210499" and
password is cleared.
press
ENTER. The
15
Operation
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
During playback,
Press X
SKIP
Discs
Operations
/
>)
tray.
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc : 4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
press REPEAT
mode.
During playback,
desired
repeat
DVD Video discs:
Audio
A-B
repeatedly
to select
a
Chapter/Title/Off
CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
SLOW
Pause
mode, press SLOW (m
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16)
16
or
or
T
M)
to hear
a
to select the
(1/2, 1/4, 1/8, 1/16)
a
Notes
general features:
on
Last Scene
If you press SKIP
(>) once during Repeat
Chapter (Track) playback, the repeat playback
This receiver memorizes last
that is viewed. The last
The A-B
on some
scene
from the last disc
remains in memory
the disc from the receiver or
cancels.
Zoom may not work
Memory
scene
even if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
DVDs.
repeat function is available only in the
current track.
Note:
This receiver does not memorize the
Additional features
switch off the receiver before
scene
commencing
of
to
a
disc if you
the disc.
play
Time Search
To start
at any chosen time
playing
on
the disc:
1.
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
"--:--:--" appears.
3.
Input
the
required
start time in
hours, minutes, and
seconds from left to
right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
Press ENTER to confirm.
4.
Playback
starts from the
selected time.
Marker Search
To enter
You
Marker
a
start
can
playback
To enter
points.
desired
point
the TV
screen
on
from up to nine memorized
at the
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
1.
During
disc
search
menu
2.
Clear
a
Marked Scene
playback,
appears
press SEARCH. The marker
on the screen.
Within 10
seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
3.
marked
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
can play any marker by
the marker search menu.
inputting
its number
Screen Saver
The
Stop
appears when you leave the unit in
mode for about five minutes.
screen saver
17
Playing
This unit
an
Audio CD
Audio CDs
play
can
or
or
MP3/WMA file
MP3/WMA files
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
recorded media.
program
MP3/ WMA/ Audio CD
Once you insert
Audio
MP3/WMA files recorded media
an
or
appears on the TV screen.
Press v / V to select a track/file then press PLAY or
ENTER and playback starts. You can use variable
CD,
playback
Programmed Playback
1.
2.
0:00:00
Select
a
track
"
on
the
"List", then press PROG.
or
(Add)"
additional tracks
place
JPEG
List
disc.
icon then press ENTER to place
the selected track on the "Program" list. Repeat to
1/104
MP3
Program
List
a
select
1/12
Audio CD
Insert
contain 300 tracks.
Audio CD and MP3/WMA Discs:
a menu
functions. Refer to page 16.
0:00:00
can
on
the list.
Program
Track1
Music Folder 1
Track2
Music Folder 2
Note:
Track3
Music Folder 3
Track4
Music Folder 4
Track5
Music Folder 5
Track6
You
Music Folder 6
Track7
Track8
Music Folder 8
add all tracks in the disc. Select
Tips:
Press MENU to
move
to the next page.
PHOTO word
top of the
on
menu
MP3 / WMA disc
as
is
4.
Press PLAY
?
?
player
is
5.
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA)
-
-
-
CD-R
a
file extension other than
physical
an
to
".mp3"
/ ".wma".
1.
format should be ISO 9660
2.
playback MP3 / WMA files.We recommend
Easy-CD Creator, which creates an ISO
File
should have
must
incorporate
?
They
should not contain
?
The total number of files
a
played
once.
resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
.mp3 or .wma extension.
special letters such as
/ ?
playing
Press REPEAT to select
?
"
*
:
a
disc. The
a
desired
Off(No display):
a
does not
Track from
play repeatedly.
"Program"
List
Use vVto select the track that you wish to
Program list.
999.
2.
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that
permission
is
required
the
18
copyright
owner.
erase
"
Press CLEAR.
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
in
order to download MP3 / WMA files and music from
the Internet. Our company has no right to
permission. Permission should always be
repeat mode.
repeats the current track
ALL: repeats all the tracks on programmed list.
from the
the disc should be less than
requires
repeat
TRACK:
Erasing
1.
on
Tracks
Press REPEAT when
?
maximum of 8 letters and
<>letc.
This DVD/CD Receiver
in
To
?
?
an
Playback begins
icon appears.
that you use
9660 file system.
names
list have
Repeat Programmed
MP3/WMA file
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible
ENTER to start.
-
The DVD/CD Receiver cannot read
that has
?
with this
or
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
highlighted.
follows:
within 24
?
compatibility
icon
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
"Program"
?
( Add All)"
page.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
limited
"
then press ENTER.
3.
On
can
Music Folder 7
grant such
sought from
Note:
The programs
are
also cleared when the disc is removed.
Viewing
a
JPEG file
JPEG
JPEG disc
limited
with this
player
is
This unit
Before
JPEG
can play discs with JPEG files.
playing JPEG recordings, read the
Recordings on right.
compatibility
follows:
as
Insert
1.
disc and close the
a
The PHOTO
menu
notes
on
?
see an on-screen
the TV
on
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
PHOTO
as
Preview
List
upon the size and number of JPEG
a long time for the DVD/CD
Receiver to read the disc's contents. If you don't
display after several minutes,
tray.
appears
Depending
files, it could take
---
2760
x
2048
pixels
and burn another disc.
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
The total number of files and folders
on
the disc
should be less than 999.
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
?
JPEG Folder 8
?
Press v / V to select
2.
folder, and press ENTER.
a
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder
previous
remote to
list,
use
the v / V buttons
on
?
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
3.
viewing a file, you can press STOP
previous menu (JPEG menu).
to
move
to the
Ensure that all the selected files have the
extensions when
the
and press ENTER.
highlight
Some discs may be incompatible due to a
different recording format or the condition of disc.
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
or
as
into the CD
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
shown
as
JPEG
image
files in
Explorer.
Tips:
There
four Slide
:
Speed options
(Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b /
select the option you want to use then press ENTER.
>
are
(Slow),
If you set
>>
Speed option
Off, Slide is
to
B to
not active.
Slide Show
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER.
Still Picture
1.
Press PAUSE/STEP
Operation
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
Moving
(.
or
>)
once
to advance to the next
To rotate
press
while
or
viewing a
previous file.
picture
Press b / B
picture
or
to another File
Press SKIP
picture
show, press PLAY
again.
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
19
Playing
DivX Movie file
a
DivX disc
this DVD/CD Receiver you
Using
play
can
compatibility
with this
player
is limited
follows:
as
DivX disc.
?Available resolution size of the DivX file is under
Insert
1.
a
appears
disc and close the
on
the TV
tray. The MOVIE
menu
800x600
screen.
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
45 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 2
Movie Folder 3
Movie Folder 4
"
"
_
display.
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the
screen
frame is
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
the remote to
on
interleaved, either video
or
audio is
outputted.
and
highlight
If the video and audio structure of recorded
file is not
press ENTER.
Playable
If you want to view a particular file, press
v / V to highlight a file and press ENTER
3.
?
or
switch
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
is
Playable
?
Tips:
Press MENU to
On
move
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
CD with
highlighted.
?
Be
sure
to select "SUBTITLE ON" mode
subtitle file every time before
When the subtile has
original
subtile is
only
more
playing
than two
can
during
not
adjust
the DivX file
Notice for
languages
the
.
in the
file,
can
not be
played.
sound mode and VIRTUAL sound
playing.
displaying
If the subtitle does not
the Divx subtitle
display properly during playback,
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
displayed properly
Playable
"AC3
?
available.
The DivX files in your memory card
You
by pressing
DivX file
a
Codec format
"DIVX3.xx
"MP43
Notes:
20
DivX file
", ".mpg ", ".mpeg ", ".divx"
PLAY.
Press STOP to exit.
4.
is
".avi
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Audio format
", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
within 24
?
-
-
-
DVD Audio Discs
DVD Audio is
success
disc format
building
provide high quality,
a new
of DVD to
Moving
multi-channel audio for
on
Some DVD Audio discs divide content into different
the
uncompressed,
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
a new
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
the disc itself.
