LG | XA64 | LG XA64 Owner’s Manual

ENGLISH
OWNER'S MANUAL
MICRO Hi - Fi SYSTEM
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
XA64 (XA64-D0U, XAS64F)
P/NO : MFL63266286
ENG.indd 1
10. 07. 06
3:44
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case
or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from over
heating. The openings be never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an
authorized service center. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized service.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance. To disconnect power
from the mains, pull out the mains cord plug. When installing the product, ensure
that the plug is easily accessible.
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment: Remove
the old battery or battery pack, follow the steps in reverse order than the assembly.
To prevent contamination of the environment and bring on possible threat to human
and animal health, the old battery or the battery put it in the appropriate container
at designated collection points. Do not dispose of batteries or battery together with
other waste. It is recommended that you use local, free reimbursement systems
batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop where
you purchased the product.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere.
The Netherlands (Tel : +31–(0)36–547–8888)
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 3
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused
at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA
approved type. Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and
a suitable type fitted. Please refer to the wiring instructions below:
Contents
Setting up
Main unit
Remote control
4
5
6
Listening to CDs
Listening to music from your portable player
Listening to the radio
Enjoying a pre-programmed sound field
Setting the Clock
Using an USB device
Recording to USB
7
7
8
8
9
9
10
Troubleshooting
Specifications
11
11
WARNING: A mains plug removed from the mains lead of this unit must be
destroyed. A mains plug with bared wires is hazardous if inserted in a mains
socket.
Do not connect either wire to the earth pin, marked with the letter E or with the
earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the
distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the
following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains
lead of this unit may not correspond with the coloured
marking identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is coloured brown must
be connected to the terminal which is marked with the letter L or coloured red.
You have to set the disc format option to [Mastered] in order to make the
discs compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG
players.
(Mastered/ Live File System : Disc format system for Windows Vista)
The making of unauthorized copies of copy-protected
material, including computer programs, files, broadcasts and
sound recordings, may be an infringement of copyrights and
constitute a criminal offense. This equipment should not be
used for such purposes.
Be responsible
Respect copyrights
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and
completely.
3
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 4
Setting up
1 Connection of the front speakers
Connect the speaker cables to the front speaker terminals.
Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
2 Fit the AM loop aerial to its stand (Optional)
Connect the AM loop aerial to the unit.
3 (FM - aerial)
1
3 Stretch the FM aerial
The reception will be at its best when the end of the aerial
is stretched to be in a straight line and horizontal.
1
1
2 (AM - aerial- optional)
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
*speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure).
4
NOTES:
• If TV screen becomes discolored do not place speakers
within 30cm from TV.
• Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 5
Main Unit
1
DISPLAY WINDOW
2
1/]] Power on/off
3
DISC TRAY
4
FUNC.
Change the functions between FM,
AM(OPTIONAL),CD,USB,
PORTABLE etc.
5
1
SET/RDS (Optional)
Confirms the setting
RDS (Optional)
Shows information about radio
stations.
REC.
Recording (Recording to USB)
USB Connector
7
Z OPEN/CLOSE
You can use it when inserting or
removing CDs.
8
VOL.+/ Controls the volume when using any
function.
./>
TUN.-/ TUN.+
Selects the radio station
Search backward or Forward
Skips to the previous/ next track
B[] Playing/Pausing
9
x STOP
2
3
4
7
EQ
Sound quality adjustment
You can choose sound
impressions.
6
6
PORT.IN
8
5
9
The player can be used to play the
music from many types of portable
player.
PHONES
Headphone jack.( 3.5 mm)
A warning that excessive sound
pressure from earphones and
headphones can cause hearing loss.
CLOCK
For setting the clock and checking
the time.
TIMER
With the TIMER function you can turn
CD,USB and TUNER on or off at a
desired time.
OPEN
6
5
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 6
Remote control
POWER
*
EQ
PRESET/
FOLDER
POWER on/ off.
SLEEP
This button is not available.
Sound quality adjustment.
You can choose sound impressions.
Search for a folder of MP3/ WMA files
When a CD containing MP3/ WMA files in
several folders is being played, press
PRESET/ FOLDER selects the folder you
want to play.
Choose a ‘preset number’ for a radio
station.
FUNCTION Changes the functions.
MUTE
Temporarily stop the sound.
Press the button again to return to the
sound.
VOLUME
Controls the volume when using any
function.
RDS/ PTY RDS (Radio Data System)
(optional) Searchs radio stations by radio type.
Fall asleep while listening to your unit.
Press SLEEP one or more times to select
delay time between 10 and 90 minutes.
(Dimmer: Dim the display light)
PROGRAM For storing radio stations
If you have saved radio stations using
/MEMO
PROGRAM/MEMO, you can scroll through
them and select one.
Listens to your tracks in any order
INFO
z REC
See information about your music.
Recording (Recording to USB)
REPEAT Listen to your tracks repeatedly or
/RANDOM randomly. (Only in CD/USB)
. bb / (Only USB/ CD/ Radio Function)
BB > Selects the radio station
TUN.-/ + Search backward or Forward
Skips to the previous/ next track
B/[]
x
Starts or pauses playback
Stops playback or recording
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the battery (size AAA) match those on the remote control.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
6
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 7
Listening to your tracks (files) repeatedly or randomly
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
1.
2.
3.
4.
5.
6.
Open the CD tray
Insert the CD: Label facing up.
Close the CD tray
Select the CD function
Start the CD playing
To stop a CD playing
ON UNIT
ON REMOTE
Z OPEN/CLOSE
FUNCTION
Z OPEN/CLOSE
FUNC.
B[]
x STOP
B/[]
x
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press REPEAT/RANDOM on the remote control repeatedly.
Tracks will be played back repeatedly or randomly.
2 To return to normal playback, press it repeatedly to select [OFF].
About MP3/ WMA
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 to 48 kHz (MP3), 32 to 48 kHz (WMA)
• Bit rate : 32 to 320 kbps (MP3), 40 to 320 kbps (WMA)
• CD-R physical format should be “ISO 9660/ JOLIET”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files.
We recommend that you use “Easy-CD Creator”, which creates an ISO
9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• At most 99 folders and 999 files are supported on the unit.
1 Press B[] on the unit or B/[] on the remote control during playback.
2 Press this button again to resume play.
Searching for a section within a track
Hold ./> on the unit or . bb / BB > on the remote control during
playback and release it at the point you want to listen to.
Listening to music from your portable player
The unit can be used to play the music from many types of portable
player.
Skipping to another track (files)
Press ./> on the unit or . bb / BB > on the remote control.
Creating your own playlist
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROGRAM/MEMO on the remote control in stop status.
3 Press ./> on the unit or . bb / BB > on the remote control to
select a track.
4 Press PROGRAM/MEMO again to save and select a next track.
Repeat the step 3 - 4.
5 Press B/[] to play the programmed music files.
6 To clear your selection, press x STOP (or x ) twice.
ON UNIT
ON REMOTE
1. Connect the portable player to
the PORT. IN connector of the
unit.
-
-
1/]
FUNC.
-
FUNCTION
-
PORT. IN
2. Turn the power on.
3. Select the PORTABLE function.
4. Turn on the portable player and
start it playing.
POWER
7
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 8
See information about your radio stations - OPTIONAL
Listening to the radio
Make sure both for the FM and AM(Optional) aerial to be stretched to the most.
1. Select FM or AM (optional)
2. Select the radio station
3. To ‘save’ a radio station: A preset
number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio
stations can be saved.
6. To select a ‘saved’ station
ON UNIT
ON REMOTE
FUNC.
TUN. -/ +
-
FUNCTION
TUN.- / TUN.+
PROGRAM/MEMO
-
PRESET/FOLDER
PROGRAM/MEMO
-
PRESET/FOLDER
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio station
being listened to. Press RDS on the remote control several times to
view the information.
PTY - Program Type, such as News, Sport, Jazz.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Program Service name, the name of channel.
You can search the radio stations by program type by pressing RDS.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred program type. Press . bb / BB > (./>).
The tuner will search automatically. When a station is found the search will
stop.
Listening to the radio - More you can do
Looking for radio stations automatically
1 Press and hold TUN. - / TUN.+ on the unit or TUN.- / TUN.+ on the remote
control for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROGRAM/MEMO on the remote control for two seconds.
“ERASE ALL” shows.
2 Press PROGRAM/MEMO on the remote control to erase all the saved
stations.
Improving poor FM reception
Press B/[] on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
Enjoying a pre-programmed sound field
This system has a number of pre-set surround sound fields. You can
select a desired sound mode by using EQ.
The displayed items for the Equalizer may be different depending on
sound sources and effects.
ON DISPLAY
AUTO EQ
ROCK
POP
CLASSIC
XDSS
FLAT
Description
Realizes the sound equalizer that is the most similar to
the genre of which is included in the MP3 ID3 tag of song
files.
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock,
pop or classic concert.
Reinforce the treble, bass and surround sound effect.
You can enjoy the sound without equalizer effect.
Displaying file information (ID3 TAG)
You can check the ID3 TAG information of MP3 files only in discs by pressing
INFO repeatedly.
8
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 9
Setting the Clock
Using an USB device
ON UNIT
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press: The clock setting is finished.
1 /]]
CLOCK
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit. For [Creating your own playlist]
and [Random/Repeat play], refer to the CD playback section.
./>
SET
./>
SET
./>
SET
Using your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER Each function, EX) TUNER, CD.... flashes.
3 Press SET when the function you want to be woken by is showing.
4 Choose one of them by pressing SET.
5 “ON TIME” will be displayed. Then you can set the time you want the alarm to
go on. Press ./> to change the hours and minutes and SET to save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press ./> to change the hours and minutes and
press SET to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use ./> to change the volume and SET to save.
The clock icon “
” shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Notes:
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “
” by
pressing CLOCK even when the player is turned off.
Setting the asleep time
1 Press SLEEP repeatedly to select delay time between 10 and 90 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
3 Press SLEEP once while “SLEEP 10” is displayed, to deactivate sleep function.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatedly until dim off.
ON UNIT
1. Connect the USB device to the
USB port of the unit.
2. Select the USB function.
3. Select a file you want to play.
4. Start your media playing.
5. To stop, press
6. Before disconnecting the
portable USB device, change to
any other function.
-
ON REMOTE
-
FUNC.
FUNCTION
./>
. bb / BB >
B[]
B/[]
x STOP
x
FUNC.
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the following
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used
as a storage device.
9
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 10
Recording Music file in disc source to USB
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the
unit.
2. Select a mode in which you want
to record.
Play back a sound source first.
3. Start the recording:
“REC” is displayed.
4. To stop recording, press
ON UNIT
ON REMOTE
-
-
FUNC.
FUNCTION
REC.
z REC
x STOP
x
One track recording If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording If the USB recording on the CD stop status, all tracks/ files would be
recording.
Program list recording USB records after creating your own program if you want to record the track
you want. (Audio CD, MP3, WMA)
Pausing recording
During recording, press z REC to pause recording.
Press z REC to continue recording. (Only Radio, Portable)
Recording to USB - More you can do
When you are recording, look out for the following
To set recording bit rate and speed
• When you stop recording, the file that has been recorded at that time will
be stored.(Audio CD only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“FULL” , “NO REC” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• For a recorded file, the maximum size is about 512MB.
• You may not record more than 999 files.
• It’ll be stored as follows.
1 Press REC. on the player or z REC on the remote control for longer than 3
seconds.
2 Use . / > on the player or . bb/BB > on the remote control to
select the bit rate among 96/128/192/256 Kbps. You can set the quality of
the recoreded file.
3 Press REC. or z REC again to select the recording speed.
4 Use . / > or . bb/BB > to select a desired recording speed.
X 1 SPEED
- You can listen to music while recording it.
X 2 SPEED
- You can just recording the music file.
5 Press REC. or z REC to finish the setting.
NOTES :
On radio or portable mode, you cannot set the recording speed.
10
AUDIO CD
MP3/ WMA
The other sources
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 11
Troubleshooting
Symptom
Specifications
Cause
Correction
General
No power.
No sound.
The power cord is not plugged in.
Plug in the power cord.
Check whether electricity failed.
Check the condition by operating other
electronic devices.
Check whether you select right function. Press FUNCTION and check the
selected function.
CD
The unit does not
start playback.
An unplayable disc is inserted.
Insert a playable disc.
The disc is dirty.
Clean the disc.
Radio
Radio stations can’t The antenna is positioned poorly.
be tuned in properly. The signal strength of the radio station
is too weak.
Attach an external aerial if necessary.
Tune to the station manually.
No stations have been preset or preset Preset some radio stations.
stations have been cleared (when tuning
by scanning preset channels).
Remote control
The remote control
does not work
properly.
The remote control is not pointed at the
remote sensor of the unit.
Point the remote control at the remote
sensor of the unit.
The remote control is too far from the
unit.
Operate the remote control within about
16 ft (5 m).
There is an obstacle in the path of the
remote control and the unit.
Remove the obstacle.
The battery in the remote control is
exhausted.
Replace the battery with new one.
General
Power supply
Power consumption
Net Weight
External dimensions (WxHxD)
Operating temperature
Operating humidity
Refer to the main label.
Refer to the main label.
2.8 kg
(170 x 244 x 275) mm
5 oC to 35 oC
5% to 85 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or
87.50 to 108.00 MHz
AM Tuning Range (optional) 522 to 1620 kHz or
520 to 1710 kHz
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
30 W + 30 W
0.50 %
50 Hz to 20 KHz
70 dB
CD
Frequency response
Signal-to-noise ratio
Dynamic range
100 Hz to 18 KHz
70 dB
55 dB
Speakers (XAS64F)
Type
Impedance
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
2 Way 2 Speaker
6Ω
30 W
60 W
(150 x 244 x 182) mm
1.9 kg
USB
Version
BUS Power supply
1.1
DC 5 V
500 mA
Designs and specifications are subject to change without notice.
11
XA64-D0U-AGBRLL-ENG
7/8/10
10:15 AM
Page 12
Technology with the human touch
GUARANTEE
●
1.
2.
LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase.
The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months
from the original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are made to the apparatus, or if non standard components are
used or if the serial number of the apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally purchased. The dealer may, before carrying out
service under guarantee, require a receipted account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS
PROVED.
●
Product Registration Card :
●
To obtain information or assistance:
It is helpful to complete at least your name, address, phone, model & serial numbers and return it.
This will enable LG to assist you in the future should you lose your receipt, your units be stolen, or should
modifications be necessary.
MODEL NO.*
*
Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
SERIAL NO.*
Please complete for your own record
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
LGEUK Website : www.lge.co.uk
( service website : www.lgelectronics.co.uk )
DATE OF PURCHASE.*
ENG.indd 2
10. 07. 06
3:44
Download PDF