LG | CM8350 | User guide | LG CM8350 Owner's manual

LG CM8350 Owner's manual
Using External Device ( or )
Speaker Connection
X-BOOM PLUS
a
AUX IN Connection
You can connect two units to play music together.
AUDIO OUT
a
Mini Hi-Fi
System
PORT. IN Connection
Press X-BOOM PLUS/DEMO.
b
Model : CM8350
<
,
Select AUX or PORTABLE.
b
ENGLISH | SIMPLE MANUAL (1 of 2)
c
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s
Manual. Some of the content in this manual may differ
from your unit.
Rotate SCRATCH & CONTROL to adjust Delay setting.
c
Make sure to connect the speaker plugs into their corresponding colored speaker connectors.
Press X-BOOM PLUS/DEMO to save the Delay setting. /
d
z
Play the music on the connected external device.
,
This function is available on CD, USB 1, USB 2, BT, PORTABLE Function.
FM Antenna
www.lg.com
Disc & Data Playback
Radio Operation
Presetting Radio Station
Deleting File
a
a
a
a
Select the file you want to delete in stop mode.
FM 87.50
Select the station to preset.
Select the folder you want to delete.
b
b
CD
FM 87.50
USB 2
b
01
USB 1
Select FM.
Select CD, USB 1 or USB 2.
Select the preset number and store the station.
Select to delete the file, folder or format the USB.
b
DEL FILE
DEL DIR
FORMAT
c
Press C / V to select a desired song and press d/M
to play.
Tune the desired frequency. (Press and hold for auto tuning. Press for Manual
tuning.)
c
DELETE
Select preset station to listen to.
c
,
,
Select STEREO or MONO on FM Function.
To delete all the saved station
Folder Searching
Press PRESET.FOLDER W/S to select a folder and press d/M to play
the first file of the selected folder.
a
b
,
Cancel the selection.
c
Press and hold PROGRAM/MEMORY.
Perform the selection.
Press PROGRAM/MEMORY when ‘ERASEALL’ blinks to confirm.
ERASEALL
,
This function is supported only in stop status. (USB only)
Empty folders are not searched.
CM8350-DB.DGBRLLK_MFL68899724_Sim_1.indd 1
2015-02-24
2:53:10
Using BLUETOOTH®
USER EQ
Using Music Flow Bluetooth App
a
Select BT.
BT READY
,
yy When this unit is successfully connected with your Bluetooth device, “PAIRED” will appear on the display window.
The display will change to the Bluetooth device’s name soon after.
To use this unit more comfortably, install “Music Flow Bluetooth” on your Bluetooth devices. Select a way of installation (
or
).
Press USER EQ.
a
yy If the device name isn’t available on the unit, “_” will be displayed.
USER EQ
yy Even when this unit is connected to 3 Bluetooth devices in the Bluetooth mode, you can play and control music
by using only one of the connected devices.
b
yy The multi pairing connection is only supported on Android or iOS devices. (Multi pairing connection may not be
supported depending on the connected device specifications.)
PAIRED
,
Search for “Music Flow Bluetooth” on the Google Play Store.
Music
Flow
Bluetooth
Music
Flow
Bluetooth
yy A removable/detachable Bluetooth device (Ex : Dongle etc.) doesn’t support multi pairing.
Rotate BASS or TREBLE to adjust the sound level.
b
TREBLE
BASS
yy Even when this unit is connected with multiple Bluetooth devices, only one device which is playing will keep the
Bluetooth connection, even if you change the function of the other devices.
Save the setting.
c
• If NFC connection does not work well, try again after checking the location of NFC tag
in your phone.
• Android O/S : Ver 4.1.2 (or later)
USER EQ
Scan QR code.
LG CM8350 (XX)
PAIRED
LG CM8350 (XX)
,
Set on the Bluetooth and select “LG CM8350 (XX)” on your Bluetooth device.
,
• Android O/S : Ver 4.0.3 (or later)
• Refer to the guide from the “Music Flow Bluetooth” App on your smart device.
Enter the PIN code (0000) as needed.
Play music on your Bluetooth device.
c
AUTO DJ
DJ EFFECT
Auto DJ blends the end of one song into the beginning of another for seamless playback.
a
Additional Feature
Press DJ EFFECT to select a desired DJ effect (FLANGER, PHASER,
CHORUS, DELAY, DJ OFF).
DJ EFFECT
AUTO DJ RANDOM
180
150
120
AUTO DJ SEQUENTIAL
. . . 10
OFF
AUTO DJ OFF
Select a desired AUTO DJ mode.
b
Rotate SCRATCH & CONTROL to adjust the effect level.
a
,
FILE-XXX_001
AUTO DJ SEQUENTIAL is selected when playing programmed list.
b
10:20
a
c
b
AM 12:00
10:20
0:00
d
c
10:20
d
e
10:20
,
You can adjust DJ EFFECT sound gage level between 0 to 15. The initial level is 7.
,
CM8350-DB.DGBRLLK_MFL68899724_Sim_1.indd 2
VOL 3
Alarm function works only after clock is set.
2015-02-24
2:53:13
Programmed Playback
USB Copying
You can make a playlist of your favourite tracks/files from a disc or USB device using programmed Playback .
To enjoy Programmed Playback
Press PROGRAM/MEMORY in stop mode.
a
,
USB 1
This function is supported only on stop status.
Play the Programmed Playback list.
b
Mini Hi-Fi
System
a
Connect USB devices to USB ports and select USB 1.
To make Programmed Playback list
Select CD, USB 1 or USB 2.
a
,
Model : CM8350
Press Z ENTER twice to exit from Programmed Playback mode.
Press USB REC to start recording. Audio files in USB 1 are copied to USB 2.
b
USB REC
Press PROGRAM/MEMORY.
b
To delete Programmed Playback List
Press C / V to select a track/file and press PROGRAM/MEMORY.
Repeat this step to store more files.
c
a
Press PROGRAM/MEMORY in stop status.
b
Press to select a track/file to delete.
,
Press Z ENTER to stop recording.
ENGLISH | SIMPLE MANUAL (2 of 2)
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s
Manual. Some of the content in this manual may differ
from your unit.
,
Enjoy the music on the Programmed Playback list.
d
Delete selected song.
c
DELETE
,
Status
Recording
Playback
One track/file
Programmed playback
Programmed track(s)/file(s)
Full stop
All track(s)/file(s)
yy To delete all of the Programmed Playback list, remove the CD or USB device from the unit.
yy A playlist of up to 20 tracks/files can be entered for each media.
www.lg.com
USB Recording
Auto Power On
,
a
Connect a USB device and select the function (CD, AUX, PORTABLE, Tuner) to record.
• A file is recorded by about 512 Mbyte when you record for a long term.
• When you stop recording during playback, the file that has recorded at that time will be stored.(Execpt MP3/WMA
file)
• Recording is not supported in BT or LG TV mode.
• Volume level will be changed between MIN to 30 during recording. (Only CD function)
• Press d/M to pause the recording. (Only Tuner, AUX, PORTABLE)
• It’ll be stored as follows. * The other source : AUX and the like.
AUDIO CD
MP3/WMA
TUNER
To select bitrate and recording speed
You can select bitrate and recording speed before recording.
HELLO
The other source*
Press and hold USB REC for 3 seconds.
a
USB REC
Press USB REC to start recording. Press Z ENTER to stop recording.
b
Press C / V to select a bitrate and press USB REC.
b
USB REC
This unit automatically turns on by an input source : LG TV or Bluetooth
If you have already paired with this unit, automatically this unit can turn on by an input source when this unit is turned off.
USB REC
Press C / V to select a recording speed and press USB REC. (Only CD
function)
c
USB REC
Auto Function Change
,
Status
Recording (Only CD function)
Playback
One track/file
Programmed playback
Programmed the track(s)/file(s)
Full stop
All track(s)/file(s)
This unit recognizes input signals such as Bluetooth and LG TV and then changes suitable function automatically.
LG Sound Sync
LG Sound Sync enables you to control some functions of this unit by a remote control of your LG TV. Controllable functions
are volume up/down and mute. Make sure that your TV has LG Sound Sync logo as shown above.
b
Set up the sound output of your TV : TV setting menu
[ [Sound] [ [TV Sound output] [ [LG Sound Sync
(Wireless)]
TV Speaker
External Speaker
How to affix the Ferrite Core
Additional Information
Ferrite core may not be provided depending on each nation’s regulations.
Music File Requirement
LG Sound Sync (Optical)
Sampling frequency
yy MP3 : 32 kHz - 48 kHz
yy WMA : 32 kHz - 48 kHz
Bit rate
yy MP3 : 32 - 320 kbps
yy WMA : 40 - 192 kbps
LG Sound Sync (Wireless)
a
Pull the stopper [a] of the ferrite core to open.
Data CD : 999 / USB : 2000
Maximum files
Data CD : 99 / USB : 200
Maximum folders
b
Wind the power cord around the ferrite core twice (Once for 110 V cord).
Wind the SPEAKERS cables around the ferrite core once.
PAIRED
a
LG TV
c
File extensions
yy “.mp3”
yy “.wma”
CD-ROM file format
ISO9660+JOLIET
USB Flash Drive
Devices that support USB2.0 or USB1.1.
Close the ferrite core until it clicks.
Bluetooth
Codec
SBC
Select LG TV function.
LG TV
,
•
•
•
,
•
•
•
•
The USB function of this unit does not support all USB devices.
Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.)
External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
The DTS is not supported. In case of DTS audio format, audio is not output.
For specific information of operating, refer to the instruction manual of your TV.
When the connections failed, make sure of the conditions of this unit and your TV : power, function.
The amount of time to turn off this unit is different depending on your TV.
Specification
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH
Power Requirements
Refer to the main label on the unit.
Refer to the main label on the unit.
Power Consumption
Networked standby : 0.4 W (If all network ports are activated.)
Bus Power Supply (USB)
5 V 0 500 mA
Amplifier Total Output
2000 W
Design and specifications are subject to change without notice.
How to disconnect the wireless network connection or the wireless device
Turn off the unit by pressing the power button for more than 5 seconds.
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug. When replacing the fuse, always use of the same rating approved to BS 1362. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth
symbol 6 or coloured green or green and yellow. If any other plug is fitted, use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be
connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured red.
Replacement of battery
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
and animal health, the old battery or the battery put it in the
appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
2. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
3. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.
Disposal of waste batteries/accumulators
WARNING: Do not install this equipment in a confined space such
as a book case or similar unit.
CAUTION: Do not use high voltage products around this product.
(ex. Electrical swatter) This product may malfunction due to
electrical shock.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating. The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar surface. This product
shall not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.To ensure proper
use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to
open the enclosure.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the
steps in reverse order than the assembly. To prevent contamination
of the environment and bring on possible threat to human
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months
from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG
equipment, for a period of 12 months from the original date of purchase. These claims must be made in accordance with
the published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the apparatus,
or if non standard components are used or if the serial number of the apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally purchased.
The dealer may, before carrying out service under guarantee, require a receipted account as evidence of the date of
purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
Pb
1. This symbol may be combined with chemical symbols for
mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains
more that 0.0005% of mercury, 0.002% of cadmium or 0.004%
of lead.
2. All batteries/accumulators should be disposed separately from
the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of Your old batteries/ accumulators will
help to prevent potential negative consequences for the
environment, animal and human health.
4. For more detailed information about disposal of Your old
batteries/ accumulators, please contact Your city offi ce, waste
disposal service or the shop where You purchased the product.
Declaration of Conformity
(R0
3)
(R03)
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
This guarantee does not affect your statutory rights.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping
or splashing) and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Technology with the human touch
Hereby, LG Electronics European Shared Service Center B.V.,
declares that this MINI HI-FI SYSTEM is compliant with the essential
requirements and other relevant provisions of Directive
1999/5/EC. The complete Declaration of Conformity may be
requested through the following postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission system, intended
for use in all EU member states and EFTA countries.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG to
assist you in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lg.com/uk
(Service website : www.lg.com/uk/support)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising