LG | FA162 | LG FA162 Owner’s Manual

LGEUK_FA162_JA4ULLN_ENG_MFL36264611
MICRO Hi-Fi SYSTEM
OWNER’S MANUAL
MODEL: FA162
FA162-A0U/D0U/X0U
FAS162F
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
USB
FOR THE WARRANTY TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating.
The openings should be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instruction have been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the unit
require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE
INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
2
Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is easily
accessible.
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains
plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover contact your dealer. If the
type of plug supplied is not suitable for the mains sockets in your home,
then the plug should be removed and a suitable type fitted. Please refer to
the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must
be destroyed. A mains plug with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the earth pin, marked with the
letter E or with the earth symbol
or coloured green or green and
yellow. If any other plug is fitted, use a 5 amp fuse, either in the plug, or at
the distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance
with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the
mains lead of this unit may not correspond with the coloured marking
identifying the terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is marked with the
letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
4. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.
This product is manufactured to comply with the
EEC DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.
POWER SAVE MODE
You can set up the unit into an economic power save mode.
In power-on status, press and hold 1(POWER) button for about
3 seconds.
- Nothing is displayed in the display window when the unit
goes into the power save mode.
To cancel power save mode, press 1(POWER).
Contents
Before use
About the Symbols for instruction /
Notes on Discs . . . . . . . . . . . . . . . . . . . . .3
Front / Back Panel . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . .5
Connections
Speaker System Connection /
Auxiliary Function . . . . . . . . . . . . . . . . . . .6
Antenna (Aerial) Connections . . . . . . . . . .7
Operation
USB Function . . . . . . . . . . . . . . . . . . . . . . .7
Setting the Clock / Timer Function /
Sleep Timer Function . . . . . . . . . . . . . . . .8
Audio Adjustment . . . . . . . . . . . . . . . . . . .9
Presetting the Radio Stations /
Listening to the Radio . . . . . . . . . . . . . . .10
RDS Function - OPTIONAL . . . . . . . . . . .11
CD Playback . . . . . . . . . . . . . . . . . . . . . .12
To Program Play /
About MP3/WMA . . . . . . . . . . . . . . . . . .13
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . .14
Specifications . . . . . . . . . . . . . . . . . . . . .15
The manual largely contains detailed
explanation items about how to operate
the unit with the remote control.
Before use
Before use
About the symbols for
instruction
Indicates hazards likely to cause harm to
the unit itself or other material damage.
Note
Indicates special notes and operating
features.
Notes on Discs
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the
disc from the center out.
Precautions in using the touch buttons
• Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
• Do not press the touch buttons hard to make it
work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
• Touch the button that you want to work in order
to operate the function correctly.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
• Be careful not to have any conductive material
such as metallic object on the touch buttons,
and it can cause malfunctions.
3
Front / Back Panel
19
1
12
2
3
13
14
4
15
5
16
20
22
21
6
7
OPEN
8
9
10
11
17
18
1. 1 (POWER)
2. VOLUME*
15. > (SKIP)
TUN. (+) (TUNER)
3. FUNC. (FUNCTION)
(FM, AM, CD, USB, AUX)
16. Z (OPEN/CLOSE)
4. .(SKIP)
TUN. (-) (TUNER)
18. PHONES
(Headphone jack :
5. XTS pro
19. Power cord
6. x (STOP)
MO./ ST. (MONO/ STEREO)
20. Antenna terminal
7. DISC TRAY
17.
USB connector
3.5mm)
21. AUX IN (Auxiliary input) connector
22. Speaker terminal
8. EQ master/ DEMO button
9. CLOCK button
*VOLUME Adjustment
10. TIMER button
11. SET/ RDS(OPTIONAL) button
12. Display window
13. B/[] (PLAY/PAUSE)
14. XDSS plus/ (MP3 Optimizer)
4
Move your finger around
the touch wheel.
Before use
Remote Control
DIMMER button
DISP.MODE (DISPLAY MODE) button
POWER button
PRESET/ FOLDER (
) buttons
SLEEP button
PLAY/PAUSE (B
B/[]) button •
STOP (x)/ MO./ST. button •
SKIP/ SEARCH •
bb/ BB>) buttons
(.b
TUN. (-/+) buttons •
REPEAT button •
RDS (Radio Data System) FUNCTION
buttons
RDS button : OPTIONAL •
PTY button : OPTIONAL •
PTY SEARCH button : OPTIONAL •
NUMERIC buttons
3
Detach the battery cover
on the rear of the remote
control and insert two R03
(size AAA) batteries with
3 and # aligned correctly.
AAA
AAA
Remote Control battery installation
MUTE button
• USB button
• FUNCTION button
VOLUME CONTROL(
) buttons
CLOCK button
PROGRAM/ MEMO button
D.SKIP button
•
•
•
•
EQ master button
XDSS plus button
XTS Pro button
RANDOM button
MP3 Info button
(MP3/ WMA file information display)
Remote Control Operation Range
Point the remote control at the remote sensor
and press the buttons.
• Distance : About 23 ft (7 m) from the front of
the remote sensor.
• Angle
: About 30° in each direction of the
front of the remote sensor.
#
Caution
: Do not mix old and new batteries. Never
mix different types of batteries (standard,
alkaline, etc.).
5
Connections
Speaker System Connection
Connect the speaker cables to the speaker terminal.
Front
speaker (R)
Front
speaker (L)
Notes:
• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –.
If the cords are reversed, the sound will be distorted and will lack base.
• Connect the Left/Right speaker correctly. If it reversed, the sound may be distorted.
Auxiliary Function
Connect an auxiliary device such as a TV or VCR via the rear mounted AUX connector and press
FUNCTION (Refer to the example images 1 and 2 shown below).
Portable Device
To AUDIO in
Auxiliary Device
Example (1)
Example (2)
Portable in cable
To AUDIO out
Note:
Turn the unit off and then connect an auxiliary device before you connect an auxiliary device.
Because it may make a noise.
6
Connect the supplied FM/AM antennas for radio
reception.
FM wire antenna (supplied)
AM(MW) loop
antenna (supplied)
For AM(MW) reception,connect
the loop antenna (aerial) to the
terminal marked AM
Notes:
• To prevent noise pickup, keep the AM loop
antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it
as horizontal as possible.
Operation
USB Function
You can enjoy MP3/ WMA media file saved on
player or USB memory device by connecting the
device to the USB port of this unit.
Compatible Devices
1. Devices which require additional program
installation when you connect it to a computer, are not supported.
2. MP3 Player : Flash type MP3 player.
• The MP3 player requiring installation of a
driver is not supported.
3. USB Flash Drive : Devices that support
USB2.0 or USB1.1.
Basic Playback
1. Connect the USB device to the USB connector of your unit.
2. Press USB to enter the USB mode.
“CHECKING” appears in the display window,
and then the total number of files is displayed.
3. Press PLAY/ PAUSE (B/[]).
In addition, you can also play using
NUMERIC buttons.
Operation
Antenna (Aerial) Connections
To Remove the USB from the unit
1. Choose an other function except USB
in order to remove the USB.
2. Remove the USB from the unit.
Notes:
• Besides Basic Playback, if you want to operate
other functions, see the CD Playback section.
• Do not extract the USB device in operating.
• A backup is needed to prevent a data damage.
• If you use a USB extension cable or USB hub,
the USB device might not be recognized.
• A device using NTFS file system is not supported. (Only the FAT (16/32) file system is
supported.)
• The USB function of this unit does not support
all USB devices.
• Digital camera and mobile phones are not
supported.
• This unit is not supported when the total
number of files is 1000 or more.
7
Setting the Clock
1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour
time system by tapping ./>.
v v
v v
v v v v v v v v
or
v v v v v v v
(12HR)
(24HR)
3. Press SET to confirm the selected hour time
system.
4. Tap ./> on the front panel to set the
correct hours.
5. Press SET.
6. Tap ./> on the front panel to set the
correct minutes.
7. Press SET and the correct time is shown on
the display window.
8. Press CLOCK at any time to display the
time for about 5 seconds.
