LG | OM4560 | LG OM4560 Owner’s Manual

OWNER’S MANUAL
MINI HI-FI
AUDIO
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
OM4560
*MFL69304470*
www.lg.com
Copyright © 2017 LG Electronics. All Rights Reserved
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain
.readily accessible
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
CAUTION: No naked flame sources, such as lighted candles,
should be placed on the apparatus.
1
Getting Started
Check the specification page of this owner’s manual
.to be certain of the current requirements
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your device, and if
its appearance indicates damage or deterioration,
unplug it, discontinue use of the device, and have
the cord replaced with an exact replacement part
by an authorized service center. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door,
or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
device.
3
4
1
Getting Started
Getting Started
Getting Started
5
1
Getting Started
6
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
8
Unique Features
8Accessories
9
Playable file Requirement
9
– Music file requirement
9
– Compatible USB Devices
9
– USB device requirement
10 Remote control
12 Front panel
13 Rear panel
2Connecting
14
14
14
15
15
Optional Equipment Connection
– AUX IN Connection
– AUX OUT Connection
– USB Connection
– Antenna Connection
3Operating
16
16
16
17
17
18
18
18
19
20
20
21
22
22
22
22
22
23
23
24
24
26
Basic Operations
– CD/USB Operations
– Auto Play
– Selecting a folder and
an MP3/WMA file
– Deleting an MP3/WMA file
Playback Effect
– AUTO DJ
Using BLUETOOTH® wireless technology
– Listening to music stored on the
BLUETOOTH devices
Using the Music Flow Bluetooth App
– Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
– Activate Bluetooth with “Music Flow
Bluetooth” App
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Seeing information about a Radio station
Sound adjustment
– Setting the sound mode
Advanced Operations
– Recording to USB
– Programmed Playback
Table of Contents
4Troubleshooting
27
27
27
Other Operations
– Turn off the sound temporarily
– Displaying file information
(ID3 TAG)
27 – DEMO
27 – Using Microphone
27 – VOICE CANCELLER
28 – KEY CHANGER
28 – LIGHTING
28 Setting the Clock
28 – Setting the Clock through “Music Flow
Bluetooth” App
29 – Using your player as an alarm clock
29 – Sleep Timer Setting
29 – Dimmer
30 Auto power down
30 – AUTO POWER On
31 – Auto function change
31 LG Sound Sync
32 WIRELESS PARTY LINK Connection
7
1
34Troubleshooting
5Appendix
35Maintenance
35 – Notes on Discs
35 – Handling the Unit
36 General specifications
37 Trademarks and Licenses
2
3
4
5
8
Getting Started
Unique Features
1
BLUETOOTH®
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music stored on your Bluetooth device.
AUTO DJ
Blends the end of one song into the beginning of
another for seamless playback.
Remote Control (1)
USB Direct Recording
Records music to your USB device.
Music Flow Bluetooth
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 20.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
FM Antenna (1)
Batteries (2)
Getting Started
9
Compatible USB Devices
Music file requirement
yy The USB function of this unit does not support all
USB devices.
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Maximum files : Data CD : 999 / USB : 2000
yy Maximum folders : Data CD : 99 / USB : 200
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy File extensions : “.mp3”/ “.wma”
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy CD-ROM file format : ISO 9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
yy This unit recognizes up to 2000 files.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
Playable file
Requirement
10 Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
VOL +/- : Adjusts speaker volume.
1
Getting Started
F (Function) : Selects the function and input source.
(Mute): Mutes the sound.
PRESET.FOLDER W/S :
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET.FOLDER W/
S to select the folder you want to play.
-- Chooses a preset number for a radio station.
PROGRAM/MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
-- Creates a programmed list you want to listen to.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 18)
DELETE :
-- Deletes MP3/WMA files. (USB only).
-- Deletes a song on the programmed list.
Replacement of battery
(R03
)
(R03)
Remove the battery cover on the rear of the Remote
Control, and insert two (size AAA) batteries with 4
and 5 matched correctly.
Getting Started
11
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your tracks/files repeatedly or
randomly.
0 to 9 numerical buttons : Selects numbered tracks,
files, or preset number.
TUNING-/+ : Selects the radio stations.
CLOCK : Sets a clock and checks a time.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
-- Searches for a section within a track/file.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
d/M (Play/Pause) :
VOICE CANCELLER : You can enjoy the function
while playing the music, by reducing singer vocal of
music in the various source.
