LG | SPK8 | LG SPK8 Owner’s Manual

CAUTION
ENGLISH
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
SIMPLE MANUAL
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
Wireless
Rear Speakers
Kit
WARNING: Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from over heating. The openings shall be
never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, should be placed on the apparatus.
NOTICE: For safety marking information including
product identification and supply ratings, please refer to
the main label on the bottom or the other surface of the
product.
MODEL
SPK8-S
MFL70420328
SPK8-S.DGBRLLK_SIM_ENG_MFL70420328.indd 1-4
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery from
the equipment: Remove the old battery or battery pack,
follow the steps in reverse order than the assembly. To
prevent contamination of the environment and bring
on possible threat to human and animal health, the old
battery or the battery put it in the appropriate container
at designated collection points. Do not dispose of batteries
or battery together with other waste. It is recommended
that you use local, free reimbursement systems batteries
and accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
POWER: This unit operates on a mains supply of
200 -240V~, 50-60Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol 6 or coloured green
or green and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying
the terminals in your plug, proceed as follows: The
wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
Disposal of your old appliance
1. This crossed-out wheeled bin symbol indicates that waste
electrical and electronic products (WEEE) should be
disposed of separately from the municipal waste stream.
2. Old electrical products can contain hazardous substances
so correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health. Your old appliance may contain reusable
parts that could be used to repair other products, and
other valuable materials that can be recycled to conserve
limited resources
3. You can take your appliance either to the shop where you
purchased the product, or contact your local government
waste office for details of your nearest authorised WEEE
collection point. For the most up to date information for
your country please see www.lg.com/global/recycling
Disposal of waste batteries/accumulators
Symbols
~
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Declaration of Conformity
Technology with the human touch
GUARANTEE
Hereby, LG Electronics declares that the radio equipment
type RECEIVER is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be
installed and operated with a minimum distance of 20 cm
between the device and the body.
Pb
1. This symbol may be combined with chemical symbols for
mercury (Hg), cadmium (Cd) or lead (Pb) if the battery
contains more than 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
2. All batteries/accumulators should be disposed separately
from the municipal waste stream via designated collection
facilities appointed by the government or the local
authorities.
Frequency range
5730 to 5821 MHz
Output power (Max.)
13 dBm
• L G Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. A
ll faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the
original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG
equipment, for a period of 12 months from the original date of purchase. These claims must be made in accordance with the
published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the apparatus, or if non
standard components are used or if the serial number of the apparatus is removed, defaced, misused, or altered.
C. A
ny claims made under guarantee must be directed to the dealer from whom the equipment was originally purchased. The dealer
may, before carrying out service under guarantee, require a receipted account as evidence of the date of purchase.
D. W
e respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in use.
E. A
erial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
• REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME
GUARANTEE SERVICE IS PROVED.
3. The correct disposal of your old batteries/accumulators
will help to prevent potential negative consequences for
the environment, animal and human health.
• Product Registration Card :
It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG to assist you
in the future should you lose your receipt, your units be stolen, or should modifications be necessary.
4. For more detailed information about disposal of your old
batteries/ accumulators, please contact your city office,
waste disposal service or the shop where you purchased
the product. (http://www.lg.com/global/sustainability/
environment/take-back-recycling/global-networkeurope)
• To obtain information or assistance:
Call UK: 0344 847 5454 IE: 01 686 9454
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
In all cases of difficulty - consult your LG dealer from whom the product was purchased
LGEUK Website : www.lg.com/uk
(Service website : www.lg.com/uk/support)
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
2018-01-30
3:49:24
1
Rear Speakers Connection
Speaker design and connection method may be
different according to models.
2
aConnect the power cord of wireless receiver to
the outlet.
b Turn on the unit: The unit and wireless receiver
will be automatically connected. The receiver's
yellow - green LED turns on.
Wireless Receiver Connection Manually
Transparent
Black stripe
Rear speaker
(Left)
Wireless
Receiver
Rear speaker
(Right)
Black stripe
Transparent
aConnect the speaker cables to rear speakers
correctly.
b Connect the Wireless Receiver and the rear
speakers (Grey: right, Blue: left) with the speaker
cables.
c Turn on the Surrond function to enjoy surround
sound.
SPK8-S.DGBRLLK_SIM_ENG_MFL70420328.indd 5-8
Surround Sound On/Off
Wireless Receiver Connection
When you turn on surround function, you can enjoy
magnificent surround sound for all the input sound
source with rear speakers.
The initial setting for the surround function is
OFF, turn the surround function ON to use it.
If the rear speakers do not make sound, try to
connect manually.
SK5Y
a Press PAIRING button on the rear of the
wireless receiver.
yy The yellow - green LED on the wireless
receiver blinks quickly.
Surround Off: Press and hold REAR p button on the
remote control about 2 seconds.
b Turn on the main unit.
c Pairing is completed.
yy The yellow - green LED on the wireless receiver
turns on.
Surround On: Press and hold REAR o button on the
remote control about 2 seconds.
SK10Y/SK9Y/SK8Y/SK6Y
Additional Information
Specification of Wireless reciever
Power
requirement
Refer to the main label on the
wireless receiver.
Power
consumption
Refer to the main label on the
wireless receiver.
Approx.
60.0 mm x 220.0 mm x
175.0 mm
Design and specifications are subject to change
without notice.
Dimensions
(W x H x D)
About Ferrite Core (Optional)
twice
Surround On: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select ON - SURROUND in
the display window.
Surround Off: Press and hold AUTO VOL button on the
remote control about 2 seconds. and then press AUTO
VOL button repeateadly to select OFF - SURROUND in
the display window.
2018-01-30
3:49:26
Download PDF