LG | RH4820 | LG RH4820 Owner’s Manual

RH4820FVL_AA4ULL_ENG
DVD & HDD
RECORDER
OWNER'S MANUAL
MODEL: RH4820
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Safety
Precautions
POWER: This DVD Recorder
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
should be removed and
the
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation
point
within
is intended to alert the
important operating
an
equilateral triangle
to the presence of
user
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
wiring
such
as a
book
case or
equipment
in
confined space
a
similar unit.
suitable
a
plug
DVD Recorder must be
type fitted. Please refer
of
a
A mains
or
with the earth
green and yellow.
If any other plug is
or
fitted,
symbol
use a
plug
with bared
mains socket.
Do not connect either wire to the earth
letter E
to
removed from the mains lead of this
destroyed.
wires is hazardous if inserted in
5 amp
pin,
or
marked with the
coloured green
or
fuse, either in the plug,
at the distribution board.
IMPORTANT: The wires in this mains lead
accordance with the
BLUE:
NEUTRAL,
following
are
coloured in
codes:
BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD Recorder may not
correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N
WARNING: Do not install this
supply
instructions below:
WARNING: A mains
-
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
mains
supplied with a BSI 1363
approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA
approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or
"LG Electronics U.K.Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug
OF ELECTRIC SHOCK
This
on a
WIRING: This DVD Recorder is
CAUTION: TO REDUCE THE RISK
DO NOT REMOVE COVER
operates
110-240V~,50/60Hz.
or
coloured black. The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L
or
coloured red.
NOTES ON COPYRIGHTS:
It is forbidden
This recorder
To
ensure
manual
employs
proper
carefully
use
a
Laser
of this
System.
product, please
read this
owner 's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
This
placed
product
on
the
DIRECTIVE
73/23/EEC.
apparatus.
is manufactured to
the radio interference
2
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
CAUTION:
comply with
requirements of EEC
89/336/EEC, 93/68/EEC and
SERIAL NUMBER: The serial number is found
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
___________________________________
___________________________________
to
Table of Contents
INTRODUCTION
TableofContents......................3-4
Language............................24
?DisplayMenu......................24
?DiscLanguage.....................24
SafetyPrecautions.......................2
.5-9
Audio...............................25
RecordableDiscs.......................5
?DolbyDigital.......................25
PlayableDiscs.........................5
?DTS.............................25
Disc-relatedterms......................5
?MPEG...........................25
TypesofvideoCDs.....................5
?SamplingFrequency................25
AboutDVD-RandDVD-RWdisc.
.6
?Vocal............................25
.6
6
.25
DRC(DynamicRangeControl).
Lock(ParentalControl)...............26-27
6
?SetPassword......................26
Resettherecorder......................6
?Rating...........................26
?CountryCode......................27
Recording.........................27-28
DVD&HDDRecorderOverview.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
About word 'Original' and 'Playlist'
.
.
.
.
.
.
.
.
.
?
.
?
.
Abouttheinternalharddiskdrive.
.
.
.
.
Cards
.
.
.
.
.
.
.
.
.
.
.
.7
7
capable of displaying and saving
?RegardingWriteProtect...............7
7
Inserting/Removing the Memory Card.
NotesonJPEGRecordings...............8
NotesonMP3Recordings................8
.
.
.
.
.
.
.
.
.
.
?
?
.
.
.
.
.
.
.
?RecordMode......................27
?RecordAspect.....................27
?AutoChapter......................28
?DVRecAudio.....................28
Precautions...........................9
?V ideoRecAudio....................28
?Handlingtheunit....................9
?Cleaningtheunit....................9
Remote Control Operation Range.
9
Remote Control Battery Installation
9
Disc..............................28-29
?
.
.
.
.
.
.
.
.
.
.
.
.
.
?
?DiscFormat.......................28
?Finalize..........................29
?DiscLabel........................29
NotesonDiscs.........................9
?DiscProtect.......................29
?Handlingdiscs......................9
?Storingdiscs.......................9
?Cleaningdiscs......................9
AboutSymbols.........................9
?Aboutthesymboldisplay............9
About the disc symbols for instructions
9
UsingtheHomeMenu..................30
General Explanation of On-Screen Display. 31-33
Displaying Information While Watching TV 31
Displaying Disc Information on-screen 31-33
?
.
.
.
.
FrontPanel............................10
FunctionDisplayWindow................11
RemoteControlOverview................12
RearPanel............................13
?
.
.
?
.
PLAYBACK
Operation with HDD, DVD and Video
PlayingaHDD,DVD,orVideoCD.
CD
.
.
.
.
.
34-37
.
.
.
.
.34
GeneralFeature.......................34
?MovingtoanotherTITLE.............34
34
Moving to another CHAPTER/TRACK
?
.
PREPARATION
.
.
?Search...........................34
Connections........................14-18
?
Still Picture and
Frame-by-Frame Playback
.
34
ConnectingtotheAerial.................14
?SlowMotion.......................35
ConnectionstoYourTV.................15
?Random..........................35
Connecting
16
Connecting an external decoder box
ConnectingtoanAmplifier...............17
Accessory Audio/Video (A/V) Connections
?Repeat..........................35
?RepeatA-B.......................35
toRecorder..........................18
?MarkerSearch....................36
to
a
cable box
or
satellite receiver
.
.
.
.
.
.
.
.
.
.
16
.18
ConnectingaDigitalCamcorder.
BeforeOperation.....................19-33
InitialSettings.........................19
GeneralOperation.....................19
.
.
.
.
.
.
.
.
?T imeSearch.......................35
?Zoom............................36
?
.
Checking
the contents of
DVDVideodiscs:Menus.............36
?T itleMenu........................36
?DiscMenu........................36
?AutoProgram......................19
?ProgramEdit....................20-21
?CameraAngle.....................36
.36
ChangingtheAudioSoundtrack.
.37
?ChangingtheAudioChannel.
?AutoClockSet.....................22
?3DSurround......................37
?ManualClockSet...................22
?Subtitles..........................37
?TVAspect........................22
?ProgressiveScan...................23
?InstantSkip.......................37
.37
?FindingLocationsonaDisc.
?LastConditionMemory...............37
?PIP(PictureinPicture)...............37
General...........................19-23
?AV1Decoder......................23
?PBC.............................23
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Initialize..........................23
3
INTRODUC
Table of Contents
(Continued)
.38-40
AudioCDandMP3Operation.
.38
PlayinganAudioCDorMP3file.
?AudioCDmenuoptions..............38
?Musicmenuoptions.................38
Erasing MP3 file(s) or folder(s)
.38
fromtheHDDorMemoryCard.
?MovingMP3files...................39
39
Copying MP3 files to another media
?NaminganMP3file.................39
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.
.
.
.
.
?
.
?Pause...........................40
?MovingtoAnotherTrack..............40
?Repeat..........................40
?Random..........................40
?3DSurround......................40
Recording
Recording
from External
Components
from
Camcorder
a
Digital
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
51
51
WhatisDV?..........................52
?DV -RelatedMessages...............52
?T roubleshooting....................52
EDITING
Chapter List Menu Overview 53-54
.54
TitleList-HDDmenuoptions.
.54
TitleList-Originalmenuoptions.
54
Chapter List-Original menu options
.54
TitleList-Playlistmenuoptions.
54
Chapter List-Playlist menu options
HDD, VR Mode: Original and Playlist Editing 55-60
Titles,ChaptersandParts................55
AddingChapterMarkers.................55
55
Changing Title or Chapter Thumbnails
MakingaNewPlaylist...................56
Adding Additional Title/Chapters to the Playlist 56
57
Deleting an Original or Playlist Title/Chapter
DeletingaPart........................57
NamingaTitle........................58
Title List and
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.40
?Search...........................40
?RepeatA-B.......................40
Programmed Playback with Audio CD and MP3 41
JPEGFileOperation..................42-44
ViewingaJPEGDisc....................42
?Photomenuoptions.................42
?SkipImages.......................42
?RotateImages.....................42
Erasing JPEG file(s) or folder(s)
.42
fromtheHDDorMemoryCard.
.
.
.
.
Sort................................58
?
.
.
.
.
.
.
.
?V iewSlideShows...................43
CombiningTwoTitlesIntoOne.
.
.
.
.
simultaneously.....................43
?NamingaJPEGFile.................43
?MovingJPEGfiles..................44
?CopyingJPEGfiles.................44
RECORDING
RecordingOverview..................45-46
AboutDVDrecording...................45
Disc types and recording formats, modes,
andsettings.......................45
AboutHDDrecording...................45
?Notesforrecording..................45
.45
RecordingTVaudiochannels.
.45
Recordingtimeandpicturequality.
Restrictions on video recording.
46
?
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
?Whatis'CPRM'?...................46
?Copyright.........................46
Additional Information for Recording
46
?Clean-upRecording.................46
Playing Your Recordings on Other DVD
.46
Players(FinalizingaDisc).
Timeshift (Pause, Live TV/Playback) Setup
andOperation.........................47
BasicRecording........................48
BasicRecordingfromaTV...............48
InstantTimerRecording.................48
TimerRecording.....................49-50
50
Checking Timer Recording Details
.50
CancelingaTimerRecording.
Stopping a Timer Recording in Progress 50
Timer Recording Troubleshooting
50
.51-52
RecordingfromExternalInput.
.
.
.
.
.
.
.
.
.
.
.
.
.
.59
.60
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................60
Copying............................61-62
.
?To listen to music while slide show
.
DivideOneTitlesIntoTwo...............59
.
.
.
.
.
.
Introduction...........................61
?Restrictionsoncopying..............61
?Copyright.........................61
?High-speedcopying.................61
.61
OneTouchCopy(HDDtoDVD).
.61
OneTouchCopy(DVDtoHDD).
DubbingfromHDDtoDVD...............62
DubbingfromDVDtoHDD...............62
.63
VideoMode:OriginalEditing.
UsingtheTitleList.....................63
DeletingaTitle........................63
.63
Ifthedischasalreadybeenfinalized.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
REFERENCE
LanguageCodeList.....................64
CountryCodeList......................65
Controlling Your TV with the Supplied
RemoteControl........................66
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Troubleshooting.....................67-68
Specifications.........................69
About the
symbols
Indicates hazards
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
.
?
Indicates
special operating
Indicates
tips
features of this unit.
?
.
.
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
and hints for
making
the task easier.
DVD & HDD Recorder Overview
Recordable Discs
otes
on
DVDs and Video CDs
Some
12cm/8cm, single-sided, single layer disc
Approx.
max.
240 minutes
recording time (LQ mode):
(4.7GB), 80 minutes (1.46GB)
12cm/8cm, single-sided, single layer disc
Approx.
max.
240 minutes
recording time (LQ mode):
(4.7GB), 80 minutes (1.46GB)
otes
--
--
--
This recorder cannot record CD-R
or
CD-RW discs.
DVD-R/RW and CD-R/RW discs recorded
using
a
or
on
the recorder's lens.
If you record a disc
if it is recorded in a
in which it
using a personal computer, even
compatible format, there are
may not play because of the settings
Discs
Playable
DVD
(8
cm
disc)
can
On
DVD-R/DVD-RW
discs;
titles, MP3 files,
otes
ment
RW)
or
disc
DVD+R /
--
on
the conditions of the
the CD-R / RW
itself,
RW)
some
recording equip-
RW, DVD+R /
CD-R/RW (or DVD--R / RW,
(or
DVD--R /
discs cannot be
played
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
or
(the
title reference number
enabling
CD and audio CD
picture
or a
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
Types
There
and still
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
with the
irregularly shaped CDs (e.g., heart-shaped
octagonal). Doing so may result in malfunctions.
a
moving pictures
PBC
use
a
audio CD. Each track is
enabling
files; SVCD; and kodak picture CDs.
Depending
(Video
Scene
play
assigned
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Sections of
disc)
CD-R/CD-RW discs that contain audio
JPEG
Each title is
Audio CD
cm
feature content
you to locate it
(VCD)
(8cm/12cmdisc)
cm/12
accompanying
or
music album.
or an
(8
addition, this unit
(DVD only)
The main film content
Track
cm/12
Video CD
--
Disc-related terms
condensation
application software used to create the disc.
(Check with the software publisher for more detailed
information.)
--
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
Title
of the
or
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
personal computer or a DVD or CD recorder may not
play if the disc is damaged or dirty, or if there is dirt of
cases
In
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
system via
menus, search
functions,
or
other
typical computer-like operations. Moreover, high resolution still pictures can be played if they are included on
the disc.
Regional
code of the recorder and DVDs
This recorder is
designed and manufactured for
Region 2 encoded DVD software.
playback of
region code
The
cates which
This unit
on
the labels of
type of the recorder
some
can
2
DVD discs indi-
play
those discs.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
play only DVD discs labeled 2 or ALL. If
you try to play any other discs, the message "Incorrect
region code. Can't play back" will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
can
limits.
5
INTRODUC
DVD & HDD Recorder Overview
(Continued)
About DVD-R and DVD-RW disc
How
ote
DVD-R and DVD-RW discs different?
are
DVD-Video Format
The essential difference between DVD-R and DVD-RW
is that DVD-R is
is
a
a
record-once
medium, while DVD-RW
re-recordable/erasable medium. You
erase a
DVD-RW disc
can
approximately 1,000
re-record/
times.
recording
on
the DVD Forum in 2000. You may
problems playing recordable DVD
Symptoms
dropouts
ers.
video
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R discs and DVD-RW discs recorded in
Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the contents of the disc to make them readable to other DVD
players
DVD-Video discs.
as
DVD-RW discs recorded in VR
are
playable
in
mode
(Video Recording)
This indicates
ble of
Video
What
are
There
are
a product feature that is capaplaying DVD-RW discs recorded with
Recording format.
Is
DVD-R
disc, recordings
DVD-RW discs
or
Video mode
can
are
always
editing
artifacts, audio and/or
and
DVD like
a
editing
a
video
tape?
edits. With
DVD, you edit by making a 'Playlist' of what
and when to play it. On playback, the recorder
to
disc
About word
according
to the
and
'Original'
Playlist.
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
modes available
recorder: VR mode and Video mode.
a
format for
approved by
therefore experience
discs in some play-
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
?
recording
include video
a new
was
the edited version.
'recording modes'?
two
is
playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this recorder in other players.
play
plays the
players.
some
(Video mode)
DVD-R/RW discs that
using this
When recording
be formatted for VR mode
on
to
in Video mode.
recording
Original:
?
content refers to what's
actually
recorded
the disc.
content refers to the edited version of the
Playlist:
disc
---
how the
content is to be
Original
played.
recording.
Reset the recorder
VR mode
recording
?3different picture quality/recording time settings
able (HQ, SQ, LQ)
Not playable on regular DVD players
Recordings can be extensively edited
avail-
?
?
If you observe any of the
The unit is
or
plugged in,
following symptoms...
but the power will not turn
on
off.
The front
panel display is not working.
operating normally.
The recorder is not
Video mode
recording
picture quality/recording time settings available (HQ, SQ, LQ)
Playable on regular DVD players (after finalizing)
Limited editing features
?3different
?
?
...you
can
reset the recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
Many functions of this recorder are dependent on the
recording mode. One or more of the symbols
VR
Video
(,
) appear by each function explained
in this manual so that you can see at a glance whether
Unplug
the power
plug it in
and then
cord, wait
at least five
seconds,
again.
it's relevant for the disc loaded.
You
can
find
recording
more
modes
information
on
on
disc formats and
page 45.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
VR mode
Playback, recording, Original/Playlist editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
format
DVD-R
6
Recording
(default)
mode
Functions
DVD & HDD Recorder Overview
(Continued)
Cards
About the internal hard disk drive
?
The internal hard disk drive
fragile piece of
equipment.
following the guidelines below to protect against possible HDD failure.
We recommend that you back up your important recordings onto DVD-R/RW discs in order to protect against
Please
use
(HDD)
is
a
the recorder
Do not
move
the recorder while it is
?
Install and
?
Do not block the
?
Do not
rear
on a
use
can cause
be
hot
a cause
or
humid
Compatible
?
Use this unit to format
While the recorder is switched on, do not unplug from
the wall socket or switch the electricity off from the
Do not
move
the recorder
it off. If you need to
the steps below:
move
immediately
the
?
with: FAT 12, FAT 16,
or
FAT 32
memory card when using for
the first time. Note that the memory card may no
be usable
on
a
other
equipment
once
formatted
this unit.
Only
use
the memory cards recommended above.
Regarding
Write Protect
For cards that have
is
it will not be
on
protect switch, if the switch
write, erase or format the
possible
a
write
to
card.
of HDD failure.
breaker switch.
?
saving
(MMC)
(MS)
?
longer
condensation to form inside the
can
and
fan.
the recorder in
recorder. This
Stick
Memory
on
stable, level surface.
vent/cooling
displaying
Card
?
on.
excessively
places, or in places that may be subject to sudden
changes in temperature. Sudden changes in temperature
?
the recorder
use
of
capable
Memory
?M ulti Media Card
accidental loss.
?
SD
after
switching
Inserting/Removing
We recommend to insert
after
turning
the
Memory Card
or remove
the memory card
the unit off.
recorder, please follow
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
2.
Unplug
from the wall socket.
3. Move the
?
If there's
is
?
a
player.
power failure while the recorder is on there
chance that some data on the HDD will be lost.
a
Insert label side up.
The HDD is very delicate. If used improperly or in an
unsuitable environment, it is possible that the HDD
will fail after
a few years of use. Signs of problems
playback unexpectedly freezing and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
Inserting the card.
Insert straight-in until
include
of
HDD failure.
If the HDD
fails, no playback of recorded material
possible. In this case it will be necessary to
replace the HDD unit.
Removing
Press
on
it fits into
place.
the card
the center of the card.
will
be
otes
?
Keep
the memory card out of reach of children. If
swallowed, seek medical advice immediately.
?Amemory
card may not be used for this recorder
7
INTRODUC
DVD & HDD Recorder Overview
Notes
on
Depending
JPEG
on
(Continued)
Notes
Recordings
the size and number of JPEG
files, it
minutes,
some
of the files
are
too
big
MPEG1 audio
---
that have the
The recorder cannot read MP3 files that have file
The total number of files and folders
on a
media
free but the total number of files and folders
on
extensions other than
are
MP3 file
Some media may be incompatible due to different
recording formats or the condition of the media.
ited
When you are using software such as "Easy CD
Creator" to burn JPEG files on a CD-R, ensure that all
selected files have the
them into the CD
If the files have
them
".jpg"
layout.
extension before
1.
".jpe" or ".jpeg" extensions, please
".jpg" files.
".jpg" extension cannot be
read by this DVD player, even though the files are
shown as JPEG image files in Windows Explorer .
compatibility
with the recorder is lim-
follows:
as
CD-R/RW
physical
format should be "ISO 9660" and
"JOLIET".
2.
If you record MP3 files using software which cannot
a FILE SYSTEM (e.g., Direct-CD, etc.), it is
create
copying
as
without the
".mp3".
the
folder should be less than 1999.
names
compressed using the
layer 3 file-encoding scheme. Files
".mp3" file extension are called "MP3
files".
megapixels.
File
Recordings
An MP3 file is audio data
reduce the resolution of the JPEG files to less than 4
rename
MP3
About MP3
may take several minutes for the recorder to read the
content. If you don't see an on-screen display after
several
on
impossible
to
playback
MP3 files.
"Easy-CD
Creator"
is recommended.
3.
The total number of files and folders
are
on
the media
free but the total number of files and folders
on
the folder should be less than 1999.
This recorder
requires discs/recordings
to meet certain
technical standards in order to achieve
quality.
Pre-recorded DVDs
these standards. There
are
optimal playback
automatically set to
many different types of
recordable disc formats (including CD-R containing MP3
are
files) that require certain pre-existing conditions (see
above) to insure compatible playback.
Please note that
permission
is
required
in order to
download MP3 files and music from the Internet.
Our company has no right to grant such permission. Permission should always be sought from the
copyright
8
owner.
DVD & HDD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
Discs
discs
Do not touch the
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
disc
by
the
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
the disc.
on
INTRODUC
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
volatile
use
such
liquids,
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
long period
playing,
plastic products in
of time. They will
as there may be a considerable
increase inside the car.
a
use a
the unit
solution. Do not
benzine,
or
lightly
thinner,
as
are
moistened with
strong
use
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
soft, dry cloth. If the surfaces
soft cloth
temperature
the surface.
To clean the cabinet
Use
case.
light,
Cleaning
Cleaning
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
insecticide spray,
or
discs
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
ter outward.
alcohol,
the surface
of the unit.
Yes
To obtain
a
clear
The recorder is
No
picture
high-tech, precision
a
device. If the optipick-up lens and disc drive parts are dirty or worn,
the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
cal
Remote Control
Operation Range
Point the remote control at the remote
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
Symbols
About the
sensor
and press
"
the buttons.
records.
vinyl
symbol display
"
may appear on the TV
This icon means the function
Remote Control
Battery
Installation
manual is not available
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
with
the
rear
of
two R03
and
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
About the disc
on
during operation.
explained in this owner's
that specific disc.
symbols
A section whose title has
applicable only
symbol.
are
screen
for instructions
one
of the
to those discs
HDD
Hard Disk Drive
M/C
Memory
Video
DVD-R/RW with Video
VR
following symbols
represented by the
Card
DVD-RW with VR
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
JPEG
JPEG Disc
recording
recording
mode
mode
9
Front Panel
>/M
Go to NEXT
Press and hold for two seconds for
fast forward search
a
chapter/track.
during playback.
STOP
Stops playback
or
(x)
recording.
m/.
Go to
beginning
of current
chapter/
Press and hold for two seconds for
a
track
fast
or
to
previous chapter/track.
search during playback.
reverse
PAUSE
Pause
playback
or
recording temporarily,
press
again
POWER button and indicator
Switches the recorder ON
or
REC
Starts
OFF.
recording.
Press
repeatedly
to set the
up red when the
recorder is in standby mode.
Lights
recording
(z)
time.
PLAY
Starts
(N)
playback.
TIMESHIFT
Activates pause live
TV/playback (timeshift)
for
a
live TV program.
PR
Scans up
or
down
through
(+/-)
memorized channels.
Remote Sensor
Point the recorder remote control here.
Disc
Insert
a
Tray
disc here.
OPEN/CLOSE
Opens
or
closes the disc
(Z)
tray.
Display
window
Shows the current status of the recorder.
MEMORY CARD Slot
Insert
a
memory card
(SD,
MMC
or
MS).
DV IN
Connect the DV
Connect the S-Video
output of
an
external
source
output
of
a
digital
camcorder.
INPUT 4 (S-VIDEO IN)
(TV/ Monitor, VCR, Camcorder, etc.).
INPUT4
(VIDEO
Connect the audio/video
IN/AUDIO IN
(Left/Right))
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
10
(X)
to exit pause mode.
Function
Display
Window
REC The recorder is
recording.
Indicates when the recorder is in timer
recording
or a
timer
Indicates
ST
BIL
Indicates
Indicates when
a
stereo broadcast is
TRK
is
programmed.
INTRODUC
HQ, SQ, LQ
recording mode.
received.
BILINGUAL broadcast
a
is
CHP
being
recording
Indicates current
being
chapter
received.
number.
Indicates current track number.
TV
Indicates when the
recorder is in TV tuner mode.
TITLE
Indicates current title
number
T/S
Indicates the
timeshifting
DVD
A
SVC D
mode.
-RW
T/S
TITLE
TV
TRK
CHP
BIL
ST
REC
HQSQLQ
-RW
Character indicators
Indicates clock, total playing time, elapsed time,
chapter/track number, channel, etc.
title
number,
Disc type indicators
Indicates the type of disc loaded.
11
Remote Control Overview
POWER
Switches the recorder ON
or
OFF.
TV/DVD
To view channels selected
recorder tuner
or
by
the
by
the TV tuner.
3D SURR.
Selects 3D SURROUND
during
playback.
PIP
Selects PIP function
off.
on or
OPEN/CLOSE
(Z)
and closes the disc
Opens
tray.
TV Control Buttons
POWER: Turns the TV
AV: Selects the TV's
off.
on or
source.
PR +/--: Selects TV's channel.
VOL +/--:
Adjusts TV's volume.
Temporarily turns TV sound
OFF, press again to restore.
MUTE:
SKIP(./>)
Go to next
0-9 numerical buttons
Selects numbered
in
options
a menu.
AV
the
Changes
input to use for recording
(Tuner, AV1-4, or DV IN).
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects
a
subtitle
language.
ANGLE
Selects
a
DVD
camera
angle,
if available.
REC
Starts
recording.
Press
(z)
repeatedly to set
recording time.
the
REC MODE
Selects the
mode:
recording
HQ, SQ,
or
LQ.
chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
SCAN(m/M)
Search backward
PAUSE/STEP
Displays
Timer Record
TIMESHIFT
Marks any
N
Marker Search
menu.
or removes
the
Setup
menu.
DVD to HDD
(or
HDD to
(INSTANT SKIP)
15 seconds forward
(about
the
DVD).
length
of
on
the disc
typical TV
commercial).
a
TITLE
Displays
the disc's Title menu, if
available.
CHP ADD
Inserts
chapter marker when playing/
recording a VR mode DVD-RW disc.
a
or
recording.
HOME
Accesses
or removes
the HOME
Accesses
Playlist
DVD disc Switches
menu on a
between Title
and Title List-
List-Original
menu.
ENTER
-
Acknowledges menu selection.
Displays information while viewing
a
TV program.
b / B / v / V
Selects
v / V
an
(left/right/up/down)
option
in the
menu.
(up/down)
down
or
memorized
through
DISPLAY
Accesses On-Screen
RETURN
-
-
(O)
Removes the
Displays
Display.
the
menu.
of
menu
video CD
a
with PBC.
THUMBNAIL
Selects
thumbnail
a
picture
chapter for
Playlist menu.
current title and
Original
and
for the
use
RANDOM
Plays
tracks in random order.
REPEAT
all.
Repeat chapter, track, title,
A-B
Repeat
sequence.
ZOOM
Enlarges
DVD video
image.
CLEAR
Removes
Program
a
track number
List
or a
Marker Search
12
menu.
MENU/LIST
Scans up
I.SKIP
Skips
(x)
Stops playback
channels.
DUBBING
Copies
playback.
STOP
MARKER
SETUP
Accesses
(PLAY)
Starts
point during playback.
SEARCH
Displays
(X)
playback or recording temporarily, press again to exit pause mode.
menu.
Activates pause live TV/playback
(timeshift) for a live TV program.
forward.
Pause
-
TIMER REC
or
mark
menu.
on
on
the
the
in the
Rear Panel
AERIAL
Connect the aerial to this terminal.
EURO AV 2 DECODER
Connect the audio/video
Set
output of
an
external
source
(Pay-TV decoder,
Top Box, VCR, etc.).
COAXIAL
Connect to
INTRODUC
(Digital audio out jack)
digital (coaxial) audio equipment.
COMPONENT VIDEO OUT / PROGRESSIVE SCAN
Connect to
a
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
a
(Y
Pb
Pr)
inputs.
(Left/Right)
TV with video and audio
VIDEO IN 3 / AUDIO IN 3
inputs.
(Left/Right)
Connect the audio/video
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
AC Power Cord
Plug
OPTICAL
into the power
source.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
S-VIDEO OUT
Connect to
a
S-Video
Input
on
TV.
VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT / PROGRESSIVE SCAN
EURO AV1 AUDIO/ VIDEO terminal
depending
on
or
RGB
signal
of
how you connect the recorder to
the TV.
EURO AV 1 AUDIO/VIDEO
Connect to
a
TV with SCART
jack.
RF. OUT
Passes the
signal
from the AERIAL to your TV/monitor
Caution
Do not touch the inner
pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
13
Connections
to the Aerial
Connecting
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
input
on
Plug
one
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
on
your TV set.
RF coaxial connection
Connect the RF. OUT
input jack on
supplied (R).
through from
jack on the recorder to the aerial
using the 75-ohm Coaxial Cable
The RF. OUT jack passes the signal
the AERIAL jack.
the TV
Rear of TV
Aerial
SCART INPUT
ANTENNA
INPUT
AUDIO INPUT
L
VIDEO
INPUT
R
R
Rear of the recorder
14
Connections
ips
Depending
to
(Continued)
Connections to Your TV
on
your TV and other equipment you wish
are various ways you could connect
Make
connect, there
the recorder. Use
only
one
the
of the connections
When
described below.
jack,
set the VIDEO OUTPUT
using
the SCART
set the VIDEO OUTPUT switch to RGB.
the recorder is connected
directly to the
input channel.
AUDIO OUT jack to the
Connect the EURO AV1 AUDIO/VIDEO scart
jack
TV. Tune the TV to the correct video
the recorder to the
the TV
Do not connect the recorder's
using
sure
of your audio system.
Do not connect your recorder via your VCR. The DVD
image could be distorted by the copy protection sys-
phono
--
jacks,
SCART connection
Caution
--
in
on
the COMPONENT VIDEO OUT / PRO-
using
switch to COMPONENT. When
best connections.
Make
following connections, depending
existing equipment.
of your
GRESSIVE SCAN
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
--
of the
one
capabilities
jack (record deck)
in
corresponding
cable (T).
the scart
jacks
on
on
Video connection
Connect the VIDEO OUT
the recorder to the
tem.
video in
video cable
Rear of TV
S-Video connection
SCART INPUT
S-VIDEO
INPUT
COMPONENT VIDEO INPUT
Y
Pb
Pr
AUDIO INPUT
L
VIDEO
INPUT
jack
on
the TV
jack on
using the
(V).
Connect the S-VIDEO OUT
the recorder to the
S-Video in
S-Video cable
jack
R
Component
on
jack on
using the
the TV
(S).
Video connection
Connect the COMPONENT VIDEO OUT / PROGRESSIVE SCAN
input jacks
T
S
C
AV
jacks
on
the recorder to the
on
the TV
using
an
corresponding
(C).
Y Pb Pr cable
Progressive Scan (ColorStream Pro)
connection
If your television is a high-definition or "digital ready" television, you may take advantage of the recorder's pro-
gressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
Connect the COMPONENT VIDEO OUT / PROGRESSIVE SCAN
in
jacks
on
jacks
the TV
the recorder to the
on
using
corresponding
(C).
the Y Pb Pr cable
Notes
--
Rear of the recorder
--
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 23.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
tray. See that "no
disc" is
window. Then press
releasing it.
displayed
on
the
display
STOP and hold it for five seconds before
--
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
analog
video
S-VIDEO
connection.
Audio
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
recorder to the audio left and
using
jacks of the
jacks on the TV
right
(A). Do not connect the
OUT jack to the phono in jack (record
the audio cables
recorder's AUDIO
deck)
IN
of your audio
system.
15
PREATION
Connections
(Continued)
to a cable box or
Connecting
Connecting
satellite receiver
If you have
decoder,
a
cable
or
satellite receiver with
a
built-in
connect it to this recorder and your TV
If you have an external, dedicated decoder box for your
satellite or cable TV system, use the setup described on
as
on this page. If you are using a separate
decoder box for your cable/satellite TV, set up following
the instructions on the right.
this page you can:
Record any channel by selecting it on the cable
box/satellite tuner.
?
the
setup
on
Connect RF cables
1
as
this page.
1
2
shown.
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
SCART AV connector
a
on your TV.
This enables you to watch discs.
Use
3
a
DECODER connector to
a
SCART AV connector
on
input
on
your cable/satellite tuner.
SCART cable to connect your decoder to
cable/satellite
tuner.
your
See the manual for your decoder box for more
a
Use
a
SCART cable to connect the EURO AV2
DECODER connector to
SCART AV connector
a
ip
'loop through'
a
allows you to record
tuner in this
a
function. This feature
TV program from the built-in TV
a satellite or cable
recorder, while watching
(see
page
48).
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
a
SCART AV connector
your TV.
Caution:
Caution:
lite receiver
directly
or
cable box.
to your TV
Information from the decoder
pay TV services), is
is off (in standby).
For timer
recording
only
directly
to this
(for example, relating
'through' your VCR, satelAlways connect each compo-
or
to
viewable when this recorder
to work
properly
on
this
recorder,
the satellite/cable box must also be switched
Do not connect this recorder
on
your satellite/cable box.
Do not connect your decoder box
recorder.
This recorder has
nent
Use
on
your satellite/cable box.
This enables you to record scrambled TV channels.
channel
3
4
SCART cable to connect the EURO AV2
Connect the cable from the aerial/cable TV outlet to
the aerial
detailed instructions.
This enables you to watch and record TV channels.
2
external
decoder box
shown
Using
an
ing recording.
It is not possible to watch
another using this setup.
one
on
dur-
TV program and record
AV receiver.
Decoder
Aerial/
SCART AV
Cable TV
Wall Jack
Aerial/Cable TV
Wall Jack
Cable Box
or
Satellite Receiver
Cable Box
or
Satellite Receiver
AERIAL
INPUT
AERIAL
OUTPUT
SCART AV1
SCART AV2
Rear of the recorder
16
AERIAL
INPUT
AERIAL
OUTPUT
SCART AV1
SCART AV2
Rear of the recorder
Connections
Connecting
(Continued)
to an
Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
Right
amplifier, receiver,
(A).
stereo
or
PREATION
AUDIO OUT
jacks on the
jacks on your
system, using the audio
recorder to the audio left and
in
right
cables
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
Connect
1
one
X
A
O
of the recorder's DIGITAL AUDIO
OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
You will need to activate the recorder's
2 put. (See
"Audio"
on
page
COAXIAL
DIGITAL INPUT
digital
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
out-
Amplifier (Receiver)
25).
Multi-channel sound
Digital
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
otes
--
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--To
see
--
the audio format of the current DVD in the
on-
press AUDIO.
This recorder does not perform internal
screen
display,
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
17
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to recorder
Connecting
Using
Connect the
input jacks (AV3, AV4) on the recorder to
the audio/video out jacks on your accessory component, using audio/video cables.
Use
a
Digital Camcorder
the front
connect
tapes
a
or
a
DV
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
DVD-R/RW discs to DVD-R/RW
DV cable
(not supplied)
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
panel
DV IN
This
connection to DV
not
with
digital
equipment only.
satellite tuners
or
video decks.
R
DV
Digital
L
DV
IN/OUT
OR
S-VIDEO
OUTPUT
OR
Rear of
the recorder
18
Front of
the recorder
Front of the recorder
It is
D-VHS
AUDIO
OUTPUT
VIDEO
OUTPUT
jack
ote
jack is for
compatible
DV
HDD.
to connect the DV in/out
of your DV camcorder to the front
of this recorder.
jack
ote
or
Camcorder
Before
Initial
In this
Operation
General
Settings
menu
system, there
several ways to
are
Auto
cus-
settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu sys-
Program
tomize the
tem will appear
on
the TV
els, you will
to
help
see
"B"
screen.
The third level
can
be
B. For
displayed by pressing
on
the
navigating the menu levright side of the menu label
This recorder is
synthesized
equipped with a frequency
capable of receiving up to
tuner
Preparation:
Connect the recorder to the desired
shown in
to the Aerial
Connecting
type of aerial,
as
page 14.
on
you go to the next level.
Auto
To
88 TV
channels.
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
bring
Program
Program
Edit
Stop
Searching
11%
Clock set
TV
Aspect
Progressive Scan
AV1 Decoder
To go to the next level:
Press B on the remote control.
PBC
Initialization
To go back to the previous level:
Press b on the remote control.
General
1
2
1
Operation
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the desired
While the desired item is
3
4
5
6 press
move
option.
selected, press B
to
to the second level.
Use v / V to select the second desired
Press B to
move
option.
to the third level.
Press SETUP.
The
Setup
setting
then
appears.
2
3
4
5
6
While the General
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the Auto
Press B to
move
"Start" icon is
Program option.
to the third level.
highlighted.
Press ENTER to
begin the channel search.
automatically cycle through all
channels in the area and place them
The tuner will
available
Use v / V to select the desired
menu
Use v / V to select the General
in
the tuner's memory.
ENTER to confirm your selection.
require additional steps.
Some items
7
Press SETUP to exit the
Setup
menu.
19
PREATION
Before
Operation (Continued)
Program
Edit
You
a
can
move,
edit
8
channel
manually (add, delete,
Press RETURN
List
Program
Program
You
Edit
Program
Edit
nels
Clock set
TV
Aspect
Edit
perform
manually.
can
a
search to select and store TV chan-
1. Use v / V to select
Progressive
Scan
menu
AV1 Decoder
The
PBC
a program
then press ENTER.
menu
options
2. Use v / V to select
2
'Program
options then press ENTER.
Program Edit menu appears.
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the General
While the General
move
List
is selected, press B to
option
Edit'
option
from the
option.
PR
3
4 press
Program
the left side of the
on
appears
the
on
menu.
Initialization
1
Program
name,
etc.).
Auto
to exit
(O) repeatedly
menu.
Seek
07
Ch.
MFT
C7
0
OK
to the second level.
Use v / V to select the
B to
move
"Edit" icon is
Program
Edit
option
then
to the third level.
3. See the
highlighted.
Press ENTER.
5 Program
List
PR-01
b / B
menu
appears.
on
below to
use
Program
Edit
(left/right):
Moves the
cursor
to the
previous
or
next column.
PR
Ch.
MFT
Station
01
C12
+10
BBC1
02
C23
0
BBC2
ITV
03
C7
0
04
C27
-10
05
C17
0
CHTV
06
C33
0
WEST
07
C34
+20
ANGLI
08
C47
0
ABC
09
C10
-60
TV2
v / V
cursor
(up/down): Changes
position.
the
PR: Indicates program number
CH2
Decoder NICAM
Seek: Searches
a
Searching stops
setting
at the current
(display only)
station
b / B to select Seek
10
automatically. Use
option then press v / V.
when the recorder tunes in
a
sta-
tion.
11
Select
descriptions
menu.
Move
Close
Page Up/Down
Ch.:
Changes the channel number to
option then press v / V.
edit. Use b / B
to select Ch.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
display.
appears
on
the left side of the
menu
7
Use v / V to select
an
then press ENTER
option
to confirm.
Program
Edit
Program
Edit: Edits the
Station Rename
selected program.
Move
Station Rename: Edits the
Delete
station
Decoder On / Off
Move: Moves the
Nicam Auto / Off
location
name.
on
program's
the program list.
Delete: Deletes the program
from program list.
Decoder On / Off: Set the
decoder for the program to On
or Off.
Nicam Auto / Off: Set the
NICAM function to for the
program Auto
20
or
Off.
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
Before
Operation (Continued)
Edit
Program
Sort TV channels
(Continued)
You
Station Rename
You
independently.
The
be
can
options
1. Use v / V to select
a program
then press ENTER.
menu
a program
then press ENTER.
menu
Names
long.
1. Use v / V to select
menu
manually
program's position
on
the
Program
List
menu.
stations
can name
up to 5 characters
sort the
can
appears
the
on
Program
List
The
options
menu
Program
List
the left side of the
on
appears
the
on
menu.
the left side of the
on
menu.
2. Use v / V to select 'Move'
from the
option
options
then press ENTER.
2. Use v / V to select 'Station Rename'
option
from the
options then press ENTER.
Keyboard menu appears.
3. Use v / V to select
a
desired
position
then press
ENTER to store.
Deleting
ABC
You
Alphabet Capital
123456789
0
ABCDEFGH
J
I
a
program
delete
can
a
program
on
the
1. Use v / V to select
menu
KLMNOPQRST
The
UVWXYZ
menu.
a program
then press ENTER.
menu
options
appears
on
Program
on
the
List
menu.
Program
List
the left side of the
2. Use v / V to select 'Delete'
Delete
Space
OK
then press ENTER. The
Cancel
3.Enteranameforthestation.Useb/B/v/Vto
select
character then press ENTER to confirm your
selection.
?
a
Alphabet Capital:
case
Switches the
?A lphabet Small: Switches the
case
?
keyboard
upper
characters.
keyboard
to lower
?
?
?
Switches the
keyboard
to
symbol
char-
1. Use v / V to select the program you wish to link with
the decoder function on the Program List menu then
press ENTER.
The menu options appears
2. Use v / V to select 'Decoder'
Inserts a space at the cursor position.
Delete: Deletes the previous character at the
position.
b / B: Moves
Setting
option
from the
options
On, 'Decoder'
N
cursor
(PLAY):
Inserts
(PAUSE/STEP):
cursor position.
(STOP),
at the
to left
or
right.
This recorder
to poor
can
a
space at
Deletes the after character at the
reception,
The
character
can
menu
options
occurs, due
switch Off
a program
then press ENTER.
appears
on
on
the
Program
List
the left side of the
menu.
2. Use v / V to select 'Nicam Auto / Off'
option
then press ENTER. If you select
'NICAM' appears on the menu screen.
options
previous
receive Hi-Fi sound transmissions in
However, if sound distortion
you
1. Use v / V to select
entering a name
the cursor position.
CLEAR: Deletes the
cursor
the NICAM Auto/Off
NICAM Stereo.
Remote control buttons for
x
the left side of the
Cancel: Cancels all entered characters.
Space:
menu
X
on
menu.
then press ENTER. If you select
appears on the menu screen.
OK: Select to finish.
cursor
?
the Decoder On/Off
characters.
Symbol:
acters.
?
Setting
option from the options
Program is deleted.
from the
Auto,
position.
. / >: Moves
cursor
to left
or
right.
Enters the character of corresponlocation on the selected column.
Numbers
(0-9):
ding
MENU/LIST, DISPLAY: Switches the keyboard type
(Alphabet Capital, Alphabet Small, Symbols)
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
21
PREATION
Before
Operation (Continued)
Auto Clock Set
Manual Clock Set
When Channel auto search is
and Date
are
also set
recorder
completed the actual Time
automatically. If the time in the
is not correct, the clock must be set
display
manually.
Auto
1
Follow
steps 1-5
Use v / V to select the Manual
2 press
Auto
Edit
Auto
Clock set
TV
Manual
TV
Scan
Date
--
/
2
3
4
5
6
7
Setup
Year
Initialization
Time
menu
--
:
--
3
appears.
or
option
is selected, press B to
Use v / V to select the Clock set
move
/
--
(left/right):
Moves the
--
cursor
the
(up/down): Changes
position.
:
--
to the
previous
setting
at the current
Press ENTER to confirm your setting, then
to exit the Setup menu.
ote
After manual clock
option
Time
4 press SETUP
option.
to the third level.
Use v / V to select the Auto
Initialization
----
next column.
cursor
to the second level.
Press B to
--
Enter the necessary information for date and
b / B
menu.
PBC
Year
time.
v / V
move
Date
----
Use v / V to select the General
While the General
Manual
Scan
AV1 Decoder
PBC
Press SETUP.
The
then
Auto
Aspect
Progressive
--
AV1 Decoder
1
option
Set).
Edit
Clock set
Progressive
Clock
Program
Program
Aspect
(Auto
ENTER.
Program
Program
shown left
as
automatically
then press
setting,
the clock will be
but the date will not
updated
updated.
ENTER.
Press SETUP to exit the
Setup
menu.
TV
Aspect
You
can
-
ote
There
are cases
where the TV station does not
send,
sends wrong date and/or time information and the
recorder sets the incorrect time.
If this
happens,
manually.
we
choose:
4:3 Letter Box: Select when
connected.
or
Displays
bars above and below the
-
a
standard 4:3 TV is
theatrical
images
picture.
4:3 Pan Scan: Select when
a
with
conventional TV set is
connected. The video material formatted in the Pan &
recommend that you set the clock
-
Scan
is
the
are
style
picture
played back
cut off).
16:9 Wide: Select when
Auto
a
in that
style (Both
Edit
Clock set
TV
Aspect
Progressive
4:3 Letter Box
Scan
AV1 Decoder
PBC
Initialization
sides of
16:9 wide TV is connected.
Program
Program
22
masking
4:3 Pan Scan
16:9 Wide
Before
Operation (Continued)
Progressive Scan
PBC
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to ON.
The PBC
(PBC)
-
ON:
setting
to ON
or
be
can
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
are
played
to the
PBC.
-
OFF: Video CDs with PBC
as
the
same
way
Audio CDs.
Auto
Program
Edit
Program
Clock set
Auto
Program
TV
Edit
Program
Progressive
Clock set
TV
Aspect
Scan
AV1 Decoder
Aspect
Progressive Scan
OFF
AV1 Decoder
ON
PBC
OFF
Initialization
ON
PBC
Initialization
Initialization
You
Note
Progressive
menu
Scan will not be
displayed
in the
setup
when the VIDEO OUTPUT switch is set at RGB
can
Memory
1.
position.
reset the recorder
or
initialize the HDD and
Card.
Press v / V to select the desired
option
then press
ENTER.
The confirm message will appear.
Caution
2.
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
Remove any disc from the unit and close the disc
on the display
tray. See that "NO DISC" is displayed
-
releasing
standard
visible
it. The video
setting
on a
and
a
output
will be restored to the
-
picture will once again be
analog TV or monitor.
how to connect
For
viewing
decoder
a
or
recording
encoded program from EURO AV1 AUDIO/VIDEO
connector, you do not have to control anything. You just
an
shortly
AV button and wait
by pressing
decoding will start.
source
until the
recorded
and
can
Country Code)
(Hard
Disk
Drive):
the HDD will be erased.
on
M/C format: Initializes the M/C
everything
recorded
the
on
(Memory Card):
Memory Card will be
erased.
Program
Program
already described,
pay-TV station on page 16.
select AV1
HDD format: Initializes the HDD
Auto
We have
of
-
(Rating, Password,
conventional
AV1 Decoder
for
If you need to, you can reset the
recorder to all its factory settings. Some options
everything
Press STOP and hold it for five seconds before
"Cancel" then press
Factory Set:
not be reset.
window.
2)
or
ENTER.
to On in error, you must reset the unit.
1)
Use b / B to select "OK"
Choose 'ON' if your recorder is connected with
decoder, otherwise leave it set to 'OFF '.
Auto
Edit
Clock set
TV
Aspect
Progressive
Scan
AV1 Decoder
Set
PBC
Factory
Initialization
HDD format
M/C format
a
Program
Edit
Program
Clock set
TV
Aspect
Progressive Scan
AV1 Decoder
OFF
PBC
ON
Initialization
23
PREATION
Before
Operation (Continued)
Language
Display
Select
a
Menu
language
for the
Setup
menu
and
on-screen
display.
Display Menu
English
Disc Audio
Deutsch
Disc Subtitle
Italiano
Disc Menu
Disc
Language
Select
-
a language for the disc's Menu, Audio,
Original: The original language set for the
and Subtitle.
disc is
selected.
-
Other:
To select another
language,
select Other
then press ENTER. Use the numbered
and ENTER buttons to key-in the
option
corresponding 4-digit number according to
the language code list on page 64. If you a
mistake before pressing ENTER,
press b repeatedly to delete one by one and
correct it.
Display Menu
Original
Disc Audio
English
Disc Subtitle
French
Disc Menu
German
Spanish
Italian
Chinese
Polish
Hungarian
Other----
24
Before
Operation (Continued)
Sampling Frequency
Audio
Each DVD disc has
Set the recorder's
audio
system you
variety of audio output options.
Audio Output according to the type
a
of
use.
or
select 48 kHz. When this choice is
signals,
PCM: Select when connected to
a
2-channel
The recorder's
digital audio outputs
PCM 2ch format when you play a DVD video
on the Dolby Digital recording system.
or
other
is NOT
capable
of
handling
made, this unit will automatically convert any 96 kHz
to 48 kHz so your system can decode them.
digital
stereo
sounds in the
If your receiver
or
96 kHz
select 96 kHz. When this choice is
signals,
with
equipment
Dolby Digital
PCM
DTS
Bitstream
a
amplifier
is
capable
of
handling
PREATION
made, this unit will pass each type of signal through
without any further
disc recorded
processing.
Dolby Digital
DTS
Bitstream: Select "Bitstream" if you connected the
recorder's DIGITAL OUT jack to a Dolby Digital decoder
(or an amplifier
decoder).
amplifier
signals
Dolby Digital
amplifier.
If your receiver
96 kHz
MPEG
Dolby Digital
Sampling freq.
48KHz
Vocal
96KHz
DRC
MPEG
Sampling freq.
Vocal
Vocal
Set Vocal to ON
DRC
DVD is
playing.
only
when
a
multi-channel karaoke
The karaoke channels
on
the disc will
mix into normal stereo sound.
DTS
Dolby Digital
DTS
OFF: If you select "OFF", the DTS
through the DIGITAL OUT jack.
signal
is not
Bitstream: Select "Bitstream" if you connected the
recorder's DIGITAL OUT jack to a DTS decoder (or
amplifier
or
other
equipment
with
DTS
a
MPEG
output
Sampling freq.
Vocal
OFF
DRC
ON
an
decoder).
Dolby Digital
DTS
OFF
MPEG
Bitstream
DRC
Sampling freq.
Vocal
(Dynamic Range Control)
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
DRC
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
MPEG
and the
at
PCM: Select when connected to
stereo
amplifier.
The recorder's
a
2-channel
digital
audio
digital
a
listen to
a
movie
of sound. Set
DRC to ON for this effect.
DVD
Dolby Digital
DTS
system.
MPEG
Bitstream: Select "Bitstream" if you connected the
recorder's DIGITAL OUT jack to a MPEG decoder (or
amplifier
quietest ones). Then, you may
losing clarity
lower volume without
outputs
sounds in the PCM 2ch format when you play
video disc recorded on the MPEG2 recording
an
a
or
other
equipment
with
a
MPEG
decoder).
Sampling freq.
Vocal
DRC
OFF
ON
Dolby Digital
DTS
MPEG
PCM
Sampling freq.
Bitstream
Vocal
DRC
25
Before
Lock
Operation (Continued)
If you
(Parental Control)
If you
Set Password
word,
code
forget your 4-digit
forget your password, to clear the current passfollow the procedure below.
1. Press SETUP to
display
the
Setup
menu.
2. Use the Number buttons to enter the
Rating
Set Password
Country code
Chang
number
6-digit
"210499".
New Password
Delete
3. Select "OK" then press ENTER. The 4-digit
is cleared. Enter a new code as shown left.
password
Rating
Movies
1
Press SETUP.
information that
certain
Setup
menu
appears.
2
3
4
5
6
While the Lock
move
is selected, press B to
to the second level.
Press B to
option
option.
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security pass-
repeatedly
mistake before
to delete
pressing ENTER,
password numbers one by
press b
one
then correct it.
9
Ratings
are
alternative
While
country-dependent.
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
4-digit password again
verify.
If you
No Limits
Set Password
Level 8
Country code
Level 7
Level 1
1
mistake before
to delete
Follow
steps 1-3
as
(Kid)
shown above to the left
(Set
Password).
Use v / V to select the
Press B to
move
Rating option.
to the third level.
6 as shown above to the left
tons. One
Eight (8)
has the least
has the most
not active. The disc will
restrictions.
restrictions.
playback
No Limit: If you select No
Limit, Parental Control is
play
in full.
Level 1 to 8: Some discs contain
able for children. If you set
scenes
not suit-
rating for the recorder,
all disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played
and press
pressing ENTER, press
password numbers one by
(Adult)
3
step
(Set
4 Password).
5Selecta ratingfrom1to8usingthev/Vbut(1)
playback
an
alternative
scene
a
is available
The alternative must have the
b
lower
one
one.
If
no
same
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
then correct it.
6
26
Rating
Level 2
unless
a
being played
played with
Level 3
ip
repeatedly
The Parental Control
Level 4
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER.
ENTER to
rated
Level 5
a
Enter the
to
or
scenes.
Follow
"Change"
disc
scenes are
Level 6
2
ip
a
complete
a
word, then press ENTER.
If you make
to the
the disc. These
feature allows you to prevent discs from
by your children or to have certain discs
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
8
applies
scenes on
to the third level.
move
not suitable for
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
option.
Use v / V to select the Set Password
scenes
Therefore, discs may contain Parental Control
The
Use v / V to select the Lock
7
DVDs may contain
on
children.
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
Before
Country
Operation (Continued)
Code
Enter the code of
a
Recording
country/area
used to rate the DVD video
(See "Country
Code
whose standards
disc, referring
were
to the list
List", page 65.).
Record Mode
You
can set the picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality).
Rating
Set Password
Rec Mode
US
Country code
Rec
HDD
HQ
Aspect
Auto
DVD-VR
Chapter
HQ
DV Rec Audio
Video Rec Audio
DVD-Video
HQ
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Lock
3
4
5
6
While the Lock
move
1
option.
is selected, press B to
to the second level.
option
Use v / V to select the
Press B to
move
Country
code
option.
to the third level.
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passa
word, then press ENTER.
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the
3
4
5
6
7
While the
Use v / V to select the Rec Mode Set
Press B to
(HQ, SQ,
Press B to
Press B to
If you
a
mistake before
repeatedly
to delete
pressing ENTER, press
password numbers one by
9
b
option
then
use
desired Record Mode for
a
(HQ, SQ,
or
LQ)
to Video Mode
move
option
then
use
desired Record Mode for
a
(HQ, SQ,
or
LQ).
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
Record
7
Select the first character
8
Shift the
9
Press ENTER to confirm your country code
selection, then press SETUP to exit the menu.
Aspect
the v / V
When DVD
buttons.
cursor
desired Record Mode for
to VR Mode
move
v / V to select
highlighted.
one
then correct it.
using
a
LQ)
or
v / V to select
is
option
Use v / V to select
HDD
option.
to the third level.
move
The HDD Mode
DVD-Video Mode
ip
is selected, press B
Recording option
to move to the second level.
DVD-VR disc
8
Recording option.
using B buttons and select
using v / V buttons.
the
recording, you can set the recording aspect
ratio to suit the material you're recording (16:9 or 4:3).
second character
Rec Mode
Rec
Aspect
Auto
Chapter
4:3
16:9
DV Rec Audio
Video Rec Audio
27
PREATION
Before
Auto
Operation (Continued)
Disc
Chapter
When
recording in Video mode, chapter markers are
put in specified setting. You can change this interval to
3 minutes, 5 minutes or 10 minutes. If you select None,
switch off automatic
No
chapter marking altogether
Separation setting.
with the
Rec Mode
Rec
Disc Format
If
you're recording on a DVD-R disc, the recording
always be Video mode.
If you are using a DVD-RW disc, by default it will be
mode. You can change this to Video mode from the
Setup menu.
mode will
Aspect
VR
Auto
Chapter
None
DV Rec Audio
3 Min
Video Rec Audio
5 Min
Start
Disc Format
Finalize
Disc Label
10 Min
Disc Protect
DV Rec Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
the other
shooting;
overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
is for
Rec Mode
Rec
Aspect
Auto
Chapter
DV Rec Audio
Audio 1
Video Rec Audio
Audio 2
1
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Disc
3
4
5
6
While the Disc
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the Disc Format
Press B to
move
Start icon is
option.
to the third level.
highlighted.
Press ENTER.
Format Disc
menu
appears.
Format Disc
Select mode
Video Mode
VR Mode
Video Rec Audio
cast is
7Useb/BtoselectadesiredMode
Video Mode) then press
(VR Mode
back the disc.
8
When DVD
recording in Video mode and if the broadbilingual, the recorder records left audio (Main
language) or right audio (Bilingual language). It prevent
to listen to both language simultaneously during play-
or
ENTER.
Confirm message will appear.
Use b / B to select "OK" then press ENTER.
It takes a few moments to initialize the disc.
Caution
If you want to change the disc format,
recorded on the disc will be erased.
Rec Mode
Rec
Aspect
Auto
Chapter
DV Rec Audio
Video Rec Audio
Left
Right
28
9
Press SETUP to exit the
menu.
everything
Before
Operation (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
can
MENU/LIST
or
TITLE.
Use this to enter
a name
for the disc. This
name
appears when you load the disc and when you
disc information on-screen.
