advertisement
▼
Scroll to page 2
of 29
LH-T9654MB_NA1ULLA_ENG DVD RECEIVER OWNER'S MANUAL MODEL: LH-T9654MB (Main Unit: LH-T9654 Speakers: LHS-96MBF, LHS-96MBC, LHS-96SBS, LHS-96SBW) R USB Before connecting, operating or repairing this product, carefully and read this instruction booklet please completely. Call us and we will guide you through your first recording, for free. 1-800-243-0000 FOR THE WARRANTY TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL. IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This has been designed and manufactured to assure personal safety. Improper use can result in electric safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user. product shock fire hazard. The or DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. operating instructions product is operated. 2. All these should be these instructions. Keep and - The - safety and other. A grounding type plug has two blades grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the read before the and safety, operating instructions should be retained for future use a third obsolete outlet. reference. 3. Heed all and in warnings. the operating - All warnings on the product 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience instructions should be adhered receptacles, product. 4. Follow all instructions. - All and operating use 11. instructions should be followed. 5. Do not 6. Clean they exit from only liquid Only use attachments/accessories specified by For apparatus near water. tub, wash bowl, kitchen sink, wet basement; or near a swimming -- with dry located cloth. from the wall outlet before near water. Unplug cleaning. -- this product Do not use cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 12. Use Slots and are provided for operation of the product and to protect it from over- heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in openings ventilation and to installation such in the cabinet ensure as a or rack near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. not polarized plug has defeat or the safety purpose of the grounding-type plug. A polarized two blades with one apparatus. When caution when combination to 13. Unplug this wider than the a moving avoid injury cart the from is used, use cart/product tip-over. product during lightning storms long periods of time. or when unused for unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 8. Do not install with reliable bookcase only with the cart, stand, tripod, bracket, or specified by the manufacturer, or sold table - 2 where bath example: laundry tub, in a pool; and other areas Do point the manufacturer. this use near a 9. and the the to. 14. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is CAUTION CAUTION: TO REDUCE THE RISK made. OF ELECTRIC SHOCK DO NOT REMOVE COVER REGULATORY INFORMATION: FCC Part 15 (OR BACK) This NO USER-SERVICEABLE PARTS INSIDE comply with digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy epuipment the limits for REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric an shock to persons. and, if not installed and used in accordance with the instruction triangle interference will not point within an is intended to alert the equilateral does user television to the the Reorient ? Increase the over can be determined or by turning the relocate the separation antenna. receiving between the product and product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer ? it from or Connect the ? CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. openings installation. If this particular a receiver. HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN ensure which reception, ? product. OR MOISTURE. Slots and in harmful interference to radio off and on, the user is encouraged to try to correct the interference by one or more of the following measures: WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK and to occur cause product presence of important operating and maintenance (servicing) instructions in the literature accompanying manual, may cause harmful interference to radio However, there is no guarantee that communications. product The exclamation has been tested and found to Class B a in the cabinet reliable operation are of the provided for ventilation product and to protect heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. technician for CAUTION Most a concerning appliances dedicated That is, experienced radio/TV the Power Cord recommend they be placed upon circuit; single a or an help. outlet circuit which powers only that no additional outlets or branch and has appliance circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall CLASS 1 KLASSE 1 loose LASER PRODUCT LASER PRODUKT LASER APPARAT CLASSE 1 PRODUIT wall outlets, outlets, extension cords, power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions frayed LUOKAN 1 LASER LAITE KLASS 1 damaged or LASER could result in electric shock CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. it, discontinue replaced CAUTION: This product employs a System. product, please ensure proper use of this read this owner's manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized controls, adjustments procedures other than those performance of specified herein may result or Periodically with use an unplug appliance, and have the cord replacement part by an of the exact Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in service center. Use of fire. authorized servicer. Laser To or examine the cord of your appliance, and if its appearance indicates damage or deterioration, a door, plugs, the in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. or wall exits the walked upon. Pay particular attention to outlets, and the point where the cord appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. CAUTION: The (dripping as vases, apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or 3 Introduction Maintenance and Service MaintenanceandService.................4 Beforeuse.............................5 FrontPanel/RearPanel...................6 RemoteControl.........................7 Installation and a chapter before service technician. HANDLING THE UNIT Setup TVConnections.........................8 Optional Equipment Refer to the information in this contacting Connections . . . . . . . . . . .9 When shipping AntennaConnections....................9 Please Assembling and Connecting to the Speakers 10 SpeakerSystemConnection..............10 materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed HDMIConnection.......................11 at the .12 Displaying Disc Information on-screen InitialSettings.........................12 GeneralOperation......................12 Language...........................12 Display.............................13 . . . . save the the unit carton and original shipping packing factory. . the exterior surfaces clean Keeping Do not near volatile use liquids such as insecticide spray the unit. Do not leave rubber Audio..............................14 