LG | DNX190UH | LG DNX190UH Owner’s Manual

DN190/191E3H_N/HA4ULL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DNX190UH/DNX190MH
USB
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
CAUTION: The
CAUTION
(dripping
as
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
vases,
CAUTION
CAUTION: TO REDUCE THE RISK
Most devices
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
dedicated
(OR BACK)
That
NO USER-SERVICEABLE PARTS INSIDE
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
shock to persons.
within
an
is intended to alert the
equilateral
user
the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
openings
and to
ensure
it from
over
in the cabinet
reliable
operation
outlet circuit which powers only that
no additional outlets or branch
page of this owner's manual
specification
Do not overload wall outlets. Overloaded wall
for ventilation
are
of the
provided
product and
to
protect
heating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord
exits the appliance.
such
as
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
accessible.
POWER: This unit
operates
on a
mains
WIRING: This unit is
amp mains
always
Never
supplied
with
a
BSI 1363
use a
this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of
plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type
fitted. Please refer to the wiring instructions below:
letter E
player
plug removed from the mains lead of
destroyed. A mains plug with bared
must be
with the earth
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
plug,
a
mains socket.
Should the unit
require maintenance,
contact
an
authorized
service center.
Use of
symbol
fitted,
use
a
pin,
or
5 amp
controls, adjustments
other than those
or the performance of
specified herein may result
hazardous radiation exposure.
To prevent direct exposure to laser
-
BLUE:
marked with the
coloured green
or
fuse, either in the
at the distribution board.
IMPORTANT: The wires in this mains lead
System.
product, please
read this
proper use of this
manual carefully and retain it for future reference.
procedures
or
accordance with the
Laser
ensure
owner 's
following
are
coloured in
codes:
NEUTRAL, BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD
correspond
with
the
coloured
player may not
marking identifying
the
terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
in
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
or
green and yellow.
If any other plug is
a
13
approved
use
Do not connect either wire to the earth
product employs
200-240V,
fused at 5 amp. When replacing the fuse
5 amp BS 1362, BSI or ASTA approved type.
wires is hazardous if inserted in
CAUTION:
of
plug,
WARNING: A mains
To
supply
50/60Hz.
this DVD
This
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
or
easily
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and
on a
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
placed
to be certain.
This
point
single
a
recommended be
circuit;
circuits. Check the
PERSONNEL.
triangle
is,
are
the Power Cord
electronic device and has
REFER SERVICING TO QUALIFIED SERVICE
The exclamation
concerning
marked with the letter N
or
coloured black. The wire which
is coloured brown must be connected to the terminal which
is marked with the letter L
or
coloured red.
This
product
is manufactured to
with the radio interference
of EEC DIRECTIVE
comply
requirements
89/336/EEC, 93/68/EEC
and 73/23/EEC.
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
symbol
product it means the product
by the European Directive
is attached to
is covered
a
2002/96/EC.
2. All electrical and electronic
products should
separately from the municipal
waste stream via designated collection
facilities appointed by the government or the
be
disposed
of
local authorities.
3. The correct
will
disposal of your old appliance
help prevent potential negative
consequences for the environment and
human health.
4. For
detailed information about
disposal
appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
more
of your old
3
Contents
Introduction..................5-8
Operations.................16-23
AbouttheSymbolDisplay.............5
GeneralFeatures......................16
SymbolusedinthisManual..............5
AdditionalFeatures....................17
NotesonDiscs........................5
DVDAudioDiscs......................18
HandlingDiscs.......................5
StoringDiscs........................5
CleaningDiscs.......................5
TypesofPlayableDiscs.................6
RegionalCode.........................6
MovingtoanotherGROUP.............18
ViewinganotherPAGE................18
PlayinganMemoryCard................19
PlayinganUSB.......................19
.20
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback.................20
.20
RepeatProgrammedTracks.
.20
Erasing a Track from Program List
the
List
.20
Erasing
Complete Program
ViewingaJPEGfile....................21
FrontPanel...........................7
RemoteControl........................8
RemoteControlOperation..............8
Remote Control Battery Installation
.8
.
InstallationandSetup.
.
.
.
.
.
.
.
.
.
.
.
.
.9-15
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow.........................21
StillPicture.........................21
SettingupthePlayer....................9
DVDPlayerConnections.................9
Video and Audio Connections to Your TV
.
.
.9
Resolutionsetting.....................9
HDMIconnection....................10
Audio Connection to Optional Equipment
.11
.
.12
Displaying Disc Information on-screen
InitialSettings........................12
GeneralOperation...................12
.
.
.
MovingtoanotherFile................21
Zoom.............................21
Torotatepicture.....................21
To listen to MP3 music while watching
picture............................21
PlayingaDivXMoviefile................22
Controlling other TVs with the
remotecontrol...........................23
MaintenanceandService...............23
LANGUAGE........................13
?MenuLanguage...................13
?DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
DISPLAY..........................13
LanguageCodes.......................24
?TVAspect........................13
?DisplayMode.....................13
?TVOutputSelect..................13
AreaCodes...........................24
AUDIO............................14
?DolbyDigital/DTS/MPEG
?SampleFreq.(Frequency).
DynamicRangeControl(DRC).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.14
.14
.14
?Vocal...........................14
LOCK(ParentalControl)..............14
?Rating...........................14
?Password........................14
?AreaCode.......................15
OTHERS..........................15
?PBC............................15
?AutoPlay........................15
B.L.E. (Black Level Expansion)
.15
?DivX(R)VOD.....................15
?
.
4
Reference..................24-25
.13
.
.
.
.
.
.
Troubleshooting........................25
Specifications.........................25
Introduction
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
Notes
on
Handling
Discs
Discs
reference.
This manual
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the
"
"
may appear on your TV display during
and indicates that the function explained in
this owner's manual is not available
on
that
specific
DVD video disc.
special
notes and
operating
features.
Tip:
Indicates
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
Introducin
the disc.
Storing Discs
playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
After
Used in this Manual
Note:
Indicates
the
disc
Symbol Display
operation
Symbol
Do not touch the
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
tips
and hints for
A section whose title has
is
applicable only
symbol.
making
of the
following symbols
represented by the
one
to the disc
the task easier.
ALL
All discs and file listed below
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
DivX
DivX files
M/C
Memory
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Card
5
Types of Playable
Regional Code
Discs
This unit has
DVD
unit. This unit
(8cm/12cmdisc)
as
DVD audio discs
the
Notes
(8cm/12cmdisc)
?
rear
on
of the unit
Regional
"ALL".
Codes
Most DVD discs have
a
globe
with
Audio CD
number must match your unit's
disc cannot play.
?
addition, this unit plays DVD±R/RW and CD-R/RW
Memory Card, USB that contains audio titles, DivX,
MP3, WMA, and/or JPEG files.
clearly
visible
on
the
one or more
cover.
regional
This
code
or
the
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
In
Notes
on
Code" appears
on
the TV
screen.
Copyrights:
It is forbidden
broadcast via
by law to copy, broadcast, show,
cable, play in public, or rent copyrighted
material without
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
Do not
use
shaped
or
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
?
or
numbers in it
(8cm/12cmdisc)
?
regional code printed on the rear of the
play only DVD discs labelled same
can
Video CD
(VCD/SVCD)
(8cm/12cmdisc)
?
a
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
permission. This product features the
copy protection
developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
function
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Customers should note that
COMPATIBLE WITH THIS PRODUCT AND MAY
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
owner.
always
be
sought
from the
copyright
DEFINITION TELEVISION SETS ARE FULLY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL
DVD
525p AND 625p
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
6
Front Panel
abc
i
hm
abc
defg
jl
i
hj
a
h
POWER
Switches the unit ON and OFF.
b
i
can
change
the resolution
depending
on
your TV.
c
d
menu
for memory card
or
USB.
k
(PLAY)
Starts playback.
(STOP)
Stops playback.
f
SKIP
l
window
m
(.)
Returns to beginning of current chapter
go to previous chapter or track.
(>)
chapter
MEMORY CARD Slot
a
memory card.
Remote Sensor
Point the remote control here.
x
Go to next
Z (OPEN / CLOSE)
Opens or closes the disc tray.
Insert
N
SKIP
disc here.
Shows the current status of the unit.
e
g
a
j Display
MEMORY
Accesses the
k l
Tray
Insert
RES.
You
Disc
defg
or
USB
Insert
or
track
a
USB.
or
track.
7
Remote Control
SCAN(m/M)
Search backward
POWER
Switches DVD
Player
and closes the disc
(Z)
tray.
track.
0-9 numerical buttons
Selects numbered items in
a menu.
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
CLEAR
Removes
a
track number
List
Program
or a
mark
Marker Search
on
the
on
the
menu.
PLAY
TV Control Buttons
POWER: Turns the TV
on or
AV: Selects the TV's
Starts
off.
Adjusts
(N)
playback.
STOP
(x)
Stops playback.
source.
PR/CH +/--: Selects TV's channel.
VOL +/--:
forward.
SKIP(./>)
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
ON and OFF.
OPEN/CLOSE
Opens
or
TV's volume.
AUDIO
Selects
audio
an
language
or an
audio channel.
SUBTITLE
Selects
a
subtitle
a
DVD
language.
ANGLE
Selects
camera
if
angle,
available.
SETUP
Accesses
DVD MENU
Accesses
menu on a
DVD disc.
Marks any
title menu, if available.
b / B / v /V
Selects
item in the
Displays
menu.
MARKER SEARCH
menu.
Enter to program edit mode.
Display.
RETURN
Displays
point during playback.
PROGRAM
DISPLAY
Accesses On-Screen
Setup
SEARCH
(left/right/up/down)
an
the
MARKER
TITLE
Displays
or removes
menu.
ZOOM
(O)
Enlarges
the video CD with PBC.
video
image.
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat sequence
point B.
from
point A
to
RANDOM
Plays
tracks in random order.
RESOLUTION
You
can change the resolution
depending on your TV.
Remote Control
Remote Control
Operation
Point the remote control at the remote
sensor
and
press the buttons.
AAA AAA
Do not mix old and
different
etc.
8
new
batteries and
types of batteries such
as
never
mix
standard, alkaline,
the
rear
of the
control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
remote
Caution:
Battery installation
battery cover on
Detach the
Installation and
up the
Setting
The
Do not connect the DVD
Player
and sound of
picture
Setup
a
the
nearby TV, VCR,
or
radio
turn off the unit after
DVD
removing
Video
Connect the COMPONENT
--
(576p/720p) jacks on the DVD
Player to the corresponding in jacks on the TV
using an Y Pb Pr cable (C).
the disc.
Progressive
Player Connections
Scan
If your television is
?
a
high-definition
"digital
or
ready" television, you may take advantage of
the unit's progressive scan output for the
Depending
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
highest
necessary for additional connection
as
Player's AUDIO OUT jack to
jack (record deck) of your audio system.
VIDEO OUT/
on
devices
in
Component
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or
phone
possible.
Progressive scan does not
analog video connections
(yellow VIDEO OUT jack).
?
The
information.
SCART INPUT
video resolution
?
work with the
720p and 576p(480p) resolutions
progressive scan applied resolution.
Resolution
InstaliodSeup
the
are
setting
1. Before you set the resolution, this unit must be in
stop mode. Press STOP to stop playback.
T
2. Press RESOLUTION
setting
The current resolution
once.
will be appears in the
3. Press RESOLUTION
display
to
repeatedly
window.
change
the
resolution you want.
The available resolution
are as
according
Available Resolution
OUTPUT
CONNECTION
VIDEO OUT
to
menu
(576p/720p) jack
page 13.)
Output
Select
option
on
the
or
SCART's RGB
signal. (Refer
Make
sure
player
is connected
directly
to the
?
VCR, otherwise the DVD image could
be distorted by the copy protection system.
a
SCART connection
--
Connect the TO TV scart
jack on the DVD player to the corresponding
jacks on the TV using the scart cable (T).
Video
DVD
Connect the VIDEO OUT
player
to the video in
the video cable
Audio
--
on
jack
the TV
720p
576p
1280
x
720p
480p
x
x
720p
576p
x
576i
VIDEO OUT
720
x
576i
SCART
720
x
576i
720
x
1920
x
1080i
1280
x
720p
480p
720
x
720
x
480i
720
x
480i
720
x
480i
For Video and SCART
connections, resolution
be set to
576p(480p) by pressing
576i(480i)
RESOLUTION
jack
on
on
the TV
using
Player
(A) using
the audio cables.
or
must
button, however Video OUT and
always
at
576i(480i)
standard resolution.
If your TV does not accept your resolution
abnormal picture appears on the screen.
setting,
Please read TV's owner's manual then set the
resolution that your TV
the
right AUDIO OUT jacks
right IN jacks
to the audio left and
?
in
(V)
Connect the left and
of the DVD
1080i
x
720
SCART is
--
x
1280
Notes:
the DVD
TV and not to
1920
x
Video and Audio Connections
to Your TV
1080i
720
VIDEO OUT
to
x
1280
COMPONENT
COMPONENT VIDEO OUT/
use
1920
720
Caution:
setup
NTSC
PAL
HDMI
You must set the TV
to the connections
shown below.
?
For
720p
can
accept.
and 1080i resolution
on
the
component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed
at the
576p(480p)
resolution without
HDMI cable connection. With HDMI cable
connection, the picture may
not be
displayed
properly.
9
HDMI connection
HDMI
If you have a HDMI TV or monitor, you
to this player using a HDMI cable.
Set the TV's
1.
Owner's
to HDMI
source
(refer
connect it
can
HDMI
TV
to TV's
manual).
Connect the HDMI OUT
2.
compatible
HDMI
jack on
(H).
a
jack on the unit
compatible TV or
HDMI
H
to the
monitor
Press RESOLUTION
3.
repeatedly
to select the
desired resolution.
Notes :
?
Both PCM and Bitstream Audio out is
when the
sample frequency
available,
is set to 48kHz in HDMI
connection.
?
setup is set to bitstream and your TV does
not support Bitstream Audio out in HDMI
not
output
HDMI
or
?
use
sound
no
DTS
or
noisy
output with
are
Definition Multimedia
with DVD
menu
HDMI
HDCP
option [Dolby
in the SETUP
MPEG]
or
sound
set the Audio
to PCM
Interface) supports
single digital connection for
Players, Set-Top Boxes, and other AV
on a
HDCP
developed to provide the technologies of
(High-bandwidth Digital Content Protection).
is used to protect digital content transmitted
was
and received.
Off.
The
(High
devices.
connection,
Digital,
HDMI
both video and audio
or
distorted.
When the
player
About HDMI
If Audio
connection, audio sound may
?
Rear of DVD
arrow on
up for correct
the cable connector
alignment
body
should face
with the connector
on
the
HDMI has the
enhanced,
player.
or
capability to support standard,
high-definition video plus standard
to
multi-channel surround-sound
audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and
between the AV
connectors),
source
and communication
and AV devices such
as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface
?
If there is noise
or
lines
on
the screen,
HDMI
please
check the HDMI cable.
?
Not all
HDCP-compatible
DVI devices will work with
this unit.
?
?
If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
If
an
abnormal
picture
appears
on
the TV screen,
turn off the unit and then turn the unit
on
again.
Tips:
?
When you use HDMI connection,you can change
the resolution (576i(480i), 576p(480p), 720p, 1080i)
for the HDMI
?
output.
The HDMI will out at
576p(480p) resolution, even
576i(480i) on the HDMI
you set the resolution to
connection.
10
if
are
trademarks
licensing
LLC.
or
registered
trademarks of
Audio Connection to
Optional
Equipment
Connect the DVD
for audio
player
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (OPTICAL O or COAXIAL X) audio
player
cable.
Digital Multi-channel
digital multi-channel
sound quality. For this
A
/ video receiver that
O
X
A
sound
connection
provides
you need
multi-channel audio
supports
a
one or more
the best
of the
audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
Notes:
?
OPTICAL
DIGITAL INPUT
If the audio format of the
the
COAXIAL
DIGITAL INPUT
a
AUDIO INPUT
Amplifier (Receiver)
?
strong,
digital output
does not match
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
produces
Six Channel
Digital Surround Sound via a digital
only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
connection
can
is
Manufactured under license from
Laboratories.
the double-D
Dolby
Laboratories.
DTS and DTS
of
Dolby
"Dolby", "Pro Logic", and
symbol are trademarks of
Digital
Digital Out are trademarks
Systems, Inc.
Theater
11
Displaying
Disc Information
Initial
on-screen
You
loaded
1.
display
can
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
type
displayed differ depending
playing status.
or
on
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 13 to 15.
To
display
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
A second press of
screen.
To go to the next level:
Press B on the remote control.
1/3
To go back to the previous level:
Press b on the remote control.
1/12
0:20:09
General
1 ENG
ABC
Settings
Operation
1.
Press SETUP. The
2.
Use v / V to select the desired
Setup
menu
appears.
1/1
3D SUR.
2.
You
select
can
change
Title
an
item
select the
or
(Track)
--
by pressing v / V and
setting by pressing b / B.
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
B to
--
Angle
Sound
--
--
--
alternate
Selected subtitle.
Selected
angle/total
number of
angles.
Selected sound mode.
no
button is
screen
12
for
pressed
display disappears.
a
few
seconds, the
setting for
setting(s).
the selected
move
item,
as
well
option
as
then
to the third level.
4.
Use v / V to select the desired
5.
Press SETUP
on-
then press
shows
screen
Use v / V to select the second desired
press B to
Note:
If
3.
option
to the second level. The
the current
--
Subtitle
move
setting then press
ENTER to confirm your selection. Some items
require additional steps.
or
PLAY to exit the
Setup
menu.
LANGUAGE
DISPLAY
Menu
TV
Language
Select
a
language
for the
Setup
menu
and
on-screen
Aspect
4:3
display.
Select when
--
16:9
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
the disc
Other
--
Refers to the
was
track
original language
Display
in which
Mode
setting
works
only
when the TV
InstaliodSeup
Aspect
mode is set to "4:3".
recorded.
Letterbox
--
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
language, press number
corresponding 4number
to
the
digit
according
language code list
on page 24. If you enter the wrong language code,
--
Mode
Display
To select another
buttons then ENTER to enter the
Panscan
on
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
do not fit.
press CLEAR.
Off
(for
Disc
Subtitle)
--
Turn off Subtitle.
TV
Select
Output
Set the
player's
TV
the TV connection
YPbPr
Output
Select
options according
type.
When your TV is connected with the
COMPONENT VIDEO OUT/ (576p/720p) jacks
--
the DVD
RGB
to
--
SCART
on
player.
When your TV is connected with the
(RGB signal) jack.
13
AUDIO
LOCK
Each DVD disc has
Set the
player's
of audio
a
(Parental Control)
variety of audio output options.
options according to the type
AUDIO
system you
use.
Rating
Blocks
Dolby Digital
Bitstream
/ DTS / MPEG
--
Select "Bitstream" if you connect this
jack to an amplifier or other
are
1. Select
the LOCK
unit's DIGITAL OUT
equipment
with
a
DTS
Dolby Digital,
or
MPEG
PCM
a
--
not
then
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
downmixed to two-channel PCM
audio.
Off
menu
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
two-channel
DVDs encoded in
automatically
/
on
their
press B.
MPEG) Select when
digital stereo amplifier.
Dolby Digital or MPEG will be
(for Dolby Digital
"Rating"
on
rated.
2. To
decoder.
connected to
of rated DVDs based
playback
content. Not all discs
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
3. Select
a
Rating
rating
from 1 to 8
using
the v / V buttons.
Rating one (1) has the most
rating eight (8) is the least
1-8:
restrictions and
Sample Freq. (Frequency)
restrictive.
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is
96 kHz
made, this unit automatically converts any
signals to 48 kHz so your system can decode
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
them.
If your receiver or amplifier is
kHz signals, select 96 kHz.
capable
With the DVD
Control
format, you
handling
96
amplifier
to
verify
can
enter
hear
step
To
a
(the
quietest ones). This allows you to listen to a movie at
a lower volume without losing clarity of sound. Set
change password.
2
as
on
the LOCK
shown above
3. Press SETUP to exit the
If you
Vocal
1.
Press SETUP to
2.
Input
only
when
a
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
on
the disc mix into
(Rating).
menu.
forget your password
If you
DRC to On for this effect.
playing.
then press B.
the
forget your password,
following steps:
Set to On
menu
change
password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
program's
presentation possible. However, you may wish to
compress the dynamic range of the audio output
difference between the loudest sounds and the
or
1. Select Password
soundtrack in the most accurate and realistic
14
can
2. Follow
(DRC)
selection, then
Password
You
Check the documentation for your
its capabilities.
Dynamic Range
of
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
the
display
you
the
can
clear it
Setup
menu.
6-digit number "210499" and
password is cleared.
ENTER. The
using
press
the
Area Code
DivX(R)
Enter the code of the
We
whose standards
area
used to rate the DVD video
disc, based
on
were
the list
on
page 24.
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
information, visit www.divx.com/vod.
Select "Area Code"
1.
VOD
the LOCK
on
menu
then
press B.
2.
Follow
3.
Select the first character
4.
Press B and select the second character
2
step
as
shown
previous
using
page
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R)
VOD"
option
then press B.
registration code will appear.
Use the registration code to purchase
(Rating).
v / V buttons.
videos from DivX
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
using
download the video onto
v / V buttons.
Press ENTER to confirm your Area code selection.
5.
a
disc for
playback
on
this unit.
3.
Press ENTER to exit.
Note:
OTHERS
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
InstaliodSeup
this unit.
PBC
Set
Playback
Control
(PBC)
to On
On: Video CDs with PBC
or
Off.
are
played according
are
played
to
the PBC.
Off: Video CDs with PBC
way
Auto
You
as
the
same
Audio CDs.
Play
set up the unit so a DVD disc automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search for
title that has the longest playback time and then play
back the title automatically.
can
starts
Note:
The Auto
B.L.E.
Play
(Black
function may not work for
Level
some
Expansion)
To select the black level of
preference
On:
and monitor's
Expanded
DVDs.
playback pictures.
ability.
grey scale.
Off: Standard grey scale.
(0
(7.5
IRE cut
Set your
off)
IRE cut
off)
Note:
The B.L.E. function works NTSC
system only.
15
Operations
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
/
>)
tray.
press X to pause
During playback,
Press X
SKIP
Discs
Operations
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m
required scan speed.
or
M) repeatedly
to
select the
DVD, DivX disc; 4 steps
CD, MP3, Audio CD
Video
While the
; 3
steps
playback paused, press SCAN M
repeatedly to play in slow motion (4 steps, forward only).
REPEAT
is
press REPEAT
mode.
During playback,
desired
repeat
DVD Video discs:
Video
A-B
repeatedly
to select
a
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or
random playback.
in
stop mode, press RANDOM for
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(ANGLE)
(SUBTITLE)
The disc
menu
appears
During playback
different
camera
select
desired
a
on
the
screen.
of DVD disc contains
angles,
angle.
press ANGLE
scenes
recorded
repeatedly
During playback, press SUBTITLE repeatedly
language.
to
to select
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
different audio
16
to hear
a
a
Notes
On
?
on
a
Video CD with
the
"PBC"
?
general features:
on
setup
on
menu
page
PBC,
to
use
Marker Search
you must set PBC to Off
the
repeat function (See
15).
If you press SKIP
(>)
the
once
during Repeat Chapter
repeat playback cancels.
Zoom may not work
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
the TV
at different
The A-B
screen
angles as
possible.
an
DVDs.
during
scenes
indication that
recorded
desired
point
screen
During
disc
search
menu
4.
speakers (instead
of the five+ speakers normally required for multichannel audio from a home theater system).
appears
Press ENTER and
press SEARCH. The marker
on the screen.
Or,
playback
a
marker
starts from the marked
Press CLEAR and the marker number is
You
can play any marker
the marker search menu.
Last Scene
This
player
by inputting
its number
on
Press DISPLAY
if you
during playback.
option
will be
from the last disc
remains in memory
the disc from the player or switch
If you load
scene is
a
disc that has the
automatically
scene
recalled.
Note:
option.
highlighted.
This
player
does not memorize the
you switch off the
the disc.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
remove
player.
scene
scene
memorized, the
4 to select the sound
The sound
Memory
memorizes last
that is viewed. The last
off the
3.
playback,
seconds, press b / B to select
number that you want to recall or clear.
even
or
Marked Scene
a
3D surround effect that simulates
multi-channel audio from two stereo
Use 3
on
erased from the list.
3D Surround
2.
Clear
Within 10
3.
Additional features
1.
the disc. The Marker icon appears
to enter up to nine
briefly. Repeat
1.
scene.
a
on
or
repeat function is available only in the
produce
marker, press MARKER
a
To Recall
2.
current track.
To
from up to nine memorized
at the
playback
To enter
the TV
angle
is
switching
?
on some
Marker
a
start
can
markers.
?
on
You
points.
(Track) playback,
will blink
To enter
player
before
scene
of
commencing
a
disc if
to
play
effect, select "Normal".
Screen Saver
1.
Press AUDIO
2.
The
during playback.
"3D SUR." appears
on
the
until
playback, press AUDIO
"3D SUR." disappears from
the
TV
2.
for five
minutes, the DVD
itself off.
Select
You must select the
Time Search
1.
Stop
displayed
Player automatically turns
System
menu screen.
To start
in
Screen Saver is
To return to normal
repeatedly
appears when you leave the DVD
mode for about five minutes. If the
screen saver
player
menu screen.
playing
at any chosen time
Press DISPLAY
on
the disc:
during playback.
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE/STEP for
to be able to select
a
more
than 5 seconds
system (PAL, NTSC).
Press v / V to select the time clock icon and
"--:--:--" appears.
3.
Input
the
required
start time in
seconds from left to
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
17
DVD Audio Discs
Moving
DVD Audio is
success
disc format building
provide high quality,
a new
of DVD to
on
the
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
the disc itself.
DVD Audio
provide higher quality stereo than
a sampling rate of up to 192kHz
44.1kHz for CDs). DVD Audio digital
can
Audio CDs with
(compared
to
sound
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
can
(compared
A
typical
DVD Audio disc contains up to seven times
of a CD. This additional space is
the data
capacity
used for
music, either Advanced Resolution multi-
channel sound
master
quality that is closer to the artist's
recording or for longer recordings. Many DVD
Audio discs contain
on-screen
text, such
as
artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
Press 1/2
3.
or
during playback
Group
on
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
a
Note:
Sometimes the author of the disc creates hidden
content that
can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
control isn't dictated by your DVD Player
it is a
---
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
available
18
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
on-screen
some
Playing
Memory Card
an
Playing
Cards with this DVD
Insert
1.
a
Memory
Press MEMORY
2.
The
and MOVIE files in
play Photo, Music,
can
Memory
the front
menu
Connect the USB device to the USB
front
place.
2.
panel.
Card slot choice
Memory
the TV
1.
player.
Card until it fits into
on
USB
(DNX190UH ONLY)
(DNX190MH ONLY)
You
an
appears
on
3.
Press MEMORY
on
The USB choice
menu
4.
port
on
the
on.
the front
panel.
appears
on
the TV
screen.
Press ENTER.
The
screen.
after power is
panel
menu
appears.
Press MEMORY to exit the
menu.
Note:
If both slots
use
are
connected with
Memory Card,
Memory Card slot.
b / B to select the desired
Press ENTER.
3.
The
menu
appears.
For details
Cards
operation item,
(See page 20-22)
capable
of
Compact
Micro Drive
?
Secure
?
Multi
?
-
-
on
(MP3/WMA), image
can be played.
?
This unit
?
This unit is not
not
can
use
operating.
(JPEG)
files
and
USB HUB.
supported
when the total number of
or more.
The USB function of this unit does not
support all
USB devices.
Plus, RS MMC,
(xD)
Memory Stick (MS), MS Duo, MS Pro, MS Pro
Compatible with: FAT 12, FAT 16, or FAT 32
Only use the memory cards recommended.
?
This unit
?
This unit
supports only USB Flash Memory.
can support USB1.1.
Duo
Write Protect
For cards that have
is
Music files
?
Mini SD
xD-Picture Card
Regarding
Do not extract the USB device in
files is 1000
MMC Mobile
?
operation item,
?
Divx files
(CF)
MMC
each
Notes:
ST1 MD
(MD),
Digital Card (SD),
Media Card (MMC),
on
menu.
?
displaying
Flash Card
?
Remove the USB from the unit.
refer to
Readable Cards
?
Press MEMORY to exit the
refer to relevant page.(See page 20-22)
menu.
each
on
relevant page.
1.
2.
For details
Press MEMORY to exit the
4.
To Remove the USB from the unit
it will not be
a
write
possible
protect switch, if the switch
to write
or erase
the
contents of the card.
Notes:
?
Keep
If
the memory card out of reach of children.
swallowed, seek medical advice immediately.
?
This
?
The
?
If
a
player can not format
reading time depends
a
memory card.
file size or resolution.
on
folder in your memory cards have more than
files, the whole files are not available to read.
1012
?
This unit cannot
play
back the Divx file in the MMC.
Caution
Before you extract your memory cards, you should
press the MEMORY button to display the DVD menu
screen.
Otherwise you will lose your data in your
or the memory card can be damaged.
memory card
19
Playing
an
Audio CD
Programmed Playback
or
MP3/WMA file
This unit
Audio CDs
play
can
or
The program function enables you to store your
favorite tracks from any disc in the player memory.
MP3/WMA files
A program
recorded media.
1.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
Press v / V to select
ENTER and
or
or
MP3/WMA files recorded
MUSIC
menu
appears.
or
track/file then press PLAY or
starts. You can use variable
to page
Audio CD
an
media. AUDIO CD
a
playback
playback functions. (Refer
Insert
contain 30 tracks.
can
16-17.)
2.
Press PROGRAM and the
E
mark will appear
Note:
Press PROGRAM
mode, then the
3.
Select
a
again
to exit the program edit
mark will
E
track
on
the
disappear.
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
5.
When
track
playing
file
a
titles, you
information such
containing
can see
the information
as
by pressing
6.
DISPLAY.
[ Song, Artist, Album, Comment,
Genre
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
ID3 TAG
?
Select the track you want to start
"Program" list.
"Program"
list have
To
normal
resume
playback,
]
select
a
played
once.
playback
track
from
programmed
the list and then press
on
PLAY.
Tips:
?
Press DVD MENU to
?
On
move
Repeat Programmed
to the next page.
Press REPEAT to select
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
?
?
PHOTO word
on
MP3 / WMA disc
limited
?
as
menu
is
highlighted.
with this
compatibility
player
?
is
follows:
within 8
48 kHz
Sampling frequency:
(MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384 kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
within 32
?
top of the
-
-
a desired repeat mode.
repeats the current track
All: repeats all the tracks on programmed list.
Track:
?
?
File
an
names
and must
?
They
ISO 9660 file
should have
incorporate
an
should not contain
system.
a
If you press > once during
the repeat playback cancels.
Erasing
1.
.mp3 or .wma extension.
special letters such as / ?
The total number of files in
than 1012 files.
20
a
Track from
Repeat
"Program"
Track
playback,
List
a
folder should be less
During
STOP
mode, press PROGRAM and the
E
mark will appear
2.
Use vVbBto select the track that you wish to
from the Program list.
erase
3.
Press CLEAR.
tracks
Erasing
1.
maximum of 8 letters
*:"<>letc.
?
play repeatedly.
Note:
-
creates
?
does not
Off(No display):
-
?
Tracks
on
the
During
Repeat step
1~3to
erase
additional
the list.
Complete Program
STOP
List
mode, press PROGRAM and the
E
mark will appear
2.
Use vVbBto select "Clear
All", then press
ENTER.
Note:
The programs are also cleared when the power is off
or the disc is removed.
Viewing
This unit
1.
can
Zoom
JPEG file
a
play
Insert
a
menu
appears
JPEG files recorded media.
JPEG files recorded media. The PHOTO
the TV
on
During watching pictures, press ZOOM to enlarge the
image (3 steps).
You can move through the zoomed picture using bB
video
vVbuttons.
screen.
Note:
When the resolution is set to
720p
or
1080i,
this function is not available.
To rotate
picture
Press v / V
2.
Press v / V to select
folder, and press ENTER.
a
A list of files in the folder appears.
3.
If you want to view
v / V to
4.
highlight
particular file, press
file and press ENTER
To return to the PHOTO
pictures,
while
menu
or
press STOP.
Tips:
?
If you
in
are
previous
a
list,
use
v / V buttons to
Press TITLE to
3.
Press v / V to select
4.
Use B to select
?
There
move
three Slide
?
starts. The
a
PHOTO
photo
to
icon then press ENTER.
playback will continue until
pressed.
720p
On
picture,
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
watching
help menu.
When
top of the
on
a
picture,
menu
is
highlighted.
press RETURN to hide
menu
viewing
displayed on
isset to 720p or
be
JPEG
file,
the TV
the
screen
help
menu
1080i,
Card.
Memory
only
the desired music while
watching
Operations
program the desired tracks from the "MUSIC"
and then proceed as above.
JPEG disc
limited
?
a
or
Tip:
To listen to
While
menu.
file.
This function is not available for
?
ENTER.
the
display
>>
PHOTO word
?
types of file in
this function is not available.
.
?
watching
the two
When the resolution is set to
to the next page.
: >>>
Speed options
(Normal) and > (Slow).
Use vVbBto highlight
Then, use b / B
select the option you want to use then press
are
(Fast),
to rotate the
Notes:
?
Press DVD MENU to
containing
2.
STOP is
highlight
picture
player.
Playback
and press ENTER.
?
Insert the disc
the
file list and want to return to the
Folder
a
counter clockwise.
picture
PLAY.
watching
or
To listen to MP3 music while
1.
a
a
during showing
clockwise
picture
compatibility
with this
is
player
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
will not
to read the disc's contents. If you do not
if the resoulution
1080i.
on-screen
display
after several
minutes,
see an
some
of
the files may be too large
reduce the resolution
of the JPEG files to less than 5 million pixels and
---
Slide Show
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER.
burn another disc.
?
?
Press PAUSE/STEP
The
2.
player
will
now
PAUSE/STEP
during
slide show.
go into PAUSE mode.
To return to the slide
Moving
show, press PLAY
or
?
press
folder should be less
again.
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
?
to another File
Press SKIP
a
than 1012 files.
Still Picture
1.
The total number of files in
If the files have
rename
?
File
them
names
shown
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
without
as
into the CD
as
able to be read
are
copying
by
".jpg"
extension will not be
this unit. Even
JPEG
image
though
the files
files in Windows
Explorer.
21
Playing
this DVD
Using
1.
a
Insert
menu
DivX Movie file
Player
you
can
play
DivX disc
DivX file.
?
DivX file recorded media. The MOVIE
a
appears
the TV
on
compatibility
?
player
is limited
Available resolution size of the DivX file is under
720x576
screen.
with this
follows:
as
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
?
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
"
"
_
display.
?
2.
Press v / V to select
a
folder, and press ENTER.
?
can use
to page
(Refer
4.
variable
Press STOP to
menu
playback
16-17.)
functions.
frame is
interleaved, either video
*
stop the playback. The Movie
GMC?
DivX
in
previous
a
file list and want to return to the
Folder
remote to
list,
the v / V buttons
use
on
Press DVD MENU to
?
On
move
Playable
to the next page.
CD with
?
The
?
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
?
picture may not displayed properly while DivX
playback. Set your TV system to AUTO or PAL-60
mode to restore the picture, if available.
If the Disc Subtitle
DivX subtitile
setup
menu
does not have the
to
language you
going
displayed properly.
are
a
play,
the
subtitle may not be
Notice for
displaying
If the subtitle does not
the DivX subtitle
display properly during
press and hold SUBTITLE about 3 seconds
then press b / B to select another language code until
playback,
the subtitle is
displayed properly.
Note:
signal on a DivX file stored
in a memory card/USB is over 2Mbps, it can be
displayed like a still image.
22
different levels of GMC
called
1-point, 2-point,
or
encoding,
3-point GMC.
DivX file
.avi, .mpg, .mpeg
Playable
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Playable
Codec format
"DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "XVID",
"MP43", "3IVX".
Playable
Audio format
"Dolby Digital", "DTS", "PCM", "MP3", "WMA".
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384kbps (WMA)
Not all the WMA Audio format is compatible with
?
-
-
?
-
-
When the bitrate of video
encoders, like
Xvid, have this option.
are
usually
MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE word
on top of the menu is highlighted.
a
or
There
the
and press ENTER.
highlight
?
audio is
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
appears
are
or
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
MPEG4 standard. Some MPEG4
If you
30
outputted.
?
Tips:
?
over
If the video and audio structure of recorded
file is not
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
You
screen
normally.
A list of files in the folder appears.
3.
If the number of the
per 1 second, this unit may not operate
?
this unit.
Controlling
other TVs with the
remote control
You
can
Maintenance and Service
Refer to the information in this
control the sound
level, input
power switch of your LG TV with the
control.
source, and
remote
supplied
a
Handling
the Unit
When
You
can
control the sound
source, and
well. If your TV is
level, input
power switch of non-LG TVs as
listed in the table below, set the
appropriate
manufacturer code.
While
down TV POWER
button, press the
holding
number buttons to select the manufacturer code
for your TV
2.
(see
the table
more
them
than
at
one
a
listed, try entering
time until you find the
one
that works
Manufacturer
Code Number
LG / GoldStar
1
(Default),
2
volatile
liquids
such
as
insecticide
the unit.
or plastic products in contact
long period of time. since they
a
leave marks
the surface.
Cleaning
on
the unit
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
or
use
thinner,
strong solvents such
as
1,3,4
Samsung
6,7
Sony
8,9
Maintaining
Hitachi
4
The unit is
on
the
your TV,
Depending
function
TV,
after
as
might damage
alcohol, benzine,
the surface of the
the Unit
a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished.
some or
even
these
unit.
all buttons may not
the correct
entering
manufacturer code.
?
packing
Do not leave rubber
Zenith
Notes:
?
use
near
with the unit for
surfaces
on
carton and
To clean the
with your TV.
?
original shipping
the exterior surfaces clean
Do not
?
code number is
one
the unit
factory.
spray
Code numbers of controllable TVs
If
the
save
Keeping
?
below).
Release TV POWER button.
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the
1.
shipping
Please
chapter
service technician.
contacting
If you enter a new code number, the code number
previously entered will be erased.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
setting.
Set the
appropriate
code number
again.
23
Reference
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a
Area code from this list.
Area
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Herd and Mcdonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Czech
24
Code
Afghanistan
Argentina
Republic
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD player does
?
No disc is inserted.
?
the power cord into the wall outlet
Plug
securely.
Insert
a
in the
display
disc.
(Check
the disc indicator
window is
lit.)
not work.
No
picture.
?
The TV is not set to receive DVD
Select the
?
mode
signal output.
?
The video cable is not connected
on
appropriate
video
input
the TV.
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
?
The
equipment
connected with the
audio cable is not set to receive DVD
audio receiver
signal output.
?
?
The power of the equipment connected
with the audio cable is turned off.
?
The AUDIO
?
wrong
?
The DVD
not start
player does
playback.
unplayable
are
Turn
the
on
connected with
equipment
the audio cable.
set to the
disc is inserted.
Set the AUDIO
option to the correct
position, then turn on the DVD player
again by pressing POWER.
Insert
?
disc.
playable
a
(Check
the disc
type and regional code.)
?
The
?
The remote control is not
The remote control
does not work
An
options
position.
mode of the
input
you can listen to the
sound from the DVD player.
so
rating
the remote
properly.
?
level is set.
sensor on
pointed at
player.
the
rating
level.
Point the remote control at the remote
?
the DVD
sensor
The remote control is too far from the
DVD
Change
?
of the DVD
Operate
?
the DVD
player.
player.
the remote control closer to
player.
Specifications
DIGITAL OUT (COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
General
Power
requirements:
AC 200-240 V
Power
consumption:
10W
,
50/60 Hz
DIGITAL OUT
3 V
Dimensions
(Approx.):
430x35x242mm(17x1.4x9.5inches)
(WxHxD)withoutfoot
Weight (Approx.):
1.9
x
1
Laser:
kg (4.2 lbs)
Semiconductor
laser, wavelength
650
nm
PAL / NTSC
Signal system:
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
5 % to 90 %
Outputs
CD:8Hzto20kHz
75 Ω, sync
(p-p),
(TO TV)
ratio:
Signal-to-noise
VIDEO OUT:
1.0 V
(OPTICAL):
Optical jack
75 Ω,
System
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
(p-p),
negative,
RCA jack
x
More than 100 dB
1 /
SCART
COMPONENT VIDEO OUT:
OUT connectors
only)
Dynamic
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
range:
More than 95 dB
Video cable
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1/
SCART (TO TV)
are
subject
to
(DVD/CD)
Accessories:
AUDIO OUT:
Note: Design and specifications
(ANALOG
Harmonic distortion: Less than 0.008%
Batteries
change prior
(1),
Audio cable
(1),
Remote control
(1),
(2)
notice.
25
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
the
provide
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
in
and
guarantee does
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 0870 873 5454
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RD0082W
Download PDF