LG | 42LF652V | LG 42LF652V Owner’s Manual

Safety and Reference
Please read this manual carefully before operating your
set and retain it for future reference.
P/NO : MFL68702218 (1502-REV00)
Printed in Korea
Please read these safety precautions carefully before
using the product.
D! "#!$
t A location exposed to direct sunlight
t An area with high humidity such as a bathroom
t Near any heat source such as stoves and other devices that
produce heat
t Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil
t An area exposed to rain or wind
t Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product
M.e sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on
earth.) Otherwise possibility you may be electrocuted or injured.
I(t power cable plug completely into wall socket otherwise if not
secured completely into socket, fire ignition may break out.
such as a heater. This may cause a fire or an electric shock hazard.
Otherwise, this may result in fire or electric shock.
D%#! !$&'(%() !( *
cause a fire hazard.
B& &#!(!%(!&%!!$0
rain from flowing in. This may cause water damaged inside the Product
and could give an electric shock.
M!(+%$!( TV connecting/disconnecting device to AC mains
electric supply. This plug must remain readily attached and operable
when TV is in use.
cabling from rear of TV as to not create possibility of electric shock /
fire hazard.
D%#%$#!#(),!!*-!" pin is wet or covered with dust, dry the power plug completely or wipe
dust off. You may be electrocuted due to excess moisture.
D%! "0#!$'
devices. Otherwise, this may result in injury or damage to the product.
D%(!5& (%&((%)!( ENGLISH
D%$*!0!(!(!$ %! !
outlet. Otherwise, this may result in fire due to over-heating.
danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
D! &/((%(!(-! !(-(!.(#!
into the product, or inflammable objects such as paper and matches.
Children must pay particular attention. Electrical shock, fire or injury
can occur. If a foreign object is dropped into the product, unplug the
power cord and contact the service centre.
reach of children. Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep it out
of the reach of children.
substance (thinner or benzene). Fire or electric shock accident can
Otherwise, the TV may fall over, which may cause serious injury.
D#*!-(.*&/(" !%!-
and do not drop anything onto the screen. You may be injured or the
product can be damaged.
consume them. Please seek Doctor- Medical Attention immediately if
child consumes batteries.
N0%!( %%!$%!$!$()
You may be electrocuted.
cutlery/screwdriver) between power cable plug and input Wall Socket
while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging into the wall input
terminal. You may be electrocuted. (Depending on model)
N0%#%#!( .$"$(-
windows and ventilate. It may cause a fire or a burn by a spark.
D!(((&-! !"*%*%#
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
I"y of the following occur, unplug the product immediately and
contact your local service centre.
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction or product deformation.
N0D!(((& ,8#)
This may result in fire or electric shock.
t The product has been impacted by shock
t The product has been damaged
t Foreign objects have entered the product
t The product produced smoke or a strange smell
This may result in fire or electric shock.
I(oduct where no radio wave occurs.
U%$ TV from AC mains wall socket if you do not intend to use the
TV for a long period of time. Accumulated dust can cause fire hazard
and insulation deterioration can cause electric leakage/shock/fire.
power lines to keep the former from touching the latter even when the
antenna falls. This may cause an electric shock.
filled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
I"#ater or another substance enters the product (like a AC adapter,
power cord, TV), disconnect the power cord and contact the service
centre immediately. Otherwise, this may result in fire or electric shock.
D!( %((%(%(& (0(!!
surfaces. Also avoid places where there is vibration or where the
product cannot be fully supported. Otherwise, the product may fall or
flip over, which may cause injury or damage to the product.
ou install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), fix
it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
W!(!$-(% #!>%!?(0!
sure the connecting cables are long enough. Otherwise, the product
may fall over, which may cause injury or damage the product.
technician. If not installed by a qualified technician, this may create a
fire hazard or an electric shock hazard.
D%%OOG&*%$$!$1! %%$$!$#
W*%!! !("(@A!(
plug to the wall outlet. (Do not use the power plug for switch.) It may
cause mechanical failure or could give an electric shock.
the diagonal screen size when watching TV. If you watch TV for a long
period of time, this may cause blurred vision.
+("ollow the installation instructions below to prevent the product
O*%((!?*"&*) !( %%($
remote control.
D!' #&!(#!&!()!( *%(
from overheating.
t The distance between the product and the wall should be more
than 10 cm.
t Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
t Do not install the product on a carpet or cushion.
t Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
batteries to overheat and leak.
Batteries should not be exposed to excessive heat. For example, keep
away from direct Sunlight , open fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.
M.e sure there are no objects between the remote control and its
for long periods as the ventilation openings may become hot. This does
not affect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
C!$"F8&!%%'! +0%(!$#%$!(%)!( *%(
lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting
or darken viewing area.
a fire hazard.
W0!$%.!$%-#.! !(&%(
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the cord
exits the appliance.
as nail, pencil or pen, or make a scratch on it, as it may cause damage
to screen.
,0! %!$(!$*%?$4(J$!(! "$
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
first and wipe it with a soft cloth. Applying excessive force may cause
scratches or discolouration. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,
benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage
(deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this unit
the plug.
Don’t pull at the cord to unplug the power cord from the power board,
as this could be hazardous.
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.
product is heavy. Otherwise, this may result in injury.
Accumulated dust can cause mechanical failure.
F"er all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
I"oduct feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
!( !$$*!(*#!(%!"#!!
to eight million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does not affect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
Viewing 3D imaging (Only 3D
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
* LG LED TVs are LCD TVs with LED backlighting.
Viewing environment
t Viewing Time
- When watching 3D contents, take 5 - 15 minute breaks every
hour. Viewing 3D contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or
chronic illness
D!(*!$(! !$4)$)-&(!$ $-1(
menu, scene from a video game) for a prolonged time may cause
damage to the screen, resulting in retention of the image, which is
known as image sticking. The warranty does not cover the product for
image sticking.
Avoid displaying a fixed image on your television’s screen for a
prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking
may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
Generated sound
“Cracking” noise: A cracking noise that occurs when watching or turning
off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
t Some users may experience a seizure or other abnormal symptoms
when they are exposed to a flashing light or particular pattern
from 3D contents.
t Do not watch 3D videos if you feel nausea, are pregnant and/ or
have a chronic illness such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
t 3D Contents are not recommended to those who suffer from stereo
blindness or stereo anomaly. Double images or discomfort in
viewing may be experienced.
t If you have strabismus (cross-eyed), amblyopia (weak eyesight) or
astigmatism, you may have trouble sensing depth and easily feel
fatigue due to double images. It is advised to take frequent breaks
than the average adult.
t If your eyesight varies between your right and left eye, correct your
eyesight prior to watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
t Do not watch 3D contents when you feel fatigue from lack of sleep,
overwork or drinking.
t When these symptoms are experienced, stop using/watching 3D
contents and get enough rest until the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms
may include headache, eyeball pain, dizziness, nausea,
palpitation, blurriness, discomfort, double image, visual
inconvenience or fatigue.
This generated sound does not affect the performance and reliability
of the product.
Do not use high voltage electrical goods near the TV(e.g. electric
mosquito-swatter). This may result in product malfunction.
Viewing environment
t Viewing Distance
- Maintain a distance of at least twice the screen diagonal
length when watching 3D contents. If you feel discomfort in
viewing 3D contents, move further away from the TV.
Viewing age
t Infants/Children
- Usage/ Viewing 3D contents for children under the age of 6
are prohibited.
- Children under the age of 10 may overreact and become
overly excited because their vision is in development (for
example: trying to touch the screen or trying to jump into it.
Special monitoring and extra attention is required for children
watching 3D contents.
