LG | HRT403DA | LG HRT403DA Owner’s Manual

HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 1
ENGLISH
HRT403DA (HRT403DAM-P, SH43DA-S/C/A)
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
P/NO : MFL56962817
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from over heating. The
openings should be never be blocked by placing the product on a bed, sofa, rug
or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction has been adhered to.
CAUTION:CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WEN OPEN AND INTERLOCKS
DEFEATED AVOID EXPOSER TO THE BEAM.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. Should the unit require maintenance, contact
an authorized service centre.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION: The apparatus should not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized service centre. Protect the power cord from
physical or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the appliance. To disconnect power from the mains,
pull out the mains cord plug. When installing the product, ensure that the plug is
easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative:
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 3
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI
or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your home, then the plug
should be removed and a suitable type fitted. Please refer to the wiring
instructions below:
WARNING: A mains plug removed from the mains lead of this unit must be
destroyed. A mains plug with bared wires is hazardous if inserted in a mains
socket. Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the
distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with
the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains
lead of this unit may not correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire which is coloured blue
must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Copyrights
Recording equipment should be used only for lawful copying and you are
advised to check carefully what is lawful copying in the area in which you are
making a copy. Copying of copyright material such as films or music is
unlawful unless permitted by a legal exception or consented to by the rights
owner.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only,
unless otherwise authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p
HDD/DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
Open source software notice
This product includes
Freetype library : copyright © 2003 The FreeType Project (www.freetype.org).
Zlib compression library developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
Doubly Linked List licensed by Artistic license.
You can download this software from http://freshmeat.net/projects/linklist/
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
3
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 4
Contents
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HDD/DVD recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Active Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hooking up the HDD/DVD recorder . . . . . . . . . . . . . . . . . . . . .9
Hooking up the Active Subwoofer . . . . . . . . . . . . . . . . . . . . .10
Hooking up the HDD/DVD recorder - more you can do . . . .11-15
Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18
Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . . . .18-23
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Adjust the level settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . . .25-26
Using the digital EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-28
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-29
Playing DivX® movie files . . . . . . . . . . . . . . . . . . . . . . . . . .30-31
Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-36
Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-39
Dubbing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-46
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
4
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 5
Before you start
Recordable and Playable discs
This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
Symbol used in
this manual
HDD
DVD-R
HDD
-R
Yes
No
–
Yes
DVD-RW
DVD-RAM
DVD+R
RAM
+R
+R
+RW
Yes
Yes
No
No
Yes
Video mode
Video mode
VR mode
Auto
Auto
Auto
Limited
Yes
Yes
Limited
Limited
Yes
-RWVR
-RWVideo
DVD+R(DL)
DVD+RW
Logos
Re-Writable
Formatting Mode
(new discs)
Editing
Play on other
players
Recommended
discs
–
The player must compatible with corresponding media and the media has to be finalized.
Mitsubishi(8x,16x)
Verbatim(8x,16x)
–
Mitsubishi(4x)
Verbatim(4x)
JVC(4x)
Maxell(4x)
Mitsubishi(3x) Mitsubishi(8, 16x) Mitsubishi(2.4x, 8x) Mitsubishi(4x)
Maxell(5x)
Verbatim(8x,16x)
HP(4x)
Verbatim(4x)
Ricoh(4x)
Playable discs
The table below shows the file formats and media types that this unit can playback.
Symbol used in
this manual
DVD
Audio CD
DVD
ACD
Discs such as movies
that can be
purchased or rented.
Music CDs or CD-R/RWs
in music CD format that
can be purchased
Data disc (DivX, JPEG, MP3 or WMA)
DivX
JPEG
MP3
WMA
Logos
Characteristics
Discs that contain DivX, JPEG, MP3 or WMA files.
5
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 6
Notes on discs
Restrictions on copying
Depending on the conditions of the recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Some video materials are copy-once protected: Such material cannot be copied
to HDD or DVD. You can identify copy-once protected material during playback
by displaying disc information on-screen.
Do not attach any seal or label to either side (the labeled side or the
recorded side) of a disc.
NTSC format signals from the analog or the DV inputs are not recorded
correctly with this unit.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing
so may result in malfunctions.
Video signals in SECAM format (from the built-in TV tuner or from the
analog inputs) are recorded in PAL format.
Depending on the recording software & the finalization, some recorded discs
(CD-R/RW or DVD±R/RW) may not be playable.
About the
Symbol Display
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal
computer or a DVD or CD Recorder may not play if the disc is damaged or
dirty, or if there is dirt or condensation on the Unit’s lens.
“
” may appear on your TV display during operation and indicate that the
function explained in this owner’s manual is not available on that specific media.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of the
settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many different types of
recordable disc formats (including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see above) to ensure
compatible playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right to
grant such permission. Permission should always be sought from the
copyright owner.
Availability of copying or moving feature
From
To
MP3/WMA
HDD
DISC
-
-
-
Yes
DISC
HDD
Yes
Yes
Yes
Yes
USB drive
HDD
Yes
Yes
Yes
-
*1 The title is recorded from this unit.
6
JPEG
DivX
Title*1
Regional Codes
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from the unit, the
message “Incorrect region code. Can’t play back” appears on the TV screen.
Remote Control Operation
Point the Remote Control at the remote sensor and press the buttons.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert R03
(size AAA) battery with 3 and # matched correctly.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 7
Remote control
a
b
c
d
a POWER: Switches the HDD/DVD recorder ON or OFF.
HOME: Activates the HOME menu.
HDD: Selects the HDD/DVD recorder’s mode to HDD.
DVD: Selects the HDD/DVD recorder’s mode to DVD.
AV: Changes the input source (Tuner, AV1-3, or DV IN).
TV/DVD: Press to switch between ‘TV mode’, in which you
can operate the picture and sound from the TV, and ‘DVD
mode’, in which you can operate the picture and sound from
the HDD/DVD recorder.
0-9 numerical buttons: Selects numbered options in a
menu.
FAV: Displays the favorite program list.
SUBTITLE: Selects a subtitle language.
b SKIP (. / >): Go to next or previous chapter/track/file.
SCAN (m / M): Search backwards or forwards.
PLAY (N): Starts playback.
STOP (x): Stops playback or recording.
PAUSE/STEP (X): Pause playback or recording temporarily.
REC(z): Starts recording. Press repeatedly to set the
recording time.
c MENU/LIST: Displays the menu on a DVD disc or switches
between Title List-Original and Title List-Playlist menu.
INFO.(i): Accesses on-screen Display.
OK ( ): Acknowledges menu selection.
b / B / v / V (left/right/up/down):
Used to navigate on-screen displays.
BACK (O): Removes the on-screen displays.
GUIDE: Displays the EPG menu.
AUDIO ( ): Selects an audio language or audio channel.
TEXT: Switches between digital text mode and normal TV
viewing.
TIME SHIFT: Activates pause live TV/playback (timeshift) for
a live TV program.
REPEAT: Repeat sequence, chapter, track, title, all.
TITLE: Displays the disc’s Title menu, if available.
MARKER: Selects multiple files/titles on the list.
VOLUME (+/-) : Adjusts speaker volume.
The volume information appears on the active
subwoofer display.
CLEAR: Removes a track number on the Program List.
PR (+/-): Scans up or down through memorized
channels.
PR LIST: Displays the program list menu.
Color buttons : Use when an EPG screen is displayed or
when tuned to a teletext program of a digital broadcast. The
function of each button will be described on-screen, and
changes depending on the screen being displayed.
d The related information of the selected button appears
on the active subwoofer display.
AMP POWER 1: Switches the active subwoofer ON or OFF.
FUNCTION: Selects the active subwoofer’s mode to
DVD/TV or FM.
EQ: Sets the sound effect.
VSM: Selects the virtul sound.
LEVEL/AV Sync
- Adjusts the sound level of the speaker
- Adjusts the delay between picture and sound.
MUTE: Disables or enables sound output of the speakers.
DRC: Compresses the dynamic range of the sound track.
TEST TONE: Adjusts the sound balance of the speakers
from the listener’s position.
MONO./STEREO: Selects STEREO or MONO.
MEMO./CLEAR: Stores or deletes the radio station’s
frequency in the tuner’s memory.
PRESET (-/+): Selects programmed station of Radio.
TUN. (-/+): Tunes in the desired radio station.
RDS: Selects RDS information.
PTY: Starts a search for a specific PTY type.
7
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 8
HDD/DVD recorder
a
b
cd e
f
g hi jk
i x (STOP)
Stops playback or recording.
j z (REC)
Starts recording. Press repeatedly to set the recording time.
k RES. (Resolution)
Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.
l m
- HDMI: 576i, 576p, 720p, 1080i, 1080p
- COMPONENT: 576i, 576p
n
a 1 / I (POWER button)
Switches the unit ON or OFF.
b Disc Tray
Insert a disc here.
c DVD
Set the recorder’s mode to DVD.
d OPEN/CLOSE (Z)
Opens or closes the disc tray.
e HDD
Set the recorder’s mode to HDD.
f Display window
Shows the current status of the unit.
T/S: Indicates the timeshift mode.
REC: The unit is recording.
l USB Port
Connect a USB Flash memory.
m DV IN
Connect the DV output of a digital camcorder to the HDD/DVD recorder.
n AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/
Monitor, VCR, Camcorder, etc.).
Active Subwoofer
a
b
c
DVD: The unit is in DVD mode.
HDD b B DVD: The unit is dubbing.
: Indicates clock, total playing time, elapsed time, title number,
chapter/track number, channel, etc.
g Remote Sensor
Point the remote control here.
h N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
8
e
f
a 1 / I (POWER button)
Switches the unit ON or OFF.
b Display window
Shows the current status of the unit.
c FUNCTION
Selects the active subwoofer’s mode to
DVD/TV or FM.
HDD: The unit is in HDD mode.
: Indicates when the unit is in timer recording or a timer recording is
programmed.
d
g
d TUN.(+/-)
Tunes in the desired radio station.
e VSM
Selects the virtul sound.
f VOLUME
Adjusts speaker volume.
g Speaker duct
A hall for plentiful bass sound on speaker
cabinet (enclosure).
Be careful to make sure children not to put
their hands or any objects into the speaker
duct.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 9
Hooking up the HDD/DVD recorder
a Antenna connection
Connect the Terrestrial
TV antenna to the
ANTENNA IN jack on
the unit.
If you want to use an
indoor antenna, use one
with a signal amplifier
rated at 5V, 100mA and
set [Antenna Feed 5V]
to [ON] in the setup
menu. (See page 19 for
details)
b Antenna connection to
your TV
Connect one end of the RF
cable to ANTENNA OUT jack
on the HDD/DVD recorder
and other end to ANTENNA
IN jack on your TV.
Passes the signal from the
ANTENNA IN jack to your
TV/monitor.
Antenna
(Digital)
Antenna
(Analog)
c SCART connection
Connect one end of the scart
cable into the AV1 SCART
jack on the HDD/DVD
recorder and the other end
to the corresponding in jack
on your TV.
and/or
d Power cord connection
Connect the mains lead to
the AC IN terminal on the
HDD/DVD recorder. Then
plug the power cord into the
mains.
9
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 10
Hooking up the Active Subwoofer
a Remote control
connection
Connect one end of the
remote control cable into
the REMOCON OUT jack
on the HDD/DVD recorder
and the other end to the
REMOCON IN jack on the
active subwoofer.
b Digital audio connection
(OPTICAL)
Connect one end of the
digital audio cable
(OPTICAL) to the
DIGITAL AUDIO
OUTPUT (OPTICAL) jack
on the HDD/DVD recorder
and the other end to the
DIGITAL AUDIO IN
(OPTICAL) jack on the
active subwoofer.
c FM antenna connection
Connect the FM antenna to the FM ANTENNA
jack on the active subwoofer. The reception will be
at its best when the two loose ends of the antenna
are in a straight and horizontal line.
Speaker decoration
This part of the device is made just for
design attraction.
d Speaker connection
Speaker cable is colour-coded by a band near each end.
COLOUR
SPEAKER
POSITION
Green
Center
Above screen, directly front
of you
Red
Right
In front of you, to the right of
the screen
White
Left
In front of you, to the left of
the screen
Connect the red end of each wire to the terminals marked +(plus) and the
black end to the terminals marked -(minus). To connect the cable to the
active subwoofer and the speakers, press each plastic finger pad to open
the connection terminals. Insert the wire and release the finger pad.
10
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 11
Hooking up the HDD/DVD recorder
- more you can do
General about connection
Picture and sound
Digital TV is a transmission technology that replaces the traditional analogue
technique.
This means that several TV channels, radio channels and other digital services
can be transmitted on the same space as just one analogue channel.
As a consumer you get access to many more channels and services with
perfect picture and audio quality.
Connecting your recorder is just as simple as connecting an old VCR recorder.
And by using a HDMI cable for connection you get the best picture quality to
your TV-set. The best audio experience can be obtained by connecting an
optical cable to your sound system.
Component connection
Connect one end of the component(Y PB PR) cable to the COMPONENT
OUTPUT jack on the HDD/DVD recorder and other end to the COMPONENT
INPUT jack on your TV.
Connect one ends of the audio cables (red and white) to the analog AUDIO
OUTPUT jack on the HDD/DVD recorder and other ends to the AUDIO INPUT
jack on your TV.
Coverage
Before buying this product it is anticipated that you have made sure that there
are digital transmissions covering your region.
Antenna / Signal source
You may decide to connect your HDD/DVD recorder to an indoor arial or an
external arial. Either of the two can give you variances on the signal strength. If
you live in a flat you should make sure that the digital terrestrial signals are
distributed to your wall antenna outlet. If you have your own antenna system
you must make sure that it is equipped with antennas, filter and/or amplifier that
can handle those frequencies that the digital channels are transmitted on.
If your television is a high-definition or “digital ready” television, you may take
advantage of the unit’s progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive Scan format, the picture
will appear scrambled with the progressive signal.
Set the resolution to 576p using the RES. button on the front panel of the
HDD/DVD recorder to obtain the 576p progressive signal.
Cable-TV
Please observe that this recorder is not designed for the reception of regular
digital cable-TV signals (QAM-signal). Despite this, operators of smaller cable
networks may have chosen to distribute the digital terrestrial signals
(COFDM-signal) in the network. In this case this recorder may be used.
11
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 12
S-Video connection
Digital audio connection
Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the
HDD/DVD recorder and the other end to the S-Video INPUT jack on your TV.
Connect one end of the audio cable (red and white) to the analog AUDIO
OUTPUT jack on the HDD/DVD recorder and the other ends to the AUDIO
INPUT jack on your TV.
Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other
equipment with a digital input.
Connect one end of the digital audio cable (COAXIAL or OPTICAL) to the digital
audio output jack (COAXIAL or OPTICAL) on the HDD/DVD recorder and the
other end to the digital audio input jack (COAXIAL or OPTICAL) on your
amplifier.
This recorder does not perform internal (2 channel) decoding of a DTS sound
track. To enjoy DTS multi channel surround, you must connect this recorder to a
DTS compatible receiver via one of this recorder’s digital audio outputs.
12
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 13
HDMI connection
If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu (See page 20). To enjoy DTS multi channel
surround, you must connect this unit to a DTS compatible receiver via
one of this unit’s digital audio outputs.
If there is noise or lines on the screen, please check the HDMI cable.
Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and
then turn it on again.
When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and the HDD/DVD recorder.
Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on the HDD/DVD recorder.
Connect one end of the HDMI cable to the HDMI OUTPUT jack on the
HDD/DVD recorder and other end to the HDMI INPUT jack on your TV.
Recorder
TV
When you use the HDMI connection, you can change the resolution (576i,
576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button on
the front of the HDD/DVD recorder repeatedly.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720(1440)x576i, 720x576p,
1280x720p, 1920x1080i or 1920x1080p video input.
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a
single digital connection for use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of HDCP (High-bandwidth
Digital Contents Protection). HDCP is used to protect digital content transmitted
and received.
Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
What is SIMPLINK?
HDMI has the capability to support standard, enhanced, or high-definition video
plus standard to multi-channel surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one
connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
•
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip,
Stop, Power Off, etc.
•
Refer to the TV owner’s manual for the details of SIMPLINK function.
•
LG TV with SIMPLINK function feature the logo as shown above.
Note on HDMI connection
Some functions of this HDD/DVD recorder can be controlled by the TV’s
remote control when connected to a LG TV with SIMPLINK through the
HDMI
connection.
If your TV is NOT capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu (See page 20).
When this choice is made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu
(See page 20).
13
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 14
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus programmes if you connect a
decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the
mains when connecting the decoder. You do not need to turn on the unit to view
the signals from the connected tuner on your TV.
Pictures containing copy protection signals that prohibit any copying cannot
be recorded.
If you pass the unit signals via the VCR, you may not receive a clear image
on your TV screen.
Be sure to connect your VCR to the unit and your TV in the order shown
below. To watch video tapes, watch the tapes through a second line input on
your TV.
When you record to a VCR from this unit, do not switch the input source to
TV by pressing the TV/DVD button on the remote.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART
jack to the AV2 DECODER jack.
If you disconnect the unit’s mains lead, you will not be able to view the
signals from the connected VCR or tuner.
To watch or record PAY-TV/Canal
Plus programmes, set [AV2
Connection] option to [Decoder]
(see page 19) and set the
program’s [CANAL] option to [On]
on the Setup menu (page 16).
SCART AV
If you disconnect the unit’s mains
lead, you will not be able to view
the signals from the connected
decoder.
Connecting to the AV2 DECODER jack
Connect a VCR or similar recording device to the AV2 DECODER jack of this
unit. You do not need to turn on the unit to view the signals from the connected
tuner on your TV.
To watch or record the source from
AV2 DECODER jack, set [AV2
Connection] option to [Others] (see
page 19) and set [AV2 Recording]
option to [Auto], [CVBS], [RGB] or
[S-Video] as required (see page 22).
14
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 15
Connecting to the AV IN 3 Jacks
Operating USB Flash Drive
Connect the input jacks (AV IN 3) on the HDD/DVD recorder to the audio/video
out jacks on your accessory component using audio/video cables.
ON REMOTE
1. Insert an USB Flash Drive to the USB port:
–
2 Displays the HOME menu:
HOME
3 Select a main option:
bB
[MUSIC], [PHOTO] or [MOVIE] option
4 Select the [USB] option:
vV
5 Displays corresponding menu list:
OK (
)
For details of operations on each files, refer to
relevant pages.
To listen to the output sound from HDD/DVD recorder, you must set
the active subwoofer to DVD/TV by pressing FUNCTION.
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to connect a DV digital
camcorder and digitally transfer DV tapes to DVD.
Use a DV cable (not supplied) to connect the DV in/out jack of your
DV camcorder to the front panel DV IN jack of this unit.
Using USB Flash Drive - more you can do
Using a USB Flash Drive
This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash
Drive.
Inserting the USB Flash Drive – Insert straight-in until it fits into place.
Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully
when not is in use.
Notes on USB Flash Drive
The DV IN jack is for connection to DV digital camcorder only. It is not compatible
with digital satellite tuners or D-VHS video decks. Disconnecting the DV cable
while recording the contents of the connected digital camcorder may result in
malfunction.
The contents on a disc or HDD cannot be moved or copied to a USB Flash
Drive.
Keep the USB Flash Drive out of reach of children. If swallowed, seek
medical advice immediately.
This unit supports only USB Flash Drive with FAT16 or FAT32 format.
The USB Flash Drives which require additional software will not be
supported.
This unit is compatible with the Flash type USB device that supports USB
1.1.
This unit may not supports some USB Flash Drive.
Do not extract the USB Flash Drive whilst in use (play, copy, etc.).
It may cause a malfunction on this unit.
15
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 16
Auto setup
During the first use of the HDD/DVD recorder ,
the initial setup wizard sets the language, clock and
channels automatically.
1 Turn on the unit:
The initial setup wizard appears on the screen.
ON REMOTE
POWER
2 Choose a language:
vV
3 Select the chosen language:
OK (
)
4 Check the antenna and go to the next step:
OK (
)
5 Choose a clock setting mode:
vV
6 Select the chosen clock setting mode:
OK (
7 Set the clock:
This step is not available for Auto mode
vVbB,
OK ( )
)
[Favorite]: Set the program to favorite channel.
[Delete] (Analog channel only): Delete the selected channel from
programmed channel list.
[Move] (Analog channel only): Change the order of the channels and which
numerical button they correspond to.
[Station Rename] (Analog channel only): change the name of the selected
channel.
[Program Edit] (Analog channel only): Change the settings of a channel
manually.
vV
8 Choose a broadcasting type:
All or Analog
Editing a channel (Analog channel only)
9 Select the [Start] and starts channel scan:
B, OK (
10 Close the initial setup:
OK (
)
You can change the settings of programmed channel by selecting
[Program Edit] option on the left side of the channel editing screen.
)
Auto setup - more you can do
Adjust the programmed channels
Press HOME, then use b B to select [Easy Menu] option. Press OK( ) while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B to move to the third
level. Press OK( ) while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press OK(
on the left side of the screen will be highlighted.
16
). An option menu
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.]: Changes the channel number.
[MFT]: Fine tunes the channel to obtain a clearer picture.
[CANAL]: Sets the channels for the decoder. You need this setting to watch
or record PAY-TV/Canal plus programs.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 17
Switching the program list on the channel editing screen
You can switch the program list on the channel editing screen.
Using the Home Menu
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a main option:
bB
3 Select a sub option:
vV
4 Execute the selected option:
OK (
5 Exit the HOME menu:
HOME
)
Press v V to move the highlight position to the top of the program list.
Press b B to select [DIGITAL TV], [ANALOG TV] or [RADIO] then press v V to
select a program on the list.
Setting a favorite program
You can set a program as a favorite channel.
Using the Home Menu - more you can do
MOVIE
Press v V to select a program on the program list then press OK( ) to
highlight the option menu on the left side of the screen. Press v V to select
[Favorite] option then press OK( ). The program is set to the favorite program
and [FAV] appears on the TV screen.
Setting the AV1 Decoder
Sets the AV1 scart jack for inputting encoded video signals. This option sets the
unit to output the encoded signal from AV1 scart jack to AV2 (DECODER) scart
jack for decoding. The decoded signal is then sent back through the AV2
(DECODER) jack so you can record or watch PAY-TV/Canal Plus programs.
HDD – Displays the [Title List] menu, which shows recorded titles on HDD.
(page 36)
HDD DivX – Displays [Movie List] menu, which shows DivX® movie files on
HDD. (page 30)
DISC
– Displays [Title List] menu, which shows recorded titles on the disc. (page
36)
– Displays [Movie List] menu, which shows DivX® movie files on the disc.
(page 30)
– Plays DVD-Video disc (page 28).
USB – Displays [Movie List] menu, which shows DivX® movie files on the
USB Flash Drive. (page 30)
Press AV once while the channel editing screen appears. The [Decoder On/Off]
option on the option menu. Press OK( ) to turn on the option and press
OK( ) again to turn off. The [Canal+] appears on the screen when this option
is turned on.
17
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 18
PHOTO
HDD – Displays [Photo List] menu, which shows photo files on HDD. (page 33)
DISC – Displays [Photo List] menu, which shows photo files on the disc. (page 33)
USB – Displays [Photo List] menu, which shows photo files on the USB Flash
Drive. (page 33)
MUSIC
HDD – Displays [Music List] menu, which shows music files on HDD. (page 32)
DISC – Displays [Music List] menu, which shows music files or audio tracks on
the disc. (page 32)
USB – Displays [Music List] menu, which shows music files on the USB Flash
Drive. (page 32)
Easy Menu
SETUP – Displays SETUP menu. (page 18)
Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 21)
Adjust the SETUP settings
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select the [Easy Menu] option:
bB
3 Select the [SETUP] option:
OK (
4 Select a desired option on the first level:
vV
5 Move to second level:
B
6 Select a desired option on the second level:
vV
7 Move to third level:
B
8 Adjust or confirm the setting:
v V, OK (
9 Go back to the previous level:
b
Dubbing – Dubs a currently playing title from a finalized DVD±R or a DVD-ROM
title without copy protection. (page 40)
TV
HDD – Returns to live TV viewing in HDD mode. Pressing the HDD button on
the remote control will also allow you to directly choose this option.
DVD – Returns to live TV viewing in DVD mode. Pressing the DVD button on
the remote control will also allow you to directly choose this option.
Timer Record – Displays [Timer Record] menu. (page 34)
First level
Second level
Third level
18
)
)
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 19
Adjust the SETUP settings - more you can do
Adjust the general settings
TV Aspect – Selects the aspects ratio of the connected TV.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen cuts off the portions that do not
fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
AV2 Connection – You can connect a decoder or the other device to the
AV2(DECODER) jack on the rear panel.
Auto Programming – This option automatically scans and sets the available
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 21)
[All, Digital or Analog]: Select a broadcasting type which you want to scan
automatically.
[Start]: Start the channel scanning.
Program Edit– This option allows you to add channels and edit preset
channels. Password is needed to access this option, if [Lock System] option is
set to [On]. (page 21)
[Add Channel]: Select the broadcasting type between [Digital] and [Analog]
and then press v V to select the channel and press OK( ) to add the
selected channel.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 16)
Clock Set– The clock must be set in order to use [Timer record].
[Auto]: Set the channel that broadcasts a clock signal and the clock will be
set automatically. If the clock that has automatically set is different with your
local clock, you can amend this by using [Time Offset] option. (For example,
when British summer time is in use.) Press B to select [Time Offset] option.
Press v V to select a value then press OK( ) (0, 30, 60, 90, 120). Select “0”
if the clock has automatically corrected itself with your local time.
[Manual]: If there is no channel that broadcasts a clock signal in your area,
you can set the time and date manually.
[Decoder]: Select this when you connect a PAY-TV decoder to the
AV2(DECODER) jack on the unit.
[Others]: Select this when you connect a VCR or similar recording device to
the AV2(DECODER) jack on the unit.
Video output format – Select an option according to the TV connection type.
[YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on
the unit.
[RGB]: When your TV is connected to the SCART jack on the unit.
Power Save mode – Selects whether this HDD/DVD recorder is in power save
mode when the power is turned off. This option is not available when a timer
recording is set.
[ON]*1: The front panel display is off and only signals arriving at the antenna
input are passed through when the HDD/DVD recorder is turned off.
[OFF]: Turns off the [Power Save Mode].
*1 If you turn off the unit while receiving encoded signals, the power save mode will
not work
Antenna Feed 5V – If you are using an indoor antenna, use one with a signal
amplifier rated at DC 5V, 100mA and set this option to [ON].
[ON]: Power is supplied to the connected antenna.
[OFF]: The unit does not supply power to the connected antenna.
Initialization – You can reset the unit to its original factory settings
and format the HDD.
[Factory Set]: You can reset the unit to all its factory settings. Some options
cannot be reset (Rating, Password, and Area Code). The auto setup menu
appears on the screen after the factory settings.
[HDD format]: Everything recorded on the HDD will be erased.
19
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 20
Adjust the language settings
Adjust the audio settings
Display Menu – Select a language for the Setup menu and on-screen display.
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then OK( ) to
enter the corresponding 4-digit number according to the language code list
on page 42. If you make a mistake while entering number, press CLEAR to
delete numbers.
[OFF] (for Disc Subtitle): Turn off Subtitles.
DTV Audio – Digital channels sometimes provide multiple audio tracks, often in a
different language. You can set a default audio language with this setting.
If provided by the broadcaster, you can also select a different audio language
while viewing TV by pressing AUDIO repeatedly.
DTV Subtitle – Digital channels sometimes provide subtitles, often in a different
language. You can set a default subtitle language with this setting, if DTV subtitle
is provided by the broadcaster.
Press SUBTITLE repeatedly to select a subtitle language whilst viewing a digital
TV channel.
DivX Subtitle – Select a language code for the DivX® subtitle.
[Bitstream]: Select this when you connect the HDD/DVD recorder’s DIGITAL
AUDIO OUTPUT jack to an audio component with a built-in Dolby Digital,
DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect the
HDD/DVD recorder’s DIGITAL AUDIO OUTPUT jack to an audio component
without a built-in Dolby Digital or MPEG decoder.
[Off] (for DTS): Select this when you connect the HDD/DVD recorder’s
DIGITAL AUDIO OUTPUT jack to an audio component without a built-in DTS
decoder.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 kHz]: In case of DVD with 96KHz sampling, the output is converted to
48KHz. If your receiver or amplifier is NOT capable of handling 96KHz signal,
select [48KHz].
[96 kHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
20
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 21
Adjust the lock settings
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 42.
DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service. For more information, visit www.divx.com/vod.
Press OK( ) when [View] icon is highlighted and you can view the registration
code of the HDD/DVD recorder.
Adjust the recording settings
To access the Lock System, DVD Rating, DTV Rating, Set Password or Area
Code options, you must enter the 4-digit password. If you have not yet entered
a password you are prompted to do so. Enter a 4-digit password. Enter it again
to verify. If you make a mistake while entering number, press CLEAR to delete
numbers.
If you forget your password, you can reset it. Display the SETUP menu, input
‘210499’ and press OK( ). The password has now been cleared.
Lock System – Allows you to set up specific programs and ratings through
blocking schemes. Also allows you to activate or disable all of the lock schemes
previously set up. A password is required to gain access to the lock menu
options. When the Lock System is set to [OFF], the [DTV Rating] is not
effective.
DVD Rating – Select a DVD rating level. The lower the level, the stricter the
rating. Select [No Limit] to deactivate the rating.
DTV Rating – You can set the ratings to block out all the programs with ratings
above a specified level.
[No Control]: You can view all programs.
[04 Years] – [18 Years]: Rating [04 Years] has the most restrictions and
[18 Years] is the least restrictive.
[Lock All]: All programs are locked. To view a program, you must change the
rating level you have set.
Set Password – Changes or deletes the password.
[Change]: Enter the new password twice after entering the current password.
[Delete]: Delete the current password by entering it.
Record Mode Set – Select the picture quality for recording in XP, SP, LP, EP or
MLP mode. See recording time of each mode on page 45.
[XP]: Highest picture quality.
[SP]: Standard picture quality.
[LP]: Slightly lower picture quality than [SP] mode.
[EP]: Low picture quality.
[MLP]: The longest recording time with the lowest picture quality.
Record Aspect – This option sets the recording aspect ratio to suit the material
you are recording on DVD.
DV Record Audio – You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN jack.
Some digital camcorders have two stereo tracks for audio. One is recorded at
the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound is recorded while shooting.
On the Audio 2 setting, the overdubbed sound is used.
21
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 22
TV Record Audio – Select an audio channel to record when recording a bilingual program.
[Main+Sub]: Main language and sub language
[Main]: Main language only
[Sub]: Sub language only
Auto Chapter – When DVD recording, chapter markers are added automatically
in every specified interval (5, 10 or 15 min.).
AV2 Recording – Selects a method of inputting video signals for the
AV2(DECODER) jack. The picture will not be clear if this setting does not match
the type of the video input signal.
[Auto]: The video input signal will automatically follow the video signal
received.
[CVBS]: Inputs CVBS(composite) video signals.
[RGB]: Inputs RGB signals.
[S-VIDEO]: Inputs S-Video signals.
Finalize – Finalizing is necessary when you wish to playback a DVD which you
have made in order for it to work with another DVD player. How long finalization
takes depends on the disc condition, recorded length and number of titles.
[Finalize]: The [Finalize] menu appears. The unit starts finalizing after
confirmation.
[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming
on the [Unfinalize] menu. After unfinalizing, the disc can be edited and
re-record.
Before finalizing, check the characteristics between the disc type in the table
below.
The finalized DVD-RW discs can be unfinalized
so that the disc can edit or recorded again.
-RW
+R
-R
Once you finalize a disc, you can not edit or
record anything on the disc.
+RW
Discs are automatically finalized when removed from
the unit.
RAM
The finalization is not required.
Adjust the disc settings
Disc Label – This function allows you to change the default disc name to
something more descriptive. This name appears when you load a disc and
display disc information on-screen. The keyboard menu appears by pressing
OK( ) while [Edit] is selected.
Disc Protect – This function allows you to protect discs from accidental
recordings, erasure and editing by setting this option to [ON]. The DVD-R Video
mode DVD-RW are not available to protect.
Disc Format – You can Initialize a DVD by pressing OK( ) while [Start] is
selected. The [Disc Format] menu appears. The unit starts formatting after
confirmation. You can select a mode between VR and Video for DVD-RW discs.
Everything recorded on the DVD will be erased after formatting.
If you load a completely blank disc, the unit will initialize the disc automatically.
See “Formatting mode (new disc)” on page 5 for more information.
22
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 23
Adjust the network settings
Software Update – Your recorder is able to keep the built-in digital tuner up to
date with the latest software. You can either check for updates manually, or
have the unit do it automatically at regular intervals.
While the HDD/DVD recorder is updating, there may be a disruption in reception
for a few hours. The reception should return to normal after the update is
complete.
This unit must be plugged into AC power to receive updates. Do not unplug
your recorder while an update is in progress. The update is not available during
recording, Timeshift, viewing digital text or EPG menu.
[Standby mode] Updates the software when this unit is turned off. The check
mark appears when this option is selected.
[Operation Mode] Update the software when this unit is turned on. The check
mark appears when this option is selected.
[Time] Set the time to update the software.
[Freq] Selects the updates interval.(Weekly or Daily)
[Start] Updates the software immediately.
System Information – Shows system information. (software version,
DTV Signal Quality and DTV Signal Strength)
DTV Diagnostics – To assist in locating any problems you may experience, the
unit includes DTV diagnostics options. This option gathers information about
DTV signals to troubleshoot DTV-related problems.
Highlight the [Start] option then press OK( ) to show diagnostic information.
To show details about multiplexer, use v /V to highlight a multiplexer then
press OK( ).
23
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 24
Setting the sound mode
Adjust the test tone settings
The related information of the selected button appears on the active
subwoofer display.
You can adjust the speaker levels and balance while listening to the test tone
from your listening position.
Press TEST TONE to select the test tone mode.
A hiss noise comes out for 2 seconds from each speakers in the follwing order:
TEST FL (Front Left ) t TEST CEN (Center) t TEST FR (Front Right) t
TEST SW (Subwoofer)
You can adjust the sound level of each speaker during operating the test tone,
first press LEVEL/AV Sync then press v V, so that all speaker's sound level is
same from the listener's position. If the setting is complete, press TEST TONE.
VSM (VIRTUAL SOUND MATRIX)
You can select the virtual sound. Press VSM to set the virtual sound.
[BYPASS] mode : Software with multichannel surround audio signals is played
according to the way it was recorded.
2Ch source
[VSM] mode: Realtime 3D positioned sound rendering technology with
stereo sources, optimized for stereo speakers. Listeners may experience
amazing virtual surround effects with their own multimedia players.
5.1Ch source
[VSM] mode: Listeners may experience virtul surround effects in the 5.1 ch
from the right and left speakers and center speaker.
Set a pre-programmed sound field
This system has a number of pre-set surround sound fields. Select the one
which best suits the program you are watching by pressing EQ repeatedly to
cycle through the options: NORMAL, NATURAL, POP, CLASSIC, ROCK, JAZZ
Adjust the level settings
Adjust the speaker level settings
You can adjust the sound level of each speaker.
Press LEVEL/AV Sync to adjust the sound level.
The level indicator will appear on the active subwoofer display.
Use b B to select a desired speaker to set.
Each time you press b B, it is changed as the following order:
LEV FL (Front Left) t LEV C (Center) t LEV FR (Front Right)
t LEV SW (Subwoofer)
Use v V to adjust the sound level of the selected speaker.(-10dB ~ +10dB)
Repeat and adjust the sound level of the other speakers.
24
Adjust the AV Sync settings
Sometimes Digital TV encounters a delay between picture and sound. If this
happens you can compensate by setting a delay on the sound so that it
effectively 'waits' for the picture to arrive: this is called AV Sync.
Press LEVEL/AV Sync twice.
Use PRESET+ or PRESET- to scroll up and down through the delay amount,
which you can set at anything between 0 and 300m sec. (10m sec/value)
If the setting is complete, press LEVEL/AV Sync.
The delay will vary depending on which digital TV channel you are on.
If you change channel you may need to readjust the AV Sync.
This function does not work when the active subwoofer is set to FM tuner.
Using the late night function
You can compress the dynamic range of the sound track.
Press DRC repeatedly.
This may be useful when you want to watch movies at low volumes late at
night. Dynamic range compression is possible with Dolby Digital sources only.
This function is valid only when you set the Dolby Digital to Bitstream in the
setup menu.
NIGHT OFF - Late night function off.
NIGHT STD - Small reduction in dynamic range.
NIGHT MAX - Large reduction in dynamic range.
The late night function may be less effective or have no effect depending on the
Dolby Digital source.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 25
Moving to another title HDD
Displaying disc information
ON REMOTE
1 Play the disc loaded on the unit:
PLAY
DVD ALL
When a disc has more than one title, you can move to another title.
Press INFO (i) twice during playback then use v / V to select the title icon.
Then, press the appropriate numbered button (0-9) or b / B to select a title
number.
2 Displays current status of playback:
INFO (i)
3 Displays the playback menu:
INFO (i)
Starting playback from selected time HDD
4 Select an item:
vV
Press INFO (i) twice during playback. The time search box shows the elapsed
playing time. Select the time search box and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a scene
at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press OK( ).
If you enter the wrong numbers, press b / B to move the under bar (_) to the
wrong number, then enter the correct numbers.
5 Adjust the playback menu settings:
bB
6 Exit the disc playback menu:
INFO (i)
Displaying disc Information - more you can do
DVD ALL
DivX
Adjusting playback menu item
Selecting a subtitle language DVD
You can select an item by pressing v V and change or select the setting by
pressing b B.
During playback, press INFO (i) twice to display the playback menu. Use v V to
select the subtitle option then use b B to select desired subtitle language.
DivX
OR
a
b
c
d
e
f
g
During playback, press SUBTITLE then press b B repeatedly to select a
desired subtitle language.
Watching from a different angle DVD
If the disc contains scenes recorded at different camera angles, you can change
to a different camera angle during playback.
During playback, press INFO (i) twice to display the playback menu. Use v V to
select the angle option, then use b B to select desired angle.
Selecting a sound mode DVD ALL
a
b
c
d
e
f
g
Current title/track/file / Total number of titles/tracks/files
Current chapter / total number of chapters
Elapsed playing time
Selected audio language or audio channel
Selected subtitle
Selected angle / Total number of angles
Selected sound mode
DivX
This HDD/DVD recorder can produce a 3D Surround effect, which simulates
multi-channel audio playback from two conventional stereo speakers, instead of
the five or more speakers normally required to listen to multi-channel audio from
a home theatre system.
During playback, press INFO (i) twice to display the playback menu. Use v V to
select the sound option then use b B to select desired sound mode
(3D SUR. or NORMAL).
25
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 26
Displaying information while watching TV
Changing TV program
Whilst using the HDD/DVD recorder to watch TV, Press INFO (i) to display the
information displayed
on-screen.
Use PR(+/-) on the remote control to change the programs in memory or use
numbered (0-9) buttons to select a program directly.
Changing program with numbered (0-9) buttons may not available when you are
using digital text service.
e
a
b
c
Changing TV program with program list
You can display the TV program list using the PR LIST button and switch to
other TV programs on the channel list.
While watching a program, press PR LIST to display the TV program list.
Select your desired channel using the v / V and press OK( ) to change the TV
program.
d
Switching the program list
You can switch the program list to DIGITAL TV, ANALOG TV or RADIO.
a Indicates channel number, station name, and audio signal
(Stereo, Bilingual, Mono) received by the tuner.
(The audio signal indication is available only for the analog channels.)
b Indicates media name and format.
c Indicates the record mode, free space, and elapsed time progress bar.
d Indicates current date and time.
e Indicates program title, start time, end time, etc.
(Extended Text Message Icon): Indicates that there is an Extended
Text Message available to provide detailed descriptions of the program
(see page 27).
(DTV Subtitle Icon): Indicates that the current program contains the
subtitle.
(Wide Icon): Indicates that the current program is shown in wide
picture format.
(Digital Text Service Icon):
Indicates that there is a digital text service available (see page 28).
26
Press v to move the highlight position to top of the program list.
Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected
program list appears.
Displaying the favorite program list
You can display the favorite channel list which contains your favorite channels.
To set a favorite program, use [Program Edit] option in the Setup menu.
(page 19.)
Press FAV button while watching a TV. The favorite options appears.
Press v V to select a desired program then press OK( ) to watch the selected
program.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 27
Switching the EPG menu
Using the digital EPG
ON REMOTE
1 Displays the EPG menu:
GUIDE
2 Select a TV program:
vV
3 Displays the next/previous menu list:
.>
4 Shows the selected program currently on air:
OK (
5 Exit the EPG menu:
GUIDE or BACK
The EPG screen provides two search menus.
Press the yellow coloured button when the EPG menu is displayed.
Now/Next: This screen shows now and next programs.
)
Using the digital EPG - more you can do
About the digital EPG
The digital EPG shows a table of scheduled digital TV programs and detailed
information about individual programs. The digital EPG screen consist of
program information, and the channel list.
Note that the unit’s clock must be set to the correct time and date to ensure all
relevant EPG information is displayed.
8 Days: This screen shows programs within 8 days. When the EPG menu
with 8 days is displayed, you can also change the date of the EPG menu by
pressing the green coloured button then use b / B to select the date.
Displaying the detailed Information window
You can view detailed information for the highlighted program. Press blue
coloured button to display detailed information window. To exit the detail
information window, press the blue coloured button again.
You can set a timer record using the 8 days EPG menu. Select a program
then press red coloured button. The options for timer recording will appear.
[Simple Recording]: Records only the selected program.
[Recording series]: Records the programs in series.
[Recording separated program]: Records the subsequent parts of a
program which are separated.
[Recording recommended program]: Records the program if recommended
by broadcaster as a link for the current series.
Select an option then press OK( ). The timer icon will be displayed and the
program will be memorized by the recorder. You can check the programming
on the Timer Record List menu (see page. 34).
To cancel the timer recording, select the program then press the red coloured
button. Select the option again then press OK( ). The timer icon disappears.
27
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 28
Viewing a digital text service
Many digital TV channels broadcast information via their text service. This
digital service includes high quality digital text and graphics along with
advanced navigation options. Additionally, this recorder has access to dedicated
text channels transmitted by the broadcasters. The appearance, content and
navigation methods of all digital text services are decided by the broadcaster.
Press TEXT to bring up the text menu for the current channel. Use v / V to
navigate through the menu. Use OK( ) to select an item. Additionally you now
have the four coloured buttons (Red, Green, Yellow and Blue) to navigate
through the content of the page. The use of these coloured buttons will be
displayed on the screen. Press TEXT or BACK (O) to leave the digital text
service.
What is FREEVIEW PLAYBACK?
FREEVIEW PLAYBACK™ gives you over 40 FREEVIEW™ channels that you
can pause, record and rewind with no monthly subscription.
To check you’re in a FREEVIEW coverage area, text your postcode to 83331*
or visit www.freeview.co.uk
* Costs no more than a normal text. The FREEVIEW service is subject to
coverage.
The FREEVIEW service is subject to coverage. An aerial upgrade may be required.
The FREEVIEW PLAYBACK word and logo are trade marks of DTV Services Ltd
and are used under licence. © DTV Services Ltd 2006.
Play a disc
ON REMOTE
1 Open the disc tray: Z on front panel
-
2 Insert a disc:
-
3 Close the disc tray: Z on front panel
-
4 Adjust the disc menu settings:
A disc menu may not appears on the screen
depending on the disc.
v V b B, OK (
5 Starts playback:
N)
PLAY (N
6 Stops playback:
x)
STOP (x
)
To listen to the output sound from HDD/DVD recorder, you must set
the active subwoofer to DVD/TV by pressing FUNCTION.
Play a disc - more you can do
Playing a disc that contains a menu DVD
The menu screen may be displayed first after loading a DVD which contains a
menu.
Use the b / B / v / V buttons to select the title/chapter you want to view, then
press OK( ) to start playback. Press TITLE or MENU/LIST to return to the
menu screen.
Skip to the next/previous chapter/track/file
HDD
DVD ALL
ACD
MP3
WMA
DivX
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
28
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 29
Pause a playback
Playing repeatedly HDD
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter, folder or track will be played back repeatedly. To return to normal
playback, press REPEAT repeatedly to select [OFF].
Frame-by-Frame playback HDD
DVD ALL
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
You can advance or back up the picture frame-by-frame by pressing b / B
repeatedly during PAUSE mode.
Fast forward or fast reverse
HDD
DVD ALL
ACD
DVD ALL
ACD
Repeating a specific portion (A-B) HDD
MP3
WMA
DVD ALL
ACD
Press REPEAT to select [A-] at the beginning of the portion you wish to repeat
and press OK( ) at the end of the portion. Your selected portion will be
repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press REPEAT repeatedly to select [OFF].
DivX
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speeds by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Hearing a different audio HDD
DVD ALL
DivX
Last Scene Memory DVD
This unit memorizes the last scene from the last disc that was viewed. The last
scene remains in the memory even if you remove the disc from the player or
switch off the unit. If you load a disc that has the scene memorized, the scene
is automatically recalled.
Press AUDIO then press b or B repeatedly to hear a different audio language,
audio track or encoding method.
Slow down the playing speed HDD
DVD ALL
While playback is paused, press SCAN(bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal
speed.
Viewing the Title menu DVD
Press TITLE to displays the title menu or disc menu. If the current DVD title has
a menu, the title menu appears on the screen. Otherwise, the disc menu may
appear.
29
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 30
Divx file requirement
Playing DivX® movie files
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [MOVIE] option:
bB
3 Selects an option that contains DivX file:
v V, OK (
4 Selects a movie file from the menu:
vV
5 Plays the selected movie file:
PLAY
6 Stops the playback:
STOP
)
To listen to the output sound from HDD/DVD recorder, you must set
the active subwoofer to DVD/TV by pressing FUNCTION.
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”, “DX50”
Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”, “WMA”
Sampling frequency: within 8-48 kHz (MP3), within 32-48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Notes on DivX format
Playing a DivX movie files - more you can do
Movie List menu options
®
Select which file you would like to show from the menu and press OK(
option menu appear on the left side of the screen.
). An
[Play]: Starts playback the selected file.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) of folder (s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
Displaying movie file information
Press INFO (i) to show the file information on the highlighted file in the movie
list.
30
The DivX subtitle file name has to be identified with the DivX file name to be
displayed on the HDD/DVD recorder.
If the subtitle file does not display properly, change the language code in the
[DivX Subtitle] option. (page 20)
If the number of the screen frame is over 29.97 frames per second, the
HDD/DVD recorder may not operate normally.
If the video and audio structure of the DivX file is not interleaved, the audio
and video output may not be matched properly.
If the DivX file name is not readable on this HDD/DVD recorder, it may be
displayed as “_” mark.
If the bitrate of a DivX file stored on a USB device is over 4Mbps, the file
may not be played correctly.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 31
Selecting multiple files or folders on the list
Copying file(s) or folder(s) to the HDD
You can select not only a single file but also multiple files using the
MARKER button. Press MARKER on the desired file(s) to select multiple
files.
You can copy file(s) or folder(s) to the HDD.
Selecting all files and folders on the current list
If you want to select all files and folders on the list, press CLEAR at any
file or folder on the list. Press CLEAR again to deselect files and folders.
This function is not available for Audio CD.
Naming a file or folder on the HDD
Select file(s) or folder(s) you would like to copy then press OK( ). Select [Edit]
option then press OK( ) to show sub options. The [Copy] menu appears by
pressing OK( ) while [Copy] option is selected. Select a directory that you
would like to copy to. Select the [Copy] option then press OK( ) to begin
copying.
Moving file(s) or folder(s) to the other folder on the HDD
You can name a file or folder on the HDD.
Select a file or folder you would like to rename then press OK( ). Select [Edit]
option then press OK( ) to show sub options. The keyboard menu appears by
pressing OK( ) while [Rename] option is selected.
You can move file(s) or folder(s) to the other folder on the HDD.
Select file(s) or folder(s) you would like to move then press OK( ). Select [Edit]
option then press OK( ) to show sub options. The [Move] menu appears by
pressing OK( ) while [Move] option is selected. Select a directory that you
would like to move to. Select the [Move] option then press OK( ) to begin
moving.
31
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 32
Displaying MP3/WMA file information
Listening to a music
Press INFO (i) while on file you wish to show the file information.
This HDD/DVD recorder will show the ID3-Tag information of the file. If the file
does not have ID3-Tag information, [ID3-Tag: None] appears on the screen.
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a [MUSIC] option:
bB
3 Selects an option that contains music:
v V, OK (
4 Selects a music from the menu:
vV
5 Plays the selected music:
PLAY
6 Stops the playback:
STOP
MP3/WMA audio file requirement
File extensions: “.mp3”, “.wma”.
)
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Listening to a music - more you can do
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Creating your own program
Music List menu options
Select which file/track you would like to play from the menu and press OK(
The menu will appear on the left side of the screen.
Audio CD
MP3/WMA
[Play]: Starts playback on the selected file/track.
[Random]: Starts or stops random playback.
[Open]: Opens the folder and a list of files in the folder appear.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Program Add]: Adds a file(s)/track(s) to [Program List].
[Save]: Saves a [Program List] that you have arranged in the HDD.
[Load]: Loads a saved [Program List] in the HDD.
32
).
You can play the contents in the order you want by arranging the order of the
music. The program is cleared when you exit the [Music List] screen.
To add or erase a music(s) on the program list, press MENU/LIST to display the
[Program List].
Select a desired music from the [Music List] then press OK( ). If you want to
select multiple files/tracks, press MARKER on the desired files/tracks. Select
the [Program Add] option then press OK( ) to add the selected files/tracks to
the [Program List]. Select a files/tracks from the [Program List] then press PLAY
to start the programmed playback.
You can change the playing order using [Move] option on the program list
menu.
Erasing tracks/files from Program List
To delete a files/tracks from the program list, select the files/tracks you wish to
delete then press OK( ). An option menu will appear on the left side of the screen.
Select the [Delete] option then press OK( ) to erase the files/tracks from the
list.
Save your Program List (HDD only)
This unit memorizes the [Program List] that you have programmed. Select a file
on the [Program List] then press OK( ). Select the [Save] option then press
OK( ) to save the [Program List].
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 33
Rotate a photo
Viewing a photo
Use vV to rotate the photo when the photo is fully displayed on the screen.
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [PHOTO] option:
bB
3 Selects an option that contains photo file:
v V, OK (
4 Selects a photo from the list:
vVbB
5 Displays the selected photo in full screen:
PLAY
6 Returns to the Photo List:
STOP
To slide show photos in the [Photo list], select the [Slide Show] option on the left
side of the screen then press OK( ), The [Slide Show] menu appears on the
screen. Set the [Object] and [Speed] options then press OK( ) when [Start]
option is selected. The slide show will now begin.
)
[Object] option:
[Selected] Views slide show only selected files.
Use the MARKER button to select multiple files.
[All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or [Fast].
Viewing a photo - more you can do
Listening to music during slide show
Photo List menu options
Select which file you would like to show from the menu and press OK(
A menu appears on the left side of the screen.
Viewing photo files as a slide show
).
You can slide show photo files while listening to MP3/WMA music files on HDD.
Press OK( ) while [Simultaneous Music play] option is selected on the [Slide
Show] menu. The music file selection menu appears on the screen. Press
MARKER at the desired files to play then press OK( ) while [Start] option is
selected. The unit starts slide show with music playing.
[Select All]: Select all files in current directory.
[Deselect All]: Deselect all files.
Pause a slide show
Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide
show.
Photo file requirement
[Full Screen]: Shows the selected file in full screen.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Slide Show]: Displays the [Slide Show] menu.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo when the photo is
fully displayed on the screen.
File extension: “.jpg”
Photo size: Less than 4MB recommended
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Notes on JPEG file
Progressive and lossless compression JPEG image files are not supported.
Depending on the size and number of the JPEG files, it may take several
minutes to read the contents of the media.
33
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 34
Setting a timer record
Recording
Follow the instruction below to record a TV channel or
other source. The recording continues until the media
is full, you stop the recording or the progress of
recording is more than 12 hours.
This HDD/DVD recorder can be programmed to record up to 16 recordings
within a month. The clock must be set correctly before setting a recording.
ON REMOTE
1 Selects a recording mode:
You can select a recording mode on the
SETUP menu. (XP, SP, LP, EP or MLP)
HOME,
v V b B,
OK ( )
2 Selects a recording media:
HDD or DVD
3 Selects a channel or source you want to record: PR(+/-), AV
4 Starts recording:
REC
5 Stops recording:
STOP
Recording - more you can do
Changing TV audio channel
Before recording, you can change the TV audio channel for stereo and bilingual
broadcast. Press AUDIO repeatedly to change the audio channel. The current
audio channel is displayed on-screen. Set the [TV Rec Audio] option in the
SETUP menu when recording a bilingual broadcast.
Instant timer recording
This feature will allow you to instantly record a programme for a preset time.
When the REC is first pressed, recording starts. Press REC repeatedly to select
the desired time. Each press of REC will increase recording time on-screen.
You can set the instant timer recording up to 240 minutes on HDD or up to 720
minutes on DVD, depending on the free space available.
34
Press HOME and select TV option. Press v V to select the [Timer Record] and
press OK( ) to display [Timer record List] menu. Use v V to select [New] and
press OK( ) to display [Timer Record] menu. Adjust each field as described
below using v V b B.
[Media]: Choose a media to record (HDD or DVD).
[CH/PR]: Choose a memorized program number, or one of the external
inputs from which to record. (You cannot select DV input and radio channel.)
[Date]: Choose a date up to 1 month in advance.
[Start Time]: Set the start time.
[End Time]: Set the end time.
[Repeat] Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly).
Recordings from EPG menu will always be set to [Once].
Press REC repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then
press OK( ) to set a timer recording. The “Rec OK” or “OK” on the [Check]
field on the [Timer Record List] menu indicates the timer recording is
programmed correctly.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 35
Canceling a timer recording
Time Slip
You can cancel a timer recording before the timer actually starts. Select a timer
recording that you want to cancel on the [Timer Record List] menu and press
CLEAR.
You can watch the title that you are currently recording to HDD with this
function. After the recording is progressed over 15 seconds, press PLAY to
playback the title that you are currently recoding. If you stop playback the title,
returns to the current recording position.
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc loaded and there is not free space on the HDD.
– A non-recordable disc is loaded and there is not free space on the HDD.
– [Disc Protect] option is set to [ON] in the Setup menu and there is not free
space on the HDD (see page 22).
– The HDD/DVD recorder is in operating a function (recording, copying,
deleting etc.).
– There are already 99 titles (DVD-RW, DVD-R),or 49 titles (DVD+R,
DVD+RW) recorded on the disc and there are already 255 titles recorded
on the HDD.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Simultaneous playback and record
Recording from a digital camcorder
You can record form a DV-equipped camcorder to the HDD by connecting it
with a DV cable. You can also record form a digital camcorder connected to the
DV in jack on the front of the unit. Press AV repeatedly to select the DV input.
Find the place on the camcorder recording that you want to begin recording
from and press REC on the HDD/DVD recorder to start recording. Depending
on your camcorder, you can use this recorder’s remote to control the camcorder
using the STOP, PLAY and PAUSE functions. Press STOP to end recording.
Recording from external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder’s external inputs.
Each press of the AV button changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the HDD/DVD recorder before recording an external source.
Tuner: Built-in tuner
AV1: AV1 scart jack mounted on back panel
AV2: AV2 DECODER scart jack mounted on back panel
AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
DV: DV IN mounted on front panel
You can play other contents while you are recording. Simply press HOME and
select the playable contents you want to play while recording. You cannot
playback other contents while copying or dubbing. The DivX file cannot be
played while recording. When you recording on a DVD, the contents on the
DVD cannot be played.
35
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 36
Using time shift function
This feature allow you to pause or rewind live TV, so you do not miss a thing if
you were interrupted.
Press TIME SHIFT then press PAUSE/STEP while watching live broadcast
before answering the phone. The timeshift function will record the broadcast of
later viewing. Before using this function, make sure that the unit is in HDD
mode.
If no button is pressed for 6 hours, the timeshift will stop automatically. You can
use trick play functions (slow, scan, etc.) during timeshift. Refer to playback
operation on page 28-29.
Stop timeshift by pressing STOP and confirm by pressing OK(
returned to watch a broadcast in real time.
). You will
Editing a title
Using the Title list menu,you can edit video contents.
ON REMOTE
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to edit:
vVbB
4 Displays an editing menu:
OK (
The options are differ depending on the media type.
)
5 Selects a menu option:
v V b B, OK (
6 Exit the [Title List] menu:
BACK
)
Jump to start or end during timeshift
Press OK( ) to show progress bar during timeshift. Press b to jump to the
beginning and B to jump to the end of the timeshift.
Clip recording
If you want to record a timeshifted program as a title, press REC at the starting
point and ending point you want to record. The timeshift progress bar indicates
a clip that you select with red bar. You can make more clips by repeating this
instruction. The clips will be recorded when you exit the timeshift function.
Editing a title - more you can do
About title list menu
Press MENU/LIST to display the Title List menu. Playback should be stopped
when you do this. You can also access it using HOME menu, select [MOVIE]
option then select [HDD] or [DISC] option and press OK( ). If you are editing a
VR mode disc, press MENU/LIST to switch between Original and Playlist menu.
a
b
d
e
f
c
a Current media
b Indicates the record mode, free space, and elapsed time progress.
c Menu options: To display menu option, select a title or chapter then press
OK( ). The options displayed differ depending on the disc type.
d Currently selected title.
e Thumbnail
f Shows the title name, recorded date, and recording length.
36
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 37
Before editing
Chapter search HDD
This HDD/DVD recorder offers various editing options for various disc types.
Before you edit, check the disc type, and select the option available for your
disc.
You can select the start of a title by searching a chapter. Select a title that you
want to search and press OK( ). Select [Chapter] in the [Search] option from
the menu on the left of the screen, and press OK( ) to display the [Chapter
List] menu.
You can enjoy advanced editing functions with VR mode formatted DVD
(DVD-RW or DVD-RAM). Editing either the original recording(called the
“original”), or the playback information created from the original (called a
“Playlist”).
Edits made to the original titles are final. If you plan to edit a title without editing
the original title, you can create a Playlist title for editing.
A Playlist is a group of Playlist titles created from the original title for editing
purpose.
-RWVR
-RWVideo
+RW
+R
-R
RAM
Use v V b B to find the chapter you wish to start playback, and press PLAY to
start.
Making a new Playlist -RWVR
RAM
The Playlist allows you to edit or re-edit a title or chapter without changing the
Original recordings. Use this function to add an Original title or chapter to a new
Playlist or the registered Playlist.
Titles in the disc’s original content contain one or more chapters. When you
insert a disc’s title into the Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a
DVD-Video. From the Original and Playlist menu you can add or delete parts.
Adding a chapter or title to the Playlist creates a new title made up of a section
(ie., chapter) of an Original title. Deleting a part removes part of a title from the
Original or Playlist menu.
Adding chapter markers HDD
-RWVR
+RW
+R
RAM
You can create chapters within a title by inserting chapter marks at the desired
point. Press MARKER at the desired point whilst playing back or recording.
A chapter marker icon appears on the screen. Adding a chapter while recording
is not available for HDD title.
The chapter markers can be added at regular intervals automatically by setting
the [Auto Chapter] option in the SETUP menu.
Select an Original title or chapter that you want to put into the Playlist then
press OK( ). Select the [Playlist Add] option and then press OK( ) to display
the [Select PlayList] menu. Choose a Playlist-title that you want to put the
selected Original title or chapter to, or select the [New PlayList] to create a new
Playlist.
Deleting a title or chapter
Moving a Playlist chapter -RWVR
When you delete a title or chapter from the Playlist, the title or chapter in the
Original still remains. However, if you delete a chapter or title from the Original,
the title or chapter deleted from the Original are also removed from Playlist.
Use this function to re-arrange the playing order of a Playlist title on the
[Chapter List-Playlist] menu. Select [Move] option from the menu on the left of
the [Chapter List-Playlist] screen and press OK( ). Use v V b B to choose the
place you wish to move the chapter then press OK( ). The updated menu is
displayed
Select a title or chapter that you wish to delete and press OK( ). Select
[Delete] option from the menu on the left of the screen and press OK( ) to
confirm.
RAM
HDD – You can delete multiple files using the MARKER button. Press the
MARKER button at the desired files to select multiple files and then follow the
instruction above.
37
HR403DAM-P.BGBRLL ENG
Time search HDD
7/8/08
-RWVR
2:22 PM
-RWVideo
+RW
Page 38
+R
-R
Viewing Title List menu displayed on another unit +RW
RAM
You can select the start of a title by searching through the time duration. Select
a title that you wish to search and press OK( ). Select [Time] in the [Search]
option from the menu on the left of the screen and press OK( ) to display the
[Search] menu.
+R
You can view the Title List menu displayed on the another unit that is capable
of playing DVD+RW or DVD+R discs.
Press TITLE in play or stop mode. Title List menu will appears on the screen.
When the TITLE button is not available due to the digital broadcasts, press and
hold the MENU/LIST for 3 seconds to display the Title List.
Dividing a title HDD
+RW
Use this function to split a title up into two titles. Select a title that you wish to
divide and press OK( ). Select [Divide] in the [Edit] option from the menu on
the left of the screen and press OK( ) to display the [Divide] menu. Find the
point you wish to divide a title using PLAY, SCAN, PAUSE/STEP buttons and
press OK( ). The playback screen shows the divided point. Select [Done]
option and press OK( ) to divide. You cannot select a dividing point if it is less
than 3 seconds.
Use b B to find the time you want to start. Each press of b B moves 1 minute
or press or hold b B to moves 5 minutes. Press OK( ) to watch a title from a
selected time.
Protect a title -RWVR
Sorting the titles HDD
Press OK( ) to bring up the options menu. Select [Sort] option and press
OK( ) to view the further options. Here you can choose to sort titles according
to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category]
(sort by genre).
+RW
+R
RAM
Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press OK( ). Select [Protect] option
from the menu on the left and press OK( ). The lock mark will appears on the
title thumbnail.
If you want to unprotect the title, select the protected title and press OK(
Select [Unprotect] option from the menu on the left and press OK( ) to
unprotect it.
Combining titles HDD
Deleting a part HDD
Use this function to merge the selected title with another title. Select a title and
press OK( ). Select [Combine] in the [Edit] option then press OK( ). Select a
title you want to combine with current title and press OK( ) to confirm.
You can delete a part which you do not want in the title.
Hiding a chapter or title +RW
+R
You can skip through a chapter or titles without actually deleting them. Select a
chapter or title you want to hide and press OK( ). Select [Hide] in the [Edit]
option then press OK( ).
If you wish to recover the hidden title or chapter, select the hidden title or
chapter and press OK( ). Select [Show] in the [Edit] option then press OK(
to recover it.
38
)
-RWVR
).
RAM
Select a title that you wish to delete part and press OK( ). Select [Delete Part]
in the [Edit] option from the menu on the left of the screen and press OK( ) to
display the [Delete part] menu. You can find the point using PLAY, SCAN,
PAUSE/STEP buttons.
[Start Point]: Select starting point of a part that you wish to delete then press
OK( ).
[End Point]: Select ending point of a part that you wish to delete then press
OK( ).
[Next Part]: Press OK( ) to delete a additional part (HDD only).
[Cancel]: Press OK( ) to cancel the selected part.
[Done]: Press OK( ) to delete the selected part.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 39
Naming a title
When a title is recorded by this HDD/DVD recorder, the title name will be
named by a number. You can change a title name by using this function.
The first chapter is selected.
The chapters that you want to combine are created by deleting a part from
the Original title.
The chapters that you want to combine are created from different titles.
One of the Playlist chapters that you want to combine has been moved.
Using the Disc menu
Using the title list menu in DVD mode, you can use the disc setting functions
without entering the SETUP menu.
Select the title that you wish to change the name and press OK( ). Select
[Rename] or [Title Name] option from the menu on the left of the screen and
press OK( ) to display the keyboard menu. Use v V b B to select a character
then press OK( ) to confirm your selection on the keyboard menu.
[OK]: Finish the naming.
[Cancel]: Cancels all entered characters.
[Space]: Inserts a space at the cursor position.
[Delete]: Deletes the previous character at the cursor position.
You can use shortcuts on the remote control to enter a name.
PLAY (N): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes a character behind the cursor position.
x (STOP), CLEAR: Deletes the previous character at the cursor position.
. / >: Moves the cursor to left or right.
MENU/LIST, INFO (i): Changes the character set on the keyboard menu.
Numbers (0-9): Enters the corresponding character at the cursor position.
You can apply a genre for a selected title on HDD. When a character is
highlighted on the keyboard menu, keep pressing b until the curser jumps
across to the Genre field. Choose desired genre and press OK( ) to select it.
The chosen genre name will appear at the lower right corner of the title thumbnail.
Combining chapters HDD
-RWVR
+RW
+R
RAM
Use this function to merge the selected chapter with adjacent chapter. Select a
chapter and press OK( ). Select [Combine] option to view the combine
indicator between the chapter thumbnails. Press OK( ) to combine the
indicated two chapters.
Use v V b B to select the [Disc] option on the DVD title list menu and then
press OK( ) to show further options.
[Disc Format]: Format the inserted disc. (page 22)
[Finalize]: Finalize the inserted disc. (page 22)
[Unfinalize]: Unfinalize the inserted disc. (page 22)
[Disc Label]: Use this to enter a name for the disc. This name appears when
you load the disc and disc information on-screen. (page 22)
[Protect]: Use this to prevent accidental recording, editing, deleting of the
inserted disc. (page 22)
[Unprotect]: Release the protect function.
Overwriting +RW
You can overwrite a new video recording on a recorded title that is not
protected. Select the TV channel or input source you want to record. Press
MENU/LIST to display the Title List menu. Use v V b B to highlights a title you
want to overwrite and then press REC to start overwrite. To stop the recording,
press STOP.
If you overwrite the longer recording than the current title on the fully recorded
disc, the next title is overwritten. If next title is protected, the overwriting stops at
the starting point of the title.
This function is not available in conditions as listed below.
There is only one chapter within the title.
39
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 40
About ‘Fast’ copying
Dubbing a title
Using the title list menu, you can dub video contents.
ON REMOTE
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to dub:
vVbB
4 Displays an editing menu:
OK (
5 Selects the [Dubbing] option:
vV
6 Displays the [Dubbing] menu:
OK (
7 Sets the [Rec mode] option:
XP, SP, LP, EP, MLP, AUTO or Fast modes
vVbB
8 Highlights the [Start] icon:
vV
9 Starts dubbing:
OK (
)
)
Copying between DVD and HDD is a complete digital process and therefore
involves no loss of quality in the audio or video. This allow for high speed
copying for ease and convenience.
When copying from HDD to DVD, the speed of copying depends on the
recording mode and the kind of DVD disc you’re using. The Fast copying is
available for unedited original video titles, and may not be possible when using
disc initialized on another recorder.
When you dubs a title from the DVD to HDD, only a VR mode formatted disc
can use [Fast] mode.
When you dubs a title from the HDD to VR mode DVD-RW or DVD-RAM, the
[Fast] mode is not available for edited HDD title and Clip Recording title. And
dub a edited title from VR mode DVD-RW or DVD-RAM to HDD also cannot
use [Fast] mode.
Dub multiple titles from HDD to DVD HDD
)
You can select not only a single title but also multiple titles using MARKER
button. Press MARKER at the desired titles to select multiple titles, and press
OK( ) to display the menu on the left of the screen. Select [Dubbing] option
from the menu on the left of the screen and press OK( ) to display the
[Dubbing] menu. Use v V b B to select [Start] icon then press OK( ) to
confirm.
Dubs a currently playing title +R
Dubbing a title - more you can do
Before dubbing
Use the copying features of this recorder to:
Back up important recordings stored on the HDD to a DVD.
Make a DVD copy of a recording on the HDD to play in another player.
Transfer video from a DVD to the HDD for editing.
Transfer edited video from the HDD to DVD.
40
-R
This feature copies a single title to the HDD in real time. When you start
copying, playback jumps back to the start of the title, then continues through to
the end of the title, when recording automatically stops. The copy will be made
in the recording mode (XP, SP, LP, EP or MLP) that is currently set in the
SETUP menu.
During DVD playback, press HOME to display the HOME menu. Select the
[Dubbing] in the [Easy Menu] option, and press OK( ) to start dubbing. The
[Dubbing] option in the HOME menu will activated only for a title from finalized
DVD±R, finalized with video formatted DVD-RW or DVD-ROM title without copy
protection.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 41
See information about a radio station
Listening to the radio
Be sure that FM antenna is connected.
ON REMOTE
1 Turn the power on:
AMP POWER 1
2 Select FM:
FUNCTION
3 Select a radio station:
TUN.-/+
4 To save a radio station:
A preset number will show on the active
subwoofer display.
Up to 50 radio stations can be saved.
MEMO./CLEAR
5 To confirm press:
MEMO./CLEAR
6 To select a saved station
PRESET-/+
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows
information about the radio station being listened to. Press RDS repeatedly to cycle
through the various data types:
PS
(Programme Service Name)
The name of the channel will appear in the display
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News) will appear in the display.
RT
(Radio Text)
A text message contains special information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as broadcast by the station.
Listening to the radio - more you can do
Look for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Choose a preset number for a radio station
When storing a radio station, the preset number can be chosen. When this unit
automatically shows a preset number, press PRESET -/+ to change it. Press
MEMO./CLEAR to save your chosen number.
Delete all the saved stations
Press and hold MEMO./CLEAR for two seconds. ERASE ALL will flash up on
the active subwoofer display. Press MEMO./CLEAR to erase all saved radio
stations.
Improve poor FM reception
Press MONO./STEREO. This will change the tuner from stereo to mono and
usually improve the reception.
41
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 42
Language Codes
Use this list to input your desired language for Disc Audio, Disc Subtitle and Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
42
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 43
Troubleshooting
General
The power does not turn on.
b Plug the power cord into the wall outlet securely.
There is no picture.
b Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
b Connect the video connection securely.
b Check the [Video Output Format] in SETUP menu is set to the
appropriate item that conforms to your video connection.
Picture noise appears.
b You are playing a disc recorded in a colour system that is different form
your TV.
b The video signal from the external component is copy-protected.
b Set the resolution which your TV accepts.
The channel is not found or stored.
b Check your antenna connection.
There is no sound.
b Connect the audio connection securely.
b The input source setting on the amplifier or the connection to the amplifier
is incorrect.
b The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b
b
b
b
Playback
The unit does not start playback.
b Insert a playable disc. (Check the disc type, colour system, and regional
code.)
b
b
b
b
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the Rating function or change the rating level.
Cannot play a disc recorded using this unit on other player.
b Finalize the disc.
b Check the disc compatibility of the player.
b Place the disc on the disc tray correctly inside the guide.
b Discs recorded with copy-once material cannot be played on other
players.
The angle cannot be changed.
b Multi-angles are not recorded on the DVD Video being played.
b The angle cannot be changed for the titles recorded on this unit.
The subtitle language cannot be changed or turned off.
b Subtitles are not recorded on the DVD Video being played.
b The subtitle cannot be changed for the titles recorded on this unit.
Cannot play MP3/WMA/JPEG/DivX files.
b The files are not recorded in a format that the unit can play.
b The unit does not support the codec of the DivX movie file.
b The resolution is higher than the unit can support.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
43
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 44
Recording
Cannot record or does not record successfully.
b Check the remaining space on the disc.
b Check that the source you are trying to record in not copy protected.
b The power may have failed during recording.
b Use a VR mode formatted disc for copy-once material.
Timer record does not record successfully.
b Clock is not set to correct time.
b The start time of the timer recording is past.
b Two timer recordings may have overlapped, in which case only the earlier
one will record completely.
b When setting the recording channel, make sure you set the unit’s built-in
tuner, not the TV’s built-in tuner.
Stereo Audio Record and/or Playback is not present.
b TV is not Stereo-compatible.
b Broadcast program is not in stereo format.
b The A/V Output jacks on the unit are not connected to TV A/V In jacks.
HDMI
The connected HDMI device does not display any picture.
b
b
b
b
Try disconnecting then reconnecting the HDMI cable.
Try switching the power of the HDMI device off then back on.
The video input of the connected device is set correctly for this unit.
The HDMI cable you are using is fully HDMI-compliant . Using a
non-standard cable may result in no picture being output.
b Not all HDCP-compatible DVI devices will work with this unit.
The connected HDMI device does not output sounds.
b Some HDMI-compatible devices do not output sounds (check the manual
that came with the connected device).
b If your TV is not capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu. When this choice
is made, this unit will automatically convert any 96 kHz signals to 48 kHz
so your system can decode them.
b If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu.
44
b If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu. To enjoy DTS multi channel surround, you must
connect this unit to a DTS compatible receiver via one of this unit’s digital
audio outputs.
Radio
Radio reception is poor.
b If the signal is too weak, adjust the antenna or connect an external
antenna for better reception.
Resetting the unit
If you observe any of the following symptoms.
The unit is plugged in, but the power will not turn on or off.
The front panel display is not working.
The unit is not operating normally.
You can reset the unit as follows.
Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 45
Audio recording format
Sampling frequency
Compression format
Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Net weight (approx.)
Operating temperature
Operating humidity
Television system
Recording format
AC 200-240V, 50/60 Hz
30W
430 X 49 X 275 mm (w x h x d) without foot
4 kg
5˚C to 35˚C
5 % to 65 %
Analog: PAL I, B/G, I/I, SECAM D/K, K1,
colour system
Digital: DVB-T Standard Compliant
PAL
Playback
Frequency response
Signal-to-noise ratio
Harmonic distortion
Recordable time
Video recording format
Sampling frequency
Compression format
DVD Video Recording, DVD-VIDEO
HDD (160GB), DVD-RW, DVD-R,
DVD+RW, DVD+R, DVD+R(Double Layer),
DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode),
2 hours (SP mode), 4 hours (LP mode),
6 hours (EP mode), 14 hours (MLP mode)
DVD+R DL (8.5GB): Approx. 3 hours
(XP mode), 3.8 hours (SP mode),
7.3 hours (LP mode), 9.1 hours (EP mode),
21 hours (MLP mode)
HDD (160GB, MPEG2 Recording):
Approx. 43 hours (XP mode),
84 hours (SP mode),
164 hours (LP mode),
233 hours (EP mode),
477 hours (MLP mode)
DVD (PCM 48 kHz): 8 Hz to 22 kHz,
CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
More than 90 dB (AUDIO OUT connector)
Less than 0.02% (AUDIO OUT connector)
Inputs
ANTENNA IN
VIDEO IN
Recording
Recording format
Recordable media
48kHz
Dolby Digital
AUDIO IN
DV IN
USB IN
Antenna input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 1
/ SCART x 2
2.0 Vrms more than 47 kohms, RCA jack
(L, R) x 1 / SCART x 2
4 pin (IEEE 1394 standard)
4 pin (USB 1.1 standard)
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI
Audio
Audio
Audio
video/audio output
output (digital audio)
output (optical audio)
output (analog audio)
1 Vp-p 75 Ω, sync negative, SCART x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative,
Mini DIN 4-pin x 1(C) 0.3 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,
RCA jack x 2
19 pin (HDMI standard, Type A)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), Optical connector x 1
2 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1 / SCART x 2
Tuner FM
27MHz
MPEG2
Tuning range
Intermediate frequency
87.50-108.00 MHz
10.7 MHz
45
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 46
Specifications (continued)
Amplifier
Stereo mode
Surround mode
80W + 80W (4 Ω at 1 kHz, THD 10%)
Left+ Right: 80W + 80W (THD 10%)
Center: 80W
Subwoofer: 160W (3 Ω at 30Hz, THD 10%)
Speakers
Type
Impedance
Rated input power
Max. input power
Net dimension(WxHxD)
Net weight
Left+ Right
1 Way 1 Speaker
4Ω
80 W
160 W
98 x 226 x 90 mm
0.8 kg
Type
Impedance
Rated input power
Max. input power
Net dimension(WxHxD)
Net weight
Center
1 Way 1 Speaker
4Ω
80 W
160 W
360 x 106 x 104 mm
1.0 kg
Type
Impedance
Rated input power
Max. input power
Net dimension(WxHxD)
Net weight
Power requirements
Power consumption
Active Subwoofer
1 Way 1 Speaker
3Ω
160 W
320 W
226 x 418 x 433 mm
11 kg
AC200-240V, 50/60 Hz
70 W
Design and specifications are subject to change without notice.
46
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 47
47
HR403DAM-P.BGBRLL ENG
7/8/08
2:22 PM
Page 48
Technology with the human touch
GUARANTEE
● LG Electronics U.K. Ltd. will provide the following services in order to
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be
replaced free of charge for a period of 12 months from the original date
of purchase.
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY
OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
● Product Registration Card :
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment,
for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday
9.00am-4.30pm
B. The dealer is not obliged to carry out service under guarantee if
unauthorized modifications are made to the apparatus, or if non
standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from
whom the equipment was originally purchased. The dealer may, before
carrying out service under guarantee, require a receipted account as
evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace
batteries if they become exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by
this guarantee.
This guarantee does not affect your statutory rights.
It is helpful to complete at least
your name, address, phone, model
& serial numbers and return it. This
will enable LG to assist you in the
future should you lose your receipt,
your units be stolen, or should
modifications be necessary.
MODEL NO.*
*
SERIAL NO.*
DATE OF PURCHASE.*
Please complete for your own record
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
Download PDF