-- Starts or pauses playback.
Z (Stop) :
SOUND EFFECT : Chooses sound impressions.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
REGION EQ : Chooses region equalizer.
RDS/SET :
INFO
-- RDS (Radio Data System) (Refer to the page 22.)
-- Sees informations about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-- Confirms the setting.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
USB REC : USB direct recording.
-- Stops playback or recording.
-- Cancels DELETE function.
-- In status of WIRELESS PARTY LINK Connection,
device name of SLAVE unit appears in the MASTER
unit and Device name of MASTER unit appears in
the SLAVE unit.
KEY CHANGER ( / ) : Changes the key to suit
your vocal range.
PTY : Searches radio stations by radio type.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
12 Getting Started
Front panel
a
b
c
d
e
f
g
h
1
Getting Started
a
b
1/! (Power) : Switches the unit ON or OFF.
e
MIC +/- : Adjusts Microphone volume.
f
USB Port : You can play or record sound files
by connecting the USB device.
g
Y/U
F / WIRELESS LINK :
-- Selects the function and input source.
: Opens and closes the disc tray.
-- Press and hold for 3 seconds to select
WIRELESS PARTY LINK mode.
-- Skips Fast backward or Forward.
REGION EQ / BASS BLAST
I/RDS
-- Searches for a section within a track/ file.
-- Chooses region equalizer.
-- Stops playback or cancels DELETE function.
-- Press and hold for 3 seconds to select
BASS (BASS BLAST) effect directly.
VOICE CANCELLER
You can enjoy the function while playing
the music, by reducing singer vocal of
music in the various source.
-- RDS (Radio Data System)
z
- Starts or pauses playback.
h
VOL +/- : Adjusts speaker volume.
LIGHTING / PARTY LINK
USB REC / DEMO
-- Turns on/off the lighting effects.
-- Records to USB.
-- Press and hold for 3 seconds to select
PARTY LINK mode.
-- Shows Demo mode
c
MIC : Connect a microphone.
d
Display window
Getting Started
13
Rear panel
a
b
c
1
Getting Started
aPower cord
bANTENNA (FM)
cAUX IN (L/R)
AUX OUT (L/R)
14 Connecting
Optional Equipment
Connection
AUX IN Connection
AUX OUT Connection
Connect an input of auxiliary device to the AUX OUT
(L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Auxiliary device
Red
Audio cable
Audio cable
White
PARTY LINK
DVD, Blu-ray player etc.
You can connect two units to play music together.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using Audio
cable.
2. Press and hold LIGHTING / PARTY LINK on the
unit for 3 seconds connected through AUX OUT
and then select LINK ON.
“LINK ON” appears in the display window and
change to “DELAY time” soon.
3.Press Y/U to adjust Delay setting.
When “LINK ON” and “DELAY time” are displayed
in the display window, you can adjust the delay
time.
4.Press LIGHTING / PARTY LINK to save the Delay
setting.
Connecting 15
,,Note
yy This function is available on CD, USB or
BT (Bluetooth) Function.
yy The initial Delay is 30 ms. If you want to
change the Delay time, press Y/U.
The connected device’s Delay may differ. If
Audio Sync is not matched, adjust Delay of
PARTY LINK to synchronize sound.
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
yy It is available to adjust the Delay from 0 ms to
200 ms. Synchronizing tempo is not available
depending on devices.
2
Connecting
yy Delay value is saved and PARTY LINK is
turned off when the unit turns off.
yy You can select LINK ON/LINK OFF mode by
pressing and holding LIGHTING / PARTY
LINK for 3 seconds on the unit.
yy VOICE CANCELLER setting is not
synchronized with MASTER unit.
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z on the remote control or
I/RDS on the unit twice in a row.
2. Remove the USB device from the unit.
,,Note
Be sure to fully extend the FM wire antenna.
16 Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B on the remote
control or on the unit
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
F / WIRELESS LINK.
To
3
Operating
Do this
Press Z on the remote control or
Stop
I/RDS on the unit.
Press d/M on the remote control or
Playback
z on the unit.
Press d/M on the remote control or
Pause
z on the unit during playback.
Searching Press C/V on the remote
for a section control or Y/U on the unit
within a track/ during playback and release it at the
file
point you want to listen to.
Selecting Press 0 to 9 numerical buttons on
a track/file the remote control to go to the
directly
desired file or track directly.
