LG | ND2531 | LG ND2531 Owner’s Manual

ENGLISH
OWNER’S MANUAL
Wireless Speaker for
Android Dock
MUSIC IN STYLE
Please read this manual carefully before operating
your set and retain it for future reference.
FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO
BACK COVER.
ND2531
ND2531-BE.BGBRLLK_ENG_7409.indd 1
2013-08-19
5:35:18
2
Getting Started
Safety Information
1
CAUTION
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
Getting Started
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where
the cord exits the appliance. To disconnect power
from the mains, pull out the mains cord plug. When
installing the product, ensure that the plug is easily
accessible.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
This device is equipped with a portable battery or
accumulator.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
NOTICE : For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom of the
apparatus.
ND2531-BE.BGBRLLK_ENG_7409.indd 2
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
2013-08-19
5:35:18
Getting Started
CAUTION:
yy The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
yy Only use the AC adaptor supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.
yy To avoid fire or electric shock, do not open the
unit. contact to qualified personnel only.
yy Do not leave the unit in a place near the heating
appliances or subject to direct sunlight, moisture,
or mechanical shock.
yy Do not leave the unit on an unstable place such
as high shelves. It may fall down because of the
vibration of the sound.
Disposal of your old appliance
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
1
Getting Started
yy No naked flame sources, such as lighted candles,
should be placed on the apparatus.
3
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
ND2531-BE.BGBRLLK_ENG_7409.indd 3
2013-08-19
5:35:18
4
Getting Started
POWER: This unit operates on a mains supply
of 100-240V, 50/60Hz.
1
Getting Started
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the following address for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact office for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yy Please note that this is NOT a Customer
Service contact point. For Customer Service
Information, see Warranty Card or contact the
dealer that you purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20cm between the
radiator and your body.
ND2531-BE.BGBRLLK_ENG_7409.indd 4
WIRING: This unit is supplied with a BS 1363
approved main plug. When replacing the
fuse, always use of the same rating approved
to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse
cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in
your home, then the plug should be removed
and a suitable type fitted. Please refer to the
wiring instructions below:
WIRING: A mains plug removed from the
mains lead of this unit must be destroyed. A
mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured
green or green and yellow. If any other plug is
fitted, use same rating of fuse in the plug.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this
unit may not correspond with the coloured
marking identifying the terminals in your plug,
proceed as follows: The wire which is coloured
blue must be connected to the terminal which
is marked with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
2013-08-19
5:35:18
Table of Contents
5
Table of Contents
1
Getting Started
2
Safety Information
6
Main Features
6Accessories
6Introduction
7
Remote Control
8
Front Panel
8
Rear Panel
9
Connecting the AC Adapter
9
About Ferrite Core (Optional)
1
3Troubleshooting
17Troubleshooting
4Appendix
2
18 Trademarks and Licenses
18 Handling the Unit
19Specifications
3
2Operating
10
10
10
10
12
12
12
12
13
13
14
Basic Operations
– Switch to Standby mode
– Switch to Power Off
– Android Device Operation
– Turning Off the Sound Temporarily
– Auto Power Down
– Setting BASS (BASS BLAST) sound
effect
– Listening to Music from Your Portable
Device
Using a Bluetooth Wireless Technology
– Listening to Music of a Bluetooth
Device
Using Bluetooth App
ND2531-BE.BGBRLLK_ENG_7409.indd 5
4
2013-08-19
5:35:18
6
Getting Started
Main Features
1
Made for Android device
Accessories
Please check and identify the supplied accessories.
Getting Started
Enjoys music from your Android device with simple
connection.
Portable In
Listens to music from your portable device.
Remote control (1)
Battery (1)
Power cord(1)
AC adapter(1)
Bluetooth®
Listens to music stored on your Bluetooth device.
BASS (BASS BLAST)
Reinforce BASS (BASS BLAST) sound effect..
LG Bluetooth Remote
You can control this unit with your Android device
via Bluetooth. This unit and your Android device
must be connected to Bluetooth app. Visit “Google
Android Market (Google Play Store)” and use this
QR code to search for “LG Bluetooth Remote” app.
For detailed information, refer to the 15 page.
Introduction
Symbol Used in This Manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
(Android OS)
ND2531-BE.BGBRLLK_ENG_7409.indd 6
2013-08-19
5:35:19
Getting Started
Remote Control
7
Battery Installation
You have two ways to open the battery cover.
1. Turn the battery cover counterclockwise by
using a coin or your finger. Then take the battery
cover.
1
Getting Started
Coin
Finger
1 (Power): Switches the unit ON or OFF.
PFUNCTION : Selects the function and input
source.
+/- (Volume) : Adjusts volume of speaker.
2. Insert and fix the battery with the plus (+)
facing in the same direction as the plus (+) on
the battery cover.
BASS EQ : Reinforce BASS (BASS BLAST) sound
effect.
Y/U(Skip) : Skips fast Backward or Forward.
(Play/Pause) : Starts or pause playback
@(Mute) : Mutes the sound.
? : The button is not available for any function.
>>Caution
The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of fire or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in fire.
3. Put the battery cover on the remote control and
turn it clockwise to close.
Coin
Finger
>>Caution
If you have long nails, do not open the battery
cover by using your finger. Or else, your nail
would be broken.
ND2531-BE.BGBRLLK_ENG_7409.indd 7
2013-08-19
5:35:20
8
Getting Started
Front Panel
1
Getting Started
a Android device Dock
Connects your Android device.
b Support for Android device
cSpeaker
dDisplay Window
Displays each of functions.
e1/F (Power/Function)
- Power on : Press 1/F to turn the unit on.
- Power off : Press and hold 1/F for about 3
seconds to turn the unit off.
- Selects the function and input source.
+/- (Volume)
Adjusts volume of speaker.
Rear Panel
BASS
a
Reinforce BASS (BASS BLAST) sound effect.
(USB) (Charging Only)
b
Charges your portable device.
ND2531-BE.BGBRLLK_ENG_7409.indd 8
PORT.IN
Listens to music from your portable device.
d DC IN (AC adapter input)
Connects the supplied AC adapter.
c
2013-08-19
5:35:21
Getting Started
>>Caution
Precautions in using the touch buttons
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
yy Do not press the touch buttons hard to
make it work. - If you apply too much
strength, it can damage the sensor of the
touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
About Ferrite Core
(Optional)
1
Getting Started
yy Use the touch buttons with clean and dry
hands. - In a humid environment, wipe out
any moisture on the touch buttons before
using.
9
This ferrite core can reduce noises.
How to attach the ferrite core
1. Pull the stopper [a] of the ferrite core to open.
Connecting the AC
Adapter
2. Wind the portable cable and USB cable on the
ferrite core.
3. Close the ferrite core until it clicks.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
ND2531-BE.BGBRLLK_ENG_7409.indd 9
2013-08-19
5:35:21
2Operating
10
Operating
Basic Operations
1. Check the orientation of the micro USB
connector on your Android device.
Switch to Standby mode
2
Press 1 or press and hold 1/F. The LED
indicators light up and the last function you
selected blinks.Then the unit switches to standby
mode.
Operating
Switch to Power Off
Press 1 or press and hold 1/F. The LED
indicators light off and the unit switches to power
off.
Android Device Operation
2. You can rotate Android device Dock.
If you want to rotate the dock, pull the dock
upwards and then rotate it to the right or left .
b
You can enjoy the sound from your LG Android
device through the dock for Android device of this
unit. For details about Android device, refer to the
Android device User Guide.
a
To stream audio from your Android device through
this unit, you need :
yy With Android operation system : Ver 4.1(or later)
yy With a micro USB connector
With Android operation system (Version 4.0 or
below), this unit can only charge it and you can
enjoy audio through Bluetooth.
3.Install Support for Android device.
,,Note
yy This unit may not compatible with the
device that does not support the *AOA
(Android Open Accessory) 2.0 version.
It is possible that certain devices may not
support or be compliant with the AOA2.0
USB audio standard, resulting in the device
freezing or rebooting after directly docked
and detached from the speaker system.
If you experience this problem, please
contact your device manufacturer. Your
device may need to be updated with the
latest Jellybean software and or the correct
AOA2.0 USB audio standard.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to the
Accessory and HID (Human Interface Device)
yy You are recommended to remove the case
for your Android device(Ver 4.1or later)
before you dock your Android device.
ND2531-BE.BGBRLLK_ENG_7409.indd 10
2013-08-19
5:35:22
Operating
11
,,Note
4. Dock the Android device firmly.
yy If the phone connection has an error, check
these problems as follows;
yy In case of no sound from this unit, adjust
the volume of your Android device.
2
Operating
-- Your Android device is not connected firmly.
-- This unit recognizes your Android device as
an unknown device.
-- Your Android device is not booted.
-- Check the setting of USB connection type
on your Android device.
yy When you disconnect your Android device
from the dock during playback, the playback
may continue.
yy When you connect Bluetooth during
playback of your Android device, the audio
output is temporarily muted.
yy The charging time may vary depending on
your Android device.
5.Press PFUNCTION or 1/F to select
(Phone)function.
To
Play
Pause
Skip
yy Some Android devices may not be charged.
Do this
Press
.
During playback, Press
.
During playback, press Y/
U to go to the next file or to
return to the beginning of the
current file.
During playback, press Y
twice briefly to step back to the
previous file.
ND2531-BE.BGBRLLK_ENG_7409.indd 11
yy Depending on the position and orientation
of the micro USB connector on your
Android device, connect it in portrait or
landscape position. You can rotate the micro
USB connector
yy If your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
2013-08-19
5:35:22
12
Operating
Turning Off the Sound
Temporarily
Listening to Music from Your
Portable Device
Press @to mute the sound. You can mute
the sound in order, for example, to answer the
telephone. To cancel mute function, press @
again or adjust volume level by pressing +/(Volume).
The unit can be used to play the music from many
types of portable device. (Portable cable is not
supplied as an accessory with this unit.)
2
Auto Power Down
Operating
This unit will power itself down to save electronic
consumption in case main unit is not connected to
external device and is not used for 25 minutes. Also
this unit will power down if no input is connected
using the analogue input after six hours.
Setting BASS (BASS BLAST)
sound effect
You can listen to music by setting BASS (BASS
BLAST) sound effect. Press BASS EQ or BASS
repeatedly.Then you can reinforce BASS (BASS
BLAST) sound effect.
LED (
) ON : BASS (BASS BLAST)
LED (
) OFF : BYPASS
PORT.
1. Connect the portable device to the
IN connector of the unit.
2. Turn the power on by using 1or 1/F.
3. Select the
(PORTABLE) function by pressing
PFUNCTION or 1/F.
4. Turn the portable device on and start playing
music.
ND2531-BE.BGBRLLK_ENG_7409.indd 12
2013-08-19
5:35:23
Operating
Using a Bluetooth
Wireless Technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to Music of a
Bluetooth Device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG Docking
(F7:08)” on your Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
,,Note
Depending on the Bluetooth device type, some
devices do not require a PIN code.
4. When this unit successfully is connected with
your Bluetooth device, “Bluetooth” LED stop
blinking.
2
Operating
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
13
,,Note
yy Depending on the Bluetooth device type,
some device have a different pairing way.
yy Try pairing procedure if your device name is
not in the device list.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.
,,Note
yy Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yy When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
1. Select the Bluetooth function by using the
“
PFUNCTION or 1/F. Bluetooth LED “
blinks in the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG Docking
(XX:XX)”.
ND2531-BE.BGBRLLK_ENG_7409.indd 13
2013-08-19
5:35:23
14
Operating
,,Note
yy After your device is connected to the unit
via Bluetooth, the function switches to BT
automatically.
yy After searching for this unit on your
Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.
2
About LG Bluetooth Remote App
LG Bluetooth Remote app bring a suite of new
features to your unit. To enjoy more features, you
are recommended to download and install free “
LG Bluetooth Remote”. BT app will be available in the
software version Ver 2.3.3 (or late).
Operating
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
Install “ LG Bluetooth Remote App”
through “Google Android Market”
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy When not connected the Bluetooth, “
LED blinks in the display window.
Using Bluetooth App
”
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
1. Tap the Google Android Market (Google Play
Store) icon .
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your powered Bluetooth
device is connected to the Internet.
yy Make sure that your powered Bluetooth
device is equipped with “ Google Android Market(Google Play Store)”.
yy If you want to get more information, refer to
explanation of BT app in “Google Android
Market (Google Play Store)”.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will be
disconnected when the space between
the Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10m.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
ND2531-BE.BGBRLLK_ENG_7409.indd 14
2013-08-19
5:35:23
Operating
Install “ LG Bluetooth Remote App”
by using QR code
Activate Bluetooth with LG
Bluetooth Remote App
1. Install “ LG Bluetooth Remote app” by using QR
code. Use the scanning software to scan the QR
code.
LG Bluetooth Remote app helps to connect your
powered Bluetooth device to the unit.
2. Tap an icon for installation.
3. Tap an icon for downloading.
15
1.Tap LG Bluetooth Remote app icon on your
device’s screen to open LG Bluetooth Remote
app application, and go to the main menu.
2. Tap [Setting] and select the unit you want.
2
Operating
3. If you want to get more information to operate,
tap [Setting] and [Help].
(Android OS)
,,Note
yy Make sure that your powered Bluetooth
device is connected to the Internet.
yy Make sure that your powered Bluetooth
device has a scanning software application.
If you don’t have one, download one from
“Google Android Market (Google Play Store)”.
ND2531-BE.BGBRLLK_ENG_7409.indd 15
2013-08-19
5:35:23
16
Operating
,,Note
yy BT app will be available in the software
version as follow;
Android O/S : Ver 2.3.3(or late)
yy If you place your Android device onto the
dock of this unit while your Android device
is connected to this unit by Bluetooth
connection, the Bluetooth connection is
deactivated.
2
Operating
yy While using Bluetooth, you may not activate
BT app. Disconnect Bluetooth device you have
connected before to use BT app properly.
yy If you use Bluetooth app for operation,
there would be some differences between
Bluetooth app and the supplied remote
control. Use the supplied remote control as
necessary.
yy If you operate BT app with Bluetooth device
connected, the Bluetooth connection you
have connected before may be disconnected.
(Depending on the smartphone’s O/S, this
process has a difference.)
yy Depending on the Bluetooth device, BT.app
may not work.
yy When using BT app for remote control, the
operation may differ from the supplied
remote control.
yy Depending on the type of operating system,
you have some differences for BT app’s
operation.
yy When your Bluetooth device have been
already connected with other unit, disconnect
the Bluetooth connection first. Then you can
control your player through BT app.
yy The connection you’ve made may be
disconnected if you select other application or
change the setting of the connected device
via BT app. In such case, please check the
connection status.
yy Don’t connect your Android device by using
a cable to USB port. Or else the Bluetooth
connection will be disconnected.
yy After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
ND2531-BE.BGBRLLK_ENG_7409.indd 16
2013-08-19
5:35:23
3Troubleshooting
Troubleshooting
17
Troubleshooting
Problem
No Power.
Correction
yy Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Press PFUNCTION or 1/F and then check the selected function.
No sound.
yy Check whether operating system of your device is ver 4.1(or later).
yy Check whether your device is supported by AOA 2.0.
yy Adjust volume of your portable device.
yy Operate the remote control within about 23 ft (7 m).
yy Remove the obstacle in the path of the remote control and the unit.
yy Replace the battery with new one.
Android device does not work. Connect your Android device to the unit correctly.
yy Switch Bluetooth off and on again on your Bluetooth device, then try
pairing again.
3
Troubleshooting
The remote control does not
work properly.
yy Be sure your Bluetooth device is on.
yy Remove the obstacle in the path of the Bluetooth device and the unit.
yy Depending on the type of the Bluetooth device or surrounding
environment, your device may not be paired with the unit.
Bluetooth pairing does not
work well.
yy When your Bluetooth device have been already connected with other
unit, disconnect the Bluetooth connection first. Then you can control
your unit through BT app.
yy Depending on the Bluetooth device, BT app may work restrictively not
work.
yy The connection you’ve made may be disconnected if you select other
application or change the setting of the connected device via BT app.
In such case, please check the connection status.
ND2531-BE.BGBRLLK_ENG_7409.indd 17
2013-08-19
5:35:23
4Appendix
18
Appendix
Trademarks and
Licenses
Handling the Unit
When Shipping the Unit
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
4
Other trademarks and trade names are those of
their respective owners.
Appendix
ND2531-BE.BGBRLLK_ENG_7409.indd 18
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the Exterior Surfaces Clean
Do not use volatile liquids such as insecticide spray
near the unit.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the Unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
2013-08-19
5:35:23
Appendix
19
Specifications
General
AC adapter requirements
DC 12 V 0 1.5 A, 100 -240 V, 50/ 60 Hz
Power consumption
18 W
Dimensions (W x H x D)
275 X 90 X 170 mm
Net Weight (Approx.)
1.3 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs
PORT. IN
500 mV (3.5 mm stereo jack)
USB
USB Version
USB 1.1
Bus Power Supply
USB : DC 5 V 0 1 A, Android device : DC 5 V 0 1.5 A
4
Appendix
Amplifier
Output Power
5 W + 5 W (8 Ω at 1 kHz)
T.H.D
10 %
Speakers
Type
built-in
Impedance Rated
8Ω
Rated Input Power
5W
Max. Input Power
10 W
yy Design and specifications are subject to change without notice.
ND2531-BE.BGBRLLK_ENG_7409.indd 19
2013-08-19
5:35:24
Technology with the human touch
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from
the original date of purchase. These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made
to the apparatus, or if non standard components are used or if the serial number of the apparatus is
removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a receipted
account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become
exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This
will enable LG to assist you in the future should you lose your receipt, your units be stolen, or should
modifications be necessary.
• To obtain information or assistance: C
all 0870 873 5454 Monday-Friday 9.00am-4.30pm
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
ND2531-BE.BGBRLLK_ENG_7409.indd 20
2013-08-19
5:35:24
Download PDF