5.1SpeakerSetup.....................14 Lock(ParentalControl).................15 or plastic products in contact long period of time. since they with the unit for a leave marks the surface. on Others..............................15 Cleaning Operation Generalfeatures.......................16 Additionalfeatures.....................17 .18 Playing an Audio CD or MP3/WMA file ProgrammedPlayback..................18 ViewingaJPEGfile....................19 PlayingaDivXMoviefile.................20 . . . . the unit To clean the surfaces player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened . Do not or strong solvents such use thinner, as these as might damage alcohol, benzine, the surface of the unit. DVDAudioDiscs.......................21 .22 PresettingtheRadioStations ListeningtotheRadio...................22 SleepTimerSetting.....................23 . . . . . . . . . . . . Dimmer...............................23 Mute.................................23 UsingHeadphoneJack..................23 Selectinginputsource...................23 XTS/XTSpro...........................23 VIRTUALsound........................23 SoundMode...........................23 Controlling Your TV with theSuppliedRemoteControl. . . . . . . . . . . .24 REFERENCE AreaCodes...........................25 Troubleshooting.....................26-27 Specifications.........................28 the Unit The DVD/CD Receiver is a high-tech, precision optical pick-up lens and disc drive parts worn, the picture quality could be device. If the are dirty or diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For . LanguageCodes.......................25 4 Maintaining details, please service center. use. contact your nearest authorized Introduction Before of Types use Playable Discs DVD To ensure proper use of this product, please read this owner's manual carefully and retain for future (8cm/12cmdisc) reference. Audio CD This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should require service, contact an authorized service the unit location. (8cm/12cmdisc) In addition, this unit can play a DVD-RW(video mode), DVD+RW, and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. Notes: About the " Symbol Display " Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions. may appear your TV display during and indicates that the function explained in operation on this owner's manual is not available on that specific DVD video disc. Used in this Manual Symbol Note: Indicates special notes and operating features. Code Regional This unit has unit. This unit Tip: Indicates tips and hints for making the task easier. as the Notes A section whose title has is applicable only symbol. to the disc of the following symbols represented by the one rear on a regional code printed on the rear of the play only DVD discs labelled same can of the unit Regional or Codes Most DVD discs have numbers in it "ALL". clearly a globe visible on number must match your DVD code or the disc cannot play. DVD and finalized DVD±R/RW with the one or more cover. This player's regional DVD Audio discs If you try to play a DVD with a different regional code from your player, the message "Check Audio CDs Regional Code" appears on the TV screen. MP3 Discs WMA Discs JPEG Discs DivX Discs Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital Surround" Systems, Systems, are Inc. Inc. registered trademarks of Digital Theater Copyright 1996, 2003 Digital Theater All Rights Reserved." 5 Front Panel/Rear Panel PHONES connector STANDBY/ON DISC FUNC./PLAY Tray Press and hold down this button about 3 STANDBY indicator OPEN/CLOSE button red when the Lights receiver is in mode seconds, then press repeatedly to select other function. Standby (off). VOLUME controller DISPLAY Window Remote sensor USB Port Connect the USB a MONO/ST./ port of (USB memory TUNING(-/+)/ SKIP(.bb/BB>) P./STEP memory device etc.) buttons STOP Power Cord SPEAKER connectors FM Antenna connector OPTICAL IN connector L AUDIO R AM Cooling fan Loop Antenna connectors S-VIDEO OUT connector (DC 7V OUT) Connector Connect HDMI OUT HDMI MONITOR OUT connector TRANSMITTER Connect to a TV with Y Pb Pr inputs. interface a AV1 AUDIO wireless Input (L/R)/VIDEO AV2 AUDIO transmitter IN Connectors Input (L/R)/VIDEO output providing COMPONENT VIDEO OUT terminals a high quality for digital audio and video. IN Connectors Notes: Do not touch the inner panel. Electrostatic damage to the unit. pins of the jacks on the rear discharge may cause permanent Wireless transmitter and receiver is not You should supplied. wireless transmitter and receiver and you can use connecting the unit. Wireless Rear Speaker Ready ( with Wireless 6 buy Accessnry Kit : ACC95WK) optional LG AUX Selects DVD output To BAND Select the System' s tuner (FM enjoy Marks 0-9 numerical buttons directly select numbered or options in Displays Selects a more b/B/v/V sound effect. Selects VIRTUAL audio an Displays the disc's Title menu VOLUME To . or removes Program menu. MEMO. Enter forward. playback. radio station's frequency into the CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. ( . /> ) (x) (X) PLAY (B) STOP MUTE ZOOM SLEEP PAUSE/STEP REPEAT Set the all Repeat chapter, track, title, a tuner. REVERSE/FORWARD SKIP ly REPEAT A-B Repeats menu, if available. (+/-) adjust speaker volume. Accesses DVD disc. Reverse/Forward slow selection. PROG. SCAN/SLOW(bb/BB) or menu TITLE MENU Search backward the TUN.(-/+) (b/B) SETUP menu on a menu. To tune in the desired radio station. Selects the sound mode. Accesses the in the Select programme of Radio. language (DVD) or (CD). setup option an display. PRESET(-/+) (v/V) audio channel or removes menu. (left/right/up/down) Acknowledges SOUND Accesses setup ENTER AUDIO an language (DVD). Accesses On-Screen Selects the VIRTUAL sound Selects subtitle DISPLAY natural and realistic enjoy great a Removes the sound. To Introducin menu. RETURN XTS pro enjoy MARKER SEARCH SUBTITLE menu. To point during playback. a SEARCH service, programme number a the multimedia files. MARKER and AM bands) Select input tray. source. USB (CD/DVD). source and closes the disc Opens POWER Select the (Z) OPEN/CLOSE Remote Control at a System to turn specified time. off automatical- RESOLUTION sequence. the resolution your TV. Changes on depending HDMI Switches the HDMI mode to HDMI (active) and OFF (inactive). DIMMER Press to change brightness of the display window on the front panel in power-on status. during TV To control the TV. Remote Control Remote Control Operation Range Point the Remote Control at the Remote Controlsensor and press the buttons. Distance: About 23 ft (7 m) from the front of the Remotesensor Angle: About 30° in each direction in front of the Remotesensor Remove the the Remote (See page battery battery 24) installation cover on the Control, and insert (size AAA) batteries aligned correctly. with rear of two R03 and Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Installation and Setup TV Connections Make the one of the following connections, depending existing equipment. on of your capabilities S-Video connection Connect the S-VIDEO OUT Receiver to the S-VIDEO IN Tips: S-Video cable Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the the (S). Video connection Connect the MONITOR OUT from the DVD/CD connections described below. Receiver to the VIDEO IN the TV Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to video cable make the best connections. Make sure directly jack jack on using the supplied (V). Component Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT Caution: the DVD/CD Receiver is connected to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Rear of TV VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y S Pb V Pr C L AUDIO R Rear of DVD/CD Receiver 8 jack on the DVD/CD jack on the TV using the DVD/CD Receiver to the on the TV using an Y Pb Pr jacks from corresponding in jacks cable (C). Note: HDMI mode must be set to OFF for VIDEO OUT and S-VIDEO OUT and Component video connections. If the drive of USB device is two Optional Equipment folder is Connections 1. Connect a 2. Connect an Device move etc) more, a drive If you want to after you select a folder, the menu or screen. Player (or Digital and mobile Digital cameras supported. phones not are to the OPTICAL IN connector. 3. Connect the USB player, etc.) of DVD to the initial on press RETURN. VCR to the AV IN connectors. optical output displayed port of USB Memory (or MP3 port on the front of the unit. to the USB Antenna Connections Connect the supplied FM/AM antenna for listening to the radio. Front of DVD/CD Receiver DVD Connect the AM Rear of VCR Player (or Digital Device, etc) IN Loop antenna to the AM antenna connector. OUT VID Connect the FM Wire antenna to the FM antenna AUDI OPTICAL OUT connector. AUDIO To AUDIO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) (L/R)/ Notes: VIDEO OUT To AV IN AUDIO To (L/R)/ VIDEO prevent noise pickup, keep the AM Loop antenna away components. from the DVD/CD Receiver and other Be to fully extend the FM wire antenna. connecting the FM Wire antenna, keep horizontal as possible. L AUDIO sure After R it as InstaliodSeup Note: If the audio format of the digital output does not match capabilities of your DVD/CD Receiver, the receiver produce a strong, distorted sound or no sound at the will AM FM Wire antenna Loop antenna(supplied) (supplied) all. To Remove the USB Device from the unit 1. Choose a different function mode or press the L AUDIO R STOP twice in (x) a row. 2. Remove the USB device from the unit. Notes: Don't extract the USB device while Music files DivX files This unit (MP3/WMA), image can be played. can not use a files operating. (JPEG) and USB HUB. Recommended Memory Cards. Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) Compatable with : FAT16, FAT32 Only use the memory cards recommended. Devices which require additional program - - installation when you have connected the unit to computer are In a case of not USB a supported. HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive supported. If there is an extention partition, it will be supported. are not 9 Assembling and Connecting the Speakers to The front is detached from the speaker stands. speaker cords and assemble the front speakers from speaker stands as illustrated. Connect the and rear 1. Connect the terminals speaker on rear 2. Attach the front rotating the Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best the possible surround sound, adjust speaker parameters (volume, distance, etc.). cords to the appropriate rear speaker. speaker stands by Front speakers to the Front speaker (Right) of each front and speaker (Left) screw. Center speaker Rear speaker (Left surround) Rear speaker (Right surround) Subwoofer Notes: Be sure to match the appropriate and -- to --. terminal speaker cable to the the components: + to + If the cables are reversed, the sound on will be distorted and will lack base. If you use front rating, adjust excessive 10 speakers the volume output on the with low maximum carefully to speakers. avoid input HDMI Connection HDMI TV compatible HDMI If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable. 1. Connect the HDMI OUT jack on jack on a Receiver to the HDMI TV or monitor 2. Set the TV's the DVD/CD HDMI compatible (H). H source to HDMI (refer to TV's Owner's manual). 3. In stop mode, select HDMI mode by pressing HDMI. Press RESOLUTION the resolution you wish to to select repeatedly change. L AUDIO R Notes: The the cable connector arrow on body should face up for correct alignment with the connector the DVD/CD Receiver. If HDMI cable is not not on connected, the HDMI button is operated. Resolution You setting change the resolution for the COMPONENT VIDEO OUT by pressing RESOLUTION on the Remote Control. Available resolution settings are as can shown below. OUTPUT CONNECTION If there is noise or lines on the screen, Not all HDCP-compatible NTSC HDMI 1920 x VIDEO OUT 1280 x 720 please check the HDMI cable. DVI devices will work If TV does not Tip the screen, support HDCP, picture or snow 1920 x 1080i VIDEO OUT 1280 x 720p noise appears may be vibrated. MONITOR OUT : When you resolution pressing HDMI connection, you can change the (480p, 720p, 1080i) for the HDMI output by use RESOLUTION on (High For Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DVI-equipped TV. Connection to an HDMI TV while connection to or a requires an HDMI cable DVI-equipped TV requires an adaptor. HDMI has the enhanced, x 480p 720 x 480i 720 x 480p 720 x 480i 720 x 480p 720 x 480i Notes: Definition Multimedia HDMI to DVI S-VIDEO 720 the remote control. About HDMI HDMI x 1080i 720p 480p COMPONENT with this DVD/CD Receiver. on InstaliodSeup Available Resolution capability to support standard, high-definition video plus standard to audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of between the AV connectors), source and communication and AV devices such and 1080i resolution on the component displayed at the 480p(NTSC) 1080i, 720p, and 480p do video connections resolution. not work with the (MONITOR as OUT). MENU If your TV does not accept your resolution abnormal picture appears on the screen. setting, Please read TV's owner's manual then set the resolution that your TV can accept. Caution: the resolution when the recorder is DTVs. Changing HDMI, the HDMI logo and High-Definition Multimedia connected with HDMI connector may result in malfunctions. To solve the problem, turn off the Interface HDMI are trademarks licensing LLC or registered trademarks of analog OUT & S-VIDEO If you change the resolution, the display (MP3/JPEG/DivX) size is changed. multi-channel surround-sound several cables and 720p video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be recorder and then turn it on again. 11 Displaying Disc Information Initial on-screen You can loaded 1. display various information about the disc on-screen. Press DISPLAY to show various playback To information. The items 2. displayed differ depending playing status. type or You can change Title select an (Track) -- the disc by pressing v / V and setting by pressing b / B. Current title display and exit the Menu: Press SETUP to display the menu. SETUP will take you back to initial item select the or on Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 12 to 15 (or track). (or tracks). A second press of screen. To go to the next level: Press B on the Remote Control. To go back to the previous level: Press b on the Remote Control. number/total number of titles Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. -- GENERAL OPERATION -- -- Subtitle Angle Sound -- -- -- Selected subtitle. Selected angle/total number of If no button is Press SETUP. The Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP angles. Selected sound mode. Note: screen 1. 2. pressed for a display disappears. few seconds, the on- or Setup menu appears. PLAY to exit the option Setup then menu. LANGUAGE LANGUAGE OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Select OSD Select a language for the Setup menu and on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio (disc audio), subtitles, and the disc menu. Original -- Refers to the track original language the disc was Other To select another in which recorded. language, press number corresponding 4digit number according to the language code list on page 25. If you enter the wrong language code, -- buttons then ENTER to enter the press CLEAR. 12 DISPLAY DISPLAY TV 16:9 Aspect Display Widescreen Mode Move TV Select Aspect 4:3 -- 16:9 Display Display Select when -- a Select when standard 4:3 TV is connected. a 16:9 wide TV is connected. Mode Mode setting works only when the TV Aspect InstaliodSeup mode is set to "4:3". Letterbox -- Displays a wide picture with bands portions of the screen. on the upper and lower Panscan on -- Automatically displays the entire screen the wide and cuts off the picture portions that do not fit. 13 AUDIO 5.1 Each DVD disc has Set the receiver's variety of audio output options. AUDIO options according to the a type of audio system you Press ENTER and 5.1 On Speaker Front L 0ms Sync Size Small Volume 0 dB Distance 0 m Test Move Off Select Select With the DVD* 1 Control (DRC) format, you can hear a program's soundtrack in the most accurate and realistic thanks to audio 3. Adjust options using Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this Select Dolby Digital only Return Use b / B to select the desired 4. effect. Move 2. presentation possible, digital technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). *1: Enter speaker. v / V / b / B buttons. Press ENTER to confirm your selection. Returns to the previous menu. selection Speaker speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Note: Vocal Certain Set Vocal to On only DVD is The karaoke channels playing. when a multi-channel karaoke on the disc will HD AV Since the Sync When using Digital TV. signal could not be transmitted simultaneously because of later transmission of video signal compared to audio signal. Because it takes some time to convert analog video signal to digital one in the Digital TV. And It means that you may not enjoy picture on the screen and sound from speaker at the same time even though it is one scene. Sometimes AV In the HD AV to audio Sync menu, you could adjust delay signal for simultaneous AV signal time transmission Delay time could be set up with 10msec unit. (0 300msec) Delay time is different with each TV Brand. So you need to adjust optimal delay time complying with ~ your TV. speaker settings are prohibited by Digital licensing agreement. the Dolby Size mix into normal stereo sound. change speaker settings settings. fixed, you are cannot the Volume Press b / B to speaker. (-5dB adjust the output 5dB) level of the selected ~ Distance If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the Press b / B to speaker. (You same time. the Distance of the selected adjust adjust can't front / Woofer speakers) Test Press b / B to test the of each signals the volume to match the volume of test memorized in the Front Left Rear 14 menu On Vocal Dynamic Range Speaker Setup AUDIO Select Speaker Setup DRC HD AV for the built-in 5.1 channel appears. AUDIO 5.1 following settings surround decoder. 1. use. Speaker Setup Make the speaker. Adjust signals system. (L) Right (R) → Center → → Front Rear Left (L) Right (R) → → SubWoofer LOCK Area Code (Parental Control) Enter the code of the LOCK Rating Unlock Password **** Area Code US whose standards area used to rate the DVD video disc, based on were the list on page 25. 1. Select "Area Code" on the LOCK menu then press B. 2. Move Follow step 2 as shown Select 3. Select the first character Rating Blocks of rated DVDs based playback content. Not all discs are 1. Select the LOCK "Rating" on on previous paragraph (Rating). 4. their using v / V buttons. Press B and select the second character using v / V buttons. rated. menu 5. then Press ENTER to confirm your Area code selection. press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. OTHERS OTHERS Input password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake a before 3. Select pressing ENTER, a Rating rating DivX(R) Registration press CLEAR. from 1 to 8 using the v / V buttons. Rating one (1) has the most rating eight (8) is the least 1-8: InstaliodSeup Select restrictions and Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then can enter or change password. 1. Select Password 2. Follow DivX(R) Registration We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Password You step 2 as on the LOCK shown above menu 1. Select 2. Press ENTER while "Select" is selected and the (Rating). videos from DivX change the password, press ENTER when the "Change" option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the forget your password, following steps: 1. Press SETUP to 2. Input the display then press B. or rent the VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. 3. Press ENTER to exit. menu. Note: forget your password If you "DivX(R) Registration" option registration code will appear. Use the registration code to purchase then press B. To If you Select Move restrictive. you the can clear it Setup using the All the downloaded videos from DivX be played back on VOD can only this unit. menu. 6-digit number "210499" and password is cleared. press ENTER. The 15 Operation General features Buttons Z (OPEN X (PAUSE) / CLOSE) Opens (. closes the disc or During playback, Press X SKIP Discs Operations / >) tray. press X to pause repeatedly to playback. play Frame-by-Frame. During playback, press next chapter/track or to current chapter/track. SKIP Press SKIP . twice briefly (. to >) to go to the beginning of the or return to the step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly required scan speed. DVD : 5 steps (X2, X4, X8, X16, X100) DivX disc : 4 steps (X2, X4, X8, X16) WMA/MP3, Audio CD : 3 steps (X2, X4, X8) to select the REPEAT During playback, desired DVD Video discs: Audio A-B press REPEAT repeatedly to select a repeat mode. Chapter/Title/Off CD, DivX/MP3/WMA discs: Track/All/Off During playback, each press of A-B button to select point point B and repeats a sequence from point A (Starting point) to point B (End point). A and Press REPEAT A-B to exit. ZOOM During playback or pause mode, press ZOOM to enlarge image (3 steps). You can move through the zoomed picture using bBvV the video buttons. TITLE If the current DVD title has appears on the screen. a menu, the title Otherwise, the disc menu menu may appears. DVD MENU (SUBTITLE) The disc menu appears on the screen. During playback, press SUBTITLE repeatedly language. to select desired subtitle (AUDIO language) During playback, press AUDIO repeatedly different audio language or audio track. SLOW 16 Pause mode, press SLOW (m required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or or T M) to hear a to select the (1/2, 1/4, 1/8, 1/16) a Notes general features: on Last Scene If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback This receiver memorizes last that is viewed. The last The A-B on some scene from the last disc remains in memory the disc from the receiver or cancels. Zoom may not work Memory scene even if you remove switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. DVDs. repeat function is available only in the current title. Note: This receiver does not memorize the Additional features switch off the receiver before scene commencing of to a disc if you the disc. play Time Search To start at any chosen time playing on the disc: 1. Press DISPLAY 2. Press v / V to select the time clock icon and during playback. "--:--:--" appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. Press ENTER to confirm. 4. Playback starts from the selected time. Marker Search To enter You Marker a start can playback To enter points. desired point the TV screen on from up to nine memorized at the marker, press MARKER a the disc. The Marker icon appears to enter up to nine on briefly. Repeat markers. To Recall or 1. During disc search menu 2. Clear a Marked Scene playback, appears press SEARCH. The marker on the screen. Within 10 seconds, press b / B to select number that you want to recall or clear. Press ENTER and 3. marked scene. playback a marker starts from the Or, Press CLEAR and the marker number is erased from the list. 4. You on can play any marker by the marker search menu. inputting its number Screen Saver The Stop appears when you leave the unit in mode for about five minutes. screen saver 17 Playing This unit an Audio CD Audio CDs play can or or MP3/WMA file MP3/WMA files The program function enables you to store your favorite tracks from any disc in the receiver memory. A recorded media. program MP3/ WMA/ Audio CD Once you insert Audio MP3/WMA files recorded media an or appears on the TV screen. Press v / V to select a track/file then press PLAY or ENTER and playback starts. You can use variable CD, playback Programmed Playback 1. 2. 0:00:00 Select a track on the "List", then press PROG. or " additional tracks place JPEG List disc. (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to 1/104 MP3 Program List a select 1/12 Audio CD Insert contain 300 tracks. Audio CD and MP3/WMA Discs: a menu functions. Refer to page 16. 0:00:00 can on the list. Program Track1 Music Folder 1 Track2 Music Folder 2 Note: Track3 Music Folder 3 Track4 Music Folder 4 Track5 Music Folder 5 Track6 You Music Folder 6 Track7 Track8 Music Folder 8 add all tracks in the disc. Select Tips: Press MENU to move to the next page. PHOTO word top of the on menu MP3 / WMA disc as is 4. Press PLAY ? ? player is 5. Sampling frequency: within 32 48 kHz (MP3), 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - - - CD-R a file extension other than physical an to ".mp3" / ".wma". 1. format should be ISO 9660 2. playback MP3 / WMA files.We recommend Easy-CD Creator, which creates an ISO File should have must incorporate ? They should not contain ? The total number of files a played once. resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY. .mp3 or .wma extension. special letters such as / ? playing Press REPEAT to select ? " * : a disc. The a desired Off(No display): a does not Track from play repeatedly. "Program" List Use vVto select the track that you wish to Program list. 999. 2. discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required the 18 copyright owner. erase " Press CLEAR. Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks Erasing on the the list. Complete Program Use v / V to select " (Del all)", List then press ENTER. in order to download MP3 / WMA files and music from the Internet. Our company has no right to permission. Permission should always be repeat mode. repeats the current track ALL: repeats all the tracks on programmed list. from the the disc should be less than requires repeat TRACK: Erasing 1. on Tracks Press REPEAT when ? maximum of 8 letters and <>letc. This DVD/CD Receiver in To ? ? an Playback begins icon appears. that you use 9660 file system. names list have Repeat Programmed MP3/WMA file If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible ENTER to start. - The DVD/CD Receiver cannot read that has ? with this or the order in which you programmed the tracks. Playback stops after all of the tracks on the highlighted. follows: within 24 ? compatibility icon Select the track you want to start playing on the "Program" list. Press MENU to move to the next "Program" ? ( Add All)" page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a limited " then press ENTER. 3. On can Music Folder 7 grant such sought from Note: The programs are also cleared when the disc is removed. Viewing a JPEG file JPEG JPEG disc limited with this player is This unit Before JPEG can play discs with JPEG files. playing JPEG recordings, read the Recordings on right. compatibility follows: as Insert 1. disc and close the a The PHOTO menu notes on ? on see an on-screen the TV screen. of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels some PHOTO as Preview List upon the size and number of JPEG a long time for the DVD/CD Receiver to read the disc's contents. If you don't display after several minutes, tray. appears Depending files, it could take --- 2760 x 2048 pixels and burn another disc. JPEG Folder 1 JPEG Folder 2 ? JPEG Folder 3 JPEG Folder 4 The total number of files and folders on the disc should be less than 999. JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? JPEG Folder 8 ? Press v / V to select 2. folder, and press ENTER. a A list of files in the folder appears. If you are in a file list and want to return to the Folder previous Remote to list, use the v / V buttons on ? ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While 3. viewing a file, you can press STOP previous menu (JPEG menu). to move to the Ensure that all the selected files have the extensions when the and press ENTER. highlight Some discs may be incompatible due to a different recording format or the condition of disc. copying If the files have ".jpe" please them File rename names without able to be read though the files Windows by or as into the CD ".jpg" layout. ".jpeg" extensions, ".jpg" file. ".jpg" extension will not be this DVD/CD Receiver. Even are shown as JPEG image files in Explorer. Note: When viewing a JPEG file, the resolution is changed 480p if the resolution set to 1080i. You 720p or can change the resolution for 480p. Tips: There four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / select the option you want to use then press ENTER. > are (Slow), If you set >> Speed option Off, Slide is to B to not active. Slide Show Use vVbBto press highlight the (Slide Show) ENTER.(You can not change resolution) Operation then Still Picture 1. Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide PAUSE/STEP Moving press again. (. or >) once to advance to the next To rotate while or viewing a previous file. picture Press b / B picture or to another File Press SKIP picture show, press PLAY during showing clockwise or a picture to rotate the counter-clockwise. 19 Playing a DivX Movie file DivX disc this DVD/CD Receiver you Using can play compatibility with this player is limited follows: as DivX disc. ?A vailable resolution size of the DivX file is under 1. Insert disc and close the a on appears the TV tray. The MOVIE menu 800x600 screen. ? The file (W x name H) pixel. of the DivX subtitle is available by 45 characters. MOVIE 0:00:00 List ? Movie Folder 1 If there is impossible code to express in the DivX as mark on the file, it may be displayed Movie Folder 2 Movie Folder 3 Movie Folder 4 " " _ display. Movie Folder 5 Movie Folder 6 Movie Folder 7 ? Movie Folder 8 If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. 2. Press v / V to select a folder, and press ENTER. ? A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the Remote to interleaved, either video or audio is outputted. and highlight If the video and audio structure of recorded file is not press ENTER. Playable 3. 4. If you want to view a particular file, press v / V to highlight a file and press ENTER ? or On CD with a Playable Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) ? Tips: move to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Playable ? Be sure DivX file to select "SUBTITLE ON" mode by playing the subtitle file every time before a Playable "AC3 . ? When the subtile has the more than two languages in file, original subtile is only available. The DivX files in your memory card can played. You not adjust sound mode and during the DivX file playing. can sound Notice for displaying If the subtitle does not VIRTUAL the Divx subtitle display properly during playback, press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle is 20 displayed properly ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", ", "3IVX ". Audio format ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz (MP3), 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - within 24 ? not be Codec format "DIVX3.xx "MP43 Notes: pressing DivX file ", ".mpg ", ".mpeg ", ".divx" PLAY. Press STOP to exit. Press MENU to ".avi - - - DVD Audio Discs DVD Audio is success disc format building provide high quality, a new of DVD to Moving multi-channel audio for on Some DVD Audio discs divide content into different the uncompressed, experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on a new groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1. Press DISPLAY 2. Press 3/4 to select the disc itself. DVD Audio provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can (compared A to another GROUP be delivered with up to 24 bits of data to 16 bits for a standard CD). used for music, either Advanced Resolution multi- quality that is closer to the artist's recording or for longer recordings. Many DVD on-screen text, such as a or in stop mode. icon. the numbered buttons (0-9) to select group number. Note: channel sound Audio discs contain Press 1/2 3. on Sometimes the author of the disc creates hidden DVD Audio disc contains up to seven times capacity of a CD. This additional space is master Group can the data typical during playback artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's jacket cover or on a web site). This password control isn't dictated by your DVD/CD Receiver it is --- a function of the disc. Since the available authoring of DVD Audio Discs varies, display choices might not be for the disc you're playing. Viewing another PAGE of the some on-screen Note: To enjoy of DVD maximum sound Audio, you must quality use output (5.1CH AUDIO OUT jacks Receiver). and surround effect 5.1 channel on analog audio the DVD/CD Since DVD Audio discs can hold a lot of content, there on the disc. are various ways to see what's available 1. Press DISPLAY during playback. 2. Press 3/4 to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Operation Note: Since the of the authoring of DVD Audio Discs varies, display choices might not be for the disc you're playing. some on-screen available 21 the Radio Stations Presetting You can Before preset 50 stations for FM and AM make tuning, sure Preset radio stations in the DVD/CD Receiver's (MW). that you have turned down the volume. AM (MW) on the Remote Control until FM appears in the or display Press and hold about two seconds until the starts to TUN.(-/+) for frequency indication Scanning stops when the DVD/CD Receiver tunes in a or AM (MW) repeatedly Control to select the appears in the on the Remote preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. change, station. 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the Remote Control repeatedly. - Press PROG./MEMO. A the window. Press PRESET +/- 2. then release. 4. on The last received station is tuned in. BAND, FM and AM (MW) changes alternately. 3. radio stations" (see "Presetting Press BAND until FM 1. window. display And then every time you press 2. memory first left). Press BAND 1. to the Radio Listening on the Remote Control. To turn off the radio preset number will flash in the display window. Press POWER to turn the DVD/CD Receiver off Press PRESET +/- 5. select the on preset number you Press PROG./MEMO. 6. 7. the Remote Control to on select another function mode want. To listen to the Remote Control non-preset radio stations again. Use manual The station is stored. For manual Repeat steps To tune in a 3 to 6 to store other stations. station with Press a in TUN.(-/+) repeatedly station manually. weak step or automatic tuning, For automatic press tuning in step 2. TUN.(-/+) repeatedly. press and hold TUN.(-/+) for about two seconds on the front panel. tuning, signal 3 to tune in the To select You preset radio station directly a the number buttons can use Control to select on the Remote Press and hold PROG/MEMO for about two seconds preset radio station directly. For example, to listen to preset station 4, press 4 on the Remote Control. To listen to preset station 19, and "ERASE ALL" is press 1 then 9 To clear all the stored stations appeared and then press PROG/MEMO cleared. in the display window the stations again, the "ERASE ALL" change display will go off by itself and to normal mode. To change above. Press MONO/ST. disappears stereo in the effect, but the button again already been the entered, the FULL preset number, follow the steps a 5-6 3 seconds). as noisy panel so that "ST." display window. There will be no the reception will improve. Press on the front to restore the stereo effect. improve reception supplied antennas. Reorient the Note: If all stations have (within For your reference If an FM program is To message will appear in the display window for moment and then a preset number will flash. a are If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, 22 or (DVD/CD, AUX, USB). Sleep You can Timer XTS/XTS pro Setting set the DVD/CD Receiver to turn off at automatically a specified The SLEEP indicator and display sleep sleep XTS ON in the following The order. When playing the movie with the relatively to the general music, it can check the time before the DVD/CD remaining sense Receiver turns off. Press SLEEP. The remaining Press the DIMMER mute your unit in changing changing it to 2.1 CH. press VIRTUAL the order, for example, Connect a stereo headphone PHONES connector. VCRs or into the plug ( 3.5mm) speakers are automatically disabled plug in headphones (not supplied). can use source other units connected to the AV Each time you press this button, the mode of the changes in the following sequence: (L/R) selecting the analog signal from AV1/2 AUDIO & VIDEO IN Connectors. AV 2 OPT: for selecting the Display Effect VIRTUAL 3D STEREO 5.1 ch VIRTUAL Multichannel sound Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. when you function for Source 2.1 ch. 3D STEREO IN or Optical connector. Refer to the Owner's Manual supplied with the unit for further information on the operation. Press AUX repeatedly on the Remote Control to select the desired input source. : Multichannel sound The Multichannel sound makes ch sound therefore this mode optical digital signal from AV2 The Optical input function is available only when the other unit's Sampling Frequency is 32 96kHz. You can also select the input source by pressing FUNC. button on the front panel. ~ Press and hold down this button about 3 repeatedly to select input 5.1 ch feel 10.1 a emotion can Sound Mode You the enjoy surround sound simply by selecting pre-programmed sound fields according to program you want to listen to. (2 ch. sound only) can of the BYPASS ON STAGE STUDIO CLUB THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX →BYPASS... → Notes: a provides which you are involved with sound and you feel detailed sound. one VIDEO IN & OPTICAL IN Connector. then press VIRTUAL sound. Jack The Selecting input setting to the telephone, "MUTE" indicator flashes in the window. Using Headphone IN disabled when VIRTUAL sound Press MUTE to mute your unit. AV 1/2 temporarily from 2.1 CH to 5.1 CH and it is enabled when repeatedly. Mute You via the Note: The XTS mode is This function will change the brightness of the display window on the front panel during in power-on status. display of sound at woofer for you to satisfy with. BYPASS, It creates the high display effect by playing the sound source rear speakers same as the front speakers. window. can weak bass sound enforces the In the mode of 2 CH time appears in the Dimmer answer unique XTSON Note: You XTS-P ON... creates the 30→20→10→OFF display → sound quality of the LG Technology optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. setting SLEEP180→150→120→90→80→70→60→50→40→ You NORMAL → XTS-P ON window. changes in time. time appears in the Each time you press SLEEP the 2. setting changes the Press SLEEP to set the desired 1. Each time you press XTS pro the following order. time. → → → → → → → HALL → Note: Initial sound mode is BYPASS seconds, source. 23 Controlling You can Your TV with the control the sound source, and remote. level, input power switch of your LG TV with the Code numbers of controllable TVs supplied If You can control your TV using Remote Control Supplied the buttons below. more them than one at code number is one a listed, try entering time until you find the one that works with your TV. TV Control Buttons By pressing You POWER Turn the TV can on or off. CHANNEL(v / V) Scans up or down through memorized channels. VOLUME +/-- Adjust TV INPUT Switch the TV's input source input sources. Turns Code Number Manufacturer Code Number 16,33,37,44,45 MONTGOMERY 01,06,08,09 AIWA 70 WARD 23,24,32,33,34 AKAI 01 NEC 01,08 AMARK 09 NOBLEX 07 AOC 01 PACKARD BELL 43 BELL & HOWELL 33 PANASONIC 07,11,13,25,35,36 BROKSONIC 18,19 PHILCO 01,06,07,08,09, CANDLE 51 on or 15,38,43,58 CCE 07 PHILIPS 06,07,43,61,62,65 CENTURION 08 PIONEER 30 CINERAL 43 PORTLAND 09 CITIZEN 49,50,51,52,53,54,55 PROSCAN 03,37,44 CORONADO 09 QUASAR 11,13 CROWN 09 RADIO SHACK 16,17,23 CURTIS MATHES 01,03,37,44,69 01,03,08,33,35,37,44 RCA DAEWOO 16,38,39,40,41,42,43 REALISTIC 16,17,23 DAYTRON 01,08 SAMPO 08 EMERSON 01,09,16,17,18,19 SAMSUNG 01,08,09,25,68 FISHER 28,29 SANYO 28,29 FUNAI 46,47 SCOTT 01,08 GENERAL ELECTRIC 03,10,11,13,37,44 SEARS 09,25,26,27,28,29 GRADIENTE 01,56,57,63,67 SEMP 64 HITACHI 09,14,15,43 SHARP 09,22,23,24,60,66 JC PENNEY 01,08,10,27,35 SIGNATURE 2000 01,06,08,09,10, JVC 20,21,63,67 KIOTE 43 SONY 12,62 KMC 23,24,33,34 09 SOUNDESIGN 51 KTV 01,08,09,31 SYLVANIA 01,04,05,06,07, LG 01,07,08,09,35,39,40 (GOLDSTAR) 08,35,51 LODGENET 33 SYMPHONIC LOGIK 33 TATUNG 11 LXI 09,24,25,26,27,28,29 TEKNIKA 07,09,16,33,51 MAGNAVOX 01,02,04,05,06, TELERENT 09,33 07,08,09,20, THOMSON 69 34,35,43,51,61,62,65 YORX 08 the volume of the TV. between the TV and other MUTE Manufacturer ADMIRAL MAJESTIC 46,47 33 TOSHIBA 01,25,26,27,64 MARANTZ 01,32 WARDS 01,06,08,09,10,33,34 MEMOREX 33 XR1000 48 MGA/MITSUBISHI 01,08,32,34 ZENITH 01, 02,33,59 off TV sound. Notes: Note: Depending on the unit be able to control Controlling being connected, you your TV using some of the may not buttons. other TVs with the Remote You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV 2. 24 (Refer to table on Release TV POWER button. the right column). Depending on not function your TV, the TV, on some or even all buttons may entering the after correct manufacturer code. If you enter a new code number, the code number entered will be erased. previously When you replace the batteries of the Remote, the code number you have set may be reset to the default again. setting. Set the appropriate code number Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose a area Area code from this list. Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG 25 Troubleshooting Check the following guide for the possible cause of a before problem contacting Correction Cause Symptom No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? Plug the power cord wall outlet. securely Insert that the DVD or, is ? picture. a disc. (Check into the audio CD indicator in the DVD does not work. No service. The TV is not set to receive DVD signal ? Select the mode output. display lit.) appropriate the TV on so video the input picture from the DVD/CD Receiver appears TV screen. ? The video cable is not connected ? no sound or The connected TV power is turned off. ?T ? The ? a connected with the equipment not connected are ? ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. connecting cable does not start is damaged. dirty. poor. The DVD/CD Receiver input mode of the so Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. ? is Select the correct jacks securely. securely. playback picture the TV. you can hear the sound from the DVD/CD Receiver. signal output. The audio cables urn on audio receiver audio cable is not set to receive DVD ? The Connect the video cable into the ? very low-level sound is heard. only urn on the equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD playback. is ? An the jacks securely. securely. There is on unplayable disc is inserted. ? or display lit.) Insert disc a playable disc. the (Check type, colour system and Regional code.) ? ? The disc is placed upside The disc is not placed ? down. Place the disc with the within the guide. ? Place the disc The disc is ?Amenu is ? dirty. on the TV ? screen. The Rating level is set. ? heard. or noise is ? The disc is ? The ? dirty. speakers and components poorly. are ? The DVD/CD Receiver is located too close to the TV. 26 tray guide. menu screen. Cancel the rating Rating function or change level. Clean the disc. Connect the speakers and components securely. connected ? the disc Press the SETUP button to turn off the Loud hum side Clean the disc. the ? on inside the correctly ? playback down. ? Move your TV away from the audio components. Cause Symptom Radio stations cannot ? The antenna is Correction positioned or connected poorly. be tuned in. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? ? The of the stations is too weak in with automatic signal strength (when tuning tuning). No stations have been preset or preset ?T ? une in the station Preset the stations manually. (page 22). stations have been cleared (when tuning by scanning preset stations). The Remote Control ? The Remote Control is not does not work the Remote properly. Receiver. ? sensor pointed at ? of the DVD/CD The Remote Control is too far from the ? DVD/CD Receiver. ? There is an Point the Remote Control at the Remote sensor Use the Remote Control within about 23 ft obstacle in the path of the of the DVD/CD Receiver. (7 m). ? Remove the obstacle. ? Replace ? Press DIMMER Remote Control and the DVD/CD Receiver. ? The batteries in the Remote Control are flat. The front display panel is too dim. ? Nothing display. is displayed on the front panel the batteries with on new ones. the Remote Control. 27 Specifications Power Genral Refer to main label Net 3.9 kg 430 x External dimensions (W x H x D) conditions CD/ VD AM [MW] Amplifer 295 mm 5°C to Laser Semiconductor Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input NTSC 525/60 laser, wavelength 28 20 kHz (1 kHz, at 1W position) (20 kHz LPF) (p-p), 75 Ω, negative sync., RCA jack x 2 1.0 V (p-p), 75 Ω, negative sync., RCA jack (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x (Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1 output 87.5 108.0 MHz - 65.0 or - 74.0 MHz, 87.5 60 dB 140 522 1,620 kHz - or 520 1,720 kHz - 450 kHz (* Depending on the sound mode settings and the source, there may be no sound output.) Surround*: 155W 155W + (Rated Output Power 130W, 4Ω at 1 kHz, THD 10 %) 155W (Rated Output Power 130W, THD 10 %) + Centre*: 155W + 155W Subwoofer*: 225W AV Inputs Outputs (Rated Output Power 130W, 4Ω at 1 kHz, THD 10 %) (Rated Output Power 180W, 3Ω at 30 Hz, THD 10 %) IN, OPTICAL AUDIO S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 2 Rear Way 3 Speaker Speaker (LHS-96MBS) 2 Way 150 Sound Pressure Level 20,000 Hz - 88 dB/W Rated (1m) 155W D) 280x1200x280 Weight 3.9 subject to change kg Speaker 120 - 20,000 Hz 83 dB/W (1m) 2 Way 117x210x111 0.65 without notice. 3 Speaker Passive Subwoofer (LHS-96MBW) 1 Way kg 150 - 20,000 Hz 88 dB/W (1m) 495x83x90 1.6 Speaker kg 40 - 1,500 Hz 82 dB/W (1m) 225W 450W 310W mm 1 3Ω 155W 310W mm V) Speaker (LHS-96MBC) 4Ω 155W 310W x 3 1.0 Center 4Ω 4Ω are 108.0 MHz (Mono) Front: 155W H 1 8,000 Hz - 155W x - 1 x 10.7 MHz Surround mode Input Power Max. Input Power Net Dimensions (W LPF/A-Filter) 1.0 V output specifications dB, 0.5 % Stereo mode and NOP -6 (1 kHz, Speaker (LHS-96MBF) Designs nm More than 70 dB Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Net 650 150 Hz to 18 kHz More than 75 dB Front Speakrs status: Horizontal 35°C, Operation 5% to 85% COMPONENT VIDEO OUT FM x Temperature: S-video Video 57 Operating Operating humidity Video Tuner Refer to main label supply consumption Weight Power mm 240x450x390 10.5 kg mm This LG Electronics product, will be repaired or replaced, at LG's option, if it proves to be defective in material or workmanship, under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories. WARRANTY PERIOD: LABOR: 90 days HOW SERVICE IS HANDLED: from the Date of Purchase. Call 1-800-243-0000 for instructions defective unit PARTS: One Year from the Date of Purchase. repaired or Parts of the replaced are warranted for original warranty period. the remaining portion the receipt and your box repair or replacement. to Shipping both ways will be paid by LG during the first 90 days of the Warranty Period. During the remainder of the Warranty Period (91-365days), you pay inbound shipping charges and LG pays return shipping charges. Visit THIS WARRANTY IS IN LIEU OF ANY OTHER getting Please retain dated sales return the unit to LG for * on replaced. our website at: http://www.lgservice.com WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT DAMAGES OF ANY LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state. not apply or to THIS LIMITED WARRANTY DOES NOT APPLY TO: ? shipping, installation, adjustment of user controls, calibration, separate system components; and Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial use, or other causes not arising out of defect in material or workmanship. Damages or operating problems maintenance ? Therefore, the or cost of failure to repair or that result from maintain, or replacement of such defective product shall be borne by the consumer. CUSTOMER INTER-ACTIVE CENTER NUMBERS: For nearest Authorized Service Product Assistance, or Center, Where Customer Assistance to buy, Call 1-800-243-0000 and select Or visit LG ELECTRONICS U.S.A., INC. 1000 SYLVAN AVENUE ENGLEWOOD CLIFFS, NJ our (24 hours a day, 365 days per year) appropriate options from the menu. website at http://www.lgservice.com P/N : 3834RT00?? Issue O Printed in China
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project