ENGLISH
CAR CD/MP3/WMA Receiver
ΕΛΛΗΝΙΚΑ
P/NO : MFL63284818
PORTUGUÊS
MODEL
LCF800ON/ LCF800OR
ITALIANO
Please read this manual carefully before operating
retain
for future
reference.
your set and rt
for future
reference.
DEUTSCH FRANÇAIS ESPAÑOL
OWNER'S MANUAL
Table of Contents
3
4
5
6
7
8
9-10
10-11
11
12-13
14
15
2
Safety Note
Front Panel
Remote Control
Battery installation
About detachable control panel
Attaching the control panel
Detaching the control panel
Installation
Basic installation
Removing the existing receiver unit
ISO-DIN installation
Connection
Basic operation
Mute
Using the EQ
Using XDSS+(Extreme Dynamic Sound System)
Checking the clock
Turning off the display light
Resetting the unit
Adjusting general settings
Listening to a CD
Pausing or restarting CD playback
Searching for a section within a track /file
Checking information about your music
Playing back tracks/files in a way you want
Listening to music from an external device
Listening to the radio
Storing desired frequencies manually
Listening to a preset station
Adjusting tuner settings
Using USB device
Moving to another drive
Recording to USB from audio CD or FM tuner
Quick search of a desired file
Listening to music by connecting iPod
CAR CD/MP3/WMA Receiver
16-17 Connecting a Bluetooth wireless technology
Using the buttons for Bluetooth wireless technology
Disconnecting a phone
Answering and ending a call
Rejecting a call
Making a call saved as preset number
Checking missed calls
Saving call numbers in the latest calls
Audio transfer
Paring your unit and device with Bluetooth wireless technology
Playing MP3 files
Bluetooth wireless technology profiles information
18
Adjusting the setting (Bluetooth wireless technology)
19-21 Phone compatibility list (Bluetooth wireless technology)
22
Troubleshooting
23
Specifications
LG Electronics hereby declares that this/ these product(s) is/
are in compliance with the essential requirements and other
relevant provisions of Directive 2006/28/EC
(ANNEX I , 3.2.9), 72/245/EEC, 99/5/EC and 2006/95/EC.
European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327
AE Almere, The Netherlands
(Tel : +31-(0)36-547-8888)
The unit is compatible with the steering wheel remote control.
The function allows operation by sending the steering wheel
remote control signal to the unit.
For details, consult with your dealer.
Safety Note
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference.
Should the unit require maintenance, contact an authorized service center. Performing
controls, adjustments, or carrying out procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be
fully aware of all driving condition. Do not change settings, or any
functions. Pull over in a safe and legal manner before attempting such
operations.
Do not use for many hours at extremely low or high temperature.
(-10 °C to 60 °C)
To reduce the risk of electric shock, do not remove the cover or back
of this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose this product
to dripping or splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use
the unit after proper installation in your vehicle.
8 cm
This unit cannot play 8 cm disc (use 12 cm disc only).
“This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible threat to
human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together
with other waste. It is recommended that you use local, free reimbursement systems
batteries and accumulators.”
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
Caution
When being connected in a wrong way, the unit displays as follows.
- Antenna port short : “ANTENNA ON PORT SHORT CIRCUIT CHECK”
After connecting it again, restart the unit.
CAR CD/MP3/WMA Receiver
3
Front Panel
a [SRC] Selects function sources.
[• OFF] Power on/off.
b [DISP]
• Press it, you can check the clock time.
• Press and hold it, you can turn off the display light.
c [BX] Plays or pauses playback
d Volume knob
• Adjusts volume level.
• Confirms the settings.
• Checks tracks or files in CD mode or preset
stations in TUNER mode.
e [BAND] Selects a band.
[• TA] Traffic Announcement (OPTIONAL)
Searches stations that have TA/TP information.
f
g
h
i
j
k
l
m
n
o
p
q
[REC] Recording to USB
Display window
Remote Sensor
[OPEN] Opens the front panel.
[ ] Returns to the previous step.
[ ]Temporarily stops the sound.
[BT] Activates BT function.
[b?-/+?B]
Skip / Search / Seek / Tune
[EQ]/[• XDSS+]
Improves sound quality.
[FUNC] In each mode, sets playback items.
[• Menu] Activates setting menu.
[AUX] If connected to other portable player,
you can enjoy musics of it on the unit.
USB port
Note
Make sure to press protruded parts(Refer to the circled parts) when you want to use FUNC or
4
CAR CD/MP3/WMA Receiver
button function.
Remote Control
Battery Installation
1
a
b
c
d
e
f
g Adjusts volume level.
h [m M]
Skip / Search / Seek / Tune
[ ]
Returns to the previous step.
[v V]
• List up/ down
• Adjusts settings.
• Moves 10 MP3/WMA tracks
backward or forward if there is
no folder or one folder on a
CD.
• Moves to the previous or next
folder if there are more than 2
folders on a CD.
[ENTER/LIST]
• Confirms the settings.
• Checks tracks or files in CD
mode or preset stations in
TUNER mode.
[SRC] Selects function sources.
i [DISP]
[• OFF] Power off.
• Press it, you can check the
[• Menu] Activates setting menu
clock time.
[FUNC]
• Press and hold it, you can turn
In each mode, sets playback
off the display light.
items.
j [RPT] Repeat function
[BAND/DRV]
k [INT] Intro scan
• Selects a band.
l Numeric buttons
• Moves to a next USB drive
Selects a numbered preset sta[B/X]
tion in TUNER.
Plays or pauses playback
[SHF] Shuffle
[MUTE]
Temporarily stops the sound.
2
3
Pull out the battery holder with a
sharp product like a ball point pen.
Put the battery with
and
correctly on the battery holder.
Push the battery holder back into
its original position.
Note
• Use only one CR2025 (3 V) lithium battery.
• Remove the battery if the remote control is not used for a long period of
time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
CAR CD/MP3/WMA Receiver
5
About detachable control panel
Attaching the control panel
Detaching the control panel
1
Attach part A of the control panel to
part B of the unit.
1
Press the [OPEN] to open the control panel.
2
Attach part C of the control panel to
part D of the unit while pushing the
control panel to left.
Close the control panel.
2
Push the control panel to right.
3
4
Pull the control panel out of the unit.
Put the detached control panel into the
protective case.
B
A
D
C
3
Control panel
Caution
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the display.
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
6
CAR CD/MP3/WMA Receiver
Protective Case
Note
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
Installation
ISO-DIN Installation
Basic Installation
1
Before installing, make sure that the
ignition-switch is set to OFF and
remove the terminal of the car battery
to avoid short-circuiting.
Bend the claws
according to
the thickness
of the
dashboard
1
2
3
4
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Control panel
2
4
5
6
Control panel
1
3
2
4
3
5
6
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.
Removing the existing receiver unit
If there is already an installation
sleeve for the receiver unit in the
dashboard, it must be removed.
A
1
2
A
3
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.
CAR CD/MP3/WMA Receiver
7
Connection
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Wired remote input(Black): Hard-wired control adapter can be connected.
(Optional/Not supplied)
Wired mic
To Audio out (OPTIONAL)
Rear Left (Sub-woofer Left)
Rear Right (Sub-woofer Right)
*Sub-woofer is optional.
Front Left
Front Right
Power
Antenna
B
A
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
A8
Power Antenna(Blue)
A7
Dimmer(Pink)
A2
To Ignition(Red)
A1
Control Relay
Dimmer Switch
Ignition Switch
B 1
B 2
To Battery(+)(Yellow)
B 3
B 4
A5
Ground(-)(Black)
BATTERY
B 5
B 6
B 7
B 8
8
A3
Remote On(Blue/White)
A4
Phone Mute(Orange)
A6
Not connected
CAR CD/MP3/WMA Receiver
To Audio in (OPTIONAL)
Amplifier
(Optional)
B
B
B
B
B
B
B
B
1
2
3
4
5
6
7
8
Violet / Black Stripe : Rear Right –
Violet : Rear Right +
Gray / Black Stripe : Front Right –
Gray : Front Right +
Green/ Black Stripe : Rear Left –
Green : Rear Left +
White/Black Stripe : Front Left –
White : Front Left +
Turning off the display light
Basic Operation
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
4. Turn the unit off.
.
ON PLAYER
ON REMOTE
Any key
-
SRC
Rotate the
volume knob
Press and hold
OFF
SRC
VOLUME
1. Press and hold DISP.
2. Press and hold it again to turn it on.
Note
Under the light-off condition, press any keys, the light is turned on and then off
automatically if you don’t press it within a few seconds.
Resetting the unit
It resets the unit when it does not operate properly.
Press and hold
OFF
1. Press [OPEN] and pull out the front panel.
(Refer to page 6 for detaching the control panel.)
2. Prick the RESET hold with sharp object.
Basic operation - more you can do
Mute
1. Press on the unit(MUTE on the remote control) to cut the sound.
2. To cancel it, press again.
Using EQ(Equalizer)
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully.
