LG | 15LC1RB | LG 15LC1RB Owner’s Manual

LCD TV
OWNER'S MANUAL
MODELS: 15LC1R
*
20LC1R
*
23LC1R
*
Please read Information Manual included together
before reading this manual and operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
and quote
require service.
this information to your dealer when you
P/NO
:
38289U0018B
(0512-REV00)
Printed in Korea
Contents
3
Installation
Please set it up
carefully
so
the
product
doesn't fall
over
5
6
Location and function of controls
Remote control handset
Battery installation / Front/ Rear
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection
10
On
11
screen menus
Menu selection
12
up TV stations
Auto programme tuning
Manual programme tuning
Assigning a station name
Programme edit
Favourite programme
Calling the programme table
Setting
Picture adjustment
PSM (Picture Status
CSM (Colour Status
Picture adjustment
Sound
17
Memory)
Memory)
18
adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/ Dual reception
NICAM reception / Sound output selection
Time Menu
Clock / On/Off time
Auto sleep / Sleep timer
20
Other functions
22
TV, AV and PC modes
Auto AV
switching
/ Child lock / Power indicator
Teletext
Switch on/off
SIMPLE text / TOP text
FASTEXT / Special teletext functions
24
Connection of external
26
equipment
Aerial socket
Euro scart socket (VCR) / S-Video/Audio in sockets
Euro scart socket (DVD)
(S-Video)
DVD input sockets (15/23LC1R * ) / DTV in sockets
Audio/Video in sockets / Headphone socket
(15/23LC1R * )
Connection of PC
PC in socket
PC Setup
Picture format
Troubleshooting
Product
2
28
(15/23LC1R * )
(23LC1R * only)
check list
Specifications
31
32
Installation
Unfolding
ENGLISH
the stand base
1. Place the set with its front
facing
downward
on a
cushion
2. Hold down the release button inside the stand and
or
soft cloth.
strongly pull
out the stand with your two hands.
Note: Here shown may be somewhat different from your set.
The stand won't
move if you
don't press release button.
Wall Mount: Horizontal installation
<
20LC1R *
only
>
2-Ring
4 inches
spacers
4 inches
Place the
4 inches
ring spacers on the set before installing the
mounting bracket so that the inclination of the
backside of the set can be adjusted perpendicularly.
wall
4 inches
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup
Guide.
Desktop
Pedestal Installation
4 inches
4 inches
4 inches
4 inches
For proper ventilation, allow
the wall.
a
clearance of 4"
on
each side and from
3
Installation
Connection of TV
1. Connect the aerial cable to the socket marked +75 Ω
on
the back. For the best
reception
an
outdoor aerial should be used.
2. To connect
an
additional
equipment,
see
the Connection of external
equipment
section.
3. Connect the power cord.
Note: Here shown may be somewhat different from your set.
()
Positioning your display
Adjust
?
the
position
of the
panel
in various ways for maximum comfort.
Tilt range
12
Be careful that your hands are not
down when tilting the screen.
pressed
Location
Position your set
so
that
no
bright light
or
sunlight
falls
directly
onto the
screen.
Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the
back of the TV.
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
4
How to
wall
join the product assembly to the wall
set tumbling
protect the set
Please set it up
carefully
Set it up close to the wall so the
The instructions shown below is
when it is
the
product
so
the
doesn't fall
product
over
when it is
doesn't fall
pushed
to
over.
backwards.
safer way to set up the product, which is to fix it on the wall so the product doesn't fall over
in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent
pulled
product from damage
a
caused
by
fall. Please make
sure
that children don't climb
on or
hang
from the
product.
Accessories /
1-TV
2-TV Bracket Bolts
Bracket, 2-Wall Bracket
The Product Back Side
The Product Back Side
3
1
2
1. Use the bracket and the bolt to fix the
product to the wall as shown in the picture.
(not provided as parts of the product, must purchase separately) on
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product.
so it becomes horizontal between the wall and the product.
2. Secure the bracket with the bolt
the wall.
3.
It is safer to tie the rope
Notes
?
When
?
Use
?
To
moving the product to another place undo the ropes first.
product holder or a cabinet that is big and strong enough for the size and weight of the product.
use the product safely make sure that the height of the bracket that is mounted on the wall is same
a
as
that of the
product.
5
ENGLISH
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
of the set.
operate this
Only
adjusted
with the buttons
the remote control handset
on
supplied
the
top
will
set.
Remote control handset
10
MUTE
POWER
1
11
TV
INPUT
I/II
Before you use the remote control handset,
batteries. See the next page.
1.
12
2
LIST
MUTE
switches the sound
13
2.
TV
clears the
OK
VOL
menu
switches the set
PR
3.
VOL
4.
previously
8
SLEEP
ARC
PSM
standby.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
14
OK
accepts your selection
TEXT
9
15
UPDATE
from
on
F / G
789
0
viewed programme.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set
SSM
screen.
standby.
Q.VIEW
returns to the
5.
from
on
the programme table.
123
456
from the
LIST
displays
PR
7
off.
returns to the TV mode.
4
6
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
6.
