LG | PC12DAB | LG PC12DAB Owner’s Manual

W2_PC12_ENG_MFL40699321
PC12DAB (PC12 - UB)
P/NO : MFL40699321
iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
There is so much your Hi-Fi system can do
iPod DOCKING
Go to page 6
Lull me to sleep
and wake me up
Go to page 10
Play CDs and USB
Go to pages 6 & 9
Contents
Setting up (Back Panel)
About Player
About Remote control
Listening to CDs
iPod DOCKING
Listening to music from your portable player
Listening to the radio
Listening to the DAB
Connecting your portable USB player
Recording
Setting the Clock
Use your player as an alarm clock
Fall asleep while listening to your player
Mood Lighting
About MP3/WMA
Safety Precaution
Troubleshooting
Specifications
3
4
5
6
6
7
7
8
9
9
10
10
10
10
10
11
12
12
Record from a CD, radio
or portable to USB
Play from many
external devices
Go to page 9
Go to page 7
Listening to the Radio / DAB
Go to page 7 / 8
Portable CD player
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
2
EMOTIONAL AUDIO DEVICE ] USER GUIDE
MP3 player
Setting up (Back Panel)
Connect the DAB aerial
Rotate it clockwise to fit in the base. and
Place it to the place where strong signals are received.
Plug the AC power Cord into a wall socket
PHONES (Headphone jack)
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will switch
off the speakers.
a. Before connecting the AC power cord, check
whether the operating voltage of your unit is
identical with the voltage of your local power
supplied.
b. Connect one end of the AC power cord
(supplied) to the AC IN socket located at the
backside of your unit.
c. Plug the other end into the wall outlet.
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the battery
(size AAA) match those on the remote control.
EMOTIONAL AUDIO DEVICE ] USER GUIDE
3
About Player
ALARM (SNOOZE)
With the ALARM function you can turn CD play
and radio reception on at a desired time.
(see Use your player as an alarm clock)
CD slot loader
• Do not push a disc forcibly into the CD slot.
• Do not pull or push a disc while a disc is ejected.
• Press Z EJECT again to reinsert the disc after ejecting it.
Z EJECT
Ejects or inserts the CD from the slot loader.
CLOCK (SNOOZE)
For setting the clock and checking the time.
(see Setting the Clock)
-TUNING+ / .>
For storing radio stations.
(see Listening to the radio)
x MO./ST.
B/x
B
Starts or Stops playback.
z USB REC
z
Starts or pauses recording.
iPod DOCKING
VOLUME
Control the volume when using any
function.
FUNC/INPUT
Change the functions among FM,
DAB, CD, USB, PORTABLE,
IPOD.
1 /]]
1
Turn on or off.
DISPLAY WINDOW
4
EMOTIONAL AUDIO DEVICE ] USER GUIDE
About Remote control
Turn on or off
To change the functions
Change the functions among FM, DAB, CD, USB.
• Fall asleep while listening to your player
• Mood lighting
To change the INPUT functions
Change the functions among IPOD, PORTABLE.
• Listen to your tracks again and again
• Select another tracks (iPod Docking)
Search for a section within a track
Speed search for tracks
Skip to another track
Stops playback or recording
Starts or pauses playback
Temporarily stop the sound
Press the button again to return to the sound.
• Search for a folder of MP3/WMA files
When a CD containing MP3/WMA files in several
folders is being played, press FOLDER•PRESET to
select the folder you want to play.
VOLUME
Control the volume when using any function.
Sound quality adjustment
You can choose sound impressions.
Starts or pauses recording
DAB MODE SCAN/SORT
• Search radio stations by DAB radio type
• Changes the display information of DAB
channel
• Aligning the service names
• DAB band scaning
EMOTIONAL AUDIO DEVICE ] USER GUIDE
5
Listening to CDs
iPod DOCKING
You can listen to music by connecting
iPod to the player. Connect iPod to
“iPod DOCK” on the upper part of the
player.
Audio CD and MP3/WMA CD can be
played back in this player.
ON PLAYER
1. Insert the CD: The display will
show the total number of tracks
(files).
2. Select the CD function:
3. Start the CD playing:
4. To stop a CD playing:
ON REMOTE
Z EJECT
FUNC/INPUT
FUNCTION
x
B/x
B
x
B/x
B
B/[]
B
x ENTER
x
1. Select the iPod function:
2. “IPOD” displays:
3. Start the playing:
4. Before disconnecting the iPod,
change to any other function by
pressing:
5. Remove iPod:
ON PLAYER
ON REMOTE
FUNC/INPUT
INPUT
x
B/x
B
FUNC/INPUT
B/[]
B
INPUT
iPod DOCKING - more you can do
Listening to CDs - more you can do
Pause or restart an iPod
Pause or restart a CD
x on the player or B
Press B
B/x
B/[] on the remote control during playback.
Press this button again to resume play.
Press B
B /[] on the remote control during playback. Press this button again to
resume play.
Search for a section within a track
Search for a section within a track
Hold ./> on either the player or the remote control during playback.
Hold ./> on either the player or the remote control during playback.
Skip to another track
Skip to another track
Press ./> on either the player or the remote control.
Press ./> on either the player or the remote control.
Select another track
Speed search for tracks
Press MODE on the remote control, you can move to the previous list.
Press FOLDER•PRESET on the remote control, you can move to a desired
x ENTER on the remote control, you can confirm it.
item. Then, press x
NOTE :
• When the connection with iPod is not solid and the remaining battery is
not enough, the message “ERROR” is displayed.
• iPod is automatically charged when connected to the player.
Hold ./> on either the player or the remote control only in stop
status. Track skips continuously in turn.
Listen to your tracks again and again
Press MODE on the remote control repeatedly, the display changes in the
following order, RPT 1 - RPT ALL - RANDOM - OFF.
6
EMOTIONAL AUDIO DEVICE ] USER GUIDE
Listening to the radio - more you can do
Listening to music from your
portable player
Look for radio stations automatically
Press ./> on either the player or the remote control for more than 0.5
second. The tuner will scan automatically and stop when it finds a radio
station.
The player can be used to play the music
from many types of portable player.
Delete all the saved stations
x ENTER on the remote control for two seconds.
Press and hold x
x ENTER on the remote control to erase all the
“ERASE” shows. Press x
saved stations.
ON PLAYER
1. Connect the portable player by
plugging the unit into
PORTABLE IN on the side of the
player:
2. Turn the power on:
3. Select the PORTABLE function:
4. Turn the portable player on and
start it playing:
ON REMOTE
Improve poor FM reception
Press MO./ST. on the player or B
B/[] on the remote control. This will change
the tuner from stereo to mono and usually improve the reception.
Or connect the antenna securely.
1 /]]
1
FUNC/INPUT
1
1
INPUT
Listening to the radio
1. Select the FM:
2. Select the radio station:
3. To ‘save’ a radio station:
A preset number will show in the
display.
4. To select a ‘saved’ station:
5. To confirm press: Up to 30 radio
stations can be saved.
Choose a ‘preset number’ for a radio station
x ENTER, the
Select a station you want by pressing ./>. Press x
station flashes. Press FOLDER•PRESET on the remote control to select
x ENTER to save it.
the preset number you want. Press x
ON PLAYER
ON REMOTE
FUNC/INPUT
FUNCTION
./>
./>
x ENTER
x
See information about your radio stations - OPTIONAL
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS on the remote control several times to
view the information.
PTY - Programme Type, such as News, Sport, Jazz.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Programme Service name, the name of channel.
You can search the radio stations by programme type by pressing RDS.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and hold ./>. The tuner
will search automatically. When a station is found the search will stop.
FOLDER•PRESET
x ENTER
x
EMOTIONAL AUDIO DEVICE ] USER GUIDE
7
Selecting among Primary and Secondary broadcasting
Listening to the DAB
DAB (Digital Audio Broadcasting) is a new form of radio broadcasting
using digital signals rather than traditional analogue signals.
DAB provides listeners CD-like quality radio programs. DAB can carry
not only audio but also text.
1. Select the DAB function:
The frequency received first after
scanning DAB bands is broadcasted.
2. Select the DAB radio station:
ON PLAYER
ON REMOTE
FUNC.
FUNCTION
For the frequency on which secondary broadcasting channels exist, B
B blinks
after selection. Then, press B
B/[] to select the secondary broadcasting.
NOTES :
• Broadcasting may be interrupted or stopped while using it in a forest,
some places enclosed by buildings, or the places where reception sensitivity is weak.
About Ferrite Core
./>
./>
BB/[]
B/[]
B
3. Play the selected channel:
1
Listening to the DAB - more you can do
DAB mode
You can change the display information of the currently broadcasting DAB channel. Press DAB MODE on the remote control repeatedly, the display changes in
the following order, SERVICE → PTY NAME → FREQUENCY → DLS →
QUALITY → ENSEMBLE. Select a display mode and then press ./>, the
initials of the service name are displayed.
SERVICE - Displays the Name of Component for the current broadcast.
PTY NAME - Displays the Type of Component for the current broadcast.
FREQUENCY - Displays the frequency of Component for the current broadcast.
DLS - It displays the current Scroll of Component which is selected.
QUALITY - It displays the current strength of electric field of broadcasting which
it doing in Bar form.
ENSEMBLE - Displays the Ensemble of Component for the current broadcast.
Aligning the service names
Press SCAN/SORT on the remote control to display the sorting mode of DAB
broadcastings. Then, press the button once again to change the mode.
Default sort : The service names are aligned in a scanning order.
Name sort : The service names are aligned in an alphabetical order.
DAB scan
Press SCAN on the remote control for longer than 3 seconds, all of the DAB
bands are scanned. Then press it again, scanning will be canceled.
8
EMOTIONAL AUDIO DEVICE ] USER GUIDE
2
3
Be sure to attach the ferrite core to the Power
cord (for connecting to this unit).
How to attach the ferrite core.
1 Push the stopper [a] of the ferrite core to open.
2 Wind the Power cord once on the ferrite core.
3 Close the ferrite core until it clicks.
Recording
Connecting your portable
USB player
Record FM or PORTABLE source to USB
Connect USB to the player before recording.
The advantage of connecting your
portable USB player through the system’s
USB port is that the portable device can
be controlled from the system. Connect
the portable player to the system (not
supplied).
1. Select the USB function:
2. The display will show “READ”,
followed by the number of files
displayed:
3. Press:
4. Before disconnecting the
portable USB player, change to
any other function by pressing:
5. Remove the USB player:
1. Select a mode (PORTABLE or
FM) in which you want to
record:
2. Start the Recording:
3. To stop a Recording:
ON PLAYER
ON REMOTE
FUNC/INPUT
FUNCTION
x
B/x
B
FUNC/INPUT
B/[]
B
FUNCTION
or
INPUT
NOTES :
• Some portable devices are not compatible with this system.
• When various cards are connected to the Memory Card Reader, the first
detected card is recognized.
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the USB device might not
be recognized.
• A device using NTFS file system is not supported (Only the FAT (16/32)
file system is supported.).
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phones are not supported.
• This unit is not supported when the total number of files is 1000 or more.
• USB port of the unit can not be connected to PC. The unit can not be
used as a storage device.
• HDD type USBs may not work when power is not supported in it by itself.
ON PLAYER
ON REMOTE
FUNC/INPUT
FUNCTION
or
INPUT
REC
z REC
z
x
B /x
B
x ENTER
x
Record CD source to USB
You can record one desired track or all of the music tracks in CD to USB.
(The volume may not be adjusted to the Max limit during CD recording.)
1. Select the CD function:
2. Select the track:
3. Start the Recording:
4. To stop a Recording:
ON PLAYER
ON REMOTE
FUNC/INPUT
FUNCTION
./>
z REC
z
x
B /x
B
./>
REC
x ENTER
x
NOTES :
• Remove USB while recording, the recorded file may not be saved.
z REC (REC) for longer than 3 seconds, you can select bit rate.
• Press z
z REC (REC) again to select
Press ./> to select the bit rate and z
the recording speed. Press ./> to select a desired recording speed
z REC (REC) again to finish recording.
and z
1 x speed : You can listen to music while recording it.
2 x speed (Only 96kbps, 128kbps)
: You can just recording the music file. (Only Audio CD)
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes.
Be responsible
Respect copyrights
EMOTIONAL AUDIO DEVICE ] USER GUIDE
9
Fall asleep while listening to your player
Setting the Clock
ON PLAYER
1. Turn the power on:
2. Press for at least 2 seconds:
3. Choose from either: 12HR (for an am and pm
display) or 24HR (for a 24 hour display).
4. Confirm your selection:
5. Select the hours:
6. Press:
7. Select the minutes:
8. Press:
1]
1 /]
CLOCK
./>
CLOCK
./>
CLOCK
./>
CLOCK
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on SLP OFF, the display changes in the
following order, SLP 90 & dimmer ON -> SLP 80 & dimmer ON -> SLP 70
& dimmer ON -> SLP 60 & dimmer ON -> SLP 50 & dimmer ON -> SLP 40
& dimmer ON -> SLP 30 & dimmer ON -> SLP 20 & dimmer ON -> SLP 10
& dimmer ON -> SLP OFF & dimmer OFF.
Mood Lighting
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on LIGHT, the display changes in the following
order, L--1 -> L--2 -> L--OFF.
Use your player as an alarm clock
About MP3/WMA
Press and hold ALARM on the player for two seconds. Press ./>
repeatedly, the display changes in the following order, FM, DAB, CD, USB.
Press ALARM when the function you want to be woken by is showing.
Next, you set the time to get alarm activated. Use ./> to change the
hours and minutes and ALARM to save. Next, the volume (VOL) setting
display appears. Use ./> to change the volume and ALARM to save.
The clock icon shows that the alarm is set. Switch the system off. When
the system is turned off, you can check the time the alarm is set for by
pressing ALARM. You can also turn the alarm on and off by pressing
ALARM.
NOTES :
• If you don’t set clock, the alarm function doesn’t work.
• When any button is not pressed for longer than 5 minutes with the alarm
beeping, the alarm is automatically canceled.
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
SNOOZE function
This function wakes you up every 5 minutes if you do not turn off the
alarm. When alarm is on and you press CLOCK or ALARM, CD or USB is
changed into pause & mute. And tuner is on mute mode for 5 minutes and
then changed into play & mute off.
10
EMOTIONAL AUDIO DEVICE ] USER GUIDE
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar
unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and to protect it from over heating. The openings should be never be blocked by
placing the product on a bed, sofa, rug or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer's instruction has been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for
future reference. Should the unit require maintenance, contact an authorized service center. Use
of controls, adjustments or the performance of procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no
objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the product,
ensure that the plug is easily accessible.
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the
fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets
in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions
below:
WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol
or coloured green
or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue
must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured
brown must be connected to the terminal which is marked with the letter L or coloured red.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you purchased
the product.
This product is manufactured to comply with EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC.
European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-036-547-8940)
EMOTIONAL AUDIO DEVICE ] USER GUIDE
11
Troubleshooting
Symptom
Specifications
Cause
Correction
General
No power.
The power cord is not plugged in.
Check whether electricity failed.
No sound.
Check whether you select right
function.
Plug in the power cord.
Check the condition by operating
other electronic devices.
Press FUNC/INPUT (FUNCTION)
and check the selected function.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
CD
The unit does not
start playback.
Refer to the label attached on the
bottom of the unit.
Power consumption
Refer to the label attached on the
bottom of the unit.
Net Weight
2.45 kg
External dimensions (WxHxD) 332 x 165 x 248 mm
Operating temperature
5 oC to 35 oC
Operating humidity
5% to 85 %
Output Power
5W+5W
T.H.D
10 %
Frequency Response
200 - 18000 Hz
Signal-to-noise ratio
70 dB
Speakers
6ΩX2
Tuner
FM Tuning Range
RADIO
Radio stations
The antenna is positioned or
cannot be tuned in. connected poorly.
Connect the antenna securely.
DAB Tuning Range
DAB Bitrate Range
iPod
87.5 - 108.0 MHz or 65 - 74 MHz,
87.5 - 108.0 MHz
174 - 239 MHz
8 - 256 kbps
CD
iPod does not
work.
Check whether the player is
connected to the unit correctly.
Check whether ipod is fully
charged.
Connect it to the unit correctly.
Charge the ipod. iPod is automatically charged when connected to
the player.
Remote control
The remote control The remote control is not pointed
does not work
at the remote sensor of the unit.
properly.
The remote control is too far from
the unit.
There is an obstacle in the path of
the remote control and the unit.
The battery in the remote control is
exhausted.
Point the remote control at the
remote sensor of the unit.
Operate the remote control within
about 16 ft (5 m).
Remove the obstacle.
Replace the battery with new one.
Designs and specifications are subject to change without notice.
12
General
Power supply
EMOTIONAL AUDIO DEVICE ] USER GUIDE
Frequency response
Signal-to-noise ratio
Dynamic range
200 - 18000Hz
70 dB
60 dB
MEMO
EMOTIONAL AUDIO DEVICE ] USER GUIDE
13
MEMO
14
EMOTIONAL AUDIO DEVICE ] USER GUIDE
MEMO
EMOTIONAL AUDIO DEVICE ] USER GUIDE
15
sary.
you lose your receipt, your units be stolen, or should modifications be neces-
numbers and return it. This will enable LG to assist you in the future should
It is helpful to complete at least your name, address, phone, model & serial
*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
MODEL NO.*
Please complete for your own record
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
● Product Registration Card :
DERED AT THE TIME GUARANTEE SERVICE IS PROVED.
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURREN-
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
This guarantee does not affect your statutory rights.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
worn in use.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or
evidence of the date of purchase.
purchased. The dealer may, before carrying out service under guarantee, require a receipted account as
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally
apparatus is removed, defaced, misused, or altered.
apparatus, or if non standard components are used or if the serial number of the
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the
A. The dealer may restrict the guarantee to the original purchaser.
PLEASE NOTE:
relevant claims procedure.
must be made in accordance with the published scale of service charges and
repair of this LG equipment, for a period of 12 months from the original date of purchase. These claims
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the
12 months from the original date of purchase.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of
● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
GUARANTEE
Technology with the human touch
Download PDF