LG | LX-130D | LG LX-130D Owner’s Manual

LX-130A/230A/330A-ENG(075G)
MICRO HI-FI SYSTEM
OWNER'S MANUAL
MODELS:
LX-130A/D/X, LXS-130
LX-230A/D/X, LXS-230
LX-330A/D/X, LXS-330
Please read this manual
operating
carefully
before
your set.
Retain it for future reference.
Designs and specifications are subject to
change without notice for improvement.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
Precautions
This label is located
on
the interior.
CAUTION
CLASS1
LASER
PRODUCT
RISK OF ELECTRIC
KLASSE1
LASER
PRODUKT
SHOCK DO NOT OPEN
LUOKAN1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
This
SERVICING TO QUALIFIED SERVICE PERSON-
LASER
Compact Disc player is classified
product.
NEL.
The CLASS 1 LASER PRODUCT label is located
as a
CLASS 1
on
the exterior.
Explanation Graphical Symbols:
The
lightning flash with arrowhead symbol,
an equilateral triangle is intended to
within
alert the
user
to the presence of uninsulated
dangerous voltage
within the
product's
enclo-
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
sure
The exclamation
triangle
point
within
an
is intended to alert the
equilateral
user
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
This
is
appliance
supplied
with
BS1363
a
approved
3
amp fused mains plug. When replacing the fuse always
use a 3 amp BS1362 approved type. Never use this
plug
with the fuse
ment fuse
cover
omitted. To obtain
contact your
cover
supplying
a
replace-
dealer
or
"LG
ELECTRONICS U.K.LTD"
If the mains sockets in your home differ, or are not suitable for the type of plug supplied, then the plug should
be removed and a suitable type fitted. Please refer to
the wiring instructions below:
WARNING
Warning: The mains plug severed from the mains lead
of this appliance must be destroyed. A mains plug with
bared wires is hazardous if engaged in a mains output
TO REDUCE THE RISK OF FIRE OF ELECTRIC
line socket.
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
IMPORTANT
RAIN OR MOISTURE.
The wires in this mains lead
To avoid electrical shock, do not open the cabinet,
Refer servicing to qualified personnel only.
dance with the
CAUTION
are
coloured in
accor-
codes:
Blue
:
Neutral
Brown
:
Live
As the colour of the wires in the mains lead of this
Use of controls
procedures
following
or
adjustments or performance of
specified herein may
other than those
result in hazardous radiation exposure.
appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to
The
apparatus
splashing
such
as
shall not be
and that
exposed
dripping
objects filled with liquids,
be placed on the apparatus.
to
or
no
vases, shall
Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.
the terminal which is marked with the letter N
or
coloured black.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter L
or
coloured red.
If
a
13 amp BS1363
plug
or
any other type of plug is
must be fitted
used, 3 amp BS1362 approved fuse
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
VARNING:OSYNLIG LASERSTRALNING NAR
DENNA DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand l'appareil est ouvert, ne pas
s'exposer aux radiations invisibles du faisceau laser.
Do not install this
book
2
case or
equipment
similar unit.
in
a
confined space such
plug
or
at the distribution board.
Warning:
Do not connect either wire to the earth
with the letter E
coloured green
This
Warning:
a
either in the
product
or
pin,
symbol
yellow.
with the earth
or
green and
is manufactured to
radio interference
requirements
comply
marked
or
with the
of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
Table of Contents
INTRODUCTION
OPERATION
Precautions...........................2
Presettingtheradiostations.
TableofContents......................3
Listeningtotheradio..................11
BeforeUse...........................4
TapePlayback........................12
BasicPlayback......................12
ToStopPlay........................12
TapeCounterReset..................12
.12
ToPlayRewindorFastForward.
SafetyPrecautions....................4
NotesonDiscs......................4
NotesonRemoteControl...............4
NotesonTapes......................4
FrontPanel/RearPanel.................5
RemoteControl........................6
DisplayWindow........................6
Connections..........................7
SpeakerSystemConnection.
Antenna(Aerial)Connections.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.7
.7
BEFORE OPERATION
AudioAdjustment....................8-9
.8
Settingthevoltage(OPTIONAL).
