LG | NP6630 | LG NP6630 Owner’s Manual

ENGLISH
OWNER’S MANUAL
WIRELESS SPEAKER
Please read this manual carefully before operating
your set and retain it for future reference.
FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO
INNER PAGE OF BACK COVER.
NP6630
www.lg.com
NP6630-A0.BGBRLLK_MFL67789408.indd 1
2013-05-27
12:25:41
1
2
Getting Started
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
NOTICE: For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom of the
apparatus.
NP6630-A0.BGBRLLK_MFL67789408.indd 2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
2013-05-27
12:25:42
Getting Started
CAUTION:
yy The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
yy Internal lithium battery in the unit should not be
replaced by user because of danger of explosion
if battery is incorrectly replaced, and must be
replaced with the same type battery by expert.
yy Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.
yy To avoid fire or electric shock, do not open the
unit. contact to qualified personnel only.
yy Do not leave the unit in a place near the heating
appliances or subject to direct sunlight, moisture,
or mechanical shock.
Disposal of your old appliance
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
1
Getting Started
yy No naked flame sources, such as lighted candles,
should be placed on the apparatus.
3
yy To clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the
surface of the unit.
yy Do not use volatile liquids such as insecticide
spray near the unit. Wiping with strong pressure
may damage the surface. Do not leave rubber
or plastic products in contact with the unit for a
long period of time.
yy Do not place the unit over the vehicle’s air bag.
When the air bag deploys, it may result in injury.
Before using in the car, fix the unit.
yy Do not use the handsfree function during driving
a car.
yy Do not leave the unit on an unstable place such
as high shelves. It may fall down because of the
vibration of the sound.
NP6630-A0.BGBRLLK_MFL67789408.indd 3
2013-05-27
12:25:42
4
Getting Started
Disposal of waste batteries/accumulators
1
Getting Started
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
NP6630-A0.BGBRLLK_MFL67789408.indd 4
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the following address for obtaining
a copy of the DoC (Declaration of Conformity).
Contact office for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yy Please note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
POWER: This unit operates on a mains supply
of 100-240 V~, 50/60 Hz.
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS
1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover
contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your
home, then the plug should be removed and
a suitable type fitted. Please refer to the wiring
instructions below:
Warning: A mains plug removed from the mains
lead of this unit must be destroyed. A mains
plug with bared wires is hazardous if inserted in
a mains socket. Do not connect either wire to
the earth pin, marked with the letter E or with
the earth symbol 6 or coloured green or green
and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this unit
may not correspond with the coloured marking
identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must
be connected to the terminal which is marked
with the letter N or coloured black. The wire
which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
2013-05-27
12:25:42
Table of Contents
5
Table of Contents
1
Getting Started
2
Safety Information
6
Main Features
6
– LG Bluetooth Remote
6Accessories
6Introduction
7
Main Unit
8
Charging the Unit
8
– Connecting the AC adapter
8
– Checking the charging status
8
– Battery protection
2Operating
1
3Troubleshooting
21Troubleshooting
21 – General
2
4Appendix
22About 1/! Button’s Condition
23 Trademarks and Licenses
23 Handling the Unit
24Specifications
3
5Warranty
4
25Warranty
9
9
9
9
Basic Operations
– Using power button
– Using volume button
Listening to Music from Your External
Device
10 – About ferrite core (Optional)
10 Using a Bluetooth Wireless Technology
10 – Listening to music of a bluetooth
device
12 – Using bluetooth app
14 Using AirPlay
15 – Connecting AirPlay-enabled device
17 – Streaming audio from your iTunes
music library to this unit
19 Other Operations
19 – Using handsfree function
19 – Auto power down
19 – LG Tag On
20 – LG Sound Sync
NP6630-A0.BGBRLLK_MFL67789408.indd 5
5
2013-05-27
12:25:43
6
Getting Started
Main Features
1
Accessories
Getting Started
Made for iPod/iPhone/iPad or
Android device
Please check and identify the supplied accessories.
Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.
Portable In
AC adapter (1)
Power cord (1)
Listens to music from your portable device.
LG Sound Sync
Control the volume level with the remote control of
your LG TV that is compatible with Sound Sync.
AirPlay®
Listen to music stored on your Apple device.
LG Bluetooth Remote
You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit “Apple App Store” or “Google Android Market
(Google Play Store)” or use the QR code shown
below to search for “LG Bluetooth Remote” app. For
detailed information, refer to page 12.
(Apple iOS)
NP6630-A0.BGBRLLK_MFL67789408.indd 6
Portable Cable (1)
Introduction
Symbol used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
(Android OS)
2013-05-27
12:25:44
Getting Started
7
Main Unit
1
Getting Started
a1/!
- Turns on / off : Press and hold 1/!
- Selects the function and input source.
b+/- (Volume) : Adjusts speaker volume.
cPhone button
dSpeaker
eMicrophone
fWi-Fi SETTING: Connects your unit to the
existing Wi-Fi network.
g SOUND SYNC
Synchronizes this unit and your LG TV.
h AIR DIRECT / RESET
- Creates new Wi-Fi network with your unit.
- Initializes Wi-Fi network’s security mode.
>>Caution
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
yy Do not apply excessive pressure to the
touch buttons. Excessive force can damage
the sensor of the touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
iReset hole
jDC IN (AC adapter input)
kPORT.IN (3.5 mm)
Listen to music from your portable device.
lNFC Tag (page 19)
NP6630-A0.BGBRLLK_MFL67789408.indd 7
2013-05-27
12:25:45
8
Getting Started
Charging the Unit
1
Connecting the AC adapter
Getting Started
This device uses a built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Checking the charging status
When AC Adapter is connected, battery charging
is started. You can check the charging status with
1/! button. (Refer to the page 22 for details)
yy Charging : The 1/! button blinks red or white.
yy Fully charged : The 1/! button turns red or
white.
,,Note
yy Deactivate AirPlay feature
Operating time is approx. 10 hours. (Based
on 30 % volume, 1 kHz signal, 500 mV
portable input and fully charged status)
yy Activate AirPlay feature
Operating time is approx. 5 hours. (Based on
30 % volume, 1 kHz signal, 500 mV portable
input and fully charged status)
AC power cord
It may vary depending on the battery status
and operational conditions.
Battery protection
AC Adapter
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
When AC Adapter is connected, if the unit is in high
or low temperature, the battery may not function
properly. Please reference the table below to fully
understand the battery protection feature.
In this case, use the unit in proper place where the
temperature or humidity is not so high or low.
Battery temperature : Very low
Power
Off
(Red) (White)
Warning
Battery temperature : Very High
Power
On
NP6630-A0.BGBRLLK_MFL67789408.indd 8
(Red) (White) (Off )
Blinks
10 sec
2013-05-27
12:25:46
Operating
Basic Operations
9
Using volume button
Using power button
,,Note
Power On
Activate AirPlay feature
Press and hold the 1/! button.
Deactivate AirPlay feature
Press and hold down the AIR DIRECT / RESET
button first, followed by the 1/! button.
,,Note
When Airplay feature is set to off, power
consumption will be lower than when Airplay
is set to on.
While adjusting volume if you try to increase
the volume when it is already at maximum
level, a beep is played on the unit.
2
Operating
You can adjust speaker volume. When you touch
the volume button, the 1/! button blinks twice in
white color.
Listening to Music
from Your External
Device
The unit can be used to listen to the music from
many types of external device.
Power Off
Press and hold the 1/! button.
Changing the mode
When turing on the unit, you can change the
mode. Press 1/! button repeatedly, the mode will
change with the sound.
Activate AirPlay feature
(Portable In -> AirPlay -> bluetooth -> Portable In)
Deactivate AirPlay feature
(Portable In -> bluetooth -> Portable In)
,,Note
You can enjoy the Sound Sync feature by
pressing SOUND SYNC button. Refer to page
20
MP3 or PMP etc
1. Connect the external device to the PORT.IN
connector of the unit.
2. Turn the power on by pressing 1/! button.
3.Press 1/! button repeatedly to select portable
in mode.
4. Turn the external device on and start playing.
NP6630-A0.BGBRLLK_MFL67789408.indd 9
2013-05-27
12:25:47
10
Operating
About ferrite core (Optional)
This ferrite core can reduce noises.
How to attach the ferrite core
Using a Bluetooth
Wireless Technology
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the portable cable on the ferrite core.
3. Close the ferrite core until it clicks.
2
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
Operating
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music of a
bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by pressing the
1/! button repeatedly.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG Portable
(XX:XX)”.
NP6630-A0.BGBRLLK_MFL67789408.indd 10
2013-05-27
12:25:48
Operating
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG Portable
(F7:08)” on your Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
,,Note
4. When this unit successfully is connected with
your Bluetooth device, the 1/! button blinks
twice in white color.
,,Note
yy Depending on the Bluetooth device type,
some devices have a different pairing way.
yy Try pairing procedure if your device name is
not in the device list.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.
,,Note
yy Sound from the unit can be distorted if you
raise the volume of Bluetooth device up to
two-thirds or more.
yy When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
,,Note
yy On portable in mode, After your device
is connected to the unit via Bluetooth,
the function switches to Bluetooth mode
automatically.
yy After searching for this unit on your
Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
2
Operating
Depending on the Bluetooth device type,
some devices do not require a PIN code.
11
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy As the distance between your bluetooth
device and speaker unit gets closer to
10m, the sound quality will wortsen. The
connection will disconnect when the
distance between the Bluetooth and the
unit gets out of the operating range.
yy The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
NP6630-A0.BGBRLLK_MFL67789408.indd 11
2013-05-27
12:25:48
12
Operating
Using bluetooth app
Install “LG Bluetooth Remote” app
by using QR code
About “LG Bluetooth Remote” app
1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.
“LG Bluetooth Remote” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.
2
Operating
Install “LG Bluetooth Remote”
app through “Apple App Store” or
“Google Android Market (Google
Play Store)”
1. Tap the “Apple App Store” icon or “Google
Android Market (Google Play Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Apple App Store” or “Google
Android Market (Google Play Store)”.
yy If you want to get more information, refer to
explanation of BT app in “Apple App Store”
or “Google Android Market (Google Play
Store)”
NP6630-A0.BGBRLLK_MFL67789408.indd 12
(Apple iOS)
(Android OS)
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Apple App
Store” or “Google Android Market (Google
Play Store)”.
2013-05-27
12:25:49
Operating
Activate bluetooth with “LG
Bluetooth Remote” app
“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.
,,Note
In case of iOS device ;
After performing the pairing operation,
activate Bluetooth with LG Bluetooth Remote
App.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
,,Note
yy BT app will be available in the software
version as follow;
Android O/S : Ver 2.3.3 (or later)
iOS O/S : Ver 4.3 (or later)
yy This unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.
yy Depending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yy “LG Bluetooth Remote” app for Apple iOS is
slightly different from that of Android OS.
yy The connection you’ve made may be
disconnected if you select other application
or change the setting of the connected
device via “LG Bluetooth Remote” app. In
such a case, please check the connection
status.
2
Operating
1.Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.
13
yy To prevent a malfunction, you are
recommended to connect only one device
to this unit.
yy After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
NP6630-A0.BGBRLLK_MFL67789408.indd 13
2013-05-27
12:25:49
14
Operating
Using AirPlay
Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod
touch, or iPad on any AirPlay-enabled device connected to the Wi-Fi network.
To stream audio wirelessly by AirPlay, you need :
Air Direct
2
Operating
Compatible Apple
Device
Webpage
iPad mini, iPad4, iPad3, iPad2, iPad, iPhone5, iPhone 4S, iPhone 4,
iPhone 3GS, iPod touch 5G, iPod touch 4G, iPod touch 3G
iOS Version
Ver.4.3.3 (or later)
iTune Version
Ver.10.2.2 (or later)
Wireless LAN
(internal antenna)
802.11 b/g
WPA(TKIP/AES)
Security Mode
WEP with
Open / Shared mode
Webpage address
192.168.1.1
(Optional for security)
yy This unit should be connected to the same local
network as your iTunes host device through the
Wi-Fi router.
yy Depending on the operating system or the
application’s version and the setting status of
AirPlay-enabled device connected to this unit,
AirPlay may not be operated normally.
yy Depending on the Network environment and
your device state, it may take long time to
connect the unit.
WPA2(TKIP/AES)
WEP with
Open mode
192.168.1.111
Compatible iPod/iPhone/iPad models
iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd
and 4th generation), iPad 2, iPad, iPad mini, iPod
touch (3rd through 5th generation),
AirPlay, iPad, iPhone, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and
other countries. Lightning is a trademark of Apple
Inc.
yy To prevent a malfunction, you are recommended
to connect only one device to this unit.
NP6630-A0.BGBRLLK_MFL67789408.indd 14
2013-05-27
12:25:49
Operating
Connecting AirPlay-enabled
device
Option 1 : Using Air Direct
Using Air Direct with Security mode
6. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your iPod touch/
iPhone/iPad or PC/MAC.
7. Type in “192.168.1.1” at the browser address bar
and confirm.
8. Set security mode and insert password.
- hexadecimal (0-9, A-F) 10 or 26 digits.
- 5 or 13 ASCII characters.
9. Tap or click “OK”
2
Operating
On Unit
1.Press 1/! button repeatedly on the unit to
select AirPlay function.
2. Press AIR DIRECT / RESET on the unit. Then
1/! button blinks with white and amber color
alternately. Then it stops blinking and stays in
amber color with beep sound. (about 1/!
button, refer to page 22)
On AirPlay-enabled device
3. Turn on the Wi-Fi function on AirPlay-enabled
device.
15
10.In the network list, find and select “LG AIR
DIRECT XXXXXX” again.
4. In the network list, find and select “LG AIR
DIRECT XXXXXX”.
5. Use AirPlay after your iPod touch/iPhone/iPad
or PC/MAC is connected.
,,Note
11.If you want to get back to non-security mode,
select security type as None.
,,Note
yy If you want to deactivate Air Direct function,
press AIR DIRECT / RESET.
yy If “LG AIR DIRECT XXXXXX” is not in the list,
try to scan the available Wi-Fi networks
again.
yy If you want to initialize Wi-Fi network’s Security
Mode, press and hold AIR DIRECT / RESET.
yy When your iPod touch/iPhone/iPad or
PC/MAC is connected to “LG AIR DIRECT
XXXXXX” , you cannot use internet.
yy When you disconnect Air Direct, this unit will
automatically attempt to reconnect webpage
it has last accessed.
NP6630-A0.BGBRLLK_MFL67789408.indd 15
2013-05-27
12:25:52
16
Operating
Option 2 : Using webpage
The new Wi-Fi network created by this unit only
allows access of one Wi-Fi enabled device. To avoid
interference from any other Wi-Fi devices, you are
recommended to temporarily disable the Wi-Fi
function on your other Wi-Fi devices.
2
Operating
,,Note
yy “LG AUDIO Setup XXXXXX” is the temporary
and assistant Wi-Fi network for connection
of this unit to your home Wi-Fi router.
yy While your iPod touch/iPhone/iPad or your
Wi-Fi enabled PC/Mac is connecting to “LG
AUDIO Setup XXXXXX” network, you can not
use Internet.
4. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your iPod touch/
iPhone/iPad or PC/MAC.
5. Type in “192.168.1.111” at the browser address
bar and confirm.
6. Select your network name (SSID) from “Wireless
Network”.
7. Enter the network key if required.
8. Tap or click “OK” to proceed with network
settings change.
-- Follow the on-screen instructions to change and
confirm the internal Wi-Fi settings of this unit.
-- Please wait about 30 seconds and more.
On Unit
1.Press 1/! button repeatedly on the unit to
select AirPlay function.
2.Press Wi-Fi SETTING. 1/! button will blink
with white and amber color alternately.
On AirPlay-enabled device
3. After 20 seconds, select “LG AUDIO Setup
XXXXXX” in the network list on your iPod/
iPhone/iPad or PC/MAC. 1/! button will blink
quickly with white and amber color alternately.
,,Note
yy If “LG AUDIO Setup XXXXXX” is not in the
list, try to scan the available Wi-Fi networks
again.
yy If you want to deactivate Webpage function,
press Wi-Fi SETTING.
yy In case of pressing Wi-Fi SETTING on other
function, the unit goes to AirPlay function.
You check the status through 1/! button.
9. If this unit is connected to your selected home
Wi-Fi network successfully, 1/! button stops
blinking and stays in white color. (about 1/!
button, refer to page 22)
10.If you have security on your access point, you
need to input the security code as necessary.
yy When this network connection is unstable,
initialize the network by pressing AIR DIRECT
/ RESET.
NP6630-A0.BGBRLLK_MFL67789408.indd 16
2013-05-27
12:25:53
Operating
,,Note
yy If you use other characters than the English
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
Streaming audio from your
iTunes music library to this
unit
,,Note
Make sure that your iTunes host device is
connected to the same Wi-Fi network as this
unit. Your iTunes device can be an iPod touch/
iPhone/iPad installed with iOS 4.3.3 (or later) or
a Wi-Fi enabled PC/Mac installed with iTunes
10.2.2 (or later).
Stream from your iPod touch/
iPhone/iPad
2
Operating
yy An Access Point is a device that allows you
to connect to your home network wirelessly.
17
1. Launch the “Music” application on your iPod
touch/iPhone/iPad.
2. Tap on the AirPlay icon
NP6630-A0.BGBRLLK_MFL67789408.indd 17
.
2013-05-27
12:25:53
18
Operating
4. Select a media file and start play.
-- After a while, you will hear music from this
unit.
-- Depending on your connection environment
and network condition, audio output may
not be normal.
2
Operating
3. Select “LG AUDIO XXXXXX” (or user customized
name) from the AirPlay list.
,,Note
yy If you fail to hear music after successful
setup, do one of the following on your iPod
touch/iPhone/iPad:
-- D
isconnect and then re-connect to the
same Wi-Fi router again.
-- C
lose all applications running at the
background.
-- P
ower off and then power on your iPod
touch/iPhone/iPad again.
yy To prevent a malfunction, you are
recommended to connect only one device
to this unit.
NP6630-A0.BGBRLLK_MFL67789408.indd 18
2013-05-27
12:25:54
Operating
19
Other Operations
LG Tag On
Using handsfree function
1. Activate the NFC feature of your NFC-enabled
phone.
Preparation: Your smartphone must be paired
with the unit via bluetooth.
1. When a call comes in, press { to receive the
phone.
LG Tag On allows you to install and open “LG
Bluetooth Remote” app to NFC-enabled phone.
2. Turn on the unit.
3. Tag the back of your NFC-enabled phone over
the unit.
yy While listening to music, for incoming calls,
the music pauses automatically. Then the
unit and your smartphone ring at the same
time.
yy Depending on the type of bluetoothenabled phone or surrounding
environment, the sound quality may be
lowered or the unit may not work properly.
2. You can select the desired option by using {
button, refer to below.
Condition
Incoming
Call
During Call
Press {
Press and
Hold {
Answer Call
Reject Call
Hang Up
Switch Call
from unit to
Phone
Auto power down
2
Operating
,,Note
-- If “LG Bluetooth Remote” app is not installed on
your NFC-enabled phone, the linked screen with
“LG Bluetooth Remote“ app is displayed.
-- If “LG Bluetooth Remote” app is installed on your
NFC-enabled phone, “LG Bluetooth Remote”
app is activated and Blutooth is connected
automatically.
,,Note
yy You must activate the NFC feature of your
NFC-enabled phone.
yy If your NFC-enabled phone’s screen is
locked, it will not read the NFC.
yy If your smart phone case is plated with
chrome, NFC is unavailable. Depending on
your case’s material or thickness, NFC may
not be read well.
This unit will power down automatically to save
electronic consumption in the case the speaker
unit is not connected to an external device and is
not used for 25 minutes. Also this unit will power
down if no input is connected using the analog
input after six hours.
NP6630-A0.BGBRLLK_MFL67789408.indd 19
2013-05-27
12:25:55
20 Operating
LG Sound Sync
With wireless connection
1. Turn on the unit.
You can control some functions of this unit by your
LG TV’s remote control with LG Sound Sync. The LG
TV must support LG Sound Sync. Make sure of the
LG Sound Sync logo on your TV.
2
Controllable function by LG TV’s remote control :
Volume up/down, mute
Operating
Refer to the TV’s instruction manual for the details
of LG Sound Sync.
,,Note
yy When the connections failed, make sure of
the condition of the TV and power of it.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turned off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
2.Press SOUND SYNC to select the LG Sound
Sync function. 1/! button will stay in Green
color.
3. Set up LG Sound Sync (Wireless) on the TV. Refer
to the TV’s instruction manual.
4. When this unit successfully is connected with
your LG TV, the 1/! button blinks twice in
Green color.
If your unit and LG TV are connected normally,
1/! button will blink or stop blinking depending
on battery condition. (Refer to “Battery” on page 22)
,,Note
yy Once the LG TV function is selected, the
unit connects automatically to the TV when
restarting.
yy The device with Bluetooth wireless
technology will be disconnected, if Sound
Sync function is selected. Bluetooth remote
app will also disconnect.
yy In LG Sound Sync function, you can search
and connect this unit through LG TV only.
yy In LG Sound Sync function, the volume step
of this unit will be changed to the volume
step of LG TV.
NP6630-A0.BGBRLLK_MFL67789408.indd 20
2013-05-27
12:25:55
3Troubleshooting
Troubleshooting
21
Troubleshooting
General
Problem
No Power.
Cause & Correction
yy The battery is discharged. Recharge the battery.
yy Connect the unit to the power supply with the AC adapter
yy The unit or your smart device’s volume is set to minimum. Check and adjust
the volume of the unit or bluetooth device’s volume.
No sound or sound
distortion
yy When you use an external device at high volume, the sound quality may be
deteriorated. Lower the volume of the devices.
yy Switch bluetooth off and on again on your bluetooth device, then try pairing
again.
yy Be sure your bluetooth device is on.
yy Remove the obstacle in the path of the bluetooth device and the unit.
yy Depending on the type of the bluetooth device or surrounding
environment, your device may not be paired with the unit.
Bluetooth pairing does
not work well.
3
Troubleshooting
yy If you use the unit for purposes other than listening to music, the sound
quality may be lowered or the unit may not work properly.
yy While using Bluetooth, you may not activate BT app. Disconnect Bluetooth
device you have connected before to use BT app properly.
yy When your Bluetooth device have been already connected with other unit,
disconnect the Bluetooth connection first. Then you can control your unit
through BT app.
yy Depending on the Bluetooth device, BT app may work restrictively not work.
yy The connection you’ve made may be disconnected if you select other
application or change the setting of the connected device via BT app. In
such case, please check the connection status.
Connecting AirPlay does yy Press and hold AIR DIRECT / RESET on the unit to initialize.
not work well.
The unit does not
operate normally.
yy In case of malfunction, 1/! button is lit in red and white alternately. Please
use the unit in proper place where the temperature or humidity is not so
high or low.
Above solutions do not
work.
yy Press Reset hole with a pointed thing like mechanical pencil.
NP6630-A0.BGBRLLK_MFL67789408.indd 21
2013-05-27
12:25:55
4Appendix
22 Appendix
About 1/! Button’s Condition
Turned on
white
Turned on
red
Turned on
amber or green
Turned
off
Beep Sound
Battery
Power
AC Adapter
Condition
Off
Connected
On
Disconnected
On
Connected
Charging
-
Connected
Has a problem with the
battery
Power
AC Adapter
Condition
On
-
Bluetooth paired
Power
AC Adapter
Condition
On
-
Waiting for connection
(On AirPlay mode)
On
-
Connecting (Searching
AirPlay-enabled device)
(Amber)
On
-
Connecting (Searched
AirPlay-enabled device)
(Amber)
On
Disconnected
AirPlay connected
On
Connected
AirPlay connected /
Charging Full charge
On
-
AirPlay resetting
Charging
Color
Full charge
Blinks
quickly
Low battery
Full charge
Warning
message
Bluetooth
4
Color
Blinks twice
Appendix
AirPlay
Color
(Amber)
Beep : when disconnecting
Air Direct
Blinks
slowly
Blinks
Quickly
(Amber)
Blinks
quickly
(3 sec)
(Amber)
LG Sound Sync
Power
AC Adapter
Condition
On
-
Sound Sync disconnected
(On Sound Sync mode)
On
-
Sound Sync connected
NP6630-A0.BGBRLLK_MFL67789408.indd 22
Color
(Green)
(Green)
Blinks twice
2013-05-27
12:25:57
Appendix 23
Trademarks and
Licenses
Handling the Unit
When shipping the unit
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
NP6630-A0.BGBRLLK_MFL67789408.indd 23
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
2013-05-27
4
Appendix
Other trademarks and trade names are those of
their respective owners.
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
12:25:58
24 Appendix
Specifications
General
Power requirements
DC 12 V 0 1.5 A
AC adapter requirements
100 - 240 V, 50 / 60 Hz
Power consumption
18 W
Dimensions (W x H x D)
300 mm x 95 mm x 98 mm
Net Weight (Approx.)
1.37 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 60 %
Inputs
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Amplifier
4
Output Power (Adapter)
10 W x 2 ch (6 Ω at 1 kHz)
Appendix
Output Power (Battery)
5 W x 2 ch (6 Ω at 1 kHz)
T.H.D
10 %
Speakers
Type
built-in
Impedance Rated
6Ω
Rated Input Power
10 W
Max Input Power
20 W
yy Design and specifications are subject to change without notice.
NP6630-A0.BGBRLLK_MFL67789408.indd 24
2013-05-27
12:25:58
5Warranty
Warranty 25
Warranty
Technology with the human touch
GUARANTEE
• LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be
reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from
the original date of purchase. These claims must be made in accordance with the published scale of
service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made
to the apparatus, or if non standard components are used or if the serial number of the apparatus is
removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a receipted
account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become
exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
5
Warranty
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This
will enable LG to assist you in the future should you lose your receipt, your units be stolen, or should
modifications be necessary.
• To obtain information or assistance: C
all 0870 873 5454 Monday-Friday 9.00am-4.30pm
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
NP6630-A0.BGBRLLK_MFL67789408.indd 25
2013-05-27
12:25:58
NP6630-A0.BGBRLLK_MFL67789408.indd 26
2013-05-27
12:25:58
Download PDF