LG | XA66 | LG XA66 Owner’s Manual

OWNER’S MANUAL
Micro Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO INNER PAGE OF BACK COVER.
XA66 (XA66, XAS66F)
P/NO : MFL67161638
XA66-D0U-AGBRLL-ENG.indd 1
11. 05. 24
9:28
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
XA66-D0U-AGBRLL-ENG.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
11. 05. 24
9:28
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
XA66-D0U-AGBRLL-ENG.indd 3
LG Electronics hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
2004/108/EC, 2006/95/EC, and
2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The
Netherlands (Tel : +31–(0)36–547–8888)
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
POWER: This unit operates on a mains supply of
200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363
approved 13 amp mains plug, fused at 5 amp.
When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this
plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the
type of plug supplied is not suitable for the mains
sockets in your home, then the plug should be
removed and a suitable type fitted. Please refer to
the wiring instructions below:
WIRING: A mains plug removed from the mains
lead of this unit must be destroyed. A mains plug
with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the
earth symbol or coloured green or green and
yellow. If any other plug is fitted, use a 5 amp fuse,
either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying
the terminals in your plug, proceed as follows: The
wire which is coloured blue must be connected
to the terminal which is marked with the letter
N or coloured black. The wire which is coloured
brown must be connected to the terminal which
is marked with the letter L or coloured red.
11. 05. 24
9:28
4
Table of Contents
Table of Contents
1
Getting Started
2
5
5
5
5
5
5
6
7
8
Safety Information
Unique Features
Accessories
Playable file Requirement
– MP3/WMA music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front panel
Rear panel
2
Connecting
9
9
9
9
9
Connecting to speakers
– Attaching the speakers to the unit
Optional Equipment Connection
– USB Connection
– PORT. IN Connection
3
Operating
10
10
10
10
10
10
Basic Operations
– CD/ USB Operations
– Selecting a folder
Other Operations
– Programmed Playback
– Displaying file information
(ID3 TAG)
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Improving poor FM reception
– Seeing information about a Radio
station
Sound adjustment
– Setting the surround mode
Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
11
11
11
11
11
11
12
12
12
12
13
13
XA66-D0U-AGBRLL-ENG.indd 4
13
13
13
14
Advanced Operations
– Listening to music from your external
device
– Recording to USB
– To select recording bit rate and speed
4
Troubleshooting
15
Troubleshooting
5
Appendix
16
17
17
17
17
Specifications
Maintenance
– Handling the Unit
– Notes on Discs
Trademarks and Licenses
6
Warranty
18
Warranty
11. 05. 24
9:28
Getting Started
Unique Features
5
Compatible USB Devices
y MP3 Player : Flash type MP3 player.
USB Direct Recording
y The USB function of this unit does not support
all USB devices.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Accessories
USB device requirement
y Devices which require additional program
installation when you have connected it to a
computer, are not supported.
1
Getting Started
Records music to your USB device.
y USB Flash Drive : Devices that support USB2.0 or
USB1.1.
y Do not extract the USB device while in operation.
Please check and identify the supplied accessories.
y For a large capacity USB, it may take longer than
a few minute to be searched.
y To prevent data loss, back up all data.
*
*
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
*
Remote Control (1)
Battery (1)
Playable file
Requirement
y Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
y This unit is not supported when the total
number of files is 1 000 or more.
y External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
y USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
MP3/WMA music file
requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
y Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
y Bit rate : 32 - 320 kbps (MP3), 40 - 320 kbps
(WMA)
y Maximum files : Under 999
y File extensions : “.mp3”/ “.wma”
y CD-ROM file format : ISO9660/ JOLIET
y We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
XA66-D0U-AGBRLL-ENG.indd 5
11. 05. 24
9:28
6
Getting Started
Remote
control
• • • • • • a • • • • •
• • • • • • c • • • • •
POWER : Switches the unit ON
or OFF.
SLEEP : Sets the system to turn
off automatically at a specified
time.
(Dimmer : The display window
will be darkening by half.)
? : The button is not available
for any function.
1
Getting Started
EQ : Chooses sound impressions.
• • • • • • b • • • • •
PRESET/FOLDER W/S :
Searches for a folder of MP3/
WMA files. When a CD/ USB
containing MP3/ WMA files in
several folders is being played,
press PRESET/FOLDER W/S
selects to the folder you want to
play. Choose a ‘preset number’
for a radio station.
FUNCTION : Selects the
function and input source.
VOLUME W/S : Adjusts
speaker volume.
@ MUTE : Mutes the sound.
INFO : Checks information
about your music. MP3 files
often come with tags. The tag
gives the Title, Artist, Album or
Time information.
REPEAT/RANDOM : Listens
to your tracks repeatedly or
randomly. (only in CD/USB)
TUN. -/+ : Selects the radio
station.
Cc/vV (Skip/
Search):
- Skips Fast backward or
Forward.
- Searches for a section within a
track.
Z : Stops playback or recording.
d/M (Play/Pause) : Starts or
pauses playback.
Battery Installation
PROGRAM/MEMO :
- For storing radio stations if you
have saved radio stations using
PROGRAM/MEMO, you can
scroll through them and select
one.
- Listens to your tracks in any
order.
X REC : USB direct recording.
• • • • • • d • • • • •
Remove the battery cover on
the rear of the Remote Control,
and insert one (size AAA)
battery with 4 and 5 matched
correctly.
XA66-D0U-AGBRLL-ENG.indd 6
RDS/ PTY : RDS (Radio Data
System)/ Searches radio stations
by radio type.
11. 05. 24
9:28
Getting Started
7
Front panel
1
Getting Started
a Display window
b Disc tray
c EQ
Chooses sound impressions.
d FUNC.
Selects the function or input source.
e 1/!(Power ON/OFF)
f B (OPEN/CLOSE)
g Z STOP
Stops playback or recording
h Remote sensor
i zM
Starts playback and pauses.
VOL. +/Controls the volume when using any function.
TUN. -/+
Selects the radio station
C/ V(Skip/Search)
Search backward or Forward
Skips to the previous/ next track
XA66-D0U-AGBRLL-ENG.indd 7
j PORT.IN
The player can be used to play the music from
many types of portable player.
PHONES
Headphone jack.( 3.5 mm) A warning that
excessive sound pressure from earphones and
headphones can cause hearing loss.
CLOCK
For setting the clock and checking the time.
TIMER
With the TIMER function you can turn CD,USB
and TUNER on or off at a desired time.
SET/RDS (Optional)
Confirms the setting. Shows information about
radio stations.
REC.
Recording (Recording to USB) USB Connector.
USB port
You can play or recording sound files by
connecting the USB device.
11. 05. 24
9:28
8
Getting Started
Rear panel
1
Getting Started
a Power cord
b ANTENNA (FM)
c Cooling fan
d Speaker terminal
XA66-D0U-AGBRLL-ENG.indd 8
11. 05. 24
9:28
Connecting
Connecting to
speakers
Optional Equipment
Connection
Attaching the speakers to the
unit
USB Connection
Connect the USB Memory (or MP3 player, etc.) to
the USB port on the front of the unit.
2
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
9
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
, Note
Removing the USB Device from the unit
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
PORT. IN Connection
> Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
Color
Speaker
Position
Red
Front
Front right
White
Front
Front left
XA66-D0U-AGBRLL-ENG.indd 9
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
11. 05. 24
9:28
10
Operating
Basic Operations
Other Operations
CD/ USB Operations
Programmed Playback
1. Insert the disc by pressing B (Open/Close) or
connect the USB device to the USB port.
The program function enables you to store your
favorite files from any disc or USB device.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
A program can contain 20 tracks.
3. Select a file (or track) you want to play by
pressing Cc/vV.
3
Operating
To
Stop
Playback
Pause
Do this
Press Z
Press d/M
During playback, press d/M
During playback, press Cc/
Skipping to vV to go to the next track/
the next/ file or to return to the beginning of
previous the current track/ file.
track/ file Press Cc twice briefly to step
back to the previous track/ file.
Searching Press and hold Cc/vV
for a section during playback and release it at
within a track the point you want to listen to.
Press REPEAT/RANDOM on the
remote control repeatedly, the
Playing
display change in the following
repeatedly or
order, RPT1 -> RPT DIR (only MP3/
randomly
WMA) -> RPT ALL -> RANDOM ->
OFF
Selecting a folder
1. Press PRESET/FOLDER W/S on the remote
control repeatedly until a desired folder appears.
2. Press d/M to play it. The first file of folder will
play.
XA66-D0U-AGBRLL-ENG.indd 10
1. Insert a CD or USB and wait for it to be order.
2. Press PROGRAM/MEMO on the remote control
in stop status.
3. Press C/V on the unit or
Cc/vV on the remote control in
stop status.
4. Press PROGRAM/MEMO again to save and
select a next track.
5. Press d/M to play the programmed music files.
6. To clear your selection, press Z twice.
, Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press @ MUTE to mute your unit.
You can mute your unit, for example, to answer
the telephone, the “q” is displayed in the display
window.
11. 05. 24
9:28
Operating
Radio Operations
Listening to the radio
1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUN. -/+ for about 0.5 seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
11
Deleting all the saved stations
1. Press and hold PROGRAM/MEMO for two
seconds. “ERASE ALL” will flash up on the unit
display.
2. Press PROGRAM/MEMO to erase all saved radio
stations.
Improving poor FM reception
Press d/M on the remote control. This will change
the tuner from stereo to mono and usually improve
the reception.
Or
Press TUN. -/+ repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM .
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by pressing
TUN. -/+.
3. Press PROGRAM/MEMO a preset number will
flash in the display window.
4. Press PRESET W/S to select the preset number
you want.
5. Press PROGRAM/MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET W/S.
XA66-D0U-AGBRLL-ENG.indd 11
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS repeatedly to cycle through the various data types.
PS
(Programme
Service Name)
PTY
(Programme
Type
Recognition)
RT (Radio Text)
3
Operating
3. Adjust the volume by rotating VOLUME on
the unit or by pressing VOLUME W/S on the
remote control repeatedly.
The name of the channel will
appear in the display.
The programme type (e.g. Jazz
or News) will appear in the
display.
A text message contains special
information from the broadcast
station. This text may scroll
across the display.
CT (Time
This shows the time and date as
controlled by broadcast by the station.
the channel)
You can search the radio stations by programme
type by pressing RDS. The display will show the last
PTY in use. Press PTY one or more times to select
your preferred programme type. Press and hold
Cc/vV. The tuner will search automatically. When a station is found the search will stop.
11. 05. 24
9:28
12
Operating
Sound adjustment
Setting the Clock
1. Turn the unit on.
Setting the surround mode
2. Press CLOCK for at least 2 seconds.
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using EQ.
3. Choose time mode by pressing C/V.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing C/V.
3
Operating
On Display
Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song files.
POP
CLASSIC
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop, classic
or rock concert.
BASS BLAST
BYPASS
Reinforce the treble, bass and
surround sound effect.
You can enjoy the sound
without equalizer effect.
, Note
Maybe you need reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
6. Press SET.
7. Select the minutes by pressing C/V.
8. Press SET.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press TIMER. Each functions flashes.
3. Press SET when the function you want to be
woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to unit turns on. Press C/V to
change the hours and minutes and press SET to
save.
5. The “OFF TIME” will be displayed. This is your
desired time to unit turns off.
6. Press C/V to change the hours and
minutes and press SET to save.
7. Press C/V to change the volume and
press SET to save. The clock icon “(“ shows
that the alarm is set.
8. Press TIMER button 2 times. You can check the
setting status.
, Note
y If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing TIMER even when
the unit is turned off. Then this function will
working in everyday.
XA66-D0U-AGBRLL-ENG.indd 12
11. 05. 24
9:28
Operating
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,
Note
y You can check the remaining time before
the unit turns off.
y Press SLEEP. The remaining time appears in
the display window.
y Sleep function will working after dimmer.
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim off.
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of external device.
(Refer to the page 9)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1/! (Power).
3. Select the PORTABLE function by pressing
FUNC. on the unit or FUNCTION on the remote
control.
4. Turn the external device and start it playing.
Recording to USB
3
Operating
Dimmer
13
1. Connect the USB device to the unit.
2. Select a function by pressing FUNC. on the unit
or FUNCTION on the remote control.
One track recording - You can record to USB
after playing a file you want.
All tracks recording - You can record to USB after
stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Start the recording by pressing REC. on the unit
or X REC on the remote control.
4. To stop recording, press Z.
Pausing recording
During recording, press REC. on the unit or X REC
on the remote control to pause recording. Press it
again to restart recording. (Only Radio, Portable)
XA66-D0U-AGBRLL-ENG.indd 13
11. 05. 24
9:28
14
Operating
To select recording bit rate
and speed
1. Press REC. on the unit or X REC on the remote
control for longer than 3 seconds.
2. Use Cc/vV on the unit or remote
control to select the bit rate.
y During recording MP3/ WMA, there is no
sound.
3. Press REC. on the unit or X REC on the remote
control again to select the recording speed.
y When you stop recording during playback,
the file that has been recorded at that time
will be stored. (AUDIO CD Only)
4. Press Cc/vV on the unit or on the
remote control to select a desired recording
speed; (Only AUDIO CD)
3
, Note
y You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
Operating
X1 SPEED
- You can listen to music while recording it.
y Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
X2 SPEED
- You can just record the music file.
y If USB recording does not work, the
message like “NO USB”, “ERROR”, “FULL” or “NO
REC” is displayed on the display window.
5. Press REC. on the unit or X REC on the remote
control to finish the setting.
y Multi card reader device or External HDD
can not be used for USB recording.
6. To stop recording, press Z.
y A file is recorded by about 512 Mbyte when
you record for a long term.
y When you stop recording during playback,
the file will not be stored.
y You may not store more than 999 files.
y It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : TUNER, PORTABLE and the like.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
XA66-D0U-AGBRLL-ENG.indd 14
11. 05. 24
9:28
Troubleshooting
15
Troubleshooting
Problem
Cause & Correction
y The power cord is not plugged in. Plug in the power cord.
No Power.
y Check whether electricity failed. Check the condition by operating other
electronic devices.
y Check whether you select right function. Press FUNCTION and check the
selected function.
No sound.
y Speaker cables are not connect correctly. Connect the speaker cables
correctly.
y The volume is set to minimum. Use the volume controller to adjust the
volume.
y An unplayable disc is inserted. Insert a playable disc.
y No disc is inserted. Insert a disc.
The unit does not start
playback.
y The disc is dirty. Clean the disc. (Refer to the page 17)
y The antenna is positioned poorly. Adjust its position.
Radio stations cannot
be tuned in properly.
y The signal strength of the radio station is too weak. Tune to the station
manually.
y No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels). Preset some radio stations, see page 11
for details.
4
Troubleshooting
y The disc is inserted upside down. Place the disc with the label or printed
side facing upwards.
y The remote control is not pointed at the remote sensor of the unit. Point
the remote control at the remote sensor of the unit.
y The remote control is too far from the unit. Operate the remote control
within about 16 ft (5 m).
The remote control
does not work properly. y There is an obstacle in the path of the remote control and the unit. Remove
the obstacle.
y The battery in the remote control is exhausted. Replace the battery with
new one.
XA66-D0U-AGBRLL-ENG.indd 15
11. 05. 24
9:28
16
Appendix
Specifications
General
Power supply
200 - 240 V, 50 - 60 Hz
Power consumption
50 W
Net Weight
2.8 kg
External dimensions (W x H x D)
170 x 243 x 267 mm
Operating conditions Temperature
5 °C to 35 °C (41 °F to 95 °F)
Operation status: Horizontal
Operating humidity
5 % to 85 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Output Power
30 W + 30 W
CD
Frequency Response
40 Hz to 20 kHz
5
Signal-to-noise ratio
70 dB
Appendix
Dynamic range
55 dB
USB
USB Version
USB 2.0 or USB 1.1
Bus Power Supply
DC 5 V
500 mA
Speakers
Type
2 Way 2 Speaker
Impedance
6Ω
Rated Input Power
30 W
Max. Input Power
60 W
Net Dimensions (WxHxD)
150 x 243 x 164 mm
Net Weight(1EA)
1.7 kg
y Design and specifications are subject to change without notice.
XA66-D0U-AGBRLL-ENG.indd 16
11. 05. 24
9:28
Appendix
Maintenance
17
Notes on Discs
Handling Discs
Handling the Unit
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Trademarks and
Licenses
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
5
Appendix
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
XA66-D0U-AGBRLL-ENG.indd 17
11. 05. 24
9:28
18
Warranty
Technology with the human touch
GUARANTEE
•
LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from
the original date of purchase. These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made
to the apparatus, or if non standard components are used or if the serial number of the apparatus is
removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a receipted
account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become
exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
6
Warranty
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This
will enable LG to assist you in the future should you lose your receipt, your units be stolen, or should
modifications be necessary.
• To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
XA66-D0U-AGBRLL-ENG.indd 18
11. 05. 24
9:28
XA66-D0U-AGBRLL-ENG.indd 19
11. 05. 24
9:28
XA66-D0U-AGBRLL-ENG.indd 20
11. 05. 24
9:28
Download PDF