LG | LH-W360SE | LG LH-W360SE Owner’s Manual

LH-W3600SE_JA4ULLD_ENG_138M
WIRELESS DVD
RECEIVER SYSTEM
MODEL: LH-W360SE
(Main Unit: LH-W360
Speakers: LHS-36SES, LHS-36SEW
ACC36R, ACC36T)
R
USB
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
CAUTION
CAUTION
Most
a
single
a
be
they
placed
upon
circuit;
outlet circuit which powers only that
no additional outlets or branch
and has
circuits. Check the
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
is,
appliance
the Power Cord
recommend
appliances
dedicated
That
CAUTION: TO REDUCE THE RISK
concerning
page of this owner's
specification
manual to be certain.
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
Do not overload wall outlets. Overloaded wall
REFER SERVICING TO QUALIFIED SERVICE
loose
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
damaged
or
power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock
triangle
point
within
an
is intended to alert the
the
product.
with
use
an
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
LASER PRODUKT
KLASS 1
LASER APPARAT
PRODUIT
plug
amp mains
Never
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION:
product employs
a
is
easily
System.
product, please
ensure proper use of this
read this
owner's manual carefully and retain it for future reference.
Should the unit
require maintenance,
contact
an
authorized
service center.
Use of
controls, adjustments
procedures
other than those
or the performance of
specified herein may result
in
beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
(dripping
as
vases,
should not be
to water
apparatus
exposed
splashing) and no objects filled with liquids,
should be placed on the apparatus.
or
on a
mains
supply
of
200-240V,
such
supplied
with
a
BSI 1363
13
approved
fused at 5 amp. When replacing the fuse
5 amp BS 1362, BSI or ASTA approved type.
plug,
use a
this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of
plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type
fitted. Please refer to the wiring instructions below:
use
this DVD
player
plug removed from the mains lead of
destroyed. A mains plug with bared
must be
wires is hazardous if inserted in
a
mains socket.
Do not connect either wire to the earth
letter E
or
with the earth
green and yellow.
If any other plug is
plug,
hazardous radiation exposure.
To prevent direct exposure to laser
CAUTION: The
accessible.
operates
WARNING: A mains
Laser
To
mechanical
appliance.
WIRING: This unit is
LASER
always
This
or
50/60Hz.
LUOKAN 1 LASER LAITE
CLASSE 1
physical
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
POWER: This unit
LASER PRODUCT
exact
Protect the power cord from
that the
KLASSE 1
unplug
appliance, and have the cord
replacement part by an
of the
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
CLASS 1
Periodically
to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying
fire.
authorized servicer.
equilateral
user
or
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
replaced
The exclamation
outlets,
outlets, extension cords,
frayed
it, discontinue
shock to persons.
wall
or
symbol
fitted,
use
a
pin,
or
5 amp
fuse, either in the
IMPORTANT: The wires in this mains lead
BLUE:
or
at the distribution board.
accordance with the
-
marked with the
coloured green
following
are
coloured in
codes:
NEUTRAL, BROWN: LIVE
-
As the colours of the
wires in the mains lead of this DVD
correspond
with
the
coloured
player may not
marking identifying
the
terminals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N
or
coloured black. The wire which
is coloured brown must be connected to the terminal which
is marked with the letter L
2
or
coloured red.
Introduction
Maintenance and Service
MaintenanceandService.................3
Beforeuse.............................4
FrontPanel/RearPanel...................5
RemoteControl.........................6
Installation and
When
shipping
Please
Setup
TVConnections.........................7
Optional Equipment
Refer to the information in this chapter
contacting a service technician.
HANDLING THE UNIT
Connections
.
.
.
.
.
.
.
.
.
.
.8
AerialConnections......................8
SpeakerSystemConnection...............9
.10-11
SetuptheWirelessSystem.
.12
Displaying Disc Information on-screen
InitialSettings.........................12
GeneralOperation......................12
Language...........................12
Display.............................13
.
.
.
.
.
.
.
.
.
.
.
.
.
the
the unit
packing
at the
factory.
Keeping the exterior
Do not
near
volatile
use
surfaces clean
liquids
such
as
insecticide spray
the unit.
.
Do not leave rubber
a
leave marks
the surface.
Cleaning
5.1SpeakerSetup.....................14
Lock(ParentalControl).................15
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
or
on
the unit
To clean the
Others..............................15
or plastic products in contact
long period of time. since they
with the unit for
Audio..............................14
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Operation
the Unit
Generalfeatures.......................16
Maintaining
Additionalfeatures.....................17
The DVD/CD Receiver is
Audio CD
MP3/WMA file
.18
Playing
ProgrammedPlayback..................18
ViewingaJPEGfile....................19
PlayingaDivXMoviefile.................20
.21
PresettingtheRadioStations
ListeningtotheRadio...................21
RDSOperation.........................22
SleepTimerSetting.....................23
an
carton and
original shipping
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
.
.
save
before
or
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
high-tech, precision
optical pick-up lens and disc drive parts
worn, the picture quality could be
a
device. If the
are
dirty
or
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
Dimmer...............................23
of your old
Mute.................................23
Disposal
UsingHeadphoneJack..................23
Selectinginputsource...................23
XTS/XTSpro...........................23
1. When this crossed-out wheeled bin
VIRTUALsound........................23
SoundMode...........................23
symbol
product it means the product
by the European Directive
is attached to
is covered
appliance
a
2002/96/EC.
2. All electrical and electronic
products should
disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
be
REFERENCE
LanguageCodes.......................24
AreaCodes...........................24
Troubleshooting.....................25-26
Specifications.........................27
government
or
the local authorities.
3. The correct
will
disposal of your old appliance
help prevent potential negative
consequences for the environment and
human health.
Translated Statements of
Compliance.
This product follows the provisions
the European Directive 1999/5/EC.
4. For
detailed information about
disposal
appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
more
of your old
of
This
product
is manufactured to
with the radio interference
of EEC DIRECTIVE
comply
requirements
89/336/EEC,
93/68/EEC and 73/23/EEC.
3
Introduction
Before
of
Types
use
Playable
Discs
DVD
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future
(8cm/12cmdisc)
reference.
Video CD
This manual
provides
information
on
the
(VCD)
(8cm/12cmdisc)
operation
Audio CD
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
(8cm/12cmdisc)
In
addition, this unit
SVCD and CD-R
About the
"
Symbol Display
MP3, WMA, JPEG
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
on
that
Note:
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
is applicable only
symbol.
to the disc
of the
following symbols
represented by the
one
or
DivX files.
as
the
Notes
rear
on
a
regional code printed on the rear of the
play only DVD discs labelled same
can
of the unit
Regional
or
globe
DVD and finalized DVD±R/RW
Video CDs
number must match your DVD
code or the disc cannot play.
Regional
WMA Discs
JPEG Discs
DivX Discs
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from
Digital
Theater
Systems,
Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-
patents issued and pending. "DTS" and "DTS Digital
Surround"
are
Inc.
Inc.
clearly
visible
on
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
MP3 Discs
4
a
numbers in it
Audio CDs
Systems,
Systems,
"ALL".
Codes
Most DVD discs have
wide
DVD-RW, DVD+RW,
titles,
a
Code
Regional
This unit has
unit. This unit
A section whose title has
play
CD-RW that contains audio
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions.
specific
Used in this Manual
Indicates
can
Notes:
DVD video disc.
Symbol
or
registered trademarks of Digital Theater
Copyright 1996, 2003 Digital Theater
All Rights Reserved."
Code" appears
on
the TV
screen.
Front Panel/Rear Panel
PHONES connector
STANDBY/ON
DISC
Lights
Press and hold down this button about 3
mode
OPEN/CLOSE button
red when the
receiver is in
seconds, then press repeatedly
Standby
VOLUME controller
DISPLAY Window
Remote
sensor
TUNING(-/+)
/SKIP(.bb/BB>)
USB Port
Connect to
to select
other function.
(off).
a
USB
MONO/ST./
port of
P./STEP
multimedia
(USB
Introducin
FUNC./PLAY
Tray
STANDBY indicator
memory
etc.)
buttons
STOP
Power Cord
SPEAKER connectors
FM Antenna connector
OUTPUT
(TO TV)
EURO AV socket
Connect to
SCART
a
TV with
jack.
L
AUDIO
R
AM
Loop
Antenna connectors
TRANSMITTER(D
C 7V OUT)
Connector
Connect
a
wireless
AUX IN AUDIO
Input (L/R)/
Connectors
transmitter
Do not touch the inner
panel.
Electrostatic
permanent damage
pins of the jacks on
discharge may cause
the
rear
to the unit.
5
(Z)
OPEN/CLOSE
Remote Control
and closes the disc
Opens
tray.
AUX
Selects
POWER
Select the
output
To
(CD/DVD)
source
System's
tuner
(FM
ly
bands)
directly
select numbered
or
options
in
enjoy great
sound effect.
Selects
b/B/v/V
Selects
menu
TITLE
Displays the disc's Title
VOLUME
To
adjust speaker volume.
Accesses
(./>)
STOP ( x )
or removes
Program
menu.
MEMO.
Enter
a
radio station's
frequency
into the
tuner.
(X)
(B)
CLEAR
Removes
REPEAT
a
track number
the
on
program menu or a mark on the
MARKER SEARCH menu.
all
MUTE
REPEAT A-B
Repeats
menu, if available.
(+/-)
PROG.
REVERSE/FORWARD SKIP
Repeat chapter, track, title,
selection.
menu
TUN.(-/+) (b/B):
playback.
PLAY
the
To tune in the desired radio station.
forward.
PAUSE/STEP
menu.
Select programme of Radio.
.
SCAN/SLOW(bb/BB)
Reverse/ Forward slow
in the
option
PRESET(v/V):
DVD disc.
or
an
display.
(left/right/up/down)
Acknowledges
MENU
Search backward
language (DVD).
ENTER
SETUP
menu on a
subtitle
DISPLAY
Selects the sound mode.
Accesses the
a
Accesses On-Screen
language (DVD) or
audio channel (CD).
setup
menu.
Selects the VIRTUAL sound
audio
or removes
MARKER SEARCH
VIRTUAL
SOUND
Accesses
panel during
point during playback.
a
Displays
AUDIO
an
of the
SUBTITLE
This button is not available
an
the front
on
SEARCH
*
Selects
change brightness
window
MARKER
Marks
sound.
To
off automatical-
System to turn
specified time.
in power-on status.
a
XTS pro
enjoy
a
Press to
natural and realistic
more
at
display
menu.
To
the multimedia files.
DIMMER
service, programme number
a
enjoy
Set the
and AM
0-9 numerical buttons
Select
source.
SLEEP
BAND
Select the
input
USB
DVD
ZOOM
sequence.
RDS
To view the various
displays
of the RDS
options
PTY
To start
a
search for
a
specific
PTY
type.
RETURN
Removes the
Remote Control
sensor
About 30° in each direction in front of the remote
sensor
Remote control
Remove the
the remote
6
new
batteries. Never mix different
battery
battery
installation
cover on
control, and insert
(size AAA) batteries
aligned correctly.
Caution
Do not mix old and
menu.
Operation Range
Point the remote control at the remote sensor and press the
buttons.
Distance: About 23 ft (7 m) from the front of the remote
Angle:
setup
types of batteries (standard, alkaline, etc.).
with
the
rear
of
two R03
and
Installation and
Setup
TV Connections
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
SCART connection
Connect the EURO AV OUTPUT
(TO TV) socket on
corresponding in jacks
cable (T).
the DVD/CD Receiver to the
Tips:
on
your TV and other equipment you
wish to connect, there are various ways you could
Depending
connect the DVD/CD Receiver. Use
one
the scart
If your television is
a
high-definition
or
"digital
you may take advantage of the
DVD/CD Receiver's progressive scan output for the
highest
Please refer to the manuals of your TV, VCR,
System or other devices as necessary to
video resolution
possible.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
Stereo
make the best connections.
read TV's owner's manual then set the resolution
Caution:
sure
directly
using
ready" television,
of the
connections described below.
Make
the TV
on
the DVD/CD Receiver is connected
to the TV. Select the correct AV
input
on
your TV.
Do not connect your DVD/CD Receiver to TV via
your VCR. The DVD image could be distorted by
the copy
that your TV
can
accept.
Note:
A
picture
via scart
input
is not
supported.
InstaliodSeup
protection system.
Rear of TV
SCART INPUT
T
L
AUDIO
R
Rear of DVD/CD Receiver
7
Optional Equipment Connections
Aerial Connections
1. Connect
Connect the
VCR to the AUX IN connectors.
a
2. Connect the USB
player, etc.)
port of
to the USB
USB
a
port
on
MP3
Memory (or
supplied
FM/AM aerial for
listening
to the
radio.
the front of the unit.
Connect the AM
Loop
aerial to the AM aerial
connector.
Connect the FM Wire aerial to the FM aerial
Rear of VCR
Front of DVD/CD Receiver
connector.
Notes:
AUDIO
AUDIO
USB
To
(
To AUDIO OUT
MP3
Memory,
Player (or
Memory Card Reader, etc.)
(L/R)
Be
To AV IN AUDIO
prevent noise pickup, keep the AM Loop aerial away
components.
from the DVD/CD Receiver and other
to fully extend the FM wire aerial.
connecting the FM Wire aerial, keep
possible.
sure
After
(L/R)
it
as
L
AUDIO
R
AM
FM Wire aerial
To Remove the USB from the unit
1. Choose
different function mode
a
(x)
twice in
or
Loop
aerial
(supplied)
(supplied)
press the STOP
a row.
2. Remove the USB from the unit.
L
AUDIO
R
Notes:
Don't extract the USB device in
Music files
files
can
This unit
(MP3/WMA), image
be played.
can
not
use
operating.
(JPEG)
files
and DivX
USB HUB.
Recommended
Memory Card
(CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
Compatable with : FAT16,32
Only use the memory cards recommended.
Devices which require additional program installation
Flash Card
Compact
-
-
when you have connected the unit to
not
In
a
computer
case
of
a
USB
HDD, make
sure
to connect
an
auxiliary power cord to the USB HDD for porper
operation. A primary partition of drive is supported
to four. If there is an extention partition it is not
supported.
If the drive of USB device is two
folder is
move
to
displayed on
the previous
the
up
more, a drive
If you want to
after you select a folder,
or
screen.
menu
press RETURN.
Digital camera and mobile
8
are
supported.
phone
are
not
supported.
horizontal
as
Speaker System Connection
Connect the
center
to the front
speakers
speaker connectors
(right, left)
Notes:
Optimum performance
or
Connect the subwoofer to the woofer connector.
Connect the power cord of the Wireless RX to the
outlet, then connect the Wireless RX and the rear
speaker (right, left)
with the
speaker
can
be
implemented only
when the
Wireless TX and the Wireless RX within distance of 2m to
at the main set.
cable.
10m is used since communication failure may
distance is used.
occur
if
longer
Be
sure
terminal
cables
to match the
on
are
speaker
cable to the
the
appropriate
If the
components: + to + and to
reversed, the sound will be distorted and will
--
--.
Connect the DC IN connector of the Wireless TX
lack base.
and the Wireless TX
It takes about a few seconds (and may take longer) for the
Wireless TX and Wireless RX to communicate with each
7V
(DC
OUT)
connector of the
main set with the DC power cable.
Connect the SOUND SIGNAL connector of the
Wireless TX and
rear
(right, left) speaker
other.
When the unit is turned
of
connectors of the main set with the sound
mode
signal
off, the Wireless RX is in standby
after about 10 seconds.
(off) automatically
cable.
If the Wireless RX is turned
Set the distance between Wireless TX and
not function.
off, the wireless speaker will
Wireless RX within 10m.
Center
Front
speaker
(Right)
Front
speaker
(Left)
speaker
InstaliodSeup
Wireless TX
SIGNAL
ID./CH.
DC IN
Sound
cable
signal
Red
Black
L
AUDIO
R
DC power cable
Subwoofer
Wireless RX
Rear
Rear
speaker
(Right)
speaker
(Left)
About Ferrite Core
Be
sure
to attach the ferrite
(for connecting
This ferrite
to this
core can
core
Press the
2
Wind the cable
3
Close the ferrite
speaker
cables
reduce noises.
How to attach the ferrite
1
to the
unit).
core
stopper [a] of the ferrite
once on
core
the ferrite
core
to open.
core.
The
unitl it clicks.
Note:
Attach the ferrite
length
here is
short
core near
the unit
(Refer
to the
fig.3
and
comment.).
as
as
possible.
80mm
9
Setup
the Wireless
System
Note:
If there is
Note:
If there is
longer than 5 minutes,
automatically swith
standby mode. In standby mode, both LEDs will
red. LEDs will turn blue when an audio signal
a
product
with
nearby, interference may
(Ex : Micro wave oven)
a
strong electromagnetic field
occur.
to
a
turn
If you
DC IN connector
ID/CHANNEL
(ID./CH.)
button
SOUND SIGNAL
SIGNAL
ID./CH.
connector
DC IN
LED indicator of Wireless TX
LED indicator
-
"BLUE"
The main set is turned on,
and transmitting.
*
LED indicator
-
everthing
"RED"
The Wireless TX is in
standby
LED indicator
(No display)"
-
is connected
"OFF
mode.
The main set is turned off.
LED indicator
the
Displays
operating
status.
Wireless RX
LED indicator
the
Displays
operated
status.
LED indicator of Wireless RX
*
LED indicator
-
"BLUE"
The Wireless RX is
*
LED indicator
-
receiving
a
signal
of Wireless TX.
"RED"
The Wireless RX is in
standby
mode.
ID. button
Wireless
speaker
Power cord
10
signal
for
operate main unit then wireless speakers (rear
speakers)
*
audio
returns.
Wireless TX
*
no
Wireless TX and Wireless RX will
connector
mode.
sound within
a
few seconds in
standby
Changing
channel of Wireless
a
Setting
TX and Wireless RX
If there is
a
similar wireless
ID/CHANNEL
(ID./CH.)
product nearby,
change
When the unit is
If
to
(ID./CH.)
operating
signals
3. Press the ID/CHNNEL
do not
for
setting
4
on.
button of Wireless
more
same
time
than about 3 seconds.
The blue LED indicator of wireless TX and
Wireless RX will flicker.
Disconnect the DC power cable from the
4. Release the ID/CHNNEL
Wireless TX.
(ID./CH.)
button of
Wireless TX and ID button of Wireless RX.
Connect the DC power cable from the Wireless
TX while you pressing the ID/CHANNEL (ID.CH.)
button of Wiress TX.
-IDissetup.
Notes:
The blue LED indicator will flicker.
If there is
Disconnect the DC power cable from the
Wireless TX and release the ID/CHANNEL
(ID.CH.)
(ID./CH.)
TX and ID button of Wireless RX at the
above, operate it again about
as
-
-
again.
2. Turn the Wireless TX and Wireless RX
three times.
3
you
set.
Wireless
eachother.
button for less
If the wireless TX and wireless RX
2
ID is set
use a new
1. Set the wireless TX and wireless RX within 50cm of
than about 3 seconds.
1
an
occurs or
button of Wireless TX.
Press ID/CHANNEL
Auto
manufactured, the ID is already
interference
an
RX,
setting
match after
ID of Wireless TX and
Wireless RX
interference may occur. In this case,
another channel using
Manual
an
Do not
button of Wiress TX.
product
operate
network
Connect the DC power cable from the
a
with
a
interference may
nearby,
a
device)
portable
near
this
strong electromagnetic field
occur.
transmitter
(such
as a
wireless
product.
Wireless TX.
-
The ID
setting
becomes
optimization automaticly
.
Note:
The wireless RX may not receive the changed channel of wireless
TX (The LED of Wireless TX will turn blue. The LED of Wireless
RX will turn
red).
In this
case
set the ID
as
next
paragraph.
CAUTION
Rear
speaker (wireless speakers) is
no
sound.
The DC power cable is not connected the Wireless TX and main unit.
Connect the Wireless TX and main unit with the DC power cable.
Power cord of wireless RX
(or
wireless
Connect the Power cord of wireless RX
speakers) is not connected.
(or wireless speakers).
LED indicator of Wireless TX is RED.
-
-
-
-
Turn
on
the main unit.
Set to sound mode
by PL ll MOVIE, PL
(page 23)
sound compatible disc.
ll MUSIC
or
PL ll MTRX.
(page 23)
Set to XTS-ON.
Insert
a
5.1 ch
Sound is cut off.
Change
channel of Wireless TX.
a
and Wireless
If
rear
(Follow steps "Changing
a
channel of Wireless TX
RX")
speaker (wireless speakers)
is
no
sound after
operating as above,
speakers) or set
and connect the power cord of Wireless RX (or wireless
wireless TX and wireless RX (or wireless speakers).
disconnect
up
an
ID of
11
Displaying
Disc Information
Initial
on-screen
You
can
loaded
1.
display
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The items
2.
displayed differ depending
playing status.
type
or
You
can
change
Title
select
an
(Track)
--
the disc
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 12 to 15.
To
display
and exit the Menu:
Press SETUP to
display
the
menu.
SETUP will take you back to initial
by pressing v / V and
setting by pressing b / B.
A second press of
screen.
item
select the
or
on
Settings
Current title
(or track).
(or tracks).
number/total number of titles
Chapter Current chapter number/total number
of chapters.
Time
Elapsed playing time.
Audio
Selected audio language or channel.
--
--
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
GENERAL OPERATION
--
Subtitle
Angle
Sound
--
--
--
Selected subtitle.
Selected
angle/total
number of
angles.
no
button is
screen
Press SETUP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
Selected sound mode.
pressed for a
display disappears.
few
seconds, the
Setup
menu
appears.
the current setting for the selected
alternate setting(s).
Note:
If
1.
item,
as
well
as
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
on-
or
PLAY to exit the
option
Setup
then
menu.
LANGUAGE
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Select
OSD
Select
a
language
for the
Setup
menu
and
on-screen
display.
Disc Audio / Subtitle / Menu
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
--
Refers to the
track
original language
the disc
was
Other
To select another
in which
recorded.
language, press number
corresponding 4digit number according to the language code list
on page 24. If you enter the wrong language code,
--
buttons then ENTER to enter the
press CLEAR.
12
DISPLAY
DISPLAY
TV
16:9
Aspect
Display
Widescreen
Mode
Move
TV
Select
Aspect
4:3
--
16:9
Display
Display
Select when
--
a
Select when
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
Mode
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays a wide picture with bands
portions of the screen.
InstaliodSeup
on
the upper and lower
Panscan
on
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
do not fit.
13
AUDIO
5.1
Each DVD disc has
Set the receiver's
variety of audio output options.
AUDIO options according to the
a
type of audio system you
Press ENTER and 5.1
On
Vocal
On
Small
Volume
0
dB
Distance
0
m
Test
Move
Off
Select
Select
Control
(DRC)
format, you
can
hear
a
program's
soundtrack in the most accurate and realistic
thanks to
audio
3.
Adjust options using
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
Select
Dolby Digital only
Return
Use b / B to select the desired
4.
effect.
Move
2.
presentation possible,
digital
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
*1:
menu
Front L
Size
With the DVD* 1
Speaker Setup
AUDIO
Select
Speaker Setup
DRC
Speaker
Dynamic Range
for the built-in 5.1 channel
appears.
AUDIO
5.1
following settings
surround decoder.
1.
use.
Speaker Setup
Make the
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
menu.
selection
Speaker
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Vocal
Certain
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
mix into normal stereo sound.
on
the disc will
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
fixed, you
are
cannot
the
Volume
Press b / B to
speaker. (-5dB
adjust the output
5dB)
level of the selected
~
Distance
If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
Press b / B to
speaker. (You
same
time.
the Distance of the selected
adjust
adjust
can't
front / Woofer
speakers)
Test
Press b / B to test the
of each
signals
the volume to match the volume of test
memorized in the
Front Left
Rear
14
speaker. Adjust
signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
LOCK
Area Code
(Parental Control)
Enter the code of the
LOCK
Rating
Unlock
Password
****
Area Code
US
whose standards
area
used to rate the DVD video
disc, based
on
were
the list
on
page 24.
Select "Area Code"
1.
on
the LOCK
menu
then
press B.
Follow
2.
Move
step
2
as
shown
previous paragraph
(Rating).
Select
Select the first character
3.
Blocks
of rated DVDs based
playback
content. Not all discs
are
1. Select
the LOCK
"Rating"
on
on
Press B and select the second character
4.
their
v / V buttons.
using
Rating
using
v / V buttons.
rated.
menu
Press ENTER to confirm your Area code selection.
5.
then
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
OTHERS
OTHERS
and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
Input
password
a
3. Select
a
Rating
rating
from 1 to 8
using
PBC
On
DivX(R) Registration
Select
Rating one (1) has the most
rating eight (8) is the least
1-8:
InstaliodSeup
the v / V buttons.
restrictions and
Select
Move
restrictive.
PBC
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Set
Playback
enter
Off: Video CDs with PBC
or
change password.
1. Select Password
2. Follow
step
2
as
on
the LOCK
shown above
then press B.
(Rating).
change the password, press ENTER when the
"Change" option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
3. Press SETUP to exit the
1.
2.
Press SETUP to
the
display
as
are
played
to
the
same
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while "Select" is selected and the
"DivX(R) Registration" option
then press B.
registration code will appear.
Use the registration code to purchase
clear it
using
the
Setup
rent the
www.divx.com/vod. Follow the instructions and
a
disc for
playback
on
this unit.
menu.
Input
6-digit number "210499" and press
ENTER. The password is cleared.
or
VOD service at
download the video onto
the
played according
Audio CDs.
videos from DivX
can
are
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX VOD service. For more
menu.
you
Off.
We
forget your password
If you forget your password,
following steps:
or
DivX(R) Registration
menu
To
If you
to On
the PBC.
way
can
(PBC)
On: Video CDs with PBC
selection, then
Password
You
Control
3.
Press ENTER to exit.
Note:
All the downloaded videos from DivX
be
played
back
on
VOD
can
only
this unit.
15
Operation
General features
Buttons
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
(.
closes the disc
or
During playback,
Press X
SKIP
Discs
Operations
/
>)
tray.
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press
next chapter/track or to
current chapter/track.
SKIP
Press SKIP . twice
briefly
(.
to
>) to go to the
beginning of the
or
return to the
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m or M) repeatedly
required scan speed.
DVD : 5 steps (X2, X4, X8, X16, X100)
DivX disc, Video CD :4 steps (X2, X4, X8, X16)
WMA/MP3, Audio CD : 3 steps (X2, X4, X8)
to
select the
REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
press REPEAT
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point
point B and repeats a sequence from point A
(Starting point) to point B (End point).
A and
Press REPEAT A-B to exit.
ZOOM
During playback or pause mode, press ZOOM to enlarge
image (3 steps).
You can move through the zoomed picture using bBvV
the video
buttons.
TITLE
If the current DVD title has
appears
on
the
screen.
a
menu, the title
Otherwise, the disc
menu
menu
may
appears.
DVD MENU
(SUBTITLE)
The disc
menu
appears
on
the
screen.
During playback, press SUBTITLE repeatedly
language.
to select
desired subtitle
(AUDIO language) During playback, press AUDIO repeatedly
different audio language or audio track.
(AUDIO channel)
Press AUDIO
to hear
a
repeatedly during playback to hear a
(STER., LEFT or RIGHT).
different audio channel
SLOW
16
Pause mode, press SLOW (m or M) to select the
required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
a
Notes
general features:
on
If you press SKIP
(>)
Chapter (Track) playback,
Last Scene
once
the
during Repeat
repeat playback
Memory
This receiver memorizes last
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the receiver or
cancels.
scene
even if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
Zoom may not work on some DVDs.
The A-B repeat function is available only in the
current title.
Note:
This receiver does not memorize the
Additional features
switch off the receiver before
Time Search
To start
System
at any chosen time
playing
on
the disc:
scene
commencing
of
to
a
disc if you
the disc.
play
Select
Press v / V to select the time clock icon and
appropriate system mode for your
system. If NO DISC appears in the display
window, press and hold P./STEP on the front panel or
"--:--:--" appears.
select
Press DISPLAY
1.
2.
3.
Input
the
You must select the
TV
during playback.
required
start time in
seconds from left to
remote control for
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
right.
Press ENTER to confirm.
4.
Playback
the
NTSC:
PAL:
Select when DVD/CD Receiver is connected
Select when DVD/CD Receiver is connected
with PAL-TV.
Marker
a
start
can
playback
To enter
points.
displayed.
with NTSC-TV.
Marker Search
You
than 5 seconds to be able to
system does not coincide with
system of your TV, normal colour picture may
not be
starts from the
more
system (PAL, NTSC).
When the selected
selected time.
To enter
a
desired
point
the TV
screen
on
from up to nine memorized
at the
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
1.
During
disc
search
menu
2.
Clear
a
Marked Scene
playback,
appears
press SEARCH. The marker
on the screen.
Within 10
seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
3.
marked
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
can play any marker by
the marker search menu.
inputting
its number
Screen Saver
The
Stop
appears when you leave the unit in
mode for about five minutes.
screen saver
17
Playing
This unit
an
Audio CD
Audio CDs
play
can
or
or
MP3/WMA file
MP3/WMA files
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
recorded media.
program
MP3/ WMA/ Audio CD
Once you insert
Audio
CD,
MP3/WMA files recorded media
an
a menu
the TV
on
or
1.
2.
Insert
Select
disc.
a
track
the
on
"List", then press PROG.
or
"
additional tracks
place
0:00:00
on
the list.
1/104
MP3
Program
List
contain 300 tracks.
(Add)" icon then press ENTER to place
the selected track on the "Program" list. Repeat to
1/12
Audio CD
a
select
functions. Refer to page 16.
0:00:00
can
Audio CD and MP3/WMA Discs:
screen.
appears
Press v / V to select a track/file then press PLAY or
ENTER and playback starts. You can use variable
playback
Programmed Playback
JPEG
List
Program
Note:
Track1
Music Folder 1
Track2
Music Folder 2
Track3
Music Folder 3
You
Track4
Music Folder 4
Track5
can
add all tracks in the disc. Select
"
( Add All)"
Music Folder 5
Track6
Music Folder 7
Track8
Music Folder 8
3.
Tips:
move
to the next page.
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
top of the
on
menu
is
4.
MP3 / WMA disc
limited
as
compatibility
with this
highlighted.
player
ENTER to start.
To
resume
normal
select
playback,
MP3/WMA)
is
follows:
Sampling frequency: within 32 48 kHz (MP3),
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA)
Playback begins
in
a
played
once.
playback
from
programmed
(or
track of AUDIO CD
list and then press PLAY.
-
-
a
file extension other than
an
MP3/WMA file
".mp3"
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
to
format should be ISO 9660
File
should have
must
incorporate
?
They
should not contain
?
The total number of files
an
a
:
the disc should be less than
999.
This DVD/CD Receiver
requires
discs and
recordings
to
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
permission
is
required
in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the
copyright
owner.
repeat
a
desired
repeat mode.
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
a
does not
Track from
play repeatedly.
"Program"
List
Use vVto select the track that you wish to
Program list.
2.
erase
"
Press CLEAR.
Alternatively, select
(Delete)"
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks
meet certain technical standards in order to achieve
Customers should note that
disc. The
from the
"
*
<>letc.
on
?
1.
/ ?
a
TRACK:
Erasing
maximum of 8 letters and
.mp3 or .wma extension.
special letters such as
playing
Press REPEAT to select
?
playback MP3 / WMA files.We recommend
Easy-CD Creator, which creates an ISO
?
Press REPEAT when
?
that you use
9660 file system.
names
Tracks
icon appears.
2.
CD-R
impossible
1.
/ ".wma".
?
physical
Repeat Programmed
-
The DVD/CD Receiver cannot read
that has
18
or
list have
"Program"
-
?
Press PLAY
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
5.
?
Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
page.
Press MENU to
?
icon
then press ENTER.
Music Folder 6
Track7
Erasing
on
the
the list.
Complete Program
Use v / V to select
"
(Del all)",
List
then press
ENTER.
Note:
The programs
are
also cleared when the disc is removed.
Viewing
This unit
a
JPEG file
Zoom
JPEG
Each time press ZOOM the
order.
play discs with JPEG files.
Before playing JPEG recordings, read the
JPEG Recordings on right.
1.
can
Insert
a
disc and close the
The PHOTO
menu
notes
on
Zoom
appears
JPEG disc
limited
Preview
List
the video
enlage
screen.
PHOTO
in the
Zoom off
y
Press V/b/m to reduce the video
the TV
on
on
Press v/B/M to
tray.
setting change
following
compatibility
image.
image.
with this
player
is
follows:
as
JPEG Folder 1
JPEG Folder 2
?
JPEG Folder 3
JPEG Folder 4
Depending
upon the size and number of JPEG
a long time for the DVD/CD
files, it could take
JPEG Folder 5
JPEG Folder 6
Receiver to read the disc's contents. If you don't
display after several minutes,
JPEG Folder 7
JPEG Folder 8
see an on-screen
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
Folder
previous
remote to
3.
list,
use
the v / V buttons
on
the
and press ENTER.
highlight
to
move
?
to the
?
four Slide
:
Speed options
(Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
>
are
(Slow),
>>
x
2048
pixels
and burn another disc.
The total number of files and folders
on
the disc
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
Tips:
There
2760
should be less than 999.
?
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP
previous menu (JPEG menu).
as
?
---
?
copying
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
though
the files
Windows
by
or
as
into the CD
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD Receiver. Even
are
shown
as
JPEG
image
files in
Explorer.
Slide Show
Use vVbBto
highlight
the
(Slide Show)
then
press ENTER.
Still Picture
1.
Press PAUSE/STEP
Operation
slide show.
during
The DVD/CD Receiver will
now
go into PAUSE
mode.
2.
To return to the slide
PAUSE/STEP
Moving
press
again.
(.
or
>)
once
to advance to the next
To rotate
while
or
viewing a
previous file.
picture
Press b / B
picture
or
to another File
Press SKIP
picture
show, press PLAY
during showing
clockwise
or
a
picture
to rotate the
counter-clockwise.
19
Playing
DivX Movie file
a
DivX disc
as
this DVD/CD Receiver you
Using
play
can
Insert
a
appears
disc and close the
on
the TV
with this
is limited
player
DivX disc.
?
1.
compatibility
follows:
tray. The MOVIE
menu
Available resolution size of the DivX file is under
800x600
screen.
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
45 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 2
Movie Folder 3
Movie Folder 4
"
"
_
display.
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the
screen
frame is
over
30
per 1 second, this unit may not operate
normally.
2.
Press v / V to select
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
the remote to
on
Playable
press ENTER.
?
3.
If you want to view
v / V to
4.
highlight
particular file, press
file and press ENTER
or
PLAY.
Tips:
Press MENU to
move
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the
a
CD with
menu
is
or
audio is
".avi
DivX file
", ".mpg ", ".mpeg ", ".divx"
a
a
Press STOP to exit.
On
interleaved, either video
outputted.
and
highlight
If the video and audio structure of recorded
file is not
highlighted.
Playable
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Playable
?
Codec format
"DIVX3.xx
"MP43
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Notes:
Be
to select "SUBTITLE ON" mode
sure
subtitle file every time before
When the subtile has
original
subtile is
only
more
playing
than two
can
during
not
adjust
the DivX file
Notice for
by pressing
DivX file
languages
the
.
in the
?
file,
can
not be
played.
playing.
displaying
the Divx subtitle
display properly during playback,
press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle
is
20
displayed properly
"AC3
?
Audio format
", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
-
within 24
sound mode and VIRTUAL sound
If the subtitle does not
Playable
available.
The DivX files in your memory card
You
a
?
-
-
-
the Radio Stations
Presetting
You
preset
can
Before
tuning,
50 stations for FM and AM
make
sure
Preset radio stations in the DVD/CD Receiver's
(MW).
that you have turned down
the volume.
(MW)
on
the remote control until FM
appears in the
or
AM
display
Press and hold
about two seconds
until the
starts to
TUN.(-/+) for
frequency indication
Scanning stops
when the DVD/CD Receiver tunes in
a
or
AM
(MW)
repeatedly
control to select the
appears in the
the remote
on
preset station you
want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
change,
station.
3.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
Press PROG./MEMO.
A
the
window.
Press PRESET +/-
2.
then release.
4.
on
The last received station is tuned in.
BAND, FM and AM
(MW) changes alternately.
3.
radio stations"
(see "Presetting
Press BAND until FM
1.
window.
display
And then every time you press
2.
memory first
left).
Press BAND
1.
to the Radio
Listening
on
the remote control.
To turn off the radio
preset number will flash in the display window.
Press POWER to turn the DVD/CD Receiver off
Press PRESET +/-
5.
the
on
preset number you
Press PROG/MEMO
6.
the remote control to select
want.
on
the remote control
again.
Repeat steps
To listen to
For manual
3 to 6 to store other stations.
or
a
station with
Press
TUN.(-/+) repeatedly
station manually.
in
a
weak
step
signal
Press and hold PROG./MEMO. for about two seconds
in the
window
display
again, the stations
are
If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "ERASE ALL" display will go off by itself and
change
to normal mode.
2.
TUN.(-/+) repeatedly.
tuning,
preset radio station directly
the number buttons
on
the remote
press 1 then 9
a
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
in the
on
on
seconds).
noisy
the front
display
panel
so
that "ST."
window. There will be
no
effect, but the reception will improve. Press
again
to restore the stereo effect.
To
If all stations have
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
change
step
preset radio station directly.
For example, to listen to preset station 4, press 4
the remote control. To listen to preset station 19,
the button
Note:
To
a
can use
control to select
To clear all the stored stations
appeared
in
3 to tune in the
To select
and then press PROG./MEMO.
cleared.
press
tuning
press and hold TUN.(-/+) for
about two seconds on the front panel.
You
and "ERASE ALL" is
automatic
tuning,
For automatic
To tune in
or
(DVD/CD, AUX, USB).
non-preset radio stations
Use manual
The station is stored.
7.
select another function mode
the
preset number, follow the steps
improve reception
Reorient the supplied antennas.
a
5-6
as
above.
21
RDS
Programme Search (PTY)
Operation
A
This unit is
which
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
use
in many countries, RDS is a
station call signs or network
transmitting
description of
system for
information,
indicate the
a
indicate each PTY
RDS TUNING
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
sign
Window
and the RDS indicator will
as
well
as
light
in the
Display
indicators for the RDS services
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
the station.
RDS DISPLAY OPTIONS
The RDS
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
a
sign
station is first tuned. In normal
will indicate the station
display
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data
types in the sequence:
FREQUENCY
(PS
PS
(Programme
PTY
RT
Service
CT)
The
name)Display Window.
channel is shown in the
name
with
along
an
of the
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
Music
EASY M
Easy Listening
LIGHT M
Light
CLASSICS
Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
Programmes
Programmes
Programmes
Programmes
PHONE IN
Phone-In
Travel and
LEISURE
Leisure and
RT
JAZZ
Jazz Music
COUNTRY
Country
NATION M
National Music
OLDIES
Oldies Music
of
A "text" message contains special
information from the broadcast station. Note that
(Radiotext)-
this message may scroll
permit
CT
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables
the unit to receive the actual time and show it in
the
Display
Window.
Note:
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
NONE,
the
RT
NONE,
Touring
2.
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
4.
Message
Broadcast Information
Programme Type (PTY)
Press BAND to select FM mode.
Press PTY
on
the remote
show the last PTY in
3.
Hobby
Music
You may search for a specific
by following these steps:
1.
Music
Music
TRAVEL
(Programme type recognition)- The name
type is shown in the Display
Press PTY
repeatedly
When the PTY is
control, the display will
use.
to select
a
desired PTY.
selected, press TUN.(-/+).
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
22
of the
Speech Programme
the programme
Window.
PTY
explanation
PTY.
the correct time.
a
ability to encode
Programme Type (PTY) codes that
type of material being broadcast. The
list shows the abbreviations used to
following
station programme type text message
about the station or specifics of musical selection and
When
benefit of RDS is its
major
broadcasts with
Sleep
You
can
Timer
XTS/XTS pro
Setting
set the DVD/CD Receiver to turn off
at
automatically
specified
a
The SLEEP indicator and
display
sleep
sleep
in
time.
XTS ON
time appears in the
window.
NORMAL
→
→
XTS-P ON...
XTS-P ON
Each time you press SLEEP the
changes in the following order.
2.
setting changes
the
Press SLEEP to set the desired
1.
Each time you press XTS pro the
following order.
time.
The
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
setting
unique
creates the
SLEEP180→150→120→90→80→70→60→50→40→
30→20→10→OFF
XTSON
When
playing the movie with the
relatively to the general music, it
Note:
You
can
check the time
Receiver turns off.
Press SLEEP. The
display window.
remaining
before the DVD/CD
sense
remaining
time appears in the
Dimmer
repeatedly.
Connect a stereo headphone
PHONES connector.
from
2.1
NORMAL
can use
AUX
VCRs
IN, EURO AV
plug ( 3.5mm)
into the
supplied with
operation.
Press AUX
the unit for further information
control to
for
(L/R)
Connectors.
selecting
TV-AUDIO: for
the
analog signal
selecting
signal
from SCART.
Note:
can
on
input source by pressing
panel.
the front
Press and hold down this button about 3
then press
repeatedly
to select
input
seconds,
source.
Multichannel sound
a
5.1 ch feel 10.1
provides
a
emotion
can
Sound Mode
one
also select the
VIRTUAL
which you are involved with sound and you
feel detailed sound.
You
FUNC. button
5.1 ch
ch sound therefore this mode
from AUX AUDIO IN
the TV audio
Effect
3D STEREO
The Multichannel sound makes
Each time you press this button, the mode of the
function changes in the following sequence:
:
Display
VIRTUAL
Multichannel sound
select the desired
AUX
Source
2.1 ch.
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
source
repeatedly on the remote
input source.
VIRTUAL sound.
3D STEREO
other units connected to the
or
setting
when
connector. Refer to the owner's
manual
the
VIRTUAL sound
press VIRTUAL the
speakers are automatically disconnected
plug in a headphone (not supplied).
Selecting input
You
changing
changing it to
XTS-P and XTS mode tune off
Jack
Using Headphone
on
disabled when
CH.
mute your unit in order, for example, to
the telephone, "MUTE" indicator flashes in the
window.
display
You
temporarily
can
answer
you
mode is
2.1 CH to 5.1 CH and it is enabled when
Press MUTE to mute your unit.
The
via the
Note:
The XTS
Mute
You
of sound at woofer for you to satisfy with.
BYPASS, It creates the high
In the mode of 2 CH
display effect by playing the sound source
rear speakers same as the front speakers.
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
weak bass sound
enforces the
the
enjoy surround sound simply by selecting
pre-programmed sound fields according to
program you want to listen to (2 ch. sound only)
can
of the
.
BYPASS
ON STAGE →STUDIO
CLUB
THEATER 1
CHURCH
PL ll MOVIE
PL ll MUSIC
PL ll MTRX
BYPASS...
→
→
→
→
→
→
→
HALL
→
→
Note:
Initial sound mode is BYPASS.
23
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
24
code from this list.
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
The power is on, but
the DVD/CD Receiver
?
No disc is inserted.
?
Plug the power cord
wall outlet.
Insert
is
?
picture.
a
disc.
(Check
securely
into the
that the DVD or,
audio CD indicator in the DVD
does not work.
No
service.
The TV is not set to receive DVD
signal
?
Select the
mode
output.
display
lit.)
appropriate
the TV
on
so
video
the
input
picture from
the DVD/CD Receiver appears
TV screen.
?
The video cable is not connected
?
no
sound
or
The connected TV power is turned off.
?
Turn
?
The
?
Select the correct
a
connected with the
equipment
not connected
are
?
playback picture
is
does not start
Connect the audio cable into the
Turn
the
equipment
The power of the equipment connected
with the audio cable is turned off.
?
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
connecting
cable is
damaged.
dirty.
poor.
The DVD/CD Receiver
mode of the
so
jacks securely.
securely.
?
input
you can hear the
sound from the DVD/CD Receiver.
signal output.
The audio cables
the TV.
on
audio receiver
audio cable is not set to receive DVD
?
The
Connect the video cable into the
?
very low-level
sound is heard.
only
on
connected
with the audio cable.
?
Insert
a
it with
disc.
new one.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
is
?
An
the
jacks securely.
securely.
There is
on
unplayable
disc is inserted.
?
or
display
lit.)
Insert
disc
a
playable
disc.
the
(Check
type, colour system and Regional
code.)
?
?
The disc is
placed upside
The disc is not
placed
?
down.
Place the disc with the
within the
guide.
?
Place the disc
The disc is
?
A
menu
is
?
dirty.
on
the TV
?
screen.
The
Rating
level is set.
?
heard.
or
noise is
?
The disc is
?
The
?
dirty.
speakers and components
poorly.
are
?
The DVD/CD Receiver is located too
close to the TV.
tray
guide.
menu screen.
Cancel the
rating
Rating
function
or
change
level.
Clean the disc.
Connect the
speakers
and
components securely.
connected
?
the disc
Press the SETUP button to turn off
the
Loud hum
side
Clean the disc.
the
?
on
inside the
correctly
?
playback
down.
?
Move your TV away from the audio
components.
25
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
?
The
of the stations is too
weak
in with automatic
signal strength
(when tuning
tuning).
No stations have been
preset
or
preset
?
Tune in the station
manually.
?
Preset the stations
(page 21).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
?
properly.
The remote control is not
remote
does not work
?
sensor
pointed
at the
?
of the DVD/CD Receiver.
The remote control is too far from the
?
DVD/CD Receiver.
?
There is
an
Point the remote control at the remote
sensor
Use the remote control within about 23
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(7 m).
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The front
display
26
panel
is too dim.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
Specifications
Power
Genral
Refer to main label
Net
3.9
kg
430
x
External dimensions
(W
x
H
x
D)
conditions
CD/ VD
Video
Tuner
Refer to main label
supply
consumption
Weight
Power
FM
AM
[MW]
Amplifer
57
x
295
mm
5°C to
Operating
Operating humidity
Temperature:
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
0.5 %
Video
1.0 V
35°C, Operation
status: Horizontal
5% to 85%
laser, wavelength
650
nm
NTSC 525/60
625/50,
150 Hz to 18 kHz
More than 75 dB
(1 kHz,
NOP -6
dB,
20 kHz
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., SCART (TO TV)
108.0 MHz
-
or
65.0
-
74.0
MHz,
87.5
60 dB
140
522
-
-
(Mono)
1,620 kHz
or
520
-
1,720 kHz
450 kHz
Stereo mode
45W
Surround mode
Front: 45W
45W
+
(Rated Output Power 30W, 4Ω at 1 kHz, THD 10 %)
45W (Rated Output Power 30W, THD 10 %)
+
Centre*: 45W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Surround*: 45W
+
45W
Subwoofer*: 75W
(Rated Output Power 30W, 4Ω at 1 kHz, THD 10 %)
(Rated Output Power 60W, 8Ω at 30 Hz, THD 10 %)
AUX IN
Inputs
Outputs
MONITOR, PHONES: (32 Ω,
Type
Impedance
Frequency Response
1
1.0
Speaker
V)
Passive Subwoofer
150
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(LHS-36SEW)
1
Speaker
x
20,000 Hz
-
H
x
D)
65
(1m)
-
1,500 Hz
(1m)
75W
90W
150 W
175x351x270mm
Output
3.4kg
2.4GHz
Power
DC 7V
Power
Refer to label of wireless RX
Supply
requirements
Power consumption
Reception Output
to
Speaker
87 dB/W
0.45kg
subject
1
105x99x83mm
Transmission
are
Way
8Ω
45W
Wireless RX
specifications
1
85 dB/W
Rated
and
Way
4Ω
Wireless TX
Designs
108.0 MHz
8,000 Hz
(LHS-36SES)
Wirels sy tem
-
10.7 MHz
Front/Rear/Center
Speakrs
LPF/A-Filter)
More than 70 dB
change
Refer to label of wireless RX
2.4GHz
without notice.
27
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
replaced
this Guarantee.
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A.
The dealer may restrict the
B.
The dealer is not
guarantee
to the
original purchaser.
to carry out service under
guarantee if unauthorized modifications are
apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
obliged
made to the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We
respectfully point
exhausted
E.
Aerial
This
or worn
alignment
in
and
guarantee does
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
not affect your
adjustments
are
not covered
by
this
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
MODEL NO.*
*
Please
complete
Call 0870 873 5454
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
P/NO
:
3834RH0138M
Download PDF

advertising