ENGLISH DEUTSCH FRANCAIS PORTUGUES ESPANOL ITALIANO NEDERLANDS LCDTVPASM OWNER'MAUL LCDTVMOESPA PleasrdInfomtiMucghbpa- Retainforuc.Recordmlnubasifth.Skvqoeisnrmatyudlwhc. * * * 42PC1R 42PC3R 50PC1R * * * * * * * * * * 37LC2R 42LC R 37LC25R 42LC5R 37LC3R 42LC3R 32LB2R 37LB2R 42LB R 47LB2R ingyourset. ∂IIEOEI¿ ACCESSORIES Ensure that the following accessories are included purchased the product. with your TV. If accessory is an missing, please contact the dealer where you Owner's Manual INPUT TV TV POWER INPUT DVD ARC VCR TEXT SIZE PIPPR+ SWAP PIPPR- PIP LIST MENU POSTION PIPINPUT Polishing I/II EXIT Owner's Manual SLEEP Polish the screen Cloth ACESORI with the cloth OK (Option) Q.VIEW VOL PR MUTE 123 * 456 789 * 0 FAV TIME REVEAL INDEX Remote Control Batteries Slightly wipe stained spot on the exterior only with cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior. Do not wipe roughly when removing stain. Please the ? Power Cord be cautious of that excessive power may scratch 42/50PC1R * , 42PC3R or cause discoloration. * 2-bolts for stand assembly (Refer p.12) 2-Wall brackets This feature is not available 2-eye-bolts for all models. 37/42LC2R *, 37/42LC25R 2-TV brackets *, 37/42LC3R *, 32/37/42/47LB2R Twister Holder 2-Wall brackets Arrange * 2-bolts the wires with the twister holder. 37/42LC3R * 37/42LC2R *, 37/42LC25R *, 32/37/42/47LB2R* Cable Cable Management Management 1 CONTENTS ACCESSORIES...................................................1 On Screen Menus Selection and INTRODUCTION CONTE S TV MENU Controls/ConnectionOptions..........................4-9 Remote Control Key Functions/ InstallingBatteries........................................10-11 INSTALLATION Setting Adjustment . . . . .34 up TV stations Autoprogrammetuning...............................35 Manualprogrammetuning............................36 Finetuning..................................................37 Assigningastationname...............................38 Booster(Option).........................................39 Programmeedit...........................................40 UnfoldingTheBaseStand.................................12 Basic Connection / How to Remove the Cable Management/SwivelStand..........................13-14 How to join the product assembly to the wall toprotectthesettumbling...................................15 StandInstallation................................................16 Favouriteprogramme....................................41 Callingtheprogrammetable.........................42 Picture Menu PSM(PictureStatusMemory)......................43 Picture Adjustment (PSM-User option) .44 CSM(ColourStatusMemory)......................45 . Manual Colour CONNECTIONS & SETUP VCRSetup......................................................18-19 ExternalEquipmentConnections.......................20 DVDSetup....................................................21-22 STB(SET-TOPBOX)Setup.............................23-24 PCSetup......................................................25-27 TURNINGTHETVON...................................28-29 SPECIAL FUNCTIONS (Picture-In-Picture) . . . . . . Control (CSM-Useroption)....................................46 Function...........................................47 AntennaConnection............................................17 PIP Temperature . Double Window POP .30 WatchingPIP/DoubleWindow/POP. .30 ProgrammeSelectionforSubPicture. .30 Input Source Selection for Sub Picture Sub Picture Size Adjustment (PIP mode only)30 .31 Moving the Sub Picture (PIP mode only) Adjusting PIP Transparency (PIP mode only) .31 .31 Swapping between main and sub pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . POP (Picture-out-of-Picture: Programme Scan) . . .31 Teletext Advanced....................................................48 Reset...........................................................49 Sound Menu SSM(SoundStatusMemory).......................50 Sound Frequency Adjustment (SSM-Useroption)....................................51 AVL(AutoVolumeLeveler)...........................52 BalanceAdjustment.....................................52 Speaker.......................................................53 Stereo/DualReception.................................54 NICAMReception........................................55 SpeakerSoundOutputSelection..................55 Time Menu ClockSetup.................................................56 On/OffTime...............................................57 AutoSleep..................................................58 SleepTimer.................................................59 Menu Switchon/off.........................32 Special SIMPLEText..........................32 ChildLock...................................................60 TOPText.............................33 FASTEXT.............................33 SpecialTeletextFunctions...............33 ISM (Image Sticking Minimization) Method(Option).........................................61 LowPower(Option).....................................62 XDDemo....................................................62 2 TV MENU Screen Menu .63 AutoConfigure(RGB[PC]mode only). ManualConfigure........................................64 . . . . . . . . . . SettingthePictureFormat......................65-66 .67 Selecting Wide VGA/XGA/UXGA mode Initializing . (Resettooriginalfactorysettings). . . . . . . . . . . . . . . . . . . . . CONTE S .67 APPENDIX ProgrammingtheRemote.................................68 Programmingcode.....................................69-70 TroubleshootingChecklist............................71-72 Maintenance..................................................73 ProductSpecifications................................74-76 3 INTRODUCTION CONTROLS This is the front This is a of models 42 panel simplified representation 50PC1R * TVs. of a front panel. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUC Power/Standby Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on. INPUT MENU INPUT Button OK PR VOL OK Button PROGRAMME Buttons VOLUME Buttons POWER Button MENU Button This is the front panel of models 42PC3R * TVs. <Front Panel > PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button Remote Control Sensor Power/Standby 4 POWER Button Indicator ? illuminates red in ? illuminates white when the set is switched standby mode. on. <Side Panel > This is the front This is a panel of models 32 simplified representation of 37 a 42 front 47LB2R panel. * TVs. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUC RGB PC Index Remote Control Sensor Power/Standby TV mode ? AV 1, 2, 3, 4 (47LB2R * only), S-Video mode Indicator ( ) illuminates red in standby mode. illuminates white when the set is ? switched on. Component RGB PC RGB mode HDMI mode Intelligent eye Intelligent eye INPUT ME NU OK VOL PR OK Button MENU Button VOLUME PROGRAMME Buttons Buttons INPUT Button POWER Button 5 INTRODUCTION CONNECTION OPTION This is the back panel of models 42 50PC1R * , 42PC3R * TVs. Back Connection Panel AUDIO AVN4 Input Connections INTRODUC are available for listening an external device. stereo sound from R AUDIO L MONO VIDEO VIDEO Connects the video Input device. (except 1 2 signal from a video 42PC3R * ) 3 AV1 4 AV2 AC IN VARIABLE AUDOOU RGB IN RGB (PCD AUDIO V) DMN (RGB/DVI) 2 COMPONENT IN AVIN3 RS 1 DV) CON 232C N &SERV CE ANTENNA N ROL REMOTE CONTROL IN () MONO SVDEO 6 5 1 7 V DEO AUD O 8 9 the AUD O 10 RGB/Audio Input 11 6 Connect the monitor 2 V DEO output from a PC/DTV appropriate input port. Variable Audio Connect an amplifier Euro Scart Socket or add a 7 sub- input external device to these 4 or output from an 8 9 attempt DC power. S-Video device to these an S-VIDEO device. output from an external jacks. 10 Component Input Remote Control Port these 11 6 Input Audio/Video Input Connect 5 port of the control devices jack. Connect audio/video This TV operates on an AC power. The voltage is indicated on the Specifications page. Never on Input(CONTROL&SERVICE)Por t Connect S-Video out from jacks. operate the TV RS-232C to the RS-232C Power Cord Socket to HDMI Connect the serial (AV1/AV2) Connect scart socket signal to HDMI IN. DVI(VIDEO) signal to HDMI/DVI port a Connect woofer to your surround sound system. 3 Input with DVI to HDMI cable. Output external HDMI Connect to a component video/audio device jacks. Antenna Input to CONNECTION OPTION This is the back panel of models 32 37 42 47LB2R Back Connection Panel TVs. * 47LB2R * 42/37LB2R AVIN4 32LB2R * AVIN3 S-VIDEO S-VIDEO R R AUDIO L/MONO VIDEO AUDIO L/MONO VIDEO S-VIDEO AUDIO Input are available for listening stereo sound from an external device. Connections R AUDIO L/MONO VIDEO VIDEO Input Connects the video AVIN3 1 * 2 from a video device. INTRODUC signal 3 VARIABLE AUDOOU AV1 AV2 RGB IN DMN 2 RGB AUDIO (PC/DTV) (RGB/DVI) ANTENNA N COMPONENT IN REMOTE CONTROL IN 4 RS-232C IN 1 CONTROL & DV) 6 5 VIDEO SERVICE) AVIN3 S-VIDEO 7 L(MONO) AUDIO R 89 10 11 RGB IN RGB AUDIO (PC/DTV) (RGB/DVI) AV1 AV2 ANTENNA N DMN 1 DV) 2 RS-232C IN (CONTROL & SERVICE) AUDIO VIDEO VARIABLE AUDOOU COMPONENT IN 6 4 1 2 10 RGB/Audio Input output from the appropriate input port. Variable Audio Connect an 1 3 6 Connect the monitor 2 7 a PC/DTV Euro Scart Socket or add a 7 sub- input or output from an 8 operate the jacks. 9 TV on DC power. S-Video jack. Input an S-VIDEO device. Audio/Video Input Connect audio/video device to these output from an external jacks. 10 Component Input Connect 5 port of the control devices Connect S-Video out from This TV operates on an AC power. The voltage is indicated on the Specifications page. Never to Input(CONTROL&SERVICE)Por t to the RS-232C Power Cord Socket attempt RS-232C Connect the serial (AV1/AV2) external device to these 4 HDMI with DVI to HDMI cable. amplifier Connect scart socket signal to HDMI IN. DVI(VIDEO) signal to HDMI/DVI port a Connect woofer to your surround sound system. 3 Input Connect to Output external HDMI 11 Remote Control Port these 11 a component video/audio device to jacks. Antenna Input 7 INTRODUCTION CONTROLS This is the front This is a panel of models 37 simplified representation of 42LC2R a front 37 *, panel. 42LC25R *, 37 42LC3R * TVs. Here shown may be somewhat different from your TV. <Front Panel 37/42LC2R * ,37/42LC25R * > INTRODUC R PROGRAMME Buttons PR Remote Control Sensor VOLUME Buttons VOL Power/Standby ? ? illuminates red in Indicator standby mode. illuminates white when the set is switched on. OK Button OK MENU MENU Button INPUT INPUT Button <Front Panel 37/42LC3R * > POWER Button /I <Side Panel Remote Control Sensor Power/Standby ? ? 8 illuminates red in Indicator standby mode. illuminates white when the set is switched on. > CONNECTION OPTION This is the back panel of models 37 42LC2R *, 37 42LC25R *, 42LC3R * TVs. 37 Back Connection Panel AUDIO Input R AUDIO Connections L MON VIDEO AC IN are available for listening an external device. stereo sound from VIDEO AVN4 Input Connects the video device. 2 1 EMO (RGB/DVI) ANTENNA N E COMPONENT IN OL RS 232C N CON ROL &SERV CE SVDEO 1 5 6 7 9 8 10 RGB/Audio Input to Connect an 11 6 output from the appropriate input port. Variable Audio AUDIO MONO Connect the monitor 2 VIDEO AUDIO V DEO AVIN3 AC IN 4 a PC/DTV amplifier or add HDMI Input Connect signal to HDMI IN. DVI(VIDEO) signal to HDMI/DVI a Connect Output external a sub- 7 woofer to your surround sound system. HDMI port with DVI to HDMI cable. RS-232C Input(CONTROL&SERVICE)Port Connect the serial to the RS-232C 3 Euro Scart Socket (AV1/AV2) Connect scart socket input external device to these 4 or output from an 8 jacks. Power Cord Socket 5 to operate the 9 Remote Control Port TV on S-Video port of the control devices jack. Input Connect S-Video out from This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt INTRODUC AV2 N 1DV) video AUDIO V) 2 CO a VARIABLE AUDOOU RGB IN RGB (PCD from 3 AV1 HDMI IN signal an S-VIDEO device. Audio/Video Input Connect audio/video device to these output from an external jacks. DC power. 10 Component Input Connect these 11 a component video/audio device to jacks. Antenna Input 9 INTRODUCTION REMOTE CONTROL KEY FUNCTIONS POWER Switches the set from on standby off to or standby. INPUT TV TV POWER INPUT TV INPUT Returns from AV 1 AV 2 S-Video2 , , (except DVD 32/37/42LB2R * ), AV3 AV4 (except 42PC3R * 32/37/42LB2R * ), Component, RGB, HDMI1/DVI , , HDMI 2 to the TV mode. Switches the set on from or ARC VCR standby. PIP SIZE POSTION PIP PR+ SWAP PIP INPUT TEXT INTRODUC INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source (TV, AV 1 AV2 , , PIP PR- S-Video2(except 32/37/42LB2R * ), AV3 AV4 (except 42PC3R * 32/37/42LB2R * ), , , Component, RGB, HDMI1/DVI or HDMI 2). ARC Selects your desired picture LIST format. MENU I/II SLEEP EXIT Brightness Adjusts screen brightness. adjustment It returns to the default settings brightness by changing mode PIP SIZE source. Switches the sub OK picture PIP, DW, POP(except 47LB2R ) * the sub Adjusts picture or off mode. size. Q.VIEW POSITION Moves the sub PIPPR-/+ Selects picture. VOL programme for the sub a PR picture. MUTE SWAP PIP INPUT Coloured buttons VCR/DVD control buttons EXIT LIST MENU the main/sub Exchanges Selects the input window mode. These buttons images source are some when you have used for teletext already from any menu. selected DVD displays I/II Selects the sound output. 10 sleep timer. TE LETEXT 789 or or DVD * 0 TIME REVEAL FAV players VCR mode button. and returns to TV the programme table. a menu. SLEEP Sets the (only edit. video cassette recorders on-screen Selects picture in PIP/Doubel 456 Clears all Displays 123 for the sub models)or Programme Controls in PIP/Double window/POP mode. viewing ? INDEX MODE Selects the remote operating modes. INPUT TV TV POWER INPUT 1 TELETEXT These buttons BUTTONS For further are details, used for teletext. see DVD the 'Teletext' section. ARC VCR PIP SIZE POSTION PIP PR+ SWAP PIP INPUT TEXT 1 THUMBSTICK Allows you to (Up/Down/Left Right) OK VOLUME UP /DOWN Q.VIEW the navigate the on-screen menus system settings to your preference. Accepts your selection Adjusts the volume. adjust the current mode. LIST MENU Returns to the previously INTRODUC I/II SLEEP EXIT MUTE Switches the sound Programme displays or and PIP PR- viewed programme. on or off. OK Selects available programmes. UP/DOWN 0~9number Selects a programme. button Selects numbered items in a menu. Q.VIEW VOL FAV * Displays PR the selected favourite programme. No function MUTE 123 456 INSTALLING BATTERIES 789 * 0 TIME REVEAL FAV ? 