LG | CM3370 | LG CM3370 Owner’s Manual

OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
CM3370 (CM3370, CMS3370F)
*MFL69825506*
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION concerning the Power cord
Most appliances recommend they should be placed
upon a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.
Getting Started
3
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
0
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste. It is
recommended that you use local, free reimbursement
systems batteries and accumulators. The battery
shall not be exposed to excessive heat such as
sunshine, fire or the like.
4
Table of Contents
Table of Contents
1
Getting Started
3Operating
2
4
6
7
7
7
7
8
10
12
13
Safety Information
Table of Contents
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front Panel
Top Panel
Rear Panel
17
17
17
18
19
19
19
20
2Connecting
14
14
15
15
15
16
16
Connecting to speakers
– Connecting the speakers to the unit
Optional Equipment Connection
– USB Connection
– AUX IN Connection
– PORT. IN Connection
– Listening to music from your portable player
or external device
Basic Operations
– CD/USB Operations
– Auto Play
– TAPE Operations
Other Operations
– Programmed Playback
– Deleting Programmed list
– Searching for a folder and an MP3/WMA
file
20 – Deleting a file/folder or format
21 – AUTO DJ
21 – Turn off the sound temporarily
22 Using a BLUETOOTH® wireless technology
22 – Listening to music stored on the
BLUETOOTH devices
24 Radio Operations
24 – Listening to the radio
24 – Improving poor FM reception
24 – Presetting the Radio Stations
24 – Deleting all the saved stations
25 – Seeing information about a Radio station
26 Sound adjustment
26 – Setting the sound mode
27 Advanced Operations
27 – Recording to USB
29 Setting the Clock
29 – Using your player as an alarm clock
30 – Sleep Timer Setting
30 – Dimmer
30 – DEMO
30 – Auto power down
31 – AUTO POWER On
31 – Auto function change
Table of Contents
4Troubleshooting
32
5
1
Troubleshooting
5Appendix
33 Main unit
34 Speakers
35Maintenance
35 – Handling the Unit
35 – Notes on Discs
36 Trademarks and Licenses
2
3
4
5
6
Getting Started
Unique Features
1
BLUETOOTH®
Getting Started
Listens to music stored on your Bluetooth device.
AUTO DJ
Blends the end of one song into the beginning of
another for seamless playback.
USB Direct Recording
Records music to your USB device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
TAPE
Cassette tapes can be played back in this unit.
Getting Started
7
Playable file
Requirement
Compatible USB Devices
Music file requirement
yy The
USB function of this unit does not support all
USB devices.
MP3/WMA file compatibility with this unit is limited
as follows.
USB device requirement
yy Bit
rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Data CD : 999 / USB : 2,000
yy USB
Flash Drive :
Devices that support USB2.0 or USB1.1.
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy Maximum folders : Data CD : 99 / USB : 200
yy For a large capacity USB, it may take a few minute
to be searched.
yy File extensions : “.mp3”/“.wma”
yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy CD-ROM file format : ISO 9660/JOLIET
yy Using NTFS file system is not supported.
(Only FAT(16/32) file system is supported.)
yy We
recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
yy This unit recognizes up to 2,000 files.
yy External HDD, card readers, locked devices, or hard
type USB devices are not supported.
yy USB port of the unit cannot be connected to the
PC. The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy MP3 Player : Flash type MP3 player.
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Power) : Turns the power on or off.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
1
Getting Started
F (Function) : Selects the function and input source.
Input source / Function
Disc
USB
AUX input
Portable input
Bluetooth
TAPE
Radio
Display
CD
USB
AUX
PORTABLE
BT
TAPE
FM
(Mute) : Mutes the sound.
PRESET/FOLDER W/S :
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET/FOLDER
W/S to select the folder you want to play.
-- Chooses a preset number for a radio station.
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert the batteries with 4 and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
PROGRAM/MEMORY :
-- Stores radio stations.
-- Creates a programmed list you want to listen to.
-- Deletes all the saved stations.
TUNING -/+ : Selects the radio stations.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 21 )
dM (Play/Pause) :
-- CD/USB starts or pauses playback.
-- Selects stereo/mono.
DELETE :
-- Deletes MP3/WMA files. (USB only).
-- Deletes a song on the programmed list.
SOUND EFFECT : Chooses sound impressions.
REPEAT : Listens to your tracks/files repeatedly or
randomly.
BASS BLAST : Selects BASS BLAST effect.
C/V (Skip/Search) :
-- CD/USB skips fast backward or forward.
-- Searches for a section within a track/file.
DISC SKIP : Chooses a desired disc.
Z (Stop) :
-- CD/USB stops playback.
-- Cancels DELETE function.
USB REC : Records to USB.
INFO :
-- Sees information about your music. An MP3 file
often comes with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-- Sees the name of connected Bluetooth device in
Bluetooth mode.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
RDS/SET :
-- RDS (Radio Data System)
-- Confirms the setting.
CLOCK : Sets a clock and checks a time.
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
PTY : Searches radio stations by radio type.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
10 Getting Started
Front Panel
1
Getting Started
a
k
l
b
m
c
n
d
o
e
p
f
q
g
r
h
s
i
t
u
j
Getting Started 11
a1 (Power)
Turns the power on or off.
bDisplay window
cCD
Selects the CD function.
e AUX
Selects the AUX function.
f PORT.
Selects the PORTABLE function.
gAUTO DJ
Selects the AUTO DJ mode.
h USB Port
You can play sound files by connecting the USB
device.
i DISC SKIP
Chooses a desired disc.
o
Selects the Bluetooth function.
p FM
Selects the FM function.
q TAPE
Selects the TAPE function.
rR (Record)
Records to USB.
s I (Stop)
-- CD/USB stops playback.
-- Cancels DELETE function.
jPORT. (Portable) IN jack
Connect a portable device.
T (Play/Pause)
CD/USB starts or pauses playback.
kSOUND EFFECT
Selects sound effect mode.
PRESET +/Selects preset numbers.
Y/ U (Skip/Search)
-- CD/USB searches backward or forward.
-- Skips to the previous/next track/file.
mCLOCK
Sets a clock and checks a time.
TUNING +/Selects the radio station.
ALARM
With the ALARM function you can turn on CD,
USB play and Tuner reception at a desired time.
Volume Knob
Adjusts volume of speaker.
lBASS BLAST
Selects BASS BLAST effect.
SET
Confirms the setting.
STEREO/MONO
Selects stereo/mono.
SLEEP/DEMO
-- Sets the system to turn off automatically at a
specified time.
-- In power off status, if you press SLEEP/
DEMO, show demo mode.
t R (Open/Close)
Opens or closes the disc tray.
u Disc tray
1
Getting Started
d USB
Selects the USB function.
n MEMORY/REPEAT
-- Stores radio stations.
-- Deletes all the saved stations.
-- Makes programmed list.
-- Listens to your tracks/files repeatedly or
randomly.
12 Getting Started
Top Panel
1
a
Getting Started
a
(Play)
TAPE starts playback.
b
(Rewind)
TAPE searches backward.
c
(Fast forward)
TAPE searches forward.
d
(Stop/Open)
-- TAPE stops playback.
-- In stop state, opens the cassette tape door.
e (Pause)
TAPE pauses playback.
b c
d
e
Getting Started 13
Rear Panel
1
Getting Started
a
b
c
d
a POWER IN
b FM ANTENNA
c AUX IN (L/R)
dSPEAKERS (L/R) terminals
14 Connecting
Connecting to speakers
Connecting the speakers to the
unit
2
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connecting
Connect the black of each wire to the terminals
marked - (minus) and the other end to the terminals
marked + (plus).
>> Caution
yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
yy Check the volume level before playing music
to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yy Be careful to make sure children do not put
their hands or any objects into the *speaker
duct.
* speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure)
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
Connecting 15
Optional Equipment
Connection
USB Connection
AUX IN Connection
Connect an output of auxiliary device(Camcorder, TV,
Player, etc) to the AUX IN(L/R) connector.
If your device has only one output for audio(mono),
connect it to the left(white) audio jack on the unit.
Connect a USB device to the USB ports on the unit.
2
Connecting
Red
White
To the audio output jacks
of your component
(Camcorder, TV, Player, etc.)
,, Note
Removing the USB device from the unit.
1. Choose a different function/mode or
press Z on the remote control or I on
the unit twice in a row.
2. Remove the USB device from the unit.
16 Connecting
PORT. IN Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
2
Connecting
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1.
3.Press F on the remote control to select AUX or
PORTABLE function.
4. Turn on the portable player or external device and
start it playing.
Portable cable
MP3 player etc.
Operating 17
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B on the remote
control or R on the unit.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing F on the
remote control.
3. On CD function, select the disc by pressing DISC
SKIP.
To
Press Z on the remote control or
I on the unit.
Playback
Press dM on the remote control or
T on the unit.
Pause
Press dM on the remote control or
T on the unit during playback.
Searching
for a section
within
a track/file
Press and hold C/V on the
remote control or Y/U on the
unit during playback and release it at
the point you want to listen to.
-- In stop status,
Press C/V on the remote
control or Y/U on the unit to
go to the next/previous track/file.
-- During playback,
Skipping to
the next/
previous
track/file
press V on the remote control or
U on the unit to go to the next
track/file.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous
track/file.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the track/file.
Press REPEAT on the remote
Playing
control or MEMORY/REPEAT on
repeatedly or the unit repeatedly during playback.
randomly Refer to the note for details about
the display change.
USB
MP3/WMA CD
AUDIO CD
RPT 1
RPT 1
RPT 1
RPT*DIR
RPT DIR
-
RPT ALL
RPT ALL
RPT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
*DIR : Directory
yy When you play programmed list, only RPT 1
and RPT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Auto Play
-- AUDIO/MP3/WMA CD is played automatically
after disc tray is open and then closed.
-- Automatically the unit switches to the CD
function if disc tray is opened and then closed
even when there is no disc in disc tray.
3
Operating
Stop
Do this
,, Note
yy The display changes in the following order.
18 Operating
TAPE Operations
Listening to cassette tapes
1.Press F on the remote control or TAPE on the
unit to select TAPE function.
2. Open a cassette tape door by pushing
the unit.
on
3. Load a cassette tape with the side you want to
play facing forward.
To
Do this
Stop
Press
3
Play
Press
on the unit.
Operating
Pause
Press
on the unit.
Rewind
Press
on the unit.
Fast forward
Press
on the unit.
,, Note
on the unit.
Even if you change the TAPE function to
another, TAPE function works but mutes the
sound.
Operating 19
Other Operations
Deleting Programmed list
Deleting function only works in the edit mode.
Programmed Playback
The program function enables you to store your
favorite files from any disc or USB device.
A program can contain 20 tracks/files for media.
On CD function, select the desired disc by pressing
DISC SKIP.
1.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit in stop
status.
2.Press C/V on the remote control or
Y/U on the unit to select a track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET/FOLDER W/S on the remote control
to select the program number.)
5.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit once
again.
To play the programmed list, press dM on the
remote control or T on the unit after you make
the list.
,, Note
When making or modifying the programmed
list, REPEAT mode is off.
2. Select a song by pressing PROGRAM/MEMORY
on the remote control or PRESET/FOLDER
W/S on the remote control repeatedly.
3.Press DELETE on the remote control while a
song is selected.
,, Note
yy Programmed list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
-- Unplugging the power cord.
yy Program is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
3
Operating
3.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit to save
and select a next track/file.
1.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit in stop
status.
20 Operating
Searching for a folder and an
MP3/WMA file
1.Press PRESET/FOLDER W/S on the remote
control repeatedly until a desired folder appears.
2.Press dM on the remote control or T on the
unit to play it. The first file of the folder will be
played.
yy CD/USB Folders/Files are recognized as
below.
3
You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2.-Deletes file : Select the file you want to delete
and select “DEL FILE” by pressing DELETE on
the remote control.
-Deletes folder : Select the folder you want to
delete and select “DEL DIR” by pressing DELETE
on the remote control.
,, Note
ROOT
Deleting a file/folder or format
-Formats USB : Select “FORMAT” by pressing
DELETE on the remote control to format the
USB device.
If you want to exit the current mode, Press Z on
the remote control or I on the unit.
FOLDER
FILE
FOLDER1
Operating
FOLDER3
FILE 5
3. To delete file/folder or format, press dM on the
remote control or T on the unit.
FILE 6
FILE 7
FOLDER4
FOLDER7
FILE 3
FOLDER8
FILE 8
FILE 9
FILE 10
FILE 4
>> Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
FOLDER2
FOLDER5
FILE 11
FILE 12
FOLDER6
FILE 13
FILE 14
FILE 1
FILE 2
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER1 FOLDER3
FOLDER7 FOLDER8 FOLDER5
FOLDER6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the CD/USB is “ROOT”.
Operating 21
AUTO DJ
Turn off the sound temporarily
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across tracks for uninterrupted
playback.
Press
Press AUTO DJ repeatedly, the display changes as
followings.
AUTO DJ RANDOM
AUTO DJ OFF
on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “ ” will appear in the display window.
To cancel it, press
on the remote control again or
change the volume level.
AUTO DJ SEQUENTIAL
Display
Window
Description
OFF
AUTO DJ OFF
-
RANDOM
AUTO DJ
RANDOM
The music is played
randomly on this
mode.
REPEAT
AUTO DJ
SEQUENTIAL
The music is played
repeatedly on this
mode.
,, Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using Z on the remote control or I
on the unit on AUTO DJ mode, AUTO DJ will
be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy During recording, AUTO DJ is not available.
yy Only AUTO DJ SEQUENTIAL is selected when
played programmed list.
3
Operating
Mode
22 Operating
Using a BLUETOOTH®
wireless technology
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
3
Operating
The sound may be interrupted when the connection
has interference from other electronic devices or you
connect a Bluetooth device from a different room.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yy Available Devices : Smart phone, MP3, Notebook,
etc.
yy Codec : SBC
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on the
BLUETOOTH devices
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG CM3370(XX)”.
,, Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG CM3370(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
3. When this unit has successfully connected with
your Bluetooth device, “PAIRED” will be appear
on the display window. After a short amount
of time, the Bluetooth device name will be
displayed.
,, Note
If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide
Operating 23
,, Note
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below:
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy To connect a new Bluetooth device,
disconnect the currently connected
Bluetooth device and connect a new
Bluetooth device.
3
Operating
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
24 Operating
Radio Operations
Listening to the radio
1.Press F on the remote control or FM on the unit
until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING -/+ on the remote
control or Y/U on the unit for about two
seconds until the frequency indication starts to
change, then release.
Scanning stops when the unit tunes in a station.
3
Or
Operating
Manual tuning :
Press TUNING -/+ on the remote control or
Y/U on the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating volume knob on the
unit repeatedly.
Improving poor FM reception
press dM on the remote control or STEREO/MONO
on the unit.
This will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1.Press F on the remote control or FM on the unit
until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or Y/U
on the unit.
3.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit.
A preset number will blink in the display window.
4.Press PRESET/FOLDER W/S on the remote
control or PRESET +/- on the unit to select the
preset number you want.
5.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET/FOLDER W/S on the remote control
or PRESET +/- on the unit.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the
remote control or MEMORY/REPEAT on the unit
for two seconds.
“ERASE ALL” will flash up on the unit display.
2.Press PROGRAM/MEMORY on the remote
control or MEMORY/REPEAT on the unit to
erase all the saved radio stations.
Operating 25
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control repeatedly to cycle through the
various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme type
by pressing RDS/SET on the remote control. The
display will show the last PTY in use. Press PTY one
or more times to select your preferred programme
type. Press and hold C/V. The tuner will
search automatically. When a station is found the
search will stop.
Operating
RT
3
26 Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
fields. The displayed items for the equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT.
On Display
3
Description
Operating
POP
CLASSIC
JAZZ
ROCK
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz
or classic concert.
AUTO EQ
Sets the sound
equalizer on the mode
that is the most similar
to the genre which is
included in the MP3
ID3 tag of song files.
BASS BLAST
Reinforces the treble,
bass and surround
sound effect.
STANDARD
You can enjoy
optimized sound.
,, Note
yy O
n some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yy M
aybe you need to reset the sound mode,
after switching the input, sometimes even
after the sound track changed.
yy By pressing BASS BLAST, you can directly
select BASS BLAST effect.
Operating 27
Advanced Operations
To select recording bit rate and speed
Recording to USB
2.Use C/V on the remote control to select
the bit rate.
Recording to USB - CD, AUX,
PORTABLE, FM
You can record a various sound source to USB.
(CD, AUX, PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function by pressing F on the remote
control.
All tracks/files recording - You can record to USB
after full stop status.
Programmed list recording - After showing the
programmed list, you can record it to USB.
(Refer to page 19)
3. Start the recording by pressing USB REC on the
remote control or R on the unit.
4. To stop recording, press Z on the remote control
or I on the unit.
Recording to USB - TAPE
You can record a various sound source to USB.
(TAPE)
1. Connect the USB device to the unit.
2. Select TAPE function by pressing F on the remote
control or TAPE on the unit.
3. Load a cassette tape with the side you want to
record facing forward.
4.Press
on the unit.
5. Start the recording by pressing USB REC on the
remote control or R on the unit.
6. To stop recording, press Z on the remote control
or I on the unit.
Pausing recording
During recording, press dM on the remote control or
T on the unit to pause recording.
Press it again to restart recording.
(Only AUX, PORTABLE, TAPE, FM)
3.Press USB REC on the remote control or R on
the unit again to select the recording speed.
4.Press C/V on the remote control to select
a desired recording speed :
(AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5.Press USB REC on the remote control or R on
the unit to finish the setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
3
Operating
One track/file recording - You can record to USB
after playing a track/file you want.
1.Press USB REC on the remote control or R on
the unit for longer than 3 seconds.
28 Operating
,, Note
yy You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/WMA CD Only)
yy During recording MP3/WMA, there is no sound.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
3
Operating
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “NO REC” is displayed on the
display window.
yy Multi card reader device or external HDD
cannot be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 2,000 files.
yy You cannot record in AUTO DJ mode.
yy In case of the unsupported MP3/WMA file,
the file recording may be stopped.
yy It’ ll be stored as follows.
AUDIO CD
MP3/WMA
$%@3&$
53"$,@
53"$,@
The other source*
* : AUX, PORTABLE, TAPE
Tuner
5IFPUIFSTUBUVT
1MBZPSQBVTFTUBUVT
Tuner : The current recording frequency is
shown.
Operating 29
Setting the Clock
Using your player as an alarm
clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK.
2. Press and hold ALARM.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
3.Press C/V on the remote control to
change the hours and minutes and press
RDS/SET to save.
4.Press RDS/SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6.Press RDS/SET.
7. Select the minutes by pressing C/V on
the remote control.
-- Press C/V to select a preset number
when you select tuner and then, press RDS/SET.
If there is no preset number, this step is skipped.
5.Press C/V on the remote control to
change the volume and press RDS/SET to save.
The clock icon “(“ shows that the alarm is set.
,, Note
yy If you set the clock, you can check the time
by pressing CLOCK even when the player is
turned off.
yy You can set alarm after you set the clock.
yy If you set the clock and alarm, you can check
the alarm icon “(“ and setting information
by pressing ALARM even when the unit is
turned off.
yy You can select ALARM on/off mode by
pressing ALARM.
3
Operating
8.Press RDS/SET.
4. Press C/V on the remote control to select
function and press RDS/SET to save.
30 Operating
Sleep Timer Setting
DEMO
Press SLEEP on the remote control or SLEEP/
DEMO on the unit repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
In the power off status, press SLEEP/DEMO on the
unit once. The unit will power on and display the each
of functions with demo sound in the display window.
To cancel the DEMO function, press SLEEP/DEMO
on the unit once more.
To cancel the sleep function, press SLEEP on
the remote control or SLEEP/DEMO on the unit
repeatedly until “SLEEP 10” appears, and then press
SLEEP on the remote control or SLEEP/DEMO on
the unit once again.
,, Note
3
You can check the remaining time before the
unit is turned off. Press SLEEP on the remote
control or SLEEP/DEMO on the unit. The
remaining time appears in the display window.
,, Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without
input key in 10 sec, the DEMO will
playback automatically.
Operating
Dimmer
Auto power down
Press SLEEP on the remote control or SLEEP/
DEMO on the unit once. The display window will
be darkened by half. To cancel it, press SLEEP on
the remote control or SLEEP/DEMO on the unit
repeatedly until dim off.
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turn itself off after six hours if the
main unit has been connected to another device
using the analog inputs.
Operating 31
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
Bluetooth
This unit recognizes input signals such as Bluetooth
and then changes suitable function automatically.
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected your
Bluetooth device.
When you try to connect Bluetooth
device
,, Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
yy If you have already paired with this unit,
automatically this unit can turn on by an
input source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled.
To activate it, turn on the unit.
,, Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
3
Operating
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected.
Play your music on the Bluetooth device.
32 Troubleshooting
Troubleshooting
Troubleshooting
Problem
Cause & Correction
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power.
No sound.
yy Check whether electricity failed. Check the condition by operating other
electronic devices.
yy Check whether you select right function. Press function button and check the
selected function.
yy Check to see if the speakers are connected to the unit correctly.
yy An unplayable disc is inserted. Insert a playable disc.
4
Troubleshooting
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to page 35)
yy The disc is inserted upside down. Place the disc with the label or printed side
facing upwards.
yy The antenna is positioned or connected poorly. Connect the antenna securely.
yy The signal strength of the radio station is too weak. Tune to the station manually.
Radio stations cannot be
yy No stations have been preset or preset stations have been cleared. (When being
tuned in properly.
tuned by scanning preset channels)
Preset some radio stations, see page 24 for details.
yy The remote control is too far from the unit. Operate the remote control within
about 7 m (23 feet).
The remote control does yy There is an obstacle in the path of the remote control and the unit. Remove the
obstacle.
not work properly.
yy The batteries in the remote control are exhausted. Replace the batteries with
new ones.
Appendix 33
Main unit
General
Power requirements
Refer to the main label.
Refer to the main label.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Approx. 272 mm x 336 mm x 393 mm
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs
Analog audio in (AUX IN)
2.0 Vrms (1 kHz, 0 dB), 75 Ω, RCA jack (L, R) x 1
Portable in (PORT. IN)
1.8 Vrms (3.5 mm stereo jack) x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz
System
60 to 20,000 Hz
Signal-to-noise ratio
80 dB
Dynamic range
80 dB
Bus Power Supply (USB)
5 V 0 500 mA
Amplifier (RMS Output power)
Total
200 W RMS
Front
100 W RMS X 2 (4 Ω at 1 kHz, 10 % THD)
5
Appendix
Frequency response
34 Appendix
Speakers
Front
Type
2 Way 2 Speaker
Impedance
4Ω
Rated Input Power
100 W RMS
Max. Input Power
200 W RMS
Dimensions (W x H x D)
Approx. 202 mm x 341 mm x 237.5 mm
yy Design and specifications are subject to change without notice.
5
Appendix
Appendix 35
Maintenance
Handling the Unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished. For details,
please contact your nearest authorized service
center.
5
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
36 Appendix
Trademarks and
Licenses
Bluetooth wireless technology is a system which
allows radio contact between electronic.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
The Bluetooth word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
5
Appendix
Download PDF