LG | DVC8700 | LG DVC8700 Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DVC8700
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
FOR THE GUARANTEE TERMS &
CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Precautions /
Safety
Important
notes on
CAUTION
Notes
on
this unit
copyrights:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
controlling
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
to
___________________________________
___________________________________
Features:
?
Complete versatility
Tapes.
?
Watch
a
to
DVD while
play DVD, VCDs, audio CDs
recording
a
or
VHS
TV show to the VCR.
Remote controls both DVD and VCR decks.
?
Records from DVD to VHS
?
with
(unless
DVD is copy
protected
Macrovision).
Hi-Fi Stereo VCR.
?
CAUTION:
This
To
Digital Video Disc Player employs
a
Laser
System.
proper use of this product, please read this owner's
carefully and retain for future reference, should the unit
ensure
manual
contact an authorized service location-
require maintenance,
service procedure.
see
Use of controls,
other than those
adjustments or the performance of procedures
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
POWER: This unit
operates
on a
mains
supply of 200-240V~,
50Hz.
supplied with a BSI 1363 approved 13
plug, fused at 5 amp. When replacing the fuse
always use a 5 amp BS 1362, BSI or ASTA approved type.
Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer or "LG Electronics
U.K.Ltd." If the type of plug supplied is not suitable for the
mains sockets in your home, then the plug should be removed
and a suitable type fitted. Please refer to the wiring instrucWIRING: This unit is
amp mains
tions below:
WARNING: A mains
CAUTION: The
apparatus shall
exposed to water,
objects filled with liquids,
plug removed from the mains lead of this
destroyed. A mains plug with bared wires is haz-
unit must be
splashing and that no
placed on the apparatus.
ardous if inserted in
product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
letter E
dripping
or
such
vases, shall be
as
not be
This
a
mains socket.
Do not connect either wire to the earth
or
with the earth
green and yellow.
If any other plug is fitted,
or
symbol
use a
5 amp
pin, marked
or
or
fuse, either in the plug,
at the distribution board.
IMPORTANT: The wires in this mains lead
accordance with the
-
with the
coloured green
BLUE:
NEUTRAL,
are
coloured in
following codes:
BROWN: LIVE
-
As the colours of the
wires in the mains lead of this unit may not correspond with
the coloured marking indentifying the terminals in your plug,
proceed
as
follows: The wire which is coloured blue must be
connected to the terminal which is marked with the letter N
or
coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L
coloured red.
2
or
Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
9
Connecting to a TV & Decoder (or Satellite)
.10
ConnectingtoOptionalEquipment.
10
Important notes on controlling this unit
.11-16
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.12
Usingyourunitfortheveryfirsttime
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheclockManually.................13
Tosetthecoloursystem..................13
Howtousingthemainmenu...............14
.14
TuninginTVStationsAutomatically.
.15
TuninginTVStationsManually.
.16
ChangingtheorderofTVStations.
DeletingTVstations......................16
.17-20
BeforeOperation-DVDpart.
GeneralExplanation......................17
On-ScreenDisplay.......................17
InitialSettings........................18-20
Initial Settings General Operation.
18
Language..........................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................18
Sound.............................19
Others............................19
ParentalControl......................20
Operation with Audio CD and MP3/WMA Discs.
PlayinganAudioCDandMP3/WMADiscs
NoteonMP3/WMARecordings.
.
.
.
.
.
.
.
.
.
.
.
.
.
OperationwithTape.....................21-23
Playingatape..........................21
.21
CM(CommercialMessage)Skip.
.21
OPR(OptimumPictureResponse).
.22
InstantTimerRecording(ITR).
Timer recording using On Screen Display.
23
.24-26
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............24
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.27
.27
Pause.............................28
MovingtoanotherTrack...............28
RepeatTrack/All/Off...................28
Search.............................28
Random...........................28
RepeatA-B.........................28
3DSurround........................28
.28
ChangingtheAudioChannel.
OperationwithJPEGDisc...................29
ViewingaJPEGdisc.....................29
Movingtoanotherfile.................29
.
.
.
.
.
.
.
.
.
.
StillPicture.........................29
Toflipthepicture.....................29
Torotatepicture......................29
.29
NotesonJPEGRecordings.
ProgrammedPlayback.....................30
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc............................30
.30
ProgrammedPlaybackwithVideoCD.
.30
RepeatProgrammedTracks
.30
ErasingaTrackfromProgramList.
.30
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.31-32
AdditionalOperation-VCRpart.
OnScreenDisplay.......................31
TapeCounterMemoryStop................31
Lock(ChildLock)........................31
.31
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem................32
.32
WideScreenCompatibility16:9.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Tosetthedecoder......................32
.33
AdditionalOperation-DVDpart.
LastConditionMemory...................33
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................33
SpecialRecording.........................34
CopyingfromDVDtoVCR.................34
34
Recording from another video recorder
.
Operation
27-28
.
.
.
.
.
.
.
.
Reference
Controlling
Your TV with the
Supplied
Remote
Control................................35
Troubleshooting..........................36
LanguageCodeList.......................37
CountryCodeList.........................38
Specification.............................39
GeneralFeatures........................24
MovingtoanotherTITLE...............24
24
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................24
Still Picture and Frame-by-Frame Playback
25
Search.............................25
Random...........................25
.
.
.
.
Repeat............................25
RepeatA-B.........................25
TimeSearch........................25
3DSurround........................25
Zoom..............................26
MarkerSearch.......................26
About the
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
SpecialDVDFeatures....................26
TitleMenu..........................26
DiscMenu..........................26
CameraAngle.......................26
.26
ChangingtheAudioLanguage.
.26
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................26
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
play
can
a
DVD±R, DVD±RW,
Kodak PICTURE CD and CD-R
audio titles, MP3, WMA
(DVD only)
DVD
or
or
CD-RW that contains
JPEG files and SVCD also.
or
accompanying
feature content
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture
or a
musical
piece
that
are
smaller
than titles.
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
Notes
--
Depending
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
on
ment or the CD-R/RW
--
--
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
Track
(Video
Sections of
enabling
On
Regional
player
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "2" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
This DVD
4
on a
a
video CD
track number,
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
with the
and DVDs
only)
piece
assigned
musical
Scene
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
code of the DVD
or a
you to locate the track you want.
Video CDs
or
CD and audio CD
picture
audio CD. Each track is
or an
other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
a
PBC
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Before Use
(Cont'd)
Precautions
Storing
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
the unit
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
POWER
Tape Eject
Switches the unit to ON
or
OFF.
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
a
fast
to PREVIOUS
reverse
chapter/track.
search.
Rewinds the tape.
Forward
Skip/Scan, Fast-Forward (
chapter/track.
)
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the tape forwards.
STOP ( A ) Stops playback.
Disc
Tray
Insert
a
disc here.
PAUSE/STEP
Pause
press
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
DVD/VCR Selector
DVD OPEN/CLOSE
Opens
or
Tape Compartment
(
)
closes the disc tray.
VCR Record
EJECT
COPY
PROG.
DVD/VCR
Display
DVD to VCR
Copy
Audio IN
window
Video IN Jack
Remote Sensor
PLAY
( G)
Starts playback.
Point the remote control here.
Child Lock is
engaged
Channel
Programme Selectors.
DVD+VCR is in timer
timer
Indicates repeat mode.
(L/R)
Jacks
Shows the current status of the unit.
Button
recording
is
recording
programmed.
or a
A Cassette is in the VCR deck.
VCR deck is selected.
VCR
A disc is loaded in the DVD deck.
(Lights when a disc is loaded in the DVD
deck and flashes when no disc is loaded.)
recording
is
engaged.
DVD to VCR copy is in
progress.
Indicates TV mode.
(See
DVD deck is selected.
Notes
VCR
DVD
REC
TV
Indicates total
6
playing time/elapsed
time/current time
on
page
22.)
Remote Control
POWER
Switch this unit ON
or
OPEN/CLOSE
EJECT
Open or close the the disc
OFF.
DVD/VCR select button
operational mode of
remote control.
-
Selects
-
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
(see
TV VOL +/--:
or
picture
PAUSE/STEP (
)
playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access or remove setup menu.
RETURN
Remove the setup menu.
Displays the menu of a video CD
with PBC.
-
?
-
?
Access the On-Screen Display.
Shows you the current time or
?
?
FGDE(left/right/up/down)
?
PR/TRK(+/-)
-
Select the
?
?
Play
if available
image.
input sources
(Child Lock)
LOCK
on
into tape.
and off.
TITLE
menu
of the disc if
PROGRAM
Access or remove program menu.
?
MARKER
Mark any point during playback.
?
?
Repeat sequence.
recording speed of
RANDOM/CM SKIP ?
tracks in random order.
-
video
Display the title
available.
DISC MENU
a DVD disc.
the tape.
-
angle
Switch the Child Lock
ENTER/OK
selection.
menu
A-B/LP
-
camera
ZOOM
REC/ITR
Record your
-
of
language.
?
-
menu
subtitle
a
Enlarge
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
or
ANGLE
Select DVD
menu
(DVD)
SUBTITLE
Select
counter.
Access
AUDIO
Select an audio language
an audio channel (CD).
DISPLAY
CLK/CNT
Acknowledge
off TV sound.
SETUP/ i
Pause
-
on or
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
item in the
off the TV.
source.
Adjusts TV's volume.
MUTE: Turns
-
an
recording
TV PR +/--: Selects TV's channel.
forward.
VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
Select
on or
TV AV: Selects the TV's
(m/M)
the STOP mode, fast forward
for
34)
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
tray.
Tape Eject.
?
SEARCH
Display
CM SKIP
?
MARKER SEARCH
menu.
CLEAR
Clear
a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT
Repeat chapter, track, title, all.
-
-
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
DVD/VCR AUDIO
Connect to
an
OUT(Left/Right)
amplifier, receiver or
AUDIO OUT
Connect to
stereo
system.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
AERIAL
Connect the aerial
using
this
EURO AV2 DECODER
jack.
Connect to
DVD/VCR
AUDIO OUT
pay-TV
decoder
or
another video recorder.
AUDIO
OUT
R
R
L
L
COAXIAL
DVD EXCLUSIVE
OUT
EURO AV1 AUDIO/VIDEO
Connect to your TV set
COAXIAL
(VCR
or
IN+OUT / DVD
OUT)
another video recorder.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
RF.OUT
(DVD/VCR OUT)
using this jack.
Connect to your TV
AC Power Cord
Connect to
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
a
power
source.
Connections
Tips
Depending
on
your TV and other
equipment
you wish
to connect, there are various ways you could connect
the unit.
Please refer to the manuals of your TV, Stereo
or other devices as necessary to make the
PREATION
System
best connections.
For better sound
this unit's
AUDIO OUT
of your
reproduction, connect
jacks to the audio in jacks
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
Caution
--
directly to the TV.
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Make
sure
this unit is connected
Set the TV to the correct video
--
Connecting to
(or Satellite)
Make
the
one
of the
capabilities
TV & Decoder
following connections, depending
existing equipment.
on
of your
Basic connection
1
a
(AV)
Connect the EURO AV1 AUDIO/VIDEO
panel of this unit to
TV using a SCART
the SCART
input
on
the
socket
on
rear
the
lead.
Some TV broadcasters transmit encoded television
2 signals
which you can only see with a purchased
rented decoder. You can connect such a decoder
(descrambler)
or
to this unit.
DVD/VCR
AUDIO OUT
R
L
Basic connection
1
AUDIO
OUT
R
L
(RF)
Connect the RF antenna cable from your indoor/
jack on the rear panel
outdoor antenna to AERIAL
COAXIAL
DVD EXCLUSIVE
OUT
of this unit.
Connect the
2 jack
supplied RF cable from the RF.OUT
panel of this unit to your televiAntenna Input.
on
sion's
the
rear
9
Connections
Connecting
(Cont'd)/Important
notes on
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and
AUDIO OUT
this
Right
jacks
right in jacks on your amplifier,
system, using the audio cables.
on
this unit
controlling
If the audio format of the
the
capabilities of
produce a strong,
--
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the On-
Screen
Display,
press AUDIO.
unit to the audio left and
receiver
or
stereo
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
You will need to activate this unit's
2 (See "Digital
Audio
Output"
on
digital output.
page 19).
Important
notes on
controlling
this
unit
This unit
uses one
set of controls to
operate both DVD
and VCR. The
following buttons are helpful
successfully controlling each part.
1
POWER Button
Press the POWER button
front
2
in
panel
on
the remote control
or
to turn on this unit.
DVD Button
Press DVD button
on
the remote control when you
want to control the DVD.
The DVD indicator will
Digital
A
Multi-channel sound
digital multi-channel
quality. For this
connection
display
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
DVD/VCR
AUDIO OUT
AUDIO
OUT
R
R
L
L
COAXIAL
DVD EXCLUSIVE
OUT
Pro
10
Logic
II/Pro
Logic
3
light
on
the front
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
on
the remote control when
you want to control the VCR.
The VCR indicator will light on the front
display
panel
to show that the VCR is selected.
DVD/VCR Button
4 Press the DVD/VCR button
toggle
on
the front
panel
control between the DVD and the VCR.
to
Before
Tuning
Operation
in
a
-
VCR part
video channel
on
your TV
Notes
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
is
Your TV receives
recorder
signals
8
~
on
your TV should already have a dedicated video
channel built into it, usually called AV.
1
Make
VCR
2
i
Press PROG. 3
or 4
to select another video channel.
You may select any channel number between 22
and 68.
8
Select
a
TV channel number
on
which you wish to
watch videos.
Press
I
on
the front of your VCR when you
have finished.
Tune this channel
so
appears.
Store this channel
on
that
a
bright
blue
screen
your TV.
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
7
from the video
channel number
a
36
can also set it to "OFF" if there is any
interference when your TV is connected to the
VCR with a SCART lead.
your TV
and tune it in so that you may watch video
tapes. If you have used a SCART cable then
have to select
CHANNEL
You
like another TV station. You
(VCR)
RF
PSET
R
the
on
on
Notes
your VCR.
Make
your TV.
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
sure
VCR and
that you have correctly installed your
successfully tuned in a dedicated video
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
channel
unable to view and record video
watch video's.
tapes!
Don't worry if you don't have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
~
your TV until you
3
see a
bright
blue
Tune this channel until the video
screen.
picture
is
sharp
and the sound is clear.
If you have used
a
SCART cable you will not have
to tune your TV, simply select the AV channel. The
AV channel is already pre-tuned for optimum video
playback
on
your TV.
Store this channel
4 You
on your TV.
will need to look at the TV instruction book if
you do not know how to do this.
5
Only carry out stages 5 8 if you cannot obtain
clear video playback as described in stages 1
4.
~
~
Select
a
TV channel number
on
which you wish to
watch videos.
Make
sure
POWER
be
6
that your VCR is in
the remote control
on
standby pressing
(Only the clock will
displayed.).
Press PROG. 3
more
or 4 on
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
The
screen.
11
PREATION
Before
Operation
Using your
-
VCR part
unit for the very first time
The TV station table will appear when
3 complete.
tuning
is
Notes
For the
that you have just
connected your video recorder for the very first time.
To make tuning TV stations an easy task your VCR
01
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
04
C30
00
CH4
05
C37
00
CH5
incorporates the Automatic Channel Memory
System (ACMS). This system will automatically tune
07
following steps
we assume
06
08
PSET
R
--
--
--
--
--
--
-----
-----
-----
MOVE
:
DELETE
:
,
OKi
and store TV channels to your VCR. While this is
happening the clock (date & time) in the video recorder
will be set
automatically.
The ACMS system relies on signals transmitted by the TV
Station, for auto clock setting and station identification. If
signal is weak or fluctuates your VCR
may not detect the necessary information and will be
unable to identify station names and sort them correctly.
the TV broadcast
To
overcome
this
problem please
TUNING section of this book
1
Make
sure
on
turn to the MANUAL
page 15.
that you have correctly installed your
a video channel on your TV as
VCR and tuned
described earlier in this book.
on your VCR.
If you have a satellite receiver make sure that it is
connected to your VCR, switched on and Sky News
has been selected.
Press POWER to turn
(Initial
Menu
Screen)
D
ACMS
Pr-12
OKi
ACMS
If the initial Menu Screen doesn't appear
on
screen, make sure that you have tuned your
TV to
may
2
a
video channel. Or if this is correct it
mean
that your VCR is
already
Press OK to start the automatic
tuning
01
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
S
E
Pr-12
ACMS
12
i
tuned.
process.
Press i to store your TV stations and
TV station table.
remove
the
Before
Setting
Operation
the clock
VCR part
-
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
Your VCR is
Your VCR's clock is checked
continually against
by most TV stations.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
Teletext information broadcast
VCR detects
signal.
a
channel that broadcasts
If the broadcast
will not be set and will
1
a
Teletext
is weak the clock
signal
require setting manually.
or
2 to select TIME DATE.
Press OK.
The auto
mode
adjust
can
be set to "OFF"
D or E if you want to set the time
Press OK.
by pressing
can
It there
are
colour
colour system
1
Press i.
Press 1
equipped with dual colour standard,
play back a tape in PAL and MESECAM.
During playback your VCR detects the colour system automatically.
you
Press i.
2
The main
3
Press 1
or
Press 3
or 4
manually.
select the
problem please
manually.
menu
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
4 system used.
to select
according
to the COLOUR
AUTO: automatic colour selection,
PA L : PAL recordings,
AUTO
ADJUST
:
MESECAM: MESECAM
ON
recordings.
--
12
TIME
DATE
OK i
VCR
REC
fOSD
ON
OFF
AUTO
PAL
MESECAM
16:9
SYSTEM
Dr.
SYS-
NIC
TEM
i
DECO
4:3
DER
OPR
HHMNDDMMYY
--
:.
-
-
--
--
--
---
.
12
TIME
DATE
Press 1
5 Press
i
or
2 to select the RF AUDIO.
3 or 4 to
select
according
to the RF AUDIO
used.
2
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
When
entering singles numbers a 0
first, for example 1 must be entered
VCR
as
01, 2
as
RF I/I
RF B/G
RF D/K
REC
must be added
fOS
ON
OFF
02
SYSE
TEM
NIC
Dr.
16:9
4:3
DER
OPR
SYSTEM
i
etc.
of the week will appear
enter
the date.
you
The
day
automatically
when
6
Press i to
remove
the
menus
from the TV
screen.
HHMNDDMMYY
8
:.
0010104THU
.
12
TIME
DATE
3
4
If you make
a
mistake press 1
i
or
2 and enter the
correct details.
Press i.
13
PREATION
Before
How to
Operation
-
VCR part
the main
using
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
the
controlled from the Remote
menus are
Control Handset.
1
2
Turn on your TV set and video recorder
the POWER button.
by pressing
Press i button.
The main
will appear
menu
on
the TV
screen.
The
in TV Stations
guidance given
TV stations into your VCR.
1
on your VCR.
If you have a satellite receiver make sure that it is
connected to your VCR, switched on and Sky News
has been selected.
Press POWER to turn
Press i button.
The main
REC
Pr-12
SYS-
TIME
DATE
ACMS
+
16:9
4:3
TEM
Dr.
screen.
Press OK.
REC
NIC
-
DECODER
will appear on the TV
2 to select the ACMS.
menu
or
VCR
12
PSET
R
REC
use
perform the Automatic Channel
Memory System (ACMS) again please follow the
guidance given on this page. You may tune up to 88
Press 1
ON
OFF
page 12 is for first time
of your VCR.
Should you wish to
2
fOSD
on
Automatically
OKi
OPR
Timer
recording setting (see p. 23).
tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
TIME DATE Date & clock setting (see p. 13).
SYSTEM To set the Colour TV System
(see p. 13).
-
PR SET
Manual
-
VCR
12
-
REC
P
R SET
ON
OFF
Pr-12
ACMS
+
fOSD
16:9
4:3
SYS-
TIME
DATE
TEM
Dr.
Pr-12
NIC
-
DECODER
ACMS
OPR
OKi
-
O
-
RF AUDIO
To select the channel of audio
-
to your TV type
for PAL B/G TV, "D/K" for PAL
D/K TV, "I/I" for PAL I/I TV) (see p. 13).
output according
D
("B/G"
O
Dr.
O
(see p. 31).
F.OSD ON/OFF
O
16:9/4:3
O
DECODER
To check
-
-
problem
a
-
To
ACMS
Pr-12
OKi
ACMS
with your VCR
display
the
operational
VCR (see p. 31).
mode of your
To select the aspect ratio of your TV
3
Press OK
to start the automatic
tuning
process.
The TV station table will appear when
tuning
again
is
complete.
(see p.32).
O
OPR
-
-
To
use a
pay-TV
decoder
(or Satellite)
with your VCR (see p. 32).
To improve the playback picture
NIC
-
sound
(see
p.
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
04
C30
00
CH4
05
C37
00
CH5
06
07
(see
O
p. 21).
To activate or deactivate the NICAM
01
08
digital
PSET
R
Please note
-----
--
-----
--
--
-----
MOVE
:
DELETE
:
,
OKi
limited number of TV
currently only
4 companies transmit
the Programme Delivery
change the menu language on the DVD setup
(See the Menu Language on page 18.)
can
menu.
--
--
32).
Tip
You
--
3
Press 1 and 2 to select the desired
4
Press "i" to
Press OK and press 3
remove
the
or 4
menu.
to select the sub menu.
menu.
a
(PDC) signal which enables your VCR to
successfully identify and store them. If your VCR
has difficulty in identifying a TV station please turn
the page to find out how to manually tune in and
Control
name a
TV station.
While automatic
tuning is taking place the time and
automatically.
:appears in the VCR display it means that
broadcast signal is weak and the clock was not
date will set
If-
the
-
-
set. Please turn to CLOCK SET section of this
book
14
on
page 13.
Before
Tuning
In certain
Operation
VCR part
-
in TV Stations
areas
Manually
of the country broadcast
4
stop when it locates a station.
PDC, the station name will
Control the fine
of the station
tuning
by pressing
3
or 4.
You must tune in these weaker broadcast stations
1
will
If the station transmits
be added automatically.
Press 2 to select MFT.
signals
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
manually
Searching
in order for your VCR to store them.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
PR
CH
MFT
06
C40
00
STATION
screen.
CHANNEL/CABLE
Press OK.
AV
:
P SET
R
5
i
Press 2 to select STATION
your TV station.
that you may
so
name
Press OK.
The TV station
name
list will appear.
BBC1
12
REC
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
DECODER
BBC2
VCR
SYSTEM
ITV
Dr.
PSET
R
NIC
-
ANGLI
OKi
OPR
PR
CH
MFT
06
C40
00
BORDE
CH TV
WEST
GRANA
P
R SET
PR
01
CH
MFT
STATION
C26
00
BBC1
CHANNEL/CABLE
:
2
Press D or E to select
OK to select it.
6 Press
AV
PSET
R
OK i
a
station
name
from the list.
i
If your station
to
OK, but go
Press i.
name
isn't
stage
7.
the list do not press
on
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune
(for example,
PR
BBC1
BBC2
ITV
ANGLI
06).
PR
CH
MFT
06
C40
00
BORDE
CH TV
WEST
GRANA
01
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
04
C30
00
CH4
05
C37
00
CH5
06
07
08
--
--
--
--
--
--
PSET
R
P
SET
R
-----
7
-----
-----
MOVE
:
DELETE
:
change a TV station name manually
using the "standard" names.
can
Press 3
3
Press AV to select C
(Standard stations)
or
S
(Cable stations):
-
or 4
to select letters and numbers for the
station name.
Press 1 or 2 to move back and forth between
characters.
Press OK.
new
Press OK.
C02
rather
Press G.
OKi
,
You
than
OK i
C69, S01
-
S41.
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
to find the
required
PR
station.
C06
CH
MFT
STATION
C40
00
CH TV
PSET
R
PR
CH
06
C--
MFT
STATION
--
----
CHANNEL/CABLE
PSET
R
OK i
Press i, confirm the station
8 Press
:
AV
i
i
placement.
again.
Your new TV station has now been tuned into your VCR.
If you wish to manually tune other stations repeat
stages
1
-
8.
01
02
C26
C33
00
00
BBC1
BBC2
03
00
04
C23
C30
00
ITV
CH4
05
C37
00
CH5
06
C40
00
CH TV
07
--
--
08
--
--
PSET
R
-----
-----
MOVE
:
DELETE
:
,
OKi
15
PREATION
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions
given on this page will show you how you can simply
move them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
12
REC
REC
ACMS
+
fOSD
ON
OFF
Pr-12
16:9
4:3
TIME
DATE
DECODER
fOSD
SYSTEM
Dr.
ON
OFF
PSET
R
NIC
-
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
DECODER
VCR
SYS-
Dr.
TEM
PSET
R
NIC
-
OKi
OPR
OKi
OPR
PR
PR
01
PSET
R
VCR
12
PSET
R
CH
MFT
STATION
C26
00
BBC1
01
CH
MFT
STATION
C26
00
BBC1
CHANNEL/CABLE
CHANNEL/CABLE
PSET
R
2
Press i.
Press 3
AV
PSET
R
01
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
04
C30
00
CH4
05
C37
00
CH5
06
C40
00
CH TV
--
--
-----
--
--
-----
PSET
R
2
or 4 to select the programme number
you want to delete. (for example, PR 01)
01
C26
00
BBC1
02
C33
00
BBC2
03
C23
00
ITV
04
C30
00
CH4
05
C37
00
CH5
06
C40
00
CH TV
08
--
--
--
--
PSET
R
-----
-----
MOVE
:
DELETE
:
,
OKi
OKi
position
3
Press 1.
After a short while, the selected station will be
deleted.
The following stations are resorted automatically.
01
C33
00
BBC2
C26
00
BBC1
02
C23
00
ITV
02
C33
00
BBC2
03
C30
00
CH4
03
00
C37
00
CH5
00
CH4
CH5
04
04
C30
C37
05
C40
00
CH TV
05
C23
00
ITV
06
06
C40
00
CH TV
07
--
--
-----
--
--
-----
08
PSET
R
PSET
R
4
i
01
08
AV
Press i.
Press 3
07
Press D or E to place the cursor line at the
where to insert the selected programme.
(for example, PR 05)
07
:
i
to select the programme number
you want to move (for example, PR 03).
Press 2.
08
3
:
or 4
07
screen.
--
--
--
--
--
-----
-----
--
-----
MOVE
:
DELETE
:
,
OKi
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 2 4.
Press i to remove the menus from the TV screen.
4
If you wish to delete other TV stations repeat
2 3.
Press i to remove the menus from the TV screen.
stages
-
-
01
C26
00
BBC1
02
C33
00
BBC2
03
C30
00
CH4
04
C37
00
CH5
05
C23
00
ITV
06
C40
00
CH TV
07
08
PSET
R
16
--
--
--
--
-----
:
DELETE
:
,
selecting
Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
-----
MOVE
How to
OKi
Before
General
This manual
Operation
DVD
-
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
is not available
or
On-Screen
The
TV
general playback
screen.
1
2
3
Press 3
or
can
be
highlighted.
the
change
The number buttons
(e.g.,
Repeat
A-B
title
can
setting
of
press ENTER to execute the
For
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
play
from this
prohibited
or
point
not available
some
Some discs may not
Screen Display.
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
item.
an
be also be used for
number).
(non-PBC
Notes
during playback.
Press 1
numbers
AB
Action
4 to select an item.
2 to
Repeat
All Tracks
Resume
The selected item will be
or
ALL
displayed on the
changed on the menu.
display operation
Press DISPLAY
Track
status can be
Some items
On-screen
Repeat
OFF
Display
Title
Repeat Chapter
CHAPT
TRACK
the disc.
on
Repeat
TITLE
this unit. Some DVDs
Feedback Field Icons
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Shows the current title number and total number of
Title Number
1/3
Chapter
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
skips
to the desired title number.
D
5.1 CH
chapters,
and
Shows the
number and total number of
chapter
skips
to the desired
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
ABC
OFF
chapter number.
language,
number, and
language,
1/1
Sound
angles,
and
1/2,or
Numbers, ENTER
1/2,or
Numbers
,
ENTER
Numbers
,
ENTER
1/2,or
AUDIO
1/2,or
SUBTITLE
angle number and total
changes the angle number.
Shows the current sound
NORM.
and
changes the setting.
Shows the current
Angle
VCD2.0
and
Shows the current
Number
Subtitle language
titles,
Selection Method
mode,
number of
and
changes the setting.
1/2,or
ANGLE
1/2
VCD1.1
Items
Function (Press 3/4 to select desired item)
Shows the current track
Track Number
1/4
Time
Audio Channel
0:20:09
and PBC On
Shows the
mode,
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
Sound
channel,
changes the audio channel.
Shows the current sound
NORM.
changes the setting.
time
Selection Method
1 /2,or
Numeric, ENTER
(Display only)
and
--
1
/2,or
AUDIO
mode,
and
1/2
17
PREATION
Before
Initial
You
-
DVD
General
Settings
part
Menu
Settings
set your own Personal Preferences on this unit.
can
Initial
1
Operation (Continued)
Select
you
Language
a
see
Operation
Press SETUP.
The setup
menu
for the setup
language
appears.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
German
Rating
Italian
Country
TV
Original
Disc Subtitle
English
Disc Menu
Spanish
Rating
German
Code
Greek
Language
Digital
Audio
Output
Italian
Aspect
Menu
menu
Others
Country
TV
This is the
Portuguese
Code
Aspect
Menu
Disc Audio
menu.
when you press SETUP.
Portuguese
Greek
Language
French
Digital
Audio
Output
Chinese
Picture
Other-----------Others
TV
2
Press 3/4 to select the desired item.
While the desired item is
nected.
then
to
to
to
or
DVD
4:3 Letterbox: Select when a standard 4:3 TV is con-
The screen will show the current setting for the
selected item, as well as alternate setting(s).
press 2,
3 3/4 select the desired selected,
setting.
Press ENTER
confirm your selection.
4 Some items require additional
steps.
Press SETUP, RETURN
PLAY
exit the
5 setup
Aspect
Displays
theatrical
images
picture.
above and below the
with
connected. The video material formatted in the Pan &
Scan
style
picture are
is
played
off).
back in that
style (Both
Disc
Language
language
a
DVD
16:9 Wide: Select when a 16:9 wide TV is connected.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Country
for the disc's Menu, Audio, and
TV
Code
Aspect
Menu
Language
Subtitle.
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 37. If you enter the wrong language
Original
:
The
code, press CLEAR.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
Spanish
Rating
German
Country
TV
Code
Aspect
Menu
Italian
Portuguese
Language
Greek
French
Digital
Audio
Output
Chinese
Other------------
Others
18
sides of the
cut
Rating
Select
bars
4:3 Panscan: Select when a conventional TV set is
menu.
Language
masking
Digital
Others
Audio
Output
Before
Operation (Continued)
-
DVD
Sound
Digital
Others
Audio
Output
Each DVD disc has
The DRC, Vocal, PBC and Auto
of audio output
variety
options.
player's Digital Audio Output according to the
Set the
part
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
between On and Off.
Disc Audio
DTS decoder,
MPEG decoder.
or
a
a
the
Country
2-channel
MPEG2
or
TV
Digital
Disc Subtitle
Stream/PCM
Disc Menu
PCM
recording
sys-
/PCM
Rating
Country
TV
Code
Aspect
Menu
Digital
Audio
Sample Freq.
48 KHz
Language
96KHz
Sample Frequency
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
Output
Dynamic Range
Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Output
Others
To
Audio
digital
possible,
Disc Audio
Language
Others
tem.
DOLBY
DIGITAL
Off
Code
Aspect
Menu
decoder
amplifier.
Dolby Digital, MPEG1,
On
Play
Rating
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
on
On
Disc Menu
Auto
Dolby Digital
PCM: select when connected to
stereo
On
PBC
Dolby Digital decoder).
with
DRC
Vocal
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
be
can
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment with a
Play settings
changed.
Vocal
Set Vocal to On
only
DVD is
The karaoke channels
playing.
mix into
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto
Off:
Play function is activated.
Auto Play function is not activated.
Note
The Auto
Play
function may not work for
some
DVDs.
19
PREATION
Before
Operation (Continued)
-
DVD
Parental Control
Rating
Code
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
part
the disc. These
scenes on
scenes are
country-dependent.
country/area
whose standards
were
Code Set
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 38.).
Disc Subtitle
GB
Disc Menu
are
Rating
Country
The Parental Control feature allows
TV
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Language
Digital
Audio
Output
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
Code
4
Aspect
Menu
1
5
Country
Code
Country
setup
using
While
1
Audio
Output
Unlock
Country
2
step
3
4
5
6 selection,
Follow
Change
Others
Code is
1
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
tons to create a
is
3 of
"Rating"
Shift the
selected,
personal 4-digit security password,
4-digit password again
tons to confirm the
Changing
pass-
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
from 1 to 8
rating
(1) has
tons. One
has the most
Eight (8)
using
playback restrictions.
playback restrictions.
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
played. Higher
unless
an
rated
alternative
scenes
scene
If
will not be
is available
The alternative must have the
lower
same
on
rating
played
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5
one.
no
Press ENTER to confirm your
then press SETUP to exit the
20
1/2 buttons and select
using
using
3/4 buttons.
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
the
4-digit
code
1
Follow
3
Enter the old code, then press ENTER.
Select "Change" using the 3/4 buttons then press
ENTER.
4
Enter the
ENTER.
Enter
time and veri-
Steps
1-2 as shown above to the left
5
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
6
Press SETUP to exit the
(Rating).
menu.
1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
the 3/4 buttons.
2
the 3/4 but-
the least
using
Note
below
personal 4-digit security
left.
Confirmation of the
the code is
word, then press ENTER.
on
Press ENTER to confirm your country code
then press SETUP to exit the menu.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
a
cursor
the second character
press 2.
then press ENTER. Enter the
and press ENTER to verify.
Select
on
selected, press 2.
Select the first character
Select
"Rating"
the 3/4 buttons
menu.
3
2
Language
Digital
Select
the
rating selection,
menu.
If you
If you
forget
forget
your
your
4-digit
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
The
3
4-digit password is cleared.
Enter
a new
code
as
shown above to the left
(Rating).
with
Operation
Playing
You will
a
only
tape
playback, Shuttle :
or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
Slow motion
tape
be able to load and
eject video
cassettes
5 During playing back
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on PAL TV).
better
To switch off the slow motion and shuttle, press the
desired function.
Getting
a
When
cassette is inserted and
a
picture
playback started,
During
the
appear
automatic
tracking function works to get the best
possible picture automatically. If the quality of the
recording is poor, repeatedly press TRK + or on
the remote control to manually adjust the tracking
slow motion and shuttle, the noise bars may
on the picture according to the status of
tape.
If distortions
can
be
in the
seen
picture,
reduce
-
until any distortions have been removed. Press numbered 0 on the remote control to switch automatic
tracking
back
them with TRK
Press STOP to end
6
Picture search will
only
-.
playback.
Press EJECT.
If the end of the
again.
on
+ or
tape is reached, your VCR will stop
the tape.
playback automatically, rewind, stop, eject
continue for about 3 min-
utes, after which your VCR will return to normal
CM
playback. During picture search, logic search, and
CM Skip the sound is mute and there will be some
noise streaks on the picture.
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
(Commercial Message) Skip:
normal
playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
1
2
Make sure that you have correctly connected your
VCR as described earlier in this book.
Turn on your TV and select the video channel for
video playback.
Press POWER to turn on your VCR.
Insert the video cassette into your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press PLAY to start playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start automatically.
skip:
2 Press 60 seconds
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
(Optimum
Picture
Response)
This feature
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
Your VCR will
the best
press CM SKIP to
1 Press 30 seconds
OPR
AUTO TRACKING
give
material).
Repeatedly
automatically adjust
picture quality.
the
tracking
to
Press PAUSE/STEP to pause a picture.
PAUSE/STEP repeatedly to advance the still
picture frame by frame.
If you press FORWARD, the picture will be slowed
3 Press
down at about 1/19 times the normal
playback.
can be paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
Press TRK + or to reduce the vertical tremble
Tapes
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
.
-
during
still
picture.
OFF
SOFT
SHARP
R
4
Press PLAY to continue
Picture search:
playing
your tape.
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback speed) and
During playing
see
where you
are on
Logic search:
During fast forwarding
f
ON
OFF
4
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
3
or 4
MS
DECODER
SYSTEM
Dr.
NIC
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
or
SHARP.
playing
5
VCR
TIME
DATE
-
Please note you may
the tape.
or
Press
16:9
4:3
12
12
a
Press i to
only
set OPR when
tape.
remove
the
menus.
21
OPERATION
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
SP will
a
time
Recording (ITR) start recording
for
a set period of time or until the
immediately
Timer Recording you may record at a later time
(up to 1 month from the present). Up to 7 of these
automatic recordings may be set.
Your VCR
enables you to record up to twice the amount of
on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
when
quality
a
using
slight
loss in
picture
produce improved picture and sound quality,
provide twice as much recording
as
SP.
displayed in your VCR
let you know which you have selected.
or
LP will be
Press REC/ITR to start
6 RECORD
to
display
recording.
will appear on the TV screen.
Press REC/ITR several times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
which
incorporates Long Play (LP)
time
sound
SP
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
5 Standard Play.
7
Press PAUSE/STEP to avoid
recording
unwanted
scenes.
Press PAUSE/STEP to continue
recording.
If you press PAUSE/STEP during ITR, this unit will
enter the record pause mode and ITR is cancelled.
and
LP.
be paused for up to 5 minutes; RECP
displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
can
will be
1
Make
VCR
that you have correctly connected your
described earlier in this book.
sure
as
your TV and select the channel that you set
up for video playback.
Press POWER to turn on your VCR.
Turn
on
Insert
2 VCR.
video cassette with
a
protection
tab into your
8
Press STOP to end
recording.
Press EJECT.
EJECT will appear
on
the TV
screen
for
a
few
seconds.
If the end of the
tape is reached, your VCR will stop
the tape.
recording automatically, rewind, stop, eject
The video cassette should have the window side
facing
up and the
arrow
facing
away from you.
Notes
If you do not wish to record
3
4
Press PR
+
or
-
to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
you wish to record from is
AV 1 Sound and Picture
SCART socket
displayed.
recording using
the lower
the back of your VCR.
AV 2 Sound and Picture recording using the upper
SCART socket on the back of your VCR.
recording from VIDEO IN
Right) sockets on the front
AV 3 for
(Left
22
&
on
and AUDIO IN
of your unit.
on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
Remember you can
watching another by
record
one
programme
while
your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on your
TV.
starting
with
Operation
tape
recording using On Screen
Display
Timer
6
You may set up to seven timer record events within
one month of the current date.
Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing
3
or 4.
PR
Note
BBC1
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
1
2
3
DATE
TIME
16
1900
::
2000
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
video cassette with
Insert a
protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
i
or4toswitchPDConoroff.
If you are recording from stations that do not broadcast PDC switch PDC off! ( * symbol will disappear
on the TV screen).
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP,
7Press3
Press i.
Press 1 or 2 to select REC.
Press OK.
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
IP,
or
LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when PDC is ON.
replace.
Press 1 to delete the event.
PR
PR
DATE
--
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
BBC1
SP
--
--
--
--
19002000
::
SP
::
SP
~
--
--
--
--
SP
--
--
--
SP
--
--
--
SP
--
--
--
--
--
--
SP
--
TIME
16
--
SP
--
DATE
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
--
i
i
4
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example PR No. 1 as 01. You
may also select programme numbers by pressing 3
or 4. Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, repeatedly press
AV to select for correct display (AV1, AV2 or AV3).
8
-
PR
BBC1
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SATo record at the same time every week.
PR
DATE
TIME
--
BBC116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
DLYSUMOTUWETHFRSA
--
--
--
::
--
-~
are
correct.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
If you want to make other Timer recordings repeat
stages 3 8. Press i again to remove the menus.
Press POWER to switch your VCR Standby.
will appear in the display window while your VCR
waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
Press STOP to end recording.
-
9
SP
i
5
Check that the timer event details
Press i to save your settings.
--
OK i
Notes
If at a later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event.
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
The Programme Delivery Control (PDC) system
adjusts the start and end times of a timer record event.
This can be particularly useful with sports events which
may run over into extra time. The PDC signal is transmitted by the broadcaster and this controls your video
recorder's timer.
Currently only a limited
mit PDC signals.
number of TV
companies
trans-
Please make sure that when recording from channels that do not broadcast PDC that you turn PDC
OFF.
23
OPERATION
Operation
Playing
with DVD and Video CD
DVD and Video CD
a
Playback Setup
Turn
on
VCD2.0
DVD
the TV and select the video
nected to the DVD
General Features
Note
VCD1.1
input
source con-
player.
features may also be available
Audio system: Turn on the audio system
and select the input source connected to the
DVD
1
Moving
player.
Press OPEN/CLOSE to open the disc
Unless stated otherwise, all operations
described use the remote control. Some
2 facing
tray, with the label
a
Press OPEN/CLOSE to close the
3 READING
starts
appears
automatically.
The
a menu screen
is
may be displayed first after
Video CD which contains a menu.
or
loading
a
DVD
Use the 1 2
3
4
buttons to select the
than
more
title, you
one
to
can move
follows:
as
num-
title/chapter
you want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
to another CHAPTER/TRACK
a
title
on a
more
1/3
1 /12
VCD1.1
disc has
displayed
menu screen
DVD
disc has
DVD
When
appear
instead.
If
a
another title
Moving
tray.
might
DVD
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
the TV screen, and playback
If playback does not start,
menu
menu.
bered button
sure
on
press PLAY.
In some cases, the disc
to another TITLE
Setup
1/3
up.
double-sided DVD is inserted, make
the side you want to play is facing down.
When
the
tray.
When
Load your chosen disc in the
on
disc has
than
chapter/track
as
Press .
or
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
screen.
Note
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
menu screen.
DVD
1 Press m or M
during
You also may set PBC to Off under setup. See page
19.
2 Use the m or M to select the
and the exact
operating procedures
for
menu
Notes
Rating settings (not authorized),
"Parental Control",
DVDs may have a
Your
player
will not
different from your
player is 2 (two).
--
The
player
VCD2.0
VCD1.1
pause.
will enter SLOW mode.
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
--
the numbered buttons
Slow Motion
setting
the
using
--
two-digit numbers, press
(0-9)in rapid succession.
may differ depending on the disc.
Follow the instructions on the each menu screen.
Menu
--
For
To watch
a
DVD
(see
page 20).
region code.
on
play discs that have a region code
player. The region code for this
during
timer
recording standby
mode, press POWER and DVD to switch to DVD
mode.
24
Note
Slow motion
Video CD.
playback
in
reverse
is not
applicable
for
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
Frame-by-frame playback
VCD1.1
1 Press PAUSE/STEP
The
player
Video CDs
(continued)
will
now
Repeat
mX100
mode, press PLAY.
a
VCD2.0
VCD1.1
Repeat
A-B
A*
AB
To repeat
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
2 To return to normal
"NORMAL" appears
Tip
By pressing
>
on
the TV
sequence in
a
a
title:
at your chosen end point.
the TV screen, and the repeat sequence
again
briefly
point.
on
begins.
3 To cancel the sequence, press A-B.
0:20:09
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
during Random playback, the unit
(track) and resumes Random play-
back.
1 Press DISPLAY
play
appears
on
during playback.
the
The
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing time of the
current disc.
Notes
This function
2 Within 10
only
works with DVD Karaoke discs and
video CD without PBC.
the setup
page 19.
Repeat
CHAPT
menu
seconds, press 3/4 to select the Time
Search icon in the
on-screen
display.
The "-:--:--" appears in the Time Search box.
OnaVideoCDwithPBC,youmustsetPBCtoOffon
to use the Random function. See
3 Within 10
the
seconds,
required
use
the number buttons to enter
start time. Enter
onds from left to
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD2.0
DVD
TITLE
TRACK
VCD1.1
ALL
4 Within 10
-
seconds, press ENTER to confirm the start
time.
OFF
Playback
DVD Video Discs
Repeat Chapter/Title/Off
an
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
repeat the currently playing chapter, press
3D Surround
REPEAT.
The
2 To
VCD1.1
OFF
Time Search
press RANDOM until
the TV screen.
selects another title
1 To
screen.
screen.
playback,
on
VCD2.0
DVD
1 Press A-B at your chosen starting
A* appears briefly on the TV screen.
A B appears
1 Press RANDOM
The unit
the TV
on
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 19.
2 Press A-B
Karaoke DVD
All icon appears
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
The
setup
required
(backward)
or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Random
a
3 To exit
On
1 Press m or M during playback.
The player will now go into SEARCH mode.
2 Press m or M repeatedly to select the
3 To exit SEARCH
screen.
Note
VCD1.1
speed: mX2, mX4, mX16,
the TV
repeat the disc currently playing, press REPEAT
The
go into pause mode.
VCD2.0
press REPEAT.
playing,
on
second time.
picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.
DVD
Track/All/Off
Repeat
1 To repeat the track currently
The Repeat Track icon appears
2 To
during playback.
2 You can advance the
Search
-
Repeat Chapter icon appears
on
the TV
repeat the title currently playing, press REPEAT
second time.
The
Repeat Title icon appears
the TV
VCD2.0
VCD1.1
3D SUR
NORM.
a
This unit
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
The
on
DVD
screen.
can
produce
a
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
or
home theater system.
during playback.
2 Press 3/4 to select "NORM." or "3D SUR".
3 Press 1/2
repeatedly
until the desired sound is
selected.
25
OPERATION
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
Checking
during playback
or
still
playback
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
buttons to
picture.
3 Press CLEAR to resume normal
the
the
through
playback
or
the contents of DVD Video
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press ENTER.
magnification level
move
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
nine
can
and subtitle
multi-angle
1
DVD
VCD2.0
menu
may appear.
options,
angles, spoken language
chapters for the title.
and
start
playback
a
1 Press DISC MENU.
memorized
point. Up
to
be memorized.
can
The disc
is
menu
displayed.
2 To remove the disc menu, press DISC MENU
mark, follow these steps.
a
DVD
Disc Menu
from
again.
VCD1.1
MARKER SEARCH
points
To enter
menu, the menu will appear on the
3 To remove the title menu, press TITLE
1/9
You
a
Otherwise, the disc
2 The menu can list camera
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Angle
DVD
again.
1/1
memorize.
The Marker icon will appear
2
on
the TV
1 to enter up to nine Marker
Repeat step
If the disc contains
briefly.
screen
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
will start from the Marked
During
playback,
2
4
press SEARCH.
menu
will appear
on
the
ferent audio
repeatedly during playback
language or audio track.
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
DVD
Press SUBTITLE
different subtitle
SEARCH.
26
to hear a dif-
Press AUDIO
Press CLEAR.
remove
DVD
the Audio Channel
The Marker number will be erased from the list.
To
Language
Changing
VCD2.0
VCD1.1
a
dif-
ABC
1 ENG
repeatedly during playback
languages.
to see the
2 and 3 to erase additional Marker
numbers.
5
the Audio
screen.
Press 1/2 to select the Marker number that you want
Repeat steps
display.
ferent audio channel
to erase.
3
the
1 ENG
Press AUDIO
scene.
Marked Scene
disc
on
D
SEARCH.
The MARKER SEARCH
angle appears
a
5.1 CH
4 To remove the MARKER SEARCH menu, press
1
Changing
num-
3 Press ENTER.
a
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
To clear
recorded at different
to a different camera
press SEARCH.
2 Within 10
Playback
scenes
can
Note
the MARKER SEARCH menu, press
If
appears, the feature is not available
on
the disc.
Operation
with Audio CD and MP3 Discs
Playing an Audio CD and MP3/WMA Discs
CD
MP3
The DVD
Notes
MP3/WMA
Insert
1
play
Recordings
a
files that have
The
player
tray.
About
CD; Audio CD menu appears on the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
screen
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
ENTER.
appears on the TV screen.
to the MP3/WMA-JPEG
1.
2.
3.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
as
a
folder, and ENTER.
Press 3/4 to select
a
track then press PLAY
3 A list of files in the folder appears.
Media
or
compatibility
elapsed playing
menu.
move
to the
previous page.
Program
MP3 WMA
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK04
TRACK 3.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
TRACK 8.mp3
Clear All
NORM.
Audio CD
menu
00:00
Clear All
1
MP3/WMA
OFF
the
5
should be named
incorporate ".mp3"
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Pre-recorded DVDs
are
optimal
automatically
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
right
to
are
in
a
34 to
previous
To
or use a new one.
names
Customers should also note that
menu
Tip
the
MP3/WMA file in the 1st
of recordable disc formats
TRACK 5.mp3
STER.
no
set to these standards. There are many different
TRACK 4.mp3
TRACK05
If you
File
playback quality.
TRACK01
0: 56: 18
is
player
to the next page.
move
Program
TRACK08
with this
A
e.g. "********.MP3"
Press DISC MENU to
CD
offers double the audio
the MP3 format.
follows:
and must
Press TITLE to
use
6.
ENTER.
time will appear on the display window and
Playback will stop at the end of the disc.
Audio)
compression
Sampling Frequency / only at 44.1 kHz (MP3),
(WMA)
Bit rate / within 32-320 kbps (MP3),
32-128 kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
the disc
the current track's
Audio)
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
Press 3/4 to select
Playback starts.
During playback,
Media
Microsoft audio
first track. If there is
4
".mp3".
22.05-44.1 kHz
move
MP3 WMA
a
technology.
WMA(Windows
compression of
JPEG
menu
not read an MP3 file that has a file
WMA(Window
An WMA file is
MP3 WMA
Press RETURN to
choice menu.
can
extension other than
disc and close the
The MP3/WMA
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
Audio
2
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
can
MP3/WMA
About MP3
WMA
Player
on
file list and want to return to the Folder list,
and press ENTER to return to
highlight
always
be
sought
from the
copyright
owner.
menu screen.
stop playback
at any other
time, press STOP.
27
OPERATION
with Audio and MP3/WMA Discs
Operation
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To repeat
1
press
CD
another Track
MP3
WMA
Press . twice
track.
case
to
briefly
step back
to the
previous
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
CD
MP3
WMA
repeat all tracks
on a
disc, press REPEAT
a
icon and "ALL" appears
on
the
CD
MP3
WMA
repeatedly to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
mode, press PLAY
CD
1 Press RANDOM
MP3
2.
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random
"RAND." appears on the menu screen.
2 To return to normal
28
point.
Playback
and
playback, press RANDOM
disappears on the menu
until "RAND."
Repeat icon and "OFF" appears
3D Surround
This unit
can
produce
on
the
screen,
play,
press
menu screen.
CD
a
3D Surround effect, which
speakers normally required
multi-channel audio from
a
or
to listen to
home theater system.
1 Press DISPLAY or AUDIO
during playback.
repeatedly
until the desired sound is
Changing
the Audio Channel
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
2 Press m or M
screen.
at your chosen end
menu screen.
selected.
1 Press m or M during playback.
The player will now go into SEARCH mode.
repeatedly
the
3 To exit the sequence and return to normal
A-B again.
3 Press 3/4
menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
Random
again
on
2 Press 1/2 to select "NORM." or "3D SUR".
second time.
Search
Repeat icon and "A*" appears
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
more
screen.
Repeat
press A-B at your chosen
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu
The
sequence.
2 Press A-B
The
the track number
2 To
a
CD
The
Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
In
A-B
During disc playback,
starting point.
The
Moving to
(Continued)
Operation
Viewing
a
with JPEG Disc
JPEG disc
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
1
Insert
a
disc and close the
TV
menu
appears
on
the
screen.
JPEG
menu
appears
on
the TV
>
once
1 Press PAUSE/STEP
during viewing a picture
to the previous file.
to
or
screen.
JPEG
player
Folder2
Folder4
now
Press 3/4 during showing a picture
picture horizontally or a vertically.
To rotate
picture
Folder3
will
flip the picture
Press 1/2
Folder1
OPERATION
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
To
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
or
Still Picture
MP3 WMA
2
to another File
Press .
advance to the next file
tray.
The MP3/WMA-JPEG choice
Moving
to
flip
the
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder5
Folder6
Folder7
Folder8
Slide
Press 3/4 to select
a
Speed
Notes
Off
folder, and ENTER.
3 A list of files in the folder appears.
Press RETURN to
choice menu.
move
to the MP3/WMA-JPEG
Depending
"
use
"
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
highlight
and press ENTER to return to the
previous
4
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
too
big
---
reduce the resolution of the JPEG files
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
move
Press DISC MENU to
pixels
and burn another disc.
Total number of files and folders
on
the disc should
be less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
If you want to view a particular file, press 3/4 to
highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
JPEG
upon the size and number of the JPEG
a long time for the DVD player to
to less than 2 mega
are
Recordings
screen
Tip
list,
JPEG
files, it could take
are
If you
on
to move to
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
into the CD
If the files have
to the next page.
move to the previous page.
rename
File
Folder1
shown
by
as
".jpe"
".jpg"
as
layout.
".jpeg" extensions, please
files.
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
be read
Picture1.jpg
them
or
without
this DVD
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
Off
5/32
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
Speed
then press 3/4 to select the
option
you want to
use, and press ENTER.
To
stop viewing
5 The JPEG
menu
at any other
time, press STOP.
appears.
29
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
VCD1.1
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 19.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
on the right side of the menu screen.
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
playback
is
stopped.
will appear.
menu
Program
VCD
tray.
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
Program
to
the
place
list.
Note
2 to
Repeat step
Program list.
3
place
E
Program
CD
additional tracks
the
Program
MP3 WMA
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 2.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 7
Clear All
TRACK 8
STER.
0: 56: 18
Audio CD
00:00
programmed track you selected last is highlighted
on
5 playing.
programmed
on
the TV
screen.
Tracks
currently playing,
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks
have played once.
a
from
To cancel
to the next page.
Press DISC MENU to move to the previous page.
resume
Edit
playback
with
left.
on
The
Press TITLE to
playback,
"Programmed Playback
Repeat icon and "TRACK" appears
The
Press 3/4 to select the track you want to start
7
menu.
PROGRAM.
To repeat the track
the program list.
To
normal
Repeat Programmed
menu
Press 2.
The
resume
"NORMAL" appears
OFF
3
MP3/WMA
menu
2-6 of
Program
Clear All
TRACK 8.mp3
NORM.
steps
PROGRAM to exit the
4 playback, press
TRACK 5.mp3
TRACK 6
Follow
or
Audio CD and MP3/WMA disc"
To
TRACK 3.mp3
TRACK 4.mp3
Press RETURN
3
E
TRACK 8.mp3
TRACK 1
TRACK 5
4
on
normal
playback
on
the
Program list
mode;
track of CD
E
mark will
programmed
Program
and select
disappear
(or MP3/WMA) list and then
press
ENTER.
"PROG." indicator disappears
on
the
a
menu screen.
Track from
Program
List
1 Press PROGRAM
MP3/WMA disc
Program
from
press PROGRAM to exit the
the
Erasing
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to move to the
Program
list.
3 Use 3/4 to select the track that you wish to erase
from the
Program
list.
4 Press CLEAR.
The track will be erased from the
Erasing
1 Follow
List"
as
the
Program list.
Complete Program
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear
The
All", then press ENTER.
complete Program for the disc will be erased.
The programs
30
are
also cleared when the disc is removed.
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
OPERATION
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left
the
on
to remove all
ON
OFF
screen.
displays
Pr-12
PSET
R
ACMS
fOSD
+
16:9
4:3
TIME
DATE
SYS-
-
DECODER
TEM
NIC
VCR
VCR
Dr.
Dr.
OKi
OPR
VCR
Dr.
from
VIDEO DOCTOR
HEAD STATUS
TAPE STATUS
screen.
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
i
Tape
The
Counter
Memory Stop
Counter
displayed on the display
window instead of the time by pressing CLK/CNT on
the remote control. The Digital Tape Counter indicates
the relative positions of recordings on the tape.
Digital Tape
can
be
2
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
1
Press CLK/CNT.
O
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
Insert
recording.
will display the
Press STOP when
playback
or
actual
play
O
recording
is
tape with its protection tab in place
NO. OF TIMER PROGRAMME
time in
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
complete.
Press BACKWARD.
O
BBC1 26 10:00~11:00SP
Shows the current status of timer
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
3
Lock
a
start
The tape counter
hours, minutes and seconds.
2
NOT RECORDABLE:
recording.
Press i.
(Child Lock)
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
1
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
pressed
a
few
seconds.
2
Press LOCK
again
to switch off the child lock.
OFF will appear in the
display
window.
31
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record
In addition it has
VCR part
-
System
2
4:3 or
back Wide-Screen
programmes
programmes
as
normal.
and
recording
Normal format
16:9:
another Hi-Fi VCR.
digital
AUTO,
Wide-Screen and Normal
Only
playing back and recording Wide-Screen
recordings (16:9).
for
format
Your VCR's NICAM
to select:
as
Only for playing back
recordings (4:3).
and two VHS Hi-Fi stereo audio tracks. These stereo
1
repeatedly
4:3
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
or
E
Automatically plays
decoder. This allows you
sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track
audio system, video disc
or
16:9.
AUTO:
playback Hi-Fi stereo sound.
digital stereo sound
to record and playback the
and
stereo NICAM
a
Press D
sound decoder allows
you to enjoy broadcasts with NICAM sound, as well
as standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
briefly displayed on the TV screen for a
couple of seconds:
VCR
12
will be
REC
PSET
R
fOSD
ON
OFF
Pr-12
ACMS
+
16:9
4:3
-
DECODER
AUTO
Dr.
16:9
4:3
4:3
16:9
i
STEREO NICAM
Sound is
and
automatically
recorded
the Hi-Fi stereo
on
tracks of the video tape.
BIL NICAM
mono
Both audio channels will be recorded
stereo tracks. The
will be recorded
the
mono
(left)
the
menus
from the TV
screen.
cable.
To set the decoder
We have
The sound is recorded
mono
already described, how to connect a decoder
pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
for
MONO
on
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
repeatedly
separation.
until the desired audio
mode appears.
3
remove
enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART
track of the video
tape.
2
Press i to
To
the Hi-Fi
channel
primary language
on
on
3
1
Press F
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is
output onthe left channel and the secondary channel is output simultaneously from the right channel
when audio output is set to STEREO. The primary
language willbe output from both channels when the
audio
setting
menu
or
will appear
on
the TV
screen.
G to select the DECODER.
Press OK.
2
Press D
or
E to select.
ON: When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
is MONO.
Please note that when
Press i.
The main
adjusting
the
tracking
socket.
control
Hi-Fi stereo sound may revert to MONO.
Wide Screen
Compatibility
3
16:9
Your VCR can record and play back wide screen aspect
ratio programmes (16:9). To record a wide screen format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
1
Switch
your VCR.
on
Press i.
Press F
or
G to select 16:9/4:3.
Press OK.
PSET
R
ON
OFF
32
Pr-12
ACMS
+
16:9
4:3
TIME
DATE
-
DECODER
OPR
SYSTEM
NIC
Dr.
VCR
12
VCR
12
REC
fOSD
REC
16:9
4:3
fOSD
OKi
ON
OFF
PSET
R
Pr-12
ACMS
+
16:9
4:3
-
DECODER
AUTO
4:3
16:9
Dr.
16:9
4:3
i
Press i to
remove
the
menus
from the TV
screen.
Additional
Operation
Last Condition
DVD
This
CD
-
DVD
part
Memory
VCD1.1
memorizes the last condition for the last
player
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the
player.
If you load
a
disc that has its
settings
OPERATION
memo-
rized, the latest stop position is automatically recalled.
Notes
--
--
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The
screen saver
DVD
Player
in
picture
appears when you leave the
stop mode for about five minutes.
33
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording from
a
DVD to
a
recorder
protected,
1
2
to copy is copy
not
be
able
to copy the disc.
you may
are
3 Copy
a
videotape
the DVD to VHS
Press the COPY button
into the VCR deck.
camcorder.
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
If the DVD disc
Play
the
menu
button
1
as
VCR A.
Tape
or
REC/ITR button
on
to
begin copying.
the
of your unit
your unit.
panel
panel of
rear
or
the AV sockets
Insert the recorded tape into VCR A and
into VCR B.
2 tape
on
a
blank
Press AV until the socket you wish to record from is
3 display. (VCR B)
Process
Copy
4 Stop
When the
is finished playing, press STOP
DVD
on
the
appears, you may need to
manually
VCR A should be connected to the SCART socket
the front
The DVD will go into Play mode and the VCR will
go into Record mode.
AV 1 Sound and Picture
to
SCART socket
recording using
the lower
the back of your VCR.
AV 2 Sound and Picture recording using the upper
SCART socket on the back of your VCR.
end the copy.
You must stop the
Copy process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
on
recording from VIDEO IN
Right) sockets on the front
AV 3 for
(Left
&
To start
4 and
5
34
from
Note
panel.
press the
recordings
from another video
Tape
blank VHS
unit front
make
In the
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS
or a
can
copying
attempting
Insert Disc
Insert
recorder
With this video recorder you
an external source, such as
Note
If the DVD you
another video
press the REC/ITR
VCR A.
recording,
PLAY
on
and AUDIO IN
of your unit.
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
Controlling
You
can
Your TV with the
control the sound level,
switch of your LG TV with the
input source, and power
supplied remote control.
Controlling
can
control your TV
using
the buttons below.
other TVs with the remote
control
You
You
Remote Control
Supplied
can
control the sound level,
input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1.
While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
TV Control
Buttons
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
If
more
them
than
one
code number is listed, try
entering
at a time until you find the one that works with
one
your TV.
By pressing
You
TV POWER
Turns the TV
TV AV
Switch the TV's
can
on or
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
off.
input
source
between the TV and other
input
Notes
your TV, some or all buttons may not
the TV, even after entering the correct
manufacturer code.
Depending
sources.
TV PR +/--
Scans up or down through
memorized channels.
TV VOL +/--
Adjust
MUTE
Turns
the volume of the TV.
on or
Manufacturer
off TV sound
function
on
on
If you enter
previously
a new
code number, the code number
entered will be erased.
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
setting. Set
the
appropriate
code number
again.
35
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
VCR do not
or
work
properly.
before
problem
a
service.
contacting
Cause
Symptom
DVD
of
DVD
or
Correction
VCR button is not switched
Refer to page 10.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert
No
The TV is not set to receive DVD
picture.
signal
a
Select the
the TV
player
No sound.
not start
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
are
not connected
properly.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
Digital Audio Output
position.
is set to the
The disc is dirty.
The TV channels
An
unplayable
are
not tuned in
properly.
placed
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
Place the disc with the
down.
down.
within the
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
disc is inserted.
placed upside
Set the
correct
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
recording
jacks
securely.
The disc is not
does not work
Connect the audio cable into the
jacks
securely.
The disc is
The remote control
screen.
equipment connected with the
audio cable is not set to receive DVD
The
player does
playback.
the TV
securely.
wrong
The DVD
on
securely.
The
is poor.
appears
The video cable is not connected
The audio cables
picture
appropriate video input mode
the picture from the DVD
so
Connect the video cable into the
signal output.
The
disc.
on
output.
cord into the wall outlet
are
empty?
properly.
properly.
Eject
the batteries with
or
side
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Make sure NICAM in the menu is set to
AUTO for the station to be recorded.
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned. This
should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred
or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged
tapes might.
36
Language Code
Enter the
(See
appropriate
18).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
37
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country Code" (See
page
20).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
ET
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
Spain
Ethiopia
LI
AF
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
Belgium
GL
Greenland
MO
Macau
SZ
Swaziland
BE
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
Guyana
MZ
Malaysia
Mozambique
TO
Tonga
BT
Bhutan
HK
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
Central African
ID
Indonesia
NO
UG
CG
Congo
IE
Ireland
NP
Norway
Nepal
CH
Switzerland
IL
Israel
NR
Nauru
UM
Uganda
United Kingdom
USA Minor Outlying
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Oman
UY
Uruguay
Cameroon
IQ
Territory
Iraq
OM
CM
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
Virgin Islands (British)
CV
Cape Verde
JP
PL
Poland
VI
Virgin Islands (USA)
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Japan
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Republic
Germany
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
Mayotte
DM
Dominica
KP
North Korea
QA
Qatar
YU
Yugoslavia
(Keeling) Islands
Republic
Anguilla
UK
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
38
Republic
(French)
Specification
General
Power
requirements
AC 200-240V, 50 Hz
Power
consumption
19W
Dimensions
Mass
430 X 78.5 X 270
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
to
REF NC
95˚F)
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75 ohms, unbalanced
Vp-p,
(SCART)
(RCA)
(SCART/RCA)
Outputs (DVD)
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600
Ω, RCA jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
subject
to
change
75 ohms, unbalanced
(SCART)
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
are
trademarks of
Dolby
Laboratories.
"DTS" and "DTS Digital Out"
are
trademarks of
Digital Theater Systems,
Inc.
39
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
the
provide
services in order to
following
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the guarantee to the
B.
The dealer is not
made to the apparatus,
apparatus is removed, defaced, misused,
C.
or
altered.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
original purchaser.
to carry out service under guarantee if unauthorized modifications are
or if non standard components are used or if the serial number of the
obliged
Aerial
or worn
alignment
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO : 3834RV0008U
Download PDF