-- In stop status,
Press C/V on the remote
control or Y/U on the unit to
go to the next/previous track/file.
-- During Playback,
Skipping to
the next/
previous
track/file
Press V on the remote control or
U on the unit to go to the next
track/file.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous
track/file.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the track/file.
Playing
Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
,,Note
yy The display changes in the following order.
USB
MP3/WMA CD
AUDIO CD
RPT 1
RPT 1
RPT 1
RPT*DIR
RPT DIR
-
RPT ALL
RPT ALL
RPT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
*DIR : Directory
yy When you play the programmed list, only RPT
1 and RPT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Auto Play
-- AUDIO/MP3/WMA CD is played automatically
after Disc tray is open and then closed.
-- Automatically switches to the CD function if Disc
tray is open and then closed when there is no disc
in Disc tray.
Operating 17
Selecting a folder and
an MP3/WMA file
1.Press PRESET.FOLDER W/S on the remote
control repeatedly until a desired folder appears.
2.Press d/M to play it. The first file of folder will
play.
,,Note
yy CD / USB Folders/Files are recognized as
below.
*
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by pressing
PRESET.FOLDER W/S on the remote control
and press DELETE.
-Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press z on the unit.
If you want to exit the current mode, press
Z on the remote control or press I/RDS on
the unit.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
3
Operating
The display changes in the following order.
18 Operating
Playback Effect
Using BLUETOOTH®
wireless technology
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback. It
equalizes volume across tracks/files for uninterrupted
playback.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings. AUTO DJ RANDOM ->
AUTO DJ SEQUENTIAL -> AUTO DJ OFF
3
Operating
Mode
Display
Window
Description
OFF
AUTO DJ OFF
-
RANDOM
AUTO DJ
RANDOM
The music is played
randomly on this
mode.
AUTO DJ
SEQUENTIAL
The music is played
repeatedly on this
mode.
REPEAT
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using I/RDS on the unit (or Z on
the remote control) on AUTO DJ mode, AUTO
DJ will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy During recording, AUTO DJ is not available.
yy Only AUTO DJ SEQUENTIAL is selected when
played the programmed list.
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop, PDA.
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Codec : SBC
Operating 19
Listening to music stored on the
BLUETOOTH devices
Pairing your unit and Bluetooth device
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” will be appear
on the display window and change to Bluetooth
device name soon. Then “BT” will be appear on
the display window.
Before you start the pairing procedure, make sure the
Bluetooth feature is activated on your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
yy "PAIRED" will momentarily appear on the
display when you connect other devices for
multi pairing.
1. Select the Bluetooth function by using
F / WIRELESS LINK on the unit until BT function
is selected.
“BT READY” appears on the display window.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG
OM4560(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi pairing connection is only supported
on Android or iOS devices. (Multi pairing
connection may not be supported depending
on the connected device specifications.)
yy Removable/detachable Bluetooth devices (Ex:
Dongle etc.) will not support multi pairing.
yy You can connect only one Bluetooth device
in the MASTER unit. You cannot connect
Bluetooth device to the SLAVE unit.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy When using Bluetooth® technology, you have
to make a connection between the unit and
the bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below :
-- There is a obstacle between the unit and
the bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your bluetooth device to
this unit again when you restart it.
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
3
Operating
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG OM4560(XX)”.
,,Note
20 Operating
,,Note
yy When this unit connected with multiple
Bluetooth devices, only one device which you
are playing keeps Bluetooth connection when
you change the function to the others.
,,Note
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
yy Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
yy You may not control the Bluetooth device
with this unit.
yy It is recommended to use the latest version
of app.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
3
Using the Music Flow
Bluetooth App
Operating
yy The more distance between the unit and the
bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the BT function, adjust the
volume to a proper level on the Bluetooth
device.
yy If it is not in the BT function, only one device
can be connected.
About “Music Flow Bluetooth” App
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
Operating 21
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
2. Tap [Menu] and select the unit you want.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
,,Note
yy “Music Flow Bluetooth ” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth ” app for
operation, there would be some differences
between “Music Flow Bluetooth ” app and
the supplied remote control. Use the supplied
remote control as necessary.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth ” app may not work.
yy After connection of “Music Flow Bluetooth ”
app, music may be output from your device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth device
while using “Music Flow Bluetooth ” app,
“Music Flow Bluetooth ” app may operate
abnormally.
yy When “Music Flow Bluetooth ” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth ”
app and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth ” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth ” app
connection does not work well.
3
Operating
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
3. If you want to get more information to operate,
tap [Help] on the [Setting] menu.
22 Operating
Radio Operations
Be sure that FM antenna is connected.
(Refer to page 15)
Listening to the radio
3
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the
remote control for two seconds.
“ERASEALL” will flash up on the unit display.
2.Press PROGRAM/MEMORY on the remote
control to erase all the saved radio stations.
Operating
1.Press F / WIRELESS LINK repeatedly until FM
appears in the display window.
The last received station is tuned in.
Seeing information about a
Radio station
2. Auto tuning :
Press and hold TUNING-/+ on the remote control
or Y/U on the unit for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit tunes
in a station.
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control repeatedly to cycle through the
various data types:
Or
Manual tuning :
Press TUNING-/+ on the remote control or
Y/U on the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on the
unit or remote control repeatedly.
Presetting the Radio Stations
PS
The name of the channel will appear in
the display.
PTY
RT
3.Press PROGRAM/MEMORY on the remote
control. A preset number will blink in the display
window.
4.Press PRESET.FOLDER W/S on the remote
control to select the preset number you want.
5.Press PROGRAM/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
(Radio Text)
A text message contains special
information from the broadcast station.
Before tuning, make sure to turn down the volume.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or
Y/U on the unit.
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
You can preset 50 stations for FM.
1.Press F / WIRELESS LINK until FM appears in
the display window.
(Programme Service Name)
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme type
by pressing RDS/SET on the remote control. The
display will show the last PTY in use. Press PTY one
or more times to select your preferred programme
type. Press and hold C/V. The tuner will
search automatically. When a station is found the
search will stop.
Operating 23
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
fields. The displayed items for the Equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
On Display
BASS (BASS BLAST)
Reinforces the treble,
bass and surround
sound effect.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOT BALL
You can enjoy
the sound effect
FOOTBALL STADIUM.
STANDARD
You can enjoy
optimized sound.
On Display
Region
Description
FUNK, REGUETON,
SAMBA, BANDA,
MERENGUE, AXE, Latin
SALSA, SERTANEJ, America
CUMBIA, TECNO BR,
FORRO
ARABIC
DONGDUT
Optimized
sound effect
for the
Middle East music genre
prefered in
Indonesia
each region. .
AFRO
Africa
INDIA
India
,,Note
By pressing and holding
REGION EQ / BASS BLAST for 3 seconds on
the unit you can directly select BASS (BASS
BLAST) effect.
3
Operating
POP
CLASSIC
ROCK
JAZZ
Description
You can select a desired sound mode by using
REGION EQ on the remote control.
24 Operating
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, AUX, Tuner)
1. Connect the USB device to the unit.
2.Press F / WIRELESS LINK to select a function
you want to record.
3
Operating
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
Programmed list recording - After showing the
Programmed list, you can record it to USB.
(Refer to page 26)
3. Start the recording by pressing USB REC/DEMO.
4. To stop recording, press I/RDS on the unit or
Z on the remote control.
Pausing recording
During recording, press T on the unit or d/M on
the remote control to pause recording. Press it again
to restart recording.
(Tuner/AUX only)
,,Note
yy You can control recorded MIC sound according
to MIC volume when you record in AUDIO CD
X1 speed REC.
yy VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
yy VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
To select recording bit rate and speed
1. Press and hold USB REC/DEMO for 3 seconds.
2.Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3. Press USB REC/DEMO to set.
4.Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC/DEMO to finish the setting.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Operating 25
,,Note
yy You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/WMA, CD Only)
yy During recording MP3/WMA, there is no sound.
yy For stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
yy When you stop recording during playback, the
file that has been recorded at that time will
be stored. (Except MP3/WMA files)
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You can control recorded MIC sound according
to MIC volume.
yy You may not store more than 2000 files.
yy You can not record in AUTO DJ mode.
yy On CD function, sound of MIC is recorded only
during AUDIO CD X1 speed REC. It is recorded
AUDIO CD source too.
yy In case of the unsupported MP3/WMA file,
the file recording may be stopped.
yy It’ll be stored as follows.
AUDIO CD
MP3/WMA
3
AUX
Tuner
Tuner : The current recording frequency is shown.
Operating
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
,,Note
26 Operating
Programmed Playback
Deleting Programmed list
The program function enables you to store your
favorite files from any disc or USB device.
Deleting function only works in the edit mode.
A program can contain 20 tracks/files for each media.
(CD, USB) Possible to save a total of 40 tracks/files.
Making Programmed list
2. Select a song by pressing PROGRAM/MEMORY
or PRESET.FOLDER W/S on the remote control
repeatedly.
It is supported only on stop status.
3.Press DELETE while a song is selected.
1.Press PROGRAM/MEMORY on the remote
control.
2.Press C/V on the remote control to select
a track/file.
3
1.Press PROGRAM/MEMORY on the remote
control in stop status.
3.Press PROGRAM/MEMORY on the remote
control to save and select a next track/file.
Operating
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER W/S on the remote control to
select the program number.)
5.Press PROGRAM/MEMORY on the remote
control once again.
To play the programmed list, press d/M after you
make the list.
,,Note
When making or modifying the programmed list,
REPEAT mode is off.
,,Note
yy Program is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numeric buttons on the
remote control.
yy Programmed list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
-- Unplugging the Power Cord.
Operating 27
Other Operations
Turn off the sound temporarily
Press
on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
To cancel it, press
level.
again or change the volume
Displaying file information
(ID3 TAG)
DEMO
In the power off state, press USB REC/DEMO on
the unit once. The unit will power on and display the
each of functions in the display window. To cancel the
DEMO function, press USB REC/DEMO once more.
,,Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without input key in 10 sec, the DEMO will
play back automatically.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC +/- on the
unit.
,,Note
yy When not using the microphone, set the
microphone volume to minimum by pressing
MIC - or turn off the MIC and remove the
microphone from the MIC jack.
yy If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the MIC -.
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, set the
microphone volume to minimum by pressing
MIC -.
VOICE CANCELLER
You can enjoy the function while playing the music, by
reducing singer vocal of music in the various source.
Press the VOICE CANCELLER, and “ON” will appear
in display window.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy It is not available on the MONO source.
yy To initialize it, change the Function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
3
Operating
While playing an MP3 file containing file information,
you can display the information by pressing INFO.
Using Microphone
28 Operating
Setting the Clock
KEY CHANGER
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
1. Turn the unit on.
yy To sharp the key one by one, press the KEY
CHANGER( ) on the remote control repeatedly
during playback.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on the
remote control.
yy To flatten the key one by one, press the KEY
CHANGER( ) on the remote control repeatedly
during playback.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press RDS/SET to confirm your selection.
,,Note
5. Select the hours by pressing C/V on the
remote control.
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
3
Operating
yy To initialize it, change the Function, disconnect
the microphone or change the music.
yy This function may not be initialized depending
on the status of connected devices.
LIGHTING
The function is to create a Club like atmosphere by
operating speaker lighting.
1.Press LIGHTING / PARTY LINK on the unit.
The mode changes each time you press it :
OFF SPARKLE VOLCANO POLICE
THUNDER PSYCHE CAOS OFF
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING / PARTY
LINK, press again to change modes.
yy Operation may be different depending on the
played music, connected device or setting
status.
6.Press RDS/SET.
7. Select the minutes by pressing C/V on
the remote control.
8.Press RDS/SET.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 20)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Operating 29
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM.
3.Press C/V on the remote control to
change the hours and minutes and press
RDS/SET. to save.
4.Press C/V on the remote control to select
function and press RDS/SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner and
then, press RDS/SET.
If there is no memory No., this step is skipped.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you can
check the setting informaiton by pressing
ALARM even when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM.
Press SLEEP repeatedly to select delay time between
10 and 180 minutes. After the delay time, the unit
will be turned off.
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP
once again while “SLEEP 10” is displayed.
,,Note
yy You can check the remaining time before the
unit is turned off.
yy Press SLEEP. The remaining time appears in
the display window.
Dimmer
Press SLEEP once. The display window will be
darkened by half. To cancel it, press SLEEP repeatedly
until dim off.
,,Note
All the LED turns off when Dimmer is being
operated.
3
Operating
5.Press C/V on the remote control to
change the volume and press RDS/SET to save.
Sleep Timer Setting
30 Operating
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MASTER
unit in case of WIRELESS PARTY LINK connection.
In case of SLAVE unit, Auto power down is available
after disconnecting SLAVE unit and MASTER unit.
3
Operating
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
AUTO POWER On
This unit automatically turns on by an input source :
LG TV or Bluetooth
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device. You
can play your music.
,,Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an input
source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
Operating 31
Auto function change
This unit recognizes input signals such as Bluetooth
and LG TV and then changes suitable function
automatically.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
yy This function only works with devices that
were previously connected.
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing 1/!(Power).
2. Press F / WIRELESS LINK until LG TV function is
selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] -> [TV Sound output]
-> [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
3
Operating
,,Note
yy This function is not available during recording
or deleting.
LG Sound Sync
32 Operating
,,Note
yy You can also use the remote control of this
unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes
with the TV.
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when using
LG Sound Sync.
-- Turn off the unit.
-- Changing to a different function.
3
WIRELESS PARTY LINK
Connection
The output sound of (MASTER) unit is expanded
to (SLAVE) unit.
It is compatible with unit that supports
WIRELESS PARTY LINK.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
-- Disconnecting the wireless connection
caused by interference or a distance.
Operating
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV.
yy If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control
through the app is available.
yy If you turned off the unit directly by pressing
1/!(Power), LG Sound Sync will be
disconnected. To use this function again, you
should reconnect the TV and the unit.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and the
LG TV is connected.
1. Press and hold F / WIRELESS LINK on the
unit for 3 seconds. PARTY LINK MODE SELECT
appears in the display window.
2.Press Y/U on the unit to select MASTER or
SLAVE.
- unit : Selects MASTER.
-
unit : Selects SLAVE.
Two units try to connect with each other.
3. When this unit is successfully connected each
other, “Slave Device Name CONNECTED” appears
in the MASTER unit. “CONNECTED TO Master
Device Name” appears in the SLAVE unit and
change to SLAVE soon.
Operating 33
,,Note
yy If you using the LG Sound Sync, this function
is not available. If you connect the LG TV
Function, “NOT SUPPORT” appears in the
display window.
yy You can use microphone in the SLAVE unit
only. In case of SLAVE unit, some functions
are supported only.
yy Removable/detachable Bluetooth devices
(ex. Dongle etc.) will not support WIRELESS
PARTY LINK connection.
yy When WIRELESS PARTY LINK is connected,
Blutooth connection is not available in status
of recording or deleting.
3
Operating
yy You can connect only one Bluetooth device
in the MASTER unit. You cannot connect
Bluetooth device to the SLAVE unit.
yy When WIRELESS PARTY LINK is
disconnected, SLAVE unit is changed to BT
function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press and hold the F / WIRELESS LINK on the
unit for 3 seconds.
yy When WIRELESS PARTY LINK is connected,
you can not connect the PARTY LINK.
yy WIRELESS PARTY LINK connection is
only supported on Android or iOS devices.
(WIRELESS PARTY LINK connection may not
be supported depending on the connected
device specifications or OS.)
34 Troubleshooting
Troubleshooting
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
4
No Power.
yy The power cord is not plugged in. Plug in the power cord.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
No sound.
yy Check whether you select right function.
Press F / WIRELESS LINK and check the selected function.
Troubleshooting
The unit does not start
playback.
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to page 35)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 22 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
LG Sound Sync does not
work.
yy Check the speaker light effects by pressing LIGHTING / PARTY LINK.
yy Check whether your LG TV supports LG Sound Sync.
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
Appendix 35
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of
time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Maintaining the Unit
5
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
36 Appendix
General specifications
General
Power requirements
Refer to the main label.
Refer to the main label.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Approx. 451.5 mm x 311 mm x 302.5 mm
Net Weight (Approx.)
Approx. 7.5 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 90 %
Inputs / Outputs
Analog audio in (AUX IN)
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Analog audio out (AUX OUT)
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Microphone
Sensitivity 15 mV (1 kHz), 6.3 mm jack x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
5
Appendix
Amplifier (RMS Output power)
Total
220 W x 1 (3 Ω at 1 kHz, 25 % THD)
System
Frequency Response
80 Hz to 20 kHz
Signal-to-noise ratio
More than 75 dB (1 kHz)
Dynamic range
More than 80 dB
Bus Power Supply (USB)
5 V 0 500 mA
yy Design and specifications are subject to change without notice.
Appendix 37
Trademarks and Licenses
Bluetooth wireless technology is a system which allows radio contact between electronic devices.
Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone
with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth
wireless technology.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of their respective owners.
5
Appendix
Download PDF