LG | 29LN470U | LG 29LN470U Owner’s Manual

Printing Specification
Drawn
Checked
Approved
Signature
SH JO
SUIN KIM
Jongok.kim
MMM/DD/YYYY
Mar/12/2013
Mar/12/2013
Mar/12/2013
1. Model Description
Model name
:
26LN460U-ZJ
Brand name
:
LG
Part number
2nd, 3rd Suffix
:
EK
Product name
:
26LN460U-ZJ
(Revision number)
:
MFL67861606
(1310-REV02)
2. Printing Specification
1. Trim size (Format)
:
182 mm x 257 mm (B5)
• Cover
:
1 Color (Black)
• Inside
:
1 Color (Black)
• Cover
:
Uncoted, wood-free paper 60 g/㎡
• Inside
:
Uncoted, wood-free paper 60 g/㎡
4. Bindery
:
Saddle stitching
5. Language
:
ENG (1)
6. Number of pages
:
36
2. Printing colors
3. Stock (Paper)
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
O
T
E
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK :
Printed in Kazakhstan
LGEKR :
Printed in Korea
LGERS :
Printed in Mexico
LGEAZ
:
Printed in Brazil
LGEMA :
Printed in Poland
LGESY :
Printed in China
LGEEG :
Printed in Egypt
LGEMX :
Printed in Mexico
LGETH :
Printed in Thailand
LGEIL
:
Printed in India
LGEND :
Printed in China
LGEVN :
Printed in Vietnam
LGEIN
:
Printed in Indonesia
LGERA :
Printed in Russia
LGEWR :
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number
Oct/28/2013
Sungho Jo
EKLDA01451
[LD33Q] Manual drawing update
Jul/22/2013
Sungho Jo
EKLD701613
Added the text for USB port on the B/C
Signature
ECO Number
MMM/DD/YYYY
Change Contents
Pagination sheet
Part number
:
MFL67861606
Total pages
:
36 pages
Front
Back
(ENG)
Cover
P/No.
2
…
32
Blank
Blank
Blank
(ENG)
OWNER’S MANUAL
*
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LN46**
LN47**
P/NO : MFL67861606(1310-REV02)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
29
MAINTENANCE
3
OPEN SOURCE SOFTWARE NOTICE
29
29
29
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
3
EXTERNAL CONTROL DEVICE
SETUP
29
TROUBLESHOOTING
4
SAFETY INSTRUCTIONS
30
SPECIFICATIONS
10
INSTALLATION PROCEDURE
10
ASSEMBLING AND PREPARING
10
12
13
14
15
15
15
16
17
18
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
- Detaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
19
MAKING CONNECTIONS
19
19
20
20
21
21
22
22
23
24
24
25
25
Antenna connectionl
Satellite dish connection
Adapter connection
HDMI connection
- ARC (Audio Return Channel)
DVI to HDMI connection
MHL connection
Component connection
Composite connection
Euro Scart connection
USB connection
CI module connection
Headphone connection
27
REMOTE CONTROL
28
USING THE USER GUIDE
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
3
LICENSES
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that has
passed rigorous testing to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered
trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
ENGLISH
ENG
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yy Do not place the TV and/or remote control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yy Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.
This plug must remain readily attached and operable when TV is in use.
yy Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yy Make sure to connect Mains cable to compliant AC mains socket with Grounded
earth pin. (Except for devices which are not grounded on earth.) Otherwise
possibility you may be electrocuted or injured.
yy Insert power cable plug completely into wall socket otherwise if not secured
completely into socket, fire ignition may break out.
yy Ensure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.
yy Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
yy Bend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
yy When mounting TV onto wall make sure to neatly install and isolate cabling from
rear of TV as to not create possibility of electric shock /fire hazard.
SAFETY INSTRUCTIONS
yy Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
yy Keep the anti-moisture packing material or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
yy Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yy Dispose of used batteries carefully to ensure that a small child does not consume
them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
yy Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.
You may be electrocuted.(Depending on model)
y
y Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
yy Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
yy Do not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.
yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop
anything onto the screen.
You may be injured or the product can be damaged.
yy Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
yy Never touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
yy Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
yy Do not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
yy If any of the following occur, unplug the product immediately and contact your local
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
yy Unplug the TV from AC mains wall socket if you do not intend to use the TV for a
long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause
electric leakage/shock/fire.
yy Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
yy Install the product where no radio wave occurs.
yy There should be enough distance between an outside antenna and power lines to
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yy Do not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
yy If you install the TV on a stand, you need to take actions to prevent the product
from overturning. Otherwise, the product may fall over, which may cause injury.
yy If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
yy Only use the attachments / accessories specified by the manufacturer.
yy When installing the antenna, consult with a qualified service technician. If not
installed by a qualified technician, this may create a fire hazard or an electric shock
hazard.
yy We recommend that you maintain a distance of at least 2 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yy Only use the specified type of battery.
This could cause damage to the remote control.
yy Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yy Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight ,
open fireplace and electric heaters .
yy Do not place non-rechargeable batteries in charging device.
yy Make sure there are no objects between the remote control and its sensor.
yy Signal from remote control can be interrupted due to external/internal lighting eg
sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
yy When connecting external devices such as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
yy Please follow the installation instructions below to prevent the product from
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
yy Take care not to touch the ventilation openings when watching the TV for long
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
yy Periodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
yy Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
yy Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
yy Do not press strongly upon the panel with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it, as it may cause damage to screen.
yy Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary or permanent distortion/damage to
screen.
yy When cleaning the product and its components, unplug the power first and wipe it
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
yy As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yy When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power cord from the power board, as this could
be hazardous.
yy When moving the product, make sure you turn the power off first. Then, unplug the
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
yy Contact the service centre once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
yy Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
yy If the product feels cold to the touch, there may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong with product.
yy The panel is a high technology product with resolution of two million to six million
pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
yy You may find different brightness and colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
yy Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yy Generated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
yy When moving or unpacking the product, work in pairs because the product is
heavy.
Otherwise, this may result in injury.
9
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Remote control,
batteries (AAA)
(See p. 27)
Owner’s manual
Cable holder
(See p. 18)
Power Cord
(See p. 20)
AC-DC Adaptor
(See p. 20)
Component video cable
(See p. 22)
Composite video cable
(See p. 22, 23)
Stand Base
(See p. 15)
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
123
P
AN-MR400
Magic Remote
AN-VC4**
Video call camera
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
Screen
Speakers
Remote Control Sensor
Touch Buttons1
Touch Buttons
H
Description
Scrolls through the saved programmes.
Adjusts the volume level.
H
13
OK ꔉ
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menu, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
1 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ASSEMBLING AND PREPARING
Image shown may differ from your TV.
Detaching the Stand
Attaching the stand
1
1
Stand Base
Stand Base
2
2
CAUTION
yy When attaching the stand to the TV, place
the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
NOTE
yy When Detaching the stand from TV, Detach
the stand with lifting up the lever in the
direction of the arrow.
ENGLISH
ENG
Setting up the TV
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Securing the TV to a wall
(This feature is not available for all models.)
10 cm
10 cm
m
10 c
10 cm
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
(Depending on model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
26/29LN46**
29LN47**
100 x 100
M4
4
LSW130B
ENGLISH
ENG
Using the Kensington security system
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
A
B
Tidying cables
Gather and bind the cables with the cable holder.
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
MAKING CONNECTIONS
Satellite dish connection
(Only satellite models)
yy This section on MAKING CONNECTIONS
mainly uses diagrams for the LN46** models.
Antenna connection
ANTENNA/
CABLE IN
13/18 V
700 mA Max
LNB IN
Satellite
ANTENNA
/CABLE IN
(*Not
Provided)
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio:
MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC.
(*Not Provided)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
ENGLISH
ENG
MAKING
CONNECTIONS
19
20 MAKING CONNECTIONS
ENGLISH
ENG
Adapter connection
HDMI connection
DC-IN
AC-DC Adapter
2(ARC)
1(MHL)
1 Connect the DC adapter plug to the power
input jack on the TV.
2 Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
(*Not
Provided)
CAUTION
yy Please be sure to connect the TV to the ACDC power adapter before connecting the
TV’s power plug to a wall power outlet.
HDMI
DVD/ Blu-Ray
/ HD Cable Box
/ PC
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby
Digital, DTS, PCM (Up to 192 KHz, 32 KHz/44.1
KHz/48 KHz/88 KHz/96 KHz/176 KHz/192 KHz)
21
MAKING CONNECTIONS
DVI to HDMI connection
(PC)
ENGLISH
ENG
ARC (Audio Return Channel)
yy An external audio device that supports
SIMPLINK and ARC must be connected
using HDMI IN 2 (ARC) port.
yy When connected with a high-speed
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
2(ARC)
1(MHL)
(*Not
Provided)
(*Not
Provided)
DVI
AUDIO
DVD/ Blu-Ray / HD Cable Box / PC
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the HDMI to DVI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
NOTE
yy Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in
use.
yy When using the HDMI/DVI cable, only Single
link is supported.
22 MAKING CONNECTIONS
(MHL)
ENGLISH
ENG
Component connection
MHL connection
COMPONENT IN
AV2 IN /
AUDIO L R
2(ARC)
1(MHL)
MHL passive cable
(*Not Provided)
(Use the
composite
video cable
provided.)
(Use the
component
video cable
provided.)
Mobile phone
RED
BLUE
RED
RED
BLUE
(*Not
Provided)
GREEN GREEN
RED
WHITE
(*Not
Provided)
R
AUDIO
VIDEO
DVD / Blu-Ray / HD Cable Box
GREEN
BLUE
RED
L
RED
WHITE
yy The MHL passive cable is needed to connect
the TV and a mobile phone.
yy This only works for the MHL-enabled phone.
yy Some applications can be operated by the
remote control.
yy Remove the MHL passive cable from the TV when:
- The MHL function is disabled.
- Your mobile device is fully charged in standby mode.
WHITE
NOTE
YELLOW
Mobile High-definition Link (MHL) is an interface for
transmitting digital audiovisual signals from mobile
phones to television sets.
MAKING CONNECTIONS
Composite connection
ENGLISH
ENG
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
23
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
COMPONENT IN
AV2 IN /
AUDIO L R
(Use the composite
video cable provided.)
RED
WHITE
YELLOW
(*Not
Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
DVD / Blu-Ray / HD Cable Box / VCR
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th composite cable as
shown.
L
24 MAKING CONNECTIONS
ENGLISH
ENG
Euro Scart connection
USB connection
(HDD IN)
(*Not Provided)
USB Hub
USB
(*Not Provided) (*Not Provided)
HDD
(*Not Provided)
AUDIO / VIDEO
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown.
Current
input mode
Digital TV
Output
Type
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
NOTE
yy Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB IN port on
the TV directly.
yy Connect the external power source if your
USB is needed.
MAKING CONNECTIONS
PCMCIA
CARD SLOT
Headphone connection
(*Not Provided)
(*Not Provided)
PCMCIA
CARD SLOT
Transmits the headphone signal from the TV to an
external device. Connect the external device and
the TV with the headphone as shown.
NOTE
View the encrypted (pay) services in digital TV
mode. This feature is not available in all countries.
NOTE
yy Check if the CI module is inserted into the
PCMCIA card slot in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
yy If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Terrestrial/Cable/Satellite
Service Operator.
yy AUDIO menu items are disabled when
connecting a headphone.
yy Headphone impedance: 16
yy Max audio output of headphone: 9 mW to
15 mW
yy Headphone jack size: 0.35 cm
ENGLISH
ENG
CI module connection
25
26 MAKING CONNECTIONS
ENGLISH
ENG
Connect various external devices to the TV
and switch input modes to select an external
device. For more information on external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
REMOTE CONTROL
27
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
AD/PIP
Make sure to point the remote control toward the remote control sensor on the TV.
TV /
RAD
RATIO
SUBTITLE
INPUT
Q.MENU GUIDE
1
4
7
LIST
2
5
8
0
3
6
9
Q.VIEW
FAV
MUTE
1
TEXT
INFO
T.OPT
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Accesses the Quick menus.
GUIDE Shows programme guide.
RATIO Resizes an image.
Changes the input source.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
APP/* Select the MHP TV menu source. (Only Italy.)
(Depending on model)
MUTE
Mutes all sounds.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
TELETEXT buttons These buttons are used for teletext.
Views the information of the current programme and
screen.
SMART Accesses the Smart Home menus.
EXIT
LIVE TV
Time Machine
SETTINGS
2
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and return to TV viewing.
Accesses the main menus.
REC
Start to record and display record menu.
LIVE TV Return to LIVE TV.
Control buttons (
) Controls the Premium contents,
Time Machine or Smart Share menus or the SIMPLINK compatible devices (USB or SIMPLINK or Time Machine).
Coloured buttons These access special functions in some
menus. (
Red
Green
Yellow
Blue)
ENGLISH
ENG
REMOTE CONTROL
28 USING THE USER GUIDE
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the
SMART button to access the
Smart Home menu.
2 Select User Guide and press OK.
OPTION > To set language
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
More
More
1
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Try Now
2
Close
More
Index
On line User Guide
User Guide

User Guide
User Guide Check with your remote control right now.
3
1
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
To set language
OPTION
To set country
LG SMART Function
Disabled Assisstance
Advanced Function
Information
2
To set Magic remote control
Index
4
Image shown may differ from your TV.
Online User Guide
5
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
4
Allows to browse the description of the
function you want from the index.
5
Provides the detailed information on the
functions of LG Smart TV when the Internet
is connected.
(It may not be available depending on the
country/language.)
1
Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2
Moves to the selected menu directly from the
User Guide.
MAINTENANCE / TROUBLESHOOTING
29
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
yy Check if the batteries are still working and properly installed ( to , to ).
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting to
the PC (HDMI), ‘No
signal’ or ‘Invalid
Format’ is displayed.
yy
Turn the TV off/on using the remote control.
yy
Reconnect the HDMI cable.
yy
Restart the PC with the TV on.
30 SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
802.11a: 11 dBm
Output Power
(Max.)
802.11b: 14 dBm
802.11g: 10.5 dBm
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
SPECIFICATIONS
31
26LN46**
29LN46**
26LN4607-ZJ
26LN460R-ZJ
26LN460U-ZJ
26LN467U-ZK
26LN4677-ZK
26LN467R-ZK
29LN4607-ZJ
29LN460R-ZJ
29LN460U-ZJ
29LN467U-ZK
29LN4677-ZK
29LN467R-ZK
With stand (mm)
621 x 431 x 162
669 x 456 x 182
Without stand (mm)
621 x 386 x 72.9
669 x 411 x 82
4.5
6.0
MODELS
Dimensions
(W x H x D)
Weight
With stand (kg)
Without stand (kg)
4.2
Power Consumption(Typical)
Power requirement
5.6
39 W
19 V
40 W
19 V
Manufacturer : LG Innotek
Model : PSAB-L206A
29LN47**
AC/DC Adapter
29LN470R-ZB
29LN4707-ZB
29LN470U-ZB
MODELS
With stand (mm)
Without stand (mm)
With stand (kg)
Weight
Without stand (kg)
Power Consumption(Typical)
Power requirement
669 x 456 x 182
669 x 411 x 82
6.0
5.6
40 W
19 V
Manufacturer : LG Innotek
Model : PSAB-L206A
Dimensions
(W x H x D)
AC/DC Adapter
CI Module Size(W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
Environment
condition
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
Analogue TV
Television system
DVB-T(*DVB-T/T2)
DVB-C
DVB-S/S2
PAL/SECAM B/G/I/D/K
SECAM L/L’
Programme coverage
VHF, UHF
C-Band, Ku-Band
VHF: E2 to E12, UHF : E21 to E69,
CATV: S1 to S20, HYPER: S21 to S47
Maximum number of
storable programmes
DVB-S/S2 : 6,000
DVB-T/T2/C & Analogue TV : 1,500
External antenna impedance 75 Ω
* : Only DVB-T2 support model
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
32 SPECIFICATIONS
ENGLISH
ENG
HDMI-DTV supported mode
HDMI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
1152 x 864
1360 x 768
31.468
31.469
31.469
37.879
48.363
54.348
47.712
70.09
70.08
59.94
60.31
60.00
60.053
60.015
1920X1080
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
480i/576i
480p/576p
720p/1080i
1080p
O
O
O
O
(50 Hz / 60 Hz only)
Horizontal
Vertical
Frequency
Frequency
(kHz)
(Hz)
31.469 / 31.50 59.94 / 60.00
31.469 / 31.50 59.94 / 60.00
31.25
50.00
15.625
50.00
37.50
50.00
44.96 / 45.00
59.94 / 60.00
33.72 / 33.75
59.94 / 60.00
28.125
25.00 / 50.00
26.97 / 27.00
23.97 / 24.00
33.716 / 33.75 29.976 / 30.00
56.25
50.00
67.43 / 67.50
59.94 / 60.00
NOTE
Component ports on
the TV
Component
640X480
720X480
720X576
1280X720
Component port connecting information
Signal
Resolution
yy The optimal display resolution is
1360 X 768@60Hz.
yy The optimal timing in each mode is vertical
frequency 60Hz.
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Country
Service
0900 543 5454
015 200 255
800 187 40
0032 15 200 255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
3220
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
902 500 234
54
01806 11 54 11
(0,20€ pro Anruf
aus dem Festnetz
der DTAG; Mobilfunk:
max. 0,60€ pro
Anruf)
MODEL
SERIAL
Latvija
Service
0 810 144 131
0770 54 54 54
0848 543 543
801 11 200 900,
210 4800 564
0844 847 5454
06 40 54 54 54
800 9990
0818 27 6955
0 800 303 000
199600099
8 820 0071 1111
8 8000 805 805,
2255(GSM)
80200201
8 800 120 2222
880008081
8 0000 710 005
8 800 200 7676
Download PDF

advertising