LG | 23LC1R | LG 23LC1R Owner’s Manual

LCD TV
OWNER'S MANUAL
MODELS: 23LC1R
*
Please read Information Manual included together
before reading this manual and operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
and quote
require service.
this information to your dealer when you
P/NO
:
38289U0031B(0607-REV01)
Printed in Korea
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation / Front/ Rear
6
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection
10
On
11
screen menus
Menu selection
12
up TV stations
Auto programme tuning
Manual programme tuning
Assigning a station name
Programme edit
Favourite programme
Calling the programme table
Setting
Picture adjustment
PSM (Picture Status
Picture adjustment
Picture format
Sound
17
Memory)
19
adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/ Dual reception
NICAM reception / Sound output selection
Time Menu
Clock / On/Off time
Auto sleep / Sleep timer
21
Other functions
23
TV, AV and PC modes
Auto AV
switching
/ Child lock / Power indicator
Teletext
Switch on/off
SIMPLE text / TOP text
FASTEXT / Special teletext functions
25
Connection of external
27
equipment
Aerial socket
Euro scart socket (VCR) / S-Video/Audio in sockets
Euro scart socket (DVD)
DVD input sockets / DTV in sockets
Audio/Video in sockets / Headphone socket
Connection of PC
(S-Video)
29
PC in socket
PC Setup
Troubleshooting
Product
2
check list
Specifications
31
32
Installation
Unfolding
ENGLISH
the stand base
1. Place the set with its front
facing
downward
on a
cushion
2. Hold down the release button inside the stand and
or
soft cloth.
strongly pull
out the stand with your two hands.
Note: Here shown may be somewhat different from your set.
The stand won't
move if you
don't press release button.
Wall Mount: Horizontal installation
4 inches
4 inches
4 inches
4 inches
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup
Guide.
3
Installation
Desktop
Pedestal Installation
4 inches
4 inches
4 inches
4 inches
For proper ventilation, allow
the wall.
a
clearance of 4"
on
each side and from
Connection of TV
1. Connect the aerial cable to the socket marked +75 Ω
on
the back. For the best
reception
an
outdoor aerial should be used.
2. To connect
an
additional
equipment,
see
the Connection of external
3. Connect the power cord.
Note: Here shown may be somewhat different from your set.
()
4
equipment
section.
Installation
ENGLISH
Positioning your display
Adjust
?
the
position
of the
panel
in various ways for maximum comfort.
Tilt range
12
Be careful that your hands
down when tilting the
pressed
are
not
screen.
Location
Position your set
so
that
no
bright light
or
sunlight
falls
directly
onto the
screen.
Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the
back of the TV.
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
5
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
of the set.
operate this
Only
adjusted
with the buttons
the remote control handset
on
supplied
the
top
will
set.
Remote control handset
10
MUTE
POWER
1
11
TV
INPUT
I/II
Before you use the remote control handset,
batteries. See the next page.
1.
12
2
LIST
MUTE
switches the sound
13
2.
off.
TV
returns to the TV mode.
4
clears the
OK
VOL
menu
switches the set
PR
3.
VOL
4.
screen.
standby.
Q.VIEW
returns to the
5.
from
on
the programme table.
123
456
from the
LIST
displays
PR
6
install the
Q.VIEW MENU
3
5
on or
please
previously
viewed programme.
/
(Programme Up/Down)
selects a programme or a menu item.
switches the set
on from standby.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
/
789
7
8
SSM
SLEEP
0
ARC
PSM
14
TEXT
9
15
UPDATE
OK
accepts your selection
TIME
6.
NUMBER BUTTONS
on from
switches the set
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
7.
or
SSM
the current mode.
displays
standby
and selects
a
programme.
(Sound Status Memory)
preferred sound setting.
recalls your
?
i
8.
M
ARC
select your desired
9.
picture
format.
SLEEP
sets the
sleep
timer.
10. INPUT
switches the set on from standby.
If you press the button once, the input source
Input
TV
OSD will appear on screen as shown. Press the
AV1
AV2
S-video
Component
PC
E
6
OK
/
desired
button and then OK button to select the
input
Component
source
or
PC).
(TV,
AV1
,
AV 2
,
S-video,
Location and function of controls
11. POWER
switches the set
12. I/II
selects the
on
from
standby
language during
dual
or
off to
ENGLISH
standby.
language
broadcast.
13. MENU
selects
a menu.
10
MUTE
14. PSM (Picture Status
recalls your preferred
Memory)
picture setting.
POWER
1
11
TV
INPUT
I/II
12
2
15. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
LIST
Q.VIEW MENU
13
3
4
COLOURED BUTTONS
TELETEXT
models)
or
: These buttons
programme edit.
are
used for teletext
(only
PR
5
Battery
OK
VOL
installation
VOL
PR
123
The remote control handset is powered by two AAA batteries. To load
the batteries, turn the remote control handset over and open the bat-
tery compartment. Install
teries
as
symbols (
the
indicated
+
and
-
by
)
the
6
two bat-
456
789
polarity
marked inside
compartment.
7
8
SSM
0
SLEEP
ARC
PSM
TEXT
9
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
14
15
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
?
i
M
7
Location and function of controls
Front
Top panel
PR
VOL
OK
MENU
INPUT
/I
7
6
5
432
1
8
1.
ON/OFF(
6.
/I)
switches the set
on
from
standby
or
3.
INPUT
selects the remote operating mode.
switches the set on from standby.
MENU
selects
4.
a menu.
OK
accepts your selection
or
displays
mode.
5.
8
/
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
the current
(Programme Down/Up)
a programme or a menu item.
switches the set on from standby.
off to
standby.
2.
/
selects
7.
REMOTE CONTROL SENSOR
8.
POWER/STANDBY INDICATOR
illuminates orange in standby mode.
illuminates blue when the set is switched
on.
Location and function of controls
ENGLISH
Rear
COMPONENT
VIDEO
COMPONENT
(VIDEO
/ AUDIO
Input)
L
AUDIO
R
PC SOUND
PC INPUT
JACK
PC INPUT
ANTENNA
INPUT
INPUT
ANTIN(
75
)
PC SOUND
AV1
H/P
AC IN
AV2
AC INPUT
EURO SCART
AUDIO/VIDEO
SOCKET
INPUT
S-VIDEO
S-VIDEO
INPUT
HEADPHONE
JACK
9
Basic
operation
On and off
1.
Press the
switch it
2.
3.
POWER
:
If, while the
INPUT
,
TV, INPUT
or
NUMBER buttons to
set is switched on, the mains
the set will switch to
replaced
TV
/
fully.
Press the POWER button. The set reverts to
Pull out mains plugs to switch the set off.
Note
MUTE
POWER,
on
standby
or
power
in the mains power socket.
on
standby
plug
mode.
is disconnected
when the mains
plug
is
I/II
Programme
selection
You
a
Q.VIEW MENU
can
select
programme number with the
/
or
NUMBER
buttons.
PR
Volume
OK
VOL
adjustment
VOL
Press the
/
button to
PR
adjust
the volume.
Quick view
123
Press the Q.VIEW button to view the last programme you
456
789
SSM
were
watching.
Note : This function works only when Favourite programme is set
to Off. Otherwise each press of this button will select a stored
favorite programme.
0
Mute function
Press the MUTE button. The sound is switched off and the
display
appears.
You can cancel it
button.
On
screen
The
menu can
language
be
the
on
the
screen
Press the MENU button and then
Setup
/
MUTE,
,
I/II,orSSM
selection
displayed
language.
First select your
1.
by pressing
in your desired
/
language.
button to select the
menu.
2.
Press the
button and then
/
3.
Press the
button and then
/
button to select
Language.
button to select your desired
language.
All the
10
on screen
displays
will appear in the selected
4.
Press the OK button.
5.
Press the TV button to return to normal TV
viewing.
language.
On
ENGLISH
screen menus
Menu selection
1.
2.
Press the MENU button and then
Press the
button and then
/
/
button to display each menu.
button to select a menu item.
the setting of an item in the sub or pull-down menu with
button.
/
You can move to the higher level menu by pressing the OK
button and to move to the lower level menu by pressing the
MENU button.
Note :
a.
In the TV, AV, S-video or COMPONENT mode, the PC menu is
3.
Change
not
b.
displayed.
In the teletext mode,
menus are
not
displayed.
MENU
Picture
Channel
PR
Auto programme
PSM
Manual programme
Contrast
Programme edit
Brightness
Favourite programme
Colour
OK
VOL
Sharpness
DEFG
OK
DEFG
MENU
Channel
OK
PR
MENU
Picture
menu
VOL
menu
Sound
Setup
SSM
Language
AVL
Input
Balance
Child lock
Power indicator
DEFG
OK
MENU
Setup
DEFG
OK
MENU
Sound
menu
menu
Time
Time
Off time
On time
Auto off
DEFG
OK
MENU
Time
menu
11
Setting up
Channel
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the
/
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Manual programme
Programme edit
Favourite programme
Auto programme
DEFG
OK
tuning
All stations that can be received are stored by this method. It is
recommended that you use auto programme during installation
of this set.
MENU
1.
2.
Press the MENU button and then
Channel menu.
Press the
button and then
/
button to select the
/
button to select Auto
programme.
Auto programme
TV
System
BG
Storage from
I
Search
DK
L
MENU
M
DEFG
PR
3.
OK
VOL
VOL
PR
123
4.
5.
456
6.
789
7.
0
OK
MENU
Press the
button. Select a TV system with the
button and
then
button on the System menu;
/
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
L
: SECAM L/L' (France)
M
: (USA/Korea/Philippines)
Press the OK button.
Press the
button to select Storage from.
/
Select the beginning programme number with the
button
/
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
'05' for 5.
Press the
button to select Search.
/
Auto programme
System
Storage from
Search
C21
2
BG
5
%
MENU
8.
Press the
button to begin auto programming.
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
12
Press the TV button to return to normal TV
viewing.
Setting up
Manual programme
TV stations
tuning
Auto programme
Manual programme
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
Press the MENU button and then
Channel menu.
2.
Press the
3.
programme.
Press the
button and then
ENGLISH
Channel
button and then
/
Favourite programme
button to select the
/
DEFG
OK
MENU
button to select Manual
button to select
/
Programme edit
Storage.
Manual programme
29
Storage
System
Channel
Search
TV
Name
MENU
DEFG
4.
OK
MENU
Select the desired programme number (0 to
button or NUMBER buttons on the Storage
under 10 is entered with
a
Press the
/
6.
Select
system with the
the
BG
TV
System
:
I
:
DK
:
L
:
M
:
with the
Any
/
number
numeric '0' in front of it, i.e. '05' for 5.
5.
a
99)
menu.
button to select
button and then
/
button
on
menu;
PAL B/G, SECAM B/G
PAL I/II (U.K./Ireland)
(Europe/East Europe)
PAL D/K, SECAM D/K
(East Europe)
(France)
(USA/Korea/Philippines)
SECAM L/L'
7.
Press the OK button.
8.
button to select Channel.
/
Press the
button and then
button to select VHF/UHF or
/
Cable on the Channel menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
9.
PR
System.
OK
VOL
VOL
PR
123
456
Press the
789
0
10. Press the OK button.
button to select Search.
/
button and then
button to commence searching
/
the Search pull-down menu. If a station is found the search will
11. Press the
12. Press the
on
stop.
Manual programme
Storage
System
Channel
Search
Name
DEFG
OK
MENU
13. Press the OK button to store it.
14. To store another
station, repeat steps 3
to 13.
15. Press the TV button to return to normal TV
viewing.
13
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
Channel
Auto programme
Manual programme
Programme
TV stations
2.
edit
Favourite programme
3.
Press the
button and then
/
Press the
button and then
use
1 to 2.
button to select Name.
the
/
.
You
can use a
4.
-,thenumber0to9andthealphabetAtoZ.
button you can select in the opposite direction.
Select the position by pressing the
button and then
/
5.
your choice of the second character, and
Press the OK button to store it.
6.
Press the TV button to return to normal TV
blank,
+,
With the
DEFG
OK
MENU
TV
MENU
PR
OK
VOL
VOL
PR
14
so on.
viewing.
make
Setting up
Programme
TV stations
Auto programme
Manual programme
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then
Channel
2.
Programme edit
Favourite programme
button to select the
/
menu.
Press the
ENGLISH
Channel
edit
DEFG
button and then
button to select
/
OK
MENU
Programme
edit.
3.
Press the
button to
display
the
0C0 35S
Deleting
a
Programme edit
69
1BLN03
6S17
2C1 2
7-----
3S6 6
8-----
4S6 7
9-----
Delete
Copy
Move
Skip
TV
MENU
programme
programme to be deleted with the
1.
Select
2.
Press the RED button twice.
a
menu.
/
The selected programme is deleted, all the
programmes are shifted up one position.
/
or
button.
following
PR
OK
VOL
0C035S
69
1BLN03
6S17
2C1 2
7-----
3S66
8-----
4S67
9-----
VOL
PR
123
Delete
456
Copying
a
programme
programme to be
1.
Select
2.
Press the GREEN button.
All the
Moving
a
following
copied
programmes
with the
are
/
or
shifted down
one
button.
position.
789
0
a
1.
programme
Select a programme to be moved with the
2.
Press the YELLOW button.
3.
/
/
/
or
button.
Move the programme to the desired programme number with
or
button.
/
/
the
4.
Press the YELLOW button
Skipping
1.
Select
a
a
again
programme number
programme number to be
to release this function.
skipped
with the
/
or/
button.
2.
3.
Press the BLUE button. The
skipped
Press the BLUE button
to release the
programme turns to blue.
skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the
button during normal TV
/
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
again
Press the TV button to return to normal TV
viewing.
