LG LH-TK250SC Owner's manual

LH-TK250SC
JA3ULLA_English
DVD
KARAOKE RECEIVER
OWNER'S MANUAL
MODEL: LH-TK250SC
(Main Unit: LH-TK250,
Speakers: LHS-25SCS, LHS-25SCW)
R
Before
connecting up, operating or repairing
product, please read this instruction booklet
carefully and completely.
P/N: 3834RH0104Z
this
Precautions
Safety
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user
about the presence of uninsulated dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
The exclamation mark within
is intended to alert the
important operating
an
equilateral triangle
about the presence of
and maintenance (servicing)
About the
user
instructions in the instructions
accompanying the
symbols
Indicates hazards
itself
or
other
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
a
confined space
CAUTION:
This DVD/CD receiver
To
ensure
proper
use
employs
of this
a
laser system.
product, please read this owner's
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service location (see service procedure).
manual
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the apparatus.
likely to cause
material damage.
Indicates
special operating
Indicates
tips
MOISTURE.
WARNING: Do not install this equipment in
such as a book case or similar unit.
for instructions
and hints for
harm to the unit
features of this unit.
making
the task easier.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic", and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and
other worldwide patents issued and pending. "DTS" and "DTS
Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
OTES ON COPYRIGHTS:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is located on the back
of this unit. This number is unique to this unit and not available
to others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
AudioCDandMP3/WMADisc...............20
Playing
an
Audio CD and MP3/WMA Disc
.
.
.
.
.
20
BeforeUse..............................4-5
Pause.............................20
PlayableDiscs...........................4
Precautions.............................5
MovingtoanotherTrack...............20
RepeatTrack/All/Off...................20
NotesonDiscs..........................5
Search.............................20
AboutSymbols..........................5
FrontPanelandRearPanel..................6
JPEGDiscOperation......................21
ViewingaJPEGdisc.....................21
RemoteControlOverview....................7
SlideShow.........................21
StillPicture.........................21
Preparation
Connections............................8-10
TVConnections.........................8
.8
ExternalEquipmentConnections
SpeakerSystemConnection................9
.
.
.
.
.
.
.
.
.
.
.
AerialConnections........................9
SpeakerPositioning......................10
BeforeOperation.......................11-16
Mini Glossary for Audio Stream & Surround
Mode.................................11
SoundMode...........................11
On-ScreenDisplay.....................12
InitialSettings........................13-16
GeneralOperation....................13
Language..........................13
Display............................13
Audio..............................14
Lock(ParentalControl)................15
Others.............................16
Operation
DVDorVideoCDOperation...............17-19
PlayingaDVDandVideoCD...............17
GeneralFeatures.....................17-19
Movingtoanotherfile.................21
Torotatepicture......................21
ProgrammedPlayback.....................22
RepeatProgrammedTracks................22
.22
ErasingaTrackfromProgrammeList
22
Erasing the Complete Programme List
DivXDiscOperation.......................23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalInformation.....................24
LastConditionMemory...................24
ScreenSaver...........................24
SystemSelect..........................24
ControllingtheTV.......................24
OperationwithRadio......................25
Presettingtheradiostations................25
Listeningtotheradio.....................25
OtherFunctions...........................26
SleepTimerSetting......................26
Dimmer...............................26
Mute.................................26
XTS(ExcellentTrueSound)................26
XTSpro...............................26
KARAOKEOperation....................27-30
KaraokeBasicPlayback...................27
.27-28
KaraokeAdvancedPlayback.
KaraokeMENUPlayback...............28-30
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTITLE...............17
17
Moving to another CHAPTER/TRACK
SETUP............................28
SlowMotion.........................17
RANDOM..........................30
.
Still Picture and
.
.
.
Frame-by-Frame Playback
.
.
18
MUSICLIST........................29
CHALLENGE........................30
Search.............................18
Repeat............................18
RepeatA-B.........................18
TimeSearch........................18
MarkerSearch.......................19
Zoom..............................19
Reference
LanguageCodeList.......................31
CountryCodeList.........................31
Troubleshooting........................32-33
Specifications............................34
SpecialDVDFeatures....................19
TitleMenu..........................19
DiscMenu..........................19
ChangingtheAudioLanguage.
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
Subtitles...........................19
3
Introducin
Before Use
Playable
Discs
ote on DTS-encoded CDs
playing DTS-encoded CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the
volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
When
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
SVCD and CD-R
or
MP3, WMA, JPEG
DVD-RW, DVD+RW,
CD-RW that contains audio titles,
can
or
play
a
DivX files.
Disc-related terms
Title
(DVD only)
The main film content
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc
itself, some CD-R/RW (or DVD-RW, DVD+RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
Some
of DVDs and Video CDs
playback operations
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Make sure to also refer to the instructions
or
supplied
purposes may not be able to be
you to locate it
played
on
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
On
(VCD)
Video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
with
the DVDs and Video CDs. Some DVDs made for busithe
unit.
Types
There
of Video CDs
are
two
types of Video CDs:
Video CDs
code of the DVD/CD receiver and DVDs
This DVD/CD Receiver is
designed
and manufactured for
playback of region "2" encoded DVD software. The
region code on the labels of some DVDs indicates which
type of player can play those discs. This unit
can only play DVDs labeled "2" or "ALL". If you
2
try to play any other discs, the message "Check
Regional Code" will appear on the TV screen.
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
4
additional feature content, or music album.
Each title is assigned a title reference number
Scene
otes on DVDs and Video CDs
Regional
feature content
or
otes
ness
accompanying
or
equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the
functions, or other
typical computer-like operations. Moreover, still pictures
of
high
system via
resolution
menus, search
can
be
played
if
they
are
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
shipping the unit
The original shipping carton and packing materials may
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be disturbed during playback. In this case, position
When
the unit away from the TV, VCR,
unit after removing the disc.
To
use
volatile
such
liquids,
turn off the
leave marks
Cleaning
use a
there may be a considerable temperature
increase inside the car.
light,
as
Cleaning
discs
Fingerprints
or
and dust
the disc
on
reduce sound
with
a
clean
Before
quality.
cloth. Wipe
distort the
can
picture
clean the disc
playing,
the disc from the centre out-
wards.
on
or
the surface.
the unit
Do not
To clean the cabinet
a
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
plastic products in
long period of time. They will
contact with the unit for a
Use
store the disc in its case.
insecticide spray,
as
the unit. Do not leave rubber
near
or
playing,
the exterior surfaces clean
keep
Do not
radio,
or
discs
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzene,
or
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
alcohol,
the surface
strong solvents such as alcohol, benzene,
thinner, commercially available cleaners, or anti-static
use
spray intended for
About
vinyl
records.
Symbols
of the unit.
About the
To obtain
clear
a
picture
The DVD/CD Receiver is
a
high-tech, precision
device.
If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
""
may appear on the TV screen during operation.
This icon means the function explained in this owner's
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Disc
Handling
get
on
playback
by the edges
VCD1.1
side of the disc.
so
that
fingerprints
symbols
DVD video disc.
for instructions
following symbol is
represented by the symbol.
one
to the disc
specific
of the
DVD and finalized DVD±R/RW.
Video CDs with the PBC
(playback control)
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
the surface.
Do not stick paper
that
function.
Do not touch the
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
DivX
DivX disc.
5
Introducin
Front Panel and Rear Panel
STANDBY/ON
STANDBY indicator
MIC
Connect
a
microphone
Lights red when the receiver
is in Standby mode (off).
to MIC
sockets.
DISC
PLAY
Tray
Press and hold down this button about 3
seconds, then press repeatedly
to select
other function.
TUNING(-/+)/
SKIP(-/+)/
KEY CONTROL
(b)/(#)
OPEN/CLOSE button
DISPLAY Window
MONO/STEREO/
PAUSE/STEPSTOP
Power cord
SPEAKER connectors
FM antenna connector
MONITOR OUT connector
AUX IN
66
8
6
6
6
MONITOR
OUT
AUXILIARY INPUT connectors
AM
Do not touch the inner
panel. Electrostatic
damage to the unit.
6
Loop
antenna connectors
pins of the jacks on the rear
discharge may cause permanent
VOLUME
controller
Remote Control Overview
POWER
OPEN/CLOSE
and closes the disc tray.
Opens
DVD/KARAOKE
Select the output
source
(CD/DVD)
AUX
Selects input
or
KARAOKE.
accesses or removes
System's
tuner
To control the TV.
(FM and AM
bands)
enjoy
Select
To
audio language (DVD) or
an audio channel (CD).
or removes
setup
menu
play fast
or
slow.
(LG
forward.
Acknowledges the
playback.
Select programme of TV
Displays the disc's Title
VOLUME
To
SKIP(>)
menu.
Pause
(X)
playback
track number
on
the
mark
on
the
Mute the
speakers.
MARKER
menu.
Marks
a
point during playback.
SEARCH
Repeat chapter, track, title, all.
REPEAT A-B
Displays
Repeats sequence.
SLEEP
MIC
VOL.(V/v)
Adjusts microphone
volume.
ECHO
MARKER SEARCH
Set the
ly
at a
System to turn
specified time.
VOL.(V/v)
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor
sensor
off automatical-
Press to change brightness of the
display window on the front panel during in power-on status.
Remote control
Operation Range
menu.
DIMMER
Adjusts echo volume.
30° in each direction in front of the remote
image.
(x)
PAUSE/STEP
REPEAT
Angle: About
DVD video
PLAY (B)
Starts playback.
MUTE
program
MARKER SEARCH
TV volume.
Stops playback.
frequency into
menu or a
Remote Control
adjust speaker volume and
STOP
CLEAR
a
(+/-)
Enlarges the
the tuner.
Removes
menu, if available.
ZOOM
MEMO.
radio station's
Radio.
TITLE
PROG.
a
or
To tune in the desired radio station.
Search forward*/go to next
chapter or track.
Enter
selection.
TUN(-/+) (b/B):
SKIP(.)
Program
menu
PR/CH(+/-) (v/V):
Search backward*/go to beginning of
current chapter or track or go to
previous chapter or track.
or removes
source.
ENTER
Adjust a vocal range.
(LG karaoke disc only)
Accesses
display.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
b-KEYCON. -#
FORWARD
song of WOMEN's.
Selects the TV's
SLOW-/+(t/y)
REVERSE
a
INPUT
SCAN(bb/BB)
Reverse/ Forward slow
sing
Accesses On-Screen
only)
or
menu.
DISPLAY
karaoke disc
Search backward
highlight the song's subtitle.
To
.
TEMPO(-/+)
To
language (DVD).
FEMALE
DVD disc.
menu on a
a
Selects the sound mode.
MENU
Accesses the
in
SOUND MODE
SETUP
Accesses
subtitle
a
Removes the setup
song of MAN's.
a
options
RETURN
MALE
sing
select numbered
or
SHADOW
AUDIO
To
service, programme number
Selects
enjoy great sound effect.
an
only)
SUBTITLE
XTS
Selects
TV
menu.
sound.
To
a
directly
natural and realistic
more
(LG
0-9 numerical buttons
XTS pro
To
source.
TV
BAND
Select the
(Z)
Remove the
remote
battery
battery
cover on
control, and insert
AAA) batteries
correctly.
with
installation
the
rear
two R03
and
of the
(size
aligned
Caution
Do not mix old and
new
batteries. Never mix different types of batteries
(standard, alkaline, etc.).
7
Introducin
Connections
TV Connections
Make
the
of the
following connections, depending
capabilities of your existing equipment.
one
on
Rear of TV
VIDEO
INPUT
AUDIO INPUT
SCART INPUT
ip
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
R
L
L
best connections.
V
Caution
Make
sure
the DVD/CD Receiver is connected
to the TV. Select the correct AV
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
protection system.
VIDEO Cable
AUX IN
T
MO
Rear of DVD/CD receiver
SCART-RCA
OR
O
Adaptor
Video connection
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
using
the
Rear of DVD/CD receiver
TV/MONITOR
supplied (V).
(SCART type)
Tip:
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
External
Equipment Connections
Connection
Rear of VCR
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
(or
LD
Connect the AUX IN
AUDIO OUTPUT
L
player, etc)
VIDEO
OUTPUT
R
Tip:
Press AUX
these
on
the remote control to select
input
to
jacks.
AV 1 appears
on
the
Display
Window.
AUX IN
66
8
6
6
6
MONITOR
OUT
8
Connections
(Continued)
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
possible
Front
supplied speaker
surround sound,
Center
speaker
(Right)
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
speaker
(Left)
speaker
Prepa tion
AUX IN
66
666
8
MONITOR
OUT
Rear
speaker
(Right surround)
Rear
speaker
(Left surround)
Subwoofer
otes
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
front
speakers
with low maximum
input rating, adjust the volume carefully
to avoid excessive
output
on
the
speakers.
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Connect the AM Loop aerial to the AM aerial connector.
Connect the FM Wire aerial to the FM aerial connector.
AM
FM Wire aerial
Loop
aerial
(supplied)
(supplied)
AUX IN
66
8
6
6
6
MONITOR
OUT
otes
To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
FM Wire
aerial, keep it
as
horizontal
as
possible.
9
Connections
(Continued)
Speaker Positioning
In the
case
of normal
position
the 6
use
speakers (2
front
speakers,
centre
speaker,
2 rear
speakers
and sub-
woofer).
If you want to
subwoofer.
?
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
Front
speakers
According to your listening position
speakers to 45 degree.
set up the
speakers for equal distance. And by hearing position
set up the interval between
Centre
speaker
The centre speakers and front speakers
are
ideally the
same
height.
But
normally place
it above
or
below the television.
Rear
speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround
sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or
above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse
the sound.
In the
rear
?
case
of
speakers
a
smaller
above 60
room
size, if the audience is
90
than the listener's
-
cm
near
to the rear wall set the rear
speakers opposite each other, and
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
10
set the
Before
Mini
Operation
for Audio Stream &
Glossary
Surround mode
Sound Mode
You
DVD
VCD2.0
VCD1.1
CD
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to
enjoy 5.1(or 6)
discrete channels of
high
audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of
quality digital
transparent audio(which
masters)
and results in
identical to the
original
exceptional clarity throughout a
means
degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
true 360
When DVD is inserted
You
change
can
the
Audio
Output
mode
by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
After you select 2 channel
a)
(For example
3 ENG
) by pressing AUDIO button,
button repeatedly.
D
2CH
Bypass
Dolby Digital surround format lets you enjoy up to
5.1 channels of digital surround sound from a Dolby
Digital program source. If you play DVDs with
mark, you can enjoy even better sound quality, greater
spatial accuracy, and improved dynamic range.
Digital
2 ENG
D
2CH
press SOUND
Music
Movie
or
Matrix
The
"
"
After you select 5.1 channel
b)
(For example
1 ENG
D
5.1 CH
or
4 ENG
) by pressing AUDIO button,
DTS
5.1 CH
-"
-
"
press SOUND button.
indicator will be
displayed on the TV screen.
"BYPASS" indicator will be only displayed on the display
window.
(II)
Dolby
Pro
Logic
II creates five full-bandwidth
channels from two-channel
an
sources.
output
This is done
using
advanced, high-purity matrix surround decoder that
extracts the
without
spatial properties of the original recording
adding any new sounds or tonal colorations.
MOVIE mode:
Each time you press SOUND button, the sound mode
of Video CD is changed on the display window in the
following order.
BYPASS
HALL
STUDIO
CLUB
THEATER 1
PL ll MOVIE
CHURCH
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
use
quality
of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for
use
→
→
→
with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
the
→
→
→
The Movie mode is for
approaches
When Video CD is inserted
with any stereo music
ote
After you select the "Bypass" of sound mode by
pressing SOUND button, press AUDIO button.
The Left, Right and Stereo of audio channel will be
displayed on the TV screen.
recordings.
When CD is inserted
MATRIX mode:
Each time you press SOUND button, the sound mode
of Audio CD is changed on the display window in the
following order.
The Matrix mode is the
same as
the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono signals
by making them seem "larger." The Matrix mode may
also find
use
in auto
systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo
simply to force the audio to mono.
reception
may be
BYPASS
HALL
STUDIO
CLUB
THEATER 1
PL ll MOVIE
CHURCH
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
→
→
→
→
→
→
For your reference
?
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
-
-
BYPASS
-
Software with multichannel surround audio
played according
signals
to the way it was recorded.
is
otes
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling
frequency).
When you use a microphone except Karaoke function, you
can't enjoy 5.1 channel output. Only 2 channel sound will
out by the influence of the microphone system.
11
Prepa tion
Before
Operation (Continued)
On-Screen
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
You
display
can
the
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
Press DISPLAY
1
during playback.
Chapter
2Pressv/Vtoselectanitem.
The selected item is highlighted.
Number
1/12
b /
ENTER
Time search
0:20:09
Numbers, ENTER
Audio
Press b / B to
3
use
change
the
the number buttons if
inputting
the title
You
setting.
appropriate (e.g.
number).
For
press ENTER to execute the
some
can
also
A-B
Repeat
title
Repeat
sequence
Resume
Action
play
setting.
Angle
Sound
from this
prohibited
or
b/Bor
AUDIO
functions,
PLAYBACK STATUS/RESTRICTIONS
Title
language
and Digital Audio
Output mode
Subtitle language
point
ABC
1 ENG
otes
If
no
button is
screen
all of the features
pressed for 10 seconds,
display disappears.
b/B
Bypass
Selection Method
the
on-
Track Number
(or PBC mode)
Time search
1/3
Sound
b /
B, Numbers
ENTER
0:20:09
Numbers
ENTER
b/Bor
Audio Channel
12
b/B
Example: On-Screen Display during
playing VCD
not available
provide
b/Bor
SUBTITLE
1/3
Items
Some discs may not
shown below.
B, Numbers
AUDIO
Bypass
b/B
Before
Initial
Operation (Continued)
LANGUAGE
Settings
the Setup menu, you can make various adjustments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see pages 13 to 16.
By using
To
Press SET UP to
display
the
menu.
SET UP will take you back to initial
To go to the next level:
General
2
/
menu
V to
4
/
V to
v
/
V
5
appears.
option
as
then
well
as
alternate
setting
move to
for the
setting(s).
select the second desired
option
the third level.
Disc Menu
Original
Prepa tion
require
or
Select
for the
Setup
menu
setting
and
on-screen
display.
DVD
you prefer for the audio track
subtitles, and the disc menu.
language
was
Refers to the
original language
(disc
in which the
recorded.
Other: To select another language, press number
buttons to enter the
corresponding 4-digit number
according to the language code list on page 31. If you
enter the wrong language code, press CLEAR on the
remote control.
then press
DISPLAY
ENTER to confirm your selection.
Press SET UP
language
Original:
disc
the second level.
to select the desired
Some items
a
audio),
select the desired
then press B to
Use
Off
Disc Audio / Subtitle / Menu
press
The screen will be shown the current
selected item,
3
Select
Select the
B to move to
v
Disc Subtitle
OSD
Operation
The setup
Use
Original
Move
Press SET UP.
Use
Disc Audio
screen.
the remote control.
on
v
English
A second press of
To go back to the previous level:
Press b on the remote control.
1
OSD
and exit the Menu:
display
Press B
LANGUAGE
additional steps.
PLAY to exit the
DISPLAY
setup
menu.
TV
16:9
Aspect
Display
Mode
Widescreen
Move
TV
Aspect
DVD
4:3: Select when
a
16:9: Select when
Mode
Display
Display
Mode
Select
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
upper and
Displays a wide picture with
lower portions of the screen.
Panscan:
Automatically displays
the wide
picture
and cuts off the
portions
that do not fit.
Letterbox:
the entire
screen
bands
on
the
on
13
Before
Operation (Continued)
AUDIO
Distance
Each DVD disc has
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far the
of audio output options.
Set the DVD/CD Receiver's AUDIO options according to
a
variety
the type of audio system you
use.
listener at the
AUDIO
5.1
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
Press b / B to
Select
Speaker Setup
DRC
On
Vocal
On
same
time.
adjust
the Distance of the selected
speaker.
ote
You
Rear
Move
5.1
and
Select
Test
DVD
Speaker Setup
adjust the Distance of Center speaker
speakers (Left & Right) only.
can
Select
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output.
Press b / B to test the
Adjust
of each
signals
speaker.
volume of test signals
the volume to match the
memorized in the system.
Front Left (L)
Center
→
Rear
Right (R)
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
AUDIO
Dynamic Range Control (DRC)
Speaker
Size
DVD
Front L
Small
Volume
0
dB
Distance
2
m
Test
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
Off
Select
thanks to
Move
Return
Enter
technology. However,
dynamic range of the
quietest ones). Then, you may listen to a movie
lower volume without losing dialog intelligibility.
Set DRC to On for this effect.
a
otes
The DRC function works
ote
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
speaker settings
settings.
are
fixed, you cannot change
Volume
Press b / B to
adjust the output
speaker. (-5dB +5dB)
~
level of the selected
depending
only during playback
Dynamic Range Compression
on
may differ
the DVD disc.
DVD
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
mix into
of
recorded discs.
Dolby Digital
The level of
14
audio
and the
at a
speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker,
SubWoofer, Rear speakers (Left), or Rear speakers
(Right))
the
digital
you may wish to compress the
audio output (the difference between the loudest sounds
Speaker
Select
DivX
playing.
a
when
a
multi-channel Karaoke
normal stereo sound.
on
the disc will
Before
LOCK
Operation (Continued)
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
****
Country
1
2
Code
can
3
highlighted.
Enter the new 4-digit code,
Input it again to verify.
4
Press SET UP to exit the
control information
certain
scenes on
that may not be suitable
of these discs contain parental
scenes
Many
that applies
to the
complete
the disc. Movies and
disc
scenes are
or
1
to
rated
control feature allows you to block access
below the rating you input, thereby preventing
parental
to scenes
your children from being able to view material you
believe is unsuitable.
1
2
Select
"Rating"
on
the LOCK
menu
then press
forget your Security
Input
the
6-digit number
security code is
and the
2
Enter
a new
code
the
Rating,
Password and
Code features, you must input the
security code you created.
If you have not yet entered
prompted to do so.
a
security
Country
4-digit
code you
are
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3Selectaratingfrom1to8usingthev/V
buttons.
Rating 1-8: Rating
and rating eight (8)
one
(1)
When
"
"210499"
on
clear it
using
the setup
menu
cleared.
"
appears on the TV screen,
and then press SET UP to move to the
INPUT PASSWD
press STOP
(x)
menu.
Country
Code
DVD
country/area
whose standards
used to rate the DVD-Video disc, based
in the reference chapter.
were
1
2
3
has the most restrictions
is the least restrictive.
can
described above.
as
Enter the code of the
access
Code
ote
setup
B.
To
menu.
If you forget your security code you
the following steps:
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The
then press ENTER.
Select
DVD
for children to view.
change password.
Select Password on the LOCK menu then press B.
Follow step 2 as shown left (Rating). "Change" or
If you
Some movies contain
enter or
"New" is
Move
Rating
(Security Code)
Select
"Country Code"
on
the LOCK
on
the list
menu
then
press B.
Follow step 2
as
shown left
Select the first character
Shift the
(Rating).
using
v
/
V
buttons.
using B button and select
character using v / V buttons.
cursor
the
4
second
5
Press ENTER to confirm your country code
selection.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the DVD/CD Receiver, all disc
scenes with the same rating or lower are played. Higher
rated
scenes are
is available
on
not
played
unless
an
alternate
scene
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
same
4
Press ENTER to confirm your
rating selection,
then press SET UP to exit the
menu.
15
Prepa tion
Before
Operation (Continued)
OTHERS
?
Display
the number which you
can
OTHERS
PBC
?
On
This rental video has 7 views left. A view
ends when you
Select
DivX(R) Registration
video,
or
stop playback, play
turn off your
Do you want to
use one
of your 7 views
Set
No
expired.
This rental is
VCD
Playback Control (PBC)
expired.
to On or Off.
?
On:Video CDs with PBC
now
Select
Move
PBC
The rental has been
different
player.
Yes
?
a
played according
are
to the
Display
the authorization
error.
PBC.
Off:Video CDs with PBC
played
are
the
same
way
as
Audio CDs.
DivX(R) Registration
You
can
DivX
show the DivX DRM
Management) Registration
Your
Please
the
registration
use
DivX(R)
(Digital Right
code for your unit
code is
this code to
the
To learn
XXXXXXXX
register this player with
Video On Demand service.
This will allow you to rent and
using
:
only.
DivX(R)
more
purchase
videos
Video On Demand format.
go to www.divx.com/vod
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
The
an
encrypt movie file.
ote
If you rent the DivX VOD file, it has several
viewing limits as show below.
16
options
of
This video
player
play
is not authorized to
this video.
watch the file.
DVD
or
Playing
Video CD
a
DVD and Video CD
Playback Setup
Turn
on
Operation
DVD
VCD2.0
the TV and select the video
General Features
VCD1.1
input
ote
source con-
nected to the DVD/CD Receiver.
Unless stated otherwise, all operations described
the remote control. Some features may also be
available
Audio system: Turn on the audio system
and select the input source connected to the
DVD/CD Receiver.
Moving
has
Press OPEN/CLOSE
1
(Z)
to open the disc
tray.
menu.
to another TITLE
than
more
Setup
one
title, you
DVD
can move
When
a
disc
to another title
Press DISP., then press the appropriate numbered
button (0-9) to select a title number.
facing
up.
When a double-sided DVD is inserted, make
the side you want to play is facing down.
Press OPEN/CLOSE
3
READING appears
starts
(Z)
to close the
sure
Moving
tray.
the TV screen, and playback
If playback does not start,
automatically.
menu
might
When
The
a menu screen
is
DVD
or
loading
a
the
operating procedures for
depending on the disc.
menu screen.
otes
If Parental Control is set and the disc is not within the
the
4-digit
(see
page 15).
region code.
on
Your receiver will not
play
code different from your receiver. The
this player is 2 (two).
using
the numbered buttons
1
3
Press SLOW -/+
The
player
(0-9).
the numbered buttons
VCD2.0
DVD
during
VCD1.1
pause.
will enter SLOW mode.
Use the SLOW -/+ to select the
1/16, t 1/8, t 1/4
1/16, T 1/8, T 1/4
or
t 1/2
or
T 1/2
required speed: t
(backward), or T
(forward).
To exit slow motion mode, press PLAY.
ote
Slow motion
discs that have
to another
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
can move
or a
>
Slow Motion
2
You also may set PBC to Off under setup.
Rating settings (not authorized),
chapter
ote
menu screen.
may differ
Follow the instructions on the each
one
follows:
two-digit numbers, press
(0-9) in rapid succession.
and the exact
menu
track, you
For
menu screen.
Use the number buttons to select the track you want
to view.
using
than
press DISP. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
VCD2.0
setting
one
more
briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
number
Press RETURN to return to the
disc has
than
or
Use the bBvVbuttons to select the title/chapter you
want to view, then press ENTER to start. Press TITLE
Menu
more
Press .
DVD
DVD MENU to return to the
on a
as
displayed
may be displayed first after
Video CD which contains a menu.
title
DivX
chapter/track
appear
menu screen
a
disc has
instead.
If
to another CHAPTER/TRACK
VCD2.0
DVD
on
press PLAY.
In some cases, the disc
or
the
follows:
as
Load your chosen disc in the tray, with the label
2
on
use
playback
in
reverse
is not
applicable
for
Video CD.
region
region code
a
for
17
Operation
DVD
or
Video CD
General Features
Still Picture and
VCD2.0
DVD
(continued)
Frame-by-frame playback
during playback.
The DVD/CD Receiver will
now
go into PAUSE
mode.
2
You
advance the
picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.
can
Search
Press m
1
VCD2.0
DVD
or M
2
3
or M
DVD-Video discs
To repeat the
REPEAT.
The
2
VCD2.0
-
Repeat Off icon appears
the TV
the TV
screen.
screen.
REPEAT
a
third
on
To repeat the disc currently
REPEAT a second time.
The
Repeat
To exit
screen.
currently playing, press
Repeat Track icon appears
All icon appears
on
the TV
Repeat mode, press
screen.
playing, press
the TV
screen.
REPEAT
a
third
time.
The
Repeat Off icon appears
on
the TV
screen.
ote
On
Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page
a
16.
18
a
title:
Press A-B at your chosen
A- appears
briefly
Press A-B
on
the TV
starting point.
screen.
at your chosen end point.
A-B appears briefly on the TV screen, and the repeat
sequence
again
begins.
To cancel the sequence, press A-B.
DVD
1
Press DISP.
during playback.
play appears
on
the
The
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing time of
the current disc.
seconds, press 3/4
Within 10
2 Search
icon in the
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Within 10
seconds,
enter the
required
use
the number buttons to
start time. Enter
hours, min-
utes, and seconds from left to right in the box.
remove
num-
bers.
Repeat Track/All/Off
To repeat the track
REPEAT.
3
on
the TV
on
sequence in
VCD1.1
The Time Search function allows you to start
any chosen time on the disc.
DivX
playing, press
on
a
VCD2.0
DVD
If you enter the wrong numbers, press CLEAR to
the numbers you entered. Then enter the correct
time.
The
3
3
currently playing chapter, press
Repeat mode, press
-
2
Repeat Chapter/Title/Off
Repeat Title icon appears
Video CDs
2
VCD1.1
Repeat Chapter icon appears
To exit
The
1
to select the
repeatedly
To repeat the title currently
REPEAT a second time.
The
3
go into SEARCH mode.
now
To exit SEARCH mode, press PLAY.
Repeat
1
VCD1.1
required speed: mX2, mX4, mX8, mX16,
mX100 (backward) or MX2, MX4, MX8,
MX16, MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8, mX16 (backward) or
MX2, MX4, MX8, MX16 (forward).
DVD
To repeat
A-B
Time Search
during playback.
The DVD/CD Receiver will
Press m
Repeat
1
VCD1.1
Press PAUSE/STEP
1
Operation (Continued)
4
Within 10
seconds, press ENTER
to confirm the
start time.
starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
Playback
point.
DVD
Video CD
or
General Features
Marker Search
You
can
nine
start
points
To enter
a
Operation (Continued)
(continued)
DVD
playback
from
Special
VCD2.0
the contents of DVD Video
discs: Menus
point. Up
to
be memorized.
can
DVDs may contain menus that allow you to access
special features. To use the disc menu, press MENU.
Then, press the appropriate number button to select an
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press ENTER.
mark, follow these steps.
During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear
the TV
screen
briefly.
1 to enter up to nine Marker
Repeat step
on a
on
points
disc.
To Recall
During
Marked Scene
2
The MARKER SEARCH
menu
will appear
seconds, press 1/2
on
the
screen.
scene.
During
a
menu can
list
menu
may appear.
angles, spoken lanoptions, and chapters for the
camera
guage and subtitle
title.
The disc
DVD
menu
is
displayed.
the MARKER SEARCH menu, press
SEARCH.
To clear
menu, the menu will appear on
Press MENU.
will start from the Marked
remove
The
a
Otherwise, the disc
screen.
Disc Menu
Press ENTER.
To
If the current title has
to select a Marker
number that you want to recall.
Playback
DVD
Press TITLE.
the
playback, press SEARCH.
disc
Within 10
Title Menu
1
a
DVD
Checking
memorized
a
DVD Features
Changing
menu
Language
Press AUDIO repeatedly during playback to hear
different audio language or audio track.
playback, press SEARCH.
The MARKER SEARCH
DVD
DivX
Marked Scene
disc
the Audio
will appear
on
the
a
screen.
the Audio Channel
Press 1/2 to select the Marker number that you
Changing
want to erase.
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT or RIGHT).
Press CLEAR.
VCD2.0
VCD1.1
The Marker number will be erased from the list.
ote
2 and 3 to erase additional Marker
Repeat steps
If
appears, the feature is not available
on
the disc.
numbers.
To
remove
the MARKER SEARCH menu, press
SEARCH.
Zoom
VCD2.0
DVD
VCD1.1
during playback
or
still
playback
activate the Zoom function.
If you press ZOOM
DVD
DivX
Press S-TITLE repeatedly during
different subtitle languages.
playback
to see the
otes
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
Press ZOOM
Subtitles
to
The subtitle file of the DivX file is displayed only smi,
srt and sub.
If there is no information or there is a code that can
not read in the DivX file, "1/1" etc are displayed.
repeatedly, the magnification level
increases up to four steps.
100% size
→
1600% size
Use the 1 2
zoomed
400% size
→
→
800%
→
100% size
3 4
buttons to
move
through
the
picture.
ote
The
zoom
function may not work for
some
DVDs.
19
Operation
Audio CD
Playing
Disc
an
CD
MP3/WMA Disc
or
Operation
Audio CD and MP3/WMA
MP3
Repeat
You
WMA
can
Track/All/Off
play
title/chapter/all/track
a
1 Press REPEAT when
The DVD/CD Receiver
recordings
CD-ROM, CD-R,
on
MP3/WMA formatted
play
can
or
CD-RW discs.
2 Press REPEAT to select
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
?
1/12
Audio CD
List
Program
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
playing
a
MP3
WMA
disc.
on a
disc. The repeat icon
appears.
?
0:00:00
CD
?
desired repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on a disc.
does not
Off(No display):
Search
CD
1 Press m
or
MP3
play repeatedly.
WMA
Mduring playback.
The receiver will
2 Press m
a
now
M
or
go into SEARCH mode.
repeatedly
to select the
speed: mX2, mX4, mX8 (backward)
MX4, MX8 (forward).
required
or
MX2,
3 To exit SEARCH mode, press PLAY.
MP3 / WMA
1.
Press v / V to select
see
2.
a
folder, and press ENTER to
the folder contents.
MP3 / WMA disc
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
with this
player
48
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32- 192kbps (WMA)
kHz
(MP3),
The DVD/CD Receiver cannot read
an
limited
?
as
compatibility
is
follows:
within 32
-
-
0:00:00
1/104
?
MP3
List
Program
?
1-Music1
-
MP3/WMA
2-Music2
file that has
3-Music3
file extension other than
a
4-Music4
".mp3"
/
".wma".
5-Music5
6-Music6
?
7-Music7
?
otes
to the next page.
CD with MP3/WMA file and JPEG file, you can
switch MP3/WMA and JPEG menu. Press TITLE and
a
MP3/WMA
JPEG word
or
lighted. Then,
use b
menu
is
high-
/ B to select MP3/WMA
or
JPEG
on
top of the
then press ENTER.
Pause
CD
WMA
playback,
PAUSE/STEP again.
track
or
or
to return
or
20
incorporate
They
should not
briefly
to
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
The total number of files
on
the disc should be less
than 999.
requires
discs and
recordings
CD
step back
to the
optimal playback quality. Pre-recorded DVDs
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MP3
WMA
to the next
track.
previous
track.
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
should have
must
are
press
briefly during playback to go
to the beginning of the current
case
names
achieve
>
Press . twice
In
press PLAY
to another Track
Press .
?
File
system.
to meet certain technical standards in order to
during playback.
2 To return to
Moving
playback MP3 / WMA files. We recyou use Easy-CD Creator, which cre-
This DVD/CD Receiver
MP3
1 Press PAUSE/STEP
to
ates an ISO 9660 file
?
On
format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
ommend that
and press ENTER.
move
physical
impossible
If you are in a file list on the MP3/WMA menu and want
to return to the Folder list, use the v / V to highlight
Press MENU to
CD-R
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
from the
copyright
owner.
JPEG Disc
Viewing
a
Operation
JPEG disc
JPEG
JPEG disc
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
This unit
1
as
can
Insert
disc and close the tray.
The JPEG menu appears on the TV
notes on
?
a
with this
is limited
player
follows:
upon the size and number of JPEG
files, it could take a long time for the DVD/CD
Receiver to read the disc's contents. If you don't
Depending
after several minutes,
some of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
see an on-screen
screen.
display
Operation
---
JPEG
2048
List
compatibility
Preview
pixels
and burn another disc.
JPEG Folder 1
?
JPEG Folder 2
The total number of files and folders
on
the disc
JPEG Folder 3
should be less than 999.
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
?Some discs may be incompatible due to
recording format or the condition of disc.
JPEG Folder 7
JPEG Folder 8
?
2
Press
v
/
select
a
and press ENTER.
folder,
A list of files in the folder appears.
If you are in a file list and want to return to the
previous
Folder list,
remote to
3
V to
the v / V buttons
use
the
on
and press ENTER.
highlight
If you want to view a particular file, press v / V
to highlight a file and press ENTER or PLAY.
While
to the
viewing a file, you can press STOP
previous menu (JPEG menu).
to move
copying
into the
".jpg"
CD layout.
If the files have
rename
?
different
Ensure that all the selected files have the
extensions when
?
a
File
them
without
names
to be read
the files
by
are
Windows
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
".jpg"
extension will not be able
this DVD/CD Receiver. Even
shown
as
JPEG
image
though
files in
Explorer.
ips
?
?
There
four Slide
:
Speed options
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
are
SLIDE SHOW
Use vVbBto
press ENTER.
JPEG
highlight
STILL PICTURE
1.
to
the
(Slide Show)
then
JPEG
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide show, press PLAY
PAUSE/STEP again.
(.
or
>)
to advance to the next or
once
previous
TO ROTATE PICTURE
Press
b / B
while
during showing
a
press
JPEG
MOVING TO ANOTHER FILE
Press SKIP
or
viewing
a
picture
file.
JPEG
picture
to rotate the
pic-
ture clockwise or counter clockwise.
21
Programmed Playback
CD
MP3
WMA
The program function enables you to store your favorite tracks from any disc in the receiver memory. A program
contain 300 tracks.
1
Insert
a
disc.
REPEAT PROGRAMMED TRACKS
1.
Audio CD and MP3/WMA Discs:
Audio CD
or
MP3/WMA
menu
appears
as
1/12
0:00:00
Audio CD
Press REPEAT when
below.
Press REPEAT to select
a
disc. The repeat
desired repeat mode.
JPEG
?
Program
a
1/104
MP3
List
playing
icon appears.
2.
0:00:00
can
Program
List
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Music Folder 6
Track7
Track1
Track8
Track10
?
?
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
Music Folder 7
ERASING A TRACK FROM "PROGRAM"
Music Folder 8
LIST
Audio CD Menu
2
Select
or
a
track
"
on
MP3/WMA Menu
1.
place
Repeat
to
2.
(Add)"
place
additional tracks
on
can
add all tracks in the disc. Select
"
icon
(Add All)"
5
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
Repeat
to erase additional tracks on
or
ENTER to start.
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
"Program"
list have
To
normal
resume
ERASING THE COMPLETE PROGRAM
Use v / V to select
"
(Del all)",
then press ENTER.
ote
Press PLAY
back, select
a
played
track
on
in
the
once.
playback
from
programmed playof AUDIO CD (or MP3/WMA)
list and then press PLAY.
22
list.
LIST
page.
4
Press CLEAR. Or, select
(Delete)" icon then
press ENTER to place the selected track on the
the list.
then press ENTER.
3
"
Program
the list.
ote
You
erase
the "List", then press PROGRAM
icon then press ENTER to
the selected track on the "Program" list.
select
Use vVto select the track that you wish to
from the Program list.
The programs
are
also cleared when the disc is removed.
DivX Disc
Using
Operation
this DVD/CD Receiver you
can
play
DivX disc.
DivX disc
disc and close the tray. The DivX
appears on the TV screen.
Insert
1
a
0:00:00
menu
as
compatibility
with this
player
is limited
follows:
?A vailable resolution size of the DivX file is under
720x576
1/12
(W
x
H) pixel.
DIVX
?
List
The file
name
of the DivX subtitle is available
20~40characters
Movie Folder 1
Movie Folder 2
Movie Folder 3
?
Movie Folder 4
Movie Folder 6
Movie Folder 8
?
2
impossible code to
may be displayed as
a
folder, and press ENTER. A
?
list of files in the folder appears. If you are in a file
list and want to return to the Folder list, use the v /
V buttons on the remote to
and press
highlight
ENTER.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
_
If the video and audio structure of recorded file
is not interleaved, either video
or
PLAY.
or
audio is out-
putted.
?
If the file is recorded with
*
Press STOP to exit.
4
"
If the number of the screen frame is over 30 per
1 second, this unit may not operate normally.
ports
3
"
express in the DivX
mark on the dis-
play.
Movie Folder 7
Press v / V to select
(different by language).
If there is
file, it
Movie Folder 5
by
some
of
1-point
unit supof the record level.
GMC, the
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.
otes
?
Be
sure
DivX file
?
?
?
to select "SUBTITLE ON" mode before
playback
ENTER every time.
When the subtile has more than two languages in the
a
by pressing
file,
original subtile is only available.
The Pro logic II Sound mode is not available for DivX file.
Subtitle in Chinese will not be displayed during play a DivX
file. (Subtitle in English is available)
Playable
z ".avi ",
DivX file
".mpg ", ".mpeg
Playable Codec
"
format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz
?
-
within 24
?
Bit
40
(MP3),
48kHz
(WMA)
rate: within 32 320kbps (MP3),
192kbps (WMA)
-
-
-
23
Operation
Additional Information
Last Condition
Memory
Controlling
DVD
This DVD/CD Receiver memorizes the
user
for
settings
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
If you load
memorized, the latest stop
switch off the
player.
tings
ly recalled.
a
the TV
Your remote control is
DVD/CD Receiver
as
capable
well
of
operating
your
limited functions of LG TV.
as
Follow the instructions below to operate for your LG TV.
disc that has its set-
position
is automatical-
1
the remote control, press the TV to
select the device to be operated.
Before
using
To switch the remote control mode
different
device),
be
(to operate
a
to press the TV first.
sure
otes
Settings
are
stored in memory for
use
any time.
This DVD/CD Receiver does not memorize
settings
of
disc if you switch off the DVD/CD Receiver before
commencing to play it.
2
POWER, CH(E/D), VOLUME (+/-), and INPUT
buttons on remote control are used to operate the
The
LG TV.
a
Remote Control Codes for LG TV
Hold POWER and press PR/CH(+/-)
repeatedly until the TV on or off.
Screen Saver
The
Setting
appears when you leave the DVD
mode for about five minutes. If the
(E/D)
button
screen saver
player
in
Stop
Screen Saver is
displayed
Player automatically turns
System
ote
If the remote control does not
for five minutes, the DVD
itself off.
TV, try the other code
originally supplied
Due to the variety
Select
You must select the
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold P/STEP on the front panel or remote
control for
more
than 5 seconds to be able to select
system (PAL, NTSC
or
a
AUTO).
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi
NTSC:
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
24
or use
operate your particular
the remote control
with the LG TV.
of codes used
by manufacturers,
OUR COMPANY cannot guarantee that the remote
control will operate every model of LG TV.
Operation
Presetting
You
can
tuning,
with Radio
the radio stations
preset 50 stations for FM and AM (MW). Before
make
sure
that you have turned down the vol-
Preset radio stations in the DVD/CD Receiver's memory
first (see "Presetting radio stations" on the left).
ume.
Press BAND
on
the remote control until FM
or
1
AM
2
And then every time you press BAND, FM and
AM (MW) changes alternately.
3
(MW) appears
in the
display
Press and hold TUNING
appear in the
then
4
5
6
A
stereo
on
a
program)
PR(D/E)
on
the remote control.
Press
PR(D/E) repeatedly
to select the
select another function mode
Use manual
remote
the remote control
again.
or
(DVD/CD, AUX, etc.,).
automatic
tuning
in
tuning, press TUN- b
control repeatedly.
step
or
2.
TUN+
on
the
press and hold TUN- b or
TUN+ for about two seconds on the remote control.
To select
You
station with
Press TUNING
a
weak
tuning,
to tune in the station
in
step 3
manually.
Press and hold PROG./MEMO. for about two seconds
in the
display window
PROG./MEMO. again, the stations are
appeared
can use
(within
If you have accidentally entered into the "CLEAR ALL"
and you do not wish to clear the memory, do not
press any key. After a few seconds, the "CLEAR ALL"
itself and
change
to mode.
3
on
the remote control
seconds).
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
by
the number buttons
preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9
To clear all the stored stations
and "CLEAR ALL" is
preset radio station directly
a
to select a
signal
repeatedly
or
will go off
want.
3 to 6 to store other stations.
Repeat steps
display
or
For automatic
and then press
cleared.
preset station you
To turn off the radio
Press PROG./MEMO.
a
the remote control
-
For manual
To tune in
on
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
the preset number you want.
The station is stored.
7
window.
To listen to non-preset radio stations
the remote control to select
on
FM appears in the
Press POWER to turn the DVD/CD Receiver off
preset number will flash in the display window.
Press
or
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3
display window.
Press PROG./MEMO.
2
until the
when the DVD/CD Receiver tunes in
(for
display
on
release.
station. "TUNED" and "STEREO"
1
(MW)
The last received station is tuned in.
or
panel for about two seconds
frequency indication starts to change,
Scanning stops
Press BAND until AM
window.
the front
to the radio
Listening
in the
effect, but
the button
again
on
noisy
the front
panel
so
that "ST."
display window. There will
the reception will improve.
be
no
Press
to restore the stereo effect.
To
improve reception
Reorient the supplied antennas.
ote
If all stations have
been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To
change
already
the preset number, follow the steps 5-6
as
above.
25
Operation
Other Functions
XTS
Sleep
Timer
You
set the DVD/CD Receiver to turn off automati-
can
cally
at a
Setting
specified
time.
Press SLEEP to set the desired
The SLEEP indicator and
sleep
sleep time appears
time.
in the dis-
play window.
Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 →150 →120→90→80→70 →60→50→
40→30→20→10 →OFF
You
(Excellent
enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS-1→XTS-2→XTS-3→NORMAL...
Tips:
XTS- 1:
When
sound
XTS- 2:
high display
source
front
You
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator flashes in the display
window.
of sound at woofer
effect
via the
by playing the sound
rear speakers same as the
speakers.
can
operate both XTS-
1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
woofer at the XTS- 2 mode.
repeatedly.
Mute
sense
for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
playing the movie with the weak bass
relatively to the general music, it
enforces the
XTS- 3:
Dimmer
Sound)
can
ote
You can check the time remaining before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
True
ote
The XTS- 2 mode is
from 2.1 CH to 5.1
temporarily disabled when changing
CH and it is enabled when changing it
to
2.1 CH.
XTS pro
The unique sound quality of the LG Technology creates
the optimum sound for you to play the perfect playback
of the original sound and to feel the living sound source.
Each time you press XTS pro the
the following order.
XTS-P ON
26
→
XTS-P OFF
setting changes
in
KARAOKE
You
can
You
can
Operation
play KARAOKE (singing along) with karaoke disc by connecting a microphone to the unit.
enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer's
Karaoke Basic
1
2
3
Check if the system is connected.
(Refer to the page 10-12.)
To
Turn on the powers of TV (or Amplifier) and DVD
Karaoke and enter to the video mode on TV.
Press OPEN/CLOSE
and load
the label
4
Karaoke Advanced
Playback
to open the disc tray
karaoke disc in the tray with
(Z)
supplied
facing up.
Press OPEN/CLOSE
(Z)
to close the
Adjust MIC
[TV Screen]
Playback
Volume
Press the MIC
increase the
VOL.(v/V) on the remote control to
microphone volume or to decrease it.
(0~15steps)
To
Adjust ECHO
You
can
give an
microphones.
tray.
voice.
Volume
echo effect to the sound from the
Press the ECHO
VOL.(v/V)
increase the echo volume
the remote control to
to decrease it. (0~15
on
or
steps)
Key Control
You
change the key to suit your vocal range.
You can adjust the key to 13 steps (6steps higher,
6steps lower and the original key).
The setting appears on the screen.
can
-
Press b- KEY CON.
-
# buttons
remote control to find the
key
repeatedly
on
the
that suits your vocal
range.
5
6
Connect the
microphone
key one by one, press the
TROL (b) repeatedly during playback.
KEY CON-
To
KEY CON-
sharp the key one by one, press the
TROL (#) repeatedly during playback.
jack.
Select the
melody
number you want
by pressing
NUMERIC buttons.
If you cancel the selected
the CLEAR.
7
to the MIC 1 or MIC 2
To flatten the
melody number,
original key, press the KEY CONTROL (b/#) repeatedly to appear the original key.
To return to the
press
Press PLAY.
The selected
melody number is played.
Sing in tone with microphone.
After melody ends, it is stopped automatically
score
and
appears.
ote
When you use a microphone except Karaoke function, you
can't enjoy 5.1 channel output. Only 2 channel sound will out
by the influence of the microphone system.
27
Operation
KARAOKE
Reserving
Operation
the
Karaoke MENU
Songs
When you want to make a reservation of next melody,
you can enjoy the most 8 melodies reservation
Preparation
Without
The main MENU appears
1
2
3
waiting.
Press the NUMERIC buttons to
melody number you want
play mode.
Melody number appears on
Press DISC MENU
on
Main MENU
reserve
Playback
the karaoke mode.
the
on
(On
screen.
the TV
screen)
in the karaoke disc
the TV
screen.
Press PROGRAM.
The
melody
number is made
Repeat steps
You
a
reservation.
1-2.
can reserve
8 songs.
ip
After the
will be
one
song finishes its
playback,
the next song
playback automatically.
To cancel the reserved song
Each time you press CLEAR, the reserved song will be
cancelled one by one.
To cancel
or
change
Press the PROGRAM to
the wrong reserved song
move
to the desired
SETUP
1
2
(
)
Select
by pressing
v / V on the main
menu.
Use b / B to select the desired
option,
and
press ENTER.
position,
then press the CLEAR to cancel the reserved song.
Male/Female Function
If you want to sing a song of MAN's or WOMEN's key,
press MALE/FEMALE button repeatedly to change
MAN's
or
WOMEN's
key.
Tempo Change
You
can use
this function when you want to
play
fast
or
SCORE On/Off (
:
slow.
When
Press TEMPO
+
repeatedly during singing
to
play
faster.
?
Press TEMPO
-
repeatedly during singing
slower.
selection of
singing by
comes
?
)
out after one
piece
To cancel it, select the
FANFARE On/Off
Shadow Function
:
caption and the song's subtitle are mixed
up, the song's subtitle may be invisible. In this case, to
highlight the song's subtitle, press SHADOW.
It will be highlighted by background shadow image.
screen
.
(
)
In condition of POWER
singing
score
song
of song is ended.
ON, scoring fanfare
operates. The fanfare sound
If the
melody,
comes
out after
finished.
To cancel it, select the
.
-
LYRIC On/Off (
:
When
)
singing by
appears
on
selection of
the TV
melody,
.
CHORUS On/Off (
When
rus
)
singing by
is heard
a
lyric
screen.
To cancel it, select the
:
song
selection of
melody,
song cho-
sound.
To cancel it, select the
.
ote
To
28
move
to the main menu, press MENU or RETURN.
KARAOKE
MUSIC LIST
Operation
(
SINGER LIST
)
1 Select
and
(
)
""
singer you
want
a nd
select the initial of the
by pressing
the v / V, and press
ENTER.
Select
1
"
"bypressingthev/Von
the main
menu.
The
and
shown
on
the TV
menu
Operation
will be
screen.
2 Select the
singer you
want
by pressing
the v / V,
and press ENTER.
2
Select
""
or
""
by pressing
the v / V, and press ENTER.
and
menu
will
be
sho
3 Select the song title of the singer you want
pressing the v / V, and press ENTER.
SONG LIST
1 Select
(
)
""
song title
press E
you
by
want
and select the initial of the
by pressing the
v
/
V, then
ote
To
move
the
previous mode,
select the
by pressing
the v / V, then press ENTER.
i
2 Select th
l
b
igthev/
V, and
29
KARAOKE
RANDOM
1
Select
Operation
(
)
"
5
"bypressing
the main
Select number you want
menu.
6
7
2
a
red team
When
targeted winning number,
reaching
""
enjoy
a
song game
main
"
"bypressingv/Vonthe
menu.
It appears
2
Select
select
as
below.
""
one
of
bypressingv/V,and
NUMERIC buttons 1~9by pressing
b / B to select winner's
number, then press
ENTER.