- Children have greater binocular disparity of 3D presentations
than adults because the distance between the eyes is
shorter than that of adults. Therefore they will perceive more
stereoscopic depth compared to adults for the same 3D
t Teenagers
- Teenagers under the age of 19 may react with sensitivity
due to stimulation from light in 3D contents. Advise them
to refrain from watching 3D contents for a long time when
they are tired.
t Elderly
- The elderly may perceive less 3D effect compared to the
young. Do not sit closer to the TV than the recommended
t If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
t Image shown may differ from your TV.
t Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
t The available menus and options may differ from the input source
or product model that you are using.
t New features may be added to this TV in the future.
t The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be
watched for some time, as this will reduce energy consumption.
t The energy consumed during use can be significantly reduced if the
level of brightness of the picture is reduced, and this will reduce
the overall running cost.
t The items supplied with your product may vary depending on the
t Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
t For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
Cautions when using the 3D glasses
t Make sure to use LG 3D glasses. Otherwise, you may not be able to
view 3D videos properly.
t Do not use 3D glasses instead of your normal glasses, sunglasses or
protective goggles.
t Using modified 3D glasses may cause eye strain or image
t Do not keep your 3D glasses in extremely high or low
temperatures. It will cause deformation.
t The 3D glasses are fragile and are easily scratched. Always use a
soft, clean piece of cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
*A <
*B <
t Use a certified cable with the HDMI logo attached.
t If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
- High-Speed HDMI®/TM Cable (3m or less)
- High-Speed HDMI®/TM Cable with Ethernet (3m or less)
t Do not use any unapproved items to ensure the safety and product
life span.
t Any damage or injuries caused by using unapproved items are not
covered by the warranty.
t Some models have a thin film attached on to the screen and this
must not be removed.
Lifting and moving the TV
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
(Depending on model)
Cinema 3D Glasses
Dual Play Glasses
Magic Remote
Smart Camera
Separate purchase
t It is recommended to move the TV in the box or packing material
that the TV originally came in.
t Before moving or lifting the TV, disconnect the power cord and
all cables.
t When holding the TV, the screen should face away from you to
avoid damage.
LG Audio Device
^ Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the
product lifespan.
t Make sure to turn the power off and disconnect the power cord and
all other cables first.
t When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
^ When transporting a large TV, there should be at least 2 people.
t When transporting the TV by hand, hold the TV as shown in the
following illustration.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
t Avoid touching the screen at all times, as this may result in damage
to the screen.
t Do not push, rub, or hit the screen surface with your fingernail or a
sharp object, as this may result in scratches and image distortions.
t Do not use any chemicals as this may damage the product.
t Do not spray liquid onto the surface. If water enters the TV, it may
result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
^ When transporting the TV, do not expose the TV to jolts or
excessive vibration.
t When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
t Do not apply excessive pressure to cause flexing /bending of frame
chassis as it may damage screen.
t When handling the TV, be careful not to damage the protruding
joystick button.
t Avoid touching the screen at all times, as this may result in damage
to the screen.
t Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.
ab c d
e f
You can simply operate the TV functions, pressing or moving the joystick
button up, down, left or right.
Mounting on a table
(Depending on model)
1 Lift and tilt the TV into its upright position on a table.
t Leave a 10 cm (minimum) space from the wall for proper
Joystick Button
qr st
10 cm
10 cm
10 cm
10 cm
ghijk lmnkojpni
2 Connect the power cord to a wall outlet.
When the TV is turned off, place your
finger on the joystick button and
press it once and release it.
When the TV is turned on, place
your finger on the joystick button
and press it once for a few seconds
and release it. All running apps will
close, and any recording in progress
will stop.
If you place your finger over the
joystick button and move it left or
right, you can adjust the volume level
you want.
If you place your finger over the
joystick button and move it up or
down, you can scrolls through the
saved programmes you want.
t Do not place the TV near or on sources of heat, as this may result in
fire or other damage.
Using the kensington security
(This is not available for all models.)
t Image shown may differ from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
Adjusting the menu
When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
Turns the power off.
Clears on-screen displays and returns to TV viewing.
t When your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button first, you may not be able to adjust the
volume level and saved programmes.
uvwxyz{| }~v € } ‚ ƒ‚„„
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
Separate purchase(Wall mounting bracket)
t If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
Standard screw
Number of screws
Wall mount bracket
t Make sure that children do not climb on or hang on the TV.
VESA (A x B)
Standard screw
t Use a platform or cabinet that is strong and large enough to
support the TV securely.
t Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Number of screws
Wall mount bracket
300 x 300
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
VESA (A x B)
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the
use of LG’s wall mount bracket. When you do not use LG’s wall mount
bracket, please use a wall mount bracket where the device is adequately
secured to the wall with enough space to allow connectivity to external
…† ‡ˆ
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
t Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
t Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
t If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or qualified personnel.
t Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
t Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
t Use the screws that are listed on the VESA standard screw
t The wall mount kit includes an installation manual and necessary
t The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
t The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
t For more information, refer to the manual supplied with the wall
^ When installing the wall mounting bracket, use the Adhesive
Label. The Adhesive Label will protect the opening from
accumulating dust and dirt. (Only when the item of the following
form is provided)
^ When attaching a wall mounting bracket to the TV, insert the wall
mount spacers into the TV wall mount holes to adjust the vertical
angle of the TV. (Only when the item of the following form is
Provided Item
t Refer to the external equipment’s manual for operating
t If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
t In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
t In PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
t Use a signal splitter to use more than 2 TVs.
t If the image quality is poor, install a signal amplifier properly to
improve the image quality.
t If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
t An antenna cable and converter are not supplied.
t Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω).
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
CI module connection
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
View the encrypted (pay) services in digital TV mode.
t The external device connection may differ from the model.
t Connect external devices to the TV regardless of the order of the
TV port.
t If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
(Depending on model)
t Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
t If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Euro scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable as shown.
Analogue TV, AV
(TV Out1)
4 ghi 5 jkl 6 mno
7pqrs 8 tuv 9wxyz
Q TV Out : Outputs Analogue TV or Digital TV signals.
t Any Euro scart cable used must be signal shielded.
t When watching digital TV in 3D imaging mode, only 2D out signals
can be output through the SCART cable. (Only 3D models)
t If you use the Time Machine function on digital TV, monitor out
signals cannot be output through the SCART cable. (Only 3D
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Remote control
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
t Do not mix old and new batteries, as this may damage the remote
t The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
1.,;@ 2 abc 3 def
Other connections
input mode
Digital TV
8hanges the input source. (Depending on model)
/ (Q. Settings) ,(((—%!.C!$()
(Depending on model)
,(((—%!.C!$() 4D!$J
Resizes an image. (Depending on model)
screen. (Depending on model)
(User Guide) Cees user-guide.
screen. (Depending on model)
M%es all sounds.
Ccrolls through the saved programmes.
Number buttons nters numbers.
ws programme guide.
o the previously viewed programme.
Adjusts the volume level.
Magic remote functions
(Depending on model)
When the message “Magic remote battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
t Do not mix old and new batteries, as this may damage the remote
›œws the previous history.
(HOME) žŸŸ ¡¡ ¡¢œ £¤ ¤ ¥¦§¨© ª ¥«¬¥­¥¤« ®¯
žŸŸ ¡¡ ¡¢œ £¤ ¤ ¥¦§¨© ª ¥«¬¥­¥¤« ®¯
›œws the list of Apps.
Navigation buttons (up/down/left/right) ›crolls through
menus or options.
›elects menus or options and confirms your input.
° ¢¦±¥¡¢o the previous level.
›œws the list of Recommended, Programmes, Search
and Recorded. (Depending on model)
²lears on-screen displays and returns to TV viewing.
1. @
2 abc
3 def
4 ghi
5 jkl
6 mno
8 tuv
³œ ¡ ´ŸŸ ¡¡¡ª Ÿ¬´®µ¦¥Ÿ¢¬¥¡¬¥ ¡¤ ¶·reen, ¶¸ ®®¹º ¶»lue)
6 Coloured buttons
TELETEXT buttons(
) These buttons are used for
elects the MHP TV menu source. (Only Italy) (Depending
on model)
Control buttons (
contents, Time MachineReady or SmartShare menus or the SIMPLINK
compatible devices (USB or SIMPLINK or Time MachineReady).
tarts to record and displays record menu. (Only Time
MachineReady supported model)
alls your preferred subtitle in digital mode.
y Pressing AD button, audio descriptions function will be
¶° «
° ¢¦±¥¡¢
²¥¢±®¡¢œ ¼± ¤¬¦¤
° Ÿ
› ® Ÿ¢¡°´«¬º³½´¥«©³½ª±­±´¤¤ §
³¦±¥¡¢œ ³½¥±Æ§
²œ´¥­ ¡¢œ ¬¥ª¦¢¡¦±Ÿ §
* Pressing and holding the Ǧ¢¢on displays all the lists of
external inputs.
Number buttons Ènters numbers.
žŸŸ ¡¡ ¡¢œ ¡´É « ª±­±´¤¤ ®¬¡¢§
(Space) ʪ ¥¡´¥ ¤ª¢Ë¡ª´Ÿ ¥¢œ ¡Ÿ± ¥Ì Ëǝ´±«§
½¬ ¹¡¢œ ¬¥µ±¤´¢¬¥µ¢œ Ÿ¦±± ¥¢ª±­±´¤¤ ´¥«¡Ÿ± ¥§
Ò¡ «µ±É¬ ¹¬¥­Ó©É¬« §¨Ê¥®Ë Ó©¤« ®¡¯
Adjusts the volume level.
Scrolls through the saved programmes.
Φ¢es all sounds.
(Voice recognition)
žŸŸ ¡¡ ¡¢œ £¤ ¤ ¥¦§
° ¢¦±¥¡¢
²® ´±¡¥Ï¡Ÿ± ¥«¬¡ª®´Ë¡´¥«± ¢¦±¥¢³½É¬ ¹¬¥­§
* By pressing and holding the
on, audio descriptions
function will be enabled. (Depending on model)
o the previous level.
¨© ª ¥«¬¥­¥¤« ®¯
Network connection is required to use the voice recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window appears on the TV screen.
t Use the Magic Remote no further than 10 cm from your face.
t The voice recognition may fail when you speak too fast or too
t The recognition rate may vary depending on the user’s
characteristics (voice, pronunciation, intonation, and speed)
and the environment (noise and TV volume).
(Q. Settings)
žŸŸ ¡¡ ¡¢œ Ô¦¬ŸÌ› ¢¢¬¥­¡§
Ǧ¢¢on displays the Advanced menu.
Coloured buttons ³œ ¡ ´ŸŸ ¡¡¡ª Ÿ¬´®µ¦¥Ÿ¢¬¥¡¬¥ ¡¤ ¤ ¥¦¡§
¶·reen, ¶¸ ®®¹º ¶»lue)
( ¶° «,
* Pressing and holding the
TELETEXT buttons(
) These buttons are used for
° Ÿalls your preferred subtitle in digital mode.
Registering magic remote
How to register the magic remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK)
the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV off and back on.
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the wheel button.
Navigation buttons
Press the up, down, left or right button to scroll the menu.
buttons while the pointer is in use,
If you press
the pointer will disappear from the screen and Magic Remote will
operate like a general remote control.
How to deregister the magic remote
Press the
(BACK) and
(HOME) buttons at the same time, for
five seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
register Magic Remote at once.
Ǧ¢¢¥ ¹¬®® ® ¢ ˝¦ Ÿ´¥Ÿ ® ´¥« ± Ï
To display the pointer on the screen again, shake Magic Remote to
the left and right.
ws programme guide.
(Screen Remote)
©¬¡ª®´Ë¡¢œ ›Ÿ± ¥° ¤¢ §
*Accesses the Universal Control Menu. (Depending on model)
ãäåæ çèéêëå çèìíîïêå
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
›œ´Ì ¢œ δ­¬Ÿ ° ¤¢ ¡®¬­œ¢®Ë ¢¢œ ±¬­œ¢´¥«® µ¢±ª± ¡¡
Ǧ¢¢ons to make the pointer appear on
the screen.
(In some TV models, the pointer will appear when you turn the
Wheel (OK) on.)
y If the pointer has not been used for a certain period of time or Magic
Remote is placed on a flat surface, then the pointer will disappear.
y If the pointer is not responding smoothly, you can reset the pointer
by moving it to the edge of the screen.
y The Magic Remote depletes batteries faster than a normal remote
due to the additional features.
Precautions to take when using the
magic remote
t Use the remote control within the specified range (within 10 m).
You may experience communication failures when using the device
outside the coverage area or if there are obstacles within the
coverage area.
t You may experience communication failures depending on the
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may
cause communication failures.
t The Magic Remote may not work properly if a wireless router (AP)
is within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
t Do not disassemble or heat the battery.
t Do not drop the battery. Avoid extreme shocks to the battery.
t Inserting the battery in the wrong way may result in explosion.
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
Cannot control the TV with the remote control.
t Check the remote control sensor on the product and try again.
t Check if there is any obstacle between the product and the remote
t Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
t Check if the product is turned on.
t Check if the power cord is connected to a wall outlet.
t Check if there is a problem in the wall outlet by connecting other
The TV turns off suddenly.
t Check the power control settings. The power supply may be
t Check if the Automatic Standby
Timer Timer Power Off tivated in the TIMERS
t If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
¬¡ ´Ÿ
¨© ª ¥«¬¥­¥¤« ®¯Ñ
¡ ¢¢¬¥­¡
t Turn the TV off/on using the remote control.
t Reconnect the HDMI cable.
t Restart the PC with the TV on.
» Ÿ´¦¡ Ç´¥«Ÿœ´¥¥ ®¦¡ «ÇË¢œ Ÿ¦¥¢±ËŸ¦®«Ç «¬µµ ± ¥¢º¢œ ³œ¬¡ « ɬŸ ¡œ¦®«Ç ¬¥¡¢´®® «´¥«ª ±´¢ «¹¬¢œ¤¬¥¬¤¦¤
Wireless module (LGSBW41) Specification
ö¬± ® ¡¡ñž÷
IEEE 802.11a/b/g/n
Bluetooth Version 4.0
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
2400 to 2483.5 MHz
øùù§ù ¤¤úõõ§ù ¤¤úõ§ù ¤¤
ùû²¢o 40 °C
ñ ¡¡¢œ´¥üùý
Storage Temperature
Ïþùû²¢o 60 °C
Storage Humidity
ñ ¡¡¢œ´¥üõý
10 dBm or Lower
number of
ÿD D ©½»Ï³Ñ³þô
Analogue TV
VHF: E2 to E12
UHF : E21 to E69
CATV: S1 to S20
HYPER: S21 to S47
½£ò, UHF, C-Band*,
Wireless module specification
user can not change or adjust the operating frequency and this
product is set for the regional frequency table.
distance 20 cm between the device and your body. And this phrase
is for the general statement for consideration of user environment.
802.11a: 13 dBm
802.11b: 15 dBm
802.11g: 14 dBm
802.11n - 2.4GHz: 16 dBm
802.11n - 5GHz: 16 dBm
CI Module (W x H x D)
7 *Only DVB-T2/C/S/S2 support models.
LG Recycling Policy (Only EU)
LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste
regulations are in place, and also provides product and packaging take-back & recycling service voluntarily in some countries. LG Electronics evaluates
products’ recyclability at the design step using LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable. Through
these activities, LG seeks to contribute to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at http://www.lg.com/global/sustainability/environment/take-backrecycling
Energy Saving
Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. The following indications allow to reduce power
consumption when the television is not being watched:
t Turning the television off at its mains supply, or un-plugging it, will cut energy use to zero for all televisions, and is recommended when the
television is not being used for a long time, e.g. when on holiday,
t Putting the television into standby mode, will reduce energy consumption, but will still draw some power,
t Reducing the brightness of the screen will reduce energy use.
Isolator (Only Sweden, Norway)
t “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with
a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency
range (galvanic isolator, see EN 60728-11)”
t “Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning och samtidigt är kopplad till kabel-TV nät kan i
vissa fall medföra risk för brand.
För att undvika detta skall vid anslutning av utrustningen till kabel-TV nät galvanisk isolator finnas mellan utrustningen och kabel-TV nätet.”
t “Utstyr som er koplet til beskyttelsesjord via nettplugg og/eller via annet jordtilkoplet utstyr - og er tilkoplet et kabel-TV nett, kan forårsake
For å unngå dette skal det ved tilkopling av utstyret til kabel-TV nettet installeres en galvanisk isolator mellom utstyret og kabel-TV nettet.”
EU ecolabel (Only EU ecolabel applied model)
t High Energy Efficiency
t Reduced CO2 emissions
t Designed to facilitate repair and recycling
... better for you.
EU Ecolabel : PL/22/004
LGE announced the ‘LG Declaration for a Cleaner Environment ‘in 1994, and this ideal has served as a Guiding managerial principle ever since. The
Declaration is a foundation that has allowed us to undertaike Environmentally friendly activities in careful consideration of economic, environmental,
and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the Concept of
environment- friendly through whole process from getting raw materials, production, transportation, usage and end-of-life. These environmental
characteristics are endorsed by the award of the European Commission as approval of the product environmental status for energy saving. Facilities
for recycling and a host of other features.
The full list of criteria and more information on the eco label can be found at the web-site address : http://www.ecolabel.eu
Restriction of Hazardous Substances (Only Ukraine)
Обмеження України на наявність небезпечних речовин
t The equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in
electrical and electronic equipment.
t Устаткування відповідає вимогам технічного регламенту щодо обмеженного використання небезпечних речовин в електричному і
електронному обладнанні.
Packing Information (Only Russia, Kazakhstan, Belarus)
Символ «не для пищевой продукции» применяется в соответствие с техническим регламентом Таможенного союза «О безопасности
упаковки» 005/2011 и указывает на то, что упаковка данного продукта не предназначена для повторного использования и подлежит
утилизации. Упаковку данного продукта запрещается использовать для хранения пищевой продукции.

Символ «петля Мебиуса» указывает на возможность утилизации упаковки. Символ может быть дополнен обозначением материала
упаковки в виде цифрового и/или буквенного обозначения.
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
LG Customer Information Centre
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
0 810 144 131
0900 543 5454
015 200 255
800 187 40
Luxembourg 0032 15 200255
801 54 54 54
Ȼɴɥɝɚɪɢɹ 07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
963 05 05 00
3220 dites LG ou tapez 54
0770 54 54 54
01806 11 54 11
(0,20€ pro Anruf aus
Deutschland dem Festnetz der DTAG; Schweiz
0848 543 543
Mobilfunk: max. 0,60€
pro Anruf.)
United Kingdom
0344 847 5454
8 800 200 7676
.BHZBSPST[ H 06 40 54 54 54
800 9990
01 686 9454
0 800 303 000
8 8000 805 805,
801 11 200 900,
210 4800 564
Ȼɟɥɚɪɭɫɶ 8 820 0071 1111
ɍɡɛɟɤɢɫɬDɧ 8 800 120 2222
Ʉɵɪɝɵɡɫɬɚɧ 8 0000 710 005
444 6 543
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF