LG LH-TK255Q Owner's manual
PDF
Download
Document
Advertisement
Advertisement
LH-TK255SD_JA8ULLX_ENG_149R DVD KARAOKE RECEIVER OWNER'S MANUAL MODEL: LH-TK255Q (Main Unit: LH-TK255X Speakers: LHS-25SDS, LHS-25SDW) R Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely. Internet address ; http://ua.lge.com Customer Information Center LG ; (380-44) 490-7777, 8-800-303-0000 Precautions Safety About the CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN symbols Indicates hazards itself or for instructions likely to cause damage. harm to the unit other material CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE Indicates special operating Indicates tips and hints for features of this unit. making the task easier. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within an user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within is intended to alert the important operating an accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such book as a case or equipment in confined space a similar unit. CAUTION: This DVD/CD receiver To ensure proper use employs of this a laser system. product, please read this owner's manual carefully and retain it for future reference. Should the require maintenance, contact an authorized service loca(see service procedure). unit tion Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 19921997 Dolby Laboratories. All rights reserved. Performing controls, adjustments, or carrying out procedures specified herein may result in hazardous radi- other than those OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available requested information here and retain this guide as a permanent record of your purchase. to others. You should record Model No. Serial No. ___________________________________ ___________________________________ ation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. as vases, or of your old appliance 1. When this crossed-out wheeled bin symbol is product it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences attached to CAUTION: The (dripping apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. Disposal 2. 3. a for the environment and human health. 4. For detailed information about disposal of appliance, please contact your city office, waste disposal service or the shop where you purchased the product. more your old 2 Table of Contents Before Use Introduction Playable Discs SafetyPrecautions.........................2 TableofContents..........................3 DVD BeforeUse................................3 (8cm/12cmdisc) FrontPanelandRearPanel..................4 RemoteControlOverview....................5 Video CD Preparation Audio CD (VCD) (8cm/12cmdisc) Connections.............................6-7 TVConnections.........................6 .6 ExternalEquipmentConnections SpeakerSystemConnection................7 . . . . . . . . . . . AerialConnections........................7 (8cm/12cmdisc) In addition, this unit can play a DVD-RW, DVD+RW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG BeforeOperation........................8-11 InitialSettings.........................8-11 Operation DVDorVideoCDOperation...............12-14 PlayingaDVDandVideoCD...............12 . OtherFunctions...........................19 KARAOKEOperation....................20-24 KaraokeBasicPlayback...................20 .20-21 KaraokeAdvancedPlayback. KaraokeMENUPlayback...............21-24 . . . . . . . . . . itself, some or . AdditionalInformation.....................19 . the conditions of the CD-R/RW played on recording equip(or DVD-RW, DVD+RW) disc (or DVD-RW, DVD+RW) discs the unit. use irregularly shaped CDs (e.g., heart-shaped octagonal). It may result in malfunctions. Regional code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured playback of region "5" encoded DVD software. The region code on the labels of some 5 DVDs indicates which type of player can play those discs. This unit can only play DVDs labeled "5" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. for Reference Mini Glossary for Audio Stream & (the Do not AudioCDandMP3/WMADisc...............15 . or Do not attach any seal or label to either side labeled side or the recorded side) of a disc. SpecialDVDFeatures....................14 . on the CD-R/RW ment cannot be GeneralFeatures.....................12-14 . DivX files. otes Depending 15 Playing an Audio CD and MP3/WMA Disc JPEGDiscOperation......................16 ViewingaJPEGdisc.....................16 ProgrammedPlayback.....................17 DivXDiscOperation.......................17 OperationwithRadio......................18 or About the disc symbols Surroundmode...........................25 A section whose title has LanguageCodeList.......................26 CountryCodeList.........................26 Troubleshooting..........................27 Specifications applicable only DVD VCD2.0 for instructions of the following symbol is represented by the symbol. one to the disc DVD and finalized DVD±R/RW. Video CDs with the PBC (playback control) function. VCD1.1 Video CDs without the PBC (playback control) function. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 3 Introducin Front Panel and Rear Panel STANDBY/ON STANDBY indicator MIC Connect a microphone Lights red when the receiver is in Standby mode (off). to MIC sockets. DISC PLAY Tray Press and hold down this button about 3 seconds, then press repeatedly to select other function. (b) - TUNING .m OPEN/CLOSE button VOLUME DISPLAY Window buttons MONO/STEREO/ PAUSE/STEP STOP Power cord SPEAKER connectors FM antenna connector MONITOR OUT connector AUX IN MONITOR OUT AUXILIARY INPUT connectors AM Loop antenna connectors Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 4 + (#) M> Remote Control Overview POWER OPEN/CLOSE Select the output (CD/DVD) source Selects or tuner System's (FM To control the TV. and AM bands) enjoy Select an To language (DVD) or audio channel (CD). sing or removes setup menu fast play or slow. (LG Selects forward. Displays the disc's Title VOLUME To SKIP( > ) program a PAUSE/STEP Pause PLAY Starts (X) playback (B) playback. on the MUTE mark on the Mute the speakers. MARKER menu. Marks REPEAT a point during playback. SEARCH all. REPEAT A-B Repeats image. Stops playback. the tuner. Repeat chapter, track, title, Displays sequence. MIC MARKER SEARCH VOL.(V/v) volume. Set the ly at a System to turn specified time. VOL.