7.
or
NUMBER BUTTONS
switches the set on from
SSM
the current mode.
displays
standby
and selects
(Sound Status Memory)
preferred sound setting.
recalls your
?
i
8.
M
ARC
select your desired
9.
picture
format.
SLEEP
sets the
sleep
timer.
10. INPUT
selects the remote operating mode.
switches the set on from standby.
[With ARC]
6
install the
Q.VIEW MENU
3
5
on or
please
a
programme.
Location and function of controls
11. POWER
switches the set
12. I/II
selects the
on
from
standby
language during
dual
or
off to
ENGLISH
standby.
language
broadcast.
13. MENU
selects
a menu.
10
MUTE
14. PSM (Picture Status
recalls your preferred
Memory)
picture setting.
POWER
1
11
TV
INPUT
I/II
12
2
15. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
LIST
Q.VIEW MENU
13
3
4
*
:
No function
COLOURED BUTTONS
TELETEXT
models)
or
:
These buttons
are
used for teletext
PR
(only
programme edit.
5
OK
VOL
VOL
PR
Battery
installation
The remote control handset is powered by two AAA/Alkaline type batteries. To load the batteries, turn
the remote control handset over
123
6
and open the battery compartment.
Install two batteries as indicated by
the
polarity symbols (
marked inside the
+
and
-
)
compartment.
456
789
7
8
SSM
SLEEP
0
PSM
*
TEXT
9
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
14
15
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
?
i
M
[Without ARC]
7
Location and function of controls
Front
Top panel
PR
VOL
OK
MENU
INPUT
/I
7
6
5
432
1
8
1.
ON/OFF(
6.
/I)
switches the set
on
from
standby
or
3.
a programme or a menu item.
switches the set on from standby.
INPUT
selects the remote
7.
REMOTE CONTROL SENSOR
switches the set
8.
POWER/STANDBY INDICATOR
operating mode.
on from standby.
MENU
selects
4.
a menu.
OK
accepts your selection
or
displays
mode.
5.
8
(Programme Down/Up)
selects
off to
standby.
2.
E / D
F / G
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
the current
illuminates orange in standby mode.
illuminates blue when the set is switched
on.
Location and function of controls
ENGLISH
Rear
23LC1R *
only
COMPONENT
VIDEO
COMPONENT
(VIDEO
/ AUDIO
Input)
L
AUDIO
R
PC SOUND
15/ 23LC1R *
PC INPUT
JACK
PC INPUT
ANTENNA
INPUT
INPUT
ANTIN(
75
)
PC SOUND
AV1
AC INPUT
H/P
AV2
AC INPUT
EURO SCART
AUDIO/VIDEO
SOCKET
INPUT
20LC1R *
FOR SERVICE
JACK
FOR SERVICE
S-VIDEO
HEADPHONE
S-VIDEO
JACK
INPUT
ANTENNA
INPUT
ANTIN(
75
)
AV1
AC INPUT
H/P
AV2
AC INPUT
EURO SCART
AUDIO/VIDEO
SOCKET
INPUT
S-VIDEO
S-VIDEO
INPUT
HEADPHONE
JACK
9
Basic
operation
On and off
Press the
1.
switch it
3.
Note
POWER
:
If, while the
INPUT
,
TV, INPUT
or
NUMBER buttons to
set is switched on, the mains
the set will switch to
replaced
TV
D / E
fully.
Press the POWER button. The set reverts to
Pull out mains plugs to switch the set off.
2.
MUTE
POWER,
on
standby
or
power
in the mains power socket.
on
standby
plug
mode.
is disconnected
when the mains
plug
is
I/II
Programme
selection
You
a
Q.VIEW MENU
can
select
programme number with the D / E
or
NUMBER
buttons.
PR
Volume
OK
VOL
VOL
adjustment
Press the F / G button to
PR
adjust
the volume.
Quick view
123
Press the Q.VIEW button to view the last programme you
456
789
SSM
were
watching.
Note : This function works only when Favourite programme is set
to Off. Otherwise each press of this button will select a stored
favorite programme.
0
Mute function
Press the MUTE button. The sound is switched off and the
display
appears.
You can cancel it
button.
On
screen
The
menu can
language
be
First select your
1.
3.
the
MUTE,
F / G
,
I/II,orSSM
selection
displayed
language.
on
the
screen
in your desired
Press the MENU button and then D / E
SPECIAL
2.
by pressing
language.
button to select the
menu.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
language.
All the
10
on screen
displays
will appear in the selected
4.
Press the OK button.
5.
Press the TV button to return to normal TV
viewing.
language.
On
ENGLISH
screen menus
Menu selection
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
1.
2.
the setting of an item in the sub or pull-down menu with
F/G button.
You can move to the higher level menu by pressing the OK
button and to move to the lower level menu by pressing the
MENU button.
Note :
a.
In the TV/AV mode, the SCREEN (20LC1R *) menu is not dis-
3.
Change
played.
b.
In the teletext mode, menus are not displayed.
On some models, the Language will not be displayed.
c.
STATION
MENU
PICTURE
Auto programme
PSM
Manual programme
CSM
Programme edit
Contrast
Favourite programme
Brightness
PR
OK
VOL
VOL
Colour
PR
Sharpness
D
E
MENU FG
D
OK
STATION
E
MENU FG
OK
PICTURE
menu
menu
SOUND
SPECIAL
Language
SSM
Input
AVL
Child lock
Balance
Power indicator
D
E
D
MENU FG
OK
SPECIAL
E
MENU FG
OK
SOUND
menu
menu
TIME
Clock
Off time
On time
Auto
D
E
sleep
MENU FG
OK
TIME
menu
11
Setting up
STATION
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Manual programme
Programme edit
Favourite programme
Auto programme
D
E
MENU FG
tuning
All stations that can be received are stored by this method. It is
recommended that you use auto programme during installation
of this set.
OK
1.
2.
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E button to select Auto
programme.
Auto programme
TV
System
BG
Storage from
I
Search
DK
L
MENU
D
E
PR
3.
OK
VOL
VOL
PR
123
4.
5.
6.
456
789
7.
MENU FG
OK
Press the G button. Select a TV system with the G button and
then D / E button on the System menu;
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L
: SECAM L/L' (France)
Press the OK button.
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
'05' for 5.
Press the D / E button to select Search.
Auto programme
0
System
Auto programme
Storage from
Search
To start
C21
BG
2
5%
MENU
:
Stop
MENU
8.
Press the G button to begin auto programming.
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
12
Press the TV button to return to normal TV
viewing.
Setting up
Manual programme
TV stations
ENGLISH
STATION
tuning
Auto programme
Manual programme
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
Press the MENU button and then D / E button to select the
STATION menu.
2.
Press the G button and then D / E button to select Manual
3.
programme.
Press the G button and then D / E button to select
Programme edit
Favourite programme
D
E
MENU FG
OK
Storage.
Manual programme
29
Storage
System
Channel
Fine
TV
Search
Name
MENU
D
E
4.
MENU FG
OK
Select the desired programme number (0 to
button or NUMBER buttons on the Storage
under 10 is entered with
5.
6.
a
99)
with the F / G
Any number
menu.
numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select System.
Select a TV system with the G button and then F / G button
the System menu;
BG
I
:
PAL B/G, SECAM B/G
PAL I/II (U.K./Ireland)
(Europe/East Europe)
DK
L
:
PAL D/K, SECAM D/K
(East Europe)
:
SECAM L/L'
:
OK
on
VOL
VOL
PR
123
(France)
7.
Press the OK button.
8.
Press the D / E button to select Channel.
Press the G button and then D / E button to select VHF/UHF
Cable on the Channel menu.
9.
PR
If
possible, select the channel number directly
buttons. Any number under 10 is entered with
456
or
with the number
a
numeric '0'
789
in
0
front of it, i.e. '05' for 5.
10. Press the OK button.
11. Press the D / E button to select Fine.
12. Use the F / G buttons to adjust frequency on your TV.
13. Press the OK button to store it.
14. Press the D / E button to select Search.
15. Press the G button and then F/G button to
the Search
ing
on
will
stop.
pull-down
menu.
If
a
commence
search-
station is found the search
Manual programme
Storage
System
Channel
Fine
FG
Search
Name
D
E
MENU FG
OK
16. Press the OK button to store it.
17. To store another
station, repeat steps 3
to 13.
18. Press the TV button to return to normal TV
viewing.
13
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
STATION
Auto programme
Manual programme
2.
Programme edit
3.
Favourite programme
E
MENU FG
1 to 2.
Press the G button and then D / E button to select Name.
Press the G button and then use the D / E You can use a blank,
.
+,
D
TV stations
-,thenumber0to9andthealphabetAtoZ.
+
A~Za~z[]0~9?!#-
OK
[]:blank
TV
MENU
PR
OK
VOL
VOL
PR
14
4.
With the F button you can select in the opposite direction.
Select the position by pressing the F / G button and then make
5.
your choice of the second character, and
Press the OK button to store it.
6.
Press the TV button to return to normal TV
so on.
viewing.
Setting up
Programme
TV stations
ENGLISH
STATION
edit
Auto programme
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
STATION menu.
2.
Press the G button and then D / E button to select
edit.
Programme
3.
Press the G button to
menu.
display
the
Programme edit
Manual programme
Programme edit
Favourite programme
D
E
MENU FG
OK
Programme edit
0C0 35S
6S17
2C1 2
7-----
3S6 6
8-----
4S6 7
9-----
Delete
E
1.
2.
a
Select
MENU FG
TV
Copy
Move
D
Deleting
69
1BLN03
Skip
MENU
OK
programme
programme to be deleted with the D / E orF/Gbutton.
a
Press the RED button twice.
The selected programme is deleted, all the
programmes are shifted up one position.
following
PR
OK
Programme edit
VOL
0C0 35S
69
1BLN03
6S17
2C1 2
7-----
3S6 6
8-----
4S6 7
9-----
VOL
PR
123
Delete
D
E
Copying
a
MENU FG
programme
programme to be
1.
Select
2.
Press the GREEN button.
All the
Moving
1.
a
following
456
OK
copied
programmes
with the D / E orF/Gbutton.
are
shifted down
one
position.
0
a
programme
Select a programme to be moved with the D / E orF/Gbutton.
2.
Press the YELLOW button.
3.
Move the programme to the desired programme number with
the D / E or F / G button.
4.
Press the YELLOW button
Skipping
1.
789
Select
a
a
again
programme number
programme number to be
to release this function.
skipped
with the D / E orF/G
button.
2.
3.
Press the BLUE button. The
skipped
Press the BLUE button
to release the
programme turns to blue.
skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
again
Press the TV button to return to normal TV
viewing.
15
Setting up
STATION
Favourite programme
Auto programme
This function lets you select your favourite programmes
Manual programme
Programme edit
Favourite programme
D
E
TV stations
directly.
1.
Press the MENU button and then D / E button to select the
STATION menu.
2.
Press the G button and then D / E to select Favourite
programme.
MENU FG
OK
Favourite programme
On
D
E
3.
TV
4.
5.
LIST
Q.VIEW MENU
6.
7.
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
MENU FG
OK
--
or
Off.
-----
.
the YELLOW button to select stored favourite
programmes.
OK
VOL
-----
--
Press the G button and then F / G button to select On
Press the D / E button to select
Select a desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the TV button to return to normal TV viewing.
Repeatedly press
PR
--
VOL
PR
Calling
the programme table
You
can check the programmes stored in the memory
the programme table.
123
456
Displaying programme
table
Press the LIST button to
display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
789
0C0 35S
0
6S17
2C12
7S22
3S66
8C09
4S67
9C11
D
E
Note
a.
b.
69
1BLN03
MENU FG
OK
:
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the
programme table indicate there is no station name assigned.
Selecting
Select
a
programme in the programme table
programme with the D / E
Then press the OK button.
a
or
F / G button.
The set switches to the chosen programme number.
Paging through
There
are
a
programme table
10 programme table pages in which contain 100
programmes.
Pressing the D / E
or
F / G button
repeatedly
Press the TV button to return to normal TV
16
turns the pages.
viewing.
Picture
PSM
adjustment
ENGLISH
PICTURE
(Picture Status Memory)
PSM
1.
Press the MENU button and then D / E
PICTURE menu.
2.
Press the G button and then D / E button to select PSM.
3.
the PSM
on
CSM
Contrast
Press the G button and then D / E button to select
ting
4.
button to select the
a
Brightness
Colour
picture
set-
Sharpness
menu.
D
Press the OK button.
E
MENU FG
OK
PICTURE
PSM
Dynamic
CSM
Standard
Contrast
Mild
Brightness
Game
Colour
User
Sharpness
D
MENU FG
E
5.
OK
TV
Press the TV button to return to normal TV
viewing.
MENU
picture (Dynamic, Standard, Mild,
on the remote control. The picture
User)
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
You
also recall
can
a
desired
with PSM button
Game
or
CSM
(Colour Status Memory)
PR
Selecting
a
factory setting
OK
VOL
colour set.
VOL
PR
1.
Press the MENU button and then D / E
PICTURE
2.
3.
button to select the
menu.
Press the G button and then D / E button to select CSM.
Press the G button and then D / E button to select a color set-
ting
on
the CSM
menu:
Cool, Normal,
Warm
or
User
(Red,
Green, Blue).
4.
Press the OK button.
5.
Press the TV button to return to normal TV
Picture
You
adjustment
PSM
adjust picture contrast, brightness,
sharpness to the levels you prefer.
1.
viewing.
can
colour
Press the MENU button and then D / E
PICTURE menu.
intensity,
button to select the
PICTURE
PSM
CSM
Contrast
47
Contrast
Brightness
D
E
Colour
D
Sharpness
E
MENU FG
Contrast
85 F
OK
3.
Press the D / E button to select the desired
Press the F / G button to make appropriate
4.
Press the TV button to return to normal TV
2.
G
picture
item.
adjustments.
viewing.
17
Sound
SOUND
SSM
AVL
SSM
(Sound Status Memory)
You
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Sports
Balance
adjustment
1.
Press the MENU button and then D / E button to select the
SOUND menu.
SOUND
D
E
MENU FG
OK
SSM
Flat
AVL
Music
Balance
Movie
Sports
G
User
D
E
2.
3.
TV
MENU FG
OK
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound
setting on the SSM menu.
Sound
Frequency Adjustment
Press the OK button in User.
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
a.
MENU
PR
OK
VOL
VOL
PR
0.1
0.3
1
3
8
Khz
D
E
MENU FG
OK
Press the TV button to return to normal TV
You
viewing.
also recall a desired sound setting (Flat, Music, Movie, Sports
or User) with SSM button on the remote control. The sound settings
Flat, Music, Movie and Sports are programmed for optimum sound
reproduction at the factory and cannot be changed.
can
If you press the SSM button after making appropriate
on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Sports.
Note
SSM
:
adjustment
SOUND
SSM
D
E
Sound
AVL
On
Balance
Off
MENU FG
OK
adjustment
You can adjust balance, AVL
AV L automatically keeps on
even if you
programmes.
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
Make desired adjustment with the F / G D / E and then press
change
1.
2.
3.
(Auto Volume Leveler).
an equal volume level
,
the OK button.
4.