15
Setting up
TV stations
Favourite programme
Channel
Auto programme
This function lets you select your favourite programmes
Manual programme
Programme edit
Favourite programme
1.
Press the MENU button and then
Channel menu.
2.
Press the
button and then
/
directly.
button to select the
to select Favourite
/
programme.
DEFG
OK
MENU
Favourite programme
On
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
DEFG
3.
TV
4.
5.
LIST
Q.VIEW MENU
6.
7.
VOL
PR
/
button to select On
button to select
-----.
/
Select a desired programme with the
/
button.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
Press the TV button to return to normal TV viewing.
or
Off.
--
the Q.VIEW button to select stored favourite
programmes.
OK
VOL
MENU
button and then
Press the
Press the
Repeatedly press
PR
OK
Calling
the programme table
You
can check the programmes stored in the memory
the programme table.
Displaying programme
table
Press the LIST button to
display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0C035S
Note
a.
b.
69
1BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
:
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the
programme table indicate there is no station name assigned.
Selecting
Select
a
programme in the programme table
or
/
button.
/
programme with the
Then press the OK button.
The set switches to the chosen programme number.
a
Paging through
There
are
a
programme table
10 programme table pages in which contain 100
programmes.
Pressing the
/
or
/
button
repeatedly
Press the TV button to return to normal TV
16
turns the pages.
viewing.
Picture
PSM
adjustment
(Picture Status Memory)
ENGLISH
Picture
PSM
1.
Press the MENU button and then
Picture
Press the
3.
Press the
ting
on
Contrast
Brightness
menu.
2.
4.
button to select the
/
button and then
button and then
the PSM
Colour
button to select PSM.
/
button to select
/
a
picture
Sharpness
set-
menu.
Press the OK button.
DEFG
OK
MENU
Picture
PSM
Dynamic
Contrast
Standard
Brightness
Mild
Colour
Game
Sharpness
User
DEFG
5.
OK
TV
MENU
Press the TV button to return to normal TV
viewing.
MENU
picture (Dynamic, Standard, Mild,
Game or User) with PSM button on the remote control. The picture
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
You
can
also recall
a
desired
PR
Picture
adjustment
OK
VOL
You
adjust picture contrast, brightness,
sharpness to the levels you prefer.
1.
can
Press the MENU button and then
Picture
/
colour
intensity,
VOL
PR
button to select the
menu.
Picture
PSM
Contrast
47
Contrast
Brightness
Colour
Sharpness
PSM
DEFG
OK
MENU
2.
Press the
3.
Press the
4.
Press the TV button to return to
Note
:
Only
/
/
button to select the desired
picture
item.
button to make
Contrast and
appropriate adjustments.
normal TV viewing.
Brightness
are
displayed
in PC mode.
17
Picture
adjustment
Picture format
You
watch TV in various
can
picture formats; 16:9, 14:9, Zoom,
Auto, 4:3.
Repeatedly
press the ARC button to select your desired
picture
for-
mat.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
14:9
You can
TV
through
The
MENU
The
so
OK
VOL
VOL
PR
the
picture
format of 14:9
or
TV programme
general
14:9 is viewed
screen
just like
right.
that the
screen
4:3 is
magnified
to the upper / lower and left /
Zoom
You can
PR
enjoy
the 14:9 mode.
enjoy
screen
that the
the cinema in
4:3 is
magnified
screen
a
vast
screen
through
the Zoom mode.
to the upper / lower and left /
16:9 is full. The bottom and
top
right sides
picture
of the
may be lost.
Auto
When your set receives the wide screen signal, it will be automatically changed to the picture format to be sent.
4:3
This
picture
Note
ARC
18
:
format is 4 to 3 of
In PC mode
only
general
16:9 and 4:3
TV.
aspect ratios
are
available.
Sound
SSM
You
ENGLISH
Sound
(Sound Status Memory)
SSM
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Speech
1.
adjustment
Press the MENU button and then
Sound menu.
AVL
Balance
button to select the
/
Sound
DEFG
SSM
Flat
AVL
Music
Balance
Movie
OK
MENU
Speech
G
User
DEFG
2.
3.
Press the
Press the
setting
on
Sound
OK
MENU
button and then
button and then
the SSM menu.
button to select SSM.
button to select a sound
/
/
TV
Frequency Adjustment
Press the OK button in User.
b. Select a sound band by pressing the
button.
/
c. Make appropriate sound level with the
button.
/
d. Press the OK button to store it for the sound User.
a.
MENU
PR
OK
VOL
VOL
PR
0.1
0.5
1.5
10Khz
5
Press the TV button to return to normal TV
You
viewing.
also recall a desired sound setting (Flat, Music, Movie, Speech
or User) with SSM button on the remote control. The sound settings
Flat, Music, Movie and Speech are programmed for optimum sound
reproduction at the factory and cannot be changed.
can
If you press the SSM button after making appropriate
on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
:
adjustment
Sound
adjustment
You can adjust balance, AVL
AVL automatically keeps on
change
SSM
(Auto Volume Leveler).
an equal volume level
even
if you
programmes.
Sound
SSM
DEFG
1.
2.
3.
AVL
On
Balance
Off
OK
MENU
Press the MENU button and then
button to select the
/
Sound menu.
Press the
button and then
button to select the desired
/
sound item; AVL or Balance.
Make desired adjustment with the
/
and then press
/
,
the OK button.
4.
Press the TV button to return to normal TV
viewing.
19
Sound
adjustment
Stereo/Dual
When
reception
programme is selected, the sound information for the
station appears after the programme number and station name
a
disappear.
I/II
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II
button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the
Language
If
a
loudspeakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
When NICAM
FM MONO.
When NICAM
mono
is received, you
can
select NICAM MONO
or
2.
STEREO
FM
3.
or
stereo
is
received, you
FM MONO. If the stereo
can
signal
select
NICAM
is weak, switch to
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono
is selected the
display
MONO appears
on
the
screen.
Sound output selection
In AV mode, you
can
select
output sound for the left and right
loudspeakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loudspeaker
Repeatedly
L+R
:
and audio
L+L
R+R
20
:
:
signal from audio R input is sent to right
loudspeaker.
Audio signal from audio L input is sent to left and right
loudspeakers.
Audio signal from audio R input is sent to left and right
loudspeakers.
TIME Menu
Clock
ENGLISH
Time
Time
You must set the time
1.
using
Press the MENU button and then
TIME
2.
before
correctly
Off time
on/off time function.
/
On time
Auto off
button to select the
menu.
Press the
button and then
button to select TIME.
/
Time
DEFG
OK
MENU
-i-i:i-i-
Time
Off time
On time
Auto off
DEFG
OK
MENU
3.
Press the
button and then
4.
Press the
button and then
5.
Press the MENU button to
button to
/
button to
/
adjust the hour.
adjust the minute.
save.
MENU
On/Off time
The off timer
automatically
switches the set to
standby
at the
preset time.
1.
TIME
2.
PR
Press the MENU button and then
/
button to select the
menu.
Press the
OK
VOL
button and then
button to select Off time
/
or
VOL
PR
On time.
3.
Press the
button and then
To cancel On/Off time
button to select On.
/
function, press the
/
button to
select Off.
Time
Time
Off time
-i-i:i-i-
On time
Pr.
Auto off
0
Vol.
30
On
DEFG
OK
MENU
4.
Press the
button and then
5.
Press the
button and then
6.
Only
a.
b.
adjust the hour.
adjust the minute.
button and then
function; Press the
volume
level
and
adjust
programe number.
Press the MENU button to
Note
button to
On time
button to
7.
button to
/
/
/
save.
:
In the event of power interruption
failure), the clock must be reset.
(disconnection
Two hours after the set is switched
will
switch back to
automatically
pressed.
or
power
by the on time function it
standby mode unless a button
on
has been
c.
Once the
the
d.
off time is set, these functions
operate daily
Off Timer function overrides On Timer function if
the
e.
on or
at
preset time.
same
they are
set to
time.
The set must be in
standby
mode for the On Timer to work.
21
TIME Menu
Auto off
Time
Time
Off time
If you select On on the Auto off menu, the set will automatically
switch itself to standby mode approximately ten minutes after a TV
On time
Auto off
station
DEFG
1.
OK
MENU
stops broadcasting.
Press the MENU button and then
TIME
/
button to select the
menu.
2.
Press the
button and then
/
button to select Auto off.
3.
Press the
button and then
/
button to select On
or
Off.
Time
Time
Off time
On time
On
Auto off
Off
DEFG
MENU
4.
OK
VOL
VOL
PR
MENU
Press the MENU button to
Sleep
PR
OK
save.
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time has elapsed.
Press the SLEEP button to select the number of minutes.
The display
off' will appear on the screen, followed by 10, 20,
30, 60, 90, 120, 180 and 240. The timer begins to count down from
'
the number of minutes selected.
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the
until the
c.
SLEEP
22
sleep time, repeatedly
off' appears.
display
press the SLEEP button
'
When you switch the set off, the set releases the
time.
preset sleep
Other functions
TV,
AV and PC modes
ENGLISH
Setup
Language
Input
be set for TV, AV or PC mode. AV mode is used when a
Inputs
video cassette recorder (VCR), or other equipment is connected to
can
Child lock
Power indicator
the set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment'
section.
1.
Press the MENU button and then
Setup
/
DEFG
OK
MENU
button to select the
menu.
2.
Press the
3.
Press the
button and then
/
button and then
AV2, S-Video, Component
The AV and PC modes
or
button to select
/
PC.
Input.
button to select TV, AV1,
are :
TV
Setup
Language
Input
TV
Child lock
AV1
Power indicator
AV2
MENU
S-video
Component
PC
PR
DEFG
OK
MENU
AV 1
:
VCR connected to the Euro scart socket of the set.
AV 2
:
VCR connected to the AV2 of the set.
S-Video
:
OK
VOL
VCR connected to the S-Video of the set.
Component
:
VOL
PR
DVD/DTV connected to the COMPONENT sock-
ets on the back of set.
PC
:
PERSONAL COMPUTER connected to the PC socket of
the set.
4.
Press the TV button to return to normal TV
Auto AV
viewing.
switching
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV1 mode automatically. But
if you want to
buttons.
keep
on
watching
TV mode, press the NUMBER
or
TV
23
Other functions
Setup
Child lock
Language
Input
Child lock
The TV
Power indicator
control it. This feature
can
be set
that the remote control handset is needed to
so
can
be used to
prevent unauthorized view-
ing.
DEFG
OK
1.
MENU
Press the MENU button and then
Setup
2.
Press the
button and then
3.
Press the
button and then
on
/
button to select the
menu.
the Child lock
button to select Child lock.
/
button to select On
/
or
Off
menu.
Setup
Language
Input
Child lock
On
Power indicator
Off
TV
MENU
DEFG
4.
OK
VOL
PR
MENU
Press the TV button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the top panel is pressed while viewing the TV.
PR
VOL
OK
Note : The display Child lock on will not appear on the screen if
any button on the panel is pressed while displaying the menus.
Power indicator
Use this function to set the power indicator on the front side of the
product to On or Off. If you set On at any time, the power indicator
will automatically be turned on. Although you select Off, set front
light
1.
turns
on
for
a
moment when the set turns
Press the MENU button and then
Setup
button to select the
menu.
2.
Press the
3.
Press the
on
/
on.
button and then
/
button and then
the Power indicator
button to select Power indicator.
button to select On
/
menu.
Setup
Language
Input
Child lock
On
Power indicator
Off
DEFG
4.
24
OK
MENU
Press the TV button to return to normal TV
viewing.
or
Off
Teletext
-
ENGLISH
This feature is not available in all countries.
Teletext
(or
TOP
text)
is
an
optional function,
therefore
only
with the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which
up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
a
set
gives
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a
number of pages which are selected by directly entering the
corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
PR
reappears.
OK
SIMPLE text
Page selection
1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then
re-enter the correct page number.
2. The
button can be used to select the preceding or
/
following
PR
123
456
page.
colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M button to switch to LIST mode.
Programming
789
a
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to
0
TEXT
easily
3.
4.
programme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
INDEX
MODE
?
i
M
TOP text
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with
automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
button can be used.
Alternatively the
4. The red button permits to return to previous selection.
button can be used.
Alternatively the
25
Teletext
Direct page selection
Corresponding to the SIMPLE teletext mode, you
ber using the NUMBER buttons in TOP mode.
can
select
a
page
by entering
it
as a
three
digit
num-
FASTEXT
The teletext pages are colour coded
corresponding coloured button.
along
the bottom of the
selection
Press the
i button to select the index page.
You can select the pages which are colour coded
screen
and
are
selected
by pressing
the
Page
1.
2.
along
the bottom line with the
same
coloured but-
tons.
3.
4.
to the SIMPLE teletext mode, you can select a page by entering its three
number with the NUMBER buttons in FASTEXT mode.
The
button can be used to select the preceding or following page.
/
Corresponding
Special
?
digit
page
teletext functions
REVEAL
Press this button to display concealed information, such as solutions of riddles
Press this button again to remove the information from the display.
or
puzzles.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
UPDATE
Displays the
display
TV
on the screen while waiting for the new teletext page.
will appear at the top left hand corner of the screen. When the
is available then display
will change to the page number.
Press this button to view the updated teletext page.
picture
The
updated
page
HOLD
the automatic page change which will occur if a teletext page consists of 2 or more sub
pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below
the time. When this button is pressed the stop symbol is displayed at the top left-hand corner
of the screen and the automatic page change is inhibited.
To continue press this button again.
Stops
MIX
Displays the teletext pages superimposed on the TV
To switch the TV picture off press this button again.
picture.
TIME
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this
button to select a sub page number. The sub page number is displayed at the bottom of the
screen. To hold or change the sub page, press the NUMBER buttons.
Press again to exit this function.
26
Connection of external
You
connect additional equipment, such as
etc. to your set. Examples are shown as below.
can
equipment
ENGLISH
VCRs, camcorders
Aerial socket
PC INPUT
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket of
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Euro scart socket
1.
2.
75
ANTIN(
)
PC SOUND
H/P
S-VIDEO
AV2
VCR
(VCR)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
want to keep on watching in TV mode, press the TV or NUMBER
buttons.
PC INPUT
A
AV1
AV2
Otherwise press the INPUT button on the remote control
handset to select AV1. The VCR play back picture appears
the screen.
You
can
also record programmes received
by
the TV
on
on
video
VCR
tape.
Note
a.
b.
C.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart and the AV 1 can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
If the S-VHS signal is received through the S-VIDEO, you must
change to the S-Video mode.
Please use shielded scart cable.
Signal type RGB,
S-Video/Audio in sockets
When
connecting
picture quality will
1.
an
(S-Video)
PC INPUT
S-VIDEO VCR to the S-VIDEO socket, the
be further
ANTIN(
75
)
PC SOUND
H/P
AV2
S-VIDEO
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket
of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
S-VIDEO VCR
sockets of the set.
3.
4.
Press the INPUT button to select S-video.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
27
Connection of external
Euro scart socket
PC INPUT
(DVD)
ANT IN
AV1
1.
S-V
AV2
2.
3.
DVD
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
Press the INPUT button to select AV1.
Press the PLAY button on the DVD.
The DVD playback picture appears on the
DVD
COMPONENT
1.
VIDEO
input
screen.
sockets
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
Y PB PR) of the DVD to the COMPONENT/VIDEO sockets (Y
or
PB
L
AUDIO
equipment
R
DVD
PR)
of the set.
2.
Connect the audio cable from the DVD to COMPONENT/
3.
AUDIO sockets of the set.
Press the INPUT button to select
4.
Component.
Press the PLAY button on the DVD.
The DVD playback picture appears on the
screen.
DTV in sockets
COMPONENT
1.
VIDEO
2.
Connect the audio cable from the SET TOP to COMPONENT/
3.
AUDIO sockets of the set.
Press the INPUT button to select
L
AUDIO
R
DTV Reciever
2.
3.
ANTIN(
75
)
VCR
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the INPUT button to select AV2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
PC SOUND
H/P
S-VIDEO
AV2
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Headphone
Insert the
can
PC INPUT
ANTIN(
75
)
PC SOUND
H/P
AV2
28
S-VIDEO
Component.
Audio/Video in sockets
1.
PC INPUT
Connect the SET TOP outputs to the COMPONENT/VIDEO
sockets (Y PB PR) on the set.
socket
headphone plug to the headphone socket of the set. You
through the headphone. To adjust the head-
listen to the sound
button. If you press the MUTE but/
press the
the
sound
from
the
ton,
headphone is switched off.
phone volume,
Connection of PC
ENGLISH
PC in socket
1.
2.
3.
4.
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND
sockets of the set.
Press the INPUT button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
PC INPUT
ANTIN(
75
)
PC SOUND
H/P
AV2
S-VIDEO
PERSONAL COMPUTER
Displayable
MODE
Monitor
Specification
Horizontal
Resolution
Vertical
Frequency(kHz) Frequency(Hz)
VGA
640x480
31.4
60
SVGA
800x600
37.8
60
XGA
1024x768
48.3
60
WXGA
1280x768
47.7
60
WXGA
1360x768
47.6
60
form
(Synchronization input
Note
a.
b.
c.
:
separate)
:
If the set is cold, there may be
a
small "flicker" when the set is switched
on.
This is normal, there is
nothing wrong with the set.
If possible, use the 1360x768@60Hz
video mode to obtain the best image quality for your LCD
monitor. If used under the other resolutions, some scaled or processed pictures may appear on the
screen. The set has been pre-adjusted to the mode VESA 1360x768@60Hz.
Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have
impact or effect on the monitor performance.
Do not press the LCD screen with your finger for a long time as this may produce some temporary
no
d.
distortion effects
e.
When the PC
will differ
f.
on
the
according
message finishes.
If the message "out of
Specification' section.
DPM
(Display
screen.
appears on the set, a message may appear on the screen, and the message
to the Window system version. If a message appears click "Next" until the
screen
Power
range"
Management)
When the PC is in the power
energy.
Note : Use the
appears
on
the screen,
the PC
as
in the
'Displayable
Monitor
mode
saving mode, automatically
supplied signal
adjust
the monitor goes into DPM mode to
save
the
cable with the set. Otherwise, DPM mode may not work.
29
Connection of PC
PC
PC
Setup
You
can
H-Position
V-Position
adjust horizontal/vertical position, clock, phase,
configure, reset as you prefer.
Clock
Phase
Auto
Configure
Reset
DEFG
OK
and auto-
1.
Press the MENU button and then
Setup
MENU
button to select the
/
menu.
2.
Press the
button and then
button to select
3.
Press the
button and then
button to select PC.
4.
/
/
Press the MENU button and then
/
Input.
button to select the PC
menu.
PC
87
H-Position
V-Position
Clock
Phase
INPUT
Auto
Configure
Reset
MENU
DEFG
5.
Press the
picture
6.
PR
OK
VOL
OK
MENU
button and then
Press the
/
button to make
H-Position / V-Position
This function is to adjust
VOL
PR
button to select the desired
/
item.
picture
appropriate adjustments.
to
left/right
and
up/down
as
you
prefer.
Clock
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and phase. The displayed image will disappear for
few seconds while the
Auto-configuration
a
is in progress.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually.
7.
30
Press the OK button to store it for the PC monitor
picture.
T roubleshooting Checklist
Checklist
The
?
doesn't work
Power is
suddenly
Check to
control
The remote control
does not work
operation
see
if there is any
obstruction.
object
normally.
between the
product
Are batteries installed with correct
?
Correct remote
?
Install
new
?
Is the
sleep
?
Check the power control settings. Power interrupted
No broadcast on station tuned with Auto off activated.
?
and the remote
causing
?
turned off
ENGLISH
operating
polarity (+
mode set:
to +,
-
to
-)?
TV, VCR etc.?
batteries.
timer set?
The video function does not work.
No
picture
&
No sound
Check whether the
?
Try
?
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
?
Picture appears
slowly after
switching
?
Test the wall power outlet, plug another product's power cord into the outlet
where the product's power cord was plugged in.
?
This is
on
or
poor color
poor
picture
normal, the image is muted during the product startup process.
Please contact your service center, if the
minutes.
?
or
with the broadcast.
?
?
No
product is turned on.
problem may be
another channel. The
?
?
?
has not
picture
appeared
after five
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
ture
Poor
reception
some
Lines
in
picshaking
on
channels
or
?
Check for local interference such
?
Station
?
Station
?
Check for
?
Check antenna
or
streaks
pictures
or
cable
signal
is
as an
electrical
product experiencing problems,
weak, reorient
sources
of
possible
(Change
appliance
or
power tool.
tune to another station.
antenna to receive weaker station.
interference.
the direction of the
antenna).
31
The audio function does not work.
No
?
Press the VOL
Picture OK &
?
Sound muted? Press MUTE button.
No sound
?
Try
?
Are the audio cables installed
?
Adjust
?
A
output from
of the
one
another channel. The
Balance in
problem may be
properly?
with the broadcast.
option.
menu
speakers
Unusual sound
from inside the
change
in ambient
noise when the
product
the
humidity or temperature may result in an unusual
product is turned on or off and does not indicate a fault with
product.
There is
a
(Only
?
The
button.
(or Volume)
signal
is out of
?
range.
Vertical bar
in PC mode.
problem
PC mode
applied)
Adjust resolution, horizontal frequency,
Check the input source.
or
vertical
frequency.
or
stripe on background &
?
Work the Auto
?
Check the
?
Reinstall the PC video card.
configure
or
adjust clock, phase,
or
H/V
position.
Horizontal Noise &
Incorrect
position
Screen color is
unstable
or
single
signal
cable.
color
Product
Power
Specifications
Requirement/
Consumption
Power
Dimensions
AC100-240V~50/60Hz 1.1A
100W
including
stand
(Width x Height x Depth)
Weight
Television
611.6mm x 485.2mm x 275.6mm
24.0inches x 18.0inches x 10.8inches
611.6mm x 450.1mm x 111.5mm
24.0inches x 17.7inches x 4.3inches
excluding
stand
including
stand
10.9kg (24.0lbs)
excluding
stand
9.2kg (20.2lbs)
PAL/SECAM
System
Programme Coverage
VHF: E2
External Antenna
75Ω
*
The
Impedance
specifications
shown above may be
B/G/D/K, PAL I/II, SECAM L/L'
E12, UHF: E21
~
changed
without
prior
E69, CATV: S1
~
notice for
S20, HYPER: S21
~
quality improvement.
S41
~
Download PDF

advertising