LG | LH-RH760TF | LG LH-RH760TF Owner’s Manual

LH-RH7693TF_NA4ULLD_ENG_MFL30582426
HDD/DVD
Recorder Receiver
System
OWNER'S MANUAL
MODEL:LH-RH760TF
(Main Unit: LH-RH760
Speakers: LHS-76TF5S,
LHS-76TF5C, LHS-76TF5A)
USB
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Protect the power cord from
CAUTION
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily accessible.
such
CAUTION: THESE SERVICING INSTRUCTIONS
ARE FOR USE BY QUALIFIED SERVICE
PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED
IN THE OPERATING INSTRUCTIONS UNLESS
YOU ARE QUALIFIED TO DO SO.
as
SERIAL NUMBER:
You
should
Caution: The
apparatus should not be
exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases,
should be placed on the apparatus.
find the serial number
can
number is
guide
unique to this
record requested
as a
Model No.
Serial No.
on
the back of the unit. This
unit and not available to others. You
information here and retain this
permanent record of your purchase.
______________________________
______________________________
POWER: This unit
operates
on a
mains
supply
of
200-240V~,
50/60Hz.
WIRING: This unit is
supplied with a BSI 1363 approved 13 amp
mains plug, fused at 5 amp. When replacing the fuse always use
a 5 amp BS 1362, BSI or ASTA approved type. Never use this
with the fuse
plug
CAUTION: This
product employs
a
Laser
System.
To
proper use of this product, please
read this owner's manual carefully and retain
ensure
for future reference. Should the unit
maintenance,
contact
an
require
authorized service
Use of
controls, adjustments, or the
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
prevent direct exposure to
try to open the enclosure.
laser
beam, do
radiation when open. DO NOT STARE INTO
This
plug removed from the mains lead of this unit
destroyed. A mains plug with bared wires is hazardous if
must be
inserted in
product
DIRECTIVE
as a
bookcase
or
in
requirements
89/336/EEC,
accordance with the
-
BLUE:
appliances
dedicated
That
is,
a
appliance
Check the
similar
following
they
of your old
appliance
comply
symbol is
product it means the product is
by the European Directive 2002/96/EC.
covered
of EEC
be
placed upon
products should be
separately from the municipal waste
stream via designated collection facilities
appointed by the government or the local
of
authorities.
a
outlet circuit which powers only that
and has no additional outlets or branch circuits.
page of this owner's manual to be
Do not overload wall outlets. Overloaded wall
authorized servicer.
of your old
appliance
will
detailed information about disposal of
appliance, please contact your city office,
waste disposal service or the shop where you
purchased the product.
more
your old
VIDEO Plus+ and PlusCode
Gemstar
are registered trademarks
Development Corporation. The VIDEO Plus+
system is manufactured under license from Gemstar
Development Corporation.
2
help
environment and human health.
4. For
outlets, loose
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
disposal
prevent potential negative consequences for the
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
an
a
2. All electrical and electronic
93/68/EEC and
3. The correct
replacement part by
codes:
coloured red.
attached to
with the
single
exact
or
Disposal
or
an
coloured
-
certain.
with
or
a
circuit;
specification
symbol
the mains lead of this unit may not correspond with the coloured
marking identifying the terminals in your plug, proceed as follows:
the Power Cord
recommend
with the earth
NEUTRAL, BROWN: LIVE As the colours of the wires in
disposed
concerning
or
green and yellow. If any other plug is fitted,
use a 5 amp fuse, either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in
or
73/23/EEC.
Most
mains socket. Do not connect either wire to the earth
1. When this crossed-out wheeled bin
is manufactured to
radio interference
CAUTION
a
marked with the letter E
with the letter L
confined space such
unit.
fuse
coloured brown must be connected to the terminal which is marked
BEAM.
equipment
replacement
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which is
Visible laser
WARNING: Do not install this
a
instructions below:
green
not
omitted. To obtain
contact your dealer. If the
WARNING: A mains
pin,
center.
To
cover
type of plug supplied is not
suitable for the mains sockets in your home, then the plug should
be removed and a suitable type fitted. Please refer to the wiring
cover
of
Contents
Playback.............................28-38
.28-31
GenaralPlaybackFeatures
PlayingaDivXMovieFile.................32
.33
PlayinganAudioCDorMP3/WMAfile
Program Playback with Audio CD and
.
Introduction.............................4-9
SymbolUsedinthisManual................4
NotesonDiscs..........................4
.5
RecordableandPlayableDiscs
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Abouttheinternalharddiskdrive
Playing media files using the USB host feature
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MP3/WMAfile..........................34
.
PlayableDiscs..........................6
RegionalCode..........................6
.6
Availability of copying or moving feature
.
.
.
.
.
.
.
.7
.7
FrontPanel.............................8
RemoteControlOperation.................8
RemoteControl.........................9
HookupandSettings...................10-27
RearPanel............................10
ConnectingtotheAerial..................10
ConnectionstoYourTV..................11
HDMIConnection.......................12
Accessory Audio/Video (A/V) Connections .13-14
.
RadioAntennaConnections...............14
.15
Assembling and Connecting to the Speakers
ViewingaJPEGFile..................35-36
.37-38
Editing a MP3/WMA, JPEG, DivX file
.
.
.
.
.
Recording............................39-46
AboutDVDrecording....................39
AboutHDDrecording....................39
Timeshift..............................40
BasicRecordingfromaTV................41
InstantTimerRecording..................41
TimerRecording........................42
Timer Recording with VIDEO Plus+ System
.43
.44
Checking Timer Recording Details
.44
RecordingfromanExternalInput
RecordingfromDVInput.................45
Simultaneous recording and playback
.46
MPEG4Recording......................46
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.15
Tomountthespeakeronthewall.
.16
SpeakerSystemConnections.
SpeakerPositioning.....................17
DelayTimeSetting....................18-19
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SoundLevel...........................19
TestTone.............................19
XTS/XTSpro..........................19
UsingtheHomeMenu...................20
InitialSettings..........................20
GeneralSettings.....................20-23
AutoProgramming...................20
ProgramEdit........................21
AV1Decoder........................21
AutoClockSet......................22
ManualClockSet....................22
TVAspect..........................22
DisplayMode.......................22
AV2Connection.....................22
PowerSaveMode....................22
Initialization.........................23
LanguageSettings......................23
AudioSettings.........................23
DolbyDigital........................23
.23
DRC(DynamicRangeControl).
.24
Lock(ParentalControl)Settings
.24
Rating/SetPassword/AreaCode
DivXRegistrationCode...............24
RecordingSettings......................25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RecordModeSet....................25
RecordAspect.......................25
DVRecordingAudio..................25
TVRecordingAudio..................25
AutoChapter........................25
MPEG4............................25
AV2Recording......................25
DiscSettings........................25-26
DiscFormat........................25
Finalize/DiscLabel..................26
DiscProtect/PBC...................26
General Explanation of On-Screen Display
.27
.
.
.
Editing...............................47-54
Title List and Chapter List Menu Overview
.47
.48
HDD, VR Mode: Original and Playlist Editing
AddingChapterMarkers.................48
ChangingTitleThumbnails................48
MakingaNewPlaylist....................49
Adding Additional Title/Chapters to the Playlist .49
.50
Deleting an Original or Playlist Title/Chapter
DeletingaPart.........................50
NamingaTitle.........................51
.
.
.
.
.
.
.
TimeSearch...........................51
Sort.................................52
.52
Undoing/Redoing the Last Deletion
.
.
.
.
.
.
.
.
.
.52
DivideOneTitlesIntoTwo................53
.53
CombiningTwoChaptersIntoOne
CombiningTwoTitlesIntoOne
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingaPlaylistChapter.................54
HideaChapter/Title.....................54
ProtectaTitle..........................54
Dubbing..............................55-57
BeforeDubbing.........................55
DubbingfromHDDtoDVD...............56
DubbingfromDVDtoHDD................56
.57
OneTouchCopy(HDDtoDVD).
.57
OneTouchCopy(DVDtoHDD).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference............................58-65
AdditionalInformation....................58
OverwritingRecording.................58
Viewing Title List menu displayed on other
DVDRecordersorPlayers.............58
Playing Your Recordings on Other DVD
.58
Players(FinalizingaDisc).
LanguageCodes.......................59
.
.
.
.
.
.
.
.
.
.
.
.
AreaCodes...........................59
.60
PresettingtheRadioStations.
.
.
.
.
.
.
.
.
.
.
.
.
ListeningtotheRadio...................60
RDSOperation........................61
ProgrammeSearch(PTY)................61
Troubleshooting......................62-63
Specifications.......................64-65
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
About the
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
media.
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
Used in this Manual
Symbol
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
electric shock.
Notes
on
Discs
Handling
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
The exclamation
point alerts you to the
of
presence
important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
symbol.
are
HDD
Storing Discs
playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
After
DVD ALL
following symbols
represented by the
the center out.
the HDD
All DVD discs listed below.
DVD-RW with VR
-RWVR
-RW Video
recording
DVD-RW with Video
mode
recording
mode
DVD+RW disc
-R
DVD-R disc
+R
DVD+R
DVD
on
of the
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
DVD-RAM disc
RAM
+RW
one
to the disc
Titles recorded
the task easier.
making
(DL)
disc
DVD-Video disc
VCD
Video CDs
ACD
Audio CDs
DivX
DivX files
MP3
MP3 files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
Never
JPEG
moving
operate this product immediately after
it from
a
Leave it for two
If you
use
damage
4
records.
Moisture Condensation
WMA WMA files
JPEG files
vinyl
this
cold location to
or
a warm
three hours without
product
in such
discs and internal
a
parts.
location.
operating
situation, it may
it.
Recordable and
DVD-RW
Video Disc
(Digital
DVD-RW discs
These Discs
on
the
Discs
Playable
ReWritable):
-
be formatted for VR mode
can
be recorded
can
recording
repeatedly. Recordings
on
or
Video mode
be
can
recording.
erased, then you
can
record
again
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc
(Digital
These Discs
DVD-R discs
-
Recordable)
only once. After
be recorded
can
be
can
you finalize
formatted to Video mode.
only
a
DVD-R, you
cannot record
on
it
or
edit it.
Playable on regular DVD players (after finalization)
editing features
Limited
DVD-RAM (DVD
Random Access Memory)
DVD-RAM discs can be formatted for VR mode recording.
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record
the same Disc.
Playable on DVD-RAM compatible players.
Recordings can be extensively edited.
Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
You cannot use the cartridge-type DVD-RAM disc in this unit.
-
DVD+RW
on
the
Video Disc
(Digital
These Discs
same
Playable
DVD+R
be
can
erased, then you
can
record
again
DVD+RW
on
can
(Digital
These Discs
it any
ReWritable)
repeatedly. Recordings
on
on
Disc.
compatible players (automatically finalization)
playable on DVD+RW compatible players only
edited the title/chapter
The edited contents
Recordings
+
be recorded
can
again
be
are
Video Disc
+
Recordable)
only once. After
be recorded
can
you finalize
a
after finalization
DVD+R, you
cannot record
on
it
or
edit
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
DVD+R DL
(Digital
These Discs
Video Disc
+
Recordable; Double Layer)
it
or
nearly doubled with double layer DVD+R media, allowing consumers to record
on a single DVD+R disc.
Playable on DVD+R DL compatible players (after finalization)
Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter
combine, added chapter mark, etc.)
Limited title/chapter editing features.
up
edit it any
Storage
be recorded
can
only
once.
After you finalize
a
DVD+R
DL, you
cannot record
on
more.
space is
to 8.5GB of video
Recommended recordable DVD discs
DVD-R
Mitsubishi
(8x, 16x)
That's (8x, 16x)
Verbatim (8x)
DVD+R
DVD-RW
Mitsubishi
Mitsubishi
(8x, 16x)
Ricoh (8x, 16x)
Verbatim (8x)
DVD+RW
(4x)
Verbatim (4x)
JVC (4x)
Victor (4x)
Maxell (4x)
--
--
Mitsubishi
(4x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
DVD+R(DL)
(2.4x, 8x)
Maxell (2.4x)
Mitsubishi
-
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
Maxell (5x)
-
-
-
-
Note:
If
a
DVD-RW/DVD+RW discs is recorded
using
this recorder. So if you want to
use
using
a
the disc
personal computer
on
this
or
recorder, you
other HDD/DVD Recorder
Receiver, you
must format the disc
the
using
original
cannot format the disc
recorder.
5
Playable
Discs
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
be
/ 12
can
cm
purchased
or
rented
disc)
CD-Rs/CD-RWs in VIDEO
CD/Super
VIDEO CD format
AudioCD(8cm/12cmdisc)
Music CDs
or
CD-R/CD-RW
CD-Rs/CD-RWs in music CD format that
(8
cm
/ 12
cm
can
be
purchased
disc)
CD-R/CD-RW discs that contain audio
titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
--
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
(or DVD±R/RW)
played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with
the software publisher for more detailed information.)
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Depending
on
the conditions of the
CD-R/RW
--
--
--
--
--
--
--
discs cannot be
Regional Code
This unit has
the
rear
Notes
a
regional
of the unit
on
or
Regional
code
printed
on
the
rear
of the unit. This unit
a
globe
with
one or more
numbers in it
clearly
match your unit's regional code or the disc cannot play.
If you try to play a DVD with a different regional code from the
back" appears
on
the TV
DVD discs labeled
same as
visible
on
the
cover.
This number must
unit, the message "Incorrect region code. Can't
screen.
Availability of copying
or
moving feature
From
To
MP3/WMA
JPEG
DivX
Audio CD
Video CD
Title* 1
HDD
DISC
No
No
No
No
No
Yes
HDD
USB device
No
Yes
No
No
No
No
DISC
HDD
Yes
Yes
Yes
No
No
Yes
DISC
USB device
No
Yes
No
No
No
No
USB device
DISC
No
No
No
No
No
No
USB device
HDD
Yes
Yes
Yes
No
No
No
*1 The title is recorded from this unit.
6
play only
Codes
Most DVD discs have
play
can
"ALL".
media files
About the internal hard disk
Playing
drive
USB host feature
The internal hard disk drive
Please
equipment.
guidelines below
to
(HDD)
is
fragile piece
following the
protect against possible HDD
use
a
of
the recorder
You
can
(JPEG),
in
an
the media files such
enjoy
movies
MP3
storage device
We recommend that you back up your important
recordings onto DVD discs in order to protect against
1.
move
Install and
the recorder while it is
use
the recorder
on a
on.
Do not
rear
2.
Press HOME
3.
Select
stable, level
vent/cooling
fan.
excessively hot or humid
places, or in places that may be subject to sudden
changes in temperature. Sudden changes in
use
the recorder in
temperature
can cause
the recorder. This
can
a cause
of HDD failure.
Do not
move
the recorder
1.
2.
switching it off. If you need to move
please follow the steps below:
the
from the wall socket.
Unplug
3. Move the recorder.
If there's
there is
a
power failure while the recorder is on
chance that some data on the HDD will
a
be lost.
The HDD is very delicate. If used improperly or in
an unsuitable environment, it is possible that the
HDD will fail after
a few years of use. Signs of
playback unexpectedly freezing
and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
problems
include
of HDD failure.
page 20.
Devices
require additional program
installation when you have connected it to
MP3
?
are
not
Flash
Player:
is not
a
supported.
type MP3 player.
The MP3
installation of
player requiring
supported.
USB Flash Drive: Devices that
a
driver
support USB2.0
or
USB1.1.
Notes:
Do not extract the USB device in
fails, no playback of recorded material
possible. In this case it will be necessary to
replace the HDD unit.
operating (play,
copy, move, etc.).
A back up demands to prevent a data damage.
This unit cannot play back the DivX file in the USB
device.
unit
(This
USB device to
a
can
copy
or move
DivX file from
This unit
a
HDD.)
If you use a USB extension cable or USB
USB device might not be recognized.
hub, the
only support USB 1.1.
using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
can
A device
The USB function of this unit does not
support all
USB devices.
Digital
camera
This unit is not
If the HDD
[MOVIE] option.
recorder,
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
2.
or
on
Devices which
computer,
3.
after
immediately
port of the
the remote control.
[MUSIC], [PHOTO]
options are
Compatible
While the recorder is switched on, do not unplug
from the wall socket or switch the electricity off from
the breaker switch.
on
Details for the
condensation to form inside
be
port of this unit.
Connect the USB device to the USB
surface.
Do not block the
to the USB
unit.
accidental loss.
Do not
pictures
(MP3/WMA) saved
memory by connecting the
as
and tunes
(DivX)
player or USB
failure.
the
using
files is 1000
and mobile
supported
phone
are
not
supported.
when the total number of
or more.
will be
7
Front Panel
a
b
c d efgh
i
a
Starts
or
OFF.
Pause
b Display
press
window
g
Shows the current status of the recorder.
REC: The recorder is
DVD bBHDD
MUTE: The
:
The recorder is
speaker
Indicates
:
h
,
i
j
DOLBY PRO LOGIC II.
recording
or a
timer
recording
is
Indicates
OPEN/CLOSE
Opens
d
or
m
tray.
x (STOP)
Stops playback
USB
port of multimedia (USB
Tray
a
disc here.
Remote Sensor
Connect the DV
output of
AV IN 4
IN/AUDIO IN
(VIDEO
a
digital
camcorder.
(Left/Right))
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
n
HDD/DVD
VOLUME CONTROL
Turn the knob clockwise to increase sound
Set the recorder's mode to HDD
e
a
etc.)
Connect the audio/video
(Z)
closes the disc
options (up/down).
lDVIN
etc.
c
to set the
Point the recorder remote control here.
programmed.
clock, total playing
time, elapsed time, title number, radio frequency,
volume, Surround, chapter/track number, channel,
:
Disc
Insert
k
Indicates when the recorder is in timer
repeatedly
USB host
memory
Indicates sound mode is DOLBY PRO
or
menu
Connect to
format of the current
disc.
LOGIC
Press
ADJUST
Selects
dubbing.
sound is muted.
encoding
z (REC)
recording.
recording time.
DVD: The recorder is DVD mode.
PLII :
n
playback.
playback or recording temporarily,
again to exit pause mode.
Starts
recording.
HDD: The recorder is HDD mode.
D
m
fB/X(PLAY/PAUSE)
POWER
Switches the HDD/DVD Recorder Receiver ON
:
kl
j
or
or
DVD.
level,
counterclockwise to decrease sound level.
recording.
Remote Control
Remote Control
Operation
Point the Remote Control at the remote
sensor
Battery
Installation
Remove the
and
rear
press the buttons.
battery
of the Remote
insert two R03
batteries with
cover on
the
Control, and
(size AAA)
and
matched
correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Remote Control
POWER
OPEN/CLOSE
Turns HDD/DVD Recorder Receiver ON
Opens
and OFF.
FM/AM Tuner select
Select FM
or
AM band
choice.
(FM
listening
AM bands).
and
PIP
HOME
Accesses
or removes
the HOME
Selects PIP function
menu.
in
options
To
adjust
speakers
a menu.
TITLE
Selects
Enlarges
menu.
To
Go to next
beginning
chapter
or
Selects
Stops playback
or
(X)
-
-
recording.
Press
(B)
repeatedly
recording
XP, SP, LP
Turns the sound
Copies
on
and off
DVD to HDD
(or
To
time.
a
chapter
or
adjust speaker
volume.
Selects
a
thumbnail
Activates pause live TV/playback
(timeshift) for a live TV program.
temporarily.
DUBBING
CLEAR
Removes
DVD).
or
all.
REPEAT A-B
sequence between two
points
(A and B)
a
mark
forward
on
during
the Marker Search
menu.
VIDEO Plus+
marker when
playing/
recording.
picture.
TIMESHIFT
RESOLUTION
EP.
REPEAT
Repeats
in
menu.
INSTANT SKIP
title
frequency
(+/-)
Skips 15 seconds
playback.
Repeat chapter, track,
selections.
(O)
menu.
HDD to
Radio.
THUMBNAIL
CHP ADD
Inserts
menu
MUTE
Timer Record
or
radio station's
a
VOLUME
TIMER REC
Displays
options.
to set
mode:
recording
Stores
Removes the
REC MODE
Selects the
Confirms
RETURN
(x)
recording.
the
menu.
the tuner's memory.
z REC
Starts
Setup
MEMORY/ENTER
playback.
STOP
menu
Select programme of TV
recording
temporarily.
PLAY
the
PR/PRESET(+/-)(v/V):
or
Starts
or removes
bBvV(left/right/up/down)
forward.
PAUSE/STEP
playback
delay time of each speaker
Dolby Digital and Dolby Pro Logic II
Accesses
>)
SCAN(-/+) (m/M)
Pause
natural and realistic
mode.
track. Returns to
or
more
SETUP
chapter or track or
previous chapter or track.
Search backward
enjoy
in
of current
go to
MONO.
channel.
program.
/
or
To set the
-
Display.
viewing a TV
SKIP(-/+) (.
language.
To set the sound level of desired
-
Accesses On-Screen
information while
audio
LEVEL/DELAY
disc,
List-Original and
List-Playlist menu.
DISPLAY
Displays
an
sound.
Switches between Title
Title
language.
Selects sound mode.
image.
DVD
menu on a
subtitle
XTS pro
MENU/LIST
Accesses
position.
SOUND
ZOOM
video
a
Selects STEREO
-
SEARCH
Marker Search
from the listener's
Selects
-
point during playback.
Displays
the sound balance of the
AUDIO/MO./ST.
MARKER
Marks any
off.
SUBTITLE
the disc's Title menu, if
available.
Displays
on or
TEST TONE
0-9 numerical buttons
Selects numbered
tray.
Changes the input to use for recording.
(Tuner, AV1, AV2, OPT, AV 3, AV4 or DV).
the
as
and closes the disc
AV
PTY
To
To start
PTY
a
type.
search for
a
specific
display
the program
VIDEO Plus+
menu
for
System programming.
TV/DVD
To view channels selected
recorder tuner
or
by
by
the
the TV tuner.
RDS/RESOLUTION
To view the various
displays
of the RDS
options.
Sets the
output resolution for HDMI.
9
Hookup
and
Settings
Rear Panel
ab
cd e
f
gh
i
ANT.IN
SCART
jk
a
lmn
i
ANT.IN
Connect the aerial to this terminal.
b
c
HDMI
(Type A)
output providing a high quality
digital
audio and video.
AV OUT
(VIDEO
AV IN 3
a
(VIDEO
k
output of
Set
an
external
signal
from the AERIAL to your
l
m
a
S-Video
Input
a
TV with SCART
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
jack.
VIDEO OUT SELECT Switch
Select either COMPONENT
(Left/Right))
TV.
on
EURO AV 1 AUDIO/VIDEO
Connect to
(Left/Right))
video/audio inputs.
IN/AUDIO IN
S-VIDEO OUT
Connect to
Top Box, VCR, etc.).
Connect the audio/video
f
source.
RF. OUT
Passes the
/ AUDIO OUT
TV with
into the power
TV/monitor
(Pay-TV decoder,
Connect to
e
j
interface for
EURO AV 2 DECODER
source
d
Plug
HDMI Connector
Connect the audio/video
AC Power Cord
or
RGB
EURO AV1 AUDIO/VIDEO terminal
signal of
depending
on
how you connect the recorder to the TV.
n
COMPONENT/PROGRESSIVE SCAN VIDEO
SYSTEM
OUT
Connect the SPEAKER SYSTEM at the Active
Connect to
(Y
Pb
Pr)
a
TV with Y Pb Pr
inputs.
Speaker.
g
OPTICAL IN Connector
Connect
h Cooling
optical output
an
of
Digital
Device.
fan
Connecting
Rear of TV
to the Aerial
Aerial
SCART INPUT
Remove the aerial cable
ANTENNA
INPUT
from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
input
on
Plug
one
plug
L
on
VIDEO
INPUT
R
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
AUDIO INPUT
R
your TV set.
ANT.IN
RF coaxial connection
Connect the RF. OUT
jack on the DVD Recorder
input jack on the TV using the
ohm Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
Receiver to the aerial
75-
SCART
Rear of the HDD/DVD Recorder Receiver
10
Video connection
Connections to Your TV
Connect the VIDEO OUT
Make
the
on
When
of the
following connections, depending
capabilities of your existing equipment.
one
using
the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
jacks,
SCART
jack,
using
the
set the VIDEO OUTPUT SELECT
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the recorder. Use only one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
Caution
the recorder is connected
directly to the
input channel.
not connect the recorder's AUDIO OUT jack to
phono in jack (record deck) of your audio
TV. Tune the TV to the correct video
Do
system.
Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
protection system.
Connection
right
AUDIO OUT
the audio cables
using
(A). Do
jack to
of your audio
Component
right
IN
jacks of the
jacks on the TV
not connect the
the
in
phono
jack
system.
Video connection
Connect the COMPONENT / PROGRESSIVE SCAN
VIDEO OUT
jacks on the recorder to the
corresponding input jacks on the TV using
cable (C).
a
high-definition
or
an
Y Pb Pr
"digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video
resolution possible. If your TV does not accept the
Progressive Scan format, the picture will appear
scrambled if you try Progressive Scan on the recorder.
Set the resolution to
for
576p using
progressive signal.
RESOLUTION button
Note:
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
analog
or
video
S-VIDEO
connection.
Rear of TV
S-VIDEO
INPUT
jack on the recorder to the
using the video cable (V).
recorder to the audio left and
If your television is
make the best connections.
the
(Left/Right)
(record deck)
Tips
sure
the TV
on
recorder's AUDIO OUT
switch to SCART.
Make
Audio
jack
Connect the left and
set the VIDEO OUT
SELECT switch to COMPONENT. When
video in
SCART INPUT
VIDEO
INPUT
COMPONENT VIDEO INPUT
Y
AUDIO INPUT
SCART connection
Pr
Pb
Connect the EURO AV1 AUDIO/VIDEO scart
jack
the recorder to the
the TV
the scart
using
S
T
C
V
A
corresponding
cable (T).
Optical Digital
Connect
in
jacks
on
on
Connection
of DVD Player (or Digital
etc) to the OPTICAL IN connector on the
recorder using the optical cable (O).
an
optical output
Device
ANT.IN
Note:
When the
SCART
from
Rear of the HDD/DVD
Optical jack is connected, audio will output
speakers of the main unit amplifier only but the
audio
Recorder Receiver
output is
not available via the HDMI and AV
jacks.
o
Caution
If the resolution is set to
720p or 1080i, the VIDEO
OUT, S-VIDEO OUT and COMPONENT VIDEO OUT
OPTICAL
OUT
DVD
Player (or Digital
Device, etc)
connections
are
not available.
S-Video connection
Connect the S-VIDEO OUT
the recorder to the
S-Video in
S-Video cable
jack
on
the TV
jack on
using the
(S).
11
HDMI connection
HDMI
compatible
TV
HDMI
If you have
a
HDMI TV
to this recorder
using
a
1. Connect the HDMI
HDMI
jack
monitor, you
HDMI cable.
or
can
connect it
jack on the recorder to the
compatible TV or monitor
HDMI
on a
H
(H).
2. Set the TV's
source
to HDMI
to TV's Owner's
(refer
manual).
Notes:
The
the cable connector
arrow on
up for correct
recorder.
alignment
body
should face
with the connector
on
the
SCART
Rear of the HDD/DVD Recorder Receiver
About HDMI
HDMI
(High
Definition Multimedia
Interface) supports
single digital connection for
Players, Set-Top Boxes, and other AV
both video and audio
(Type A)
If there is noise
or
lines
on
use
the screen,
please
check
with DVD
devices.
HDMI
the HDMI cable.
on a
developed to provide the technologies of
(High Definition Contents Protection). HDCP is
to protect digital content transmitted and
was
HDCP
used
Audio Channel Selection
received.
The
Dolby Digital and DTS sound are not available
through the HDMI connection. Set the Dolby Digital to
PCM mode in the setup menu (refer to Audio Settings
on page 23).
Tip
:
When you
resolution
use
HDMI
connection, you
can
(576i, 576p, 720p, or 1080i)
output using RESOLUTION button.
change
the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it
capability to support standard, enhanced,
high-definition video plus standard to multi-channel
surround-sound
on
again.
audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV
source
and AV devices such
as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface
Caution
Changing
the
for the HDMI
HDMI has the
or
HDMI
are
trademarks
licensing
or
registered
trademarks of
LLC.
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the followings:
-T ry
switching
recorder.
off the HDMI/DVI device and this
Next, switch
the HDMI/DVI device
on
and leave it for around 30
on
-
seconds, then switch
this recorder.
The connected device's video
correctly
input
is set
for this unit.
compatible with
720(1440)x576i, 720x576p, 1280x720p, or
1920x1080i video input.
Not all HDCP-compatible DVI devices will work
-
The connected device is
this recorder.
-
The
picture
will not be
non-HDCP device.
12
displayed properly
with
with
Accessory Audio/Video (A/V)
TV
VCR, Cable Box, or
Satellite Tuner, etc.
Connections
Connecting
You
can
watch
PAY-TV/Canal Plus Decoder
a
or
record PAY-TV/Canal Plus
programmes if you connect a decoder (not supplied)
to the recorder. Disconnect the recorder's mains lead
from the mains when
To watch
or
connecting
the decoder.
record PAY-TV/Canal Plus programmes,
set
[AV2 Connection] option to [Decoder] (see page
22) and set the program's [Decoder On/Off] option to
[On] on the Setup menu (page 21).
ANT.IN
Tip:
You do not need to turn
signals
on
the recorder to view the
from the connected tuner
on
your TV.
Note:
SCART
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
decoder.
Rear of the HDD/DVD Recorder Receiver
Tip:
You do not need to turn
signals
TV
on
the recorder to view the
from the connected tuner
on
your TV.
Notes:
PAY-TV/Canal Plus
Decorder
Pictures
prohibit
containing copy protection signals
copying cannot be recorded.
that
any
If you pass the recorder signals via the VCR, you
may not receive a clear image on your TV screen.
Be sure to connect your VCR to the recorder and
SCART AV
your TV in the order shown below. To watch video
tapes, watch the tapes through a second line input
on
your TV.
Line
VCR
RECORDER
input
1
TV
Line
ANT.IN
input
2
When you record to a VCR from this recorder, do
not switch the input source to TV by pressing the
TV/DVD button
on
the remote.
SCART
Rear of the HDD/DVD Recorder Receiver
If you are using a B Sky B tuner, be sure to connect
the tuner's VCR SCART jack to the EURO AV2
DECODER
Connecting
jack
Connect
a
VCR
to the EURO AV2 DECODER
or
similar
EURO AV2 DECODER
To watch
or
record the
recording device to
jack of this recorder.
source
jack.
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
VCR
or
tuner.
the
from EURO AV2
DECODER
jack, set [AV2 Connection] option to
[Others] (see page 22) and set [AV2 Recording] option
to [Auto], [CVBS] or [RGB] as required (see page 25).
13
ConnectingtotheAVIN3orAVIN4
Connecting
Jacks
Connect the
input jacks (AV
IN 3, AV IN
4)
Using
the
on
using
accessory component,
jacks on your
audio/video cables.
DV
a
tapes
Use
Digital Camcorder
the front
connect
recorder to the audio/video out
a
DV
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
to DVD.
DV cable (not supplied) to connect the DV
jack of your DV camcorder to the front panel
jack of this recorder.
a
in/out
IN
DV
Note:
AUDIO
OUTPUT
This
only.
R
jack
is for connection to DV
It is not
compatible
with
digital camcorder
digital satellite tuners
D-VHS video decks.
L
DV
VIDEO
OUTPUT
Rear of the HDD/DVD
Digital
Camcorder
DV
IN/OUT
Front of the HDD/DVD
Recorder Receiver
Recorder Receiver
Front of the HDD/DVD Recorder Receiver
Radio Antenna Connections
Connect the
supplied
FM/AM antennas for
listening
to
the radio.
Connect the AM
loop
antenna to the AM antenna
connector.
Connect the FM wire antenna to the FM antenna
connector.
Notes:
To
prevent noise pickup, keep the AM loop
antenna
away from the HDD/DVD Recorder Receiver
and other components.
Be
sure
After
to
fully
System
extend the FM wire antenna.
connecting
the FM wire antenna,
close to horizontal
as
keep
it
as
possible.
AM
GND
ANTENNA
FM
14
or
Assembling and Connecting
the Speakers
The
to
speakers are detached from the speaker stands.
speaker cables and assemble the front
rear speakers from speaker stands as illustrated.
To mount the
on
the
wall
1.
For Front
or
Rear
Speaker
Connect the
1-1.
and
1-2. Remove the 2
How to connect the
speaker
the holder
Open
:
of the
cover
screws
in the
speaker.
speaker hole.
1-3. Remove the
Speakers
For Center
speaker from the stand.
Speaker : Remove the 4 screws
from
stand.
2.
For Front
or
Rear
Speakers
:Disconnect the
cable from the terminal
speaker
on
Hokupand Setings
the bottom of
the round board.
3.
For Front
or
cable to the
the
4.
speaker.
For Front
cover
5.
Connect the
terminal
on
speaker
2.
Set the
speaker
3.
Fix the
speaker
screws
(A)
4.
cables to the
appropriate
the bottom of the round board.
on
7.
8.
in the
speaker
cover
(F)
by inserting
the 2
or
Speaker
speaker.
Rear
Speaker
with the 2
Rear
:
Close the bottom
:
Fix the bottom
screws
Speakers
:
cover
(B).
Close the small
(E).
Fix the bracket
screws
(B).
Drive 2
screws
hook the
hole.
of the
or
speaker
the stand.
and the stand
Close the holder
(C)
Rear
of the
For Front
cover
1.
or
For Front
of the
6.
Rear Speaker : Connect the speaker
appropriate terminal on the bottom of
(D)
on
the
speaker using
in the wall for
speaker
over
speaker
the 2
and then
them.
speaker.
D
B
AF
C
E
B
15
Speaker System Connections
Connect the SYSTEM to the SYSTEM CONNECTOR
System
rear
of the Active Subwoofer
Speaker, using
the
supplied
cable.
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround
cables.
sound, adjust the speaker parameters (volume, distance, etc.).
AM
GND
ANTENNA
Notes:
Be
sure
to match the
If the cables
are
speaker
reversed,
cable to the
appropriate
If you use front speakers with low maximum
the speakers.
on
16
terminal
on
the
components:
+
to
+
and
--
to
--.
the sound will be distorted and will lack base.
input rating, adjust
the volume
carefully
to avoid excessive
output
Speaker Positioning
In the
of normal
case
position
the 6
use
front
speakers (2
1 center
speakers,
speaker,
2
rear
speakers
and
subwoofer).
If you want to
subwoofer.
play
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
a
?
?
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Center
speaker
speaker
The center
and front
speakers
the
speakers
the
ideally
are
for
equal
same
distance. And
height.
But
set up the
by hearing position
normally place
it above
or
Hokupand Setings
below the
television.
?
Rear
speakers
Place left and right
behind the
for surround sound
playback.
position and install them
speakers towards a wall
In the
?
of
case
other, and
a
smaller
set the
rear
listening
For best
These
speakers
or
ceiling
to further
disperse
size, if the audience is
speakers
above 60
-
90
recreate sound motion and
not install the
above the level of the listener's
at
or
room
area.
results, do
cm
speakers
rear
ears.
atmosphere required
listening
too far behind the
It is also effective to direct the
rear
the sound.
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Front
Speaker
(Left)
Center
Speaker
Front Speaker
(Right)
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
17
Time
Delay
In
Dolby Digital
or
Setting
Dolby
Pro
mode it is
Logic
Center
assumed that the distance from the listener to each of
the
is
speakers
equal.
times of the center
If not then
setting the delay
speakers the sound will
or rear
be
heard
simultaneously by the listener.
speakers to the listener. If the
distance from the listener to each speaker is the
same, in the Dolby Digital and Dolby Pro Logic mode
the delay time of each speaker is as follows
The interval from the
In
mode
Dolby Digital
delay time : 0 5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot be set
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be
automatically set.
The delay time is 1 msec per 30 cm.
If the Center and rear speakers are further than the
front speakers from the listener, the delay time will be
Center
~
time
delay
setting
(Dolby Digital
mode
only)
If the distance of DF is
equal to the distance of DC in
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the table
the left
below.
Ex)
If the distance from the front
speakers to the
speaker to the
listener is 3m and from the center
listener is 2.4m, the center delay time is 2msec.
(DF) 2.4m (DC) = 60cm (A)
3m
-
60cm
(A)
/ 30cm
2msec
=
~
at minimum.
(A)
L
R
C
DC
Setting the delay time in the Dolby Digital
and Dolby Pro Logic (II) mode
1.
Press LEVEL/DELAY twice.
The current surround
delay
time appears in the
Display
Window.
2.
Press
3.
If
/
setting
to
is
change
complete,
the
time.
delay
press LEVEL/DELAY.
Note:
You
can adjust the center delay time only in the
Dolby Digital mode and its delay time appears.
DF
SW
Setting
DS
SL
SR
(B)
the Sound Effects in the Music
mode of
1.
Pro
Dolby
Press SOUND
Logic (II)
repeatedly
to select the Music
mode.
Each time you press these buttons, the sound
changed in the following order;
mode is
Surround
delay
time
If the distance of DS is
setting
longer than the DF
in the left figure, set the Surround Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener
is 3 m and from rear speakers from the listener is 1.5
m, in the Dolby Digital mode the rear delay time is 5
equal
to
PRO LOGIC
→
PLII MOVIE
→
PLII MUSIC
PLII MATRIX→ HALL 1→ HALL 2
or
BYPASS
2.
→
→
THEATER
→
...
Press LEVEL/DELAY twice.
The current surround
delay
time appears in the
Display
Window.
msec.
3m
(DF)
1.5m (B)
In
-
1.5m
=
(DS)
=
1.5m
150cm / 30cm
=
(B)
3.
Matrix: 0
to select
a
desired Sound mode.
5msec
PANO
y
C WIDT
y
/
button, it is changed
DIMEN...
~
Movie: 10
Music: 0
/
Each time you press the
in the following order;
Dolby Pro Logic II (Surround delay time):
Logic: 15 30msec
Pro
Press
25msec
~
~
15msec
~
4.
Press
15msec
/
to
change
the
steps.
CWIDT:0~+7
DIMEN: -3
+3
~
PANO: ON/OFF
5.
18
If
setting
is
complete,
press LEVEL/DELAY.
PANO
(PANORAMA)
Test Tone
This control extends the front stereo
image to include
the surround speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
elements in the
mix,
accentuated
the Panorama process.
C WIDT
by
these
as
are
This function allows you to can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode
1.
detected and
A hiss noise
speakers
user
to
forward, and steps --1, --2, and
or
the
rear.
This
--3
move
the sound
You
can adjust the sound level while the test tone is
operating. First press LEVEL/DELAY then press the
2.
/
buttons,
speakers
?
If
3.
setting
is
so
same
During the
be paused
test
that the sound level from all the
from the listener's
position.
tone, if you adjust the sound level, it will
in the current
complete,
speaker
channel.
press TEST TONE.
XTS/XTS pro
Each time you press XTS pro the
following order.
Press LEVEL/DELAY
on
the remote control.
The level indicator will appear in the
/
to select
a
desired
Each time you press the
in the
/
Display
XTS-PRO ON
FL
speaker
to set.
button, it is changed
C (Center)
FR (Front Right)
(Front Left)
SL (Surround Left)
(Surround Right)
SW (Subwoofer)
FL (Front Left)
→
→
→
/
channel.
...
adjust the
(-6dB +6dB)
sound level of the selected
2-3 and
the sound level of the
to
~
Repeat step
adjust
other channels.
setting
→
→
→
Press
is
→
XTS ON
→
NORMAL
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
living sound source.
unique
complete,
press LEVEL/DELAY.
the
XTSON
Window.
following order;
SR
in
creates the
set the sound level of the desired channel.
Press
setting changes
the
The
If
is
XTS-PRO ON
Sound Level
5.
...
can
towards the surrounds.
4.
→
→
the
gradually adjust
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound
3.
→
→
→
be useful to
2.
following order;
C
→
SR
sound field either towards the front
1.
TEST TONE.
(DIMENSION)
This control allows the
can
by pressing
out for 2 seconds from each
FR (Front Right)
(Front Left)
(Center)
SL (Surround Left)
(Surround Right)
SW (Subwoofer)
FL (Front Left)
(Center Width)
positioned between the center speaker and the left/right
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage
presentation, and is recommended for most recordings.
Step "0" places all center sound in the center speaker.
Step "7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
You
in the
FL
This control allows center-channel sounds to be
DIMEN
comes
When
playing the movie with the weak bass sound
relatively to the general music, it enforces the sense
of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
Note:
The XTS mode is
temporarily disabled when
changing from 2.1 CH to 5.1 CH and it is enabled
when changing it to 2.1 CH.
NORMAL
XTS-Pro and XTS mode tune off
19
Using
From the Home Menu
Media for
General
the Home Menu
playback
screen
and
you
recording
can access
1.
Press HOME to
2.
Use the b / B buttons to select
want. Sub
display
options
all the
of the recorder.
the Home Menu
a
main
screen.
option
sub
option
1.
Press SETUP and the
2.
Use v / V to select the desired
3.
While the desired item is
move
Setup
menu
appears.
option.
selected, press B
to
to the second level.
you
appears.
Use the v / V and ENTER buttons to select the
3.
Operation
4.
Use v / V to select the second desired
5.
Press B to
6.
Use v / V to select the desired
you want.
move
option.
to the third level.
setting
then press
ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the
7.
Setup
menu.
Note:
Press b
To exit the HOME menu, press HOME.
4.
to go back to the
General
TV
TV HDD: Returns to live TV
viewing
for HDD
viewing
for DVD
Auto
recording.
TV DVD: Returns to live TV
Programming
synthesized
MOVIE
level.
Settings
This recorder is
recording.
previous
equipped with a frequency
capable of receiving up to
tuner
88 TV
channels.
HDD:
HDD.
(page 47)
HDD Divx:
Displays the Title List menu for
Displays the [Movie List]
(page 32)
menu
for HDD.
Preparation:
Connect the recorder to the desired
shown in
as
DISC:
Connecting
type of aerial,
to the Aerial
on
page 10.
Displays Title List menu for recordable disc (page 47)
Displays [Movie List] menu for DivX disc.
(page 32)
Plays back Video CD or DVD-Video disc
(page 28-31).
USB Divx: Displays the [Movie List] for USB device
(page 32)
-
-
-
PHOTO
(See page 35)
Displays [Photo List] menu for HDD.
DISC: Displays [Photo List] menu for disc.
USB: Displays the [Photo List] for USB device.
HDD:
1.
Select the
2.
Press B to
[Start]
MUSIC
(See page 33)
Displays [Music List] menu for HDD.
DISC: Displays [Music List] (or Audio CD) menu
3.
HDD:
SETUP
Start:
Displays
(See page 20)
Displays Setup
Initial
In this
[Music List]
menu
After you have connected your recorder for the very
first time. If you press SETUP for initial setting, you
can only set the [Auto Programming] option. Then you
are
several ways to
settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
20
in
Note:
menu.
system, there
begin the channel search.
automatically cycle through all
channels in the area and place them
the tuner's memory.
for USB device.
Settings
customize the
to the third level.
highlighted.
Press ENTER to
available
the
move
icon is
The tuner will
for
disc.
USB:
[Auto Programming] option.
can
set the other
options.
Program
You
1.
2.
edit
can
move,
Edit
Program
channel
a
manually (add, delete,
name,
[Program Edit] option
Press ENTER while
The
Program
List
then press B.
is selected.
[Edit]
menu
perform a search to select and store TV
manually.
When you select [Program Edit] in step 4 above,
display for setting channels appears.
can
channels
etc.).
Select
You
Edit
the
1.Useb/Btoselecttheitemandpressv/Vto
change the setting.
appears.
[PR]
indicates the selected programme
Hokupand Setings
position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
3.
Use v / V to select
PR number then press
a
[Ch.] Changes
ENTER.
4.
Use v / V to select the program
ENTER.
[Program Edit]
"Program Edit"
option
Sets the channel
the
on
To enter
See
manually.
right.
Names
page 51.
be up to 5 characters long.
characters,
can
see
[Move] Sorts the programme positions
Program List. Press v / V to move the
programme position to a new location.
[Delete]
Disables
a
programme
the
selected
you do
Sets the channels for the
decoder. You need this
setting
to watch
Press ENTER
again
Press ENTER
Inputs
inputting
Program
List
menu
appears.
the
[Canal+] appears
display.
again to turn off the setting.
so
the
on
signals from the EURO AV1
jack. Normally select this.
to turn off the
signal input from the
jack is output to the
EURO AV2 DECODER jack for decoding.
The decoded signal is then input back through
the EURO AV2 DECODER jack so you can
EURO AV1 AUDIO/VIDEO
record
[NICAM Auto/off]
for
On: The encoded video
or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
or
view PAY-TV/Canal Plus programmes.
Sets the channels for the
NICAM broadcast.
is not
Press AV while the
AUDIO/VIDEO
[Decoder On/Off]
display.
1.
2.
Off:
jack
signals.
Press ENTER
position
clearer
AV1 Decoder
encoded video
on
a
2. Choose OK then press ENTER to confirm the
setting and returns to the Program List menu.
Sets the EURO AV1 AUDIO/VIDEO
not need.
display.
setting.
[MFT]
picture.
then press
[Station Rename] Changes the station name.
The display for entering characters appears.
the
the channel number.
Fine tunes the channel to obtain
is lit
Normally, [NICAM]
on
If the sound from NICAM broadcast
clear, press ENTER
so
[NICAM]
disappears.
5.
Press RETURN
List
(O) repeatedly
to exit
Program
menu.
21
Auto Clock Set
AV2 Connection
When Channel auto search is
Time and Date
also set
are
the recorder
completed the actual
automatically. If the time
You
in
is not correct, the clock must be
set
display
manually.
1.
Select
2.
Use v / V to select
a
decoder
or
Select
other device to the
on
the back.
if you connect the
recorder's EURO AV2 DECODER jack to a PAY-TV
then press B.
[Decoder]
Canal Plus decoder.
Select [Others] if you connect the
recorder's EURO AV2 DECODER jack to a VCR
[Others]
then press
[Auto] option
connect
[Decoder]
or
[Clock set] option
can
EURO AV2 DECODER socket
ENTER.
similar
recording
or
device.
Note:
There
are cases
where the TV station does not
send,
Power Save Mode
sends wrong date and/or time information and the
recorder sets the incorrect time.
You
If this
mode.
or
happens,
manually.
we
recommend that you set the clock
1.
Select
2.
Use v / V to select
[OFF]
[ON]
[Clock set] option
then press B.
[Manual] option
next column.
the
setting
Press ENTER to confirm your
setting.
(up/down): Changes
current cursor position.
Selects the
aspect ratio of the connected TV (4:3
standard
wide).
Select this when
[16:9]
Select this when
TV with
Display
[4:3]
display
a
is selected in
[Letter Box] Displays
the upper and lower
a
wide picture
[TV Aspect].
wide
portions
picture
of the
[Pan Scan] Automatically displays
the entire
not fit.
to
connecting
a
wide-screen
wide mode function.
Mode
Selects how to
when
a
screen
and cuts off the
a
on
the
screen
with bands
on
screen.
wide
portions
are
signals (CANAL+
or
not decoded in the Power Save
mode for the timer
recording
and when
power off of the unit after receiving the encoded
television signals (CANAL+ or PREMIERE).
connecting to a 4:3 screen
[4:3], set [Display Mode]
TV
or
economic power save
display window
The Power Save Mode is not available in the
standby
at the
Aspect
TV. When you select
below.
22
The encoded television
PREMIERE)
[4:3]
an
in the
Notes:
then press
Mode.
or
displayed
Power Save Mode is active.
Enter the necessary information for date and time.
b / B (left/right): Moves the cursor to the previous
v / V
TV
is
Power Save Mode is not active.
ENTER.
or
4.
set up the unit into
Nothing
when the unit is turned off.
Manual Clock Set
3.
can
picture
on
that do
Initialization
You
can
Audio
Settings
reset the recorder to its
original factory
or USB Memory.
settings and initialize the HDD
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
[HDD format] Initializes
everything recorded on
[USB format]
recorded
on
the HDD
(Hard
Disk
Initializes the USB device.:
the
Drive):
the HDD will be erased.
Memory
everything
1.
Select
2.
Press v / V to select the desired
[Initialization] option
then press B.
then press
option
ENTER.
The confirm message will appear.
3.
Use b / B to select
Hokupand Setings
will be erased.
[Yes]
or
[No]
then press
Dolby Digital
[Bitstream]: Select "Bitstream" when enjoying
original Dolby Digital Audio (Set to this mode
ordinary).
[PCM]: DVDs encoded in Dolby Digital will be
automatically downmixed to two-channel PCM audio
(refer to Audio Channel Selection on page 12).
ENTER.
Language Settings
DRC
(Dynamic Range Control)
With the DVD
format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to
[ON]
for
this effect.
Display
Select
a
Menu
language
for the
Setup
menu
and
on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers
the disc
was
to the
original language
in which
recorded.
language, press number
corresponding
4-digit number according to the language code list
in the reference chapter (see page 59). If you enter
the wrong language code, press CLEAR.
[Others]
To select another
buttons then ENTER to enter the
[OFF](for
Disc
Subtitle)
:
Turn off Subtitle.
23
Lock
(Parental Control) Settings
Set Password
1.
Select
2.
Follow
[Set Password] option
2
then press B.
shown
"Rating".
password, select the [Change],
press ENTER and input the new 4-digit code then
press ENTER. Input it again to verify.
To delete the password, select [Delete] then press
To
step
change
as
the
ENTER.
If you
forget
4-digit
your
If you
forget your password,
password, follow the procedure
Rating
Blocks
1.
playback
of rated DVDs based
content. Not all discs
on
Select
2.
To
[Rating] option
access
the
features, you
[Yes]
password is
then press B.
Rating, Password and Area Code
input the 4-digit security code
must
you created.
If you have not yet entered a
are prompted to do so. Input
security
4-digit
a
Enter the code of
code you
code and
"Area
Select
[Area Code] option
Follow
step
3.
Select the first character
and
the v / V buttons.
[8]: Rating
(1) has the
is
the least
rating eight (8)
one
most restrictions
restrictive.
4.
If you select [No Limit], parental control
is not active and the disc plays in full.
rating
scenes
available
a
on
as
shown
then press B.
"Rating".
the v / V
using
Shift the
cursor
using B buttons and select
using v / V buttons.
the
second character
5.
Press ENTER to confirm your
DivX
rating for the recorder, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
2
area
code selection.
selection.
Note:
If you set
the same
(See
buttons.
[No Limit]:
Press ENTER to confirm your
used
were
to the list
Codes", page 59.).
1.
rating using
6-digit
whose standards
disc, referring
2.
[1]
4.
an area
to rate the DVD video
ENTER, press CLEAR.
a
1 level icon.
Area Code
press ENTER. Enter it again and press ENTER to
If you make a mistake before pressing
-
an
then press ENTER. The 4-digit
cleared. Enter a new code.
verify.
Select
below.
then select
number "210499".
rated.
are
Display Setup
menu
2. Use the Number buttons to enter the
their
3. Select
1.
3.
code
to clear the current
is
DivX
Registration Code
We
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while
the disc.
[DivX Reg. Code] option
registration
3.
Use the
[View]
then press B.
is selected and the
code will appear.
registration
videos from Divx
code to
purchase
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto
a
disc for
playback
on
this unit.
Note:
All the downloaded videos from DivX
be
24
played
back
on
this unit.
VOD
can
only
MPEG4
Recording Settings
When HDD
you can set the video recording
MPEG4. If you want to record a
recording,
format to MPEG2
or
video with MPEG4
format, select [ON]. When this
made, this unit will record the video with
choice is
MPEG4 format
the HDD.
on
[OFF] For MPEG2 recording in HDD mode
[ON] For MPEG4 recording in HDD mode
AV2
You
video
Record Mode Set
You
XP
LP
input signal
Hokupand Setings
type of the signal when recording
from the device connected to the
The video
you can set the
aspect ratio to suit the material you're
will
automatically
follow
signal received.
[CVBS] Only for recording CVBS input signal.
[RGB] Only for recording RGB input signal.
Disc
recording,
input signal
the video
Aspect
When DVD
or
[Auto]
set the
Record
select the
EURO AV2 DECODER socket.
picture quality for recording;
(High Quality), SP (Standard Quality),
(Low Quality), EP (Extend Quality).
can
Recording
can
recording
recording (16:9
Settings
Disc Format
If you load a completely blank
initialize the disc.
4:3).
disc, the recorder will
DVD-R: The recorder initialize the disc to Video
DV
Recording
mode. The
Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN
jack.
digital
Some
mode will
recording
always
be Video
mode.
DVD-RW/DVD+RW/DVD+R(DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
ENTER. DVD-RW disc is initialized to Video mode.
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
shooting.
other is for
the
Also, you
can
reformat the DVD-RW/DVD+RW/
DVD-RAM from the
overdubbing after
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is
Setup
menu as
below.
used.
TV
Recording
When TV
Audio
recording
with
bilingual,
you
can
choose
audio channel to record.
[Main+Sub] Main language
[Main] Main language only
[Sub] Sub language only
and Sub
language
1.
Select
2.
Press ENTER while
Format Disc
3.
Auto
When
For
recording in Video mode, chapter
specified setting. You can change
10 minutes
markers
with the
is selected.
a
desired mode
(VR
Mode
or
or
[None] setting.
Mode)
DVD+RWs, go
to
step
4.
are
this interval to
15 minutes. If you select
switch off automatic chapter marking
[None],
altogether
[Start]
appears.
then press ENTER.
Confirm message will appear.
Chapter
put in
minutes,
5
menu
Use b / B to select
Video
then press B.
[Disc Format] option
4.
Use b / B to select
It takes
a
[OK] then press ENTER.
few moments to initialize the disc.
Caution
If you want to change the disc format,
recorded on the disc will be erased.
everything
25
Finalize
Disc Label
recordings in place so that the
played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
Finalizing
disc
can
'fixes' the
Use this to enter
be
MENU/LIST
The disc
see
Caution
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you
DVD-RW disc
can
record and edit
for the disc. This
name
display
be up to 32 characters long.
on a different recorder, you will
limited character set.
name can
For discs formatted
TITLE.
or
a name
appears when you load the disc and when you
disc information on-screen.
only
a
1.
Select
2.
Press ENTER while
[Disc Label] option
Keyboard
a
To enter
menu
[Edit]
then press B.
is selected.
appears.
characters,
see
page 51.
by choosing [Unfinalize] option.
Disc Protect
When
recording
in DVD-RAM / DVD+RW / +R disc
VR mode formatted DVD-RW
disc,
prevent accidental recording, editing
or
[ON] to
deleting of
or
set to
the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
Select
1.
Press ENTER while
2.
Finalize
Select
menu
PBC stands for
then press B.
[Finalize] option
[Finalize]
menus
is selected.
some
appears.
[OK]
[OFF]
CDs.
long
disc,
how much is recorded
finalization takes
number of titles
on
DVD+R DL disc
can
depends
on
the
on
the
disc,
type of
and the
the disc.
take up to 30 minutes to
finalize.
Tips
If you load
a
finalized, you
DVD-RW that has
can
you
can
edit and re-record onto the disc.
You cannot unfinalize
If
[Disc Protect] option
not available. To
[OFF].
26
already been
by choosing
menu. After doing this,
'Unfinalize' it
Unfinalize from the Finalize
a
DVD-R and DVD+R disc.
is set to
finalize,
set
Video CDs
are
played according
to the
PBC, if
available.
Note:
How
Playback Control and refers to special
navigation features that are available on
Video CDs.
[ON]
then press ENTER.
The recorder starts finalizing the disc.
3.
and
[ON], the finalize is
[Disc Protect] option to
Video CDs
are
played
the
same
way
as
Audio
General
Explanation of
On-Screen Display
This manual
Displaying
You
loaded
operating the
require specific operation or
allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
gives
basic instructions for
recorder. Some DVDs
recorder
or
is not available
Displaying
on
the disc.
Information While
Watching
can
1.
2.
display
Press DISPLAY
once
to show current status.
Press DISPLAY
once
again
to show various
information.
The items
During viewing the TV, press ENTER or DISPLAY
display/remove the information displayed
on-screen
various information about the disc
on-screen.
playback
TV
Disc Information
displayed differ depending
playing status.
type
or
You
can
on
Hokupand Setings
the disc
to
on-screen.
Indicates channel
audio
number, station
signal (STEREO, MONO)
name, and
received by
the tuner.
Indicates the record
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
3.
change
select
or
an
item
select the
by pressing v / V and
setting by pressing b / B.
For details about each
item,
see
the pages in
parentheses.
(or track) number/total
(or tracks) (page 28, 30)
[Chapter]: Current chapter number/total number
of chapters (page 28)
[Time]: Elapsed playing time (page 30)
[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 29)
[Subtitle]: Selected subtitle (page 29)
[Angle]: Selected angle/total number of angles
(page 30)
[Title]:
Current title
number of titles
Indicates current date and time.
Note:
If no button is pressed
display disappears.
for 10
seconds, the
on-screen
27
Playback
General
Features
Playback
Load your chosen disc in the
tray, with the playback side down.
2.
Starts
menu
3.
To
1.
playback using
the
HOME
(see
page
20).
press STOP
playback,
(x).
stopped point, depending on the disc. "Xx" appears
Press PLAY (N) to resume playback (from the scene point). If you press
("x" appears on the screen.), the unit will clear the stopped point.
stop
The unit records the
4.
Press OPEN/CLOSE
Press OPEN/CLOSE
(Z)
(Z)
to
on
the
STOP
screen briefly.
(x) again or unload
the disc
the disc.
remove
to close disc
tray
or
press POWER
(1),
the disc
tray closes automatically and unit
turns off.
Note:
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
(see "Rating", on page 24).
entered and/or the disc must be authorized
Buttons
PAUSE/STEP
(Z)
(X)
Opens
or
closes the disc
All Discs
tray.
press PAUSE/STEP
During playback,
playback.
Press PAUSE/STEP
(X) repeatedly
to
(X)
All Discs
to pause
play Frame-by-Frame.
Tip:
You
advance
back up the
picture frame-by-frame by
pressing
repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
can
or
b / B
Video CD.
SKIP
(.
/
>)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP . twice briefly to step back to the previous
chapter/track.
Tips:
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon.
On
Then, input the chapter number or use
Audio CD, to go directly to any track,
an
track number
using
the numbered buttons
b / B.
enter the
(0-9) during
playback.
SCAN
(m
/
M)
During playback, press SCAN (m
required scan speed.
or
M) repeatedly
to
select the
HDD, DVD; 5 steps
DivX; 4 steps
Video CD, Audio CD;
While the
3
steps
is
playback
paused, press
repeatedly to play in slow motion.
SCAN
(m
or
M)
HDD, DVD; 4 steps
CD; 3 steps (Forward only)
Video
ZOOM
During playback or pause mode, press ZOOM to enlarge
image.
x2 size
x4 size
x1 size (normal size)
(x1 size
You can move through the zoomed picture using bBvV
the video
→
buttons.
28
4-digit
Discs
Operations
OPEN / CLOSE
the
→
→
code must be
General
Features
Playback
(Continued)
Buttons
Operations
REPEAT
During playback, press REPEAT
desired repeat mode.
HDD
Discs
repeatedly
to select
a
DVD
(Title/Off),
(Chapter/Title/Off)
(Chapter/Title/All/Off)
Video CD, Audio CD (Track/All/Off)
MP3/WMA (Track/Folder/Off)
VR mode DVD-RW
Notes:
On
Video CD with
must set PBC to [OFF] in
Repeat function. See page 26.
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
a
Setup
REPEAT A-B
to
menu
use
PBC, you
the
the
During playback, each press of REPEAT A-B button to
point A and point B and repeats a sequence from
point A (Starting point) to point B (End point).
select
Note:
HDD
During
playback,
you cannot select
a
sequence less
than 5 seconds.
TITLE
If the current DVD title has
on
MENU/LIST
SUBTITLE
(
AUDIO
the
The disc
)
a
menu, the title
Otherwise, the disc
screen.
menu
appears
on
the
menu
menu
appears
may appears.
screen.
During playback, press SUBTITLE then press b
repeatedly to select a desired subtitle language.
/ B
Press AUDIO then press b / B repeatedly to hear
language or audio track.
a
different audio
Press AUDIO then press b / B repeatedly during playback
a different audio channel (STEREO, LEFT or
to hear
RIGHT).
With DVD-RW discs recorded in VR mode and HDD that
have both
a
main and
switch among Main
Press AUDIO
audio channel
INSTANT SKIP
a
(L),
Bilingual audio channel, you
(R), or Main+sub (L+R).
repeatedly during playback to
(STEREO, LEFT or RIGHT).
Press INSTANT SKIP
can
Sub
hear
repeatedly during playback
a
different
to
skip
forward 15 seconds.
In HDD
skips
playback
forward
or
Timeshift
or reverse
mode, each press
b / B
5 minutes.
29
If
is
The
displayed
DVD
VCD
may be displayed first after
Video CD which contains a menu.
loading
a menu screen
menu screen
DVD
or
Marker Search
a
HDD
-RW VR
+R
DVD
DVD
To enter
Usetheb/B/v/Vbuttonstoselectthe
Press TITLE
view, then press ENTER
want to
title/chapter you
start playback.
MENU/LIST to return to the
or
You
to
screen.
RAM
+RW
-R
VCD
Marker
a
start
can
from up to six memorized
at the
playback
To enter
points.
menu
-RW Video
desired
point
the TV
screen
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to six
on
on
briefly. Repeat
markers.
VCD
Use the number buttons to select the track you want
to view.
To Recall
1.
Press RETURN
to return to the
(O)
menu screen.
Clear
disc
search
menu
Menu
for
setting and the exact operating procedures
using the menu may differ depending on the
or
During
disc. Follow the instructions
screen.
Setup
the each
on
You may also set PBC to
(see
menu
[OFF]
2.
menu
3.
under
-RW Video
RAM
+RW
HDD
-R
or
Press ENTER and
marked
to another TITLE
press SEARCH. The marker
on the screen.
Useb/B/v/Vtoselectamarkedscenethat
scene
Moving
Marked Scene
appears
you want to recall
26).
page
a
playback,
clear.
playback
starts from the
Or, press CLEAR and the marked
scene.
is erased from the marker search
menu.
-RWVR
+R
DVD
DivX
When
disc has
a
another title
more
than
one
Press DISPLAY twice
during playback
v / V to select the title icon.
appropriate
select
a
can move
to
then
use
Then, press the
numbered button
(0-9)
or
b / B to
title number.
Time Search
+RW
title, you
follows:
as
-R
HDD
+R
-RWVR
DVD
-RWVideo
RAM
Camera
DivX
Angle
DVD
If the disc contains
To start
1.
playing
at any chosen time
Press DISPLAY twice
search box shows the
2.
on
the disc:
The time
during playback.
elapsed playing time.
3.
1.
Input
the
required
2.
start time in
seconds from left to
hours, minutes, and
right.
to
a
different
camera
during playback.
Display appears on the
TV
screen.
Usev/VtoselecttheAngleiconintheOnDisplay.
Screen
3.
If you enter the wrong numbers, press b / B to
move the under bar (_) to the wrong number. Then
recorded at different
Press DISPLAY twice
The On-Screen
Press v / V to select the time clock icon
and "0:00:00" appears.
scenes
angles, you can change
angle during playback.
camera
Use b / B to select
a
desired
The number of the current
TV
angle.
angle appears
on
the
screen.
enter the correct numbers.
4.
Press ENTER to confirm.
selected time.
Playback
starts from the
Tip:
The ANGLE indicator will blink
scenes
recorded at different
angle switching
30
is
possible.
on
the TV
angles
screen
at
to indicate that
Last Condition
Memory
This recorder memorizes the
DVD
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
recalled.
automatically
Notes:
Settings
stored in memory for
are
use
any time.
This recorder does not memorize
if you switch off the recorder
play it.
PIP
(Picture
-RW Video
in
+RW
Picture)
-R
settings of a disc
before commencing to
HDD
+R
-RW VR
DVD
VCD
This function enables you to view the stored stations
in sub picture during playback.
Playbck
On and off
Press PIP to switch
button
Input
again
on
the sub
mode selection for sub
Press AV to select the
picture.
picture,
press this
to switch it off.
input
picture
mode for the sub
Each time this button is
mode for the sub
picture
is
pressed, each input
displayed as shown
below.
Tuner→AV1→AV2 →AV3OPT→AV3 →AV4
Program
selection for sub
picture
change the program when sub
picture's input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Use v / V to
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
31
Movie List
DivX Movie File
Playing
a
The recorder
can
play
Divx files. Before
files, read "DivX file requirement"
on
playing
right.
DivX
play
back the DivX
file(s)
the selected media.
in the
USB device.
options
Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
[Movie List] menu options appear.
The menu options displayed differ depending on
1.
Note:
This recorder cannot
menu
2.
Pressv/V/b/Btoselectanoption,andpress
ENTER.
1.
Press HOME then select
2.
Select
a
[MOVIE] option.
media that contains DivX
press ENTER.
The [Movie List]
menu
appears
on
file(s)
[Play] Start playback the
[Open] Opens the folder
then
the TV
folder appears.
[Delete] Deletes the
screen.
selected title.
and
file(s)
or
list of files in the
a
folder(s)
from the
media.
[Rename] Edits the file name. (page 37)
[Move] Moves the file(s) to another folder
media. (page 38)
[Copy] Copies the file(s) to another folder
media. (page 38)
DivX file
3.
Press v / V to select
folder, and press ENTER.
A list of files in the folder appears. If you are in a
a
file list and want to return to the Folder
v / V buttons
on
the remote to
list,
use
the
and
highlight
press ENTER.
4.
If you want to view a particular file, press v / V to
a file and press PLAY (N).
You can use variable playback functions. Refer to
highlight
pages 28-31.
5.
Press STOP to
menu
stop the playback. The [Movie List]
appears.
Notice for
DivX file extensions:
(W
If the subtitle does not
".avi",
Playable DivX subtitle: ".smi", ".srt",
(Micro DVD format only)",
".txt (Micro DVD format only)"
Playable Codec format: "DIV3", "MP43", "DIVX",
"XVID", "DX50"
Playable
Audio format:
"AC3", "PCM", "MP2",
"MP3", "WMA"
Sampling frequency:
48 kHz (MP3),
within 8
-
within 32
-
48kHz
the DivX subtitle
display properly, please
follow
within 8
320kbps (MP3),
-
32
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660
(UDF Bridge format)
(total number
1.
Press PAUSE/STEP when the subtitle appears.
of files and
2.
Press and hold SUBTITLE about 3 seconds.
Notes
4.
code will appear.
Press b / B to select another
Press PLAY
language
displayed properly.
(N)
(WMA)
192kbps (WMA)
-
Maximum Files/Disc: Less than 1999
the subtitle is
H) pixel
".sub
steps below.
3.
x
".divx"
Bit rate:
displaying
language
or
requirement
Available resolution size: 720x576
the
The
or
to continue
playback.
folders)
DivX format
on
If the number of the
code until
frames per
screen
frame is
second, this unit may
not
over
29.97
operate
normally.
If the video and audio structure of recorded file is
not
interleaved,
returns to the
If the file is recorded with
only 1-point
*
menu screen.
GMC, the unit supports
of the record level.
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4
DivX
or
There
are
usually
32
encoders, like
Xvid, have this option.
different levels of GMC
called
1-point, 2-point,
or
encoding,
3-point GMC.
Playing
Audio CD
an
or
MP3/WMA
file
1.
The recorder
play
playing MP3/WMA files,
requirement" on right.
read "MP3/WMA audio
The HOME
2.
2.
3.
menu
[MUSIC] option.
Select
a
menu
The
menu
The
menu
media that contains MP3/WMA
options appear.
options displayed
Start
on
or
the TV
[Random]
audio
Start
screen.
Playback
You
track then press PLAY
depending
on
stop random playback.
file(s)
Edits the file
[Move]
Moves the
a
list of files in the
media.
(page 38)
from the media.
(page 37)
name.
file(s)
to another folder
or
[Copy] Copies the file(s)
media. (page 38)
to another folder
or
Adds the
track(s)
to
Playbck
List.
Program
starts.
variable
can use
playback
functions. Refer to
Random
1.
Press v / V to select
The
Tips:
2.
Press DISPLAY to view
ID3-Tag
the MP3 file. If
information is not
ID3-Tag
information for
number of MP3/WMA files in the folder
displayed.
Press DISPLAY
information
again
to
are
remove
the
move
to the upper
directory,
use
the v / V to
and press ENTER.
highlight
You also display HOME menu to select another
media by pressing HOME.
stop playback
options
a
file then press ENTER.
appear.
Press v / V to select
[Random] option
then press
ENTER.
automatically begins
and "RANDOM" appears
3.
To return to normal
option again
on
random
the
playback,
playback
menu screen.
select
[Random]
then press ENTER.
Tip:
screen.
If you want to
menu
The unit
present, [ID3-Tag: None] will appear. If you
select a folder, the number of subfolders and
To
or
the folder and
Deletes the
[Program Add]
(page 34)
(N).
pages 28-31.
5.
differ
folder appears
[Rename]
a
the Audio CD
on
the selected title.
playback
[Open] Opens
[Delete]
Use v/V to select
folder/file
Pressv/V/b/Btoselectanoption,andpress
[Play]
title then press ENTER.
The [Music List] menu appears
4.
a
then press ENTER.
ENTER.
appears.
Select
Music
options
menu
the selected media.
Press HOME.
1.
Press v / V to select
or
audio CDs and MP3/WMA files.
can
Before
file
Audio CD and Music
at any
time, press STOP.
during
Random
playback,
unit selects another track and
resumes
Random
By pressing
SKIP >
the
playback.
MP3/WMA audio file
requirement
File extensions
".mp3",
Tip:
You
on
can
create
new
the MUSIC-HDD
folder. Select
or
[New Album] option
MUSIC-USB
menu
ENTER. "NONAME##" folder is created.
then press
".wma".
Sampling frequency:
within 8 48 kHz (MP3),
-
within 32
-
48kHz
(WMA)
Bit rate:
within 8
-
320kbps (MP3),
32
-
192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660
(UDF Bridge format)
Maximum Files/Disc:
Less than 1999
(total
number of files and
folders)
33
with Audio
Program Playback
CD and MP3/WMA file
1.
contain up to 99 Audio CD tracks
MP3/WMA files.
Use v / V to select
a
Audio CD
menu.
1.
You
can
Music
or
track/file
menu
cancel the
by pressing
(or folder)
on
2.
The
files/tracks
Repeat step
(folders).
or
(folders)
2.
options
the left side of the
List
menu.
[Save]
If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.
Program
a
(N)
Playback stops
after
playing
the last
programmed
change
the
(HDD only)
Program
List
tracks.
Select
options appears
then press ENTER.
menu
[Delete] option
Track Order in the
Program
List
Select the track you wish to move on the Program
List. Use MARKER button to select multiple tracks.
2.
Press ENTER. The
3.
Select
4.
Use v / V to
track in the program list.
options appears
then press ENTER.
the yellow bar to the desired
menu
[Move] option
move
location, then press ENTER.
To exit
8.
Program Playback and resume normal
playback, select a track on the List and press
PLAY (N).
Save Your
you have
can access or remove
pressing
the
Program
List
screen
Program
List
(HDD only)
This recorder memorizes the
Tip:
You
by
1.
Select
The
MENU/LIST.
2.
user
program list that
programmed.
a
track
menu
on
the
options
Select
The
Program
List.
appear.
[Save] option then press ENTER.
Program List is saved in the HDD's
PROGRAM folder.
34
to
Tracks
Track from the
3.
1.
to start.
track(s)
Memorizes the program list.
Press ENTER. The
Use v / V to select the track you want to start
Press PLAY
Moves the
2.
Changing
playing.
Program
Select the track you wish to erase from the
Program List. Use MARKER button to select
list.
programmed track you selected last is
highlighted on the program list.
from the
Repeat mode.
[TRACK] Repeats the current track.
[ALL] Repeats all tracks on the Program List.
[OFF] Cancels Repeat mode (no display).
multiple
to the
track(s)
Press REPEAT to select the desired
1.
The
stop random playback.
or
Repeat Programmed
Erasing
move
then press ENTER
program order.
1-3 to mark additional tracks.
Note:
Use B to
option
menu.
[Move]
then
[Program Add] option
Start
Deletes the
[Delete]
on
an
[Play] Playback begins in the order in which you
programmed the tracks from the selected track.
folder.
[Random]
appear
Repeat steps
Use v / V to select
to confirm your selection.
press ENTER.
7.
Program
on
1 to mark additional file/track
Use v / V to select the
6.
the
CLEAR button. To
Press ENTER.
5.
on
Press MARKER.
marked file/track
4.
track/file
the
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
3.
a
selections, press CLEAR again.
Selecting multiple
2.
Press v / V to select
256
select all MP3/WMA files and folders
the Music
1.
or
options
menu
List then press ENTER.
The menu options appear.
Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can
List
Program
a
The recorder
can
JPEG
Photo List
JPEG File
Viewing
JPEG files. Before
play
recordings,
read "Photo file
playing
requirement" on
1.
menu
Press HOME.
The HOME
a
file
the
[Photo List]
differ
depending
on
then press ENTER.
The
menu
The
menu
options appear.
options displayed
on
the selected media.
menu
You
appears.
2.
Select
[PHOTO] option.
3.
Select
a
can
select all files and folders
pressing
menu
appears
on
the TV
1.
screen.
menu
by
selections,
again.
Selecting multiple
[Photo List]
the
on
CLEAR button. To cancel the
press CLEAR
media that contains JPEG file then press
ENTER.
The
options
Press v / V to select
1.
right.
menu
files
(folders)
Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or
2.
folder.
Repeat step
1 to mark additional file
Use v / V to select
2.
an
option
(folders).
then press ENTER
to confirm your selection.
[Open] Opens
the folder and
a
Playbck
list of files in the
folder appears
4.
Useb/B/v/Vtoselectafile,thenpress
[Full Screen]
ENTER.
screen.
The
menu
options
appear
on
the left side of the
[Delete]
menu.
If you want to
move
to the upper
directory,
use
and press ENTER.
highlight
You can also display HOME menu to select
media by pressing HOME.
[Full Screen]
another
then press
ENTER.
Depending
image
is
displayed
in full
screen.
upon the size and number of JPEG
a long time for the recorder to
name.
[Copy] Copies the file(s)
media. (page 38)
(page 37)
folder
to another folder
or
Tip:
You
The selected
full
menu.
[Move] Moves the file(s) to another
(album) or media. (page 38)
v / V to
Use v / V to select
Slide Show
Edits the file
[Rename]
the
as
Deletes the selected file from the media.
[Slide Show] Displays
Tips:
5.
Shows the selected file
can
Select
create
new
folder in the HDD
or
USB device.
then press ENTER.
"NONAME##" folder is created.
[New Album] option
files, it could take
read the files.
Photo file
requirement
File extensions
".jpg"
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
Press ENTER to appear or disappear this
during viewing the full screen.
menu
ISO 9660
(UDF Bridge format)
Maximum Files/Disc:
Less than 1999
6.
To
stop viewing
The
[Photo List]
at any
menu
time, press STOP.
appears.
Notes
on
(total
number of files and
Progressive
and lossless
files
supported.
are
folders)
JPEG file
not
compression
JPEG
image
35
To listen to music while slide show
Skip Images
While
once
viewing
a
press SKIP
picture,
to advance to the next file
or
simultaneously
(.or >)
return to the
You
previous
file.
Rotate
Images
can
display photo
files while
MP3/WMA music files recorded
Use v / V while
clockwise
or
1. Select
viewing
a
to
picture
flip
the
(Refer
picture
counterclockwise.
[Slide Show] option on the [Photo List] menu
"[Photo List] menu options" on page 35).
to
The Slide Show
3.
[Slide Show] option
to "Photo List
(Refer
menu
to
HDD.
2. Press ENTER.
View Slide Shows
1. Select
listening
on
the
menu
menu
[Simultaneous
Slide Show
[Photo List]
options" on page 35).
on
Select
appears.
Music
play] option
on
the
menu
2. Press ENTER.
The Slide Show
menu
appears.
4.
Press ENTER.
Simultaneous Music
5.
3.Useb/B/v/Vtosettheoptions.
[Object] option:
[Selected] Views
slide show
only
Select
Use the MARKER button to select
[All]
multiple
files.
menu
appears.
multiple files.
[Select All] option to select all tracks
press ENTER.
Select [Deselect
selected files.
play
Press MARKER to select
All] option
then
to deselect all
selected tracks then press ENTER.
Select [Cancel] option to exit this menu then
Views slide show all files.
[Speed] option:
press ENTER.
Sets the Slide Show
speed
to
[Slow], [Normal],
or
6.
[Fast].
Use b / B / v / V to
highlight [Start] option
then
press ENTER.
4. Select the
[Start] option
then press ENTER to start
the Slide Show.
5. Press STOP to
the
[Photo List]
stop the Slide Show and
returns to
menu.
To Pause the Slide Show
1. Press PAUSE/STEP
(X)
to pause slide show.
2. When you want to continue slide
PLAY
show, press
(N).
7.
36
Press STOP to
stop the Slide Show and
the
menu.
[Photo List]
return to
Editing
MP3/WMA, JPEG,
a
DivX
file
Naming
You
a
file
can name
on
MP3/WMA files
device
independently.
characters long.
These
descriptions are MP3 file's operation for
example, other kind's files are operated same way.
1.
Note:
The
2.
MP3/WMA, and DivX files
cannot be
copied
or
on
the disc
or
HDD
moved to USB device.
Select
file(s)/folder(s)
from the HDD
You
can erase
folder(s)
on
Select
You
a
can
pressing
MP3/WMA, JPEG
the HDD
or
1.
or
DivX
CLEAR button. To cancel the
or
USB
be up to 32
rename on
the
menu.
menu
options
appear
[Edit] option then
options appears.
on
the
menu.
press ENTER.
file(s)/
by
selections,
again.
Selecting multiple
files
or
2.
Playbck
(folders)
Press MARKER.
4.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
Select
[Rename] option then
Keyboard menu appears.
To enter
characters,
see
press ENTER.
page 51.
folder.
Repeat step
1 to mark additional file
(folders).
Press ENTER.
The
3.
the HDD
USB device.
file you wish to erase on the menu.
select all files and folders on the menu
press CLEAR
2.
on
can
USB device
USB device
or
1.
a
file you wish to
Select
Edit
Erasing
Names
or
Press ENTER.
The
3.
a
the HDD
menu
Select
options
appear
[Delete] option
file(s) is
The selected
on
the
menu.
then press ENTER.
deleted.
37
Copying
a
to another media or
file(s)
Moving
folder
You
You
can
copy
to another media
file(s)/folder(s)
a
Select
You
a
can
pressing
CLEAR button. To cancel the
1.
1.
by
2.
selections,
again.
files
Follow
(folders)
1-3
steps
as
shown left.
Press ENTER.
The
3.
Selecting multiple
file(s)/folder(s) to another media or
moving, the file(s)/folder(s) are deleted
from the current location.
file you wish to copy on the menu.
select all files and folders on the menu
press CLEAR
file(s)
can move a
folder. After
or
folder.
1.
a
options
Select
Move
appear
on
[Move] option
menu
the left side of the
menu.
then press ENTER.
will appear.
Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
folder.
or
2.
Repeat step
1 to mark additional file
(folders).
Press ENTER.
2.
The
menu
options
Select
3.
Edit
on
the
menu.
then press ENTER.
[Edit] option
options appears.
Select
4.
appear
Copy
[Copy] option
menu
4.
then press ENTER.
You
1.
appears.
can
After
select
a
album
(folder)
to
move.
selecting a media then press
(folder) list appears.
ENTER.
The album
2.
Select
a
folder.
Also, you
can
create
[New Album] option
new
on
album
the Move
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
5.
You
5.
1.
2.
can
select
a
album
After
(folder)
to copy.
selecting media then press ENTER.
The album (folder) list appears.
a
Select
a
folder.
Also, you
can
create
[New Album] option
new
on
album
the
Copy
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
Select
6.
[Copy] option
copying.
then press ENTER to
begin
Note:
If
a
folder's
available.
38
depth
is
more
than 5
level, the copy is
not
Select
[Move] option
moving.
then press ENTER to
begin
Notes:
Recording
About DVD
The maximum number of titles that
on
Using
recording
can
be recorded
the HDD is 255.
the HDD allows you to record
12 hours
a
maximum of
continuously.
Notes:
This recorder cannot make
recordings
on
CD-R
or
CD-RW discs.
The
Our company takes
failure due to power
no
responsibility
for
recording
outages, defective discs,
or
damage to the Recorder.
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper
Disc
and
care
of your discs.
types and recording formats, modes,
settings
This recorder
discs:
can play six different kinds of DVD
pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD-RAM, DVD+RW and DVD+R discs.
DVD-R, DVD+R, DVD+RW discs
The disc format for
is
always
"Video format"---the
DVD-Video discs. This
means
same as
that
pre-recorded
once
finalized, you
play a DVD-R, DVD+R, or DVD+RW in a regular
DVD player. The DVD-RAM disc format is Video
Recording (VR) format.
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording (VR)
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc
format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc
format is Video mode, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and
determine the picture quality and how much space the
recording will take up on the disc.
can
About HDD
recording
Recording to the internal hard disk drive (HDD) is
basically similar to recording to a VR mode DVD-RW
disc. You have the full choice of recording quality
options, including the manual mode, and of course
can record, erase and re-record as many times as
you like. The capacity of the hard disk drive means
that you can store many hours of video on it, even in
the higher quality recording modes. To help you
organize the contents, the HDD is divided into ten
you
genre. You can name and use these genres as you
like---for example, you might have a genre for movies,
another for TV shows, and one for camcorder
recordings.
Notes for
recording
recording
the recorder
times shown
uses
not exact because
are
variable bit-rate video
compression. This means that the exact recording
time will depend on the material being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
The recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 25 (Disc
Format) for how to do this.
When using a DVD-R or DVD+R disc, you can keep
recording until the disc is full, or until you finalize the
disc. Before you start a recording session, check
the amount of recording time left on the disc.
When using a DVD-RW disc in Video mode,
recording time available will only increase if you
erase
the last title recorded
The Delete Title
menu
option
hides the
only
on
the disc.
in the Title List
title, it does
the title from the disc and increase
time available
for the last recorded title
(except
DVD-RW disc in Video
Overwrite
recording
(Original)
actually erase
the recording
not
on a
mode).
is available
using
DVD+RW
discs.
When
using a DVD+R/RW, the recorder will execute
Menu-making operation to update the new title
and editing when removing the disc from the recorder.
So you must remove the disc after selecting the
recorder's operation mode to DISC mode.
the
Recording
There
time and
picture quality
four preset recording quality modes:
Highest quality setting, gives about 1 hour of
recording time on a DVD (4.7GB).
SP
Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD
(4.7GB).
LP
Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
EP
Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
You may see a fragmented picture during playing
XP
are
--
--
--
--
back the contents recorded in EP mode.
39
Timeshift
Do not miss
Clip
HDD
a scene
from
live broadcast. If the
a
You
telephone rings while you are watching your favorite
live broadcast, just press "TIMESHIFT" and "PAUSE"
before answering the phone. The timeshift function will
1.
later
viewing.
phone
call
or
2.
viewing interruption,
press
or "SCAN" to watch the program.
Press "STOP" to return to the live broadcast.
(Pause,
Operation
You
can
Live
to store the program
on
During Timeshift, use pause step, search and
slow-motion to find the starting point.
Press REC at the
Progress
Progress
starting point
of the section you
of the edit is indicated in red
on
the
Bar.
TV/Playback)
HDD
3.
store
a
program in the HDD storage cache
temporarily.
4.
Progress
shown below.
watching a TV program.
display appears on the screen as
The Progress Bar changes to timeshift
Use pause
the
step, search and slow-motion
to find
ending point.
Press REC at the
ending point
of the section you
want to record.
Press TIMESHIFT while
The
during Timeshift
(Hard Disk Drive).
want to record.
"PLAY"
Timeshift
HDD
edit
can
the HDD
be activated and the broadcast is then recorded for
After the
Record
Normal
Bar
5.
playback
Repeat steps
Records of
icon after 5 seconds.
a
continues.
1 and 4 to make several
Clip
program.
12
6.
Press STOP to
stop Timeshift.
Confirm message will appear.
34
5
Indicates
2.
Indicates current Timeshift
3.
Indicates Timeshift start time.
4.
Indicates Timeshift
mode.
position.
elapsed
Indicates the time that is
5.
Selected sections
time.
one
during
hour from Timeshift
trick
play
timeshift. Refer to
(Slow, Scan, etc.)
Playback Operation on
clip during
Clip
Jump
button is
pressed
stop automatically.
for 6
2.
one
in Timeshift mode. Press MARKER
point during
Timeshift.
Press SEARCH to recall the marked
40
scene.
to Start or End
Press ENTER
Press b and
beginning
the HDD.
during
during
Timeshift
timeshift. The
menu
will
playback
starts from the very
of the timeshift.
Press B and
hours, the Timeshift will
Marker Search in Timeshift mode
at the desired
on
appear.
deleted.
mark
recorded
are
recording is not available with Clip
Recording and Timeshift Operation. (available only
in MPEG2 recording format)
1.
There is not free space on the HDD, the oldest
timeshift section of the cache will be incrementally
can
screen.
MPEG4
Timeshift to
Notes:
You
the
less than 5 seconds.
functions
retain the program on the HDD. Refer to
Record on the right.
no
on
the program may not be recorded on the HDD.
Clip records cannot be made for sections lasting
pages 28-31.
You can edit the cached
If
displayed
Or,
If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
Tips:
can use
then press ENTER.
[Yes]
Notes:
start time.
You
Use b / B to select
press STOP again.
The current broadcast is
1.
playback
7.
jumps
to the very end of the timeshift
then goes to pause mode.
To Exit the Timeshift
1.
Press STOP to exit Timeshift function.
2.
Confirm message will appear.
Use b / B to select [Yes] then press ENTER.
The current broadcast is displayed on the screen.
Recording from
Basic
a
Follow the instructions below to record
Recording
starts
disc is full
or
To Pause the
TV
TV program.
and continues until the
a
Press PAUSE/STEP
2.
When you want to continue
PAUSE/STEP (X).
immediately
recording.
you stop the
To record
Note:
You must load
recordable disc for DVD
a
recording.
watching
The HOME
menu
appears.
2.
Select
[TV] option.
3.
Select
[TV HDD]
or
[TV DVD] option
then press
sure
that the TV
input
TV program while
one
Press TV/DVD to select the TV mode
2.
recording. The TV indicator appears.
Using the TV, select the channel to be
Instant Timer
If you load a completely blank disc, the recorder
takes a short while to initialize the disc.
recording mode as necessary by pressing
MODE repeatedly. (XP, SP, LP, EP)
5.
Use v / V buttons to select the TV channel to
a
REC
during
viewed.
Recording
Recording allows you to make a
recording easily of a preset length without using
recorder.
Set
recording.
recording, press
Instant Timer
is set to this
4.
to pause
another
ENTER.
Also make
(X)
1.
Press HOME.
1.
Recording
1.
Follow
steps
from
TV).
1.
a
Press REC
2.
time
record.
the
program timer.
1-5
as
shown left
(z) repeatedly
(Basic Recording
to select the
recording
length.
Changing TV Audio Channel
You
can
select the audio channel
by pressing
(language) to
during viewing TV program.
channel is displayed on-screen.
current audio
Stereo
or mono
Stereo
→
→
Left
The
Recording starts after the first press. Each
subsequent press increases the recording time
within free space (maximum 240 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
broadcast:
→
Right
Mono
→
broadcast:
Bilingual
Main
listen
AUDIO
Sub
Main+Sub
→
recording with bilingual, set audio channel
[TV Rec Audio] in sub-menu of the Setup
(see page 25).
Recording
For TV
from the
menu
If the sound is of poor quality when set to Stereo,
you can often improve it by changing to Mono (Left
or
Right).
record either NICAM
can
audio. If the NICAM
setting (page 21)
or
regular
is set to
then if the broadcast is
NICAM, the audio
automatically changes
to NICAM and you
Auto,
non-
NICAM, the regular audio is always recorded.
If NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
program.
(z)
will
screen
(z)
setting
for
a
automatically
recording
time. The
return to the TV
moment.
display
window.
To Extend the
Recording
Time
recording time can be extended anytime by
pressing REC (z).
Each subsequent press increases the recording
within free space (maximum 240 minutes).
If the recorder is
once.
Recording will start. (The
the display window.)
Recording
the disc
a
fixed
Recording
Press STOP
REC indicator
lights
time
(x)
to
on
length
right.
in
failure)
unplugged (or there is a power
recording, the recording
while the recorder is
will be lost.
continues until you press STOP
or HDD is full.
To record for
7.
recalled
Time
to check the
Caution
Press REC
Timer
Recording
once
The
can
record the NICAM audio. If the broadcast is
or
the
Press REC
Also, remaining time of recording is shown in the
This recorder
6.
Checking
of
time,
see
(x)
Instant
stop recording.
41
Timer
2.
Recording
Enter the necessary information for your timer
recording(s).
This recorder
can be programmed to record up to 16
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
b / B
(left/right) move the cursor left/right
v / V (up/down)
change the setting at the
current cursor position
Press RETURN (O) to exit the Timer Record
--
recorded, the starting and ending time.
Note:
If you
menu.
use a
blank disc for timer
completely
recording,
Press ENTER after
you must format the disc before starting timer
recording. (Refer to "Disc Format" on page 25.)
1.
--
Press TIMER REC to
3.
Press TIMER REC.
The Timer Record
in all the program
Set
a
mode
display
Timer Record List.
recording
necessary by pressing
repeatedly. (XP, SP, LP, EP)
as
REC MODE
will appear.
menu
filling
information.
4.
Press
ENTER, the program will be memorized by
the recorder.
To check the
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
[Media]
DVD).
[PR]
one
(You
Choose
Choose
a
a
media to record
[Date]
Choose
(HDD
or
memorized program number, or
inputs from which to record.
[Start Time]
[End Time]
a
input.)
date up to 1 month in advance.
Set the start time.
-
[PDC] The PDC system automatically adjusts
recording time so that even if a program is
not running to schedule, you won't miss it.
For PDC to work properly, you must input the
the
correct announced time and date of the
program you want to record.
Note that PDC may not work with every station
Notes:
PDC
include PDC
typically
guide pages.
pages when setting a
information in the teletext TV
Please refer to these
timer
recording.
using PDC, there may be instances
where the beginning of the program is not
When
recorded.
42
5.
Press RETURN
6.
Make
programmed
(O)
to exit the Timer Record List.
that you load a recordable disc for DVD
and press POWER to switch your unit to
sure
recording
Standby.
Notes:
The timer indicator
active.
[Repeat] Choose a desired repeat (Once,
Daily (Monday Friday), or Weekly).
use
is
lights in the display window
standby with the timer
displayed while the [Power Save
when the recorder is in
Set the end time.
Stations that
the Timer Record List
recording
correctly.
of the external
cannot select DV
on
the Timer Record List
(Nothing is
ON.)
For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 25).
You must press STOP to stop the timer recording.
If you set a timer recording to record to DVD but
Mode]
is
there isn't
a
recordable DVD loaded at the time of
the
recording, the Recovery Recording feature will
automatically record the program to the HDD for
you.
MPEG4
recording is not available with Timer
recording. (available only in MPEG2 recording
format)
Recording with
VIDEO Plus+ System
Timer
This
3.
You
can change the information as required using
b/B/v/V(Media,PDC,etc.)
Refer to "Timer Recording" on previous page.
4.
Choose
5.
Press
system makes programming timer recordings
simple. Most TV guides publish VIDEO Plus+
programming numbers with their program details.If
you want to make a timer recording of a program, you
just input the corresponding VIDEO Plus+
programming number. The date, start, stop and
channel settings are made automatically. All you have
to do is tell the recorder the recording mode, and
whether it's a once-only recording, or a regular
recording.
Up to 16 timer programs can be stored in the
very
record mode
a
ENTER,
To check the
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
trademarks of Gemstar
The VIDEO Plus+
are
system is manufactured under
license from Gemstar
1.
registered
Development Corporation.
Development Corporation.
menu
will appear.
Press VIDEO Plus+ button
[Number]
again
to exit the
Enter the VIDEO Plus+
EP).
by
on
the Timer Record List
the Timer Record List
recording
is
programmed
correctly.
6.
Press RETURN
(O)
to exit the Timer Record
menu.
7.
Make
that you load a recordable disc for DVD
and press POWER to switch your unit to
sure
recording
Standby.
Press VIDEO Plus+ button.
The VIDEO Plus+
or
the recorder.
recorder.
VIDEO Plus+ and PlusCode
(XP, SP, LP,
the program will be memorized
menu.
Recording
programming
number.
2.
Use the number buttons then press ENTER to
enter the VIDEO Plus+ programming number.
To check the
menu
programming,
the Timer Record
will appear.
If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
43
Checking
Timer
If two
or more timer programs overlap:
The earlier program takes priority.
When the earlier program finishes, the later
Recording
Details
Programming
is turned
can
program starts.
If two programs
be checked whenever the recorder
Press TIMER REC twice.
on.
Use v / V to select
timer
a
set to start at
are
exactly
the
same
time, the program entered first takes priority.
recording.
If the disc is damaged,
complete successfully.
Press ENTER to edit the selected program.
Timer Record menu appears.
the
Check field shows "Rec.
may not
recording
In this
case even
OK", it may
Press CLEAR to delete the selected program
though
the
not be.
from the Timer Record List.
Recording from
Input
from External
Recording
You
a
can
record from
camcorder
Make
external
an
component, such
as
to any of the
inputs.
that the
sure
Components
VCR, connected
or
recorder's external
1.
External
an
from is connected
component you
properly
want to record
to the recorder. See
page 13-14.
Canceling
You
can
a
clear
Timer
a
timer
recording actually
2.
Recording
Choose
using
setting anytime
before the
3.
starts.
a
media
HOME
Press AV
(TV HDD or TV DVD)
(see page 20).
to record
menu.
repeatedly
to select the external
Use v / V to select a program you want to erase
the Timer Recorder List. If you want to erase the
program, press CLEAR.
on
After
a
Timer
a
timer
Recording
recording
has
AV1: EURO AV1 AUDIO/VIDEO mounted
back
in
Progress
started, you
can
AV4: AV IN 4
front
Recording Troubleshooting
though
on
(VIDEO,
disc loaded and there is not free space
the HDD.
4.
[Disc Protect] option
menu
5.
the HDD.
is set to
[ON]
and there is not free space
page 26).
Power is turned
in the
on
Setup
the HDD.
(see
the HDD.
You cannot enter
A
a
timer program when:
recording is already underway.
you're trying to set has already passed.
There are already 16 timer programs set.
The time
44
panel
(L/R)) mounted
on
on
front
panel
as necessary by
repeatedly. (XP, SP, LP,
or
Press REC
(z) once.
Recording will start. (The
the display window.)
or
REC indicator
lights
continues until you press STOP
in
(x)
the disc is full.
To record for
Timer
6.
mode
recording
REC MODE
Recording
are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+R, DVD+RW) recorded
on the disc and there are already 255 titles
on
Select the
on.
There
recorded
back
panel
pressing
EP)
A non-recordable disc is loaded and there is not
on
on
AUDIO
OPT will not be recorded.
the timer is set, the recorder will not
no
free space
back
Note :
record when:
There is
on
panel
DV: DV IN mounted
Even
on
panel
AV3: AV IN 3 mounted
still
cancel the program.
Press STOP.
Timer
to
Tuner: Built-in tuner
AV2: EURO A/V2 DECODER mounted
Stopping
input
record from.
a
fixed
Recording"
Press STOP
(x)
to
on
length
of
time,
see
"Instant
page 41.
stop recording.
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 55 for more details.
Recording from
Before DV
DV
1.
Input
Make
dubbing
2.
Select
menu
You
a DV-equipped camcorder to this
single DV cable for input and output
of audio, video, data and control signals.
This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
can
recorder
connect
using
a
You cannot connect
at
more
than
one
3.
16-bit/48kHz,
or
is
input
choose between Audio 1
HOME
you require.
(original audio)
as
(overdubbed audio).
is set from the
Input
sub-menu of the
Setup
Audio"
Recording
4.
on
[DV
Rec
menu.
Audio]
in
See "DV
page 25 for
more
can
record
one
tape, or if the power fails in
component, or the DV cable becomes
disconnected.
repeatedly to select the DV input.
display window and on the
TV
screen.
5.
Find the
place on the
recording
want to the
camcorder
tape that you
to start from.
For best results, pause playback at the
which you want to record.
stereo
unrecorded section of
Press AV
DV appears in the
twin stereo tracks of 12-
only
[DV Rec Audio] option to [Audio 1]
or [Audio 2] as required (see page 25).
Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Picture disturbance on the recording may occur if
the source component pauses playback or plays an
source
can
DV
audio track. Set
the
[TV DVD] option on the
(see page 20).
or
information.
equipment connected via the DV IN jack (including
two recorders).
It may not always be possible to control the
connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as
bit/32kHz. This recorder
[TV HDD]
then press ENTER.
and Audio 2
DV camcorder
You cannot control this recorder from external
stereo
your digital camcorder is connected to
DV IN jack. See page 14.
panel
Check that the DV audio
You
time to this recorder.
a
sure
the front
point
from
on your camcorder, you can use this
recorder's remote to control the camcorder
Depending
using
6.
the
STOP, PLAY and PAUSE functions.
Press REC
(z) once to start recording.
Recording is automatically stopped if the
recorder detects no signal.
You can pause or stop the recording by
pressing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
Recording
You
can
record from
the DV IN
Using
from
jack
on
a
a
Digital
remote control
Camcorder
In Video
digital camcorder connected
panel of this recorder.
to
the front
the recorder's remote, you
can
during recording.
mode, the final frame of the recording
may remain displayed
after recording stops.
on screen
for
a
while
control both the
camcorder and this recorder.
Before
recording, make sure that the audio input
jack is set up (see page 25).
Troubleshooting
for
the DV IN
If you cannot get a picture and/or audio
DV IN jack, check the bullet points:
Tips:
The
Make
source
signal
must be DVC-SD format.
Some camcorders cannot be controlled
using
this
switch back
You cannot control this unit
from
remotely
jack.
cable,
one.
You cannot record date and time information from
the audio
on
a
input.
the connected
not be able to control it
to the DV IN
properly connected.
equipment then
off the connected
Notes:
Depending
a
the
on.
Try switching
If you connect a second recorder using a DV
you cannot control the second DVD from this
DV cassette.
the DV cable is
Try switching
recorder's remote.
component connected
sure
through
supplied
using
camcorder, you may
the remote control
with this recorder.
MPEG4 recording is not available with the DV
dubbing. (available only in MPEG2 recording
format)
45
Simultaneous
recording
MPEG4
and
playback
You
another title
Playback
during recording
and
recording for both DVD and built in hard
(HDD) are completely independent. For
Playback
disk drive
you can record to either the DVD or HDD
and play back video from the other source at the
example,
source
same
1.
3.
2.
Press HOME to
3.
Usethev/V/b/BandENTERbuttonsto
recording.
select
a
Start
The
display
different media
the Home Menu
type that you
screen.
want to
a
Start
you want to record
(TV
recording mode as necessary by pressing
repeatedly. (XP, SP, LP, EP)
Recording.
the HDD.
List]
play
playing
back the
menu.
To
listed
are
back
play
an
the
on
MPEG4
[Movie
recordings,
You cannot edit the video content with MPEG4. If
you want to edit functions, set the [MPEG4]
to [OFF] on the setup menu (See page 25).
You can't
use
recording
while
simultaneous
playback
set to
copying.
during
appear.
A button is not activated
simultaneous
during MPEG4 recording.
(PLAY, TIMESHIFT, MENU/LIST, HOME, etc.)
The loss of video may occur while MPEG4
recording because of characteristics of MPEG4
mode.
recording
video
HDD
play back
simultaneously.
can
1.
Start HDD
2.
Press PLAY
option
If you press MENU/LIST when [MPEG4] option is
[ON] in HDD mode, the [Movie List] menu will
and
This function is not available in MPEG4
You
the current title in
encoding.
This is not
a
malfunction.
select the audio channel to record
by
pressing AUDIO. The [TV Rec Audio] option on the
Setup menu does not affect to the MPEG4 recording.
recording
can
recording.
(N).
playback starts and the recording will continue
while playing back.
YoucanusePAUSE(X)andSCAN(m/M)
buttons for pause, scan, slow-motion during
playback.
The
Press STOP
(x).
The playback will stop
recording position.
then returns to the current
Notes:
Playback cannot be started
after recording starts.
until 15 seconds
This function does not work in DVD
recording
Video
mode.
of MPEG4
Encoding
Encodeing: XVID
Format
Resolution: 640
x
480
480
x
352
352
x
256
Recording
format
(XP, SP mode),
(LP mode),
(EP mode)
Audio
Encoding Format
Encodeing: AC3
Quality: 128 kbit/sec, 48 kHz (Sampling rate),
Stereo
Maximum Titles
Maximum Title Size
2
This function is not available in MPEG4
recording
Specifications
Less than 1999 titles
mode.
GBytes
If the size of title recorded
2GBytes,
the
recording
presently
when
creating
the
Recordable Time
Approx.
409 hours
more
during
a
than
a new
few seconds
title.
(160GB)
(XP mode),
(SP mode), 281 hours (LP mode),
(EP mode)
168 hours
220 hours
new
is
will be continued in
title. The unit cannot record
46
setup
Notes:
continue while
You cannot edit programs
recording and playback.
3.
Set
on
Notes:
You
the
on
refer to pages 32.
Playback.
recording will
Slip
source
The recorded contents
media from the other mode.
Time
input
[ON]
This unit will record the video with MPEG4 format
back.
4.
to
REC MODE
4.
Start
video with MPEG4 video format.
a
[MPEG4] option
(See page 25).
Select
HDD
channel, AV input, etc).
time.
1.
record
can
Set the
menu
2.
Recording
123
Editing
Title List and
Chapter
45
67
List Menu
Overview
Using the Title List menu you can edit video content.
editing features available in the Title List menu
depend on whether you are editing video on DVD, or
the HDD, and whether you're editing Original content,
or a Playlist.
The
There
You
are
can
two ways to edit VR mode DVD-RW discs.
edit the Original content of the disc,
directly
you can create and edit a Playlist. The Playlist
doesn't actually change any of the content on the
disc, but just controls how the content is played back.
or
Editing material recorded on the HDD is similar to
editing the Original content of a VR mode DVD-RW,
with similar commands for erasing and naming titles,
as well as fine control over the content of chapters
1.
within titles for DVD disc.
if you display the Title List menu for
of the titles may appear with a mark.
These titles were recorded with a Line Input setting
During recording,
HDD,
some
different to the current
During recording,
1.
setting
of the recorder.
these titles cannot be
played.
Press MENU/LIST to
Playback
should be
display the Title List menu.
stopped when you do this.
If you press MENU/LIST when [MPEG4] option
is set to [ON] in HDD mode, the [Movie List]
menu
You
will appear.
also access it
can
select
using
HOME menu,
then select
[MOVIE] option
[DISC] option and press
[HDD]
or
ENTER.
When
selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist
part of the
screen are
screen
the
menu
-
options.
shows thumbnails of the
(or chapter) on the DVD or HDD. You can
change these thumbnails using the THUMBNAIL
button---see Changing Title Thumbnails on page 48.
titles
Press DISPLAY to
title
on
display
the Title List
2.
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use
v / V to select a option then press ENTER to confirm
your selection.
To exit the Title List menu, press RETURN
mode, free space, and
time progress bar.
Current media
selected title.
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number
of titles.
7.
(O)
Un-do/Re-do the last deletion/ action.
Indicates the record
elapsed
3.
After
2.
[Undo]/[Redo]
(page 52)
the information of selected
menu.
Edit ng
-
menu.
On the left side of the
The main
options: To display menu option, select a
chapter then press ENTER. The options
displayed differ depending on the disc type.
or
[Combine] Combines two titles or chapters into one
(page 52, 53).
[Delete] Deletes the title or chapter. (page 50)
[Delete Part] Deletes a part of the Title (page 50).
[Divide] Divides a title into two (page 53).
[Dubbing] Copies the title to another media. (page 55)
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 54)
[Move] Moves a chapter on the Chapter List-Playlist
menu to a position on the menu. (page 54)
[Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
[Playlist Add] Adds the title or chapter to the Playlist.
(page 49)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 54)
[Rename (Title Name)] Edits the title name. (page 51)
[Search]
[Chapter]; Displays Chapter List of the Title.
[Time]; Search time for you want start point
of the title. (page 51)
[Sort] Lists the programs on the Title List menu by
Date, Title, or Category. (page 52)
[Title] Displays Title List of the chapter.
Note:
the
Menu
title
Shows the title name, recorded
date, and
recording length.
repeatedly.
47
HDD, VR Mode: Original and
Playlist Editing
Adding Chapter
HDD
Titles, Chapters and Parts
Titles in the disc's
You
content contain
original
-RWVR
can
chapter
one or
chapters. When you insert a disc's title into the
Playlist, all the chapters within that title also appear. In
other words, chapters in the Playlist behave exactly as
chapters on a DVD-Video disc do. Parts are sections
of Original or Playlist titles. From the Original and
Playlist menu you can add or delete parts. Adding a
chapter or title to the Playlist creates a new title made
up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the
Original or Playlist menu.
create
RAM
chapters
Markers
+RW
within
marks at the desired
+R
a
title
by inserting
points.
more
Caution
When
editing using
functions, the
the
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see "Auto Chapter" on page 25).
During recording
want to start
A
momentary pause between edits. This is
not
HDD
DVD like
a
editing
a
video
a
DVD, you edit by making
'Playlist'
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
-RW VR
a
of
'Original'
and
'Playlist'
picture
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
on
Playlist:
disc
48
content refers to what's
actually
recorded
the disc.
---
content refers to the edited version of the
how the
Original
content is to be
played.
the
The still
Original
RAM
+RW
+R
is
from the
from within
one
picture
Playlist
or
currently displayed
that appears in the Title List menu.
that you choose appears in both the
menu.
Tip:
change the thumbnail picture of the title
Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
on
RAM
Original:
-RWVR
title.
You
About word
screen.
Title Thumbnails
Press THUMBNAIL to make the
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With
the TV
Each title displayed in the Title List menu
represented by a thumbnail picture taken
start of that title or chapter.
If you prefer, select a different still picture
a
malfunction.
editing
tape?
on
you
start and end frames may not be
exactly as set in the start and end point display.
During Playlist playback, you may notice a
Is
playing back, at the point
chapter, press CHP ADD.
marker icon appears
chapter
Changing
Delete, Add and Move
or
a new
can
the
also
Making
-RWVR
a
New
Adding Additional Title/Chapters
RAM
to the Playlist -RW
Playlist
RAM
VR
Use this function to add
You
the
an Original title or chapter to
Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don't need
later
see Deleting an Original or Playlist
title/chapter on page 50).
Playlist
1.
can
add
title
Choose
menu or
if you add more chapter markers to the Original
these are not automatically copied over into the
Playlist
You
can
add up to 999
only
title/chapter
Choose
Playlist,
a
to the
or
menu
options
on
appears
the left side of the
screen.
later,
chapters to one disc If you
chapter of a title, use the Adding
Playlist on this page.
.
a
title or chapter on the Title List-Original
Chapter List-Original menu to put into the
then press ENTER.
menu
options
appears
on
the left side of the
2.
menu.
2.
title
a
menu or
The
a
title.
want to add
1.
to
then press ENTER.
Playlist,
The
Original title or chapter to add
if it is already registered.
chapter on the Title List-Original
Chapter List-Original menu to put into the
a
---
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
an
even
Use v / V to select
options
Use v / V to select
[Playlist Add] option
then press
ENTER.
3.
[Playlist Add]
from
menu
then press ENTER.
Choose
a
registered
Title
List-Playlist
to insert
a
title
that is
or
already
chapter, then
press
Edit ng
ENTER.
4.
Repeat steps 1-3
the Playlist.
to add additional title
or
chapter
on
You
can
view the added
List-Playlist
3.
Select
The
chapters
on
the
Chapter
menu.
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
[New Playlist]
new
chapters
5.
Press RETURN
back to the Title
(O) to exit,
List-Original
or
MENU/LIST to go
menu.
49
Deleting an Original
Title/Chapter
or
When you
from the
erase a
title
or
chapter
Playlist
You
menu, you only remove it from the Playlist;
title/chapter remains in the Original menu.
If you choose to delete
a
title
or
Deleting
chapter
Playlist
can
a
delete
a
Part
HDD
-RW VR
part which you do
RAM
not want in the
title.
the
1.
Useb/B/v/Vtochooseatitleyouwantto
delete
from the
The
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2.
on
the Title List
options
appears
then press ENTER.
the left side of the menu.
menu
on
Select
[Delete Part] option then press ENTER.
Edit (Delete Part) menu appears on the TV screen.
[Start Point] icon is highlighted.
Edit
Example:
(Delete Part) (HDD)
Note:
It may not be possible to delete
than 5 seconds long.
1.
chapters
that
are
less
Useb/B/v/Vtochooseachapterortitleyou
on the Title List or Chapter List
want to delete
menu
The
then press ENTER.
menu
options
appears
on
the left side of the
screen.
Select
2.
3.
[Delete] option
from the
options
on
the
menu.
4.
Example:
Title List
Starts
and
playback
use
slow-motion to find the
(HDD)
Press ENTER at the
pause step, search and
starting point.
starting point
of the section
you want to delete.
'End Point' icon is highlighted.
The
5.
6.
part is indicated
Use pause
the ending
step,
on
the
Bar.
point.
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
select
Progress
search and slow-motion to find
[Cancel]
point,
of the section
use
v / V to
icon then press ENTER.
Tip:
With HDD
Select
Press ENTER to confirm.
3.
The confirm message for
deleting
ENTER, then repeat steps
will appear.
Use b / B to select
[Yes] then press ENTER.
chapter or title is deleted.
After pressing ENTER, the new, updated menu
displayed.
4.
7.
The selected
5.
Repeat steps
1
-
is
4 to continue to delete from the
menu.
(O) repeatedly
to exit the
menu.
Notes:
When DVD+RW
is
changed
If
more
titles
recording,
name
to 'Deleted Title'.
than two titles
are
the deleted title's
are
combined into
repeatedly deleted,
the
one.
When you are deleting a title or chapter, only the
last one on DVD+RW increases remaining recording
time.
50
If you finish to
ENTER.
3-6.
edit, select [Done] icon then press
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
List
Press RETURN
6.
recordings, you can delete additional part.
[Next Part] icon on the menu then press
menu
appears.
Note:
It may not be possible to delete
than 3 seconds long.
parts that
are
less
Naming
You
can
Time Search
Title
Playlist
titles
be up to 32 characters
and
long.
Original
can name
Names
1.
a
Choose the title you want to
menu, then press ENTER.
The
options
menu
appears
independently.
RAM
You
1.
Use v/V to select
3.
menu
-RWVideo
+R
point
of the title.
[Rename (Title Name)] option
Useb/B/v/VtochooseatitleontheTitleList
The
2.
then press ENTER.
appears on the left side of the
options
Select
menu
Example:
appears.
appears
Title List
menu.
then press ENTER.
[Time] option
[Search]
then press ENTER.
Keyboard
select start
menu
the left side of the
menu.
2.
can
-R
-RWVR
the Title List
name on
on
+RW
HDD
on
the TV
screen.
(HDD)
Enteranameforthetitle.Useb/B/v/Vto
select
a
character then press ENTER to confirm
your selection.
Use MENU/LIST button to
change keyboard
type.
OK: Select to finish.
Current
picture
Cancel: Cancels all entered characters.
Inserts a space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
End time
position.
b / B: Moves
cursor
to left
or
right.
Start time
Selected time
Tip:
Remote control buttons for
PLAY
X
x
(N):
Inserts
a
(PAUSE/STEP): Deletes
the cursor position.
(STOP),
Selected
a name
cursor
. / >: Moves
the after character at
3.
(0-9):
to left
or
point
5 minute
4.
right.
Edit ng
Use b / B to find the
The
point you want to start.
increase 1 minute step.
If you press and hold b / B then the
previous
position.
cursor
point
position.
cursor
CLEAR: Deletes the
character at the
Numbers
entering
space at the
point
increase
step.
Press ENTER to start selected
point.
Enters the
character at the
cursor
corresponding
position.
Tip:
You
can
add the genre
only
for HDD title
4.
Choose OK then press ENTER to fix the
and return to the previous menu screen.
5.
Press RETURN
(O) repeatedly
name.
name
to exit the
menu.
Notes:
Names
can be up to 32 characters long.
For discs formatted on a different recorder, you will
see only a limited character set.
When
recording
on
discs, the entered
player only
DVD-R, DVD+R
name
is
displayed
or
DVD+RW
on
the DVD
after finalization.
51
Sort
This function allows you to
organized by Date, Title,
HDD
menu.
So you
access
or
show
Category
on
listings
the Title List-
find title you want to watch
can
easily.
Choose any title
press ENTER.
1.
The
menu
on
options
the Title List-HDD menu, then
appears
on
HDD
Use this function to combine two
HDD titles into
Use v/V to select
Sort
options
This function is not available if there is
If there
[Sort] option
only
one
titles within the HDD.
the left side of the
are more
than 60 titles
on
the
HDD, you
cannot combine the titles.
then press ENTER.
appears.
adjacent Original-
one.
Notes:
menu.
2.
Two Titles Into One
Combining
HDD
1.
On the Title List-HDD menu, select the first title of
the two titles you want to combine then press
ENTER.
The
menu
options
appears
on
the left side of the
screen.
2.
[Combine] option
then press ENTER.
Use v/V to select [Date], [Title] or [Category]
option then press ENTER.
After pressing ENTER, the sorted menu is
displayed.
3.
Undoing/Redoing
Deletion
-RW VR
the Last
3.
undo the last
one
deletion you
made).
Use v / V to select
[Undo] option then press ENTER.
It doesn't matter whether you are currently in the
menu screen; the last deletion is undone.
Notes:
You can't undo
a recording.
anything after ejecting the disc from the
recorder or switching the recorder into standby mode.
You can still undo a deletion even after exiting the
menu display.
You can't undo
Tip:
You
can
option.
redo the last undo action
Select the second title of the two titles you want to
combine then press ENTER.
Confirm message appears.
RAM
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
52
Select
using
the
[Redo]
4.
Use b / B to select
[Yes] then press ENTER.
pressing ENTER, the updated menu is
displayed.
After
Divide One Titles Into Two
HDD
One
+RW
Use this command to
1.
split
a
title up into two
On the Title List menu, select
divide then press ENTER.
The
Combining
menu
options
appears
on
a
new
titles.
title you want to
the left side of the
2.
Select
Example:
Title List
+RW
+R
into
RAM
adjacent Playlist
or
one.
Note:
This function is not available if there is
1.
[Divide] option.
-RWVR
Into
Chapters
Use this function to combine two
Original chapters
chapter
screen.
HDD
Two
On the
chapter
(HDD)
only
one
within the title.
Chapter
List menu, select the second
chapters you want to combine
of the two
then press ENTER
The menu options appears
on
the left side of the
screen.
2.
Use v / V to select
[Combine] option.
The combine indicator appears between the two
chapters you want to combine.
3.
Press ENTER.
Edit (Divide)
highlighted.
Current
menu
appears.
[Divide] option
is
picture
3.
Press ENTER.
The first title's
thumbnail
The second title's
thumbnail
4.
Use
play, pause step, search and slow-motion
point you want to divide the title.
Edit ng
to
find the
5.
Select
[Divide] option
then press ENTER at the
point.
To reset the
point, select [Cancel] option
Repeat from step 3.
then
press ENTER.
6.
Choose
[Done] option
dividing point.
then press ENTER to fix the
The title is divided into two
new
titles. It take up to
4 minutes to divide.
Note:
You cannot select
dividing point
less than 3 seconds.
53
Moving
-RW VR
a
Playlist Chapter
Tip
RAM
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can 'show' it by choosing
[Show] option on the menu. After doing that, you are
able to
see
the
Protect
Note:
This function is not available if there is
only
a
chapter
Title
+RW
+R
-RW VR
Use this function to
Select
a
chapter
the
on
Chapter List-Playlist
menu.
Press ENTER.
2.
The
menu
on
appears
the left side of the
menu.
[Move] option
from
Playlist
then press ENTER.
options
4.
Hide
a
You
skip playing chapters
Chapter/Title
or
+RW
+R
titles without
deleting
from the disc.
1.
Use vVbBto choose
to hide
on
the Title List
a
or
chapter
Chapter
or title you want
List menu, then
press ENTER.
Options
2.
Select
appear
the left side of the
screen.
Title List
(DVD+RW)
Press ENTER to confirm.
The
54
on
[Hide] option.
Example:
3.
protect against accidental
or
of the title.
deleting
Press MENU/LIST to
display
Use vVbBto choose
chapter's
or
Options
3.
Useb/B/v/Vtochoosetheplaceyouwantto
move the chapter to then press ENTER.
After pressing ENTER, the updated menu is
displayed.
can
2.
RAM
a
the Title List
menu.
title you want to
protect
then press ENTER.
Use v / V to select
3.
recording, editing
1.
options
title.
one
chapter.
1.
or
title's thumbnail will dim.
4.
Select
appear
[Protect]
on
the left side of the
from the
screen.
options.
Press ENTER to confirm.
The lock mark will appears
on
the title's thumbnail.
Tip
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
[Protect] option from the Title List menu options. After
doing that,
you
can
edit and delete the title.
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
Dubbing
Before
Use the
Dubbing
copying
Back up
DVD.
features of this recorder to:
stored
important recordings
on
the HDD to
Make
play
a DVD copy of a
in another player.
Transfer video from
a
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
a
recording
on
the HDD to
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
DVD to the HDD for
editing.
PICTURE
PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
Transfer edited video from the HDD to DVD.
THE 'STANDARD DEFINITION' OUTPUT. IF
The
simplest method of copying is to use the One
Touch Copy feature. Using this you can very simply
copy the title that's currently playing from HDD to
DVD,
or
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL
HDD/DVD
625p
RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
the other way around.
Note:
If the title's
length is less than 5 seconds,
(from HDD to DVD)
the
dubbing
is not available.
Restrictions
on
copying
Some video material is copy-once
material cannot be copied to HDD
protected:
or
Such
DVD.
You
can identify copy-once protected material during
playback by displaying disc information on-screen.
NTSC format
from the
analog or the DV
correctly with this recorder.
Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
signals
is not recorded
inputs
Fast
copying (Maximum 12x)
Copying between DVD and HDD is a completely
digital process and therefore involves no loss of
quality in the audio or video. This means that you can
transfer back and forth without having to worry about
the quality getting worse with each copy 'generation'.
It also means that copying can be carried out at the
maximum speed possible.
When copying from HDD to DVD, the speed of
copying depends on the recording mode and the kind
of DVD disc you're using.
Minimum fast
copying
protection system (with scramble
system) only allowing the recording of 'copy once'
a
copy
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
CPRM
recordings
can
only
be made
discs formatted in VR mode
or
on
DVD-RW
DVD-RAM
discs, and
CPRM
are
times
time for 2 hours of video recorded with SP
mode.
What is 'CPRM'?
CPRM is
copying
The table below shows the minimum HDD to DVD
format.
recordings can only be played on players
specifically compatible with CPRM.
that
Disc
Disc
Type
Speed
Copying Time
(Record Speed)
DVD-R / DVD+R
16x
DVD-R / DVD+R / DVD+RW
8x
6.5 min.
8 min.
DVD+R DL
8x
13 min.
(4x)
DVD-RW
6x
12 min.
(6x)
DVD-RAM
5x
11.5 min.
DVD-R / DVD+R
4x
13 min.
(12x)
(8x)
(5x)
(4x)
DVD-RW / DVD+RW
DVD-RAM
Copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
This
product incorporates copyright protection
technology that is protected by method claims
certain U.S.
rights
of
patents and other intellectual property
owned
by
Macrovision
Corporation
17 min
3x
DVD+R / DVD+RW / DVD+R DL
DVD-R / DVD-RW / DVD-RAM
21 min.
2.4x
(3x)
(2.4x)
25 min.
2x
(2x)
Notes:
All times in the above table
are
approximate.
Actual copy speed varies with the
being recorded.
part of the disc
There may be cases where even 4x/6x/8x/16x
compatible discs do not copy at full speed.
Fast
copying
initialized
on
may not be possible when
another recorder.
using
disc
and other
55
Dubbing from
1.
Dubbing from
HDD to DVD
On the Title List-HDD menu, select
a
title you want
1.
to dub then press ENTER.
The
menu
options
on
appears
the left side of the
Use v / V to select
[Dubbing] option
then press
Fast),
(XP, SP, LP, EP,
To
information
on
Fast
stop dubbing
highlighted,
at any other
press ENTER.
time, press
(x).
time of
[Fast]
data size of
mode could be varied
source.
Stopping dubbing in [Fast] mode partway through
will cancel the recording and any data recorded up
to that point will be lost.
If the
The
and
4.
When
[Start] icon
Dubbing starts.
5.
To
stop dubbing
is
highlighted,
at any other
press ENTER.
time, press
(x).
space on the disc is
mode is not available.
remaining
[Fast] mode is not available
Clip Recording title.
insufficient, the
for edited HDD title
Depending on the conditions of the recording
equipment or the disc itself, the dubbing may
capable.
not be
Stopping dubbing in [Fast] mode partway through
recording and any data recorded up
to that point will be lost.
will cancel the
The
recording
time of
[Fast]
mode
can
take up to 19
minutes.
The
[Fast]
mode is not available for edited title
the DVD-RW with VR
56
(XP, SP, LP, EP,
Notes:
recording
depending on
[Fast]
appears.
Only available when copying VR mode disc
(See page 55 for more information on
copying.)
STOP
Notes:
The
menu
to HDD.
Fast
icon is
[Start]
Dubbing starts.
STOP
then press
Fast),
Fast:
more
copying.
5.
[Dubbing] option
then press V.
'Start' icon is highlighted.
highlighted.
Fast: See page 55 for
When
the left side of the
Use b / B to select record mode
or
then press V.
'Start' icon is
4.
on
appears.
Use b / B to select record mode
or
Use v / V to select
Dubbing
menu
3.
3.
appears
title you want to
ENTER.
ENTER.
Dubbing
options
a
screen.
2.
2.
On the Title List menu, select
dub then press ENTER.
Menu
screen.
DVD to HDD
recording
mode.
on
One Touch
Copy (HDD
to
DVD)
The One Touch
Copy feature copies the currently
playing title from the HDD to DVD. The whole title is
copied, regardless of where in the title you start
copying. The recorder copies at the maximum speed
possible.
For One Touch
to
Copy
work, make
sure
that
a
recordable DVD disc is loaded.
During
HDD
playback,
press DUBBING to copy the
current title to DVD.
The
on-screen display indicates that the title
copied. Playback continues while copying.
You cannot
copy
a
the One Touch
use
title if any
Copy
is
being
function to
part of the title is copy-once
protected.
One Touch
One Touch
Copy
Copy (DVD
from DVD to HDD
to
copies
HDD)
a
single
title to the HDD in real time. When you start copying,
playback jumps back to the start of the title, then
continues
through to the end of the title, when
recording automatically stops. The copy will be
in the recording mode (XP, SP, LP, EP) that is
currently set.
During
DVD
playback,
made
press DUBBING to copy the
current title to HDD.
Playback
starts
again
current title. The
title is
from the
on-screen
beginning of the
display indicates that
the
being copied.
Notes:
Video CD cannot be
The
copying stops
badly scratched or
copied
to HDD.
when then recorder detects
copy
Dub ing
a
protected part.
If some part of the title being copied is copyprotected, copying will start, but the copy-protected
portions will not be copied.
During Playlist
title's
playback,
One Touch
Copy
is
not available.
Tip:
To
stop dubbing
at any other
time, press STOP (x).
57
2.
Reference
To overwrite
a new
video
You
can remove
STOP
+RW
recording
Play
will appear
menu
or
stop mode.
as
shown below.
Tip
Additional Information
Overwriting Recording
Press TITLE in
Title List
on a
the Title List
menu
by pressing
(x).
previously
recorded
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
Select
1.
input
you want to record
source
(TV
channel, AV1-4, DV).
Press MENU/LIST to
2.
display
the Title List
menu.
To
3.
play
back
a
press ENTER
title, select the title you
or
PLAY
want then
(N).
Playing Your Recordings on Other
Players (Finalizing a Disc)
Most
regular
DVD
recorded in Video
players
play
can
Use vVbBto choose
3.
a
title you want to
Check the manual that
Press REC
4.
Overwrite
to start overwrite
(z)
recording
recording.
point
starts from the start
new
(x)
to
stop the overwrite recording.
title is created and
updated
menu
is
displayed.
Notes:
If the overwrite is
longer
of the current
a
protected title.
recording
than the
title, the
overwriting stops
at the
protected, the
starting point of the
title.
If the selected title's
seconds,
recording length
Title List
can
1.
58
player
to
play.
'fixes' the
recordings and editings in place
be played on a regular DVD
computer equipped with a suitable DVD-
that the disc
so
player
or
can
ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
view the Title List
player
that is
on
disc, refer
to "Finalize"
on
page 26.
Notes:
Unfinalized DVD+RW is
displayed on the
capable of playing DVD+RW
menu
DVD+RW disc recorded
playable
on
regular
DVD
players.
The edited contents of
compatible
Any edited
compatible
on
regular
a
DVD+RW disc is
DVD
players only
contents of the DVD+R disc
on
regular
DVD
How
long
disc,
how much is recorded
already.
finalization takes
number of titles
on
DVD+R DL disc
can
finalize.
or
a
after
are
not
players. (Hide, chapter
combine, added chapter mark, etc.)
DVD+R discs.
Insert DVD+R
To finalize
finalization.
+R
other DVD
or
displayed
or Players
menu
other DVD Recorders
You
is less than 10
the next title is overwritten. But if the next
protected, overwriting stops.
Viewing
+RW
not.
next title is
overwritten. But if next title is
title is
with the other
play
or
for
This function is not available for
length
also
of
Finalizing
Press STOP
The
came
or
can
mode, finalized
check what formats of discs it will
the title.
5.
players
DVD-RW discs recorded in VR
overwrite.
finalized discs
mode, finalized DVD+R
DVD+RWs. A small number of
DVD
depends
on
the
on
disc,
the
type of
and the
the disc.
take up to 30 minutes to
Language Codes
Use this list to
Disc
Audio,
your desired language for the
Subtitle, Disc Menu.
input
Disc
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
Switzerland
CH
CN
Indonesia
ID
Nigeria
Norway
NG
China
NO
Thailand
TH
Colombia
CO
Israel
IL
Oman
OM
TR
Congo
CG
Italy
IT
Pakistan
PK
Turkey
Uganda
Costa Rica
CR
Jamaica
JM
Panama
PA
Ukraine
UA
Croatia
HR
JP
United States
US
KE
Paraguay
Philippines
PY
CZ
Japan
Kenya
PH
Uruguay
UY
Denmark
DK
Kuwait
KW
Poland
PL
Uzbekistan
UZ
Ecuador
EC
LY
Portugal
PT
Vietnam
VN
Egypt
EG
Libya
Luxembourg
LU
Romania
RO
Zimbabwe
ZW
El Salvador
SV
Russian Federation
RU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
Czech
Republic
SG
SK
UG
59
the Radio Stations
Presetting
You
preset
can
Before
50 stations for FM and AM
make
tuning,
sure
(MW).
that you have turned down
the volume.
Press FM/AM
2.
And then every time you press
AM (MW) changes alternately.
(MW)
3.
Preset radio stations in the unit's memory first
radio stations" on the left).
on
the remote control until FM
appears in the
display
Press and hold TUN.- b
or
or
Press FM/AM until AM
AM
display
window.
Press PR/PRESET
2.
on
on
indication starts to
change,
stereo
program)
display
5.
To turn off the radio
Press ENTER
A
on
the remote control.
Press POWER to turn the Recorder Receiver off
preset number will flash in the display window.
Press PR/PRESET
+ or
PR/PRESET
remote control to select the
preset
-
on
select another function mode
on
the remote control.
For manual
The station is stored.
7.
To listen to
Use manual
Press ENTER
Repeat steps
a
Press TUN.- b
3 to 6 to store other stations.
station with
or
tune in the station
TUN.+ B
a
weak
repeatedly
in
or
etc.,).
automatic
tuning,
tuning
in
press TUN.- b
step
or
2.
TUN.+ B
on
repeatedly.
For automatic
signal
step
AV 1, AV 2
non-preset radio stations
or
the remote control
TUN.+ B
To tune in
(DVD,
the
number you
want.
6.
repeatedly
preset station
-
a
window.
4.
-
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
3.
appear in the
PR/PRESET
Each time you press this button, the Recorder Receiver
one preset station at a time.
then
when the Recorder Receiver tunes in
+ or
the remote control to select the
tunes in
release.
Scanning stops
station. "ST" (for
FM appears in the
or
you want.
the
remote control for about three seconds until the
frequency
(MW)
window.
The last received station is tuned in.
FM and
FM/AM,
TUN.+ B
(see
"Presetting
1.
1.
to the Radio
Listening
seconds
on
on
tuning, press and hold TUN.- b or
the remote control for about three
the remote control.
3 to
manually.
For your reference
To clear all the stored stations
Press and hold ENTER for about five seconds to clear
all the stored stations.
If
an FM program is noisy
Press MO./ST. on the remote control
dis-appears
stereo
effect, but
this button
To
again
60
that "ST"
display window. There will be no
the reception will improve. Press
to restore the stereo effect.
improve reception
supplied antennas.
Reorient the
so
in the
RDS
Programme Search (PTY)
Operation
This unit is
A
which
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
broadcasts with
Now in
use
in many
countries, RDS is
a
system for
the correct time.
Tuning
When
a
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
sign
Window
and the RDS indicator will
as
well
as
light
in the
Display
indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS
Display Options
The RDS
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
sign
station is first tuned. In normal
a
display
will indicate the station
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data
PS
types in the sequence:
PTY
FREQUENCY
(PS
(Programme
RT
CT)
Service
channel is shown in the
name)- The name
Display Window.
benefit of RDS is its
indicate the
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
RDS
major
of the
following
ability to encode
Programme Type (PTY) codes that
type of material being broadcast. The
list shows the abbreviations used to indicate
each PTY
along
with
an
explanation
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
Speech Programme
Music
EASY M
Easy Listening
LIGHT M
Classical Music
CLASSICS
Serious Classical Music
OTHER M
Other Music
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
PHONE IN
Phone-In
TRAVEL
Travel and
LEISURE
Leisure and
RT
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
(Programme type recognition)- The name
type is shown in the Display
of
A "text" message contains special
information from the broadcast station. Note that
(Radiotext)-
this message may scroll
permit
CT
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
Note:
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not
Window will show
PS NONE
a
being transmitted,
PTY
message.
NONE,
RT
the
NONE,
CT
Display
NONE,
Music
WEATHER
the programme
Window.
PTY
of the PTY.
Touring
Hobby
Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
You may search for a specific
by following these steps:
1.
2.
4.
Programme Type (PTY)
Press FM/AM to select FM mode.
Press PTY
on
the remote
show the last PTY in
3.
Message
Broadcast Information
Press PTY
repeatedly
When the PTY is
control, the display will
use.
to select
a
desired PTY.
selected, press and hold PTY.
The unit will go into an automatic search mode.When
station is tuned, the search will stop.
a
61
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Solution
The power cord is disconnected.
No power.
Plug
the power cord into the wall
outlet
No
service.
contacting
picture.
securely.
The TV is not set to receive recorder
Select the
signal output.
on
The video cable is not connected
Connect the video cable
the TV
appropriate video input
the picture from the
mode
so
recorder appears
the TV
on
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
audio cable is not set to receive
recorder
signal output.
The audio cables
not connected
are
the TV.
on
audio receiver
mode
input
the
on
you can listen to the
sound from the recorder.
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
The
is
playback picture
connecting
The disc is
cord is
damaged.
Turn
the
on
connected
equipment
with the audio cable.
it with
Replace
new one.
Clean the disc.
dirty.
poor.
The recorder does not
start
No disc is inserted.
Insert
a
disc.
(Check that the disc
display window is lit.)
indicator in the
playback.
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check the
disc
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
side
playback
down.
The disc is not
placed
within the
guide.
The
picture from
input is
the
dirty.
The
level is set.
The video
Cancel the
the
from the external
signal
component is copy-protected.
external
distorted
Some channels
skipped over
usingv/V.
are
Those channels
are
not stored in the
picture or sound of
broadcasting channel is
weak or missing.
Aerial
Camcorder
Camcorder is off.
The
image
is not
image
via
or
cables
are
Camcorder
input
or
rating
Rating
function
or
change
level.
Connect the component
your TV.
Restore channels. See
directly
to
"Program
Edit"
page 21.
Tighten
loose.
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
shown.
A/V
tray
guide.
You cannot connect via this recorder.
on
recorder.
when
the disc
on
inside the
Clean the disc.
The disc is
Rating
Place the disc
correctly
The recorder's
source
is incorrect.
Use AV to select
input
channel
(AV1,
AV2, DV, etc.)
DV IN to
recorder is not shown
on
TV
screen.
Radio stations cannot
The antenna is
be tuned in.
connected
CHECK CABLE appears
in the Display window.
62
The
positioned
poorly.
or
system cable is connected
incorrectly.
Connect the antenna
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
Check the status of connection and
connect the
system cable securely.
Cause
Symptom
Cannot
The disc
play a disc
using this
recorded
recorder
on
Some
another
Solution
recorded in Video mode.
was
will not
players
play
Finalize the disc.
(page 26)
No solution.
even a
finalized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
player must be RW
compatible in order to play it.
mode,
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
blank space
remaining
The
source
protected.
When
setting
When
the
protected
recording
possible.
to record is
trying
recording channel,
on
recording
programs that
is not
are
you
copy
channel is tuned
Timer
the
on
disc is insufficient.
successfully.
the TV's
to
a
own
the
source.
Select the channel
the recorder's
on
built-in TV tuner.
tuner.
Video mode
You cannot record the
Use
disc,
a
VR mode formatted disc for
copy-once material.
are
copy-once
cannot be recorded.
Clock in recorder is not set to correct
Set clock to correct time. See "Auto
time.
Clock Set"
or
"Manual Clock Set"
on
page 22.
Timer has been
programmed
Reprogram
Recording"
incorrectly.
Timer record indicator
appear after
Stereo Audio Record
and/or
Playback
TV is not
is not
does not
light
programming timer.
Reprogram
page 42.
Timer.
No solution.
Stereo-compatible.
Broadcast program is not in stereo
present.
Timer. See "Timer
on
No solution.
format.
The recorder A/V Out
jacks are
jacks.
Make A/V connections. Stereo is
not
connected to TV A/V In
available
only
via A/V
output from the
recorder.
The recorder Audio/Video Out is not
Select AUX
selected for
input.
viewing
at the TV.
or
A/V
source as
TV
The recorder's TV audio channel is
Set TV audio channel mode to Stereo.
set to
See
mono.
"Changing
TV audio channel"
on
page 41.
The remote control
The remote control is not
does not work
the remote
properly.
sensor
pointed
Point the remote control at the remote
at
of the recorder.
sensor
of the recorder.
The remote control is too far from the
Operate
recorder.
7m.
There is
an
obstacle in the
path
of the
the remote control within
Remove the obstacle.
remote control and the recorder.
The batteries in the remote control
are
Resetting
the recorder
If you observe any of the
The unit is
on or
following symptoms...
but the power will not turn
off.
The front
The
plugged in,
Replace
the batteries with
new ones.
exhausted.
panel display is not working.
recorder is not operating normally.
...you
can
reset the recorder
as
follows:
Refrnce
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.
Unplug
the power
plug it in
and then
cord, wait
at least five
seconds,
again.
63
Specifications
General
Power
AC
Power
35W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
200-240V, 50/60 Hz
440 X 55 X 280
4.6
mm
(w
x
h
x
d)
without foot
kg
5˚C to 35˚C
5 % to 90 %
system
PAL
Recording
format
PAL
I, B/G, I/I, SECAM D/K, K1 colour system
Recording
format
DVD Video
Recording
Recordable media
Recordable time
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Recording, DVD-VIDEO
(160GB), DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable, DVD+Recordable (Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
DVD+R DL (8.5GB): Approx. 3 hour (XP mode),
3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode),
10 hours 30 minutes (EP mode)
HDD (160GB, MPEG2 Recording):
Approx. 43 hours (XP mode), 84 hours (SP mode),
164 hours (LP mode), 233 hours (EP mode)
HDD
Video
27MHz
MPEG2
or
MPEG4
(HDD only)
48kHz
Dolby Digital
Playback
Frequency
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
DVD
(PCM 48 kHz): 8 Hz to 20 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
Hz to 20 kHz
Inputs
Audio
input (optical audio)
AERIAL IN
VIDEO IN
AUDIOIN
DV IN
3 V
(p-p), 75 Ω, Optical connector x 1
input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBm morethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (IEEE 1394 standard)
Aerial
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI video/audio
Audio
64
output
output (analog audio)
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
x
2
x
1
/ SCART
x
2
Amplifier
Stereo mode
100W
Surround mode
+
(Rated Output Power 100W, 6Ω at
100W (Rated Output Power 100W,
1
kHz, THD
THD 10
10
%)
%)
Center*: 100W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Tuner
100W
+
Front: 100W
Surround*: 100W
+
Subwoofer*: 200W
100W
(Rated Output Power 100W, 6Ω at 1 kHz, THD 10 %)
(Rated Output Power 150W, 3Ω at 30 Hz, THD 10 %)
Specifications
87.5
Tuning Range (FM)
Frequency (FM)
Signal-to-noise ratio
Tuning Range (AM)
Intermediate Frequency (AM)
Intermediate
-
108 MHz
10.7 MHz
60 dB
522
(Mono)
1,611 kHz
-
450 kHz
Antenna
Wire antenna
antenna
Loop
(FM)
(AM)
Speakers
Front
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Max.
Net
Rear
Center
(LHS-76TF5S)
Input Power:
Dimensions(WxHxD):
Net Weight:
3
Way
6
Speaker
Type:
Impedance:
Frequency Response:
6 Ω
180
-
20,000 Hz
83 dB/W
Sound Pressure Level:
(1m)
200W
280
5.2
Max.
1298
x
x
280
mm
kg
(LHS-76TF5S)
Type:
Impedance:
Frequency Response:
Sound Pressure Level:
Max.
Net
Input Power:
Dimensions(WxHxD):
Net Weight:
(LHS-76TF5C)
Net
Input Power:
Dimensions(WxHxD):
Net Weight:
2
Way
5
Speaker
6 Ω
180
-
20,000 Hz
83 dB/W
(1m)
200W
500 x170
1.8
x
70
mm
kg
Active Subwoofer
3
Way
6
Speaker
6 Ω
180
-
20,000 Hz
83 dB/W
(1m)
-
200W
280
x
5.2
kg
1298
x
(LHS-76TF5A)
90W
consumption:
1 Way 1 Speaker
Type:
3 Ω
Impedance:
50
1,500 Hz
Frequency Response:
Sound Pressure Level:
82 dB/W (1m)
Max. Input Power:
400W
Net Dimensions(WxHxD):
236 x 435 x 391 mm
Net Weight:
14 kg
Power
280
mm
Accessories:
Video cable
System
x
cable
Design
1, Audio cable x 1, Scart cable x 1, RF 75-ohm Coaxial cable x 1, Speaker cable x 5,
1, FM Antenna cable x 1, AM Antenna cable x 1, Remote control x 1, Batteries (AAA)
x
and
specifications
are
subject
to
change
x
2
without notice.
65
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
obliged
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
does not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
Call 0870 873 5454
MODEL NO.*
*
Please
complete
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
LGEUK Website
(
P/NO
:
service website
MFL30582426
:
:
www.lge.co.uk
www.lgelectronics.co.uk )
Download PDF

advertising