SettingtheCLOCK...................8
VolumeAdjustment...................8
SoundQualityAdjustment..............8
SleepFunction.......................8
.
.
.
.
.
.
.
.
MUTE.............................8
SURROUND........................8
XDSS
(Extreme Dynamic
Sound
System)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.11
.
Recording...........................12
BasicSetting.......................12
Recording from Radio, CD or Auxiliary
source............................12
CD to
Tape Synchronized Recording
.
.
.
.
.
12
CDPlayback.........................13
BasicPlayback......................13
ToPausePlay......................13
ToStopPlay........................13
ToSkiptheTrack....................13
ToSearchtheTrack..................13
ToRepeatPlay......................13
ToProgramPlay....................13
REFERENCE
Troubleshooting......................14
Specifications........................15
8
TimerFunction...........................9
About the
symbols
for instructions
AuxiliaryFunction......................9
Indicates hazards
RDSFunction-OPTIONAL..............10
unit itself
or
Indicates
special operating
AboutRDS.........................10
ProgrammeSearch(PTY).............10
likely
to
other material
cause
harm to the
damage.
features of this
unit.
Indicates
tips
and hints for
making
the task
easier.
3
INTRODUC
Before Use
Precautions
Safety
Handling
When
Notes
the unit
shipping
on
Remote Control
remote
remote
such
liquids,
the unit. Do not leave rubber
near
contact with the unit for
They
will leave marks
Cleaning
or
plastic products
long period
a
on
insecticide spray,
as
and press
in
(7 m)
from the front of the
sensor.
About 30° in each direction of the front of the
Angle:
volatile
About 23 ft
Distance:
keep the surface clean
use
sensor
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Do not
Operation Range
Point the remote control at the remote
the unit
The
To
Remote Control
Remote control
of time.
sensor.
battery
Detach the
the surface.
installation
battery
cover on
the
rear
of the remote control, and insert two
R03
the unit
(size AAA)
and
batteries with
aligned correctly.
To clean the cabinet
Use
a
soft, dry cloth. If the surfaces
soft cloth
use a
lightly
solution. Do not
benzine,
or
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
alcohol,
the surface
discs
Do not touch the
Hold the disc
on
Notes
Discs
on
Handling
get
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
of the unit.
Notes
Caution
Do not mix old and
by
playback
edges
side of the disc.
the
so
that
fingerprints
will not
the surface.
Do not stick paper
on
Tapes
Preventing
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
or
tape
on
the disc.
Tab for side A
Tab for side B
Storing
After
discs
playing,
store the disc in its
To record
case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
as there may be
increase inside the car.
sunlight,
Cleaning
a
cover
the hole of the tab with adhesive
considerable temperature
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for
4
again,
tape.
analog
records.
Adhesive tape.
Front Panel/Rear Panel
13
1
INTRODUC
12
23
14
11
10
OPTIONAL
ANTENNA
AM
4
GND
9
5
FM
6
AUX
7
15
8
16
18 17
1.
CD DOOR
2.
DISPLAY
9.
3.
POWER
4.
?
XDSS button
?
SURROUND button
?
RDS button
?
SET
?
CD PAUSE
?
COUNTER RESET button
5.
(
STANDBY/ON)
:
button
10.
11.
OPTIONAL
(CD
button
)
?
CD SYNC. button
?
PROG./MEMORY button
?
MODE/RIF button
?
PLAY MODE button
?
EQUALIZER
:
(COUNTER)
:
OPTIONAL
HEADPHONE SOCKET
7.
?
?
?
CLOCK button
TIMER button
12.
REMOTE SENSOR
13.
CD OPEN/CLOSE () button
14.
ANTENNA TERMINAL
15.
AUXILIARY INPUT SOCKET
16.
SPEAKER TERMINAL
17.
VOLTAGE SELECT SWITCH
18.
POWER CORD
:
OPTIONAL
button
(EQ)
6.
?
-DECK
FUNCTION SELECT button
?
button
(CLOCK/ TIMER)
(
3.5mm
PHONES):
RECORD/ RECORD PAUSE
TUNING
position
VOLUME CONTROL KNOB
(TUNER/BAND, CD, TAPE, AUX)
OPTIONAL
?
PUSH EJECT
8.
(
)
button
button
(-/+)
CD SKIP/SEARCH
/
(
)
button
TAPE REWIND/FAST FORWARD
(
/
?
PRESET
(-/+)
?
BACKWARD PLAY
?
PLAY
?
STOP
?
CLEAR button
(
button
)
(
)
button
)
button
(
button
(TUNER)
)
button
(TAPE):
OPTIONAL
(TAPE, CD)
(TAPE, CD)
5
Remote Control
1.
1
X
2345
XDSS button
2.
POWER button
3.
TUNER/ BAND button
13
4.
AUX button
12
5.
PRESET
6.
CD FUNCTION buttons
11
10
9
6
7.
8
)
button
?
PLAY/ PAUSE
(
?
CD
button
?
CD SKIP/SEARCH
?
REPEAT button
STOP(
)
/
(
)
?
RECORD/ RECORD PAUSE button
?
BACKWARD PLAY button
?
FORWARD PLAY
(
?
FAST FORWARD
?
REWIND
(
(
)
:
(
(
)
(
button
)
button
)
SLEEP button
9.
PROGRAM button
10. VOLUME CONTROL
(
)
EQUALIZER PATTERN
button
(EQ PATT.)
button
12. MUTE button
13. SURROUND
button
(SURR.)
Display Window
34
2
5
679
8
XDSS
TIMER
SLEEP
MUTE
REC
SYNC
PROG.
10
MEMORY
11
STEREO
RDS
12
REPEAT
1 ALL
13
14
15
RC
RT PTY
1
kHz
MHz
16
1.
MUTE indicator
2.
CD PLAY/ PAUSE indicator
3.
XDSS
4.
TIMER indicator
13. RECORD/ RECORD PAUSE indicator
5.
CD SYNCHRO RECORDING indicator
14. TAPE PLAY DIRECTION indicator
6.
SLEEP indicator
15. PLAY MODE indicator
7.
PROGRAM indicator
16.
8.
MEMORY indicator
9.
RDS indicator
6
(Extreme Dynamic
10. FM STEREO indicator
Sound
(OPTIONAL)
11.
System)
indicator
button
RT, PTY indicator
12. CD REPEAT indicator
(OPTIONAL)
?
VOLUME indicator
?
SOUND LEVEL METER
)
OPTIONAL
button
)
TAPE STOP button
8.
11.
button
)
TAPE FUNCTION buttons
?
7
(
Connections
Speaker System
Connect the
Connection
speakers using the supplied speaker cords by matching the colors of the terminals and those
possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
cords. To obtain the best
INTRODUC
AUX
red
black
red
Right speaker
Left
speaker
otes
?
Be
sure
to match the
If the cords
are
speaker cord to the appropriate terminal on the components:
reversed, the sound will be distorted and will lack base.
?
If you use front
the speakers.
?
Do not disassemble the front
speakers
with low maximum
cover
of
input rating, adjust
the volume
+
carefully
to
+
and
--
to
--.
to avoid excessive
output
on
supplied speaker.
Antenna
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
FM external
antenna
(aerial)
(not supplied)
FM indoor antenna
(aerial)
AM
loop antenna (aerial)
(Supplied)
Position it for
the best
AM
(MW) loop
(aerial)
(Supplied)
FM external
antenna
antenna
(aerial)
(not supplied)
reception
75 ohms
coaxial
cable
For AM
AM
the
(MW) reception, connect
loop antenna (aerial) to the
terminal marked AM
FM 75
AM
FM
FM wire antenna
(supplied)
otes
?
?
?
To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
Be sure to fully extend the FM wire antenna.
After
connecting
the FM wire antenna,
keep
it
as
horizontal
as
possible.
7
Audio
Adjustment
the
Setting
voltage (OPTIONAL)
the CLOCK
Setting
When the
(If the
clock
CLOCK for
-
1
a
pressing
and hold
more
The hours
Select
2
requires setting, press
than 2 seconds.)
begin to flash.
24 hour
cycle or
(-)/(+).
sleep
timer is used, the power is automatically
specified time has elapsed.
turned off after the
Press CLOCK.
1
Function
Sleep
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.
To
specify the time delay before the power is
turned off, press SLEEP.
In the display window you can see
for about 5 seconds. This means that the system
turns off automatically after 90 minutes.
Each time the button is
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
12 hour
80...70... etc.
cycle by
Select the desired time to turn off.
PRESET
2
To check the
remaining
time until the power is
turned off.
While the
(12HR)
3
Press SET to confirm the selected hour
4
Use PRESET
5
Press SET.
6
Use PRESET
7
8
cycle.
(-)/(+)
to set the correct hours.
(-)/(+)
to set the correct minutes.
Press SET and the correct time is shown
the
SLEEP
display
the time
for about 3 seconds.
once
again
while SLEEP 10 is
displayed.
Press MUTE to mute your unit.
can mute your unit in order, for
Adjustment
telephone,
example,
to
"MUTE" indicator flashes in the
answer
display
window.
Tu r n VOLUME CONTROL KNOB clockwise to
or
counterclockwise to
(
)
to increase the sound
press the VOLUME CONTROL
decrease it on the remote control.
or
Sound
(
)
to
can
Dynamic Sound System)
Press XDSS to reinforce treble and bass.
The "XDSS ON"
To cancel it press XDSS
button
on
the remote control
impressions.
by using EQ PATT.
or
EQ button
on
the
panel.
FLAT
:
ROCK
: more
POP
:
bass, more treble
less bass, less treble
CLASSIC
:
for orchestral music
Headphone
linear
frequency
response
Socket
headphone plug ( 3.5mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
8
SURROUND ON
desired sound mode
a
Connect
↔
choose between 4 fixed sound
Select
front
Press SURROUND to reinforce surround effect.
SURROUND OFF
XDSS (Extreme
Quality Adjustment
To activate stereo sound
You
SURROUND
To activate surround mode
Press VOLUME CONTROL
level,
?
displayed,
timer mode
You
the
increase the sound level,
?
time is
MUTE
Press CLOCK at any time to
decrease it.
?
sleep
sleep
If you wish to stop the function, press the SLEEP button
repeatedly until SLEEP 10 appears, and then press
on
display.
press SLEEP
turns off is
ote
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
Volume
?
sleep function is active
briefly. The time remaining until it
displayed for about 5 seconds.
(24HR)
or
a
stereo
or
"XDSS OFF" indicator
again.
lights
up.
Audio
Adjustment
Timer Function
The unit
can
set the clock function in power on/off state.
With the TIMER function you can have the radio receprecording, CD play, tape play or auxiliary
tion and
and
play
source
recording
turned
on
and off at the time
desired.
Press CLOCK to check the current time.
1
6
Press SET to confirm the hour to switch
7
Set the minute to switch
PRESET
2
TUNER-CD-TAPE flashes in the
setting mode.
display window
in turn.
For your reference
If you want to correct the
previous
press and hold the TIMER button
seconds.
The
previous
memorized timer
indicators appear in the
3
4
on
more
than 2
time and TIMER
display.
Press SET when the desired function is
flashing.
1.
a.
When you select the TUNER function,
'PLAY' and 'REC' indicator flash in
the
display
window
alternately
for
about 3 seconds.
b.
'PLAY' indicator
:
TUNER
'REC' indicator
:
TUNER
play only
play and
recording
Select the previous memorized preset
number with PRESET (-)/(+) button and
press SET.
-
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
seconds in the
disappears.
-
display
window and then
Set the hour to switch
PRESET
Connect
Set the hour to switch off
10
Press SET to confirm the hour to switch off.
11
Set the minute to switch off
12
Press SET.
13
Adjust
PRESET
on
by pressing
(-)/(+).
PRESET
the volume level
PRESET
14
Press SET.
Switch the system off.
The selected function is
on
automatically
switched
and off at the time set.
To cancel
or
check the timer
Each time the TIMER button is
or
cancel. You
can
you can select
also check the timer
pressed
status.
To activate
button
by pressing
(-)/(+).
"TIMER" appears in the display window and the
timer setting has been completed.
15
setting
by pressing
(-)/(+).
so
or
that
check the timer, press the TIMER
"TIMER" appears in the display window.
so
that
by pressing
(-)/(+).
Auxiliary
1
2
9
To cancel the TIMER, press the TIMER button
"TIMER" disappears in the display window.
disappears.
5
disappears.
the timer set
2. When you select the CD or TAPE function,
'ON TIME' indicator appears for about 0.5
seconds in the
'OFF TIME' indicator appears for about 0.5
display window and then
on.
memorized TIMER
setting,
-
by pressing
on
(-)/(+).
Press SET to confirm the minute to switch
8
For your reference
If you don't set clock, timer function doesn't work.
Press TIMER to enter the timer
on.
an
Function
auxiliary
device i.e. TV
or
VCR, via the
rear
mounted AUX
Press AUX.
phone
sockets.
ote
You
can
also record from the
Recording
auxiliary input
source,
see
Section.
9
BEFORPATIN
RDS Function
-
OPTIONAL
About RDS
Programme Search (PTY)
This unit is
A
which
casts with
equipped with RDS (Radio Data System),
brings a wide range of information to FM radio.
Now in
use
in many countries, RDS is
a
system for
the
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS
Tuning
When
ability to encode broadProgramme Type (PTY) codes that indicate
type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
NEWS
News
AFFAIRS
Current Affairs
INFO
Information
SPORT
Sports
FM station is tuned in and it contains RDS data,
the unit will automatically display the station's call sign
EDUCATE
Educational
DRAMA
Drama
and the RDS indicator will
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
well
a
as
(PTY),
ices programme
RDS
light
in the
Display
Window
as
indicators for the programme type recognition
Radio Text (RT), Clock Time (CT) and RDS serv-
(PS)
if transmitted
by
the station.
Display Options
of the PTY.
explanation
Speech Programme
Music
EASY M
Easy Listening
The RDS system is capable of transmitting a wide variety of information in addition to the initial call sign that
LIGHT M
Classical Music
CLASSICS
Serious Classical Music
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
OTHER M
Other Music
WEATHER
Weather Information
broadcast network
front
or
call letters.
enables you to cycle
data types in the sequence:
panel
Pressing RDS on the
through the various
PTY
RT
FREQUENCY
CT)
(Programme type recognition)- The name of
the programme type is shown in the Display Window.
RT (Radio text recognition)- The name of the radio
text is shown in the Display Window.
CT (Time controlled by the channel)- Enables the
(PS
PTY
unit to receive the actual time and show it in the
Display Window.
PS (Programme
Service
channel is shown in the
name)- The name
Display Window.
of the
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for the
selected mode is not
Window will show
a
being transmitted, the Display
PTY NONE, RT NONE, CT
NONE, PS NONE message.
Music
FINANCE
Financial
CHILDREN
Children
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
PHONE IN
Phone-In
Programmes
TRAVEL
Travel and
Programmes
Programmes
s
Touring
LEISURE
Leisure and
JAZZ
Jazz Music
COUNTRY
Country
Programmes
Hobby
Music
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
You may search for a
these steps:
Message
Broadcast Information
specific Programme Type (PTY) by
following
1
2
Press TUNER/BAND to select FM mode.
Select
a
TUNING
desired station
by pressing
(-)/(+).
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
Press the RDS to select PTY mode.
To search for
4 (-)/(+)
to scroll
5
a
different PTY, press the PRESET
use is still displayed
while the last PTY in
through
When the PTY is
/
the list of available PTY types.
selected, press the
within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
10
that matches the desired PTY type.
Presetting
You
the radio stations
preset 30 stations for FM and AM. Before
can
make
5
that you have turned down the
volume to the minimum.
tuning,
sure
Press TUNER/BAND to select the
1
FM) you want.
time you press this
(AM
Every
changes alternately.
6
frequency
or
2
button, AM and FM
(-)/(+)
the
indication starts
in
on
panel until
to change.
automatically
a
preset number will flash. To change the preset number,
repeatedly.
To recall
presets
Press and hold PRESET
Press PROG./MEMORY
on
panel
follow the steps 4-5.
-
and
the front
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
TUNING(-)/(+) for more than 0.5 seconds.
Scanning stops when the unit tunes in a station.
Tuning in manually
TUNING(-)/(+) briefly
on
for about two seconds, "CLEAR" appears in the display
window and then press CLEAR, the stations are cleared.
the front
Press
Press
2 to 5 to store other stations.
Repeat steps
To clear all the memorized stations
otes
Tuning
again.
The station is stored.
Press and hold PROG./MEMORY
Press TUNING
frequency
Press PROG./MEMORY
-
the front
3
A preset number will flash in the
4
the remote
panel.
display window.
(-)/(+) (or
PRESET
(
)
the remote
control)
until the desired preset number
or
press it
repeatedly.
appears
on
Press PRESET
(-)/(+) (or PRESET (
) on
control) to select the preset number
you want.
Listening
1
to the radio
Press TUNER/BAND to select the
(AM or FM) you want.
Every time you press this button,
changes alternately.
To turn off the radio
frequency
Press POWER to turn the unit off
AM and FM
function mode
The last received station is tuned in.
(CD,
TAPE
For your reference
If an FM program is
?
2
Press PRESET
the remote
(-)/(+) (or PRESET (
) on
control) repeatedly to select the
preset station you
-
3
the volume
by rotating
UP KNOB (or pressing VOLUME (
remote control) repeatedly.
To listen to
?
?
Use manual
the front
)
on
or
automatic
tuning,
panel.
in step 2.
press and hold TUNING
select another
so
noisy
that "STEREO"
restore the stereo effect.
?
To
improve reception
Reposition the supplied
antennas.
the
otes
Use MODE/RIF
non-preset radio stations
For automatic
on
VOLUME DOWN/
or
AUX).
disappears in the
display window. There will be no stereo effect, but the
reception will improve. Press MODE/RIF again to
want.
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust
Press MODE/RIF
or
switch to
tuning
(-)/(+)
ed
by
When
mono
(Radio Interference Filter) function to
reception if stereo reception is distort-
noise.
recording
noises may
the
occur.
MW(AM)
or
LW broadcast, beat
If it does, press MODE/RIF
once.
11
OPERATION
Tape Playback
You
can use
Basic
1
2
normal tape.
only
To
Playback
Play
Press TAPE to select
After
("NO
or
/
or
stop.
tape function.
TAPE" appears in the display window.)
Open
cassette deck
PUSH EJECT
by pushing
position.
4
Press PLAY
)
To
Stop Play
plays only
STOP(
can
pressing
OPTIONAL).
select direction of the cassette you want
PLAY MODE.
Function
plays front or reverse
(backward play) side, stops automatically.
) during playback.
Press COUNTER
playback.
Playing time
After the cassette
Twice
Reset
reverse
RESET(COUNTER) during
-
0000" in
display
plays
front and
side, stops automatically.
After the cassette
plays six times
repeatedly front and reverse side,
stops automatically.
Three
times
appears "TP
by
After the cassette
Once
Tape Counter
front side, the unit stops
AUTO REVERSE DECK:OPTIONAL
Pressing Display
Press
the front panel
during playback,
on
the remote control
automatically.
You
:
/
After auto stop deck
Insert a cassette with the tape side to the
bottom and then close deck.
or
one
Fast Forward
or
AUTO STOP DECK
3
(
Rewind
pressing (
window.
Recording
Wind the tape to the
Basic
1
point recording
starts.
(Use only
normal
tapes.)
To pause
Setting
Select the function
(CD, TUNER/BAND
or
AUX)
Press
"
REC"
-
you want to record.
To
2
Open
the cassette deck and insert
cassette into the cassette
To set the
a
blank
recording
Recording
compartment.
recording direction :OPTIONAL
repeatedly to set the
CD to
direction.
from Radio, CD
or
Auxiliary
source
1
Press
on
the front
panel
or
Tape Synchronized Recording
a
complete
and
a
cassette.
1
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in
"
REC" flashes and
CD
stop mode.
""
displays
in the
window.
or
AUX
2
The
synchronized recording is started
automatically after about 8 seconds.
REC" flashes and holds the cassette in pause
Press
otes
or
PLAY(
the remote control.
The
12
).
the remote
mode.
2
STOP(
The CD
display
control and then select the CD, TUNER
function.
"
stop recording
Press TAPE
Press PLAY MODE
recording
during recording.
flashes in display window.
recording begins.
)
on
the front
panel
If you wish to record from the desired track, select the
or
desired track with CD SKIP/SEARCH
)
(/
commencing CD synchro recording.
change is not possible during recording.
before
The function
CD
Playback
Basic
Playback
Press CD to select CD function.
1
If
no
disc is loaded then "NO DISC" is
Press CD OPEN/CLOSE
2
(
)
and
Program Play
You
can
the disc
ote
disc, put it onto the inner circle
8cm(3 inch)
an
of the tray.
Press CD OPEN/CLOSE
3
(
)
1
2
3
to close the disc
4
PAUSE
To Pause
(
(
)
)
on
the front
on
panel
or
PLAY/
Press this button
(CD ) or PLAY/ PAUSE (
during playback.
)
again
it to
resume
STOP(
)
STOP(
Repeat
1~3.
5
Press PLAY
PAUSE
(
(
)
)
on
on
PROGRAM
the
on
to select the track.
(or
PROGRAM
the front
panel
or
the
on
PLAY/
the remote control.
Press PROG./MEMORY
(or
PROGRAM
the stop mode.
A track and program number will be
on
the remote
on
displayed.
To clear program contents
the front
on
panel
or
CD
STOP(
)
Press PROG./MEMORY
control)
the front
) during playback.
1.
?
Press the CD SKIP/SEARCH
?
When the CD SKIP/SEARCH
(/
)
(or
PROGRAM
on
the remote
the stop mode. And then press CLEAR
panel
or
STOP(
)
on
the remote control.
on
(/
midway through
Press PROG./MEMORY
remote
(or PROGRAM on the
control) repeatedly on the program stop
mode until "Track Number" blinks.
button to go to the next track.
button is
on
To add program contents
the Track
Skip
(or
the stop mode.
Press PROG./MEMORY
control)
play.
the remote control.
To
contain up
To check program contents
on
Stop Play
Press
on
Press(/)
4
-
Press
control)
control).
the remote control.
the remote control
on
the discs and
Play
Press CD PAUSE
To
Press PROG./MEMORY
remote
remote
compartment.
Press PLAY
on
can
to 20 tracks.
into the disc tray.
To load
arrange the order of the tracks
own program. The program
create your
displayed.
place
To
)
track,
a
pressed once
the player returns to the start of that track. When it
is pressed again, a track is skipped each time the
button is pressed.
To Search the Track
Repeat
To
modify program
1.
Press the PROG./MEMORY
2.
control)
to modify.
Repeat 2~4.
remote
2~5.
to
contents
display
(or
PROGRAM
on
the
program number you want
After
or
the remote control
(
To
To
) on the front panel
pressing (/
during playback, press PLAY
) at the point you want.
2.
Repeat Play
play
one
track
Press REPEAT
-
ote
In addition, this unit can
contains audio titles.
play
a
CD-R
or
CD-RW that
repeatedly
once
during playback.
display.
"REPEAT 1" appears in the
To
play
all tracks
repeatedly
Press REPEAT
-
again during playback.
ALL" appears in the display.
"REPEAT
To cancel
repeat play
Press REPEAT
-
"Repeat
once more
indicator"
during playback.
disappears.
13
OPERATION
Troubleshooting
Check the
for the
following guide
possible
cause
of
a
problem
Cause
Symptom
?
The power cord is disconnected.
?
No sound.
?
The audio cables
?
connected
?
start
playback.
not
are
securely.
No disc
?
An
or
disc
unplayable
source
Plug the power cord into the wall
outlet securely.
Connect the audio cable into the
tape
or
?
Switch
is
?
Insert
a
disc
?
Insert
a
playable
inserted.
?
The disc is
placed upside
the external
on
source
equipment.
is inserted.
tape
service.
jacks securely.
The power of the external
equipment is switched off.
?
contacting
Correction
No power.
The unit does not
before
down.
?
or
tape.
disc
or
Place the disc with the
tape.
playback
side down.
?
The disc is not
placed
within the
?
The remote control
?
The disc is
?
The remote control is not
properly.
dirty.
at the remote
does not work
?
sensor
pointed
There is
an
obstacle in the
tray
guide.
Clean the disc.
Point the remote control at the
remote
?
sensor
Operate
of the unit.
the remote control
within about 23 ft
path
the disc
?
of the unit.
The remote control is too far
on
inside the
?
from the unit.
?
Place the disc
correctly
guide.
?
(7 m).
Remove the obstacle.
of the remote control and the
unit.
?
The batteries in the remote
control
14
are
exhausted.
?
Replace
ones.
the batteries with
new
Specifications
MODEL
SECTION
[Genral]
Power
supply
Power
consumption
External dimensions
[CD]
FM
[Tuner]
(MW)
(WxHxD)
65W
4.60kg
-
65 dB
70 dB
70 dB
70 dB
70 dB
18000 Hz
108.0 MHz
Tuning Range
Intermediate
10.7 MHz
to Noise Ratio
-
or
60/55 dB
-
74
MHz,
60/55 dB
Tuning Range
522-1611kHzor530-1610kHz
Intermediate
450 kHz
Frequency
to Noise Ratio
Signal
-
100
Frequency Response
+
10W
80 dB
80 dB
Frequency Response
250
-
(MTT -111, JIS-WTD)
(C-60)
8000Hz
43dB(P/B)/43dB(R/P)
Separation
50dB(P/B)/45dB(R/P)
Erase Ratio
55dB
(MTT-5511)
LXS-130
1
Type
Way
Frequency Response
Sound Pressure Level
Speaker
Way
2
Speaker
85-20000Hz
80-20000Hz
88 dB/W
87 dB/W
87 dB/W
Power
(1m)
159x248x165mm
1.62kg
subject
to
change
(1m)
20W
20W
are
Speaker
LXS-330
2
90-20000Hz
10W
(WxHxD)
Way
1
6Ω
Power
specifications
LXS-230
1
6Ω
Weight (1EA)
and
1
4Ω
Impedance
Designs
30W
70 dB
120sec
Net
+
0.15%
0.25%
Input
30W
40-25000Hz
F.F/REW Time
Net Dimensions
20W
0.15%
Wow Flutter
Max.
+
40-25000Hz
ratio
to Noise Ratio
20W
0.15%
Tape Speed
Input
60/55 dB
40-25000Hz
4.75cm/sec
Rated
108.0 MHz
1800 Hz
-
10W
T.H.D
Signal
-
35 dB
Power
Signal-to-noise
70 dB
87.5
10000 Hz
60
Channel
[Speakrs]
65
Frequency Response
Output
[TAPE]
50W
4.46kg
range
Frequency Response
[Amp]
35W
87.5
Signal
of the unit.
4.03kg
ratio
Frequency
panel
LX-330A/D/X
161 X 255 X 268mm
40
response
Signal-to-noise
Dynamic
LX-230A/D/X
Refer to the back
Mass
Frequency
AM
LX-130A/D/X
(1m)
30W
40W
60W
159x248x193mm
159x248x195mm
1.87kg
2.04kg
without notice.
15
REF NC
Technology
with the human touch
GUARANTEE
LG Electronics U.K. Ltd. will
1.
All
2.
The dealer
provide
the
following
services in order to
faulty components which fail due to defective manufacture
period of 12 months from the original date of purchase.
will be
expedite
this Guarantee.
replaced
free of
charge
for
a
(or his service agent) who sold the product will be reimbursed for any labour provided
repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
in the
PLEASE NOTE:
A. The dealer may restrict the guarantee to the
B.
The dealer is not
original purchaser.
to carry out service under
obliged
guarantee if unauthorized modifications
made to the apparatus, or if non standard components
apparatus is removed, defaced, misused, or altered.
are
used
or
are
if the serial number of the
C.
Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D.
We
respectfully point
exhausted
E.
Aerial
or worn
alignment
in
and
out that your dealer is not
obligated
to
replace
batteries if
they
become
use.
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
:
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
To obtain information
or
assistance:
Call 0870 607 5544
MODEL NO.*
*
Please
complete
SERIAL NO.*
for your
own
Monday-Friday 9.00am-4.30pm
DATE OF PURCHASE.*
record
In all cases of difficulty consult your LG dealer
from whom the product was purchased
-
LGEUK Website
(
P/NO
:
service website
3828R-A075G
:
:
www.lge.co.uk
www.lgelectronics.co.uk )
Download PDF

advertising