Note:
If you want to reset the clock, press and hold
CLOCK for more than 2 seconds.
Timer Function
With the TIMER function, you can have the radio
reception, CD play and USB play turned on and
off at the desired time.
1. Press CLOCK to check the current time.
(If you don’t set clock, the timer function
doesn’t work.)
2. Press TIMER to enter the timer setting
mode. If you want to correct the previous
memorized TIMER setting, press and hold
the TIMER for more than 2 seconds.
- The previously memorized timer on the
time and “ ” indicator appears in the display window.
3. Each function (TUNER → CD → USB)
flashes in the display window in turn. Press
SET when the desired function is flashing.
4. a. When you select the TUNER function,
select the previously memorized preset
number by tapping ./ > on the front
panel and press SET.
b. When you select the CD or USB function,
- “ON TIME” indicator appears for about
0.5 seconds in the display window and
then disappears.
5. Set the hour to switch on by tapping
./> on the front panel.
6. Press SET.
8
7. Set the minute to switch on by tapping
./> on the front panel.
8. Press SET.
- “OFF TIME” indicator appears for about
0.5 seconds in the display window and
then disappears.
9. Set the hour to switch off by tapping
./> on the front panel.
10. Press SET.
11. Set the minute to switch off by tapping
./> on the front panel.
12. Press SET.
13. Adjust the volume level by tapping ./>
on the front panel.
14. Press SET.
“ ” appears in the display window and the
timer setting has been completed.
15. Switch the system off.
The selected function is automatically
switched on and off at the time set.
To cancel or check the timer
Each time the TIMER is pressed you can select
the timer set or cancel. You can also check the
timer setting status.
To activate or check the timer, press the TIMER
that “ ” appears in the display window.
To cancel the TIMER, press the TIMER that “ ”
disappears in the display window.
Sleep Timer Function
When the sleep timer is used, the power is automatically turned off after the specified time has
elapsed.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time
appears in the display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 → 150 → 120 → 90 → 80
→ 70 → 60 → 50 → 40 → 30 → 20 → 10
→ OFF (No display)
Note:
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the
SLEEP repeatedly until “SLEEP 10” appears,
and then press SLEEP once again while “SLEEP
10” is displayed.
MP3 Optimizer
Audio Adjustment
Headphone jack
Connect a stereo headphone plug ( 3.5mm) into
the headphone jack to listen to the sound through
headphones. The speakers are automatically disconnected when you plug in the headphones
(not supplied).
XDSS ON → MP3 -- OPT ON → NORMAL
XTS Pro
Press MUTE to temporarily stop the sound.
The “ ” indicator flashes in the display window.
To cancel it, press VOLUME (
again.
) or MUTE
DIMMER
This function turns the LED (Light-emitting diode)
on the front panel off and darken the display window by half in power-on status.
Press DIMMER once.
To cancel it, press DIMMER again.
EQUALIZER Effect
You can choose 7 fixed sound impressions and
adjust the BASS, MIDDLE and TREBLE.
- You can select a desired sound mode by using
EQ master.
→
→
NORMAL → USER EQ → POP → CLASSIC
→
DRAMA
ROCK
→
- Press EQ master to select USER EQ.
1. When USER EQ is displayed, press SET.
“BASS 0” will appear the display window.
2. Tap the ./ > to select the setting you
want (MIN, -4 ~ +4, MAX steps).
3. Select the BASS, MIDDLE or TREBLE you
want by tapping B/]] or x on the front
panel.
4. Adjust the MIDDLE and TREBLE as shown
above.
This unique sound quality developed by our
technology creates the optimum sound for you to
play the perfect playback of the original sound
and to feel the living sound source.
Each time you press XTS Pro the setting
changes in the following order.
XTS -- PRO ON ↔ XTS -- PRO OFF
Operation
MUTE
JAZZ
This function optimizes for compressed MP3
files. It improves the bass sound to make sweet
sound. Each time you press XDSS plus.
The setting changes in the following order.
Note:
The XTS Pro function will not be operated when
a headphone has been connected.
RANDOM
Press RANDOM during playback. The tracks on
the CD/MP3/WMA/USB will all play in random
order. To cancel it, press RANDOM again.
DISPLAY MODE
Whenever you press DISP. MODE (DISPLAY
MODE), you can enjoy the spectrum change with
6 types in the display window.
DEMO
Press EQ master on the front panel in power off
state to demonstrate the function in the display
window. To cancel it, press POWER or EQ master again.
XDSS
(Extreme Dynamic Sound System)
Press XDSS plus to reinforce treble, bass and
the surround effect. The “XDSS ON” or “NORMAL” indicator lights.
Audio CD : XDSS ON ↔ NORMAL
MP3/WMA : XDSS ON → MP3 -- OPT ON
→ NORMAL → XDSS ON ...
9
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
1. Press FUNCTION to select the frequency
(AM or FM) you want.
2. Select a station you want by pressing
TUN. (-/+).
Tuning in automatically
- Press TUN. (-/+) for more than 0.5 second.
Scanning stops when the unit tunes in a
stations.
Tuning in manually
- Press TUN. (-/+) briefly and repeatedly.
3. Press PROGRAM/ MEMO.
A preset number will flash in the display window.
4. Press PRESET/ FOLDER (
) to select
the preset number you want.
5. Press PROGRAM/ MEMO again.
The station is stored.
6. Repeat the steps 1 (or 2) to 5 to store other
stations.
To delete all the memorized stations
Press and hold PROGRAM/ MEMO for two
seconds, “ERASE ALL” appears in the display
window and then PROGRAM/ MEMO again, the
stations are deleted.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow the steps 4-5.
To recall presets
Press and hold PRESET/ FOLDER (
) until
the desired preset number appears or press it
repeatedly.
10
Listening to the Radio
1. Press FUNCTION to select the frequency
(AM or FM) you want.
The last received station is tuned in.
2. Press PRESET/ FOLDER (
) repeatedly to select the preset station you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by pressing VOLUME
(
) repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Tuning in manually” in
the left of this page.
• For automatic tuning, see “Tuning in automatically” in the left of this page.
To turn off the radio
Press 1(POWER) to turn the unit off or select
another function mode (CD, USB, AUX).
For your reference
• If an FM program is noisy;
Press MO./ ST. that “MONO” appears in the
display window. There will be no stereo effect,
but the reception will be improved.
Press MO./ ST. again to restore the stereo
effect.
• To improve reception;
Reposition the supplied antennas.
RDS Tuning
When a FM station is tuned in and it contains
RDS data, the unit will automatically display the
station’s call sign and the RDS indicator will light
in the Display Window as well as indicators for
the programme type recognition (PTY), Radio
Text (RT), Clock Time (CT) and RDS services
programme (PS) if transmitted by the station.
RDS Display Options
The RDS system is capable of transmitting a
wide variety of information in addition to the initial
call sign that appears when a station is first
tuned. In normal RDS operation the display will
indicate the station name, broadcast network or
call letters. Pressing RDS on the remote control
enables you to cycle through the various data
types in the sequence:
(FREQUENCY → PTY → RT → CT → PS )
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM !
title
This unit is equipped with RDS (Radio Data
System), which brings a wide range of information to FM radio. Now in use in many countries,
RDS is a system for transmitting station call signs
or network information, a description of station
programme type text message about the station
or specifics of musical selection and the correct
time.
A major benefit of RDS is its ability to encode
broadcasts with Programme Type (PTY) codes
that indicate the type of material being broadcast.
The following list shows the abbreviations used to
indicate each PTY along with an explanation of
the PTY.
News
Current Affairs
Information
Sports
Educational
Drama
Culture
Science
Varied Speech Programme
Popular Music
Rock Music
Easy Listening Music
Light Music
Classical Music
Other Music
Weather Information
Financial Programmes
Children’s Programmes
Social Affairs Programmes
Religious Broadcasts
Phone-In Programmes
Travel and Touring
Leisure and Hobby
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary Programmes
Station Alarm Test Message
Emergency Broadcast Information
Operation
About RDS
Programme Search (PTY)
title
RDS Function - OPTIONAL
• PTY (Programme type recognition)- The name
Note:
Some RDS stations may not choose to include
some of these additional features. If the data
required for the selected mode is not being transmitted, the Display Window will show a PTY
NONE, RT NONE, CT NONE, PS NONE
message.
title
You may search for a specific Programme Type
(PTY) by following these steps.
1. Press FUNCTION to select the FM mode.
2. Press PTY, the display will show the last
PTY in use.
3. Press PTY repeatedly to select a desired
PTY.
4. When the PTY is selected, press PTY
SEARCH.
The unit will go into the an automatic search
mode. When a station is tuned, the search
will stop.
title
of the programme type is shown in the Display
Window.
• RT (Radio text recognition)- The name of the
radio text is shown in the Display Window.
• CT (Time controlled by the channel)- Enables
the unit to receive the actual time and show it
in the Display Window.
• PS (Programme Service name)- The name of
the channel is shown in the Display Window.
11
CD Playback
REPEAT
Basic Playback
Press REPEAT during playback.
: To play one track repeatedly.
RPT ALL
: To play all tracks repeatedly.
→
RPT OFF : To cancel repeat play.
MP3/WMA
→ RPT 1
→
: To play one track repeatedly.
RPT FOLDER : To play folder repeatedly.
→
RPT ALL
: To play all tracks repeatedly
→
RPT OFF : To cancel repeat play.
Program repeat play
→ RPT 1
: To play one track repeatedly.
→
RPT ALL
: To play all program repeatedly.
→
Note:
To load an 8cm (3 inch) disc, put it onto the inner
circle of the tray.
3. Tap Z (OPEN/ CLOSE) to close the disc
compartment.
Audio CD : “READING” appears in the display window, and then the total
number of tracks and the playing time are displayed.
MP3/ WMA CD: “READING” appears in the
display window, and then
the total number of files is
displayed.
4. Press PLAY/ PAUSE (B/[]).
In addition, you can also play an Audio CD
or MP3 CD using NUMERIC buttons.
Audio CD
→ RPT 1
→
1. Use FUNCTION to select CD function.
If no disc is loaded then “NO DISC” is
displayed.
2. Tap Z (OPEN/ CLOSE) and place the disc
into the disc tray.
RPT OFF : To cancel repeat play.
Pause Playback
Press PLAY/ PAUSE (B/[]) during playback. Press
this button again to resume play.
Stop Playback
Press STOP(x) during playback.
Skipping a Track
• Press BB> to go to the next track.
• When the .bb is pressed once midway
through a track, the player returns to the start
of that track. When it is pressed again, a track
is skipped each time the button is pressed.
12
To check MP3 file information
Press MP3 Info during MP3 file playback.
- The information (Title, Artist or Album) of the
MP3 file will be shown in the display window.
- If there is no the information of the MP3 file,
“NO ID3 TAG” indicator will be shown in the
display window.
Note:
This unit can play a CD-R or CD-RW that
contains audio titles or MP3/ WMA files.
Searching a Track
MP3/ WMA file folder function
Hold .bb/BB> during playback, then
release at the point you want.
Press PRESET/ FOLDER (
folder you want.
Note:
This function is only available for Audio CD’s.
Note:
It is applied to the case that has several
MP3/ WMA file folders.
) to select the
3. Press PROGRAM/ MEMO.
4. Repeat the steps 1 - 3 above.
5. Press PLAY/ PAUSE (B/[]).
To check the program contents
Press PROGRAM/ MEMO in stop mode.
- A Track and program number will be displayed.
To clear program contents
Press PROGRAM/ MEMO in stop mode.
And then Press STOP(x).
To add program contents
1. Press PROGRAM/ MEMO repeatedly in
program stop mode until the Track Number
blinks.
2. Repeat the steps 2 - 4 above.
To modify program contents
1. Press PROGRAM/ MEMO to display the program number you want to modify.
2. Repeat the steps 2 - 4 above.
About MULTI SESSION
- This function recognizes the multi session disc
according to a disc of CD-ROM type.
ex) If there are MP3/ WMA files in the first
session, the MP3/ WMA file in the first
session are only played.
If there are only MP3/ WMA files in the
whole session, all of the MP3/ WMA files in
the session are played.
If there is an Audio CD in the first session,
only the Audio CD in the first session is
played.
Operation
Track number
title
Program number
title
EX) “4 -- P 01” will be shown in the display.
title
MP3/ WMA Disc compatibility with this unit is
limited as follows:
1. Sampling Frequency
8 - 48kHz(MP3), 32 - 48kHz(WMA)
2. Bit rate
8 - 320kbps(MP3), 48 - 320kbps(WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/ WMA files using the software which cannot create a FILE SYSTEM,
for example “Direct-CD” etc., it is impossible
to playback MP3 files. We recommend that
you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
5. File names should be named using 30 letters or less and must incorporate
“.mp3”,“.wma” extension e.g. “********.MP3”
or “********.WMA”
6. Do not use special letters such as
“/ : * ? “ < >”etc.
7. Even if the total number of files on the disc
has more than 1000, it will only be shown
up to 999.
Operation
About MP3/ WMA
You can arrange the order of the tracks on the
discs and create your own program. The program can contain up to 20 tracks.
1. Press PROGRAM/ MEMO in stop mode.
“PROG.” appears in the display window.
2. Press .bb/ BB> to select the track.
title
To Program Play
13
Reference
Troubleshooting
Symptom
The power cord is disconnected.
Plug the power cord into the wall
outlet securely.
No sound
The power of the external source
equipment is switched off.
Switch on the external source
equipment.
The unit does
not start
playback
No disc is inserted.
Insert a disc.
An unplayable disc is inserted.
Insert a playable disc.
The disc is placed upside down.
Place the disc with the playback side
down.
The disc is not placed within the guide.
Place the disc on the disc tray
correctly inside the guide.
The disc is dirty.
Clean the disc.
The remote control is not pointed at the
remote sensor of the unit.
Point the remote control at the remote
sensor of the unit.
The remote
control does not
work properly
14
Correction
Causa
No power
The remote control is too far from the unit. Operate the remote control
within about 23 ft (7 m).
There is an obstacle in the path of the
remote control and the unit.
Remove the obstacle.
The batteries in the remote control are
exhausted.
Replace the batteries with new ones.
[Speakers]
Power supply
Refer to the back panel of the unit.
Power consumption
Refer to the back panel of the unit.
Net Weight
3.31 kg
External dimensions (WxHxD)
170 X 253 X 265 mm
Frequency response
20 - 20000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
75 dB
Tuning Range
87.5 - 108.0 MHz or 65 - 74 MHz, 87.5 - 108.0 MHz
Intermediate Frequency
10.7 MHz
Signal to Noise Ratio
60/55 dB (Mono)
Frequency Response
50 - 10000 Hz
Tuning Range
522 - 1620 kHz or 520 - 1720 kHz
Intermediate Frequency
450 kHz
Signal to Noise Ratio
30 dB
Frequency Response
140 - 1800 Hz
Output Power
80 W + 80 W
T.H.D
0.5 %
Frequency Response
40 - 20000 Hz
Signal-to-noise ratio
75 dB
Type
3 Way 3 Speaker
Impedance
4Ω
Frequency Response
70 - 20000 Hz
Sound Pressure Level
83 dB/W (1m)
Rated Input Power
80 W
Max. Input Power
160 W
Net Dimensions (WxHxD)
128 x 295 x 240 mm
Net Weight (1EA)
4.0 kg
Reference
[Amp]
AM
(MW)
[Tuner]
FM
[CD]
[General]
Specifications
Designs and specifications are subject to change without notice.
15
Technology with the human touch
GUARANTEE
● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of
12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the
repair of this LG equipment, for a period of 12 months from the original date of purchase. These claims
must be made in accordance with the published scale of service charges and
relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally
purchased. The dealer may, before carrying out service under guarantee, require a receipted account as
evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or
worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
● Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial
numbers and return it. This will enable LG to assist you in the future should you
lose your receipt, your units be stolen, or should modifications be necessary.
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
*
Please complete for your own record
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
P/NO : MFL36264611
Download PDF