(V/v) Adjusts echo volume. Press to change brightness of the display window on the front panel during in power-on status. Remote control Operation Range sor sensor off automatical- DIMMER ECHO Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote senAbout 30° in each direction in front of the remote menu. SLEEP Adjusts microphone Angle: the DVD video Enlarges track number menu or a Remote Control adjust speaker volume and TV volume. into MARKER SEARCH menu, if available. (+/-) STOP( x ) CLEAR Removes Radio. ZOOM menu. frequency selection. or TITLE forward*/go to next chapter or track. radio station's menu To tune in the desired radio station. MEMO. a the TUN(-/+) (b/B): PROG. Enter menu. PR/CH(+/-) (v/V): SKIP( . ) Program in the option an Select programme of TV backward*/go to beginning of current chapter or track or go to previous chapter or track. or removes source. (left/right/up/down) Acknowledges playback. Search Accesses display. ENTER Adjust a vocal range. (LG karaoke disc only) Search menu. song of WOMEN's. a Selects the TV's b-KEYCON. -# FORWARD sing b/B/v/V SLOW-/+(t/T) REVERSE setup INPUT only) Reverse/ Forward slow subtitle. song's Accesses On-Screen SCAN(bb/BB) or the DISPLAY karaoke disc Search backward language (DVD). FEMALE TEMPO(-/+) To highlight To . DVD disc. menu on a a Selects the sound mode. MENU Accesses the in SOUND MODE SETUP Accesses subtitle a Removes the song of MAN's. a options RETURN MALE To select numbered Selects audio an service, programme number or SHADOW AUDIO Selects only) SUBTITLE XTS sound effect. enjoy great TV menu. sound. To a directly natural and realistic more (LG 0-9 numerical buttons XTS pro To input source. TV BAND Select the tray. AUX KARAOKE. accesses or removes (Z) and closes the disc Opens DVD/KARAOKE Remove the remote battery installation battery cover on control, and insert AAA) batteries correctly. with the rear of the two R03 and (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 5 Introducin Connections TV Connections Make the of the one capabilities following connections, depending existing equipment. on of your Rear of TV VIDEO INPUT AUDIO INPUT SCART INPUT ip Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the R L L best connections. V Caution Make sure the DVD/CD Receiver is connected to the TV. Select the correct AV directly your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy input on protection system. VIDEO Cable AUX IN T SCART-RCA Video connection Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using MO Rear of DVD/CD receiver the Rear of DVD/CD receiver TV/MONITOR supplied (V). OR O Adaptor (SCART type) Tip: If you want to connect the DVD/CD receiver to a TV with SCART socket, use the SCART-RCA adapter (T). External Equipment Connections Connection Connect the AUX IN (L/R) jacks on the DVD/CD (L/R) jacks on the VCR, receiver to the AUDIO OUT LD player, etc using the audio cables. Rear of VCR (or LD AUDIO OUTPUT L player, etc) VIDEO OUTPUT R Tip: Press AUX these on the remote control to select input to jacks. AV 1 appears on the Display Window. AUX IN MONITOR OUT 6 Connections (Continued) Connection Speaker System Connect the speakers using To obtain the best possible the supplied speaker surround sound, Front speaker (Right) Center cords. adjust the speaker parameters (volume, distance, etc.). Front speaker speaker (Left) Prepa tion AUX IN 66 8 6 6 6 MONITOR OUT Rear speaker (Right surround) Rear speaker (Left surround) Subwoofer otes Be to match the sure speaker cable to the appropriate terminal on the components: + to + and -- to --. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Loop aerial to the AM aerial connector. Connect the AM Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) AUX IN MONITOR OUT otes To prevent Be sure After noise pickup, keep the AM Loop fully extend the FM wire aerial. connecting the FM Wire aerial, keep it aerial away from the DVD/CD Receiver and other components. to as horizontal as possible. 7 Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, By using among other things. For details item, see pages 8 to 11. To on Setup Press SET UP to display the menu. SET UP will take you back to initial To go to the next level: on Off Disc Menu Original Move Select appears. option as well as alternate disc setting for setting(s). Use v / V to select the second desired then press B to move the option to the third level. menu and was on-screen display. DVD audio track original language (disc in which the recorded. Other: To select another language, press number buttons to enter the to the according enter the wrong corresponding 4-digit number language code list on page 26 If you language code, press CLEAR on the remote control. Use v / V to select the desired setting then press ENTER to confirm your selection. require additional steps. DISPLAY Some items or Refers to the Original: then will be shown the current Press SET UP Setup language you prefer for the audio), subtitles, and the disc menu. B to move to the second level. screen for the language Select the Use v / V to select the desired selected item, a Disc Audio / Subtitle / Menu Operation menu Select OSD Press SET UP. The Original Disc Subtitle A second press of the remote control. The setup 2 press English Disc Audio screen. To go back to the previous level: Press b on the remote control. General OSD menu and exit the Menu: display Press B each LANGUAGE PLAY to exit the setup DISPLAY menu. TV Aspect Display 16:9 Mode Widescreen Move TV Aspect DVD 4:3: Select when a 16:9: Select when Display Display Mode Mode Select standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD setting works only when the TV Aspect mode is set to "4:3". Letterbox: Displays a wide picture with portions of the screen. bands on the upper and lower Panscan: the entire 8 Automatically displays the wide picture and cuts off the portions that do not fit. screen on Before Operation (Continued) Distance AUDIO Each DVD disc has variety a of audio output Set the DVD/CD Receiver's AUDIO the type of audio system you options. options according to use. sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the AUDIO 5.1 If you connected speakers to your DVD/CD Receiver, the Distance lets the speakers know how far the setting DRC On Vocal On time. same Press b / B to Select Speaker Setup adjust Prepa tion the Distance of the selected speaker. ote You Rear Move 5.1 and Select Test DVD Speaker Setup adjust the Distance of Center speaker speakers (Left & Right) only. can Select speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. Press b / B to test the Adjust of each signals speaker. signals the volume to match the volume of test memorized in the system. Front Left (L) → Center Rear Right (R) → → Front Rear Left (L) Right (R) → → SubWoofer AUDIO Dynamic Range Control (DRC) Speaker Size DVD Front L Volume 0 dB Distance 2 m Test DivX Small With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, Off Select Move Return thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds Enter and the Speaker at Select a speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right)) a quietest ones). Then, you may listen to a movie losing dialog intelligibility. lower volume without Set DRC to On for this effect. ers otes The DRC function works The level of ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby depending Vocal only during playback of recorded discs. Dolby Digital Dynamic Range Compression on may differ the DVD disc. DVD Size Since the the speaker settings settings. are fixed, you cannot change Set Vocal to On only DVD is The karaoke channels mix into playing. a when a multi-channel Karaoke on the disc will normal stereo sound. Volume Press b / B to speaker. (-5dB adjust the output +5dB) level of the selected ~ 9 Before Operation (Continued) LOCK (Parental Password Control) You LOCK Rating Unlock Password **** Follow step 2 as shown left "New" is highlighted. (Rating). "Change" 3 Enter the then press ENTER. that may not be suitable of these discs contain parental scenes Many applies control information that certain scenes on to the complete the disc. Movies and to disc scenes are or 1 to rated control feature allows you to block access below the rating you input, thereby preventing parental scenes your children from being able to view material you believe is unsuitable. Select "Rating" on the LOCK To Input menu then press the 6-digit number security code is 2 Enter a new code Password and Country input the 4-digit Rating, Code features, you must security code you created. If you have not yet entered a security code you prompted to do so. Selectaratingfrom1to8usingthev/V " (1) one has the most restrictions is the least restrictive. Code can "210499" on clear it using the setup menu cleared. " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country DVD Code country/area whose standards used to rate the DVD-Video disc, based in the reference chapter. were Select "Country press B 2 Follow Code" on the LOCK on the list menu then . step 2 as shown left Select the first character buttons. Rating 1-8: Rating rating eight (8) menu. ote When are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. and or described above. as Enter the code of the the access then press B. to forget your Security and the setup B. 2 menu If you forget your security code you the following steps: from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The 4-digit code, verify. new again the LOCK Press SET UP to exit the If you for children to view. it on Select DVD Some movies contain change password. 2 4 Rating or Select Password Input Move (Security Code) enter 1 UA Code Country can Shift the cursor (Rating). using v / V buttons. using B button and select using v / V buttons. the second character Unlock If you select unlock, parental control is not active and the disc plays in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available same rating on not played or a lower one. found, playback stops. You word or unless an alternate scene the disc. The alternative must have the change the rating If no suitable alternative is must enter the level in order to 4-digit passplay the disc. Press ENTER to confirm your rating selection, then press SET UP to exit the menu. 10 Press ENTER to confirm your country code selection. Before Operation (Continued) OTHERS ? Display the number which you can watch the file. OTHERS ? PBC On DivX(R) Registration Select This rental video has 7 views left. A view ends when you stop video, or playback, play player. Do you want to use one Set The rental has been Playback Control (PBC) to On or Prepa tion expired. This rental is VCD expired. Off. ? On:Video CDs with PBC now No Select Move PBC different of your 7 views Yes ? a turn off your are played according are played to the Display the authorization error. PBC. Off:Video CDs with PBC the same way as Audio CDs. DivX(R) Registration You can Management) Registration Your Please registration use DivX(R) is not authorized to video. (Digital Right code for your unit code is this code to : only. XXXXXXXX register this player with Video On Demand service. This will allow you to rent and using the DivX(R) To learn player play this DivX show the DivX DRM the This video more purchase videos Video On Demand format. go to www.divx.com/vod The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental an encrypt movie file. ote If you rent the DivX VOD file, it has several viewing limits as show below. options of 11 DVD or Playing Video CD a DVD and Video CD Playback Setup Turn on Operation DVD VCD2.0 the TV and select the video General Features VCD1.1 input ote source con- nected to the DVD/CD Receiver. Unless stated otherwise, all operations described the remote control. Some features may also be Audio system: Turn on the audio system and select the input source connected to the available DVD/CD Receiver. Moving When Press OPEN/CLOSE ( Z ) to open the disc tray. Load 2 facingyour up. When a If playback press PLAY. In some cases, the disc menu does not start, might If appear a menu screen or than more one title, you can move to follows: Press DISP., then press the appropriate numbered (0-9) to select a title number. When to another CHAPTER/TRACK VCD2.0 DVD a title DivX on a more disc has than chapter/track as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, the next is displayed may be displayed first after Video CD which contains a menu. menu screen DVD as DVD button disc has instead. The disc has Moving Press OPEN/CLOSE ( Z ) to close the tray. READING appears on the TV screen, and playback automatically. menu. sure the side you want to starts Setup to another TITLE another title chosen disc in the tray, with the label double-sided DVD is inserted, make play is facing down. a the on use loading a press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). DVD Use the bBvVbuttons to select the want to or view, then press ENTER DVD MENU to return to the title/chapter you to start. Press TITLE ote menu screen. For two-digit numbers, press (0-9) in rapid succession. VCD2.0 the numbered buttons Use the number buttons to select the track you want to view. Slow Motion Press RETURN to return to the Menu setting the and the exact operating procedures for may differ depending on the disc. Follow the instructions on the each menu screen. using menu You also may set PBC to Off under setup. If Parental Control is set and the disc is not within the the 4-digit play 12 during pause. will enter SLOW mode. Use the SLOW -/+ to select the 2 1/16, or t 1/2 or T 1/2 required speed: t (backward), or T (forward). To exit slow motion mode, press PLAY. ote Slow motion discs that have code different from your receiver. The player is 5 (five). this player (see page 10). region code. on Your receiver will not VCD1.1 code must be entered and/or the disc must be authorized "Parental Control", DVDs may have a Press SLOW -/+ The t 1/8, t 1/4 1/16, T 1/8, T 1/4 otes Rating settings (not authorized), VCD2.0 DVD menu screen. region region code for a Video CD. playback in reverse is not applicable for DVD Video CD or Operation (Continued) General Features (continued) Repeat Still Picture and To repeat Frame-by-frame playback A-B a VCD2.0 DVD sequence in a title: Press A-B at your chosen VCD2.0 DVD VCD1.1 DivX Press PAUSE/STEP A- appears Press A-B during playback. The DVD/CD Receiver will now sequence You PAUSE/STEP briefly begins. picture frame-by-frame by pressrepeatedly on the remote