P/NO : MFL42956128
FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL.
PC14DAB(PC14-UB)
PC14-UB.DGBRLL_ENG(UK)_6128
CAUTION
2
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center. Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Precaution
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-036-547-8940)
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Disposal of your old appliance
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock or
fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized service
center. Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
8
9
9
Listening to CDs
Using an iPod
Listening to music from your portable device
Enjoying a pre-programmed sound field
12
13
14
15
15
Setting the Clock
Using your unit as an alarm clock
Using an USB device
Recording to USB
Troubleshooting
Specifications
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
3
• Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards
• “Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance
standards.
POWER: This unit operates on a mains supply of 100 - 240V, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains
plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must
be destroyed. A mains plug with bared wires is hazardous if inserted in a
mains socket.
Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any
other plug is fitted, use a 5 amp fuse, either in the plug, or at the
distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance
with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the
mains lead of this unit may not correspond with the coloured marking
identifying the terminals in your plug, proceed as follows: The wire which
is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured
red.
iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
11
12
Listening to the DAB
10
7
Remote control
Listening to the radio
5
6
Main Unit
4
Hooking up the Unit
Contents
4
Place it to the place where
strong signals are received.
Connect the DAB aerial
Hooking up the Unit (Back Panel)
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.
PHONES (Headphone jack)
a. Before connecting the AC power
cord, check whether the operating
voltage of your unit is identical with
the voltage of your local power
supplied.
b. Connect one end of the AC power
cord (supplied) to the AC IN socket
located at the backside of your unit.
c. Plug the other end into the wall
outlet.
Plug the power Cord into a wall socket
B/x
x
Play/ Stop.
v/V
V)
VOL. (v
Control the volume when using any function.
TUN.-/+ / ./>
Scanning/ Tuning/ Searching
SNOOZE/SET
CD Slot
• Do not push a disc forcibly into the CD slot.
• Do not pull or push a disc while a disc is ejected.
• Press EJECT again to reinsert the disc after ejecting it.
• pick it to the CD slot with the label side toward.
USB REC.
Recording to USB.
USB Port
INPUT/FUNC.(function)
Selects the function.
CLOCK
(For setting the clock and checking the time.).
Main Unit
Front controls
Top controls
iPod Dock
5
EJECT
Ejects or inserts the CD from the slot loader.
FM ANT.
FM radio antenna
1 /]]
Turn on or off.
ALARM 1, 2
With the ALARM function you can turn CD, iPod, DAB,
USB play and radio reception on at a desired time.
(See use your unit as an alarm clock)
v
SLEEP
LIGHT
ALARM
F
1
• Control the volume when using any
function.
+
• Temporarily stop the sound
Press the button again to return to the
sound.
• Sound quality adjustment.
You can choose sound impressions
6
VOL
-
EQ
MUTE
•
PRESET
FOLDER
• Search for a folder of MP3/ WMA
Files.
When a CD containing MP3/ WMA
files in several folders is being played,
press FOLDER•PRESET to select the
folder you want to play.
• Choose a ‘preset number’ for a
radio station.
• Fall asleep while listening to your
unit.
• Dim the display light.
• You can wake up to music or a
radio program at a preset time.
• Changes the functions.
Change the functions among iPod,
PORTABLE, FM, DAB, CD, USB.
• Power on/ off
Remote control
v
Make sure that the + (plus) and - (minus) on the
battery (size AAA) match those on the remote
control.
Put the battery in the remote control
• Starts or pauses recording
• Search radio stations by DAB
radio type
• Aligning the service names
• DAB band scanning
PTY
SCAN/SORT
REC
• Search radio stations by DAB
radio type.
• Changes the display information
of DAB channel.
• Stops playback or recording
• Saves radio stations.
• Sets the alarm function
x
ENTER
RDS
DAB MODE
• Starts or pauses playback
• Selects the radio station.
• Search for a section within a track.
• Skips Fast backward or Forward.
• Listen to your tracks repeatedly or
randomly.
• Select another tracks. (iPod Docking)
B/X
X
CH
-/+
TUN
./>
REPEAT
MENU
F
B/X
X
x ENTER
B/x
x
B/x
x
Press REPEAT/MENU on the remote control repeatedly, the display
changes in the following order, RPT 1 - RPT ALL - RANDOM - OFF.
Listening to your tracks (files) repeatedly or randomly
Press bb / BB on the unit or ./> on the remote control in stop status.
Skipping to another track (files)
Hold bb / BB on the unit or ./> on the remote control during playback
and release it at the point you want to listen to.
Searching for a section within a track
1 Press B/[] during playback.
2 Press this button again to resume play.
Pausing or restarting a CD
ON REMOTE
INPUT/FUNC.
ON UNIT
Listening to CDs - more you can do
1. Insert the CD:
The display will show the total
number of tracks (files).
2. Select the CD function
3. Start the CD playing
4. To stop a CD playing
Listening to CDs
7
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
• Do not use special letters such as “/ : * ? “ < >”etc.
• If you record MP3/ WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
• CD-R physical format : ISO 9660/ JOEILT
• Bit rate : 32 - 320 kbps (MP3), 40 - 320 kbps (WMA)
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48 kHz (WMA)
About MP3/ WMA
• when you insert disc in the during play mode it plays the disc
automatically .
• This unit cannot be operated by 8cm disc. (Using 12cm disc only)
NOTE :
F
B/X
X
F
INPUT/FUNC.
B/x
x
INPUT/FUNC.
8
-
FOLDER •PRESET
Choose a item
Move to a desired item
Moves to the previous menu
REPEAT/MENU
-
Skip or Search
Pause or restart
B/X
X
./ >
Operations
B/x
x
ON REMOTE
bb / BB
ON UNIT
Using the remote control
Operate iPod by using the unit or the remote control after connected to the
unit. When connected, the unit operates as the connected iPod does and
the states like FOLDER •PRESET are changed by the iPod setting.
For “iPod Touch” model, the explanation of some functions may not be
applicable.
Listening to music from your iPod
Using an iPod - more you can do
1. Select the iPod function
2. “IPOD” displays
3. Start the playing
4. Before disconnecting the iPod,
change to any other function
by pressing
5. Remove iPod
ON REMOTE
ON UNIT
You can listen to music by connecting iPod to the player. Connect iPod to
“iPod DOCK” on the upper part of the unit.
Using an iPod
• While operating iPod to change the iPod sleep mode, press and hold
B/X
X on the remote control for about 5 seconds and to exit the iPod
X again
sleep mode by pressing B/X
• iPod is automatically charged when connected to the player.
• When the connection with iPod is not solid and the remaining battery is
not enough, the message “ERROR” is displayed.
NOTE :
1. Connect the portable player by
plugging the unit into
PORTABLE IN on the rear of the
unit
2. Turn the power on
3. Select the PORTABLE function
4. Turn the portable player on and
start it playing
1 /]]
INPUT/FUNC.
ON UNIT
The unit can be used to play the music from
many types of portable player.
Listening to music from your
portable player
1
F
ON REMOTE
9
You can enjoy the sound without equalizer effect.
NORMAL
Description
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual
pop, classic or jazz concert.
POP
CLASSIC
JAZZ
ON DISPLAY
This system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ.
The displayed items for the Equalizer may be different depending on sound
sources and effects.
Enjoying a pre-programmed sound field
./>
INPUT/FUNC.
x ENTER
10
B/x
x) on the unit or PLAY (B
B/X
X ) (MO./ST.) on the
Press PLAY (B
remote control. This will change the tuner from stereo to mono and usually
improve the reception.
Improve poor FM reception
1 Press and hold ENTER on the remote control for two seconds. “ERASE”
shows.
2 Press ENTER on the remote control to erase all the saved stations.
Deleting all the saved stations
1 Press and hold TUN. - /+ on the unit or TUN - /+ on the remote control
for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Looking for radio stations automatically
x ENTER
./>
F
ON REMOTE
FOLDER•PRESET
Listening to the radio - More you can do
5. To confirm press: Up to 30 radio
stations can be saved.
4. To select a ‘saved’ station
3. To ‘save’ a radio station:
A preset number will show in the
display.
2. Select the radio station
1. Select the FM
ON UNIT
Pulls out the FM antenna from the main unit.
Listening to the radio
You can search the radio stations by programme type by pressing RDS.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and hold ./>. The tuner
will search automatically. When a station is found the search will stop.
PTY - Programme Type, such as News, Sport, Jazz.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Programme Service name, the name of channel.
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio
station being listened to. Press RDS on the remote control several times to
view the information.
See information about your radio stations - optional
You can change the display information of the currently broadcasting
DAB channel. Press DAB MODE on the remote control repeatedly, the
display changes in the following order, SERVICE → PTY NAME →
FREQUENCY → DLS → QUALITY → ENSEMBLE.
Select a display mode and then press ./>, the initials of the
service name are displayed.
11
Press and hold ENTER on the remote control for 2 seconds. “ERASE” will
be displayed. Press ENTER to erase all the saved stations.
Deleting all of the saved DAB stations
If secondary broadcasting channels exist, the channel blinks, then press
X ) on the remote control to select it.
PLAY ( B/X
Press SCAN/SORT on the remote control for longer than 3 seconds,
all of the DAB bands are scanned. Then press it again, scanning will
be canceled.
DAB scan
Name sort : The service names are aligned in an alphabetical order.
Default sort : The service names are aligned in a scanning order.
Press SCAN/SORT on the remote control to display the sorting mode of
DAB broadcastings. Then, press the button once again to change the
mode.
Aligning the service names
DAB mode
x ENTER
FOLDER•PRESET
x ENTER
B/X
X
./>
ENSEMBLE - Displays the Ensemble of Component for the current
broadcast.
Selecting among Primary and Secondary broadcastings
B/x
x
./>
F
INPUT/FUNC.
QUALITY - It displays the current strength of electric field of broadcasting
which it doing in Bar form.
DLS - It displays the current Scroll of Component which is selected.
FREQUENCY - Displays the frequency of Component for the current
broadcast.
PTY NAME - Displays the Type of Component for the current broadcast.
SERVICE - Displays the Name of Component for the current broadcast.
Listening to the DAB - more you can do
6. To confirm press: Up to 50 radio
stations can be saved.
5. To select a ‘saved’ station
4. To ‘save’ a DAB radio station:
A preset number will show in the
display.
3. Play the selected channel
2. Select the DAB radio station
1. Select the DAB function:
The frequency received first after
scanning DAB bands is
broadcasted.
ON REMOTE
ON UNIT
DAB (Digital Audio Broadcasting) is a new form of radio broadcasting
using digital signals rather than traditional analogue signals.
DAB provides listeners CD-like quality radio programs. DAB can
carry not only audio but also text.
Listening to the DAB
SNOOZE/SET
./>
SNOOZE/SET
./>
12
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on LIGHT, the display changes in the following
order, L -- ON --> L -- OFF.
Mood Lighting
Press SLEEP on the remote control repeatedly, the display changes in the
following order, SLP OFF - LIGHT - corresponding icons.
Press ./> repeatedly on SLP OFF, the display changes in the
following order, (Dimmer ON) t SLP 10 t ... t SLP 90 t SLP OFF
(Dimmer OFF)
(Dimmer : Dims the LED (Light-emitting diode) of front panel by half in
power-on status.)
Fall asleep while listening to your unit
7. Select the minutes
8. Press
6. Press
5. Select the hours
SNOOZE/SET
./>
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
CLOCK
1 /]]
ON UNIT
2. Press for at least 2 seconds
1. Turn the power on
Setting the Clock
Press and hold SNOOZE/SET to change to stand by mode.
This function wakes you up every 5 minutes if you do not turn off the
alarm. When alarm is on and you press SNOOZE/SET, CD or USB is
changed into pause and mute. And tuner is on mute mode for 5 minutes
and then changed into play and mute off.
SNOOZE
• When any button is not pressed for longer than 5 minutes with the alarm
beeping, the alarm is automatically canceled.
NOTE :
• If you don’t set clock, the alarm function doesn’t work.
8 To the set or return to the function mode.
7 If you want to select the ALARM -- 1 or ALARM -- 2 repeat the step 2-6
6 press TUN.-/+ after selecting the VOL you want, then
press SNOOZE/SET to save it to the unit.
5 “The TIME” will be displayed. then you can set the time you want the
alarm to go on. TUN.-/+ to change the hours and minutes and
SNOOZE/SET to save.
4 press SNOOZE/SET when the function you want to be worken by is
showing, or press TUN.-/+ after selecting the function you want.
3 press SNOOZE/SET when the “ON” mode is showing, or
press TUN.-/+ after selecting “ON”
2 press SNOOZE/SET when the mode you want to be worken by is
showing, or press TUN.-/+ after selecting the mode you want.
1 press and hold ALARM 1,2 on the unit (or ALARM on the remote
control)
Using your unit as an alarm clock
6. Remove the USB player
5. Before disconnecting the
portable USB player, change to
any other function by pressing
INPUT/FUNC.
B/X
X
B/x
x
4. To stop, press
F
x ENTER
B/x
x
3. Start your media playing
F
ON REMOTE
./>
INPUT/FUNC.
ON UNIT
./>
2. Select a file you want to play
1. Select the USB function
The advantage of connecting your portable USB device through the
system’s USB port is that the portable device can be controlled from the
system. Connect the portable player to the unit. (not supplied).
Using an USB device
13
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not
supported.
• USB port of the unit can not be connected to PC. This unit can not be
used as a storage device.
Look out for the follows
Devices which require additional program installation when you have
connected it to a computer, are not supported.
USB device requirement
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
Compatible USB Devices
B/X
X
REC
x ENTER
USB REC
B/x
x
F
ON REMOTE
B/x
x
14
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
The files in the sub-folders are not recorded during all track recording.
One track recording
If the USB recording is started during playback of the CD, the one track/
file would be recording into the USB.
Recording Music file in disc source to USB
1. Press USB REC on the unit (REC on the remote control) for longer than
3 seconds.
2. Use ./> to select the bit rate and USB REC on the unit
(REC on the remote control) again to select the recording speed.
3. Press ./> to select a desired recording speed and USB REC
on the unit (REC on the remote control) again to finish recording.
(Only AUDIO CD)
1 x speed : ( 96kbps, 128kbps, 192kbps, 256kbps)
- You can listen to music while recording it.
2 x speed (Only 96kbps, 128kbps)
- you can just recording the music file.
To select recording bit rate and speed
Recording to USB - more you can do
4. To stop a Recording
3. Start the recording
2. Select a mode in which you want
to record
(ex. CD/ TUNER....)
Play a sound source first.
If you want to record desired music
file in disc to USB, record after
playing back the file.
INPUT/FUNC.
ON UNIT
MP3/ WMA
The other sources
Respect copyrights
Be responsible
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offence. This
equipment should not be used for such purposes.
AUDIO CD
• It’ll be stored as follows.
• The FOLDER name is displayed on the display window, but If the
FOLDER name is not english, “UNKNOWN” appears.
• The numbering of the recording file is entered from the lowest number.
So if you delete some of the recording files, the next recording file could
be the lowest number among them.
• You may not record more than 999files.
• In the state CD-G disc USB record is not operated.
• A file is recorded by 128Mbyte when you record for a long term.
• Multi card reader device or External HDD can not be used for USB
recording.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
• Do not remove the USB device or turn off the unit during USB recording.
If not, an incomplete file may be made and not deleted on PC.
• When you stop recording during playback, the file that has been
recorded at that time will be stored.
• During recording MP3/ WMA, there is no sound.
• You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO, MP3/ WMA CD only)
You can record a various sound source to USB.
1. Connect the USB device to the unit
When you are recording, look out for the following
Recording to USB
Power supply
AC/DC adapter
Power consumption
Net Weight
External dimensions (WxHxD)
Operating temperature
Operating humidity
Output Power
T.H.D
Frequency Response
General
Remove the obstacle.
Frequency response
Signal-to-noise ratio
Dynamic range
200 - 18000Hz
70 dB
60 dB
8 - 256kbps
DAB Tuning Range
CD
87.5 - 108.0 MHz
174 - 239 MHz
70 dB
6ΩX2
FM Tuning Range
DAB Tuning Range
Tuner
Signal-to-noise ratio
Speakers
The battery in the remote control is exhausted. Replace the battery with new one.
Operate the remote control within about 16 ft (5 m).
There is an obstacle in the path of the remote
control and the unit.
15
Point the remote control at the remote sensor of the unit.
The remote control is not pointed at the
remote sensor of the unit.
The remote control is too far from the unit.
Charge the ipod. iPod is automatically charged when
connected to the player.
Check whether ipod is fully charged.
100 – 240V, 50/ 60Hz
DA-30J12, Asian Power Devices Inc.
DC12V, 2.5A
2.81 kg
431 x 185 x 214 mm
5 oC to 35 oC
5% to 85 %
5W+5W
10 %
200 - 18000 Hz
The remote control does not
work properly.
Connect it to the unit correctly.
iPod does not work.
Check whether the player is connected to
the unit correctly.
Tune to the station manually.
Radio stations cannot be tuned in. The signal strength of the radio station is too
weak.
Clean the disc.
Insert a playable disc.
An unplayable disc is inserted.
The unit does not start playback.
The disc is dirty.
Press INPUT/FUNC. (F) and check the selected function.
Check whether you select right function.
Check the condition by operating other electronic devices.
Check whether electricity failed.
Correction
Plug in the power cord.
Cause
The power cord is not plugged in.
No sound.
Specifications
Remote
control
iPod
RADIO
CD
General
No power.
Symptom
Troubleshooting
This guarantee does not affect your statutory rights.
E. Aerial alignment and consumer control adjustments are not covered by
this guarantee.
D. We respectfully point out that your dealer is not obligated to replace
batteries if they become exhausted or worn in use.
C. Any claims made under guarantee must be directed to the dealer from
whom the equipment was originally purchased. The dealer may, before
carrying out service under guarantee, require a receipted account as
evidence of the date of purchase.
B. The dealer is not obliged to carry out service under guarantee if
unauthorized modifications are made to the apparatus, or if non
standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
A. The dealer may restrict the guarantee to the original purchaser.
PLEASE NOTE:
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment,
for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
1. All faulty components which fail due to defective manufacture will be
replaced free of charge for a period of 12 months from the original date
of purchase.
expedite this Guarantee.
● LG Electronics U.K. Ltd. will provide the following services in order to
It is helpful to complete at least
your name, address, phone, model
& serial numbers and return it. This
will enable LG to assist you in the
future should you lose your receipt,
your units be stolen, or should
modifications be necessary.
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
Please complete for your own record
SERIAL NO.*
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
*
MODEL NO.*
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday
9.00am-4.30pm
● Product Registration Card :
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY
OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
GUARANTEE
Technology with the human touch
Download PDF

advertising