DVD Audio
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
to another GROUP
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
used for
music, either Advanced Resolution multi-
quality that is closer to the artist's
recording or for longer recordings. Many DVD
on-screen
text, such
as
a
or
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
Note:
channel sound
Audio discs contain
Press 1/2
3.
on
Sometimes the author of the disc creates hidden
DVD Audio disc contains up to seven times
capacity of a CD. This additional space is
master
Group
can
the data
typical
during playback
artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
content that
can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
control isn't dictated by your DVD/CD Receiver
it is
---
a
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Note:
To
enjoy
of DVD
maximum sound
Audio, you
must
quality
use
output (5.1CH AUDIO OUT jacks
Receiver).
and surround effect
5.1 channel
on
analog
audio
the DVD/CD
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Operation
Note:
Since the
of the
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
some
on-screen
available
21
the Radio Stations
Presetting
You
can
Before
preset
50 stations for FM and AM
make
tuning,
sure
Preset radio stations in the DVD/CD Receiver's
(MW).
that you have turned down
the volume.
AM
(MW)
on
the Remote Control until FM
appears in the
or
display
Press and hold
about two seconds
until the
starts to
TUN.(-/+) for
frequency indication
Scanning stops
when the DVD/CD Receiver tunes in
a
or
AM
(MW)
repeatedly
Control to select the
appears in the
on
the Remote
preset station you
want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
change,
station.
3.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
Remote Control repeatedly.
-
Press PROG/MEMO
A
the
window.
Press PRESET +/-
2.
then release.
4.
on
The last received station is tuned in.
BAND, FM and AM
(MW) changes alternately.
3.
radio stations"
(see "Presetting
Press BAND until FM
1.
window.
display
And then every time you press
2.
memory first
left).
Press BAND
1.
to the Radio
Listening
on
the Remote Control.
To turn off the radio
preset number will flash in the display window.
Press POWER to turn the DVD/CD Receiver off
Press PRESET +/-
5.
select the
on
preset number you
Press PROG/MEMO
6.
the Remote Control to
on
select another function mode
want.
the Remote Control
again.
7.
Repeat steps
To listen to
non-preset radio stations
Use manual
The station is stored.
or
For manual
3 to 6 to store other stations.
a
station with
Press
TUN.(-/+) repeatedly
station manually.
a
in
weak
step
signal
Press and hold PROG/MEMO for about two seconds
in the
again,
display
window
the stations
are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
change
to normal mode.
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
above.
22
the
TUN.(-/+) repeatedly.
tuning,
the number buttons
press 1 then 9
preset number, follow the steps
a
5-6
as
on
the Remote
a
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
in the
effect, but
the button
Note:
already
2.
preset radio station directly.
For example, to listen to preset station 4, press 4 on
the Remote Control. To listen to preset station 19,
To
If all stations have
step
preset radio station directly
a
can use
Control to select
To clear all the stored stations
appeared
in
3 to tune in the
To select
and then press PROG/MEMO
cleared.
press
tuning
press and hold TUN.(-/+) for
about two seconds on the front panel.
You
and "ERASE ALL" is
automatic
tuning,
For automatic
To tune in
or
(DVD/CD, AUX, USB).
again
seconds).
noisy
panel so that "ST."
display window. There will be no
the reception will improve. Press
on
the front
to restore the stereo effect.
improve reception
Reorient the supplied antennas.
Timer
Sleep
You
can
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
at
automatically
specified
a
The SLEEP indicator and
sleep
changes
in the
following
The
order.
When
playing the movie with the
relatively to the general music, it
can
check the time
remaining
before the DVD/CD
sense
Receiver turns off.
Press SLEEP. The
remaining
Press the DIMMER
mute your unit in
Connect a stereo headphone
PHONES connector.
can use
VCRs
or
plug ( 3.5mm)
into the
the
supplied
operation.
Press AUX
select the
repeatedly on the Remote
desired input source.
with the unit
(L/R)
for
selecting
the
can
analog signal
from AV1/2 AUDIO
input source by pressing
front panel.
Press and hold down this button about 3
then press
repeatedly
Multichannel sound
to select
input
seconds,
a
5.1 ch feel 10.1
provides
a
emotion
can
Sound Mode
the
also select the
the
VIRTUAL
which you are involved with sound and you
feel detailed sound.
one
on
5.1 ch
ch sound therefore this mode
You
& VIDEO IN Connectors.
FUNC. button
Effect
3D STEREO
The Multichannel sound makes
Note:
You
Display
VIRTUAL
Multichannel sound
Control to
Each time you press this button, the mode of the
function changes in the following sequence:
:
Source
2.1 ch.
