LG | DVD6353 | LG DVD6353 Owner’s Manual

DS7511E3S_HA4ULL_LGEUK
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DVD6353
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
This
product is manufactured to
comply with the radio interference
requirements of EEC DIRECTIVE
CAUTION
89/336/EEC, 93/68/EEC and
Warning:
electric
shock, do
cover or
are no
remove
Warning:
electric
product
parts inside.
qualified
service
shock, do
to
dripping
or
not expose this
or
the
find the serial number
can
splashing
place
the back of the unit.
on
to this unit and not available to
unique
others. You should record
requested
and retain this
permanent record of your
guide
as a
information here
purchase.
Model No.
______________________________
moisture. Do not
filled with water such
on
SERIAL NUMBER:
You
This number is
To reduce the risk of fire
water, rain,
objects
to
the
product. There
user-serviceable
servicing
personnel.
vases,
not
back of this
Refer
or
73/23/EEC.
To reduce the risk of
as
product.
Serial No.
______________________________
Date of Purchase_________________________
POWER: This unit
operates
mains
on a
supply
of
110-240V,
50/60Hz.
WIRING: This unit is
Warning: This digital video disc
player employs a laser system. Use
of controls, adjustments, or the
performance of procedures other
than those specified herein may
result in hazardous radiation
amp mains
always
Never
supplied
use a
player
plug removed from the mains lead of
destroyed. A mains plug with bared
prevent
beam, do
exposure to laser
a
mains socket.
Do not connect either wire to the earth
direct
not open
letter E
or
with the earth
the enclosure. Visible laser radiation
green and yellow.
If any other plug is
when open.
plug,
or
symbol
fitted,
use a
pin,
or
5 amp
Never stare
directly
into
BLUE:
fuse, either in the
NEUTRAL,
following
are
coloured in
codes:
BROWN: LIVE
-
As the colours of the
the laser beam.
wires in the mains lead of this DVD
Caution:
terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
correspond
in
Do not install this
confined space such
case or similar unit.
a
product
as a
book
with
the
marked with the letter N
coloured
or
player may not
marking identifying
the
coloured black. The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L
2
or
at the distribution board.
accordance with the
-
marked with the
coloured green
IMPORTANT: The wires in this mains lead
Warning:
13
approved
must be
wires is hazardous if inserted in
Warning:
BSI 1363
this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of
plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type
fitted. Please refer to the wiring instructions below:
this DVD
To
a
use
WARNING: A mains
exposure.
with
fused at 5 amp. When replacing the fuse
5 amp BS 1362, BSI or ASTA approved type.
plug,
or
coloured red.
SlowMotion........................17
Contents
Random...........................17
Introduction...................4
SymbolusedinthisManual..............4
AbouttheSymbolDisplay............4
Repeat...........................17
RepeatA-B........................17
3DSurround......................17
TimeSearch.......................17
Zoom...........................18
NotesonDiscs........................4
MarkerSearch...................18
HandlingDiscs......................4
StoringDiscs.......................4
CleaningDiscs......................4
TypesofPlayableDiscs.................5
Regionalcode........................5
SpecialDVDFeatures.................18
Checking the contents of DVD discs: Menus .18
TitleMenu........................18
DiscMenu........................18
Disc-relatedterms.....................6
CameraAngle.....................18
.18
ChangingtheAudioLanguage
FrontPanel...........................7
Subtitles.........................18
.
.
.
.
.
.
.
DisplayWindow........................7
Playing
RemoteControl........................8
Audio CD and MP3 / WMA Disc Features
an
Audio CD
or
MP3/WMA Disc
.
.
.
.
.
.
.19
.20
RearPanel............................9
Pause...........................20
RemoteControlOperation..............9
Remote Control Battery Installation
.9
MovingtoanotherTrack.............20
RepeatTrack/All/Off.................20
.
.
.
.
.
.
Search...........................20
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
SettingupthePlayer..................10
DVDPlayerConnections...............10
Video and Audio Connections to Your TV
AudioConnectiontoYourTV
.
.
.
.
.
.
.
.
.
.
Audio Connection to
.
.10
.10
Optional Equipment .11
On-ScreenDisplay....................12
.12
Playback Status/Restrictions
InitialSettings........................13
GeneralOperation...................13
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.......................13
?MenuLanguage...................13
?DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.13
DISPLAY..........................13
?TVAspect.......................13
?DisplayMode.....................13
AUDIO...........................14
?DolbyDigital/DTS/MPEG.
?SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.14
.14
.14
?Vocal...........................14
OTHERS..........................14
?AutoPlay........................14
LOCK(ParentalControl)..............15
?Rating..........................15
.15
?Password(SecurityCode).
?CountryCode.....................15
.
.
.
.
.
.
.
.
.
.
Random..........................20
3DSurround......................20
RepeatA-B.......................20
ViewingaJPEGDisc..................21
SlideShow........................21
MovingtoanotherFile................21
StillPicture.........................21
ProgrammedPlayback................22
.22
RepeatProgrammedTracks
.22
Erasing a Track from Program List
the
List
.22
Erasing
Complete Program
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures...................23
LastSceneMemory..................23
ScreenSaver.......................23
VideoModeSetting..................23
SystemSelect........................23
ControllingtheTV...................23
.23
Setting Remote Control Codes for an LG TV
.
Maintenance and Service
.
.
.
.
.
.
.
.24
HandlingtheUnit...................24
?Whenshippingtheunit..............24
.24
Keeping the exterior surfaces clean
Cleaningtheunit....................24
MaintainingtheUnit.................24
Troubleshooting.....................25
?
.
.
.
.
Reference....................26
Operation....................16
PlayingaDVD.......................16
PlaybackSetup...................16
LanguageCodes.......................26
CountryCodes........................27
Specifications.........................28
GeneralFeatures.....................16
MovingtoanotherTITLE............16
.16
MovingtoanotherCHAPTER
.
.
.
.
.
.
.
.
.
Search............................16
Still Picture and
Frame-by-Frame Playback
.
.
.17
3
Introduction
About the
To
proper use of this product, please
read this owner's manual carefully and retain for
Symbol Display
ensure
future reference.
This manual
information
provides
the
on
"
"
may appear on your TV display during
operation and indicates that the function
explained in this owner's manual is not available
on that specific DVD video disc.
and maintenance of your DVD player.
Should the unit require service, contact an
operation
authorized service location.
Symbol
Notes
Handling
Used in this Manual
Discs
Discs
Do not touch the
the disc
The
lightning flash symbol alerts you to
the presence of dangerous voltage within
the product enclosure that may constitute
a
on
get
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not
the surface. Never stick paper
or
tape
on
the disc.
risk of electric shock.
The exclamation
point alerts you to the
of
presence
important operating and
maintenance / servicing instructions.
Indicates hazards
the unit itself
or
Note: Indicates
operating
Tip:
likely
to
cause
other material
special
harm to
damage.
notes and
Storing Discs
playing, store
After
to direct
features.
Indicates
tips
and hints for
making
the task easier.
the disc in its
case.
Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion. Before
playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
A section whose title has
one
symbols is applicable only to
represented by the symbol.
DVD
of the
following
the disc
DVD-Video Discs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl
4
records.
Types
of
Playable
Discs
Regional
This DVD
code
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
"2" encoded DVD software. This unit
can
Audio CD
or
play only
2
DVD discs labeled "2"
"ALL".
(8cm/12cmdisc)
Notes
In addition, this unit plays DVD -R / DVD ±RW, Kodak
Picture CDs, and CD-R / CD-RW that contains audio
?
?
Notes
?
?
?
side)
of
a
?
use irregularly shaped CDs
(e.g., heart-shaped or octagonal)
since they may result in malfunctions.
DVDs
Some
playback operations
of DVDs
manufacturer, therefore
by
content
some
features may not be
available or other functions may be
playback
added.
Refer to the instructions
supplied
with
each DVD.
Some DVDs made for business
purposes may not be
unit.
played
on
the
assigned
on
a
globe with
clearly
numbers in it
the
cover.
code
or
This number
player's
the disc cannot
play.
IfyoutrytoplayaDVDwitha
region code from your
the
player,
message "Check Regional
Code" appears
Do not
on
is
different
?
plays DVDs according to disc
designed by the software
?
Most DVD discs have
regional
disc.
may be intentionally programmed
software manufacturers. This unit
?
region of the world
region code.
must match your DVD
Do not attach any seal or label to
(the labeled side or the
recorded
Codes
DVD
visible
Depending on the conditions of the
recording equipment or the CD-R/RW
(or DVD -R/ ±RW) disc itself, some
CD-R/RW (or DVD -R/ ±RW) discs
cannot be played on the unit.y
Notes
Regional
one or more
either side
?
Each
a
titles, MP3, WMA, and/or JPEG files.
on
on
the TV
screen.
Some DVD discs may not have a
region code label even though their
playback
Notes
on
is
prohibited by
area
limits.
Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent
copyrighted material without permission. This
product features the copy protection function
developed by Macrovision. Copy protection
signals are recorded on some discs. When
recording and playing the pictures of these discs
picture noise will appear. This product
incorporates copyright protection technology that
is protected by method claims of certain U.S.
patents and other intellectual property rights
owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
5
Title
Disc-related terms
(DVD only)
generally a distinct section of a DVD
disc. For example the main feature could be title
1, a documentary describing how the film was
A title is
DVD-R/DVD±RW
DVD -R
two different standards for
are
recordable DVD drives and discs. This format
allows information to be recorded onto the DVD
disc
only
once.
DVD +RW and DVD -RW
are
two
standards for re-writable media, meaning the
DVD content can be erased and re-recorded.
Single-sided
discs
hold 4.38
can
double-sided discs hold twice
dual
are no
layer single
as
Gigabytes
and
much. There
sided recordable discs.
number
MPEG is
an
international standard for video and
audio
enabling
you to locate it
Chapter (DVD only)
chapter is a segment
A
in
a
film
or one
of
a
interview in
easily.
title such
a
as a scene
series. Each
is
assigned a chapter number, enabling
chapter you want. Depending
disc, chapters may not be recorded.
chapter
you to locate the
on
MPEG
the
Track
compression. Provides for multichannel
surround sound coding such as PCM, Dolby
Digital, DTS and MPEG audio.
A distinct element of audiovisual information,
such as sound track for a specific language
MP3
track number, enabling you to
locate the track you want. DVD discs allow one
MP3 is
a
popular compression format
yields very high
audio files that
digital
quality.
used for
near-CD
WMA
Windows media audio file. A
decoding developed by
type of coding /
Microsoft
Corp.
JPEG
Joint Pictures
Expert Group.
JPEG is
a
compressed file format that allows you to save
images with no limit on the number of colors.
6
made could be title 2, and cast interviews could
assigned a reference
be title 3. Each title is
(DVD), or a
is assigned
musical
piece
audio CD. Each track
a
track of video
(with multiple angles)
tracks of audio.
and several
Front Panel
POWER
Switches the
player
Remote Sensor
ON and OFF.
Point the DVD
remote control here.
Player
Power Indicator
Lights
player
window
Display
green when the DVD
is turned on.
Shows the current status of the
Disc
Insert
a
Introducin
player.
Tray
disc here.
OPEN/CLOSE(Z)
Opens
or
closes the disc
tray.
PLAY(N)
playback.
Starts
Pauses
playback.
Press
repeatedly
for
PAUSE(X)
frame-by-frame playback.
STOP(x)
Stops playback.
Reverse
Go to
previous chapter
Skip/Scan (
/ track
Press and hold for two seconds for fast
Forward
m / .
)
beginning.
to the
or
reverse
search.
Skip/Scan ( >
chapter
Go to the next
/ M
)
/ track.
Press and hold for two seconds for fast forward search.
Display Window
ANGLE active
DVD
TITLE
Indicates current title number
CHP/TRK
DVD inserted
CD Audio CD inserted
Indicates current
Indicates total
MP3 MP3 disc inserted
PROG.
chapter
Programmed playback
playback
player
track number
playing time/elapsed
RANDOM
Indicates current
or
time
active
Random
active
function:
Playback, Pause,
Indicates
etc.
repeat
mode
MP3
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
AB
7
Remote Control
POWER
Switches DVD
OPEN / CLOSE
ON and OFF.
Player
Opens
SOUND / MUTE
-
-
during
playback.
Turns off TV sound.
TV
POWER
operational
OPEN/CLOSE
SOUND/MUTE
operational
Removes the
DISPLAY
RETURN
setup
selects AUX A/V TV
PR./CH
DISPLAY
Accesses On-Screen
-
Selects
-
an
SELECT
display.
bBvV(left/right/up/down)
item in the
menu.
VOL
MENU
SELECT / ENTER
VOL
ENTER
TITLE
PR./CH
PAUSE/STEP
SLOW
volume of TV.
SKIP/SCAN
PLAY
menu on a
SKIP/SCAN
PROGRAM
DVD disc.
PAUSE/STEP(X)?
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
SLOW(t/T)?
playback.
Reverse/ Forward slow
Acknowledges
CLEAR
Displays
?
A-B
RANDOM ZOOM
title menu, if available.
Forward SKIP/SCAN
(
>
)
?PLAY(H)
Starts playback.
Reverse SKIP/SCAN
(
.
Search backward* / go to
beginning of current chapter
track
or
STOP(x)?
Stops playback.
selection.
Search forward* / go to next
chapter or track.
?
AUDIO SUBTITLE ANGLE SETUP
REPEAT
menu
TITLE
STOP
MENU
Accesses
menu, and
channel.
input
TV AV
Selects channel of TV and
changes
mode of
RETURN / TV AV
mode of remote
control to DVD.
Selects the
the remote control to the TV.
DVD
Selects
tray.
This button is not available.
Selects 3D SURROUND
disc
and closes the disc
go to
or
)
or
previous chapter
track.
MARKER SEARCH
*
Press and hold button for
about two seconds.
0-9 number buttons
Selects numbered items in
a menu.
PROGRAM
Places
AUDIO
Selects
an
audio
language (DVD) or
(CD).
audio channel
an
SUBTITLE
Selects
a
subtitle
a
DVD
?
language.
ANGLE
Selects
?
camera
angle
?
if
available
Accesses
or removes
setup
?
?
point during playback.
Removes
?
8
a
track number
on
?
menu.
the
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat
sequence.
RANDOM
Plays
?
SEARCH
MARKER SEARCH
the program
menu.
MARKER
Displays
on
program list or a mark on the
MARKER SEARCH menu.
?
Marks any
track
CLEAR
?
SETUP
a
list.
tracks in random order.
ZOOM
Enlarges
video
image.
Rear Panel
COAXIAL
Introducin
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
Connect to
stereo
(Left / Right)
an amplifier, receiver,
TO TV
AUDIO OUT
(SCART)
Connect to
or
a
Jack
TV with SCART
jack.
system.
AC Power Cord
VIDEO OUT
Connect to
TV with video
a
Do not touch the inner
rear
panel.
inputs.
into the power
pins of the jacks on the
discharge may cause
to the unit.
Caution:
Operation
Point the remote control at the remote
?
sensor
and press the buttons.
Do not mix old and
and
never
Battery
Detach the
installation
battery
cover on
the
batteries
(size AAA)
aligned correctly.
with
and
batteries
as
types of
standard, alkaline,
etc.
rear
the remote control, and insert two
AAA AAA
new
mix different
batteries such
Remote Ccontrol
source.
Electrostatic
permanent damage
Remote Control
Plug
of
?
Before
using
the remote control,
press the DVD or TV button to select
the device to be operated.
9
Installation and
Setting
The
up the
picture
Setup
Video and Audio Connections to Your TV
Player
and sound of
a
nearby TV, VCR,
or
radio may be distorted during playback. If this
occurs, position the player away from the TV,
VCR,
or
radio,
or
turn off the unit after
removing
Make
sure
the DVD
player
to the TV and not to
image
a
is connected
directly
VCR, otherwise the DVD
could be distorted
by
the copy
protection
system.
the disc.
Video: Connect the VIDEO OUT
DVD
using
Player Connections
DVD
player
on your TV and other equipment
various ways you can connect the
Please refer to the manuals of your TV,
to the video in
the video cable
jack
on
on
the
the TV
(V).
Depending
SCART: Connect the TO TV SCART
jack
there
the DVD
SCART
are
player.
stereo
system
or
other devices
as
jack
on
player
the TV
to the
using
Rear of TV
SCART INPUT
Rear of DVD
player
T
right
AUDIO OUT
jacks
right IN
of
Player
to the audio left and
jacks
the TV
(A) using the audio cables. Do
Player's AUDIO OUT jack
jack (record deck) of your audio
on
to the
phono
system.
AV
(T).
the DVD
not connect the DVD
VIDEO
INPUT
the SCART cable
on
Audio Connection to Your TV:
Connect the left and
AUDIO INPUT
corresponding
necessary for
additional connection information.
10
jack
in
Audio Connection to
Optional
Equipment
Connect the DVD
equipment
player
for audio
Rear of DVD
to your
output.
optional
Amplifier equipped with 2-channel analog
stereo or Dolby Pro Logic ll / Pro Logic:
Connect the left and right AUDIO OUT jacks on
the DVD player to the audio left and right IN
jacks on your amplifier, receiver, or stereo
system, using the audio cables (A).
Amplifier equipped with 2-channel digital
stereo (PCM) or audio / video receiver
equipped with a multi-channel decoder
(Dolby DigitalTM, MPEG 2, or DTS): Connect
one of the DVD Player's DIGITAL AUDIO OUT
jacks (COAXIAL X) to the corresponding in jack
on your amplifier. Use an optional digital
(coaxial X) audio cable.
player
Digital Multi-channel sound
digital multi-channel connection provides the
best sound quality. For this you need a multi-
A
X
A
channel audio / video receiver that
supports
one
of the audio formats
supported by your
MPEG 2, Dolby Digital and
DTS. Check the receiver manual and the logos
or more
DVD
on
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
player
such
as
the front of the receiver.
AUDIO INPUT
Notes
?
If the audio format of the
output does
digital
not match the
capabilities of your receiver, the
receiver produces a strong, distorted
sound
?
or no
Six Channel
via
a
digital
sound at all.
Digital
Surround Sound
connection
can
only
be
obtained if your receiver is equipped
with a Digital Multi-channel decoder.
?
To
see
the audio format of the
current DVD in the
on-screen
display,
press AUDIO.
11
On-Screen
You
can
the TV
using
display
screen.
the
Playback
Display
the
general playback status on
can be changed
use the on-screen display:
menu.
To
1.
Press DISPLAY
2.
Press v / V to select
Repeat
title
A-B
Repeat
sequence
#1:1/9
Enter
Marker
Title
Some items
Status/Restrictions
Marker Search
123456789
The selected item is
3.
Press b / B to
also
use
an
Resume
highlighted.
setting. You can
appropriate
number). For some
change
menu
item.
the
Action
play
from this
prohibited
or
point
not available
the number buttons if
(e.g. inputting
the title
functions, press SELECT/ENTER
the
a
during playback.
to execute
setting.
Notes
?
?
Some discs may not provide all of
the features shown below.
If
no
button is
seconds, the
pressed
for 10
on-screen
display
disappears.
Example:
On-Screen
Display during playing
Items
Function / Action using v / V to select item
Title Number
Chapter
1/3
Number
1/12
Time search
Audio
language
Digital Audio
Output mode
1 ENG
and
Angle
language
Shows the current title number and total number of titles /
skips
to the desired title number.
Shows the current
chapters
/
Shows the
0:20:09
Subtitle
DVD
D
5.1 CH
skips
chapter
elapsed playing
1 ENG
Sound
language
language,
changes
/
changes
b /
B, Numbers,
/
changes
angle number
angle.
b/Bor
the
the
AUDIO
b/Bor
and total number of
the
b/Bor
ANGLE
changes
the
setting.
b/Bor
SOUND
12
or
or
Numbers, SELECT/ENTER
SUBTITLE
Shows the current sound mode /
3D SUR
by elapsed
setting.
angles
B, Numbers,
SELECT/ENTER
and channel number /
Shows the current
1/3
number.
time / searches
Shows the current audio soundtrack
Shows the current subtitle
ABC
chapter
time.
encoding method,
setting.
b /
SELECT/ENTER
number and total number of
to the desired
Selection Method
Initial
Original:
Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and
the Setup menu, among other things. For details
on each Setup menu item, see pages 13 to 15.
To
display
Refers to the
which the disc
original language
in
recorded.
was
Other: To select another
language, press number
buttons then SELECT/ENTER to enter the
corresponding 4-digit number according to the
language code list in the reference chapter. If you
enter the wrong language code, press CLEAR.
and exit the Menu:
Press SETUP to
display
the
menu.
A second
DISPLAY
press of SETUP will take you back to initial
DISPLAY
screen.
TV
16:9
Aspect
Mode
Display
To go to the next level:
Press B on the remote control.
Widescreen
InstaliodSeup
To go back to the previous level:
Press b on the remote control.
Move
General
Operation
TV
1.
Press SETUP. The
2.
Use v / V to select the desired
Setup
menu
appears.
option
3.
as
5.
as
alternate
setting(s).
Use v / V to select the second desired
then press B to
4.
well
move
option
to the third level.
Use v / V to select the desired
setting
4:3: Select when
then
Display
standard 4:3 TV is connected.
Letterbox:
Press SETUP, RETURN,
on
PLAY to exit the
Mode
a
16:9 wide TV is connected.
DVD
Display Mode setting works only
Aspect mode is set to "4:3".
press SELECT/ENTER to confirm your
selection. Some items require additional steps.
Setup
a
16:9: Select when
on
or
DVD
then
press B to move to the second level. The
screen shows the current setting for the
selected item,
Aspect
Select
Displays
a
wide
the upper and lower
Panscan:
picture
portions of
Automatically displays
the entire
screen
when the TV
with bands
the
screen.
the wide
and cuts off the
picture
portions
that do not fit.
menu.
LANGUAGE
LANGUAGE
Menu
Language
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Menu
Language
Select
a
screen
language
display.
for the
Setup
Disc Audio / Subtitle / Menu
Select
menu
and
on-
DVD
Select the
track
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
13
AUDIO
Dynamic Range
options.
according
DVD
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
type of audio system you
a
Dolby Digital
Bitstream
presentation possible, thanks to digital audio
technology. However, you may wish to compress
the dynamic range of the audio output (the
DTS
Bitstream
difference between the loudest sounds and the
MPEG
PCM
Sample Freq.
48 kHz
DRC
On
Vocal
On
to the
use.
AUDIO
/ DTS / MPEG
This allows you to listen to a
lower volume without losing clarity of
quietest ones).
movie at
a
sound. Set DRC to On for this effect.
Move
Dolby Digital
(DRC)
variety of audio output
player's AUDIO options
Each DVD disc has
Set the
Control
Vocal
Select
DVD
Set to On
DVD
DVD is
only when a multi-channel karaoke
playing. The karaoke channels on the
Bitstream: Select "Bitstream" if you connect
Player's DIGITAL OUT jack to an
disc mix into normal stereo sound.
amplifier or other equipment with
Digital, DTS or MPEG decoder.
OTHERS
the DVD
PCM
/
(for Dolby Digital
when connected to
stereo
amplifier.
Digital
or
a
Dolby
a
MPEG):
The Auto
Play settings
can
be
changed.
Select
two-channel
digital
Dolby
automatically
OTHERS
DVDs encoded in
MPEG will be
Auto
Off
Play
downmixed to two-channel PCM audio.
Off (for DTS): If you select "Off", the DTS
signal is not output through the DIGITAL OUT
jack.
Move
Sample Freq. (Frequency)
DVD
Auto
If your receiver or amplifier is NOT capable of
96 kHz signals, select 48 kHz. When
this choice is made, this unit automatically
handling
converts any 96 kHz
system
can
signals
to 48 kHz
so
your
decode them.
DVD
set up the DVD Player so a DVD disc
starts playing whenever the DVD is
can
automatically
inserted.
If Auto
Play
mode is set to On, this DVD
If your receiver or amplifier is capable of
96 kHz signals, select 96 kHz. When
this choice is made, this unit passes each type
of signal through without any further processing.
amplifier
time and then
play
On: Auto
Play
function is active.
back the
Off: Auto
Play
function is not active.
to
Note: The Auto
work for
14
player
longest playback
title automatically.
will search for title that has the
handling
Check the documentation for your
verify its capabilities.
You
Play
Select
some
Play
DVDs.
function may not
LOCK
(Parental Control)
must have the
Move
Select
Password
that may not be
suitable for children to view. Many of these discs
control information that
disc. Movies and
depending
more
The
scenes
on
suitable
or
to certain
scenes are
the
country.
You
applies
rated from 1 to 8,
or
alternative.
your children from
being
able
on
the LOCK
"Rating"
on
the LOCK
menu
2
shown left
as
new
level
rating
menu.
menu
InstaliodSeup
then
(Rating). "Change"
4. Press SETUP to exit the
forget
your
Security
forget your security
using
following steps:
menu.
Code
code you
can
clear it
the
the
access
Rating,
Password and
Country
yet
entered
to
a
security
code you
are
prompted
so.
1.
Press SETUP to
2.
Input the 6-digit
security code is
Enter
a new
Country
Code
3.
Input a 4-digit code and press
SELECT/ENTER. Enter it again and press
SELECT/ENTER to verify. If you make a
mistake before
pressing SELECT/ENTER,
press CLEAR.
display
1.
buttons.
on
Select
the
Setup
menu.
number "210499" and the
cleared.
code
as
described above.
DVD
Enter the code of the
standards
based
3.Selectaratingfrom1to8usingthev/V
Rating
rating
4-digit code, then press
Input it again to verify.
If you
Code features, you must input the 4-digit
security code you created. If you have not
do
the
SELECT/ENTER.
If you
then
press B.
2. To
lower
highlighted.
to view material you believe is unsuitable.
1. Select
or a
change password.
or
step
"New" is
3. Enter the
control feature allows you to block
to scenes below the rating you input,
thereby preventing
enter
2. Follow
parental
access
rating
press B.
the
scenes on
can
scene
(Security Code)
1. Select Password
Some discs offer
scenes as an
same
4. Press SELECT/ENTER to confirm your
selection, then press SETUP to exit the
DVD
parental
complete disc
alternate
suitable alternative is found,
stops. You must enter the 4-
playback
digit password or change
in order to play the disc.
UK
no
an
New
Code
Some movies contain
If
unless
the disc. The alternative
one.
Password
Country
to the
on
Unlock
Rating
contain
played
is available
LOCK
Rating
not
are
country/area
whose
used to rate the DVD video disc,
the list in the reference chapter.
were
Code"
"Country
on
the LOCK
menu
then press B.
1-8:
Rating one (1) has the most
rating eight (8) is the least
2.
Follow
restrictive.
3.
Select the first character
Unlock
4.
step
2
as
shown left
restrictions and
If you select unlock, parental control is not
active and the disc plays in full.
cursor
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
5.
Note: If you set a rating for the player,
scenes with the same rating or
Shift the
(Rating).
Press SELECT/ENTER to confirm your
country code selection.
all disc
lower
are
played. Higher
rated
scenes
15
Operation
Playing
a
General Features
DVD
Note: Unless stated otherwise, all
operations described use the remote
Playback Setup
1.
Turn
on
source
2.
Turn
the TV and select the video
connected to the DVD
on
the audio
select the
input
player.
system (if applicable) and
source
connected to the DVD
player.
3.
Moving
to another TITLE
When
disc has
move
Press OPEN/CLOSE to open the disc tray
and load your chosen disc in the tray, with the
side down.
playback
4.
control. Some features may also be
available on the Setup menu.
input
Press OPEN/CLOSE to close the
Playback
starts
automatically.
If
a
more
than
title, you
one
can
to another title. Press DISPLAY while
playback is stopped then the appropriate number
(0-9) or use b / B to move to another title.
You can play any title by inputting its number
while playback is stopped.
tray.
playback
Moving
to another CHAPTER
When
title
on a
you
can move
does not start, press PLAY.
In
some
cases, the disc
menu
might
appear
instead:
a
chapter,
disc has
than
more
to another
one
chapter
as
follows:
Use the b B v V buttons to select the
?
MENU to return to the
Press SKIP/SCAN .
playback
title/chapter you want to view, then press
SELECT/ENTER to start. Press TITLE or
return to the
menu screen.
?
>
during
chapter or to
the current chapter.
or
to select the next
beginning
of
Press SKIP/SCAN . twice
back to the
briefly
to go
previous chapter.
Notes
?
?
If
parental
control is set and the disc
is not within the
rating settings you
must input the password.
(See "Lock Menu" on page 15.)
?
DVDs may have a region code. Your
player does not play discs that have
region code different from your
player. The region code for this player
is 2 (two).
To go
directly to any chapter during DVD
playback, press DISPLAY and press v / V
select the chapter icon. Then, input the
chapter number or use b / B.
Search
1.
Press and hold SKIP/SCAN .
about two seconds
a
2.
to select the
DVD; X2, X4, X16
3. To exit SEARCH
or
> for
or
during playback
Press and hold SKIP/SCAN .
repeatedly
16
to
or
.
>
required speed.
X100
mode, press PLAY.
Still Picture and
1.
Frame-by-Frame Playback
Press PAUSE/STEP
on
Note: If you press SKIP
(>) once
during Repeat Chapter (Track) playback,
the repeat playback cancels.
the remote control
during playback.
2. Advance the
3.
A-B
Repeat
picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To
To exit still motion mode, press PLAY.
1.
repeat
a
sequence.
"
Press A-B at your chosen starting point.
appears briefly on the TV screen.
A
-
"
Slow Motion
2.
1.
Press SLOW
2.
Use SLOW
(t
(t
or
speed: 1/16, 1/8,
3.
or
T)
1/4
T) during playback.
to select the
or
or
forward.
To exit slow motion mode, press PLAY.
play
a
Press REPEAT
title/chapter/all/track
during playback
on a
to select
disc.
a
repeat mode.
DVD Video Discs
?
-
again at your chosen end point.
briefly on the TV screen and
repeat sequence begins.
B" appears
Press A-B
again
to cancel.
3D Surround
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
can
desired
3.
To
Repeat
You
the
required
1/2 backward
Press A-B
"A
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
?
Title:
?
Off
:
repeats the
does not
-
current title.
of the five+
(instead
speakers
speakers normally required
for multi-channel audio from
a
home theater
system).
1.
Press SOUND and select "3D SUR"
during
playback.
2.
play repeatedly.
To turn off the 3D surround effect, press
SOUND and select "Normal".
Time Search
To start
1.
playing
at any chosen time
on
the disc:
Press DISPLAY
screen
shows
during playback. The ondisplay appears. The time search box
the elapsed playing time.
2.
Within 10 seconds, press v / V to select the
time clock icon and "-:--:--" appears.
3.
Input
the
required
start time in
hours,
minutes, and seconds from left to right. If you
enter the wrong numbers, press CLEAR to
remove
the numbers you entered. Then
input
the correct numbers.
4.
Press SELECT/ENTER to confirm.
Playback
starts from the selected time. If you enter
invalid time,
current
playback
point.
an
continues from the
17
Zoom
Use
1.
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
or
still
playback
to activate the Zoom function. The square
frame appears
the picture.
2.
briefly
in the
right
bottom of
→
multi
zoom
mode
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press
MENU.
through
picture (400% or 1600%), or to
reduce the picture size through the
multi
4.
To
zoom
move
resume
mode.
normal
playback,
picture appears.
Note: Zoom may not work
DVDs.
menu
the disc
2.
The
appears
menu
menu
on
the
3.
offers features such
You
Press MENU
Marker
Camera
start
To Recall
or
1.
disc
During
Clear
Marked Scene
playback,
marker search
2.
a
menu
Within 10 seconds, press b / B to select
marker number that you want to recall or
Press SELECT/ENTER and
4.
If the disc contains
playback
any marker by inputting its
the marker search menu.
play
the Audio
Press AUDIO
Language
repeatedly during playback
language or audio track.
Press SUBTITLE
see
to hear
repeatedly during playback
languages.
to
the different subtitle
Note: If
available
18
recorded at different
different audio
Subtitles
on
scenes
Tip: The angle indicator will blink on the
display window during scenes recorded at
different angles as an indication that angle
switching is possible.
list.
can
displayed.
angles, you
change to a different
angle during playback. Press ANGLE
repeatedly during playback to select a desired
angle. Note that the number of the current angle
appears on the display.
a
number
is
camera
a
starts
scene.
menu
to exit.
can
Or, Press CLEAR
and the marker number is erased from the
You
options,
Angle
Changing
from the marked
again
camera
press SEARCH. The
appears on the screen.
clear.
3.
as camera
and subtitle
Disc Menu
playback from up to nine
memorized points. To enter a marker, press
MARKER at the desired point on the disc. The
Marker icon appears on the TV screen briefly.
Repeat to enter up to nine markers.
can
menu,
Otherwise,
on some
Marker Search
a
a
Press TITLE to exit.
Press MENU and the disc
To enter
screen.
may appear.
angles, spoken language
and chapters for the title.
press CLEAR to
return to the normal
Press TITLE. If the current title has
the
the zoomed
enlarge
corresponding number or use
highlight your selection.
Then press SELECT/ENTER.
1.
Use the bBvVbuttons to
or
the
Input
Title Menu
→
normal size
3.
DVD Features
the b B v V buttons to
Each press of the ZOOM button changes the
TV screen in the sequence: 400% size →
1600% size
Special
appears, the feature is not
the disc.
on
Playing
an
Audio CD
or
MP3/WMA Disc
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
MP3 / WMA disc
is limited
compatibility
?
-
-
?
Audio CD
-
-
Once you insert an audio CD a menu appears
the TV screen. Press v / V to select a track
on
then press PLAY
playback
with this
follows:
player
Sampling frequency: within 8 48 kHz (MP3),
within 22 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file
that has a file extension other than ".mp3" /
as
or
SELECT/ENTER and
".wma".
starts.
0:00:00
?
?
CD-R
?
If you record MP3 / WMA files using software
that cannot create a file system (eg. Direct-
1/12
Audio CD
List
Program
Track1
Add
Track2
Add All
Track3
Delete
Track4
Delete All
physical
it is
CD)
format should be ISO 9660
impossible
to
playback
MP3 / WMA
files. We recommend that you use Easy-CD
Creator, which creates an ISO 9660 file
Track5
Track6
Track7
system.
Track8
?
File
names
should have
letters and must
MP3 / WMA
1.
Press v / V to select
2.
a
Press v / V to select
or
SELECT/ENTER.
0:00:00
folder, and press
see
a
?
the folder contents.
track then press PLAY
Playback
should not contain
They
?
The total number of files
This DVD
Add
achieve
Add All
Music Folder 3
Delete
Music Folder 4
Delete All
.mp3
or
special
letters such
on
the disc should
player requires
discs and
recordings
Operation
to meet certain technical standards in order to
Program
Music Folder 2
an
be less than 999.
1/104
Music Folder 1
incorporate
as/?*:"<>letc.
starts.
MP3 / WMA
List
maximum of 8
extension.
.wma
SELECT/ENTER to
a
optimal playback quality. Pre-recorded
automatically set to these standards.
DVDs
are
There
are
Music Folder 5
many different types of recordable
disc formats (including CD-R containing MP3
Music Folder 6
Music Folder 7
Music Folder 8
WMA files) and these require certain preexisting conditions (see above) to ensure
compatible playback.
or
Tips:
?
If you
are
menu
and want to return to the Folder
list,
use
in
a
file list
the v / V to
on
the MP3/WMA
highlight
and
press SELECT/ENTER.
?
PressandholdV/vtogotothe
previous page.
next /
?
On
a
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
always
be
sought
from the
copyright
owner.
CD with MP3/WMA file and
JPEG file, you can switch MP3/WMA
and JPEG menu. Press TITLE and
MP3/WMA
the
menu
top of
highlighted. Then, use b
or
is
JPEG word
/ B to select MP3/WMA
or
on
JPEG
then press SELECT/ENTER.
19
Audio CD and MP3 / WMA Disc
Random
Features
1
Pause
1.
2.
Press PAUSE/STEP
To return to
Moving
2
during playback.
playback,
again.
press PLAY
To return to normal
playback, press
repeatedly until RANDOM
disappears from the display window.
RANDOM
or
press
Tip: By pressing SKIP/SCAN >
during random playback, the unit selects
to another Track
another track and
Press SKIP/SCAN
1.
(.
>) briefly
during playback to go to the next track or to
return to the beginning of the current track.
2.
Press SKIP/SCAN . twice
back to the
You
during playback. Random
Playback begins immediately and RANDOM
appears on the display window and menu
screen.
PAUSE/STEP
3.
Press RANDOM
can
or
previous
play
briefly
to go
any track
3D Surround
can
produce
a
3D Surround effect, that
playback from two
simulates multi-channel audio
by inputting
its
conventional stereo
number.
or more
speakers, instead of the
speakers normally required to listen
multi-channel audio from
Repeat Track/All/Off
You
1.
can
play
1.
title/chapter/all/track
a
Press REPEAT when
playing
a
on a
Press REPEAT to select
2. To turn off the 3D Surround
disc. The
desired
repeat
Repeat
mode.
?
Track:
?
All:
?
Off(No display):
1.
repeats the current track
repeats all the tracks on a disc.
does not
home theater
Press SOUND and select "3D SUR"
SOUND
a
a
five
to
system.
during
playback.
disc.
repeat icon appears.
2.
random
playback.
This unit
track.
resumes
play repeatedly.
effect, press
again.
A-B
To
repeat a sequence during disc playback
press A-B at your chosen starting point. The
Repeat icon and "A" appear on the menu
screen.
Note: If you press SKIP (>) once
during Repeat Track playback, the
2
repeat playback cancels.
Search
1.
3
Press and hold SKIP/SCAN
about two seconds
2.
3.
20
(. or >)
during playback.
Press SKIP/SCAN
for
to select the
(. or >) repeatedly
required speed: X2, X4, X8
backward
forward.
or
To exit SEARCH mode, press PLAY.
Press A-B
again at your chosen end point.
Repeat icon and "A-B" appear on the
menu screen, and the sequence begins to
play repeatedly.
The
To exit the sequence and return to normal
play, press A-B again. The Repeat icon
disappears
from the
menu screen.
Viewing
a
JPEG Disc
this DVD Player you can view Kodak
PICTURE CDs and discs with JPEG files.
Using
1.
Insert
menu
a
disc and close the
the TV
on
appears
JPEG
Slide Show
tray. The JPEG
screen.
Use vVbBto
highlight
viewing a picture
previous file.
Preview
List
JPEG Folder 1
Slide Show
JPEG Folder 2
Speed
II
JPEG Folder 3
JPEG
to another File
Moving
Press SKIP/SCAN
JPEG
the Slide Show then
press SELECT/ENTER.
(.
or
>)
once
while
to advance to the next
or
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 8
1.
Press PAUSE/STEP
The
2.
Press v / V to select
a
If you want to view
JPEG disc
particular file, press
file and press
SELECT/ENTER or PLAY. Slide Show starts
highlight
?
Speed option
is not
viewing
move
to the
a
file, you
can
press RETURN
menu
(JPEG menu).
compatibility
with this
player
is
follows:
display
see an on-screen
Operation
after several
less than 3760
x
3840
pixels
and burn
another disc.
There
are
four Slide
(Fast),
(Off).
>>>
>>
Speed options:
(Normal), >(Slow) and
Use vVbBto
Then,
use
highlight
the
b / B to select the
Speed.
option
you want to use then press
SELECT/ENTER.
The total number of files and folders
on
the
disc should be less than 999.
?
?
as
---
previous
PressandholdV/vtogotothe
next / previous page.
II
again.
of the files may be too large
minutes,
reduce the resolution of the JPEG files to
?
?
or
some
Tips:
?
show, press PLAY
Depending upon the size and number of
JPEG files, it could take a long time for the
DVD player to read the disc's contents. If you
don't
Off.
to
slide show.
a
a
from the selected file if
While
during
go into PAUSE mode.
press PAUSE/STEP
limited
v / V to
now
and press
highlight
SELECT/ENTER.
3.
will
2. To return to the slide
appears. If you are in a file list and want to
return to the Folder list, use the v / V buttons
the remote to
player
folder, and press
SELECT/ENTER. A list of files in the folder
on
JPEG
Still Picture
JPEG Folder 7
Some discs may be incompatible due to a
recording format or the condition of
different
disc.
?
Ensure that all the selected files have the
".jpg" extensions
layout.
?
If you set Speed option to Off, Slide
Show is not active.
?
when
copying
If the files have
".jpe"
or
please
them
as
File
rename
into the CD
".jpeg" extensions,
".jpg" file.
".jpg" extension will not
by this DVD player. Even
the
files
are
shown as JPEG image
though
files in Windows Explorer.
names
without
be able to be read
21
5.
Programmed Playback
memory. A program can contain 99 tracks
or 300 tracks (MP3/WMA).
1.
Insert
(Audio
You
1.
Audio CD and MP3/WMA Discs:
Audio CD
or
MP3/WMA
menu
appears
2.
Audio CD
a
title/chapter/all/track
Press REPEAT when
playing
a
on a
disc.
disc. The
Press REPEAT to select
a
desired
repeat
mode.
1/12
0:00:00
play
can
Tracks
repeat icon appears.
as
below.
0:00:00
SELECT/ENTER to start.
Repeat Programmed
disc.
a
or
Playback begins in the order in which you
programmed the tracks and "PROG." appears
on the display window. Playback stops after
all of the tracks on the Program list have
played once.
The program function enables you to store your
favorite tracks from any disc in the player
CD)
Press PLAY
1/104
MP3 / WMA
List
Program
Track1
Add
Track2
Add All
Track3
Delete
Track4
Delete All
Program
List
Add
Track5
1-Music1
Add All
2-Music2
Delete
3-Music3
Delete All
?
Track:
?
All:
repeats the current track
repeats all the tracks on a disc.
?
Off(No display):
4-Music4
Track6
5-Music5
Track7
6-Music6
Track8
7-Music7
Audio CD Menu
does not
play repeatedly.
Note: If you press SKIP (>) once
during Repeat Track playback, the
MP3/WMA Menu
repeat playback cancels.
2.
Select
3.
Press PROGRAM. Or, select "Add" icon then
SELECT/ENTER to place the selected track
on
the
a
track
on
Program
additional tracks
the List.
list.
Repeat
on
the list.
to
Erasing
1.
4.
can
Track from
Program
List
Use vVbBto select the track that you
erase from the Program list.
wish to
place
2.
You
a
add all tracks in the disc. Select "Add
Press CLEAR. Or, select "Delete" icon then
Press SELECT/ENTER to place the selected
All" icon then press SELECT/ENTER.
track
Select the track you want to start playing
Program list. Press and hold v / V to
additional tracks
on
on
the
Program
on
list.
Repeat
to
erase
the list.
the
move
to the next /
previous
page.
the
Erasing
Complete Program
List
Select "Delete All", then press SELECT/ENTER.
complete Program for the disc is erased.
The
Note: The programs are also cleared
when the disc is removed.
To
resume
normal
playback
from
programmed
playback
Select
a
track
on
the List then press
SELECT/ENTER.
"PROG."
22
disappears
from the
display
window.
System
Additional Features
Last Scene
This
player
You must select the
Memory
memorizes last
disc that is viewed. The last
from the last
scene
scene
remains in
front
if you remove the disc from the
player or switch off the player. If you load a disc
that has the scene memorized, the scene is
recalled.
automatically
Note: This
the
player
of
does not memorize
disc if you switch off the
before commencing to play the
scene
player
a
than 5 seconds to be able to
or
AUTO).
the TV
capable
DVD
limited functions of
player
as
well
as
of
operating
your
LG
an
TV.
1.
Before
the remote control, press the
TV button to select the device to be
using
or
operated.
2
appears when you leave the
in Stop mode for about five minutes.
If the Screen Saver is
the DVD
more
system (PAL, NTSC,
Controlling
DVD
screen saver
player
a
Your remote control is
Screen Saver
DVD
for
panel
select
disc.
The
mode for
appropriate system
your TV system. If NO DISC appears in the
display window, press and hold PAUSE on the
even
memory
Select
displayed for
Player automatically turns
five minutes,
itself off.
UsethePOWER,CH(v/V),VOL(b/B),
MUTE and TV AV buttons to
Setting
operate the TV.
Remote Control Codes for
This remote control
supports
an
LG TV
two remote control
codes for LG TVs: Code 1 and Code 2.
Video Mode
Setting
Code 1:
With certain discs, the playback
flickering or Dot Crawl is shown
That
means
Vertical
is not
picture may be
on straight lines.
interpolation or De-interlace
matched with the disc. In this
perfectly
picture quality may
changing the video mode.
case, the
To
be
new
improved by
video mode indicator appears on the
Check whether the video quality has
improved. If not, repeat the above procedure
until picture quality is improved.
(film
source
material
or
scan
on
?
shipped
by
or
?
content with
little motion.
factory,
the
2, while holding down
on
the
the remote control.
If the batteries in the remote control
replaced
while the remote control
setting
reverts
If the remote control does not
other code
method.
video based
system.
operate your particular TV, try the
the
Video: Suitable for
from the
is set to Code 2, the
to Code 1.
is determined
film based content
playing
comparatively
the PAL
are
?
video based material recorded
progressive
using
multi-
To set the remote control back to Code 1, while
holding down the TV and press the number "1"
(Auto).
material)
playing
LG TV
the TV, press the number "2" button
remote control.
material of the DVD video
video
an
or a
Notes
from disc information.
Film: Suitable for
Code 2:
button
Video mode sequence: Auto → Film → Video
If you turn off the power, the video mode will
Auto: The
NTSC
remote control to Code
screen.
return to initial default state
using
remote control is set to Code 1. To set the
the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
TV
LG TV
When the unit is
change
The
an
system.
or use
the remote control
originally supplied
with the LG TV.
Due to the
of codes used
variety
by
manufacturers, our company cannot
guarantee that the remote control
can operate every type of LG TV.
23
Maintenance and Service
Refer to the information in this
contacting
save
packing
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth
moistened
with a mild detergent solution.
lightly
the
Do not
the unit
original shipping
materials. If you need to
for maximum
was
the unit
Cleaning
surfaces
the Unit
shipping
Please
before
To clean the
Handling
When
chapter
service technician.
a
carton and
ship
the unit,
as it
the unit
protection, re-pack
originally packed at the factory.
are
use
benzine,
or
strong solvents such as alcohol,
thinner, as these might damage the
surface of the unit.
Maintaining
the Unit
The DVD
Keeping
?
Do not
spray
?
the exterior surfaces clean
use
near
volatile
liquids
contact with the unit
they
as
insecticide
plastic products in
for a long period of time.
or
leave marks
on
are
diminished.
the unit.
Do not leave rubber
since
such
player is a high-tech, precision device.
optical pick-up lens and disc drive parts
dirty or worn, the picture quality could be
If the
the surface.
Depending on the operating environment,
regular inspection and maintenance are
recommended after every 1,000 hours of
For details,
please
contact your nearest
authorized service center.
24
use.
Troubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD player does
?
No disc is inserted.
?
Insert
disc.
a
cord into the wall outlet
(Check
that the DVD
audio CD indicator in the
not work.
No
Plug the power
securely.
picture.
?
The TV is not set to receive DVD
?
lit.)
Select the
appropriate
mode
signal output.
?
window is
The video cable is not connected
or
display
video
input
the TV.
on
?
Connect the video cable
securely.
securely.
No sound.
?
The connected TV power is turned off.
?
Turn
?
The
?
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
audio receiver
The audio cables
mode of the
so
?
Connect the audio cable
The power of the equipment connected
with the audio cable is turned off.
?
Turn
The AUDIO
?
are
not connected
input
you can listen to the
sound from the DVD player.
signal output.
?
the TV.
on
securely.
securely.
?
?
wrong
The
playback picture
is
options
position.
?
The disc is
?
No disc is inserted.
are
set to the
the
on
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
dirty.
?
Clean the disc.
poor.
The DVD
not start
player does
playback.
?
Insert
disc.
a
(Check
that the DVD
audio CD indicator in the DVD
is
?
An
unplayable
disc is inserted.
?
or
display
lit.)
Insert
playable
a
disc.
(Check
the disc
type, color system, and regional code.)
?
The disc is
down.
placed upside
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
?
The disc is
?
The
dirty.
?
level is set.
rating
?
does not work
?
The remote control is not
the remote
properly.
?
?
Cancel the
There is
an
obstacle in the IR
path between
DVD player.
The batteries in the remote control
are
rating
?
tray
guide.
rating
function
or
change
level.
Point the remote control at the remote
sensor
player.
the remote control and the
?
pointed at
player.
the DVD
The remote control is too far from the
DVD
?
sensor on
the disc
Clean the disc.
the
The remote control
on
inside the
correctly
of the DVD
player.
Operate
the remote control closer to
the DVD
player.
?
Remove the obstacle.
?
Replace
the batteries with
new ones.
exhausted.
25
Reference
This
chapter
includes
important
reference information to
help
you set your DVD
player.
Language Codes
Use this list to
input
your desired
language
for the
following
initial
settings:
Disc Audio, Disc Subtitle,
Disc Menu
26
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
6566
Fiji
7074
Lingala
7678
Singhalese
8373
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
Malagasy
7771
Somali
8379
Ameharic
6577
Galician
7176
Malay
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
6588
Greenlandic
7576
Marathi
7782
Tagalog
8476
Azerbaijani
6590
Guarani
7178
Moldavian
7779
Tajik
8471
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
6985
Hausa
7265
Nauru
7865
Tatar
8484
Bengali; Bangla
6678
Hebrew
7387
Nepali
7869
Telugu
8469
Bhutani
6890
Hindi
7273
Norwegian
7879
Thai
8472
Bihari
6672
Hungarian
7285
Oriya
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Panjabi
8065
Tigrinya
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tonga
8479
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
Esperanto
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Codes
Country
Choose
a
country code from this list.
Code
Country
Afghanistan
Code
AF
Country
Equatorial
Albania
AL
Algeria
DZ
American Samoa
Andorra
Angola
Anguilla
AO
Antarctica
AQ
AG
Former Czechoslovakia
Antigua and
Argentina
Barbuda
Code
Country
GQ
Macedonia
Eritrea
ER
Estonia
EE
AS
Ethiopia
AD
Falkland Islands
AI
Guinea
Code
Country
MK
Saint Vincent &
Madagascar
MG
Grenadines
VC
Malawi
MW
Samoa
WS
ET
Malaysia
MY
San Marino
SM
FK
Maldives
MV
Saudi Arabia
SA
Faroe Islands
FO
Mali
ML
SN
Fiji
FJ
Malta
MT
Senegal
Seychelles
Finland
FI
Marshall Islands
MH
Sierra Leone
SL
CS
Martinique (French)
MQ
SG
SC
AR
Former USSR
SU
Mauritania
MR
Singapore
Slovak Republic
Armenia
AM
France
FR
Mauritius
MU
Slovenia
SI
Aruba
AW
France
Mayotte
YT
Solomon Islands
SB
Australia
AU
Mexico
MX
Somalia
SO
AT
(European Territory)
French Guyana
FX
Austria
GF
Micronesia
FM
South Africa
ZA
Azerbaidjan
AZ
French Southern
Moldavia
MD
South Korea
KR
Bahamas
BS
Territories
TF
Monaco
MC
Spain
ES
Bahrain
BH
Gabon
GA
Mongolia
MN
Sri Lanka
LK
Bangladesh
BD
Gambia
GM
Montserrat
MS
Sudan
SD
Barbados
BB
Morocco
MA
Suriname
SR
BY
Georgia
Germany
GE
Belarus
DE
MZ
Svalbard and
Belgium
BE
Ghana
GH
Mozambique
Myanmar
MM
Jan
Belize
BZ
Gibraltar
GI
Namibia
NA
Swaziland
Benin
BJ
Great Britain
GB
Nauru
NR
Sweden
SE
Bermuda
BM
Greece
GR
Nepal
NP
Switzerland
CH
Bhutan
BT
Greenland
GL
Netherlands
NL
BO
Grenada
GD
Netherlands Antilles
AN
Syria
Tadjikistan
SY
Bolivia
Bosnia-Herzegovina
BA
GP
New Caledonia
NC
Taiwan
TW
Botswana
BW
Guadeloupe (French)
Guam (USA)
GU
New Zealand
NZ
Tanzania
TZ
Bouvet Island
BV
Guatemala
GT
NI
Thailand
TH
Brazil
BR
Guinea
GN
NE
Togo
TG
British Indian Ocean
IO
Guinea Bissau
GW
Nicaragua
Niger
Nigeria
NG
Tokelau
TK
Guyana
GY
Niue
NU
Tonga
TO
HT
Norfolk Island
NF
Trinidad and
North Korea
KP
Tunisia
Territory
(French)
Brunei Darussalam
BN
Haiti
Bulgaria
BG
Heard and McDonald
Burkina Faso
BF
Islands
HM
Northern Mariana
Burundi
BI
Honduras
HN
Islands
HK
HU
Islands
Mayen
SK
SJ
SZ
TJ
Tobago
TT
TN
Turkey
TR
MP
Turkmenistan
TM
Norway
NO
Turks and Caicos
TC
Oman
OM
Islands
Cambodia6
KH
Cameroon
CM
Hong Kong
Hungary
Canada
CA
Iceland
IS
Pakistan
PK
Tuvalu
TV
Cape Verde
Cayman Islands
CV
India
IN
Palau
PW
Uganda
UG
KY
Indonesia
ID
Panama
Iran
IR
Central African
Guinea
PA
Ukraine
UA
PG
United Arab Emirates
AE
UK
Republic
CF
Iraq
IQ
Papua New
Paraguay
PY
United
Chad
TD
Ireland
IE
Per u
PE
United States
US
Chile
CL
Israel
IL
Philippines
PH
Uruguay
UY
China
CN
IT
Pitcairn Island
PN
USA Minor
Kingdom
CX
Italy
Ivory
CI
Poland
PL
Islands
CC
Jamaica
JM
PF
Uzbekistan
UZ
CO
Japan
JP
Polynesia (French)
Portugal
PT
Vanuatu
VU
Comoros
KM
Jordan
JO
Puerto Rico
PR
Vatican
Congo
CG
Kazakhstan
KZ
Qatar
QA
Venezuela
Cook Islands
CK
Kenya
KE
Reunion
RE
Vietnam
Costa Rica
CR
Kiribati
KI
Romania
RO
Croatia
HR
Kuwait
KW
Russian Federation
RU
Virgin
Virgin
Cuba
CU
Kyrgyzstan
KG
Rwanda
RW
Wallis and Futuna IslandsWF
CY
Laos
LA
S.
GS
Western Sahara
CZ
Latvia
LV
S. Sandwich Isls.
DK
Lebanon
LB
Saint Helena
Djibouti
DJ
Lesotho
LS
Saint Kitts &
Dominica
DM
Liberia
LR
Nevis
DO
Libya
LY
Saint Lucia
TP
Liechtenstein
LI
Saint Pierre and
Ecuador
EC
Lithuania
LT
Miquelon
Egypt
EG
Luxembourg
LU
Saint Tome and
El Salvador
SV
Macau
MO
Principe
Christmas Island
Cocos
(Keeling)
Islands
Colombia
Cyprus
Czech
Republic
Denmark
Dominican
Republic
East Timor
Coast
(French)
Georgia
&
Anguilla
SH
Outlying
UM
City
State
Islands
Islands
VA
VE
VN
(British)
(USA)
VG
VI
EH
Yemen
YE
Yugoslavia
YU
Zaire
ZR
KN
Zambia
ZM
LC
Zimbabwe
ZW
PM
ST
27
Specifications
General
Power
Power
requirements
AC 110-240 V
consumption
14W
Dimensions
(Approx.)
,
50/60 Hz
360x48x241mm(WxHxD)
Weight (Approx.)
2.1
Operating temperature
5°Cto35°C(41°Fto95°F)
Operating humidity
5%to90%
kg
System
Laser
Semiconductor laser
Signal system
PAL / NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100 dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 90 dB
range
OUT connectors
(ANALOG
only)
(DVD/CD)
Outputs
VIDEO OUT
1.0 V
(p-p), 75 Ω, negative
(TO TV)
sync, RCA
jack
x
1 /
SCART
Digital
Analog
Audio
output (Coaxial)
Audio
0.5V(p-p),75Ω,RCAjackx1
2.0Vrms(1kHz,0dB),600Ω,RCAjack(L,R)x1/
SCART (TO TV)
output
Accessories
Scart cable
1
Remote control
1
Batteries
2
Note:
Design
and
specifications
Manufactured under license from
are
trademarks of
DTS and DTS
28
Dolby
Digital
Dolby
are
subject
to
Laboratories.
change prior
"Dolby",
"Pro
notice.
Logic",
Laboratories.
Out
are
trademarks of
Digital
Theater
Systems,
Inc.
and the double-D
symbol
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
this Guarantee.
replaced
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D.
We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
does not affect your
control
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RS0064V
Download PDF

advertising