LG | DR4810 | LG DR4810 Owner’s Manual

DR4810FVL_LGEUK_ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
:
DR4810
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Safety
Precautions
POWER: This DVD Recorder
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
should be removed and
the
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
a
risk of electric
shock to persons.
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
wiring
such
as a
book
case or
equipment
in
confined space
a
similar unit.
a
suitable
type fitted. Please refer
plug removed from the mains
destroyed. A mains plug
DVD Recorder must be
wires is hazardous if inserted in
a
of
or
with the earth
green and yellow.
If any other plug is
or
to
fitted,
symbol
use a
lead of this
with bared
mains socket.
Do not connect either wire to the earth
letter E
5 amp
pin,
or
marked with the
coloured green
or
fuse, either in the plug,
at the distribution board.
IMPORTANT: The wires in this mains lead
accordance with the
BLUE:
NEUTRAL,
following
are
coloured in
codes:
BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD Recorder may not
correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N
WARNING: Do not install this
supply
instructions below:
WARNING: A mains
-
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
mains
supplied with a BSI 1363
approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA
approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or
"LG Electronics U.K.Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug
OF ELECTRIC SHOCK
This
on a
WIRING: This DVD Recorder is
CAUTION: TO REDUCE THE RISK
DO NOT REMOVE COVER
operates
110-240V~,50/60Hz.
or
coloured black. The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L
or
coloured red.
NOTES ON COPYRIGHTS:
It is forbidden
This DVD Recorder
To
ensure
manual
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
CAUTION:
proper
carefully
employs
use
of this
a
Laser
product, please
read this owner's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
other than those
System.
specified
authorized service location
the
performance
of
procedures
herein may result in hazardous radi-
ation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
This
product
is manufactured to
the radio interference
DIRECTIVE
73/23/EEC.
2
comply with
requirements of EEC
89/336/EEC, 93/68/EEC and
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
to
Table of Contents
INTRODUCTION
DVR HOOKUP
SafetyPrecautions.......................2
TableofContents......................3-4
DVDRecorderOverview.................5-8
RecordableDiscs.......................5
PlayableDiscs.........................5
Disc-relatedterms......................5
TypesofvideoCDs......................5
AboutDVD-RandDVD-RWdisc.
.
.
.
.
.
.
.
.
.
.
.6
.6
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
6
About word'Original' and'Playlist'.
6
AboutDVDrecording...................6-7
Disc types and recording formats, modes,
andsettings........................6
?Notesforrecording...................7
.7
?RecordingTVaudiochannels.
.7
?Restrictionsonvideorecording.
.
.
.
.
.
.
.
.
.
?
.
?
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatis'CPRM'?....................7
?Copyright..........................7
Precautions...........................8
?Handlingtheunit....................8
?Cleaningtheunit....................8
Remote Control Operation Range.
8
Remote Control Battery Installation
8
?
.
.
.
.
.
.
.
.
.
.
.
.
.
?
NotesonDiscs.........................8
Connections........................13-16
ConnectingtotheAerial.................13
ConnectionstoYourTV..................13
14
Connecting to a cable box or satellite receiver.
14
Connecting an external decoder box
ConnectingtoanAmplifier...............15
Accessory Audio/Video (A/V) Connections
.
.
.
.
.
.
.
.
.
.
toDVDRecorder......................16
.16
ConnectingaDigitalCamcorder.
BeforeOperation.....................17-29
InitialSettings.........................17
GeneralOperation.....................17
.
.
.
.
.
.
.
.
.
General...........................17-19
?AutoProgramming..................17
?ProgramEdit....................18-19
?AutoClockSet.....................20
?ManualClockSet...................20
?TVAspect........................20
?DisplayMode......................21
?AV1Decoder......................21
?PBC.............................21
?FactorySet.......................21
Language............................21
?DisplayLanguage...................21
?DiscLanguage.....................21
?Handlingdiscs......................8
?Storingdiscs.......................8
?Cleaningdiscs......................8
AboutSymbols.........................8
?Aboutthesymboldisplay............8
About the disc symbols for instructions
8
Audio...............................22
FrontPanel.............................9
?Vocal............................22
?
.
.
.
.
FunctionDisplayWindow................10
RemoteControlOverview................11
RearPanel............................12
?DolbyDigital.......................22
?DTS.............................22
?MPEG...........................22
?SamplingFrequency.................22
.22
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
Lock(ParentalControl)...............23-24
?SetPassword......................23
?Rating...........................23
?CountryCode......................24
Recording.........................24-25
?RecordModeSet...................24
?RecordAspect.....................24
?DVRecAudio......................25
?AutoChapter......................25
Disc..............................25-26
?DiscFormat.......................25
?DiscProtect.......................25
?Finalize..........................26
?DiscLabel........................26
General
?
Explanation of On-Screen Display. 27-29
27
Displaying Information While Watching TV
Disc
Information
on-screen
27-29
Displaying
.
?
.
.
3
INTRODUC
Table of Contents
PLAYBACK
RECORDING
.30-33
OperationwithDVDandVideoCD.
PlayingaDVDorVideoCD...............30
.
.
.
.
.
GeneralFeature.......................30
?MovingtoanotherTITLE.............30
30
Moving to another CHAPTER/TRACK.
?
.
.
.
?Search...........................30
?
Still Picture and
Frame-by-Frame Playback
.
30
?SlowMotion.......................31
?Random..........................31
?Repeat..........................31
?RepeatA-B.......................31
?TimeSearch......................31
?Zoom............................32
?MarkerSearch....................32
?
Checking
the contents of
BasicRecording........................37
BasicRecordingfromaTV...............37
InstantTimerRecording.................37
Playing your recordings on other DVD players 37
?FinalizingaDisc....................37
TimerRecording.......................38
Clean-upRecording....................38
39
Checking Timer Recording Details
.39
CancelingaTimerRecording.
39
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
39
.40-41
RecordingfromExternalInput.
40
Recording from External Components
40
Recording from a Digital Camcorder
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WhatisDV?..........................41
DVDVideodiscs:Menus.............32
?TitleMenu........................32
?DV-RelatedMessages...............41
?Troubleshooting....................41
?DiscMenu........................32
?CameraAngle.....................32
.32
ChangingtheAudioSoundtrack.
.33
?ChangingtheAudioChannel.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?3DSurround......................33
?Subtitles..........................33
?InstantSkip.......................33
.33
?FindingLocationsonaDisc.
?LastConditionMemory..............33
?PIP(PictureinPicture)...............33
.34-35
AudioCDandMP3Operation.
.34
PlayinganAudioCDorMP3Disc.
NotesonMP3Recordings...............34
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Pause...........................35
?MovingtoAnotherTrack..............35
?RepeatTrack/All/Off.................35
?Random..........................35
?3DSurround......................35
?Search...........................35
EDITING
VR Mode:
42-48
Original and Playlist Editing
Titles,ChaptersandParts................42
AddingChapterMarkers.................42
42
Changing Title or Chapter Thumbnails.
.43
UsingtheOriginal(Title)menu.
.43
UsingtheOriginal(Chapter)menu
.44
UsingthePlaylist(Title)menu.
.44
UsingthePlaylist(Chapter)menu.
MakingaNewPlaylist...................45
Adding Additional Title/Chapters to the Playlist 45
46
Deleting an Original or Playlist Title/Chapter
DeletingaPart........................46
.47
Undoing/RedoingtheLastEdit.
NamingaTitle........................47
.48
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................48
.49
VideoMode:OriginalEditing.
UsingtheTitleList.....................49
DeletingaTitle........................49
.49
Ifthedischasalreadybeenfinalized.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?RepeatA-B.......................35
Programmed Playback with Audio CD and MP3 36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REFERENCE
LanguageCodeList.....................50
CountryCodeList......................51
Controlling Your TV with the Supplied Remote 52
Troubleshooting.....................53-54
Specifications.........................55
.
About the
symbols
Indicates hazards
itself
4
or
.
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
DVD Recorder Overview
Recordable Discs
otes
on
DVDs and Video CDs
Some
12cm/8cm, single-sided, single layer disc
Approx.
max.
240 minutes
recording time (LQ mode):
(4.7GB), 80 minutes (1.46GB)
12cm/8cm, single-sided, single layer disc
Approx.
max.
240 minutes
recording time (LQ mode):
(4.7GB), 80 minutes (1.46GB)
otes
--
--
--
This recorder cannot record CD-R
or
CD-RW discs.
DVD-R/RW and CD-R/RW discs recorded
using
a
or
on
the recorder's lens.
If you record a disc
if it is recorded in a
using a personal computer, even
compatible format, there are
may not play because of the settings
in which it
create the disc.
for
more
detailed
Discs
Playable
DVD
(8
cm
disc)
addition, this unit
can
or
play
MP3
a
CD-R
or
On
CD-RW that
files, DVD±R, DVD±RW,
or
some
on
the conditions of the
CD-R/RW
played
recording equip(or DVD±R/±RW) disc itself,
(or DVD±R/±RW) discs cannot be
the CD-R/RW
on
the unit.
or
title reference number
enabling
a
CD and audio CD
picture
or a
only)
piece on a video CD
assigned a track number,
musical
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
moving pictures
Types
There
and still
of video CDs
are
two
types of video CDs:
Video CDs
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
a
audio CD. Each track is
Scene
otes
ment
(Video
enabling
disc)
assigned
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Sections of
and SVCD.
Depending
Each title is
Audio CD
cm
feature content
you to locate it
or an
cm/12
accompanying
or
music album.
(VCD)
(8cm/12cmdisc)
(8
contains audio titles
(DVD only)
The main film content
Track
cm/12
Video CD
--
Disc-related terms
condensation
application software used to
(Check with the software publisher
information.)
--
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
Title
of the
--
back features of the unit may not be available or other
functions may be added.
Refer also to the instructions supplied with the DVDs
personal computer or a DVD or CD recorder may not
play if the disc is damaged or dirty, or if there is dirt of
cases
In
playback operations of DVDs and Video CDs may
be intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some play-
(the
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
irregularly shaped CDs (e.g., heart-shaped
octagonal). Doing so may result in malfunctions.
use
system via
menus, search
functions,
or
other
typical computer-like operations. Moreover, high resolution still pictures can be played if they are included on
the disc.
Regional
code of the DVD Recorder and DVDs
This DVD Recorder is
tured for
playback of
region
software. The
designed and manufacRegion 2 encoded DVD
code
on
the labels of
some
discs indicates which
type of DVD Recorder
those discs. This unit
can
play only
can
2
DVD
play
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
DVD discs labeled 2
ALL. If you try to play any other discs, the message
"Incorrect region code. Can't play back" will appear on
or
the TV
screen.
code label
area
Some DVD discs may not have a region
though their playback is prohibited by
even
limits.
5
INTRODUC
DVD Recorder Overview
About DVD-R and DVD-RW disc
Is
How
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
DVD-R and DVD-RW discs different?
are
The essential difference between DVD-R and DVD-RW
is that DVD-R is
is
a
a
record-once
medium, while DVD-RW
re-recordable/erasable medium. You
erase a
DVD-RW disc
can
approximately 1,000
re-record/
times.
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R discs and DVD-RW discs recorded in
Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the con-
are
playable
in
some
Video
video
tape?
DVD, you edit by making a 'Playlist' of what
play and when to play it. On playback, the recorder
plays the disc according to the Playlist.
About word
'Original'
and
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
content refers to what's
Original:
recorded
actually
on
?
Playlist:
disc
---
content refers to the edited version of the
how the
Original
content is to be
played.
players.
This indicates
ble of
a
edits. With
mode
(Video Recording)
editing
the disc.
DVD-Video discs.
as
DVD-RW discs recorded in VR
DVD like
a
to
tents of the disc to make them readable to other DVD
players
editing
a product feature that is capaDVD-RW discs recorded with
playing
Recording
About DVD
recording
format.
otes
What
There
are
'recording
two
are
recording
?
modes'?
modes available
using this
recording
recorder: VR mode and Video mode. When
a
DVD-R
disc, recordings
DVD-RW discs
or
Video mode
are
always
?
to
recording
?
?
avail-
Video mode
?
?
?
recording
3 different picture quality/recording time settings available (HQ, SQ, LQ)
Playable on regular DVD players (after finalizing)
Limited editing features
Many functions of this recorder are dependent on the
recording mode. One or more of the symbols
Video
VR
(,
) appear by each function explained
in this manual so that you can see at a glance whether
it's relevant for the disc loaded.
You
can
find
recording
more
modes
information
on
on
disc formats and
next page.
Disc
and
types and recording formats, modes,
settings
can
pre-recorded
DVD-Video
play
three different kinds of DVD disc:
on
(Video mode)
is
DVD-R/RW discs that
a new
was
DVD Forum in 2000. You may therefore
format for
approved by the
experience
in some players.
discs, DVD-RW and DVD-R
discs. The disc format for DVD-R discs is
format"---the
This
in
means
same as
that
once
always
"Video
pre-recorded
DVD-Video discs.
finalized, you
can
play
a
DVD-R
DVD
regular
player.
By default, the DVD-RW disc format is Video Recording
format, though you can change this to Video format, if
required. (Reinitializing the disc will erase the contents
of the disc.)
The recording mode is closely related to the disc format.
If the disc format is Video Recording format, then the
recording mode is VR mode; if the disc format is Video
mode, then the recording mode is Video mode (except
a
DVD-Video, which is
not
recordable, and
so
does not
recording mode).
recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
a
Within the
problems playing recordable DVD discs
Symptoms include video artifacts, audio and/or video
dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this recorder in other players.
6
of your discs.
care
This recorder
for
ote
recording
or
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
have
DVD-Video Format
CD-R
Our company takes no responsibility for recording failure due to power cuts, defective discs, or damage to
proper
VR mode
?
on
the recorder.
?
recording.
recording
3 different picture quality/recording time settings
able (HQ, SQ, LQ)
Not playable on regular DVD players
Recordings can be extensively edited
recordings
CD-RW discs.
in Video mode.
be formatted for VR mode
can
This recorder cannot make
will take up
on
the disc.
DVD Recorder Overview
Notes for
?
The
recorder
on
?
?
?
?
?
are
not exact because the
variable bit-rate video
uses
that the exact
means
compression.
depend
time will
recording
the material
being recorded.
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
?
or
audio
recording
exactly
add up to
always
only,
the
recording
and time
the
remaining
length of the
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 25 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
?
When
using
DVD-RW disc in Video
a
time available will
title recorded
?
?
When
may not
disc.
?
times shown
recording
This
Restrictions
recording
on
The Erase Title
only
increase if you
the disc.
hides the
only
option
in the
title, it does
from the disc and increase
able
(except
disc in Video
Recording
Original (Title) menu
actually erase the title
the recording time avail-
not
for the last recorded title
CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broadcast programs. CPRM stands for Content Protection for
Recordable Media.
This recorder is CPRM
can
setting (page 19)
record either NICAM
is set to
or
audio.
regular
NICAM, you can record the NICAM audio.
non-NICAM, the regular audio is
If the broadcast is
recorded.
which
means
that
can
played
on
can
only
be made
on
DVD-RW discs format-
mode, and CPRM recordings
players
that
are
only be
specifically compatible with
can
CPRM.
Copyright
?
DVD-RW
Auto, then if the
compatible,
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
TV audio channels
If the NICAM
always
What is 'CPRM'?
mode).
This recorder
broadcast is
on a
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
Video that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV inputs
is not recorded correctly with this recorder.
recordings
the last
recording
You cannot record
ted in VR
mode, recording
erase
?
video
on
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the country in which you are making a copy. Copying of copyright material such as
films or music is unlawful unless permitted by a legal
exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
Disc
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
VR mode
Playback, recording, Original/Playlist editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
type
format
DVD-R
Recording
(default)
mode
Functions
7
INTRODUC
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
Discs
discs
Do not touch the
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
by
the
edges
so
playback side of the disc. Hold the disc
fingerprints will not get on the sur-
that
face. Do not stick paper
or
tape
on
the disc.
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
or
turn off the
Storing
After
To
keep
Do not
near
the surface clean
volatile
use
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
long period
playing,
plastic products in
of time. They will
as there may be a considerable
increase inside the car.
a
use a
the unit
solution. Do not
benzine,
or
thinner,
are
moistened with
lightly
strong
use
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
soft, dry cloth. If the surfaces
soft cloth
temperature
the surface.
To clean the cabinet
Use
case.
light,
Cleaning
Cleaning
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
insecticide spray,
or
discs
as
a
extremely dirty,
mild detergent
solvents such
these
might damage
ter outward.
alcohol,
as
the surface
of the unit.
Yes
To obtain
Remote Control
Operation Range
Point the remote control at the remote
sensor
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
"
records.
vinyl
Symbols
About the
and press
the buttons.
symbol display
"
may appear on the TV
This icon means the function
Remote Control
Battery
Installation
manual is not available
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
with
the
rear
of
About the disc
and
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
symbols
A section whose title has
applicable only
symbol.
are
Video
new
on
during operation.
explained in this owner's
that specific disc.
screen
for instructions
two R03
Caution
Do not mix old and
8
No
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
VR
one
of the
to those discs
DVD-R/RW with Video
DVD-RW with VR
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
following symbols
represented by the
recording
recording
mode
mode
Front Panel
INPUT4
(VIDEO
IN/AUDIO IN
(Left/Right))
Connect the audio/video
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Starts
recording.
to set the
STOP
POWER button and indicator
Switches the DVD Recorder ON
Lights up red when
standby mode.
REC (z)
repeatedly
recording time.
Press
Stops playback
OFF.
or
or
(x)
recording.
INTRODUC
the recorder is in
INPUT 4
Pause
PAUSE (X)
playback or recording temporarily,
press again to exit pause mode.
(S-VIDEO IN)
PLAY
Connect the S-Video
external
source
output of an
Monitor,
VCR,
(TV/
To
play
back
a
(N)
disc.
Camcorder, etc.).
Opens
or
OPEN/CLOSE
(Z)
closes the disc
tray.
DV INPUT
Connect the DV
output of
a
Disc
Insert
PROG.
a
digital
camcorder.
Tray
disc here.
(+/-)
Scans up or down through
memorized channels.
window
Display
Shows the current status of the DVD Recorder.
Remote Sensor
Point the DVD Recorder remote control here.
m/.
Go to
beginning
of current
track
chapter/
Press and hold for two seconds for
a
fast
or
to
reverse
previous chapter/track.
search during playback.
>/M
Go to NEXT
Press and hold for two seconds for
a
fast forward search
chapter/track.
during playback.
9
Function
Disc
Display Window
type indicators
type of disc loaded.
REC The recorder is
recording.
Indicates the
Indicates when the recorder is in timer
recording
or a
timer
recording
is
programmed.
HQ, SQ, LQ
Indicates
ST
BIL
Indicates
Indicates when
a
stereo broadcast is
TRK
mode.
received.
BILINGUAL broadcast
a
is
CHP
being
recording
Indicates current
being
chapter
received.
number.
Indicates current track number.
TV
Indicates when the
recorder is in TV tuner mode.
TITLE
Indicates
current title number
DVD
S
A
VCD
-RW
TITLE
TV
TRK
CHP
BIL
ST
REC
HQSQLQ
-RW
Character indicators
Indicates clock, total playing time, elapsed time,
chapter/track number, channel, etc.
10
title
number,
Remote Control Overview
POWER
Switches the DVD Recorder ON
OPEN/CLOSE
OFF.
or
PIP
Selects PIP function
on or
off.
Add the track to the
3D SURR.
Removes
by
the TV tuner.
the
V/DVD
3DS
in
ROGRAM
MENU/LIST
Accesses
a menu.
VOLUME +/--:
Adjusts
on or
between
ROGVOM
off.
OWR
ZOOM
HQ, SQ,
or
RETURN
LQ.
-
TIMER REC
Displays
Timer Record
recording.
-
menu.
REC
Starts
(z)
chapter
or
go to
Setup
menu.
Display.
(O)
Removes the
the
Displays
Selects
v/ V
REC MODE
MER REC
REC
menu.
menu
of
a
video CD
in the
option
an
menu.
(up/down)
Scans up
or
down
through
memorized
channels.
track. Returns to
PLA
of current
beginning
the
bBvV(left/right/up/down)
repeatedly to set
the recording time.
T
Go to next
Playlist
with PBC.
NR
Press
SKIP(./>)
and
DISPLAY
S
mode:
recording
or removes
Accesses On-Screen
MN/
S
Selects the
DVD disc Switches
menu.
Accesses
V
source.
REC MODE
(Title)
menu on a
Original (Title)
SETUP
TV's volume.
PROG. +/--: Selects TV's channel.
AV: Selects the TV's
the disc's Title menu, if
Displays
available.
CAR
TV Control Buttons
POWER: Turns the TV
INTRODUC
image.
TITLE
0-9 numerical buttons
options
the
the
menu.
DVD video
Enlarges
RR
input to use for recording
(Tuner, AV1-4, or DV IN).
Selects numbered
on
on
ZOOM
AV
Changes
mark
or a
Marker Search
POWER
the
by
track number
a
List
Program
TV/DVD
or
List.
Program
CLEAR
during
playback.
recorder tuner
tray.
PROGRAM
Selects 3D SURROUND
To view channels selected
(Z)
and closes the disc
Opens
chapter or track or
previous chapter or track.
ENTER
-
Acknowledges
menu
selection.
SK
SCAN(m/M)
Search backward
or
forward.
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects
a
subtitle
language.
ANGLE
Selects
a
DVD
camera
angle,
if available.
INSTANT SKIP
Skips
15 seconds forward
(about
the
length
on
the disc
of
a typical TV
commercial).
REPEAT
Repeat chapter, track, title,
all.
A-B
Displays
ADO
CA
ANG
SB
MBNA
MAK
NSANSK
SAC
PAUSE/STEP
Pause
viewing
a
press
RAAB
RANDOM
(X)
playback or recording temporarily,
again to exit pause mode.
PLAY
Starts
(N)
playback.
STOP
(x)
Stops playback
or
recording.
CHP ADD
Inserts
a
recording
chapter
a
marker when
playing/
VR mode DVD-RW disc.
THUMBNAIL
Selects
a
thumbnail
picture
chapter for
Playlist menu.
current title and
Original
and
for the
use
in the
MARKER
Marks any
RANDOM
SEARCH
tracks in random order.
information while
TV program.
sequence.
Repeat
Plays
-
Displays
point during playback.
Marker Search
menu.
11
Rear Panel
AERIAL
Connect the aerial to this terminal.
EURO AV 2 DECODER
Connect the audio/video
Set
output of
an
external
source
(Pay-TV decoder,
Top Box, VCR, etc.).
COAXIAL
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
COMPONENT VIDEO OUT
Connect to
a
(Y Pb Pr)
inputs.
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
a
(Left/Right)
TV with video and audio
VIDEO IN 3 / AUDIO IN 3
inputs.
(Left/Right)
Connect the audio/video
output of an external
(Audio system, TV/Monitor, VCR, Camcorder).
source
AC Power Cord
Plug
OPTICAL
into the power
source.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
S-VIDEO OUT
Connect to
a
S-Video
Input
on
TV.
VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT
VIDEO terminal
depending
on
EURO AV 1 AUDIO/VIDEO
Connect to
a
TV with SCART
jack.
RF. OUT
Passes the
signal
from the AERIAL to your TV/monitor
Caution
Do not touch the inner
pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
12
or
RGB
signal
of EURO AV1 AUDIO/
how you connect the DVD Recorder to the TV.
Connections
ips
Depending
Connections to Your TV
on
your TV and other equipment you wish
are various ways you could connect
Make
connect, there
to
the recorder. Use
only
one
the
of the connections
When
described below.
of the
one
capabilities
using
following connections, depending
existing equipment.
on
of your
the COMPONENT VIDEO OUT
jacks,
set the VIDEO OUTPUT switch to COMPONENT.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
When
System
using
the SCART
jack,
set the VIDEO OUT-
PUT switch to RGB.
best connections.
SCART connection
Caution
--
--
Make
the DVD Recorder is connected
directly to
the TV. Tune the TV to the correct video input channel.
Do not connect the DVD Recorder's AUDIO OUT jack
to the phono in jack (record deck) of your audio syssure
tem.
--
Connect the EURO AV1 AUDIO/VIDEO scart
the DVD Recorder to the
TV
using
the scart cable
Connect the VIDEO OUT
the video in
tection
S-Video connection
jack
Connecting
to the S-Video in
cable
the DVD Recorder to
jack on
using
the TV
on
Connect the S-VIDEO OUT
to the Aerial
jack
on
jack
the TV
the video cable
on
the S-Video
(S).
Component Video
recorder.
Connect the COMPONENT VIDEO OUT
socket
aerial
on
one
end of the aerial cable into the TV
the DVD recorder and the other end into the
input
socket
on
your TV set.
RF coaxial connection
Connect the RF. OUT
jack
DVD Recorder to the
TV
using
Audio
on
the DVD Recorder to the
aerial
input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
an
Y Pb Pr
(Left/Right)
Connect the left and
connection
jacks on the
corresponding input jacks on the
cable (C).
Connection
right
AUDIO OUT
Recorder to the audio left and
using
(V).
the DVD Recorder
using
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the DVD
Plug
jack on
jacks on the
Video connection
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy pro-
system.
corresponding
(T).
in
right
IN
jacks of
jacks on
the DVD
the TV
the audio cables
Recorder's AUDIO
(record deck)
(A). Do not connect the DVD
OUT jack to the phono in jack
of your audio
system.
Rear of TV
Aerial
SCART INPUT
ANTENNA
INPUT
AUDIO INPUT
VIDEO
INPUT
Rear of TV
SCART INPUT
S-VIDEO
L
R
INPUT
COMPONENT VIDEO INPUT
Y
Pb
Pr
AUDIO INPUT
L
VIDEO
INPUT
R
R
T
S
C
AV
Rear of DVD Recorder
Rear of DVD Recorder
13
DVRHOKUP
Connections
(Continued)
to a cable box or
Connecting
Connecting
satellite receiver
If you have
decoder,
a
cable
or
satellite receiver with
on this page. If you
box for your cable/satellite
instructions on the right.
a
built-in
?
the
are
using
TV,
set up
a
If you have an external,dedicated decoder box for your
satellite or cable TV system, use the setup described on
as
separate decoder
following
setup
1
on
Connect RF cables
1
as
this page.
the
this page you can:
Record any channel by selecting it on the cable
box/satellite tuner.
Using
2
shown.
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
SCART AV connector
a
on your TV.
This enables you to watch discs.
Use
3
a
DECODER connector to
a
SCART AV connector
on
your cable/satellite tuner.
on
Use
a
SCART cable to connect the EURO AV2
DECODER connector to
SCART AV connector
a
ip
'loop through'
a
allows you to record
tuner in this
a
function. This feature
TV program from the built-in TV
a satellite or cable
recorder, while watching
(see
page
37).
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
a
SCART AV connector
your TV.
Caution:
Caution:
lite receiver
directly
or
cable box.
to your TV
Information from the decoder
pay TV services), is
is off (in standby).
For timer
recording
only
directly
to this
(for example, relating
'through' your VCR, satelAlways connect each compo-
or
to
viewable when this recorder
to work
properly
on
this
recorder,
the satellite/cable box must also be switched
Do not connect this recorder
on
your satellite/cable box.
Do not connect your decoder box
recorder.
This recorder has
nent
input
Use a SCART cable to connect your decoder to
your cable/satellite tuner.
See the manual for your decoder box for more
on
your satellite/cable box.
This enables you to record scrambled TV channels.
channel
3
4
SCART cable to connect the EURO AV2
Connect the cable from the aerial/cable TV outlet to
the aerial
detailed instructions.
This enables you to watch and record TV channels.
2
external
decoder box
connect it to this recorder and your TV
shown
an
ing recording.
It is not possible to watch
another using this setup.
one
on
dur-
TV program and record
AV receiver.
Decoder
Aerial/
SCART AV
Cable TV
Wall Jack
Aerial/Cable TV
Wall Jack
Cable Box
or
Satellite Receiver
Cable Box
or
Satellite Receiver
AERIAL
INPUT
AERIAL
OUTPUT
SCART AV1
SCART AV2
AERIAL
INPUT
Rear of DVD Recorder
14
AERIAL
OUTPUT
SCART AV1
SCART AV2
Rear of DVD Recorder
Connections
Connecting
(Continued)
to an
Amplifier
Rear of DVD Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
Right
your amplifier, receiver,
audio cables (A).
or
jacks on the
in jacks on
system, using the
stereo
right
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
Connect
one
X
A
O
of the DVD Recorder's DIGITAL
AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
COAXIAL
DIGITAL INPUT
You will need to activate the recorder's
2 put. (See
"Audio"
on
page
digital
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
out-
Amplifier (Receiver)
22).
Multi-channel sound
Digital
A
DVRHOKUP
AUDIO OUT
DVD Recorder to the audio left and
multi-channel connection
digital
quality.
provides
the best
sound
For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
otes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--
To
see
the audio format of the current DVD in the
on-
display, press AUDIO.
This recorder does not perform internal
screen
--
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
15
Connections
(Continued)
Accessory Audio/Video (A/V)
Connections to DVD Recorder
Connect the
input jacks (AV3, AV4) on the DVD
jacks on your accessocomponent, using audio/video cables.
Recorder to the audio/video out
ry
Connecting
Using
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Digital Camcorder
the front
connect
a
panel DV IN jack, it is possible to
digital camcorder or video deck or
recorder and digitally transfer DV tapes
DV
DVD-R/RW
or
DVD-R/RW discs to DVD-R/RW.
Use
ote
a
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder/video deck to the front
DV IN jack of this recorder.
jack
panel
ote
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
This
connection to DV
not
jack is for
compatible
with
digital
equipment only.
satellite tuners
or
It is
D-VHS
video decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
R
DV
Digital
OR
DV
IN/OUT
L
VIDEO
OUTPUT
OR
Rear of
DVD Recorder
16
Front of
DVD Recorder
Front of DVD Recorder
Camcorder
Before
Initial
In this
Operation
General
Settings
menu
system, there
several ways to
are
Auto
cus-
tomize the
settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu system will appear
on
the TV
B. For
displayed by pressing
you will
help
see
"B"
on
screen.
the
right
The third level
navigating
side of the
the
can
levels,
menu
menu
be
label to
Programming
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 88 TV
channels.
Preparation:
Connect the DVD Recorder to the desired
shown in
to the Aerial
Connecting
on
type of aerial,
as
page 13.
you go to the next level.
Auto
Programming
Program
To
bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
Stop
Edit
Clock Set
TV
Searching
Aspect
Display
11%
Mode
AV1 Decoder
To go to the next level:
Press B on the remote control.
PBC
Factory
To go back to the previous level:
Press b on the remote control.
General
1
1
Operation
2
Press SETUP.
The
Setup
menu
Setup
menu
appears.
Use v / V to select the General
3
4 option.
5
6
move
2
Use v / V to select the desired
3
4
5
6
While the desired item is
7
Press SETUP to exit the
move
Press SETUP.
The
While the General
appears.
option.
option
is
selected, press B
to
option.
option.
selected, press B
to
to the second level.
Use v / V to select the Auto
to the second level.
Use v / V to select the second desired
Set
Press B to
move
"Start" icon is
highlighted.
Programming
to the third level.
Press ENTER to
begin the channel search.
automatically cycle through all
channels in the area and place them
The tuner will
Press B to
move
to the third level.
available
in
the tuner's memory.
Use v / V to select the desired
setting
then
press ENTER to confirm your selection.
Some items require additional steps.
Setup
menu.
17
DVRHOKUP
Before
Program
You
can
move,
edit
Operation (Continued)
Edit
a
channel
manually (add, delete,
8
Press RETURN
List
Program
Programming
You
Edit
Program
Edit
nels
Clock Set
TV
Aspect
Display
Edit
perform
manually.
can
a
search to select and store TV chan-
1. Use v / V to select
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Mode
menu
AV1 Decoder
PBC
Factory
List
Program
Set
menu.
2. Use v / V to select
'Program
options then press ENTER.
Program Edit menu appears.
Press SETUP.
1
The
Setup
menu
appears.
Use v / V to select the General
2
3
4
move
option
is
Edit'
option
from the
option.
PR
While the General
Program
name,
etc.).
Auto
to exit
(O) repeatedly
menu.
selected, press B
to
Seek
07
Ch.
MFT
C7
0
OK
to the second level.
Use v / V to select the
press B to
move
"Edit" icon is
highlighted.
Program
Edit
option
then
to the third level.
3. See the
Press ENTER.
5 Program
List
PR-01
menu
b / B
appears.
PR
Ch.
MFT
Station
01
C12
+10
BBC1
v / V
02
C23
0
BBC2
cursor
ITV
03
C7
0
04
C27
-10
05
C17
0
CHTV
06
C33
0
WEST
07
C34
+20
ANGLI
08
C47
0
ABC
09
C10
-60
below to
(left/right):
Moves the
use
cursor
TV2
(up/down): Changes
position.
the
Program
to the
setting
PR: Indicates program number
CH2
Seek: Searches
a
Edit
previous
or
Searching stops
at the current
(display only)
station
b / B to select Seek
10
automatically. Use
option then press v / V.
when the DVD recorder tunes in
a
station.
11
Move
on
next column.
Decoder NICAM
Select
descriptions
menu.
Page Up/Down
Close
Ch.:
Changes the channel number to
option then press v / V.
edit. Use b / B
to select Ch.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
display.
appears
on
the left side of the
menu
7
Use v / V to select
an
then press ENTER
option
to confirm.
Program
Edit
Program
Edit: Edits the select-
Station Rename
ed program.
Move
Station Rename: Edits the sta-
Delete
tion
Decoder On/Off
Move: Moves the
NICAM Auto/Off
location
name.
on
program's
the program list.
Delete: Deletes the program
from program list.
Decoder On/Off: Set the
decoder for the program to On
or Off.
NICAM Auto/Off: Set the
NICAM function to for the program Auto or Off.
18
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
Before
Operation (Continued)
Edit
Program
Sort TV channels
(Continued)
You
Station Rename
You
independently.
Names
can
be up
long.
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
menu
List
manually
program's position
menu.
Program List options then
Keyboard menu appears.
option
from
press ENTER.
Program
123456789
0
ABCDE
J
FGH
I
option
3. Use v / V to select
a
desired
can
a
case
?
for the station. Use vVbBto select
Switches the
keyboard
upper
Small: Switches the
keyboard
to lower
characters.
Switches the
keyboard
to
symbol
char-
acters.
?
a
program
on
the
Cancel: Select to exit the
?
Space:
?
menu.
Setting
List
menu.
the Decoder On/Off
press ENTER.
Program List options appears
Program List menu.
List
cursor
to left
or
Inserts
X
(PAUSE/STEP):
cursor position.
x
(STOP),
a
Setting
cursor
Deletes the after character at the
from
previous
character
position.
on
receive Hi-Fi sound transmis-
can
However, if sound distortion
you can switch Off
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
reception,
Program
List
a
menu.
2. Use v / V to select 'NICAM Auto/Off'
to left
or
List
option
from
then press ENTER. If you select
'NICAM' appears on the menu screen.
Program
Auto,
cursor
(0~9): Enters
location
option
the NICAM Auto/Off
sions in NICAM Stereo.
entering a name
cursor position.
space at the
CLEAR: Deletes the
. / >: Moves
ding
the left side of the
then press ENTER. If you select
'Decoder' appears on the menu screen.
This DVD recorder
right.
Remote control buttons for
(PLAY):
Numbers
on
options
1. Use v / V to select
at the
option from Program List
Program is deleted.
then press ENTER. The
occurs, due to poor
N
menu.
a
position.
b / B: Moves
List
1. Use v / V to select the program you wish to link with
the decoder function on the Program List menu then
On,
space at the cursor position.
Delete: Deletes the previous character at the
cursor
options
Program
?
?
Program
2. Use v / V to select 'Decoder On/Off'
OK: Select to finish.
Inserts
then press
Delete
Space
characters.
Symbols:
position
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
character then press ENTER to confirm your selection.
Alphabet
List
menu
a
?
Program
program
delete
2. Use v / V to select 'Delete'
Alphabet Capital:
from
then press ENTER.
Program
Cancel
menu.
1. Use v / V to select
KLMNOPQRST
OK
List
2. Use v / V to select 'Move'
You
UVWXYZ
case
List
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Deleting
Alphabet Capital
?
Program
ENTER to store.
ABC
a name
the
1. Use v / V to select
options
2. Use v / V to select 'Station Rename'
3. Enter
on
menu
1. Use v / V to select
Program
sort the
menu.
stations
can name
to 5 characters
can
options
right.
the character of correspon-
the selected column.
MENU/LIST, DISPLAY: Switches the keyboard type
(Alphabet Capital, Alphabet Small, Symbols)
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
19
DVRHOKUP
Before
Operation (Continued)
Auto Clock Set
Manual Clock Set
When Channel auto search is
and Date
are
DVD recorder
also set
completed the actual Time
automatically. If the time in the
display
is not correct, the clock must be set
manually.
Auto
1
2
Follow
steps
1-5
Auto
Clock Set
TV
Manual
TV
Mode
--
/
1
Set
Time
----
--
:
--
3
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the General
3
4
5
6
7
While the General
option
is
or
selected, press B
to
move
option
TV
then press
Setup
menu.
-
-
ote
(left/right):
we
Moves the
(up/down): Changes
position.
:
--
cursor
to the
previous
the
setting
at the current
can
choose:
4:3:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
send,
or
recommend that you set the clock
Programming
Program
Edit
Clock Set
TV
Aspect
Display Mode
AV1 Decoder
PBC
Factory
20
--
Aspect
Auto
where the TV station does not
sends wrong date and/or time information and the DVD
Recorder sets the incorrect time.
happens,
manually.
Time
Press ENTER to confirm your setting, then
SETUP to exit the Setup menu.
You
Press SETUP to exit the
If this
Factory Set
4 press
option.
ENTER.
are cases
--
to the third level.
Use v / V to select the Auto
There
/
----
next column.
cursor
to the second level.
Use v / V to select the Clock Set
Press B to
--
Enter the necessary information for date and
b / B
menu.
PBC
Year
time.
v / V
move
Manual
Date
AV1 Decoder
Year
Factory
then
Auto
Aspect
Display Mode
--
AV1 Decoder
PBC
option
Edit
Auto
Date
Clock
Programming
Program
Clock Set
Display
(Auto
press ENTER.
Edit
Aspect
shown above
Use v / V to select the Manual
Programming
Program
as
Set).
Set
4:3
16:9
Before
Operation (Continued)
Mode
Display
Factory Set
Mode
Display
works
setting
only
when the TV
Aspect
ratio is set to "4:3".
You
can
choose:
Letter Box:
-
picture with bands on the
portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
Displays
a
wide
upper and lower
Pan Scan:
-
If you need to, you can reset the recorder to all its factosettings. Select 'SET' icon then press ENTER.
ry
ote
Some
options can
Country Code)
not be reset.
(Rating, Password,
DVRHOKUP
and
that do not fit.
Auto
Programming
Program
Auto
Programming
Program
Edit
Clock Set
TV
Edit
Aspect
Mode
Clock Set
Display
TV
AV1 Decoder
Aspect
Display Mode
Letter Box
PBC
AV1 Decoder
Pan Scan
Factory
SET
Set
PBC
Factory Set
Language
AV1 Decoder
Display Language
We have
for
of
already described, how to connect a decoder
pay-TV station on page 14. For viewing or recording
encoded program from EURO AV1 AUDIO/VIDEO
connector, you do not have to control anything. You just
an
select AV1
ly
until the
by pressing
decoding will start.
source
a
language
for the
Setup
menu
and
on-screen
display.
AV button and wait short-
Choose 'On' if your recorder is connected with
decoder, otherwise leave it set to 'OFF '.
Auto
Select
a
Display Menu
English
Disc Menu
Deutsch
Disc Audio
Italiano
Disc Subtitle
Programming
Program
Edit
Clock Set
TV
Aspect
Display Mode
AV1 Decoder
OFF
PBC
ON
Disc
Select
Factory Set
-
Language
language for the disc's Menu, Audio,
Original: The original language set for the
a
and Subtitle.
disc is
selected.
-
PBC
(PBC)
ON:
setting
to ON
or
can
be
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
to the
PBC.
-
To select another
language,
select Other
then press ENTER. Use the numbered
and ENTER buttons to key-in the correspon-
option
The PBC
-
Other:
OFF: Video CDs with PBC
are
played
the
same
way
as
ding 4-digit
number
according
to the lan-
guage code list on page 50. If you a mistake
before pressing ENTER, press b repeatedly
to delete one by one and correct it.
Audio CDs.
Auto
Programming
Program
Edit
Display Menu
Original
Disc Menu
English
Disc Audio
French
Disc Subtitle
German
Clock Set
TV
Spanish
Aspect
Display
Italian
Mode
Chinese
AV1 Decoder
Polish
PBC
OFF
Other----
Factory
Set
ON
21
Before
Operation (Continued)
Sampling Frequency
Audio
Each DVD disc has
variety of audio output options.
Audio Output according to the type
Set the recorder's
audio
system you
If your receiver
a
96 kHz
of
use.
If your receiver
2-channel
digital
stereo
digital audio outputs
in the PCM 2ch format when you play a DVD video
recorded on the Dolby Digital recording system.
sounds
a
DVD Recorder's
or
(or
amplifier
Dolby Digital decoder).
capable
of
handling
or
other
equipment
Dolby Digital
PCM
DTS
Bitstream
with
amplifier
is
capable
of
handling
select 96 kHz. When this choice is
signals,
made, this unit will pass each type of signal through
without any further
disc
processing.
Dolby Digital
DTS
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
an
is NOT
made, this unit will automatically convert any 96 kHz
to 48 kHz so your system can decode them.
96 kHz
PCM: Select when connected to
decoder
amplifier
select 48 kHz. When this choice is
signals
Dolby Digital
amplifier. The
or
signals,
MPEG
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
MPEG
Sampling Freq.
DRC
DRC
(Dynamic Range Control)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
Vocal
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
DTS
and the
OFF: If you select "OFF", the DTS
through the DIGITAL OUT jack.
signal
is not
output
at
a
quietest ones). Then, you may
losing clarity
lower volume without
or
other
equipment
with
DTS
a
a
movie
of sound. Set
DRC to ON for this effect.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
amplifier
listen to
Dolby Digital
decoder).
DTS
MPEG
Dolby Digital
Sampling Freq.
DTS
OFF
DRC
OFF
MPEG
Bitstream
Vocal
ON
Sampling Freq.
DRC
Vocal
Vocal
MPEG
Set Vocal to ON
DVD is
PCM: Select when connected to
stereo
amplifier.
a
2-channel
The DVD Recorder's
digital
digital
on
the MPEG2
Dolby Digital
DTS
MPEG
or
other
equipment
with
a
Dolby Digital
DTS
MPEG
PCM
Sampling Freq.
Bitstream
DRC
Vocal
22
multi-channel karaoke
a
recording
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a MPEG decoder (or
amplifier
a
mix into normal stereo sound.
system.
an
when
audio out-
puts sounds in the PCM 2ch format when you play
DVD video disc recorded
playing.
only
The karaoke channels
MPEG
decoder).
Sampling Freq.
DRC
Vocal
OFF
ON
on
the disc will
Before
Lock
Operation (Continued)
If you
(Parental Control)
If you
Set Password
Changing
the
forget
forget
your
to clear the current pass-
password,
your
code
4-digit
word, follow the procedure below.
4-digit
1. Press SETUP to
code
display
the
Setup
menu.
2. Use the Number buttons to enter the
Set Password
Chang
Rating
Delete
New Password
"
3. Select "Ye s then press ENTER. The 4-digit
is cleared. Enter a new code as shown left.
Code
Country
number
6-digit
"210499".
password
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
1
2
3
4
5
6
Press SETUP.
The
Setup
Level 1 to 8, and
menu
appears.
option
is
alternatively,
option.
selected, press B
to
rated from
scenes are
Ratings
are coun-
The Parental Control feature allows you
discs from being played by your children or to
prevent
have certain discs
option.
with alternative
played
scenes.
Rating
No Limit
Country Code
8
(Adult)
7
Press B to
move
to the third level.
6
5
4
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
repeatedly
a
2
1
mistake before
to delete
1
2
Follow
steps
pressing ENTER,
password numbers one by
press b
one
then correct it.
"Change"
is
selected, press ENTER.
Follow
move
6
Eight (8)
mistake before
repeatedly
to delete
then correct it.
pressing ENTER, press
password numbers one by
shown above to the left
has the least
has the most
rated
played. Higher
and press
unless
restrictions.
playback
an
alternative
restrictions.
scenes
not suit-
scenes
will not be
played
scene
is available
on
The alternative must have the
If
same
rating
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
ip
a
as
able for children. If you set a rating for the recorder,
all disc scenes with the same rating or lower will be
lower
If you
to the third level.
Level 1 to 8: Some discs contain
4-digit password using the numbered
a personal 4-digit security
password then press ENTER.
ENTER
Rating option.
No Limit: If you select No Limit, Parental Control is
play in full.
a
4-digit password again
to verify.
(Set
not active. The disc will
buttons to create
Enter the
shown above to the left
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
If you select "Delete" then press ENTER. The password is deleted.
Enter
as
Use v / V to select the
tons. One
While
1-3
(Kids)
Password).
Press B to
ip
If you make
3
a
word, then press ENTER.
9
suitable
discs.
to
or
Set Password
Use v / V to select the Set Password
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass-
8
more
on some
disc
scenes are
to the second level.
tons to create
7
complete
try-dependent.
to
While the Lock
to the
the disc. These
available for selection
Use v / V to select the Lock
move
applies
scenes on
b
one
6
one.
no
Press ENTER to confirm your rating
then press SETUP to exit the menu.
selection,
23
DVRHOKUP
Before
Country
Operation (Continued)
Code
Enter the code of
Recording
country/area
a
used to rate the DVD video
Code
(See "Country
whose standards
disc, referring
were
to the list
List", page 51.).
Record Mode Set
You
can set the picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality).
Set Password
Rating
Rec Mode Set
Country
US
Code
Rec
Aspect
VR Mode
SQ
Video Mode
SQ
DV Rec Audio
Auto
1
Chapter
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Lock
3
4
5
6
While the Lock
move
option
is
option.
selected, press B
to
to the second level.
Use v / V to select the
Press B to
move
Country
Code
option.
to the third level.
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passa
word, then press ENTER.
ip
If you
a
mistake before
repeatedly
to delete
pressing ENTER, press
password numbers one by
7
8
Shift the
The
2
3
4
5
6
7
Setup
While the
to
move
Recording option
Press B to
move
or
the v / V
is
(HQ, SQ,
Press B to
is
move
v / V to select
a
(HQ, SQ,
a
or
desired Record Mode for
LQ)
to Video Mode
second
the
or
Press ENTER to confirm your country code
then press SETUP to exit the menu.
24
then
use
LQ).
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
Aspect
recording,
4:3
can set the recording aspect ratio
you're recording (16:9 widescreen,
you
standard).
Rec
Aspect
DV Rec Audio
Auto
9 selection,
option
desired Record Mode for Video
Rec Mode Set
using B buttons and select
character using v / V buttons.
option.
highlighted.
buttons.
cursor
selected, press B
to the third level.
option
Use v / V to select
VR Mode
to suit the material
using
Recording option.
to the second level.
The VR Mode
When
one
appears.
Use v / V to select the Rec Mode Set
Mode
8
menu
Use v / V to select the
Record
b
then correct it.
Select the first character
Press SETUP.
1
Chapter
4:3
16:9
Before
Operation (Continued)
DV Rec Audio
1
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
the other
is for
overdubbing after shooting.
setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
On the Audio 1
Rec Mode Set
Rec
Aspect
DV Rec Audio
Audio 1
Auto
Audio 2
Chapter
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Disc
3
4
5
6
While the Disc
move
is
option
Use v / V to select the Disc Format
Press B to
move
Start icon is
7
to the third level.
Press ENTER.
Disc Format
menu
appears.
a
Mode
recording, chapter markers are put in specified
setting. You can change this interval to 3 minutes, 5 min10 minutes. If you select
None, switch off
Video Mode
chapter marking altogether
Separation setting.
Rec Mode Set
Rec
a
Video
a
desired Disc Format Mode
then press ENTER.
few moments to initialize the disc.
or
Mode)
If you want to change the disc format,
recorded on the disc will be erased.
8
Aspect
Mode
Caution
auto-
with the No
Use b / B to select
(VR
It takes
When
or
DVRHOKUP
option.
Disc Format
Chapter
matic
to
highlighted.
VR Mode
utes
selected, press B
to the second level.
Select
Auto
option.
Press SETUP to exit the
everything
menu.
DV Rec Audio
Auto
Chapter
VR Mode
None
Video Mode
3Min
Disc Protect
When
dental
recording in VR mode, set to
recording, editing or deleting
ON to
prevent acci-
of the disc loaded. If
you need to unlock the disc to make edits, select OFF.
Disc
Disc Format
Finalize
Disc Format
Disc Label
If
you're recording on a DVD-R disc, the recording mode
will always be Video mode.
If you are using a DVD-RW disc, by default it will be VR
mode. You can change this to Video mode from the
Setup menu.
Disc Format
Disc Protect
OFF
ON
Start
Finalize
Disc Label
Disc Protect
25
Before
Operation (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
can
MENU/LIST
or
TITLE.
Use this to enter
a name
for the disc. This
name
appears when you load the disc and when you
disc information on-screen.
?
The disc
?
For discs formatted
will
see
display
be up to 32 characters long.
on a different DVD Recorder, you
limited character set.
name can
only
a
Disc Format
Caution
Finalize
?
Once
edit
you've
finalized
record
or
a
else
anything
record and edit
on
disc
you can't
that disc. You can
recording,
on
this recorder after
Edit
Disc Label
Disc Protect
unfinalizing.
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Disc Protect
1
2
Follow
steps
1
steps
1-3
as
shown
page 25
on
(Disc
Format).
as
shown Disc Format
Use v / V to select the Disc Label
Press B to
Follow
1-3
on
page
25.
3
4 Keyboard
Edit icon is
move
option.
to the third level.
highlighted.
Press ENTER.
2
Use v / V to select the Finalize
3
4
Press B to
Finalize is
move
option.
menu
appears.
DVD-RW
to the third level.
Alphabet Capital
highlighted.
123456789
0
Press ENTER.
ABCDE
J
Finalize
KLMNOPQRST
menu
appears.
FGH
I
UVWXYZ
Finalize
Do you want finalization?
Ok
5
OK
Cancel
5
Select Ok then press ENTER.
The recorder starts finalizing the disc.
long
finalization takes
how much is recorded
titles
on
on
depends
the
on
the
type of disc,
disc, and the number of
the disc. A disc recorded
can
take up to 3-4
minutes to finalize.
ip
If you load a DVD-RW that has already been finalized
on a different DVD Recorder, you can 'unfinalize' it by
choosing
this, you
26
Unfinalize from the Finalize
can
menu.
a name
Space
Delete
for the disc. Use vVbBto select
character then press ENTER to confirm your
selection. Refer step 2 as shown on page 19
a
(Station Rename).
ote
How
Enter
Cancel
After
edit and re-record onto the disc.
doing
6
7
Choose OK then press ENTER to fix the
and return to the
Setup
Press SETUP to exit the
menu.
menu.
name
Before
Operation
General
Explanation of
On-Screen Display
This manual
or
is not available
Displaying
various information about the disc
on-screen
on-screen.
basic instructions for
DVD Recorder. Some DVDs
Recorder
Disc Information
display
can
loaded
operating the
require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
gives
Displaying
You
on
the disc.
Information While
Watching TV
During viewing the TV, press ENTER or DISPLAY
display/remove the information displayed
1
2
Press DISPLAY
information
To
repeatedly to display/change
displayed on-screen.
the
the on-screen display, press
repeatedly until it disappears.
See the descriptions on next pages for detailed
explanation during playing a disc.
remove
DISPLAY
Temporary
Feedback Field Icons
to
Resume
Action
on-screen.
play
from this
prohibited
or
point
not available
e.g., when DVD-RW in VR mode is inserted.
otes
Indicates channel
audio
number,
station name, and
signal (NICAM, STEREO, MONO)
received by the tuner.
Indicates the record
Some discs may not
provide all of the features on the
display example shown on next pages.
If no button is pressed for 20 seconds, the on-screen
display disappears.
on-screen
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
DVD-RW
PR-06
VR Mode
SQ
1H 32M Free
N STEREO
ABC
28/8/2003 11:35
Indicates current date and time.
27
DVRHOKUP
Before
Operation
Disc Information
Displaying
on-screen
DVD
(Continued)
Shows the
elapsed playing
time
and total time.
Shows the current
title/chapter
number
Shows the Current
TITLE: 1/4
and total number of
CHAPTER: 3/28
/
0:06:32
mode.
2:12:10
titles/chapters.
Menu
Function (Use v / V to select desired option)
Options
Title Number
Shows the current title number and total number of
1/6
Chapter
Number
4/26
titles,
and
0:10:30
Audio
and
Shows the
skips
chapter
number and total number of
to the desired
chapter
number.
elapsed playing time, and
point by the elapsed time directly.
searches the
b/B,or
Numbers, ENTER
b/B,or
Numbers, ENTER
b/B,
Numbers, ENTER
Shows the current audio soundtrack
language
Digital Audio
Output mode
1.
and
Subtitle
to the desired title number.
Shows the current
chapters,
Time search
skips
Selection Method
ENG
D 5.1CH
language
ABC
Angle
OFF
1/3
Sound
3D SUR.
encoding method, and
changes the setting.
Shows the current subtitles
changes
the
language,
number, and
channel
language,
and
angles,
and
angle number and total
changes the angle number.
Shows the current sound
changes
the
mode,
number of
b/B
and
b/B
setting.
Shows the
VCD
b/B
setting.
Shows the current
b/B
elapsed playing
time
and total time.
Shows the current track
number and total number
of
tracks,
or
TRACK
shows PBC
:
Shows the Current
1/17
0:06:32
/
1:00:00
mode.
On mode.
Menu
Function (Use v / V to select desired option)
Options
Track Number
Shows the current track number and total number of tracks
1/4
Time
Audio Channel
0:10:30
STEREO
Sound
PBC On
Shows the
mode,
skip
changes
to the desired track number.
elapsed playing
Shows the audio
changes
and
channel,
time
(Display only).
and
the
setting.
mode,
b/B,or
Numbers, ENTER
--
b/B
the audio channel.
Shows the current sound
3D SUR.
28
or
Selection Method
and
b/B
Before
Operation
Displaying
Disc Information
(Continued)
on-screen
Shows the
VR
time
elapsed playing
and total time.
Shows the title name,
Menu
20/08
Title Number
SQ
mode.
2:12:10
Shows the current title number and total number of
1/6
Number
titles,
and
skips
to the desired title number.
Shows the current
4/26
Time search
0:10:30
Digital Audio
Output mode
Subtitle
ORG
/
0:06:32
Function (Use v / V to select desired option)
Options
Chapter
Shows the Current
TITLE
recording date,
recording mode, etc.
ORG: Original
PList: Playlist
D 2CH
chapters,
and
Shows the
number and total number of
chapter
skips
to the desired
OFF
ABC
Sound
elapsed playing time, and
point by the elapsed time directly.
Shows the current audio
nel
and
number,
changes
changes
the
changes
b/B,or
Numbers, ENTER
and chan-
b/B
and
b/B
setting.
the
and
mode,
b/B
setting.
Shows the
Video
language,
b/B,or
Numbers, ENTER
b/B,
Numbers, ENTER
encoding method,
the setting.
Shows the current sound
3D SUR.
number.
searches the
Shows the current subtitles
language
chapter
Selection Method
elapsed playing
time
and total time.
Shows the title name,
Menu
20/08
Number
4/26
titles,
and
skips
and
Shows the
Time search
0:10:30
Digital Audio
Output mode
1.D
to the desired title number.
Shows the current
chapters,
skips
chapter
OFF
chapter
elapsed playing time, and
point by the elapsed time directly.
nel
number,
and
changes
encoding method,
the setting.
changes
the
language,
angles,
and
Shows the current sound
Sound
3D SUR.
changes
the
and chan-
and
angle number and total
changes the angle number.
setting.
mode,
Selection Method
b/B,or
Numbers, ENTER
b/B,or
Numbers, ENTER
b/B,
Numbers, ENTER
b/B
b/B
setting.
Shows the current
1/1
number.
searches the
Shows the current audio
2CH
number and total number of
to the desired
Shows the current subtitles
language
ABC
Angle
mode.
2:12:10
Shows the current title number and total number of
1/6
Subtitle
/
0:06:32
SQ
Function (Use v / V to select desired option)
Options
Title Number
Chapter
Shows the Current
TITLE
recording date,
recording mode, etc.
number of
b/B
and
b/B
29
DVRHOKUP
with DVD and Video CD
Operation
Playing
DVD
a
or
Video CD
DVD
Playback Setup
Turn the TV
on
When
and select the video
input
source con-
the
1
system: Turn the audio system
input
source
on
(Z)
to open the disc
disc has
a
2
3
Press OPEN/CLOSE
READING appears
tray.
(Z)
The
is
to close the
or
title, you
can move
to
v / V to select the title
(0-9)
or
When
tray.
b / B to select
a
title number.
to another CHAPTER/TRACK
Video
VR
VCD
loading
title
on a
disc has
more
than
one
chapter/track,
select the next
chapter/track or to return to the beginchapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
ning
displayed
may be displayed first after
Video CD which contains a menu.
a
1/4
you can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
the
menu screen
DVD
use
4/26
ip
a menu screen
one
tray, with the
instead.
If
than
Then, press the appropriate numbered button
Moving
display window, and
playback starts automatically. If playback does not
start, press PLAY (N).
In some cases, the disc menu might appear
on
more
follows:
icon.
DVD
Load your chosen disc in the
playback side down.
as
1/6
VR
Press DISPLAY then
and select
connected to the DVD Recorder.
Press OPEN/CLOSE
Video
another title
nected to the DVD Recorder.
Audio
to another TITLE
Moving
a
of the current
DVD
Use the bBvVbuttons to select the
want to
view, then press ENTER
Press TITLE
or
title/chapter
playback.
you
to start
MENU/LIST to return to the
Search
DVD
1 Press SCAN
menu
(m
The recorder will
screen.
Video
or
VR
VCD
M) during playback.
go into SEARCH mode.
now
2 Press SCAN
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
Menu
setting
(O)
to return to the
menu screen.
and the exact
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
using
3
menu screen.
You may also set PBC to OFF under
See page 21.
Setup
Still Picture and
DVD
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
(see
"Rating",
--
on page 23).
DVDs may have a Region Code.
Your recorder will not play discs that have
code different from your recorder. The
this recorder is 2 (two).
Frame-by-Frame Playback
VR
The recorder will
2 You
can
frame
VCD
(X) during playback.
go into PAUSE mode.
back up the picture frame-by-
now
advance
by pressing
or
b / B
repeatedly during
PAUSE
mode.
a region
region code
3 To exit PAUSE
mode, press PLAY (N).
for
ote
General Features
picture frame-by-frame
in
reverse
is not available
for Video CD.
ip
ote
You
otherwise, all operations described
use
the remote control. Some features may also be available
on the Setup menu.
30
Video
1 Press PAUSE/STEP
The
Unless stated
b
menu.
otes
--
(m or M) to select the required
(Reverse play), mX2, mX4, mX8,
mX16, mX100 (backward) or MX2, MX4,
MX8, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To exit SEARCH mode, press PLAY (N).
speed:
ing
can
advance the
PAUSE/STEP
picture frame-by-frame by
(X) repeatedly on the remote
presscontrol.
Operation
with DVD and Video CD
General Features
Video CDs
(Continued)
Video
VR
The recorder will
2 Press SCAN
(m
?
All:
?
OFF: does not
or
3 Use the SCAN
to select the
(m
M)
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8, T
1/4 or T 1/2 (forward).
To exit Slow Motion mode, press PLAY (N).
or
desired
a
repeats
repeats the all tracks
On
a
the
Setup
Video CD with
menu
playback
is not
reverse
possible
the disc.
Repeat
A-B
to
PBC, you
use
the
with
must set PBC to OFF in
Repeat
function. See page
21.
DVD
To
Video
repeat
Repeat
in
on
play repeatedly.
a
VR
A-B
VCD
sequence in
a
title:
1 Press A-B at your chosen
ote
Slow motion
repeat mode.
the current track.
ote
go into PAUSE mode.
M) during PAUSE mode.
The DVD Recorder will enter SLOW mode.
4
Track:
(X) during playback.
now
Repeat Track/All/Off
?
VCD
1 Press PAUSE/STEP
-
Press REPEAT to select
Slow Motion
DVD
(Continued)
icon and 'A-' appears
starting point.
on
the TV
screen.
2 Press A-B
Video CDs.
Repeat
again at your chosen end point.
icon and 'A-B' appears on the TV screen, and the
repeat sequence begins.
Random
Karaoke DVD
VCD
3 To cancel the sequence, press A-B
select OFF.
repeatedly
Time Search
VR
to
1 Press RANDOM
The unit
during playback.
automatically begins Random Playback
"RANDOM" appears
2 To return to normal
playback,
"NORMAL" appears
ip
By pressing
the TV
on
on
and
screen.
SKIP >
during Random playback, the
title (track) and resumes Random
unit selects another
playback.
The Time Search function allows you to start
any chosen time on the disc.
playing
1 Press DISPLAY twice
on-screen
display
appears
This function
only
works with DVD Karaoke discs
or
video CDs without PBC.
Video CD with
Setup
menu
to
use
must set PBC to OFF
the Random function. See
DVD
Video
VR
VCD
-
Repeat Chapter/Title/All/Off
?
Chapter: repeats
?
Title:
a
desired
the current
the current title
repeats
All: repeats the all titles
(VR
use
time of the
v / V to select the Time
on-screen
seconds,
required
can
use
display.
the number buttons to enter
start time. Enter
onds from left to
not enter
right
an
hours, minutes, and
sec-
in the box.
invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
4 Within 20
Press REPEAT to select
OFF:
elapsed playing
numbers.
Chapter
DVD Discs
the
You
Repeat
?
The
screen.
The "0:00:00" appears in the Time Search box.
3 Within 20
PBC, you
page 21.
?
seconds,
Search icon in the
in the
during playback.
the TV
The Time Search box shows the
2 Within 20
a
on
at
current disc.
ote
On
Video
0:10:30
press RANDOM until
the TV
DVD
screen.
on
seconds, press ENTER
to confirm the start
time.
Playback
starts from the selected time
on
the disc.
repeat mode.
chapter.
.
the disc.
mode DVD-RW disc
does not
only)
play repeatedly.
31
PLAYBCK
Operation
with DVD and Video CD
General Features
Zoom
DVD
Video
3
(continued)
VR
VCD
during playback
still
or
playback
to acti-
vate the Zoom function.
Each press of the ZOOM button changes the TV
the sequence shown below.
x1 size → x2 size → x4 size → normal size
2 Use the bBvVbuttons to
zoomed
3 To
in
screen
normal
repeatedly
the
playback, press CLEAR or press
until the normal picture appears.
DVD
six
can
1
Video
start
points
To enter
playback
can
a
VCD
the Contents of DVD Video
Checking
to select
an
highlight
your selection, then press ENTER.
option. Or,
from
a
To Recall
DVD
memorized
disc
on
the TV
point. Up
screen
menu
menu
will appear
on
the
may appear.
angles, spoken lanchapters for the title.
playback,
The disc
2 To
briefly.
points
menu
remove
is
displayed.
the disc menu, press MENU/LIST
will appear
the TV
on
Camera
Angle
DVD
screen.
scene
to
will start from the Marked
a
different
camera
angle
camera
Press ANGLE then press b / B repeatedly
to select a desired angle.
during
playback
The number of the current
3 Press ENTER.
1/3
recorded at different
scenes
angles, you can change
during playback.
Marked
a
again.
on a
press SEARCH.
menu
DVD
1 Press MENU/LIST.
that you want to recall.
RETURN
menu, the
to
If the disc contains
2 Use the bBvVbuttons to select
remove
a
Otherwise, the disc
Disc Menu
1 to enter up to six Marker
The Marker Search
Playback
screen.
be memorized.
Marked Scene
a
the bBvVbuttons to
menu may contain camera
guage and subtitle options, and
mark, follow these steps.
Repeat step
use
2 The
1/6
disc.
4 To
(O).
If the current title has
VR
scene.
the Marker Search menu, press
remove
RETURN
additional Marked
erase
1 Press TITLE.
During disc playback, press MARKER when
playback reaches the spot that you want to
During
To
TV
The Marker icon will appear
1
6
2-4 to
DVDs.
some
memorize.
2
Repeat steps
select"Yes"thenpressENTER.
Title Menu
function may not work for
zoom
Marker Search
You
Useb/Bto
5
Discs: Menus
ote
The
4
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
picture.
resume
ZOOM
through
move
Press CLEAR.
"Delete selected marker? Proceed?" message appears.
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
(Continued)
angle
appears
the TV
on
screen.
ip
scene.
The ANGLE indicator will blink
recorded at different
the Marker Search menu, press
angles
the TV
on
screen
to indicate that
at
scenes
angle switching
is
possible.
(O).
Changing
Marker Search
the Audio Soundtrack
1.
DVD
ENG
D 5.1CH
Press AUDIO then press b / B repeatedly during playa different audio language or audio sound-
back to hear
track if available.
Move
Select
CLEAR
Delete
Close
ote
To clear
a
Marked Scene
1 Press SEARCH
during playback
The Marker Search
2
Some discs feature both
menu
or
will appear
on
Use bBvVto select the Marked
want to
32
erase.
in
stop
the TV
scene
mode.
screen.
that you
tracks. There is
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
recorder to
a
soundtrack,
DTS decoder via
puts. See page
one
of the
15 for connection details.
connect this
digital
out-
with DVD and Video CD
Operation
the Audio Channel
Changing
VCD
With
Video
Last Condition
DVD
STEREO
VR
a
CD, press AUDIO then press
edly during playback to hear
(STEREO, LEFT or RIGHT).
b / B
repeat-
different audio channel
a
With DVD-RW discs recorded in VR mode that have
both
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.
a
(Continued)
main and
a
This recorder memorizes the
This unit
can
off the recorder. If you load
memorized, the latest stop
settings
for the last
a
disc that had its
position
is
settings
automatically
recalled.
--
VR
produce
3D SUR.
VCD
a
3D Surround
two
conventional stereo
playback from
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
2 To turn off the 3D Surround
DVD
PIP
or
(Picture
DVD
system.
1 Press 3D SURR. then press b / B
playback to select "3D SUR.".
Settings are stored in memory for use any time.
This recorder does not memorize settings of a disc if
you switch off the recorder before
it.
effect, which
simulates multi-channel audio
Subtitles
user
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or switch
--
Video
Memory
VR
otes
3D Surround
DVD
Video
repeatedly during
Video
in
commencing
to
play
Picture)
VR
VCD
This function enables you to view the stored stations in
sub picture during playback.
effect, select "NORMAL".
Video
VR
OFF
ABC
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
Skip
Video
Each press INSTANT SKIP
VR
skips
forward 15 seconds.
ote
If
appears, the feature is not available
on
the disc.
On and off
Press PIP to switch
Finding
Locations
on a
Disc
VCD
ton
You
can directly access any point on a video CD using
this function. Use this function only while a video CD is
playing. Playback jumps
1 Press SEARCH
to the
point specified.
during playback.
The progress bar appears
on
the TV
33%
33%
2 Use b / B to find
a
start
position
for
playback.
3 Press ENTER to confirm the selected
Playback
starts from the selected
the sub
picture,
press this but-
mode selection for sub
picture
input mode for the sub picture.
Each time this button is pressed, each input mode for
the sub picture is displayed as shown below.
Press AV to select the
Program
selection for sub
Use v / V to
TRK 1
on
to switch it off.
Tuner→AV1→AV2→AV3→AV4
screen.
PBC
Input
again
position.
position.
picture
the program when sub picture's
input is set to tuner. The selected program number is
displayed on the TV screen. You can view the selected
program
change
by pressing
STOP
(x).
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
ote
This function works
only
when
no
marker is memorized.
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
33
PLAYBCK
Audio CD and MP3
Playing
CD
an
Audio CD
Notes
MP3 Disc
or
MP3
Recorder
can
Before
play
audio CDs.
MP3
Recordings
recordings
files that have
recordings, read the notes
right side of this page.
disc and close the
AUDIO CD
or
MP3 CD
on
appears
on
The recorder
MP3
not read
can
extension other than
tray.
menu
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
on
CD-RW disc.
or
the
An MP3 file is audio data
Also, the DVD
MP3
playing
Recordings on
a
can
MP3 formatted
play
CD-ROM, CD-R
Insert
on
About MP3
The DVD Recorder
1
Operation
the TV
MP3 Disc
compatibility
limited
follows:
1.
screen.
as
CD-R
physical
MP3 file that has
an
a
file
".mp3".
with this recorder is
format should be "ISO 9660" and
"JOLIET".
AUDIO CD
MP3 CD
0:42:12
List
Program
01/14
2.
00:00
Disc List
Program
1/14
TRACK 1
MUSIC
1.mp3
TRACK 2
MUSIC
2.mp3
TRACK 3
MUSIC
3.mp3
TRACK 4
MUSIC
4.mp3
TRACK 5
MUSIC
5.mp3
TRACK 6
MUSIC
6.mp3
TRACK 7
MUSIC
7.mp3
TRACK 8
MUSIC
8.mp3
If you record MP3 files using the software which
a FILE SYSTEM, for example "Direct-
cannot create
0/0
CD" etc., it is impossible to playback MP3 files. We
recommend that you use "Easy-CD Creator", which
creates
3.
an
ISO9660
or
JOLIET file
Total number of files and folders
system.
on
the disc should
be less than 999.
AUDIO CD Menu
MP3 CD Menu
This DVD Recorder
requires discs/recordings
to meet
certain technical standards in order to achieve
2
Use v / V to select
a
track then press PLAY
(N)
ENTER.
or
playback quality.
Pre-recorded DVDs
set to these standards. There
Playback starts.
During playback,
are
the current track's
elapsed playing
menu.
many different types
MP3
files) that
(see above) to
(including CD-R containing
require certain pre-existing conditions
insure compatible playback.
Customers should also note that
ips
required
view TV channel
can
or
video
input
source
AV. If you want to return to the MP3
AUDIO CD menu, press MENU/LIST.
pressing
On the MP3 CD menu, press SCAN (m
to move to the previous or next page.
or
by
or
M)
""
icon
on
the MP3 CD
can
menu
display only
Use vVbBto select
a
then press ENTER.
tracks in the folder.
folder then press
ENTER.
On the MP3 CD menu, press DISPLAY to view
the information of the selected MP3 file.
""
On the MP3 CD menu, select
ENTER to display all MP3 files
on
then press
the disc.
On the mixed CD with audio title and MP3
you
can
menu
3
To
by pressing
stop playback
STOP
34
switch AUDIO CD
(x).
menu
TITLE button
at any other
file,
and MP3 CD
repeatedly.
time, press
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
On the MP3 CD menu, you can display the folder
list on the disc. Use vVbBto select the
Also, you
optimal
automatically
of recordable disc formats
time will appear on the display window and
Playback will stop at the end of the disc.
You
are
sought
from the
copyright
owner.
Audio CD and MP3
CD
Pause
3D Surround
MP3
1 Press PAUSE/STEP
2 To return to
Operation (Continued)
This unit
(X) during playback.
playback, press
(X) again.
PLAY
(N)
or
press
PAUSE/STEP
CD
to Another Track
Moving
Press SKIP .
>
or
Press SKIP . twice
briefly
or
to return to the
step
back to the pre-
On
an
Audio
CD,
directly to any track, enter the
the numbered buttons (0-9) during
to go
using
playback.
Press REPEAT to select
a
CD
desired
?
TRK
(Track): repeats
?
ALL:
repeats the all tracks
?
OFF: does not
MP3
a
home theater
during playback
or
system.
to select "3D SUR.".
2 To turn off the 3D Surround
Search
disappears
effect, press 3D SURR.
from the menu screen.
CD
1 Press SCAN
(m
The recorder will
Search
repeat mode.
or
now
M) during playback.
go into SEARCH mode.
the current track.
on
speed
and direction
are
indicated
on
the
menu
screen.
the disc.
3 To exit SEARCH
CD
Repeat
MP3
during playback or in stop mode.
automatically begins Random Playback and
on
the
menu screen.
2 To return to normal
until "RAND."
ip
By pressing
multi-
mode, press PLAY (N).
play repeatedly.
"RAND." appears
edly
five
more
(m or M) to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
1 Press RANDOM
The unit
from two
2 Press SCAN
Repeat Track/All/Off
Random
effect, which
playback
speakers, instead of the
speakers normally required to listen to
until "3D SUR."
to
3D Surround
a
conventional stereo
1 Press 3D SURR.
vious track.
track number
produce
MP3
simulates multi-channel audio
channel audio from
MP3
briefly during
playback to go to the next track
beginning of the current track.
can
CD
playback,
disappears
press RANDOM repeatfrom the menu screen.
To
repeat
A-B
a
CD
sequence in
a
track:
1 Press A-B at your chosen start
Repeat
icon and 'A' appears
2 Press A-B
The
Repeat
and the
on
the
point.
menu screen.
again at your chosen end point.
icon and 'A B' appears on the menu screen,
-
repeat sequence begins.
3 To exit the sequence and return to normal
A-B again.
during
Random
playback,
the
unit selects another track and
SKIP >
resumes
Random
play-
The
Repeat
icon
disappears
from the
play,
press
menu screen.
back.
35
PLAYBCK
with Audio CD and MP3
Programmed Playback
The
Program function enables you to store your favorite
tracks from any disc in the recorder memory.
Program can contain 30 tracks (Audio CD) or 256 tracks
Repeat Programmed
Press REPEAT to select
(MP3).
Insert
1
an
Audio CD
Audio CD
or
MP3 CD
or
MP3 disc.
menu
3
highlight
the
The selected track is added to the
4
Repeat steps
the Program list.
an
(Track): repeats
?
ALL:
repeats the all tracks
?
OFF: does not
""
icon then
MP3 CD menu, you
list. Select
''
place
can
Program
list.
3
on
on
the List to the
5
6 playing.
to the
Program
0:42:12
4
MP3 CD
Repeat steps
Program list.
3/3
00:00
Program
TRACK 5
MUSIC
1.mp3
MUSIC
5.mp3
TRACK 2
TRACK 3
MUSIC
2.mp3
MUSIC
3.mp3
TRACK 3
TRACK 4
MUSIC
3.mp3
MUSIC
1.mp3
TRACK 4
MUSIC
4.mp3
TRACK 5
MUSIC
5.mp3
TRACK 6
MUSIC
6.mp3
TRACK 7
MUSIC
7.mp3
TRACK 8
MUSIC
8.mp3
on
icon then press
the program list.
Complete Program
""
on
the
Program
Program
list
are
List
on
the
List
icon then press
deleted.
MP3
or
Use vVbBto select the
ip
On the MP3 CD menu, press SCAN
move to the previous or next page.
Press PLAY
(N)
Playback begins
or
(m
or
to
M)
ENTER to start.
in the order in which you
programmed
the tracks.
Playback stops
after
playing
the last
programmed
track
on
the program list.
36
from the
switch the recorder off. If you load a disc that has its
program list memorized, the program list is automatically recalled.
3/3
menu
resume
ENTER.
""
erase
1-2 to delete additional tracks
Use vVbBto select the
Save Your
1
4/14
TRACK 1
To
the
List
Program
user program list for the
disc that you have programmed. Program list remains in
memory even if you remove the disc from the recorder
Disc List
Program
04/14
8 playback,
list.
This recorder memorizes the
List
7
Or,
list.
Use v/V to select the track you want to start
AUDIO CD
Program
ENTER.
icon then press ENTER.
move
the
press CLEAR.
The selected track is deleted
additional tracks
add all tracks
Track from the
a
ENTER.
All tracks
Use vVbBto
on
play repeatedly.
2 Use vVbBto select the
Erasing
Program
repeat mode.
the current track.
1 Select the track that you wish to
Program list.
ip
On
TRK
Erasing
press ENTER. Or, press PROGRAM.
2-3 to
desired
a
?
will appear.
2Usev/VtoselectatrackontheList.
Use vVbBto
Tracks
normal
select
a
playback
track
on
from
programmed
the List then press
then press ENTER.
''
icon
on
the MP3 CD
Basic
Recording
Recording from
Basic
Follow the instructions below to record
starts
Recording
or
stop the
you
Switch
1
immediately
recording.
Instant Timer
TV program.
and continues until the disc is full
a
recordable
a
disc.
Also make
that the TV
sure
input
is set to this recorder.
If you load a completely blank disc, the recorder takes
short while to initialize the disc.
Set
2
Instant Timer
easily
a
1
Use v / V buttons to select the TV channel to
record.
Changing
→
Bilingual
→
Mono
Right
→
steps
TV).
a
1-4
as
shown left
→
Mono
(Basic Recording
time
Continue
→
Stereo
The current audio channel is
?
Follow
TV Audio Channel
Left Mono
recording
(z) repeatedly to select the recordlength.
Recording starts after the first press. Each subsequent press increases the recording time by 10
minutes within free space (maximum 120 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the DVD Recorder will
stop recording and shut off.
REC MODE
Stereo
a
Press REC
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality
3
allows you to make
Recording
preset length without using the program
a
from
2 ing
recording mode as necessary by pressing
repeatedly. (HQ, SQ, LQ)
a
of
Recording
timer.
the recorder and load
on
TV
a
65Min Free
displayed
on-screen.
If the sound is of poor quality when set to Stereo, you
often improve it by changing to Mono.
Instant Timer Record Menu
can
?
If the broadcast is
VR
mode, you
bilingual
and with DVD-RW discs in
select the
can
language by pressing
AUDIO:
Left Mono
language),
?
(Main language), Right Mono (Bilingual
Stereo or Bilingual (Main + Bilingual).
This recorder
record either NICAM
can
audio. If the NICAM
is set to Auto,
NICAM, the audio automati-
to NICAM and you
NICAM audio. If the broadcast is
ular audio is
always
regular
setting (page 19)
then if the broadcast is
cally changes
or
can
record the
the
Checking
Recording Time
Press REC
once
recalled
will
screen
(z)
setting
for
to check the
automatically
recording
time. The
return to the TV
moment.
a
Also, remaining time of recording is shown in the display
window.
To Extend the
Recording Time
The
non-NICAM, the reg-
recorded.
If NICAM sound distortion occurs, due to poor recepcan switch off NICAM setting of the program.
recording time can be extended anytime by pressing REC (z).
Each subsequent press increases the recording time by
10 minutes within free space (maximum 120 minutes).
tion, you
Press REC
4 Recording
(z)
once.
will start.
Caution
(The
REC indicator
lights
in the
display window.)
Recording
If the recorder is
unplugged (or
recording,
while the recorder is
continues until you press STOP
(x)
or
the
there is
the
power failure)
will be
a
recording
lost.
disc is full.
To record for
Recording
5
Press STOP
length
of
time,
see
Instant Timer
right.
(x)
to
stop recording.
Playing Your Recordings
DVD Players
Most
can
Recording
Press PAUSE/STEP
(X)
to pause the disc
When you want to continue
PAUSE/STEP (X).
during
other
recording,
ing
players
can
play
Other
finalized discs
one
player
TV program while watch-
another
Press TV/DVD to select the TV mode
2
ing. The TV indicator appears.
Using the TV, select the channel
during
record-
to be viewed.
came
mode,
with the
to check what kinds of discs it will
a
play.
Disc
recordings in place so that the
played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
Finalizing
1
not. Check the manual that
or
players
DVD-RW discs recorded in VR
play
Finalizing
press
disc
To record
also
finalized
recording.
2
DVD
regular
on
recorded in Video mode. A small number of
To Pause the
1
fixed
a
on
can
'fixes' the
be
MENU/LIST
To finalize
or
a
TITLE.
disc, refer
to "Finalize"
on
page 26.
37
RECODING
Timer
Recording
This DVD Recorder
be
can
programmed
to record up to
7 programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
Press
3 by
To check the
recorded, the starting time and length.
1
indicates that the timer
will appear.
menu
Timer Record
SQ
PR
Date
Start Time
05
9/5 Fr
19:20
Length
correctly
Repeat
PDC
SQ
Once
Off
----
4
198Min Free
Mode
Make
?
PR
one
TIMER REC
Choose
--
Timer Rec List
Close
memorized program number, or
inputs from which to record.
a
of the external
?
Date
?
Start Time
Choose
?
Length
?
Mode
--
Set the
--
Choose
--
recording
start time.
recording length.
record mode
a
sary, to
?
complete recording
Repeat
(Monday
Choose
--
PDC
--
-
a
Friday),
The PDC
time
desired
or
mode, if
(O)
to exit the
Program
List.
that you load a recordable disc and
POWER to switch your unit to Standby.
sure
lights in the display window
standby with the timer active.
The recorder will record the audio according to
current TV tuner setting (Stereo, Left Mono,
Right Mono, Mono, or Bilingual).
Use the AUDIO button to set the audio
or
mode determines how much disc time
is available and switches record
?
(HQ, SQ, LQ,
programmed
The timer indicator
before
AT).
AT (Auto)
is
when
the recorder is in
date up to 1 month in advance.
a
Set the
the Timer Record List
recording
otes
?
?
--
on
the Timer Record List
and recordable disc inserted.
Press RETURN
5 press
C50
Enter
programming,
will appear.
Check field's "Rec. OK"
Press TIMER REC.
The Timer Record
ENTER, the program will be memorized
the DVD Recorder.
?
switching
the recorder into
You must press POWER to
as
the
you want
standby.
stop the timer recording.
neces-
the program.
repeat (Once, Daily
Weekly).
system automatically adjusts the
that even if a program is not
recording
running to schedule, you won't miss it. For PDC
to work properly, you must input the correct
Clean-up Recording
You
simply clean-up (erase) all contents on
recording from the first
the disc. The disc format is not changed.
can
DVD-RW disc then start
tion of
the
sec-
so
1. Switch
on
the recorder and load
2. Press and hold REC
announced time and date of the program you
want to record.
seconds.
Note that PDC may not work with every station.
appears.
(z)
recordable disc.
a
button for
more
than 3
"Delete all titles and record?" message will
3.Useb/Bto
otes
?
?
Stations that
typically include PDC
information in the teletext TV guide pages.
Please refer to these pages when setting a
timer recording.
This recorder takes approximately 20 seconds
to switch on and start recording. This means
that when using PDC, there may be instances
where the beginning of the program is not
use
PDC
recorded.
Enter the necessary information for your timer
2 recording(s).
?
b / B
?
v / V
?
(left/right) move the cursor left/right
(up/down) change the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
--
menu.
?
Press ENTER after
filling
in all the program infor-
mation.
?
38
Press TIMER REC to
display
Timer Record List.
select"Yes"thenpressENTER.
Recording will start. (The REC indicator lights
display window.)
in the
Timer
Recording (Continued)
Checking Timer Recording
Programming
Details
be checked whenever the DVD
can
Recorder is turned
on.
Press TIMER REC twice.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
timer
a
recording.
RECODING
Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
Prog.
Date
Start Time
Length
Mode
PDC
Check
5
10/4 Sa
19:20
30M
LQ
Off
Rec. OK
5
10/6 Sa
19:20
50M
HQ
Off
Rec. OK
Edit
Canceling
You
can
clear
CLEAR
a
Delete
TIMER REC
Timer
timer
a
Timer Rec
Close
Recording
setting anytime
before the record-
starts.
ing actually
Usev/Vtoselectaprogramyouwanttoeraseon
?
the Timer Recorder List. If you want to
program, press CLEAR.
Timer
Stopping
a
After
recording
a
timer
in
Recording
has
erase
started, you
the
Progress
can
still cancel
the program.
?
Press POWER.
Timer
Even
Recording Troubleshooting
though
the timer is set, the recorder will not
record when:
?
There is
?
A non-recordable disc is loaded.
?
Disc Protect is set to ON in the
no
disc loaded.
?
?
page 25).
Power is turned
Setup
menu
(see
There
are
You cannot enter
?
A
?
The time
?
on.
already
a
99 titles recorded
on
the disc.
timer program when:
is
recording
already underway.
you're trying to set has already passed.
There are already 7 timer programs set.
If two
?
?
or more timer programs overlap:
The earlier program takes priority.
When the earlier program finishes, the later program
starts.
?
If two programs are set to start at exactly the
time, the program entered first takes priority.
If the disc is
damaged,
successfully.
In this
the
shows "Rec.
OK", it may
recording may
though the
case even
not
same
complete
Check field
not be.
39
Recording from
an
External
Recording from
External
You
external
can
record from
camcorder
external
1
or
an
VCR, connected
Input
Components
component, such
as a
to any of the recorder's
You
can
record from
the DV IN
jack
on
a
Digital Camcorder
a
digital camcorder connected to
panel of this recorder. Using
the front
the recorder's remote, you
corder and this recorder.
inputs.
Make
Recording from
that the
sure
component you
record from is connected
properly
want to
Before
to the DVD
DV IN
can
control both the
recording, make sure that the
jack is set up (see page 25).
audio
cam-
input
for the
Recorder. See page 16.
2
Press AV
repeatedly
to select the external
input
ips
to record from.
?
Tuner: Built-in tuner
?
AV1: EURO AV1 AUDIO VIDEO mounted
?
AV2: EURO A/V2 DECODER mounted
?
AV3: AUDIO AV IN 3 / VIDEO IN 3 mounted
on
on
back
back
on
panel
panel
back
?
The
?
Some camcorders cannot be controlled
?
?
(VIDEO, AUDIO (L/R),
mounted on front panel
DV: DV IN mounted on front panel
Load
a
If you connect
cable,
AV4: INPUT 4
S-VIDEO
IN)
3
4 pressing
Select the
recording
REC MODE
5 Recording
(z)
mode
by
repeatedly. (HQ, SQ, LQ)
(The
You can't control this unit
as
necessary
REC indicator
lights
1
2
Make
(x)
or
6
a
on
Press STOP
fixed
length
to
of
time,
see
Instant Timer
stop recording.
3
4
from
a
one.
component
a
DV
digital camcorder is connected
panel DV IN jack. See page 16.
your
input
choose between Audio 1
DV
is
as
you
require.
(original audio)
and
of
information.
Press AV
repeatedly
DV appears in the
Find the
to select the DV
display
window and
on
input.
the TV
place on the camcorder tape
recording to start from.
screen.
that you
want to the
For best results, pause
you want to record.
?
playback
at the
point
from which
on your camcorder, you can use this
recorder's remote to control the camcorder using the
Depending
STOP, PLAY and PAUSE functions.
details.
5
Press REC
?
?
?
?
(z)
no
is
once
to start
recording.
automatically stopped if the recorder
signal.
You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot control the camcorder from this remote control during
recording.
In Video mode, the final frame of the recording
may remain displayed on screen for a while after
recording stops.
For timer recording to work properly on this
recorder, the digital camcorder must also be
switched on and in operating.
Recording
detects
40
DV
(overdubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 25 for
more
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
more
can
the
the
ote
7 for
a
Audio 2
in the
page 37.
(x)
remotely
jack.
Check that the DV audio
You
disc is full.
Recording
sure
to the front
?
continues until you press STOP
To record for
using
You can't record date and time information from
display window.)
Recording
second DVD Recorder
cassette.
once.
will start.
a
you cannot control the second DVD from this
connected to the DV IN
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality
Press REC
?
?
recordable disc.
this
using
recorder's remote.
panel
?
must be DVC-SD format.
signal
source
Recording from
External
an
Input (Continued)
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to this recorder using a single
DV cable for input and output of audio, video, data and
control signals.
You may see the following messages appear
screen when using the DV IN jack.
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
as
IEEE 1394-1995.
trademarks.
logo
only compatible with DV-format (DVCSD) camcorders. Digital satellite tuners and Digital
VHS video recorders are not compatible.
are
You cannot connect
?
You cannot control this recorder from external
a
more
than
one
DV camcorder at
jack (including
equiptwo
It
recorders).
may not always
possible to control the connectjack.
can usually record audio as stereo
Digital
camcorders
or
cam-
Too many devices connected
The DV jack on this recorder supports connection to
just
camcorder.
one
Check the
There is
no
tape
cassette loaded into the connected
equip-
Uncontrollable device
This recorder cannot control the camcorder.
twin stereo tracks of 12-bit/32kHz.
16-bit/48kHz,
or
This recorder
can
only
record
Set DV Rec Audio to Audio 1
(see page 25).
Audio input to the DV IN
jack
one
or
stereo audio track.
Audio 2
as
should be 32
or
Picture disturbance
on
the
recording
Updating
Information
Camcorder is
required
48kHz
updating
may
occur
information for DV.
Camera mode
Camcorder is set to
(not 44.1kHz).
camera
mode.
if the
source
Troubleshooting
nected.
jack,
component pauses playback or plays an
unrecorded section of tape, or if the power fails in the
source component, or the DV cable becomes discon?
properly,
corder is switched off.
be
ed camcorder via the DV IN
?
the
Not connected to camcorder
The camcorder is not connected
ment.
DVD
?
your TV
time to this recorder.
ment connected via the DV IN
?
on
This recorder is
?
?
Messages
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
If you can't get a picture and/or audio
check the bullet points:
?
Make
?
Try switching
2
back
?
sure
the DV cable is
through
the DV IN
properly connected.
equipment then
off the connected
switch
on.
Try switching
the audio
input.
ote
Depending
on
the connected
be able to control it
using
camcorder, you may not
the remote control supplied
with this recorder.
41
RECODING
VR Mode:
Original
and
Playlist Editing
Edits you make to the Original content changes the
actual content of the disc. For example, if you delete
title
a
chapter from the Original content (Title or
Chapter), that title or chapter is deleted from the disc,
freeing up extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example, when
you delete a title from the Playlist, you are just telling
the recorder not to play that title; nothing is actually
Adding Chapter
or
deleted from the disc.
Chapter
You
put
title
Once the
Search
feature,
in the
chapters
original
content contain
Playlist
behave
are
exactly
and
editing using
tions, the
as
on a
sections of
the
delete, combine and
or
move
Playlist (Chapter)
chapter
markers in both the
ote
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 25).
1
2
Play
the title
(Original
or
Playlist).
At the
point you want to start
press CHP ADD.
A
chapter
?
You
can
a new
chapter,
marker icon appears on the TV screen.
also put chapter markers in during recording.
Delete, Add and Move func-
start and end frames may not be
set in the start and end point display.
?
as
contents.
Playlist
Caution
When
well
one or more
chapters
Original or
Playlist titles. From the Original and Playlist menu you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
DVD-Video disc do. Parts
?
as
Original (Chapter)
insert up to 999
can
Original
VR
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters
a
menu.
Titles, Chapters and Parts
in the
chapter marker anywhere in a Playlist or
during recording or playback.
chapter is marked, you can use the Chapter
can
Original
You
Titles in the disc's
VR
Markers
exactly
as
During Playlist playback, you may notice a momentary
pause between edits. This is not a malfunction.
Changing Title
or
Chapter Thumbnails
Thumbnail
VR
Each title and
chapter displayed in the Original or
represented by a thumbnail picture
from the start of that title or chapter.
prefer, select a different still picture from within
Playlist
taken
If you
title.
1
menu
Play
is
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
a
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
ip
You
can also change the thumbnail picture of the title on
Original (Chapter) or Playlist (Chapter) menu. Select
a chapter on the Original (Chapter) or Playlist (Chapter)
menu then press THUMBNAIL. The thumbnail picture of
the title that includes the chapter is changed.
the
42
VR Mode:
Using
the
and
Original
Original (Title)
Playlist Editing (Continued)
VR
menu
Using
The
Original (Title) is where you build and edit your
Playlist, and where you can delete titles and make other
changes to the Original content of the disc. You can also
play individual titles directly from the Original (Title)
menu.
The recorder must be
in order to edit
stopped
using
1
2
1
Original (Title)
?
repeatedly
To exit the
RETURN
display
the
display
are more
Original (Title)
(O).
the
Press MENU/LIST
(Title)
to
repeatedly
VR
menu
display Original
menu.
Use vVbBto choose the title you want to
Original (Chapter) menu then press
view
Original (Title) options appears
the Original (Title) menu.
Use v / V to select
3 options
menu.
Use the v / V buttons to
next page if there
?
to
Original (Chapter)
ENTER.
the
Original (Title).
Press MENU/LIST
the
previous/
menu, press
from
'Chapter'
Original (Title)
then press ENTER.
Original (Chapter)
than 6 titles.
the left side of
on
menu
Original
appears
on
the TV
screen.
TITLE 1
7/12 Su
-Chapter
30M56S
PR-01
1/9
1/12
Original
-Title
DVD-RW
TITLE 1
HQ
1H 5M
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
Free
Select
TITLE 4
13/12
Select
2
3
To view
TITLE 5
0:08:00
DISPLAY
16/12
Info
0:10:00
LIST
19/12
the left side of
Use v / V to select
then press ENTER
option
playback
the select-
ed title.
Use v / V to select
Edit
Playlist
Delete
menu
left
Delete
?
?
(page
?
Undo
?
Redo
one.
chap-
(page 48)
options.
chapter.
Delete: Deletes the
Undo: Undoes the last edit.
(page 47)
Redo
?
a
this
(page 46)
Undo
options.
Delete Parts: Deletes
on
Original (Title)
chapter. (refer to
page)
Edit: Selects Edit
(page 47)
of the Title.
of the
of the
ters into
46)
Delete Part
playback
chapter.
Combine: Combines two
Title Name: Edits the title
Delete: Deletes the title.
then press ENTER
Title: Moves to
Combine
Playlist
?
the left side
Starts
selected
Edit
Edit: Selects Edit
option
Play:
Play
Chapter:
Original
(Chapter) menu of the title.
(refer to right on this page)
name.
an
on
to confirm.
Moves
Title Name
Redo: Redoes the undo
action.
part
(page 47)
Adds the
(page 46)
Playlist:
chapter
Playlist. (page 45)
Undo: Undoes the last edit.
to the
(page 47)
?
Redo: Redoes the undo
action.
(page 47)
Playlist: Adds the
Playlist. (page 45)
Press RETURN
4 (Title)
5
Title
to confirm.
Start
select the
ENTER.
Original (Chapter) options appears
of the Original (Chapter) menu.
select the title
on
Chapter
Close
Playlist
want then
Original (Title) options appears
the Original (Title) display.
Play
LIST
To view
Close
Original (Title) options,
Play:
Info
Original (Chapter) options,
4 chapter you
press
0:15:00
Playlist
you want then press ENTER.
an
DISPLAY
TITLE 6
(O) repeatedly
Press RETURN
6 (Chapter)
(O) repeatedly
to exit
Original
menu.
title to the
to exit
Original
menu.
ip
Press DISPLAY to
display
more
detailed title information
for selected title.
43
EDITNG
VR Mode:
Using
1
the
Playlist (Title)
repeatedly
Playlist
to
display
the
display
are more
Playlist (Title),
the
previous/
than 6 titles.
the
Press MENU/LIST
press RETURN
(O).
Playlist (Title) options
Original (Title) menu.
Use v / V to select
1H 5M
7/12
TITLE 2
0:16:00
3 options
9/12
TITLE 3
0:35:00
10/12
Playlist (Chapter)
0:30:00
TITLE 5
0:08:00
Select
DISPLAY
16/12
Info
Playlist (Title)
appears
on
the TV
screen.
30M56S
TITLE 6
0:10:00
LIST
menu
TITLE 1
7/12 Su
-Chapter
13/12
from
'Chapter'
then press ENTER.
Playlist
TITLE 4
19/12
0:15:00
1/9
Close
Original
Playlist (Title) options,
select the title
you want then press ENTER.
Playlist (Title) options
Playlist (Title) menu.
3
the left side of the
on
appears
1/12
Free
To view
the
display
Use vVbBto choose the title you want to
menu then press ENTER.
-Title
TITLE 1
2
to
1 Playlist (Title) repeatedly
2
Playlist (Chapter)
VR
Menu
Playlist (Chapter)
view
DVD-RW
HQ
Using
menu.
Use the v / V buttons to
To exit the
VR
menu.
next page if there
?
Playlist Editing (Continued)
Menu
Playlist (Title)
Press MENU/LIST
?
and
Original
Use v / V to select
on
appears
an
option
the left side of the
then press ENTER
Select
Info
DISPLAY
LIST
Close
Original
To view
Playlist (Chapter) options,
4 chapter you
press
want then
to confirm.
Start
Play:
Play
playback
Playlist (Chapter) options appears
Playlist (Chapter) menu.
the select-
Chapter: Moves Playlist
(Chapter) menu of the title.
(refer to right on this page)
Title Name
Delete
Title Name: Edits the title
name.
Delete Part
(page 47)
5
Use v / V to select
Move
Delete Part: Deletes
a
part of
(page 46)
option
then press ENTER
Starts
selected
Title
Playlist (Title)
the Title.
an
Play:
Play
Delete: Deletes the title from the
(page 46)
playback
chapter.
Press RETURN
(O) repeatedly
to exit
menu
left
on
Playlist (Title)
chapter. (refer to
page)
of the
this
Combine: Combines two
Delete
ters into
one.
Playlist
chapter
Playlist (Chapter) menu.
(page 46)
display
from
the
detailed title information
for selected title.
Press RETURN
6 (Chapter)
44
a
Delete: Deletes the
ip
more
chap-
(page 48)
chapter of
Playlist (Chapter) to a position
on the Playlist (Chapter) menu.
(page 48)
menu.
Press DISPLAY to
of the
Title: Moves to
Move: Moves
4 (Title)
the left side of
to confirm.
Combine
menu.
on
the
ed title.
Chapter
select the
ENTER.
(O) repeatedly
menu.
to exit
Playlist
VR Mode:
Making
New
a
and
Original
Playlist Editing (Continued)
VR
Playlist
Use this function to add
an Original title or chapter to
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting an Original or Playlist title/chapter on page
46).
the
Adding
Playlist
You
can
Additional
add
Original title or chapter to
if it is already registered.
an
---
The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you
add
are
You
chapter markers to the Original later, these
automatically copied over into the Playlist title.
not
chapters to one disc If
chapter of a title, use the Adding
title/chapter to the Playlist on this page.
2
1
can
add up to 999
you
.
a
Press MENU/LIST
repeatedly
to
only
title
add to
repeatedly
to
display Original
menu.
2
a
Choose
Original
chapter
Playlist, then press ENTER.
Original menu options appears on the
or
to
Play
Play
Title
Title Name
Combine
page 43.
Edit
Edit
Playlist
Playlist
Choose
to
title
a
or
chapter
on
the
Original
menu
put into the Playlist, then press ENTER.
Original (Title
Chapter) options
Original menu.
or
left side of the
appears
on
Original (Title)
the
Original (Chapter)
Use v / V to select
3 options
'Playlist'
Play
Chapter
Title
Title Name
Combine
New
Edit
Edit
TITLE 1
Playlist
Playlist
Original
menu
Select
Playlist.
Playlist
TITLE 2
Original (Chapter)
Use v / V to select
3 options
from
then press ENTER.
Play
Original (Title)
left side of
screen.
Chapter
menu.
put
into
the
the
display Original
title
an
If you want to display the Original (Chapter) menu,
refer to "Using the Original (Chapter) menu" on
(Title)
a
even
Press MENU/LIST
(Title)
to the
If you want to show the Original (Chapter) menu,
refer to "Using the Original (Chapter)" on page 43.
more
want to add
1
Playlist
Title/Chapters
VR
'Playlist'
from
Original
then press ENTER.
4
Choose
a
Playlist (Title)
tered to insert
a
title
or
that is already regischapter, then press
ENTER.
Select
The title
Playlist.
or
chapter
appears in the
updated Playlist
menu.
New
4
Playlist
Repeat steps 1-4 to
on the Playlist.
5
ter
6
back to the
Press RETURN
add additional title
or
(O) to exit, or MENU/LIST
Original (Title) menu.
chapto go
Select 'New
The
new
chapters
Playlist' then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist
TITLE 1
7/12 Su
-Chapter
30M56S
1/9
Select
DISPLAY
Info
LIST
Original
Close
45
EDITNG
VR Mode:
Deleting an Original
Title/Chapter VR
When you
and
Original
title
Playlist Editing (Continued)
Playlist
or
Deleting
You
from the
chapter
Playlist
only remove it from the Playlist; the
title/chapter remains in the Original menu.
erase a
or
1
menu, you
If you choose to delete
title
a
or
chapter
from the
Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted
from the Original are also removed from the Playlist.
2
not want in the title.
Press MENU/LIST
(Title)
or
repeatedly to display Original
Playlist (Title) menu.
Use vVbBto choose a title you want to
delete then press ENTER.
The options appears on the left side of the menu.
3
Select 'Delete Part' from the
options
on
the
menu.
e.g., If you select "Delete Part"
chapters
that
are
on
Original (Title)
Delete
less
Press MENU/LIST
repeatedly to display Original
(Title)
Playlist (Title) menu.
If you want to display the Original (Chapter) or
Playlist (Chapter) menu, refer to "Using Original
(Chapter) menu" or "Using Playlist (Chapter) menu"
or
Use vVbBto choose
a
chapter
or
title you
want to delete then press ENTER.
on
appears
Select 'Delete'
the left side of the
option
the
on
options
Delete Part
Chapter
Undo
Title Name
Redo
Playlist
4
Press ENTER.
Title Edit
'Start' icon is
Title Edit
-Delete Part
on
menu
appears
on
the TV
highlighted.
the
menu.
e.g., If you select "Delete"
(Delete Part)
screen.
screen.
on
Play
Edit
pages 43-44.
Options
3
part which you do
2
ote
on
a
menu.
It may not be possible to delete
than 5 seconds long.
1
delete
can
VR
Part
a
Original (Title)
TITLE 1
20/8 00:35:42
menu.
Delete
Start
Play
Delete Part
End
Done
Chapter
Undo
Title Name
Redo
Edit
Playlist
4
deleting
6
Press ENTER at the
7
b / B to select 'Yes' then press ENTER.
The selected
chapter or title is deleted.
After pressing ENTER, the new, updated
displayed.
2
6
Repeat steps
7
Press RETURN
-
menu
is
8
5 to continue to delete from the
menu.
(O) repeatedly
to exit the
menu.
Move Point
Starts
9
playback
pause step, search and
use
starting point.
starting point
of the section
you want to delete.
'End' icon is highlighted.
part is indicated
Use pause
the
on
the
Progress
Bar.
step, search and slow-motion
to find
ending point.
Press ENTER at the
ending point
of the section
you want to delete.
You can cancel the selected point, use v / V to
select 'Cancel' icon then press ENTER.
If you finish to
edit, select 'Done' icon then
press ENTER.
The confirm message for
10Use
deleting
will appear.
b / B to select 'Yes' then press ENTER.
The selected
part is deleted from the title and
Original (Title)
46
and
slow-motion to find the
The
will appear.
Select
5
Press ENTER to confirm.
The confirm message for
5Use
0:00:00.00
Cancel
or
Playlist (Title)
menu
appears.
VR Mode:
Original
Undoing/Redoing
and
Playlist Editing (Continued)
VR
the Last Edit
If you make a mistake while editing, you can undo it.
There are three levels of undo (in other words, you can
undo the last three edits you
1
You
Original (Title)
or
1
Original
then press ENTER.
It doesn't matter whether you are currently in the
can
VR
Title
a
Playlist
titles
be up to 32 characters
and
long.
Original
can name
Names
made).
Select 'Undo' from the
(Chapter)
Naming
independently.
Press MENU/LIST
(Title)
or
repeatedly to display Original
Playlist (Title) menu.
EDITNG
menu
Original (Title)
or
Original (Chapter)
menu; the last
2
Options
edit is undone.
e.g., If you select "Undo"
on
Original (Title)
Use vVbBto choose the title you want to
name then press ENTER.
menu.
Delete
Play
Delete Part
Chapter
Undo
Title Name
Redo
on
appears
the left side of the
Play
Play
Chapter
Chapter
Title Name
Title Name
Edit
Delete
Playlist
Delete Part
Original (Title)
Edit
3
Playlist
menu.
Playlist (Title)
Use v/V to select 'Title Name'
option
then press
ENTER.
Keyboard
otes
menu
appears.
TITLE 1
You can't undo
recording.
anything after ejecting the disc from
or switching the recorder into standby.
undo edits after exiting the menu screen.
a
Alphabet Capital
You can't undo
the recorder
You
can
still
123456789
0
ABCDEFGH
J
I
KLMNOPQRST
UVWXYZ
ip
You
can
redo the last undo action
using 'Redo'
Original (Title) or
options then press ENTER.
OK
Cancel
Space
Delete
Select 'Redo' from the
option.
Original (Chapter)
menu
4
Enter
a name
for the title. Use vVbBto select
character then press ENTER to confirm your
selection. Refer step 2 as shown on page 19
a
(Station Rename).
5
6
Choose OK then press ENTER to fix the
and return to the
Press RETURN
previous
name
menu screen.
(O) repeatedly
to exit the
menu.
otes
?
?
Names
can be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
47
VR Mode:
and
Original
Combining Two Chapters
Playlist Editing (Continued)
Into One
Moving
VR
Use this function to combine two
Original chapters
into
adjacent Playlist
Use this function to re-arrange the playing order of
Playlist chapters on the Playlist (Title) menu.
or
one.
1
ote
This function is not available if there is
only
one
VR
Playlist Chapter
a
chapter
Press MENU/LIST
repeatedly
to
(Title)
To display the Playlist (Chapter)
"Using the Playlist (Chapter)" on
display Playlist
menu.
menu, refer to
page 44.
within the title.
1
ote
Press MENU/LIST
repeatedly to display Original
(Title)
Playlist (Title) menu.
If you want to display the Original (Chapter) or
Playlist (Chapter) menu, refer to "Using the Original
(Chapter)" and "Using the Playlist (Chapter)" on
or
This function is not available if there is
Playlist
TITLE 1
7/12 Su
-Chapter
only
one
chapter.
30M56S
1/9
page 43-44.
2 First,
select the second
chapter
of the two
chap-
ters you want to combine then press ENTER
the
Original (Chapter)
or
on
playlist (Chapter)
Select
menu.
Playlist (Chapter)
appears
3
on
or
Info
screen.
Select
a
chapter
from the
Use v / V to select 'Combine'.
2
The combine indicator appears between the two
chapters you want to combine.
3 Playlist (Chapter) options
Play
Play
Title
Title
Combine
Combine
Edit
Move
Playlist
Delete
Original (Chapter)
pressing ENTER,
played.
appears
on
the left side of
menu.
Use v / V to select 'Move' from
4 options
Playlist
then press ENTER.
Play
Title
Combine
Move
Playlist (Chapter)
the
Playlist (Chapter)
Press ENTER.
Delete
updated
menu
is dis-
5
Use vVbBto choose the
the
place
you want to
to then press ENTER.
chapter
pressing ENTER, updated
move
After
48
Close
Original
menu.
Press ENTER to confirm.
After
LIST
Original (Chapter) options
the left side of the
the
4
DISPLAY
menu
is
displayed.
Video Mode:
Original Editing
Video
the Title List
Using
From the Title List
display
Deleting
play,
can
you
name
and
delete titles.
Once
a
Video mode disc is
changes its
titles to play.
screen
select
1
Before
on
can
do is
If you delete a title from
disappear from the Title
?
When
the Title List.
display
Free
Date
12/11
0:20:15
TITLE 2
14/11
0:43:30
TITLE 3
18/11
0:33:00
TITLE 4
20/11
0:10:00
TITLE 5
23/11
0:15:00
TITLE 6
25/11
0:17:00
Select
time will not increase.
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
1
2
Close
Press MENU/LIST to
Title List
List
3
options
display.
a
title then press ENTER.
on the left side of the Title
appears
an
option
3
display Title
Use v / V to select 'Delete' then press ENTER to
confirm.
pressing ENTER,
displayed.
then press ENTER
List.
the new,
updated
title list is
to confirm.
Play
Title Name
Delete
Play:
Start
playback
ed title.
Title Name
Title Name: Edits the title
Delete
name.
(page 47)
Delete: Deletes the title from the
Press RETURN
Play
the select-
Title List.
4
the disc.
menu.
After
Use v / V to select
on
Use vVbBto choose a title you want to
delete then press ENTER.
Title List options appears on the left side of the Title
List
2
DVD-R disc, the title will
List, but the available record-
Duration
TITLE 1
Use v / V to choose
delete titles recorded
a
increase if it is the last title
1/12
Title
1H 5M
can
Caution
?
Title List
HQ
finalized, you
the disc.
ing
DVD-RW
disc is
a
Video
finalized, the Title List
appearance and all you
Press MENU/LIST to
Title
a
(O) repeatedly
4 Repeat steps
2-3 to delete additional titles from
the Title List.
to exit Title List.
5
Press RETURN
Title List
(O) repeatedly
display.
If the disc has
You should
already
see a screen
like the
to
remove
the
been finalized
one
below.
Indicates total and current page number
Disc
name
Title list
DVD-RW
?
1/2
1
TITLE 1
12/11
0:30:21
2
TITLE 2
14/11
0:20:08
3
TITLE 3
18/11
1:10:03
4
TITLE 4
20/11 0:43:21
5
TITLE 5
23/11 0:15:21
6
TITLE 6
25/11 1:13:21
PAGE
UP
PAGE
DOWN
EXIT
Also you can exit the Title List
MENU/LIST.
Moves to the next
previous
or
page
Exits the Title List
display using
screen.
TITLE
or
49
EDITNG
Language Code
Enter the
(See
appropriate
21).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
50
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
24).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
Afghanistan
ET
Spain
Ethiopia
LI
AF
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
AN
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
HT
Haiti
NI
Nigeria
Nicaragua
TW
Canada
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
Cameroon
CN
Outlying
Islands
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
IQ
Iraq
PA
Panama
UZ
Uzbekistan
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
Republic
IO
Principe
Territories
CA
CF
Mayen
Islands
Anguilla
Guinea
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
51
REF NC
Controlling Your TV
You
can
control the sound
with the
level, input
power switch of your LG TV with the
source, and
supplied
can
control your TV
using
other TVs with the remote
Controlling
remote.
You
You
Remote
Supplied
can
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
the buttons below.
code.
ROGRAM
1.
CAR
ROGVOM
V
If
Buttons
MN/
NR
You
POWER
Turn the TV
PROG. +/--
Scans up or down through
memorized channels.
can
Adjust
AV
Switch the TV's
off.
input
source
input
52
code number is
listed, try entering
time until you find the
one
that works with
Manufacturer
Code Number
LG / GoldStar
1
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
Depending
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
being connected, you may not
using some of the buttons.
a new
code
number, the code number
previously
entered will be erased.
When you
replace
the batteries of the remote, the
code number you have set may be reset to the default
setting. Set the appropriate code number again.
otes
the unit
one
a
If you enter
sources.
on
at
manufacturer code.
the volume of the TV.
between the TV and other
able to control your TV
than
one
otes
on or
VOLUME +/--
Depending
more
your TV.
S
By pressing
below).
Release TV POWER button.
them
S
the table
(see
Code numbers of controllable TVs
ZOOM
TV Control
holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV
2.
OWR
While
be
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
contacting
Cause
Symptom
Solution
No power.
The power cord is disconnected.
No
TV/DVD mode for the recorder is set to
Press TV/DVD
TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
picture.
Plug the power
securely.
cord into the wall outlet
the remote control
on
window.
The TV is not set to receive DVD
Select the
Recorder
on
signal output.
the TV
appropriate video input mode
the picture from the DVD
so
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
audio cable is not set to receive DVD
Recorder
signal output.
The audio cables
are
not connected
on
the TV.
input mode on the
you can listen to the
sound from the DVD Recorder.
audio receiver
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
on
the
connected with
equipment
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
disc.
a
cator in the
playback.
An
unplayable
disc is inserted.
Insert
(Check that the disc
display window is lit.)
disc.
playable
a
(Check
indi-
the disc
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
picture from the
input is distort-
external
The video
Cancel the
from the external
signal
com-
ponent is copy-protected.
Some channels
are
Those channels
are
not stored in the
recorder.
when
Aerial
Camcorder
Camcorder is off.
image
is not
image
via
or
cables
are
loose.
Camcorder
input
or
or
change
Connect the
component directly
to your
Restore channels. See
"Program
Edit"
page 18-19.
Tighten
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
shown.
A/V
function
Rating
level.
You cannot connect via this recorder.
on
picture or sound of
broadcasting channel is
weak or missing.
The
rating
TV.
ed
skipped over
usingv/V.
tray correctly
Clean the disc.
the
The
the disc
on
guide.
DV IN to
DVD Recorder INPUT SELECT is
Use AV to select
incorrect.
AV2, DV, etc.)
input
channel
(AV1,
DVD Recorder is not
shown
on
TV
screen.
53
REF NC
Troubleshooting (Continued)
Cause
Symptom
Can't
The disc
play a disc
using this
recorded
recorder
on
Some
another
was
Solution
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
(page 26)
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
be RW
player must
play it.
compati-
ble in order to
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
successfully.
remaining
blank space
The
source
copy
are
you
to record is
trying
setting
the
channel is tuned
When
recording
is not
the
recording channel,
on
to
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
recording
possible.
You cannot record the
source.
Select the channel
the recorder's
protected.
When
Timer
the disc
on
is insufficient.
tuner.
Use
disc,
protected
Clock in DVD Recorder is not set to
cor-
rect time.
on
built-in TV tuner.
a
once
VR mode formatted disc for copy-
material.
Set clock to correct time. See "Auto
Clock Set"
or
"Manual Clock Set"
on
page 20.
Timer has been
Reprogram Timer. See "Timer
Recording" on page 38.
programmed
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
present.
light does
programming timer.
not
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 37.
The remote control
The remote control is not
does not work
remote
properly.
sensor
pointed
at the
of the DVD Recorder.
Point the remote control at the remote
sensor
The remote control is too far from the
of the DVD Recorder.
Operate
the remote control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
remote control and the DVD Recorder.
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
When the DVD Recorder is moved from
to
a warm
In locations where moisture condensation may
can occur:
a
cold
place
?
Keep
the DVD Recorder
plugged
outlet with POWER On. This will
place.
into
an
occur:
AC power
conden-
help prevent
sation.
?
Under
54
extremely
humid conditions.
?
When condensation has
occurred, wait
for the DVD Recorder to
dry
before
a
using
few hours
it.
Specifications
General
Power
AC
Power
30W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
430 X 76 X 383
5.5
mm
(w
x
h
x
d)
kg
5˚C to 35˚C
REF NC
5 % to 90 %
PAL I colour
system
Recording
format
PAL
Recording
format
DVD
system
Recording
Recordable discs
VideoRecording,
DVD-VIDEO
DVD-ReRecordable, DVD-Recordable
Recordable time
Approx.
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
1 hour
(HQ mode),
2 hours
(SQ mode),
4 hours
(LQ mode)
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
to 20 kHz
Inputs
AERIAL IN
Aerial
input, 75 ohms
Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBmmorethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (i.LINK/IEEE 1394 standard)
VIDEO IN
1.0
AUDIOIN
DV IN
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
output (optical audio)
Audio output (analog audio)
Audio
x
1
/ SCART
Accessory:
Scartcable.............................1
Videocable.....................1
Audiocable(L,R)........................1
RFCoaxialCable................1
BlankDVD-Rdisc........................2
Remotecontrol..................1
Batteries...............................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
symbol
are
trade-
Laboratories.
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
55
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
this Guarantee.
replaced
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D.
We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee does
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RS0059F
Download PDF