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
when
other units connected to the AV
on
VIRTUAL sound.
3D STEREO
source
IN. Refer to the owner's manual
for further information
setting
Jack
speakers are automatically disconnected
plug in a headphone (not supplied).
Selecting input
IN
it
to
the telephone, "MUTE" indicator flashes in the
window.
AV 1/2
changing
changing
to 2.1 CH.
press VIRTUAL the
order, for example,
Using Headphone
You
disabled when
VIRTUAL sound
Press MUTE to mute your unit.
you
temporarily
from 2.1 CH to 5.1 CH and it is enabled when
repeatedly.
Mute
The
via the
Note:
The XTS mode is
This function will change the brightness of the display
window on the front panel during in power-on status.
display
of sound at woofer for you to satisfy with.
BYPASS, It creates the high
display effect by playing the sound source
rear speakers same as the front speakers.
window.
can
weak bass sound
enforces the
In the mode of 2 CH
time appears in the
Dimmer
answer
unique
XTSON
Note:
You
XTS-P ON...
creates the
30→20→10→OFF
display
→
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
SLEEP180→150→120→90→80→70→60→50→40→
You
NORMAL
→
XTS-P ON
Each time you press SLEEP the
2.
XTS ON
window.
display
in
time.
time appears in the
sleep
setting changes
the
Press SLEEP to set the desired
1.
Each time you press XTS pro the
following order.
time.
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to. (2 ch. sound only)
can
of the
BYPASS
ON STAGE
STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX →BYPASS...
→
→
→
→
→
→
→
→
HALL
→
source.
Note:
Initial sound mode is BYPASS
23
Controlling
You
can
Your TV with the
control the sound
source, and
remote.
level, input
power switch of your LG TV with the
Code numbers of controllable TVs
supplied
If
You
can
control your TV
using
Remote
Supplied
the buttons below.
more
them
than
one
at
code number is
one
a
listed, try entering
time until you find the
one
that works
with your TV.
Manufacturer
Code Number
Manufacturer
Code Number
ADMIRAL
16,33,37,44,45
MONTGOMERY
01,06,08,09
AIWA
70
WARD
23,24,32,33,34
AKAI
01
NEC
01,08
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
43
BELL & HOWELL
33
PANASONIC
07,11,13,25,35,36
BROKSONIC
18,19
PHILCO
01,06,07,08,09,
CANDLE
51
CCE
07
PHILIPS
06,07,43,61,62,65
CENTURION
08
PIONEER
30
CINERAL
43
PORTLAND
09
CITIZEN
49,50,51,52,53,54,55
PROSCAN
03,37,44
CORONADO
09
QUASAR
11,13
CROWN
09
RADIO SHACK
16,17,23
01,03,37,44,69
CURTIS MATHES
TV Control
Buttons
01,03,08,33,35,37,44
RCA
DAEWOO
16,17,23
DAYTRON
16,38,39,40,41,42,43
REALISTIC
01,08
SAMPO
08
EMERSON
01,09,16,17,18,19
SAMSUNG
01,08,09,25,68
FISHER
28,29
SANYO
28,29
FUNAI
46,47
SCOTT
01,08
09,25,26,27,28,29
GENERAL ELECTRIC
By pressing
You
POWER
Turn the TV
CHANNEL(v / V)
can
on or
off.
Scans up or down through
memorized channels.
VOLUME +/--
Adjust
TV INPUT
Switch the TV's
source
between the TV and other
input
sources.
MUTE
Turns
03,10,11,13,37,44
SEARS
GRADIENTE
01,56,57,63,67
SEMP
64
HITACHI
09,14,15,43
SHARP
09,22,23,24,60,66
JC PENNEY
01,08,10,27,35
SIGNATURE 2000
01,06,08,09,10,
JVC
20,21,63,67
KIOTE
43
SONY
12,62
KMC
09
SOUNDESIGN
51
KTV
01,08,09,31
SYLVANIA
01,04,05,06,07,
LG
01,07,08,09,35,39,40
(GOLDSTAR)
08,35,51
33
SYMPHONIC
LOGIK
33
TATUNG
11
LXI
09,24,25,26,27,28,29
TEKNIKA
07,09,16,33,51
MAGNAVOX
01,02,04,05,06,
TELERENT
09,33
07,08,09,20,
THOMSON
69
34,35,43,51,61,62,65
YORX
08
MAJESTIC
46,47
33
TOSHIBA
01,25,26,27,64
MARANTZ
01,32
WARDS
01,06,08,09,10,33,34
MEMOREX
33
XR1000
48
01,08,32,34
ZENITH
01, 02,33,59
MGA/MITSUBISHI
on or
23,24,33,34
LODGENET
the volume of the TV.
input
15,38,43,58
off TV sound.
Notes:
Note:
Depending
on
the unit
be able to control
Controlling
You
can
being connected, you
your TV using some of the
may not
buttons.
other TVs with the remote
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
While
button, press the
holding
number buttons to select the manufacturer code
for your TV
2.
24
down TV POWER
(Refer
to table
on
Release TV POWER button.
the
right column).
on
not function
your TV,
the TV,
on
some or
even
all buttons may
entering the
after
correct manufacturer code.
If you enter a new code number, the code number
entered will be erased.
previously
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
again.
manufacturer code.
1.
Depending
setting.
Set the
appropriate
code number
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
25
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
securely
Insert
that the DVD or,
is
?
picture.
a
disc.
(Check
into the
audio CD indicator in the DVD
does not work.
No
service.
The TV is not set to receive DVD
signal
?
Select the
mode
output.
display
lit.)
appropriate
the TV
on
so
video
the
input
picture from
the DVD/CD Receiver appears
TV screen.
?
The video cable is not connected
?
no
sound
or
The connected TV power is turned off.
?T urn
?
The
?
a
connected with the
equipment
not connected
are
?
is
does not start
input
mode of the
so
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
?T urn
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting cable
is
damaged.
dirty.
poor.
The DVD/CD Receiver
Select the correct
jacks securely.
securely.
?
playback picture
the TV.
you can hear the
sound from the DVD/CD Receiver.
signal output.
The audio cables
on
audio receiver
audio cable is not set to receive DVD
?
The
Connect the video cable into the
?
very low-level
sound is heard.
only
on
the
equipment
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
is
?
An
the
jacks securely.
securely.
There is
on
unplayable
disc is inserted.
?
or
display
lit.)
Insert
disc
a
playable
disc.
the
(Check
type, colour system and Regional
code.)
?
?
The disc is
placed upside
The disc is not
placed
?
down.
Place the disc with the
within the
guide.
?
Place the disc
The disc is
?Amenu is
?
dirty.
on
the TV
?
screen.
The
Rating
level is set.
?
heard.
or
noise is
?
The disc is
?
The
?
dirty.
speakers and components
poorly.
are
?
The DVD/CD Receiver is located too
close to the TV.
26
tray
guide.
menu screen.
Cancel the
rating
Rating
function
or
change
level.
Clean the disc.
Connect the
speakers
and
components securely.
connected
?
the disc
Press the SETUP button to turn off
the
Loud hum
side
Clean the disc.
the
?
on
inside the
correctly
?
playback
down.
?
Move your TV away from the audio
components.
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?T une in the station
?
Preset the stations
manually.
(page 22).
stations have been cleared
(when
tuning by scanning preset stations).
The Remote Control
?
properly.
The Remote Control is not
remote
does not work
?
sensor
pointed
at the
?
of the DVD/CD Receiver.
The Remote Control is too far from the
?
DVD/CD Receiver.
?
There is
an
Point the Remote Control at the remote
sensor
Use the Remote Control within about 23
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(7 m).
?
Remove the obstacle.
?
Replace
?
Press DIMMER
Remote Control and the DVD/CD
Receiver.
?
The batteries in the Remote Control
are
flat.
The front
display
panel
is too dim.
?
Nothing
display.
is
displayed
on
the front
panel
the batteries with
on
new ones.
the Remote Control.
27
Specifications
Power
Genral
Refer to main label
Net
3.9
kg
430
x
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
AM
[MW]
Amplifer
295
mm
5°C to
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
NTSC 525/60
35°C, Operation
laser, wavelength
NOP -6
(1 kHz,
output
87.5
-
x
1
1
108.0 MHz
10.7 MHz
60 dB
140
520
(Mono)
8,000 Hz
-
1,720 kHz
-
450 kHz
100W
Surround mode
Front: 100W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Surround*: 100W
100W
+
(Rated Output Power 100W, 6Ω at 1 kHz, THD 10 %)
100W (Rated Output Power 100W, THD 10 %)
+
Centre*: 100W
+
100W
Subwoofer*: 200W
(Rated Output Power 100W, 6Ω at 1 kHz, THD 10 %)
(Rated Output Power 150W, 3Ω at 30 Hz, THD 10 %)
AV IN
Inputs
Outputs
S-VIDEO, MONITOR, PHONES: (32 Ω,
Type
Impedance
Frequency Response
2
Speaker
Centre
Way
180
Input Power
Input Power
-
H
x
D)
subject
to
V)
Subwoofer
speaker
(LHS-76TFC)
2
Way
5
Speaker
(LHS-76TFW)
1
Way
20,000 Hz
(1m)
180
-
20,000 Hz
83 dB/W
1
Speaker
3Ω
(1m)
100 W
50
-
1,500 Hz
82 dB/W
(1m)
200 W
200 W
200 W
400 W
280x1298x280mm
500x170x70mm
235x400x365mm
5.2kg
1.8kg
9.8kg
Weight
are
1.0
6Ω
100 W
x
specifications
Speaker
83 dB/W
Rated
(W
5
6Ω
Sound Pressure Level
and
LPF/A-Filter)
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x 2
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1
(LHS-76TFS)
Designs
20 kHz
1.0 V
Stereo mode
Net
dB,
0.5 %
output
Net Dimensions
nm
More than 70 dB
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Max.
650
150 Hz to 18 kHz
More than 75 dB
Satellite
Speakrs
status: Horizontal
5% to 85%
COMPONENT VIDEO OUT
FM
x
Temperature:
S-video
Video
57
Operating
Operating humidity
Video
Tuner
Refer to main label
supply
consumption
Weight
Power
change
without notice.
This LG Electronics
repaired or replaced, at LG's option, if it proves to be defective in material or
workmanship,
during the warranty period ("Warranty Period") listed below, effective from the date
of
of
consumer
("Date
Purchase")
original
purchase of the product. This warranty is good only to the original
of
the
and
effective
purchaser
product
only when used in the United States, excluding U.S. Territories.
product,
will be
under normal use,
WARRANTY PERIOD:
LABOR: 90
days
HOW SERVICE IS HANDLED:
from the Date of Purchase.
Call 1-800-243-0000 for instructions
defective unit
PARTS: One Year from the Date of Purchase.
repaired
or
Parts
of the
replaced are warranted for
original warranty period.
the
remaining portion
the
receipt and your box
repair or replacement.
to
Shipping both ways will be paid by LG during the first 90
days of the Warranty Period. During the remainder of the
Warranty Period (91-365days), you pay inbound shipping
charges and LG pays return shipping charges.
Visit
THIS WARRANTY IS IN LIEU OF ANY OTHER
getting
Please retain dated sales
return the unit to LG for
*
on
replaced.
our
website at:
http://www.lgservice.com
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY
LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
DAMAGES OF ANY
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE
WHETHER BASED IN
CONTRACT, TORT OR OTHERWISE. Some
consequential damages
warranty gives
you. This
or
limitation
you
how
states do not allow the exclusion
the above exclusion
long
implied warranty lasts,
specific legal rights and you may also have other rights
on
an
so
or
or
limitation of incidental
limitation may not
apply
or
to
that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
?
Damages
or
operating problems
maintenance
?
or
failure to
that result from
maintain,
or
shipping, installation, adjustment of
separate system components; and
user
controls, calibration,
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the
cost of
repair
or
replacement
of such defective
product
shall be borne
by
the
consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service
Product
Assistance,
or
Center, Where
Customer Assistance
to
buy,
Call 1-800-243-0000
and select
Or visit
LG ELECTRONICS
U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD
CLIFFS, NJ
our
(24 hours a day, 365 days per year)
appropriate options from the menu.
website at
http://www.lgservice.com
P/N
:
3834RT0017C
Issue O
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising