OWNER’S MANUAL Mini Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. MODEL CM8460 (CM8460, CMS8460F, CMS8460W) *MFL69385930* www.lg.com Copyright © 2017 LG Electronics. All Rights Reserved 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product. Getting Started CAUTION concerning the Power Cord The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain .readily accessible Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: No naked flame sources, such as lighted candles, should be placed on the apparatus. 1 Getting Started Check the specification page of this owner’s manual .to be certain of the current requirements 3 4 Getting Started Symbols 1 ~ Refers to alternating current(AC). 0 Refers to direct current(DC). Getting Started Refers to class II equipment. 1 Refers to stand-by. ! Refer to “ON” (power). Refers to dangerous voltage. Getting Started 5 1 Getting Started 6 Table of Contents Table of Contents 1 Getting Started 3Operating 2 8 8 8 9 9 10 12 13 Safety Information Unique Features Playable file Requirement – Music file requirement – Compatible USB Devices – USB device requirement Remote control Front panel Rear panel 18 18 19 19 2Connecting 14 14 14 14 15 15 16 16 17 How to Affix the Ferrite Core – Affix the Ferrite Core for power cord and speaker cables Connecting to speakers – Attaching the speaker light cables to the unit Optional Equipment Connection – AUX IN Connection – PORT. IN Connection – USB Connection – Antenna Connection 20 20 20 20 21 21 22 24 24 24 25 26 26 26 26 26 27 28 28 28 29 29 Basic Operations – CD/USB Operations – Auto Play – Selecting a folder and an MP3/WMA file – Deleting an MP3/WMA file Playback Effect – DJ EFFECT – SCRATCH Effect – AUTO DJ – DJ PRO Using BLUETOOTH® wireless technology Using the Music Flow Bluetooth App – About “Music Flow Bluetooth” App – Install “Music Flow Bluetooth” App onto Your Bluetooth Device – Activate Bluetooth with “Music Flow Bluetooth” App Radio Operations – Listening to the radio – Improving poor FM reception – Presetting the Radio Stations – Deleting all the saved stations – Seeing information about a Radio station Sound adjustment – Setting the sound mode – Setting the USER EQ Advanced Operations – Recording to USB Table of Contents 4Troubleshooting 31 32 32 32 32 – JUKE BOX Playback Other Operations – Turn off the sound temporarily – CHILDSAFE Mode – Displaying file information (ID3 TAG) 32 – DEMO 32 – Using Microphone 33 – VOICE CANCELLER 33 – KEY CHANGER 33 – LIGHTING effect 34 Setting the Clock 34 – Setting the Clock through “Music Flow Bluetooth” App 34 – Using your player as an alarm clock 35 – Sleep Timer Setting 35 – Dimmer 35 Auto power down 36 – AUTO POWER On 36 – Auto function change 37 LG Sound Sync 38 WIRELESS PARTY LINK Connection 7 1 39 Troubleshooting 39 – General 5Appendix 41 42 42 43 43 43 General specifications Speakers specifications Trademarks and Licenses Maintenance – Notes on Discs – Handling the Unit 2 3 4 5 8 Getting Started Unique Features 1 Bluetooth® Getting Started Listens to music stored on your Bluetooth device. Portable In Listens to music from your portable device. (MP3, Notebook, etc.) Playback effects Listens to music with various sound and playback effects. USB Direct Recording Records music to your USB device. Playable file Requirement Music file requirement MP3/WMA file compatibility with this unit is limited as follows. yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Maximum files : Data CD : 999 / USB : 2,000 yy Maximum folders : Data CD : 99 / USB : 200 yy File extensions : “.mp3”/ “.wma” Music Flow Bluetooth yy Certain MP3/WMA files may not be played depending on the type or format of the file. Music Flow Bluetooth is an App designed to let you take control of some of LG’s latest Audio devices. Refer to page 24. yy We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. yy CD-ROM file format : ISO 9660/ JOLIET The DTS is not supported. In case of DTS audio format, audio is not output. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista) Getting Started 9 Compatible USB Devices yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. USB device requirement yy Devices which require additional program installation when you have connected it to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minute to be searched. yy To prevent data loss, back up all data. yy If you use a USB extension cable or USB hub, the USB device is not recognized. yy Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.) yy This unit recognizes up to 2,000 files. yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported. yy USB port of the unit cannot be connected to PC. The unit cannot be used as a storage device. yy Some USB may not work with this unit. 1 Getting Started yy The USB function of this unit does not support all USB devices. 10 Getting Started Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Standby/On) : Switches the unit ON or OFF. B (Open/Close) : Opens and closes the disc tray. VOL (Volume) +/- : Adjusts speaker volume. 1 Getting Started F (Function) : Selects the function and input source. (Mute): Mutes the sound. PRESET·FOLDER W/S : -- Searches for a folder of MP3/WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET·FOLDER W/S to select the folder you want to play. -- Chooses a preset number for a radio station. JUKEBOX/MEMORY : -- Stores radio stations. -- Deletes all the saved stations. -- Selects JUKE BOX mode. -- Makes your favorites list. AUTO DJ : Selects the AUTO DJ mode. (For more information refer to page 21) DELETE : -- Deletes MP3/WMA files. (USB only) -- Deletes a song on the programmed list. Replacement of battery (R03 ) (R03) Remove the battery cover on the rear of the remote control, and insert the battery with 4 and 5 matched correctly. Getting Started 11 • • • • • • • • • • • • • • c• • • • • • • • • • • • • • REPEAT : Listens to your tracks/files repeatedly or randomly. 0 to 9 numerical buttons : Selects numbered tracks, files, or preset number. TUNING-/+ : Selects the radio stations. CLOCK : Sets a clock and checks a time. C/V (Skip/Search) : -- Skips Fast backward or Forward. ALARM : With the ALARM function you can turn CD, USB play and Tuner reception on at a desired time. -- Searches for a section within a track/file. • • • • • • • • • • • • • • d• • • • • • • • • • • • • • d/M (Play/Pause) : VOICE CANCELLER : You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. -- Starts or pauses playback. -- Selects STEREO/MONO. Z (Stop): -- Stops playback or recording. -- Cancels DELETE function. SOUND EFFECT : Chooses sound impressions. REGION EQ : Chooses region equalizer. INFO / SLEEP -- Sees informations about your music. An MP3 file often come with ID3 tag. The tag gives the Title, Artist, Album or Time information. -- Sees the name of connected all Bluetooth device in Bluetooth mode. -- In status of WIRELESS PARTY LINK Connection, device name of SLAVE unit appears in the MASTER unit and Device name of MASTER unit appears in the SLAVE unit. -- Press and hold to set the system to turn off automatically at a specified time. (Dimmer : The display window will be darkened by half.) DJ EFFECT : Selects DJ EFFECT mode. (Refer to page 20) RDS/SET : -- RDS (Radio Data System) -- Confirms the setting. KEY CHANGER ( / ) : Changes the key to suit your vocal range. DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound. PTY : Searches radio stations by radio type. USB REC : USB direct recording. 1 Getting Started • • • • • • • • • • • • • • b• • • • • • • • • • • • • • 12 Getting Started Front panel i 1 j k l m n Getting Started a e b f c g d h o p q a1/! (Standby/On) b DJ EFFECT Selects DJ EFFECT mode. (For more information refer to page 20). r s tu v mTREBLE Adjusts TREBLE sound level when setting USER EQ. cUSER EQ Selects the sound effect created by your own. nUSB 2 Port You can play or record sound files by connecting the USB device. dREGION EQ / BASS BLAST - Chooses region equalizer. - Press and hold to select BASS effect directly. oSCRATCH / DJ EFFECT CONTROL Turn clockwise or counterclockwise to make Scratch sound. / Adjust DJ EFFECT level. eUSB REC / DEMO Records to USB. / Shows Demo mode. pMIC (Microphone) 1 / 2 jack fSEARCH Moves to folder or file in selection mode. qI (Stop) / RDS - Stops playback or cancels DELETE function. - Radio Data System gOK Selects a folder when searching a file. T (Play/Pause) - Starts or pauses playback. - Selects Stereo/Mono. R (Open/Close) Opens and closes the disc tray. KEY CHANGER Enters vocal range adjustment mode. CLUB, DRUM, USER (DJ PRO) Selects CLUB, DRUM or USER sound effect to mix. 1, 2, 3, 4 (DJ PRO PAD) Press a desired sound pad. hLIGHTING / VOICE CANCELLER - Turns on/off the lighting effects. - You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. Press and hold to switch this mode on or off. iUSB 1 Port You can play or record sound files by connecting the USB device. jBASS Adjusts BASS sound level when setting USER EQ. kDisplay window lMASTER VOLUME Adjusts speaker volume. Getting Started 13 rDisc tray sMIC VOL (Microphone volume) / KEY CONTROL - Controls microphone’s volume. - Changes the key to suit your vocal range. 1 tPORT. (Portable) IN jack Getting Started uF (Function) / WIRELESS LINK - Selects the function and input source. - Press and hold for 3 seconds to select WIRELESS PARTY LINK mode. vY SEARCH U (Skip/Search) - Searches a folder or a file. - Searches for a section within a track/file. - Selects the radio stations. Rear panel a b aPower cord >>Caution yy Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply. yy Do not overload the extension cord with excessive electrical load. c d e bSPEAKERS connector cSPEAKER LIGHTING SYSTEM dANTENNA (FM) eAUX IN (L/R) 14 Connecting How to Affix the Ferrite Core 2 Connecting to speakers Connecting Ferrite core may not be provided depending on each nation’s regulations. Connect the speaker cable plugs to the SPEAKERS connector. Make sure to connect the speaker’s plug to the corresponding colored speaker connector when connecting the plug. Affix the Ferrite Core for power cord and speaker cables Attaching the speaker light cables to the unit You must affix a ferrite core in order to reduce or eliminate electrical interference. To connect the speaker light cable to the unit, insert the cable to SPEAKER LIGHTING SYSTEM connectors on the unit. 1. Pull the stopper [a] of the ferrite core to open. 2. Wind the power cord around the ferrite core once. Wind the SPEAKERS cables around the ferrite core once. Wind the SPEAKER LIGHTING SYSTEM cables around the ferrite core once. 3. Close the ferrite core until it clicks. >>Caution yy Make sure that the jacks and the speakers are matched correctly. yy Make sure to connect the cables to connectors tightly on the unit. Connecting 15 >>Caution yy Do not try to lift the speaker alone. It needs two persons to lift the speaker. Otherwise it may result in the speaker malfunction and cause personal injury and/or property damage. yy When you connect the speakers to the unit, make sure to connect the speaker’s cable and plug to the corresponding speaker connector. AUX IN Connection Connect an output of auxiliary device (Camcorder, TV, Player, etc) to the AUX IN (L/R) connector. If your device has only one output for audio (mono), connect it to the left audio jack on the unit. yy Do not use the unit in a limited space. It may damage a person’s hearing. It is recommended to use it in a wide space. yy Be careful to make sure children not to put their hands or any objects into the opening speaker duct hole. yy Use the speaker supplied with this unit only. Using any other speaker may cause malfunction. White Audio cable Red yy The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor. yy Avoid looking at the speaker lights for a long time. It may cause damage to eyesight. yy Do not press the diaphragm or the dust cap of the speaker. DVD, Blu-ray player etc. 2 Connecting yy Check the volume level before playing music to prevent infirm, child, and pregnant women from being shocked by the sudden and loud sound from the unit. Optional Equipment Connection 16 Connecting PORT. IN Connection USB Connection Connect an output (earphone or line out) of portable device (MP3 or PMP etc) to the PORT. IN connector. Connect a USB device (or MP3 player, etc.) to the USB ports on the unit. USB device 2 Connecting Portable cable ,,Note Removing the USB device from the unit : 1. Choose a different function/mode or press Z on the remote control or I on the unit twice in a row. 2. Remove the USB device from the unit. MP3 player etc. Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external device. 1. Connect the portable player to the PORT. IN connector of the unit. Or Connect the external device to the AUX IN connector of the unit. 2. Turn the power on by pressing 1 on the remote control or 1/! on the unit 3.Press F on the remote control or F / WIRELESS LINK on the unit to select AUX or PORTABLE Function. 4. Turn on the portable player or external device and start it playing. ,,Note Automatically switches to the PORTABEL function when you connect the portable device to the PORT. IN connector. Connecting 17 Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM wire antenna to the FM antenna connector. FM antenna 2 Connecting ,,Note Be sure to fully extend the FM wire antenna. 18 Operating Basic Operations To -- In stop status, Press C/V on the remote control or rotate Y SEARCH U on the unit to go to the next/previous track/file. CD/USB Operations 1. Insert the disc by pressing B on the remote control or R on the unit. Or connect the USB device to the USB port. 2. Select CD or USB function by pressing F on the remote control or F / WIRELESS LINK on the unit. To Stop 3 Playback Operating Pause Do this Press Z on the remote control or I on the unit. Press d/M on the remote control or T on the unit. Press d/M on the remote control or T on the unit during playback. - On the remote control Press and hold C/V on the Searching remote control during playback and for a section release it at the point you want to within a track/ listen to. file - On the unit Press SEARCH and then rotate Y SEARCH U during playback. Selecting a track/file directly Press 0 to 9 numerical buttons on the remote control to go to the desired file or track directly. Do this -- During Playback, (1) By using C/V buttons : Skipping to the next/ previous track/file Press V on the remote control to go to the next track/file. Playing less than 2 seconds, press C on the remote control to go to the previous track/file. Playing after 3 seconds, press C on the remote control to go to the beginning of the track/file. (2) By using SEARCH : Rotate Y SEARCH U on the unit and press d/M to play the track/ file. Playing Press REPEAT on the remote repeatedly or control repeatedly. Refer to the note randomly for details about the display change. ,,Note yy The display changes in the following order. USB MP3/WMA CD AUDIO CD RPT 1 RPT 1 RPT 1 RPT*DIR RPT DIR - RPT ALL RPT ALL RPT ALL RANDOM RANDOM RANDOM OFF OFF OFF *DIR : Directory yy When you play JUKE BOX list, only RPT 1 and RPT ALL are available. yy Even after restarting the unit or switching one function to another, you can listen to music from the point where it’s last been played. yy If you leave the disc tray open for 5 minutes, it will close automatically. Operating 19 Auto Play -- AUDIO/MP3/WMA CD is played automatically after Disc tray is open and then closed. -- Automatically switches to the CD function if Disc tray is open and then closed when there is no disc in Disc tray. ,,Note yy CD / USB Folders/Files are recognized as below. * Selecting a folder and an MP3/WMA file On the unit 1.Press SEARCH and rotate Y SEARCH U until a desired file appears in stop status. You can also search a folder if you press SEARCH again. 3 Operating 2.Press OK or T to play the selected file. When you search a folder, press OK to select a file in the folder, then press OK or T again. The selected file is played. On the remote control 1.Press PRESET·FOLDER W/S on the remote control repeatedly until a desired folder appears. 2.Press d/M to play it. The first file of folder will play yy If there is no file in a folder, the folder will not appear. yy Folders will be presented as the following order; ROOT FOLDER 1 FOLDER 3 FOLDER 7 FOLDER 8 FOLDER 5 FOLDER 6 yy File will be played from $ file No.1 to $ file No.14 one by one. yy Files and folders will be presented in order recorded and may be presented differently according to the record circumstances. yy *ROOT : The first screen you can see when a computer recognize the USB is “ROOT”. 20 Operating Deleting an MP3/WMA file You can delete file, folder or format by pressing DELETE. This function is supported only in stop status. (USB only) 1. -Select the file you want to delete and press DELETE. -Select the folder you want to delete by pressing PRESET·FOLDER W/S on the remote control and press DELETE. -Press and hold DELETE to format the USB device. Or 3 Press DELETE repeatedly during selecting the MP3/WMA file. Operating The display changes in the following order. - DEL FILE : Deletes file - DEL DIR : Deletes folder - FORMAT : Formats USB 2. To delete file/folder or format, press d/M on the remote control or press T on the unit. If you want to exit the current mode, press Z on the remote control or press I on the unit. >>Caution yy Do not extract the USB device during operation. (play, delete, etc.) yy Regular back up is recommended to prevent data loss. yy The delete function may not be supported according to the USB status. (lock, etc.) Playback Effect The unit supports various sound and playback effects : DJ EFFECT, SCRATCH, DJ PRO, AUTO DJ. DJ EFFECT It allows you to enjoy DJ EFFECT such as Flanger/ Phaser/Wah/Delay sound effect. 1. Press DJ EFFECT to select a desired DJ EFFECT (FLANGER, PHASER, WAH, DELAY, OFF). 2. Turn SCRATCH / DJ EFFECT CONTROL clockwise or counterclockwise to adjust the DJ EFFECT level between 0 to 15. ,,Note yy The DJ EFFECT mode is displayed for 3 seconds when a DJ EFFECT Key is inputted. yy The current gage level is displayed when adjusting gage. yy If the function changed or the unit is turned off and on, DJ EFFECT mode with DJ EFFECT is turned off. SCRATCH Effect You can output and mix the sound effects of the SCRATCH. Rotating SCRATCH / DJ EFFECT CONTROL to mix the scratch sound. -- You can hear effect of scratch sound depending on the direction in which you rotate SCRATCH / DJ EFFECT CONTROL. Operating 21 AUTO DJ DJ PRO Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks/files for uninterrupted playback. It allows you to mix CLUB, DRUM or USER sound effect. Each mode has up to 4 sounds effect. Press AUTO DJ on the remote control repeatedly, the display changes as followings. AUTO DJ RANDOM -> AUTO DJ SEOUENTIAL -> AUTO DJ OFF 2. Press a DJ Pro. Pad (1, 2, 3, 4) of desired sound. 1. Press and hold DJ PRO (CLUB, DRUM or USER) to select a desired DJ PRO sound effect. ,,Note Display Window Description OFF AUTO DJ OFF - RANDOM AUTO DJ RANDOM The music is played randomly on this mode. yy DJ Pro mode is displayed for 3 seconds when you press DJ PRO (CLUB, DRUM or USER). REPEAT AUTO DJ SEQUENTIAL The music is played repeatedly on this mode. ,,Note yy AUTO DJ mode does not support searching for a section within a track/file or to play repeatedly or randomly. yy If you move to other functions or stop the music using I on the unit (or Z on the remote control) on AUTO DJ mode, AUTO DJ will be disable. yy AUTO DJ is not supported in the music file whose length is less than 60 seconds. yy During recording, AUTO DJ is not available. yy Only AUTO DJ SEQUENTIAL is selected when played JUKE BOX list. yy Initial DJ Pro mode is CLUB sound effect. yy The DJ PRO sound is mixed when you press a DJ Pro. Pad (1, 2, 3, 4). yy The currently playing DJ PRO sound is stopped and the selected DJ PRO sound outputs if you press a different DJ Pro. Pad (1, 2, 3, 4) while DJ PRO sound is playing. 3 Operating Mode yy If you want to use USER, you have to register a source with “Music Flow Bluetooth” app. If the source is not register to USER, “EMPTY” or “NO SOUND” appears on the display window. 22 Operating Using BLUETOOTH® wireless technology Listening to music stored on the Bluetooth devices About Bluetooth Before you start the pairing procedure, make sure the Bluetooth feature is activated on your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the Bluetooth in the other rooms. 3 Operating Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA. Bluetooth Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) Codec : SBC Pairing your unit and Bluetooth device 1. Turn on the unit. 2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG CM8460(XX)”. ,,Note yy XX means the last two digits of Bluetooth address. For example, if your unit has a Bluetooth address such as 9C:02:98:4A:F7:08, you will see “LG CM8460(08)” on your Bluetooth device. yy Depending on the Bluetooth device type, some devices may have a different pairing process. Enter the PIN code (0000) as needed. yy You can connect this unit with up to 3 Bluetooth devices simultaneously using the same method as described above, only in the Bluetooth function. yy The multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be supported depending on the connected device specifications.) yy Removable/detachable Bluetooth devices (Ex: Dongle etc.) will not support multi pairing. 3. When this unit is successfully connected with your Bluetooth device, “PAIRED” appears on the display window and change to Bluetooth device name soon. Then “BT” will be appeared on the display window. Operating 23 ,,Note yy "PAIRED" will momentarily appear on the display when you connect other devices for multi pairing. yy If the device name is unavailable, “_” will be displayed. 4. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide. ,,Note -- There is a obstacle between the unit and the Bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yy The sound may be interrupted when the connection has interference from other electronic devices. yy You may not control the Bluetooth device with this unit. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy You can enjoy wireless system using phone, MP3, Notebook, etc. yy The more distance between the unit and the Bluetooth device, the lower the sound quality becomes. yy Bluetooth connection will be disconnected when the unit is turned off or the Bluetooth device gets far from the unit. yy When Bluetooth connection is disconnected, connect the Bluetooth device to the unit again. yy You should connect your Bluetooth device to this unit again when you restart it. yy When a Bluetooth device is not connected, “BT READY” appears on the display window. yy Even if this unit connected up to 3 Bluetooth devices in the Bluetooth mode, you can play and control music by using only one of the connected devices. yy When you use the BT function, adjust the volume to a proper level on the Bluetooth device. Controls connected Bluetooth device You can control connected Bluetooth device by the unit; play, pause, stop, skip. ,,Note yy Only Android OS and iOS is available to use this function. yy This function may not be supported depending on the Bluetooth device, or operated differently. yy If it is not in the BT function, only one device can be connected. yy If a Bluetooth device is connected when using LG TV, LG TV is disconnected and the Bluetooth device is connected. yy When you connect Bluetooth device (iOS device etc.) to this unit or operate the device, the volume level can be synchronized with each other. 3 Operating yy When using Bluetooth® technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance. However, it may not work well in certain situations as described below : ,,Note yy When this unit connected with multiple Bluetooth devices, only one device which you are playing keeps Bluetooth connection when you change the function to the others. 24 Operating Using the Music Flow Bluetooth App ,,Note yy Only Android OS is available to use “Music Flow Bluetooth” app with this unit. yy It is recommended to use the latest version of app. 3 About “Music Flow Bluetooth” App ,,Note yy Make sure that your Bluetooth device is connected to the Internet. yy Make sure that your Bluetooth device has a scanning software application. If you don’t have one, download one from “Google Android Market (Google Play Store)”. yy Depending on the area, QR code may not work. Install “Music Flow Bluetooth” App through “Google Android Market (Google Play Store)” Operating “Music Flow Bluetooth” app brings a suite of new features to this unit. 1. Tap the “Google Android Market (Google Play Store)” icon. To enjoy more features, you are recommended to download and install free “Music Flow Bluetooth” app. 2. In the search bar, type in the “Music Flow Bluetooth” and search it. Here is introduce a few of the many features of “Music Flow Bluetooth” app. Multi Juke box : Your entertainment increases three fold when you connect up to 3 Bluetooth phones at the same time. Play music from all three phone and create a customized playlist from all the phones. Sampler Creator : Record effects on your smartphone and very simply sync them via Bluetooth to the system. Be as creative as you can be. Install “Music Flow Bluetooth” App onto Your Bluetooth Device There are two ways to install “Music Flow Bluetooth” App onto Your Bluetooth Device. Install “Music Flow Bluetooth” App through QR code 1. Install “Music Flow Bluetooth” app through QR code. Use the scanning software to scan the QR code. 2. Tap an icon for installation. 3. Tap an icon for downloading. 3. In the search result list, find and tap “Music Flow Bluetooth” to start downloading Bluetooth app. 4. Tap an icon for installation. 5. Tap an icon for downloading. ,,Note yy Make sure that your Bluetooth device is connected to the Internet. yy Make sure that your Bluetooth device is equipped with “Google Android Market (Google Play Store)”. Operating 25 Activate Bluetooth with “Music Flow Bluetooth” App “Music Flow Bluetooth” app helps to connect your Bluetooth device to this unit. 1. Tap “Music Flow Bluetooth” app icon on the home screen to open “Music Flow Bluetooth” app, and go to the main menu. 2. Tap [Menu] and select the unit you want. 3. If you want to get more information to operate, tap [Help] on the [Setting] menu. ,,Note yy “Music Flow Bluetooth” app will be available in the software version as follow; yy If you use “Music Flow Bluetooth” app for operation, there would be some differences between “Music Flow Bluetooth” app and the supplied remote control. Use the supplied remote control as necessary. yy Depending on the Bluetooth device, “Music Flow Bluetooth” app may not work. yy After connection of “Music Flow Bluetooth” app, music may be output from your device. In this case, try connecting procedure again. yy If you operate the other applications or change the settings on your Bluetooth device while using “Music Flow Bluetooth” app, “Music Flow Bluetooth” app may operate abnormally. yy When “Music Flow Bluetooth” app operates abnormally, check your Bluetooth device and the connection of “Music Flow Bluetooth” app and then try to connect again. yy Depending on the smart phone's operating system, you have some differences for “Music Flow Bluetooth” operation. yy Check Bluetooth setting on your Bluetooth device if “Music Flow Bluetooth” app connection does not work well. 3 Operating -- Android O/S : Ver 4.0.3 (or later) 26 Operating Radio Operations Presetting the Radio Stations Be sure that both FM aerials are connected. (Refer to page 17) Before tuning, make sure to turn down the volume. Listening to the radio 1.Press F / WIRELESS LINK on the unit or F on the remote control until FM appears in the display window. The last received station is tuned in. 3 Operating 2. Auto tuning : Press and hold TUNING-/+ on the remote control for about two seconds until the frequency indication starts to change, then release. Or press SEARCH and then rotate Y SEARCH U on the unit. Scanning stops when the unit tunes in a station. Or Manual tuning : Press TUNING-/+ on the remote control repeatedly or rotate Y SEARCH U on the unit. 3. Adjust the volume by rotating volume knob on the unit or by pressing VOL +/- on the remote control repeatedly. Improving poor FM reception Press T on the unit or d/M on the remote control. This will change the tuner from stereo to mono and usually improve the reception. You can preset 50 stations for FM. 1.Press F / WIRELESS LINK on the unit or F on the remote control until FM appears in the display window. 2. Select the desired frequency by pressing TUNING -/+ on the remote control or by rotating Y SEARCH U on the unit. 3.Press JUKEBOX/MEMORY on the remote control. A preset number will blink in the display window. 4.Press PRESET·FOLDER W/S on the remote control to select the preset number you want. 5.Press JUKEBOX/MEMORY on the remote control. The station is stored. 6. Repeat steps 2 to 5 to store other stations. 7. To listen a preset station, press PRESET·FOLDER W/S or 0 to 9 numerical buttons on the remote control. Deleting all the saved stations 1. Press and hold JUKEBOX/MEMORY on the remote control for two seconds. “ERASEALL” will flash up on the unit display. 2.Press JUKEBOX/MEMORY on the remote control to erase all the saved radio stations. Operating 27 Seeing information about a Radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS/SET on the remote control repeatedly to cycle through the various data types: PS (Programme Service Name) The name of the channel will appear in the display. PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display. (Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display. CT (Time controlled by the channel) This shows the time as broadcast by the station. You can search the radio stations by programme type by pressing RDS/SET on the remote control. The display will show the last PTY in use. Press PTY one or more times to select your preferred programme type. Press and hold C/V. The tuner will search automatically. When a station is found the search will stop. Operating RT 3 28 Operating Sound adjustment Setting the sound mode This system has a number of pre-set surround sound fields. The displayed items for the Equalizer may be different depending on sound sources and effects. ,,Note yy On some speakers, sound may not be heard or heard in low sound depending on the sound mode. yy By pressing and holding REGION EQ / BASS BLAST for 3 seconds on the unit you can directly select BASS (BASS BLAST) effect. You can select a desired sound mode by using SOUND EFFECT on the remote control. On Display 3 BASS (BASS BLAST) Operating POP CLASSIC ROCK JAZZ Description Reinforces the treble, bass and surround sound effect. This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, jazz or classic concert. FOOT BALL You can enjoy the sound effect FOOTBALL STADIUM. STANDARD You can enjoy optimized sound. You can select a desired sound mode by using REGION EQ on the remote control. On Display Region FUNK, REGUETON, SAMBA, BANDA, MERENGUE, AXE, Latin SALSA, SERTANEJ, America CUMBIA, TECNO BR, FORRO ARABIC DANGDUT Description Optimized sound effect for the Middle East music genre prefered in Indonesia each region. AFRO Africa INDIA India Setting the USER EQ You can adjust the sound level of Bass and Treble as your preference. 1.Press USER EQ on the unit. “USER EQ” is displayed. 2. Rotate BASS or TREBLE to adjust the sound level. 3.Press USER EQ to save the setting. Operating 29 Advanced Operations Recording to USB You can record a various sound source to USB. (CD, AUX, PORTABLE, FM, USB) 1. Connect the USB device to the unit. 2.Press F / WIRELESS LINK on the unit or F on the remote control to select a Function you want to record. One track/file recording - You can record to USB after playing a track/file you want. All tracks/files recording - You can record to USB in full stop status. 3. Start the recording by pressing USB REC. -If you connect both USB1 and USB2, press USB REC when USB1 or USB2 which you want to record blinks in the display window. 4. To stop recording, press I on the unit or Z on the remote control. Pausing recording During recording, press T on the unit or d/M on the remote control to pause recording. Press it again to restart recording. (FM/AUX/PORTABLE only) ,,Note yy VOICE CANCELLER or KEY CHANGER will be reset, if you use recording function during operating VOICE CANCELLER or KEY CHANGER. yy VOICE CANCELLER or KEY CHANGER can not be operated during recording. 1. Press and hold USB REC for 3 seconds. 2. Press C/V on the remote control or rotate Y SEARCH U on the unit to select a bit rate. 3. Press USB REC to set. 4.Press C/V on the remote control or rotate Y SEARCH U on the unit to select a desired recording speed. (AUDIO CD only) X1 SPEED - You can listen to music while recording it. X2 SPEED - You can just record the music file. 5. Press USB REC to finish the setting. USB Copying You can copy audio files in USB 1 to USB 2. 1. Connect a USB device including desired sound files to USB port (1) and select USB 1 Function. 2. Connect another USB device to USB port (2). 3. Press USB REC to start recording. 4. To stop recording, press I on the unit or Z on the remote control. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights 3 Operating JUKE BOX list recording - After showing the JUKE BOX list, you can record it to USB. (Refer to page 31) To select recording bit rate and speed 30 Operating ,,Note yy You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/ WMA file or Audio CD Only) yy During recording MP3/WMA, there is no sound. yy For stable recording, the output sound level goes down on its own when you record music from CD to USB. yy You can only change volume level between MIN and 30 during recording. (Only CD function) 3 yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Except MP3/WMA files) Operating yy Do not remove the USB device or turn off the unit during USB recording. If does not, an incomplete file may be made and not deleted on PC. yy If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL”, “NOT SUPPORT” or “FILE MAX” is displayed on the display window. yy Multi card reader device or External HDD can not be used for USB recording. yy A file is recorded by about 512 Mbyte when you record for a long term. ,,Note yy You can record various sound using DJ EFFECT, SCRATCH, DJ PRO or MIC. (Except USB Copying) yy You can control recorded MIC sound according to MIC volume. yy You may not store more than 2000 files. yy You can not record in AUTO DJ mode. yy On CD function, sound of MIC, SCRATCH, DJ PRO or DJ EFFECT is recorded only during AUDIO CD X1 speed REC. It is recorded AUDIO CD source too. yy In case of the unsupported MP3/WMA file, the file recording may be stopped. yy It’ll be stored as follows. AUDIO CD MP3/WMA The other source* Tuner * : AUX and the like. Tuner : The current recording frequency is shown. Operating 31 JUKE BOX Playback Editing JUKE BOX JUKE BOX function enables you to make a playlist of your favorite tracks/files from a disc or USB device. A playlist of up to 100 tracks/files can be entered. 1. Press and hold JUKE BOX / MEMORY on the unit to enter the edit mode. Making JUKE BOX list It is supported only on stop status. 1. Press and hold JUKEBOX / MEMORY on the remote control to enter the edit mode. 2. Select a track/file by pressing C/V on the remote control or by turning Y SEARCH U on the unit. It is supported only on stop status. 2.Press PRESET·FOLDER W/S on the remote control to select a track/file to edit. 3.Press C/V on the remote control or or rotate Y SEARCH U on the unit 4.Press JUKE BOX / MEMORY. 5. Repeat 2 to 3 to store the other tracks/files. 6.Press JUKE BOX / MEMORY once again. To play the JUKE BOX list, press d/M after you edit the list. 4. Repeat steps 2 - 3 to store other tracks/files. (You can modify the list by pressing PRESET·FOLDER W/S on the remote control to select the JUKE BOX program number.) Deleting JUKE BOX list Deleting function only works in the edit mode. 5.Press JUKE BOX / MEMORY once again. 1. Press and hold JUKE BOX / MEMORY on the remote control to enter the edit mode. To play the JUKE BOX list, press d/M after you make the list. 2. Select a song by pressing PRESET·FOLDER W/S on the remote control repeatedly. ,,Note When making or modifying the JUKE BOX list, REPEAT mode is off. Enjoying JUKE BOX Press JUKE BOX / MEMORY once on stop status. “JUKE BOX ON” appears on the display window. To play JUKE BOX list, press d/M on the remote control or T on the unit. To cancel it, press JUKE BOX / MEMORY once. “JUKE BOX OFF” appears on the display window. 3.Press DELETE while a song is selected. ,,Note yy To check the status of JUKE BOX, press JUKEBOX / MEMORY once. yy If there is no JUKE BOX list, “JUKE BOX NONE” appears on the display window when you press JUKE BOX / MEMORY. yy JUKE BOX is switched off in the case below. -- Changing to a different function. -- Turning off and on the unit. -- Operating the numerical buttons on the remote control. -- Playing a file by using SEARCH and Y SEARCH U. yy JUKE BOX list is cleared in the case below. -- Removing the disc or the USB device. -- Deleting or recording music files in the USB device. 3 Operating 3.Press JUKE BOX / MEMORY to save the track/ file. 32 Operating Other Operations Turn off the sound temporarily Press on the remote control to mute your sound. You can mute your unit, for example, to answer the telephone, the “MUTE” will appear in the display window. To cancel it, press level. again or change the volume CHILDSAFE Mode 3 Operating This function helps to prevent you from being surprised when you turn on the unit in case that the volume of the unit is set at a high level. To turn on CHILDSAFE mode, press and hold OK on the unit when the volume of the unit is “MIN”. In CHILDSAFE mode, the volume increase gradually. To turn off CHILDSAFE mode, press and hold OK on the unit when the volume of the unit is “MIN” and this mode is turned on. ,,Note In case of CD, USB or BT function, CHILDSAFE mode does not work after about 2 minutes from power on the unit even if this mode is enabled. Displaying file information (ID3 TAG) While playing an MP3 file containing file information, you can display the information by pressing INFO / SLEEP. DEMO In the power off state, press DEMO / USB REC on the unit once. The unit will power on and display the each of functions with demo sound in the display window. To cancel the DEMO function, press DEMO / USB REC once more. ,,Note yy While in DEMO, this unit will keep DEMO status even if you unplug the power cord connection. yy You can enjoy other functions during the DEMO, the DEMO will temporarily pause. - Without input key in 10 sec, the DEMO will play back automatically. Using Microphone 1. Connect your microphone to the MIC jack. 2. Play the music you want. 3. Sing along with the accompaniment. Adjust the microphone volume by rotating MIC VOL / KEY CONTROL clockwise or counterclockwise on the unit. ,,Note yy When not using the microphone, set the MIC VOL / KEY CONTROL to minimum or turn off the MIC and remove the microphone from the MIC jack. yy If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC VOL / KEY CONTROL. yy If sound through the microphone is extremely loud, it may be distorted. In this case, rotate MIC VOL / KEY CONTROL to minimum. yy If your microphone’s sound feels not loud though MIC VOL is max, you can adjust only audio source volume lower. -- Follow below step. 1. Press and hold KEY CHANGER on the unit. 2. Reduce Audio Source Volume by rotating MASTER VOLUME counter-clockwise on the unit. To initialize it, power off. Operating 33 VOICE CANCELLER KEY CHANGER You can enjoy the function while playing the music, by reducing singer vocal of music in the various source. You can adjust the key to 9 steps (4 steps higher, 4 steps lower and the original key). Press and hold the LIGHTING / VOICE CANCELLER and “ON” will appear in display window. To cancel it, Press and hold LIGHTING / VOICE CANCELLER again. The quality of the VOICE CANCELLER may be different depending on the recording conditions of music files. ,,Note yy This function is available CD, USB or BT (Bluetooth) Function. yy This function is available to use only when a microphone is connected. yy If a microphone is not connected, “NOT SUPPORT” appears in the display window. yy It is not available on the MONO source. yy To initialize it, change the Function or disconnect the microphone. yy This function may not be initialized depending on the status of connected devices. 1. Set on the key changer by using the KEY CHANGER. 2. Adjusting the key by rotating the MIC VOL / KEY CONTROL. On the remote control yy To sharp the key one by one, press the KEY CHANGER( ) on the remote control repeatedly during playback. yy To flatten the key one by one, press the KEY CHANGER( ) on the remote control repeatedly during playback. ,,Note yy This function is available CD, USB or BT (Bluetooth) Function. yy If a microphone is not connected, “NOT SUPPORT” appears in the display window. yy To initialize it, change the Function, disconnect the microphone or change the music. yy This function may not be initialized depending on the status of connected devices. LIGHTING effect The function is to create a Club like atmosphere by operating speaker lighting. 1.Press LIGHTING / VOICE CANCELLER on the unit. OFF PEACEFUL ROMANTIC COOL UPBEAT FIERY EXCITED DYNAMIC HEALING SUNNY PARTY OFF ... ,,Note yy Lighting function is available in all functions. yy Lighting mode retains its previous mode when you first press LIGHTING / VOICE CANCELLER, press again to change modes. 3 Operating yy If the function is not available, “NOT SUPPORT” appears in the display window. On the unit 34 Operating Setting the Clock 1. Turn the unit on. 1. Turn the unit on. 2. Press and hold CLOCK. 2. Press and hold ALARM. 3. Select time mode by pressing C/V on the remote control. 3.Press C/V on the remote control to change the hours and minutes and press RDS/SET to save. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4.Press RDS/SET to confirm your selection. 5. Select the hours by pressing C/V on the remote control. 6.Press RDS/SET. 3 Using your player as an alarm clock 7. Select the minutes by pressing C/V on the remote control. Operating 8.Press RDS/SET. Setting the Clock through “Music Flow Bluetooth” App Install “Music Flow Bluetooth” app on your Android device. (Refer to page 24) Your unit’s clock will be automatically synchronized with your device by activating Bluetooth connection through “Music Flow Bluetooth” app. 4.Press C/V on the remote control to select function and press RDS/SET to save. - Press C/V on the remote control to select a memory No. when you select Tuner and then, press RDS/SET. If there is no memory No., this step is skipped. 5.Press C/V on the remote control to change the volume and press RDS/SET to save. ,,Note yy If you set the clock time, you can check the time by pressing CLOCK even when the player is turned off. yy You can set alarm after you set the clock time. yy If you set the clock time and alarm, you can check the alarm setting information by pressing ALARM even when the unit is turned off. yy You can select ALARM ON/OFF mode by pressing ALARM. Operating 35 Sleep Timer Setting 1. Press and hold INFO / SLEEP. The display window will be darkened by half. 2.Press INFO / SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off. To cancel the sleep function, press INFO / SLEEP repeatedly until “SLEEP 10” appears, and then press INFO / SLEEP once again while “SLEEP 10” is displayed. ,,Note yy You can check the remaining time before the unit is turned off. yy You can edit the remain time when displays the remaining time or “DIMMER”. Dimmer Press and hold INFO / SLEEP. The display window will be darkened by half. To cancel it, press and hold INFO / SLEEP and then press it repeatedly until dim off. ,,Note All the LED turns off when Dimmer is being operated. This unit will turn itself off to save electricity in the case were the main unit is not connected to an external device and is not used for 20 minutes. The unit will also turn itself off after six hours if the Main unit has been connected to another device using the analog inputs. Auto power down function is applied to only MASTER unit in case of WIRELESS PARTY LINK connection. In case of SLAVE unit, Auto power down is available after disconnection SLAVE unit and MASTER unit. How to disconnect the wireless network connection or the wireless device. Turn off the unit by pressing the power button for more than 5 seconds. 3 Operating yy Press and hold INFO / SLEEP to check or change the remaining time. Auto power down 36 Operating AUTO POWER On Auto function change This unit automatically turns on by an input source : LG TV or Bluetooth This unit recognizes input signals such as Bluetooth and LG TV or connected portable device, and then changes suitable function automatically. If you try to connect your Bluetooth device, this unit turns on and connects your Bluetooth device. You can play your music. ,,Note yy Depending on the connected device, this function may not operate. yy Depending on the connected device, the unit turns on but Bluetooth function may not be connected. 3 Operating yy If you disconnect Bluetooth connection by this unit, some Bluetooth devices try to connect to the unit continually. Therefore it is recommended to disconnect the connection before turning off the unit. yy If you try to connect to the “Music Flow Bluetooth” app, Bluetooth function of this unit is turned on. yy If you turn on the unit using LG TV or Bluetooth function, proper function of this unit is turned on. yy If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off. yy If you turn off the unit by pressing the power button for more than 5 seconds, Auto Power On function is disabled. To activate it, turn on the unit. When you try to connect Bluetooth device When you try to connect your Bluetooth device to this unit, Bluetooth function is selected. Play your music on the Bluetooth device. When PORT.IN connection is connected When you connect the portable device to the PORT. IN connector, PORTABLE function is selected. Play your music on the portable device. When LG TV is connected When you turn on your LG TV connected by LG Sound Sync, this unit changes the function to LG TV. You can hear the sound from your TV. ,,Note yy This function is not available during recording or deleting. yy This function only works with devices that were previously connected. Operating 37 LG Sound Sync You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with LG TV that supports LG Sound Sync. Make sure your TV has the LG Sound Sync logo. Controllable function by LG TV’s remote control : Volume up/down, mute Refer to the TV’s instruction manual for the details of LG Sound Sync. 1. Turn on the unit by pressing 1 on the remote control or 1/! on the unit. 3. Set up the sound output of TV to listen to the sound through this unit : TV setting menu [Sound] -> [TV Sound output] -> [LG Sound Sync (Wireless)] “PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on the display window if the TV and this unit are connected normally. yy If the connection fails, check the conditions of this unit and your TV : power, function. yy Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync. -- Turn off the unit. -- Changing to a different function. -- Disconnecting the wireless connection caused by interference or a distance. yy The amount of time to turn off this unit is different depending on your TV. yy If you try to change the function on using the LG TV function, volume will be change according to the LG TV volume level. yy Details of TV setting menu vary depending on the manufacturers or models of your TV. yy If you connect LG Sound Sync when “Music Flow Bluetooth” app is connected, control through the app is available. yy If you turned off the unit directly by pressing 1 on the remote control or 1/! on the unit, LG Sound Sync will be disconnected. To use this function again, you should reconnect the TV and the unit. yy If an LG TV is connected when using Bluetooth, Bluetooth is disconnected and the LG TV is connected. yy The volume may be increased when the TV and this unit is connected by LG Sound Sync. Decrease the TV volume and then connect with this unit. 3 Operating 2.Press F / WIRELESS LINK on the unit or F on the remote control until LG TV function is selected. ,,Note yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV. 38 Operating WIRELESS PARTY LINK Connection The output sound of (MASTER) unit is expanded to (SLAVE) unit. It is compatible with unit that supports WIRELESS PARTY LINK. The name of function about sound expansion between the compatible products wired or wirelessly was changed to PARTY LINK or WIRELESS PARTY LINK. 3 Operating 1. Press and hold F / WIRELESS LINK on the unit for 3 seconds. PARTY LINK MODE SELECT appears in the display window. 2. Rotate Y SEARCH U on the unit to select MASTER or SLAVE. - unit : Selects MASTER. - unit : Selects SLAVE. Two units try to connect with each other. 3. When this unit is successfully connected each other, “Slave Device Name CONNECTED” appears in the MASTER unit. “CONNECTED TO Master Device Name” appears in the SLAVE unit and change to SLAVE soon. ,,Note yy If you using the LG Sound Sync, this function is not available. If you connect the LG TV Function, “NOT SUPPORT” appears in the display window. yy You can use microphone in the SLAVE unit only. In case of SLAVE unit, some functions are supported only. yy When WIRELESS PARTY LINK is disconnected, SLAVE unit is changed to BT function. yy If the connection is failed, “FAILED” appears in the display window. yy Mute function is synchronized with each other. yy WIRELESS PARTY LINK connection will be disconnected when you turn off the unit or press and hold the F / WIRELESS LINK on the unit for 3 seconds. yy Sound of MASTER unit and SLAVE unit may be different depending on playback status or source. yy Check the following information when connecting to Bluetooth. -- You can connect only one Bluetooth device in the MASTER unit. You cannot connect Bluetooth device to the SLAVE unit. -- WIRELESS PARTY LINK connection is only supported on Android or iOS devices. (WIRELESS PARTY LINK connection may not be supported depending on the connected device specifications or OS.) -- Removable/detachable Bluetooth devices (ex. Dongle etc.) will not support WIRELESS PARTY LINK connection. -- When WIRELESS PARTY LINK is connected, Blutooth connection is not available in status of recording or deleting. Troubleshooting 39 Troubleshooting General Problem Cause & Solution yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. The unit does not work properly. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. yy The power cord is not plugged in. Plug in the power cord. No Power. No sound. yy Check whether electricity failed. Check the condition by operating other electronic devices. yy Check whether you select right function. Press function button and check the selected function. yy An unplayable disc is inserted. Check the playable disc. The unit does not start playback. yy No disc is inserted. Insert a disc. yy The disc is dirty. Clean the disc. (Refer to page 43) yy The disc is inserted upside down. Place the disc with the label or printed side facing upwards. yy The antenna is positioned or connected poorly. Connect the antenna securely. Radio stations cannot be tuned in properly. yy The signal strength of the radio station is too weak. Tune to the station manually. yy No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). Preset some radio stations, see page 26 for details. 4 Troubleshooting yy Check to see if the Speakers are connected correctly. Speaker cables connected correctly. 40 Troubleshooting Problem Cause & Solution yy The remote control is too far from the unit. Operate the remote control within about 23 ft (7 m). The remote control does yy There is an obstacle in the path of the remote control and the unit. Remove the obstacle. not work properly. yy The batteries in the remote control are exhausted. Replace the batteries with new ones. No speaker light yy Check whether the speaker light cables are connected to the unit correctly. Connect the speaker light cables to the unit correctly. yy Check the speaker light effects by pressing LIGHTING / VOICE CANCELLER. yy Check whether your LG TV supports LG Sound Sync. LG Sound Sync does not work. 4 yy Check connection of LG Sound Sync. yy Check sound setting of your TV and this unit. Troubleshooting Appendix 41 General specifications General Power requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Networked standby : 0.5 W Dimensions (W x H x D) (If all network ports are activated.) Approx. 450 mm x 160 mm x 355 mm Net Weight Approx. 6 kg Operating temperature Operating humidity 5 °C to 35 °C (41 °F to 95 °F) 60 % Inputs Analog audio in (AUX IN) 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) Portable in (PORT. IN) 1.2 Vrms (3.5 mm stereo jack) x 1 Microphone (MIC 1/2) Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2 Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz 5 System 40 to 20,000 Hz More than 75 dB More than 80 dB 5 V 0 500 mA Amplifier (RMS Output power) Total output HIGH MID LOW 2,750 W 555 W X 2 (6 Ω at 5 kHz, 25 % THD) 555 W X 2 (6 Ω at 1 kHz, 25 % THD) 530 W X 2 (6 Ω at 70 Hz, 25 % THD) yy Design and specifications are subject to change without notice. Appendix Frequency Response Signal-to-noise ratio Dynamic range Bus Power Supply (USB) 42 Appendix Speakers specifications Front speaker Type Impedance Rated Input Power Max. Input power Net Dimensions (W x H x D) Net Weight HIGH : 2 Way 2 Speaker MID : 1 Way 1Speaker HIGH : 6 Ω MID : 6 Ω HIGH : 555 W MID : 555 W HIGH : 1,110 W MID : 1,110 W Approx. 321 mm x 454 mm x 301 mm Approx. 9.7 kg Subwoofer 5 Type 1 Way 1Speaker Impedance 6Ω Rated Input Power Max. Input power Net Dimensions (W x H x D) Net Weight 530W 1060W Approx. 325 mm x 454 mm x 302 mm 9.5 kg Appendix yy Design and specifications are subject to change without notice. Trademarks and Licenses The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. Appendix 43 Maintenance Handling the Unit When shipping the unit Notes on Discs Handling Discs Never stick paper or tape on the disc. Storing Discs Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time. Cleaning Discs Cleaning the unit Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out. To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for old vinyl records. Maintaining the Unit 5 Appendix The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center.