LG | XC62 | Owner's Manual | LG XC62 Owner's manual

LG XC62 Owner's manual
W2_XC62_ENG_MFL38289225
MODEL : XC62
ENGLISH
There is so much your Hi-Fi system can do
Record from a CD
or radio to cassette
Go to page 8
Lull me to sleep
and wake me up
Go to pages 5 & 9
Contents
Setting up
3
About Player
4
About Remote control
5
Listening to CDs
6
Connecting your portable USB player
6
About MP3/WMA
6
Listen to cassette tapes
7
Listening to the radio
7
Recording
8
Listening to music from your portable player 8
USER EQ
9
Setting the Clock
9
Use your player as an alarm clock
9
Safety Precaution
10
Troubleshooting
11
Specifications
11
Play CDs and
cassettes
Go to pages 6 & 7
Play from many
external devices
Go to page 8
Vinyl deck
Portable CD player
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
2
MICRO Hi-Fi SYSTEM ] USER GUIDE
MP3 player
Setting up
ENGLISH
1 Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal marked L
(left) + (plus) and - (minus). Cables from the right-hand speaker are
connected to the terminal marked R (right) + (plus) and - (minus).
To connect the cable to the player, press each of the four square
plastic finger pads on the rear of the player. The connector will open
ready to receive a cable.
Put the batteries in the remote control
3
#
Make sure that the + (plus) and - (minus) on
the batteries (size AAA) match those on the
remote control.
2 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
3 Connect the FM aerial
The reception will be at its best when the two
loose ends of the aerial are in a straight line
and horizontal.
4 Plug the power plug into a wall
socket
Connect an auxiliary device
Connect an auxiliary device such as a TV or VCR
via the rear mounted AUX connector and press
FUNCTION repeatedly to select AUX.
MICRO Hi-Fi SYSTEM ] USER GUIDE
3
About Player
1/]] (POWER)
You can set up the unit into an economic
power save mode. In the power-on status,
press and hold 1/] for about 3 seconds.
To cancel power save mode, press 1/].
VOLUME
Control the volume when using any function.
PORT.IN
For connecting a portable device and playing it
through the system’s speakers.
Headphone jack
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.
eXtreme Dynamic Sound System
Reinforce the treble, bass and surround sound
effect. XDSS ON will show in the display. Press
again for NORMAL.
MP3 Optimizer
Optimizes compressible MP3 files so that it
improves the bass sound. (XDSS ON → MP3-OPT ON → NORMAL)
4
MICRO Hi-Fi SYSTEM ] USER GUIDE
TIMER
With the TIMER function you can turn CD play
and radio reception on or off at a desired time.
(see Use your player as an alarm clock)
CLOCK
For setting the clock and checking the time.
(see Setting the Clock)
SET/RDS (OPTIONAL)
SET confirms the time you have selected when
setting the clock. (see Setting the clock) RDS
shows information about radio stations. (see
Listening to the radio)
USB connector
Connect a remote USB compatible player
here.
CD SYNC
The CD synchro recording function dubs a
complete CD and programmed titles
automatically into a cassette.
(see CD Synchronized Recording)
PLAY MODE
You can set the tape to play one side
, both
sides
, or both sides six times
, by
pressing PLAY MODE one or more times.
(see Listen to cassette tapes)
About Remote control
Search for a folder of MP3/WMA files
When a CD containing MP3/WMA files in
several folders is being played, press
PRESET/FOLDER to select the folder you
want to play.
Choose a ‘preset number’ for a radio
station (see Listening to the radio)
Fall asleep while listening to your player
Firstly, start a radio station or music. Press
SLEEP one or more times to select delay
time between 10 and 180 minutes, after the
player will turn off.
Use when playing a CD
Moving to other cards
In case that more than two memory cards are
connected to the USB port, press D.SKIP to
select a card you want to use.
Optimise the sound
The function creates the optimum sound for
you to play of the original sound. Each time
you press XTS Pro, “XTS -- PRO ON” or
“XTS -- PRO OFF” is displayed in turn. (The
XTS Pro function will not be operated when a headphone has been connected.)
See information about your music
MP3/WMA files often come with tags. The tag
gives the Title, Artist, Album or Time information. Press MP3 Info while a file is playing to
see this information.
Dimm the display light
Temporarily stop the sound
Press the button again to return to the sound.
To change the functions
Change the functions between FM, AM, CD,
AUX, PORTABLE, TAPE etc.
Listen to your tracks again and again
Press REPEAT once to repeat the track currently playing. Press REPEAT twice to repeat
the whole CD, or if you’re listening to the
whole folder of MP3/WMA CD. The display
will show what is being repeated.
For storing radio stations
If you have saved radio stations using
PROGRAM/MEMO, you can scroll through
them and select one. (see Listening to the
radio)
Listen to your tracks in any order
(see Listening to the CDs)
Use when playing a cassette tape
Search radio stations by radio type
- OPTIONAL (See Listening to the radio).