Press EQ/• XDSS+ on the unit repeatedly. The indicator lights up in the following
order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off(not displayed)
Note
• When XDSS+ is set to “Off”, you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and press [SOUND], then adjust the sound level(BASS(bass), MID(middle),
TRB(treble)), it will be automatically stored for the currently selected USER
mode. Refer to the “For sound setting” for USER 1/2 mode.
Using XDSS+ (Extreme Dynamic Sound System)
It improves the treble and bass sound.
1. Press and hold EQ/• XDSS+ on the unit.
2. To cancel it, press and hold it again.
Adjusting general settings
You can adjust sound, light and other settings by using the MENU button.
On the Unit
1. Press and hold FUNC/• MENU.
2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press
it.
3. Rotate the volume knob to select the item and press it.
4. Rotate the volume knob clockwise or counterclockwise to adjust the level.
5. Press the volume knob to confirm the setting.
If you want to return to the previous step, press .
On the Remote Control
1. Press and hold FUNC/• MENU.
2. Press v or V to select [SOUND], [LIGHT], or [OTHER] and press ENTER.
3. Press v or V to select the mode and press ENTER.
4. Press v or V to adjust the level.
5. Press ENTER to confirm the setting.
If you want to return to the previous step, press .
For Sound setting
You can adjust sound quality by adjusting the level of BAL(left/right speaker),
FAD(front/rear speaker) and S--W(Sub-woofer:optional).
Checking the clock
1. Press DISP once to check the clock.
2. Press it again to remove it.
CAR CD/MP3/WMA Receiver
9
For Light setting
You can adjust the light effects by adjusting LED, DIM, or DIM L.
LED COL1/ COL2/ AUTO: You can change the LED window color.
DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO,
the dimmer operates according to the car dimmer setting.
DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2)
Listening to a CD
ON PLAYER
OPEN
1. Open the front panel.
Rotate the
volume knob
2. Insert a CD.
3. Adjust the volume.
ON REMOTE
VOLUME
For Other setting
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre.
SW(Subwoofer) OFF / SW 55HZ / SW 85HZ / SW 120 HZ
You can enable the subwoofer.
SW OFF <-> SW 55HZ <-> SW 85HZ <-> SW 120 HZ.
DEMO OFF/ ON
You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source.
CLK(Clock)
For the model RDS is not supported or even for a RDS supported unit, when
RDS CT information is not received and then you set CT on the setting menu
to OFF, you can adjust the time by yourself. Refer to the page 12 for setting
the CT(Clock Time) ON/OFF.
Listening to a CD - more you can do
Note
Make sure to press Z after pressing OPEN to release a
disc. Refer to the picture on the left.
Pausing or restarting playback
1. Press B[] on the player (B
B/[] on the remote control) during playback.
2. Press it to resume playback.
Searching for a section within a track / file
1. Press and hold b?- or +?B on the player (m or M on remote control) for
about 1 second during playback.
2. Press B[] on the player (B
B/[] on the remote control) at the point you want.
Skipping to another track/ file
Press b?- or +?B on the unit (m or M on remote control.).
Or
1. Press the volume knob on unit or ENTER on the unit.
2. Rotate the volume knob on unit or press v or V on the remote control to
select a desired track or file.
2. Press ENTER (or the volume knob) to start playback.
Note
To skip to previous track, press briefly b?- within 3 seconds of playing time.
Checking information about your music
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no
information, “NO TEXT” will be shown in the display window.
10
CAR CD/MP3/WMA Receiver
Playing back tracks/files in a way you want
On the Unit
1. Press FUNC/• MENU.
2. Rotate the volume knob to select an item and press it.
4. Rotate the volume knob to set the option.
5. Press the volume knob to confirm the setting.
If you want to return to the previous step, press .
On the Remote Control
1. Press INT/RPT/SHF.
2. Press it again to cancel.
Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no
right to grant such permission. Permission should always be sought from
the copyright owner.
Listening to music from
an external device
Or
1. Press FUNC/• MENU.
2. Press v or V to select an item and press ENTER.
3. Press v or V to set the option.
5. Press ENTER to confirm the setting.
If you want to return to the previous step, press .
INT (Intro Scan)
Each files in the current selected folder (
INT) or the first 10 seconds of
each tracks/files (INT) on the disc are played.
RPT (Repeat)
The current selected tracks/files (1 RPT) or folder (
played repeatedly.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
RPT) on the disc is
SHF (Shuffle)
Each files in the current selected folder (
SHF) or all of the tracks/files
(SHF) on the disc is played randomly. During random playback, even if you
press b?- , you won’t go back to the previous track.
Note
•
: The icon is displayed during MP3/WMA playback.
• MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 kHz to 48 kHz (MP3) 22.05 kHz to 48kHz (WMA)
2. Bit rate / within 8 kbps to 320 kbps (include VBR) (MP3) 32 kbps to
320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it will not be possible to playback
MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
1. Connect an external device to
the AUX jack with line input
cable.
2. Select a source to AUX.
3. Play the connected Auxiliary
Equipment.
4. Adjust the volume.
ON PLAYER
-
ON REMOTE
-
SRC
SRC
-
-
Rotate the
volume knob
VOLUME
Listening to music from a portable player more you can do
Preventing radical changes in volume as switching sources
Only when you set AUX to ON as switching sources, you can adjust the volume
level of each source to prevent radical changes in volume by selecting GAIN
LOW or HIGH.
1. Press FUNC/• MENU.
2. Rotate the volume knob on unit or press v or V on the remote control to set
the option(GIN L/H).
3. Press the volume knob on unit or ENTER on the remote control to confirm
the setting.
4. If you want to return to the previous step, press
.
CAR CD/MP3/WMA Receiver
11
Adjusting TUNER settings
Listening to the radio
ON PLAYER
ON REMOTE
SRC
SRC
2. Select a band.
BAND
BAND
3. Auto seek.
Manual seek.
b?-/+?B
Press and hold
b?-/+?B
m/M
Press and hold
m/M
1. Select a source to tuner.
Listening to the radio - more you can do
Storing desired frequencies manually
1. Press BAND to select a desired band you want to store.
2. Press and hold b?- or +?B on the unit or m or M on the remote control
until the beep sound is heard.
3. Press it repeatedly to select a desired frequency.
4. Press and hold one of preset buttons among 1 to 6 until the beep sound is
heard.
5. Repeat steps 1 to 4 to preset other stations.
Note
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is automatically erased.
Listening to a preset station
1. Press BAND to select a desired band.
2. Press the volume knob on the unit or ENTER on the remote control.
3. Rotate the volume knob on the unit or press v or V on the remote control to
select a preset station.
4. Press the volume knob on the unit or ENTER on the remote control.
Or
Press BAND and then the desired preset button among 1 to 6 on the remote
control.
12
CAR CD/MP3/WMA Receiver
On the Unit
1. Press FUNC/• MENU.
2. Rotate the volume knob to select an item and press it.
3. Rotate the volume knob to set the option and press it.
4. If you want to return to the previous step, press .
On the Remote Control
1. Press FUNC/• MENU.
2. Press v or V to select an item and press ENTER.
3. Press v or V to set the option and press ENTER.
4. If you want to return to the previous step, press .
PTY (Program type) (OPTIONAL)
It searches the radio stations by program types of FM tuner.
The program types are displayed as follows.
NEWS
VARIED
LEISURE
AFFAIRS
WEATHER
DOCUMENT
INFO
FINANCE
POP M
SPORT
CHILDREN
ROCK M
EDUCATE
SOCIAL
EASY M
DRAMA
RELIGION
LIGHT M.
CULTURE
PHONE IN
CLASSICS
SCIENCE
TRAVEL
OTHER M
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
PI (Programme Identification) SOUND / MUTE (OPTIONAL)
PI SOUND : When the frequency of a tuned station switches to an
AF(Alternative frequency) with an unidentified PI, it keeps the sound.
PI MUTE : When the frequency of a tuned station switches to an AF with an
unidentified PI, it mutes the sound until the PI is identified.
CT (Clock Time) ON/OFF (OPTIONAL)
You can use the RDS CT information to update the time. When RDS CT
information is not received and then you set CT to OFF, you can adjust the
time by yourself. Refer to the page 10 for setting the clock.
TA(Traffic Announcement) ALARM / SEEK (OPTIONAL)
TA ALARM : When the tuned station has no TP information for 5 seconds,
a double beep sound is output.
TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information.
REG (Region) ON / OFF (OPTIONAL)
REG ON : The unit switches to another station, within the same network,
broadcasting the same program when the receiving signals from the current
station become weak.
REG OFF : The unit switches to another station, within the same network
when the receiving signals from the current station become weak. (This mode,
the program may differ from the one currently received.)
AF(Alternative frequency) ON / OFF (OPTIONAL)
When the reception quality drops, the tuner automatically changes to another
station in the network, broadcasting a better reception quality, using the PI
and AF codes.
SENS(Tuner sensitivity) MID/ HI/ LOW
In a area in which signal reception is weak, it helps the tuner to search more
stations. The weaker the reception is, the lower option you should set to.
PS(Preset scan)
Each preset station appears. To cancel, press ENTER (or the volume knob).
AS (Auto Store)
The six strongest broadcasting frequencies will be stored under preset button
1 to 6 in the order of their signal strength.
To cancel, press ENTER (or the volume knob).
CAR CD/MP3/WMA Receiver
13
Quick search of a desird file
Using an USB device
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
You can select and play a desird file regardless of the order in USB.
ON PLAYER
ON REMOTE
-
-
Rotate the
volume knob
VOLUME
Using an USB device - more you can do
Moving to another drive
When connecting this unit to multi reader, press BAND (BAND/DRV on remote
control) to go to the next drive. Each time you press the button, the driver
modes changes.
Note
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Other functions are same with “Listening to a CD - more you can do”.
Refer to page 10.
Recording to USB from audio CD or FM tuner
1. Open the USB cover and connect it to the unit.
2. Select audio CD or FM tuner.
3. Start playback.
4. Press REC to start recording.
For one track CD recording, press it once.
For all tracks recording, press and hold it until the beep is heard.
5. Press it again to stop.
Note
• Only in audio CD and FM tuner, recording is available.
• Do not remove the USB device during recording, or an incomplete file may be
made and not deleted on PC.
• When USB memory is full, “Memory Full” displays and stops recording.
• For tuner recording, the broadcastings are recorded by 20 moments on a file
name.
14
CAR CD/MP3/WMA Receiver
1. Press ENTER (or the volume knob) to check all files.
2. Rotate the volume knob on unit or press v or V on the remote control to
select a desired file.
3. Press ENTER (or the volume knob) to start playback.
Note
• Press and hold ENTER (or the volume knob) to check all folders. Then,
repeat the previous steps from 1 to 3 for playing a desired file.
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Other functions are same with “Listening to a CD - more you can do”.
Refer to page 10.
Look out for the following
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used as
a storage device.
Listening to music by connecting iPod
You can enjoy iPod-stored music on the unit by connecting it to the USB
connector using the appropriate cable.
Playing back files in a way you want
On the Unit
1. Press FUNC/ • MENU.
2. Rotate the volume knob to select an item and press it.
3. Rotate the volume knob to set the option.
4. Press the volume knob to confirm the setting. If you want to return to the
previous step, press .
On the Remote Control
1. Press RPT/SHF.
2. Press it again to cancel.
Not Supplied
ON PLAYER
-
ON REMOTE
-
2. Connect the iPod.
-
-
3. Adjust the volume.
Rotate the
volume knob
1. Open the USB cover.
VOLUME
Note
• If the iPod is already connected, press SRC to select a source to USB.
• Refer to the page 23 to check the compatible iPod model for this unit.
Listening to music by connecting iPod
- more you can do
Pausing or restarting playback
Press B[] on the player (B
B/[] on the remote control) during playback. Press this
button again to resume play.
Checking information about your music
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA file playback. If there is no information,
“NO TEXT” will be shown in the display window.
Or
1. Press FUNC/• MENU.
2. Press v or V to select an item and press it.
3. Press v or V to set the option.
4. Press ENTER to confirm the setting. If you want to return to the previous
step, press .
PRT (Repeat)
The current selected tracks/files (1 RPT) on the iPod is played repeatedly.
During playback, if you press b?- or +?B , you won’t go back to the previous or
next track.
SHF (Shuffle)
Each file in the currently selected album (
(SHF) on the iPod are played randomly.
SHF) or all of the tracks/files
SPD (BOOK SPEED)
You can adjust the the audiobook speed of iPod to NOR(Normal), SLOW, or
FAST.
Playing back files by music menus
You can check files by music menus and play it back.
The music menus are as follows.
PLAYLISTS t ARTISTS t ALBUMS t GENRES t SONGS t
COMPOSER t AUDIO BOOK t PODCASTt...
1. Press the volume knob on the unit or ENTER on the remote control.
2. Rotate the volume knob on the unit or press v or V on the remote control to
select a music menu and press it.
3. Rotate the volume knob on the unit or press v or V on the remote control to
select a file.
4. Press the volume knob on the unit or ENTER on the remote control to confirm
the setting. If you want to return to the previous step, press .
CAR CD/MP3/WMA Receiver
15
Connecting a Bluetooth wireless technology
Before you start the pairing procedure, make sure the Bluetooth wireless technology is turned on in to your phone. Refer to your phone’s user
guide. Pairing links your unit and phone with Bluetooth wireless technology, and is required only once for the initial setup. If the connection is successful, the phone is registered (Device 1–5) and the flashing of indicator
stops on the unit. The process of pairing may be different depend on the
phones. The PIN CODE is 1234.
Using the buttons for Blutetooth wireless technology
a
ON PLAYER
1. Enter the menu.
2. Find the “CONNECTION” menu.
BT
Rotate the
volume knob
3. Search the phones supported Bluetooth
wireless technology.
Press the
volume knob
4. Select a phone you want to connect.
Rotate the
volume knob
c
5. Connect the phone.
Press the
volume knob
d
6. Select the “CONN” menu.
Press the
volume knob
Note
• If you power off the unit while talking on the phone through the unit by using
the BT function, the function is deactivated and you can talk on the phone
directly.
• The microhphone needs to be close to and pointed toward the person
speaking. Install the microphone as shown below.
Microphone unit (supplied)
16
CAR CD/MP3/WMA Receiver
b
a • Press the volume knob: Go to the next contents of the setting.
• Rotate the volume knob : Move the contents vertically on the setting or
choose a spell when you write the words on the unit.
b
: Returns to the previous step.
c BT : Press it to enter BT function.
d Adjusts the mic volume while talking on the phone by BT function.
• b?- : Press it to delete a spell or go back previous contents. Press more 1
second to delete all words entered on display when you write some
words on the unit.
• +?B : When you write some words on the unit, press it to move next space
on display.
Using a Bluetooth wireless technology more you can do
Disconnecting a phone
Go to the menu (BT -> CONN -> Connected device name -> DISCONNECT).
Answering and Ending a call
When your unit rings, press BT to answer a call.
To end a call, press and hold BT.
Saving call numbers in the latest calls
You can easily save up to 6 phone numbers in the latest calls. Go to the menu
(CALL -> RECEIVED or MISSED -> Rotate the volume knob to select the phone
number you want to save -> SAVE -> select 1 to 6).
Audio transfer
It is possible to switch the audio connection between your phone equipped with
Bluetooth wireless technology and this unit.
1 Press BT to answer the call.
2 Press BT again. The “PRIVATE” is displayed.
If the private mode is selected on the unit, press BT to return to the call to
hands-free mode.
Rejecting a call
When your unit rings, press and hold BT.
Paring your unit and device with Bluetooth wireless technology
(MP3 Player, MP3 Phone...)
Making a call saved as a preset number
When you activate your Bluetooth device’s linked unit, you can listen to MP3 with
wireless connections. The method of use for a Bluetooth device is the same as
when using a Bluetooth phone. Refer to the phone’s user guide for using this
function.
Press BT and a preset number (1 to 6).
Checking missed calls
When an incoming call is not answered, the missed call message is displayed
Playing MP3 files
on the display window (without headset profile). When the “
” appears, go to
the menu (BT -> CALL -> MISSED). You can check the list of missed call. To
place a call, press BT. And to end the call and hang up the phone, press and
hold BT.
When you turn Bluetooth on, your device supported Bluetooth wireless technology
displays “Bluetooth” on the home screen. The Bluetooth remains on until you turn the
device off. Press SRC repeatedly to select “BT MUSIC”. To play an MP3 file stored
on your device. Refer to the phone’s user guide for using this function.
Note
• The lists of Missed calls, Dialled calls and Received calls are sorted from
newest to oldest entries.
• When you want to make an international call, press +?B to add “+” and to
delete it press again.
• “+” can only be added when the detail list of Missed call, Dialled call or
Received call is selected.
• Rejecting a call / Making a call saved preset number / Missed call notification
(These features are only available on phones with Headset profile.)
Bluetooth wireless technology profiles information.
In order to use Bluetooth wireless technology, devices must be able to interpret
certain profiles. This unit is compatible with following profiles.
GAP (Generic Access Profile)
HFP (Hands Free Profile)
HSP (Hands Set Profile)
GAVDP (Generic Audio/Video Distribution Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Distribution Remote Control Profile)
OPP (Object Push Profile)
CAR CD/MP3/WMA Receiver
17
Adjusting the setting.
BT
CALL
(Bluetooth wireless technology)
RECEIV
DIALED
MISSED
PRESET
REDIAL
DIAL
P--BOOK
LIST
SEARCH
GET (ADD)
CONN
Connected
Device
Name
SETUP
VISIBL
Searches the phone number in the list. (English and Russian only)
Press +?B longer than 1 second to change the languages between Russian and English.
GET : Getting the Phonebook from the phone automatically.
(This menu is only available with phones supported this function.)
ADD (Under disconnection) : PHONEBOOK -> ADD-> Press PWR -> “000/500” will be
displayed. Then send the phonebook data from your phone. Depend on your phone, the
sending process is different. Refer to your phone’s guide.
Connected Device Name will be displayed.
When the unit is not under connection, you can search the phones available to connect.
Select the register in the Connection contents.
Makes it is impossible to search this unit. (SHOWN <-> HIDDEN)
ANSWER
Adjusts answering automatically or not. (AUTO <-> MANUAL)
NAME
ADDR
CAR CD/MP3/WMA Receiver
Enters the number directly on the unit. To select the 1 to 10 rotate the volume. Press +?B
to make the phone number. To call it, Press BT.
Checks the list of the phone numbers saved by phonebook.
Adjusts connection with automatically or not. (AUTO <-> MANUAL)
PIN
18
Checks and deletes the phone number saved preset number. To delete the phone
number, select the preset number by rotating the volume knob. And then press the
volume knob. Press the volume knob again when the “DELETE” is displayed.
Adjusts the counts of redial. (1 TIME <-> 2 TIMES.)
A--CONN
MIC
INFO
RECEIVED/DIALED/MISSED Phone number list.
• To call the phone number, select the phone number and press BT.
• To save it, select the phone number and press the volume knob. “SAVE” will be
shown. Press the volume knob again. Rotate the volume knob to select a preset
number(1 to 6). Press the volume knob again. The phone number be saved.
Adjusts microphone volume on the phone from 1 to 5. While you are on the phone with
bluetooth wireless technology, rotate the volume knob to adjust the MIC volume.
Changes the name of this unit.
Changes the PIN code. Default is 1234.
Checks the address.
Phone compatibility list
H : Handsfree
A : Audio Streming (A2DP)
Bluetooth list and manufacturing
company applicable.
Company
List
H
Nokia
3230
3250
3650
5300
6021
6103
6120
6131
6230
6270
6280
6300
6500
6600
6630
6650
6670
6680
6681
6820
7370
7380
7610
7650
7600
8600
8800
9500
3650 (Italy)
5500 SPORT
6230i
6820a
7500prism
7650 (Italy)
8910i
9300I
E50
E51
E60
E61
E62
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
A
O
O
O
O
O
O
P
V
Company
Nokia
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
(Bluetooth wireless technology)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Motorola
P : Phonebook Sync (GET)
V : Object Push(Vcard, ADD)
List
E70
E71
E73
E90
N70
N71
N73
N77
N80
N82
N90
N91
N92
N93
N95
N-Gage
N-Gage QD
E63
N72
N97
N81
N85
N86 8MP
N95
N96
5530
5310
5320
5800i
5800
6120C
6303C
2630
6110 Navigator
6288
E65
E75
A1000
A780
E1000
E1070
H
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
A
O
O
O
P
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
V
Company
List
H
O
O
O
O
O
O
Motorola
E398
E550
E680
E680i
KRZR K1
L72
RAZR V3
RAZR V3i
RAZR V3X
RAZR V9
RIZR Z3
RIZR Z8
ROKR E2
ROKR E6
SLVR L7
U6
V195
V360
V3ROHS
V500
V525
V600
A1600
A1890
V8
A1200
V6
W510
K610i
K618i
K700i
K750i
K770i
K800i
K850i
M600i
P1i
P990i
S500i
S700i
T610
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
SONY
ERICSSON
O
O
O
O
O
O
O
O
O
A
O
O
O
O
O
O
O
O
O
P
V
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
CAR CD/MP3/WMA Receiver
19
H : Handsfree
A : Audio Streming (A2DP)
Bluetooth list and manufacturing
company applicable.
Company
List
H
SONY
ERICSSON
T68i
V600
V800
W550i
W710i
W800i
W810i
W850i
W980i
Z1010
Z600
W300
W880
W910
Z610
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
D500
D600
D820
D900
E770
E900
i600
T509
X820
Z540V
A707(SYNC)
S5230
D900
i8910
S8003
S8300
E950
F210
F300
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
SAMSUNG
1.
2.
3.
4.
A
O
O
O
P
V
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Company
SIEMENS
BLACK
BERRY
HP
P : Phonebook Sync (GET)
V : Object Push(Vcard, ADD)
List
H
A
G600
i900
L600
U600
U700
Z170
T509
O
O
O
O
O
O
O
O
O
O
O
O
O
EF81
S55
S65
S88
SK65
SL75
SX1
SXG75
O
O
O
O
O
O
O
O
8800
8100(PEARL)
8707v
BOLD 9000
Curve 8310
O
O
O
O
O
HW6915
iPAQ h6315
O
O
P
O
O
O
V
Company
List
H
A
O
O
O
O
O
O
O
LG
CU500
KE970
KG245
KG800
U880
U890
M4410
KF600
KE850 PRADA
KG290
KE500
KM500
KU990 VIEWTY
KU580
KU970
KU960
U370
KE770
GD900
KF900 Prada
KC910 Renoir
KM900 Arena
KS10
KU250
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
N750
N930
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
PALM
Treo750v
O
O
O
PHILIPS
O2 Xda Atom
O
O
O
SHARP
GX15
GX25
O
O
O
O
I-MATE
K-JAM
O
O
PANTECH
PG-6200
PG-8000
O
O
O
O
O
HTC
Touch
Touch Pro
O
O
O
O
O
O
NEC
SAGEM
MYX6-2
O
Apple
iPhone
iPhone 3G
iPhone 3GS
O
O
O
Note
When the phone features <Bluetooth Power Save> function, you should make the function turned on to maintain connection.
When you switch the call mode from handsfree to phone, the connection may be disconnected.
Some phones don’t support Reject function.
Low battery in phone may cause the problems.
20
CAR CD/MP3/WMA Receiver
P
V
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
“The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under
license. Other trademarks and trade names are those of their respective owners.”
Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters.
Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can
be operated via the Cascade if the connection was made via Bluetooth® wireless technology.
Operating condition for using a Bluetooth wireless technology function
- Close windscreen.
- Turn off the air conditioner/ heater.
- Stop the vehicle or drive at low speed.
- Make the call in a quiet location.
• There may be differences in call quality depending on phone type, road conditions weather, etc.
• Using the phone while driving may cause unexpected accidents.
• The Bluetooth wireless technology function may not operate properly with certain types of phones equipped with Bluetooth wireless technology.
CAR CD/MP3/WMA Receiver
21
Troubleshooting
Symptom
General
Power doesn’t turn on / The
unit doesn’t operate.
Cause
Leads and connectors are not properly.
The fuse is blown.
CD
Radio
Noise and other factors are causing the builtin microprocessor to operate incorrectly.
No sound is heard / The vol- Cables are not connected correctly.
ume level will not rise.
There’s audio skipping.
This unit is not firmly secured.
The playback is not
The disc is dirty.
possi ble.
The loaded disc is of a type this unit cannot
play.
Radio stations cannot be
The signal strength of the stations is too
tuned in.
weak(when tuning in with automatic tuning.)
Connect the cables correctly.
Secure this unit firmly.
Clean the disc.
Check what type the disc.
Tune in the stations manually.
Preset the stations.(Refer to the page 12)
Check whether iPod is connected to the unit
correctly.
Connect it to the unit correctly.
iPod does not work.
Remote
control
The unit does not operate
Battery power is low.
correctly even when the
appropriate remote
control buttons are pressed.
CAR CD/MP3/WMA Receiver
Confirm once more that all connections are
correct.
Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to
install the correct fuse with the same rate.
Turn the unit off and then on.
No station has been preset or preset stations
have been cleared(when tuning by scanning
preset stations.)
iPod
22
Correction
Load a new battery.
Specifications
Compatible iPod models
General
Output Power
Power Source
Speaker impedance
Ground System
Dimensions (W x H x D)
Net Weight
Tuner
FM
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
AM (MW)
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
CD
Frequency Response
S/N Ratio
Distortion
Channel Separation (1 kHz)
AUX
Frequency Response
S/N Ratio
Distortion
Channel Separation (1 kHz)
Max Input Level (1 kHz)
Bluetooth
TX POWER
Frequency Range
Version
USB
Version
Line OUT
Frequency Response
Output Voltage
Subwoofer (optional)
Frequency Response
Output Voltage
53 W x 4 CH (Max.)
DC 12V
4Ω
Negative
178 x 50 x 169 mm (Without Control Panel)
1.35 kg
87.5 MHz to 107.9 MHz, 87.5 MHz to 108 MHz,
65 MHz to 74 MHz or 87.5 MHz to 108 MHz
55 dB
0.7 %
12 dBμV
520 kHz to 1720 kHz or 522 kHz to 1620 kHz
50 dB
1.0 %
28 dBμV
•
•
•
•
•
•
iPod
iPod
iPod
iPod
iPod
iPod
touch
classic
with video (5th generation)
nano (1st generation)
nano (2nd generation)
nano (3rd generation)
“Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod
and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
20 Hz to 20 kHz
80 dB
0.12 %
55 dB
20 Hz to 20 kHz
80 dB
0.1 %
45 dB
1.1 V
Designs and specifications are subject to change without notice.
4 dBm
2402 MHz to 2480 MHz
Bluetooth Specification 2.0 + EDR
The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.
USB 1.1
20 Hz to 20 kHz
2 V (Max.)
20 Hz to 120 Hz
2.0 V (Max.)
Be responsible
Respect copyrights
CAR CD/MP3/WMA Receiver
23
Download PDF

advertising