LG | LH-T6345D | LG LH-T6345D Owner’s Manual

LH-T6345D JA4ULLS_ENG
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T6345
(Main Unit: LH-T6345D,
Speakers: LHS-T6345T, LHS-T6345W)
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO THE BACK COVER OF THIS
MANUAL.
POWER: This DVD/CD receiver operates
of 220V-240V~,50/60Hz.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
mains
WIRING: This DVD/CD receiver is
supplied with a BSI
approved 13 amp mains plug, with a 13 or 5 amp
fuse. When replacing the fuse always use a 13 or 5
amp BS 1362, BSI or ASTA approved type. Never use
this plug without the fuse cover. To obtain a
replacement fuse cover contact your dealer or "LG
Electronics U.K.Ltd." If the type of plug supplied is not
1363
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on a
supply
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
suitable for the mains sockets in your home, then the
plug should be removed and a suitable type fitted.
Please refer to the
an
shock to persons.
wiring
WARNING: A mains
instructions below:
removed from the mains lead
plug
of this DVD/CD receiver must be
destroyed.
A mains
with bared wires is hazardous if inserted in
plug
a
mains socket.
Do not connect either wire to the earth
The exclamation mark within
an
equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the instructions
accompanying the product.
the letter E
or
with the earth
green or green and yellow.
If any other plug is fitted, use
in the
plug,
or
pin,
symbol
13
a
or
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
in accordance with the
-
or
coloured
5 amp fuse, either
at the distribution board.
IMPORTANT: The wires in this mains lead
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
marked with
following
are
coloured
codes:
BLUE: NEUTRAL, BROWN: LIVE
-
As the colours of
the wires in the mains lead of this DVD/CD receiver
not correspond with
indentifying the terminals in
may
WARNING: Do not install this equipment in
such as a book case or similar unit.
a
confined space
follows: The wire which
the
coloured
marking
your plug, proceed as
is coloured blue must be
connected to the terminal which is marked with the
letter N
or
coloured black. The wire which is coloured
brown must be connected to the terminal which is
marked with the letter L
coloured red.
ON COPYRIGHTS:
CAUTION:
This DVD/CD receiver
employs
a
Laser
It is forbidden
System.
To
ensure proper use of this product, please read this
owner's manual carefully and retain it for future reference.
Should the unit
service location
require maintenance, contact
(see service procedure).
an
authorized
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous
other than those
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
or
vases, should be
placed
on
the apparatus.
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures of
these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
of this unit. This number is
unique
available to others. You should record
This
product
is manufactured to
with the
comply
requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
radio interference
73/23/EEC.
2
here and retain this
guide
as a
on
the back
to this unit and not
requested information
permanent record of your
purchase.
Model No.
Serial No.
___________________________________
___________________________________
Contents
Introduction.....................4-9
CHANGINGTHEAUDIOCHANNEL
.
.
.
.
.
.
.
.20
SymbolusedinthisManual...............4
AbouttheSymbolDisplay.............4
STILL PICTURE AND FRAME-BY-FRAME
NotesonDiscs.........................4
SLOWSCAN...........................21
HANDLINGDISCS.......................4
REPEATA-B...........................21
PLAYBACK.............................21
STORINGDISCS.........................4
REPEAT...............................21
CLEANINGDISCS........................4
TIMESEARCH..........................21
TypesofPlayableDiscs..................5
ZOOM..............................22
REGIONALCODE........................5
MARKERSEARCH....................22
Disc-relatedterms......................6
FrontPanel............................7
SpecialDVDFeatures..................22
DisplayWindow.........................7
RemoteControl.........................8
REMOTE CONTROL OPERATION RANGE
.
.
.
.
.8
PAUSE................................22
CHECKING THE CONTENTS OF DVD
DISCS:MENUS.........................22
TITLEMENU..........................22
.8
DISCMENU...........................22
RearPanel............................9
CAMERAANGLE.......................22
REMOTE CONTROL BATTERY INSTALLATION
CHANGINGTHEAUDIOLANGUAGE.
InstallationandSetup.
.
.
.
.
.
.
.
.
.10-19
.
TVConnections.......................10
ExternalEquipmentConnection
.
.
.
.
.
.
.
.
.
.
.11
.
.
.
.
.
.
.
.
.22
SUBTITLES...........................22
Playing an Audio CD or MP3/WMA Disc
Audio CD and MP3 / WMA Disc Features
.
.
.
.
.
.
.
.23
.24
AerialConnections......................11
PAUSE................................24
SpeakerSystemConnection..............12
SpeakerPositioning....................13
Mini Glossary for Audio Stream &
MOVINGTOANOTHERTRACK............24
SurroundMode........................14
SoundMode..........................14
ProgrammedPlayback.................25
On-ScreenDisplay.....................15
PLAYBACK STATUS/RESTRICTIONS
.
.
.
.
.
.
.
.15
REPEATTRACK/ALL/OFF.................24
SEARCH.............................24
REPEATPROGRAMMEDTRACKS
.
.
.
.
.
.
ERASING A TRACK FROM PROGRAM LIST
.
.
.
.
ERASING THE COMPLETE PROGRAM LIST
.
.25
.25
.25
InitialSettings......................16-19
ViewingaJPEGDisc...................26
GENERALOPERATION...................16
SLIDESHOW..........................26
LANGUAGE............................16
STILLPICTURE.........................26
?OSD...............................16
MOVINGTOANOTHERFILE..............26
?DiscAudio/Subtitle/Menu.............16
TOROTATEPICTURE....................26
DISPLAY...............................16
MaintenanceandService................27
?TVAspect..........................16
?DisplayMode........................16
PlayingaDivXMovieDisc...............28
AUDIO................................17
AdditionalFeatures.....................29
?5.1SpeakerSetup.....................17
.17
?DynamicRangeControl(DRC)
SYSTEMSELECT.......................29
?Vocal..............................17
SLEEPTIMERSETTING..................29
.
.
.
.
.
.
.
.
.
LOCK(ParentalControl)..................17
?Rating.............................17
?Password(SecurityCode)...............18
?CountryCode........................18
HANDLINGTHEUNIT....................27
LASTSCENEMEMORY...................29
DIMMER...............................29
MUTE.................................29
OTHERS..............................18
.30
PresettingtheRadioStations
ListeningtotheRadio...................30
RDSOperation........................31
?PBC...............................18
RDSTUNING...........................31
.
.
.
.
.
.
.
.
.
.
.
.
?DivX(R)Registration...................18
RDSDISPLAYOPTIONS..................31
5.1SpeakerSetup.....................19
ProgrammeSearch(PTY)................31
SPEAKERSETUP.......................19
?Speaker............................19
?Size................................19
?Volume.............................19
?Distance............................19
?Test...............................19
Reference....................32-35
LanguageCodes.......................32
CountryCodes........................32
Troubleshooting.....................33-34
Specifications.........................35
Operation.....................20-31
PlayingaDVDorVideoCD
.
.
.
.
.
.
.
.
.
.
.20-22
PLAYBACKSETUP....................20
GeneralFeatures......................20
MOVINGTOANOTHERTITLE.............20
MOVING TO ANOTHER CHAPTER/TRACK
.
.
.
.20
SEARCH...............................20
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
reference.
This manual
About the
"
"
Symbol Display
may appear on your TV display during
and indicates that the function explained in
operation
provides
information
on
the
operation
and maintenance of your DVD/CD receiver. Should
require service, contact an authorized service
this owner's manual is not available
on
that
specific
DVD video disc.
the unit
location.
Notes
Symbol
Used in this Manual
The
lightning
symbol alerts you to the
presence of dangerous voltage within the
enclosure that may constitute
a
Discs
HANDLING DISCS
flash
product
on
risk of
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
STORING DISCS
After
Note:
Indicates
special
notes and
operating
features.
tips
and hints for
A section whose title has
is
applicable only
symbol.
4
making
of the
following symbols
represented by the
one
to the disc
the task easier.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
store the disc in its case. Do not expose
leave it in
a
sunlight or sources of heat and never
parked car exposed to direct sunlight.
CLEANING DISCS
Tip:
Indicates
playing,
the disc to direct
DivX Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Types
of
Playable
Discs
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
plays
DivX file, DVD -R, DVD +R,
REGIONAL CODE
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
This DVD/CD receiver is
and/or JPEG files.
encoded DVD software. This unit
manufactured for
play only
designed and
playback of region "2"
DVD discs labeled "2"
2
can
or
"ALL".
Notes:
?
?
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Do not
use
shaped
or
Notes
?
on
Regional
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
with
on
the
one or more
cover.
This
number must match your DVD/CD receiver's
regional code or the disc cannot play.
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
designed by the software
playback features may
some
not be available or other functions may be added.
Manufactured under license from
"Dolby",
"Pro
Logic",
Dolby
trademarks of
Unpublished
Dolby Laboratories.
symbol are
and the double-D
Laboratories. Confidential
works.
Laboratories. All
Copyright 1992-1997 Dolby
rights reserved.
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide patents issued and pending. "DTS" and
"DTS Digital Surround" are registered trademarks of
Digital
Digital
Theater
Theater
Systems,
Systems,
Inc.
Copyright 1996, 2003
rights reserved.
Inc. All
5
Disc-related terms
PBC:
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
as
sided recordable
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
Title
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
A title is
VCD
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
stereo sound.
quality
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
a
popular compression format used for digital
yields very high near-CD quality.
audio files that
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
JPEG
Joint Pictures
Expert Group. JPEG is a compressed
save images with no limit
file format that allows you to
on the number of colors.
interview in
series. Each
as a scene
in
a
is
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
or one
a
Scene
On
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
DivX is the
of
name
which is based
on
a
the
revolutionary
new
using
new
MPEG-4
standard for video.You will be able
and still
Track
A distinct element of audiovisual information, such
as
the
DivX
6
film
moving pictures
WMA
movies
Chapter (DVD video discs only)
chapter is a segment of a title such
A
may not be recorded.
MP3
MP3 is
be title 2, and cast interviews could be title 3. Each
assigned a reference number enabling you to
locate it easily.
title is
video codec
compression
to play DivX
this DVD/CD receiver.
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video
of audio.
(with multiple angles)
and several tracks
Front Panel
VOLUME Control
Press "v" to increase volume
or
press
"V" to decrease the volume.
TUNING
(-/+)/SKIP/SCAN
MEMORY/STOP
MONO/STEREO/PAUSE/STEP
FUNCTION/PLAY
Press and hold down this button about 3 seconds,
then press repeatedly to select other function.
DISC
Tray
OPEN/CLOSE
STANDBY indicator
Lights
red when the receiver is in
Standby
(off).
mode
DISPLAY Window
STANDBY/ON
Display
Remote
sensor
Window
Indicates current audio
RDS Data type
stream
indicators
TUNED indicator
Indicates current
surround mode
STEREO indicator
Repeat playback
SLEEP indicator
mode indicators
MUTE indicator
D RPT ALL
PL II PROG
MUTE
RDS
PTY
TUNED
RT
STEREO
SLEEP
PCM
TITLE
CHPTRK
Indicates
current
title
Programmed
playback active
number
Indicates current
chapter
or
track
number
Total
playing time/Elapsed time/Frequency/
Sleep time/Surround mode/Volume etc.
Indicates current
player function:
Playback, Pause,
etc.
indicators
7
Remote Control
POWER
OPEN/CLOSE
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
on
NUMBER
the front
SLEEP
panel.
(p. 29)
SUBTITLE
AUDIO
(p. 22)
(p. 14)
SETUP (p. 16)
(p. 22)
RETURN
(p. 20, 26)
DISPLAY
(p. 15)
SOUND
ENTER
ARROW
For
use
selection
in
highlighting
on a
GUI
a
TITLE
(p. 22)
Use the TITLE button to
menu
screen, TITLE and MENU
the title
display
on
screen.
MENU (p. 22)
Use the MENU button to
display the menu screen
included on DVD video
discs.
included
screen
DVD video discs.
SLOW SCAN
(Q
/
R)
(p. 21)
VOLUME
(+/-)
PRESET(+/-) (p. 30)
SKIP/SCAN
STOP
PAUSE/STEP
MUTE
PLAY
MARKER(p.
(p.
ANGLE (p.
ZOOM (p.
SEARCH
(
/
) (p. 20)
(p. 29)
PROGRAM
(p. 25)
(p. 21)
REPEAT (p. 21, 24)
REPEAT A-B (p. 21)
CLEAR
22)
22)
22)
22)
DIMMER
(p. 29)
RDS
PTY
(p. 31)
PTY (p. 31)
SEARCH (p. 31)
REMOTE CONTROL OPERATION RANGE
Point the remote control at the remote
press the buttons.
Distance: About 20 ft
sensor
REMOTE CONTROL BATTERY INSTALLATION
and
Remove the
(6 m)
from the front of the
R03
cover on
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
the
rear
of the remote control, and insert two
with
and
About 30° in each direction in front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Rear Panel
POWER CORD
FM Antenna Connector
SPEAKER Connectors
AUXILIARY INPUT Connectors
Introducin
AUX IN
66
8
666
S-VIDEO OUT MONITOR OUT
S-VIDEO OUT Connector
MONITOR OUT Connector
AM
Do not touch the inner
permanent damage
pins
of the
jacks
on
the
rear
panel.
Loop
Electrostatic
Antenna Connectors
discharge
may
cause
to the unit.
9
Installation and
Setup
TV Connections
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
Tips:
?
Depending
on
your TV and other
equipment
you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use
one
of the connections
described below.
?
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
Caution
--
Make
sure
the DVD/CD Receiver is connected
to the TV. Select the correct AV
--
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
protection system.
Rear of TV
Video connection
S-VIDEO
SCART INPUT
Connect the MONITOR OUT
Receiver to the VIDEO IN
video cable
jack
jack on
VIDEO
INPUT
AUDIO INPUT
INPUT
from the DVD/CD
L
the TV
using
R
L
the
supplied (V).
V
S
S-Video connection
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
S-Video cable
jack on the DVD/CD
jack on the TV using
the
VIDEO Cable
(S).
T
Tip:
Rear of DVD/CD receiver
SCART-RCA
Adaptor
If you want to connect the DVD/CD receiver to a TV
with SCART socket, use the SCART-RCA adapter (T).
AUX IN
S-V
TV/MONITOR
OOUT MON
ROUT
(SCART type)
Rear of DVD/CD receiver
10
External
Equipment Connections
Connection
Rear of VCR
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
(or
LD
player, etc)
Connect the AUX IN
AUDIO OUTPUT
VIDEO
OUTPUT
R
L
Tip:
Press AUX
these
on
the remote control to select
input
to
jacks.
AUX appears
on
the
Display
Window.
AUX IN
S-
Aerial Connections
Connect the
supplied
FM/AM aerial for
InstaliodSeup
DEO OUT MONITOR OUT
AM
listening
Loop aerial
(supplied)
to the
radio.
Connect the AM
loop
aerial to the AM aerial
connector.
Connect he FM wire aerial to the FM aerial
connector.
Notes:
?To
?
?
prevent noise pickup, keep the AM loop aerial away from
the DVD/CD receiver and other components.
Be sure to fully extend the FM wire aerial.
After
connecting the
possible.
FM wire
aerial, keep it
as
horizontal
as
FM Wire aerial
(supplied)
AUX IN
S-VIDEO OUT MONITOR OUT
11
Speaker System Connection
Connect the
the
speakers using
To obtain the best
possible
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Front
speaker
(Right)
Front
Center
speaker
(Left)
speaker
AUX IN
66
8
666
S-VIDEO OUT MONITOR OUT
Rear speaker
(Right surround)
Rear speaker
(Left surround)
Subwoofer
Notes:
?
Be
sure
to match the
speaker cable
to the
appropriate terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
use
speakers.
12
front
speakers
with low maximum
input rating, adjust the volume carefully
to avoid excessive
output
on
the
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2 rear
speakers
and
subwoofer).
If you want to
subwoofer.
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
?
?
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
equal
same
distance. And
height.
But
by hearing position
normally place
it above
or
set up the
below the
television.
?
Rear
speakers
right
Place left and
behind the
for surround sound
playback.
position
speakers
wall
listening
These
area.
speakers
recreate sound motion and
InstaliodSeup
atmosphere required
For best results, do not install the rear speakers too far behind the listening
and install them at or above the level of the listener's ears. It is also effective to direct the rear
In the
towards
case
of
a
other, and set the
?
a
smaller
rear
or
ceiling
room
to further
disperse
size, if the audience is
speakers
above 60
-
90
cm
the sound.
near
to the rear wall set the rear
than the listener's
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
13
Mini
Glossary
for Audio Stream
& Surround Mode
Sound Mode
You
can
one
of the
enjoy surround sound simply by selecting
pre-programmed sound fields according
to
the program you want to listen to.
Allows you to
enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of
transparent audio(which means identical to the original
masters) and results in exceptional clarity throughout a true
360 degree sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
Each time you press SOUND button, the sound mode
changed in the following order;
is
BYPASS
→
THEATER 1
STUDIO
→
→
CLUB
CHURCH
→
→
HALL
→
PLII MOVIE
...
(This function available 2-channel mode only)
When DVD is inserted.
You
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you can
program source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
"
Use this mode when
effect of
being
effect with
DOLBY
an
in
a
"
LOGIC
which
clearer and
more
Dolby Digital
can
or
2 channel
The
effect
of
or
position in
dynamic than before.
used.
Each time you press AUDIO button, the sound mode of DVD
changed as the following order;
is
→→
For your reference
?
II creates five full-bandwidth
This is done
using
output channels
an advanced,
BYPASS
14
to the way it was recorded.
signals
is
played
for each
source individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
You
-
-
-
tonal colorations.
Software with multichannel surround audio
The DVD/CD receiver memorizes the last mode
settings
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
according
the
the
image, as well as
the sound image, is much
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
on
only be obtained through
movement of the sound
sources.
(Dolby Digital,
during playback.
Although the DVD contents differ from disc to disc, the
following explains the basic operation when this feature is
provides the
(II)
from two-channel
DVD
remote
?
Dolby Pro Logic
change the sound mode of
live concert house-an
SURROUND.
of fixed
sense
or
mark. This mode
movie theatre
intensity
PRO
front/back/left/right
the
playing movie
"
which carries the
"
can
DTS, PRO LOGIC, etc) by pressing the AUDIO button
can
On-Screen
You
the
use
the
Some items
screen.
To
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
Display
Example: On-Screen Display during
playing DVD
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
1.
Press DISPLAY
2.
Press v / V to select
during playback.
The selected item is
Chapter
item.
an
highlighted.
change the setting. You can also
the number buttons if appropriate (e.g.
use
inputting
the title
number).
For
press ENTER to execute the
some
1/12
functions,
0:20:09
Output
b/Bor
AUDIO
mode
setting.
Subtitle
language
?
Some discs may not
shown below.
If
no
provide
all of the features
button is
pressed for 10 seconds,
display disappears.
screen
the
on-
PLAYBACK STATUS/RESTRICTIONS
Title
A-B
#1
123
1/9
Angle
Sound
ABC
Repeat
Repeat
sequence
Items
Enter
Marker
Track Number
Marker Search
menu
SUBTITLE
Action
play
from this
prohibited
or
ANGLE
BYPASS
b/B
Selection Method
1/3
0:20:09
B, Numbers
Numbers
ENTER
b/Bor
Audio Channel
Sound
b /
ENTER
point
not available
InstaliodSeup
b/Bor
1/3
(or PBC mode)
Time search
Resume
b/Bor
1 ENG
Example: On-Screen Display during
playing VCD
title
a
B, Numbers
Numbers, ENTER
Audio language
and Digital Audio
Notes:
?
b /
ENTER
Time search
Press b / B to
3.
Number
AUDIO
BYPASS
b/B
15
Initial
LANGUAGE
Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 16 to 19.
To
display
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SET UP to
display
the
menu.
SET UP will take you back to initial
A second press of
screen.
Move
To go to the next level:
Press B on the remote control.
OSD
To go back to the previous level:
Press b on the remote control.
display.
Select
language
a
for the
Setup
Disc Audio / Subtitle / Menu
GENERAL OPERATION
menu
Select
and
DVD
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
1.
Press SET UP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
disc
3.
Use v / V to select the second desired
press B to move to the third level.
buttons then ENTER to enter the
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SET UP
or
Setup
menu
appears.
PLAY to exit the
option
Setup
on-screen
then
Refers to the
Original:
was
original language
track
in which the
recorded.
Other: To select another
language, press number
corresponding 4-digit
number according to the language code list on page 32.
If you enter the wrong language code, press CLEAR.
DISPLAY
menu.
DISPLAY
TV
16:9
Aspect
Display
Mode
Widescreen
Move
TV
DVD
Aspect
4:3: Select when
a
16:9: Select when
Display
Display
Select
Mode
Mode
standard 4:3 TV is connected.
16:9 wide TV is connected.
a
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
entire
16
Automatically displays the wide picture on
and cuts off the portions that do not fit.
screen
the
AUDIO
LOCK
Each DVD disc has
(Parental Control)
LOCK
Set the receiver's
variety of audio output options.
AUDIO options according to the
a
type of audio system you
Unlock
Rating
****
Password
use.
Country
Code
GB
AUDIO
5.1
Select
Speaker Setup
DRC
On
Vocal
On
Move
DVD
Rating
Some movies contain
Move
DVD
5.1
Select
DivX
Speaker Setup
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "5.1 Speaker Setup", page 19.)
Select
for children to view.
Control
country. Some discs offer
more
suitable
InstaliodSeup
scenes as an
alternative.
The
parental
control feature allows you to block
to scenes below the
rating you input, thereby
your children from being able to view
material you believe is unsuitable.
(DRC)
preventing
DVD
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
access
Dynamic Range
Select
1. Select
"Rating"
on
the LOCK
menu
then
press B.
2. To access the
Rating,
Password and
Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you
are
prompted
to do so.
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
DVD
3. Select
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
a
rating
from 1 to 8
using
the v / V buttons.
multi-channel karaoke
mix into normal stereo sound.
on
the disc will
Rating
1-8:
Rating one (1) has the most
rating eight (8) is the least
restrictions and
restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the receiver, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SET UP to exit the menu.
selection, then
17
Password
You
(Security Code)
enter or
can
PBC
change password.
Set
1. Select "Password" on the LOCK menu then press
B.
2. Follow
3. Enter the
it
Input
2 as shown left
step
"New" is
(Rating). "Change"
or
highlighted.
new
again
VCD
Playback Control (PBC)
On: Video CDs with PBC
are
played according
are
played
to the PBC.
Off: Video CDs with PBC
way
as
DivX(R) Registration
You
can
show the DivX DRM
can
clear it
1.
Press SETUP to
2.
Input the 6-digit number "210499" and the
code is cleared.
3.
Enter
the
display
code
as
(Digital Right
code for your unit
only.
Code
If you forget your security code you
the following steps:
a new
same
DivX
Management) Registration
forget your Security
the
Audio CDs.
then press ENTER.
4-digit code,
verify.
to
4. Press SETUP to exit the menu.
If you
to On or Off.
Setup
using
menu.
security
described above.
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
The
Note:
When
"
"
INPUT PASSWD
appears
on
the TV
screen, press STOP and then press SET UP to move
to the setup menu.
Country
DVD
Code
Enter the code of the
country/area whose standards
used to rate the DVD video disc, based on the
list on page 32.
were
1.
Select
"Country Code"
on
the LOCK
menu
encrypt
an
move
file.
Notes:
If you rent the DivX VOD file, it has several
limits as show below.
?
Display
the number which you
then
press B.
2.
Follow step 2
3.
Select the first character
4.
as
shown left
(Rating).
using
v / V buttons.
Press ENTER and select the second character
v / V buttons.
using
5.
?
Press ENTER to confirm your country code
selection.
The rental has been
expired.
OTHERS
The PBC and
DivX(R) Registration settings
changed.
be
?
OTHERS
PBC
On
DivX(R) Registration
Select
Move
18
can
Select
options
viewing
Display
the authorization
error.
can
watch the file.
of
5.1
Speaker Setup
This
to
chapter includes important reference
help you set your DVD/CD receiver.
information
If you connected speakers to your DVD/CD receiver,
the Distance lets the speakers know how far
setting
SPEAKER SETUP
Make the
Distance
for the built-in 5.1 channel
following settings
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
surround decoder.
Press b / B to
Press SETUP. The setup
2.
Use v / V to select the AUDIO
3.
menu
appears.
option
then press
to the second level.
move
Use v / V to select the
press B to
move
Note:
Yo u
Speaker Setup option
adjust the Distance of Center speaker
speakes (Left & Right) only.
c an
Rear
Speaker Setup
menu
signals
→
AUDIO
of each
the volume to match the volume of test
memorized in the system.
Front Left (L)
Center
appears.
Rear
Right (R)
→
→
Front
Rear Left
(L)
speaker. Adjust
signals
Right (R)
→
→
SubWoofer
Front L
Speaker
Size
Small
Volume
0
dB
Distance
2
m
Test
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
InstaliodSeup
Test
Press b / B to test the
Press ENTER and 5.1
and
then
to the third level. "Select" is
highlighted.
4.
time.
speaker.
1.
B to
adjust
same
the Distance of the selected
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
Speaker
Select a speaker that you want to adjust. (Front
speakers (Left), Front speakers (Right), Center
Speaker, SubWoofer, Rear speakers (Left), or Rear
speakers (Right))
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
+5dB)
level of the selected
~
19
Operation
Playing
a
DVD
or
Video CD
General Features
Note:
PLAYBACK SETUP
Unless stated otherwise, all
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
1.
playback
2.
side down.
operations
When
press PLAY.
another title. Press DISPLAY while
some cases,
the disc
menu
might
appear
instead:
a
stopped
B to
You
disc has
more
can
than
one
title, you
to
can move
playback is
appropriate number (0-9) or use
then the
move
playback
Use the bBvVbuttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or MENU to return to the menu
use
MOVING TO ANOTHER TITLE
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
In
described
the remote control. Some features may also be
available on the Setup menu.
b /
to another title.
play any title by inputting
is stopped.
its number while
MOVING TO ANOTHER CHAPTER/TRACK
screen.
When
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen.
Menu
settings
and
operating
another
?
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
procedures
Off
(See "PBC"
on
page
18).
on a
more
disc has
than
one
chapter/track
more
than
track, you
as
one
chapter
can move
or a
to
follows:
Press SKIP .
or > briefly during playback
chapter/track or to return to the
the current chapter/track.
to
beginning
?
of
Press SKIP . twice
briefly
to
step back
to the
previous chapter/track.
If
parental control is set and the disc is not within
rating settings you must input the password.
(See "LOCK" on page 17).
the
?
title
select the next
Notes:
?
a
disc has
?To go
to any chapter during DVD playback,
DISPLAY
and press v / V to select the
press
chapter/track icon. Then, input the chapter/track
DVDs may have a region code. Your receiver does
play discs that have a region code different from
directly
numberoruseb/B.
not
your receiver. The
(two).
region
code for this receiver is 2
SEARCH
1.
Press and hold SKIP/SCAN .
two seconds
The receiver will
2.
now
> for about
go into SEARCH mode.
Press and hold SKIP/SCAN .
repeatedly
or
during playback.
to select the
DVD; X2, X4, X8, X16
or
>
required speed:
or
X100
Video CD, DivX disc; X2, X4, X8, X16
3.
To exit SEARCH mode, press PLAY.
CHANGING THE AUDIO CHANNEL
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
different audio channel
20
a
STILL PICTURE AND FRAME-BY-FRAME
PLAYBACK
REPEAT
You
play
can
a
Press REPEAT
1.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
repeat mode.
DVD Video Discs
?
?
2.
title/chapter/all/track on a disc.
during playback to select a desired
To exit still motion mode, press PLAY.
?
SLOW SCAN
Chapter: repeats
-
Repeat Chapter/Title/Off
chapter.
the current
Title: repeats the current title.
Off : does not play repeatedly.
Video CDs, DivX discs Repeat Track/All/Off
Track : repeats the current track
-
?
1.
PressSLOWSCAN-morM+during
playback.
?
?
The DVD/CD Receiver will enter SLOW mode.
2.
UsetheSLOWSCAN-morM+toselectthe
required speed: t 1/2, t 1/4, t 1/8, t 1/16
(backward), or T 1/2, T 1/4, T 1/8, T 1/16
(forward).
Video CD, the Slow speed changes: T
1/2, T 1/4, T 1/8, or T 1/16 (forward).
With
3.
(N).
playback
in
reverse
is not
possible
To repeat
a
3.
2.
Press REPEAT A-B at your chosen starting
briefly on the TV screen.
again
disc.
at any chosen time on the disc:
Press DISPLAY
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon
and "-:--:--" appears.
Input
the
required
start time in
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
sequence.
Press REPEAT A-B
playing
seconds from left to
point.
"A-" appears
on a
play repeatedly.
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
box shows the
2.
REPEAT A-B
does not
TIME SEARCH
with
Video CDs.
1.
?
1.
Slow motion
:
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 18).
To start
Note:
repeats all the tracks
:
Off
Notes:
?
a
To exit Slow Motion mode, press PLAY
All
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
at your chosen end
point.
"A-B" appears
briefly
on
the TV
screen
repeat sequence begins.
3.
Press REPEAT A-B
again
and the
Note:
?
to cancel.
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the Time Search function (See "PBC"
on page 18).
21
ZOOM
Use
to
zoom
enlarge
Press ZOOM
1.
DVD Features
Special
the video
image.
during playback
or
still
playback
to
CHECKING THE CONTENTS OF DVD
DISCS: MENUS
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size
400% size
special
2.
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
→
→
800% size →1600% size
Use the bBvVbuttons to
3.
zoomed
→
through
MENU.
the
Input
corresponding
number
or use
the
bBvVbuttons to highlight your selection.
Then press ENTER.
100% size
move
DVDs may offer menus that allow you to access
features. To use the disc menu, press DVD
the
picture.
TITLE MENU
Note:
?
Zoom may not work
on some
MARKER SEARCH
To enter
You
a
playback
To enter
desired
point
the TV
screen
from up to nine memorized
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
or
1.
During
disc
search
menu
2.
3.
Clear
a
appears
Press ENTER and
scene.
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
can play any marker by
the marker search menu.
inputting
the
as camera
options,
angles,
and
DISC MENU
MENU
press SEARCH. The marker
on the screen.
playback
subtitle
a menu,
Otherwise, the disc
offers features such
Press MENU and the disc
Within 10 seconds, press b / B to select
number that you want to recall or clear.
marked
may appear.
screen.
Press TITLE to exit.
3.
Marked Scene
playback,
menu
menu
on
on
markers.
To Recall
appears
spoken language and
chapters for the title.
marker, press MARKER at the
a
the
menu
The
2.
Marker
start
can
points.
Press TITLE. If the current title has
1.
DVDs.
its number
again
menu
is
displayed.
Press
to exit.
CAMERA ANGLE
If the disc contains
scenes
recorded at different
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
Tip:
The
PAUSE
1.
2.
Press PAUSE/STEP
To return to
angle indicator
will blink
recorded at different
during playback.
playback,
press PLAY.
angles
on
the TV
as an
screen
during scenes
angle
indication that
switching is possible.
CHANGING THE AUDIO LANGUAGE
Press AUDIO
different audio
repeatedly during playback
language or audio track.
to hear a
SUBTITLES
Press S-TITLE
repeatedly during playback
languages.
to see the
different subtitle
Notes:
?
?
The subtitle file of the DivX file is
and sub.
If there is no information or there is a code that
1/1
read in the DivX file,
etc are displayed.
"
22
displayed only smi,
"
can
srt
not
Playing
an
Audio CD
or
MP3/WMA
Disc
The DVD/CD receiver
recordings
on
MP3/WMA formatted
play
can
CD-ROM, CD-R,
or
CD-RW discs.
MP3 / WMA disc
limited
?
Audio CD
as
?
?
?
List
Program
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
?
?
MP3 / WMA
?
Press v / V to select
a
folder, and press ENTER
to see the folder contents.
-
-
creates an ISO 9660 file
system.
File
a
names
or
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
on
achieve
Program
List
requires
are
There
are
3-Music3
6-Music6
7-Music7
Customers should note that
Tip:
file list
return to the Folder
the MP3/WMA
on
list,
use
menu
the v / V to
and want to
and
highlight
press ENTER.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MP3/WMA
or
JPEG word
use
top of the
menu
b / B to select MP3/WMA
or
is
highlighted. Then
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
On
on
Operation
many different types of recordable disc
(including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
5-Music5
a
recordings
formats
4-Music4
in
discs and
optimal playback quality. Pre-recorded
automatically set to these standards.
DVDs
1-Music1
2-Music2
are
the disc should be
less than 999.
This DVD/CD receiver
MP3 / WMA
?
incorporate
an
to meet certain technical standards in order to
1/104
0:00:00
They
should have
?T he total number of files
Press v / V to select a track then press PLAY
ENTER. Playback starts.
If you
is
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
and must
?
player
-
1/12
0:00:00
Audio CD
2.
with this
-
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
1.
compatibility
follows:
always
be
sought
from the
copyright
owner.
JPEG then press ENTER.
23
Audio CD and MP3 / WMA Disc
Features
SEARCH
PAUSE
Press PAUSE/STEP
1.
2.
To return to
1.
during playback.
playback, press PLAY,
again.
ENTER
Press and hold SKIP/SCAN .
two seconds
or
press PAUSE/STEP
The receiver will
2.
MOVING TO ANOTHER TRACK
Press SKIP
1.
(.
or
>) briefly during playback
beginning
to go to the next track or to return to the
of the current track.
Press SKIP . twice
2.
3.
previous
track.
You
play
can
any track
to go back to the
briefly
by inputting
its number.
REPEAT TRACK/ALL/OFF
You
1.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The repeat
icon appears.
2.
Press REPEAT to select
?
?
?
24
a
desired repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on a disc.
Off(No display):
does not
play repeatedly.
> for about
go into SEARCH mode.
to select the
X8 backward
3.
now
Press and hold SKIP/SCAN .
repeatedly
or
during playback.
or
or
>
required speed: X2, X4,
forward.
To exit SEARCH mode, press PLAY.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program
1.
contain 300 tracks.
can
Insert
REPEAT PROGRAMMED TRACKS
1.
disc.
a
Audio CD
or
AUDIO CD
Press REPEAT when
or
2.
MP3/WMA Discs:
MP3/WMA
menu
appears.
Press REPEAT to select
?
?
1/12
0:00:00
playing
a
disc. The repeat
icon appears.
0:00:00
Audio CD
1/104
MP3 / WMA
JPEG
?
List
List
Program
Track1
Track8
Music Folder 1
Track2
Track3
Music Folder 2
Track3
Track12
Music Folder 3
Track4
Track7
Music Folder 4
Track5
Track6
Music Folder 5
Track6
Track9
Track7
Track1
Track8
Track10
Program
a
desired repeat mode.
TRACK: repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
ERASING A TRACK FROM "PROGRAM"
LIST
Music Folder 6
Music Folder 7
Music Folder 8
1.
Use vVto select the track that you wish to
Program list.
erase
from the
Audio CD Menu
MP3/WMA Menu
2.
2.
Select
or
a
track
"
on
the "List", then press PROGRAM
Program
icon then press ENTER to
the selected track on the "Program" list.
select
place
Repeat
to
(Add)"
place
additional tracks
on
can
4.
"
(Add All)"
icon
ENTER to start.
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
5.
LIST
Use v / V to select
"Program"
list have
To
normal
played
on
"
(Del all)",
then press
Operation
ENTER.
Select the track you want to start playing on the
"Program" list. Press and hold v / V to move to
the next/previous page.
or
to erase additional tracks on
ERASING THE COMPLETE PROGRAM
add all tracks in the disc. Select
Press PLAY
Repeat
the list.
then press ENTER.
3.
list.
the list.
Note:
You
"
Press CLEAR. Or, select
(Delete)" icon then
press ENTER to place the selected track on the
Note:
in
The programs
are
also cleared when the disc is removed.
the
once.
playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
resume
25
Viewing
a
JPEG Disc
Press
this DVD/CD receiver you can view Kodak
PICTURE CDs and discs with JPEG files.
Using
1.
Insert
a
appears
disc and close the tray. The JPEG
on the TV screen.
b / B
picture
JPEG disc
?
Preview
JPEG Folder 2
JPEG Folder 4
JPEG Folder 6
Depending
2048
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder list,
the v / V buttons
use
on
?
?
the
viewing a file, you can press STOP
previous menu (JPEG menu).
or
PLAY.
?
to move
?
four Slide
:
Speed options
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
are
Use vVbBto
to
highlight
the
(Slide Show)
then
JPEG
Press PAUSE/STEP
The Receiver will
during
now
slide show.
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
MOVING TO ANOTHER FILE
Press SKIP
26
(.
or
>)
once
while
to advance to the next or
or
press
JPEG
viewing a
previous file.
on
the disc
Some discs may be incompatible due to a
recording format or the condition of disc.
Ensure that all the selected files have the
copying
If the files have
".jpe"
please
them
File
rename
names
without
the files
Windows
JPEG
STILL PICTURE
picture
The total number of files and folders
though
press ENTER.
2.
and burn another disc.
able to be read
SLIDE SHOW
1.
pixels
extensions when
Tip:
?
---
different
and press ENTER.
highlight
If you want to view a particular file, press
v / V to highlight a file and press ENTER
There
upon the size and number of JPEG
a long time for the DVD/CD
should be less than 999.
?
?
with this receiver is
of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
JPEG Folder 8
to the
compatibility
follows:
some
JPEG Folder 7
While
as
see an on-screen
JPEG Folder 5
3.
to rotate the
receiver to read the disc's contents. If you don't
display after several minutes,
JPEG Folder 3
remote to
picture
a
counter clockwise.
files, it could take
JPEG Folder 1
previous
or
menu
JPEG
2.
during showing
clockwise
limited
List
JPEG
TO ROTATE PICTURE
by
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD receiver. Even
are
Explorer.
or
as
into the CD
shown
as
JPEG
image
files in
Maintenance and Service
Refer to the information in this
contacting
a
chapter
before
shipping
Please
the
save
or
the unit
original shipping
carton and
packing
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
use.
contact your nearest authorized
service center.
factory.
the exterior surfaces clean
Keeping
?
a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the
the Unit
The DVD/CD receiver is
HANDLING THE UNIT
When
Maintaining
service technician.
Do not
use
near
spray
volatile
liquids
such
as
insecticide
the unit.
?D o not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
To clean the
surfaces
are
moistened
Do not
or
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
27
Playing
a
DivX Movie Disc
DivX disc
Using
1.
this DVD/CD receiver you
can
play
a
player
is limited
?Available resolution size of the DivX file is under
menu
720x576
?
0:00:00
with this
DivX disc.
disc and close the tray. The DivX
appears on the TV screen.
Insert
compatibility
follows:
as
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
20~40characters
1/12
by
(different by language).
DIVX
?
List
If there is
Movie Folder 1
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 2
Movie Folder 3
"
"
_
display.
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2.
Press v / V to select
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons on the remote to
?
If the file is recorded with
supports
3.
4.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
*
or
PLAY.
or
audio is
outputted.
and
highlight
press ENTER.
If the video and audio structure of recorded
file is not interleaved, either video
some
of
1-point
GMC, the
unit
of the record level.
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
are different levels of GMC encoding, usually
Press STOP to exit.
There
called
Notes:
?
Be
sure
DivX file
?
to select "SUBTITLE ON" mode before
by pressing
playback
more
than two
languages
in the
file,
original subtile is only available.
?
The Pro
logic
II Sound mode is not available for DivX file.
or
3-point GMC.
a
ENTER every time.
When the subtile has
1-point, 2-point,
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz
?
-
within 24
?
Bit
40
28
48kHz
(WMA)
rate: within 32 320kbps (MP3),
192kbps (WMA)
-
-
-
(MP3),
Additional Features
SLEEP TIMER SETTING
LAST SCENE MEMORY
You
can
set the DVD/CD Receiver to turn off
at a specified time.
automatically
This receiver memorizes last
scene
from the last disc
scene
if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
even
Press SLEEP to set the desired
1.
remains in memory
the disc from the receiver or
that is viewed. The last
The SLEEP indicator and
sleep
time.
sleep time appears
in the
display window.
Each time you press SLEEP the
in the following order.
2.
setting
changes
Note:
SLEEP180→150→120→90→80→70→60→50→40→
This receiver does not memorize the
switch off the receiver before
commencing
30→20→10→OFF
disc if you
to play the disc.
of
scene
a
Note:
?
SYSTEM SELECT
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP
panel
or
on
a
system (PAL, NTSC,
or
AUTO).
When the selected system does not coincide with
picture may
the system of your TV, normal colour
not be displayed.
AUTO:
Select when DVD/CD Receiver is connected
with Multi
NTSC:
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
the front
remote control for more than 5 seconds to be
able to select
You
DIMMER
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
repeatedly.
MUTE
Press MUTE to mute your unit.
can mute your unit in order, for example, to
answer the telephone, "MUTE" indicator flashes in the
display window.
You
Select when DVD/CD Receiver is connected
with PAL-TV.
29
the Radio Stations
Presetting
You
tuning,
make
sure
that you have turned down
the volume.
(MW)
memory first
on
the remote control until FM
appears in the
display
AM
or
display
on
the
Press and hold TUNING
the front
or
on
starts to
then
change,
3.
release.
or
FM appears in the
Press PRESET +/-
repeatedly
the remote
on
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
for about two seconds until the
panel
frequency indication
(MW)
window.
The last received station is tuned in.
2.
(MW) changes alternately.
3.
Press BAND until AM
1.
window.
And then every time you press BAND, FM and AM
2.
radio stations"
(see "Presetting
left).
Press BAND
1.
to the Radio
Preset radio stations in the DVD/CD Receiver's
preset 50 stations for FM and AM (MW).
can
Before
Listening
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
Scanning stops when the DVD/CD Receiver tunes in a
station. "TUNED" and "ST." (for stereo program) appear
in the display window.
Press MEMO./STOP
4.
A
on
Press TUNING
5.
panel
display
the front
on
the front
select another function mode
window.
preset number you
on
Press POWER to turn the DVD/CD receiver off
panel.
or
to select the
Press MEMO./STOP
6.
the front
preset number will flash in the
To turn off the radio
want.
For manual
The station is stored.
7.
Repeat steps
on
3 to 6 to store other stations.
or
automatic
tuning,
a
station with
Press TUNING
a
weak
For automatic
repeatedly
or
3 to tune in the station
front
signal
in
tuning
in
step
2.
or
panel repeatedly.
press and hold TUNING
tuning,
for about two seconds
on
the
panel.
step
To select
manually.
You
To clear all the stored stations
a
can use
preset radio station directly
the number buttons
control to select
Press and hold MEMO./STOP for about two seconds
and "CLEAR ALL" is
or
AUX).
press TUNING
the front
or
To tune in
or
To listen to non-preset radio stations
Use manual
panel again.
(CD/DVD
appeared
in the
display
and then press MEMO./STOP
again,
the stations
window
are
on
the remote
preset radio station directly.
For example, to listen to preset station 4, press 4
the remote control. To listen to preset station 19,
press 1 then 9
a
(within
3
on
seconds).
cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "CLEAR ALL"
change
display
will go off
by
itself and
to normal mode.
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
disappears
display window.
There will be no stereo effect, but the reception
improve. Press the button again to restore the
"STEREO"
on
the front
in the
stereo effect.
Note:
If all stations have
been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To
change
above.
30
already
the preset number, follow the steps 5-6
as
To
improve reception
supplied antennas.
Reorient the
will
RDS
Programme Search (PTY)
Operation
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
This unit is
which
Now in
use
in many countries, RDS is
a
system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS TUNING
When
a
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
sign
Window
and the RDS indicator will
well
as
as
light
in the
Display
indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS system is capable of transmitting a wide
of information in addition to the initial call sign
variety
that appears when
RDS operation the
a
station is first tuned. In normal
display
will indicate the station
name, broadcast network or call letters.
Pressing RDS
through
the remote control enables you to cycle
the various data types in the sequence:
on
FREQUENCY
(PS
PTY
RT
CT)
PS
(Programme Service name)- The name
channel is shown in the Display Window.
of the
A
major
benefit of RDS is its
ability
to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to
indicate each PTY along with an explanation of the
PTY.
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
Speech Programme
Music
Music
LIGHT M
Light
CLASSICS
Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
Music
Programmes
Programmes
Programmes
RELIGION
Religious
Broadcasts
PHONE IN
Phone-In
Programmes
TRAVEL
Travel and
Window.
LEISURE
Leisure and
RT
JAZZ
Jazz Music
COUNTRY
Country
PTY
the
(Programme type recognition)- The name
programme type is shown in the Display
of
(Radiotext)- A "text" message contains special
information from the broadcast station. Note that
this message may scroll
permit
CT
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables
the unit to receive the actual time and show it in
the
Display
Window.
Note:
Some RDS stations may not choose to include
of these additional features. If the data
Touring
Hobby
Music
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
Message
Broadcast Information
some
required
for the selected mode is not
being
transmitted, the Display Window will show a PTY
NONE, RT NONE, CT NONE, PS NONE message.
You may search for a specific Programme
(PTY) by following these steps:
1.
2.
Type
Press BAND to select FM mode.
Press PTY
on
the remote control, the
will show the last PTY in
display
use.
3.
Press PTY
4.
When the PTY is selected, press PTY SEARCH.
repeatedly
to select a desired PTY.
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
31
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Galician
7176
7771
Somali
8379
Ameharic
6577
Georgian
7565
7783
Spanish
6983
Arabic
6582
German
6869
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
Greek
6976
Maltese
7784
Swahili
8387
Assamese
6583
Greenlandic
7576
Maori
7773
Swedish
8386
Azerbaijani
6590
Guarani
7178
Marathi
7782
8476
Bashkir
6665
Gujarati
7185
Moldavian
7779
Tagalog
Tajik
Basque
Bengali; Bangla
6985
Hausa
7265
Mongolian
7778
Tamil
8465
6678
Hebrew
7387
Nauru
7865
Tatar
8484
Bhutani
6890
Hindi
7273
7869
Telugu
8469
Bihari
6672
Hungarian
7285
7879
Thai
8472
Breton
6682
Icelandic
7383
7982
Tibetan
6679
Bulgarian
6671
Indonesian
7378
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Burmese
7789
Interlingua
7365
Pashto, Pushto
8083
Tigrinya
Tonga
Byelorussian
6669
Irish
7165
Persian
7065
Turkish
8482
Cambodian
7577
Italian
7384
Polish
8076
Turkmen
8475
Catalan
6765
Japanese
7465
Portuguese
8084
Twi
8487
Chinese
9072
Javanese
7487
Quechua
8185
Ukrainian
8575
Corsican
6779
Kannada
7578
Rhaeto-Romance
8277
Urdu
8582
Croatian
7282
Kashmiri
7583
Rumanian
8279
Uzbek
8590
Czech
6783
Kazakh
7575
Russian
8285
Vietnamese
8673
Danish
6865
Kirghiz
7589
Samoan
8377
Volapuk
8679
Dutch
7876
Korean
7579
Sanskrit
8365
Welsh
6789
English
Esperanto
6978
Kurdish
7585
Scots Gaelic
7168
Wolof
8779
6979
Laothian
7679
Serbian
8382
Xhosa
8872
Estonian
6984
Latin
7665
Serbo-Croatian
8372
Yiddish
7473
Faroese
7079
Latvian, Lettish
7686
Shona
8378
Yoruba
8979
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
32
following
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
PY
Czech Republic
Denmark
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
TR
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power is on, but
the DVD/CD Receiver
?
The power cord is disconnected.
?
No disc is inserted.
?
The TV is not set to receive DVD
?
Plug the power cord
wall outlet.
?
picture.
signal
output.
?T he video cable is not connected
lit.)
There is
no
sound
or
?
very low-level
sound is heard.
only
a
The connected TV power is turned off.
equipment connected with the
audio cable is not set to receive DVD
The
?T urn
?
signal output.
?
The audio cables
not connected
are
?
?
The
playback picture
is
?
The power of the equipment connected
with the audio cable is turned off.
The audio
connecting
The disc is
?
?
cable is
damaged.
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
Connect the audio cable into the
?T urn
on the equipment connected
with the audio cable.
?
?
dirty.
poor.
The DVD/CD Receiver
does not start playback.
on
jacks securely.
securely.
?
screen.
Connect the video cable into the
jacks securely.
securely.
?
into the
Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV
?
securely
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is
does not work.
No
service.
No disc is inserted.
?
An
?
unplayable
disc is inserted.
Replace
it with
new one.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
?
The disc is
placed upside
?T h edisc is not
placed
down.
within the
?
guide.
?
Place the disc with the
down.
playback
side
Place the disc on the disc tray
inside the guide.
correctly
?
The disc is
?Amenu is
?
The
?
dirty.
on
Rating
the TV
?
screen.
level is set.
?
Clean the disc.
Press the SET UP button to turn off
the menu screen.
Cancel the Rating function
rating level.
or
change
the
Loud hum
heard.
or
noise is
?
?
?
The disc is
?
dirty.
The speakers and components
connected poorly.
are
The DVD/CD Receiver is located too
close to the TV.
?
Clean the disc.
Connect the
speakers
and
components securely.
?
Move your TV away from the audio
components.
33
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
Correction
positioned
or
connected
poorly.
?
?
?
The signal strength of the stations is too
weak (when tuning in with automatic
Connect the antenna
securely.
Adjust the antennas and connect
external antenna if necessary.
?T une in the station
an
manually.
tuning).
?
No stations have been preset
or
preset
?
Preset the stations
(page 30).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
?T he remote control is not
properly.
pointed
at the
?P oint the remote control at the remote
remote sensor of the DVD/CD Receiver.
does not work
?
The remote control is too far from the
sensor
?
DVD/CD Receiver.
?
?
The front panel
display is too dim.
34
?
There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
The batteries in the remote control
flat.
Nothing
display.
is
displayed
on
the front
are
panel
?
?
?
of the DVD/CD Receiver.
Use the remote control within about 20
ft (6 m).
Remove the obstacle.
Replace
the batteries with
Press DIMMER
on
new ones.
the remote control.
Specifications
Power
Power
Refer to main label
supply
consumption
Refer to main label
Mass
Gen ral
External dimensions
CD/ VD
(W
x
H
x
D)
Tuner
AM
[MW]
75
x
314
mm
Laser
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL 625/50, NTSC 525/60
to
35°C, Operation
status: Horizontal
5% to 85%
wavelength
650
nm
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 70 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
(p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
1.0 V
108.0 MHz
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
-
or
65.0
-
74.0 MHz, 87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Surround mode
Amplifer
x
Temperature: 5°C
S-video output
FM
kg
360
Operating conditions
Operating humidity
Video output
Video
3.8
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
+
Subwoofer*: 60W
25W
(8Ω
(6Ω
at 70
kHz, THD 10 %)
Hz, THD 10 %)
at 1
MONITOR
Satellite
Speakrs
Suplied Acesori
Designs
1
Type
Impedance
Frequency Response
130
1
Way
(1m)
25W
H
x
D)
Speaker
50
-
1,500 Hz
82 dB/W
(1m)
60W
50W
120W
89x89x90mm
170x350x333mm
0.4
?Speakers......................6
1
8Ω
20,000 Hz
-
85 dB/W
Rated
x
Passive Subwoofer
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Way
Speaker
Speaker
1
kg
4.3
kg
?Remotecontrol.................1
?Speakercables.....................5
?Batteries(AAA).....................2
?AMloopantenna................1
?FMantenna.......................1
and
specifications
are
subject
to
change
without notice.
35
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
services in order to
following
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the guarantee to the
B.
The dealer is not
made to the apparatus,
apparatus is removed, defaced, misused,
C.
or
altered.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
original purchaser.
to carry out service under guarantee if unauthorized modifications are
or if non standard components are used or if the serial number of the
obliged
Aerial
or worn
alignment
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
MODEL NO.*
To obtain information
*
Please
complete
SERIAL NO.*
or
assistance:
for your
own
Call 0870 607 5544
DATE OF PURCHASE.*
Monday-Friday 9.00am-4.30pm
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
LGEUK Website
(
service website
P/NO: 3834RH0057W
:
:
www.lge.co.uk
www.lgelectronics.co.uk )
Download PDF

advertising