Set the system playing CD tracks or
MP3/WMA files in a random order. Press
again to cancel.
MICRO Hi-Fi SYSTEM ] USER GUIDE
5
Listening to CDs
ON PLAYER
1. Open the CD drawer:
2. Insert the CD:
Label facing up
3. Close the CD drawer:
The display will show the total
number of tracks (files)
4. Select the CD function:
5. Start the CD playing:
6. To stop a CD playing:
ON REMOTE
Z CD OPEN
Connecting your portable
USB player
The advantage of connecting your portable USB player through the
system’s USB port is that the portable device can be controlled from the
system. Connect the portable player to the system using a USB cable
(not supplied).
Z CD OPEN
FUNCTION
FUNCTION
bB/[] PLAY
x STOP
B/[]
x
Listening to CDs - more you can do
Pause or restart a CD
Press bB/[] PLAY on the front panel or B/[] on the remote control during
playback. Press this button again to resume play.
1. Select the USB function:
2. The display will show
CHECKING, followed by the
number of files displayed:
3. Press:
4. Before disconnecting the
portable USB player, change to
any other function by pressing:
5. Remove the USB player:
ON PLAYER
ON REMOTE
FUNCTION
USB
bB/[] PLAY
FUNCTION
B/[]
FUNCTION
Search for a section within a track
Hold bb/BB on the front panel or .bb/BB> on the remote control
during playback. (This function is only available for Audio CD’s.)
Skip to another track
Press bb/BB on the front panel or .bb/BB> on the remote control.
Listen to your tracks in any order
Up to 20 tracks on a CD can be listened to in the order of your choice.
Insert a CD and wait for it to be read. Press PROGRAM/MEMO on the
remote control, then use bb/BB on the front panel or .bb/BB> on
the remote control to select the track. Press PROGRAM/MEMO again to
save and select the next track. Press bB/[] PLAY or B/[]. To clear your
selection, press x (or x STOP), PROGRAM/MEMO, x (or x STOP).
6
MICRO Hi-Fi SYSTEM ] USER GUIDE
NOTE : Some portable devices are not compatible with this system.
About MP3/WMA
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
• File names should be named using 30 letters or less and must incorporate “.mp3”,“.wma” extension e.g. “********.MP3” or “********.WMA”
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
Listening to the radio - more you can do
Listen to cassette tapes
ON PLAYER
1. Open the tape door:
2. Insert the tape:
3. Close the tape door:
4. Select the TAPE function:
5. Start the tape playing:
6. To stop a tape playing:
Look for radio stations automatically
ON REMOTE
Z PUSH EJECT
Press TUNE.-/TUNE.+ on the front panel (or press TUN.- /TUN.+ on the
remote control) for more than 0.5 second. The tuner will scan automatically
and stop when it finds a radio station.
Delete all the saved stations
FUNCTION
FUNCTION
bB/[] PLAY
x STOP
b or B
x (TAPE STOP)
Listen to cassette tapes - more you can do
To Play Fast backward or Forward
After pressing bb/BB during playback, or stop, press b or B at a point you
want.
Press and hold PROGRAM/MEMO for two seconds. “ERASE ALL” shows.
Press PROGRAM/MEMO to erase all the saved stations.
Choose a ‘preset number’ for a radio station
Select a station you want by pressing TUNE.-/TUNE.+ on the front panel or
TUN.- /TUN.+ on the remote control. Press PROGRAM/MEMO, the station
flashes. Press PRESET/FOLDER on the remote control to select the preset
number you want. Press PROGRAM/MEMO to save it.
Improve poor FM reception
Press ST./MONO. This will change the tuner from stereo to mono and usually improve the reception.
See information about your radio stations - OPTIONAL
Listening to the radio
Make sure both the FM and AM aerials are connected.
1. Select either FM or AM:
2. Select the radio station:
3. To ‘save’ a radio station:
A preset number will show in
the display.
4. To select a ‘saved’ station:
5. To confirm press:
Up to 50 radio stations can be
saved.
ON PLAYER
ON REMOTE
FUNCTION
TUNE.-/ TUNE.+
FUNCTION
TUN.-/ TUN.+
PROGRAM/MEMO
PRESET/FOLDER
PROGRAM/MEMO
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS on the remote control several times to
view the information.
PTY - Programme Type, such as News, Sport, Jazz Music.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Programme Service name, the name of channel.
You can search the radio stations by programme type by pressing PTY.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and hold PTY SEARCH. The
tuner will search automatically. When a station is found the search will stop.
MICRO Hi-Fi SYSTEM ] USER GUIDE
7
Listening to music from
your portable player
Recording
Record from a CD or radio to cassette
ON PLAYER
1. Open the tape door:
2. Insert a blank tape:
3. Close the tape door:
4. Select a mode (FM/AM, CD,
USB, AUX or PORTABLE) in
which you want to record:
- For CD, press bB/[] or B/[].
5. Start the Recording:
6. To stop a Recording:
ON REMOTE
Z PUSH EJECT
FUNCTION
The player can be used to play the music from many types of portable
player.
FUNCTION
z/[]
x
CD Synchronized Recording
ON PLAYER
1. Open the tape door:
Z PUSH EJECT
2. Insert a blank tape:
3. Select the CD function:
FUNCTION
4. Start the Recording:
CD SYNC
The synchronized recording is
started automatically after about
7 seconds.
5. To stop a Recording:
x STOP
8
MICRO Hi-Fi SYSTEM ] USER GUIDE
ON REMOTE
FUNCTION
1. Connect the portable player by
plugging the unit into PORT. IN
on the front of the player
2. Turn the power on:
3. Select the PORTABLE
function:
4. Turn the portable player on
and start it playing:
ON PLAYER
ON REMOTE
1 /]]
FUNCTION
POWER
FUNCTION
Use your player as an alarm clock
USER EQ
You can listen to music with the desired sound effect (BASS, MIDDLE
and TREBLE).
ON PLAYER
1. Select a “USER EQ”:
2. When “USER EQ” is
displayed, press:
3. Select the sound effect you
want among BASS, MIDDLE
or TREBLE:
4. Adjust sound level (MIN, -4 to
+4, MAX):
5. Repeat the steps from 3 to 4
to set other sound effect:
6. Press:
ON REMOTE
EQ master
SET
bB/[] PLAY
or
x STOP
bb or BB
SET
Setting the Clock
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either:
AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour
display).
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:
ON PLAYER
ON REMOTE
1 /]]
CLOCK
POWER
CLOCK
Press and hold TIMER for two seconds. Each function, TUNER, CD, USB,
TAPE flashes for two seconds. Press SET when the function you want to
be woken by is showing. If you choose TUNER, ‘PLAY’ and ‘REC’ flash,
PLAY and REC. Choose one of them.
If you choose TUNER and PLAY you will be shown the stations you have
saved as presets. Use bb or BB to select the station you want, then press
SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use bb or BB to change the hours and minutes
and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use bb or BB to change the hours and
minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use bb or BB to change the volume and SET to save. Switch the system
off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
bb or BB
SET
bb or BB
SET
bb or BB
SET
MICRO Hi-Fi SYSTEM ] USER GUIDE
9
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects
filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Disposal of your old appliance
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug or other
similar surface. This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the
product.
This product is manufactured to comply with the EEC DIRECTIVE 2004/108/EC
and 2006/95/EC.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for
future reference. Should the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation
when open. DO NOT STARE INTO BEAM.
10
MICRO Hi-Fi SYSTEM ] USER GUIDE
Troubleshooting
Symptom
No power.
No sound.
The unit does not
start playback.
The remote
control does not
work properly.
Unable to record.
Specifications
Cause
Correction
• The power cord is disconnected.
• Plug the power cord into the wall
outlet securely.
• The power of the external source • Switch on the external source
equipment is turned off.
equipment.
• The speaker cable is connected
• Set the speaker cable to the
to a wrong position.
correct position, then turn on the
unit again by pressing POWER.
• An unplayable disc is inserted.
• Insert a playable disc.
• The disc is placed upside down.
• Place the disc with the playback
side down.
• The disc is not placed within the
• Place the disc on the disc tray
guide.
correctly inside the guide.
• The disc is dirty.
• Clean the disc.
• The remote control is not pointed • Point the remote control at the
at the remote sensor of the unit.
remote sensor of the unit.
• The remote control is too far from • Operate the remote control within
the unit.
about 23 ft (7 m).
• There is an obstacle in the path
• Remove the obstacle.
of the remote control and the unit.
• The batteries in the remote
• Replace the batteries with new
control are exhausted.
ones.
• Record protect tabs are removed. • Cover holes on back edge of tape
with tap.
General
Net Weight
3.4 kg
External dimensions (WxHxD) 170 x 243 x 282 mm
Tuner
FM Tuning Range
AM Tuning Range
87.5 - 108.0 MHz or 65 - 74 MHz,
87.5 - 108.0 MHz
522 - 1620 kHz or 520 - 1720 kHz
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
30 W + 30 W
0.5 %
40 - 20000 Hz
75 dB
CD
Frequency response
Signal-to-noise ratio
Dynamic range
40 - 20000 Hz
75 dB
75 dB
Cassette tape player
F.F/REW Time
Frequency Response
Signal to Noise Ratio
Channel Separation
Erase Ratio
120 sec (C-60)
250 - 8000 Hz
43 dB
45 dB (P/B)/45 dB (R/P)
50 dB (MTT-5511)
Speakers (XCS62F)
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
1 Way 1 Speaker
4Ω
75 - 17000 Hz
83 dB/W (1m)
30 W
60 W
144 x 243 x 171 mm
1.47 kg
Designs and specifications are subject to change without notice.
MICRO Hi-Fi SYSTEM ] USER GUIDE
11
P/NO : MFL38289225
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising