DR4912FVL_AA4ULL_ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
:
DR4912
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
POWER: This DVD Recorder
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
should be removed and
the
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation
point
within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
wiring
such
as a
book
case or
equipment
in
confined space
a
similar unit.
suitable
a
plug
DVD Recorder must be
type fitted. Please refer
of
a
A mains
or
with the earth
green and yellow.
If any other plug is
or
fitted,
symbol
use a
plug
with bared
mains socket.
Do not connect either wire to the earth
letter E
to
removed from the mains lead of this
destroyed.
wires is hazardous if inserted in
5 amp
pin,
or
marked with the
coloured green
or
fuse, either in the plug,
at the distribution board.
IMPORTANT: The wires in this mains lead
accordance with the
BLUE:
NEUTRAL,
following
are
coloured in
codes:
BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD Recorder may not
correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N
WARNING: Do not install this
supply
instructions below:
WARNING: A mains
-
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
mains
supplied with a BSI 1363
approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA
approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or
"LG Electronics U.K.Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug
OF ELECTRIC SHOCK
This
on a
WIRING: This DVD Recorder is
CAUTION: TO REDUCE THE RISK
DO NOT REMOVE COVER
operates
110-240V~,50/60Hz.
or
coloured black. The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L
or
coloured red.
NOTES ON COPYRIGHTS:
It is forbidden
This DVD Recorder
To
ensure
manual
proper
carefully
employs
use
of this
a
Laser
System.
product, please
read this
owner 's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
This
placed
product
on
the
DIRECTIVE
73/23/EEC.
apparatus.
is manufactured to
the radio interference
2
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
CAUTION:
comply with
requirements of EEC
89/336/EEC, 93/68/EEC and
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
to
Table of Contents
INTRODUCTION
DVR HOOKUP
SafetyPrecautions.......................2
TableofContents......................3-4
DVDRecorderOverview................5-10
RecordableDiscs.......................5
PlayableDiscs.........................5
Disc-relatedterms......................6
?TypesofvideoCDs..................6
AboutSymbols.........................6
?Aboutthesymboldisplay............6
About the disc symbols for instructions
6
?
AboutDVD-RandDVD-RWdisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
About word 'Original' and 'Playlist'
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.7
.7
?
.
?
AboutDVD+RandDVD+RWdisc.
.
.
.
.
7
7
.7
AboutDVDrecording....................8
Disc types and recording formats, modes,
andsettings........................8
?Notesforrecording...................8
.9
?RecordingTVaudiochannels.
.9
?Restrictionsonvideorecording.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatis'CPRM'?....................9
?Copyright..........................9
.9
RemoteControlOperationRange.
Remote Control Battery Installation
9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Connections........................15-18
ConnectingtotheAerial.................15
ConnectionstoYourTV.................15
16
Connecting to a cable box or satellite receiver
16
Connecting an external decoder box
ConnectingtoanAmplifier...............17
Accessory Audio/Video (A/V) Connections
.
.
.
.
.
.
.
.
.
.
toDVDRecorder......................18
.18
ConnectingaDigitalCamcorder.
BeforeOperation.....................19-31
InitialSettings.........................19
GeneralOperation.....................19
.
.
.
.
.
.
.
.
.
General...........................19-23
?AutoProgramming..................19
?ProgramEdit....................20-21
?AutoClockSet.....................22
?ManualClockSet...................22
?TVAspect........................22
?DisplayMode......................23
?AV1Decoder......................23
?PBC.............................23
?FactorySet.......................23
Language............................23
?DisplayLanguage..................23
?DiscLanguage.....................23
ResettheDVDRecorder.................9
Audio...............................24
Precautions..........................10
?DolbyDigital.......................24
?Handlingtheunit...................10
?Cleaningtheunit...................10
NotesonDiscs........................10
?Handlingdiscs.....................10
?Storingdiscs......................10
?Cleaningdiscs.....................10
FrontPanel............................11
FunctionDisplayWindow................12
RemoteControlOverview................13
RearPanel............................14
?DTS.............................24
?MPEG...........................24
?SamplingFrequency................24
.24
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
?Vocal............................24
Lock(ParentalControl)...............25-26
?SetPassword......................25
?Rating...........................25
?CountryCode......................26
Recording.........................26-27
?RecordModeSet...................26
?RecordAspect.....................26
?DVRecAudio.....................27
?TVRecAudio......................27
?AutoChapter......................27
Disc..............................27-28
?DiscFormat.......................27
?Finalize..........................28
?DiscLabel........................28
?DiscProtect.......................28
General
?
Explanation of On-Screen Display. 29-31
Displaying Information While Watching TV 29
Displaying Disc Information on-screen 29-31
.
?
.
.
3
INTRODUC
Table of Contents
PLAYBACK
RecordingfromExternalInput.
Recording from External Components
Recording from a Digital Camcorder
.
32-35
Operation with DVD and Video CD.
PlayingaDVDorVideoCD..............32
.
.
.
.
.
.
GeneralFeature.......................32
?MovingtoanotherTITLE.............32
32
Moving to another CHAPTER/TRACK
?
.
.
.
.
.
.
.
.
.
.
.43-44
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
43
43
WhatisDV?..........................44
?DV -RelatedMessages...............44
?T roubleshooting....................44
?Search...........................32
?
Still Picture and
Frame-by-Frame Playback
.
32
?SlowMotion.......................33
?Random..........................33
?Repeat..........................33
?RepeatA-B.......................33
?T imeSearch.......................33
?Zoom............................34
?MarkerSearch....................34
?
Checking
the contents of
EDITING
.45-49
TitleListandChapterListMenu
Using the Title List-Original menu VR ......45
Using the Chapter List-Original menu VR ...45
Using the Title List-Playlist menu VR ......46
Using the Chapter List-Playlist menu VR ...46
Using the Title List menu Video ............47
?DeletingaTitle.....................47
If the disc has already been finalized
47
Using the Title List menu +RW ............48
Using the Chapter List menu +RW .........48
Using the Title List menu +R ............49
Using the Chapter List menu +R .........49
.50-56
TitleandChapterEditing.
Titles,ChaptersandParts................50
AddingChapterMarkers.................50
ChangingTitleThumbnails...............50
MakingaNewPlaylist...................51
Adding Additional Title/Chapters to the Playlist 51
DeletingaTitle/Chapter.................52
DeletingaPart........................52
53
Undoing/Redoing the Last Deleting
NamingaTitle........................53
.54
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................54
.
.
.
.
.
.
.
?
DVDVideodiscs:Menus.............34
?T itleMenu........................34
?DiscMenu........................34
?CameraAngle.....................34
.34
ChangingtheAudioSoundtrack.
.35
?ChangingtheAudioChannel.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?3DSurround......................35
?Subtitles..........................35
?InstantSkip.......................35
.35
?FindingLocationsonaDisc.
?LastConditionMemory...............35
?PIP(PictureinPicture)...............35
.36-37
AudioCDandMP3Operation.
.36
PlayinganAudioCDorMP3Disc.
Musicmenuoptions....................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Pause...........................37
?MovingtoAnotherTrack..............37
.37
RepeatTrack/All(Floder)/Off.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle.........................55
HideaTitle/Chapter....................55
?Random..........................37
DivideOneTitleIntoTwo................56
?3DSurround......................37
AdditionalInformation...................57
.37
Clean-upRecording....................57
OverwriteRecording....................57
Viewing Title List menu displayed on other
DVDrecordersorplayers................57
Playing your recordings on other
.57
DVDplayers(FinalizingaDisc).
?ChangetheAudioChannel.
.
.
.
.
.
.
.
.
.
.
?Search...........................37
?RepeatA-B.......................37
NotesonMP3Recordings..............37
Programmed Playback with Audio CD and MP3 38
JPEGDiscOperation....................39
ViewingaJPEGDisc...................39
?SkipImage........................39
?RotateImages.....................39
.
?V iewSlideShows...................39
?NotesorJPEGRecordings.
.
.
.
.
.
.
.
.
.
.
.39
.
.
.
.
.
.
.
.
.
.
REFERENCE
LanguageCodeList.....................58
CountryCodeList......................59
Controlling Your TV with the Supplied Remote 60
Troubleshooting.....................61-62
Specifications.........................63
.
RECORDING
BasicRecording........................40
BasicRecordingfromaTV...............40
InstantTimerRecording.................40
TimerRecording.......................41
42
Checking Timer Recording Details
.42
CancelingaTimerRecording.
42
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
42
.
.
.
.
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
DVD Recorder Overview
Recordable Discs
DVD-RW
(Digital
These Discs
Recordings
record again
DVD-R
on
(Digital
These Discs
Video Disc
-
be recorded
can
can
be
erased, then you
the same Disc.
Video Disc
-
be recorded
can
DVD+RW
(Digital
can
Video Disc
be
DVD+R
Video Disc
the
+
cm/12
cm
disc)
Video CD
(VCD)
(8cm/12cmdisc)
ReWritable):
repeatedly.
on
erased, then you
same
(8
can
Recordable):
only once.
be recorded
Recordings can
record again on
DVD
ReWritable):
repeatedly.
on
After you finalize a DVD-R, you cannot
record on it or edit it any more.
These Discs
Discs
Playable
can
Audio CD
(8
cm/12
cm
disc)
In
addition, this unit can play DVD-R/DVD-RW discs;
discs; CD-R/CD-RW discs that
contain audio titles, MP3 files, or JPEG files; SVCD;
DVD+R/DVD+RW
and kodak
picture
CDs.
Disc.
otes
(Digital
These Discs
can
+
be recorded
Recordable):
only once.
--
ment
After you finalize a DVD+R, you cannot
record on it or edit it any more.
--
DVD-R/RW,
ed
--
using
a
or
CD-RW discs.
--
personal computer
or a
DVD
or
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
(or DVD±R/±RW) discs cannot be
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
use irregularly shaped CDs (e.g., heart-shaped
octagonal). Doing so may result in malfunctions.
CD
Regional
code of the DVD Recorder and DVDs
recorder may not play if the disc is damaged or dirty,
or if there is dirt of condensation on the recorder's
This DVD Recorder is
lens.
tured for
If you record a disc
if it is recorded in a
cases
of the
in which it
(the
Do not
or
DVD+R/RW and CD-R/RW discs record-
on
the CD-R/RW
CD-R/RW
played
otes
This recorder cannot record CD-R
or
some
--
--
Depending
using a personal computer, even
compatible format, there are
may not play because of the settings
application software used to create the disc.
(Check with the software publisher for more detailed
information.)
2
designed and manufacplayback of Region 2 encoded DVD
software. The region code on the labels of some
DVD
discs indicates which
type of DVD Recorder
play
those discs. This unit
can
play only
can
DVD discs labeled 2
ALL. If you try to play any other discs, the message
"Incorrect region code. Can't play back" will appear on
or
the TV
screen.
code label
area
Some DVD discs may not have a region
though their playback is prohibited by
even
limits.
otes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
be
may
intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
5
INTRODUC
DVD Recorder Overview
(Continued)
Disc-related terms
Title
About
(DVD only)
About the
The main film content
accompanying
or
feature content
music album.
or
"
Each title is
assigned
locate it easily.
you to
a
title reference number
enabling
(Video
Sections of
a
CD and audio CD
picture
or a
enabling
only)
piece
assigned
musical
audio CD. Each track is
or an
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
moving pictures
pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
and still
Types
There
of video CDs
are
two
About the disc
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
tion still
pictures
menus, search
functions, or other
typical computer-like operations. Moreover, high resolucan
be
played
if
they
are
included
on
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
during operation.
explained in this owner's
that specific disc.
on
screen
for instructions
symbols
A section whose title has
applicable only
symbol.
are
of the
one
to those discs
following symbols
represented by the
Many functions of this recorder are dependent on the
recording mode. One or more of the symbols
VR
+R
+RW ) appear by each
Video
(,
function explained in this manual so that you can see
a glance whether it's relevant for the disc loaded.
,
,
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
recording
recording
mode
mode
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
JPEG
types of video CDs:
with the
6
may appear on the TV
This icon means the function
MP3
Video CDs
PBC
"
Video
Scene
On
symbol display
manual is not available
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
Symbols
MP3 CDs
JPEG CDs
The finalized DVD disc is
as
DVD-Video disc
at
DVD Recorder Overview
(Continued)
Is
About DVD-R and DVD-RW disc
How
are
DVD-R and DVD-RW discs different?
The essential difference between DVD-R and DVD-RW
is that DVD-R is
is
a
a
record-once
medium, while DVD-RW
re-recordable/erasable medium. You
erase a
DVD-RW disc
can
approximately 1,000
re-record/
times.
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R discs and DVD-RW discs recorded in
Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the conas
are
playable
in
some
Video
are
There
are
About word
a product feature that is capaDVD-RW discs recorded with
playing
Recording
format.
'Original'
DVD-R
recording
Video mode
can
?
content refers to what's
Original:
using
recording
are
always
?
recorded
Playlist:
disc
content refers to the edited version of the
how the
---
Original
content is to be
played.
About DVD+R and DVD+RW disc
How
are
DVD+R and DVD+RW discs different?
to
a
a
record-once
medium, while
re-recordable/erasable medium. You
erase a
DVD+RW disc
can
approximately 1,000
times.
in Video mode.
be formatted for VR mode
recording
recording
picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
DVD+RW mode
recording
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?4different
VR mode
?
actually
the disc.
re-record/
this
recording.
?4different
'Playlist'
the edited version.
DVD+RW is
modes available
disc, recordings
DVD-RW discs
or
and
The essential difference between DVD+R and DVD+RW
recorder: VR mode and Video mode. When
a
tape?
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
mode
'recording modes'?
two
video
DVD, you edit by making a 'Playlist' of what
play and when to play it. On playback, the recorder
plays the disc according to the Playlist.
is that DVD+R is
What
a
players.
This indicates
ble of
editing
edits. With
?
(Video Recording)
DVD like
to
on
DVD-Video discs.
DVD-RW discs recorded in VR
a
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
tents of the disc to make them readable to other DVD
players
editing
?
avail-
Video mode
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalizing)
Limited editing features
?
?
?
DVD+R mode
?
?
?
?
ote
recording
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalizing)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features
?4different
DVD-Video Format
(Video mode) is a new format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this recorder in other players.
7
INTRODUC
DVD Recorder Overview
About DVD
(Continued)
Notes for
recording
?
The
recorder
otes
?
This
This recorder cannot make
recordings
on
CD-R
or
CD-RW discs.
?
Our company takes no responsibility for recording failure due to power cuts, defective discs, or damage to
the recorder.
?
on
?
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
Disc types and
and
?
of your discs.
care
recording formats, modes,
?
?
This recorder
can
pre-recorded
DVD-Video
play
five different kinds of DVD disc:
discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is
always
"Video format"---the
ed DVD-Video discs. This
you
can
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
not exact because the
that the exact
recording
compression.
depend
time will
the material
being recorded.
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
When
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
or
audio
recording
exactly
add up to
always
only,
the
recording
and time
the
remaining
length of the
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 27 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
player.
Video Recording
required. (Reinitializing the disc will erase the contents
of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
on
means
are
until the disc is
DVD
By default, the DVD-RW disc format is
format, though you can change this to Video format, if
will take up
?
finalized,
times shown
variable bit-rate video
uses
may not
disc.
settings
recording
recording
?
When
using
DVD-RW disc in Video
a
time available will
title recorded
?
on
The Erase Title
only
increase if you
the disc.
hides the
only
option
(except
?
The overwrite
the last
List-Original menu
actually erase the title
the recording time avail-
not
for the last recorded title
disc in Video
erase
in the Title
title, it does
from the disc and increase
able
mode, recording
mode).
recording
on a
DVD-RW
is available with DVD+RW
disc.
the disc.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
VR mode
Playback, recording, Original/Playlist editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
DVD-R
Video format
Video mode
Playback,
limited
recording,
limited
editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
recording, Title/Chapter editing
DVD+R
+R Video format
DVD+R
Playback,
limited
recording,
format
8
Recording
(default)
mode
Functions
limited
Title/Chapter editing
DVD Recorder Overview
Recording
TV audio channels
This recorder
can
If the NICAM
setting (page 21)
broadcast is
(Continued)
Remote Control
record either NICAM
is set to
or
regular
Auto, then if the
record the NICAM audio.
NICAM, you
non-NICAM, the regular audio is
can
Operation Range
audio.
Point the remote control at the remote
and press
sensor
the buttons.
If the broadcast is
always
recorded.
Restrictions
Remote Control
video
on
recording
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
?V ideo signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
format.
cast programs. CPRM stands for Content Protection for
Recordable Media.
This recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
a copy of those recordings. CPRM
cover on
with
the
rear
and
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Reset the DVD Recorder
If you observe any of the
The unit is
or
following symptoms...
but the power will not
in,
plugged
turn
on
off.
The front
panel display
is not
can
working.
operating normally.
reset the DVD Recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
Unplug
the power
plug it in
and then
cord, wait
at least five
seconds,
again.
cannot then make
recordings
can
only
ted in VR
mode,
played
players
on
be made
on
DVD-RW discs format-
and CPRM
that
are
recordings can only be
specifically compatible with
CPRM.
Copyright
?
?
of
two R03
Caution
...you
CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broad-
can
battery
control, and insert
The DVD Recorder is not
What is 'CPRM'?
you
Detach the
the remote
(size AAA) batteries
aligned correctly.
?You cannot record
?
Installation
Battery
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the country in which you are making a copy. Copying of copyright material such as
films or music is unlawful unless permitted by a legal
exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
9
INTRODUC
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
disc
by
the
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
the disc.
on
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
discs
playing,
as there may be a considerable
increase inside the car.
a
use a
the unit
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
strong
as
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
soft, dry cloth. If the surfaces
soft cloth
temperature
the surface.
To clean the cabinet
Use
case.
light,
Cleaning
Cleaning
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
ter outward.
alcohol,
the surface
of the unit.
Yes
To obtain
10
No
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Front Panel
POWER
Switches the DVD Recorder ON
OFF.
or
Starts
recording.
REC (z)
repeatedly
recording time.
Press
to set the
INPUT4
(VIDEO
IN/AUDIO IN
(Left/Right))
STOP
Connect the audio/video
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Display
Pause
window
Shows the current status of the
Stops playback
or
(x)
recording.
INTRODUC
PAUSE (X)
playback or recording temporarily,
press again to exit pause mode.
DVD Recorder.
PLAY
To
INPUT 4
a
(N)
disc.
(S-VIDEO IN)
Connect the S-Video
external
back
play
output of
an
(TV/ Monitor, VCR,
Camcorder, etc.).
source
OPEN/CLOSE
Opens
DV INPUT
closes the disc
(Z)
tray.
Power indicator
Connect the DV
output of
or
a
Lights up red when
the recorder is in
digital
camcorder.
standby
Disc
Insert
a
mode.
Tray
disc here.
PROG.
(+/-)
Scans up or down through
memorized channels.
m/.
Go to
beginning
of current
chapter/
Press and hold for two seconds for
a
track
fast
or
to
reverse
previous chapter/track.
search during playback.
>/M
Go to NEXT
Press and hold for two seconds for
a
fast forward search
chapter/track.
during playback.
Remote Sensor
Point the DVD Recorder remote control here.
11
Function
Display
Window
REC The recorder is
Disc type indicators
Indicates the type of disc loaded.
recording.
Indicates when the recorder is in timer
recording
or a
timer
recording
is
programmed.
HQ, SQ, LQ, EQ
Indicates
ST Indicates
BIL
Indicates when
a
stereo broadcast is
TRK
mode.
received.
BILINGUAL broadcast
a
is
CHP
being
recording
Indicates current
being
chapter
received.
number.
Indicates current track number.
TV
Indicates when the
recorder is in TV tuner mode.
TITLE
Indicates
current title number
DVD
A +RW
SVC D
-
TITLE
TV
TRK
CHP
BIL
ST
HQSQLQEQ
-RW
Character indicators
Indicates clock, total playing time, elapsed time,
chapter/track number, channel, etc.
12
title
number,
REC
Remote Control Overview
POWER
Switches the recorder ON
OFF.
or
TV/DVD
To view channels selected
recorder tuner
or
by
by
the
the TV tuner.
PIP
Selects PIP function
on or
off.
0-9 numerical buttons
Selects numbered
in
options
the
input to use for recording
(Tuner, AV1-4, or DV IN).
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects
a
subtitle
language.
ANGLE
Selects
a
DVD
camera
angle,
REC
recording.
(z)
Press
repeatedly to set
the recording time.
REC MODE
Selects the
recording
HQ, SQ, LQ,
POWER: Turns the TV
AV: Selects the TV's
EQ.
Timer Record
menu.
a
Program
track number
List
or a
mark
Marker Search
on
the
on
the
menu.
ZOOM
Enlarges
DVD video
image.
INSTANT SKIP
Skips
15 seconds forward
the
(about
of
on
the disc
typical TV
commercial).
length
a
TITLE
Adjusts TV's volume.
Temporarily turns TV sound
OFF, press again to restore.
MUTE:
SKIP(./>)
Go to next
chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
SCAN(m/M)
Search backward
PAUSE/STEP
the disc's Title menu, if
available.
forward.
or
(X)
Pause
playback or recording temporarily, press again to exit pause mode.
N
(PLAY)
Starts
playback.
STOP
(x)
Stops playback
or
recording.
MENU/LIST
Accesses
or
menu on a
Playlist
DVD
disc, Title List
menu.
SETUP
Accesses
or removes
the
Setup
menu.
ENTER
-
Acknowledges menu selection.
Displays information while viewing
a
TV program.
b / B / v / V
Selects
an
PR v / V
Scans up
channels.
(left/right/up/down)
option
in the
menu.
(up/down)
or
down
through
memorized
DISPLAY
Accesses On-Screen
RETURN
-
Displays
off.
PR +/--: Selects TV's channel.
-
CLEAR
Removes
on or
source.
VOL +/--:
mode:
or
TIMER REC
Displays
tray.
TV Control Buttons
if available.
Starts
(Z)
and closes the disc
a menu.
AV
Changes
OPEN/CLOSE
Opens
-
Removes the
Displays
Display.
(O)
the
menu.
menu
of
a
video CD
with PBC.
THUMBNAIL
Selects
a
thumbnail
picture
for the
current title and
chapter for use in the
Original and Playlist menu.
CHP ADD
Inserts
chapter marker when playing/
recording a VR mode DVD-RW disc.
a
MARKER
Marks any
point during playback.
SEARCH
Displays
Marker Search
3D SURR.
Selects 3D SURROUND
during
playback.
RANDOM
Plays
tracks in random order.
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat
sequence.
menu.
PROGRAM
Add the track to the
Program
List.
13
INTRODUC
Rear Panel
AERIAL
Connect the aerial to this terminal.
EURO AV 2 DECODER
Connect the audio/video
Set
output of
an
external
source
(Pay-TV decoder,
Top Box, VCR, etc.).
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
COMPONENT VIDEO OUT
Connect to
a
(Y Pb Pr)
inputs.
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
a
(Left/Right)
TV with video and audio
VIDEO IN 3 / AUDIO IN 3
inputs.
(Left/Right)
Connect the audio/video
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
AC Power Cord
Plug
OPTICAL
into the power
source.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
S-VIDEO OUT
Connect to
a
S-Video
Input
on
TV.
VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT
VIDEO terminal
depending
on
EURO AV 1 AUDIO/VIDEO
Connect to
a
TV with SCART
jack.
RF. OUT
Passes the
signal
from the AERIAL to your TV/monitor
Caution
Do not touch the inner
pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
14
or
RGB
signal
of EURO AV1 AUDIO/
how you connect the DVD Recorder to the TV.
Connections
ips
Depending
Connections to Your TV
on
your TV and other equipment you wish
are various ways you could connect
Make
connect, there
to
the recorder. Use
only
one
the
of the connections
When
described below.
of the
one
capabilities
using
following connections, depending
existing equipment.
on
of your
the COMPONENT VIDEO OUT
jacks,
set the VIDEO OUTPUT switch to COMPONENT.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
When
System
using
the SCART
jack,
set the VIDEO OUT-
PUT switch to RGB.
best connections.
SCART connection
Caution
--
Make
sure
the DVD Recorder is connected
the TV. Tune the TV to the correct video
directly to
input chan-
nel.
--
Do not connect the DVD Recorder's AUDIO OUT
to the
phono
in
jack (record deck)
jack
of your audio sys-
tem.
--
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy protection
system.
Connect the EURO AV1 AUDIO/VIDEO scart
the DVD Recorder to the
TV
using
the scart cable
Connect the VIDEO OUT
the video in
jack
on
cable
jack
DVD Recorder to the
socket
aerial
on
the DVD recorder and the other end into the
input
socket
on
your TV set.
Connect the RF. OUT
jack
on
the DVD Recorder to the
aerial
input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
jack
the TV
on
the DVD Recorder
using
the S-Video
Connect the COMPONENT VIDEO OUT
TV
using
Audio
RF coaxial connection
on
Video connection
recorder.
end of the aerial cable into the TV
(V).
(S).
Component
one
the video cable
S-Video connection
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the DVD
Plug
the DVD Recorder to
jack on
using
the TV
Connect the S-VIDEO OUT
to the Aerial
jack on
jacks on the
Video connection
to the S-Video in
Connecting
corresponding
(T).
in
an
Y Pb Pr
jacks on the
corresponding input jacks on the
cable (C).
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
Recorder to the audio left and
using
the audio cables
(A).
jack
of your audio
IN
jacks of
jacks on
the DVD
the TV
Do not connect the DVD
Recorder's AUDIO OUT
(record deck)
right
to the
phono
in
jack
system.
Rear of TV
Aerial
SCART INPUT
ANTENNA
INPUT
AUDIO INPUT
VIDEO
INPUT
Rear of TV
SCART INPUT
S-VIDEO
L
R
INPUT
COMPONENT VIDEO INPUT
Y
Pb
Pr
AUDIO INPUT
L
VIDEO
INPUT
R
R
T
S
C
AV
Rear of DVD Recorder
Rear of DVD Recorder
15
DVRHOKUP
Connections
(Continued)
to a cable box or
Connecting
Connecting
satellite receiver
If you have
decoder,
a
cable
or
satellite receiver with
a
built-in
connect it to this recorder and your TV
If you have an external,dedicated decoder box for your
satellite or cable TV system, use the setup described on
as
on this page. If you are using a separate
decoder box for your cable/satellite TV, set up following
the instructions on the right.
this page you can:
Record any channel by selecting it on the cable
box/satellite tuner.
?
the
setup
on
Connect RF cables
1
as
this page.
1
2
shown.
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
SCART AV connector
a
on your TV.
This enables you to watch discs.
Use
3
a
DECODER connector to
a
SCART AV connector
on
input
on
your cable/satellite tuner.
SCART cable to connect your decoder to
cable/satellite
tuner.
your
See the manual for your decoder box for more
a
Use
a
SCART cable to connect the EURO AV2
DECODER connector to
SCART AV connector
a
ip
'loop through'
a
allows you to record
tuner in this
a
function. This feature
TV program from the built-in TV
a satellite or cable
recorder, while watching
(see
page
40).
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
a
SCART AV connector
your TV.
Caution:
Caution:
lite receiver
directly
or
cable box.
to your TV
Information from the decoder
pay TV services), is
is off (in standby).
For timer
recording
only
directly
to this
'through' your VCR, satelAlways connect each compo-
or
to
(for example, relating
viewable when this recorder
to work
properly
on
this
recorder,
the satellite/cable box must also be switched
Do not connect this recorder
on
your satellite/cable box.
Do not connect your decoder box
recorder.
This recorder has
nent
Use
on
your satellite/cable box.
This enables you to record scrambled TV channels.
channel
3
4
SCART cable to connect the EURO AV2
Connect the cable from the aerial/cable TV outlet to
the aerial
detailed instructions.
This enables you to watch and record TV channels.
2
external
decoder box
shown
Using
an
ing recording.
It is not possible to watch
another using this setup.
one
on
dur-
TV program and record
AV receiver.
Decoder
Aerial/
SCART AV
Cable TV
Wall Jack
Aerial/Cable TV
Wall Jack
Cable Box
or
Satellite Receiver
Cable Box
or
Satellite Receiver
AERIAL
INPUT
AERIAL
OUTPUT
SCART AV1
SCART AV2
AERIAL
INPUT
Rear of DVD Recorder
16
AERIAL
OUTPUT
SCART AV1
SCART AV2
Rear of DVD Recorder
Connections
Connecting
(Continued)
to an
Amplifier
Rear of DVD Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
Right
your amplifier, receiver,
audio cables (A).
or
jacks on the
in jacks on
system, using the
stereo
right
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
Connect
one
DVRHOKUP
AUDIO OUT
DVD Recorder to the audio left and
X
A
O
of the DVD Recorder's DIGITAL
AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
COAXIAL
DIGITAL INPUT
You will need to activate the recorder's
2 put. (See
"Audio"
on
page
digital
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
out-
Amplifier (Receiver)
24).
Multi-channel sound
Digital
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
otes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--To
see
--
the audio format of the current DVD in the
on-
press AUDIO.
This recorder does not perform internal
screen
display,
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
17
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to DVD Recorder
Connect the
input jacks (AV3, AV4) on the DVD
jacks on your accessocomponent, using audio/video cables.
Recorder to the audio/video out
ry
Connecting
Using
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Digital Camcorder
the front
connect
a
panel DV IN jack, it is possible to
digital camcorder or video deck or
recorder and digitally transfer DV tapes
DV
DVD-R/RW
or
DVD-R/RW discs to DVD-R/RW.
Use
ote
a
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder/video deck to the front
DV IN jack of this recorder.
jack
panel
ote
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
This
connection to DV
not
jack is for
compatible
with
digital
equipment only.
satellite tuners
or
It is
D-VHS
video decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
R
DV
Digital
OR
DV
IN/OUT
L
VIDEO
OUTPUT
OR
Rear of
DVD Recorder
18
Front of
DVD Recorder
Front of DVD Recorder
Camcorder
Before
Initial
In this
Operation
General
Settings
menu
system, there
several ways to
are
Auto
cus-
settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu sys-
Programming
tomize the
tem will appear
on
the TV
to
help
see
"B"
The third level
can
be
B. For
displayed by pressing
els, you will
screen.
on
the
navigating the menu levright side of the menu label
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 88 TV
channels.
Preparation:
Connect the DVD Recorder to the desired
shown in
to the Aerial
Connecting
on
type of aerial,
as
page 15.
you go to the next level.
Auto
Programming
Program
To
bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
Stop
Edit
Clock Set
TV
Searching
11%
Aspect
Display
Mode
AV1 Decoder
To go to the next level:
Press B on the remote control.
PBC
Factory
To go back to the previous level:
Press b on the remote control.
General
1
2
1
Operation
2
Press SETUP.
The
Setup
menu
While the desired item is
move
option.
menu
appears.
Use v / V to select the General
3
4 option.
5
6
selected, press B
to
Press B to
"Start" icon is
Use v / V to select the second desired
option
option.
option.
is selected, press B to
to the second level.
Use v / V to select the Auto
to the second level.
Press B to
Setup
move
Use v / V to select the desired
3
4
5
6 press
Press SETUP.
The
While the General
appears.
Set
move
Programming
to the third level.
highlighted.
Press ENTER to
begin the channel search.
automatically cycle through all
channels in the area and place them
The tuner will
move
to the third level.
available
in
the tuner's memory.
Use v / V to select the desired
setting
then
ENTER to confirm your selection.
Some items require additional steps.
7
Press SETUP to exit the
Setup
menu.
19
DVRHOKUP
Before
Operation (Continued)
Program
Edit
You
a
can
move,
edit
8
channel
manually (add, delete,
Press RETURN
List
Program
Programming
You
Edit
Program
Edit
nels
Clock Set
TV
Aspect
Display
Edit
perform
manually.
can
a
search to select and store TV chan-
1. Use v / V to select
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Mode
menu
AV1 Decoder
PBC
Factory
List
Program
Set
menu.
2. Use v / V to select
1
2
'Program
options then press ENTER.
Program Edit menu appears.
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the General
While the General
move
option
Edit'
option
from the
option.
PR
3
4 press
Program
name,
etc.).
Auto
to exit
(O) repeatedly
menu.
is selected, press B to
Seek
07
Ch.
MFT
C7
0
OK
to the second level.
Use v / V to select the
B to
"Edit" icon is
move
Program
Edit
option
then
to the third level.
3. See the
highlighted.
Press ENTER.
5 Program
List
PR-01
menu
b / B
appears.
PR
Ch.
MFT
Station
01
C12
+10
BBC1
02
C23
0
BBC2
ITV
03
C7
0
04
C27
-10
05
C17
0
CHTV
06
C33
0
WEST
07
C34
+20
ANGLI
08
C47
0
ABC
09
C10
-60
TV2
v / V
cursor
below to
(left/right):
Moves the
use
cursor
(up/down): Changes
position.
the
PR: Indicates program number
CH2
Seek: Searches
a
Program
Edit
to the
previous
or
Searching stops
setting
at the current
(display only)
station
b / B to select Seek
10
automatically. Use
option then press v / V.
when the DVD recorder tunes in
a
station.
11
Move
on
next column.
Decoder NICAM
Select
descriptions
menu.
Page Up/Down
Close
Ch.:
Changes the channel number to
option then press v / V.
edit. Use b / B
to select Ch.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
display.
appears
on
the left side of the
menu
7
Use v / V to select
an
then press ENTER
option
to confirm.
Program
Edit
Program
Edit: Edits the select-
Station Rename
ed program.
Move
Station Rename: Edits the sta-
Delete
tion
Decoder On/Off
Move: Moves the
NICAM Auto/Off
location
name.
on
program's
the program list.
Delete: Deletes the program
from program list.
Decoder On/Off: Set the
decoder for the program to On
or Off.
NICAM Auto/Off: Set the
NICAM function to for the program Auto or Off.
20
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
Before
Operation (Continued)
Edit
Program
Sort TV channels
(Continued)
You
Station Rename
You
up to 5 characters
independently.
Names
be
can
long.
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
menu
List
manually
program's position
menu.
Program List options then
Keyboard menu appears.
option
from
press ENTER.
Program
123456789
0
ABCDEFGH
J
I
Space
option
3. Use v / V to select
desired
a
can
a
a
program
on
the
for the station. Use vVbBto select
Switches the
keyboard
upper
characters.
keyboard
to lower
characters.
Switches the
keyboard
to
symbol
char-
acters.
List
OK: Select to finish.
?
Cancel: Select to exit the
?
(PLAY):
cursor
Inserts
X
(PAUSE/STEP):
cursor position.
x
(STOP),
to left
or
ding
option from Program List
Program is deleted.
then press ENTER. The
the Decoder On/Off
1. Use v / V to select the program you wish to link with
the decoder function on the Program List menu then
press ENTER.
Program List options appears
Program List menu.
on
the left side of the
space at the
from
On,
options then press ENTER. If you
'Decoder' appears on the menu screen.
on
Setting
the NICAM Auto/Off
can
sions in NICAM Stereo.
entering a name
cursor position.
Deletes the after character at the
receive Hi-Fi sound transmis-
However, if sound distortion
occurs, due to poor reception, you can switch Off
1. Use v / V to select a program on the Program List
menu
then press ENTER.
List options appears
Program
Program
List
on
the left side of the
menu.
2. Use v / V to select 'NICAM Auto/Off'
previous
character
Program
select
cursor
(0~9): Enters
location
option
List
This DVD recorder
right.
position.
. / >: Moves
Numbers
a
CLEAR: Deletes the
cursor
menu.
a
Remote control buttons for
at the
Setting
select
position.
b / B: Moves
N
options
Program
menu.
space at the cursor position.
Delete: Deletes the previous character at the
cursor
?
Inserts
Space:
List
menu.
2. Use v / V to select 'Decoder On/Off'
?
?
Program
Delete
?A lphabet Small: Switches the
Symbols:
then press
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
character then press ENTER to confirm your selection.
?
position
menu
a
case
List
Program
program
delete
2. Use v / V to select 'Delete'
Alphabet Capital:
from
then press ENTER.
Program
Cancel
menu.
1. Use v / V to select
UVWXYZ
OK
List
2. Use v / V to select 'Move'
You
(1.6)
KLMNOPQRST
case
List
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Deleting
6
Alphabet Capital
?
Program
ENTER to store.
ABC
a name
the
1. Use v / V to select
options
2. Use v / V to select 'Station Rename'
3. Enter
on
menu
1. Use v / V to select
Program
sort the
menu.
stations
can name
can
to left
or
List
Auto,
option
from
then press ENTER. If you
'NICAM' appears on the menu screen.
options
right.
the character of correspon-
the selected column.
MENU/LIST, DISPLAY: Switches the keyboard type
(Alphabet Capital, Alphabet Small, Symbols)
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
21
DVRHOKUP
Before
Operation (Continued)
Auto Clock Set
Manual Clock Set
When Channel auto search is
and Date
are
DVD recorder
set
completed the actual Time
automatically. If the time in the
also set
is not correct, the clock must be
display
Follow
steps 1-5
Auto
Clock Set
TV
Manual
TV
Mode
--
/
1
Set
Time
----
--
:
--
3
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the General menu.
3
4
5
6
7
While the General
option
or
Use v / V to select the Clock Set
move
Press SETUP to exit the
option
then press
Setup
menu.
(left/right):
Aspect
You
send,
or
sends wrong date and/or time information and the DVD
Recorder sets the incorrect time.
can
:
--
cursor
to the
previous
the
setting
at the current
choose:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
recommend that you set the clock
Programming
Program
Edit
Clock Set
TV
Aspect
Display Mode
AV1 Decoder
PBC
Factory
22
--
4:3:
Auto
where the TV station does not
we
Moves the
(up/down): Changes
position.
TV
-
ote
happens,
manually.
Time
Press ENTER to confirm your setting, then
to exit the Setup menu.
-
If this
Factory Set
4 press SETUP
option.
ENTER.
are cases
--
to the third level.
Use v / V to select the Auto
There
/
----
next column.
cursor
to the second level.
Press B to
--
Enter the necessary information for date and
b / B
is selected, press B to
PBC
Year
time.
v / V
move
Manual
Date
AV1 Decoder
Year
Factory
then
Auto
Aspect
Display Mode
--
AV1 Decoder
PBC
option
Edit
Auto
Date
Clock
Programming
Program
Clock Set
Display
(Auto
ENTER.
Edit
Aspect
shown above
Use v / V to select the Manual
Programming
Program
as
Set).
2 press
manually.
Auto
1
Set
4:3
16:9
Before
Operation (Continued)
Mode
Display
Factory Set
Mode
Display
works
setting
only
when the TV
Aspect
ratio is set to "4:3".
You
-
can
choose:
Letter Box:
picture with bands on the
portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
Displays
a
wide
upper and lower
-
If you need to, you can reset the recorder to all its factosettings. Select 'SET' icon then press ENTER.
ry
Pan Scan:
ote
Some
options can
Country Code)
not be reset.
(Rating, Password,
DVRHOKUP
and
that do not fit.
Auto
Programming
Program
Auto
Programming
Program
Edit
Clock Set
TV
Edit
Aspect
Mode
Clock Set
Display
TV
AV1 Decoder
Aspect
Display Mode
Letter Box
PBC
AV1 Decoder
Pan Scan
Factory
SET
Set
PBC
Factory Set
Language
AV1 Decoder
Display Language
We have
for
of
already described, how to connect a decoder
pay-TV station on page 16. For viewing or recording
encoded program from EURO AV1 AUDIO/VIDEO
connector, you do not have to control anything. You just
an
select AV1
shortly
by pressing AV button
decoding will start.
source
until the
a
language
for the
Setup
menu
and
on-screen
display.
English
and wait
Deutsch
Choose 'On' if your recorder is connected with
decoder, otherwise leave it set to 'OFF '.
Auto
Select
Italiano
a
Programming
Program
Edit
Clock Set
TV
Aspect
Display Mode
AV1 Decoder
OFF
PBC
ON
Disc
Select
Factory Set
-
Language
language for the disc's Menu, Audio,
Original: The original language set for the
a
and Subtitle.
disc is
selected.
-
PBC
(PBC)
ON:
setting
to ON
or
be
can
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
to the
PBC.
-
To select another
language,
select Other
then press ENTER. Use the numbered
and ENTER buttons to key-in the correspon-
option
The PBC
-
Other:
OFF: Video CDs with PBC
are
played
the
same
way
as
ding 4-digit
number
according
to the lan-
guage code list on page 58. If you a mistake
before pressing ENTER, press b repeatedly
to delete one by one and correct it.
Audio CDs.
Auto
Programming
Program
Edit
Display Menu
Original
Disc Menu
English
Disc Audio
French
Disc Subtitle
German
Clock Set
TV
Spanish
Aspect
Display
Italian
Mode
Chinese
AV1 Decoder
Polish
PBC
OFF
Other----
Factory
Set
ON
23
Before
Operation (Continued)
Audio
Sampling Frequency
Each DVD disc has
a
variety of audio output options.
Output according to the type
Set the recorder's Audio
audio
system you
of
use.
Dolby Digital
PCM: Select when connected to
a 2-channel digital
digital audio outputs
in the PCM 2ch format when you play a DVD video
recorded on the Dolby Digital recording system.
amplifier.
The DVD Recorder's
If your receiver
or
96 kHz
select 48 kHz. When this choice is
signals,
(or
amplifier
Dolby Digital decoder).
an
or
other
equipment
with
is NOT
capable
of
handling
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver
or
96 kHz
select 96 kHz. When this choice is
signals,
amplifier
is
capable
of
handling
stereo
made, this unit will pass each type of signal through
sounds
without any further
processing.
disc
Dolby Digital
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
decoder
amplifier
DTS
MPEG
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
Dolby Digital
PCM
DTS
Bitstream
MPEG
Sampling Freq.
DRC
DRC
(Dynamic Range Control)
Vocal
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
DTS
OFF: If you select "OFF", the DTS
the DIGITAL OUT jack.
signal
is not
output
and the
quietest ones). Then, you may
losing clarity
lower volume without
through
at
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
DRC to ON for this effect.
amplifier
or
other
equipment
with
DTS
a
a
decoder).
listen to
a
movie
of sound. Set
Dolby Digital
DTS
Dolby Digital
MPEG
DTS
OFF
MPEG
Bitstream
Sampling Freq.
Sampling Freq.
DRC
OFF
Vocal
ON
DRC
Vocal
MPEG
Vocal
PCM: Select when connected to
stereo
amplifier.
a
2-channel
The DVD Recorder's
digital
digital
puts sounds in the PCM 2ch format when you play
DVD video disc recorded
on
the MPEG2
Set Vocal to ON
audio outa
only
a
multi-channel karaoke
mix into normal stereo sound.
or
other
equipment
with
a
MPEG
decoder).
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
MPEG
PCM
Sampling Freq.
Bitstream
DRC
Vocal
OFF
ON
DTS
24
when
The karaoke channels
Dolby Digital
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a MPEG decoder (or
amplifier
playing.
recording
system.
an
DVD is
on
the disc will
Before
Lock
Operation (Continued)
If you
(Parental Control)
If you
Set Password
Changing
the
word,
4-digit
forget your password, to clear the current passfollow the procedure below.
1. Press SETUP to
code
code
forget your 4-digit
display
the
Setup
menu.
2. Use the Number buttons to enter the
Set Password
Chang
Rating
Delete
New Password
3. Select "Yes" then press ENTER. The 4-digit password is cleared. Enter a new code as shown left.
Code
Country
number
6-digit
"210499".
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
While the Lock
move
option
Ratings
option.
is selected, press B to
to the second level.
Use v / V to select the Set Password
Press B to
move
are
country-dependent.
alternative
to
or
rated
The Parental Control
being played
played with
scenes.
Set Password
to the third level.
Rating
No Limit
Country Code
8
(Adult)
7
5
When you have not entered a password yet;
Enter a 4-digit password using the numbered but-
4
3
2
a
word, then press ENTER.
1
1
2
Follow
steps 1-3
If you make
repeatedly
a
mistake before
to delete
pressing ENTER,
password numbers one by
press b
one
then correct it.
While
"Change"
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
Use v / V to select the
4-digit password again
verify.
move
Follow
Rating option.
to the third level.
Eight (8)
has the least
has the most
Limit, Parental Control is
play
in full.
Level 1 to 8: Some discs contain
able for children. If you set
and press
unless
lower
mistake before
repeatedly
to delete
not suit-
an
alternative
scene
a
is available
one.
If
no
same
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
press b
pressing ENTER,
password numbers one by
scenes
rating for the recorder,
all disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played
ip
a
restrictions.
playback
No Limit: If you select No
not active. The disc will
restrictions.
The alternative must have the
If you
(Set
6 as shown above to the left
tons. One
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER.
ENTER to
shown above to the left
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
a
Enter the
as
(Kids)
Password).
Press B to
ip
9
disc
scenes are
feature allows you to prevent discs from
by your children or to have certain discs
option.
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass-
8
complete
6
tons to create
7
to the
the disc. These
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
appears.
Use v / V to select the Lock
applies
scenes on
one
then correct it.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
25
DVRHOKUP
Before
Country
Operation (Continued)
Code
Enter the code of
Recording
country/area
a
used to rate the DVD video
Code
(See "Country
whose standards
were
to the list
disc, referring
List", page 59.).
Record Mode Set
You
can set the picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
Set Password
Rating
US
Country Code
Rec
2
3
4
5
6
LQ
Aspect
DV Rec Audio
SQ
TV Rec Audio
HQ
Auto
1
EQ
Rec Mode Set
Chapter
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Lock
While the Lock
move
option
is selected, press B to
to the second level.
Use v / V to select the
Press B to
move
Country
Code
option.
a
personal 4-digit security password,
4-digit password again
then press ENTER. Enter the
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the
personal 4-digit security
2
repeatedly
to delete
appears.
Recording option.
While the
is selected,
Recording option
press
3
Set option.
4
5
6 (HQ, SQ, LQ EQ)
your selection,
7 press
Press B to
move
to the third level.
Use v / V to select
desired Record Mode
a
or
Press ENTER to confirm
SETUP to exit the
then
menu.
Aspect
recording,
or
one
4:3
can set the recording aspect ratio
you're recording (16:9 widescreen,
you
to suit the material
press b
pressing ENTER,
password numbers one by
standard).
then correct it.
Rec Mode Set
7
Select the first character
using
the v / V
Rec
buttons.
Aspect
DV Rec Audio
TV Rec Audio
8
Shift the
cursor
using B buttons and select
using v / V buttons.
the
second character
Press ENTER to confirm your country code
then press SETUP to exit the menu.
9 selection,
26
B
to move to the second level.
When
mistake before
menu
Use v / V to select the
Record
ip
a
Setup
pass-
word, then press ENTER.
If you
The
Use v / V to select the Rec Mode
to the third level.
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
Press SETUP.
1
option.
Auto
Chapter
4:3
16:9
Before
Operation (Continued)
DV Rec Audio
Disc
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
Disc Format
jack.
If you load a completely blank
tialize the disc.
Some
digital
camcorders have two stereo tracks for
shooting; the other
overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
disc, the recorder will ini-
audio. One is recorded at the time of
DVD-R: The recorder initialize the disc to Video mode.
is for
The
be Video mode.
DVD+R: The Initialize menu will appears. Select "Yes"
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
Also, you
Aspect
DV Rec Audio
Audio 1
TV Rec Audio
Audio 2
Auto
always
mode.
Rec Mode Set
Rec
mode will
recording
DVD-RW: The recorder initialize the disc to VR mode.
can
format the disc from the
Setup
menu as
below.
Chapter
Disc Format
Start
Finalize
Disc Label
Disc Protect
TV Rec Audio
When TV
recording
with
bilingual,
you
can
choose
audio channel to record.
Main+Sub: Main
language
language only
language only
and Sub
language
Main: Main
Sub: Sub
Rec Mode Set
Rec
Aspect
DV Rec Audio
TV Rec Audio
Main+Sub
Auto
Main
Chapter
Sub
Auto
Chapter
1
appears.
3
4
5
6
7
While the Disc
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the Disc Format
Press B to
move
Start icon is
option.
to the third level.
highlighted.
Press ENTER.
Disc Format
In case of
menu
appears.
DVD-RW,
Disc Format Mode
use b
(VR
/ B to select
Mode
or
Video
a
desired
Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
15 minutes. If you select None, switch off
chapter marking altogether with the No
minutes,
menu
2
recording, chapter markers are put in specified
setting. You can change this interval to 5 minutes,
10
Setup
Use v / V to select the Disc
When
automatic
Press SETUP.
The
or
Disc Format
Select
a
Mode
Separation setting.
VR Mode
Video Mode
Rec Mode Set
Rec
Aspect
8
DV Rec Audio
TV Rec Audio
Auto
Chapter
None
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
Disc Format
5 Min
All data
10 Min
on
the disc will be deleted.
Proceed?
15 Min
Ok
Cancel
Caution
If you want to change the disc format,
recorded on the disc will be erased.
everything
27
DVRHOKUP
Before
Operation (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
can
MENU/LIST
or
TITLE.
Use this to enter
a name
for the disc. This
name
appears when you load the disc and when you
disc information on-screen.
?
The disc
?
For discs formatted
will
see
display
be up to 32 characters long.
on a different DVD Recorder, you
limited character set.
name can
only
a
Disc Format
Caution
Finalize
?
When
DVD-R, DVD-RW, and DVD+R recording,
you've
finalized
a
disc
record
anything
else
you can't edit
recording,
on
Edit
Disc Label
Disc Protect
or
that disc except
DVD+RW.
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Disc Protect
1
2
Follow
1
steps 1-3
as
shown
on
page 27
(Disc
Format).
2
Use v / V to select the Finalize
3
4
Press B to
Follow
steps 1-3
as
shown Disc Format
Use v / V to select the Disc Label
Press B to
move
Edit icon is
highlighted.
3
4 Keyboard
Finalize is
menu
option.
appears.
DVD-RW
to the third level.
highlighted.
menu
option.
Press ENTER.
6
(1.6)
123456789
0
ABCDEFGH
J
I
KLMNOPQRST
Press ENTER.
Finalize
page
to the third level.
Alphabet Capital
move
on
27.
UVWXYZ
appears.
OK
Finalize
Cancel
Delete
Space
Do you want finalization?
Ok
5
Cancel
Select Ok then press ENTER.
5
The recorder starts
finalizing
6
long
finalization takes
how much is recorded
titles
on
utes
or more
on
on the type of disc,
disc, and the number of
depends
the
the disc. A disc recorded
can
take up to 8 min-
a name
for the disc. Use vVbBto select
character then press ENTER to confirm your
selection. Refer step 3 as shown on page 21
(Station Rename).
the disc.
ote
How
Enter
a
7
Choose OK then press ENTER to fix the
and return to the
Setup
name
menu.
Press SETUP to exit the
menu.
to finalize.
Disc Protect
When
ip
recording
in DVD+RW / +R disc
If you load a DVD-RW or DVD+RW that has already
been finalized, you can 'unfinalize' it by choosing
matted DVD-RW
Unfinalize from the Finalize
need to unlock the disc to make
can
menu.
After
doing this, you
recording, editing
disc,
or
set to ON to
deleting
Disc Format
Finalize
Disc Label
OFF
ON
28
VR mode for-
of the disc loaded. If you
edits, select OFF.
edit and re-record onto the disc.
Disc Protect
or
prevent accidental
Before
Operation
General
Explanation
On-Screen Display
This manual
of
or
is not available
Displaying
various information about the disc
on-screen
on-screen.
basic instructions for
DVD Recorder. Some DVDs
Recorder
Disc Information
display
can
loaded
operating the
require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
gives
Displaying
You
on
the disc.
Information While
Watching
TV
During viewing the TV, press ENTER or DISPLAY
display/remove the information displayed
1
2
Press DISPLAY
information
To
the
the on-screen display, press
repeatedly until it disappears.
See the descriptions on next pages for detailed
explanation during playing a disc.
remove
DISPLAY
Temporary
Feedback Field Icons
to
Resume
Action
on-screen.
repeatedly to display/change
displayed on-screen.
play
from this
prohibited
or
point
not available
e.g., when DVD-RW in VR mode is inserted.
otes
Indicates channel
audio
number,
station name, and
signal (NICAM, STEREO, MONO)
received by the tuner.
Indicates the record
Some discs may not
provide all of the features on the
display example shown on next pages.
If no button is pressed for 20 seconds, the on-screen
display disappears.
on-screen
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
DVD-RW
PR-06
VR Mode
SQ
1H 32M Free
N STEREO
ABC
28/8/2003 11:35
Indicates current date and time.
29
DVRHOKUP
Before
Operation
Disc Information
Displaying
on-screen
DVD
(Continued)
Shows the
elapsed playing
time
and total time.
Shows the current
title/chapter
number
Shows the Current
TITLE: 1/4
and total number of
CHAPTER: 3/28
0:06:32
/
mode.
2:12:10
titles/chapters.
Menu
Function (Use v / V to select desired option)
Options
Shows the current title number and total number of
Title Number
1/6
Chapter
Number
4/26
Time search
0:10:30
Audio
language
Digital Audio
Output mode
1.
and
Subtitle
ENG
D 5.1CH
titles, and skips
ABC
Angle
OFF
1/3
Sound
3D SUR.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
language
to the desired title number.
Selection Method
the
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
elapsed playing
b/B
b/B
setting.
Shows the
VCD
b/B
setting.
time
and total time.
Shows the current track
number and total number
of
tracks,
or
TRACK
shows PBC
:
Shows the Current
1/17
0:06:32
/
1:00:00
mode.
On mode.
Menu
Function (Use v / V to select desired option)
Options
Track Number
1/4
Time
Audio Channel
Sound
30
0:10:30
STEREO
3D SUR.
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only).
Shows the audio channel, and
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
Selection Method
b/B,or
Numbers, ENTER
--
b/B
b/B
Before
Operation
Displaying
Disc Information
on-screen
(Continued)
Shows the
VR
elapsed playing
time
and total time.
Shows the title name,
recording date,
recording mode, etc.
ORG: Original
PList: Playlist
Menu
20/08
1/6
Number
4/26
Time search
0:10:30
Digital Audio
Output mode
1. STEREO
D 2CH
language
ABC
Sound
OFF
3D SUR.
+RW
Video
SQ
/
mode.
2:12:10
Shows the current title number and total number of
Title Number
Subtitle
ORG
0:06:32
Function (Use v / V to select desired option)
Options
Chapter
Shows the Current
TITLE
titles, and skips
to the desired title number.
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
b/B
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current sound mode, and
changes
the
Shows the
+R
b/B
setting.
elapsed playing
time
and total time.
Shows the title name,
recording date,
recording mode, etc.
Menu
20/08
1/6
Number
4/26
Time search
0:10:30
Digital Audio
Output mode
1. STEREO
D 2CH
language
ABC
Angle
(Video
Mode
/
mode.
2:12:10
Shows the current title number and total number of
Title Number
Subtitle
0:06:32
SQ
Function (Use v / V to select desired option)
Options
Chapter
Shows the Current
TITLE
only)
OFF
1/1
Sound
3D SUR.
titles, and skips
to the desired title number.
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
Shows the current subtitles language, and
changes
the
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
setting.
b/B
b/B
b/B
b/B
31
DVRHOKUP
with DVD and Video CD
Operation
Playing
DVD
a
or
Video CD
DVD
Playback Setup
Turn the TV
on
and select the video
input
source con-
nected to the DVD Recorder.
Audio
the
1
system: Turn the audio system
input
source
on
When
(Z)
tray.
Press OPEN/CLOSE
READING appears
starts
playback
start, press N
In
some
cases,
(Z)
to close the
tray.
The
is
DVD
or
loading
want to
view, then press ENTER
Press TITLE
or
title/chapter
playback.
you
b / B to select
VR
Video
a
Use the number buttons to select the track you want
to view.
to return to the
title
on a
menu screen.
menu screen.
You may also set PBC to OFF under
See page 23.
Setup
disc has
VR
Video
(m
menu.
3
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Rating",
--
page 25).
DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this recorder is 2 (two).
one
chapter/track,
DVD
VCD
M) during playback.
go into SEARCH mode.
Frame-by-Frame Playback
VR
Video
1 Press PAUSE/STEP
The recorder will
can
frame
a
+R
(m or M) to select the required
(Reverse play), mX2, mX4, mX8,
mX16, mX100 (backward) or MX2, MX4,
MX8, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To exit SEARCH mode, press N (PLAY).
2 You
region
region code
than
VCD
b
Still Picture and
If Parental Control is set and the disc is not within the
+RW
or
now
otes
--
more
+R
of the current
speed:
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
+RW
2 Press SCAN
and the exact
using
title number.
1/4
The recorder will
(O)
a
to another CHAPTER/TRACK
1 Press SCAN
setting
v / V to select the title
or
DVD
VCD
Press RETURN
use
Search
menu
screen.
Menu
to
chapter/track or to return to the beginchapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
a
to start
MENU/LIST to return to the
can move
(0-9)
ning
DVD
Use the bBvVbuttons to select the
title, you
select the next
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
one
follows:
you can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
ip
a menu screen
than
+R
Then, press the appropriate numbered button
When
the
instead.
If
more
1/6
icon.
DVD
display window, and
automatically. If playback does not
(PLAY).
the disc menu might appear
on
as
4/26
your
2 playback
3
disc has
Moving
chosen disc in the tray, with the
side down.
Load
a
+RW
Press DISPLAY then
and select
to open the disc
VR
Video
another title
connected to the DVD Recorder.
Press OPEN/CLOSE
to another TITLE
Moving
+RW
+R
VCD
(X) during playback.
go into PAUSE mode.
back up the picture frame-by-
now
advance
by pressing
or
b / B
repeatedly during
PAUSE
mode.
for
3 To exit PAUSE
mode, press N (PLAY).
ote
General Features
The
picture frame-by-frame
in
reverse
is not available
for Video CD.
ote
Unless stated
otherwise, all operations described
use
the remote control. Some features may also be available on the Setup menu.
32
ip
You
ing
can
advance the
PAUSE/STEP
picture frame-by-frame by
(X) repeatedly on the remote
presscontrol.
with DVD and Video CD
Operation
General Features
(Continued)
Video CDs
(Continued)
Slow Motion
DVD
VR
Video
+RW
1 Press PAUSE/STEP
The recorder will
2 Press SCAN
+R
4
?
All:
repeats
repeats the all tracks
?
OFF:
does not
VCD
to select the
(m
M)
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
To exit Slow Motion mode, press N (PLAY).
or
On
a
the
Setup
Video CD with
menu
in
reverse
is not
possible
the disc.
Repeat
A-B
to
PBC, you
use
the
must set PBC to OFF in
Repeat
function. See page
23.
DVD
To
A-B
VR
Video
repeat
Repeat
ote
playback
on
play repeatedly.
a
+RW
sequence in
a
+R
VCD
title:
1 Press A-B at your chosen
Slow motion
repeat mode.
the current track.
ote
go into PAUSE mode.
M) during PAUSE mode.
The DVD Recorder will enter SLOW mode.
3 Use the SCAN
desired
a
Track:
(X) during playback.
or
Track/All/Off
Repeat
?
now
(m
-
Press REPEAT to select
starting point.
icon and 'A-' appears
on
the TV
screen.
2 Press A-B
with
Repeat
Video CDs.
again at your chosen end point.
icon and 'A-B' appears on the TV screen, and the
repeat sequence begins.
Random
Karaoke DVD
3 To cancel the sequence, press A-B
select OFF.
VCD
repeatedly
to
1 Press RANDOM
The unit
during playback.
automatically begins Random Playback
"RANDOM" appears
2 To return to normal
and
screen.
press RANDOM until
the TV screen.
playback,
"NORMAL" appears
ip
By pressing
the TV
on
on
Time Search
DVD
during Random playback, the
title (track) and resumes Random
playback.
display
appears
This function
works with DVD Karaoke discs
only
or
video CDs without PBC.
Video CD with
during playback.
the TV
The
playing
at
on-screen
screen.
The Time Search box shows the
elapsed playing
time of the
seconds,
Setup
menu
to
use
must set PBC to OFF
the Random function. See
the
seconds,
required
v / V to select the Time
can
use
display.
the number buttons to enter
start time. Enter
onds from left to
You
Repeat
use
on-screen
The "0:00:00" appears in the Time Search box.
3 Within 20
PBC, you
page 23.
not enter
right
an
hours, minutes, and
sec-
in the box.
invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
Chapter
numbers.
Video
DVD Discs
-
VR
+RW
+R
VCD
Repeat Chapter/Title/All/Off
Press REPEAT to select
?
on
Search icon in the
DVD
+R
The Time Search function allows you to start
any chosen time on the disc.
2 Within 20
in the
+RW
current disc.
ote
a
VR
Video
1 Press DISPLAY twice
SKIP >
unit selects another
On
0:10:30
Chapter: repeats
a
desired
the current
4 Within 20
seconds, press ENTER
to confirm the start
time.
Playback
starts from the selected time
on
the disc.
repeat mode.
chapter.
?
Title:
?
All:
repeats the current title
repeats the all titles on the disc.
?
OFF:
does not
.
(VR
mode DVD-RW disc
only)
play repeatedly.
33
PLAYBCK
Operation
with DVD and Video CD
General Features
(Continued)
3
(continued)
Press CLEAR.
"Delete selected marker? Proceed?" message appears.
Zoom
4
Use b / B to select "Yes" then press ENTER.
DVD
5
Repeat steps
6
To
VR
Video
+RW
+R
VCD
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
during playback
or
still
playback
to acti-
vate the Zoom function.
Each press of the ZOOM button changes the TV screen in
the sequence shown below.
x1 size → x2 size → x4 size → x1 size (normal size)
2 Use the bBvVbuttons to
zoomed
3 To
normal
resume
ZOOM
the
through
move
picture.
repeatedly
playback, press CLEAR or press
until the normal picture appears.
ote
the Contents of DVD Video
Checking
Discs: Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
to select
an
highlight
your selection, then press ENTER.
option. Or,
Marker Search
DVD
six
can
DVDs.
some
1
the bBvVbuttons to
DVD
If the current title has
start
playback
a
+RW
from
a
a
menu, the
Otherwise, the disc
menu
menu
menu may contain camera
guage and subtitle options, and
+R
VCD
memorized
point. Up
to
be memorized.
can
screen.
2 The
1/6
VR
Video
points
To enter
use
1 Press TITLE.
function may not work for
zoom
TV
You
scene.
(O).
Title Menu
The
additional Marked
erase
the Marker Search menu, press
remove
RETURN
2-4 to
mark, follow these steps.
will appear
on
the
may appear.
angles, spoken lanchapters for the title.
DVD
Disc Menu
1 Press MENU/LIST.
The disc
During disc playback, press MARKER when
playback reaches the spot that you want to
2 To
menu
remove
is
displayed.
the disc menu, press MENU/LIST
again.
memorize.
The Marker icon will appear
2
on
the TV
screen
1 to enter up to six Marker
Repeat step
briefly.
points
Camera
If the disc contains
disc.
To Recall
1
During
Marked Scene
a
disc
playback,
The Marker Search
press SEARCH.
menu
will appear
the TV
on
screen.
Marked
a
Playback
RETURN
a
different
camera
angle
camera
Press ANGLE then press b / B repeatedly
to select a desired angle.
The number of the current
angle
during
appears
the TV
on
screen.
ip
The ANGLE indicator will blink
will start from the Marked
remove
recorded at different
to
playback
scene
that you want to recall.
3 Press ENTER.
DVD
1/3
scenes
angles, you can change
during playback.
2 Use the bBvVbuttons to select
4 To
Angle
on a
recorded at different
scene.
the Marker Search menu, press
angles
the TV
on
screen
to indicate that
at
scenes
angle switching
is
possible.
(O).
Changing
Marker Search
1.
the Audio Soundtrack
ENG
DVD
D 5.1CH
Press AUDIO then press b / B repeatedly during playa different audio language or audio sound-
back to hear
track if available.
Move
To clear
a
Select
Delete
Close
tracks. There is
during playback
The Marker Search
menu
or
will appear
34
erase.
in
on
Use bBvVto select the Marked
want to
ote
Some discs feature both
Marked Scene
1 Press SEARCH
2
CLEAR
stop mode.
the TV
scene
screen.
that you
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
recorder to
a
soundtrack,
DTS decoder via
puts. See page
one
of the
17 for connection details.
connect this
digital
out-
with DVD and Video CD
Operation
the Audio Channel
Changing
(Continued)
Last Condition
DVD
STEREO
VCD
With
VR
Video
a
Video
CD,
+RW
+RW
This recorder memorizes the
+R
+R
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or switch
press AUDIO then press b / B
playback to hear a different audio
repeatedly during
channel (STEREO,
Memory
VR
Video
With DVD-RW discs recorded in VR mode that have
off the recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
both
recalled.
or
RIGHT).
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.
a
main and
LEFT
a
otes
--
--
3D Surround
DVD
VR
Video
This unit
can
3D SUR.
produce
+RW
a
+R
3D Surround
effect, which
playback
conventional stereo
instead of the five
speakers,
speakers normally required
more
channel audio from
a
DVD
(Picture
DVD
in
Picture)
VR
Video
to
VCD
+RW
+R
repeatedly during
This function enables you to view the stored stations in
sub picture during playback.
effect, select "NORMAL".
OFF
ABC
VR
Video
or
system.
1 Press 3D SURR. then press b / B
playback to select "3D SUR.".
Subtitles
PIP
from two
commencing
to listen to multi-
home theater
2 To turn off the 3D Surround
you switch off the recorder before
play it.
VCD
simulates multi-channel audio
Settings are stored in memory for use any time.
This recorder does not memorize settings of a disc if
+RW
+R
Press SUBTITLE then press b / B repeatedly during
to see the different subtitle languages.
playback
Instant
DVD
Skip
VR
Video
+RW
Each press INSTANT SKIP
+R
skips
forward 15 seconds.
Press PIP to switch
ton
ote
If
On and off
appears, the feature is not available
on
the disc.
Input
again
on
the sub
picture,
press this but-
to switch it off.
mode selection for sub
picture
input mode for the sub picture.
Each time this button is pressed, each input mode for
the sub picture is displayed as shown below.
Press AV to select the
Finding
You
Locations
on a
Disc
VCD
video CD
directly
any point
this function. Use this function only while
can
access
playing. Playback jumps
1 Press SEARCH
on a
to the
a
using
video CD is
point specified.
Program
on
the TV
screen.
33%
TRK 1
33%
a
start
position
for
starts from the selected
playback.
position.
position.
by pressing
STOP
(x).
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
ote
This function works
ed program
change
Press b / B
3 Press ENTER to confirm the selected
Playback
picture
the program when sub picture's
input is set to tuner. The selected program number is
displayed on the TV screen. You can view the select-
PBC
2 Use b / B to find
selection for sub
Use v / V to
during playback.
The progress bar appears
Tuner→AV1→AV2→AV3→AV4
only
when
no
marker is memorized.
the
35
PLAYBCK
Audio CD and MP3
Playing
an
Audio CD
Operation
MP3 Disc
or
MP3
CD
Music
1.
To
display
the
The DVD Recorder
Recorder
can
play
CD-ROM, CD-R
Before
1
Insert
or
MP3
playing
Recordings on
play
can
audio CDs.
MP3 formatted
Also, the DVD
recordings
2.
on
CD-RW disc.
recordings,
read the notes
on
options
menu
Music-Audio CD
disc and close the tray.
AUDIO CD or MP3 CD menu appears
the TV
on
a
tack
(or folder)
on
Program
Starts
CD
options
playback
the selected
track.
Add
Program Add: Adds the track(s)
Program List. (page 38)
to
Music
Title
0:52:16
Duration
-MP3CD
04:47
FILE
TRACK 2
04:01
FILE
TRACK 3
03:01
TRACK 4
03:30
TRACK 5
04:24
FILE
TRACK 6
05:01
FILE
TRACK 7
03:48
FILE
TRACK 8
04:09
FILE
TRACK 9
05:10
FILE
TRACK 10
FILE
00:00
FILE
FILE
04:11
MARKER Mark
LIST
Close
Program
152 Items
FOLDER 01
TRACK 1
Select
1.mp3
2.mp3
3.mp3
Music-MP3 CD
4.mp3
5.mp3
6.mp3
?
7.mp3
8.mp3
9.mp3
10.mp3
Select
AUDIO CD Menu
MARKER Mark
LIST
Program
Close
MP3 CD Menu
When you select
Program
2Usev/Vtoselectatrackthenpress
(PLAY).
Playback starts.
During playback,
Add
view TV channel
by pressing
or
video
input
source
AV. If you want to return to the Music
menu, press MENU/LIST.
You can switch between the Track List and
Program
List
menus
by pressing
Folder:
MENU/LIST.
Folder
View All
Add
(audio tracks,
files and JPEG
MP3
files), you can select among the
Music-Audio CD menu, Music-MP3 CD menu,
and Photo CD menu by pressing TITLE repeatedly.
at any other
Displays
Program
all MP3 files
time, press
Add: Adds all
the folder to
Folder:
the disc.
(x).
on
on
folder.
On CDs with mixed content
stop playback
the folder list
Open: Displays sub-folders
MP3 files only in the folder.
Open
Program
a
the disc.
STOP
Displays
to
the disc.
On the Music-MP3 CD menu, press SCAN (m
or M) to move to the previous or next page.
To
the selected
menu.
ips
can
playback
Program Add: Adds the track(s)
Program List. (page 38)
?W hen you select
You
Starts
the disc.
elapsed playing
time will appear on the display window and
Playback will stop at the end of the disc.
MP3
track.
View All:
the current track's
options
track.
View All
N
a
menu
Play:
Play
Folder
36
select
menu
Play:
Play
a
Music
Audio CD
3
options,
then press ENTER.
Use v / V to select an option then press ENTER to
confirm your selection.
menu
MP3
page 37.
screen.
-
menu
Program
Displays
View All:
and
track(s) in
(page 38)
List.
the folder list
Displays
on
all MP3 files
on
Audio CD and MP3
Pause
Search
MP3
CD
1 Press PAUSE/STEP
playback, press
PAUSE/STEP (X) again.
N
(PLAY)
or
press
MP3
CD
briefly during
playback to go to the next track
beginning of the current track.
Press SKIP . twice
an
Audio
CD,
briefly
track number
ing playback
to go
to
or
directly
step
to any
track,
enter the
dur-
(0-9)
?
?
?
indicated
on
the
menu
mode, press N (PLAY).
A-B
Repeat
To
repeat
CD
sequence in
a
a
track:
1 Press A-B at your chosen start
MP3
CD
Repeat Track/All(Folder)/Off
icon and 'A' appears
on
point.
the
menu screen.
2 Press A-B
again at your chosen end point.
The Repeat icon and 'A B' appears on the menu screen,
and the repeat sequence begins.
-
desired
mode.
repeat
repeats the current track.
ALL (CD): repeats the all tracks on the disc.
FOLDER (MP3): repeats the all tracks in the
a
are
back to the pre-
Repeat
Press REPEAT to select
and direction
3 To exit SEARCH
the Track List.
on
speed
to return to the
the numbered buttons
using
M) during playback.
go into SEARCH mode.
screen.
vious track.
On
or
now
(m or M) to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
Search
>
or
(m
The recorder will
2 Press SCAN
to Another Track
Press SKIP .
CD
1 Press SCAN
(X) during playback.
2 To return to
Moving
Operation (Continued)
TRACK:
current
3 To exit the sequence and return to normal
A-B again.
The
Repeat
icon
disappears
from the
play,
press
menu screen.
folder.
?
OFF
does not
(No display):
Random
play repeatedly.
Notes
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
on
the
MPEG1 audio
files that have
menu screen.
The recorder
2 To return to normal
edly
until
playback, press RANDOM repeat"RANDOM" disappears from the menu
screen.
ip
By pressing
during
Random
playback,
the
unit selects another track and
resumes
Random
play-
compatibility
limited
follows:
as
CD-R
physical
an
MP3 file that has
file
a
".mp3".
with this recorder is
format should be "ISO 9660" and
"JOLIET".
2.
If you record MP3 files using the software which
a FILE SYSTEM, for example "Direct-
cannot create
3D Surround
This unit
can
produce
a
CD" etc., it is impossible to playback MP3 files. We
recommend that you use "Easy-CD Creator", which
MP3
CD
3D Surround
simulates multi-channel audio
effect, which
playback
from two
conventional stereo
five
more
multi-
speakers, instead of the
speakers normally required to listen to
channel audio from
1 Press 3D SURR.
a
home theater
during playback
until "3D SUR"
Changing
disappears
system.
to select "3D SUR".
effect, press 3D SURR.
from the menu screen.
the Audio Channel
(stereo,
an
ISO9660
or
JOLIET file
Total number of files and folders
This DVD Recorder
repeatedly
or right).
left
a
different audio chan-
the disc should
requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
are
are
optimal
automatically
many different types
of recordable disc formats
files) that
(see above) to
(including CD-R containing
require certain pre-existing conditions
insure compatible playback.
Customers should also note that
to hear
system.
on
be less than 999.
MP3
MP3
Press AUDIO
creates
3.
or
2 To turn off the 3D Surround
nel
not read
can
MP3 Disc
back.
CD
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
1.
SKIP >
Recordings
An MP3 file is audio data
1 Press RANDOM
The unit
MP3
About MP3
MP3
CD
on
required
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
sought
from the
copyright
owner.
37
PLAYBCK
Programmed Playback
with Audio CD and MP3
The
Program function enables you to store your favorite
tracks from any disc in the recorder memory.
Program can contain 99 tracks (Audio CD) or 256
tracks
1
2
(MP3).
Insert
Audio CD
an
Audio CD
MP3 CD
or
menu
Use v / V to select
will appear.
track
a
Play: Playback begins in the order
in which you programmed the tracks
Move
from the selected track.
track(s)
to
change
the program order.
Delete All
Delete: Deletes the
(or folder).
the
List
Program
track(s)
from
menu.
Delete All: Deletes all tracks from
tracks
Selecting multiple
the
(folders)
List
Program
menu.
Press MARKER.
1.
A check mark appears on the track or folder. Press
MARKER again to cancel the marked track or folder.
2.
1 to mark additional tracks
Repeat step
Repeat Programmed
Press REPEAT
3
Press ENTER.
The
options
the left side of the
on
4 then press
Repeat steps
can
List
menus
OFF
2-4 to
place
additional tracks
display Program
List
switch between the Track List and
by pressing
on
1.
menu.
Duration
Title
-MP3CD
Track from the
play repeatedly.
Program
erase
Use the MARKER button to select
2.
List
from the
Program
multiple
tracks.
Press ENTER.
menu
options
appear
on
the left side of the
04:24
TRACK 2
04:01
TRACK 8
04:09
TRACK 4
03:30
TRACK 1
04:47
FILE
TRACK 10
04:11
FILE
TRACK 7
03:48
FILE
TRACK 6
05:01
FILE
TRACK 3
03:01
FILE
TRACK 9
FILE
00:00
05:10
MARKER Mark
LIST
Program
FILE
FILE
Close
menu.
152 Items
Program List
FILE 20.mp3
FILE 3.mp3
TRACK 5
Select
3.
9.mp3
2.mp3
14.mp3
8.mp3
5.mp3
10.mp3
13.mp3
7.mp3
Select
MARKER Mark
LIST
Select 'Delete' option then press ENTER.
The selected track is deleted from the Program List.
ip
Close
Program
Use "Delete All"
7
a
Music
Music
0:52:16
to select
ip
Program
MENU/LIST.
a
does not
Select the track you wish to
List.
The
Audio CD
(No display):
option
Erasing
Press MENU/LIST to
You
"Program
Add"
ENTER.
5 the Program list.
6
menu.
?
Use v / V to select the
repeatedly during playback
repeat mode.
TRACK: repeats the current track.
ALL : repeats the all tracks on the Program list.
?
appear
Tracks
desired
(folders).
?
-
Move: Moves the
Delete
MP3 disc.
or
Play
Use v / V to select the track you want to start
playing on the Program List menu.
Changing
1.
option
to delete all tracks.
Track Order in the
Select the track you wish to
Program
List
move.
ip
On the Music-MP3 CD menu, press SCAN
M) to move to the previous or next page.
(m
ip
or
Use the MARKER button to select
2.
Press N
(PLAY).
8 Playback begins
grammed
Playback stops after playing
track on the Program List.
the last
tracks.
Press ENTER.
The
in the order in which you prothe tracks.
multiple
menu
options
appear
on
the left side of the
menu.
programmed
3.
Select 'Move'
A
4.
yellow
option then press ENTER.
bar appears in the Program List.
Use v / V to
the
move
yellow
bar to the desired
location, then press ENTER.
Program
1.
List
menu
options
To
MP3
CD
display menu options, select a tack on
Program List menu then press ENTER.
The menu options appear on the left side
the
Use v / V to select
an
confirm your selection.
38
option
Save Your
Program
List
This recorder
of the
menu.
2.
The selected track is moved.
then press ENTER to
MP3
memorizes the
user proautomatically
gram list for the disc that you have programmed.
Program list remains in memory even if you remove the
disc from the recorder
load
or
switch the recorder off. If you
memorized, the pro-
disc that has its program list
gram list is automatically recalled.
a
JPEG Disc
Viewing
a
Operation
JPEG Disc
can play discs with
playing JPEG recordings,
Recordings" at right.
5
JPEG
The recorder
JPEG files.
Before
read "Notes
1
Insert
a
on
JPEG
To
disc and close the tray.
menu appears on the TV
menu
viewing
a
screen.
Rotate
Photo
Folder 06
Select
Folder 01
Folder 02
Folder 04
Folder 05
Folder 07
Folder 08
MARKER Mark
or
(.
or >) once
previous file.
return to the
Images
clockwise
Folder 03
press SKIP
picture,
to advance to the next file
Use v / V while
JPEG
reappears.
Skip Images
While
The Photo
time, press STOP.
at any
stop viewing
The Photo
or
viewing
to
picture
a
flip
the
picture
counterclockwise.
View Slide Shows
1. Select "Slide Show"
option
on
the Photo
menu.
2. Press ENTER.
The Slide Show
Close
menu
appears.
Slide Show
2
Use vVbB to select
folder, then press ENTER.
A list of files in the selected folder appears.
a
Object
All
Speed
Normal
JPEG
Photo
Start
Cancel
3. Use vVbB to set the
Object:
Speed:
Normal,
Select
MARKER Mark
Selected file
Sets the
speed
options.
All files.
for Slide Show
(Slow,
Fast)
or
4. Select the Start
Close
or
option
then press ENTER to start the
Slide Show.
ote
5. Press STOP to
If the
icon
cannot
in the Photo menu, it
those JPEG files.
see
displays
means
you
the Photo
stop the Slide Show and
returns to
menu.
ote
3
Use vVbB to select
The
options
appear
on
file, then press ENTER.
a
the left side of the
menu.
Notes
ip
If you
list,
are
use
the
You
Use the MARKER button to select
can
pressing
in
a
file list and want to return to the Folder
the v / V buttons
on
the remote to
icon and press ENTER.
view TV channel or video
input
highlight
source
by
AV. If you want to return to the Photo menu,
press MENU/LIST.
On the Photo menu, press SKIP (.
move to the previous or next page.
On CDs with mixed content
and JPEG
>)
to
(audio tracks,
MP3 files
select among the AUDIO
files), you
CD menu, MP3 CD menu, and Photo CD menu by
pressing TITLE repeatedlyin Stop mode.
4 press
JPEG
option
ENTER.
then
---
pixels
and burn another disc.
The total number of files and folders
on
are
free but the
the folder should be less than
999.
Some discs may be incompatible due to different
recording formats or the condition of the discs.
When you are using software such as "Easy CD
Creator" to burn JPEG files on a CD-R, ensure that all
selected files have the
them
copying
File
as
".jpg"
names
are
shown
or
".jpeg" extension
layout.
".jpe" extensions, please
".jpeg" files.
rename
or
without the
as
".jpg"
them into the CD
cannot be read
03.jpg
files, it
reduce the resolution of the JPEG files to less than 4
If the files have
4/20
Recordings
may take several minutes for the recorder to read the
disc's content. If you don't see an on-screen display
after several minutes, some of the files are too big
before
File
files.
the size and number of JPEG
on
total number of files
can
Use v / V to select "Full View"
Depending
mega
or
on
multiple
by
this
JPEG
".jpg"
or
recorder,
image
".jpeg"
even
extension
though
the files
files in Windows
Explorer .
90
90
Stop
Hide
39
PLAYBCK
Basic
Basic
Recording
from
Recording
To record
TV
a
Follow the instructions below to record
or
you
the
stop
Switch
1
a TV program.
and continues until the disc is full
starts
Recording
immediately
recording.
the recorder and load
on
Also make
that the TV
sure
a
If you load a completely blank disc, the recorder takes
short while to initialize the disc.
2
Set
a
REC
watching
1
Press TV/DVD to select the TV mode
2
ing. The TV indicator appears.
Using the TV, select the channel
during
record-
to be viewed.
recordable disc.
is set to this recorder.
input
TV program while
one
another
a
Instant Timer
Instant Timer
recording mode as necessary by pressing
MODE repeatedly. (HQ, SQ, LQ, EQ)
easily
of
Recording
Recording
allows you to make
a
recording
preset length without using the program
a
timer.
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
EQ: Extended
3
can
Stereo
during viewing
channel is displayed
or mono
For TV
with
recording
(see
page
by
→
bilingual,
→
Left
Main
→
→
Right
record either NICAM
can
setting (page 21)
then if the broadcast is
to NICAM and you
NICAM audio. If the broadcast is
65Min Free
Stereo, you
(Left
or
always
or
regular
is set to
Auto,
can
record the
non-NICAM, the reg-
recorded.
If NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the program.
Press REC
(z)
once.
Recording will start. (The
display window.)
Recording
REC indicator
continues until you press STOP
lights
in the
(x)
the
or
disc is full.
To record for
Recording
a
on
Press STOP
fixed
length
of
time,
see
Checking
to
the
once
recalled
will
screen
(z)
setting
for
a
to check the
automatically
recording
time. The
return to the TV
moment.
Also, remaining time of recording is shown in the dis-
play
window.
To Extend the
Recording
Time
The
recording time can be extended anytime by
ing REC (z).
Each subsequent press increases the recording
presstime
by
10 minutes within free space.
Instant Timer
Caution
stop recording.
If the recorder is
unplugged (or
recording,
while the recorder is
lost.
Recording
Press PAUSE/STEP
Time
Recording
Press REC
right.
(x)
To Pause the
(X)
to pause the disc
during
recording.
When you want to continue
PAUSE/STEP (X).
40
screen.
Continue
Setup
NICAM, the audio automati-
cally changes
2
the TV
stop recording and shut off.
27).
audio. If the NICAM
1
on
the DVD Recorder will
Instant Timer Record Menu
This recorder
ular audio is
recording,
set audio channel
Right).
5
(Basic Recording
time
At the end of the
Sub
If the sound is of poor quality when set to
often improve it by changing to Mono
4
shown left
The
can
?
as
minutes within free space.
recording time is displayed
cur-
on-screen.
from the TV Rec Audio in sub-menu of the
menu
to listen
(language)
TV program. The
broadcat: Stereo
broadcat: Main+Sub
Bilingual
TV).
(z) repeatedly to select the recordlength.
Recording starts after the first press. Each subsequent press increases the recording time by 10
TV Audio Channel
AUDIO
rent audio
steps 1-4
a
Press REC
select the audio channel
pressing
Follow
from
2 ing
Changing
?
1
record.
You
?
Quality
Use v / V buttons to select the TV channel to
recording,
press
there is
the
a
power failure)
will be
recording
Timer
Recording
This DVD Recorder
be
can
to record up to
programmed
7 programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
the
recorded,
1
time and
starting
Press ENTER, the program will be memorized
the DVD Recorder.
3 by
To check the
length.
Press TIMER REC.
The Timer Record
indicates that the timer
will appear.
menu
Timer Record
SQ
PR
Date
Start Time
05
9/5 Fr
19:20
Length
correctly
198Min Free
Mode
Repeat
PDC
SQ
Once
Off
----
4
?
PR
Choose
--
one
Close
memorized program number, or
inputs from which to record.
a
Choose
Date
?
Start Time
?
Length
?
Mode
EQ,
--
--
Set the
--
Choose
--
date up to 1 month in advance.
a
Set the
start time.
recording length.
record mode
a
AT).
(Auto) mode
recording
sary, to
?
is
programmed
and recordable disc inserted.
Press RETURN
(O)
to exit the
Program
List.
(HQ, SQ, LQ,
otes
lights in the display window when
standby with the timer active.
For TV recording with bilingual, set audio channel
from the TV Rec Audio in sub-menu of the Setup
menu (see page 27).
?You must press POWER to stop the timer recording.
?
The timer indicator
the recorder is in
?
or
determines how much disc time
is available and switches record
?
the Timer Record List
recording
Make sure that you load a recordable disc and
POWER to switch your unit to Standby.
of the external
?
AT
Timer Rec List
TIMER REC
on
the Timer Record List
5 press
C50
Enter
programming,
will appear.
Check field's "Rec. OK"
complete recording
Repeat
(Monday
Choose
--
PDC
--
a
Friday),
-
The PDC
time
desired
or
mode, if
neces-
the program.
repeat (Once, Daily
Weekly).
system automatically adjusts the
that even if a program is not
recording
running to schedule, you won't miss it. For PDC
to work properly, you must input the correct
so
announced time and date of the program you
want to record.
Note that PDC may not work with every station.
otes
?
Stations that
use
PDC
typically include PDC
guide pages.
pages when setting a
information in the teletext TV
Please refer to these
timer
?
recording.
This recorder takes
to switch
on
that when
where the
approximately 20
recording. This
and start
using PDC, there may be
beginning of the program
seconds
means
instances
is not
recorded.
Enter the
necessary
2 recording(s).
?
b / B
?
v / V
?
information for your timer
(left/right) move the cursor left/right
(up/down) change the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
--
menu.
?
Press ENTER after
filling
in all the program infor-
mation.
?
Press TIMER REC to
display
Timer Record List.
41
RECODING
Timer
Recording (Continued)
Checking
Timer
Programming
can
Details
Recording
be checked whenever the DVD
Recorder is turned
Press TIMER REC twice.
on.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
timer
a
recording.
Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
PR
Date
Start Time
Length
Mode
PDC
Check
5
10/4 Sa
19:20
30M
LQ
Off
Rec. OK
5
10/6 Sa
19:20
50M
HQ
Off
Rec. OK
Edit
Canceling
You
can
clear
a
a
Delete
CLEAR
TIMER REC
Timer
timer
Timer Rec
Close
Recording
setting anytime
before the record-
starts.
ing actually
Usev/Vtoselectaprogramyouwanttoeraseon
?
the Timer Recorder List. If you want to
program, press CLEAR.
Timer
Stopping
a
After
recording
a
timer
in
Recording
has
erase
started, you
the
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
though
the timer is set, the recorder will not
record when:
?
There is
no
disc loaded.
?Anon-recordable disc is loaded.
?
Disc Protect is set to ON in the
?
?
page 28).
Power is turned
Setup
menu
(see
There
are
on.
99 titles recorded
already
You cannot enter
a
on
the disc.
timer program when:
?Arecording is already underway.
The time you're trying to set has already passed.
There are already 7 timer programs set.
?
?
If two
?
?
or more
timer programs
The earlier program takes
When the earlier program
overlap:
priority.
finishes, the later program
starts.
?
If two programs
are
set to start at
exactly
the
same
time, the program entered first takes priority.
If the disc is
damaged,
the
successfully.
In this
shows "Rec.
OK", it may
42
recording may
though the
case even
not be.
not
complete
Check field
from
Recording
can
record from
camcorder
external
1
or
External
from External
Recording
You
an
an
external
VCR, connected
Input
Components
component, such
as a
to any of the recorder's
from
Recording
You
can
record from
the DV IN
jack
on
a
digital camcorder connected to
panel of this recorder. Using
the front
the recorder's remote, you
corder and this recorder.
inputs.
Make sure that the
component you
record from is connected
properly
want to
Before
to the DVD
DV IN
Digital Camcorder
a
can
control both the
recording, make sure that the
jack is set up (see page 27).
audio
cam-
input
for the
Recorder. See page 18.
2
Press AV
repeatedly
to select the external
input
ips
to record from.
?T uner: Built-in tuner
?AV1: EURO AV1 AUDIO VIDEO mounted
on
?AV2: EURO AV2 DECODER mounted
back
on
?AV3: AUDIO AV IN 3 / VIDEO IN 3 mounted
back
on
panel
panel
back
panel
(VIDEO, AUDIO (L/R),
mounted on front panel
?D V: DV IN mounted on front panel
a
The
S-VIDEO
IN)
?
Some camcorders cannot be controlled
the
recording
REC MODE
?
If you connect
Press REC
mode
as
necessary
?You can't control this unit
1
by
repeatedly.
Quality
(z)
2
(The
REC indicator
continues until you press STOP
Recording
6
a
on
Press STOP
fixed
lights
in the
to
(x)
the
or
length
of
time,
see
Instant Timer
stop recording.
3
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
details.
DV
from
one.
component
a
DV
a
digital camcorder is connected
panel DV IN jack. See page 18.
input
choose between Audio 1
is
as
you
(original audio)
require.
and
(overdubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 27 for
4
of
information.
Press AV
repeatedly
DV appears in the
Find the
to select the DV
display
window and
on
input.
the TV
place on the camcorder tape
recording to start from.
screen.
that you
want to the
For best results, pause
you want to record.
ote
more
DV
the
?
9 for
can
more
page 40.
(x)
remotely
jack.
Check that the DV audio
You
?
disc is full.
To record for
a
Make sure your
to the front
display window.)
Recording
using
Audio 2
once.
will start.
second DVD Recorder
a
cassette.
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
5 Recording
this
you cannot control the second DVD from this
connected to the DV IN
(HQ, SQ, LQ, EQ)
EQ: Extended
using
recorder's remote.
?You can't record date and time information from
recordable disc.
3
Select
4 pressing
must be DVC-SD format.
signal
source
cable,
?AV4: INPUT 4
Load
?
playback
at the
point
from which
on your camcorder, you can use this
recorder's remote to control the camcorder using the
Depending
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the recorder
signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
detects
is
no
control the camcorder from this remote control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
displayed on screen for a while after
recording stops.
For timer recording to work properly on this
recorder, the digital camcorder must also be
switched on and in operating.
43
RECODING
from
Recording
External
an
Input (Continued)
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to this recorder using a single
DV cable for input and output of audio, video, data and
control signals.
You may see the following messages appear
TV screen when using the DV IN jack.
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
as
IEEE 1394-1995.
logo
only compatible with DV-format
(DVC-SD) camcorders. Digital satellite tuners and
Digital VHS video recorders are not compatible.
a
more
than
one
jack (including
equiptwo
It
recorders).
may not always
cam-
just
one
camcorder.
Digital
Check the tape
There is
no
cassette loaded into the connected
equip-
be
possible to control the connectjack.
can usually record audio as stereo
ed camcorder via the DV IN
camcorders
Uncontrollable device
This recorder cannot control the camcorder.
twin stereo tracks of 12-bit/32kHz.
16-bit/48kHz,
or
This recorder
can
only
record
Set DV Rec Audio to Audio 1
(see page 27).
Audio input to the DV IN
jack
one
or
stereo audio track.
Audio 2
as
should be 32
or
Picture disturbance
on
the
recording
Updating
Information
Camcorder is
required
48kHz
updating
may
occur
information for DV.
Camera mode
Camcorder is set to
(not 44.1kHz).
camera
mode.
if the
component pauses playback or plays an
unrecorded section of tape, or if the power fails in the
source component, or the DV cable becomes disconsource
nected.
Troubleshooting
If you can't get a picture and/or audio
check the bullet points:
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
2
through
the DV IN
jack,
?
?
or
ment.
DVD
?
properly,
time to this recorder.
ment connected via the DV IN
?
the
Not connected to camcorder
The camcorder is not connected
Too many devices connected
The DV jack on this recorder supports connection to
DV camcorder at
?You cannot control this recorder from external
?
your
This recorder is
?You cannot connect
?
on
corder is switched off.
trademarks.
are
Messages
Make
?T ry
sure
the DV cable is
switching
switch back
?T ry
properly connected.
equipment then
off the connected
on.
switching
the audio
input.
ote
Depending
on
the connected
be able to control it
with this recorder.
44
using
camcorder, you may not
the remote control supplied
Title List and
List Menu
Chapter
VR
Using
the Title
The Title
is where you build and edit your
and where you can delete titles and make other
List-Original
menu
ip
List-Original
Playlist,
changes to the Original content of the disc. You can
also play individual titles directly from the Title ListOriginal menu.
The recorder must be stopped in order to edit using
Title List-Original.
1
Press MENU/LIST
List-Original
?
display
the
the Title
next page if there
?To exit the Title
display
detailed title information
more
for selected title.
Using
menu.
the
Chapter List-Original
Press MENU/LIST
1
Title
2
view
List-Original
repeatedly
to
VR
menu
EDITNG
display
menu.
Use vVbBto choose the title you want to
Chapter List-Original menu then press
ENTER.
Use the v / V buttons to
RETURN
to
repeatedly
Press DISPLAY to
display
are more
the
previous/
Title
than 6 titles.
List-Original
the
List-Original options
appears
the left side of
on
menu.
menu, press
Use v / V to select
(O).
3 Original options
1/12
Title List
Original
'Chapter'
from Title List-
then press ENTER.
Chapter List-Original
menu
appears
the TV
on
screen.
DVD-RW
TITLE 1
HQ
1H 5M
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
Free
Chapter List
TITLE 1
7/12 Su
Original
30M56S
PR-01
1/9
TITLE 4
13/12
Select
2
To view Title
DISPLAY
16/12
Info
TITLE 6
0:10:00
LIST
19/12
0:15:00
Close
Playlist
List-Original options,
select the
title you want then press ENTER.
Title List-Original options appears on the left side of
the
3
TITLE 5
0:08:00
menu.
Select
To view
an
option
then press ENTER
Chapter List-Original options
side of the
Play:
Starts
playback
the
5
selected title.
Chapter: Moves Chapter ListOriginal menu of the title.
(refer to right on this page)
Delete
Protect
Delete: Deletes the title.
(page
Edit
52)
Playlist
Protect: Protects accidental
recording, editing or deleting
the title. (page 55)
Edit: Selects Edit
name.
Delete Part
?
Undo
?
Redo
Delete Parts: Deletes
a
option
Title
playback
chapter.
of the
Title: Moves to Title List-
Original
(refer to
Delete
of the
menu
left
on
this
Delete: Deletes the
Playlist
chapter.
page)
chapter.
(page 52)
Combine: Combines two
one.
chap-
(page 54)
Playlist: Adds the chapter
Playlist. (page 51)
part
(page 52)
the left
then press ENTER
Starts
selected
ters into
Undo: Undoes the last delet-
Press RETURN
6 List-Original
(O) repeatedly
to exit
to the
Chapter
menu.
Redo: Redoes the undo
action.
(page 53)
Playlist: Adds the
Playlist. (page 51)
Press RETURN
an
Play:
Play
options.
ing. (page 53)
?
4 Original
Use v / V to select
(page 53)
of the Title.
on
to confirm.
?T itle Name: Edits the title
Title Name
appears
menu.
Combine
of
select the
ENTER.
want
Use v / V to select
Chapter
Close
Playlist
Chapter List-Original options,
4 chapter you
then press
to confirm.
Play
LIST
(O) repeatedly
title to the
to exit Title List-
menu.
45
Title List and
Using
1
the Title
?
repeatedly
display
the Title
menu.
Use the v / V buttons to
To exit the Title
the
Using
Press MENU/LIST
display
List-Playlist,
the
previous/
than 6 titles.
are more
want to
view
press RETURN
menu
ENTER.
(O).
1/12
Title List
Playlist
the
List-Playlist options
Use v / V to select
TITLE 1
7/12
TITLE 2
0:16:00
9/12
TITLE 3
0:35:00
10/12
0:30:00
Free
the left side of
on
appears
menu.
3 Playlist options
DVD-RW
1H 5M
the Title
to
repeatedly
display
1 List-Playlist
Use vVbBto choose the title you
2
then press
Chapter List-Playlist
Title
HQ
VR
Menu
Chapter List-Playlist
menu.
next page if there
?
to
(Continued)
VR
Menu
List-Playlist
Press MENU/LIST
List-Playlist
List Menu
Chapter
from Title List-
'Chapter'
then press ENTER.
Chapter List-Playlist
menu
appears
on
the TV
screen.
TITLE 4
13/12
TITLE 5
0:08:00
Select
DISPLAY
16/12
Info
LIST
TITLE 6
0:10:00
19/12
0:15:00
Chapter List
Close
Original
TITLE 1
7/12 Su
Playlist
30M56S
1/9
2
3
To view Title
List-Playlist options,
you want then press ENTER.
Title List-Playlist options appears
the menu.
Use v / V to select
an
option
on
select the title
the left side of
then press ENTER
Select
LIST
Close
Original
to confirm.
To view
Play:
Play
Starts
playback
the
selected title.
Chapter
Title Name
5
List-Playlist
menu.
(page
52)
name.
(page 53)
Delete Part: Deletes
the Title.
Press RETURN
a
part of
(page 52)
(O) repeatedly
Use v / V to select
option
display
playback
chapter.
of the
Title: Moves to Title
Delete
menu
left
Combine
on
List-Playlist
chapter. (refer to
page)
of the
this
Delete: Deletes the
chapter from
Chapter List-Playlist menu.
(page 52)
Move
the
to exit Title List-
Combine: Combines two
ters into
more
the left
then press ENTER
Starts
selected
one.
chap-
(page 54)
Move: Moves a chapter of
Chapter List-Playlist menu to a
position on the menu. (page 54)
ip
detailed title information
for selected title.
Press RETURN
6 List-Playlist
46
an
Play:
Play
menu.
Press DISPLAY to
on
to confirm.
Title
Title Name: Edits the title
appears
menu.
Delete: Deletes the title from the
Title
Delete Part
4 Playlist
side of the
select the
ENTER.
want
Chapter List-Playlist options
Chapter: Moves Chapter ListPlaylist menu of the title. (refer
to right on this page)
Delete
Chapter List-Playlist options,
4 chapter you
then press
(O) repeatedly
menu.
to exit
Chapter
Title List and
Chapter
the Title List
Using
From the Title List
display
play,
can
(Continued)
Video
menu
you
List Menu
Deleting
name
and
delete titles.
Once
a
Video mode disc is
changes its
titles to play.
screen
select
1
Before
on
can
do is
?
When
Date
12/11
0:20:15
TITLE 2
14/11
0:43:30
TITLE 3
18/11
0:33:00
TITLE 4
20/11
0:10:00
TITLE 5
23/11
0:15:00
TITLE 6
25/11
0:17:00
DISPLAY
time will not increase.
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
Info
1
2
Close
Press MENU/LIST to
2
Title List
List
3
options
display.
title then press ENTER.
appears on the left side of the Title
a
an
option
3
display
Use v / V to select 'Delete' then press ENTER to
confirm.
pressing ENTER,
displayed.
then press ENTER
Title List
the new,
updated
title list is
to confirm.
Play:
Play
Title Name
Delete
Starts
playback
selected title.
Title Name
Title Name: Edits the title
Delete
name.
(page 53)
Delete: Deletes the title from the
Press RETURN
Play
the
Title List.
4
the disc.
menu.
After
Use v / V to select
on
Use vVbBto choose a title you want to
delete then press ENTER.
Title List options appears on the left side of the Title
List
Use v / V to choose
DVD-R disc, the title will
List, but the available record-
Duration
TITLE 1
Select
delete titles recorded
a
increase if it is the last title
1/12
Free
can
Caution
If you delete a title from
disappear from the Title
the Title List.
display
Title
1H 5M
finalized, you
?
Title List
HQ
disc is
a
Video
the disc.
ing
DVD-RW
Title
finalized, the Title List
appearance and all you
Press MENU/LIST to
a
(O) repeatedly
to exit Title List.
Repeat steps
4 the
Title List.
2-3 to delete additional titles from
Press RETURN
(O) repeatedly
5 Title List display.
to remove the
ip
Press DISPLAY to
display
more
detailed title information
If the disc has
for selected title.
You should
already
see a screen
like the
been finalized
one
below.
Indicates total and current page number
Disc
name
Title list
DVD-RW
?
1/2
1
TITLE 1
12/11
0:30:21
2
TITLE 2
14/11
0:20:08
3
TITLE 3
18/11
1:10:03
4
TITLE 4
20/11 0:43:21
5
TITLE 5
23/11 0:15:21
6
TITLE 6
25/11 1:13:21
PAGE
UP
PAGE
DOWN
EXIT
Also you can exit the Title List
MENU/LIST.
Moves to the next
previous
or
page
Exits the Title List
display using
screen.
TITLE
or
47
EDITNG
Title List and
Using
List Menu
Chapter
the Title List
+RW
menu
ip
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play titles directly from the Title List menu.
The recorder must be stopped in order to edit using
Title List
1
?
the
menu.
Press MENU/LIST to
display
Use the v / V buttons to
the Title List
display
the
menu.
(O).
display
Caution
If you press REC (z) when the Title List menu
appears, the selected title is erased then overwrte
recording
1
2
DVD+RW
TITLE 1
TITLE 2
0:16:00
7/12
starts.
the
(See
page 57 for
List
Chapter
Press MENU/LIST to
more
+RW
menu
display
details.)
Title List
menu.
10/12
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
view
Title List
TITLE 3
0:35:00
9/12
0:30:00
Free
options
appears
on
the left side of the
menu.
Use v / V to select
TITLE 4
13/12
Select
2
detailed title information
more
for selected title.
1/12
Title List
1H 5M
Press DISPLAY to
Using
previous/
next page if there are more than 6 titles.
?To exit the Title List menu, press RETURN
HQ
(Continued)
To view Title List
TITLE 5
0:08:00
DISPLAY
Info
3 options
TITLE 6
0:10:00
16/12
19/12
REC
options,
0:15:00
Chapter
Close
Capter List
select the title you
'Chapter'
from Title List
then press ENTER.
List menu appears on the TV
TITLE 1
7/12 Su
screen.
30M56S
want then press ENTER.
Title List options appears on the left side of the
1/9
menu.
3
Use v / V to select
an
option
then press ENTER
to confirm.
Play:
Play
Full
Starts
playback
selected title
Play
Chapter
Full
Play:
Starts
playback
including the
chapters.
selected title
den
Protect
Chapter:
menu
of the title.
this
on
Moves
the
Chapter List
(refer to right
Divide
Hide
Chapter
5
Use v / V to select
recording, editing or deleting
(page 55)
Play:
Hide
name.
options.
one
4
Press RETURN
menu.
48
(page 56)
Hide (Show): Hides (or
Shows) the all chapters
the title. (page 55)
(O) repeatedly
chapter. (refer
page)
menu
to left
Hide
one.
on
chap-
(page 54)
(Show): Hides (or Shows)
chapter. (page 55)
title into
6
two titles.
?
of the
the selected
(page 53)
Divide: Divides
playback
chapter.
of the
ters into
?T itle Name: Edits the title
?
Starts
Combine: Combines two
the title.
Edit: Selects Edit
chapter
then press ENTER
Title: Moves to Title List
this
of
option
an
selected
Combine
Protect: Protects accidental
select the
options,
to confirm.
Title
(page 52)
List
menu.
Play
page)
Close
want then press ENTER.
Chapter List options appears on the left side of the
hid-
Delete: Deletes the title.
Title Name
To view
4 you
chapters.
Delete
Edit
except
Select
the
the hidden
within
to exit Title List
Press RETURN
List
menu.
(O) repeatedly
to exit
Chapter
Title List and
Using
List Menu
Chapter
the Title List
(Continued)
+R
menu
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play titles directly from the Title List menu.
The recorder must be stopped in order to edit using
Title List
the
Using
the
1
2
Press MENU/LIST to
+R
menu
display
Title List
menu.
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
view
Title List
menu.
List
Chapter
options
appears
on
EDITNG
the left side of the
menu.
1
Press MENU/LIST to
?
Use the v / V buttons to
next page if there
the Title List
display
the
display
menu.
Use v / V to select
3 options
previous/
Chapter
'Chapter'
from Title List
then press ENTER.
List menu appears on the TV
screen.
than 6 titles.
are more
?To exit the Title List menu, press RETURN
(O).
Capter List
TITLE 1
7/12 Su
30M56S
1/6
Title List
1/9
DVD+R
TITLE 1
HQ
1H 5M
7/12
TITLE 2
0:16:00
TITLE 3
9/12
0:35:00
10/12
0:10:00
-
0:30:00
Free
TITLE 4
13/12
Select
2
To view Title List
DISPLAY
Empty
16/12
-/-
-
Info
Select
Title
To view
Close
options,
4 you
select the title you
menu.
Use v / V to select
an
option
then press ENTER
Chapter
Play:
Starts
playback
Full
selected title
Play
the
except the hidden
chapters.
Full
Chapter
Play:
Starts
playback
including the
chapters.
selected title
Delete
den
Protect
Moves
Chapter:
menu
Edit
on
of the title.
this
the
hid-
chapter
menu.
5
Use v / V to select
option
an
then press ENTER
to confirm.
Play:
Starts
playback
chapter.
of the
Play
selected
Title
Title: Moves to Title List
Combine
of the
this
Hide
chapter. (refer
page)
menu
to left
Combine: Combines two
Hide
Chapter List
(refer to right
one.
on
chap-
(page 54)
(Show): Hides (or Shows)
chapter. (page 55)
the selected
page)
6
(page 52)
Divide
select the
options,
ters into
Delete: Deletes the title.
Title Name
List
want then press ENTER.
Chapter List options appears on the left side of the
to confirm.
Play
Close
1:38:00
want then press ENTER.
Title List options appears on the left side of the Title
List
3
TITLE 5
0:08:00
Press RETURN
List
(O) repeatedly
to exit
Chapter
menu.
Protect: Protects accidental
recording, editing or deleting
(page 55)
Hide
of
the title.
Edit: Selects Edit
options.
?T itle Name: Edits the title
(page 53)
(Show): Hides (or
Shows) the all chapters
the title. (page 55)
name.
?
4
Press RETURN
Hide
(O) repeatedly
within
to exit Title List
menu.
ip
Press DISPLAY to
display
more
detailed title information
for selected title.
49
Title and
Chapter Editing
Edits you make to the Original content changes the
actual content of the disc. For example, if you delete
title
a
chapter from the Original content (Title or
Chapter), that title or chapter is deleted from the disc,
freeing up extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the recorder not to play that title; nothing is actually deleted from the disc.
Adding Chapter
or
Titles, Chapters and Parts
Titles in the disc's
original
VR
content contain
sections of
Original or
Playlist menu you
can add or delete
a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Playlist
are
titles. From the
Original
parts. Adding
Chapter
You
chapter marker anywhere in a Playlist or
during recording or playback.
chapter is marked, you can use the Chapter
can
put
Original
title
Once the
Search
a
feature,
the
move
1
the title
Play
At the
(Original
or
Playlist).
you want to start
CHP ADD.
2 press point
chapter
can
a new
chapter,
marker icon appears on the TV screen.
also put chapter markers in during recording.
Delete, Add and Move func-
tions, the
start and end frames may not be
set in the start and end point display.
?
delete, combine and
and
Caution
editing using
as
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 27).
?You
When
well
ote
A
?
as
chapters in the Chapter List-Original or Chapter ListPlaylist menu.
You can insert up to 999 chapter markers in both the
Original and Playlist contents.
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts
VR
Markers
During Playlist playback,
exactly
as
you may notice a momennot a malfunction.
tary pause between edits. This is
Changing
VR
Title Thumbnails
+RW
Thumbnail
+R
Each title displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
ip
You
change the thumbnail picture of the title on
Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
the
50
can
also
Title and
Making
Chapter Editing (Continued)
New
a
VR
Playlist
Use this function to add
an Original title or chapter to
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting an Original or Playlist title/chapter on page
52).
the
Adding Additional Title/Chapters
Playlist VR
You
add
can
an
---
The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you
add more chapter markers to the Original later, these
are
You
not
automatically copied
over
into the
Playlist
.
title/chapter
1
Playlist
on
only
2
Choose
title
or
chapter
on
the
Chapter) options
Original menu.
or
left side of the
Original
menu
appears
on
the
Chapter
Play
Delete
Title
Protect
Delete
Edit
Combine
Playlist
Playlist
'Playlist'
Select 'New
chapters
Play
Delete
Title
Protect
Delete
Edit
Combine
Playlist
Playlist
List-Original
Chapter List-Original
Use v / V to select
3 options
'Playlist'
from
from
Original
menu
then press ENTER.
Select
Playlist.
Playlist
TITLE 1
TITLE 2
Original
Choose
4 tered
Playlist.
New
new
Chapter
then press ENTER.
Select
The
screen.
Chapter List-Original
Use v / V to select
4
display
an Original title or chapter to put into
Playlist, then press ENTER.
Original menu options appears on the left side of
New
List-Original
3 options
to
Choose
Title
Play
Title
repeatedly
menu.
Play
put into the Playlist, then press ENTER.
Original (Title
List-Original
the
the
page 45.
a
a
to
repeatedly
display
List-Original menu.
If you want to display the Chapter List-Original
menu, refer to "Using the Chapter List-Original
to
Press MENU/LIST
Title
to
45.
Title
on
Original title or chapter to add
if it is already registered.
even
If you want to show the Chapter List-Original menu,
refer to "Using the Chapter List-Original" on page
this page.
Press MENU/LIST
menu"
2
to the
1
title
title.
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
can
Playlist
to the
Playlist'
Title
List-Playlist that is already registitle or chapter, then press
a
ENTER.
The title
Playlist
or
chapter
appears in the
updated Playlist
menu.
then press ENTER.
title appears in the updated
of the title are added to the
a
to insert
Playlist.
Playlist.
Repeat steps 1-4 to
on the Playlist.
5
ter
6
back to the Title
Press RETURN
add additional title
or
(O) to exit, or MENU/LIST
List-Original menu.
chapto go
All
51
EDITNG
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
Deleting
+R
When you erase a title or chapter from the Playlist
menu on DVD-RW discs formatted in VR mode, you
only
remove
in the
it from the
Original
Playlist;
the
title/chapter
remains
menu.
If you choose to delete a title or chapter from Title List
Chapter List menu, the title or chapter is actually
You
can
1
Title
deleted from the disc and the
remaining time available
recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
delete
part which you do
a
Press MENU/LIST
List-Original
not want in the title.
repeatedly to display
Title List-Playlist menu.
or
2
Use vVbBto choose a title you want to
delete then press ENTER.
The options appears on the left side of the menu.
3
Select 'Delete Part' from the
or
for
VR
Part
a
options
on
the
menu.
e.g., If you select "Delete Part"
on
Title
List-Original
menu.
ote
It may not be possible to delete
than 5 seconds long.
1
On the Title List
bBto choose
chapters
Chapter
chapter or
or
a
that
Select 'Delete'
option
on
Play
less
Title Name
Chapter
the
options
Delete Part
Delete
List menu, use vV
title you want to
delete then press ENTER.
Options appears on the left side of the
2
are
Undo
Protect
Redo
Edit
screen.
on
Playlist
the
menu.
e.g., If you select "Delete"
on
Title
4
List-Original
menu.
Press ENTER.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start' icon is
Play
Chapter
Title Edit
-Delete Part
highlighted.
TITLE 1
20/8 00:35:42
Delete
Protect
Edit
Start
End
Playlist
3
4
Done
The confirm message for
pressing ENTER,
displayed.
5
6
Starts
deleting
will appear.
6
Use b / B to select 'Yes' then press ENTER.
The selected chapter or title is deleted.
After
1
-
the new,
updated
menu
is
4 to continue to delete from the
(O) repeatedly
Move Point
playback
7
8
to exit the
menu.
and
pause step, search and
use
to find the
Press ENTER at the
starting point.
starting point
of the section
you want to delete.
'End' icon is highlighted.
The
menu.
Press RETURN
Select
5 slow-motion
Press ENTER to confirm.
Repeat steps
0:00:00.00
Cancel
part is indicated
on
the
Use pause step, search,
to find the
Progress
skip
Bar.
and slow-motion
ending point.
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
point,
of the section
v / V to
use
select 'Cancel' icon then press ENTER.
ote
?
When DVD+RW
changed
?
recording,
are
name
is
to 'Deleted Title'.
If the deleted titles
titles
the deleted title's
more
combined into
than two
one.
are
continued, the
If you finish to
ENTER.
9 press
The confirm message for
10Use
deleting
will appear.
b / B to select 'Yes' then press ENTER.
The selected
List-Original
52
edit, select 'Done' icon then
part is deleted from the title and Title
or
Title
List-Playlist
menu
appears.
Title and
Chapter Editing (Continued)
Undoing/Redoing
the Last
VR
Deleting
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
undo the last
1
one
deleting
you
You
List-Original
on
Title
1
menu
then press ENTER.
It doesn't matter whether you are currently in the
Title List-Original; the last deleting is undone.
a
can name
32 characters
made).
Select 'Undo' from the Title
e.g., If you select "Undo"
Naming
2
List-Original
titles
+RW
Video
independently.
Names
+R
can
be up to
long.
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options appears on the left side of the menu.
Use v/V to select 'Title Name'
option
then press
ENTER.
Keyboard
menu.
VR
Title
menu
appears.
e.g., If you select "Title Name"
on
Title
List-Original
menu.
Play
Chapter
Title Name
Play
Delete Part
Chapter
Undo
Delete
Redo
Protect
Delete
Protect
Edit
Title Name
Delete Part
Undo
Redo
Edit
Playlist
Playlist
otes
You can't undo
recording.
You can't undo anything after ejecting the disc from
the recorder or switching the recorder into standby.
You can still undo deleting after exiting the menu
a
3
Enter
for the title. Use vVbBto select
a name
character then press ENTER to confirm your
selection. Refer step 3 as shown on page 21
a
(Station Rename).
screen.
TITLE 1
6
Alphabet Capital
ip
Yo u
can
redo the last undo action
option. Select
menu options
'Redo' from the
using 'Redo'
Title List-Original
(1.6)
123456789
0
ABCDE
J
FGH
I
KLMNOPQRST
then press ENTER.
UVWXYZ
OK
Cancel
Space
Delete
Choose OK then press ENTER to fix the
return to the previous menu screen.
4 and
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
otes
?
?
?
Names
can be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
When
recording
entered
after
name
is
in
DVD-R, DVD+R
displayed
on
or
DVD+RW, the
the DVD
player only
finalizing.
53
EDITNG
Title and
Combining
VR
Chapter Editing (Continued)
Two
+RW
Chapters
Use this function to combine two
Original chapters
Into One
Moving
+R
into
adjacent Playlist
or
one.
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
1
Press MENU/LIST
repeatedly
to
only
one
chapter
display
List-Playlist
display the Chapter List-Playlist
"Using the Chapter List-Playlist" on
Title
menu.
To
ote
This function is not available if there is
VR
Playlist Chapter
a
menu, refer to
page 46.
within the title.
1
ote
On the
Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER.
Chapter List options appears
on
This function is not available if there is
Chapter List
the left side of the
TITLE 1
7/12 Su
Playlist
only
1/9
Use v / V to select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
e.g., If you select "Combine"
Original
on
Chapter
List-
Select
LIST
Close
Original
menu.
2
Play
Title
Select
a
chapter
from the
Chapter List-Playlist
menu.
Press ENTER.
3 Chapter List-Playlist options
Delete
side of the
Combine
appears
Use v / V to select 'Move' from
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
on
the left
menu.
4 options then press
Playlist
3
chapter.
30M56S
menu.
2
one
Playlist
ENTER.
Play
is dis-
Title
Delete
Combine
Move
5
Use vVbBto choose the
After
54
place you want to
chapter to then press ENTER.
pressing ENTER, updated menu is displayed.
move
the
Title and
Protect
a
Chapter Editing (Continued)
Use this function to
or
deleting
1
2
3
VR
Title
+RW
+R
Hide
protect accidental recording, editing
of the title.
Press MENU/LIST to
Use vVbBto choose
a
Title List
option
on
Chapter
1
the
screen.
options.
On the Title List
use
a
title/chapter
on
Title List
2
Chapter
or
vVbBto choose
Select 'Hide'
menu.
Full
a
List menu,
title
or
chapter
option
on
the
on
you
EDITNG
screen.
options.
Title List
menu.
Play
Chapter
Play
Delete
Chapter
Delete
Protect
Edit
3
Press ENTER to confirm.
The lock mark will appears
the Title List
Play
Play
Full
on
menu.
e.g., If you select "Hide"
e.g., If you select "Protect"
4
List
+R
want to hide then press ENTER.
Options appears on the left side of the
title you want to pro-
tect then press ENTER.
Options appears on the left side of the
Select 'Protect'
menu.
+RW
Title/Chapter
Use this function to hide
or
display
a
on
Title Name
Protect
Divide
Edit
Hide
Press ENTER to confirm.
The title's thumbnail will be dim.
the title's thumbnail.
ip
ip
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
this, you
can
If you select a title that has already been dim on the
Title List menu, you can 'show' it by choosing "Show"
from the Title List
can see
menu
options.
After
doing this,
you
the title.
edit and delete the title.
55
Title and
Chapter Editing (Continued)
Divide One Title Into Two
Use this command to
split
a
+RW
title up into two
new
titles.
On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
1
screen.
2
Select 'Divide' from the Title List
menu
options.
Play
Full
Play
Chapter
Delete
3
Title Name
Protect
Divide
Edit
Hide
Press ENTER when 'Divide'
option
is
highlight-
ed.
Title Edit-Divide
menu
appears and goes into STOP
mode.
Current
Title Edit
-
picture
TITLE 1
Divide
20/8 00:35:42
The first title's
thumbnail
#1
Thumbnail
The second title's
thumbnail
Divide
0:00:00.00
Cancel
Select
Done
4
5
Move Point
Use pause step, search,
to find the
point
When 'Divide'
ENTER at the
You
can
option
point.
clear the
skip
and slow-motion
you want to divide the title.
is
highlighted, press
dividing point
and exit the Title
Edit-Divide menu, use v / V to select 'Cancel'
option then press ENTER. The dividing point is
clear.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
4 minutes to divide.
56
new
titles. It take up to
Addition Information
You
VR
Video
Clean-up Recording
simply clean-up (erase) all contents on the disc
recording from the first section of the disc.
disc format is not changed.
1
2
Switch
the recorder and load
on
a
recordable
+RW
You
button for
(z)
on
the TV
1
screen.
2
Delete all title and record?
No
Yes
displayed on
capable of playing
menu
that is
player
the
DVD+RW
EDITNG
than 3
more
seconds.
The message will appears
view the Title List
can
DVD+R discs.
or
Press and hold REC
+R
another DVD
disc.
displayed
or players
menu
other DVD recorders
on
can
then start
The
Title List
Viewing
+RW
Insert DVD+R
or
DVD+RW disc recorded
already.
Press TITLE
press and hold MENU/LIST butstop mode.
or
ton for three seconds in
Title List
Use b / B to select "Yes" then press ENTER.
will start. (The REC indicator lights in
You
the
STOP
will appear
menu
as
below.
ip
3 Recording
display window.)
can remove
the Title List
menu
by pressing
(x).
DVD+RW
Title List
Overwrite
To overwrite
+RW
Recording
a new
video
to
recording
a
TITLE 1
previously
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
recorded
title, follow these steps. This feature is not
available on DVD+R, which always record at the end of
TITLE 4
the Disc.
1
2
Select
input
you want to record
source
TITLE 6
0:10:00
16/12
0:15:00
19/12
1/2
(chan-
nel, AV1-4, DV).
Press MENU/LIST to
the Title List
display
menu.
To
TITLE 1
1H 5M
7/12
TITLE 2
0:16:00
TITLE 3
0:35:00
9/12
10/12
0:30:00
Free
Most
TITLE 4
13/12
Select
TITLE 5
0:08:00
DISPLAY
16/12
Info
TITLE 6
0:10:00
write.
4
Overwrite
19/12
REC
Use vVbBto choose
3
0:15:00
Close
a
title you want to
over-
(z) to start overwrite recording.
recording is started from the start point
Press STOP
(x)
to
title, select the title you
or
N
want
(PLAY).
updated
menu
is dis-
played.
players
can
play
A small number of
players
al that
mode, finalized
with the other
came
also
or
player
play
or
DVD+RW.
DVD-RW discs
not. Check the
manu-
to check what kinds
play.
'fixes' the
that the disc
can
DVD
finalized discs
mode, finalized DVD+R
Finalizing
of
stop the overwrite recording.
title is created and
DVD
regular
of discs it will
the title.
new
a
recorded in Video
recorded in VR
Press REC
The
back
play
then press ENTER
Playing Your Recordings on Other
Players (Finalizing a Disc)
DVD+RW
HQ
3
1/12
Title List
5
TITLE 5
0:08:00
13/12
can
be
recordings and editings in place
played on a regular DVD player
computer equipped with
a
Finalizing a Video mode
navigating the disc. This
disc creates
a menu screen
is accessed
by pressing
MENU/LIST
To finalize
or
a
so
or
suitable DVD-ROM drive.
for
TITLE.
disc, refer
to "Finalize"
on
page 28.
otes
This function is not available with
a protected title.
overwriting is elapsed more than the recording
length of the current title, the next title is overwrited.
But if next title is protected, the overwriting is stopped
at the starting point of the title.
If the selected title's recording length is less than 10
If the
seconds, the
protected,
next title is overwrited. But if next title is
the
overwriting
is
stopped.
otes
Unfinalized DVD+RW is
playable
on
regular
DVD
players.
The edited contents of DVD+RW disc is
compatible
regular DVD players only after finalizing.
Any edited contents of the DVD+R disc are not be
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
on
57
Language Code
Enter the
(See
appropriate
23).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
58
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
26).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
AN
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
59
REF NC
Controlling
You
can
Your TV with the
control the sound
level, input
power switch of your LG TV with the
source, and
supplied
remote.
Controlling
You
You
can
control your TV
using
Remote
Supplied
can
other TVs with the remote
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
the buttons below.
code.
1.
While
holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
Buttons
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
By pressing
You
POWER
Turn the TV
AV
can
Switch the TV's
off.
input
source
input
sources.
Adjust
MUTE
Temporarily
press again
60
1
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
to restore.
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter a new code number, the code number
entered will be erased.
When you
replace
the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
the volume of the TV.
turns TV sound
Depending
previously
Scans up or down through
memorized channels.
VOL +/--
Code Number
LG / GoldStar
otes
on or
between the TV and other
PR +/--
Manufacturer
OFF,
again.
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Solution
Cause
Symptom
No power.
The power cord is disconnected.
No
TV/DVD mode for the recorder is set to
Press TV/DVD
TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
picture.
Plug the power
securely.
cord into the wall outlet
on
the remote control
window.
The TV is not set to receive DVD
Select the
Recorder
on
signal output.
the TV
appropriate video input mode
the picture from the DVD
so
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
audio cable is not set to receive DVD
Recorder
signal output.
The audio cables
are
not connected
the TV.
on
input mode on the
you can listen to the
sound from the DVD Recorder.
audio receiver
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
connected with
equipment
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
a
disc.
cator in the
playback.
An
unplayable
disc is inserted.
Insert
a
(Check that the disc
display window is lit.)
disc.
playable
indi-
the disc
(Check
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
side
playback
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
picture from the
input is distort-
external
The video
Cancel the
from the external
signal
com-
ponent is copy-protected.
Some channels
are
Those channels
are
not stored in the
recorder.
when
Aerial
Camcorder
Camcorder is off.
image
is not
image
via
or
cables
are
loose.
Camcorder
input
or
function
or
change
Connect the
component directly
to your
Restore channels. See
"Program
Edit"
pages 20-21.
Tighten
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
shown.
A/V
Rating
level.
You cannot connect via this recorder.
on
picture or sound of
broadcasting channel is
weak or missing.
The
rating
TV.
ed
skipped over
usingv/V.
tray correctly
Clean the disc.
the
The
the disc
on
guide.
DV IN to
DVD Recorder INPUT SELECT is
Use AV to select
incorrect.
AV2, DV, etc.)
input
channel
(AV1,
DVD Recorder is not
shown
on
TV
screen.
61
REF NC
Troubleshooting (Continued)
Can't
The disc
play a disc
using this
recorded
recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
(page 28)
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
be RW
player must
play it.
compati-
ble in order to
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
successfully.
blank space
remaining
The
source
copy
are
you
to record is
trying
setting
the
channel is tuned
When
recording
is not
the
recording channel,
on
to
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
recording
possible.
You cannot record the
source.
Select the channel
the recorder's
protected.
When
Timer
the disc
on
is insufficient.
tuner.
Use
disc,
protected
Clock in DVD Recorder is not set to
cor-
rect time.
on
built-in TV tuner.
a
VR mode formatted disc for copy-
material.
once
Set clock to correct time. See "Auto
Clock Set"
or
"Manual Clock Set"
on
page 22.
Timer has been
programmed
Reprogram
Recording"
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
present.
light does
programming timer.
not
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 41.
on
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 40.
The remote control
The remote control is not
does not work
remote
properly.
sensor
pointed
at the
of the DVD Recorder.
Point the remote control at the remote
sensor
The remote control is too far from the
of the DVD Recorder.
Operate
the remote control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
remote control and the DVD Recorder.
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
When the DVD Recorder is moved from
to
a warm
In locations where moisture condensation may
can occur:
a
cold
place
?
Keep
the DVD Recorder
plugged
outlet with POWER On. This will
place.
into
an
occur:
AC power
conden-
help prevent
sation.
?
Under
62
extremely
humid conditions.
?
When condensation has
occurred, wait
for the DVD Recorder to
dry
before
a
using
few hours
it.
Specifications
General
Power
AC
Power
30W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
430 X 76 X 383
5.5
mm
(w
x
h
x
d)
kg
5˚C to 35˚C
REF NC
5 % to 90 %
PAL I colour
system
Recording
format
PAL
Recording
format
DVD
system
Recording
Recordable discs
VideoRecording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
Recordable time
Approx.
6 hours
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
1 hour (HQ mode),
(EQ mode)
2 hours
(SQ mode),
4 hours
(LQ mode),
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
Hz to 20 kHz
Inputs
AERIAL IN
Aerial
input, 75 ohms
Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBm morethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (i.LINK/IEEE 1394 standard)
VIDEO IN
1.0
AUDIOIN
DV IN
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
output (optical audio)
Audio output (analog audio)
Audio
x
1
/ SCART
Accessory:
Scartcable.............................1
Videocable.....................1
Audiocable(L,R)........................1
RFCoaxialCable................1
Remotecontrol..........................1
Batteries.......................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
symbol
are
trade-
Laboratories.
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
63
human touch
Technology with the
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
the
provide
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
does not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RD0028B
Download PDF

advertising