3
Select
one
""
of 60,70,80
success
4
or
by pressing v / V, and select
90 by pressing b / B to select
score, then press SELECT/ ENTER.
Select "START"
by pressing
ENTER.
It appears
as
below.
0
30
blue team
the
will be shown on the TV screen.
as
below.
dividing by
two teams of red team & blue team.
1
the
or
)
function which
Select
accompaniment.
begin randomly.
CHALLENGE(
It has
with the
Repeat step 4~5.
Change the team of
alternately.
It appears
Press ENTER to
v / V and
press ENTER.
Sing along
v/Von
by pressing
0
v /
V, then press
8
Whether you
select
below.
keep going
""
or
""
the song game
or
not,
bypressingv/Vas
Language
Use this list to
Codes
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
following
initial
settings:
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Finnish
7073
Macedonian
7775
Slovenian
8376
Afar
6565
French
7082
7771
Somali
8379
Afrikaans
6570
Galician
7176
7783
Spanish
6983
Albanian
8381
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Ameharic
6577
German
6869
Maltese
7784
Swahili
8387
Arabic
6582
Greek
6976
Maori
7773
Swedish
8386
Armenian
7289
Greenlandic
7576
Marathi
7782
8476
Assamese
6583
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tamil
8465
Bashkir
6665
Hausa
7265
Nauru
7865
Tatar
8484
Basque
Bengali; Bangla
6985
Hebrew
7387
7869
Telugu
8469
6678
Hindi
7273
7879
Thai
8472
Bhutani
6890
Hungarian
7285
7982
Tibetan
6679
Bihari
6672
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Cambodian
7577
Japanese
7465
Quechua
8185
Ukrainian
8575
Catalan
6765
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Chinese
9072
Kannada
7578
Rumanian
8279
Uzbek
8590
Corsican
6779
Kashmiri
7583
Russian
8285
Vietnamese
8673
Croatian
7282
Kazakh
7575
Samoan
8377
Volapuk
8679
Czech
6783
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Danish
6865
Korean
7579
Scots Gaelic
7168
Wolof
8779
Dutch
7876
Kurdish
7585
Serbian
8382
Xhosa
8872
English
Esperanto
6978
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
6979
Latin
7665
Shona
8378
Yoruba
8979
Estonian
6984
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Faroese
7079
Lingala
7678
Singhalese
8373
Fiji
7074
Lithuanian
7684
Slovak
8375
Country
Choose
a
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech Republic
Denmark
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
31
Operation
Troubleshooting
Check the
following guide
for the
possible
cause
a
before
problem
contacting
No power.
?
The power is on, but
the DVD/CD Receiver
does not work.
picture.
?
Correction
The power cord is disconnected.
?
No disc is inserted.
?
?
The TV is not set to receive DVD
signal
?T he video cable is not connected
?
?
securely.
?
sound or
only a very low-level
sound is heard.
no
?
The connected TV power is turned off.
?
?
is poor.
The DVD/CD Receiver
does not start playback.
into the
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
The equipment connected with the
audio cable is not set to receive DVD
The audio cables
not connected
are
?
?
Connect the video cable into the
jacks
?
on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
?Connect the audio cable into the
jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
Select the appropriate video input mode
on the TV so the picture from the DVD/
CD Receiver appears on the TV screen.
?T urn
securely.
playback picture
securely
securely.
signal output.
?
The
the power cord
wall outlet.
Plug
lit.)
output.
There is
service.
Cause
Symptom
No
of
connecting
The disc is
cable is
damaged.
dirty.
?T urn
the equipment connected with
the audio cable.
?
?
No disc is inserted.
?
on
it with
Replace
new one.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
?
?
?
?
An
unplayable
The disc is
placed upside
The disc is not
The disc is
?Amenu is
disc is inserted.
placed
?
down.
within the
?
guide.
dirty.
on
the TV
?
?
?
screen.
Insert
disc. (Check the disc
type, colour system and Regional code.)
a
playable
Place the disc with the
down.
playback
Place the disc on the disc tray
inside the guide.
side
correctly
Clean the disc.
Press the SET UP button to turn off the
menu screen.
?
Loud hum
heard.
or
noise is
?
?
?
?
32
The
Rating
The
plugs
level is set.
and
The disc is
jacks
are
?
?W ipe them with
cloth
tened with alcohol.
dirty.
dirty.
The speakers and components
connected poorly.
Cancel the Rating function
the rating level.
?
are
The DVD/CD Receiver is located too
close to the TV.
?
a
or
change
slightly
mois-
Clean the disc.
Connect the
speakers
and components
securely.
?
Move your TV away from the audio
components.
Troubleshooting (Cont'd)
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
Correction
positioned
or
connected
poorly.
?
?
?
The signal strength of the stations is too
weak (when tuning in with automatic
Connect the antenna
securely.
the antennas and connect
external antenna if necessary.
Adjust
?T une in the station
an
manually.
Refrnce
tuning).
?
No stations have been preset or preset
stations have been cleared (when
?
Preset the stations
(page 25).
tuning by scanning preset stations).
The remote control
does not work properly.
?T he remote control is not
?
?
display
?
remote sensor of the DVD/CD Receiver.
?
The front panel
is too dim.
pointed
at the
?
The remote control is too far from the
DVD/CD Receiver.
There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
The batteries in the remote control
flat.
Nothing
display.
is
displayed
on
the front
?
?
are
?
panel
?
Point the remote control at the remote
sensor of the DVD/CD Receiver.
Use the remote control within about 23
ft (7 m).
Remove the obstacle.
Replace
the batteries with
Press DIMMER
on
new ones.
the remote control.
33
Specifications
Power
Power
Refer to main label
Mass
Gen ral
External dimensions
CD/ VD
FM
Tuner
Refer to main label
supply
consumption
AM
[MW]
(W
x
H
x
D)
kg
360
x
56
x
Laser
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL 625/50, NTSC 525/60
0.5 %
Video output
1.0 V
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
30W+30W(6Ωat1kHz,THD10%)
Front: 30W + 30W (THD 10 %)
More than 75 dB
Designs
34
status: Horizontal
wavelength
650
nm
(1 kHz, NOP-3dB,
20 kHz
LPF/A-Filter)
More than 80 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
108.0 MHz
-
or
65.0
-
74.0 MHz, 87.5
108.0 MHz
-
10.7 MHz
60 dB
140
522
-
-
(Mono)
10,000 Hz
1,620 kHz
or
520
-
1,720 kHz
450 kHz
Centre*: 30W
Outputs
MONITOR
Surround*: 30W
+
Subwoofer*: 70W
1
Type
Impedance
Frequency Response
30W
(8Ω
(6Ω
at 30
at 1
kHz, THD 10 %)
Hz, THD 10 %)
( 3.5mm)
Speaker (LHS-25SCS)
Way
1
Speaker
Passive Subwoofer
1
Way
6Ω
160
Sound Pressure Level
H
x
D)
1
(LHS-25SCW)
Speaker
8Ω
20,000 Hz
-
84 dB/W
Rated
x
35°C, Operation
140 Hz to 20 kHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
to
5% to 85%
Satellite
Suplied Acesori
mm
Temperature: 5°C
MIC Jacks
Speakrs
310
Operating conditions
Operating humidity
Surround mode
Amplifer
2.5
(1m)
65
-
1,500 Hz
82 dB/W
(1m)
30W
70W
60W
140W
92x115x80mm
160x350x280mm
0.5
kg
3.18
kg
?Speakers..........................6?Videocable.........................1
?AMloopantenna.....................1?FMantenna.........................1
?Microphone.........................1?Remotecontrol.......................1
?Batteries(AAA)......................2
and
specifications
are
subject
to
change
without notice.
">