LG | LAS350B | LG LAS350B Owner’s Manual

OWNER’S MANUAL
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
LAS350B (LAS350B, S35A1-W)
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible
NOTICE: For Product Identification and
Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
Getting Started
This device is equipped with a portable battery or
accumulator.
Disposal of your old appliance
1.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
2.The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
3.For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
Disposal of waste batteries/accumulators
Pb
1. This symbol may be combined with chemical
symbols for mercury(Hg), cadmium(Cd) or
lead(Pb) if the battery Contains more that
0.0005% of mercury,0.002% of cadmium or
0.004% of lead.
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of Your old batteries/
accumulators will help to prevent potential
negative consequences for the environment,
animal and human health.
4. For more detailed information about disposal of
Your old batteries/accumulators, please contact
Your city office, waste disposal service or the
shop where You purchased the product.
1
Getting Started
Safety way to remove the battery from the
equipment: Remove the old battery or battery
pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to
human and animal health, the old battery or
the battery put it in the appropriate container
at designated collection points. Do not dispose
of batteries or battery together with other
waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, fire or the like.
3
4
Getting Started
Declaration of Conformity
1
Getting Started
Hereby, LG Electronics European Shared Service
Center B.V., declares that this Wireless Sound Bar
is compliant with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The complete Declaration of Conformity may be
requested through the following postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission
system, intended for use in all EU member states
and EFTA countries.
POWER: This unit operates on a mains supply of
200 - 240V ~ , 50 / 60Hz
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS
1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your
home, then the plug should be removed and
a suitable type fitted. Please refer to the wiring
instructions below:
Warning: A mains plug removed from the mains
lead of this unit must be destroyed. A mains plug
with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the
earth symbol or coloured green or green and
yellow. If any other plug is fitted, use same rating
of fuse in the plug.
Important: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may
not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique features
6Introduction
6
– Symbols used in this manual
6Accessories
7
Remote control
8
Front panel
8
Rear panel
9
Installing the sound bar
9
– Installing the cover
foot
10 Mounting the main unit on a wall
2Connecting
12
12
12
12
13
13
13
Connecting the subwoofer
– Attaching the subwoofer to the unit
Connecting to your TV
– Using an OPTICAL cable
Optional equipment connection
– OPTICAL IN connection
– PORTABLE IN connection
3Operating
14Operations
14 – DRC (Dynamic Range Control)
14 – Turn off the sound temporarily
14 – AV Sync
14 – Displaying input information
14 – Sleep timer setting
14 – Adjusting the brightness of the
display window
15 – Using your TV remote control
16 – AUTO POWER On/Off
16 – Auto function change
17 – LG Sound Sync
18 Using BLUETOOTH® technology
19 – Listening to music stored on the
BLUETOOTH devices
20Using BLUETOOTH App
20 – Install “Music Flow Bluetooth” App
onto Your BLUETOOTH Device
21 – Activate BLUETOOTH with “Music
Flow Bluetooth” App
22 Sound adjustment
22 – Setting sound effect
22 – Adjust volume level automatically
23 – Adjust the Treble/Bass
23 – Adjust the woofer level settings
23 – Night mode
5
1
2
4Troubleshooting
24Troubleshooting
3
5Appendix
26 Trademarks and licenses
27Specifications
28Maintenance
28 – Handling the unit
6Warranty
4
5
29Warranty
6
6
Getting Started
Unique features
1
Auto power down
Getting Started
This unit will turn off by itself for energy saving
consumption.
Accessories
Please check and identify the supplied accessories.
Designs and specifications of the accessories are
subject to change without prior notice.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Remote control (1)
Batteries (2)
Wall bracket (2)
Wall bracket install
guide (1)
Screws (2)
Cover foot (2)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started
Remote control
7
• • • • • • • • • • a • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF. / Switches
to the standby mode.
OPTICAL : Changes input source to OPTICAL.
VOL o/p : Adjusts speaker volume.
: Adjusts sound level of Treble or Bass.
WOOFER LEVEL W/S : Adjusts sound level of
Sub-woofer.
h: Changes input source to Bluetooth.
LG TV : Changes input source to LG TV
PORT.IN : Changes input source to Portable.
• • • • • • • • • • b • • • • • • • • • •
SOUND EFFECT : Selects a sound effect mode.
AV SYNC : Synchronizes the audio and video.
A/D : Selects Sound Effects or adjusts AV sync.
(Night mode) : Turns on or off Night mode.
• • • • • • • • • • c • • • • • • • • • •
DRC : Turns on or off DRC function.
INFO :
- Displays the information of an input source and
Bluetooth address.
- Controls TV remote (Refer to the page 15)
Replacement of battery
SLEEP : Sets the system to turn off automatically at
a specified time.
AUTO VOLUME : Turns on and off the AUTO
VOLUME mode.
AUTO POWER : Turns on or off AUTO POWER
function. (Refer to the page 16.)
? : This button is not available.
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
batteries with and matched correctly.
Getting Started
(Mute) : Mutes the sound.
1
8
Getting Started
Front panel
1
Getting Started
ARemote sensor
C1/! (Standby/On)
BDisplay window
DF (Function)
Selects the function and input source.
Standby LED
It lights up in red on standby mode.
Ep/o (Volume)
Adjusts volume level.
Rear panel
APower cord
COPT. IN : Optical input
BSUB WOOFER(4Ω) Connector
DPORT. IN : Portable input
Getting Started
Installing the sound
bar
Installing the cover
foot
You can extend the height of the unit by using
cover foot (height : 17 mm)
Place the unit in front of the TV and connect it to
the device you want. (Refer to pages 12 - 13.)
1. Turn the unit upside down.
2. Peel off a sticker attached to the cover foot.
Then place it on the existing foot of the unit.
3. Press the cover foot with adequate force to get
it firmly fixed.
How to Affix the Ferrite Core
(Optional)
You may need to attach Ferrite core in order to
reduce or eliminate any electrical interference.
>>Caution
yy For best performance of wireless
connection such as Bluetooth,
do not install the unit on Metallic
furniture because wireless connection
communicates through a module
positioned on the bottom of the unit.
yy Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when
installing or moving them.
1.Open
2. Wind (Twice)
yy Use caution when handling the Sub
Woofer. The speaker on the rear is
exposed. Avoid making contact with the
exposed speaker.
3.Close
1
Getting Started
You can hear the sound by connecting the unit to
the other device : TV, Blu-ray disc player, DVD player,
etc.
9
10
Getting Started
Mounting the main
unit on a wall
1
1. Match the TV’s BOTTOM EDGE of Wall bracket
install guide with the bottom of TV and attach
to the position.
TV
You can mount the main unit on a wall.
Getting Started
2. When you mount it on a wall (concrete), use the
wall plugs. You should drill some holes. A guide
sheet (Wall bracket install guide) is supplied to
drill. Use the sheet to check the point to drill.
>>Caution
Because it is difficult to make a connection
after installing this unit, you should connect
the cables before installation.
Preparation materials
Unit
Wall bracket install guide
3. Remove the Wall bracket install guide.
Wall bracket
Screws
(Not supplied)
Screws (A)
Wall plug
Getting Started
4. Fix the brackets with screws (A) as shown in the
illustration below.
11
6. Fix the unit with the screws firmly.
1
,,Note
Screws (A) and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
5. Put the unit on the brackets to match screw
holes on the bottom of the unit.
>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
Getting Started
,,Note
To detach the unit, perform it in reverse order.
12
Connecting
Connecting the
subwoofer
Connecting to your TV
Using an OPTICAL cable
Attaching the subwoofer to
the unit
2
1. Connect the OPT. IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connect the black wire to the terminals marked
- (minus) and the other end to the terminals(red
tube) marked + (plus).
Optical
cable
2. Set the INPUT source to OPTICAL. Press
OPTICAL on the remote control or F on the unit
until the function is selected.
,,Note
yy Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some
TV models, you must select the external
speaker option from the TV menu. (For
details, reference your TV user manual.)
yy Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
yy Details of TV setting menu vary depending
on the manufacturers or models of your TV.
Connecting
Optional equipment
connection
13
PORTABLE IN connection
OPTICAL IN connection
Connect an optical output jack of external devices
to the OPTICAL IN jack.
To the optical output jack of
external device
1. Connect the OPTICAL IN jack on the back of
the unit to optical out jack of your TV (or digital
device etc.)
2. Select the input source to OPTICAL by pressing
OPTICAL on the remote control or F on the
unit until the function is selected.
3. Listen to sound.
,,Note
Before connecting the optical cable, be sure to
remove the protection plug cover if your cable
has the cover.
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable players or external devices.
1. Connect the portable player to the
PORTABLE IN connector of the unit by using 3.5
mm stereo cable.
2. Turn the power on by pressing 1 (Power).
3. Select the PORTABLE function by pressing
PORT.IN on the remote control or F on the unit
until the function is selected.
4. Turn on the portable player or external device
and start playing it.
2
Connecting
MP3 player, etc...
14
Operating
Operations
Sleep timer setting
DRC (Dynamic Range Control)
Press SLEEP repeatedly to select the desired time
period options (in minutes):
Make the sound clear when the volume is turned
down and prevent sudden increase of sound
(Dolby Digital only). Set to [DRC ON] by using DRC.
Turn off the sound temporarily
Press
3
(Mute) to mute your unit.
You can mute your unit, for example, to answer
the telephone, “MUTE” is displayed in the display
window.
Operating
To cancel it, press (Mute) again on the remote
control or change the volume level.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1.Press AV SYNC.
2.Use A/D to scroll up and down through the
delay amount, which you can set at anything
between 0 and 300 ms.
Displaying input information
You can display various information by pressing
INFO.
OPTICAL: Audio format, Audio channel
Bluetooth: Address of connected Bluetooth
device
This unit will be turned off automatically by your
timer set.
DISPLAY OFF (display window will turns off ) ->
DIMMER (display window will be darkened by half )
-> Sleep timer value (180 ~ 10) -> Display on
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
You can check the remaining time before the
unit turns off . Press SLEEP the remaining time
appears in the display window.
Adjusting the brightness of
the display window
It helps you to watch TV without interruptions due
to the light from the display window of this unit.
DISPLAY OFF
Select DISPLAY OFF to turn off the display window
of this unit. If you input the buttons of the unit or
the remote control, display shows the status of the
unit and then turns off again after several seconds.
DIMMER
Select DIMMER to dim the display window.
Operating
15
Using your TV remote control
Auto power down
You can control some functions of this unit by
your TV remote control even by other company’s
product.
Controllable functions are volume up/down and
mute.
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
Press and hold INFO on the remote control for
about 3 seconds. “ON - TV REMOTE” appears and
you can control this unit by your TV remote control.
To check the status of this function, press and hold
INFO.
To turn off this function, press and hold INFO
and press it once again while “ON - TV REMOTE” is
scrolled.
LG
Panasonic
Philips
Samsung
Sharp
Sony
Toshiba
Vizio
yy Make sure that the sound output of your TV
is set to [External speaker].
yy Depending on the remote control, this
function may not work well.
yy This function may not work well when you
use LG Sound Sync.
How to disconnect the wireless
network connection or the wireless
device
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.
3
Operating
,,Note
yy Supported TV brands
So does this unit after six hours since Main unit
has been connected to other device using analog
input. (Ex : Portable, etc..)
16
Operating
AUTO POWER On/Off
Auto function change
This unit automatically turns on by an input source :
Optical, LG TV or Bluetooth.
This unit recognizes input signals such as optical,
Bluetooth and LG TV and then changes suitable
function automatically.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the
input signal and select the suitable function. You
can hear the sound from your device.
If you try to connect your Bluetooth device, this
unit turns on and ready to pair. Connect your
Bluetooth device and play your music.
This function turns on or off each time you press
AUTO POWER.
3
,,Note
Operating
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical/Wireless).
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
yy Depending on the connected device, this
function may not operate.
yy If you disconnect Bluetooth connection
by this unit, some Bluetooth devices try to
connect to the unit continually. Therefore
it is recommended to disconnect the
connection before turn off the unit.
yy When you turn on this unit for the first time,
Auto Power function is turned on status.
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.
When you try to connect
BLUETOOTH device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by
LG Sound Sync (Wireless connection), this unit
changes the function to LG TV. You can hear the
sound from your TV.
,,Note
To change to optical function, it needs 5
seconds of no signal.
Operating
LG Sound Sync
17
With wired connection
1. Connect your LG TV to the unit by using an
optical cable.
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Optical
cable
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
yy When the connection fails, make sure of the
condition of the TV and power.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turn off the unit.
-- Changing the function to the others.
-- Disconnecting the optical cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV when you
set AUTO POWER function to ON.
yy Details of TV setting menu vary depending
on the models of your TV.
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1 (Power) on the
remote control.
4. Select OPTICAL function by using OPTICAL on
the remote control or F on the unit until the
function is selected.
You can see "LG OPT" on the display window
if connecting normally between this unit and
your TV.
Operating
,,Note
3
18
Operating
1. Turn on the unit by pressing 1 (Power) on the
remote control.
Using BLUETOOTH®
technology
2. Select LG TV function by using LG TV on
the remote control or F on the unit until the
function is selected.
About BLUETOOTH
With wireless connection
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
3
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
Operating
,,Note
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
yy Details of TV setting menu vary depending
on the models of your TV.
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Operating
Listening to music stored on
the BLUETOOTH devices
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to
your Bluetooth device. Refer to your Bluetooth
device’s user guide. Once a pairing operation is
performed, it does not need to be performed again.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as
“LG LAS350B (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG LAS350B (08)” on your Bluetooth
device.
yy Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
yy You can connect this unit with up to 3
Bluetooth device simultaneously same
method as above description.
yy The multi pairing connection is only
supported on Android or iOS devices. (Multi
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth device
(Ex : Dongle etc..) doesn't supported multi
pairing.
3. When this unit is successfully connected
with your Bluetooth device, “PAIRED” will be
appear on the display window and change to
Bluetooth device name soon.
,,Note
yy "PAIRED" will be momentarily appear on the
display when you connect other devices for
multi pairing.
yy If it is unavailable to display device name on
the unit, "_" will be displayed.
4. Listen to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
,,Note
yy When using Bluetooth technology, you
have to make a connection between the
unit and the Bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device
to this unit again when you restart it.
yy Even if this unit connected up to 3
Bluetooth devices, you can play and
control music by using only one of the
connected devices.
yy When this unit connected with multiple
Bluetooth devices, only one device
which you are playing keeps Bluetooth
connection when you change the function
to the others.
3
Operating
1. Select the Bluetooth function by using h on
the remote control or F on the unit until the
function is selected.
Appears “BT” and then “BT READY” in display
window.
19
20 Operating
,,Note
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
Install “Music Flow Bluetooth”
App onto Your BLUETOOTH
Device
yy You may not control the Bluetooth device
with this unit.
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
yy Depending on the type of the device, you
may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
3
yy The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
Operating
yy Bluetooth connection will be disconnected
when the unit is turned off or the
Bluetooth device gets far from the unit.
yy When Bluetooth connection is
disconnected, connect the Bluetooth
device to the unit again.
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
yy When you connect Bluetooth device
(iOS device etc.) to this unit or operate
the device, the volume level can be
synchronized with each other.
Using BLUETOOTH
App
,,Note
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.
About “Music Flow Bluetooth” App
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has
a scanning software application. If you don’t
have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on area, QR code may not work.
Operating
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth
app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate BLUETOOTH with
“Music Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the
home screen to open “Music Flow Bluetooth”
app, and go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and turn on the User guide.
,,Note
yy “Music Flow Bluetooth ” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
yy If you use “Music Flow Bluetooth ” app for
operation, there would be some differences
between “Music Flow Bluetooth ” app
and the supplied remote control. Use the
supplied remote control as necessary.
yy Depending on the Bluetooth device,
“Music Flow Bluetooth ” app may not work.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device.
In this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth
” app, “Music Flow Bluetooth ” app may
operate abnormally.
yy When “Music Flow Bluetooth ” app operates
abnormally, check your Bluetooth
device and the connection of “Music Flow
Bluetooth ” app and then try to connect
again.
yy Depending on the smart phone's operating
system, you have some differences for
“Music Flow Bluetooth ” operation.
yy Even though Bluetooth connection will
be disconnected, you can use “Music Flow
Bluetooth ” app when you change the
function.
3
Operating
yy Make sure that your Bluetooth device is
connected to the Internet.
21
22 Operating
Sound adjustment
Setting sound effect
This unit supports Auto volume function that
automatically adjusts the volume level.
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
When the output sound is too loud or too low,
press AUTO VOLUME on the remote control. So
you can enjoy the sound with appropriate levels.
Press SOUND EFFECT repeatedly or press SOUND
EFFECT and then, press A/D.
To cancel this function, press the button again.
The displayed items for the equalizer may be
different depending on sound sources and effects.
On Display
3
Adjust volume level
automatically
STANDARD
Description
Operating
You can enjoy optimized
sound.
MUSIC
You can enjoy comfortable
and natural sound.
CINEMA
You can enjoy more
immersive and cinematic
surround sound.
FLAT
Provides balanced sound.
BOOST
Boosts the mid-range for
sound reinforcement.
TRE / BASS
(TREBLE / BASS)
Reinforces the treble and
bass.
,,Note
yy In some of sound effect mode, some
speakers, there’s no sound or low sound.
It depends on the mode of sound and the
source of audio, it is not defective.
yy You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound file changed.
Operating 23
Adjust the Treble/Bass
You can adjust the sound level of Treble, Bass as
your preference.
TREBLE/BASS : - 5 dB to 5 dB
1.Press
BASS
button repeatedly to select TREBLE or
2.Press VOL o/p to adjust the sound level.
Adjust the woofer level
settings
You can adjust the sound level of woofer from - 20
dB to + 6 dB.
Night mode
This function is useful when you want to watch
movies at low volume late at night.
Press
button on the remote control. So you can
activate Night mode. To cancel it, press
button
again.
3
Operating
Press WOOFER LEVEL W or WOOFER LEVEL S to
adjust the sound level of the woofer.
24 Troubleshooting
Troubleshooting
PROBLEM
CAUSE & CORRECTION
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not
work properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
No Power
yy The power cord is unplugged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
No sound
4
yy The mute function is activated.
Press (Mute) or adjust the volume level to cancel the mute function.
Troubleshooting
yy When you are using connection with a external device (set top box, Bluetooth
device etc.), adjust volume level of the device.
No woofer sound
No display
yy Connect the unit and the subwoofer. (Refer to the page 12)
yy The DISPLAY OFF function is activated.
Press SLEEP repeatedly to cancel the function. (Refer to the page 14)
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control
does not work
properly.
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The AUTO POWER
function does not
work.
yy Check connection of the external device such as TV, DVD/Blu-Ray player or
Bluetooth device.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.
yy Depending on the connected device, this function may not operate.
yy Check whether your LG TV supports LG Sound Sync.
LG Sound Sync does
not work.
yy Check connection of LG Sound Sync (Optical or wireless).
yy Check sound setting of your TV and this unit.
Troubleshooting 25
PROBLEM
CAUSE & CORRECTION
Check the details below and adjust the unit according to them.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
When you feel the
output sound of the
unit is low.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting
on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
4
Troubleshooting
26 Appendix
Trademarks and
licenses
All other trademarks are trademarks of their
respective owners.
Bluetooth® wireless technology is a system
which allows radio contact between electronic.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade
if the connection was made via Bluetooth®
wireless technology.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
5
Appendix
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Appendix 27
Specifications
General (LAS350B)
Power requirements
Refer to the main label on the unit.
Refer to the main label on the unit.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
880 mm x 59 mm x 90 mm
Net Weight (Approx.)
1.9 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 90 %
Input/Output
OPT. IN
3 V (p-p), Optical jack x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack) x 1
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Amplifier
120 W
Front
25 W x 2 (6 Ω at 1 kHz)
Subwoofer
70 W (4 Ω at 100 Hz)
THD
10 %
Subwoofer (S35A1-W)
Type
1 Way 1 Speaker
Impedance
4Ω
Rated Input Power
70 W
Max. Input Power
140 W
Dimensions (W x H x D)
156 mm x 300 mm x 288 mm
Net Weight (Approx.)
2.9 kg
Bluetooth
Codec
SBC
yy Designs and specifications are subject to change without prior notice.
5
Appendix
Total
28 Appendix
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
5
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Warranty 29
Technology with the human touch
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12
months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of
this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made in
accordance with the published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the
apparatus, or if non standard components are used or if the serial number of the apparatus is removed, defaced,
misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally
purchased. The dealer may, before carrying out service under guarantee, require a receipted account as evidence of
the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in
use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG
to assist you in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lg.com/uk
(Service website : www.lg.com/uk/support)
Warranty
MODEL NO.*
6
Download PDF