LG 14CA8RB, 21CA8RB, 21CA8RGE Owner's manual

LG 14CA8RB, 21CA8RB, 21CA8RGE Owner's manual
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
the back cover and quote this information to your dealer when you require service.
Model number
:
Serial number
:
on
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation / Front panel
4
Basic
7
operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On
On
screen
language
selection
(option)
8
screen menus
Menu selection
Setting up
TV stations
9
Auto programme tuning
Manual programme tuning
Programme
edit
Favourite programme
Calling the programme table
Picture adjustment
PSM (Picture Status Memory)
CSM (Colour Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
15
Sound adjustment (option)
SSM (Sound Status Memory) / Sound
17
adjustment
X-WAVE
(Wireless Sound) (option)
Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
Time
setting
Setting the
Setting the
20
clock
On/Off timer
Auto off
Other functions
TV and AV modes / Auto AV switching
Child lock / Blue back (option)
Games (option) / Sleep timer
21
(option)
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
24
27
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
cause
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be
panel of the set.
adjusted
with the buttons
on
the front
Remote control handset
Before you use the remote control
teries. See the next page.
1.
POWER
MUTE
POWER
switches the set
handset, please install the bat-
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
1
123
2.
select
a
number.
456
2
3.
789
MENU (or INDEX)
selects a menu.
selects
MENU/INDEX
0
TV/AV
4.
4
EYE/
5
on or
off.
LIST
SSM/
()
(Programme Up/Down)
automatically.
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6
SLEEP
programmes
OK
7
FAVOURITE
accepts your selection
/
8
PICTURE
TURBO/
or
displays
the current mode.
SOUND
6.
9
4
(option)
() /
scans
()
Q.VIEW
PSM
TELETEXT
selects a programme or a menu item.
switches the set on from standby.
VOL
OK
PR
(only
()
5.
VOL
EYE/*
switches the eye function
I/II/
PR
index page in the teletext mode
models). (option)
3
TV
an
Q.VIEW
returns to the
previously
viewed programme.
7.
PSM (Picture Status
recalls your preferred
8.
FAVOURITE
selects a favorite programme.
9.
TURBO PICTURE / SOUND BUTTON
selects Turbo picture and sound.
Memory)
picture setting.
(option)
Location and function of controls
10. MUTE
switches the sound
on or
off.
11. TV/AV
selects TV
or
AV mode.
switches the set
from
on
standby.
12. I/II/*
(option)
selects the language during
selects the sound
dual
language
broadcast.
(option)
output.
13. LIST
POWER
displays
MUTE
the programme table.
10
1
2
3
4
5
6
7
8
9
MENU/INDEX
0
TV/AV
14. SLEEP
sets the
15. SSM/*
recalls
sleep
timer.
(Sound Status Memory) (option)
your preferred sound setting.
16. SURROUND
(º/*) (option)
11
TV
selects surround sound.
12
*
:
EYE/
No function
COLOURED BUTTONS
TELETEXT
models)
or
:
These buttons
are
used for teletext
(only
VOL
I/II/
PR
programme edit.
installation
+
LIST
13
powered by
two AAA
type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
polarity symbols (
()
Q.VIEW
The remote control handset is
the
VOL
OK
PR
Battery
()
and
-
)
marked inside the
compartment.
PSM
SSM/
SLEEP
FAVOURITE
/
PICTURE
14
15
16
SOUND
TURBO/
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
Shown is a simplified representation of front or side panel.
Here shown may be somewhat different from your set.
VIDEO
VIDEO
6
(L/MONO)
1234
(R)
7
VIDEO
(L/MONO)-AUDIO-(R) !
P-TURBO-S
7
5
6
789
!
r
ON/OFF
!
MENU OK F VOL G E PR D
I
AUDIO
I
AUDIO
!
r
ON/OFF
MENU OK F VOL G E PR D
VIDEO
!
(L/MONO)-AUDIO-(R) !
S-TURBO-P
VIDEO
VIDEO
6
1234
(L/MONO)
I
AUDIO
I
AUDIO
(R)
ON/OFF
(Side panel)
r
5
MENU
OK F VOL G E PR D
1234
789
6
VIDEO AUDIO
5
!
TURBO
SOUND PICTURE
67
8
9
PRD
ON/OFF
r
F VOL
MENU
VOLG
OK
PRE
1
234
5
9
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
3.
5.
mode.
REMOTE CONTROL SENSOR
Note
4.
standby
:
supplied remote control handset. (When
others, they'll be not able to function.)
Only
you use
MENU
selects a
use
the
menu.
OK
accepts your selection
displays
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
or
the current mode.
selects a programme or a menu item.
switches the set on from standby.
6.
AUDIO (or AUDIO-L/R)/VIDEO IN SOCKETS (AV or AV2) (option)
Connect the audio/video out sockets of external equipment to
these sockets.
7.
HEADPHONE SOCKET
Connect the headphone
8.
9.
(option)
plug to this socket.
TURBO SOUND/PICTURE (option)
switches Turbo sound or Turbo picture on or off.
EYE (option)
adjusts picture according to the surrounding conditions.
Note : Shown is a simplified representation of front or side
Here shown may be somewhat different from your set.
6
panel.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
fully.
3.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
4.
Press the main power button
to switch the set off.
again
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
buttons.
MENU
Volume
adjustment
Press the F / G button to
adjust
the volume.
PR
VOL
I/II/
()
VOL
OK
Quick view
PR
Press the Q.VIEW button to view the
were
previous programme
you
()
Q.VIEW
watching.
SSM/
Mute function
SOUND
Press the MUTE button. The sound is switched off and the
display
TURBO/
>
appears.
You can cancel it by pressing the
TURBO SOUND button.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
MUTE,
on
the
F
/
G, SSM/*, I/II/*,
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
4.
will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
on screen
displays
viewing.
7
On
screen menus
The
an
between you and your set takes place on screen with
menu. The buttons required for the operating steps are
dialogue
operator
also
displayed.
Menu selection
1.
2.
3.
4.
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
F/GorD/E.
You
to the
can move
higher
level
to move to the lower level menu
with OK or F button and
press the G button.
menu
Note :
In mono models, the Sound menu does not appear.
a.
b. In some models, Turbo Pic. will not display in the Picture menu.
In some models, Turbo.Snd. AVL, Balance, Woofer, X-WAVE
c.
or Treble, Bass will not display in the Sound menu.
d. In some models, Language, Blue back, Game, Booster
will not display in the Special menu.
,
MENU
{
BG
{
System
Storage
{
I
Prog.Oedit
{
Normal
{
DK
Favourite
{
Turbo
{
M
AutoOprog.
{
Manual
(
PR
VOL
()
PR
)O}i{OOKOMENU
Station
VOL
OK
(
)O}i{OOKOMENU
()
PSM
{
TurboOPic.
{
CSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
menu
(
{
Channel
{
Fine
{
Search
{
Name
{
{
2
(
)O}i{OOKOMENU
)O}i{O OKOMENU
Picture
SSM
{
TurboOSnd.
{
AVL
{
Balance
{
Woofer
{
Treble
{
Bass
{
X-WAVE
{
menu
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
(
)O}i{OOKOMENU
(
)O}i{OOKOMENU
Sound
Clock
{
OffOtime
OnOtime
{
AutoOoff
{
menu
{
(
)O}i{OOKOMENU
Time
Language
Input
{
BlueOback
{
ChildOlock
{
menu
{
(
)O}i{OOKOMENU
Special
TV programme
8
Storage
System
menu
TV
stations
up
Setting
programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up
to 100 TV stations can be stored
Note
:
In
by
models up to 200 TV stations
some
Auto programme
can
O
O
be stored.
tuning
OiO
O
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto prog..
Press the G button to display the Auto prog. menu.
OiO
4.
5.
6.
7.
8.
9.
O
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo.
Option:
In
some
models, you
can
only
1
2
3
4
5
6
7
8
9
MENU
0
PR
VOL
()
VOL
OK
PR
()
select Start.
Note :
a.
Turbo is faster than Normal and in some models, these
searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual menu.
10. Press the G button to
Normal
{000
begin
auto
programming.
0
Turbo
OO
{0000
OOO
OO
(Normal search)
OOO
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Prog. edit menu
appears on the screen. See the 'Programme edit' section to edit
the stored programme.
11.
Repeatedly
viewing.
press the MENU button to return to normal TV
9
Setting
Auto programme scan
To automatically scan the pictures of stored programmes, press
theD( DD ) or E( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
O
O
OiO
TV
stations
up
E
To stop auto programme
buttons.
scanning,
Manual programme
tuning
press any button except VCR
O
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
1
2
3
4
5
6
7
8
9
MENU
OiO
0
4.
5.
PR
VOL
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual.
Press the G button to display the Manual menu.
()
VOL
OK
PR
6.
7.
8.
()
9.
10.
11.
12.
13.
14.
15.
O
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '0' (or '00') in front of it, i.e.
'05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Search
{
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting
station name
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0
to 9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Assigning
1.
Repeat
2.
3.
4.
5.
6.
7.
TV
stations
up
a
O
O
OiO
O
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
If the
Only
a
set with
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
reception
Booster to On.
3.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
4.
Press the D / E button to select On
1
2.
Repeat
pull-down
5.
6.
or
Off
on
MENU
the Booster
PR
menu.
()
Press the OK button.
Repeatedly
viewing.
press the MENU button to return to normal TV
VOL
VOL
OK
PR
()
11
TV
stations
up
Setting
{
{
{
{
AutoOprog.
Manual
Prog.Oedit
Favourite
(
)O}i{OOKOMENU
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
Station menu.
2.
Press the G button and then D / E button to select Prog. edit.
Press the G button to display the Prog. edit menu.
3.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
1
2
3
4
5
6
(
)O}i{OOKOMENU
Deleting
1.
7
8
9
2.
a
programme
Select a programme to be deleted with the D / E
Press the RED button twice.
The selected
MENU
0
grammes
Copying
1.
2.
PR
()
VOL
VOL
PR
()
2.
3.
all the
F / G button.
following
F / G button.
or
All the
one
a
pro-
programme
Select a programme to be copied with the D / E
Press the GREEN button.
Moving
1.
a
are
programme is deleted,
shifted up one position.
or
following
programmes
are
shifted down
position.
programme
programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
Select
a
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
Move0Off
(
)O}i{OMENU
programme number
Select a programme number to be skipped with the D / E or
F / G button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
a
Repeatedly
12
press the MENU button to return to normal TV
viewing.
Setting
TV
stations
up
Favourite programme
O
O
This function lets you select your favourite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite.
3.
Press the G button to
display the Favourite
menu.
OiO
O
menu.
O
00
O
Favourite
{
OiOOO
4.
Press the D / E button to select
5.
desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
6.
Select
You
7.
8.
--
-----.
a
can
store up to 8 programmes.
Press the OK button.
Repeatedly
viewing.
Repeatedly
press the MENU button to return to normal TV
MENU
press the FAVOURITE button to select stored favourite
PR
programmes.
VOL
()
VOL
OK
PR
()
FAVOURITE
13
Setting
TV
stations
up
Calling
You
the programme table
check the programmes stored in the memory
the programme table.
can
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
OOOOCO1DOOOO5OOSO69
O1OOCO03OOOO6OOSO17
O2OOCO12OOOO7OOSO22
O3OOSO66OOOO8OOCO09
O4OOSO67OOOO9OOCO11
(
)O}i{OOKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
VOL
OK
PR
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
()
a
()
LIST
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV
14
viewing.
Picture
Note: Picture
PSM
menu
options
are
adjustment
not available for RGB
input source.
TurboOPic.
(Picture Status Memory)
CSM
Contrast
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
1.
2.
3.
PSM
PSM
{
TurboOPic. {
CSM
Contrast
Brightness
C olour
Sharpness
{
{
{
{
{
Brightness
Colour
Sharpness
{
{
{
{
{
{
{
(
)O}i{OOKOMENU
Dynamic
Standard
Mild
Game
User
(
)O}i{OOKOMENU
Press the OK
4.
5.
Repeatedly
viewing.
You
or F
button.
press the MENU button to return to normal TV
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
CSM
You
or
(Colour Status Memory)
can
select the
bluish,
1.
2.
3.
4.
MENU
as
you
picture
prefer.
colour status;
standard, reddish, greenish
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select CSM.
Press the G button and then D / E button to select Standard,
Reddish, Greenish or Bluish on the CSM pull-down menu.
Repeatedly press the MENU button to return to normal TV
PR
VOL
()
VOL
OK
PR
()
viewing.
Picture
You
2.
PSM
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
1.
adjustment
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
CSM
Contrast
{
{
{
{
Brightness
{
C olour
{
{
TurboOPic.
Sharpness
100
(
)O}i{OOKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
(
}i{O)OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
some
models, the
set will
Press the EYE/* button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
but
condition
EYE/
Note
a.
b.
PICTURE
TURBO/
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
EYE function is not available for RGB input source.
picture
selection
When this function is on, the
tinct than normal picture.
Repeatedly
Note
(option)
picture
will be
more
brilliant and dis-
press the TURBO PICTURE button to switch
(Turbo Picture off)
on or
off.
(Turbo Picture on)
:
a.
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
b.
TURBO PICTURE function is not available for RGB input
source.
16
in green does not appear continuin yellow appears each time the picture
:
Turbo
PSM
display
the display
changes.
Sound
adjustment (option)
Sound
adjustment is an optional function only
adjustment can perform this function.
SSM (Sound Status Memory)
You
can
Speech
1.
2.
3.
a
set with sound
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
b. Select a sound band by pressing the F / G button.
SSM
{
Flat
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
{
{
{
{
{
{
{
Music
Movie
{
{
{
{
{
{
{
{
(
)O}i{OOKOMENU
Speech
User
(
)O}i{OOKOMENU
MENU
Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
c.
Equalizer
PR
VOL
()
VOL
OK
0.1O0.4O1.0O4.0O10OkHz
PR
()
()O}{O OKOMENU
(RF STEREO, Flat)
SSM/
Repeatedly
You
press the MENU button to return to normal TV
viewing.
recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM/* button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
can
also
If you press the SSM/* button after making appropriate
adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
:
Sound
1.
2.
adjustment
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL (option), Balance, Treble, Bass or Woofer
(option).
3.
4.
5.
Press the G button.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
17
Sound
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
{
{
{
{
{
{
{
{
X-WAVE
You
1.
2.
3.
(
)O}i{OOKOMENU
adjustment (option)
can
(Wireless Sound) (option)
also listen to the sound
through
the FM receiver.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to tune in a frequency on the X-WAVE pull-down menu.
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
{
{
{
{
{
{
{
{
Off
87.7
87.9
88.1
88.3
88.5
88.7
88.9
Off
106.7
106.9
107.1
107.3
107.5
107.7
107.9
or
(
)O}i{OOKOMENU
4.
Match the TV's
Some models
1.
2.
3.
MENU
PR
VOL
are
frequency
displayed
as
shown below.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select X-WAVE.
Press the G button and then D / E button to select Set Freq.
SSM
TurboOSnd.
AVL
Balance
Woofer
Treble
Bass
X-WAVE
()
{
{
{
{
{
{
{
{
X-WAVE
88MHz
or
SetOFreq
{
FMO95.0MHz
(
}{i0-9OOKOMENU
)O}i{O OKOMENU
PR
4.
()
107MHz
Off
VOL
OK
and the FM receiver's.
Press the G button to tune in
a
frequency
the X-wave
on
menu.
5.
SOUND
TURBO/
Usethenumber0to9orpresstheF/Gbuttontomatchthe
TV's frequency and the FM receiver's.
Note:
a. If the reception is poor or weak, select a different frequency.
b. For best results, there should be no more that 5m (16.4ft)
between the TV and FM Receiver.
In certain areas, the FM transmitter ability may be weak, such
c.
as near a broadcast tower.
d. The reception sensitivity may depend on the kinds of receiver
(FM radio).
Turbo sound selection
(option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
TURBO
(Turbo
18
Sound
off)
(Turbo
Sound
on)
Sound
adjustment (option)
Sound output selection (option)
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
:
:
R+R
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II/
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II/* button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
equipped
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Setting the
o
1.
oo
2.
3.
OiO
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
io
O
oi
o
oo
OiO
4.
5.
6.
O
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
1.
MENU
2.
3.
PR
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
()
o
VOL
VOL
OK
o
io
oi
o
PR
()
OiO
4.
5.
6.
7.
O
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
.
Auto off
If you select On on the Auto off pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes
after a TV station stops broadcasting.
1.
2.
3.
4.
5.
20
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto off.
Press the G button and then D / E button to select On or Off on
the Auto off pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
Inputs
be set for TV
can
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a
Press the MENU button and then D / E
Special
2.
3.
o
is connected to the set.
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
o
video
OiO
O
button to select the
menu.
Press the G button and then D / E button to select
Press the G button and then D / E button to select
AV2), AV3 (option), S-VIDEO (option)
(option) on the Input pull-down menu.
or
or
Input.
TV, AV (AV1
COMPONENT
o
1
2
3
4
5
6
7
8
9
0
TV/AV
o
OiO
AV
or
AV1
MENU
O
VCR connected to the Euro scart socket
:
of the set
AV2 : VCR connected to the AV2 sockets of the set
or
phone
jack
AV3
:
(option)
(option)
VCR connected to the AV3 sockets of the set
S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart
socket on the set (option)
COMPONENT
sockets
4.
on
Repeatedly
:
DVD
the set
Player
(option)
can
select the TV
()
VOL
OK
connected to the COMPONENT
PR
press the MENU button to return to normal TV
Alternatively you
PR
or
AV mode
by pressing
()
viewing.
the TV/AV
button.
In AV
mode,
to return to TV
mode, press the
D / E or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automat-
ically
switched to AV
or
AV1 mode when
an
AV
signal
is
you want to keep on watching TV mode, press the D / E
buttons. Press the TV/AV button to return to AV modes.
input.
or
But if
NUMBER
21
Other functions
Child lock
o
The TV
o
can
be set
so
control it. This feature
that the remote control handset is needed to
can
be used to
prevent unauthorized view-
ing.
OiO
1.
O
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
4.
Press the OK
5.
Repeatedly
viewing.
2.
or
F button.
press the MENU button to return to normal TV
With the lock on, the display Child lock on appears on the
if any button on the panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the panel is pressed while displaying the menus.
MENU
Blue back
PR
VOL
(option)
()
VOL
OK
PR
()
If you select On
ground appears
1.
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off
on the Blue back pull-down menu.
4.
Press the OK
5.
Repeatedly
viewing.
2.
or
F button.
press the MENU button to return to normal TV
Note : In the AV mode, Component mode, the blue
doesn't appear on the screen.
22
screen
background
Other functions
Games
Game is
optional function, only
by using the remote control
an
function
1.
(option)
3.
4.
set with game
can
perform
o
this
o
handset.
Press the MENU button and then D / E
Special
2.
a
button to select the
OiO
menu.
O
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
a
by using
game and then press the OK
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
MENU
Sleep
TV/AV
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
PR
()
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
-
-
VOL
-
PR
()
of minutes selected.
Note :
a.
To view the
SLEEP
remaining sleep time, press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
-
-
23
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
LL
PB
PR
DVD INPUT
(480i)
COMPONENT
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Aerial socket
1.
VCR
2.
3.
4.
ANT IN
LL
Y
PB
5.
PR
DVD INPUT
COMPONENT
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
(480i)
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Audio/Video in/out sockets
1.
VCR
2.
3.
R
AUDIO
L/MON
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
VIDEO
also record programmes received
via audio/video out sockets.
can
tape
AV2
Euro scart socket
1.
2.
OK
VOL
by
the TV
on
video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
MENU
(option)
PR
/M NO
2
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV1) mode automatically. But if you want to keep on watching TV mode, press
the D / E or NUMBER buttons.
VCR
Otherwise press the TV/AV button on the remote control handset to select AV (or AV1). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
video
tape.
1
AV1
ANT IN
VCR
24
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
Connection of external
S-video / Audio in sockets
When
connecting
equipment
(S-AV) (option)
the S-video socket of the VCR to the S-VIDEO
socket of the set, the
picture quality
will be further
improved.
ANT IN
OUT
75Ω
VIDEO
(L)
-
AUDIO -(R)
IN
1.
Connect the S-video socket of the VCR to the S-VIDEO socket
2.
of the set.
Connect the audio cable from the VCR to the AUDIO sockets of
VCR
the set.
3.
4.
Select AV3 by pressing the TV/AV button
Press the PLAY button on the VCR.
The VCR
playback picture
appears
on
the
repeatedly.
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
ANT IN
75Ω
OUT
VIDEO
AUDIO
IN
Component
1.
2.
in sockets
Connect the COMPONENT video
output sockets (Y Cb Cr, Y
Pb Pr
player
or
Y B-Y
4.
R-Y) of the
(Y PB PR) on
DVD
VCR
to the COMPONENT
INPUT sockets
the set.
Connect the audio cable from the DVD
sockets of AV
3.
(option)
to AUDIO IN
player
(or AV1).
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD player.
ANT IN
Y
LL
Headphone
Only
playback picture
socket
appears
on
a
headphone
the
screen.
DVD
socket
can
COMPONENT
perform
VIDEO
(L/MONO) AUDIO (R)
IN
(option)
models which have
PR
(480i)
OUT
AV
The COMPONENT
PB
DVD INPUT
Player
this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the F / G button.
If you press the MUTE
switched off.
RAUDIO
L/MON
button, the sound from the headphone's is
VIDEO
AV2
OK
VOL
PR
L/MONO
2
25
MEMO
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement