LG | DVC9800 | LG DVC9800 Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DVC9800
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Safety Precautions/Important
notes on
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINI-
CAUTION
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DIS-
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE
SCAN PICTURE
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
this unit
controlling
PROBLEMS, IT IS ECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL
DVD
625p
PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
PERSONNEL.
SERIAL NUMBER: The serial number is found
This
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
of your old
appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
a
to
___________________________________
Disposal
product.
WARNING: Do not install this equipment in
such as a book case or similar unit.
the back of
this unit. This number is
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
TRIC
on
confined space
help prevent potential negative
consequences
for the environment and human health.
4. For more detailed information about disposal
of your old appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner 's
manual carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
POWER: This unit
operates
Notes
on
copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
2
mains
supply
of
200-240V~,
50Hz.
WIRING: This unit is
with
BSI 1363
approved 13
amp mains plug, fused at 5 amp. When replacing the fuse
always use a 5 amp BS 1362, BSI or ASTA approved type.
Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer or "LG Electronics
U.K.Ltd." If the type of plug supplied is not suitable for the
mains sockets in your home, then the plug should be removed
and a suitable type fitted. Please refer to the wiring instrucsupplied
a
tions below:
WARNING: A mains
unit must be
plug removed from the mains lead of this
destroyed. A mains plug with bared wires is haz-
ardous if inserted in
This product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
on a
a
mains socket.
Do not connect either wire to the earth
letter E
or
with the earth
green and yellow.
If any other plug is
or
fitted,
symbol
use a
5 amp
pin,
or
coloured green
or
fuse, either in the plug,
at the distribution board.
IMPORTANT: The wires in this mains lead
accordance with the
-
marked with the
BLUE:
NEUTRAL,
following
are
coloured in
codes:
BROWN: LIVE
-
As the colours of the
wires in the mains lead of this unit may not correspond with
the coloured marking indentifying the terminals in your plug,
proceed
as
follows: The wire which is coloured blue must be
connected to the terminal which is marked with the letter N
or
coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L
coloured red.
or
Table of Contents
.3
.26
WideScreenCompatibility16:9.
27
Recording from External Components
CopyingfromDVDtoVCR.................27
.28-30
OperationwithDVDandVideoCD.
PlaybackSetup.........................28
BeforeUse..............................4-5
GeneralFeatures........................28
PlayableDiscs...........................4
MovingtoanotherTITLE...............28
28
Moving to another CHAPTER / TRACK
Introduction
.
SafetyPrecautions.........................2
2
Important notes on controlling this unit.
.
.
.
.
.
.
.
.
TableofContents..........................3
Aboutthesymbolsforinstructions.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MoistureCondensation....................4
.4
RemoteControlOperationRange
Precautions.............................5
NotesonDiscs..........................5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlowMotion.........................28
Still Picture and Frame-by-Frame Playback 29
Search.............................29
TimeSearch........................29
MakerSearch.......................29
.
.
AboutSymbols..........................5
SelectingtheViewingSource................5
Repeat............................29
RepeatA-B.........................29
FrontPanel...............................6
DisplayWindow............................7
RemoteControl............................8
RearPanel................................9
Zoom..............................29
.30
ChangingtheAudioChannel.
Preparation
ScreenSaver........................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVStations.....................16
.17-19
BeforeOperation-DVDpart.
GeneralOperation.......................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AUDIO................................19
.19
DolbyDigital/DTS/MPEG.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack...............34
RepeatTrack/All/Off.................34
Search.............................34
Random...........................34
RepeatA-B.........................34
ProgrammedPlayback....................35
.35
RepeatProgrammedTracks
35
Erasing a Track from "Program" List.
.35
ErasingtheCompleteProgramList.
ViewingaJPEGDisc.......................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow............................36
StillPicture............................36
MovingtoanotherFile....................36
.
OTHERS..............................19
PBC..............................19
AreaCode..........................20
.
.
.
AutoPlay...........................19
LOCK(ParentalControl)..................20
Rating.............................20
Password(SecurityCode)..............20
.
MaintenanceandService..................32
33-35
Playing an Audio CD or MP3/WMA Disc
Audio CD and MP3/WMA Disc Features.
34
Pause.............................34
SampleFreq.(Frequency)..............19
.19
DRC(DynamicRangeControl).
.
.
AdditionalOperation.......................32
On-ScreenDisplay-DVD.................32
.
TVAspect..........................18
DisplayMode........................18
ProgressiveScan....................18
VideoOutput........................18
.
.
MenuLanguage......................17
.
.
Subtitles...........................30
31
Controlling other TVs with the remote control
LANGUAGE............................17
DiscAudio/Subtitle/Menu.
.17
DISPLAY..............................18
.
CameraAngle.......................30
.30
ChangingtheAudioLanguage.
.
Howtousethemainmenu................14
.14
TuninginTVStationsAutomatically.
.15
TuninginTVStationsManually.
.16
ChangingtheorderofTVStations.
.
TitleMenu..........................30
DiscMenu..........................30
.
.
.
.
VideoModeSetting...................30
SpecialDVDFeatures....................30
.11
ConnectingtoOptionalEquipment.
.12-16
BeforeOperation-VCRpart.
.12
TuninginavideochannelonyourTV.
Initialpreset............................12
SettingtheclockManually.................13
Tosetthecoloursystem..................13
.
.
LastSceneMemory...................30
InstantReplay.......................30
Connections...........................10-11
10
Connecting to a TV & Decoder(or Satellite)
.
.
Zoom.................................36
Torotatepicture.........................36
Reference
LanguageandAreaCodeList...............37
LanguageCodeList......................37
AreaCodeList..........................37
Troubleshooting..........................38
Specification.............................39
Operation
Operationwithtape.....................21-24
Playingatape..........................21
.21
CM(CommercialMessage)Skip.
OPR (Optimum Picture Response).
21
InstantTimerRecording...................22
Timer recording using On Screen Display
23-24
.25-27
AdditionalOperationwithtape.
.25
Hi-FiStereoSoundSystem(NIC).
OnScreenDisplay(F.OSD)..............25
TapeCounterMemoryStop..............25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
About the
symbols
.
for instructions
Indicates hazards
itself
.
or
other
likely to cause
material damage.
harm to the unit
.
.
.
.
.
Note: Indicates
Tip:
Indicates
special operating
tips
and hints for
features of this unit.
making
the task easier.
Tosetthedecoder.......................25
.26
VideoDoctor(Self-Diagnosis).
.
.
.
.
.
.
.
.
.
.
.
.
3
INTRODUC
Before Use
Playable
Track
Discs
Sections of
(VCD)
(8cm/12cmdisc)
On
(8cm/12cmdisc)
CD-R/RW that contains audio
DVD±R/RW and
titles, MP3, WMA
on a
a
video CD
track
number,
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into
sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
Audio CD
play SVCD,
only)
a picture or a musical piece
CD. Each track is assigned
Scene
Video CD
can
CD and audio CD
you to locate the track you want.
enabling
(8cm/12cmdisc)
addition, this unit
audio
or an
DVD
In
(Video
a
you to locate the scene you want.
A scene is composed of one or several tracks.
or
JPEG files.
of video CDs
Types
There
are
two
types of video CDs:
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs cannot
be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
on
PBC
with the
functions, or other
typical computer-like operations. Moreover, still pictures
of
system via
resolution
high
menus, search
can
be
played
if
they
are
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
code of the DVD
player
and DVDs
This DVD
player is designed and manufactured
for playback of region "2" encoded DVD soft2
ware. The region code on the labels of some
DVD discs indicates which type of player can
play those discs. This unit can play only DVD discs
labeled "2" or "ALL". If you try to play any other discs, the
message "Check Regional Code" will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
limits.
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Remote Control
Operation Range
Point the remote control at the remote
press the buttons.
Distance: About 23 ft
remote
Angle:
remote
(7 m)
Disc-related terms
(DVD only)
The main film content
or
accompanying
feature content
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
or
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enable you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
4
and
sensor
from the front of the
sensor
About 30° in each direction of the front of the
sensor
Remote control
AAA AAA
battery
installation
Detach the
battery
the remote
control, and insert
cover on
the
rear
of
two
(R03/AAA) size batteries with
and
aligned correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Title
included in
DVDs and Video CDs
Some
Regional
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
Before Use
(Continued)
Cleaning
Precautions
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center out.
When
setting the unit
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
the surface clean
insecticide spray,
the unit. Do not leave rubber of plastic products in
use
volatile
contact with the unit for
leave marks
on
such
liquids,
a
as
long period
of time.
They
will
a
"
soft, dry cloth. If the surfaces
soft cloth
use a
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
alcohol,
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes
on
Handling
may appear on the TV
This icon means the function
during operation.
explained in this owner's
screen
manual is not
available
on
permitted by the DVD+VCR
that specific DVD video disc.
or
is not
symbols
A section whose title has
applicable only
DVD
VCD
Video CDs.
CD
Audio CDs.
MP3
WMA
JPEG
Discs
following symbol is
represented by the symbol.
one
to the disc
DVD
for instructions
of the
MP3 disc.
WMA Discs
JPEG disc.
discs
Hold the disc
get
symbol display
"
playback side of the disc.
by the edges so that fingerprints
Selecting
Do not touch the
on
Symbols
About the disc
a
records.
vinyl
the surface
of the unit.
To obtain
About
About the
To clean the cabinet
Use
spray intended for older
the surface.
the unit
Cleaning
use
You must select
will not
VCR)
the surface.
Do not stick paper
or
tape
on
the
to view
on
Viewing Source
of your output
the TV screen.
one
sources
(DVD
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
the disc.
or
?
and
output
source
of DVD deck is viewed
on
the TV
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
screen.
?
and
Storing
After
store the disc in its
?
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunthere may be a considerable
increase inside the car.
light,
as
source
of VCR deck is viewed
on
the TV
screen.
Notes:
discs
playing,
output
lights
temperature
If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode
automatically.
?
If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode
automatically.
5
INTRODUC
Front Panel
POWER
Switches the unit to ON
OFF.
or
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
Rewinds the
Disc
Starts
fast
reverse
chapter/track.
search.
tape.
Tray
PLAY
a
to PREVIOUS
Insert
disc here.
a
( G)
playback.
Forward
Go to
Skip/Scan, Fast-Forward (
NEXT chapter/track.
Press and hold for two seconds for
Winds the
a
)
fast forward search.
tape forwards.
Tape Eject
STOP
A
(
) Stops playback.
DVD OPEN/CLOSE
Opens
or
Tape Compartment
(
)
closes the disc
tray.
DVD/VCR Selector
Audio IN
(L/R)
Display
Jacks
Video IN Jack
window
Shows the current status of the unit.
Channel
Remote Sensor
Point the remote control here.
6
Programme
Selectors.
Display
Window
The DVD deck is selected.
A disc is in the DVD deck.
(Lights
when
a
disc is in the DVD deck and Flashes when
Indicates the
Progressive
Indicates
no
disc.)
INTRODUC
Scan is set to On mode.
repeat mode.
Child Lock is
engaged
DVD+VCR is in timer
recording
is
recording
programmed.
or a
timer
A cassette is in the VCR deck.
The VCR deck is selected.
DVD
VCR
P
REC
TV
Indicates TV mode.
(See
Notes
VCR
on
page
recording
21.)
is
engaged.
DVD to VHS copy is in progress.
Indicates total
current deck
playing time, elapsed time, remaining
status (Playback, Pause, etc).
time
or
7
Remote Control
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
OPEN/CLOSE
EJECT
Open or close the disc
-
-
(see
-
VCR: Rewinds the
STOP
mode, for fast
forward.
TV VOL +/--:
tape during the
reverse
?
Access
the
with PBC.
Displays
?
?
menu
?
Play
language (DVD).
subtitle
a
language.
LOCK
input sources
(Child Lock)
Switch the Child Lock
?
ENTER/OK
menu selection.
the title
available.
DISC MENU
of a DVD disc.
into
tape.
and off.
on
TITLE
Display
menu
of the disc if
PROGRAM
Access or remove program menu.
MARKER
Mark any point during playback.
?
?
?
Repeat sequence.
recording speed of
?
tape.
SEARCH
Display
RANDOM/CM SKIP
tracks in random order.
CM SKIP
?
-
audio
an
REC/ITR
Record your
-
the
video CD
?
-
Select the
a
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
of
ANGLE
Select DVD camera angle if available
ZOOM
Enlarge video image.
PR/TRK(+/-)
-
menu
?
FGDE(left/right/up/down)
A-B/LP
menu.
SUBTITLE
Select
counter.
menu
setup
AUDIO
Select
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
Access
or remove
RETURN
?
Acknowledge
off TV sound.
SETUP/ i
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
-
on or
TV's volume.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
PAUSE/STEP (
)
Pause playback temporarily / press
repeatedly for frame-by-frame
item in the
Adjusts
MUTE: Turns
search.
an
source.
TV PR +/--: Selects TV's channel.
picture
search and Advances the tape during
the STOP mode, fast forward picture
Select
recording
off the TV.
on or
TV AV: Selects the TV's
(m/M)
or
for
30)
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
Tape Eject.
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
tray.
?
-
-
MARKER SEARCH
menu.
CLEAR
Clear
a
track number
on
the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
REPEAT
Repeat chapter, track, title, all.
-
?
Note:
This remote control
uses
the
same
buttons for VCR and DVD
functions
When
When
8
(ex. PLAY).
using a VCR, first
using a DVD, first
press the VCR button.
press the DVD button.
Rear Panel
VIDEO/AUDIO
Connect to
a
OUT(Left/Right) (DVD/VCR OUT)
TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect the aerial
Connect to
this
Pb
Pr)
OUT)
AERIAL
using
(Y
inputs.
INTRODUC
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
EURO AV2 DECODER
jack.
Connect to
pay-TV
decoder
S-VIDEO OUT
Connect to
EURO AV1 AUDIO/VIDEO
Connect to your TV set
a
(DVD
EXCLUSIVE
TV with S-Video
(VCR
or
another video recorder.
or
IN+OUT / DVD
OUT)
input.
OUT)
another video recorder.
COAXIAL
Connect
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
RF.OUT
Connect to your TV
using
this
jack.
AC Power Cord
Connect to
Do not touch the inner
Electrostatic
pins
discharge may
of the
cause
the
panel.
permanent damage to the
jacks
on
a
power
source.
rear
unit.
9
Connections
Progressive Scan
Tips:
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
Depending
If your television is a high-definition or "digital
evision, you may take advantage of the DVD
on
progressive
possible.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
For better sound
Caution:
Make
sure
this unit is connected
Set the TV to the correct video
directly to the
input channel.
Do not connect this unit's AUDIO OUT
phono
in
jack (record deck)
Connecting
(or Satellite)
Make
the
to the
system.
of the
ding
2.
in
jacks
jacks
on
on
the DVD
the TV
using
to the corresponthe Y Pb Pr cable.
Connect the EURO AV1 AUDIO/VIDEO
Right AUDIO OUT jacks of the
audio left/right in jacks on the TV
Connect the Left and
DVD
Player
to the
using
the audio cables.
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
menu
for
analog
video
S-VIDEO
con-
on
Rear of this unit
(DVD
exclusive out
connection)
the SCART
input
on
the
socket
on
rear
the
lead.
Some TV broadcasters transmit encoded television
(descrambler)
or
to this unit.
Basic connection
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel of
Connect the
RF.OUT
Rear of TV
AERIAL
this unit.
supplied
jack
on
the
VIDEO
INPUT
COMPONENT VIDEO INPUT/
PROGRESSIVE SCAN
RF antenna cable from the
panel
Input.
rear
television's Antenna
Pr
Pb
Y
AUDIO INPUT
L
Component
SCART INPUT
S-
UT
R
of this unit to your
DVD exclusive out connection
1.
Player
(AV)
which you can only see with a purchased
rented decoder. You can connect such a decoder
2.
VIDEO OUT
Progressive to "On" on the setup
progressive signal, see page 19.
signals
1.
Connect the COMPONENT/ PROGRESSIVE SCAN
Set the
following connections, depending
capabilities of your existing equipment.
one
1.
nection.
panel of this unit to
TV using a SCART
2.
of your audio
output for the highest video resolution
scan
Notes:
to a TV & Decoder
Basic connection
1.
jack
TV.
ready" telPlayer's
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
best connections.
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See
"Connecting to optional equipment" on page 11.
connection
Decoder
(or Satellite)
Video connection
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
sponding
in
jacks on the DVD Player
jacks on the TV using the
to the
corre-
Y Pb Pr cable.
2.
Connect the Left and
to the
Right AUDIO OUT jacks of the
audio left/right in jacks on the TV
DVD
Player
using
the audio cables.
S-Video connection
1.
Rear of this unit
Connect the S-VIDEO OUT
S-Video
input jack
on
the
jack on this unit to the
TV using the S-Video
cable.
2.
(Basic connection)
Connect the Left and
Right
audio left/right
DVD
Player
using
the audio cables.
10
to the
AUDIO OUT
in
of the
jacks
jacks on the
TV
Note:
If the TV has
with the S-video cable.
input, connect the DVD player
When using an S-video cable, do
not connect the
video cable.
an
S-video
yellow
Connections
Connecting
(Continued)
Optional Equipment
to
Notes:
If the audio format of the
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
the
Connect the Left and
To
AUDIO OUT
DVD/VCR AUDIO OUT
Right
(DVD
EXCLUSIVE
or
this unit
OUT) jacks
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
on
capabilities of
produce a strong,
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
PREATION
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1.
Connect
one
of this unit's DIGITAL AUDIO OUT
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional digital (coaxial) audio
cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
page
digital output.
18).
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
DTS). Check the receiver manual and the
Digital and
logos on the
front of the receiver.
Warning:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of this unit
2 channel
analog
stereo
or
Pro
Dolby
Logic
II/Pro
Logic
connection.
DVD exclusive out
DVD/VCR OUT
Digital
COAXIAL
DIGITAL INPUT
multi-channel connection
L
(DVD
exclusive out
connecttion)
R
AUDIO INPUT
Amplifier (Receiver)
11
Before
Operation-VCR part
in
Tuning
a
video channel
TV
your
on
7.
output frequency of this DVD+VCR is
channel 36. If channel 36 is
TV
station,
or
if the
picture
already
is
used
set at UHF
by
distorted, you
another
8.
can
from the DVD+VCR like
another TV station. You have to select
number
a
channel
on
your TV should already have a dedicated video
channel built into it, usually called AV.
Make
sure
Press
1/+
Turn
2.
Insert
a
video
pre-recorded
the front of your DVD+VCR when you
Tune this channel
so
appears.
Store this channel
on
that
a
bright
blue
Make
and
sure
that you have
successfully
correctly
tuned in
a
a
installed your DVD+VCR
dedicated video channel
dedicated video channel
tape into your DVD+VCR
To make
tuning
this
3 to 4
shown "ACMS"
If you switch your DVD+VCR on and continue stages 3
4, instead of seeing video playback
stage!
3.
Tune this channel until the video
blue
picture
as
TV
(see p.14).
sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned
4.
for
optimum
Store this channel
video
playback
on
your TV.
your TV.
You will need to look at the TV instruction book if
on
you do not know how to do this.
5.
stages 5
Only carry
out
clear video
playback
Select
8 if you cannot obtain
4.
as described in stages 1
~
~
TV channel which you wish to watch video.
Make sure that your DVD+VCR is in standby
a
pressing 1/+ on the
will be displayed).
6.
Press PROG.
for
more
remote control
(only
the clock
the front of your DVD+VCR
than 4 seconds.
(v/V)
on
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
RF
12
CHANNEL
36
tapes!
stations, please follow stages
screen.
is
your TV
for the very first
~
bright
on
your
Following picture will display on the TV screen
when you have just connected your video recorder
for the very first time.
see a
on
time
and press N on the remote control.
Select a TV channel which you wish to watch video.
Don't worry if you don't have a video-tape to play at
tune your TV until you
screen
your TV.
Using your VCR
your TV.
on
on
you will be unable to view and record video
your DVD+VCR.
on
1/+
TV. If you do not tune in
that you have correctly installed your
DVD+VCR as described earlier in this book.
to turn
TV channel which you wish to watch video.
Notes:
your TV and tune it in so that you may
watch video tapes. If you have used a SCART then
1.
a
have finished.
~
signals
Select
Press
change the transmitter channel of your DVD+VCR.
Stages 5 8 will show you how to change the output
frequency of your DVD+VCR.
Your TV receives
to select another video channel.
(v/V)
You may select any channel number between 22 and
68.
Notes:
The
Use PROG.
ACMS
Pr-12
ACMS
OKi
Before
Operation-VCR part
Setting
the clock
To set the colour
Manually
The clock in your DVD+VCR controls time and
date settings for your DVD+VCR.
automatically during ACMS
(Automatic Channel Memory System) when
The clock is set
DVD+VCR detects
Teletext
your
channel that broadcasts a
a
If the broadcast
signal.
signal is weak
require setting
clock will not be set and will
the
system
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYS and press
ENTER/OK.
4.
Press 3
or
menu
will appear
4 to select
on
the TV
according
screen.
to the COLOUR
system used.
manually.
1.
Press i.
Press b
to select SET.
or B
Press ENTER/OK.
The ACSS mode
can
be set to "OFF"
ENTER/OK if you want to set the time
SYS
by pressing
SYS
fOSD
ON
OFF
i
manually.
5.
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
HHMNDDMMYY
:.
-
--
-
--
--
--
ACSS
12
---
.
ON
:
SET
2.
Use the v
or
OK i
V on
the remote control to alter the
SYS
HOURS, MINUTES, DAY, MONTH and YEAR.
ON
OFF
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The
of the week will appear
you enter the year.
day
automatically
SYS
fOSD
6.
Press i to
remove
i
the
menus
from the TV
screen.
when
HHMNDDMMYY
8
:.
0010105SAT
.
ACSS
12
:
OFF
OK i
SET
3.
If you make a mistake press b
correct details.
4.
Press i to return to
a
TV
or B
and enter the
picture.
13
PREATION
Before
Operation-VCR part
How to
use
This DVD+VCR
the main
Tuning
menu
in TV Stations
easily be programmed by
using the menus displayed on screen.
The menus are controlled by the Remote Control
is weak your VCR may
not detect the necessary information and will not
be able to store them correctly. To overcome this
Handset.
problem please
Switch
can
your TV set and DVD+VCR
POWER button.
1.
on
by pressing
the
Press i button.
2.
The main
menu
will appear
on
the TV
If the TV broadcast
Automatically
tion
on
signal
turn to the MANUAL TUNING
page 15.
1/+
1.
Press
2.
Press i button.
to turn
your DVD+VCR.
on
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
sec-
screen.
Press OK.
12
SET
SYS
fOSD
ON
OFF
12
Pr-12
SET
ACMS
SYS
Pr-12
ACMS
fOSD
REC
ON
OFF
Timer
recording setting (see p. 21).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
SET Date & clock setting (see p. 13).
SYS To set the Colour TV System (see p. 13).
(Dr.) To check a problem with your VCR
(see p. 25).
F.OSD ON/OFF To display the operational
-
OKi
-
-
-
-
ACMS
-
Pr-12
OKi
ACMS
-
Press OK to
4.
mode of your VCR
(see
(16:9/4:3)
-
p.
aspect
ratio of your
TV
DECODER
NIC
-
(see p. 25).
To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 24).
improve the playback picture
(see p. 20).
To activate or deactivate the NICAM digital
sound (see p. 24).
(OPR)
O
-
-
C02
00
BBC1
02
C03
00
BBC2
03
C04
00
ITV
i
To
The TV STATION TABLE will appear when
5.
Press i to
change the menu language on the DVD setup
(See the Menu Language on page 17.)
Press 1 and 2 to select the desired
Press ENTER/OK and
Press i to return to
a
use 3 or
TV
picture.
tuning
is
completed.
save
menu.
01
C02
00
BBC1
02
C03
00
BBC2
03
C04
00
ITV
04
C05
00
CH4
05
C06
00
CH5
08
4 to select.
settings.
your
07
4.
E
ACMS
06
3.
tuning
Pr-12
can
menu.
01
S
Tip:
You
to start the automatic
process.
24).
To select the
again
PSET
R
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
OKi
Notes:
Please note
currently only a limited number of TV
companies transmit the Programme Delivery Control
(PDC) signal which enables your DVD+VCR to successfully identify and store them. If your DVD+VCR has
difficulty in identifying a TV station please turn the page
to find out how to manually tune in and name a TV station. While automatic tuning is taking place the time and
date will set automatically.
If
:appears in the DVD+VCR display it means that
the broadcast signal is weak and the clock was not set.
-
-
-
Please turn to CLOCK SET section of this book
page 13.
14
on
Before
Operation-VCR part
Tuning
in TV Stations
In certain
areas
of the
Manually
country broadcast signals may
be too weak for your DVD+VCR's automatic tuning
process to find or assign TV stations correctly.
1.
in order for your DVD+VCR to store them.
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
MFT
04
C04
00
STATION
:
AV
PSET
R
6.
Press i.
The main
CH
CHANNEL/CABLE
You must tune in these weaker broadcast stations
manually
PR
i
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
screen.
7.
Press OK.
Use 3
or
station
name.
Use 1
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
Press OK.
12
Pr-12
PSET
R
ACMS
SET
SYS
PSET
R
fOSD
ON
OFF
PR
CH
MFT
STATION
01
C03
00
PR-03
Press
C04
00
4 to select the programme number that
you want to tune (for example, PR 04).
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
05
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
PSET
R
PR
CH
MFT
STATION
04
C04
00
PR-04
DELETE
PSET
R
If you wish to
stages 3 8.
OK i
manually
tune other stations
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
04
C04
00
PR-04
--
--
-----
--
--
-----
--
--
-----
--
--
-----
:
:
05
OKi
,
06
08
Press OK.
Press AV to select C
(Standard stations)
or
S
C02
C69,
S01
-
9.
S41.
Enter the channel number of station that you want to
tune,
4 to find the
use 3 or
PR
CH
04
C--
MFT
--
required
PSET
R
will
Press i
Your
MOVE
:
DELETE
:
,
OKi
again.
new
TV station has
now
been tuned into your
DVD+VCR.
station.
STATION
----
CHANNEL/CABLE
Searching
PSET
R
(Cable
stations):
-
repeat
-
07
5.
OK i
or
04
4.
-
i
Press i.
Press 3
04
STATION
i, confirm the station placement.
The station table will appear.
3.
MFT
AV
:
PSET
R
2.
CH
PSET
R
8.
CHANNEL/CABLE
PR
:
AV
i
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
3 or 4.
15
PREATION
Before
Operation-VCR part
the order of TV Stations
Changing
After
Deleting
TV stations into your DVD+VCR you
may wish to change the order in which they are
stored without having to retune them again. The
After
instructions
given
simply
move
how you
stations.
can
1.
TV stations into your DVD+VCR you
may wish to delete a station.
The instructions given on this page will show you
tuning
this page will show you how you
them into your desired order.
on
Press i.
1.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
TV Stations
screen.
tuning
easily
can
delete any unwanted TV
Press i.
The main
will appear on the TV
Use1or2toselectthePRSET.
Press ENTER/OK.
menu
Press ENTER/OK.
PR
CH
MFT
STATION
01
C03
00
PR-03
12
Pr-12
PSET
R
ACMS
CH
MFT
STATION
01
C03
00
PR-03
Pr-12
SYS
PSET
R
PSET
R
CHANNEL/CABLE
ON
OFF
:
AV
P
SET
R
want to
or
4 to select the
move
programme number you
(for example, PR-03).
ACMS
SET
SYS
PSET
R
fOSD
CHANNEL/CABLE
ON
OFF
i
Press i.
Press 3
PSET
R
2.
Press i.
3.
Press 3
or
4 to select the
want to delete.
Press 2.
(for example, PR-01)
00
PR-01
01
C01
00
PR-01
01
C01
00
PR-01
02
C02
00
PR-02
02
C02
00
PR-02
02
C02
00
PR-02
03
C03
00
PR-03
03
C03
00
PR-03
03
C04
00
PR-04
04
C04
00
PR-04
04
C04
00
PR-04
04
06
07
08
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
PSET
R
Press 3
want to
MOVE
:
DELETE
:
or
4 to select the
move
to
--
-----
--
--
-----
--
--
-----
--
--
-----
05
--
07
08
programme number you
--
C03
06
OKi
PSET
R
OKi
,
--
(for example, PR-05).
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
PSET
R
4.
AV
programme number you
C01
--
:
i
01
05
3.
PR
12
SET
fOSD
2.
screen.
MOVE
:
DELETE
:
,
OKi
Press 1.
After
a
short
while, the selected station will be
deleted.
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
05
--
--
C03
06
07
08
If you wish to delete other TV stations
3-4.
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
01
C01
00
PR-02
02
C02
00
PR-04
03
04
OKi
P
SET
R
05
06
07
4.
08
Press ENTER/OK.
The selected programme will be moved to the
programme number.
If you wish to
1-4.
other TV stations
move
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
05
06
07
08
--
C03
5.
Press i to
16
remove
--
00
repeat stages
PR-03
--
-----
--
--
-----
--
--
-----
the
new
-----
--
PSET
R
repeat stages
MOVE
:
DELETE
:
menus
,
OKi
from the TV
screen.
--
C03
Press i to
remove
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
5.
--
the
MOVE
:
DELETE
:
menus
,
OKi
from the TV
screen.
Before
Operation-DVD part
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu
To
item,
display
the
display
Press DVD
2.
Press SETUP.
Setup
on
Menu
Select
and
Original
Disc Subtitle
Off
Disc Menu
Original
menu
selected
option
item,
as
Use v / V to select the second desired
press B to
move
VCR and DVD's
well
as
option
then
to the third level.
5.
Use v / V to select the desired
6.
Press SETUP
setup
Original:
Refers to the
disc
recorded.
was
menu
DVD
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
then press B
to the second level. The screen shows the
setting for the
alternate setting(s).
language for the
information display.
a
Select the
appears.
Use v / V to select the desired
Select
Language
Disc Audio / Subtitle / Menu
the remote control.
current
4.
Disc Audio
Move
Operation
1.
move
English
screen.
To go back to the previous level:
Press b on the remote control.
to
Language
A second press of
menu.
To go to the next level:
Press B on the remote control.
3.
Menu
and exit the Menu:
SETUP will take you back to initial
The
LANGUAGE
pages 17 to 20.
see
Press SETUP to
General
LANGUAGE
original language
track
in which the
Other: To select another
language, press number buttons then ENTER/OK to enter the corresponding 4-digit
number according to the language code list in the
reference chapter (see page 36). If you enter the wrong
language code, press CLEAR.
Off
(for
Disc
Subtitle)
:
Turn off Subtitle.
then press
ENTER/OK to confirm your selection. Some items
require additional steps.
or N
exit the
setting
Setup
menu.
17
PREATION
Before
Operation-DVD part
4. When the confirm
DISPLAY
Cancel is
DISPLAY
TV
16:9
Aspect
Display
Mode
Progressive
Video
menu
highlighted
as
appears on your screen
default. Use the b button to
highlight
Enter.
Pressing
ENTER will set this unit to
Widescreen
Scan
5.
Off
scan
RGB
Output
Progressive
mode.
Caution:
Once the
Move
TV
:
16:9
Select when
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered, an
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
a
Select when
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
standard 4:3 TV is connected.
See that "DISC" is
2)
16:9 wide TV is connected.
a
Display
Display
Mode
DVD
works
setting
when the TV
only
Video
on
the
Scan
progressive
scan:
Connect
component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
Aspect
Display
Mode
Progressive
Scan
On
Off
Output
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
18
on
the DVD
Output options according
type.
to the
YPbPr: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
on
this unit.
RGB: When your TV is connected with the SCART
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Video
Output
Set this unit Video
jacks
TV
window.
it. The video
TV connection
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
1. Select
display
Aspect
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
To turn On
the
output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
mode is set to "4:3".
Progressive
on
Press STOP and hold it for five seconds before
releasing
Mode
displayed
tray.
Player.
(RGB signal) jack.
Before
Operation
DVD
-
part
AUDIO
OTHERS
Each DVD disc has
a
Set this unit's AUDIO
audio
system you
variety of audio output options.
options according to the type of
The PBC and Auto
Play settings
can
use.
Auto
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
On
Move
PBC
Select
Set
DVD
/ DTS / MPEG
Playback
Control
(PBC)
Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an ampli-
PBC.
fier
Off: Video CDs with PBC
equipment
with
a
Dolby Digital,
DTS
or
MPEG): Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
or
Off.
are
played according
are
played
(for Dolby Digital
the
same
to the
way
as
/
Auto
You
DVD
Play
set up the DVD+VCR so a DVD disc automatistarts playing whenever the DVD is inserted.
can
audio.
cally
Off
search for title that has the
not
to On
Audio CDs.
MPEG decoder.
PCM
Select
VCD
On: Video CDs with PBC
other
PREATION
Off
Play
Move
or
changed.
OTHERS
PBC
Dolby Digital
be
If Auto
(for DTS): If you select "Off", the DTS signal is
output through the DIGITAL AUDIO OUT jack.
DVD
then
Play
play
mode is set to
back the title
On, this DVD player will
longest playback
automatically.
On: Auto
Play
function is active.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
Off: Auto
Play
function is not active.
made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.
Note:
Play
function may not work for
Sample Freq. (Frequency)
The Auto
time and
some
DVDs.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each
further processing.
type of signal through without any
Check the documentation for your
amplifier
to
verify
its
capabilities.
DRC
(Dynamic Range Control)
With the DVD
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). This allows you to listen to a
movie at a lower volume without losing clarity of sound.
format, you
can
hear
DVD
a
Set DRC to On for this effect.
19
Before
LOCK
Operation-DVD part
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
GB
2. Follow
disc
control information that
to certain
or
that may not be suitable
of these discs contain
scenes
Many
scenes on
applies
to the
complete
the disc. Movies and
rated from 1 to 8, depending on the area.
DVD video discs may or may not respond to the
control feature allows you to block
below the rating you input, there by
parental
scenes
your children from
al you believe is unsuitable.
preventing
1. Select
"Rating"
on
tures, you
the
Rating,
must input the 4-digit security
code you
created.
yet
so.
ENTER/OK. Enter
verify.
If you make
entered
security code you are
4-digit code and press
a
Input a
it again and
press ENTER/OK to
mistake before pressing
a
ENTER/OK, press CLEAR.
3. Select
a
rating
from 1 to 8
using
the v / V buttons.
Rating one (1) has the most restrictions
ing eight (8) has the least restrictive.
and rat-
If you select unlock, parental control is not
active and the disc plays in full.
:
4. Press ENTER/OK to confirm your rating
then press SETUP to exit the menu.
5. Press OPEN/CLOSE
(/)
to activate
selection,
parental
control.
Note:
If you set a rating for the player, all disc
rating or lower are played. Higher rated
unless
an
alternate
tive must have the
scene
is available
rating or a
alternative is found, playback stops.
password or change the rating level
20
same
Input
scenes
with the
scenes are
on
not
same
played
the disc. The alterna-
lower
one.
If
no
suitable
You must enter the
in order to
play
4-digit
the disc.
menu.
display
the
6-digit number
security code is
a new
Area Code
DVD
code
as
the
Select "Area Code"
page
on
clear it
menu.
"210499"
cleared.
on
were
used to
the list in the
36).
the LOCK
menu
then press
B.
2.
Follow
3.
Select the first character
4.
Press B and select the second character
step
2
as
using
described above.
disc, based
chapter (see
can
Setup
Enter the Area Code whose standards
shown left
(Rating).
using
v / V buttons.
using
v / V buttons.
5.
1-8:
Unlock
2.
Enter
Password and Area Code fea-
If you have not
prompted to do
Press SETUP to
3.
1.
access
then press B.
shown left column
1.
reference
then
menu
press B.
2. To
as
rate the DVD video
the LOCK
menu
forget your Security Code
access
able to view materi-
being
step
and the
parental control setting if the Area code of the disc is
set wrongly. Some discs offer more suitable scenes as
an alternative. Ratings are area dependent.
to
2
the LOCK
on
If you forget your security code you
the following steps:
scenes are
The
change password.
3. Press SETUP to exit the
Select
If you
for children to view.
or
(Rating).
To change the password, select the "Change", press
ENTER/OK and input the new 4-digit code then
press ENTER/OK. Input it again to verify.
DVD
Some movies contain
parental
enter
1. Select "Password"
Move
Rating
can
(Security Code)
Press ENTER/OK to confirm your
selection.
area
code
Operation
Playing
You will
a
with
tape
tape
eject video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC tapes (on PAL TV).
only
be able to load and
better
Getting
a
When
cassette is inserted and
a
Logic search:
During fast forwarding or rewinding press and hold
m or M the picture will be played back at 7 times
normal playback speed.
5.
picture
the
playback started,
automatic
tracking function works to get the best
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
To switch off the slow motion and
Make
that you have correctly connected your
DVD+VCR as described earlier in this book.
Turn
6.
Press N to start
If you load
a
seen
in the
picture,
reduce them
Press STOP to end
playback.
Press EJECT.
on
If the end of the
tape is reached, your DVD+VCR
will stop playback automatically, rewind, stop, eject
the tape.
The video cassette should have the window side
2.
be
can
withvorV.
your DVD+VCR.
Insert the video cassette into your DVD+VCR.
up and the
shuttle, the noise bars may
the picture according to the status of tape.
appear on
If distortions
on
facing
slow motion and
During
sure
your TV.
Press POWER to turn
shuttle, press the
desired function.
any distortions have been removed.
1.
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay).
Slow motion
arrow
facing
away from you.
playing
your tape.
video cassette which has had its record
protection tab removed, playback
will start automatically.
of the cassette
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
AUTO TRACKING
Your DVD+VCR will
automatically adjust the
tracking to give the best picture quality.
If noise bars appear during playback, adjust the
tracking manually by pressing PR/TRK (+/-).
1 Press 30 seconds
2 Press 60 seconds
3 Press 90 seconds
3.
Press PAUSE/STEP to still
picture.
repeatedly to advance
Press PAUSE/STEP
frame
by
a
the
tape
frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum
This feature
Still
the
can
paused
picture quality
can
be
improved slightly by using
vorV.
playing
your tape.
Double
speed playback
Press the "N (X2)" button during normal
playback. The tape will play back at double speed
normal
(X2)"
Response)
play
note that the OPR icon
that mode when
1.
Press i.
2.
Press b
3.
Press ENTER/OK.
4.
Press
and without sound.
Press the "N
tape. Please
appear in
Press N to continue
Picture
automatically improves playback picture
quality by adjusting your DVD+VCR to the condition
.
4.
120 seconds
for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to
prevent damaging the tape or your DVD+VCR
Tapes
be
4 Press
3
or
B to select
or 4
playing
a
(
)
will
of
only
tape.
(OPR).
repeatedly
to select:
OFF, SOFT
or
SHARP.
button to return to
playback
at
Please note you may
speed
a
5.
Picture search:
only
set OPR when
playing
tape.
Press i return to
screen.
back press either BACKWARD or
FORWARD to this will enable you to rapidly wind
During playing
the
are
tape (7 times normal playback)
on the tape.
see
where you
Pr-12
PSET
R
ACMS
OFF
SOFT
SHARP
fOSD
ON
OFF
21
PREATION
with
Operation
Instant Timer
tape
7.
Recording (ITR)
Your DVD+VCR allows you to make
using a variety of simple methods:
Press PAUSE/STEP to continue
recordings
Your DVD+VCR
out.
incorporates Long Play (LP)
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be
sound
1.
quality
Make
when
using
slight
loss in
picture
and
LP.
Insert
3.
Press
3 or 4
arrow
protection
tab into your
facing
away from you.
to select the programme number you
wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4.
If you wish to record directly from the SCART or
RCA jacks, repeatedly press AV until the socket you
wish to record from is
AV 1 for
displayed.
from EURO AV1 SCART
jacks
on
of your unit.
AV 2 for recording from EURO AV2 SCART
jacks
on
the
the
recording
rear
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
rear
(Left
5.
&
Right) jacks
on
the front of your unit.
Press LP if you wish to record in
Standard Play.
Long Play
SP will
and sound
produce improved picture
however LP will provide twice as
time
6.
as
much
or
quality,
recording
SP.
Press REC/ITR
Press REC/ITR
on
on
the remote to start
recording.
the remote several times.
Each successive press will increase the record time
by 30 minutes until you reach a maximum of 9
hours.
22
Notes:
If you do not wish to record
on a
tape (this
quite easily by accident!) remove the
the back edge of the video cassette.
happen
protection tab on
can
with the
the hole
tape.
programme while
watching
starting your instant recording,
press TV/VCR to select TV mode and then selecting a
different channel on your TV.
you can
another by
The video cassette should have the window side
up and the
recording.
Press EJECT.
Remember
DVD+VCR.
facing
Press STOP to end
with self adhesive
your DVD+VCR.
video cassette with
a
recording.
possible to record on a video cassette
record protection tab removed by covering
that you have correctly connected your
DVD+VCR as described earlier in this book.
on
8.
It is
sure
Press POWER to turn
2.
a
unwanted
Tapes can be paused for up to 5 minutes; RECP will
be displayed when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
Recording (ITR) start recording
immediately for a set period of time or until the
runs
recording
scenes.
Instant Timer
video cassette
Press PAUSE/STEP to avoid
record
one
with
Operation
Timer
tape
recording using On Screen
PR
DATE
TIME
--
PR-033--
Display
You may set up to seven timer record events
within one month of the current date.
the timer make
set the DVD+VCR clock
sure
correctly
--
--
--
--
--
--
--
--
--
--
--
--
--
--
a
video cassette with
protection
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
on
recording
start and
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
your
DATE
tab into your
DVD+VCR.
TIME
41 4 ::
00 1 5 30
PR-03
Insert
--
Use v/V/1/2 buttons to enter the
PR
1.
::
SP
--
end times of the programme that you wish to record.
that you have
and you know
which stations you have tuned TV stations
DVD+VCR.
--
-~
OK i
6.
setting
--
--
DLYSUMOTUWETHFRSA
Note:
Before
--
::
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
The video cassette should have the window side
i
facing
2.
up and the
away from you.
facing
arrow
Press i.
7.
Press1or2toselectREC(
orVtoswitchPDConoroff.
PressBandpressv
).
Press ENTER/OK.
PR
DATE
41 4 ::
00 1 5 30
PR-03
PR
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
Press ENTER/OK to start
(v/V)
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
--
setting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
i
OK i
,
::
-~
SP
--
the timer record
Press B to select the
Press v
or
or
recording speed.
V to select the desired
tape speed (SP,
LP).
IP mode determines how much
tape is left and
switches
speed from SP to LP, if necessary,
plete recording the program. IP mode is not
to
com-
selected
when PDC is ON.
TIME
--
--
SP
PDC:ON
SP
--
to enter the station that you
DATE
::
SP
--
wish to record then press 2.
PR-03
--
SP
--
IP,
PR
--
SP
--
event.
Use the PR/TRK
--
SP
--
8.
4.
--
SP
--
DELETE:
3.
~
TIME
--
--
TIME
SP
--
SP
--
SP
--
PR
SP
--
PR-03
SP
--
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
SP
--
SP
--
i
Note:
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
If all timer record events
full press v or V to select
the event that you wish to remove and replace.
Press b to delete the event.
5.
Use the PR/TRK
are
(v/V)
to enter the date of the
programme.
If you press ENTER/OK before
you may select one of the
recording features.
Press 1
or
2 to
entering the date
following automated
select, then press ENTER/OK
to
confirm.
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
same
Saturday
and
time every week.
23
OPERATION
Operation
with
tape
recording using On Screen
Timer
Display (Continued)
8.
Press i to set another timer record event and follow
steps
Check that the timer event details
Press i return to
are
you have entered
and will need to re-enter the data.
displayed,
Press POWER to switch your DVD+VCR to Timer
Standby mode.
The timer
will appear in the display
window while your DVD+VCR waits to make the
symbol (
)
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
Timer
Recording
During
automatically
power off when
ends.
timer
recording standby mode, the DVD
cannot be operated. To use the
VCR mode
and
DVD+VCR, press POWER. After you use the DVD or
VCR, press POWER again to put the VCR into timer
recording standby
If at
mode.
later date you wish to delete or change any of
the settings in timer event memory you may do so
a
without
having to enter all the timer event information
again. Simply display the timer event screen. Use v
or
V to select the event that you wish to delete
or
change.
Press b to delete the event...or
Press ENTER/OK to
select; Station, Date,
recording speed.
then press b or B to
Start and End times and
change;
Press v
or
V to enter the correct
information.
If Timer record events
Make
sure
Overlap...
that the
events do not
preset times of the timer recording
overlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
will be recorded.)
To watch
a
DVD while
performing
press DVD to select DVD mode.
24
a
timer
run over
is transmitted
by
into extra time. The PDC
the broadcaster and this
con-
trols your video recorder's timer. Currently only a limited number of TV companies transmit PDC signals.
correct.
screen.
If PLEASE CHECK is
9.
events which may
signal
3 to 8.
incorrectly
Programme Delivery Control (PDC)
The Programme Delivery Control (PDC) system
adjusts the start and end times of a timer record
event. This can be particularly useful with sports
recording,
2
Please make
sure
that when
recording
from channels
that do not broadcast PDC that you turn PDC OFF.
Additional
Operation
-
VCR part
Hi-Fi Stereo Sound
System (NIC)
Your DVD+VCR will record and
playback
sound. In addition it has
a
digital stereo
record and playback
your DVD+VCR will have a normal mono
audio track and two VHS Hi-Fi stereo audio tracks.
These stereo tracks allow you to make audio recordings
in Hi-Fi stereo or bilingual mode from a TV broadcast,
system, video disc
Your DVD+VCR's NICAM
1.
another Hi-Fi VCR.
or
digital
sound decoder
sound. The
particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
recorded
tracks of the video
It cannot
all
displays
from
screen.
display
OPERATION
when f.OSD is OFF.
Digital Tape Counter can be displayed on the
display window instead of the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
the
tape.
1.
Press CLK/CNT.
the Hi-Fi stereo
on
Press N
tape.
stereo tracks. The
primary language
on
the
start
playback or recording.
will display the actual play
tape counter
hours, minutes and seconds.
on
on
time in
the Hi-Fi
channel
(left)
track of the video
mono
or
The
Both audio channels will be recorded
2.
Press STOP when
playback
or
recording
is
complete.
tape.
Press BACKWARD.
MONO
The sound is recorded
mono
remove
Tape Counter Memory Stop
BIL NICAM
will be recorded
screen.
Press CLEAR to set the counter to 0:00:00.
automatically
mono
to
the
Note:
STEREO NICAM
and
again
on
and
The
allows you to enjoy broadcasts with NICAM sound,
as well as standard stereo, bilingual and mono
Sound is
tape left
Press CLK/CNT
the TV
majority of the On Screen
leaving only the tape counter
will clear
the amount of
stereo NICAM
on
stereo audio
After 3 seconds the
Displays
Hi-Fi stereo
sound decoder. This allows you to
the sound in several different ways. Video cassettes
recorded
2.
on
track of the video
The
the Hi-Fi tracks and the
tape
without any
tape will rewind and automatically stop when
the counter returns to 0:00:00.
separation.
Note:
Press AUDIO
2.
repeatedly
until the desired audio
mode appears.
The choice is
3.
To rewind to the
BACKWARD
primary language is
output on the left channel and the secondary channel is output simultaneously from the right channel
when audio output is set to STEREO. The primary
language will be output from both channels when
the audio setting is MONO.
Please note that when adjusting the tracking control
To set the decoder
Hi-Fi stereo sound may revert to MONO.
1.
playback
the
already described, how to connect a decoder
for pay-TV station as CANAL+ or PREMIERE on page
10. For the recording of an encoded station you do not
have to control anything. You just select the
station and wait shortly until the decoding will start.
Press i.
The main
When OFF is selected in
NIC, only
mono
Press F
sound will be
2.
Press D
ON:
On Screen
Display (F.OSD)
is
the TV
taking place
will not be recorded onto the
1.
or
E to select.
When the decoder is connected to the AV2
OFF: When another VCR is connected to the AV2
display the current time or tape counter,
left, day, month, year, day of week,
channel, tape speed and operational mode
on
or
socket.
You may easily
amount of tape
programme
of your DVD+VCR
will appear on the TV screen.
G to select the DECODER.
menu
Press ENTER/OK.
output.
recording
tape, press
We have
Note:
a
of the
STEREO, LEFT, RIGHT and MONO.
In BIL NICAM
If
beginning
again.
socket.
3
Press i to return to
a
TV Picture.
screen.
these On Screen
Displays
tape.
Press CLK/CNT to
Press CLK/CNT
display options.
display.
repeatedly
The
tape
to
cycle through
the
counter and amount of
tape left will appear if there is
a
tape loaded.
25
Additional
Operation
Video Doctor
VCR part
-
(Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
Compatibility
Your DVD+VCR
record and
can
play
format programme
Press i.
screen
Press1or2toselect
.
Press ENTER/OK.
1.
signal
Switch
on
successfully
the correct
must be broadcast
by
16:9
back wide
aspect ratio programmes (16:9). To record
screen.
1.
Wide Screen
a
screen
wide
screen
type of wide
the TV station.
your DVD+VCR.
Press i.
ANTENNA CONNECT
PressForGtoselect
HEAD STATUS
.
TAPE STATUS
Press ENTER/OK.
NO. OF TIMER PROGRAMME
12
NEXT TIMER PROGRAMME
Pr-12
PSET
R
ACMS
SET
SYS
PLEASE CHECK
fOSD
ON
OFF
i
2.
Press
3 or 4
to check
a
problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
12
Pr-12
PSET
R
SET
ACMS
SYS
fOSD
ON
OFF
jack securely.
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
12
Pr-12
P
SET
R
3.
Press i to
the
remove
menus
4:3
16:9
fOSD
ON
OFF
2.
Press v/V
recording.
screen.
(Child Lock)
The control buttons
switched off
using
1.
on
that your unit
the remote control.
16:9.
back Wide-Screen
programmes
as
Wide-Screen and Normal
programmes
4:3
as
normal.
Only
and
recording
can
only
be
can
be
for
format
playing back and recording
recordings (16:9).
Normal format
Wide-Screen
operated
Press LOCK.
12
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons on the front of your unit are
SAFE will flicker in the display window for
a
few
PSET
R
fOSD
ON
OFF
3.
Press i to
To
Press LOCK
to switch off the child lock.
OFF will
in the
again
disappear
display
window.
Note
Lock is not available
26
Pr-12
on
the DVD mode.
A
AUTO
S
4:3
16:9
i
pressed
seconds.
2.
or
16:9:
the front of the unit
so
AUTO, 4:3
AUTO:
Automatically plays
from the TV
to select:
repeatedly
Only for playing back
recordings (4:3).
Lock
i
place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00SP
Shows the current status of timer
AUTO S
A
enjoy
remove
the
menus
from the TV
screen.
Wide-Screen
connect your VCR to
playback you must
the TV using a SCART
cable.
Additional
from External
Recording
You
Operation
record from
can
camcorder
VCR, connected
or
DVD+VCR's external
1.
Make
that the
sure
Press AV
Components
component, such
as a
component you
properly
want to record
You
the
to
input
4.
5.
Load
recording
from EURO AV1 SCART
Set
Right) jacks
a
recordable
on
Find the
start
jacks
on
tape
or
jacks
on
Press REC/ITR
or
LP)
as
necessary
disc in the external
once
The REC indicator
Press STOP to
4.
by
component.
your DVD+VCR, you
If
5.
?
in
Before
?
If your source is copy-protected using CopyGuard, you will
not be able to record it using this unit. See Copyright on
a
manually
confirm the
recording
start
position.
playing,
from
to
begin
press STOP to
copying.
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs
displayed in the display window.
recording.
the display window.
?
To record for
point
Notes:
?
more
at the
the Remote Control.
When the DVD is finished
end
stop recording.
recording,
on
you may need to press N
Notes:
?
want to
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
to start
lights
results, pause playback
Press REC/ITR
(or Discs).
"LOCK" is
You must
stop the copy process manually when the DVD
movie ends, or the unit may replay and record over and
over
page 2 for
tape into the VCR deck.
place on the DVD from which you
dubbing using the N, BACKWARD,
For best
?
7.
blank VHS video
which you want to record.
tape.
you have a TV attached to
can see the video playing.
6.
a
copying.
recording mode (SP
pressing LP repeatedly.
Play
tape.
3.
the front of your unit.
a
the
VHS
Insert
of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
3.
a
2.
rear
(Left
DVD to
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
rear
&
a
FORWARD and PAUSE functions.
of your unit.
AV 2 for recording from EURO AV2 SCART
the
copy the contents of
1.
record from.
AV 1 for
can
to the DVD+VCR.
to select the external
repeatedly
from DVD to VCR
Copying
to any of the
inputs.
from is connected
2.
external
an
VCR part
-
again.
When you
recording
stop the DVD playback during copying, the
on
VCR is
stopped automatically.
details.
fixed
length
of
time,
see
One-touch Timer
Recording.
27
OPERATION
with DVD and Video CD
Operation
General Features
Playback Setup
1.
Turn
on
the TV and select the video
input
Notes:
source
connected to the DVD+VCR.
2.
Turn
the
on
the audio
input
source
system (if applicable)
(
)
to open the disc
load your chosen disc in the
side down.
tray and
tray, with the playback
When
Playback
( ) to close the tray.
automatically. If playback does
starts
5.
some
To
cases, the disc
menu
might
not
appear instead.
stop the playback, press x.
The unit records the
Press OPEN/CLOSE
1/I,
the disc
(
(
tray closes
move
to another title.
a menu screen
The
menu screen
DVD
or
a
title
disc has
Video CD which offer
loading
a
(0-9)
than
more
as
Press >
title/chapter
view, then press ENTER/OK to start.
Press TITLE or DISC MENU to return to the menu
screen.
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
operating procedures
may differ. Follow the instructions on each menu
screen. You also may set PBC to Off (See "PBC"
?
If
to another
can move
to the
quick successions
previous chapter/track.
?
To go
directly
to any
chapter during
to
step back
DVD
playback,
(0-9)oruseb/B.
Note:
On
a
Video CD with
menu
to
use
Slow Motion
1.
Press M
on
2.
3.
not within the
must set PBC to Off
PBC, you
this function
DVD
during
(See
"PBC"
on
on
page
VCD
still mode.
1/7, T 1/6, T
now
go into SLOW mode.
required speed:
1/4, or T 1/2 (forward).
To exit Slow Motion
mode, press N.
rating
Note:
Slow motion
the
18).
Use M to select the
T
DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 2 (two).
28
or a
Press . twice in
18).
parental control is set and the disc is
settings you must input the password.
(See "LOCK" on page 19).
chapter
.
The DVD+VCR will
Notes:
?
track, you
one
one
follows:
or
VCD
page
than
?
setup
and
more
press DISPLAY and press v / V to select the
chapter/track icon. Input the chapter/track number
you want to
settings
by
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
a menu.
Use the b B v V buttons to select the
Menu
to
?
DVD
screen.
can move
b / B then press ENTER/OK to
or
disc has
on a
chapter/track
the disc.
first after
title, you
one
VCD
is
displayed
may be displayed
DVD
to another CHAPTER / TRACK
Moving
off.
If
than
more
number
When
)
) to close disc tray or press
automatically and unit turns
remove
disc has
using
on
to
a
DVD
stopped point, depending
the disc. "Xx" appears on the screen briefly. Press
N to resume playback (from the scene point). If
you press x again or unload the disc ("x" appears
on the screen.), the unit will clear the stopped point.
Press OPEN/CLOSE
use
another title. Press DISPLAY and select desired title
start, press N.
In
to another TITLE
Moving
Press OPEN/CLOSE
4.
otherwise, all operations described
the remote control. Some features may also be available on the Setup menu.
and select
connected to the DVD+VCR.
Press OPEN/CLOSE
3.
Unless stated
playback
in
reverse
is not
possible.
with DVD and Video CD
Operation
Still Picture and
DVD
Frame-by-Frame Playback
Repeat
VCD
You
DVD
repeat
can
Press REPEAT
Press X
during playback. Advance the picture
frame-by-frame by pressing X repeatedly.
1.
To exit still motion
2.
DVD
Search
Press m
1.
Press m
2.
speed
M
M
or
to select the
X16
To exit SEARCH
press N.
on
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
2.
"
"
-:--:--
desired
?
Title:
?
Off
repeats the
does not
:
?
Track
?
All
?
Off
-
-
play repeatedly.
Repeat
Track/All/Off
the current track
repeats
repeats all the tracks
:
:
does not
:
OPERATION
current title.
on a
disc.
play repeatedly.
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use this function (See "PBC" on page 18).
?
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
(Track)
the disc:
Press DISPLAY
box shows the
a
?
VCD
at any chosen time
playing
disc.
Notes:
mode,
DVD
Time Search
1.
required
X100
or
a
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
:
disc; X2, X4,
Video CD; X2, X4, X8
To start
?
during playback.
DVD
3.
DVD Video Discs
mode, press N.
repeatedly
title/chapter/all/track on
during playback to select
a
repeat mode.
VCD
or
VCD
appears.
Repeat
DVD
A-B
VCD
To
repeat
1.
Press A-B at your chosen starting point.
"A
appears briefly on the TV screen.
a
sequence.
"
3.
Input
the
required
start time in
seconds from left to
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers you
entered. Then input the correct numbers.
right.
Press ENTER/OK to confirm.
4.
Playback
starts from
the selected time.
Video CD with
a
setup
2.
to
menu
use
must set PBC to Off
PBC, you
this function
DVD
Marker Search
3.
(See
"PBC"
on
on
To enter
Marker
a
start
can
points.
page
Use
18).
#5
To enter
VCD
1/9
from up to nine memorized
marker, press MARKER at the
point
the TV
screen
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
1.
During
disc
search
menu
Within 10
Clear
a
Marked Scene
on
Press ENTER/OK and
marked
scene.
to cancel.
VCD
enlarge
Press ZOOM
the video
image.
during playback
or
b / B to select
or
playback
a
Each press of the ZOOM button
screen in the sequence:
3.
→
400% size
150% size
still
playback
→
To
changes
200% size
→
to
→
the TV
300% size
100% size.
Use the bBvVbuttons to
or
123------
press SEARCH. The marker
appears on the screen.
number that you want to recall
to
zoomed
playback,
seconds, press
zoom
→
4.
or
DVD
100% size
markers.
To Recall
again
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
playback
desired
3.
Press A-B
the
the
2.
2.
again at your chosen end point.
"A B" appears briefly on the TV screen and
repeat sequence begins.
-
1.
You
Press A-B
Zoom
Note:
On
-
move
through
the
picture.
resume
normal
playback,
press ZOOM
repeatedly
CLEAR button.
Note:
Zoom may not work
on some
DVDs.
marker
clear.
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
any marker
the marker search menu.
can
play
by inputting
its number
on
29
with DVD and Video CD
Operation
Changing
Press AUDIO
different
repeatedly during playback to
audio channel (Stereo, Left, Right).
Last Scene
This
player
Memory
remove
CD
hear
a
scene
VCD
remains in memory even if
the disc from the player or switch off the
scene
If you load a disc that has the
the scene is automatically recalled.
scene
memorized,
Note:
does not memorize the
switch off the
player
before
commencing
of
appears
menu
may appear.
The
menu
Screen Saver
3.
discs, the playback picture may be flick-
Dot Crawl is shown
interpolation
on
or
straight
lines. That
De-interlace is not
Angle
Tip:
video mode.
The Camera
To
alternate
displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is improved.
new
video mode number selected is
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
Detailed
MODE1
video
MODE2
:
Description
The
source
material)
:
:
material of the DVD video
(film
material
is determined from disc information.
Suitable for
based material
MODE3
of each Video Mode
playing film based content or video
recorded by the progressive scan method.
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
30
setting only
works when the
Scan mode is set to "On"
on
the
setup
displayed.
to exit.
scenes
recorded at different
Angle icon is displayed
angles are available.
Changing
the Audio
on
the TV
Language
Press AUDIO
camera
different
different subtitle
to hear
repeatedly during playback
languages.
Note:
no
when
a
DVD
Press SUBTITLE
If there is
screen
DVD
repeatedly during playback
audio language or audio track.
Subtitles
If you turn off the power, the video mode will return to
initial default state (MODE1).
is
angles, you can change to a different camera angle
during playback. Press ANGLE repeatedly during
playback to select a desired angle. Note that the
number of the current angle appears on the display.
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
the video
again
menu
DVD
If the disc contains
mode, press and hold
change
DISPLAY about 3 seconds during disc playback. The
or
DVD
Disc Menu
Press DISC MENU
Setting
Vertical
means
as camera
Press TITLE to exit.
Camera
or
a
angles,
options, and chapters
and subtitle
Press DISC MENU and the disc
appears when you leave the
DVD+VCR in Stop mode for about five minutes.
ering
screen.
menu, the
Otherwise, the disc
offers features such
screen saver
With certain
the b B v V
for the title.
during playback and the disc will reverse
picture search through 10 seconds of playback.
And then the playback will start from the point again.
Video Mode
on
the
menu
spoken language
Press AV
The
Press TITLE. If the current title has
a
DVD
Replay
use
DVD
Title Menu
2.
Instant
corresponding number or
to highlight your selection.
Then press ENTER/OK.
disc if you
to play the disc.
scene
the
buttons
1.
player
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access special
features. To use the disc menu, press DISC MENU.
from the last disc that
player.
This
Checking
Input
memorizes last
is viewed. The last
you
DVD
DVD Features
Special
VCD
the Audio Channel
information,
is
displayed.
to
see
the
Controlling
You
can
other TVs with the remote control
control the sound
level, input
power switch of your LG TV with the
remote control.
You
can
control the sound
source, and
supplied
level, input
source, and
power switch of non-LG TVs as well.
If your TV is listed in the table below, set the
appropriate
1.
While
OPERATION
manufacturer code.
holding
down TV POWER
button, press the
number buttons to select the manufacturer code for
your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
If
more
them
than
one
at
one
a
code number is
listed, try entering
time until you find the
one
that works with
your TV.
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
Note:
?
Depending
on
function
the
on
your
TV,
TV,
all buttons may not
after entering the correct
some or
even
manufacturer code.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting. Set
the
appropriate
code number
again.
31
Additional
On-Screen
You
Operation
Display
-
Maintenance and Service
DVD
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
can
display
the
1.
Press DISPLAY
2.
Press v / V to select
The selected item is
item.
When
highlighted.
Press b / B to
change the setting. You can also use
the number buttons if appropriate (e.g. inputting the
title number). For some functions, press ENTER/OK
to execute the setting.
3.
Some discs may not
below.
provide
Please
all of the features shown
If
button is
pressed
play disappears.
no
If
?
is
displayed,
for 10
seconds, the
on-screen
prohibited
or
?
not available.
Selection Method
Title Number
Chapter
Number
Time search
1/1
b /
B, Numbers
ENTER/OK
1/18
b /
B, Numbers
ENTER/OK
-:--:--
service technician.
the unit
the
the exterior surfaces clean
Do not
use
volatile
Numbers, ENTER/OK
Example: On-Screen Display during
playing VCD
Selection Method
Track Number
(or
PBC
1/1
mode)
Time search
32
b /
B, Numbers
ENTER/OK
Numbers
-:--:--
ENTER/OK
such
as
insecticide spray
the unit.
Do not leave rubber
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
Do not
use
thinner,
as
strong solvents such
these
Maintaining
might damage
as
alcohol, benzine,
a
high-tech, precision
device. If the
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
or
the surface of the unit.
the Unit
The DVD+VCR is
Items
liquids
dis-
Example: On-Screen Display during
playing DVD Video
Items
before
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
action
chapter
the Unit
save
near
?
a
shipping
Keeping
Notes:
?
contacting
Handling
during playback.
an
Refer to the information in this
use.
contact your nearest authorized
Playing
The DVD+VCR
ings
Audio CD
an
can
play
CD-ROM, CD-R,
on
or
MP3/WMA Disc
MP3/WMA formatted recordCD-RW discs.
or
MP3 / WMA disc
limited
with this
player
is
follows:
as
Track4
48 kHz (MP3), within
Sampling frequency:
32
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
Track5
creates
?
within 8
-
-
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press N
or
compatibility
ENTER/OK and
playback
?
-
?
starts.
?
AUDIO CD
?
1/12
0:52:07
List
Program
Track1
Track2
Track3
Track6
-
?
File
an
names
ISO 9660 file
system.
should have
a
maximum of 8 letters and
Track7
Clear All
Track8
?
PROGRAM Edit
must
incorporate
They
should not
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*:"<>letc.
?
Press v / V to select
to
2.
see
on
the disc should be
less than 1500 files and 300 folders.
MP3/WMA
1.
The total number of contens
folder, and press ENTER/OK
a
the folder contents.
discs and
recordings
to
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions (see above) to
ensure compatible playback.
MUSIC
1/12
List
player requires
meet certain technical standards in order to achieve
Pressv/VtoselectatrackthenpressNor
ENTER/OK. Playback starts.
0:00:00
This DVD
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
DISPLAY
Clear All
Info
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
6-Music6
7-Music7
permission
always
PROGRAM Edit
be
sought
from the
copyright
owner.
ID3 TAG
?
When
track
playing
titles, you
DISPLAY.
?
a
If there is
file
containing
information such
as
the information
by pressing
[ Song, Artist, Album, Comment, Genre ]
can see
information, "No ID3 TAG" appear
no
on
the
menu screen.
Tips:
?
If you
are
in
file list
a
return to the Folder
on
list,
the "MUSIC"
use
menu
the v / V to
and want to
highlight
and
press ENTER/OK.
?
To go
?
On
directly
to any
track, input the track number (0-9).
CD with MP3 and JPEG you can switch MP3 and
JPEG. Press TITLE and "MUSIC" or "PHOTO" word on
a
of the
menu
is
top
highlighted.
33
OPERATION
Playing
an
Audio CD
or
MP3/WMA Disc
Audio CD and MP3/WMA Disc
Random
Features
1.
Press X
1.
MP3
CD
Pause
Moving
2.
playback,
press N
or
the next track
.
or
to
or
press X
during playback. Random Playback
begins immediately and "Random" appears on the
To return to normal
repeatedly
again.
ßmenu
until
playback, press RANDOM
"Random" disappears from the
screen.
Tip:
MP3
CD
to another Track
Press >
1.
Press RANDOM
menu screen.
during playback.
To return to
2.
MP3
CD
By pressing
briefly during playback
return to the beginning
to go to
>
during
another track and
random
resumes
playback, the
random playback.
unit selects
of the
current track.
Press . twice in
2.
the
previous
You
3.
play
can
quick
track.
any track
Repeat
You
play
1.
by inputting
its number.
2.
MP3
CD
a
track/all
on a
?
a
a
disc. The
repeat icon
desired
repeat mode.
Track:
repeats the current track.
All: repeats all the tracks on a disc.
Off
(No display):
does not
play repeatedly.
Note:
If you press >
once
during Repeat
Track
playback,
the
repeat playback will be cancelled.
Search
MP3
CD
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
speed: X2,
3.
34
to select the
X4 and X8 backward
To exit SEARCH
a
icon and "A
Press REPEAT A-B
-"
appear
again
on
the
menu screen.
at your chosen end
point.
icon and "A-B" appear on the menu
screen, and the sequence begins to play repeatedly.
disc.
playing
Press REPEAT to select
?
sequence during disc playback press
REPEAT A-B at your chosen starting point. The
repeat
The
Press REPEAT when
?
To
Repeat
appears.
2.
Repeat
1.
Track / All / Off
can
successions to go back to
CD
A-B
or
mode, press N.
required
forward.
3.
Repeat
To exit the sequence and return to normal play,
press REPEAT A-B again. The Repeat icon
disappears
from the
menu screen.
Playing
Audio CD
an
MP3/WMA Disc
or
Programmed Playback
1.
Insert
a
Press REPEAT when
2.
Press REPEAT to select
?
disc.
?
?
2.
Off
(No display):
Press PROGRAM.
If you press >
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Erasing
AUDIO CD
6/16
1.
E
Program
01-TRACK01
01-TRACK01
02-TRACK02
02-TRACK02
03-TRACK03
03-TRACK04
04-TRACK04
04-TRACK06
repeat icon
a
desired
repeat mode.
once
does not
OPERATION
play repeatedly.
during Repeat
Track
playback,
the
repeat playback will be cancelled.
E
List
disc. The
repeats the current track
All: repeats all the tracks on programmed list.
Note:
0:52:07
a
Track:
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
The
playing
appears.
The program function enables you to store your
favourite tracks from any disc in the player memory.
A program can contain 30 tracks.
1.
Tracks
Repeat Programmed
a
During
Track from
STOP
mode,
"Program"
List
press PROGRAM and
E
mark
will appear.
2.
UseB/v/Vtoselectthetrackthatyouwishto
erase from the Program list.
3.
Press CLEAR.
05-TRACK05
06-TRACK06
07-TRACK07
Clear All
08-TRACK08
Repeat
PROGRAM Edit
Audio CD
Menu
Program
Erasing
MUSIC
1.
0:00:00
4/4
List
03 File 03
03 File 03
04 File 04
06 File 06
05 File 05
08 File 08
06 File 06
10 File 10
the
During
erase
additional tracks
Complete Program
STOP
mode,
on
the list.
List
press PROGRAM and
E
mark
will appear.
E
Program
to
2.
Use B / v / V to select "Clear All" in the
"Program"
list, then press ENTER/OK.
07 File 07
08 File 08
09 File 09
Clear All
10 File 10
Note:
The programs
MP3
DISPLAY
PROGRAM Edit
Info
are
also cleared when the disc is removed.
Note:
Press PROGRAM
the
3.
Program
Select
a
again,
E
the
mark will
disappear
Edit mode.
track
on
the
"List", then press ENTER/OK
place the selected track on the "Program"
Repeat to place additional tracks on the list.
to
4.
Press N
or
playing
Playback begins
programmed the tracks.
"Program"
list have
To
normal
resume
playback,
in the
ENTER/OK to start.
the order in which you
Playback stops after all of the tracks
6.
list.
Press B.
Select the track you want to start
"Program" list.
5.
to exit
select
a
played
list and then press N
or
the
once.
playback
track of
on
in
from
programmed
AUDIO CD (or MUSIC)
ENTER/OK.
Note:
the
play
disappear
then the program edit mode will disable.
programmed track,
the
E
When you
mark will
35
Viewing
Using
JPEG Disc
a
this DVD+VCR you
can
view discs with JPEG
files.
1.
1.
Insert
disc and close the
a
appears
on
the TV
tray. The PHOTO
menu
screen.
JPEG
Still Picture
Press X
during slide show.
player will now go into
The
2.
To return to the slide
PAUSE mode.
show, press N
press X
or
again.
PHOTO
to another File
Moving
Preview
List
JPEG
Folder 00
Press .
Folder 01
>>>
Folder 02
viewing
Folder 03
>
or
(b
or
B)
while
once
to advance to the next
picture
a
or cursor
previous
or
file.
Folder 04
01 FILE 01
JPEG
Zoom
02 FILE 02
03 FILE 03
Use
zoom
to
enlarge
/FILE 01
To rotate
2.
Press v / V to select
a
folder, and press
ENTER/OK. A list of files in the folder appears. If
you are in a file list and want to return to the previFolder
ous
to
3.
list,
use
the v / V buttons
on
Slide Show
picture
to rotate the
counter clockwise.
the remote
x to
move
to the
JPEG disc
limited
JPEG
?
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER/OK.
compatibility
>>>
are
three Slide
(Fast),
>>
Speed options
(Normal) and > (Slow)
player
is
follows:
upon the size and number of JPEG
files, it could take a long time for the DVD+VCR to
read the disc's contents. If you don't see an on-
Depending
after several
display
minutes,
of the
some
files may be too large
reduce the resolution of
the JPEG files to less than 5760 (Horizontal) x
:
disc with MP3 and JPEG you can switch MP3/WMA
and JPEG. Press TITLE and MUSIC or PHOTO word on
a
top of the
menu
is
4608
?
(Vertical) pixels
and burn another disc.
The total number of contens
on
the disc should be
less than 1500 files and 300 folders.
highlighted.
?
Some discs may be incompatible due to
recording format or the condition of disc.
?
Ensure that all the selected files have the
Press RETURN information of is hidden
extensions when
?
?
copying
into the CD
a
different
".jpg"
layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
".jpg"
extension will not be able
to be read
by
this DVD+VCR. Even
shown
as
JPEG
are
Explorer.
36
with this
---
There
On
as
screen
Tips:
?
or
a
If you want to view a particular file, press v / V to
highlight a file and press ENTER/OK or N.
The selected file will appear for viewing.
viewing a file, you can press
previous menu (PHOTO menu).
?
during showing
clockwise
28)
page
and press ENTER/OK.
highlight
While
?
photo image. (see
JPEG
picture
Press v / V
picture
the
image
though
files in Windows
the files
Language
and Area Code List
Language Code
Use this list to
input
List
your desired
Language
Code
Abkhazian
language
for the
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Disc
Audio, Disc Subtitle, Disc Menu.
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Code List
Choose
a area
Area
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Afghanistan
Argentina
Republic
AF
Area
SG
SK
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
37
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
work
properly.
a
before
problem
service.
contacting
Cause
Symptom
DVD
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert
a
cord into the wall outlet
disc.
not work.
No
The TV is not set to receive DVD
picture.
signal
Select the
on
output.
the TV
player
No sound.
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard (analog) television.
Set
The
Select the correct
equipment
connected with the
are
not connected
not start
player does
playback.
audio receiver
Turn
The
Set the
dirty.
An
unplayable
The disc is
mode of the
so
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
The disc is
input
you can listen to the
sound from the DVD player.
securely.
is set to the
jacks
Scan to "Off"
Progressive
(see page 19).
securely.
The TV channels
The DVD
screen.
securely.
Digital Audio Output
wrong position.
poor.
the TV
securely.
The audio cables
is
on
Connect the video cable into the
signal output.
picture
appears
The video cable is not connected
audio cable is not set to receive DVD
The
appropriate video input mode
so the picture from the DVD
the
on
equipment
jacks
connected with
the audio cable.
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
are
not tuned in
properly.
disc is inserted.
placed upside
Check
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
down.
the disc
a
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The remote control
There is
does not work
remote control and this unit.
properly.
an
obstacle in the
path
of the
The batteries in the remote control
are
the disc
tray correctly
guide.
The disc is
Rating
on
Rating
function
or
change
level.
rating
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
No NICAM sound
recording
38
NICAM mode is not set
properly.
Make
on
sure
by repeatedly pressing
the remote control.
NICAM in the
menu
is set to
AUTO for the station to be recorded.
Specification
General
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
AC
200-240V, 50Hz
Timer
24 hours
RF Modulator
UHF
17W
430 X 78.5 X 265
4.2
(w/h/d)
mm
kg
5˚C to 35˚C
(41˚F
to
95˚F)
REF NC
5%to90%
display type
22-68 (Adjustable)
System
Laser
Semiconductor
laser, wavelength 650 nm
Double azimuth 6 heads, helical scanning.
Video Head
system
Signal system
Frequency
PAL
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 100 dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
(ANALOG
OUT connectors
only)
(DVD)
(CD)
More than 95 dB
Inputs (VCR)
Audio
-6.0
-6.0
Video
dBm,
dBm,
1.0 V
than 10 kohms
(SCART)
more than 47 kohms (RCA)
(p-p), 75 ohms, unbalanced (SCART/RCA)
more
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
RGB
0.7
output
4-pin
x
x
1
1
75 ohms
Vp-p,
Audio
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600 Ω, RCA
jack (L, R)x2/SCART (TO TV)
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
RGB
Designs
?
0.7
output
and
specifications
Manufactured under license from
DTS and DTS
Digital
Out
are
are
subject
Dolby
to
Vp-p,
change
Laboratories.
trademarks of
75
Digital
1 kohms
(SCART)
ohms, unbalanced (SCART)
75 ohms
without notice.
"Dolby"
Theater
and the double-D
Systems,
symbol
are
trademarks of
Dolby
Laboratories.
Inc.
39
human touch
Technology with the
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
to the
original purchaser.
guarantee if unauthorized modifications are
made to the apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
D. We
Aerial
This
or worn
alignment
guarantee does
to carry out service under
obliged
respectfully point
exhausted
E.
guarantee
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is
:
helpful
to
complete
at least your name,
address, phone,
model & serial numbers and return it. This will enable LG to
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RV0041P
Download PDF