LG | 42LS3450 | LG 42LS3450 Owner’s Manual

User’s Guide Specification
SUFFIX
2.
관 리 자
JO Kim
GW Lee HJ Shin
12.02.22 12.02.22 12.02. 22
1. Model Description
MODEL
담 당
LG
19LS3500-ZA
BRAND
EK
Product Name
Part No.
19/22/26/32LS35**
MFL67409506
(1208-REV05)
Printing Specification
1. Trim Size (Format) : 182mm x 257 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Uncoated paper , 백상지 60 g/㎡
• Inside : Uncoated paper , 백상지 60 g/㎡
4. Printing Method : Off-set
5. Bindery : Saddle Stitch
6. Language : Eng (1)
7. Number of pages : 36 pages
This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Notes Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3.
Special Instructions
(1) Origin Notification
* LGEIN: Printed in Indonesia
* LGESP : Printed in Brazil
* LGEND/NP : Printed in China
* LGEMA : Printed in Poland
4.
* LGEWA : Printed in U.K.
* LGEMX : Printed in Mexico
* LGEIL : Printed in India
Changes
8
7
6
add the contents about protection cover (only 32LS345*) and
5
Aug./22/12
4
Jul./16/12 Gowoon LEE EKLC700991
Changed the CIC call no.
3
Jun./19/12 Gowoon LEE EKLC601246
Added the broadcast system of analogue TV.
2
May/17/12 Gowoon LEE EKLC501155
Added the LS3450 model.
1
Apr./10/12 Gowoon LEE EKLC400782
Changed the screw of 19/22LS35 models.
REV.
NO.
Sungho Jo
MM/DD/YY SIGNATURE
EKLC801159 change for some contents
CHANGE NO.
CHANGE
CONTENTS
P/NO. MFL67409506
Total pages : 36 pages
Pagination sheet
LG(EN)
Front cover
LG(Eng)
2
3
…
…
34
Blank
Back cover
OWNER’S MANUAL
LED LCD TV / LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
LS35**
LS34**
CS46**
P/NO : MFL67409506(1208-REV05)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
29
ENTERTAINMENT
3
OPEN SOURCE SOFTWARE NOTICE
29
29
Wired Network Connection
Network setting
4
SAFETY INSTRUCTIONS
30
USING THE USER GUIDE
10
INSTALLATION PROCEDURE
31
MAINTENANCE
10
ASSEMBLING AND PREPARING
31
31
31
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
10
14
15
16
16
19
21
22
22
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
Not using the Desk-Type Stand
31
TROUBLESHOOTING
32
SPECIFICATIONS
23
MAKING CONNECTIONS
24
24
24
25
25
26
26
27
27
Antenna connection
Satellite dish connection
Adapter connection
HDMI connection
Component connection
Composite connection
USB connection
CI module connection
Euro Scart connection
28
REMOTE CONTROL
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y Do not place the TV and remote control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce heat
- Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
y Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
y Mains plug is the disconnecting device. The plug must remain readily operable.
y Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y Make sure to connect the power cable to the grounded current. (Except for devices
which are not grounded.)
You may be electrocuted or injured.
y Fix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
y Ensure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.
y Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
y Bend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
y When mounting a TV it on the wall, make sure not to install TV by hanging power
and signal cables on the back of the TV.
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
y Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
y Keep the packing anti-moisture material or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
y Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
y Dispose of used batteries carefully to protect a child from eating them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
y Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)
y Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
y Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
y Do not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.
y Do not allow a impact shock or any objects to fall into the product, and do not drop
onto the screen with something.
You may be injured or the product can be damaged.
y Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
y Never touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
y Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man.
yy
This may create a fire hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology product with resolution of two million to six million
yy
pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and colour of the panel depending on your
yy
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Remote control and
batteries (AAA)
(See p. 28)
Owner’s manual
Cable holder
(Depending on model)
(See p. 22)
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Adapter
(Only 19/22/26LS35**)
(See p. 24)
Stand Screw
2EA, P4 x 16
(Only 19/22LS35**)
(See p. 16)
Stand Screw
2EA, M4 x 14
(Only 26LS35**)
(See p. 16)
Stand Screw
4EA, P4 x 16
4EA, M4 x 14
(Only 32LS35**, 42LS345*)
(See p. 16, 18)
Stand Screw
8EA, M4 x 20
(Only 26/32/42CS46**,
32/42LS340*)
(See p. 17)
Stand Screw
2EA, P4 x 16
4EA, M4 x 20
(Only 32LS345*)
(See p. 18)
Desk-mount screw
(Only 32LS35**,
26/32/42CS46**,
32/42LS34**)
(See p. 19)
Power Cord
Protection cover
(Only 26CS46**)
(See p. 22)
Protection cover
(Only 32CS46**,
32LS340*)
(See p. 22)
Protection cover
(Only 42CS46**,
42LS340*)
(See p. 22)
Protection cover
(Only 32LS345*)
(See p. 22, 23)
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
Stand Body / Stand Base
(Only 19/22/26LS35**)
(See p. 16)
Stand Body / Stand Base
(Only 32LS35**)
(See p. 16)
Stand Body / Stand Base
(Only 26CS46**)
(See p. 17)
Stand Body / Stand Base
(Only 32/42CS46**, 32/42LS340*)
(See p. 17)
Stand Body / Stand Base
(Only 32LS345*)
(See p. 18)
Stand Body / Stand Base
(Only 42LS345*)
(See p. 18)
ASSEMBLING AND PREPARING
yy Power Cord Installation Guide
-- If the power cord provided with TV looks like the below picture, please ensure that it is inserted in
the right direction.
TV
Power Cord
Correct
Wrong
ENGLISH
ENG
CAUTION
13
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
A type :
19/22/26/32LS35**, 26/32/42CS46**,
32/42LS340*
B type :
32/42LS345*
buttons
Screen
Screen
Remote control
and intelligent
sensors1
OK
Power
indicator
Speakers
Touch buttons
OK
Speakers
Remote control and
intelligent sensors1
OK
SETTINGS
SETTINGS
INPUT
INPUT
Power indicator
A type2
Buttons
B type
Description
Scrolls through
the saved programmes.
H
H
Adjusts
the volume level.
H
H
OK ꔉ
SETTINGS
H
S
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
INPUTH
Changes the input source.
/I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 A type buttons are touch sensitive and can be operated through simple touch with your finger.
SETTI
INPU
ASSEMBLING AND PREPARING
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ENGLISH
ENG
Lifting and moving the TV
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Attaching the stand
Screw(Stand+Head)
M4 x 14
Image shown may differ from your TV.
32LS35**
19/22/26LS35**
Stand Body
1
1
4EA
Stand Body
w(Stand+Head)
14
Stand Base
Screw(Stand+Head)
M4 x 14
2
Stand Base
2
3
3
4EA
Model
19/22LS35**
26LS35**
Standard screw
P4 x 16
M4 x 14
Number of screw
2EA
2EA
M4 x 14
P4 x 16
ASSEMBLING AND PREPARING
32/42CS46**, 32/42LS340*
1
ENGLISH
ENG
26CS46**
1
4EA
4EA
M4 x 20
M4 x 20
Stand Body
Stand Body
Stand Base
Stand Base
2
2
3
3
4EA
4EA
M4 x 20
M4 x 20
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
32LS345*
42LS345*
1
1
2EA
4EA
P4 x 16
P4 x 16
Stand Body
Stand Body
Stand Base
Stand Base
2
2
3
3
4EA
4EA
M4 x 20
M4 x 14
19
Securing the TV to a table
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
(Only 32LS35**, 26/32/42CS46**, 32/42LS34**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
NOTE
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
(Only 32/42CS46**, 32/42LS340*)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
20
20
CAUTION
yy When adjusting the angle of the product,
watch out for your fingers.
»»Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
ENGLISH
ENG
se
ASSEMBLING AND PREPARING
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
Using the Kensington security system
(Depending on model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
A
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
19/22/26LS35** 32LS35**,
26/32CS46**,
32LS34**
VESA (A x B)
100 x 100
200 x 100
Standard screw M4
M4
Number of
4
4
screws
Wall mount
LSW100B
LSW100B
bracket
Model
VESA (A x B)
Standard screw
Number of
screws
Wall mount
bracket
42CS46**, 42LS34**
200 x 200
M6
4
LSW200BX
LSW220BX
B
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provied. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ENGLISH
ENG
Mounting on a wall
21
22 ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
(Only 26/32/42CS46**, 32/42LS340*)
Gather and bind the cables with the cable holder.
(Only 19LS35**)
1 Gather and bind the cables with the cable
management.
2 Fix the cable management firmly to the TV.
Cable Holder
(Only 22/26LS35**)
Cable Management
CAUTION
yy Do not move the TV by holding the cable
management, as the cable management may
break, and injuries and damage to the TV may
occur.
Cable Holder
(Only 32LS35**, 32/42LS345*)
Not using the Desk-Type
Stand
(Only 26/32/42CS46**, 32/42LS340*, 32LS345*)
• When installing the wall mounting bracket,
use the Protection cover. This will protect the
opening from accumulating dust and dirt.
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
Protection cover
ASSEMBLING AND PREPARING / MAKING CONNECTIONS
(Only 32LS345*)
yy When removing Protection cover from
bottom of TV insert your fingers into hole of
cover hold firmly and pull upwards towards
you to remove.
Protection cover
MAKING
CONNECTIONS
yy This section on MAKING CONNECTIONS
mainly uses diagrams for the LS35** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
ENGLISH
ENG
NOTE
23
ENGLISH
ENG
NNA/
E IN
24 MAKING CONNECTIONS
Antenna connection
Adapter connection
(Only 19/22/26LS35**)
DC IN
13/18V
700mA Max
ANTENNA/
CABLE IN
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
Satellite dish connection
(Only satellite models)
13/18V
700mA Max
LNB IN
Satellite
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
DC Adapter LNB IN
Satellite
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
3 Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
CAUTION
yy Please be sure to connect the TV to the DC
power adapter before connecting the TV’s
power plug to a wall power outlet.
MAKING CONNECTIONS
25
2
L
VIDEO
COMPONENT
IN
R
AUDIO
RED
PR
WHITE
PB
RED
DVD/ Blu-Ray
/ HD Cable Box
/ HD STB / PC
Y
BLUE
IN
GREEN
1
AV IN 2
L/MONO AUDIO R
VIDEO
(*Not Provided)
(*Not Provided)
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus
y Supported HDMI Audio format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)
VIDEO
RED
NOTE
WHITE
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown
in the following illustration.
Choose any HDMI input port to connect. It does
not matter which port you use.
RED
BLUE
GREEN
L
HDMI
R
AUDIO
DVD/ Blu-Ray / HD Cable Box
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
ENGLISH
ENG
Component connection
HDMI connection
26 MAKING CONNECTIONS
Composite connection
USB IN
ENGLISH
ENG
USB connection
AV IN 2
L/MONO AUDIO R
VIDEO
Y
PB
VIDEO
PR
L
R
AUDIO
COMPONENT
IN
RED
WHITE
YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO
L (MONO) AUDIO R
DVD/ Blu-Ray / HD Cable Box / VCR
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the composite cable as
shown.
USB
(*Not Provided)
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
MAKING CONNECTIONS
Euro Scart connection
AV IN 1 (RGB)
(*Not Provided)
AUDIO / VIDEO
yy Image shown may differ from your TV.
View the encrypted (pay) services in digital TV
mode. This feature is not available for all countries.
NOTE
yy Check if the CI module is inserted into the
PCMCIA card slot in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown. To display images by using progressive
scan, make sure to use the euro scart cable.
Current
input mode
Output
Type
Digital TV
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
ENGLISH
ENG
CI module connection
27
28 REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
ENERGY
ENERGY
TV/RAD
SAVING
SAVING
GUIDE
INFO
GUIDE
RATIO
LIST
LIST
Q.VIEW
Q.MENU
SETTINGS
SETTINGS
Navigation buttons
(up/down/left/right)
EXIT
FAV
AD
P
P
A
G
E
AD
PAGE
1 Coloured buttons
MUTE
1
Control buttons
(
)
2
2 TELETEXT
BUTTONS
Adjusts TV/RAD
the brightness of the screen to reduce
energy consumption.
RATIO
INFO
Selects Radio, TV and DTV programme.
Shows programme guide.
Views the information of the current programme
and screen.
Resizes an image.
Changes the input source.
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
Accesses the main menus.
Accesses the Quick menus.
Q.MENU
Scrolls through menus or options.
Selects menus or options and confirms your input.
Returns to the previous level.
EXIT
Clears on-screen
displays and return to TV
viewing.
Accesses your favourite programme list.
FAV
Switches
the Audio Description on or off.
Moves toP the previous or next screen.
MUTE
These
access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Recalls your preferred subtitle in digital mode.
Controls the MY MEDIA menus, or the SIMPLINK
compatible devices (USB,SIMPLINK).
These buttons are used for teletext.
P
A
G
E
ENTERTAINMENT
29
ENGLISH
ENG
ENTERTAINMENT
(Depending on model)
Image shown may differ from your TV.
Wired Network Connection
Internet
connection
Wired router
Network setting
1
Press the SETTING button to access the main
menu.
2
Select the NETWORK → Network Setting
menu.
NETWORK
4
The device automatically tries to connect to the
network.
Network Setting
Network connecting...
Move
OK
Network Setting
Network Status
Cancle
Previous
5
The connected network is displayed.
Select the Complete to confirm the network
connection.
Network Setting
3
Select the Start Connection.
Network Setting
Wired network is connected.
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
For detailed settings, select [Set Expert].
Set Expert
Previous
Start Connection
Previous
Complete
30 USING THE USER GUIDE
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
Press SETTINGS to access the main menus.
Press the RED button to access the Customer
Support menus.
Press the Navigation buttons to scroll to User
Guide and press OK.
1
2
3
User Guide
1
CHANNEL Setting
PICTURE, SOUND Setting
OPTION
Advanced Function
PICTURE
AUDIO
SETUP
TIME
LOCK
OPTION
NETWORK
MY MEDIA
Press OK() to set picture settings.
Customer Support
OPTION > To set language
SETTING   OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
y Menu Language : Selects a language for the display text.
y Audio Language [In Digital Mode Only] : Select the desired language
when watching digital broadcasting containg several
voice languages.
y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not
broadcast, the default language subtitle will
be displayed.
Information
2
Zoom In
Close
SETTING   OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
y Menu Language : Selects a language for the display text.
y Audio Language [In Digital Mode Only] : elect the desired language when
watching digital broadcasting containg several voice
languages.
y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Exit
Software Update
Picture Test
Sound Test
Signal Test
2
Product/Service Info.
Zoom Out
Close
Network Test
User Guide
Close
User Guide
3
2
To use input device
To use Energy Saving feature
PROGRAMME Setting
To set time options
PICTURE, SOUND Setting
OPTION
To set TV lock options
To set language
Advanced Function
Disabled Assistance
Information
1
To set other options
1
Allows to select the category you want.
2
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
3
Allows to browse the description of the
function you want from the index.
1
Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2
Zooms in or out the screen.
MAINTENANCE / TROUBLESHOOTING
31
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to , to ).
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
ENGLISH
ENG
MAINTENANCE
32 SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
19LS35**
22LS35**
26LS35**
19LS3500-ZA
19LS350S-ZA
19LS350T-ZA
22LS3500-ZA
22LS350S-ZA
22LS350T-ZA
22LS3510-ZB
22LS351T-ZB
22LS3590-ZC
26LS3500-ZA
26LS350S-ZA
26LS350T-ZA
26LS3510-ZB
26LS351T-ZB
26LS3590-ZC
26LS359S-ZC
26LS359T-ZC
523.0 x 376.0 x 140.0
627.0 x 442.0 x 162.0
451.0 x 334.0 x 140.0
Dimensions With stand (mm)
(W x H x D) Without stand (mm) 451.0 x 296.0 x 31.5
Weight
523.0 x 339.0 x 31.6
627.0 x 402.0 x 30.1
With stand (kg)
2.8
3.5
5.0
Without stand (kg)
2.6
3.2
4.7
32 W
DC 24V, 1.2A
32LS35**
35 W
DC 24V, 1.4A
26CS46**
50 W
DC 24V, 1.8A
32CS46**
32LS3500-ZA
32LS350S-ZA
32LS350T-ZA
32LS3510-ZB
32LS351T-ZB
32LS3590-ZC
32LS359S-ZC
32LS359T-ZC
26CS460-ZA
26CS460S-ZA
26CS460T-ZA
26CS465-ZA
26CS466-ZA
32CS460-ZA
32CS460S-ZA
32CS460T-ZA
32CS465-ZA
32CS466-ZA
755.0 x 530.0 x 239.0
755.0 x 479.0 x 45.8
8.5
7.7
60 W
AC 100-240 V~ 50 / 60 Hz
42CS46**
663.0 x 483.0 x 197.0
663.0 x 424.0 x 72.8
7.4
6.6
100 W
AC 100-240 V~ 50 / 60 Hz
32LS340*
794.0 x 565.0 x 207.0
794.0 x 504.0 x 73.5
9.0
8.0
110 W
AC 100-240 V~ 50 / 60 Hz
42LS340*
42CS460-ZA
42CS460S-ZA
42CS460T-ZA
42CS465-ZA
42CS466-ZA
32LS3400-ZC
32LS340S-ZC
32LS340T-ZC
42LS3400-ZC
42LS340S-ZC
42LS340T-ZC
1017.0 x 695.0 x 261.0
1017.0 x 629.0 x 76.5
15.1
13.5
170 W
AC 100-240 V~ 50 / 60 Hz
795.0 x 566.0 x 207.0
795.0 x 504.0 x 73.5
9.1
8.1
70 W
AC 100-240 V~ 50 / 60 Hz
1018.0 x 696.0 x 261.0
1018.0 x 629.0 x 76.5
14.7
13.1
120 W
AC 100-240 V~ 50 / 60 Hz
Power Consumption
Power requirement
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
With stand (kg)
Weight
Without stand (kg)
Power Consumption
Power requirement
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
With stand (kg)
Weight
Without stand (kg)
Power Consumption
Power requirement
SPECIFICATIONS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
With stand (kg)
Weight
Without stand (kg)
Power Consumption
Power requirement
42LS345*
32LS3450-ZA
32LS345S-ZA
32LS345T-ZA
42LS3450-ZA
42LS345S-ZA
42LS345T-ZA
738.0 x 501.0 x 185.0
738.0 x 438.0 x 86.0
7.5
6.9
60 W
AC 100-240 V~ 50 / 60 Hz
972.0 x 635.0 x 212.0
972.0 x 571.0 x 86.0
11.8
10.7
90 W
AC 100-240 V~ 50 / 60 Hz
CI Module Size(W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
Environment
condition
ENGLISH
ENG
MODELS
32LS345*
33
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Satellite Digital TV1 Digital TV2
Digital TV
Analogue TV
Television system
DVB-T
DVB-C
DVB-S/S2
DVB-T/T2
DVB-C
DVB-T
DVB-C
PAL/SECAM B/G/D/K
PAL-I/I’, SECAM L/L’3
Programme coverage
VHF, UHF
C-Band, Ku-Band
VHF, UHF
Maximum number of
storable programmes
6,000
1,500
External antenna impedance 75 Ω
1 Only satellite models
2 Only DVB-T2 support models
3 Except for DVB-T2 support models
VHF: E2 to E12, UHF :
E21 to E69, CATV: S1 to
S20, HYPER: S21 to S47
34 SPECIFICATIONS
ENGLISH
ENG
HDMI-DTV supported mode
HDMI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
31.25
59.94
60
50
640x350
720x400
31.468
31.469
70.09
70.08
37.5
44.96
45
33.72
33.75
28.125
26.97
27
33.75
56.25
67.43
67.5
50
59.94
60
59.94
60
50
23.97
24
30.00
50
59.94
60
640x480
800x600
1024x768
1152x864
1360x768
1280x1024
1920x1080
31.469
37.879
48.363
54.348
47.712
63.981
67.50
59.94
60.31
60.00
60.053
60.015
60.020
60.00
720x576
1280x720
1920x1080
Component port connecting information
Component ports on the TV Y
PB
PR
Video output ports on DVD
player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component
O
O
O
O
(50 Hz / 60 Hz only)
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
Country
Service
0900 543 5454
015 200 255
800 187 40
0032 15 200 255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
3220
MODEL
SERIAL
Latvija
Service
0 810 144 131
902 500 234
54
0770 54 54 54
01803 11 54 11
0848 543 543
801 11 200 900,
210 4800 564
0844 847 5454
06 40 54 54 54
800 9990
0818 27 6955
0 800 303 000
199600099
8 820 0071 1111
8 8000 805 805,
2255(GSM)
80200201
8 800 120 2222
880008081
8 0000 710 005
8 800 200 7676
Download PDF

advertising