?
The disc
?
For discs formatted
see
only
display
be up to 32 characters long.
on a different recorder, you will
limited character set.
name can
a
Disc Format
Caution
Finalize
Once
?
edit
you've
or
finalized
record
a
disc
else
anything
you can't
that disc.
recording,
on
Edit
Disc Label
Disc Protect
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Disc Protect
1
2
1
2
3
4
Follow
steps 1-3
as
shown
on
page 28
(Disc
Format).
Use v / V to select the Finalize
Press B to
Finalize is
move
Follow
steps 1-3
shown Disc Format
Use v / V to select the Disc Label
Press B to
move
Edit icon is
highlighted.
3
4 Keyboard
on
page
option.
to the third level.
Press ENTER.
option.
to the third level.
menu
appears.
DVD-VR
highlighted.
Alphabet Capital
Press ENTER.
Finalize
menu
appears.
Finalize
123456789
0
ABCDEFGH
J
OK
UVWXYZ
Cancel
Space
Select OK then press ENTER.
The recorder starts
finalizing
long
on
select
finalization takes
on
on the type of disc,
disc, and the number of
depends
the
the disc. A disc recorded
can
take up to 3-4
minutes to finalize.
21
6
7
Cancel
a
ENTER to confirm
character then
shown
as
on
page
(Station Rename).
Choose OK then press ENTER to fix the
and return to the
Setup
Press SETUP to exit the
name
menu.
menu.
Disc Protect
ip
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
Finalize
OK
your selection. Refer step 3
how much is recorded
titles
Delete
5Enteranameforthedisc.Useb/B/v/Vto
press
the disc.
ote
How
I
KLMNOPQRST
Do you want finalization?
5
as
28.
menu.
After
record onto the disc.
doing this,
you
can
edit and
re-
When
recording in VR mode, set to ON
recording, editing or deleting
accidental
If you need to unlock the disc to make
to
prevent
of the disc loaded.
edits, select OFF.
Disc Format
Finalize
Disc Label
Disc Protect
OFF
ON
29
PREATION
Before
Using
Operation
the Home Menu
From the Home Menu
screen
you
Media
1
display
for
all the
playback
?
and
the Home Menu screen.
2Usethev/V/b/BandENTERbuttonsto
option
select the
3
you want.
Returns to live TV
viewing
for HDD record-
TV
(DVD):
Returns to live TV
viewing
for DVD record-
?
TITLE LIST:
?
MUSIC:
?
PHOTO:
?
MOVIE:
Displays
Displays
Displays
Plays
the Tile List
Music
Photo
menu.
(or Audio CD)
menu.
menu.
back the movie of the DVD and Video
CD.
VR
MEDIA
(HDD):
ing.
To exit the HOME menu, press HOME.
HDD
TV
ing.
can access
(HDD, DISC, MEMORY CARD)
recording of the recorder.
Press HOME to
?
DVD
Video
MEDIA
HOME
VCD
MEDIA
HOME
HOME
HDD
TV
DISC
TITLE LIST
DISC
TV(DVD)
DISC
TV(HDD)
MEMORY CARD
MUSIC
MEMORY CARD
TITLE LIST
MEMORY CARD
MOVIE
(HDD)
HDD
HDD
PHOTO
MP3
CD
JPEG
M/C
MEDIA
MEDIA
MEDIA
HOME
HOME
HOME
HDD
HDD
DISC
TV(HDD)
DISC
TV(HDD)
DISC
TV(HDD)
MEMORY CARD
MUSIC
MEMORY CARD
MUSIC
MEMORY CARD
MUSIC
HDD
PHOTO
30
PHOTO
Before
Operation
General
Explanation
On-Screen Display
This manual
of
or
is not available
on
the disc.
Information While
Displaying
various information about the disc
on-screen
on-screen.
basic instructions for
recorder. Some DVDs
recorder
Disc Information
display
can
loaded
operating the
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the
gives
Displaying
You
Watching
TV
During viewing the TV, press ENTER or DISPLAY
display/remove the information displayed
1
2
Press DISPLAY
information
To
the
the on-screen display, press
repeatedly until it disappears.
See the descriptions on next pages for detailed
explanation during playing a disc.
remove
DISPLAY
Temporary
Feedback Field Icons
to
Resume
Action
on-screen.
repeatedly to display/change
displayed on-screen.
play
from this
prohibited
or
point
not available
e.g., when DVD-RW in VR mode is inserted.
otes
Indicates channel
number, station name, and
audio signal (NICAM, STEREO, MONO)
received
Indicates
by
the tuner.
Some discs may not
provide all of the features on the
display example shown on next pages.
If no button is pressed for 5 seconds, the on-screen
display disappears.
on-screen
operational mode of the recorder.
(HDD, DVD, VCD, etc.)
Indicates the record
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
DVD-VR
DVD
VR Mode
SQ
1h 32min Free
PR-06
N STEREO
ABC
28/8/2004 11:35
Indicates current date and time.
31
PREATION
Before
Operation
Disc Information
Displaying
on-screen
HDD
(Continued)
Shows the
recording date,
recording channel,
recording mode, etc.
Menu
elapsed playing
time
and total time.
Shows the title name,
HDD
Title 1
media and
16/11/04
PR-01
0:06:32
HQ
/
2:12:10
Title Number
1/6
Time
0:10:30
Selection Method
Shows the current title number and total number of titles
and skip to the desired title number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
Audio Channel
Stereo
playback
mode.
Function (Use v / V to select desired option)
Options
Shows the current
point by
the
elapsed
time
directly.
Shows the audio channel, and
changes
Shows the
DVD
b/B
the audio channel.
elapsed playing
time
and total time.
Shows the current
number
title/chapter
DVD
TITLE: 1/4
and total number of
CHAPTER: 3/28
0:06:32
/
media and
2:12:10
Shows the current title number and total number of
1/6
Number
4/26
Time search
0:10:30
Audio
language
Digital Audio
Output mode
1.
and
Subtitle
Selection Method
Function (Use v / V to select desired option)
Options
Title Number
Chapter
language
ENG
D 5.1CH
titles, and skips
Angle
OFF
1/3
Sound
3D SUR.
to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
ABC
playback
mode.
titles/chapters.
Menu
Shows the current
the
b/B
setting.
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
b/B
Shows the current sound mode, and
changes
the
Shows the
VCD
b/B
setting.
elapsed playing
time
and total time.
Shows the current
track number and total
number of
tracks,
or
VCD
TRACK
:
0:06:32
/
1:00:00
shows PBC On mode.
Menu
Function (Use v / V to select desired option)
Options
Track Number
1/4
Time
Audio Channel
0:10:30
Stereo
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only).
Shows the audio channel, and
changes
Sound
32
3D SUR.
the audio channel.
Shows the current sound mode, and
changes
Shows the current
media and
1/17
the
setting.
playback
mode.
Selection Method
b/B,or
Numbers, ENTER
--
b/B
b/B
Before
Operation
Displaying
Disc Information
on-screen
(Continued)
Shows the
VR
elapsed playing
time
and total time.
Shows the title name,
Menu
0:06:32
SQ
/
2:12:10
Number
4/26
Time search
0:10:30
Digital Audio
Output mode
D 2CH
language
OFF
ABC
Sound
3D SUR.
titles, and skips
playback
mode.
Selection Method
Shows the current title number and total number of
1/6
Subtitle
ORG
Function (Use v / V to select desired option)
Title Number
Shows the current
media and
20/08/04
Options
Chapter
DVD
TITLE
recording date,
recording mode, etc.
ORG: Original
PList: Playlist
to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
b/B
Shows the current subtitles language, and
changes
the
b/B
setting.
Shows the current sound mode, and
changes
the
Shows the
Video
b/B
setting.
elapsed playing
time
and total time.
Shows the title name,
Shows the current
Menu
20/08/04
Number
4/26
Time search
0:10:30
Digital Audio
Output mode
1.D
language
ABC
Angle
/
2:12:10
2CH
OFF
1/1
Sound
3D SUR.
titles, and skips
media and
playback
mode.
Shows the current title number and total number of
1/6
Subtitle
0:06:32
SQ
Function (Use v / V to select desired option)
Options
Title Number
Chapter
DVD
TITLE
recording date,
recording mode, etc.
to the desired title number.
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
Shows the current subtitles language, and
changes
the
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
setting.
b/B
b/B
b/B
b/B
33
PREATION
with
Operation
Playing
HDD, DVD and Video CD
HDD, DVD,
a
Video CD
or
HDD
Playback Setup
Turn the TV
on
When
and select the video
input
source
the
1
source
Choose
HOME
and select
on
(HDD or DVD)
(see page 30).
to
button
play using
DVD
your
2 playback
3
Press OPEN/CLOSE
READING appears
starts
playback
start, press N
In
some
cases,
(Z)
to close the
tray.
When
the
The
is
may be displayed first after
Video CD which contains a menu.
DVD
or
loading
to
use
v / V to select the
or
b / B to select
a
title number.
to another CHAPTER/TRACK
title
VR
VCD
1/4
on a
disc has
more
than
one
chapter/track,
chapter/track or to return to the
chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
beginning
of the current
press DISPLAY twice. Then, use v / V to select
icon (or for a Video CD, select track icon).
Then, enter the chapter/track number using the
displayed
menu screen
can move
Then, press the appropriate numbered
Video
a
title, you
select the next
ip
a menu screen
one
you can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
instead.
If
than
more
follows:
4/26
display window, and
automatically. If playback does not
(PLAY).
the disc menu might appear
on
as
(0-9)
Moving
chosen disc in the tray, with the
side down.
Load
disc has
title icon.
connected to the recorder.
media
a
menu.
a
1/6
VR
Video
Press DISPLAY twice then
system: Turn the audio system
input
DVD
another title
connected to the recorder.
Audio
to another TITLE
Moving
chapter
a
numbered buttons
(0-9)
or
press b / B.
DVD
Use the b / B / v / V buttons to select the
title/chapter
you want to view, then press ENTER to start playback.
Press TITLE or MENU/LIST to return to the menu
Search
HDD
1 Press SCAN
screen.
DVD
(m
The recorder will
VCD
M) during playback.
or
now
VR
Video
go into SEARCH mode.
2 Press SCAN
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
Menu
setting
(O)
to return to the
menu screen.
and the exact
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
using
menu screen.
You may also set PBC to OFF under
See page 23.
Setup
3
menu.
(m or M) to select the required
(Reverse play), mX2, mX4, mX8,
mX16, mX100 (backward) or MX2, MX4,
MX8, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To exit SEARCH mode, press N (PLAY).
speed:
b
Still Picture and
otes
--
HDD
Frame-by-Frame Playback
VR
Video
VCD
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Rating",
--
DVD
(see
page 26).
DVDs may have a Region Code.
Your recorder will not play discs that have
on
code different from your recorder. The
this recorder is 2 (two).
1 Press PAUSE/STEP
The recorder will
2 You
can
frame
a region
region code
(X) during playback.
go into PAUSE mode.
back up the picture frame-by-
now
advance
by pressing
or
b / B
repeatedly during
PAUSE
mode.
for
3 To exit PAUSE
mode, press N (PLAY).
ote
The
General Features
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
34
in
reverse
is not available
ip
ote
Unless stated
picture frame-by-frame
for Video CD.
use
You
can
pressing
control.
advance the
picture frame-by-frame by
(X) repeatedly on the remote
PAUSE/STEP
HDD, DVD and Video CD (Continued)
with
Operation
General Features
Video CDs
(Continued)
Slow Motion
HDD
DVD
VR
Video
1 Press PAUSE/STEP
The recorder will
2 Press SCAN
ALL:
?
OFF: does not
a
repeat mode.
on
the disc.
play repeatedly.
Video CD with
Setup
to select the
M)
or
required
mode, press N (PLAY).
menu
in
reverse
is not
possible
must set PBC to OFF in the
PBC, you
the
use
function. See page 23.
Repeat
A-B
Repeat
HDD
to
DVD
VR
Video
VCD
A-B
To
repeat
a
sequence in
a
title:
1 Press A-B at your chosen
ote
playback
desired
repeats
repeats the all tracks
Repeat
Slow motion
a
the current track.
ote
t
4 To exit Slow Motion
?
On
PAUSE mode.
M) during
or
(m
TRACK:
go into PAUSE mode.
1/16, t 1/8, t 1/4, or t 1/2 (backward),
or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/16,
T 1/8, T 1/4 or T 1/2 (forward).
speed:
?
VCD
The recorder will enter SLOW mode.
3 Use the SCAN
Track/All/Off
Repeat
(X) during playback.
now
(m
-
Press REPEAT to select
icon and 'A-' appears
starting point.
on
the TV
screen.
2 Press A-B
with
Repeat
Video CDs.
again at your chosen end point.
icon and 'A-B' appears on the TV screen, and the
repeat sequence begins.
Random
Karaoke DVD
3 To cancel the sequence, press A-B
select OFF.
VCD
repeatedly
to
1 Press RANDOM
The unit
during playback.
automatically begins Random Playback
"RANDOM" appears
2 To return to normal
and
Time Search
screen.
on
Random
during
(track)
and
playback,
resumes
the
Random
display
appears
ote
works with DVD Karaoke discs
or
Setup
menu
PBC, you
to
use
must set PBC to OFF
the Random function. See
the
HDD
DVD
VR
Video
VCD
required
on-screen
screen.
elapsed playing
time of the
use
v / V to select the Time
on-screen
display.
can
use
the number buttons to enter
start time. Enter
not enter
right
an
hours, minutes, and
sec-
in the box.
invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
numbers.
4 Within 5
CHAPTER
seconds,
onds from left to
You
page 23.
Repeat
The
at
The "0:00:00" appears in the Time Search box.
3 Within 5
video CDs without PBC.
in the
seconds,
Search icon in the
Video CD with
during playback.
the TV
The Time Search box shows the
2 Within 5
a
on
playing
current disc.
playback.
only
VR
Video
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY twice
SKIP >
This function
DVD
0:10:30
press RANDOM until
the TV screen.
unit selects another title
On
HDD
playback,
"NORMAL" appears
ip
By pressing
the TV
on
seconds, press ENTER
to confirm the start
time.
HDD
-
Repeat
Title/Off
Press REPEAT to select
?
?
TITLE:
repeats the
OFF: does not
DVD Discs
-
?
?
repeat
starts from the selected time
on
the disc.
mode.
.
play repeatedly.
Repeat Chapter/Title/All/Off
CHAPTER:
a
desired
repeat mode.
the current
repeats
chapter.
repeats the current title
ALL: repeats the all titles on the disc.
TITLE:
(VR
?
desired
current title
Press REPEAT to select
?
Playback
a
.
mode DVD-RW disc
OFF: does not
only)
play repeatedly.
35
PLAYBCK
with
Operation
HDD, DVD and Video CD (Continued)
General Features
Discs: Menus
Zoom
HDD
DVD
VR
Video
VCD
DVDs may contain menus that allow you to access
features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
special
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
during playback
still
or
playback
to acti-
vate the Zoom function.
Each press of the ZOOM button changes the TV screen in
the sequence shown below.
x1 size → x2 size → x4 size → x1 size (normal size)
2Usetheb/B/v/Vbuttonstomovethroughthe
zoomed picture.
3 To
resume
ZOOM
normal
repeatedly
playback, press CLEAR or press
until the normal picture appears.
ote
The
the Contents of DVD Video
Checking
(continued)
function may not work for
zoom
some
toselectanoption.Or,usetheb/B/v/Vbuttonsto
highlight your selection, then press ENTER.
DVD
Title Menu
1 Press TITLE.
If the current title has
TV
screen.
menu, the
menu may contain camera
guage and subtitle options, and
will appear on the
may not appear.
menu
menu
2 The
angles, spoken lanchapters for the title.
DVD
Disc Menu
DVDs.
a
Otherwise, the disc
1 Press MENU/LIST.
Marker Search for disc
DVD
To enter
You
can
To enter
VR
Video
start
a
VCD
playback
menu
remove
Camera
1/6
Marker
a
The disc
2 To
from up to six memorized
at the desired
marker, press MARKER
the disc. The Marker icon appears on the TV
briefly. Repeat to enter up to six markers.
on
points.
point
screen
is
displayed.
the disc menu, press MENU/LIST
DVD
Angle
If the disc contains
1/3
recorded at different
scenes
angles, you can change
during playback.
to
again.
a
different
camera
angle
camera
Press ANGLE then press b / B repeatedly
to select a desired angle.
during
playback
To Recall
or
1.
During
disc
search
menu
2.
Clear
The number of the current
Marked Scene
playback,
appears
press SEARCH. The marker
on the screen.
Useb/B/v/Vtoselectamarkedscenethatyou
want to recall
3.
a
or
clear.
Press ENTER and
scene.
playback
starts from the marked
Or, press CLEAR and the marked
erased from the marker search
scene
is
menu.
Marker Search
angle
appears
the TV
on
screen.
ip
The ANGLE indicator will blink
recorded at different
angles
the TV
on
screen
to indicate that
at
scenes
angle switching
is
possible.
Changing
the Audio Soundtrack
1.
DVD
ENG
D 5.1CH
Press AUDIO then press b / B repeatedly during playa different audio language or audio sound-
back to hear
track if available.
ote
Some discs feature both
tracks. There is
Move
Select
CLEAR Delete
Close
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
recorder to
a
puts. See page
Marker Search for HDD
HDD
00:05:29
HDD title playback, you
Press MARKER at the desired
During
mark
only one.
point during playback.
can
Press SEARCH to recall the marked
36
scene.
soundtrack,
DTS decoder via
one
of the
17 for connection details.
connect this
digital
out-
Operation
the Audio Channel
Changing
HDD
With
Video CD and
Last Condition
DVD
Stereo
VR
VCD
a
HDD, DVD and Video CD (Continued)
with
HDD, press AUDIO then press
B
to hear
repeatedly during playback
channel (STEREO, LEFT or RIGHT).
a
b /
different audio
With DVD-RW discs recorded in VR mode and HDD
that have both
you
can
(L+R),
a
main and
a
Bilingual audio channel,
(L), Sub (R), Main+sub
switch among Main
Mono by pressing AUDIO.
Memory
VR
Video
This recorder memorizes the
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or switch
off the recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
or
otes
3D Surround
--
--
DVD
VR
Video
This unit
can
produce
3D SUR.
VCD
a
3D Surround
Settings are stored in memory for use any time.
This recorder does not memorize settings of a disc if
you switch off the recorder before
play it.
effect, which
playback from two
speakers, instead of the five or
speakers normally required to listen to multi-
commencing
to
simulates multi-channel audio
conventional stereo
more
channel audio from
a
home theater
Subtitles
DVD
(Picture
HDD
system.
1 Press 3D SURR. then press b / B
playback to select "3D SUR.".
2 To turn off the 3D Surround
PIP
repeatedly during
DVD
in
Picture)
VR
Video
VCD
This function enables you to view the stored stations in
sub picture during playback.
effect, select "NORMAL".
VR
Video
OFF
ABC
Press SUBTITLE then press b / B repeatedly during
to see the different subtitle languages.
playback
Instant
HDD
Skip
Each press I.SKIP
skips
DVD
VR
Video
forward 15 seconds.
ote
If
appears, the feature is not available
on
the disc.
On and off
Press PIP to switch
Finding
Locations
on a
Disc
VCD
ton
You
can directly access any point on a video CD using
this function. Use this function only while a video CD is
playing. Playback jumps
1 Press SEARCH
to the
point specified.
during playback.
The progress bar appears
on
the TV
33%
33%
2 Use b / B to find
a
start
position
for
playback.
3 Press ENTER to confirm the selected
Playback
starts from the selected
the sub
picture,
press this but-
mode selection for sub
picture
input mode for the sub picture.
Each time this button is pressed, each input mode for
the sub picture is displayed as shown below.
Press AV to select the
Program
selection for sub
Use v / V to
TRK 1
on
to switch it off.
Tuner→AV1→AV2→AV3→AV4
screen.
PBC
Input
again
position.
position.
picture
the program when sub picture's
input is set to tuner. The selected program number is
displayed on the TV screen. You can view the selected program
change
by pressing
STOP
(x).
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
ote
This function works
only
when
no
marker is memorized.
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
37
PLAYBCK
Audio CD and MP3
Playing
Audio CD
an
MP3
CD
The recorder
Operation
HDD
can
MP3 file
or
M/C
play
audio CDs and MP3 files
HDD, Memory Card, CD-ROM,
Before playing MP3 files, read "Notes
or
on
on
Add
playback
the selected
Prog. Add: Adds the track(s)
Program List. (page 41)
MP3
Music
Press HOME.
The HOME
to
MP3
or
Play:
Play
audio title
option then press ENTER.
The Audio CD or Music menu appears on the TV
Prog.
playback
the selected
Copy: Copies the track(s)
media. (page 39)
Add
to another
Prog. Add: Adds the track(s)
Program List. (page 41)
screen.
Audio CD
Start
title.
Copy
ENTER.
Select 'MUSIC'
MP3
options
menu
menu
a
to
Music
Track List
0:52:16
Duration
TRACK 1
04:47
TRACK 2
04:01
TRACK 3
03:01
TRACK 4
03:30
TRACK 5
04:24
TRACK 6
05:01
TRACK 7
03:48
TRACK 8
04:09
TRACK 9
05:10
TRACK 10
04:11
Enter
MARKER Select LIST
FOLDER 01
HDD
Use v/V to select
Playback starts.
During playback,
time will appear
FILE 6
FILE 7
Play:
Play
FILE 8
FILE 9
New Folder
MARKER Select
LIST
track then press N
the front
stop
Prog.List
Delete
Close
playback
Delete: Deletes the
the selected
(PLAY).
Prog.
Edit: Selects Edit
Add
?
at the end of the disc.
ID3-Tag
information is not
options.
Rename: Edits the file
name.
Move: Moves the
file(s) to
(page 39)
Copy: Copies the file(s) to
folder or media. (page 39)
folder
ips
the MP3 file. If
from the
(page 39)
elapsed playing
panel display and
Press DISPLAY to view
file(s)
media.
Edit
?
ID3-Tag
Start
title.
the current track's
will
M/C
FILE 10
Enter
Music Menu
a
HDD
options
menu
FILE 5
?
on
Playback
menu.
Music
FILE 4
Close
Prog.List
FILE 2
FILE 3
Audio CD Menu
4
Start
page 8.
on
1
appears.
Select
media that contains
2 then press
3
Play:
title.
Prog.
CD-RW discs.
CD
options
menu
Play
CD-R
Recordings"
Audio CD
information for
or
Prog. Add: Adds the track(s)
Program List. (page 41)
present,
folder, the
another
media.
another
to
"not check" will appear. If you select a
number of subfolders and number of MP3 files in
the folder
remove
are
displayed.
the information
If you want to
move
Press DISPLAY
again
sccreen.
to the upper
directory,
use
the v / V to
You
can
another
and press ENTER.
highlight
display HOME menu to select
media by pressing RETURN (O).
to
Erasing
MP3
the HDD
1.
also
Select
or
an
file(s)
or
folder(s) from
Memory Card
MP3 file you wish to
HDD
erase on
M/C
the Music
menu.
ip
5
To
stop playback
at any
2.
create
new
the Music-HDD
folder. Select 'New Folder'
or
Music-Memory
Card
option
menu
press ENTER. "NONAME##" folder is created.
38
tracks.
menu
options
appear
on
the left side of the
menu.
ip
can
multiple
Press ENTER.
The
You
on
Use the MARKER button to select
time, press STOP.
then
3.
Select 'Delete'
The selected
Card.
option then press ENTER.
file(s) is deleted from HDD or Memory
Audio CD and MP3
HDD
MP3 files
Moving
Operation (Continued)
Copy
M/C
Select the media
HDD
You can move MP3 files to another folder or
media. After moving, the files are deleted from the
Copy
MEMORY CARD
Cancel
current location.
New Album
1Usev/VtoselectanMP3fileorfolderonthe
Music
PLAYBCK
menu.
Selecting multiple
tracks
(folders)
Press MARKER.
1.
A check mark appears on the track. Press MARKER
again to cancel the marked track or folder.
Use the MARKER button
marked track
2.
Repeat step
or
again
to cancel the
folder.
The
options
1 to mark additional tracks
Move
ip
You
appear
on
The
(folders).
the left side of the
option
menu.
select
a album (folder) to copy.
selecting a media then press ENTER.
album (folder) list appears.
Select
You
a
folder.
can
create
Album'
option
new
on
album
(folder).
the Move
menu
Select 'New
then press
ENTER.
then
"NONAME##" folder is created.
ENTER.
menu
can
After
2.
Use v / V to select the "Move"
3 press
is
1.
Press ENTER.
2
3Usev/VtoselectamediathenpressB.
Copy option
highlighted.
will appear.
4
Move
Select the media
HDD
When
to
'Copy' option
begin copying.
is
ENTER
highlighted, press
Move
MEMORY CARD
Cancel
Naming
MP3 File
an
HDD
M/C
New Album
You
can name
MP3 files
up to 32 characters
1
Move
is
You
1.
can
a album (folder) to move.
selecting a media then press ENTER.
album (folder) list appears.
be
can
options
on
appear
name on
the Music
the left side of the
Use v/V to select 'Rename'
option
then press
ENTER.
Keyboard
menu
appears.
After
The
2.
select
menu
Names
menu.
2
ip
Choose the file you want to
menu, then press ENTER.
The
4Usev/VtoselectamediathenpressB.
option
highlighted.
independently.
long.
Select
You
a
folder.
can
create
new
album
(folder).
ABC
Alphabet Capital
Select 'New
123456789
0
ENTER.
ABCDEFGH
J
"NONAME##" folder is created.
KLMNOPQRST
Album'
option
on
the Move
menu
then press
I
UVWXYZ
5
When 'Move'
ENTER to
MP3 files to another media
Copying
1
2
Follow
option is highlighted, press
begin moving.
steps 1-2
as
shown left
(Moving
MP3
files).
Use
v
/ V to
highlight 'Copy' option
menu
will appear.
then press
Delete
OK
Cancel
3Enteranameforthefile.Useb/B/v/Vto
press
select
a
character then
your selection. Refer step 3
21
ENTER.
Copy
Space
ENTER to confirm
as
shown
on
page
(Station Rename).
Choose OK then press ENTER to fix the name
returns to the previous menu screen.
4 and
39
Audio CD and MP3
Pause
3D Surround
MP3
CD
1 Press PAUSE/STEP
2 To return to
Operation (Continued)
This unit
(X) during playback.
playback, press
(X) again.
N
(PLAY)
or
press
PAUSE/STEP
Moving
to Another Track
Press SKIP .
>
or
MP3
CD
playback to go to the next track
beginning of the current track.
or
Press SKIP . twice
step back
to
to return to the
to the pre-
On
an
Audio
CD,
track number
directly to any track, enter the
the numbered buttons (0-9) dur-
using
Audio CDs
-
Repeat
?
TRACK:
?
ALL:
?
OFF: does not
-
Track/All/Off
?
?
channel audio from
repeat
desired
(stereo,
repeatedly
or right).
(m
menu screen.
mode.
MP3
repeat
during playback or in stop mode.
automatically begins Random Playback and
on
the
menu screen.
Repeat
a
CD
sequence in
a
track:
playback, press RANDOM repeatdisappears from the menu
until "RANDOM"
SKIP >
during
Random
playback,
the
resumes
Random
play-
Repeat
and the
again
on
the
point.
menu screen.
at your chosen end point.
B' appears on the menu screen,
icon and 'A
-
repeat sequence begins.
3 To exit the sequence and return to normal
A-B again.
The
unit selects another track and
icon and 'A' appears
2 Press A-B
The
screen.
40
A-B
mode, press N (PLAY).
1 Press A-B at your chosen start
1 Press RANDOM
back.
M) during playback.
go into SEARCH mode.
(m or M) to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
Search speed and direction are indicated on the
play repeatedly.
"RANDOM" appears
different audio chan-
2 Press SCAN
To
ip
By pressing
or
now
Repeat
edly
a
CD
OFF: does not
2 To return to normal
to hear
left
3 To exit SEARCH
The unit
effect, press 3D SURR.
from the menu screen.
MP3
CD
Press AUDIO
repeat
repeats the current track.
FOLDER: repeats the all tracks in the current folder.
CD
system.
to select "3D SUR".
during playback
disappears
TRACK:
Random
home theater
the Audio Channel
Changing
The recorder will
Track/Folder/Off
a
a
or
2 To turn off the 3D Surround
1 Press SCAN
mode.
play repeatedly.
Press REPEAT to select
?
desired
a
repeats the current track.
repeats the all tracks on the disc.
Repeat
speakers, instead of the
speakers normally required to listen to
Search
MP3
Press REPEAT to select
MP3
five
multi-
nel
CD
Repeat
from two
more
to go
ing playback.
effect, which
playback
conventional stereo
until "3D SUR"
vious track.
3D Surround
a
simulates multi-channel audio
1 Press 3D SURR.
briefly during
briefly
produce
can
MP3
CD
Repeat
icon
disappears
from the
play,
menu screen.
press
with Audio CD and MP3
Program Playback
Program Playback enables you to make custom
playlists of Audio CD or MP3 tracks. Programs can
tain up to 99 Audio CD tracks
con-
256 MP3 tracks.
or
1Usev/Vtoselectatrack(orfolder)onthe
Audio
Music
CD
or
Selecting multiple
Play: Playback begins in the order
in which you programmed the tracks
Delete
from the selected track.
Save
(folders)
List
Program
from
track(s)
menu.
Move: Moves the
to
track(s)
change
the program order.
A check mark appears on the track. Press MARKER
again to cancel the marked track or folder.
Save: Memorizes the program list.
Use the MARKER button
marked track
2.
Repeat step
or
again
(HDD only)
to cancel the
folder.
1 to mark additional tracks
Repeat Programmed
(folders).
options
appear
on
the left side of the
Add"
"Prog.
then
option
-
Erasing
1-3 to mark additional tracks.
TRACK 5
TRACK 5
TRACK 2
TRACK 2
HDD
5/12
TRACK 3
TRACK 8
9/152
0:00:42
TRACK 4
TRACK 4
02:13
FILE 2
FILE 2
FILE 3
FILE 6
FILE 4
FILE 9
TRACK 5
FILE 5
TRACK 6
FILE 6
TRACK 7
FILE 7
TRACK 8
Use the MARKER button to select
multiple
MARKER Select LIST
Use B to
Close
Prog.List
move
to the
The
programmed track
lighted on the program
Press N
(PLAY)
Playback stops
Changing
FILE 10
Enter
Program
MARKER Select
LIST
select
a
high-
The
and
on
programmed
resume
menu
options
appear
normal
the List and press
A
yellow
Program
List
screen
by
MENU/LIST.
menu
To
Program
the left side of the
move
the
options
display menu options, select a tack on the
Program List menu then press ENTER.
The menu options appear on the left side of the menu.
Use v / V to select an option then press ENTER to
yellow
bar to the desired loca-
tion, then press ENTER.
The selected track is moved.
ip
Use MARKER to
move
Program
multiple
List
This recorder memorizes the
have
tracks.
HDD
user
program list that you
programmed.
1 Select
List
List
option then press ENTER.
bar appears in the Program List.
Save Your
ip
the
on
the
2 Select 'Move'
(PLAY).
can access or remove
Program
move on
menu.
3 Use v / V to
the last
playing
track
Track Order in the
1 Select the track you wish to
List then press ENTER.
to start.
after
To exit
Program
the left side of the
Close
Prog.List
list.
you selected last is
list.
8 playback,Program Playback
pressing
on
appear
Select 'Delete' option then press ENTER.
The selected track is deleted from the Program List.
3.
track in the program list.
You
options
menu.
Use v / V to select the track you want to start
N
menu
List
6 playing.
7
tracks.
Press ENTER.
2.
FILE 9
New Folder
TRACK 10
Enter
Program
FILE 8
TRACK 9
5
FILE 4
List
from the
The
Program
FILE 1
Program
ip
FILE 9
Music
List
Program
TRACK 1
Track from the
erase
ote
Track List
a
Select the track you wish to
List.
1.
If you select a folder for Programmed Playback, all
tracks in the folder are added to the Program List.
Audio CD
mode.
Repeats the current track.
ALL: Repeats all tracks on the Program List.
OFF: Cancels Repeat mode (no display).
ENTER.
Repeat steps
4
menu.
-
Use v / V to select the
3 press
Repeat
TRACK:
-
The
Tracks
Press REPEAT to select the desired
Press ENTER.
2
2.
the
Press MARKER.
1.
1.
Delete: Deletes the
Move
menu.
tracks
Play
a
track
on
the
Program
List then press
ENTER.
The
menu
options
2 Select 'Save'
The
Program
appear
on
the left side of the
menu.
option then press ENTER.
List is saved in the HDD's program folder.
confirm your selection.
41
PLAYBCK
JPEG File
JPEG File
Viewing
a
The recorder
can
HDD,
ings,
1
or
Operation
Memory
read "Notes
play
JPEG files
on
the
Select
2 press
Select
3
a
at any
stop viewing
The Photo
menu
time, press STOP.
appears.
CD-R, CD-RW,
Card. Before
JPEG
on
playing JPEG recordRecordings" on page 8.
Press HOME.
The HOME
To
8
ip
You
menu
appears.
create
can
new
the Photo-HDD
on
folder. Select 'New Album'
option
menu
then
press ENTER. "NONAME##" folder is created.
media that contains JPEG file then
ENTER.
'PHOTO'
The Photo
then press ENTER.
appears on the TV screen.
option
menu
Photo
options
menu
file
Photo
Delete
HDD
JPEG
Folder 03
Folder 04
Folder 05
Folder 06
Folder 07
Folder 08
full
as
screen.
from the media.
Card
Edit
Enter
MARKER Select
Rename
Edit: Selects Edit
Move
?
Copy
ENTER.
menu
options
appear
on
Displays
Slide Show
menu.
Close
4Useb/B/v/Vtoselectafolder,thenpress
(HDD, Memory
only)
Slide Show:
New Album
M/C
Delete: Deletes the selected file
Slide Show
Folder 02
Folder 01
HDD
JPEG
Full Screen: Shows the selected
Full Screen
The
Card
Photo-Memory
or
options.
Rename: Edits the file
name.
(page 43) (HDD, Memory
only)
the left side of the
?
menu.
Card
Move: Moves the
file(s) to another
(album) or media. (page 44)
(HDD, Memory Card only)
folder
5
Select
'Open' option
then press ENTER.
A list of files in the selected folder appears.
?
JPEG
Copy: Copies
folder
Photo
or
the
media.
file(s) to
(page 44)
another
HDD
Skip Images
While
viewing
a
picture,
press SKIP
to advance to the next file
or
(.or >) once
previous file.
return to the
New Album
Enter
MARKER Select
Close
6Useb/B/v/Vtoselectafile,thenpress
ENTER.
The
menu
options
appear
on
Rotate
clockwise
or
viewing
a
picture
to
flip
the
picture
counterclockwise.
the left side of the
Erasing JPEG file(s) or folder(s)
the HDD or Memory Card HDD
menu.
ips
If you want to
move to the upper directory, use the
and press ENTER.
highlight
You can also display HOME menu to select another
media by pressing RETURN (O).
1.
v / V to
7
Images
Use v / V while
Use v / V to select "Full Screen" then press
ENTER.
Select
an
JPEG file you wish to
erase on
from
M/C
the Photo
menu.
ip
Use the MARKER button to select
2.
multiple
tracks.
Press ENTER.
The
menu
options
appear
on
the left side of the
menu.
3.
Select 'Delete'
The selected
Card.
File
03.jpg
4/20
90
90
Press ENTER to appear
42
Prev
or
Next
Stop
disappear
Hide
this
menu.
option then press ENTER.
file(s) is deleted from HDD or Memory
JPEG File
Operation (Continued)
View Slide Shows
1. Select Slide Show
Use b / B / v / V to
4.
option
on
the Photo
menu
options.
2. Press ENTER.
Press STOP to
5.
the Photo
The Slide Show
menu
highlight
'Start'
option
then
press ENTER.
stop the Slide Show and
return to
menu.
appears.
Slide Show
Naming
Object
All
Speed
Normal
MP3 Simultaneous
Start
You
JPEG File
a
can name
independently.
Play
1
Cancel
JPEG files
Names
can
HDD
Memory
Card
be up to 32 characters
long.
on
the HDD
Choose the file you want to
menu, then press ENTER.
The
menu
options
M/C
appears
on
or
name on
the Photo
the left side of the
menu.
3.Useb/B/v/Vtosettheoptions.
2
Object:
Selected: Views slide show
-
only
selected files.
Use the MARKER button to select
multiple
Use v/V to select 'Rename'
Keyboard
menu
4. Select the "Start"
to
speed
Alphabet Capital
Slow, Normal, Fast.
then press ENTER to start
option
appears.
ABC
Speed:
Sets the Slide Show
then press
files.
All: Views slide show all files.
-
option
ENTER.
the Slide Show.
123456789
0
ABCDEFGH
J
I
KLMNOPQRST
5. Press STOP to
the Photo
stop the Slide Show and
returns to
UVWXYZ
menu.
To Pause the Slide Show
Space
1
Press PAUSE/STEP
2
When you want to continue slide
N (PLAY).
(X)
simultaneously
display photo
music files recorded
1.
Follow
steps
1-3
files while
on
listening
to MP3
HDD.
shown above
as
Cancel
3Enteranameforthefile.Useb/B/v/Vto
press
To listen to music while slide show
can
OK
show, press
select
You
Delete
to pause slide show.
(View
a
character then
your selection. Refer step 3
21 (Station Rename).
ENTER to confirm
as
shown
on
page
Choose OK then press ENTER to fix the name
returns to the previous menu screen.
4 and
Slide
Shows).
2.
Select "MP3 Simultaneous
Play" option
on
the Slide
Show menu, then press ENTER.
The menu appears as below.
MP3 Simultaneous
Select MP3 to
Play
play
File 1
Select All
File 2
Deselect All
File 3
Start
File 4
Cancel
File 5
File 6
File 7
File 8
3.
MARKER Select
Press MARKER to select
?
?
?
Select "Select All"
multiple tracks.
option to select all tracks
press ENTER.
Select "Deselect All"
option
then
to deselect all selected
tracks then press ENTER.
Select "Cancel" option to exit this
menu
then press
ENTER.
43
PLAYBCK
JPEG File
Operation (Continued)
Moving JPEG
HDD
files
M/C
8Usev/VtoselectamediathenpressB.
option
highlighted.
Move
You can move photo files to another folder or
media. After moving, the files are deleted from the
current location.
The HOME
3
a
ip
You
Press HOME.
1
Select
2 press
menu
appears.
select
can
2.
The album list appears.
Select a folder.
You
selecting
can
option
menu
then press ENTER.
appears on the TV screen.
a
create
on
to
move.
media then press ENTER.
new
the Move
album. Select 'New Album'
menu
then press ENTER.
"NONAME##" folder is created.
option
Photo
(folder)
After
media that contains JPEG file then
Select 'PHOTO'
album
a
1.
ENTER.
The Photo
is
When 'Move'
9
ENTER to
option is highlighted, press
begin moving.
HDD
Folder 01
Folder 02
Folder 03
Folder 04
Folder 05
Folder 06
Folder 07
Folder 08
JPEG
You
New Album
Enter
MARKER Select
JPEG files
Copying
can
photo
copy
4Usev/VtoselectanJPEGfilesoralbumson
the
then press
MARKER.
A check mark appears
on
the JPEG file
album.
or
1-6 as shown left
1 files). steps
Select
2 Copy 'Copy' option
appear.
on
JPEG
options.
Copy
marked track
or
again
Select the media
to cancel the
HDD
folder.
Press and hold V to
or
the
(Moving
will
menu
otes
Use the MARKER button
track
or
Close
Follow
menu
files to another folder
media.
Copy
MEMORY CARD
move
quickly
to the next
move
quickly
to the
Cancel
folder.
New Album
Press and hold v to
track
5
6
7
or
previous
folder.
Repeat step
4 to mark additional files
or
folders.
Press ENTER.
The
options
appear
Select 'Move'
Move
menu
on
option
the left side of the
on
the
menu.
3Usev/VtoselectamediathenpressB.
Copy option
highlighted.
is
options.
will appear.
ip
You
Move
(folder) to copy.
media then press ENTER.
The album list appears.
Select a folder.
You
Cancel
selecting
can
option
create
on
the
a
new
Copy
album. Select 'New Album'
menu
then press ENTER.
"NONAME##" folder is created.
New Album
4
44
album
2.
Select the media
MEMORY CARD
a
After
Move
HDD
select
can
1.
When
to
'Copy' option
begin copying.
is
highlighted, press
ENTER
Recording Overview
About DVD
Notes for
recording
?
The
recorder
otes
?
This
This recorder cannot make
recordings
on
CD-R
or
on
CD-RW discs.
?
?
Our company takes no responsibility for recording failure due to power cuts, defective discs, or damage to
the recorder.
?
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
Disc types and
and
?
of your discs.
care
recording formats, modes,
?
?
This recorder
can
three different kinds of DVD disc:
pre-recorded
DVD-Video
play
discs, DVD-RW and DVD-R
discs. The disc format for DVD-R discs is
format"---the
This
in
a
means
regular
same as
that
DVD
once
always
"Video
pre-recorded
DVD-Video discs.
finalized, you
can
play
a
?
DVD-R
required. (Reinitializing
of the disc.)
the disc will
The
closely
erase
?
recording
related to the disc for-
Recording format, then
mode; if the disc format is
being recorded.
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
recording
exactly
When
using
on
The Erase Title
hides the
option
able
(except
disc in Video
record,
erase
capacity
for the last recorded title
store many hours of video
on
it,
even
in the
one
for camcorder
DVD-RW
mode).
record either NICAM
is set to
or
regular
audio.
Auto, then if the
NICAM, you can record the NICAM audio.
non-NICAM, the regular audio is
If the broadcast is
There
?
HQ
?
SQ
recorded.
are
?
four
time and
picture quality
preset recording quality modes:
Highest quality setting, gives
recording time on a DVD disc.
--
--
gives
higher qual-
ity recording modes. To help you organize the contents,
the HDD is divided into ten groups. You can name and
use these groups as you like---for example, you might
have a group for movies, another for TV shows, and
on a
TV audio channels
Recording
and re-record as many times as you like.
of the hard disk drive means that you can
the last
List-Original menu
actually erase the title
the recording time avail-
always
The
erase
not
will take up
broadcast is
mode, recording
in the Title
title, it does
can
Recording to the internal hard disk drive (HDD) is basically similar to recording to a VR mode DVD-RW disc.
You have the full choice of recording quality options,
including the manual mode, and of course you can
remaining
length of the
increase if you
the disc.
only
setting (page 21)
recording
recording
and time
the
DVD-RW disc in Video
a
If the NICAM
About HDD
the
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 28 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
This recorder
the disc.
only,
The
recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
on
audio
add up to
always
Recording
Within the
or
from the disc and increase
mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
recording mode).
compression.
depend
time will
the material
only
Video
a
recording
When
title recorded
mode is VR
does not have
that the exact
time available will
the contents
mat. If the disc format is Video
the
not exact because the
full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
?
mode is
recording
are
until the disc is
player.
By default, the DVD-RW disc format is Video Recording
format, though you can change this to Video format, if
times shown
variable bit-rate video
uses
means
may not
disc.
settings
recording
recording
Default
quality,
about 1 hour of
sufficient for most
about 2 hours of
recording
time
applications,
on a
DVD.
Slightly lower video quality, but doubles
recording time on a DVD to around 4 hours.
LQ
--
the
recordings.
ote
The maximum number of titles that
can
be recorded
on
the HDD is 255.
45
RECODING
Recording Overview (Continued)
Restrictions
video
on
recording
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFI-
?
copy-protected video using this
Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
?V ideo signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
NITION TELEVISION SETS ARE FULLY COMPATIBLE
?You cannot record
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
recorder.
BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CONNECTION
TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
DVD & HDD
RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
?
format.
?
VR mode DVD discs in NTSC format is not available
for this recorder.
protection system (with scramble system) only allowing the recording of 'copy once' broada
You
copy
cast programs. CPRM stands for Content Protection for
simply clean-up (erase) all contents on the disc
recording from the first section of the disc.
disc format is not changed.
can
Load
1
2
recordable disc.
a
Press and hold REC
compatible,
means
can
only
be made
on
mode, and CPRM recordings
played
players
that
are
than 3
on
the TV
screen.
Cancel
OK
DVD-RW discs format-
ted in VR
on
more
Delete all titles and record?
can
recordings
button for
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
(z)
seconds.
The message will appears
which
Video
then start
Recordable Media.
This recorder is CPRM
Recording
VR
Clean-up Recording
The
What is 'CPRM'?
CPRM is
Additional Information for
can only be
specifically compatible with
CPRM.
Use b / B to select "OK" then press ENTER.
will start. (The REC indicator lights in
3 Recording
the
display window.)
Copyright
?
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the country in which you are making a copy. Copying of copyright material such as
films or music is unlawful unless permitted by a legal
exception or consented to by the rights owner.
This
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
46
Playing Your Recordings on Other
Players (Finalizing a Disc)
Most
DVD
regular
players
can
play
finalized discs
recorded in Video mode. A small number of
also
play
DVD
DVD-RW discs recorded in VR
or
not. Check the manual that
er
to check what kinds of discs it will
came
players
can
mode, finalized
with the other
play-
play.
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
can
MENU/LIST
To finalize
or
a
TITLE.
disc, refer
to "Finalize"
on
page 29.
Timeshift
(Pause, Live TV/Playback) Setup and Operation
Introduction
Do not miss
Clip
a scene
from
live broadcast. If the tele-
a
phone rings while you are watching your favorite live
broadcast, just press "TIMESHIFT" and "PAUSE" before
answering the phone. The timeshift function will be acti-
You
Record
edit
can
the HDD
1
vated and the broadcast is then recorded for later view-
HDD
during Timeshift
(Hard Disk Drive).
to store the program
on
During Timeshift, use pause step, search and
slow-motion to find the starting point.
ing.
After the
call or viewing interruption, press
"SCAN" to watch the program.
Press "STOP" to return to the live broadcast.
"PLAY"
phone
Timeshift
can
2
(Pause, Live TV/Playback)
Operation
You
CLIPREC
14:37
or
HDD
store
a
program in the HDD storage cache
3
Press TIMESHIFT while
watching a TV program.
display appears on the screen as
The Progress Bar changes to timeshift
Bar
Progress
shown below.
14:37
15:37
34
5
1.
Indicates
2.
Indicates current Timeshift
3.
Indicates Timeshift start time.
4.
5.
Indicates Timeshift
mode.
elapsed
Indicates the time that is
Normal
ending point
of the sec-
want to record.
playback
of
continues.
1 and 4 to make several
a
Clip
program.
Press STOP to stop Timeshift.
6
Confirm message will appear.
7
press STOP
Use b / B to select 'OK' then press ENTER. Or,
again.
The current broadcast is
displayed
on
the
screen.
position.
otes
time.
one
?
Selected sections
?
If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
hour from Timeshift
?
ips
are
recorded
on
the HDD.
the program may not be recorded on the HDD.
Clip records cannot be made for sections lasting less
than 5 seconds.
can use
during
ending point.
Press RECORD at the
start time.
?You
the
on
Bar.
Repeat steps
PLAY
of the sec-
Use pause step, search and slow-motion to find
the
5 Records
12
starting point
tion you want to record.
Progress of the edit is indicated in red
4 tion you
icon after 5 seconds.
playback
Press RECORD at the
Progress
temporarily.
The
15:37
trick
play
functions
timeshift. Refer to
pages 34-37.
?You can edit the cached
the program
on
(Slow, Scan, etc.)
Playback Operation on
clip during Timeshift to retain
Clip Record on the
Jump
1.
the HDD. Refer to
right.
to Start
Press ENTER
during
during
Timeshift
timeshift. The
menu
will
appear.
2.
Press b and
playback
starts from the very
beginning
of the timeshift.
ote
If the timeshift
operation
is
elapsed
for
more
than 6
hours, the oldest timeshift section of the cache will be
incrementally
Jump
1.
deleted.
to End
Press ENTER
during
during
Timeshift
timeshift. The
menu
will
appear.
2.
Press B and
jumps
to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1.
Press STOP to exit Timeshift function.
2.
Confirm message will appear.
Use b / B to select 'OK' then press ENTER.
The current broadcast is displayed on the screen.
47
RECODING
Basic
Basic
Recording
Recording
from
Follow the instructions below to record
Recording
starts
disc is full
or
To Pause the
TV
a
TV program.
and continues until the
a
Press PAUSE/STEP
2
When you want to continue
PAUSE/STEP (X).
immediately
recording.
you stop the
To record
ote
You must load
recordable disc for DVD
a
watching
recording.
Press HOME.
1
appears.
Select
media (HDD
DISC)
2 gram then press
The HOME
menu
or
a
to record TV pro-
ENTER.
Select 'TV
3 press
(HDD)'
'TV
or
then
(DVD)' option
Also make
sure
that the TV
input
4
Set
a
REC
5 record.
can
pressing
AUDIO
rent audio
Stereo
Press TV/DVD to select the TV mode
2
Instant Timer
1
during viewing
channel is displayed
or mono
(language)
to listen
TV program. The
→
Left
→
Bilingual
?
?
→
Main
→
Sub
Recording
Follow
steps 1-4
from
TV).
a
by
as
can
record either NICAM
audio. If the NICAM
Stereo, you
or
regular
is set to Auto,
NICAM, the audio automati-
setting (page 21)
then if the broadcast is
to NICAM and you
NICAM audio. If the broadcast is
cally changes
ular audio is
or
always
can
record the
non-NICAM, the reg-
recorded.
If NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the program.
Press REC
6 Recording
(z)
7
or
the
once
recalled
will
(z)
setting
for
a
Time
Recording
Press REC
to check the
automatically
recording
time. The
return to the TV
moment.
Also, remaining time of recording is shown in the dis-
play
window.
To Extend the
The
time
Time
Recording
be extended
recording
(z).
Each subsequent
press increases the
within free space
(maximum
can
anytime by
press-
REC
ing
240
recording
minutes).
time
a
fixed
(x)
on
to
length
right.
Caution
If the recorder is
unplugged (or
recording,
while the recorder is
HDD is full.
Recording
Press STOP
48
Checking
will start.
To record for
Timer
Instant Timer Record Menu
once.
(The REC indicator lights in the
display window.)
Recording continues until you press STOP (x) or
the disc
(Basic Recording
19h 30min Free
screen
This recorder
shown left
10MRec
Right).
?
recording
→
recording in Video mode and if the broadcast is bilingual, set audio channel from the Video
Rec Audio in sub-menu of the Setup menu (see page
28).
(Left
a
time
When DVD
If the sound is of poor quality when set to
can often improve it by changing to Mono
allows you to make
preset length without using the program
a
Mono
→
to be viewed.
Recording
Mono
broadcast: Main+Sub
record-
(z) repeatedly to select the recordlength.
Recording starts after the first press. Each subsequent press increases the recording time within free
space (maximum 240 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
cur-
Right
during
Press REC
on-screen.
broadcast: Stereo
of
2 ing
TV Audio Channel
select the audio channel
TV program while
another
one
timer.
recording mode as necessary by pressing
MODE repeatedly. (HQ, SQ, LQ)
Changing
recording.
recording, press
a
Use v / V buttons to select the TV channel to
You
to pause
ing. The TV indicator appears.
Using the TV, select the channel
easily
is set to this recorder.
If you load a completely blank disc, the recorder takes
short while to initialize the disc.
(X)
1
Instant Timer
ENTER.
Recording
1
of
time,
stop recording.
see
Instant
lost.
there is
the
a
power failure)
will be
recording
Timer
Recording
This recorder
can be programmed to record up to 7 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be record-
ed,
1
the
time and
starting
Press ENTER, the program will be memorized
4 by the recorder.
To check the
length.
Press TIMER REC.
The Timer Record
indicates that the timer
will appear.
menu
Timer Record
Media
HDD
Date
Start Time
05
9/5 Fr
19:20
Media
TIMER REC
Timer Rec List
Choose
--
Length
79h 30m Free
Repeat
PDC
----OnceOff
REC MODE
Mode
media to record
a
Prog.
Close
programmed
(HDD
Press RETURN
6
Make sure that you load a recordable disc for
DVD recording and press POWER to switch
your unit to
(O)
to exit the
Program
List.
Standby.
or
Choose
memorized program number,
inputs from which to
a
?
Choose
?
Date
?
Start Time
?
Length
?
Repeat
(Monday
--
date up to 1 month in advance.
a
Set the
Set the
--
-
a
Friday),
The PDC
recording
start time.
recording length.
Choose
--
--
--
desired
or
repeat (Once, Daily
The timer indicator
lights in the display window when
standby with the timer active.
When DVD recording in Video mode and if the broadcast is bilingual, set audio channel from the Video
Rec Audio in sub-menu of the Setup menu (see page
28).
the recorder is in
of the external
record.
PDC
is
otes
--
or one
?
the Timer Record List
recording
5
DVD).
?
on
the Timer Record List
correctly.
ABC
Enter
?
SQ
Prog.
C50
programming,
will appear.
Check field's "Rec. OK"
?
?You must press POWER to stop the timer recording.
?
If you set a timer recording to record to DVD but there
isn't
Weekly).
system automatically adjusts the
recording time so that even if a program is not
running to schedule, you won't miss it. For PDC
to work properly, you must input the correct
a
recordable DVD loaded at the time of the
recording, the Recovery Recording
matically record the program to the
feature will autoHDD for you.
announced time and date of the program you
want to record.
Note that PDC may not work with every station.
otes
?
Stations that
use
PDC
typically include PDC
guide pages.
pages when setting a
information in the teletext TV
Please refer to these
timer
?
recording.
This recorder takes
minutes to start
when
approximately 1 2
recording. This means that
-
using PDC, there may be instances
beginning of the program is not
where the
recorded.
Enter the
necessary
2 recording(s).
?
b / B
?
v / V
?
information for your timer
(left/right) move the cursor left/right
(up/down) change the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
--
menu.
?
Press ENTER after
filling
in all the program infor-
mation.
?
3
Press TIMER REC to
Set
a
display
Timer Record List.
recording mode as necessary by pressing
repeatedly. (HQ, SQ, LQ)
REC MODE
49
RECODING
Timer
Recording (Continued)
Checking
Timer
Programming
can
turned
Details
Recording
be checked whenever the recorder is
Press TIMER REC twice.
on.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
timer
a
recording.
Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
Media
Prog.
Date
Start
Length
Mode
Check
PDC
05
02/12 Sa
19:20
30min
LQ
Rec. OK
Off
05
06/12 We
19:20
30min
HQ
Rec. OK
Off
Edit
Canceling
CLEAR
Delete
Timer
a
TIMER REC
Tim er Rec
Close
Recording
You
can clear a timer setting anytime before the recording actually starts.
Usev/Vtoselectaprogramyouwanttoeraseon
?
the Timer Recorder List. If you want to
program, press CLEAR.
Stopping
After
a
timer
a
Timer
Recording
has
recording
in
erase
the
Progress
started, you
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
the timer is set, the recorder will not
though
record when:
?
There is
on
no
disc loaded and there is not free space
the HDD.
?Anon-recordable disc is loaded and there is not free
?
?
?
space on the HDD.
Disc Protect is set to On in the
is not free space on the HDD.
Power is turned on.
There
there
are
are
Setup menu and
(see page 29).
there
already 99 titles recorded on the disc and
already 255 titles recorded on the HDD.
You cannot enter
a
timer program when:
?Arecording is already underway.
The time you're trying to set has already passed.
There are already 7 timer programs set.
?
?
If two
?
?
or more
timer programs
The earlier program takes
When the earlier program
overlap:
priority.
finishes, the later program
starts.
?
If two programs
are
set to start at
exactly
the
same
time, the program entered first takes priority.
If the disc is
damaged,
the
successfully.
In this
shows "Rec.
OK", it may
50
recording may
though the
case even
not be.
not
complete
Check field
from
Recording
can
record from
camcorder
external
1
external
an
VCR, connected
or
External
from External
Recording
You
an
Input
Components
component, such
You
as a
to any of the recorder's
from
Recording
can
record from
the DV IN
jack
on
a
digital camcorder connected to
panel of this recorder. Using
the front
the recorder's remote, you
corder and this recorder.
inputs.
Make sure that the
component you
record from is connected
properly
want to
Before
to the
DV IN
Digital Camcorder
a
can
control both the
recording, make sure that the
jack is set up (see page 28).
audio
cam-
input
for the
recorder. See page 18.
2
3
Choose
HOME
media
a
menu.
Press AV
(HDD or DVD)
(see page 30).
to record
using
to select the external
repeatedly
input
ips
?
The
must be DVC-SD format.
?
Some camcorders cannot be controlled
signal
source
using
this
recorder's remote.
to record from.
?
?T uner: Built-in tuner
?AV1: EURO AV1 AUDIO VIDEO mounted
back
on
If you connect a second recorder using a DV
you cannot control the second DVD from this
?You can't control this unit
panel
?AV2: EURO AV2 DECODER mounted
on
remotely
jack.
connected to the DV IN
back
from
a
cable,
one.
component
?You can't record date and time information from
panel
?AV3: AUDIO IN 3 / VIDEO IN 3 mounted
on
back
DV
a
cassette.
panel
?AV4: INPUT 4
(VIDEO, AUDIO (L/R),
IN) mounted on front panel
?DV: DV IN mounted on front panel
Select the
4 pressing
mode
recording
REC MODE
S-VIDEO
1
2
by
repeatedly. (HQ, SQ, LQ)
as
necessary
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality
Press REC
5 Recording
(z)
3
(The
display window.)
Recording continues
REC indicator
lights
in the
Timer
6
a
fixed
Recording
Press STOP
(x)
on
to
Choose
HOME
(x)
length
of
time,
see
DV
page 48.
stop recording.
4
input
using
is
as you require.
(original audio)
(overdubbed audio).
of the
Press AV
to record
is set from the DV Rec Audio in sub-
Input
page 28 for
or
Instant
(HDD or DVD)
(see page 30).
choose between Audio 1
can
menu
until you press STOP
Setup
more
menu.
See DV Rec Audio
on
information.
repeatedly to select the DV input.
display window and on the TV
DV appears in the
screen.
5
Find the
place on the camcorder tape that you
recording to start from.
results, pause playback at the point from
want to the
For best
ote
which you want to record.
If your source is copy-protected using CopyGuard, you
will not be able to record it using this recorder. See
Copyright
media
a
menu.
Check that the DV audio
You
?
the disc is full.
To record for
digital camcorder is connected
panel DV IN jack. See page 18.
and Audio 2
once.
will start.
Make sure your
to the front
on
page 46 for
more
?
details.
on your camcorder, you can use this
recorder's remote to control the camcorder using
Depending
the
6
STOP, PLAY and PAUSE functions.
Press REC
(z)
once
to start
recording.
automatically stopped if the recorder
signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
detects
is
no
control the camcorder from this remote control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
displayed on screen for a while after
recording stops.
For timer recording to work properly on this
recorder, the digital camcorder must also be
switched on and in operating.
51
RECODING
from
Recording
External
an
Input (Continued)
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to this recorder using a single
DV cable for input and output of audio, video, data and
control signals.
You may see the following messages appear
TV screen when using the DV IN jack.
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
as
IEEE 1394-1995.
logo
only compatible with DV-format
(DVC-SD) camcorders. Digital satellite tuners and
Digital VHS video recorders are not compatible.
a
more
than
one
properly,
or
cam-
just
one
camcorder.
time to this recorder.
ment connected via the DV IN
jack (including
equiptwo
?
It may not always be possible to control the connected camcorder via the DV IN jack.
?
Digital
camcorders
can
usually
record audio
Check the tape
There is
no
cassette loaded into the connected
equip-
ment.
recorders).
as
stereo
Uncontrollable device
This recorder cannot control the camcorder.
twin stereo tracks of 12-bit/32kHz.
16-bit/48kHz,
or
This recorder
can
only
record
Set DV Rec Audio to Audio 1
(see page 28).
Audio input to the DV IN
jack
one
or
stereo audio track.
Audio 2
as
should be 32
or
Picture disturbance
on
the
recording
Updating
Information
Camcorder is
required
48kHz
updating
may
occur
information for DV.
Camera mode
Camcorder is set to
(not 44.1kHz).
camera
mode.
if the
component pauses playback or plays an
unrecorded section of tape, or if the power fails in the
source component, or the DV cable becomes disconsource
nected.
Troubleshooting
If you can't get a picture and/or audio
check the bullet points:
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
2
through
the DV IN
jack,
?
?
the
Not connected to camcorder
The camcorder is not connected
Too many devices connected
The DV jack on this recorder supports connection to
DV camcorder at
?You cannot control this recorder from external
?
your
This recorder is
?You cannot connect
?
on
corder is switched off.
trademarks.
are
Messages
Make
?T ry
sure
the DV cable is
switching
switch back
?T ry
properly connected.
equipment then
off the connected
on.
switching
the audio
input.
ote
Depending
on
the connected
be able to control it
with this recorder.
52
using
camcorder, you may not
the remote control supplied
Title List and
Chapter
List Menu Overview
the Title List menu you can edit video content on
unfinalized VR mode DVD discs, as well as video con-
Choose
Using
tent
the internal hard disk drive
on
features available in the Title List
whether you are editing video
the HDD, and whether you're
a
HOME
(HDD). The editing
depend on
on a
VR mode
DVD,
or
?You
or
?
DVDs, there are a limited
number of editing commands, including naming and
ized,
a
editing
You
possible.
playback.
can
still
use
menu
There
two ways to edit VR mode DVD-RW discs.
directly edit the Original content of the disc, or
You
you
Playlist
can
create and edit
a
Playlist.
The
menu
You
can
for DVD disc.
After
ote
if you display the Title List menu for
of the titles may appear with a mark.
These titles were recorded with a Line Input setting difsome
During recording,
setting
(or chapter)
these thumbnails
Changing
display
the Title List
screen
on
menu
shows
the disc
using
or
HDD.
the THUMB-
Title Thumbnails
on
page
the information of selected
menu.
To exit the Title List menu, press RETURN
3 repeatedly.
of the recorder.
these titles cannot be
on
the Title List
part of the
selecting a title or chapter on the Title List of
Chapter List menu, then press ENTER. The menu
options on the left side of the menu. Use v / V to select
a option then press ENTER to confirm your selection.
(Details for menu options -see page 54)
During recording,
ferent to the current
change
Press DISPLAY to
title
screen are
The main
NAIL button---see
55.
HDD,
options.
thumbnails of the titles
just
Editing material recorded on the HDD is similar to editing the Original content of a VR mode DVD-RW, with
similar commands for erasing and naming titles, as well
as fine control over the content of chapters within titles
the
HOME menu, select
using
menu.
On the left side of the
doesn't
Playlist
any of the content on the disc, but
controls how the content is played back.
actually change
it
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
to select titles for
are
can
access
than six titles.
the
Title List
also
selecting titles, use the v / V buttons to
display the previous/next page if there are more
Video mode disc has been final-
is not
can
do this.
When
?
further
menu.
when
TITLE LIST then press ENTER.
Playlist.
titles. Once
to edit
or
should be
With unfinalized Video mode
erasing
a
menu.
to
menu
editing Original content,
media
(HDD
DVD)
using
1
(see page 30).
Press MENU/LIST
display the Title List
2 Playback
stopped
you
played.
(O)
Thumbnail
Press DISPLAY to
Currently selected title:
display more detailed title
Shows the selected title number and
total number of titles.
information for selected title.
Current media
Indicates the record
free space, and
Title List
mode,
elapsed
1/12
HDD
1h 5min
time
HQ
progress bar.
Free
Title 1
7/12
Menu
To
display
a
menu
options:
option, select
title then press ENTER.
Title 2
0:16:00
9/12
Shows the title name, recorded
Title 3
0:35:00
10/12
0:30:00
date, and recording length.
Play
Delete
Rename
Edit
Title 4
13/12
Title 5
0:08:00
16/12
Title 6
0:10:00
19/12
0:15:00
Sort
Dubbing
Enter
DISPLAY
Info
Close
53
EDITNG
Title List and
Title List-HDD
menu
HDD
options
Start
Play:
Play
List Menu Overview
Chapter
playback
Chapter List-Original
of the selected
title.
Delete
Delete: Deletes the title.
Rename
Rename: Edits the title
Edit
58)
?
Dubbing
?
Divide
options.
a
Title:
Delete
a
Playlist
Combine: Combines two
Title
List
or
menu
the Title
into
one.
List-Playlist
Play
Chapter
Date: Lists the programs
recorded date.
by
?T itle: Lists the programs
by
Rename
title
Delete
Category:
Lists the programs
by
Delete Part
category.
menu
Play:
Start
Play
Chapter
Rename
Delete
menu
Start
VR
options
the selected
playback
Chapter: Displays Chapter
Playlist menu of the title.
Rename: Edits the title
List-
name.
(page
Delete: Deletes the title from the
the title to another
List-Playlist
Title.
VR
options
playback
ed
Title
Title:
Delete
Chapter: Displays Chapter
Original menu of the title.
Rename: Edits the title
List-
Move
Combine
name.
a
menu
(page 57)
part of the
(page 57)
menu
VR
options
Play: Starts playback
chapter.
Play
the selected
title.
menu.
Delete Part: Deletes
Chapter List-Playlist
Play:
to the
title.
Title
Dubbing: Copies
media. (page 62)
List-Original
chapters
(page 60)
58)
name.
Title
chapter. (page
57)
part of the
on
?
Displays Title List-Original
of the chapter.
Playlist: Adds the chapter
Playlist. (page 56)
(page 57).
Sort: Lists the programs
?
menu
of the select-
Combine
title into two
Delete Parts: Deletes
Title
Title
Category
Title
(page 59).
Divide: Divides
by Date, Title,
Category. (page 58)
Date
ed
(page 59).
Combine
Delete Part
(page
Combine: Combines two titles into
one
?
(page 57)
name.
Play: Starts playback
chapter.
Play
VR
options
menu
Delete: Deletes the
Edit: Selects Edit
Sort
(Continued)
of the select-
Displays Title List-Playlist
of the chapter.
Delete: Deletes the
chapter
Chapter List-Playlist
(page 57)
menu.
Delete Part
Delete: Deletes the title.
(page 57)
chapter on the
Chapter List-Playlist menu to a
position on the menu. (page 60)
Playlist
Delete Parts: Deletes
part of the
Combine: Combines two
(page 58)
Title.
Dubbing
(page 57)
Playlist: Adds
(page 56)
into
the title to the
Dubbing: Copies
media. (page 62)
54
a
Move: Moves
from the
Playlist.
the title to another
one.
a
(page 60)
chapters
HDD, VR Mode: Original and Playlist Editing
Titles in the disc's
original
content contain
one or more
chapters. When you insert a disc's title into the Playlist,
all the chapters within that title also appear. In other
DVD-Video disc do. Parts
on a
Original
can
you
title to the
titles. From the
Playlist
or
menu
add
or
delete
are
Original
and
title.
chap-
Playlist
chapter or
Playlist creates a new title made up of a sec(ie., chapter) of an Original title. Deleting a part
removes part of a title from the Original or Playlist
tion
menu.
Each title and
menu
1
Play
is
the title
(Original
or
List
When
editing using
tions, the
the
start and end frames may not be
exactly
Original
as
one
currently
dis-
that appears in the Title
menu.
The still
Delete, Add and Move func-
the
a
Playlist).
Press THUMBNAIL to make the
2 played picture
Caution
?
Thumbnail
HDD
a
as
sections of
parts. Adding
VR
chapter displayed in the Original or
Playlist
represented by a thumbnail picture
taken from the start of that title or chapter.
If you prefer, select a different still picture from within
words, chapters in the Playlist behave exactly
ters
Title Thumbnails
Changing
VR
Titles, Chapters and Parts
picture that you choose
Playlist menu.
appears in both the
or
set in the start and end
?
point display.
During Playlist playback, you may notice
tary pause between edits. This is
not
a
ip
a momen-
malfunction.
You
can also change the thumbnail picture of the title on
Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
the
Adding Chapter
Markers
VR
Chapter
You
chapter marker anywhere in a Playlist or
during recording or playback.
chapter is marked, you can use the Chapter
can
put
Original
title
Once the
Search
a
feature,
well
as
as
delete, combine and
move
chapters in the Chapter List-Original or Chapter ListPlaylist menu.
You can insert up to 999 chapter markers in both the
Original and Playlist contents.
ote
In Video
intervals
from the
mode, chapter markers
are inserted at regular
automatically. You can change this interval
Initial Setup menu (see Auto Chapter on page
28).
1
Play
the title
At the
chapter
?You
or
Playlist).
you want to start
CHP ADD.
2 press point
A
(Original
can
a new
chapter,
marker icon appears on the TV screen.
also put chapter markers in during
recording.
55
EDITNG
HDD, VR Mode: Original and Playlist Editing (Continued)
Making
New
a
Playlist
VR
Use this function to add
an Original title or chapter to
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting an Original or Playlist title/chapter on page
57).
the
Adding Additional Title/Chapters
Playlist VR
You
can
add
Original title or chapter to
if it is already registered.
an
---
The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you
add more chapter markers to the Original later, these
are
not
You
automatically copied
over
into the
Playlist
chapters to one disc If
chapter of a title, use the Adding
title/chapter to the Playlist on this page.
can
add up to 999
want to add
1
.
a
Choose
a
Original
menu or
title
Playlist
1
a
Original
menu or
you
only
Play
a
Chapter
Play
2
Delete
Playlist
Combine
Dubbing
Playlist
Play
Delete
Title
Delete Part
Delete
Playlist
Combine
Dubbing
Playlist
List-Original
Chapter List-Original
Use v / V to select
'Playlist'
Select
'Playlist'
from the
menu
options
a
Playlist.
Playlist
TITLE 1
Chapter List-Original
Use v / V to select
from
then press ENTER.
New
List-Original
2 options
Rename
Title
Chapter
Delete Part
or
screen.
Play
Title
title
title.
menu.
Delete
a
chapter on the Title ListChapter List-Original menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
or
Rename
add to
even
Choose
chapter on the Title ListChapter List-Original menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
Title
title
to the
TITLE 2
menu
then press ENTER.
Select
a
Playlist.
New
Playlist
3
Choose
a
Title
tered to insert
List-Playlist that is already registitle or chapter, then press
a
ENTER.
The title
or
chapter
appears in the
updated Playlist
menu.
1-3 to add additional title
4 Repeatthesteps
Playlist.
ter
3
Select 'New
The
new
chapters
56
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist'
or
chap-
on
Press RETURN
5 back
(O) to exit, or MENU/LIST
List-Original menu.
to the Title
to go
HDD, VR Mode: Original and Playlist Editing (Continued)
Deleting an Original
Title/Chapter HDD
When you
title
or
Playlist
Deleting
VR
You
from the
chapter
Playlist
only remove it from the Playlist; the
title/chapter remains in the Original menu.
erase a
or
can
a
delete
HDD
Part
VR
part which you do
a
not want in the title.
1Useb/B/v/Vtochooseatitleyouwantto
delete
the Title List
then press
menu, you
on
The
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted
from the Original are also removed from the Playlist.
options
appears
on
menu
ENTER.
the left side of the
menu.
2
Select 'Delete Part' from the
3
Press ENTER.
options
the
on
menu.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
ote
It may not be possible to delete
than 5 seconds long.
chapters
that
are
highlighted.
less
Title Edit
TITLE 1
Delete Part
20/8 00:35:42
HDD
1Useb/B/v/Vtochooseachapterortitleyou
delete
the Title List
Chapter List
want to
menu
The
or
on
then press ENTER.
menu
options
appears
on
the left side of the
Start Point
screen.
End Point
2
Select 'Delete'
option
from the
options
on
the
Next Part
0:00:00.00
Cancel
menu.
Select
Done
e.g., If you select "Delete"
HDD menu.
option
on
Starts
Press ENTER at the
5 you
Rename
The
Sort
3
The confirm message for
4
The selected
the
deleting
the new,
will appear.
updated
menu
Bar.
ending point.
ending point
you want to delete.
You can cancel the selected
point,
of the section
use
v / V to
select 'Cancel' icon then press ENTER.
Use b / B to select 'OK' then press ENTER.
chapter or title is deleted.
pressing ENTER,
displayed.
highlighted.
on the Progress
part is indicated
Press ENTER at the
7
Press ENTER to confirm.
of the section
starting point
Use pause step, search and slow-motion to find
6
Dubbing
-
search and
use
want to delete.
'End Point' icon is
Edit
1
and
to
Delete
5 Repeat steps
Close
playback
pause step,
4 slow-motion
find the starting point.
Play
After
Move Point
the Title List-
is
ip
With HDD
recordings,
Select 'Next Part' icon
4 to continue to delete from the
then
repeat steps
you
on
can
the
delete additional
menu
then press
part.
ENTER,
4-7.
menu.
6
Press RETURN
menu.
(O) repeatedly
to exit the
If you finish to
ENTER.
8 press
The selected
List
edit, select 'Done' icon then
part is deleted from the title and Title
menu
appears.
When recording in VR mode, the confirm message
for deleting will appear. Use b / B to select 'OK'
then press ENTER.
ote
It may not be possible to delete
3 seconds long.
parts that
are
less than
57
EDITNG
HDD, VR Mode: Original and Playlist Editing (Continued)
Naming
You
1
VR
and
Playlist
titles
be up to 32 characters
long.
can name
Names
can
Sort
HDD
a
Title
Original
independently.
Choose the title you want to name
List menu, then press ENTER.
The
menu
options
appears
on
on
the Title
the left side of the
This function allows you to access show listings organized by Date, Title, or Category on the Title List-HDD
menu.
1
So you
Use v/V to select 'Rename'
option
then press
menu
2
appears.
menu
options
Alphabet Capital
News
appears
on
the left side of the
option
then press
appears.
Play
Genre
1
easily.
ENTER.
Sort
EDU
options
Use v/V to select 'Sort'
TITLE 1
DOCU
find title you want to watch
menu.
ENTER.
Keyboard
can
Choose any title on the Title List-HDD menu,
then press ENTER.
The
menu.
2
HDD
23456789
I
0
Drama
ABCDEFGH
ANI
Sports
KLMNOPQRST
Movie
Show
AV IN
etc.
Delete
J
Rename
Date
Edit
Title
Sort
Category
UVWXYZ
Space
Delete
OK
Cancel
Dubbing
3Enteranameforthetitle.Useb/B/v/Vto
press
select
a
ENTER to confirm
character then
your selection. Refer step 3
21 (Station Rename).
as
shown
on
page
After
pressing ENTER,
played.
ip
You
can
add the genre
only
for HDD title
name.
Choose OK then press ENTER to fix the
return to the previous menu screen.
4 and
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
otes
?
?
Names
can be up to 32 characters long.
For discs formatted on a different recorder, you will
see only a limited character set.
58
Use v/V to select 'Date', 'Title'
then press ENTER.
3 option
or
the sorted
'Category'
menu
is dis-
HDD, VR Mode: Original and Playlist Editing (Continued)
Combining
Two Titles Into One
Use this function to combine two
titles into
HDD
adjacent Original-HDD
Divide One Titles Into Two
Use this command to
one.
1
ote
This function is not available if there is
only
one
titles
split
a
HDD
title up into two
new
titles.
On the Title List-HDD menu, select a title you
want to divide then press ENTER.
The menu options appears on the left side of the
screen.
within the HDD.
Select 'Divide' from the Title List-HDD
1
On the Title List-HDD menu, select the first title
of the two titles you want to combine then press
2 options.
Title Edit-Divide
ENTER.
The
'Divide'
menu
options
on
appears
the left side of the
menu
appears and playback starts.
is highlighted on the left side of the
option
menu
screen.
screen.
2
Select 'Combine' from the
menu
options.
Play
Title Edit
Divide
HDD
Play
Delete
Combine
Rename
Divide
Edit
Delete Part
& Select the Start Point
TITLE 1
20/8 00:35:42
Divide
Sort
0:00:00.00
Cancel
Done
Select
Move Point
Close
Dubbing
3
Select the second title of the two titles you want
to combine then press ENTER.
Confirm message appears.
4
Use b / B to select 'OK' then press ENTER.
pressing ENTER, the updated menu is dis-
After
played.
3
4
Use pause step, search and slow-motion to find
starting point you want to divide the title.
the
When 'Divide'
ENTER at the
You
can
option
point.
clear the
is
highlighted, press
dividing point
and exit the Title
Edit-Divide menu, use v / V to select 'Cancel'
option then press ENTER. The dividing point is
clear.
Choose 'Done'
option
5 the dividing point.
then press ENTER to fix
The title is divided into two
new
titles.
59
EDITNG
HDD, VR Mode: Original and Playlist Editing (Continued)
Combining
Two
Chapters
Into One
Moving
VR
Use this function to combine two
Original chapters
into
adjacent Playlist
or
VR
Playlist Chapter
a
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
one.
ote
This function is not available if there is
ote
This function is not available if there is
only
one
chapter
within the title.
1
On the Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER on the Chapter ListOriginal or Chapter List-Playlist menu.
The menu options appears on the left side of the
screen.
2
1
2
Select
chapter
a
on
the
only
one
chapter.
Chapter List-Playlist
menu.
Press ENTER.
The
menu
options
appears
on
the left side of the
menu.
Use v / V to select 'Move'
3 options
option
from
Playlist
then press ENTER.
Use v / V to select 'Combine'.
Play
The combine indicator appears between the two
chapters you want to combine.
Title
Play
Delete
Title
Move
Delete
Combine
Move
Combine
4Useb/B/v/Vtochoosetheplaceyouwant
the chapter
then press
to move
to
ENTER.
Confirm message appears.
Press ENTER to confirm.
3
Confirm message appears.
4
After
Use b / B to select 'OK' then press ENTER.
pressing ENTER, the updated menu is dis-
played.
60
5
Use b / B to select 'OK' then press ENTER.
pressing ENTER, the updated menu is dis-
After
played.
Copying
One Touch
Introduction
Use the
copying
?
Back up
DVD.
?
Make
a
features of this recorder to:
important recordings
DVD copy of
in another
a
stored
recording
on
on
the HDD to
DVD to the HDD for
a
a
play
editing.
method of
is to
the One
simplest
copying
Copy feature. Using this you can very simply
copy the title that's currently playing from HDD to DVD,
use
Touch
or
the other way around.
Restrictions
on
For One Touch
The
use a
VR mode DVD-RW disc
Ver. 1.1
CPRM
the
restrictions
(see
following
on
compatible
page 46 for
more on
and
the first 32 characters of
on
?You can't
to
a
being
a name are
copied.
Video mode disc.
the One Touch
use
title if any
to
Low resolution
to
copied
function to copy
a
aspect ratios can't be
Video mode disc. Use
a
DVD-RW disc for this
?
Copy
part of the title is copy-once protected.
?Atitle that contains mixed
ed.
(LQ)
a
VR mode
type of material.
widescreen material can't be
Video mode disc. Use
a
DVD-RW disc for this
type
a
VR mode
of material.
can
?Amedia in NTSC format
can
not be
One Touch
copied.
One Touch
Recording equipment should be used only for lawful
copying and you are advised to check carefully what is
lawful copying in the country in which you are making a
copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception
or consented to by the right owners.
from DVD to HDD
to
copies
HDD)
a
single
title
continues
through to the end of the title, when recording
automatically stops. The copy will be made in the
recording mode (HQ, SQ, LQ) that is currently set.
During
DVD
playback, press
DUBBING to copy the
current title to HDD.
Playback
The
High-speed copying
Copying
Copy
Copy (DVD
to the HDD in real time. When you start copying,
playback jumps back to the start of the title, then
Copyright
starts
on-screen
again from the beginning of the current title.
display indicates that the title is being copied.
otes
between DVD and HDD is
completely digital
loss of quality in the
process and therefore involves no
audio or video. This means that you
a
can
?
The maximum title
length
?
The
when then recorder detects
copying stops
badly scratched or
transfer back
and forth without
having to worry about the quality getwith each copy 'generation'. It also means
that copying can be carried out at the maximum speed
ting
is
chapter markers in the copy may not be in
exactly the same positions as the original when
copied
identify copy-once protected material during
playback by displaying disc information on-screen.
DUBBING to copy the
playback, press
The
After
You
HDD
recording
apply:
copying a copy-once protected title to DVD it is
automatically erased from the HDD. It is not therefore
possible to copy a locked title that is copy-once protect-
record-
a
?T itle name, chapter markers, as well as thumbnail picture markers for the Title List menu, are also copied.
However, if you copy to a Video mode DVD-R/RW,
with CPRM
this),
that
display indicates that the title
copied. Playback continues while copying.
Some video material is copy-once protected. This
means that it can be recorded to HDD, but it can't then
to
sure
on-screen
only
want to transfer copyHDD to DVD, you'll need
work, make
current title to DVD.
?
freely copied again. If you
once protected material from
to
Copy
able DVD-R/RW disc is loaded.
copying
be
DVD)
Copy feature copies the currently playing title from the HDD to DVD. The whole title is copied,
regardless of where in the title you start copying. The
recorder copies at the maximum speed possible.
During
?T ransfer edited video from the HDD to DVD.
The
to
The One Touch
the HDD to
player.
?T ransfer video from
Copy (HDD
?
worse
possible.
When copying from HDD to DVD, the speed of copying
depends on the recording mode and the kind of DVD
disc you're using.
Title
name
when
?
and
copying
Thumbnail
chapter
from
copy may be
a
copying
is 6 hours.
a
protected part.
markers
are
also
copied, except
finalized Video mode disc.
chapter markers for
copied, but their position in the
slightly changed from the original.
picture
the Title List
copy
for
markers and
menu are
If some part of the title being copied is copy-protected, copying will start, but the copy-protected portions
?
will not be
copied.
ip
To
stop dubbing
at any other
time, press STOP (x).
61
EDITNG
Copying (Continued)
Dubbing
1
from HDD to DVD
On the Title List-HDD menu, select
a
from DVD to HDD
Dubbing
title you
want to dub then press ENTER.
The menu options appears on the left side of the
On the Title
1
screen.
List-Original
menu, select
a
title you
want to dub then press ENTER.
Menu options appears on the left side of the
screen.
Title List
Title List
Original
1/12
HDD
DVD-VR
1h 5min
HQ
1/12
Free
Title 1
Title 2
0:16:00
7/12
1h 5min
Title 3
0:35:00
9/12
10/12
HQ
0:30:00
Free
Title 1
Title 2
7/12
00:16:00
9/12
Title 3
00:35:00
10/12
00:30:00
Play
Play
Chapter
Delete
Rename
Rename
Delete
Title 4
Edit
Title 5
13/12
0:08:00
Title 6
16/12
0:10:00
19/12
Enter
DISPLAY
Use v / V to select
menu
Info
Close
'Dubbing'
from the
Enter
Dubbing
options.
appears.
Title
Free
menu
00:30:00
Space
47 min
Title
Free
HQ
Use b / B to select Rec.Mode
3 Fast),
(HQ, SQ, LQ,
copying Original
(See page 61 for more
high-speed copying.)
When 'Start' icon is
To
00:15:00
stop dubbing
highlighted, press
at any other
00:30:00
Space
1170 min
from the
options.
HQ
Cancel
Use b / B to select Rec.Mode
3 Fast),
Fast:
content
ENTER.
starts.
5 STOP (x).
Close
(HQ, SQ, LQ,
then press V.
'Start' icon is highlighted.
available when
on
Length
Start
VR mode disc.
4 Dubbing
19/12
Playlist
'Dubbing'
Rec Mode
then press V.
'Start' icon is highlighted.
information
LIST
appears.
Cancel
Start
Only
Info
Dubbing
Length
Rec Mode
a
DISPLAY
Use v / V to select
2 Dubbing
Dubbing
Fast:
Title 6
00:10:00
16/12
Playlist
Dubbing
to
Title 5
00:08:00
13/12
Sort
2 Dubbing
Title 4
Delete Part
0:15:00
time, press
to
a
available when
Only
copying Original
(See page 61 for more
high-speed copying.)
information
on
When 'Start' icon is
4 Dubbing
To
content
VR mode disc.
highlighted, press
ENTER.
starts.
stop dubbing
5 STOP (x).
at any other
time, press
ote
Depending
or
62
the disc
on
the conditions of the
itself, the dubbing may
recording equipment
capable.
not be
Video Mode:
Original Editing
the Title List
Using
From the Title List
display
Video
you
Deleting
play,
can
name
and
delete titles.
Once
a
Video mode disc is
changes its
titles to play.
screen
select
1
Before
on
can
do is
Free
Date
?
When
12/11
0:20:15
TITLE 2
14/11
0:43:30
TITLE 3
18/11
0:33:00
TITLE 4
20/11
0:10:00
TITLE 5
23/11
0:15:00
TITLE 6
25/11
0:17:00
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
increase if it is the last title
1
List
3
options
display.
Press MENU/LIST to
Title List
a
3
options
display
appears
Title List
option
then press ENTER
Start
the
on
the left side of the Title
menu.
Use v / V to select 'Delete' then press ENTER to
confirm.
After
an
the disc.
ENTER.
delete then
title then press ENTER.
appears on the left side of the Title
Use v / V to select
on
2Useb/B/v/Vtochooseatitleyouwantto
press
Close
Use v / V to choose
DVD-R disc, the title will
List, but the available record-
a
time will not increase.
List
Title List
delete titles recorded
Duration
TITLE 1
Select
2
can
Caution
If you delete a title from
disappear from the Title
1/12
1H 5M
finalized, you
?
the Title List.
display
Title
HQ
disc is
a
Video
the disc.
ing
DVD VIDEO
Title
finalized, the Title List
appearance and all you
Press MENU/LIST to
a
pressing ENTER,
displayed.
the new,
updated
to confirm.
Play
Rename
Delete
Dubbing
Play:
playback
Play
Rename
selected title.
Rename: Edits the title
Delete
name.
(page 58)
Dubbing
Delete: Deletes the title from the
Title List.
Dubbing: Copies the title
another media. (page 62)
to
Repeat steps
4 the
Title List.
2-3 to delete additional titles from
Press RETURN
5 Title List display.(O) repeatedly
4
title list is
Press RETURN
(O) repeatedly
to remove the
to exit Title List.
If the disc has
You should
already
see a screen
like the
been finalized
one
below.
Indicates total and current page number
Disc
name
Title list
DVD-RW
?
1/2
1
TITLE 1
12/11
0:30:21
2
TITLE 2
14/11
0:20:08
3
TITLE 3
18/11
1:10:03
4
TITLE 4
20/11 0:43:21
5
TITLE 5
23/11 0:15:21
6
TITLE 6
25/11 1:13:21
PAGE
UP
PAGE
DOWN
EXIT
Also you can exit the Title List
MENU/LIST.
Moves to the next
previous
or
page
Exits the Title List
display using
screen.
TITLE
or
63
DUBING
Language Code
Enter the
(See
appropriate
24).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6589
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
64
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
27).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
65
REF NC
Controlling
You
can
Your TV with the
control the sound
level, input
power switch of your LG TV with the
source, and
supplied
remote.
Controlling
You
You
can
control your TV
using
Remote Control
Supplied
can
other TVs with the remote
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
the buttons below.
code.
1.
While
holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
If
Buttons
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
By pressing
You
POWER
Turn the TV
AV
can
Switch the TV's
off.
input
source
input
sources.
Adjust
MUTE
Temporarily
press again
66
1
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
to restore.
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter a new code number, the code number
entered will be erased.
When you
replace
the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
the volume of the TV.
turns TV sound
Depending
previously
Scans up or down through
memorized channels.
VOL +/--
Code Number
LG / GoldStar
otes
on or
between the TV and other
PR +/--
Manufacturer
OFF,
again.
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Solution
Cause
Symptom
No power.
The power cord is disconnected.
No
TV/DVD mode for the recorder is set to
Press TV/DVD
TV.
repeatedly to choose DVD mode. TV
indicator disappears in the display
picture.
Plug the power
securely.
cord into the wall outlet
on
the remote control
window.
The TV is not set to receive recorder
Select the
signal output.
on
the TV
appropriate video input
the picture from the
recorder appears
The video cable is not connected
mode
so
on
the TV
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
input mode on the
you can listen to the
sound from the recorder.
audio cable is not set to receive
recorder
audio receiver
signal output.
The audio cables
are
the TV.
on
not connected
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
connected with
equipment
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The recorder does not
start
No disc is inserted.
Insert
a
disc.
cator in the
playback.
An
unplayable
disc is inserted.
Insert
a
(Check that the disc
display window is lit.)
disc.
playable
indi-
the disc
(Check
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
side
playback
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
picture from the
input is distort-
external
The video
Cancel the
from the external
signal
com-
ponent is copy-protected.
Some channels
are
Those channels
are
not stored in the
recorder.
when
Aerial
Camcorder
Camcorder is off.
image
is not
image
via
or
cables
are
loose.
Camcorder
input
or
function
or
change
Connect the
component directly
to your
Restore channels. See
"Program
Edit"
page 20-21.
Tighten
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
shown.
A/V
Rating
level.
You cannot connect via this recorder.
on
picture or sound of
broadcasting channel is
weak or missing.
The
rating
TV.
ed
skipped over
usingv/V.
tray correctly
Clean the disc.
the
The
the disc
on
guide.
DV IN to
The recorder INPUT SELECT is
Use AV to select
incorrect.
AV2, DV, etc.)
input
channel
(AV1,
recorder is not shown
on
TV
screen.
67
REF NC
Troubleshooting (Continued)
Can't
The disc
play a disc
using this
recorded
recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
(page 29)
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
be RW
player must
play it.
compati-
ble in order to
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
successfully.
remaining
blank space
The
source
copy
you
are
trying
to record is
setting
the
channel is tuned
When
recording
recording channel,
the TV's
on
to
a
is not
own
Video mode
programs that are copy-once
cannot be recorded.
recording
possible.
You cannot record the
source.
Select the channel
the recorder's
protected.
When
Timer
the disc
on
is insufficient.
the
tuner.
Use
disc,
protected
on
built-in TV tuner.
a
VR mode formatted disc for copy-
material.
once
Clock in recorder is not set to correct
Set clock to correct time. See "Auto
time.
Clock Set"
or
"Manual Clock Set"
on
page 22.
Timer has been
programmed
Reprogram
Recording"
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
present.
light does
programming timer.
not
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 49.
on
Timer.
mat.
The recorder A/V Out
nected to TV A/V In
jacks
jacks.
are
not
con-
Make A/V connections. Stereo is
available
via A/V
only
output from the
recorder.
The recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
The recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 48.
The remote control
The remote control is not
does not work
remote
properly.
sensor
pointed
at the
of the recorder.
Point the remote control at the remote
sensor
The remote control is too far from the
of the recorder.
Operate
the remote control within 7
m.
recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
remote control and the recorder.
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
When the recorder is moved from
warm
?
Under
In locations where moisture condensation may
can occur:
a
cold
place
to
a
?
extremely
Keep
the recorder
humid conditions.
?
When condensation has
for the recorder to
68
plugged
with POWER On. This will
place.
dry
into
an
occur:
AC power outlet
condensation.
help prevent
occurred, wait
before
using
it.
a
few hours
Specifications
General
Power
AC
Power
40W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
430 X 69 X 377
6.4
mm
(w
x
h
x
d)
without foot
kg
5˚C to 35˚C
5 % to 90 %
PAL I colour
system
Recording
format
PAL
Recording
format
DVD Video
system
Recording
DVD-VIDEO
Recording,
(80GB), DVD-RW (DVD-Re-recordable), DVD-R (DVD-Recordable)
DVD: Approx. 1 hour (HQ mode), 2 hours (SQ mode), 4 hours (LQ mode)
HDD: Approx. 20 hour (HQ mode), 40 hours (SQ mode), 80 hours (LQ mode)
Recordable media
HDD
Recordable time
Video
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2
(VBR support)
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
Hz to 20 kHz
Inputs
AERIAL IN
Aerial
input, 75 ohms
Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBm morethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (i.LINK/IEEE 1394 standard)
VIDEO IN
1.0
AUDIOIN
DV IN
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
S-VIDEO OUT
COMPONENT VIDEO OUT /
PROGRESSIVE SCAN
Audio
output (digital audio)
output (optical audio)
Audio output (analog audio)
Audio
x
1
/ SCART
Accessory:
Scartcable.............................1
Videocable.....................1
Audiocable(L,R)........................1
RFCoaxialCable................1
Remotecontrol..........................1
Batteries.......................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
symbol
are
trade-
Laboratories.
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
69
REF NC
Technology with the
human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
the
provide
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
obliged
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
does not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 01753 500470
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RD0013R
Download PDF