LG | NB2020A | LG NB2020A Owner’s Manual

ENGLISH
OWNER’S MANUAL
Sound Bar System
Please read this manual carefully before operating
your set and retain it for future reference.
FOR THE WARRANTY TERMS & CONDITIONS,
PLEASE REFER TO INNER PAGE OF BACK COVER.
NB2020A
NB2020A-N0_DGBRLLK_ENG_3539.indd 1
2014-07-22
9:56:46
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NB2020A-N0_DGBRLLK_ENG_3539.indd 2
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. hen installing the product, ensure
that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
2014-07-22
9:56:46
Getting Started
Disposal of your old appliance
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3.The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product it
means they are covered by European
Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or the
local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
LG Electronics hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and other
relevant provisions of Directive 2004/108/
EC, 2006/95/EC and 2009/125/EC.
European Standards Centre:
Krijgsman1, 1186 DM Amstelveen The Netherlands
yy Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
1
Getting Started
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
3
POWER: This unit operates on a mains supply of
200-240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS
1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied is
not suitable for the mains sockets in your home,
then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions
below:
Warning: A mains plug removed from the mains
lead of this unit must be destroyed. A mains plug
with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the
earth symbol or coloured green or green and
yellow. If any other plug is fitted, use same rating
of fuse in the plug.
Important: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may
not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your city
office, waste disposal service or the
shop where You purchased the product.
NB2020A-N0_DGBRLLK_ENG_3539.indd 3
2014-07-22
9:56:46
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6Accessories
6Introduction
6
– Symbols Used in this Manual
7
Remote control
8
Front panel
8
Rear panel
9
Installing the sound bar
9
Installing the cover foot
3Operating
12Operations
12 – DOLBY DRC (Dynamic Range
Control)
12 – AV Sync
12 – AUTO POWER DOWN
12 – AUTO POWER On/Off
12 – Turn off the sound temporarily
13 Controlling a TV with the Supplied
Remote Control
4Troubleshooting
14Troubleshooting
2Connecting
10
11
11
Mounting the main unit on a wall
Optional Equipment Connection
– OPTICAL In connection
NB2020A-N0_DGBRLLK_ENG_3539.indd 4
2014-07-22
9:56:47
Table of Contents
5
5Appendix
15Maintenance
15 – Handling the Unit
16 Trademarks and Licenses
17Specifications
1
6Warranty
2
18Warranty
3
4
5
NB2020A-N0_DGBRLLK_ENG_3539.indd 5
2014-07-22
9:56:47
6
Getting Started
Accessories
Introduction
Please check and identify the supplied accessories.
Symbols Used in this Manual
1
Getting Started
,,Note
Indicates special notes and operating features.
>>Caution
Remote control (1)
Batteries (1)
Wall Mount Bracket
Installation Template
(1)
Wall bracket (2)
Optical cable (1)
Cover foot (2)
NB2020A-N0_DGBRLLK_ENG_3539.indd 6
Indicates cautions for preventing possible damages
from abuse.
2014-07-22
9:56:48
Getting Started
Remote control
7
• • • • • • • • • • a • • • • • • • • • •
1 (Power): Switches the unit ON or OFF.
DOLBY DRC (ON/ OFF) : Sets the Dobly DRC.
• • • • • • • • • • b • • • • • • • • • •
VOL -/+ : Adjusts speaker volume.
AV SYNC -/+ : Synchronizes the audio and video.
,,Note
1
Getting Started
: Mutes the sound.
yy When the volume reaches the highest/
lowest level and you push VOL+/- on the
remote control again, red LED on the unit
turns on for 2 seconds to signal on what the
volume level is.
yy When the unit turns on, volume of the unit
will rise gradually to the volume level set at
the unit turned off.
• • • • • • • • • • c • • • • • • • • • •
TV Control buttons: See page 13.
AUTO POWER (ON/OFF) : This function is
automatically turned on the unit.
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert (size AAA) battery with
and matched correctly.
NB2020A-N0_DGBRLLK_ENG_3539.indd 7
2014-07-22
9:56:49
8
Getting Started
Front panel
1
Getting Started
A 1 (Standby/On)
B – / + (Volume)
Adjusts speaker volume.
Rear panel
A S/W Download Connector - Only for service.
NB2020A-N0_DGBRLLK_ENG_3539.indd 8
B OPTICAL IN
2014-07-22
9:56:49
Getting Started
Installing the sound
bar
Installing the cover
foot
You can hear the sound by connecting the unit to
the other device : TV, Blu-ray disc player, DVD player,
etc.
You can extend the height of the unit.
9
1
Getting Started
Place the unit in front of the TV and connect it to
the device you want. (Refer to page11)
1. Turn the unit upside down.
2. After detaching a release layer on the cover
foot, Put it on the foot of the unit.
3. Make the cover foot attached firmly to the unit
by pushing it strongly.
NB2020A-N0_DGBRLLK_ENG_3539.indd 9
2014-07-22
9:56:49
10
Connecting
Mounting the main
unit on a wall
You can mount the main unit on a wall.
Prepare screws and brackets.
2. When you mount it on a wall (concrete), use
the wall plugs (Not supplied). You should drill
some holes. A guide sheet (Wall Mount Bracket
Installation Template) is supplied to drill. Use the
sheet to check the point to drill.
Wall Mount Brac
ket Installation
Template
Unit
2
Connecting
Wall Mount Bracket
Installation Template
Wall bracket
,,Note
1. Match the TV’s BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
of TV and attach to the position.
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting. Please
purchase it.
TV
NB2020A-N0_DGBRLLK_ENG_3539.indd 10
2014-07-22
9:56:50
Connecting
3. Remove the Wall Mount Bracket Installation
Template.
11
,,Note
Detach the unit from the bracket as shown
below.
4. Fix it with screws (not supplied) as shown in the
illustration below.
2
Connecting
Optional Equipment
Connection
OPTICAL In connection
Connect an optical output of external devices to
the OPTICAL IN connector.
5. Hang the main unit onto the bracket as shown
below.
To the digital
optical output
jack of external
device
>>Caution
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
NB2020A-N0_DGBRLLK_ENG_3539.indd 11
2014-07-22
9:56:52
3Operating
12
Operating
Operations
DOLBY DRC (Dynamic Range
Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to the DOLBY DRC by
pressing DOLBY DRC ON.
To cancel the DOLBY DRC, press DOLBY DRC OFF.
AV Sync
3
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
Operating
Use AV SYNC -/+ to scroll up and down through
the delay amount, which you can set at anything
between 0 and 300ms.
,,Note
When the AV SYNC reaches the highest/lowest
level and you push AV SYNC -/+ on remote
control again, red LED on the unit turns on for
2 seconds to signal on what the AV SYNC level
is.
AUTO POWER On/Off
This function is automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
player, Blu-ray player etc.) connected to the unit
by optical cable. Turn on this function by pressing
AUTO POWER ON.
To cancel it, press AUTO POWER OFF.
,,Note
If you don’t connect external device to the unit
by optical cable or there is no digital input, the
unit is turned off after 15 minutes when you
turn on this function.
Turn off the sound temporarily
Press
to mute your unit.
You can mute your unit, for example, to answer the
telephone.
,,Note
Red LED on the unit blinks at intervals of 2
seconds to signal that the unit is in mute
mode.
AUTO POWER DOWN
This unit turns off automatically to save power
consumption if no signal is transmitted to the unit
for about 25 minutes.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
NB2020A-N0_DGBRLLK_ENG_3539.indd 12
2014-07-22
9:56:52
Operating
13
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
(LG TV only.)
3
Operation
MUTE
Turn the TV’s volume on or
off
INPUT
Switch the TV’s input source
between the TV and other
input sources.
1 (TV POWER)
Turn the TV on or off.
VOL +/–
Adjust the volume of the
TV.
PR/CH w/s
Scan up or down through
memorized channels.
Operating
Button
,,Note
yy Depending on your TV being connected,
you may not be able to control your TV
using some of the buttons.
yy The remote control of the unit performs
basic operation of your TV. Please use the
TV’s remote control to enjoy advanced
operation of your TV.
NB2020A-N0_DGBRLLK_ENG_3539.indd 13
2014-07-22
9:56:52
14
Troubleshooting
Troubleshooting
PROBLEM
CORRECTION
Plug in the power cord.
No Power
No sound
Check the condition by operating other electronic devices.
Check the OPTICAL IN connection.
The remote control is too far from the unit.
The remote
control does
not work
properly.
Operate the remote control within about 23 ft (7m).
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The battery in the remote control is exhausted.
Replace the batteries with new one.
4
The AUTO
POWER
function does
not work.
Depending on the connected device by the optical cable, this function may not operate.
Troubleshooting
Check the details below and adjust the unit according to them.
When you
sense that
outputted
sound of the
unit is low.
yy Switch [ON] state of DRC function to [OFF] by using remote controller.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV
Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
NB2020A-N0_DGBRLLK_ENG_3539.indd 14
2014-07-22
9:56:52
Appendix
15
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Appendix
NB2020A-N0_DGBRLLK_ENG_3539.indd 15
5
2014-07-22
9:56:52
16
Appendix
Trademarks and
Licenses
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
5
Appendix
NB2020A-N0_DGBRLLK_ENG_3539.indd 16
2014-07-22
9:56:53
Appendix
17
Specifications
General
Power requirements
AC 200 - 240 V , 50 / 60 Hz
Power consumption
11 W
Dimensions (W x H x D)
(900 x 59 x 85) mm
Net Weight (Approx.)
2.6 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN)
3 V (p-p), Optical jack x 1
Amplifier
Stereo mode
20 W + 20 W (6 Ω at 1 kHz)
Designs and specifications are subject to change without prior notice.
5
Appendix
NB2020A-N0_DGBRLLK_ENG_3539.indd 17
2014-07-22
9:56:53
18
Warranty
Technology with the human touch
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12
months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of
this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made in
accordance with the published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the
apparatus, or if non standard components are used or if the serial number of the apparatus is removed, defaced,
misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally
purchased. The dealer may, before carrying out service under guarantee, require a receipted account as evidence of
the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in
use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
6
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG
to assist you in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
Warranty
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lg.com/uk
(Service website : www.lg.com/uk/support)
NB2020A-N0_DGBRLLK_ENG_3539.indd 18
2014-07-22
9:56:53
NB2020A-N0_DGBRLLK_ENG_3539.indd 19
2014-07-22
9:56:53
NB2020A-N0_DGBRLLK_ENG_3539.indd 20
2014-07-22
9:56:53
Download PDF

advertising