control. Time Search Search VCD2.0 DVD Press m or M or M DVD To 2 To VCD1.1 DivX on dis- on-screen elapsed playing at time of numbers, press CLEAR to the TV remove num- Within 10 seconds, press ENTER to confirm the start time. Playback enter icon appears The playing the numbers you entered. Then enter the correct bers. repeat the currently playing chapter, press an starts from the selected time invalid on the disc. If you time, playback will continue from the current point. screen. repeat the title currently playing, press REPEAT The VCD1.2 utes, and seconds from left to right in the box. Repeat Chapter/Title/Off Repeat Chapter CLEAR. Within 10 seconds, use the number buttons to enter the required start time. Enter hours, min- REPEAT. The or The "-:--:--" appears in the Time Search box. mode, press PLAY. VCD2.0 - repeat Within 10 seconds, press 3 / 4 to select the Time Search icon in the on-screen display. If you enter the wrong DVD point. the current disc. (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD and DivX the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). DVD-Video discs VCD2.0 The Time Search box shows the mX8, mX16, mX100 Repeat the TV screen, and the Press DISP. during playback. play appears on the screen. to select the repeatedly 2 required speed: mX2, mX4, To exit SEARCH at your chosen end on The Time Search function allows you to start any chosen time on the disc. go into SEARCH mode. now starting point. screen. DivX during playback. The DVD/CD Receiver will Press m VCD1.1 the TV To cancel the sequence, press A-B advance the can on again A-B appears go into PAUSE mode. 2 ing briefly VCD1.1 a Repeat To exit second time. ote Title icon appears on the TV screen. REPEAT Repeat mode, press a third On a Video CD with PBC, you must set PBC to Off menu to use the Repeat function. on the setup time. The Repeat Video CDs To - Off icon appears Repeat the TV on screen. Track/All/Off repeat the track currently playing, press REPEAT. The 2 To Repeat on the TV screen. repeat the disc currently playing, press REPEAT The Track icon appears a second time. Repeat All To exit icon appears on the TV screen. REPEAT Repeat mode, press a third time. The Repeat Off icon appears on the TV screen. ote On a Video CD with PBC, you must set PBC to Off on menu to use the Repeat function. See page the setup 11. 13 Operation DVD Video CD or Operation (Continued) General Features (continued) Marker Search You nine points To enter 1 playback start can a VCD1.1 DVD from VCD2.0 memorized a point. Up DVDs may contain menus that allow you to access features. To use the disc menu, press MENU. Then, press the appropriate number button to select an mark, follow these steps. special During disc playback, press MARKER when playback reaches the spot that you want to option. Or, 2 Repeat step on a the TV on screen briefly. 1 to enter up to nine Marker the 1/2/3/4 buttons to use points Title Menu DVD If the current title has 1 During 2 Marked Scene a disc playback, press The MARKER SEARCH menu the SEARCH. will appear on the a menu menu will appear on may appear. angles, spoken lanoptions, and chapters for the Marker Disc Menu DVD Press MENU. will start from the Marked remove menu, the screen. guage and subtitle title. screen. Press ENTER. To a Otherwise, the disc The menu can list camera Within 10 seconds, press 1/2 to select number that you want to recall. 3 Playback 4 your Press TITLE. disc. To Recall highlight selection, then press ENTER. memorize. The Marker icon will appear DVD Checking the contents of DVD Video discs: Menus to be memorized. can DVD Features Special scene. The disc menu is displayed. the MARKER SEARCH menu, press SEARCH. the Audio Changing Marked Scene To clear a 1 During 2 disc playback, press The MARKER SEARCH menu Language DVD DivX Press AUDIO repeatedly during playback to hear different audio language or audio track. SEARCH. will appear on the a screen. Changing the Audio Channel want to erase. Press AUDIO Press CLEAR. different audio channel repeatedly during playback to hear a (STER., LEFT or RIGHT). Press 1/2 to select the Marker number that you 3 4 Repeat steps 5 VCD2.0 VCD1.1 The Marker number will be erased from the list. ote 2 and 3 to erase additional Marker If appears, the feature is not available on the disc. numbers. To remove the MARKER SEARCH menu, press SEARCH. Zoom DVD VCD2.0 Press ZOOM during playback If you press ZOOM 100% size → 1600% size 2 or still playback Use the 1 2 zoomed repeatedly, the magnification level steps. 400% size → → 800% → 100% size 3 4 buttons to move through picture. ote The 14 zoom Press S-TITLE repeatedly during playback languages. DivX otes The subtitle file of the DivX file is to see the function may not work for some DVDs. the displayed only smi, srt and sub. to If there is no information not read in the DivX activate the Zoom function. increases up to four DVD different subtitle VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Subtitles or there is file, "1/1" etc a are code that displayed. can Audio CD MP3/WMA Disc or Playing an Audio CD and Disc CD MP3 Operation MP3/WMA Repeat Track/All/Off You WMA play recordings on play can CD-ROM, CD-R, MP3/WMA formatted or CD-RW discs. 2 Press REPEAT to select ? Once you insert an audio CD a menu appears on the screen. Press v / V to select a track then press ? ? TV ENTER and playback 0:00:00 playing a MP3 on a WMA disc. disc. The repeat icon appears. Audio CD or CD title/chapter/all/track a 1 Press REPEAT when The DVD/CD Receiver PLAY can desired repeat mode. a TRACK: repeats the current track ALL: repeats all the tracks on a disc. does not Off(No display): Operation play repeatedly. starts. 1/12 Search CD 1 Press m or MP3 WMA Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 Mduring playback. The receiver will 2 Press m or now M go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). 3 To exit SEARCH required or MX2, mode, press PLAY. MP3 / WMA 1. Press v / V to select see 2. a folder, and press ENTER to the folder contents. Press v / V to select ENTER. Playback a MP3 / WMA disc track then press PLAY or starts. limited ? as 1/104 ? MP3 List Program 1-Music1 ? 2-Music2 3-Music3 5-Music5 7-Music7 kHz The DVD/CD Receiver cannot read an - in file list a on to return to the Folder a the MP3/WMA list, use menu the v / V to move or use menu is high- b / B to select MP3/WMA or JPEG on top of the then press ENTER. Pause CD WMA or playback, again. or > press PLAY or ? In CD MP3 briefly during playback to go beginning of the current briefly to MP3 / WMA files. We rec- names should have incorporate They should not a cre- maximum of 8 letters and .mp3 or .wma extension. contain special letters such as / ? an *:"<>letc. ? The total number of files on the disc should be less than 999. requires discs and recordings step back to the optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and WMA to the next track. previous track. of audio CD and MP3/WMA, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. case File must are press to return to the Press . twice playback achieve during playback. to another Track Press . track to to meet certain technical standards in order to PAUSE/STEP Moving / format should be ISO 9660 This DVD/CD Receiver MP3 1 Press PAUSE/STEP 2 To return to MP3/WMA ".mp3" ommend that you use Easy-CD Creator, which ates an ISO 9660 file system. to the next page. JPEG word physical impossible and want highlight CD with MP3/WMA file and JPEG file, you can menu. Press TITLE and lighted. Then, file extension other than If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is switch MP3/WMA and JPEG MP3/WMA a CD-R ? On - ? and press ENTER. Press MENU to (MP3), ? otes are is ".wma". 6-Music6 If you player - file that has 4-Music4 with this Sampling frequency: within 32 48 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) within 24 0:00:00 compatibility follows: these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. 15 JPEG Disc Viewing This unit a Operation JPEG disc JPEG JPEG disc play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. as can disc and close the tray. The JPEG menu appears on the TV Insert notes on ? with this is limited player upon the size and number of JPEG a long time for the DVD/CD Depending files, it could take Receiver to read the disc's contents. If you don't display after several minutes, a see an on-screen screen. of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List compatibility follows: Preview --- and burn another disc. pixels JPEG Folder 1 ? JPEG Folder 2 JPEG Folder 3 The total number of files and folders on the disc should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 ? JPEG Folder 8 2 Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, remote to use the v / V buttons on ? the ? Windows viewing a file, you can press STOP previous menu (JPEG menu). to move four Slide : Speed options (Normal), >>> (Fast) and II (off). Use vVbBto highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. are (Slow), >> SLIDE SHOW Use vVbBto to JPEG highlight the (Slide Show) then press ENTER. JPEG STILL PICTURE 1. Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. names While ips ? File them to be read There > If the files have rename and press ENTER. highlight To return to the slide show, press PLAY PAUSE/STEP again. Press SKIP (. or >) or once TO ROTATE PICTURE Press b / B during showing ture clockwise 16 or while previous a press JPEG MOVING TO ANOTHER FILE to advance to the next or viewing a picture file. JPEG picture counter clockwise. to rotate the pic- a different Ensure that all the selected files have the extensions when If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. to the ? ? Some discs may be incompatible due to recording format or the condition of disc. the files copying are ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without by into the CD ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though DivX Disc Programmed Playback The program function enables you to store your favorite tracks from any disc in the receiver memory. A program Using Insert a this DVD/CD Receiver you Insert can play DivX disc. disc and close the tray. The DivX appears on the TV screen. contain 300 tracks. can Operation a menu disc. 1/12 0:00:00 Audio CD and MP3/WMA Discs: Audio CD MP3/WMA or menu DIVX as appears List below. Movie Folder 1 Operation Movie Folder 2 Movie Folder 3 0:00:00 1/12 0:00:00 Audio CD List Movie Folder 4 JPEG Movie Folder 5 List Program Movie Folder 6 Program Track1 Track8 Music Folder 1 Movie Folder 7 Track2 Track3 Music Folder 2 Movie Folder 8 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 Music Folder 7 Music Folder 8 Audio CD Menu Select 2 1/104 MP3 a track on Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 2 MP3/WMA Menu v/V buttons the "List", then press PROGRAM select (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. or on the remote to and highlight press ENTER. " If you want to view a particular file, press v/V to a file and press ENTER or PLAY. highlight Press STOP to exit. ote You can add all tracks in the disc. Select " ( Add All)" icon then press ENTER. otes Be ? Select the track you want to start playing on the "Program" list. Press MENU to move to the next page. Press PLAY or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" list have To normal resume back, select a played on ? in the track of AUDIO list and then press PLAY. Press REPEAT when II Sound mode is not available for DivX file. logic (Subtitle file, available. Subtitle in Chinese will not be in English displayed during play available) is a DivX The DivX files in your memory card will not be able to be DivX disc compatibility with this player is limited play. as follows: ? Available resolution size of the DivX file is under 720x576 playing a ? The file (W disc. The repeat H) pixel. x of the DivX subtitle is available by 20~40 (different by language). If there is impossible code to express in the DivX file, it mark on the display. may be displayed as name characters icon appears. ? 2. only The Pro REPEAT PROGRAMMED TRACKS 1. subtile is ? ? programmed playCD (or MP3/WMA) a by pressing ? file. from playback ENTER every time. When the subtile has more than two languages in the original once. playback to select "SUBTITLE ON" mode before sure DivX file Press REPEAT to select a desired repeat mode. " " _ ? ? ? TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): does not play repeatedly. ? If the number of the interleaved, 1. Use vVto select the track that you wish to Program list. erase Press CLEAR. Alternatively, select " (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. of LIST " (Del all)", then press ENTER. 30 per 1 or 1-point audio is GMC, outputted. supports the unit of the record level. GMC? encoders, like DivX There are 2-point, or or Xvid, have this option. different levels of GMC 3-point encoding, usually called 1-point, GMC. DivX file Playable z ".avi ", ".mpg ", ".mpeg " Codec format z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 Playable Use v / V to select over GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 Playable ERASING THE COMPLETE PROGRAM either video If the file is recorded with * from the 2. ? some LIST frame is this unit may not operate normally. If the video and audio structure of recorded file is not second, ? ERASING A TRACK FROM "PROGRAM" screen ", "3IVX ", "MP42 ". Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz (MP3), within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - - ote The programs ? are also cleared when the disc is removed. - - 17 Operation Presetting You can the radio stations sure that you have turned down the vol- Preset radio stations in the DVD/CD Receiver's memory (see "Presetting radio stations" on the left). first ume. Press BAND until AM Press BAND AM 2 on the remote control until FM in the (MW) appears display display or window. BAND, FM and Press and hold TUNING or 2 panel for about two seconds frequency indication starts to change, Scanning stops appear in the until the front preset on program) PR(D/E) the preset number display window. you want. on select another function mode the remote control again. a station with Press TUNING a weak in step 3 manually. appeared in the display window again, the stations are and then press PROG./MEMO. cleared. itself and change to mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change the preset number, above. 18 in step 2. tuning, repeatedly. or For a follow the steps 5-6 as radio station the number buttons TUN+ B on the on directly the remote control preset radio station directly. to listen to preset station 4, press 4 on the control. To listen to preset station 19, press 1 a example, (within 3 seconds). For your reference If an FM program is Press MONO/ST. disappears If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" by to select remote Press and hold PROG./MEMO. for about two seconds will go off tuning press TUN- b preset a can use then 9 To clear all the stored stations display radio stations trol. You signal repeatedly or and "CLEAR ALL" is automatic For automatic tuning, press and hold TUN- b or TUN+ B for about two seconds on the remote con- 3 to 6 to store other stations. to tune in the station or or (DVD/CD, AUX, etc.,). remote control To select To tune in non-preset Use manual For manual The station is stored. Repeat steps To turn off the radio To listen to the remote control to select Press PROG./MEMO. - Press POWER to turn the DVD/CD Receiver off the remote control. number will flash in the on stereo a window. Press PROG./MEMO. Press (for PR(D/E) repeatedly on the remote control preset station you want. Adjust the volume by rotating VOLUME on the panel or by pressing VOLUME + or on the remote control repeatedly. then when the DVD/CD Receiver tunes in display Press to select the tunes in release. station. "TUNED" and "STEREO" FM appears in the or Each time you press the button, the DVD/CD Receiver one preset station at a time. on the front (MW) window. The last received station is tuned in. And then every time you press AM (MW) changes alternately. A to the radio Listening preset 50 stations for FM and AM (MW). Before make tuning, with Radio stereo effect, but the button To in the again noisy panel so that "ST." display window. There will be no the reception will improve. Press on the front to restore the stereo effect. improve reception Reorient the supplied antennas. Other Functions Additional Information Last Condition Memory DVD This DVD/CD Receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load tings memorized, the latest stop ly recalled. player. a disc that has its set- position Sleep Timer You set the DVD/CD Receiver to turn off automati- cally 1 are play 2 stored in memory for use any time. settings of disc if you switch off the DVD/CD Receiver before commencing to play it. a Screen Saver The in Stop appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote more than 5 seconds to be able to select system (PAL, NTSC a AUTO). or When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected NTSC: with Multi system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. DVD/CD Receiver Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. XTS (Excellent True You as of operating your limited functions of LG TV. Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... Tips: When Before using playing the movie with the weak bass relatively to the general music, it XTS- 2: high display source front the remote control, press the TV to XTS- 3: operated. To switch the remote control mode sense of sound at woofer for you to satisfy with. In the mode of 2 CH BYPASS, It creates the Follow the instructions below to operate for your LG TV. select the device to be Sound) enjoy the vivid stereophonic sound of the digital original source without any signal distortion. can enforces the capable well repeatedly. Mute the TV as time. ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. XTS- 1: Your remote control is sleep time appears in the dis- window. sound Controlling sleep Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF Press the DIMMER You must select the control for time. This function will change the brightness of the display window on the front panel during in power-on status. Select System specified Dimmer appears when you leave the DVD mode for about five minutes. screen saver player a The SLEEP indicator and otes Settings at Setting Press SLEEP to set the desired is automatical- This DVD/CD Receiver does not memorize can You effect via the rear by playing the sound speakers same as the speakers. can operate both XTS- 1 and XTS- 2 different simultaneously and it can complement the relative degrading of the sound pitch of the The woofer at the XTS- 2 mode. (to operate a device), be sure to press the TV first. POWER, CH(E/D), VOLUME (+/-), and INPUT buttons on remote control are used to operate the LG TV. Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) (E/D) button repeatedly until the TV on or off. Setting temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when changing changing it to 2.1 CH. XTS pro ote If the remote control does not operate your particular TV, try the other code or use the remote control originally supplied Due to the variety ote The XTS- 2 mode is with the LG TV. of codes used (LG and Gold Star) by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every model of LG TV. The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON → setting changes in XTS-P OFF 19 Operation KARAOKE You can You can Operation play KARAOKE (singing along) with karaoke disc by connecting a microphone to the unit. enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer's Karaoke Basic Karaoke Advanced Playback Check if the system is connected. (Refer to the page 6.) 2 Turn on the powers of TV To (or Amplifier) Karaoke and enter to the video mode Press OPEN/CLOSE and load the label and DVD TV. on supplied facing up. Adjust MIC Volume VOL.(D/E) on the remote control to microphone volume or decrease it. MAX steps) increase the To ~ Adjust ECHO Volume You Press OPEN/CLOSE ( Z ) to close the can give an microphones. tray. [TV Screen] Playback Press MIC (MIN to open the disc tray karaoke disc in the tray with (Z) voice. echo effect to the sound from the Press ECHO VOL. ( D/ E ) on increase the echo volume MAX the remote control to or decrease it. (MIN ~ steps) Key Control C˚・O? change the key to suit your vocal range. adjust the key to 13 steps (6 steps higher, steps lower and the original key). The setting appears on the screen. 0000 You can You can Press b- KEY CON. - 6 # buttons remote control to find the repeatedly on the key that suits your vocal range. Connect the microphone to the MIC To flatten the jack. CONTROL To Select the melody number you want by pressing NUMERIC buttons. If you cancel the selected the CLEAR. melody number, melody number is played. microphone. melody ends, it is stopped automatically in tone with score and appears. ote When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the 20 microphone system. CONTROL key. . After the CONTROL key one by one, press the KEY (#) repeatedly during playback. To return to the press Press PLAY The selected Sing sharp key one by one, press the KEY (b) repeatedly during playback. original key, press the KEY (b/#) repeatedly to appear the original KARAOKE Reserving Operation the Karaoke MENU Songs Playback When you want to make a reservation of next melody, you can enjoy the most 8 melodies reservation Preparation Without The main MENU appears waiting. Press the NUMERIC buttons to melody number you want play mode. Melody number appears on 2 Press MENU on the karaoke mode. Main MENU reserve on the screen. the TV (On screen) Operation in the karaoke disc the TV screen. Press PROG./MEMO. The melody number is made Repeat steps You a reservation. 1-2. can reserve 8 songs. ip After the will be one song finishes its playback, the next song playback automatically. SETUP ( To cancel the reserved song Select Each time you press CLEAR, the reserved song will be cancelled one by one. main To cancel or change the wrong reserved song Press the PROG. to move to the desired position, 2 ) by pressing v/V on the menu. Use b/B to select the desired option then press ENTER. then press the CLEAR to cancel the reserved song. Male/Female Function If you want to sing a song of MAN's or WOMEN's key, press MALE/FEMALE button repeatedly to change MAN's or WOMEN's can use this function when you want to SCORE ON/OFF play fast or slow. CII : When Press TEMPO + repeatedly during singing to play faster. ? Press TEMPO - repeatedly during singing slower. Shadow Function If the caption and the song's subtitle are mixed song's subtitle may be invisible. In this case, to highlight the song's subtitle, press SHADOW. It will be highlighted by background shadow image. - C˚II CII C˚II CII ( selection of out after piece one To cancel it, select the C˚II FANFARE ON/OFF CII : . CII C˚II When CII singing by appears on selection of the TV CHORUS ON/OFF : ) When . ( CII singing by a song ) lyric . ( chorus is heard melody, C˚II screen. To cancel it, select the C˚II CII C˚II finished. LYRIC ON/OFF : ) song score of song is ended. ( To cancel it, select the CII C˚II melody, In condition of POWER ON, scoring fanfare operates. The fanfare sound comes out after singing screen up, the C˚II CII singing by comes ? C˚II CII key. Tempo Change You CII selection of melody, C˚II song sound. To cancel it, select the C˚II . ote To move to the main menu, press MENU. 21 ) KARAOKE Operation MUSIC LIST ( SINGER LIST ) ( ) and select the initial 1 Select LOCAL SONG SONG ( ) ( on of the singer you want by pressing the v/V in the SONG LIST and SINGER LIST menu, and press ENTER. Select v/V and POP ) by pressing the the main menu. The LOCAL SONG, POP SONG and CLASSIC menu will be shown on the TV screen. 1 5 7 A F H M R 2 Select the singer you want and press ENTER. Select or 2 by pressing the v/V, 140iNA. . by pressing the v/V, . and press ENTER. SONG LIST and SINGER LIST menu will be shown on the TV screen. 3 Select the song title of the pressing singer you want the v / V and press ENTER. 0871 AEa TEAu 140iNA. . BA 140iNA. . NaCTOeANOM Oa, Oa 140iNA. . 140iNA. . 140iNA. . 140iNA. . 2431 BAi 1078 aA SONG LIST ( ) 1816 and select the initial of the 1 Select song title you want press ENTER. by pressing the v/V , 2714u AiNi 2717u CKioA˛eOT. AEUAT. . . . . . then otes 1 2 To move the previous mode, select the vV, then press ENTER. 3 4 5 Press b/B to 7 B E 2 Select the song title you want v/V, and press ENTER. 22 by , by pressing the 0165 10 000 KM CiKAo 1368 10 KAeEau iAcno... 1369 1100 Aeau 0001 12-85-00 XAMEa... 1370 17 aEi oAai ... move to the page. by pressing the KARAOKE CLASSIC Operation ( COMPOSER LIST ) ( ) and select the initial 1 Select Select by pressing the vV and press ENTER in the LOCAL SONG, POP SONG and CLASSIC menu. The CLASSIC LIST and COMPOSER LIST be shown on the TV menu , will of the composer you want by pressing the v/V in the CLASSIC LIST and COMPOSER LIST menu, and press ENTER. screen. Operation A B C D E F G H 2 Select the composer you want v/V, and press ENTER. CLASSIC LIST ( by pressing the ) and select the initial of 1 Select the song title you want press ENTER. by pressing the v/V, then BALAKIREV BEETHOVEN BOCCHERINI BRAHMS A B C D E 3 Select the song title of the composer you want F G pressing H 2 Select the song title you want V, and press ENTER. by pressing the v/ , 3816 BAGATEL OP.33 NO.1 BEETHOVEN 3817 BAGATEL OP.33 NO.4 BEETHOVEN 3852 FUER ELISE BEETHOVEN 3904 MOONLIGHT SONATA... BEETHOVEN 3905 MOONLIGHT SONATA... BEETHOVEN 3906 MOONLIGHT SONATA... BEETHOVEN 3802 ABOUT FOREIGN LAN... SCHUMANN 3923 PATHETIQUE SONAT... BEETHOVEN 3803 AIR (HOLBERG) 3924 PATHETIQUE SONAT... BEETHOVEN GRIEG by the v / V and press ENTER. 3804 ALMOST TOO SERIOU... SCHUMANN 3805 ANDANTE & RONDO C... MENDELSSOH 3806 ANITRA'S DANCE (P... GRIEG 3807 ARABESKE OP.18 SCHUMANN 3808 ARABESQUE NO.1 IN E DEBUSSY 3809 ARABESQUE NO.2 IN E DEBUSSY ote To move the previous mode, select the vV, then press ENTER. by pressing the 23 KARAOKE Operation RANDOM ( Select the main Select number you want and press ENTER. ) by pressing v/V Sing along on menu. 7 When reaching Press ENTER to a enjoy a song game dividing by two teams of red team & blue team. Select by pressing as v/V on the below. 123456789 60708090 2 Select by pressing v/V, and select pressing one of NUMERIC buttons 1~9by b/B to select winner's number. Select and select one of 60,70,80 or by pressing v/V, by pressing 90 b/B to select success score. Select by pressing vVbB, then press ENTER. It appears as below. 0 24 blue team targeted winning number, on the TV the screen. below. as 0 Whether you select menu. It appears the or ) function which main of red team begin randomly. CHALLENGE ( It has v/V/b/B accompaniment. will be shown It appears 2 with the Repeat step 4-5. Change the team alternately. by pressing keep going or the song game by pressing v/V or as not, below. Mini Glossary for Audio Stream & Surround mode Sound Mode Allows you to enjoy 5.1(or 6) discrete channels of quality digital audio from DTS program sources high such as discs, DVD and compact discs, etc.bearing the trade- Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. You VCD2.0 DVD VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. mark. DTS When DVD is inserted You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) 3 ENG Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from a Dolby Digital program mark, you source. enjoy can accuracy, and spatial " (For example D 2CH or AUDIO button, press SOUND ) by pressing button repeatedly. The 2 ENG D 2CH " If you play DVDs with better sound quality, greater Bypass Music Movie Matrix even improved dynamic range. After you select 5.1 channel b) 1 ENG (For example D 5.1 CH or 4 ENG ) by pressing AUDIO button, DTS 5.1 CH (II) an Pro -" II creates five full-bandwidth output channels from two-channel sources. This is done using Dolby Logic - " indicator will be displayed on press SOUND button. the TV "BYPASS" indicator will be only displayed screen. on the display window. advanced, high-purity matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use When Video CD is inserted Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the order. following with stereo television BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality use with any stereo music recordings. MATRIX mode: The Matrix mode is the → → → → → → of discrete 5.1-channel sound. MUSIC mode: The Music mode is for → → same as the Music mode ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. except that the directional enhancement logic is When CD is inserted turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the also find in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The use ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be following order. BYPASS STUDIO CLUB HALL THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → For your reference ? BYPASS identify the encoding format of program by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can software Software with multichannel surround audio played according You to the way it was signals recorded. is - - - otes When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). When you use a microphone except Karaoke function, you can't enjoy 5.1 channel output. Only 2 channel sound will out by the influence of the microphone system. 25 Refrnce Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu. following initial settings: Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 Telugu 8469 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 7869 6678 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 Country Choose a 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK SI Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM Ukraine UA JP Paraguay Philippines PY CZ PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg 26 Republic TR Troubleshooting Check the following guide for the possible cause of a before problem contacting Cause Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? securely Insert that the DVD or, a disc. (Check into the is display lit.) picture. ? The TV is not set to receive DVD signal ? ? sound or only a very low-level sound is heard. The video cable is not connected ? video input Connect the video cable into the mode jacks securely. ? The connected TV power is turned off. ? Turn ? The ? Select the correct connected with the equipment audio cable is not set to receive DVD The audio cables are not connected on the TV. audio receiver input mode of the you can hear the sound from the DVD/CD Receiver. signal output. ? ? securely. The DVD/CD Receiver does not start playback. appropriate on securely. no Select the the TV so the picture from the DVD/ CD Receiver appears on the TV screen. output. There is the power cord wall outlet. Plug audio CD indicator in the DVD does not work. No service. so Connect the audio cable into the jacks securely. ? The power of the equipment connected with the audio cable is turned off. ? ? The audio ? Replace ? No disc is inserted. ? Insert connecting cable is damaged. Turn on the equipment connected with the audio cable. a it with disc. a new one. (Check that the DVD, audio CD indicator in the DVD or is display lit.) ? An unplayable disc is inserted. ? Insert a playable disc. the disc (Check type, colour system and Regional code.) ? A menu is on the TV ? screen. Press the SET UP button to turn off the menu screen. Loud hum or noise is ? The Rating level is set. ? The plugs ? The speakers and components poorly. and jacks are dirty. ? Cancel the Rating function the rating level. ? Wipe ? Connect the heard. are connected ? ? change them with a cloth slightly moistened with alcohol. speakers and components securely. The DVD/CD Receiver is located too ? close to the TV. Radio stations cannot be tuned in. or Move your TV away from the audio components. The signal strength of the stations is (when tuning in with automatic tuning). too ? Tune in the station manually. Preset the stations (page 18). weak ? No stations have been preset or preset ? stations have been cleared (when tuning by scanning preset stations). The remote control does not work ? properly. ? The remote control is not pointed at the remote sensor of the DVD/CD Receiver. ? The remote control is too far from the ? DVD/CD Receiver. ? There is an obstacle in the Point the remote control at the remote of the DVD/CD Receiver. sensor Use the remote control within about 23 ft path of the ? (7 m). Remove the obstacle. remote control and the DVD/CD Receiver. 27 Refrnce Specifications Power Power Refer to main label supply consumption Refer to main label Mass Genral External dimensions CD/ VD FM Tuner AM [MW] (W x H x D) kg 360 x 56 x Temperature: Semiconductor laser, PAL 625/50, NTSC 525/60 0.5 % Video output 1.0 V Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 30W+30W(6Ωat1kHz,THD10%) Front: 30W + 30W (THD 10 %) nm (1 kHz, NOP-3dB, 20 kHz LPF/A-Filter) (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack 108.0 MHz - or 65.0 - 74.0 MHz, 87.5 108.0 MHz - 10.7 MHz 60 dB 140 522 - - (Mono) 10,000 Hz 1,620 kHz or 520 - 1,720 kHz 450 kHz Centre*: 30W Outputs MONITOR Surround*: 30W 1 30W + Subwoofer*: 70W (8Ω (6Ω at 30 kHz, THD 10 %) Hz, THD 10 %) at 1 ( 3.5mm) Speaker (LHS-25SDS) Way 1 Speaker Passive Subwoofer 1 Way 6Ω 160 - (1m) 30W H x D) 1 (LHS-25SDW) Speaker 8Ω 20,000 Hz 84 dB/W Rated x 650 More than 80 dB (* Depending on the sound mode settings and the source, there may be no sound output.) Input Power Max. Input Power Net Dimensions (W Net Weight wavelength 140 Hz to 20 kHz More than 75 dB Sound Pressure Level 65 - 1,500 Hz 82 dB/W (1m) 70W 60W 140W 94x102x88mm 160x350x273mm 0.52 kg 3.01 kg ?Speakers..........................6?Videocable.........................1 ?AMloopantenna.....................1?FMantenna.........................1 ?Microphone.........................1?Remotecontrol.......................1 ?Batteries(AAA)......................2 (the date of the production of goods). First figure ( of the left ) of series number Month of the production of this goods. means Year, next 2 figures - Designs : status: Horizontal Laser Type Impedance Frequency Response Suplied Acesori P/NO Operation Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Satellite Notice mm 5°C to 35°C, 5% to 85% MIC Jacks Speakrs 310 Operating conditions Operating humidity Surround mode Amplifer 2.5 and specifications 3834RH0149R are subject to change without notice. ">

Public link updated
The public link to your chat has been updated.
Advertisement