18
Press the TV button to return to normal TV
viewing.
Sound
Stereo/Dual
When
ENGLISH
adjustment
reception
programme is selected, the sound information for the
station appears after the programme number and station name
a
disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II
button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the
Language
If
a
OK
loudspeakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
When NICAM
or
2.
When
NICAM
STEREO
FM
3.
mono
is received, you
can
select NICAM MONO
FM MONO.
or
stereo
is
received, you
FM MONO. If the stereo
can
signal
select
NICAM
is weak, switch to
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono
is selected the
MONO appears
display
on
the
screen.
Sound output selection
In AV mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
Repeatedly
L+R
:
and audio
L+L
R+R
:
:
signal
speaker.
Audio signal from
speakers.
Audio signal from
speakers.
from audio R
input
is sent to
right
loud-
audio L
input
is sent to left and
right
loud-
audio R
input
is sent to left and
right
loud-
19
TIME Menu
Clock
TIME
Clock
You must set the time
Off time
correctly
before
using
on/off time function.
On time
Auto
1.
sleep
Press the MENU button and then D/E
TIME
2.
D
E
button to select the
menu.
Press the G button and then D / E button to select Clock.
Time
MENU FG
OK
Clock
-i-i:i-i-
Off time
On time
Auto
D
E
sleep
MENU FG
OK
3.
Press the G button and then D/E button to
4.
Press the G button and then D/E button to
5.
Press the MENU button to
adjust the hour.
adjust the minute.
save.
MENU
On/Off time
The off timer
PR
1.
OK
VOL
switches the set to
Press the MENU button and then D/E
TIME
VOL
PR
automatically
standby
at the
preset time.
2.
button to select the
menu.
Press the G button and then D / E button to select Off time
or
On time.
3.
Press the G button and then D / E button to select On.
function, press the D/E button to
To cancel On/Off time
select Off.
Time
Clock
Off time
On time
Auto
-i-i:i-i-
sleep
Pr.
Vol.
0
30
On
D
E
MENU FG
OK
5.
Press the G button and then D / E button to adjust the hour.
Press the G button and then D / E button to adjust the minute.
6.
Only
4.
7.
Press the MENU button to
Note
a.
b.
function; Press the G button and then D/E
adjust volume level and programe number.
On time
button to
:
In the event of power interruption
failure), the clock must be reset.
automatically switch
has been pressed.
Once the
the
d.
20
on or
back to
or
power
on by the on time function it
standby mode unless a button
off time is set, these functions
operate daily
at
preset time.
Off Timer function overrides On Timer function if
the
e.
(disconnection
Two hours after the set is switched
will
c.
save.
same
they are
set to
time.
The set must be in
standby
mode for the On Timer to work.
TIME Menu
Auto
ENGLISH
TIME
sleep
Clock
Off time
If you select On on the Auto sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after a
TV station stops broadcasting.
1.
Press the MENU button and then D/E
TIME
2.
3.
button to select the
On time
Auto
D
E
menu.
sleep
MENU FG
OK
Press the G button and then D/E button to select Auto sleep.
Press the G button and then D / E button to select On or Off.
Time
Clock
Off time
On time
Auto
sleep
On
Off
D
MENU FG
E
4.
OK
MENU
Press the MENU button to
Sleep
save.
timer
PR
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
OK
VOL
VOL
PR
preset time has elapsed.
Press the SLEEP button to select the number of minutes.
The display
Min' will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
'
---
from the number of minutes selected.
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
sleep time, repeatedly press
Min' appears.
display
the SLEEP button
'
---
When you switch the set off, the set releases the
time.
preset sleep
SLEEP
21
Other functions
SPECIAL
TV,
Language
Input
AV and PC modes
be set for TV, AV
Child lock
Inputs
Power indicator
video cassette recorder
can
PC mode. AV mode is used when
or
(VCR),
or
other
equipment
a
is connected to
the set.
D
E
MENU FG
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
OK
1.
Press the MENU button and then D / E button to select the
SPECIAL
2.
3.
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, RGB-DTV, RGB-PC
or
Component.
SPECIAL
TV
Language
MENU
Input
TV
Child lock
AV1
Power indicator
AV2
RGB-DTV
RGB-PC
Component
D
E
PR
OK
The AV and PC modes
OK
VOL
MENU FG
VOL
PR
are :
AV 1
:
VCR connected to the Euro scart socket of the set.
AV 2
:
VCR connected to the AV2
RGB-DTV
RGB-PC
:
:
Component
:
(15/23LC1R * )
DVD connected to the COMPONENT sockets
the back of set.
Press the TV button to return
Auto AV
S-Video of the set.
PERSONAL COMPUTER connected to the PC
socket of the set.
4.
or
SET TOP connected to the PC INPUT and PC
SOUND socket of the set. (15/23LC1R * )
on
(23LC1R * only)
to normal TV viewing.
switching
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV1 mode automatically. But
if you want to
BER buttons.
22
keep
on
watching
TV mode, press the D / E
or
NUM-
Other functions
ENGLISH
SETUP
Child lock
Language
The TV
can
be set
so
Input
that the remote control handset is needed to
control it. This feature
can
be used to
Child lock
prevent unauthorized view-
Power indicator
ing.
1.
Press the MENU button and then D / E button to select the
SPECIAL
2.
3.
D
menu.
E
MENU FG
OK
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock menu.
SPECIAL
Language
Input
Child lock
On
Power indicator
Off
TV
D
E
4.
MENU FG
MENU
OK
Press the TV button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the top panel is pressed while viewing the TV.
PR
OK
VOL
Power indicator
Use this function to set the power indicator
on
the front side of the
indicator
product to On or Off. If you set On at any time, the power
will automatically be turned on. Although you select Off,
light turns on for a moment when the set turns on.
1.
3.
set front
Press the MENU button and then D / E button to select the
SPECIAL
2.
VOL
PR
menu.
Press the G button and then D / E button to select Power indicator.
Press the G button and then D / E button to select On or Off
on the Power indicator menu.
SPECIAL
Language
Input
Child lock
Power indicator
On
Off
D
E
4.
MENU FG
OK
Press the TV button to return to normal TV
viewing.
23
Teletext
-
This feature is not available in all countries.
Teletext
is an optional function, therefore only a set with the telereceive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices
and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages which are
selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext
information.
text
(or TOP text)
system
can
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last page
appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off
teletext. The previous mode reappears.
PR
OK
PR
SIMPLE text
selection
Enter the desired page number as a three digit number with the NUMBER
buttons. If during selection you press a wrong number, you must complete
the three digit number and then re-enter the correct page number.
The D / E button can be used to select the preceding or following page.
Page
1.
123
456
2.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
ton to switch to LIST mode.
Programming
789
M
but-
0
TEXT
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
?
i
Four teletext page numbers of your choice can be colour coded and easily
selected by pressing the corresponding coloured button on the remote control
handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to programme.
3.
Press the OK button. Then the selected page is stored as the selected
page number by blinking once. From now on, you can select this page
with the same coloured button.
4. The three other coloured buttons are programmed in this way.
M
TOP text
The user guide displays four fields-red, green, yellow and blue at the bottom
of the screen. The yellow field denotes the next group and the blue field indicates the next block.
Block / group / page selection
1.
2.
3.
4.
24
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D button can be used.
The red button permits to return to previous selection. Alternatively the E
button can be used.
Teletext
Direct page selection
Corresponding to the SIMPLE teletext mode, you
ber using the NUMBER buttons in TOP mode.
can
ENGLISH
select
a
page
by entering
it
as a
three
digit
num-
FASTEXT
The teletext pages are colour coded
corresponding coloured button.
along
the bottom of the
selection
Press the
i button to select the index page.
You can select the pages which are colour coded
screen
and
are
selected
by pressing
the
Page
1.
2.
along
the bottom line with the
same
coloured but-
tons.
3.
4.
to the SIMPLE teletext mode, you can select a page by entering its three
number with the NUMBER buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
Corresponding
Special
?
digit
page
teletext functions
REVEAL
Press this button to display concealed information, such as solutions of riddles
Press this button again to remove the information from the display.
or
puzzles.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
UPDATE
Displays the
display
TV
on the screen while waiting for the new teletext page.
will appear at the top left hand corner of the screen. When the
is available then display
will change to the page number.
Press this button to view the updated teletext page.
picture
The
updated
page
HOLD
the automatic page change which will occur if a teletext page consists of 2 or more sub
pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below
the time. When this button is pressed the stop symbol is displayed at the top left-hand corner
of the screen and the automatic page change is inhibited.
To continue press this button again.
Stops
MIX
Displays the teletext pages superimposed on the TV
To switch the TV picture off press this button again.
picture.
TIME
When viewing a TV programme, press this button to display the time at the top left hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this
button to select a sub page number. The sub page number is displayed at the bottom of the
screen. To hold or change the sub page, press the NUMBER buttons.
Press again to exit this function.
25
Connection of external
equipment
You
can connect additional equipment, such
etc. to your set. Examples are shown below.
(-
This
as
VCRs, camcorders
part of Connection of external equipment mainly
use
tures for the 23LC1R * .)
pic-
Aerial socket
PC INPUT
ANTIN(75)
PC SOUND
1.
H/P
S-VIDEO
AV2
2.
3.
4.
VCR
5.
Connect the RF out socket of the VCR to the aerial socket of
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Euro scart socket
1.
2.
PC INPUT
A
AV1
(VCR)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
want to keep on watching in TV mode, press the D / E or NUMBER buttons.
AV2
Otherwise press the INPUT button on the remote control
handset to select AV1. The VCR play back picture appears
the screen.
You
VCR
can
also record programmes received
by
the TV
on
on
video
tape.
Note
a.
b.
C.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart and the AV 1 can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
If the S-VHS signal is received through the S-VIDEO, you must
change to the S-Video mode.
Please use shielded scart cable.
Signal type RGB,
S-Video/Audio in sockets
PC INPUT
ANTIN(
75
)
PC SOUND
H/P
AV2
S-V DEO
When
connecting
picture quality will
1.
an
(S-Video)
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket
of the set.
S-VIDEO VCR
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
26
3.
Press the INPUT button to select AV2.
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Connection of external
Euro scart socket
equipment
ENGLISH
(DVD)
PC INPUT
1.
2.
3.
Press the PLAY button on the DVD.
The DVD playback picture appears on the
DVD
1.
input
sockets
screen.
DVD
(15/23LC1R * )
COMPONENT
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
Y PB PR) of the DVD to the COMPONENT/VIDEO sockets (Y
PR)
VIDEO
of the set.
L
2.
Connect the audio cable from the DVD to COMPONENT/
AUDIO sockets of the set.
3.
Press the INPUT button to select Component.
Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
4.
DTV in sockets
S-V
AV2
or
PB
ANT IN
AV1
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
Press the INPUT button to select AV1.
AUDIO
R
DVD
(15/23LC1R * )
PC INPUT
75
ANTIN(
)
PC SOUND
H/P
1.
Connect the SET TOP outputs to the COMPONENT/VIDEO
sockets (Y PB PR) on the set. (or, connect the SET TOP with the
D-Sub output socket to PC INPUT socket on the set and audio
cable of the SET TOP to the PC SOUND. (15/23LC1R * ))
2.
3.
Connect the audio cable from the SET TOP to COMPONENT/
AUDIO sockets of the set.
Press the INPUT button to select
RGB-DTV (15/23LC1R * ).
S-VIDEO
AV2
DTV Reciever
Component (23LC1R * only)
COMPONENT
or
VIDEO
Audio/Video in sockets
L
AUDIO
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the INPUT button to select AV2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
R
DTV Reciever
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
PC INPUT
ANTIN(
75
)
PC SOUND
H/P
S-VIDEO
AV2
Headphone
socket
VCR
Insert the
can
listen
headphone plug to the headphone socket of the set. You
to the sound through the headphone. To adjust the head-
phone volume,
press the F / G button. If you press the MUTE but-
ton, the sound from the headphone is switched off.
PC INPUT
ANTIN(
75
)
PC SOUND
H/P
AV2
S-VIDEO
27
Connection of PC
PC in socket
PC INPUT
ANTIN(
75
)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND
sockets of the set.
Press the INPUT button to select RGB-PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
1.
H/P
S-VIDEO
AV2
2.
3.
4.
PERSONAL COMPUTER
Displayable
MODE
VGA
Monitor
Resolution
Specification
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640x480
31.4
60
800x600
35.1
56
800x600
37.8
60
XGA
1024x768
48.3
60
WXGA
1360x768
47.6
60
SVGA
form
(Synchronization input
Note
(15/23LC1R * )
PC SOUND
:
23"
only
separate)
:
a.
If the set is cold, there may be
nothing wrong with the set.
b.
If possible, use the VESA 1024x768@60Hz (15") / 1360x768@60Hz (23") video mode to obtain the
best image quality for your LCD monitor. If used under the other resolutions, some scaled or
a
small "flicker" when the set is switched
processed pictures may appear on the screen. The
1024x768@60Hz (15") / 1360x768@60Hz (23").
c.
set has been
Some dot defects may appear on the screen, like Red, Green
impact or effect on the monitor performance.
or
on.
This is normal, there is
pre-adjusted
Blue
to the mode VESA
spots. However, this will have
no
d.
Do not press the LCD screen with your
distortion effects on the screen.
e.
When the PC
will differ
f.
screen
according
appears
(Display
Power
range"
28
a
for
a
long
as
this may
produce
some
temporary
message may appear on the screen, and the message
a message appears click "Next" until the
on
the screen,
adjust
the PC
as
in the
'Displayable
Monitor
mode
saving mode, automatically
supplied signal
time
system version. If
appears
Management)
When the PC is in the power
energy.
Note : Use the
the set,
to the Window
message finishes.
If the message "out of
Specification' section.
DPM
on
finger
the monitor goes into DPM mode to
cable with the set. Otherwise, DPM mode may not work.
save
the
Connection of PC
SCREEN
ARC
PC
Setup (15/23LC1R )
You
can
*
Auto
configure
configure
Manual
1.
E
2.
MENU FG
OK
*
:
adjust
auto
configure,
manual
configure
and reset
as
you
prefer.
Reset
D
ENGLISH
*
23LC1R *
only
3.
Press the INPUT button and then D / E button to select the
RGB-PC.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select the desired
screen function.
SCREEN
ARC
*
Auto
configure
configure
To start
Manual
Reset
INPUT
D
MENU
E
4.
OK
Make
appropriate adjustments.
Auto
configure
This function is for the automatic adjustment of the screen position, clock and phase. The displayed image will disappear for a
few seconds while the Auto-configuration is in progress.
PR
OK
VOL
MENU FG
VOL
Manual
PR
configure
This function is for the manual adjustment of the screen position, clock and phase. Press the F / G button to make appro-
priate adjustments.
H-Position / V-Position
This function is to adjust picture to
?
prefer.
?
left/right
and
up/down
as
you
Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
?
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually.
5.
Press the OK button to store it for the PC monitor
picture.
29
Connection of PC
Picture format
You
(23LC1R * only)
watch TV in various
can
picture formats; Full, 16:9, 14:9,
Zoom, Spectacle, Original, 4:3.
press the ARC button to select your desired
Repeatedly
picture
format.
Full
When your TV receives the wide screen signal, it will lead you to
adjust the picture horizontally or vertically, in a linear proportion, to
fill the entire
screen
fully. (Not
available in all
countries)
16:9
You can
TV
MENU
14:9
You can
enjoy
through
the 14:9 mode.
The
PR
the
picture
format of 14:9
14:9 is viewed
screen
just like
right.
or
that the
general
screen
TV programme
4:3 is
magnified
to the upper / lower and left /
OK
VOL
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is
magnified to the left and right so that the screen 16:9 is full.
VOL
PR
Zoom
You can
The
so
enjoy
screen
that the
the cinema in
4:3 is
magnified
screen
a
vast
through
screen
the Zoom mode.
to the upper / lower and left /
16:9 is full. The bottom and
right sides
top of the picture
may be lost.
Spectacle
When your TV receives the wide
adjust the picture horizontally, in
entire
screen
a
signal, it will lead
proportion, to
nonlinear
you to
fill the
screen.
Original
ARC
When your TV receives the wide screen signal, it will be automatically
changed to the picture format to be sent. (Not available in all countries)
4:3
This
picture
Note
30
:
ARC
format is 4 to 3 of
menu
general
TV.
is not available in RGB-PC mode.
T roubleshooting Checklist
Checklist
The
?
doesn't work
Power is
suddenly
Check to
control
The remote control
does not work
operation
see
if there is any
obstruction.
object
normally.
between the
product
Are batteries installed with correct
?
Correct remote
?
Install
new
?
Is the
sleep
?
Check the power control settings. Power interrupted
No broadcast on station tuned with Auto off activated.
?
and the remote
causing
?
turned off
ENGLISH
operating
polarity (+
mode set:
to +,
-
to
-)?
TV, VCR etc.?
batteries.
timer set?
The video function does not work.
No
picture
&
No sound
Check whether the
?
Try
?
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
?
Picture appears
slowly after
switching
?
Test the wall power outlet, plug another product's power cord into the outlet
where the product's power cord was plugged in.
?
This is
or
on
poor color
poor
picture
normal, the image is muted during the product startup process.
Please contact your service center, if the
minutes.
?
or
with the broadcast.
?
?
No
product is turned on.
problem may be
another channel. The
?
?
?
picture
has not
appeared
after five
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
ture
Poor
reception
some
Lines
in
picshaking
on
channels
or
?
Check for local interference such
?
Station
or
?
Station
signal
?
Check for
?
Check antenna
or
streaks
pictures
cable
is
as an
electrical
product experiencing problems,
weak, reorient
sources
of
possible
(Change
appliance
or
power tool.
tune to another station.
antenna to receive weaker station.
interference.
the direction of the
antenna).
31
The audio function does not work.
No
?
Press the VOL
Picture OK &
?
Sound muted? Press MUTE button.
No sound
?
Try
?
Are the audio cables installed
?
Adjust
?
A
output from
of the
one
another channel. The
Balance in
problem may be
properly?
with the broadcast.
option.
menu
speakers
Unusual sound
from inside the
in ambient
change
noise when the
product
the
humidity or temperature may result in an unusual
product is turned on or off and does not indicate a fault with
product.
There is
signal
range.
Vertical bar
PC mode
horizontal
?
Adjust resolution,
?
Check it whether the
?
Check the
?
Work the Auto
?
Check the
?
Reinstall the PC video card.
is out of
input
in PC mode.
problem
a
(Only
The
button.
(or Volume)
applied)
frequency,
or
vertical
cable is connected
signal
frequency.
loose.
or
source.
or
stripe on background &
configure
or
adjust clock, phase,
or
H/V
position.
Horizontal Noise &
Incorrect
position
Screen color is
unstable
single
or
cable.
signal
color
Product
Power
Power
Specifications
Specifications
Requirement/
Consumption
Dimensions
(Width
x
Depth
x
Height)
Weight (Net)
Television
System
Programme Coverage
External Antenna
*
The
Impedance
specifications
15LC1R *
20LC1R *
23LC1R *
:
:
AC100-240V~50/60Hz 0.8A / 40W
AC100-240V~50/60Hz 1.2A / 65W
AC100-240V~50/60Hz 1.4A / 120W
15LC1R
*
:
377.6mm
20LC1R *
:
23LC1R *
:
15LC1R *
20LC1R *
23LC1R *
:
:
:
:
PAL/SECAM
VHF: E2
x 242.8mm x 394.5mm
14.9inches x 9.6inches x 15.5inches
492.2mm x 272.8mm x 483.3mm
19.3inches x 10.7inches x 19.0inches
611.0mm x 273.0mm x 485.0mm
24.0inches x 10.7inches x 19.0inches
5.6kg (12.3lbs)
8.7kg (19.1lbs)
10.4kg (22.9lbs)
B/G/D/K, PAL I/II, SECAM L/L'
E12, UHF: E21
~
E69, CATV: S1
~
S20, HYPER: S21
~
75Ω
shown above may be
changed
without
prior
notice for
S47
~
quality improvement.
Download PDF

advertising