LAC2900RN.LGERO_ENG_MFL60361524
ENGLISH
LAC2900RN
Table of Contents
3
4
5
6
7
8
9
2
Safety Note
Front Panel
About Detachable Control Panel
Installation
Basic installation
Removing the existing receiver unit
ISO-DIN installation
Connection
Basic operation
Mute
Using the EQ
Adjusting the sound level
XDSS+(Extreme Dynamic Sound System)
Checking the clock
Setting the clock
Listening to a CD
Pause or restart a CD
Search for a section within a track / file
Skip to another track / file
Intro scan
Repeat
Shuffle
MP3/WMA Track -10 / +10
MP3/WMA Folder UP/DOWN
Checking information about your music
CAR CD/MP3/WMA Receiver
10
11
12
13
Listening to the radio
Auto search memory
Storing and recalling broadcast frequencies
To scan the preset stations
To tune in the preset stations
Listening RDS broadcasting
Connecting an Auxiliary Equipment
Changing settings
Troubleshooting
Specifications
This product is manufactured to comply with Directive
2006/28/EEC(ANNEX I , 3.2.9), 72/245/EEC, and
2006/95/EC.
European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327
AE Almere, The Netherlands
(Tel : +31-036-547-8940)
Safety Note
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference.
Should the unit require maintenance, contact an authorized service center. Performing
controls, adjustments, or carrying out procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
Do not use for many hours at extremely low or high temperature.
(-10~60°C)
To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use the
unit after proper installation in your vehicle.
8 cm
This unit cannot play 8cm disc (use 12cm disc only).
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Caution
When being connected in a wrong way, the unit displays as follows.
- Antenna port short : “ANTENNA ON PORT SHORT CIRCUIT CHECK”
After connecting it again, restart the unit.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
CAR CD/MP3/WMA Receiver
3
Front Panel
1
2
SOURCE [SRC]
• Volume
• [MUTE]
• Power [PWR]
3 Skip / Search / Seek / Tune B?+
4 Select [SEL] / [MENU]
5 CD slot
6 Display window
7 • Traffic Announcement[TA]
• Programme Type[PTY]
8 Display [DISP]
9 Eject Z
10 Release
4
CAR CD/MP3/WMA Receiver
U/AS]
11 • Auto Store [U
u/PS]
• Preset Scan [u
u
• MP3/WMA Track +10/-10 U/u
u
• Folder Up/Down U/u
12 AUX in
13 Preset Station [1~6]
14 Shuffle [SHF]
15 Repeat [RPT]
16 Intro Scan [INT]
17 Play/Pause B/X
18 [BAND]
19 Equalizer [EQ]
Extreme Dynamic Sound System [XDSS+]
20 Skip / Search / Seek / Tune -?b
About Detachable Control Panel
Attaching the control panel
1
2
Detaching the control panel
Align the left side of the panel with
the stopper.
Push the right side or panel into the
unit until it clicks.
1
1
2
2
3
4
Press the “
” (RELEASE) to
open the control panel.
Hold the right part of the control
panel.
Pull out the control panel.
Place the control panel in the
supplied protective case.
2
3
1
Caution
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the display.
4
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
Control panel
Protective Case
Note
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
CAR CD/MP3/WMA Receiver
5
Installation
ISO-DIN Installation
Basic Installation
1
2
3
4
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Control panel
If there is already an installation
sleeve for the receiver unit in the
dashboard, it must be removed.
A
1
2
A
CAR CD/MP3/WMA Receiver
2
3
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.
1
4
5
6
Control panel
Removing the existing receiver unit
6
1
Before installing, make sure that the
ignition-switch is set to OFF and
remove the terminal of the car battery
to avoid short-circuiting.
Bend the claws
according to
the thickness
of the
dashboard
3
3
2
4
5
6
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.
Connection
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
B
A
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
A8
Power Antenna(Blue)
A7
Dimmer(Pink)
A2
To Ignition(Red)
A1
Power
Antenna
Control Relay
Dimmer Switch
Ignition Switch
B 1
B 2
To Battery(+)(Yellow)
B 3
B 4
A5
Ground(-)(Black)
BAT T E
RY
B 5
B 6
B 7
B 8
A 3/ A 4/A 6
B
B
B
B
B
B
B
B
1
2
3
4
5
6
7
8
Violet / Black Stripe : Rear Right –
Violet : Rear Right +
Gray / Black Stripe : Front Right –
Gray : Front Right +
Green/ Black Stripe : Rear Left –
Green : Rear Left +
White/Black Stripe : Front Left –
White : Front Left +
Not connected
CAR CD/MP3/WMA Receiver
7
Adjusting the sound level
Basic Operation
ON PLAYER
1. Turn the unit on.
PWR
2. Select a source.
SRC
3. Adjust the volume.
Rotate PWR
Press SEL repeatedly to select the mode you want to adjust from VOL(volume),
BAL(left/right speaker), and FAD(front/rear speaker). To adjust sound quality,
rotate PWR.
Note
When EQ and XDSS+ is set to “Off”, you can also adjust the sound level
(BAS(bass), MID(middle), TRB(treble)) settings.
Basic operation - more you can do
XDSS+ (Extreme Dynamic Sound System)
Mute
Press and hold EQ/XDSS+ . (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold it again.
Press VOL/MUTE to cut the sound. To cancel it, press again.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The
indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off (not displayed)
Note
• When XDSS+ is set to “Off”, you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and then adjust the sound level, it will be automatically stored for the currently
selected USER mode. Refer to the “Adjusting the sound level” for USER 1/2
mode.
8
CAR CD/MP3/WMA Receiver
Checking the clock
You can see the clock pressing DISP .
Setting the clock
When RDS CT information is not received and then you set CT on the setting
menu to OFF, you can adjust the time by yourself.
Refer to the page 11 for setting the CT(Clock Time) ON/OFF.
1 Press the DISP and then, press and hold it for more 1 second.
2 Press the B?+ to adjust the hour.
3 Press the -?b to adjust the minute.
4 Press DISP again to finish the setting.
Shuffle
Listening to a CD
ON PLAYER
1. Insert a CD.
2. Adjust the volume.
Rotate PWR
Press or press and hold SHF on the player. Each files in the current selected
folder (
SHF) or all of the tracks/files (SHF) on the disc is played randomly.
Press SHF again to cancel it.
Note
During random playback, if you press -?b , you won’t go back to the previous
track.
Listening to a CD - more you can do
MP3/WMA Track -10 / +10
Pause or restart a CD
(If there is no folder or one folder.) During playback press u/PS to go back 10
tracks, or press U/AS to go forward 10 tracks.
Press B[] on the player during playback. Press this button again to resume play.
Search for a section within a track / file
Press and hold -?b / B?+ on the player for about 1 second during playback and
then release at the point you want.
MP3/WMA Folder UP/DOWN
(If there are more than two folders.) During playback, press u/PS to go back to
the previous folder, or press U/AS to go forward to the next folder.
Checking information about your music
Skip to another track / file
Press -?b / B?+ on the player. To skip to previous track, press briefly -?b within 3
seconds of playing time.
Intro scan
Press or press and hold INT on the player. Each files in the current selected
folder (
INT) or the first 10 seconds of each tracks/files (INT) on the disc are
played. To cancel it, press the button again.
Repeat
Press or press and hold RPT on the player. The current selected tracks/files (1
RPT) or folder (
RPT) on the disc is played repeatedly. To cancel it, press
the button again.
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP two times to check a file/folder name, and three times to check
ID3/WMA/CD TEXT during file playback. If there is no information, “NO TEXT”
will be shown in the display window.
Note
•
: The icon is displayed during MP3/WMA playback.
• MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it will not be possible to playback
MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no
right to grant such permission. Permission should always be sought from
the copyright owner.
CAR CD/MP3/WMA Receiver
9
Listening to the radio
Listening RDS broadcasting
ON PLAYER
1. Select a source to tuner.
SRC
2. Select a band.
BAND
3. Auto seek.
Manual seek.
-?b / B?+
Press and hold
-?b / B?+
Listening to the radio - more you can do
Auto search memory
Press U/AS. The six strongest broadcast frequencies will be stored under preset
button 1-6 in the order of their signal strength. To cancel, press U/AS.
Storing and recalling broadcast frequencies
1 Press BAND to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
To scan the preset stations
Press u/PS. Each preset station appears. To cancel, press u/PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 16.
Note
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is automatically erased.
10
CAR CD/MP3/WMA Receiver
ON PLAYER
1. Select a source to tuner.
2. Select a band to FM.
3. Select a programme types.
SRC
BAND
Press and hold TA/PTY
4. Select a station in PTY type.
1-6
RDS broadcasting information.
Press and hold the TA/PTY repeatedly for selecting each mode.
Music group t Speech Group t Search off
NO. MUSIC GROUP
1.
2.
3.
4.
5.
6.
POP M, ROCK M
EASY M, LIGHT M.
CLASSICS, OTHER M
JAZZ, COUNTRY
NATION M, OLDIES
FOLK M
NO. SPEECH GROUP
1. NEWS, AFFAIRS, INFO
2. SPORT, EDUCATE, DRAMA
3. CULTURE, SCIENCE, VARIED
4. WEATHER, FINANCE, CHILDREN
5. SOCIAL, RELIGION, PHONE IN
6. TRAVEL, LEISURE, DOCUMENT
Connecting an Auxiliary Equipment
1. Connect an auxiliary equipment to the AUX jack with line
input cable.
2. Select a source to AUX.
3. Play the connected Auxiliary
Equipment.
4. Adjust the volume.
ON PLAYER
-
SRC
Rotate PWR
Changing settings
ON PLAYER
1. Select one item.
Press
MENU
2. Select a source.
Rotate PWR
3. Finish the setting .
Press MENU
AF(Alternative frequency) ON / OFF
When the reception quality drops, the tuner automatically changes to another
station in the network, broadcasting a better reception quality, using the PI
and AF codes.
REG (Region) ON / OFF
REG ON : The unit switches to another station, within the same network,
broadcasting the same program when the receiving signals from the current
station become weak.
REG OFF : The unit switches to another station, within the same network
when the receiving signals from the current station become weak. (This
mode, the program may differ from the one currently received.)
TA(Traffic Announcement) ALARM / SEEK
TA ALARM : When the tuned station has no TP information for 5 seconds, a
double beep sound is output.
TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information.
PI (Programme Identification) SOUND / MUTE
PI SOUND : If the sound of a station with different PI is heard intermittently, the
receiver mutes the sound after 1 second.
PI MUTE : If the sound of a station with different PI is heard intermittently, the
receiver mutes the sound right now.
C-T(Clock Time) ON/OFF
You can use the RDS CT information to update the time. When RDS CT information is not received and then you set CT to OFF, you can adjust the time
by yourself. Refer to the page 8 for setting the clock.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF/ ON
You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source.
DIM(Dimmer) OFF / ON / AUTO
You can change the brightness of the display window during the power-on
status. When you set DIMMER to AUTO, the dimmer operates according to
the car dimmer setting.
DIM L (Dimmer Level)
When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2)
A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
CAR CD/MP3/WMA Receiver
11
Troubleshooting
Symptom
General
Power doesn’t turn on / The
unit doesn’t operate.
Cause
Leads and connectors are not properly.
The fuse is blown.
CD
Radio
Noise and other factors are causing the builtin microprocessor to operate incorrectly.
No sound is heard / The vol- Cables are not connected correctly.
ume level will not rise.
There’s audio skipping.
This unit is not firmly secured.
The playback is not possi
The disc is dirty.
ble.
The loaded disc is of a type this unit cannot
play.
The signal strength of the stations is too
Radio stations cannot be
weak(when tuning in with automatic tuning.)
tuned in.
No station has been preset or preset stations
have been cleared(when tuning by scanning
preset stations.)
12
CAR CD/MP3/WMA Receiver
Correction
Confirm once more that all connections are
correct.
Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to
install the correct fuse with the same rate.
Turn the unit off and then on.
Connect the cables correctly.
Secure this unit firmly.
Clean the disc.
Check what type the disc.
Tune in the stations manually.
Preset the stations.(Refer to the page 10)
Specifications
General
Output Power
Power Source
Speaker impedance
Ground System
Dimensions (W x H x D)
Net Weight
Tuner
FM
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
AM (MW)
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
CD
Frequency Response
S/N Ratio
Distortion
Channel Separation (1kHz)
AUX
Frequency Response
S/N Ratio
Distortion
Channel Separation (1kHz)
Max Input Level (1kHz)
53W x 4CH (Max.)
DC 12V
4Ω
Negative
180 x 50 x 176 mm (Without Control Panel)
1.3 kg
87.5-107.9, 87.5-108 MHz
55 dB
0.7%
12 dBµV
520-1720 or 522-1620 kHz
50 dB
1.0%
28 dBµV
20 Hz-20 kHz
80 dB
0.12%
55 dB
20 Hz-20 kHz
80 dB
0.1 %
45 dB
1.1V
Designs and specifications are subject to change without notice.
CAR CD/MP3/WMA Receiver
13
P/NO : MFL60361524
Download PDF

advertising