LG | BP556 | LG BP556 Owner’s Manual

OWNER’S MANUAL
Network 3D
Blu-ray Disc™ /
DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP556
*MFL69675819*
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. To disconnect power from the mains,
pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Getting Started
This device is equipped with a portable battery or
accumulator.
Disposal of waste batteries/accumulators
1. This symbol may be combined with chemical
symbols for mercury (Hg), cadmium (Cd) or lead
(Pb) if the battery contains more than 0.0005%
of mercury, 0.002% of cadmium or 0.004% of
lead.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
3. The correct disposal of your old batteries/
accumulators will help to prevent potential
negative consequences for the environment,
animal and human health.
NOTICE: For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom or rear of the
apparatus.
4. For more detailed information about disposal of
your old batteries/ accumulators, please contact
your city office, waste disposal service or the
shop where you purchased the product. (http://
www.lg.com/global/sustainability/environment/
take-back-recycling/global-network-europe)
Disposal of your old appliance
1. This crossed-out wheeled bin symbol
indicates that waste electrical and
electronic products (WEEE) should be
disposed of separately from the municipal
waste stream.
2. Old electrical products can contain
hazardous substances so correct disposal
of your old appliance will help prevent
potential negative consequences for the
environment and human health. Your old
appliance may contain reusable parts that
could be used to repair other products,
and other valuable materials that can be
recycled to conserve limited resources.
3. You can take your appliance either to the
shop where you purchased the product,
or contact your local government waste
office for details of your nearest authorised
WEEE collection point. For the most up to
date information for your country please
see www.lg.com/global/recycling.
Pb
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
1
Getting Started
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
CAUTION: Only use the AC adapter supplied with
this device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage to
the device and void your warranty.
3
4
1
Getting Started
Getting Started
Declaration of Conformity
Notes on copyrights
Hereby, LG Electronics European Shared Service
Center B.V., declares that this Network 3D
Blu-ray Disc™ / DVD Player is compliant with the
essential requirements and other relevant provisions
of Directive 1999/5/EC. The complete Declaration of
Conformity may be requested through the following
postal address:
yy Because AACS (Advanced Access Content System)
is approved as content protection system for Bluray Disc format, similar to use of CSS (Content
Scramble System) for DVD format, certain
restrictions are imposed on playback, analog
signal output, etc., of AACS protected content.
The operation of this product and restrictions on
this product may vary depending on your time of
purchase as those restrictions may be adopted
and/or changed by AACS after the production of
this product.
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission
system, intended for use in all EU member states and
EFTA countries.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected content.
To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an
authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/or
criminal liability.
Getting Started
Important Notice for TV color system
The color system of this player differs according to
currently playing discs.
Only the multi system color TV can receive all signals
output from the player.
yy If you have a PAL color system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system color TV changes the color
system automatically according to input signals.
In case that the color system is not changed
automatically, turn it off and then on to see normal
images on screen.
yy Even if the disc recorded in NTSC color system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
For example, when the player plays the disc recorded
in the NTSC color system, the image is output as an
NTSC signal.
5
6
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
8Introduction
8
– Playable discs and symbols used in this
manual
9
– About the “7” symbol display
9
– Regional code
9
– System Select
10 Remote Control
11 Front Panel
11 Rear Panel
2Connecting
12
12
13
13
14
15
16
16
16
18
18
Connecting the AC Adapter
Connecting to your TV
– What is SIMPLINK?
– Resolution setting
Connecting to an Amplifier
– Connecting to an amplifier via HDMI
output
– Connecting to an amplifier via digital audio
output
Connecting to your Home Network
– Wired network connection
– Wired network setup
– Wireless network connection
– Wireless network setup
3
System Setting
15
21 Initial Setup
22Settings
22 – Adjust the setup settings
22 – [NETWORK] menu
24 – [DISPLAY] menu
25 – [LANGUAGE] menu
26 – [AUDIO] menu
27 – [LOCK] menu
28 – [OTHERS] menu
4Operating
30
30
30
30
31
31
32
33
34
34
34
34
35
35
36
36
36
36
37
37
38
38
39
40
40
40
40
41
41
41
41
42
42
43
43
43
44
44
45
45
45
45
46
46
Home Menu Display
– Using [HOME] menu
Playing the Linked Devices
– Playing a disc
– Playing Blu-ray 3D disc
– Playing a file on disc/USB device
– Playing a file on Android device
– Playing a file on a network server
Using Home Network Server for PC
– About SmartShare PC Software (DLNA)
– Downloading SmartShare PC Software
(DLNA)
– Installing SmartShare PC Software (DLNA)
– Sharing files and folders
– System requirements
General Playback
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last scene memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
– Playing file encoded in 3D
Advanced Features
– Enjoying BD-Live™
– LG AV Remote
– Private Sound Mode
Using the Premium
Using Audio Cast
Table of Contents
7
5Troubleshooting
47Troubleshooting
47 – General
48 – Network
49 – Picture
49 – Customer support
49 – Open source software notice
6Appendix
Controlling a TV with the Supplied Remote
Control
50 – Setting up the remote to control your TV
51 Network Software Update
51 – Network update notification
51 – Software update
53 Additional Information
53 – File requirement
54 – AVCHD (Advanced Video Codec High
Definition)
55 – About DLNA
55 – Certain system requirements
55 – Compatibility notes
56 Audio Output Specifications
58 Area Code List
59 Language Code List
60 Trademarks and Licenses
62Specifications
63Maintenance
63 – Handling the unit
63 – Notes on discs
64 Important Information relating to Network
Services
1
2
50
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
3
4
5
6
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Blu-ray
y
u
i
r
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm, 12 cm)
DVD-RW (VR)
(8 cm, 12 cm)
Audio CD
(8 cm, 12 cm)
CD-R/RW
(8 cm, 12 cm)
Note
–
Caution
–
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
yy BD-R/RE discs that contain Video, Audio or Photo
files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Video mode and finalized only
yy Supports the dual layer disc also
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Video, Audio or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
r
VR mode and finalized only
t
Audio CD
y
u
i
yy CD-R/RW discs that contain Video, Audio or
Photo files.
,
>
Indicates special notes and operating features.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible damages
from abuse.
Getting Started
,,Note
yy Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW)
discs cannot be played on the unit.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play
because of the settings of the application
software used to create the disc. (Check with
the software publisher for more detailed
information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and audio from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting the
option to Live System, you cannot use it on
LG player. (Mastered/Live File System : Disc
format system for windows Vista)
About the “7” symbol display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD discs
labeled same as the rear of the unit or “ALL”.
System Select
Open the disc tray using the B (OPEN/CLOSE)
button and then, press and hold M (PAUSE) for more
than five seconds to change the color system (PAL /
NTSC /AUTO).
1
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
9
10 Getting Started
Remote Control
1
Getting Started
• • • • • • a • • • • • • • • • • • • d • • • • • •
1 (POWER): Switches the player
ON or OFF.
Colored (R, G, Y, B) buttons: Use
to navigate BD-ROM menus. They
are also used as shortcut buttons
for specific menus.
B (OPEN/CLOSE): Opens and
closes the disc tray.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password or network
connection.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • • •
c/v (SCAN): Searches
backward or forward.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Z (STOP): Stops playback.
d (PLAY): Starts playback.
M (PAUSE): Pauses playback.
• • • • • • c • • • • • •
HOME (b): Displays or exits the
[Home].
Battery Installation
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
INFO/MENU (m): Displays or
exits On-Screen Display.
Remove the battery cover on the
rear of the remote control, and
insert a R03 (size AAA) battery
with 4 and 5 matched correctly.
Direction buttons (W/S/A/
D): Selects an option in the menu.
ENTER (b): Acknowledges menu
selection.
BACK (1): Exits the menu or
returns to the previous screen.
?: This button is not available.
DISC MENU: Accesses menu on a
disc.
TV Control Buttons: See page 50.
Getting Started 11
Front Panel
1
Getting Started
a Disc Tray
d R (OPEN / CLOSE)
b Power Indicator
e 1/! (POWER)
c Remote Sensor
f USB Port
Rear Panel
COAXIAL
a b
c d
a DC IN 12V (AC adapter input)
c HDMI OUT
b LAN port
d DIGITAL AUDIO OUT (COAXIAL)
12 Connecting
Connecting the AC
Adapter
Connect the unit to the power supply with the
supplied AC adapter.
Rear of the unit
2
Connecting to your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on the
player to the HDMI jack on a HDMI compatible TV or
monitor.
COAXIAL
COAXIAL
Connecting
Rear of the unit
COAXIAL
Plug into a power
source.
HDMI cable
TV
yy Contact an electrical parts distributor for
assistance in selecting a suitable AC plug adapter
or AC cord set.
Set the TV’s source to HDMI (Refer to TV’s owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
Connecting 13
Additional information for HDMI
What is SIMPLINK?
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then
switch on this player.
-- The connected device’s video input is set
correctly for this unit.
yy Not all HDCP-compatible HDMI or DVI devices will
work with this player.
-- The picture will not be displayed properly with
non-HDCP device.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution setting” on page 13)
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (page 25).
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the player and then turn it on again.
Controllable functions by LG TV’s remote control; Play,
Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution using
[Settings] menu.
1. Press HOME (b).
2. Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/S to select [DISPLAY] option then press
D to move to the second level.
4. Use W/S to select the [Resolution] option then
press ENTER (b) to move to the third level.
yy When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m).
5. Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
2
Connecting
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
14 Connecting
,,Note
yy If your TV does not accept the resolution you
have set on the player, you can set resolution
to 576p as follows:
1.Press B to open the disc tray.
2.Press Z (STOP) for more than 5 seconds.
2
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
Connecting
yy If you select a resolution that your TV does
not accept, the warning message will appear.
After resolution change, if you cannot see
the screen, please wait 20 seconds and the
resolution will automatically revert back to
the previous resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or 50
Hz depending both on the capability and
preference of the connected TV and based on
the native video frame rate of the content on
the BD-ROM disc.
Connecting to an
Amplifier
Make one of the following connections, depending on
the capabilities of your existing equipment.
yy HDMI audio connection (page 15)
yy Digital audio connection (page 15)
Since many factors affect the type of audio output,
see “Audio Output Specifications” for details (page
56).
About Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this, you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player. Check
the logos on the front of the Audio/Video receiver
and the manual. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or
DTS-HD)
Connecting 15
Connecting to an amplifier via
HDMI output
Connecting to an amplifier via
digital audio output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a HDMI
cable.
Connect the player’s COAXIAL OUT jack to the
corresponding in jack on your amplifier using a coaxial
digital audio cable.
Rear of the unit
Rear of the unit
COAXIAL
COAXIAL
2
COAXIAL
Coaxial cable
HDMI cable
Receiver/Amplifier
HDMI
cable
TV
Receiver/Amplifier
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 26.)
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack (Refer to amplifier’s
owner’s manual).
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 26.)
Connecting
COAXIAL
16 Connecting
Connecting to your
Home Network
2
Broadband
service
Connecting
This player can be connected to a local area network
(LAN) via the LAN port on the rear panel or the
internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices connect
directly to the network and are not subject to radio
frequency interference.
DLNA certified servers
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a commercially
available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the
LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
yy To set your PC as a DLNA server, install the
SmartShare PC Software on your PC. (page
34)
COAXIAL
COAXIAL
Rear of the unit
Wired network setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Connecting 17
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/A/
D and numerical buttons. If you make a mistake
while entering a number, press CLEAR to clear
the highlighted part.
Network will automatically be connected to the
unit.
Advanced Setting
If you want to set the network settings manually, use
W/S to select [Advanced Setting] on the [Network
Setting] menu and press ENTER (b).
1. Use W/S to select [Wired] and press ENTER
(b).
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
Connecting
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
2.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
18 Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
Preparation
Before setting the wireless network, you need
to:
-- connect the broadband internet to the
wireless home network.
-- set the access point or wireless router.
-- note the SSID and security code of the
network.
2
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
Wireless
Communication
DLNA certified
servers
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Access Point or
Wireless Router
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection from
this player to your home network’s router or cable/
DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication. This
adjustment can be done from the [Settings] menu.
Adjust the [NETWORK] setting as follow. Setting up
the access point or the wireless router is required
before connecting the player to the network.
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3.Use W/S to select a desired SSID of wireless
network and press ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
,,Note
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
Connecting 19
Advanced Setting
If you want to set the network settings manually, use
W/S to select [Advanced Setting] on the [Network
Setting] menu and press ENTER (b).
1. Use W/S to select [Wireless] and press ENTER
(b).
,,Note
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
4. Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/A/
D and numerical buttons. If you make a mistake
while entering a number, press CLEAR to clear
the highlighted part.
5. Select [Next] and press ENTER (b) to apply
network settings.
[AP List] - Scans all available access points or
wireless routers within range and display them as
a list.
[Network name (SSID)] – Your access point may
not be broadcasting its network name (SSID).
Check your access point settings through your
computer and either set your access point to
broadcast SSID, or manually enter the network
name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(WiFi Protected Setup), select this option and note
the code number on the screen. And then, enter
the PIN number on a setting menu of your access
point to connect. Refer to the documentation for
your network device.
2. Follow the instructions of each connection
method on the screen.
Network connection status is displayed on the
screen.
6. Select [OK] and press ENTER (b) to complete
the network connection.
,,Note
To use PBC and PIN network connection,
security mode of your access point must be set
to OPEN or AES.
Connecting
yy An Access Point is a device that allows you to
connect to your home network wirelessly.
2
20 Connecting
Notes on network connection
yy Many network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the player to the home
network, quickly power off and/or disconnect the
power cable of the home network router or cable
modem. Then power on and/or connect the power
cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication errors/
malfunctions associated with your broadband
internet connection, or other connected
equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related material
available by the Internet Connection may not be
compatible with this player. If you have questions
about such content, please contact the producer
of the disc.
yy Some internet content may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your internet
service does not allow for such a connection, you
will not be able to connect the player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited to
the number of devices you can connect at the
same time. (If your ISP limits subscription to one
device, this player may not be allowed to connect
when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The wireless network operate at 2.4 GHz radio
frequencies that are also used by other household
devices such as cordless telephone, Bluetooth®
devices, microwave oven, and can be affected by
interference from them.
yy Turn off all unused network equipment in your
local home network. Some devices may generate
network traffic.
yy For the purpose of the better transmission, placing
the player from the access point as close as
possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
yy Move closer to the access point if possible or reorient the player so there is nothing between it
and the access point.
yy The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point, and
the location of the player.
yy Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
System Setting 21
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
5. Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/D to select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
7. Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
If wired network is connected, the network
connection setting will automatically be finished.
8. Displays private sound mode guide. Press ENTER
(b).
4. All available networks are displayed on the screen.
Use W/S to select [Wired Network] or desired
SSID of wireless network and press ENTER (b).
9. Displays the guide to enjoy online contents using
LG AV Remote. Press ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
3
System Setting
For details on network settings, refer to
“Connecting to your Home Network” on page
16.
22 System Setting
Settings
[NETWORK] menu
Adjust the setup settings
Connection Setting
You can change the settings of the player in the
[Settings] menu.
1. Press HOME (b).
The [NETWORK] settings are needed to use the
software update, BD-Live and online content services.
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See “Connecting to your Home
Network” on page 16.)
Connection Status
3
System Setting
2.Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection to
the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
content.
3.Use W/S to select the first setup option, and
press ENTER (b) to move to the second level.
[Partially permitted]
Internet access is permitted only for BD-Live
content which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live content without a
certificate.
[Prohibited]
4. Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
Internet access is prohibited for all BD-Live
content.
System Setting 23
Smart Service Setting
[Country Setting]
Select your area for displaying proper online
content service.
[Initialize]
Depending on the region, [Initialize] function may
not be available.
Device Name
You can make a network name using virtual keyboard.
This player will be recognised by the name you are
entering on your home network.
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
,,Note
yy This unit and the DLNA Certified Smartphone
must be connected to the same network.
yy While controlling the unit using the [Network
Play] function, the remote control may not
work.
yy Available file formats described on page 53
are not always supported on [Network Play]
function.
3
System Setting
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
(b) to display the home menu before
connecting to this unit.
24 System Setting
[DISPLAY] menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 13 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[720p]
[4:3 Letter Box]
3
[Auto]
System Setting
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the left
and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is set
to higher than 720p.
Outputs 576 lines of progressive video.
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
System Setting 25
HDMI Color Setting
[LANGUAGE] menu
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
Display Menu
[YCbCr]
Select when connecting to a HDMI display device.
[RGB]
Select when connecting to a DVI display device.
3D Mode
Select the type of output mode for Blu-ray 3D disc
playback. (This function is activated only when 3D TV
is connected.)
Blu-ray 3D disc playback will output as 3D mode.
[Off]
Blu-ray 3D disc playback will output as 2D mode
like a normal BD-ROM disc playback.
Home Menu Guide
This function allows you to display or delete the guide
bubble on the [HOME] menu. Set this option to [On]
for displaying guide.
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page 59.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
3
System Setting
[On]
Select a language for the [Settings] menu and onscreen display.
26 System Setting
[AUDIO] menu
Each disc has a variety of audio output options. Set the
player’s Audio options according to the type of audio
system you use.
,,Note
Since many factors affect the type of audio output,
see “Audio Output Specifications” on page 56 for
details.
Digital Output
3
System Setting
[Auto]
Select if you connect this unit’s DIGITAL AUDIO OUT
and HDMI OUT jack to a device with LPCM, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and
DTS-HD decoder.
[PCM]
Select if you connect this unit’s HDMI OUT jack to a
device with digital decoder or DIGITAL AUDIO OUT
jack to a device with two channel digital stereo
decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or DIGITAL
AUDIO OUT jack to a device with DTS decoder.
,,Note
yy When [Digital Output] option is set to [Auto], the
audio may output as bitstream. If the bitstream
information is not detected from HDMI device
with EDID, the audio may output as PCM.
yy If the [Digital Output] option is set to [DTS ReEncode], the DTS Re-Encode audio is outputted
for BD-ROM discs with secondary audio and the
original audio is outputted for the other discs (like
[Auto]).
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplifier is not
capable of handling 192 kHz and 96 kHz signal.
When this choice is made, this unit automatically
converts any 192 kHz and 96 kHz signals to 48 kHz
so your system can decode them.
[96 kHz]
Select this if your A/V Receiver or Amplifier is not
capable of handling 192 kHz signals. When this
choice is made, this unit
automatically converts any 192 kHz signals to 96
kHz so your system can decode them.
[192 kHz]
Select this if your A/V Receiver or Amplifier is capable
of handling 192 kHz signals.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a lower
volume without losing clarity of sound.
[Auto]
The dynamic range of the Dolby TrueHD audio output
is specified by itself.
And the dynamic range of the Dolby Digital and Dolby
Digital Plus are operated as same as the [On] mode.
[On]
Compress the dynamic range of the Dolby Digital,
Dolby Digital Plus or Dolby TrueHD audio output.
[Off]
Turns off this function.
,,Note
The DRC setting can be changed only when a disc is
not inserted or the unit is in complete stop mode.
System Setting 27
External Speaker
[LOCK] menu
If you are using LG smart Hi-Fi audio system MUSIC
flow, you can connect this unit to the multi-room
audio system to enjoy Hi-Fi sound wirelessly.
The [LOCK] settings affect only Blu-ray Disc and DVD
playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
Set the speaker’s output using A/D. However, if
several speakers are connected to this unit, use the
W/S to select the desired speaker.
yy If you select [Mute Blu-ray Disc™ Player] in
[External Speaker] menu, you can listen using
only MUSIC flow.
yy If you use this unit with MUSIC flow, at least one
unit should be connected by LAN cable. For more
detail for using with MUSIC flow, refer to the
MUSIC flow’s user manual.
yy It is recommended to connect up to 4 speakers
for smooth playback.
yy Install the speakers and the unit in place without
signal interference for smooth playback.
yy If your MUSIC flow is not displayed on the
external speaker list, reset network setting on
the setting menu.
[None]
Enter a 4-digit password twice, and press ENTER
(b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
3
System Setting
,,Note
You can create or change the password.
28 System Setting
DVD Rating
[OTHERS] menu
Blocks playback of rated DVD based on their content.
(Not all discs are rated.)
Quick Start
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
3
Set an age limit of BD-ROM play. Use number buttons
to input an age limit for BD-ROM viewing.
System Setting
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied only for
the Blu-ray disc that containing the Advanced
Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 58.
This player can stay in standby mode with low power
consumption, so that the player can instantly boot
without delay when you turn on this unit. Set this
option to [On] for activating [Quick Start] function.
,,Note
yy If [Quick Start] option is set to [On] and
an AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
yy When [Quick Start] is set to [On], power
consumption will be higher than when [Quick
Start] is set to [Off].
Auto Power Off
The screen saver appears when you leave the player
in Stop mode for about 5 minutes. If you set this
option to [On], the unit automatically turns off within
15 minutes since the Screen Saver is displayed. Set
this option to [Off] to leave the screen saver until the
unit is operated by the user.
How to disconnect the wireless network
connection or the wireless device.
Turn off the unit by using the power button.
System Setting 29
Initialize
Software
[Factory Set]
[Information]
You can reset the player to its original factory
settings.
Displays the current software version.
[Blu-ray Storage Clear]
LGE Open Source Software Notice is displayed.
Initializes the BD-Live content from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
[OSS Notice]
[Update]
You can update the software by connecting the
unit directly to the software update server (page
51).
Daylight Saving Time
[On]
Sets the time ahead one hour.
[Off]
Turns off this function.
Terms of Service
Privacy Policy for Blu-ray Disc™ Player is displayed.
To use the Premium Service and SW Updates, select
[Agree].
3
System Setting
When you use the BBC App, this function sets
the time ahead one hour for daylight saving time
(GMT+1).
30 Operating
Home Menu Display
Playing the Linked
Devices
Using [HOME] menu
The home menu appears when you press HOME
(b). Use W/S/A/D to select a category and
press ENTER (b).
Playing a disc
erot
1.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
2.Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3.Press HOME (b).
4. Select disc icon.
a [Movie] - Plays video content.
b [Photo] - Plays photo content.
4
c [Music] - Plays audio content.
Operating
d
[Premium] - Displays the Premium home
screen. (page 46)
e [Settings] - Adjusts the system settings.
,,Note
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
yy Depending on the BD-ROM titles, an USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD-VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Operating 31
Playing Blu-ray 3D disc
e
Playing a file on disc/USB device
yui
This player can play the Blu-ray 3D disc which
contains separate views for the left and right eyes.
This player can play video, audio and photo files
contained in the disc or USB device.
Preparation
1. Insert a data disc on the tray or connect an USB
device.
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
input(s).
ear 3D glasses to enjoy the 3D experience
yy W
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Connect an HDMI cable (Type A, High Speed
HDMI™ Cable) between the player’s HDMI
output and TV’s HDMI input.
2.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3.Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready TV
for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
File loading may take few minutes depending on the
number of content stored in the USB storage device.
Press ENTER (b) while [Cancel] is selected to stop
loading.
2.Press HOME (b).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select Disc or USB and press ENTER (b).
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy It is not recommended to watch a video in 3D
mode for infirm, child and pregnant woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing content in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
a Displays all linked devices.
b Displays video, photo or audio content.
c Displays the file or folder on linked device.
5. Select a file using W/S/A/D, and press d
(PLAY) or ENTER (b) to play the file.
4
Operating
1.Press HOME (b), and set the [3D Mode] option
on the [Settings] menu to [On] (page 25).
When you connect the USB device on the HOME
menu, the player plays an audio file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu for
the file type selection will appear.
32 Operating
Notes on USB device
yy This player supports USB flash drive/external HDD
formatted in FAT32 and NTFS when accessing
files (music, photo, movie). However, for BD-Live
and Audio CD recording, use the USB flash drive /
external HDD formatted in FAT32.
yy This unit can support up to 4 partitions of the USB
device.
Playing a file on Android device
yui
This player can play video, audio and photo files
contained in Android device.
1. Connect Android device to the unit with USB
cable. Make sure that MTP is activated on Android
device.
yy Do not extract the USB device during operation
(play, etc.).
yy An USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
yy USB device: USB device that supports USB1.1 and
USB2.0.
yy Video, audio and photo files can be played. For
details of operations on each, refer to relevant
pages.
4
yy Regular back up is recommended to prevent data
loss.
Operating
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select [MTP] using A/D and press ENTER (b).
yy Some USB device may not work with this unit.
yy Some digital cameras and mobile phones are not
supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
File loading may take few minutes depending on the
number of content stored in Android device.
5. Select a file using W/S/A/D, and press d
(PLAY) or ENTER (b) to play the file.
Operating 33
Notes on Connecting Android device
yy This unit can support only MTP (Media Transfer
Protocol) Android device.
5. Select a file using W/S/A/D, and press d
(PLAY) or ENTER (b) to play the file.
,,Note
yy Do not extract Android device during operation
(play, etc.).
yy The file requirements are described on page
53.
yy Video, audio and photo files can be played. For
details of playing each file type, refer to the
relevant pages.
yy The thumbnail of the unplayable files can be
displayed, but those cannot be played on this
player.
yy Regular back up is recommended to prevent data
loss.
yy The subtitle file name and video file name
have to be the same and located at the same
folder.
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, Android device may not be
recognized.
yy Some Android device may not work with this unit.
yy When you use MTP, playing some music, photo,
movie, or subtitle files may not work depending on
Android device.
This player can play video, audio and photo files
located in a DLNA server through your home
network.
1. Check the network connection and settings (page
16).
2.Press HOME (b).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select DLNA media server in the category using
A/D and press ENTER (b).
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA server, install the
SmartShare PC Software on your PC. (page
34)
4
Operating
Playing a file on a network
server
yui
yy The playback and operating quality may be
affected by your home network condition.
34 Operating
Using Home Network
Server for PC
DLNA stands for Digital Living Network Alliance,
which allows users to access video, photo and audio
files stored in server and enjoy them on TV via home
networking.
Before connecting to PC to play a file, SmartShare PC
Software (DLNA) should be installed on your PC.
About SmartShare PC Software
(DLNA)
SmartShare PC Software (DLNA) is for sharing video,
audio and photo files stored on your computer to this
unit as a DLNA-compatible digital media server.
4
Downloading SmartShare PC
Software (DLNA)
Operating
1. Start up your computer, visit http://www.lg.com.
If necessary, select your region.
2. Click support tab.
3. Fill your model name on the cover of owner’s
manual in search bar.
4. Find and download the “SmartShare PC Software
(DLNA)” file.
Installing SmartShare PC
Software (DLNA)
1. Before installation, close all running programs
including firewall and Anti-Virus programs.
2. Unzip and double-click “Setup.exe” to install
SmartShare PC Software (DLNA). The installation
is prepared and the installation wizard appears.
3. Follow the directions of the installation wizard
displayed on the screen.
4. Click the [Exit] button to complete the
installation.
,,Note
yy SmartShare PC Software is not supported
with Mac OS.
yy The SmartShare PC Software (DLNA) is a
customized software edition only for sharing
files and folders to this player.
yy This manual explains operations with the
English version of SmartShare PC Software
(DLNA) as examples. Follow the explanation
referring to the actual operations of your
language version.
Operating 35
Sharing files and folders
System requirements
On your computer, you must share the folder
containing video, audio and/or photo content to play
them on this player.
Minimum System
This part explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “SmartShare” icon.
2. Click [Movie], [Photo] or [Music] icon on the
center, and then click [Settings] on the top right
corner of the SmartShare PC Software. The
[Settings] menu appears on the screen.
3. Click [My Shared Contents] tab, and then click
icon. The [Add/Remove Shared Folders] menu
appears on the screen.
4. Click the folder containing the files you want to
share and then click the [OK]. The checked folder
is added to the [My Shared Contents] and then
click the [OK] at the bottom of the [Settings]
menu.
,,Note
yy If the shared folders or files are not displayed
on the player, click the [My Shared Contents]
on the [Settings] menu, and then click
icon.
yy For more information, click [HELP] on the
[Settings] menu.
yy Memory : 1 GB of free RAM
yy Graphics card : 64 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher), Windows
Vista®, Windows® 7 or higher
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
Recommended System
yy CPU : Intel® Core™ Duo or AMD Athlon™ 64X2,
1.7 GHz or better
yy Memory : 2 GB of free RAM
yy Graphics card : 128 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher), Windows
Vista®, Windows® 7 or higher
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
4
Operating
5. Make sure that the SmartShare (DLNA) service
turns on at the [Service] tab.
yy CPU : Intel® 2.0 GHz or AMD Sempron™ 2000+
processors
36 Operating
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press Z (STOP) during playback.
To pause playback
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) during video playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
4
To scan forward or backward
Operating
Press c or v to play fast forward or fast reverse
during playback.
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
(Video)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the next
chapter/track/file or to return to the beginning of the
current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have many
types of content in a folder together. In this case,
press C or V to go to the previous or next
content with same type.
Press d (PLAY) to start slide show.
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D to
go to the previous or next photo.
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after loading
a disc which contains a menu. If you want to display
the disc menu during playback, press DISC MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use
W/S/A/D buttons to navigate through menu
items.
Operating 37
Resume playback
eroyt
u
The unit records the point where you pressed the Z
(STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on the
disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of a disc
if you switch off the unit before commencing
to play it.
4
Operating
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
Last scene memory
er
38 Operating
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using A/D, and press ENTER
(b).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
Operating
a Progress bar - Displays the current position
and total playing time.
a Title – Current title number/total number of
titles.
b [Disc Menu] - Accesses menu on a disc.
b Chapter – Current chapter number/total
number of chapters.
c [Title/Popup] - Displays the DVD title menu or
BD-ROM’s pop-up menu, if available.
c Time – Elapsed playing time/total playback time.
d [Option] - Displays playback information.
d Audio – Selected audio language or channel.
e [Repeat] - Repeats a desired section or
sequence. (page 40)
e Subtitle – Selected subtitle.
f [3D] - Adjusts the 3D setting. (page 44)
g TV Aspect Ratio – Selected TV aspect ratio.
f Angle – Selected angle/total number of angles.
h Picture Mode – Selected picture mode.
Operating 39
,,Note
yy If no button is pressed for a few seconds, the
on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on discs
or titles.
Setting the slide show option
You can use various options during viewing a photo in
full screen.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on the
screen but prohibited to be changed.
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
While viewing pictures, press INFO/MENU (m).
a [Speed] - Use A/D to select a delaying speed
between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 44).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show.����������
(page 44)
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
4
Operating
b [Effect] - Use A/D to select a transition
effect between photos in a slide show.
40 Operating
Advanced Playback
Repeating a specific portion
eroty
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
During playback, press REPEAT (h) to select a
desired repeat mode.
A-B – Selected portion will be repeated continually.
1. During playback, press REPEAT (h).
2. Select [A-B] and press ENTER (b).
3.Press ENTER (b) at the beginning of the portion
you wish to repeat.
4. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
5. To return to normal playback, press CLEAR.
,,Note
Chapter – The current chapter will be played back
repeatedly. (BD / DVD only)
Title – The current title will be played back repeatedly.
yy You cannot select a portion less than 3
seconds.
All – All the titles or files will be played back
repeatedly. (Movie file only)
yy This function may not work on some disc or
title.
Off – Returns to normal playback.
4
To return to normal playback, press CLEAR.
Operating
Audio CDs/Audio files
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
All – All the tracks or files will be played back
repeatedly.
All – All the tracks or files will be played
back repeatedly in random order.
– The tracks or files will be played back in
random order.
To return to normal playback, press CLEAR.
,,Note
This function may not work on some disc or title.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b)
3. Select the [Time] option and then input the
required start time in hours, minutes, and seconds
from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
4. Press ENTER (b) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending on the
file type and ability of the DLNA server.
Operating 41
Selecting a subtitle language
eroy
Watching from a different angle
er
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
3.Use W/S to select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4. Use A/D to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Audio] option.
4. Use A/D to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this case,
press TITLE/POPUP or DISC MENU button
and choose the appropriate audio from the
selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
3.Use W/S to select the [Angle] option.
4. Use A/D to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [TV Aspect Ratio]
option.
4. Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
4
Operating
Hearing a different audio
eroy
2. Select an [Option] using A/D, and press ENTER
(b).
42 Operating
Changing subtitle Code Page
y
Changing the Picture Mode
eroy
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle file
properly.
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Code Page] option.
4. Use A/D to select desired code option.
1. During playback, press INFO/MENU (m).
3.Use W/S to select the [Picture Mode] option.
4. Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Picture Mode] option.
4. Use A/D to select the [User setting] option,
and press ENTER (b).
4
Operating
5. Press BACK (1) to exit the On-Screen display.
5. Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
6.Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
Operating 43
Viewing content information
y
Selecting a subtitle file
y
The player can display the content information.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m). The file information
appears on the screen.
During video playback, you can display the file
information by pressing TITLE/POPUP.
1.Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2.Press ENTER (b).
,,Note
The information displayed on the screen may not
correct comparing actual content information.
Changing content list view
yui
In the [Movie], [Photo] or [Music] menu, you can
change the content list view.
,,Note
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.
4
Operating
Press red (R) colored button repeatedly.
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
44 Operating
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
4. Use W/S to select a device, and press ENTER
(b).
Available device may differ depending on the
location of the current photo file.
4
Photo location
Available Device
Disc, USB
Disc, USB
Operating
MTP
MTP
DLNA server
DLNA server
5. Use W/S to select a file or a folder you wish to
play.
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6.Use D to select [OK], and press ENTER (b) to
complete music selection.
Playing file encoded in 3D
y
This function allows you to play 3D content in case of
file encoded in 3D.
1. During playback, press INFO/MENU (m).
2. Select [3D] using A/D, and press ENTER (b)
3. Select suitable mode (side by side, top and
bottom) which is same way as file encoded in 3D
by using W/S/A/D.
,,Note
If the subtitle is displayed abnormally, set the
TV’s 3D option to off and the unit’s 3D option to
on.
Operating 45
Advanced Features
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers by
connecting this unit to the internet.
1. Check the network connection and settings (page
16).
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
3.Press HOME (b), and set the [BD-LIVE
connection] option on the [Settings] menu (page
22).
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc
is still in the disc tray. Doing so may damage the
connected USB device and BD-Live features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC
and reuse it with this player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load and
start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive / external
HDD formatted in FAT32 only.
You can control this player with your iPhone or
Android phone via your home network. This player
and your phone must be connected to your wireless
network device such as access point. Visit “Apple
iTunes” or “Google Android Market (Google Play
Store)” for detailed information of “LG AV Remote”.
Private Sound Mode
By downloading “LG AV Remote” application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information, please
refer to “LG AV Remote” application.
,,Note
yy When you use the unit with MUSIC flow,
private sound mode is unavailable.
yy Not all modes support sound privacy and
pairing multiple devices is not available.
4
Operating
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option is
set to [Partially Permitted].
LG AV Remote
46 Operating
Using the Premium
Using Audio Cast
You can use various content services via Internet with
the Premium feature.
tu
eroy
1. Check the network connection and settings (page
16).
2.Press HOME (b).
3. Select the [Premium] using A/D, and press
ENTER (b).
Using LG smart Hi-Fi audio system MUSIC flow, you
can enjoy contents being played by this unit with high
quality wirelessly.
Preparation
In order to use the Audio Cast, you need to:
yy You should have a speaker(s) that supports
Audio Cast.
4. Select an online service using W/S/A/D, and
press ENTER (b).
4
,,Note
yy This player and your Music Flow speaker
must be connected to your wireless network
device such as access point.
Operating
yy For detailed information of each service,
contact to the content provider or visit
support link of the service.
1. Before using this feature, check if MUSIC
flow speakers are set as external speakers on
[External Speaker] menu. (page 26)
yy The content of Premium services and service
related information, including user interface,
is subject to changes. Please refer to the
web site of each service for most up-to-date
information.
2. Press green (G) colored button for more than 3
seconds. MUSIC flow speakers output the sound
of the contents being played.
yy Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
yy For the first time to access [Premium],
current country setting appears.
yy If you want to change the country setting, go
to [Settings] > [NETWORK] > [Smart Service
Setting] > [Country Setting]. Select [Manual]
and press ENTER (b) on [Country Setting]
menu.
,,Note
yy It is recommended to connect up to 4
speakers for smooth playback.
yy If you select [Mute Blu-ray Disc™ Player] in
[External Speaker] menu, you can listen using
only MUSIC flow.
yy If playback doesn’t work smoothly, the
connection may be broken automatically.
yy When you perform private sound mode, this
function is unavailable.
yy If Music flow speakers are turned off or
disconnected from the network connection
while using Audio cast, you should set
external speakers output on [External
Speaker] menu again.
Troubleshooting 47
Troubleshooting
General
Symptom
Cause & Solution
The unit does not work properly.
yy Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting
again.
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
yy Be sure that the AC adaptor is connected to the unit securely.
The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Place the disc with the playback side down.
yy Place the disc on the disc tray correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
yy An USB device which requires additional program installation when you
have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play video, photo or
audio files.
yy The files are not recorded in a format that the unit can play.
yy The unit does not support the codec of the video file.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
yy If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
48 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect the
USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (page 16).
yy Your broadband speed may not fast enough to use the BD-Live features.
Contact your Internet Service Provider (ISP) and increase the broadband
speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream video
services. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
Media servers are not displayed
on the device list.
yy The firewall or anti-virus software on your media server is running. Turn
off the firewall or anti-virus software running on your media server.
yy The player is not connected to the local area network that your media
server is connected.
5
Troubleshooting
Cannot connect the player to
the access point or wireless LAN
router.
yy The wireless communication may be interrupted from household devices
that are using radio frequencies. Move the player away from them.
Access point is not displayed on
the “Access point name” list.
yy The access point or wireless LAN router may not broadcast its SSID. Set
your access point to broadcast its SSID through your computer.
yy Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Troubleshooting 49
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture from
the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does not
support copyright protection.
Picture noise appears.
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
Customer support
5
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
Troubleshooting
Open source software notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on which you purchased the product.
50 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
Code number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
By pressing
You can
Samsung
6, 7
1 (TV POWER)
Turn the TV on or off.
Sony
8, 9
INPUT
Switch the TV’s input source
between the TV and other
input sources.
Hitachi
4
VOL +/–
Adjust the volume of the TV.
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
Setting up the remote to control
your TV
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
Appendix
Appendix 51
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be made
available to units that are connected to a broadband
home network. If there is new software available and
the unit is connected to a broadband home network,
the player will inform you about the update as
follows.
Option 1:
1. The update menu will appear on the screen when
you turn on the player.
2.Use A/D to select a desired option and then
press ENTER (b).
Software update
You can update the player using the latest software
to enhance the products operation and/or add new
features. You can update the software by connecting
the unit directly to the software update server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings (page
16).
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
Starts the software update.
[Cancel]
Exits the update menu and the
home appears.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home menu.
Press blue (B) colored button to start the update
procedure.
6
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
Appendix
[OK]
52 Appendix
4. If newer version exists, the message “A new
update was found. The update takes a few
minutes. Do you want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest update
from the server. (Downloading will takes several
minutes depending on your home network
condition)
7. To update software the next time, the software
update procedure has to be started from the
beginning again.
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
8. When update is completed, the power will be
turned off automatically in a few seconds.
9. Turn the power back on. The system now
operates with the new version.
,,Note
6
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page 49.
Appendix 53
Additional Information
File requirement
Video files
File
Location
File
Extension
Codec Format
Audio
Format
Disc,
USB
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS,
H.264/MPEG-4
AVC, MPEG2 PS,
MPEG2 TS, VC-1
SM (WMV3)
Dolby
Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub),
SubViewer 1.0 (.sub), SubViewer
2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
DLNA
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.3gp”, “.mov”,
“.mpe”, “.m1v”, “.m2v”,
”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS,
H.264/MPEG-4
AVC, MPEG2 PS,
MPEG2 TS, VC-1
SM (WMV3)
Dolby
Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle System
(.txt)
Subtitle
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
Note
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 320 kbps (MP3)
Some wav files are
not supported on this
player.
DLNA
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 320 kbps (MP3)
Some wav files are
not supported on this
player.
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”,
“.mpo”, “.jps”
Recommended
Size
Less than 4,000 x 3,000 x 24 bit/
pixel
Less than 3,000 x 3,000 x 32 bit/
pixel
Note
Progressive and lossless
compression photo image files are
not supported.
6
Appendix
Disc,
USB
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”,
“.aiff”
54 Appendix
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This player
can not support the pure Unicode subtitle
files.
yy File compatibility may differ depending on the
server.
yy Depending on the types of file or ways of
recording, it may not play back.
yy Because the compatibility on DLNA server are
tested on the DLNA server (SmartShare PC
Software) environment, file requirements and
playback functions may differ depending on
media servers.
yy A disc which was recorded by multi-session
on normal PC is not supported on this player.
yy The file requirements on page 53 are not
always compatible. There may have some
restrictions by file features and media server’s
ability.
yy Playing video subtitle files are only available
on DLNA media server created by SmartShare
PC Software downloaded from website.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
6
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
Appendix
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yy To be playback a video file, video file name
and Subtitle file name must be the same.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
yy Video / Audio codec compatibility may differ
depending on video file.
AVCHD (Advanced Video Codec
High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital video
camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than that
of the conventional image compressing format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Appendix 55
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized Customer
Service Center.
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
The DLNA certification logo makes it easy to find
products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA
Interoperability Guidelines v1.5.
When a PC running DLNA server software or other
DLNA compatible device is connected to this player,
some setting changes of software or other devices
may be required. Please refer to the operating
instructions for the software or device for more
information.
Certain system requirements
For high definition video playback:
yy High definition display that has HDMI input jack.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
yy Viewing high-definition content and up-converting
standard DVD content may require a HDMIcapable input or HDCP-capable DVI input on your
display device.
yy Some BD-ROM and DVD discs may restrict the use
of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you use
HDMI connection for the audio output of the unit.
yy You can use an USB device to store some disc
related information, including downloaded online
content. The disc you are using will control how
long this information is retained.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
6
yy An amplifier/receiver with a built-in (Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD)
decoder.
Appendix
yy Main, center, surround speakers and subwoofer as
necessary for chosen format.
56 Appendix
Audio Output Specifications
Jack/Setting Source
COAXIAL (DIGITAL AUDIO OUT)
PCM
DTS Re-encode *3
Auto
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby Digital
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
DTS 2ch
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
DTS
PCM 2ch
Jack/Setting
Source
6
HDMI OUT
PCM
DTS Re-encode *3
Auto *1 *2
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby TrueHD
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
DTS 2ch
Linear PCM 2 ch
Linear PCM 5.1ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
Appendix
*1The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Auto]. (Except LPCM
Codec : the output always include interactive and
secondary audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability of
the connected HDMI device even though [Digital
Output] option is set to [Auto].
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
yy If the HDMI OUT jack is connected to your TV
with High Speed HDMI™ Cable and Dolby Digital
Plus/Dolby TrueHD is outputted from HDMI OUT
jack, DIGITAL AUDIO OUT jack is limited to “PCM
2ch” (When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
Appendix 57
yy The audio is outputted up to PCM 48 kHz/16 bit
for MP3/WMA file and PCM 44.1kHz/16 bit for
Audio CD during playback.
yy You must select a digital audio output and a
maximum sampling frequency that your Amplifier
(or AV receiver) accepts using [Digital Output] and
[Sampling Freq.] options on the [Settings] menu
(page 26).
yy With digital audio connection (DIGITAL AUDIO
OUT or HDMI OUT), Disc Menu button sounds of
BD-ROM may not be heard if the [Digital Output]
option is set to [Auto].
yy If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound
at all.
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
6
Appendix
58 Appendix
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
6
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania Denmark DK Libya Ecuador EC Luxembourg LY Russian
LU Federation Appendix
Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
RO Uzbekistan Vietnam RU Zimbabwe SA
SN
TH
UZ
VN
ZW
Appendix 59
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
6
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
Appendix
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
60 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
Java is a trademark of Oracle and/or its affiliates.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
6
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
“x.v.Color” is a trademark of Sony Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Appendix 61
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or
copying will be interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request
additional information about Cinavia by mail, send
a postcard with your mailing address to: Cinavia
Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
6
Appendix
62 Appendix
Specifications
General
AC adapter
yy
yy
yy
yy
Model : WA-12M12FK
Manufacturer: Asian Power Devices Inc.
Input: 100-240 V~, 50-60 Hz 0.5 A Max.
Output: 12 V 0 1 A
Networked standby
power consumption
2.5 W (If all network ports are activated.)
Dimensions (W x H x D)
Approx. 270 mm x 43 mm x 195 mm
Net Weight (Approx.)
0.87 kg
Operating temperature
5 °C - 35 °C
Operating humidity
5 % - 90 %
Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
DIGITAL AUDIO OUT (COAXIAL)
0.5 V (p-p), 75 Ω, RCA jack x 1
System
6
Laser
Semiconductor laser
wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Wireless LAN (internal antenna)
IEEE 802.11b/g/n (2.4 GHz band)
Bus Power Supply (USB)
5 V 0 500 mA
Appendix
yy Design and specifications are subject to change without notice.
Appendix 63
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Maintaining the unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
6
Appendix
64 Appendix
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs, graphics,
videos, webcasts, publications, tools, resources,
software, code, programs, applets, widgets,
applications, products and other content (“Content”)
and all services and offerings (“Services”) provided or
made available by or through any third party (each
a “Service Provider”) is the sole responsibility of the
Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to the
suspension, removal or cessation of all or any part of
the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-date
information. LGE is neither responsible nor liable for
customer service related to the Content and Services.
Any question or request for service relating to the
Content or Services should be made directly to the
respective Content and Service Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service Provider
or any changes to, removal of, or cessation of
such Content or Services and does not warrant or
guaranty the availability of or access to such Content
or Services.
Download PDF