LG | LH-T760IA | LG LH-T760IA Owner’s Manual

LH-T7654IA_NA4ULLD_ENG
DVD RECEIVER
OWNER'S MANUAL
MODEL: LH-T760IA
(Main Unit: LH-T760
Speakers: LHS-76IAS, LHS-76IAC,
LHS-76IAW)
R
USB
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
CAUTION: The
CAUTION
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
(dripping
as
or
vases,
CAUTION
Most
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
a
(OR BACK)
is,
appliance
REFER SERVICING TO QUALIFIED SERVICE
placed
upon
outlet circuit which powers only that
no additional outlets or branch
and has
circuits. Check the
PERSONNEL.
be
they
circuit;
single
a
the Power Cord
recommend
appliances
dedicated
That
NO USER-SERVICEABLE PARTS INSIDE
concerning
page of this owner's
specification
manual to be certain.
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
an
Do not overload wall outlets. Overloaded wall
loose
damaged
or
wall
outlets,
outlets, extension cords,
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
frayed
shock to persons.
could result in electric shock
The exclamation
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
the
product.
it, discontinue
replaced
with
use
an
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Slots and
and to
openings
ensure
in the cabinet
reliable
operation
are
of the
provided for ventilation
product and to protect
Periodically
unplug
appliance, and have the cord
replacement part by an
exact
authorized servicer.
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
fire.
of the
Protect the power cord from
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
or
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the
plug
is
easily
accessible.
it from
over heating.
openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
The
POWER: This unit
WIRING: This unit is
amp mains
the manufacturer's instruction have been adhered to.
always
Never
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER APPARAT
CLASSE 1
PRODUIT
on a
mains
supplied
with
a
BSI 1363
LASER
use a
WARNING: A mains
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
player
plug removed from the mains lead of
destroyed. A mains plug with bared
must be
CAUTION:
plug,
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain it for future reference.
ensure
Should the unit
require maintenance,
contact
an
authorized
service center.
Use of
controls, adjustments
procedures
other than those
or the performance of
specified herein may result
hazardous radiation exposure.
prevent direct exposure to laser
To
or
with the earth
or
a
mains socket.
symbol
fitted,
use
a
pin,
or
5 amp
BLUE:
or
fuse, either in the
IMPORTANT: The wires in this mains lead
accordance with the
-
marked with the
coloured green
at the distribution board.
following
are
coloured in
codes:
NEUTRAL, BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD
correspond
in
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
letter E
green and yellow.
If any other plug is
WHEN OPEN AND INTERLOCKS DEFEATED.
a
13
approved
fused at 5 amp. When replacing the fuse
5 amp BS 1362, BSI or ASTA approved type.
Do not connect either wire to the earth
product employs
200-240V,
plug,
wires is hazardous if inserted in
To
of
use
this DVD
This
supply
this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of
plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type
fitted. Please refer to the wiring instructions below:
LUOKAN 1 LASER LAITE
KLASS 1
operates
50/60Hz.
with
the
coloured
player may not
marking identifying
the
terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N
or
coloured black. The wire which
is coloured brown must be connected to the terminal which
is marked with the letter L
or
coloured red.
Introduction
Maintenance and Service
MaintenanceandService.................3
Beforeuse.............................4
Refer to the information in this
FrontPanel/RearPanel...................5
contacting
a
chapter
before
service technician.
RemoteControl.........................6
HANDLING THE UNIT
Installation and
Setup
When
shipping
TVConnections.........................7
Optional Equipment
Connections
.
.
.
.
.
.
.
.
.
.
.8
AerialConnections......................8
Assembling and Connecting to the Speakers .9
SpeakerSystemConnection...............9
HDMIConnection......................10
.11
Displaying Disc Information on-screen
InitialSettings.........................11
GeneralOperation......................11
Language...........................11
Display.............................12
.
.
.
.
Please
save
Others..............................14
at the
factory.
the exterior surfaces clean
Keeping
Do not
near
Operation
Additionalfeatures.....................16
ControllingtheTV......................16
.17
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................17
ViewingaJPEGfile....................18
PlayingaDivXMoviefile................19
.
.21
PresettingtheRadioStations
ListeningtotheRadio...................21
RDSOperation.........................22
SleepTimerSetting.....................23
.
.
.
.
.
.
.
.
.
.
such
as
insecticide spray
Do not leave rubber
or plastic products in contact
long period of time. since they
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
Do not
or
strong solvents such
use
thinner,
these
as
as
might damage
alcohol, benzine,
the surface of the
unit.
.
DVDAudioDiscs.......................20
.
liquids
with the unit for
moistened
Generalfeatures.......................15
volatile
use
the unit.
surfaces
.
packing
.
5.1SpeakerSetup.....................13
Lock(ParentalControl).................14
.
carton and
original shipping
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Audio..............................13
.
the
the unit
.
Dimmer...............................23
Maintaining
the Unit
The DVD/CD Receiver is
a high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
device. If the
are
dirty
or
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
Mute.................................23
For
UsingHeadphoneJack..................23
Selectinginputsource...................23
XTS/XTSpro...........................23
service center.
VIRTUALsound........................23
details, please
Disposal
use.
contact your nearest authorized
of your old
symbol
product it means the product
by the European Directive
SoundMode...........................23
is attached to
REFERENCE
2002/96/EC.
is covered
LanguageCodes.......................24
AreaCodes...........................24
Troubleshooting.....................25-26
Specifications.........................27
appliance
1. When this crossed-out wheeled bin
a
2. All electrical and electronic
products should
disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
be
government
or
the local authorities.
3. The correct
This
product
is manufactured to
with the radio interference
of EEC DIRECTIVE
comply
requirements
89/336/EEC,
93/68/EEC and 73/23/EEC.
will
disposal of your old appliance
help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about
disposal of your old appliance, please
contact your
service
the
or
city office, waste disposal
shop where you purchased
the
product.
3
Introduction
Before
of
Types
use
Playable
Discs
DVD
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
(8cm/12cmdisc)
reference.
Video CD
This manual
provides
information
on
the
(VCD)
(8cm/12cmdisc)
operation
Audio CD
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
(8cm/12cmdisc)
In
addition, this unit
SVCD and CD-R
About the
"
Symbol Display
MP3, WMA, JPEG
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
Note:
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
is applicable only
symbol.
to the disc
of the
following symbols
represented by the
one
or
DivX files.
as
the
Notes
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
globe
DVD and finalized DVD±R/RW
DVD Audio discs
number must match your DVD
code or the disc cannot play.
Regional
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from
Digital
Theater
Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-
patents issued and pending. "DTS" and "DTS Digital
Surround"
are
Inc.
Inc.
clearly
visible
on
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Audio CDs
4
a
numbers in it
Video CDs
Systems,
Systems,
"ALL".
Codes
Most DVD discs have
wide
DVD-RW, DVD+RW,
titles,
a
Code
Regional
This unit has
unit. This unit
A section whose title has
play
CD-RW that contains audio
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
specific
Used in this Manual
Indicates
can
Notes:
DVD video disc.
Symbol
or
registered trademarks of Digital Theater
Copyright 1996, 2003 Digital Theater
All Rights Reserved."
Code" appears
on
the TV
screen.
Front Panel/Rear Panel
PHONES connector
STANDBY/ON
DISC
Lights
Press and hold down this button about 3
mode
OPEN/CLOSE button
red when the
receiver is in
seconds, then press repeatedly
Standby
VOLUME controller
DISPLAY Window
Remote
a
sensor
port
Connect to
a
USB
MONO/ST./
port of
memory
TUNING(-/+)
/SKIP(.bb/BB>)
P./STEP
memory device
(USB
to select
other function.
(off).
USB
Introducin
FUNC./PLAY
Tray
STANDBY indicator
etc.)
STOP
buttons
Power Cord
SPEAKER connectors
FM Antenna connector
OUTPUT
(TO TV)
EURO AV socket
Connect to
SCART
a
TV with
jack.
L
AUDIO
R
AM
Loop
Antenna connectors
S-VIDEO OUT connector
Cooling
HDMI OUT
MONITOR OUT connector
fan
COMPONENT VIDEO OUT terminals
Connect to
AV2 AUDIO
Do not touch the inner
panel.
Electrostatic
permanent damage
a
TV with Y Pb Pr
Input (L/R)/VIDEO
pins of the jacks on
discharge may cause
the
inputs.
IN Connectors
HDMI
output
providing
interface
a high
quality
for digital
audio and video.
rear
to the unit.
5
AUX
Selects
DVD
Select the
output
tuner
System' s
(FM
To
enjoy
VIRTUAL
and AM
Selects the VIRTUAL sound
MARKER
Marks
0-9 numerical buttons
directly
a
or
Displays
Selects
enjoy great
an
audio
language (DVD)
audio channel
b/B/v/V
Selects
menu
or
Reverse/ Forward slow
Displays the disc's Title
VOLUME
To
adjust speaker volume.
Accesses
Program
menu.
Enter
a
radio station's
frequency
into the
tuner.
CLEAR
(./>)
STOP ( x )
Removes
a track number on the
program menu or a mark on the
MARKER SEARCH menu.
(X)
(B)
MUTE
ZOOM
SLEEP
REPEAT
Set the
all
ly
REPEAT A-B
Repeats
or removes
MEMO.
REVERSE/FORWARD SKIP
Repeat chapter, track, title,
menu, if available.
(+/-)
PROG.
playback.
PLAY
selection.
menu
TITLE
.
forward.
PAUSE/STEP
the
TUN.(-/+) (b/B)
SCAN/SLOW(bb/BB)
Search backward
menu.
To tune in the desired radio station.
DVD disc.
menu on a
in the
Select programme of Radio.
MENU
Accesses the
option
an
display.
PRESET(v/V)
SETUP
setup
menu.
(left/right/up/down)
Acknowledges
(CD).
SOUND
or removes
setup
ENTER
an
Selects the sound mode.
Accesses
language (DVD).
Accesses On-Screen
sound effect.
or
subtitle
DISPLAY
AUDIO
Selects
a
Removes the
sound.
To
menu.
RETURN
natural and realistic
more
MARKER SEARCH
SUBTITLE
menu.
enjoy
point during playback.
a
SEARCH
service, programme number
select numbered options in a
XTS pro
To
the multimedia files.
BAND
bands)
Select
input
tray.
source.
USB
(CD/DVD).
source
and closes the disc
Opens
POWER
Select the
(Z)
OPEN/CLOSE
Remote Control
at
a
System to turn
specified time.
off automatical-
RDS
To view the various
sequence.
displays
of the RDS
options
RESOL.
the resolution
your TV.
Changes
on
depending
PTY
To start
a
search for
a
specific
PTY
type.
HDMI
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
DIMMER
Press to change brightness of the
display window on the front panel
in power-on status.
during
TV
To control the TV.
(LG
TV
only)
(See page16)
Remote Control
Remote control
Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
sensor
Angle:
About 30° in each direction in front of the remote
sensor
Remove the
remote
6
new
batteries. Never mix different
battery
AAA) batteries
correctly.
types of batteries (standard, alkaline, etc.).
with
installation
cover on
control, and insert
Caution
Do not mix old and
battery
the
rear
two R03
and
of the
(size
aligned
Installation and
Setup
TV Connections
Make
the
one
of the
following connections, depending
existing equipment.
on
of your
capabilities
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
Tips:
S-Video cable
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
jack on the DVD/CD
jack on the TV using
the
(S).
Video connection
Connect the MONITOR OUT
from the DVD/CD
connections described below.
Receiver to the VIDEO IN
the TV
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
video cable
make the best connections.
Make
using
the
supplied (V).
Component
Video
(Color
Stream
)
connection
Connect the COMPONENT VIDEO OUT
Caution:
sure
directly
jack
jack on
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
protection system.
the DVD/CD Receiver to the
on
the TV
using
an
Y Pb Pr
SCART connection
the TV
using
the scart
If your television is
(TO TV) socket on
corresponding in jacks
cable (T).
a
high-definition
or
"digital
you may take advantage of the
DVD/CD Receiver's progressive scan output for the
ready" television,
VIDEO
INPUT
INPUT
InstaliodSeup
Connect the EURO AV OUTPUT
the DVD/CD Receiver to the
on
Rear of TV
S-VIDEO
jacks from
corresponding in jacks
cable (C).
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Y
Pb
SCART INPUT
highest
video resolution
possible.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
Pr
L
read TV's owner's manual then set the resolution
that your TV
can
accept.
Notes:
S
V
C
T
HDMI mode must be set to OFF for VIDEO OUT
and S-VIDEO OUT and
Component
video
connections.
A
picture
via scart
input
is not
supported.
Caution
L
AUDIO
R
VIDEO OUT SELECTOR switch
In
power-off status,
select either
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Rear of DVD/CD Receiver
SCART signal of
depending on how
or
EURO AV TO TV terminal
to connect the unit to the TV.
7
Antenna Connections
Optional Equipment
Connections
1. Connect
Connect the
VCR to the AV IN connectors.
a
2. Connect the USB
player, etc.)
to
port of USB Memory (or MP3
the USB port on the front of the unit.
FM/AM antenna for
listening
to
IN
Connect the AM
Loop
antenna to the AM antenna
connector.
Connect the FM Wire antenna to the FM antenna
connector.
Rear of VCR
Front of DVD/CD Receiver
supplied
the radio.
OUT
Notes:
VID
AUDI
To
AUDIO
prevent noise pickup, keep the AM Loop antenna away
components.
from the DVD/CD Receiver and other
To AUDIO OUT
USB
Memory, MP3 Player (or
Memory Card Reader, etc.)
(L/R)/
Be
to fully extend the FM wire antenna.
connecting the FM Wire antenna, keep
horizontal as possible.
VIDEO OUT
To AV IN AUDIO
sure
After
(L/R)/
VIDEO
AUD O
R
AM
FM Wire
To Remove the USB Device from the unit
1. Choose
STOP
different function mode
a
twice in
(x)
or
Loop Antenna (supplied)
Antenna(supplied)
press the
a row.
2. Remove the USB device from the unit.
L
AUDIO
R
Notes:
Don't extract the USB device while
Music files
DivX files
This unit
(MP3/WMA), image
can be played.
can
not
files
operating.
(JPEG) and
USB HUB.
use a
Recommended
Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16, FAT32
Only use the memory cards recommended.
Devices which require additional program
-
-
installation when you have connected the unit to
computer
are
In
a
case
of
not
USB
HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive
supported. If there is an extention partition, it will
be supported.
If the drive of USB device is two
folder is
move
displayed
to the initial
on
menu
8
are
not
more, a drive
If you want to
after you select a folder,
the
or
screen.
press RETURN.
Digital cameras
supported.
a
supported.
and mobile
phones
are
not
it
as
Assembling and Connecting
the Speakers
The front and
speaker
rear
speakers
detached from the
stands. Connect the
assemble the front and
stands
are
as
rear
to
speaker
speakers
cords and
from
speaker
Speaker System Connection
Connect the
the
supplied speaker
To obtain the best
possible surround sound, adjust
speaker parameters (volume, distance, etc.).
the
illustrated.
1. Connect the
terminals
on
speaker
cords to the
appropriate
the bottom of each front and
rear
2. Attach the front and
by rotating
rear
the
speakers
to the
Front
speaker
(Left)
Front
speaker
(Right)
speaker.
stands
speakers using
cables.
speaker
screw.
Rear speaker
(Left surround)
Rear speaker
(Right surround)
Center
speaker
InstaliodSeup
Subwoofer
Notes:
Be
sure
to match the
appropriate
--
to
--.
terminal
If the cables
speaker
on
are
cable to the
the
components: + to + and
reversed, the sound will be
distorted and will lack base.
If you
use
front
rating, adjust
excessive
speakers
the volume
output
on
the
with low maximum
carefully to
speakers.
input
avoid
9
HDMI Connection
HDMI
TV
compatible
HDMI
If you have a HDMI TV or monitor, you can connect it
to this DVD/CD Receiver using a HDMI cable.
1. Connect the HDMI OUT
Receiver to the HDMI
TV
or
monitor
2. Set the TV's
jack on
jack on a
the DVD/CD
HDMI
compatible
(H).
H
source
to HDMI
(refer
to TV's Owner's
manual).
3. In
stop mode, select HDMI mode by pressing
HDMI. Press RESOL.
resolution you wish to
repeatedly
change.
to select the
L
AUDIO
R
Notes:
The
the cable connector
arrow on
body
should
face up for correct alignment with the connector
the DVD/CD Receiver.
If HDMI cable is not
not
on
connected, the HDMI button is
operated.
Resolution
You
setting
change the resolution for the COMPONENT
OUT by pressing RESOLUTION on the
control. Available resolution settings are as
can
VIDEO
remote
shown below.
OUTPUT
Available Resolution
CONNECTION
If there is noise
lines
or
on
the screen,
HDCP-compatible
1920
x
VIDEO OUT
1280
x
720
please
check the HDMI cable.
Not all
DVI devices will work
on
Tip
the screen,
noise appears
may be vibrated.
support HDCP,
picture
or
snow
:
1920
x
VIDEO OUT
1280
x
MONITOR OUT
S-VIDEO
When you
resolution
pressing
HDMI
connection, you can change the
(576p, 720p, 1080i) for the HDMI output by
use
RESOL.
on
SCART
Definition Multimedia
Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or DVI-equipped
TV.
Connection to
an
HDMI TV
while connection to
HDMI to DVI
or
a
requires an HDMI cable
DVI-equipped TV requires an
adaptor.
HDMI has the
enhanced,
capability to support standard,
high-definition video plus standard
to
multi-channel surround-sound
audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and
between the AV
connectors),
source
and communication
and AV devices such
as
HDMI, the HDMI logo and High-Definition Multimedia
Interface
10
x
720
1080i
x
1080i
720p
480p
1920
x
1280
x
1080i
720p
576p
720
x
x
576i
720
x
480i
x
576p
720
x
480p
720
x
576i
720
x
480i
720
x
576p
720
x
480p
720
x
576i
720
x
480i
720
x
576i
720
x
720
720
720p
480p
-
720p
and 1080i resolution
on
the
component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 576p(PAL) 480p(NTSC) resolution.
1080i, 720p, 576p and 480p does not work with the
analog video connections (MONITOR OUT &
S-VIDEO OUT).
The component (Y/Pb/Pr) will output to black
picture in the RGB mode.
If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read TV's owner's manual then set the
resolution that your TV
can
accept.
Caution:
DTVs.
HDMI
x
1280
Notes:
For
(High
1920
the remote control.
About HDMI
HDMI
x
NTSC
1080i
720p
576p
COMPONENT
with this DVD/CD Receiver.
If TV does not
PAL
HDMI
are
trademarks
licensing
LLC.
or
registered
trademarks of
Changing
the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it
on
again.
Displaying
Disc Information
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 11 to 14.
To
display
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
by pressing v / V and
setting by pressing b / B.
A second press of
screen.
item
select the
or
on
Settings
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
--
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
GENERAL OPERATION
--
Subtitle
Angle
Sound
--
--
--
Selected subtitle.
Selected
angle/total
number of
angles.
no
button is
screen
Press SETUP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
Selected sound mode.
pressed for a
display disappears.
few
seconds, the
Setup
menu
appears.
the current setting for the selected
alternate setting(s).
Note:
If
1.
item,
as
well
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
on-
or
PLAY to exit the
option
Setup
InstaliodSeup
as
then
menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Select
OSD
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
--
Refers to the
track
original language
the disc
was
Other
To select another
in which
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 24. If you enter the wrong language code,
--
buttons then ENTER to enter the
press CLEAR.
11
DISPLAY
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
Move
TV
Select
Aspect
4:3
Select when
--
16:9
Display
Display
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Mode
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
Panscan
on
Automatically displays
the entire
do not fit.
12
--
screen
the wide
and cuts off the
picture
portions that
AUDIO
5.1
Each DVD disc has
Set the receiver's
variety of audio output options.
AUDIO options according to the
a
type of audio system you
Press ENTER and 5.1
On
Speaker
Front L
0ms
Sync
Size
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
With the DVD* 1
Control
(DRC)
format, you
can
hear
a
program's
soundtrack in the most accurate and realistic
thanks to
audio
3.
Adjust options using
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
Select
Dolby Digital only
Return
Use b / B to select the desired
4.
effect.
Move
2.
presentation possible,
digital
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
*1:
menu
On
Vocal
Dynamic Range
Speaker Setup
AUDIO
Select
Speaker Setup
DRC
HD AV
for the built-in 5.1 channel
appears.
AUDIO
5.1
following settings
surround decoder.
1.
use.
Speaker Setup
Make the
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
InstaliodSeup
selection
Speaker
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
Since the
Sync
When
using Digital TV.
signal could not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
Sometimes AV
In the HD AV
to audio
Sync menu, you could adjust delay
signal for simultaneous AV signal
the
Dolby
Size
mix into normal stereo sound.
HD AV
speaker settings are prohibited by
Digital licensing agreement.
time
transmission
Delay time could be set up with 10msec unit.
(0 300msec)
Delay time is different with each TV Brand. So you
need to adjust optimal delay time complying with
change
speaker settings
settings.
fixed, you
are
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
Press b / B to
speaker. (You
same
time.
the Distance of the selected
adjust
adjust
can't
front / Woofer
speakers)
Test
~
your TV.
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
speaker. Adjust
signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
13
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
whose standards
area
used to rate the DVD video
disc, based
on
were
the list
on
page 24.
Select "Area Code"
1.
on
the LOCK
then
menu
press B.
Follow
2.
Move
step
2
as
shown
previous paragraph
(Rating).
Select
Select the first character
3.
using
Rating
Blocks
of rated DVDs based
playback
content. Not all discs
are
1. Select
the LOCK
"Rating"
on
on
Press B and select the second character
4.
their
v / V buttons.
using
v / V buttons.
rated.
menu
Press ENTER to confirm your Area code selection.
5.
then
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select
a
Rating
rating
from 1 to 8
using
PBC
On
DivX(R) Registration
Select
the v / V buttons.
Rating one (1) has the most
rating eight (8) is the least
1-8:
restrictions and
Select
Move
restrictive.
PBC
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Set
Playback
enter
Off: Video CDs with PBC
or
change password.
1. Select Password
2. Follow
step
2
as
on
the LOCK
shown above
then press B.
(Rating).
change the password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the
1.
2.
Press SETUP to
the
display
as
are
played
to
the
same
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R) Registration" option
then press B.
registration code will appear.
Use the registration code to purchase
clear it
using
the
Setup
rent the
www.divx.com/vod. Follow the instructions and
a
disc for
playback
on
this unit.
menu.
Input
6-digit number "210499" and press
ENTER. The password is cleared.
or
VOD service at
download the video onto
the
played according
Audio CDs.
videos from DivX
can
are
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
menu.
you
Off.
We
forget your password
If you forget your password,
following steps:
or
DivX(R) Registration
menu
To
If you
to On
the PBC.
way
can
(PBC)
On: Video CDs with PBC
selection, then
Password
You
Control
3.
Press ENTER to exit.
Note:
All the downloaded videos from DivX
be
14
played
back
on
this unit.
VOD
can
only
Operation
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
During playback,
Press X
SKIP
Discs
Operations
/
>)
tray.
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc, Video CD : 4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
press REPEAT
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
a
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
(AUDIO channel)
Press AUDIO
to hear
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
different audio channel
SLOW
Pause mode, press SLOW (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
15
Notes
general features:
on
If you press SKIP
(>)
Chapter (Track) playback,
Last Scene
once
the
during Repeat
repeat playback
This receiver memorizes last
that is viewed. The last
The A-B
on some
scene
scene
even if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
DVDs.
repeat function is available only in the
current title.
Note:
This receiver does not memorize the
switch off the receiver before
Additional features
System
Time Search
To start
at any chosen time
playing
on
1.
Press DISPLAY
Press v / V to select the time clock icon and
the
required
start time in
Playback
a
the
than 5 seconds to be able to
system does not coincide with
system of your TV, normal colour picture may
not be
NTSC:
displayed.
Select when DVD/CD Receiver is connected
with NTSC-TV.
starts from the
PAL:
selected time.
more
system (PAL, NTSC).
When the selected
hours, minutes, and
right.
Press ENTER to confirm.
disc if you
the disc.
Select
remote control for
select
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4.
a
play
appropriate system mode for your
system. If NO DISC appears in the display
window, press and hold P./STEP on the front panel or
"--:--:--" appears.
Input
of
to
TV
during playback.
seconds from left to
scene
commencing
You must select the
the disc:
2.
3.
from the last disc
remains in memory
the disc from the receiver or
cancels.
Zoom may not work
Memory
Select when DVD/CD Receiver is connected
with PAL-TV.
Marker Search
To enter
You
a
Marker
start
can
To enter
points.
desired
point
the TV
screen
a
on
the TV
Controlling
from up to nine memorized
marker, press MARKER at the
playback
the disc. The Marker icon appears
to enter up to nine
Your remote control is
Receiver
on
as
well
capable of operating your DVD/CD
limited functions of LG TV.
as
Follow the instructions below to
1.
markers.
Before
using
the remote
the device to be
To Recall
1.
or
Clear
During
disc
search
menu
a
Marked Scene
playback,
appears
2.
Within 10
3.
Press ENTER and
press SEARCH. The marker
on the screen.
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
can play any marker by
the marker search menu.
inputting
its number
different
2.
device),
The POWER
Screen Saver
Stop
16
appears when you leave the unit in
mode for about five minutes.
screen saver
be
sure
to select
(to operate
on
a
to press the TV first.
(TV), CHANNEL(E/D),
INPUT buttons
remote control
are
VOLUME
used to
(+/-),
and
operate the
LG TV.
Setting
Remote Control Codes for LG TV
Hold POWER
repeatedly
(TV)
and press CHANNEL(E/D) button
on or off.
until the TV
Note:
If the remote control does not
the other code
The
control, press the TV
operated.
To switch the remote control mode
seconds, press b / B to select
number that you want to recall or clear.
marked
operate for your LG TV.
briefly. Repeat
or use
operate your particular TV, try
the remote control originally supplied
with the LG TV.
Due to the
(LG and Gold Star)
variety of codes used by manufacturers,
COMPANY cannot
guarantee that the
operate every model of LG TV.
remote
OUR
control will
Playing
This unit
an
Audio CD
Audio CDs
play
can
or
or
MP3/WMA file
MP3/WMA files
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
recorded media.
Once you insert
CD,
MP3/WMA files recorded media
an
a menu
the TV
on
or
2.
0:00:00
0:00:00
Select
a
track
the
on
"List", then press PROG.
or
"
additional tracks
place
1/104
MP3
Program
disc.
(Add)" icon then press ENTER to place
the selected track on the "Program" list. Repeat to
1/12
List
a
select
functions. Refer to page 15.
Audio CD
Insert
Audio CD and MP3/WMA Discs:
screen.
appears
Press v / V to select a track/file then press PLAY or
ENTER and playback starts. You can use variable
playback
1.
contain 300 tracks.
can
program
MP3/ WMA/ Audio CD
Audio
Programmed Playback
JPEG
on
the list.
Program
List
Track1
Music Folder 1
Track2
Music Folder 2
Note:
Track3
Music Folder 3
Track4
Music Folder 4
Track5
Music Folder 5
Track6
You
Music Folder 6
Track7
Music Folder 8
Tips:
Press MENU to
move
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
MP3 / WMA disc
top of the
on
compatibility
menu
is
with this
4.
?
highlighted.
player
follows:
5.
-
a
an
MP3/WMA file
".mp3"
CD-R
?
If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
format should be ISO 9660
1.
playback MP3 / WMA files.We recommend that you
Easy-CD Creator, which creates an ISO 9660 file
use
names
must
?
They
incorporate
should not
a
2.
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
list have
resume
normal
played
in
once.
playback
from
programmed
(or
track of AUDIO CD
a
list and then press PLAY.
Tracks
Press REPEAT when
playing
Press REPEAT to select
?
a
disc. The
repeat
?
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
an
/ ?
"
*
:
<>letc.
?
To
?
should have
Playback begins
icon appears.
system.
File
ENTER to start.
Repeat Programmed
/ ".wma".
?
physical
or
playback,
MP3/WMA)
-
file extension other than
Press PLAY
select
-
The DVD/CD Receiver cannot read
icon
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
"Program"
is limited
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40
192kbps (WMA)
that has
?
( Add All)"
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
-
?
"
page.
to the next page.
On
?
add all tracks in the disc. Select
then press ENTER.
3.
as
can
Music Folder 7
Track8
The total number of files
on
the disc should be less than
Erasing
1.
requires
discs and
recordings
2.
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that
permission
is
required
in
Track from
"Program"
Operation
List
Use vVto select the track that you wish to
Program list.
erase
from the
999.
This DVD/CD Receiver
a
"
Press CLEAR.
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the
copyright
owner.
Note:
The programs
are
also cleared when the disc is removed.
17
Viewing
a
JPEG file
JPEG
JPEG disc
limited
with this
player
is
This unit
Before
can play discs with JPEG files.
playing JPEG recordings, read the
Recordings on right.
compatibility
follows:
as
JPEG
1.
Insert
disc and close the
a
The PHOTO
menu
notes
on
?
on
see an on-screen
the TV
screen.
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
PHOTO
as
Preview
List
upon the size and number of JPEG
a long time for the DVD/CD
Receiver to read the disc's contents. If you don't
display after several minutes,
tray.
appears
Depending
files, it could take
---
2760
x
2048
pixels
and burn another disc.
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
The total number of files and folders
on
the disc
should be less than 999.
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
?
JPEG Folder 8
?
2.
Press v / V to select
folder, and press ENTER.
a
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder
previous
remote to
3.
list,
use
the v / V buttons
on
viewing a file, you can press STOP
previous menu (JPEG menu).
to
move
to the
Note:
When
viewing
a
JPEG
file, the resolution is changed 480p if
the resolution set to 1080i. You
720p
or
can
change
the resolution for
480p.
Tips:
There
>
four Slide
are
(Slow),
>>
Use v /V /b
to select the
If you set
:
Speed options
(Normal), >>> (Fast) and II (off).
/B to highlight the Speed. Then, use b / B
option you want to use then press ENTER.
Speed option
to
Off, Slide is
not active.
Slide Show
Use vVbBto
press
highlight the
(Slide Show)
ENTER.(You can not change resolution)
then
Still Picture
1.
Press PAUSE/STEP
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
Moving
press
or
>)
once
while
or
viewing a
previous file.
picture
Press b / B
18
(.
to advance to the next
To rotate
picture
or
again.
to another File
Press SKIP
picture
show, press PLAY
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
?
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
Ensure that all the selected files have the
extensions when
the
and press ENTER.
highlight
Some discs may be incompatible due to a
different recording format or the condition of disc.
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
Explorer.
or
as
into the CD
shown
as
JPEG
image
files in
Playing
this DVD/CD Receiver you
Using
1.
DivX Movie file
a
Insert
disc and close the
a
on
appears
the TV
can
play
DivX disc
as
DivX disc.
tray. The MOVIE
menu
?
compatibility
?
MOVIE
player
is limited
Available resolution size of the DivX file is under
800x600
screen.
with this
follows:
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
45 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 3
Movie Folder 4
Movie Folder 5
"
"
_
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the
per 1
2.
Press v / V to select
v / V buttons
the remote to
on
list,
use
not
over
30
operate
?I f the video and audio structure of recorded
file is not
the
interleaved, either video
or
audio is
outputted.
and
highlight
frame is
normally.
folder, and press ENTER.
A list of files in the folder appears. If you are in a
a
file list and want to return to the Folder
screen
second, this unit may
press ENTER.
3.
If you want to view
v / V to
4.
highlight
particular file, press
file and press ENTER
a
a
Playable
or
PLAY.
".avi
DivX file
", ".mpg ", ".mpeg ", ".divx"
Press STOP to exit.
Notice for
displaying
If the subtitle does not
display properly during playback,
displayed properly
Tips:
Press MENU to
On
move
Playable
to the next page.
?
MP3/WMA, JPEG and MOVIE file,
can
switch
MUSIC, PHOTO and MOVIE menu.
you
Press TITLE and MUSIC, PHOTO and MOVIE
a
word
CD with
on
top of the
menu
is
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
?
the Divx subtitle
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
is
?
highlighted.
"MP43
Playable
"AC3
?
Notes:
Be
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Audio format
Operation
", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
-
sure
pressing
DivX file
to select "SUBTITLE ON" mode
by
playing
the subtitle file every time before
?
a
-
-
.
When the subtile has
the
Codec format
"DIVX3.xx
more
than two
languages
in
file, original subtile is only available.
The DivX files in your memory card
can
not be
played.
You
not adjust sound mode and
during the DivX file playing.
can
sound
VIRTUAL
19
DVD Audio Discs
DVD Audio is
success
disc format
building
provide high quality,
a new
of DVD to
Moving
multi-channel audio for
on
Some DVD Audio discs divide content into different
the
uncompressed,
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
a new
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
the disc itself.
DVD Audio
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
to another GROUP
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
used for
music, either Advanced Resolution multi-
quality that is closer to the artist's
recording or for longer recordings. Many DVD
on-screen
text, such
as
a
or
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
Note:
channel sound
Audio discs contain
Press 1/2
3.
on
Sometimes the author of the disc creates hidden
DVD Audio disc contains up to seven times
capacity of a CD. This additional space is
master
Group
can
the data
typical
during playback
artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
content that
can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
control isn't dictated by your DVD/CD Receiver
it is
---
a
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Note:
To
enjoy
of DVD
maximum sound
Audio, you
must
quality
use
output (5.1CH AUDIO OUT jacks
Receiver).
and surround effect
5.1 channel
on
analog
audio
the DVD/CD
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
available
20
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
on-screen
some
the Radio Stations
Presetting
You
preset
can
Before
tuning,
50 stations for FM and AM
make
sure
Preset radio stations in the DVD/CD Receiver's
(MW).
that you have turned down
the volume.
(MW)
on
the remote control until FM
appears in the
display
AM
or
display
Press and hold
about two seconds
until the
starts to
TUN.(-/+) for
frequency indication
Scanning stops
when the DVD/CD Receiver tunes in
a
or
AM
(MW)
repeatedly
control to select the
appears in the
the remote
on
preset station you
want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
change,
station.
3.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
Press PROG/MEMO
A
the
window.
Press PRESET +/-
2.
then release.
4.
on
The last received station is tuned in.
BAND, FM and AM
(MW) changes alternately.
3.
radio stations"
(see "Presetting
Press BAND until FM
1.
window.
And then every time you press
2.
memory first
left).
Press BAND
1.
to the Radio
Listening
on
the remote control.
To turn off the radio
preset number will flash in the display window.
Press POWER to turn the DVD/CD Receiver off
Press PRESET +/-
5.
the
on
preset number you
Press PROG/MEMO
6.
the remote control to select
want.
on
the remote control
again.
Repeat steps
To listen to
For manual
3 to 6 to store other stations.
or
a
station with
Press
TUN.(-/+) repeatedly
station manually.
a
in
weak
step
signal
Press and hold PROG/MEMO for about two seconds
in the
again,
display
window
the stations
are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
change
to normal mode.
2.
TUN.(-/+) repeatedly.
tuning,
preset radio station directly
the number buttons
on
the remote
press 1 then 9
a
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
in the
on
on
seconds).
noisy
the front
display
panel
so
that "ST."
window. There will be
no
effect, but the reception will improve. Press
again
to restore the stereo effect.
To
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
step
preset radio station directly.
For example, to listen to preset station 4, press 4
the remote control. To listen to preset station 19,
the button
Note:
To
a
can use
control to select
To clear all the stored stations
appeared
in
3 to tune in the
To select
and then press PROG/MEMO
cleared.
press
tuning
press and hold TUN.(-/+) for
about two seconds on the front panel.
You
and "ERASE ALL" is
automatic
tuning,
For automatic
To tune in
or
(DVD/CD, AUX, USB).
non-preset radio stations
Use manual
The station is stored.
7.
select another function mode
the
preset number, follow the steps
improve reception
Reorient the supplied antennas.
a
5-6
as
above.
21
RDS
Programme Search (PTY)
Operation
A
This unit is
which
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
use
in many countries, RDS is a
station call signs or network
transmitting
description of
system for
information,
indicate the
a
indicate each PTY
RDS TUNING
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
and the RDS indicator will
sign
Window
as
well
as
light
in the
Display
indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
a
sign
station is first tuned. In normal
will indicate the station
display
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data
types in the sequence:
FREQUENCY
(PS
PS
(Programme
PTY
RT
Service
CT)
The
name)Display Window.
channel is shown in the
name
with
along
an
of the
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
Music
EASY M
Easy Listening
LIGHT M
Light
CLASSICS
Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
PHONE IN
Phone-In
Travel and
LEISURE
Leisure and
RT
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
of
A "text" message contains special
information from the broadcast station. Note that
(Radiotext)-
this message may scroll
permit
CT
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables
the unit to receive the actual time and show it in
the
Display
Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
the
NONE, RT NONE,
Touring
2.
Hobby
Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
You may search for a specific
by following these steps:
1.
Music
Music
TRAVEL
(Programme type recognition)- The name
type is shown in the Display
Message
Broadcast Information
Programme Type (PTY)
Press BAND to select FM mode.
Press PTY
on
the remote
show the last PTY in
3.
Press PTY
4.
When the PTY is
control, the display will
use.
repeatedly
to select
a
desired PTY.
selected, press TUN.(-/+).The
unit will go into an automatic search mode.
station is tuned, the search will stop.
22
of the
Speech Programme
the programme
Window.
PTY
explanation
PTY.
the correct time.
a
ability to encode
Programme Type (PTY) codes that
type of material being broadcast. The
list shows the abbreviations used to
following
station programme type text message
about the station or specifics of musical selection and
When
benefit of RDS is its
major
broadcasts with
When
a
Sleep
You
can
Timer
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
at
automatically
specified
a
The SLEEP indicator and
display
sleep
sleep
XTS ON
window.
The
unique
XTS ON
When
playing the movie with the
relatively to the general music, it
can
check the time
remaining
before the DVD/CD
sense
Receiver turns off.
Press SLEEP. The
remaining
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
display effect by playing the sound source
rear speakers same as the front speakers.
The XTS
temporarily
disabled when
changing
changing it to
from
2.1
NORMAL
XTS-P and XTS mode tune off
mute your unit in
VIRTUAL sound
order, for example,
to
the telephone, "MUTE" indicator flashes in the
window.
plug ( 3.5mm)
The
speakers are automatically disabled
plug in headphones (not supplied).
Selecting input
can use
VCRs
or
supplied
operation.
Press AUX
select the
repeatedly on the remote
desired input source.
with the unit
:
(L/R)
& VIDEO IN Connectors.
for
selecting
TV-AUDIO: for
the
analog signal
selecting
signal
from SCART.
input source by pressing
front panel.
Press and hold down this button about 3
repeatedly
to select
Multichannel sound
a
5.1 ch feel 10.1
provides
a
emotion
which you are involved with sound and you
feel detailed sound.
You
the
then press
VIRTUAL
can
Sound Mode
the TV audio
also select the
the
5.1 ch
ch sound therefore this mode
from AV2 AUDIO IN
Note
on
Effect
3D STEREO
The Multichannel sound makes
one
FUNC. button
Display
VIRTUAL
Multichannel sound
control to
Each time you press this button, the mode of the
function changes in the following sequence:
AUX
Source
2.1 ch.
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
source
the
VIRTUAL sound.
3D STEREO
other units connected to the AV
on
setting
into the
when you
IN. Refer to the Owner's Manual
for further information
press VIRTUAL the
Jack
Using Headphone
Connect a stereo headphone
PHONES connector.
can
via the
CH.
repeatedly.
Press MUTE to mute your unit.
display
mode is
2.1 CH to 5.1 CH and it is enabled when
Mute
answer
of sound at woofer for you to satisfy with.
BYPASS, It creates the high
Note
Dimmer
can
weak bass sound
enforces the
In the mode of 2 CH
time appears in the
window.
display
You
XTS-P ON...
creates the
Note:
You
→
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
SLEEP180→150→120→90→80→70→60→50→40→
You
NORMAL
→
XTS-P ON
30→20→10→OFF
You
in
time.
time appears in the
Each time you press SLEEP the
changes in the following order.
2.
setting changes
the
Press SLEEP to set the desired
1.
Each time you press XTS pro the
following order.
time.
input
seconds,
source.
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to. (2 ch. sound only)
can
of the
BYPASS
ON STAGE
STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
→
→
→
→
→
PL ll MUSIC
→
→
→
HALL
→
PL ll MTRX
→
BYPASS...
Note:
Initial sound mode is BYPASS
23
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
24
code from this list.
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
Insert
is
?
picture.
a
disc.
(Check
securely
into the
that the DVD or,
audio CD indicator in the DVD
does not work.
No
service.
The TV is not set to receive DVD
signal
?
Select the
mode
output.
display
lit.)
appropriate
the TV
on
so
video
the
input
picture from
the DVD/CD Receiver appears
TV screen.
?
The video cable is not connected
?
no
sound
or
The connected TV power is turned off.
?T
?
The
?
a
connected with the
equipment
not connected
are
?
is
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting
does not start
cable is
damaged.
dirty.
poor.
The DVD/CD Receiver
mode of the
Connect the audio cable into the
The power of the equipment connected
with the audio cable is turned off.
?
input
so
jacks securely.
securely.
playback picture
Select the correct
you can hear the
sound from the DVD/CD Receiver.
signal output.
The audio cables
the TV.
urn on
audio receiver
audio cable is not set to receive DVD
?
The
Connect the video cable into the
?
very low-level
sound is heard.
only
the
urn on
equipment
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
is
?
An
the
jacks securely.
securely.
There is
on
unplayable
disc is inserted.
?
or
display
lit.)
Insert
disc
a
playable
disc.
the
(Check
type, colour system and Regional
code.)
?
?
The disc is
placed upside
The disc is not
placed
?
down.
Place the disc with the
within the
guide.
?
Place the disc
The disc is
?Amenu
is
?
dirty.
on
the TV
?
screen.
The
Rating
level is set.
?
heard.
or
noise is
?
The disc is
?
The
?
dirty.
speakers and components
poorly.
are
?
The DVD/CD Receiver is located too
close to the TV.
tray
guide.
menu screen.
Cancel the
rating
Rating
function
or
change
level.
Clean the disc.
Connect the
speakers
and
components securely.
connected
?
the disc
Press the SETUP button to turn off
the
Loud hum
side
Clean the disc.
the
?
on
inside the
correctly
?
playback
down.
?
Move your TV away from the audio
components.
25
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?T
?
une
in the station
Preset the stations
manually.
(page 21).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
?
properly.
The remote control is not
remote
does not work
?
sensor
pointed
at the
?
of the DVD/CD Receiver.
The remote control is too far from the
?
DVD/CD Receiver.
?
There is
an
Point the remote control at the remote
sensor
Use the remote control within about 23
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(7 m).
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The front
display
26
panel
is too dim.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
Specifications
Power
Genral
Refer to main label
Net
3.9
kg
430
x
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
AM
[MW]
Amplifer
mm
5°C to
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL
35°C, Operation
625/50,
More than 75 dB
(1 kHz,
NOP -6
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV)
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1
output
87.5
-
108.0 MHz
or
65.0
-
74.0
MHz,
87.5
60 dB
140
108.0 MHz
522
(Mono)
8,000 Hz
-
1,620 kHz
-
or
520
-
1,720 kHz
450 kHz
100W
Surround mode
Front: 100W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 100W
Inputs
Outputs
AV IN
+
100W
(Rated Output Power 100W, 4Ω at 1 kHz, THD
100W (Rated Output Power 100W, THD
+
Surround*: 100W
+
Type
Impedance
Frequency Response
2
Way
Center
Speaker
80
-
Rated
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
(1m)
100 W
200 W
300x1350x300mm
5.35kg
to
change
speaker
%)
%)
V)
Passive Subwoofer
Way
3
Speaker
(LHS-76IAW)
1
1
Way
4Ω
18,000 Hz
86 dB/W
1.0
(LHS-76IAC)
2
4Ω
Sound Pressure Level
10
(Rated Output Power 100W, 4Ω at 1 kHz, THD 10 %)
(Rated Output Power 150W, 3Ω at 30 Hz, THD 10 %)
Speaker
3
10
100W
Subwoofer*: 200W
S-VIDEO, MONITOR, PHONES: (32 Ω,
subject
-
10.7 MHz
Stereo mode
are
LPF/A-Filter)
1.0 V
output
specifications
20 kHz
dB,
0.5 %
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
and
nm
More than 70 dB
(LHS-76IAS)
Designs
650
laser, wavelength
NTSC 525/60
150 Hz to 18 kHz
Front/Rear
Speakrs
status: Horizontal
5% to 85%
COMPONENT VIDEO OUT
FM
295
x
Temperature:
S-video
Video
57
Operating
Operating humidity
Video
Tuner
Refer to main label
supply
consumption
Weight
Power
80
-
18,000 Hz
86 dB/W
(1m)
100 W
200 W
500x160x155mm
1.73kg
Speaker
3Ω
40
-
1,500 Hz
82 dB/W
(1m)
200 W
400 W
240x450x390mm
10.5kg
without notice.
27
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
the
provide
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
guarantee does
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 0870 873 5454
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RT0005D
Download PDF

advertising