1 ? Open the battery compartment polarity. cover on INDEX the back side and insert the batteries with correct ? Install two 1.5V alkaline batteries of AA type. Don't mix used batteries new batteries. with 11 INSTALLATION UNFOLDING THE BASE STAND (42PC1R * , 42PC3R * ) This feature is not available for all models. 1 INSTAL O 2 A 4 3 B Place the set with the screen facing down on a cushion Before unfolding the stand, please make sure two locks Pull the stand out as shown above in Figures 2 3. After unfolding the stand, please insert and tighten the C or (A) soft cloth as shown in Figure 1. on the bottom of the stand push outward. ~ screws in the holes When connecting cables to the set, do not disengage the lock (C). This may cause the set to fall, causing serious bodily injury and serious ! damage on the bottom of the stand. to the set. NOTE Figures shown here may be When closing First remove slightly the stand the screws of the stand. And then for different from your set. in the holes pull (B) two Hooks After folding, push two Locks (A) D A B storage on (D) the bottom of the stand bottom and fold the stand into the back of the set. 12 (B) of the stand bottom outward. BASIC CONNECTION(PDP TV models) These models have two cable arrangement methods Stand Arrange Stand 1 type as shown type. picture. INSTAL O 2 Hold the CABLE hands and to the stand 1 the cables type according push it MANAGEMENT as with both shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. 3 Reinstall the CABLE MANAGEMENT as shown. 13 INSTALLATION BASIC CONNECTION (LCD TV models) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the External equipment Connections section. 2 Install the CABLE MANAGEMENT as INSTAL O 3 shown. Bundle the cables using the supplied twister holder. HOW TO REMOVE THE CABLE MANAGEMENT (LCD Hold the CABLE MANAGEMENT with both hands and Hold the CABLE MANAGEMENT with both hands and ! G it pull pull TV models) upward. it downward. (Only 37/42LC3R * ) NOTE Do not hold the CABLE MANAGEMENT when you may be injured or the product moving the product. If the product is dropped, may be broken. SWIVEL STAND - This feature is not available for all models. - 14 The TV can the left or be right conveniently swiveled on its stand 30° to provide the optimum viewing angle. to HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING Set it up close to the wall so the product doesn't fall when it is over pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled in the forward direction. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don't climb on or hang from the product. 1 1 or 2 1 Use the eye-bolts or TV brackets/bolts to fix the 2 product to the wall as shown in the 2 Secure the wall brackets with the bolts the wall. Match the height (not provided as parts of the product, of the bracket that is mounted on must INSTAL O picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. bolts.) purchase separately) on the wall. 3 3 Use a sturdy rope (not provided safer to tie the rope ! G G G so as parts of the product, must purchase separately) product. to tie the product. It is it becomes horizontal between the wall and the NOTE When moving the product to another place undo the ropes first. product holder or a cabinet that is big and strong enough for the size and weight of the product. To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product. Use a 15 INSTALLATION STAND INSTALLATION The TV can The TV is be installed in various ways such designed to be mounted as on a wall, or on a desktop etc. horizontally. GROUNDING Power Supply Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Desktop For proper INSTAL O Short-circuit Breaker Pedestal Installation ventilation, allow a clearance of 4" on each side and from the wall. 4 inches 4 inches 4 inches 4 inches Wall Mount: Horizontal installation For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 4 inches 4 inches 4 inches 4 inches 4 inches Only 42PC1R * Remove two installing 16 , screws the wall 42PC3R * of the backside of the set before mounting bracket. CONNECTIONS & SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust An antenna cable and converter are antenna direction. not supplied. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket ANTENNA IN RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to UHF Antenna tighten. Outdoor Antenna Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) signal areas, to get better picture quality, install a signal amplifier to the antenna as shown to the right. In poor If signal antenna needs to be split for two TVs, signal splitter for connection. UHF VHF ANTENNA IN CONETIS&UP use an Signal Amplifier 17 CONNECTIONS & SETUP VCR SETUP To avoid picture Typically a screen noise frozen still from picture may remain visible When leave (interference), on the a an adequate VCR. If the 4:3 distance between the VCR and TV. picture format is used; the fixed images connecting with an ANTENNA IN socket the sides of the antenna Connect the ANT OUT socket of the VCR to the 1 on screen. 2 VCR the set. on ANT IN IN S-VIDEO OUT ANT OUT AV1 Connect the antenna cable to the A N T I N 2 OUTPUT SWITCH AV2 34 (R) AUDIO AC IN antenna socket of the VCR. 1 Press the PLAY button 3 the VCR and match on the appropriate programme VCR for viewing. CONETIS&UP When connecting ANTENNA N between the TV and with a RCA cable VCR jacks between TV and VCR. Match the jack colors (Video yellow, Audio Left white, and Audio Right red) ANT IN Connect the AUDIO / VIDEO 1 = IN S-VIDEO OUT ANT OUT OUTPUT SWITCH = 34 (AUDI(L)VEO = 1 2 video tape into the VCR and press PLAY VCR. (Refer to the VCR owner's manual.) 3 Select AV3 Insert a on the RGB IN input using source the INPUT button on RGB AUDIO (PC/DTV) (RGB/DVI) the remote control. AN3 CON RS 232C N OL&SE VCE MONO - If connected to AV IN4 (except ! G 18 , select AV4 SVDEO input V DEO AUD O source. 42PC3R * 32/37/42LB2R * ) , NOTE If you have the set. a mono VCR, connect the audio cable from the VCR to the AUDIO L MONO jack of (L) VIDEO When connecting with a Euro Scart Back TV AV1 AV2 Connect the Euro scart socket of the VCR to the AV1 1 Euro scart socket Insert 2 VCR. on the set. video tape into the VCR and press PLAY (Refer to the VCR owner's manual.) a on the ANTENNA N 1 Select AV1 3 input source with using the INPUT button on the remote control. - If connected to A V 2 input ! Euro scart socket, select AV 2 source. (R) AUDIO/ VIDEO AUDIO (L) VCR NOTE G If the S-VIDEO(Y/C) the S-Video2 mode. G If you want to When use signal connecting S-Video through the Euro scart socket 2 the EURO scart cable, you have to Connect the S-VIDEO 1 is received input with an output of the use the improved; compared to normal you must Connect the audio input jacks 3 Insert VCR. 4 VCR to the picture quality is composite (RCA cable) input. ANT IN outputs of the S-VIDEO ANT OUT OUT O PUT SCH input (AUDI(L)VEO 1 with the remote control. CONETIS&UP VCR to the AUDIO video tape into the VCR and press PLAY (Refer to the VCR owner's manual.) source VCR IN the set. a Select A V 3 on on to shielded Euro scart cable. 4 2 change S-Video cable the set. The on signal (AV2), using on 2 the RGB IN RGB AUDIO (PC/DTV) (RGB/DVI) the I N P U T button A IN3 RS 232C N CON ROL &SERV CE () MONO SVDEO ! G V DEO AUD O NOTE If both S-Video and VIDEO sockets have been connected to the S-VHS VCR only the S-Video can simultaneousiy. be received. 19 CONNECTIONS & SETUP EXTERNAL EQUIPMENT CONNECTIONS 1 Connect the AUDIO/VIDEO external equipment. low, Audio Left = jacks between TV and jack colors (Video yel Audio Right red). Match the white, and AVN4 = = R AUDIO L MONO 2 Select AV4 on - 3 input the remote source with control(except 42PC3R If connected to AV IN3 Operate external the using the input, INPUT button * , VIDEO 32/37/42LB2R * ). select AV3 input corresponding external equipment. equipment operating guide. 1 source. Refer to Camcorder Video Game Set CONETIS&UP 20 AUDIO RL VIDEO DVD SETUP When connecting with component cable a DVD 1 Connect the video outputs (Y, PB, PR) of the the COMPONENT IN VIDEO 2 Connect the audio jacks outputs of the COMPONENT IN AUDIO on 4 Select Component input source with button on the remote control. player, insert a Refer to the DVD player's 2 the set. DVD. manual for (L) the set. VARIABLE AUDIO using the OUT INPUT COMPONENT N VIDEO 5 AUDIO 1 jacks Turn the DVD (R) R DVD to the 3 on on B DVD to operating AUD O instructions. ! NOTE Component Input ports G get better picture quality, connect a DVD player to the component input ports as To shown below. Component ports Video on When 1 connecting with a YPBPR the TV on output ports DVD player Y Pb Pr Y B-Y R-Y Y Cb Cr Y PB PR Euro Scart AV1 AV2 CONETIS&UP Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the set. ANTENNA IN 2 Turn on the DVD player, insert a DVD. 1 3 Select AV1 input source with using the INPUT button on the remote control. - If connected to AV2 Euro scart socket, select AV2 input source. DVD AUDIO/ VIDEO ! G (R) AUDIO (L) NOTE Please use the shield scart cable. 21 CONNECTIONS & SETUP When connecting with S-Video cable a DVD Connect the S-VIDEO 1 S-Video input input jacks on DVD to the (R) AUDIO (L) outputs of the DVD to the A U D I O the set. 2 RGB IN 3 Turn 4 Select AV3 on the DVD input When player, insert source with a DVD. using RGB AUDIO (PC/DTV) (RGB/DVI) A the INPUT button () MONO S- player's connecting IN3 RS-232C N (CON ROL &SERV CE) the remote control. Refer to the DVD 5 CONETIS&UP on manual for with operating EO V DEO AUD O instructions. HDMI cable a HDMI IN 2 Connect the HDMI 1 jack on output of the DVD to the HDMI IN REMOTE CONTROL IN the set. Select HDMI1 2 DVI the I N P U T button or on HDMI2 input source with 1(DV) using the remote control. 1 Refer to the DVD 3 player's manual for operating instructions. DVD HDMI OUTPUT ! G G NOTE TV 22 receive the video and audio signal simultaneously with using a HDMI cable. If the DVD supports Auto HDMI function, the DVD output resolution will be to G can S-VIDEO the set. on Connect the audio 2 output of the automatically set 1280x720p. If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the DVD to 1280x720p. 1 SETUP STB(SET-TOP BOX) Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV receive can When receive with connecting a component cable Box Digital Set-top B 1 Connect the video set-top box to the 2 COMPONENT IN VIDEO Connect the audio Turn jacks digital set-top box. (Refer for the digital set-top box.) on manual the AUDIO (R) (L) jacks on the set. output of the digital set-top box the COMPONENT IN AUDIO 3 R outputs (Y, PB, PR) of the digital on to 1 2 the set. VARIABLE to the owner's AUDIO OUT COMPONENT N 4 Select Component input source with button on the remote control. ! using the VIDEO Signal * When connecting Connect the DVI HDMI1(DVI) with Connect the audio jack Turn on 4 I N P U T button No Yes Yes Yes Yes RGB IN RGB (PC DTV) AUDIO (RGB/DVI) 2 outputs of the set-top box DVI on to the DMN on input (DV to the RS 232C N CONTROL &SERVICE ) the set. digital set-top box. (Refer the digital set-top box.) Select HDMI1 No HDMI to DVI cable a the manual for (DTV) No the set. on HDMI2 Yes output of the digital set-top box IN AUDIO(RGB DVI) jack 3 RGB-DTV HDMI1/DVI (DTV) Component 480p/576p/720p/1080i/1080p(47LB2R only) 2 AUD O NOTE 480i/576i 1 INPUT source 2 to the owner's with using CONETIS&UP 1 the the remote control. Digital Set-top DVI OUTPUT ! G G AUDIO (L) Box NOTE If the digital set-top is necessary. G (R) box has a DVI output and no HDMI output, a separated audio connection If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will be automatically set to 1280x720p. If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p. 23 CONNECTIONS & SETUP When connecting with D-sub 15 a pin cable Digital Set-top Connect the RGB 1 output of the digital set-top box the RGB IN (PC DTV) jack on AUDIO 3 Turn on outputs of the set-top box (RGB DVI) jack on the set. the to (R) AUDIO (L) RGB-DTV OUTPUT the set. Connect the audio 2 Box digital set-top box. (Refer to digital set-top box.) to the 2 1 the owner's manual for the RGB IN AUO ) DMN (CD (RGB DVI) 2 Select RGB-DTV 4 button on input source with using the INPUT AVIN3 1DV) the remote control. RS 232C N CON ROL &SERV CE MONO () S-VIDEO When CONETIS&UP 1 connecting a output of the digital set-top box the HDMI IN on jack DMN to 2 the set. 1 REMOTE CONTROL IN DVI the I N P U T button or on HDMI2 input source with (DV) using the remote control. 1 3 Turn on the digital set-top box. (Refer digital set-top box.) to the owner's manual for the Digital Set-top Box HDMI OUTPUT ! G G NOTE TV can If the receive the video and audio signal simultaneously with using digital set-top box supports Auto HDMI function, output automatically set to 1280x720p. a HDMI cable. resolution of the digital set-top will be G If the digital set-top appropriately. set-top box 24 AUDIO HDMI cable Connect the HDMI Select HDMI1 2 with VIDEO to To box does not support Auto HDMI, you need to set the output resolution get the best picture quality, adjust the output resolution of the digital 1280x720p. box PC SETUP This TV provides Plug When and Play capability, meaning with connecting that the PC D-sub 15 a Connect the RGB (PC DTV) jack output of the on settings. pin cable AUDIO 1 to the TV's adjusts automatically PC RGB OUTPUT PC to the RGB IN the set. 2 2 1 Connect the audio (RGB DVI) jack outputs of the PC to the AUDIO on the set. RGB IN 3 Turn the PC and the set. on AUO ) DMN (CD (RGB DVI) 2 AVIN3 4 Select RGB-PC button When on input source with using the INPUT 1 DV) RS 232C N CON ROL &SERV CE MONO () the remote control. connecting with S-VIDEO VIDEO AUDIO HDMI to DVI cable a RGB IN 1 Connect the DVI output of the PC to the HDMI1(DVI) IN jack on the set. AUDIO V) (RGB/DVI) 2 1 2 RGB (PCD DMN DV) RS 232C N CON ROL &SERV CE Connect the audio (RGB DVI) jack outputs of the PC to the AUDIO on the set. 1 3 Turn 4 Select HDMI1 on 2 the PC and the set. DVI I N P U T button on input source with using the the remote control. PC ! CONETIS&UP DVI OUTPUT AUDIO NOTE G If the PC has G If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of PC graphics card's output resolution to a DVI output and no HDMI output, a separated audio connection is necessary. 1024x768, 60Hz. 25 CONNECTIONS & SETUP ! NOTE G To G enjoy vivid and sound, connect picture a PC to port of the Avoid set keeping a fixed image on the set's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. the RGB (PC/DTV) HDMI IN or port of the set; change the resolution output of PC accordingly. might be There noise tion, vertical pattern, mode. according contrast or to some resolu- brightness in PC G In 26 or 42/50PC1R * 42PC3R * models, , recommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality. G We recommend using 1360*768, 60Hz (37/42LC2R*, 37/42LC25R*, 37/42LC3R*, they provide the best picture quality. (If the resolution of PC is Audio G We UXGA, there will be recommend (47LB2R ) * for the PC mode, picture quality. the picture using 1920*1080, 60Hz no on they provide set.) the best cable from the monitor PC to the RGB signal output (PC/DTV) port cable from the HDMI port on of the output port the set. the audio cable from the PC to the (Audio cables are not set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when input the set. on included with the using this set. protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally. G If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB (PC/DTV) or HDMI IN to display G DDC the PC the set. on on the PC does graphic output analog and RGB set the set to either digital simultaneously, RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on video 32/37/42LB2R * ) for the PC mode, over the signal of the PC to the HDMI IN G we or G Connect the PC mode into another resolu- Change change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. tion CONETIS&UP the the set. G Connect PC to G G Connect G If card card if you use a When you use be noise might using under 5m picture quality. a HDMI to DVI cable. too on long the RGB-PC screen. of the cable. It cable, there We recommend provides the best Supported Display Resolution (42/50PC1R 42PC3R ) Supported Display Resolution (37/42LC2R *, 37/42LC25R *, 37/42LC3R *, 32/37/42LB2R ) RGB[PC] / HDMI[PC] mode * Resolution 720x400 640x480 800x600 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.469 70.08 31.469 59.94 37.500 75.00 37.879 60.31 75.00 46.875 832x624 Horizontal Vertical Frequency(Hz) 640x350 31.468 70.09 720x400 31.469 70.08 31.469 35.00 59.94 66.66 640x480 37.861 72.80 37.500 75.00 31.5 60.00 37.799 39.375 70.00 75.00 31.5 60.00 37.799 39.975 70.00 75.00 832x624 49.725 74.55 800x600 37.897 48.077 60.31 72.18 75.00 74.55 48.363 848x480 852x480 1024x768 56.476 60.023 1280x768 47.693 59.99 1360x768 47.700 60.00 1366x768 47.700 60.00 Resolution Supported Display (47LB2R ) 46.875 * RGB[PC] / HDMI[PC] mode Horizontal Vertical Frequency(KHz) Frequency(Hz) 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47. 776 59.87 59.699 59.939 1360x768 47. 72 59.799 1366x768 47.7 60 1280x1024 63.668 59.895 65.317 59.978 1600x1200 75 60 1920x1080 66.587 59.934 1920x1200 74.038 59.950 Resolution 1280x960 (HDMI[PC] only) 1400x1050 (RGB[PC] only) * Frequency(KHz) Resolution 49.725 60.00 70.06 75.02 , RGB[PC] / HDMI[PC] mode * 48.363 1024x768 56.476 60.023 60.00 70.06 75.02 1280x1024 63.981 60.02 1280x768 47.693 60.091 59.99 47.700 59.625 60.00 75.02 47.700 60.00 59.625 75.02 1360x768 1366x768 74.93 CONETIS&UP 27 CONNECTIONS & SETUP TURNING THE TV ON If your TV will be turned on, you will be able to its features. use INPUT TV TV POWER INPUT DVD Turning on ARC the TV TEXT PIP PR- 1 connect power cord First, standby mode to turn TV PR DE button on PIP SIZE POSTION PIP PR+ SWAP PIP INPUT correctly. At this moment, the TV switches to In VCR the TV POWER, T V, INPUT, PR + on, or -, standby mode. press the press the , INPUT, Number(0~9)button the remote control and then the TV will switch on LIST on. I/II MENU EXIT SLEEP OK Volume Adjustment Q.VIEW 1 Press the VOL+- button to 2 If you want to switch the sound off, press the MUTE button. 3 You adjust the volume. VOL PR MUTE CONETIS&UP 123 456 or can cancel this function by pressing the MUTE, VOL + - 789 III button. * 10 TIME REVEAL FAV ? Programme 1 INDEX selection Press the PR+gramme number. or NUMBER button to select a pro- ! G NOTE If you intend to be away on vacation, disconnect the power plug from wall power outlet. 28 On-Screen Menu Installation 1 guide menu Language / Country appears Press the DE on TV screen Selection when it is turned on (Option) for the first time. F G button and then, OK button to select your desired F G button and then, O K button to select your country. language. Press the DE 2 If you 1 want to change Language Country Press the MENU button and then Special be shown menus can 3 DE button to select the menu. Press the G button and then 2 use selection on the use screen DE button to select in the selected Or, Press the G button and then use Press the G button and then DE button to select your desired language or use DE button to select Press the OK button 5 Press the E X I T button to return to normal TV G The Country. country. 4 ! Language. language. CONETIS&UP viewing. NOTE If you don't finish set up Installation Guide by pressing EXIT butor time out of OSD (On Screen Display) display, it will continuously ton appear until completing set up whenever the set is turned on. G If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. G Arab and Hebrew according added to Country of Installation Guide to the countries which using Arab and Hebrew languages. are 29 SPECIAL FUNCTIONS PIP (PICTURE-IN-PICTURE) / DOUBLE WINDOW / POP INPUT PIP lets you view 2 different inputs (sources) on your TV at the same time. One source will be large, and the other will show a smaller inset Double window mode to be shown sources source is given on the DVD source ARC screen the TV into 2, screen 2 allowing at the same It's not available to use VCR TEXT picture PIP PR- PIP SIZE POSTION PIP PR+ SWAP PIP INPUT time. Each screen. LIST Watching PIP/Double Window/POP Press the PIP button to TV POWER INPUT image. splits half the TV screen access the sub picture. Each press of PIP changes the PIP options as MENU I/II shown below. POP in 47LB2R * models. PIP Mode DW1 Mode DW2 Mode POP Mode PIP Off SPECIALFUNTO Programme Selection for Sub Picture Press the P I P P R + The sub Input picture - button to select a programme for the sub picture. programme selection is not available in TV mode for main and sub picture simultaneously. Source Selection for Sub Picture Press the P I P I N P U T button to select the Each press of PIP INPUT button is TV input pressed, AV1 source each input for the sub source picture. for the sub AV2 S-Video2 (except 32/37/42LB2R ) is picture displayed as AV3 * HDMI2 HDMI1/DVI RGB AV4 Component (except Sub Picture Size Repeatedly 30 Adjustment (PIP mode press the SIZE button to select the desired sub only) picture size. 42PC3R * 32/37/42LB2R * ) , shown below. Moving the Sub Picture Press the POSITION button achieved. The sub Adjusting picture PIP (PIP repeatedly moves mode until desired only) position is clockwise. Transparency (PIP mode only) 1 Press the MENU button and then DE button to select the SCREEN 2 Press the G button and then DE button to select PIP 3 Press the G button and then F 4 Press the EXIT button to return to normal TV Swapping G button to adjust exchange Transparency. Transparency. viewing. between main and sub Press the S W A P button to PIP menu. the main and sub pictures pictures. SWAP Main Picture POP Sub Picture (Picture-out-of-Picture: Programme Scan) It's not available to use POP in 47LB2R * models. SPECIALFUNTO Use POP to search the programmes of all the memorized channels one-by-one on the 3 POP screen display, (while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen. When watching TV for main picture, same TV programme for sub pictures are scanned. 31 SPECIAL FUNCTIONS TELETEXT Teletext (or TOPtext) is an optional function, therefore only a setwith the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV consists of can support the SIMPLE, number of pages which FASTEXT are more modern methods a TOP and FASTEXT SIMPLE (standard teletext) by directly entering the corresponding page number. TOP and allowing quick and easy selection of teletext information. are systems. selected Switch on/off Press the T E X T button to switch to teletext. The initial page Two page numbers, TV station name, date and time are last page appears on the screen. displayed on the screen headline. The first page number or indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. The previous mode reappears. SIMPLE Text A Page selection Enter the desired page number a wrong number, you The PR+ SPECIALFUNTO 32 - button must can as a three complete digit the three be used to select the number with the NUMBER buttons. If digit number and then re-enter the preceding or following page. during selection you press correct page number. TOP Text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block group page selection 1. With the blue button you can progress from block to block. yellow button to proceed to the next group with automatic overflow to the next block. 2. Use the 3. With the green button you Alternatively the P R 4. The red button A Direct page Corresponding + can button permits proceed can to the next existing page with automatic overflow to the next group. be used. to return to previous selection. Alternatively the P R - button can be used. selection to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. FASTEXT The teletext pages are colour coded sponding coloured button. APage along the bottom of the screen and are selected by pressing the corre- selection i 1. Press the INDEX button to select the index page. 2. You can select the pages which are colour coded along the bottom line with the same coloured buttons. 3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. 4. The PR+ button can be used to select the preceding or following page. - Special A Teletext Functions REVEAL Press this button to display concealed information, such as solutions of riddles Press this button again to remove the information from the display. A or puzzles. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDATE the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page. Displays A TIME SPECIALFUNTO When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the G or NUMBER buttons. Press again to exit this function. RED/GREEN, F A HOLD the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again. Stops 33 TV MENU ON SCREEN MENUS SELECTION AND Your TV's OSD ( On Display ) Screen may differ slightly from what is shown in this manual. 1 Press the MENU button and then D / E button to 2 Press the G button and then D / E button to select 3 Change You the setting STATION G PICTURE SOUND TIME Menu of to the can move an higher a menu each menu. item. or STATION Auto programme PICTURE Manual programme G TIME Favourite prog. SPECIAL SPECIAL SCREEN SCREEN Prev. Auto PICTURE Manual SOUND TIME SPECIAL SCREEN G Reset PICTURE menu config. config. XGA Mode STATION SSM PICTURE AVL SOUND ARC PIP Advanced Prev. Menu STATION PSM CSM SOUND Programme edit STATION Menu menu display pull-down menu with F / G button. by pressing the OK or MENU button. item in the sub level ADJUSTMENT G TIME Transparency Balance SCREEN Menu SCREEN Prev. SOUND menu STATION Language STATION Clock PICTURE Country PICTURE Off time TIME SPECIAL G SCREEN 0 Speaker SPECIAL Reset Prev. SOUND menu Child lock SOUND ISM Method TIME G Low Power SPECIAL Set ID SCREEN menu On time Auto sleep Demo TVMENU Menu Prev. Menu SPECIAL ! Prev. TIME menu menu NOTE (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. b. In this manual, the OSD (On Screen Display) may be different from your TV's because it is just example to help the TV operation. (The OSD mainly use pictures for the 42/50PC1R 42PC3R .) c. In the teletext mode, menus are not displayed. d. In some models, XGA will display on the SCREEN menu. a. The OSD * * , e. It's not available to use ISM Method and Low Power in LCD TV models. f. It's available to use Index in 32/37/42/47LB2R * . 34 TV MENU Setting up TV stations AUTO PROGRAMME TUNING LIST MENU I/II EXIT SLEEP be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/- or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Up to 100 TV stations can OK All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. Q.VIEW VOL PR MUTE 1 Press the MENU button and then DE button to select the STATION Auto programme Manual programme menu. Programme edit Favourite prog. 2 Press the G button and then DE button to select Auto programme. 3 Press the G button and then DE button to select 4 G button to select a TV system menu; Press the F L : SECAM L/L' (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) M : (USA / Korea / Philippines) (option) 5 Press the DE button to select 6 Press the F beginning G button or System. 1 Auto programme G BG System Manual programme Storage Programme edit Start from 1 Favourite prog. Storage from. NUMBER buttons to select the programme number. If you number under 10 is entered with a use NUMBER 2 buttons, any ~ 7 numeric '0' in front of it, Auto programme i.e.'0 5' for 5. Name 7 Press the DE button to select Start. 8 Press the G button to C05 System BG Storage 5 50% begin auto programming. All receivable stations are stored. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. To Menu Stop 8 TVMENU programming, press the MENU button. programming is completed, the Programme edit appears on the screen. See the Programme edit section stop auto When auto menu to edit the stored programme. 9 Press the EXIT button to return to normal TV viewing. 35 TV MENU Setting up TV stations MANUAL PROGRAMME TUNING LIST MENU I/II EXIT SLEEP Manual programme lets you manually tune and arrange the stations in whatever order you desire. OK Q.VIEW VOL 1 Press the MENU button and then DE button to select the STATION menu. 2 Press the G button and then DE button to select Manual PR programme. 3 Press the G button and then D 4 Press the FG button or E button to select Auto programme Storage. Manual programme Programme edit NUMBER buttons to select the Favourite prog. desired programme number (0 to 99). If you use NUMBER buttons, any number under 10 is entered with a numeric '0' in front of it, i.e. '0 5' for 5. TVMENU 36 5 Press the DE button to select 6 G button to select a TV system menu; Press the F L : SECAM L/L' (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) M : (USA / Korea / Philippines) (option) System. Auto programme Manual programme Programme edit Favourite prog. 5 Storage G BG System Band V/UHF Channel 5 Fine Search 7 Press the DE button to select Band. 8 Press the F 9 Press the DE button to select Channel. Name C05 G button to select V/UHF or Cable. G select the desired programme number with the F button or number buttons. If possible, select the programme number directly with the number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '0 5' for 5. 10 You 11 Press the DE button to select Search. 12 1 can Press the FG button to commence searching. If a station is found the search will stop. 13 Press the OK button to store it. 14 To store another station, 15 Press the EXIT button to return to normal TV repeat steps 3 to 13 . viewing. Off Booster 2 ~ 12 FINE TUNING LIST Normally fine tuning is only necessary if reception is poor. MENU I/II EXIT SLEEP OK Q.VIEW VOL PR MUTE 123 1 Press the MENU button and then DE button to select the STATION 2 menu. Press the G button and then DE button to select Manual Auto programme programme. 3 4 Manual programme Programme edit Press the G button and then DE button to select Fine. Press the FG button to to fine tune for the best Favourite prog. picture and sound. 5 Press the OK button to store it. 6 Press the EXIT button to return to normal TV 1 viewing. Auto programme Storage Manual programme System Programme edit Band Favourite prog. Channel Fine 5 BG V/UHF 5 FG Search Name C05 Off Booster Store 2 ~ 5 TVMENU 37 TV MENU Setting up TV stations ASSIGNING A STATION NAME LIST You can assign a station name with five characters to each programme number. MENU I/II EXIT SLEEP OK Q.VIEW VOL PR MUTE 123 1 Press the M E NU button and then DE button to select the STATION 2 menu. Press the G button and then DE button to select Manual programme. Auto programme Manual programme 3 Press the G button and then DE button to select Name. 4 Press the G button and then DE button. You blank, 5 +, - 7 Favourite prog. can use a ,thenumber0to9andthealphabetAtoZ. Press the F G button to select the your choice of the second 6 Programme edit position character, and and make 1 so on. Press the O K button to store it. Press the EXIT button to return to normal TV Auto programme Storage Manual programme System Programme edit Band Favourite prog. Channel 5 BG V/UHF 5 Fine viewing. Search Name G C05 Off Booster Store Edit G 2 TVMENU 38 ~ 6 BOOSTER (Option) LIST MENU I/II EXIT In some with B Booster is models, o o s t e r can perform an function. optional Only a SLEEP set this function. OK If the is poor at the reception Booster to On fringe area of TV signal, select . Q.VIEW VOL PR MUTE 123 Auto programme 1 2 Manual programme Press the MENU button and then DE button to select the STATION Programme edit menu. Press the G button and then Favourite prog. use DE button to select Booster. 1 3 Press the G button and then use F G button to select Auto programme On or Off. Manual programme Storage System Programme edit Band Favourite prog. Channel 5 BG V/UHF 5 Fine Search 4 Press the EXIT button to return to normal TV viewing. Name C05 Booster FG on Store 23 TVMENU 39 TV MENU Setting up TV stations PROGRAMME EDIT PIP PR- This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. PIP PR+ LIST PIP INPUT SWAP MENU I/II EXIT SLEEP OK Q.VIEW VOL 1 2 PR Press the M E N U button and then DE button to select the STATION menu. Press the G button and then DE button to select Programme edit. Auto programme 3 Press the G button to A Deleting a display the Programme edit Manual programme menu. Programme edit Favourite prog. programme 1.Select a programme to be deleted with the F G button. DE 2.Press the RED button twice. The selected programme is deleted, all the following are programmes A Copying 1.Select a a shifted up one position. programme programme to be copied with the DE button. Auto programme 2.Press the GREEN button. All the A following Moving 1.Select a a programmes 1 FG are shifted down one position. Manual programme Programme edit To set G Favourite prog. programme programme to be moved with the DE FG button. 2.Press the YELLOW button. 3.Move the programme to the desired programme number F G button. with the DE 4.Press the YELLOW button again to release this function. 2 programme number 1.Select a programme number to be skipped with the DE FG button. A TVMENU Skipping a Programme edit 2.Press the BLUE button. The skipped programme turns to blue. 3.Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the DE button during normal TV viewing. If you want to select the skipped pro gramme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. 40 Press the EXIT button to return to normal TV viewing. C02 5 S15 1 C04 6 S16 2 C05 7 S17 3 C06 8 S18 4 S14 9 S19 Delete Copy Move Skip Menu 4 0 Prev. 3 FAVOURITE PROGRAMME LIST I/II MENU EXIT SLEEP This function lets you select your favourite programmes OK directly. Repeatedly press the FAV button to select stored favourite programmes. Q.VIEW VOL PR MUTE 123 456 1 Press the MENU button and then DE button to select the STATION 789 menu. 10 * 2 FAV Press the G button and then DE button to select Favourite prog. Auto programme Manual programme 3 Press the G button. 4 Press the DE button to select 5 Select Programme edit a Favourite prog. - - - - - - - -. G button or desired programme with the F number under 10 is entered with Any NUMBER buttons. a numeric '0'in front of it, i.e.' 05 'for5. 6 To store another programme, You can repeat steps 4 1 to 5. store up to 8 programmes. Auto programme Manual programme 7 Press the EXIT button to return to normal TV viewing. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Programme edit Favourite prog. G 2~5 TVMENU 41 TV MENU Setting up TV stations CALLING THE PROGRAMME TABLE LIST check the programmes stored in the memory displaying the programme table. You can by MENU EXIT I/II SLEEP OK Q.VIEW A Displaying programme Press the LIST button to VOL table display the Programme The programme table appears on the a. menu. MUTE screen. 123 One programme table contains ten programmes ! table as below. NOTE You may find to be some skipped by blue programmes. auto programming They or have been set up in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is A Selecting Select a a programme in no station name assigned. the programme table programme with the DE F G button. Then press the OK button. The set switches to the chosen programme number. A Paging through There are Pressing a programme table 10 programme table pages in which contain 100 the DE F G button repeatedly turns Press the LIST button to return to normal TV TVMENU 42 PR viewing. programmes. the pages. Programme list 0 C02 5 S15 1 C04 6 S16 2 C05 7 S17 3 C06 8 S18 4 S14 9 S19 TV MENU PSM Picture Menu Status (Picture Memory) LIST Dynamic Select this Standard The most Mild Select this option Select this option User 1/2 option to display with and natural general to to display SLEEP status. image. the user-defined setting. a I/II sharp image. mild display use a screen with MENU EXIT OK Q.VIEW VOL PR MUTE 1 Press the MENU button and then DE button to select the PICTURE menu. PSM CSM Advanced 2 Press the G button and then DE button to select PSM. 3 Press the G button and then DE button to select Reset Intelligent Eye (only 32/37/42/47LB2R ) Dynamic, * Standard, Mild, User 1, or 1 User 2. PSM CSM G Dynamic Standard Mild 4 Press the E X I T button to return to normal TV viewing. User 1 Advanced User 2 Reset ? PSM adjusts the TV for the best picture Select the preset value in the PSM programme ? When appearance. menu based on the category. adjusting User options (contrast, brightness, colour, and sharpness, tint) manually, PSM automatically changes ? Picture to User . options Intelligent Eye (only 2~3 TVMENU 32/37/42/47LB2R * ), Dynamic, Standard, Mildand U ty ? s e r are at the preset and programmed for good picture quali- factory and cannot be changed. When the Intelligent eye function is on, the most suitable pic ture is automatically adjusted according to the surrounding con ditions. (only 32/37/42/47LB2R ) * 43 TV MENU Picture Menu PICTURE ADJUSTMENT (PSM-User option) LIST Contrast Adjusts the difference the picture. Brightness Increases or between the light and dark levels in decreases amount of white in the your MENU EXIT I/II SLEEP pic- OK ture. Colour Adjusts intensity Sharpness Adjusts the and dark er Tint the of all colours. level of crispness in the areas of the picture. edges between the light Q.VIEW The lower the level, the soft- image. Adjusts the balance between red and green levels. PSM CSM Advanced Reset Press the M E N U button and then DE button to select 1 the PICTURE menu. 1 Press the G button and then DE button to select PSM. 2 PSM Dynamic CSM Standard Mild Press the G button and then DE button to select User 3 1, or desired G User 2 Reset User 2. Press the G button and then D 4 User 1 Advanced E button to select the picture option (Contrast, Brightness, Colour, Sharpness, or Tint). 23 5 Press the F 6 Press the EXIT button to return to normal TV G button to make appropriate adjustments. viewing. User 1 Contrast TVMENU 100 Brightness 50 Colour 50 Sharpness 50 Tint 0 G G R 45 ! NOTE You can't 44 adjust, colour, sparpness and tint in the RGB-PC, HDMI-PC mode to the levels you prefer. CSM (Colour Status Memory) LIST MENU EXIT To initialize values Normal Choose warm see (reset to default settings), I/II SLEEP select the option. one of three automatic colour to enhance hotter colours such less intense colours with more as OK adjustments. red, or Set to set to cool to blue. Q.VIEW VOL PR MUTE 123 1 Press the MENU button and then DE button to select the PICTURE menu. 2 Press the G button and then DE button to select CSM. 3 Press the G button and then DE button to select CSM either Cool, Normal, Wa r m Advanced PSM , or User. Reset 4 Press the EXIT button to return to normal TV viewing. 1 PSM CSM G Cool Normal Advanced Warm User Reset 23 TVMENU 45 TV MENU Picture Menu MANUAL COLOUR TEMPERATURE LIST CONTROL (CSM - User Option) MENU EXIT I/II SLEEP OK You can adjust red, green, blue to any colour temperature you prefer. Q.VIEW VOL PR MUTE 123 1 Press the MENU button and then DE button to select the PICTURE menu. 2 Press the G button and then DE button to select CSM. 3 Press the G button and then DE button to select User. User 4 Press the G button and then DE button to select Red, Green, TVMENU 46 or Red 0 Green 0 Blue 0 G Blue. 5 Press the FG button to make 6 Press the EXIT button to return to normal TV appropriate adjustments. viewing. 3~5 FUNCTION XD is LG electronic's play a real HD ing algorithm. source unique picture improving technology through an advanced digital signal LIST to dis- MENU I/II EXIT SLEEP processOK This menu PSM is activatived after selecting the User1 or User2 of . Q.VIEW VOL PR MUTE Press the MENU button and then DE button to select 1 the PICTURE menu. 2 Press the G button and then DE button to select XD. 3 Press the G button and then DE button to select PSM CSM Advanced Reset Manual. 4 Press the G button and then DE button to select X D Contrast, XD Colour, XD NR or MPEG NR. 1 Press the FG button to make 5 appropriate adjustments. PSM CSM 6 Press the EXIT button to return to normal TV viewing. G Advanced Reset Auto Manual XD Contrast On ? XD Contrast according ? X D C o l to the o r matically : Optimizing brightness the contrast auto-matically of the reflection. Off Adjusting the colors of the reflection autoreproduce as closely as possible to the nat- XDNR: does not ? the noise up to the the original picture. Removing damage MPEG NR appear on MPEG NR 0 23 ural colors. ? On XD NR : to XD Colour :To reduce the the screen picture point where it noise which may during watching the TV. (It's not available to use this function in HDMI, Component(except 480i/576i), RGB-PC modes.) TVMENU 47 TV MENU Picture Menu ADVANCED LIST When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the I/II MENU EXIT SLEEP screen. OK TruM- It is used for the best motion blur or judder without any quick image or Film picture quality when you enter a Source. Q.VIEW VOL Cinema- function works in the following TV, AV1, AV2, 32/37/42LB2R * ), AV3, AV4(except S-Video2(except PR mode: MUTE 42PC3R * 32/37/42LB2R * )or , Component 480i/576i. Black Level- function works in the following mode: AV(NTSC), HDMI[PC/DTV]. PSM CSM 1 Advanced Press the MENU button and then DE button to select the PICTURE Reset menu. 2 Press the G button and then DE button to select Advanced. 3 Press the G button and then DE button to select Cinema(or TruM) or 1 Black Level. PSM CSM 4 Press the F G button to select On, Off, Low or high. Advanced Reset G Cinema Off Black level ? TVMENU 48 5 Realizing the black level High or Low automatically. Auto to ? L ? High o w : The reflection of the : : of the screen The reflection of the screen and set it Auto gets darker. screen gets brighter. Press the EXIT button to return to normal TV viewing. 23 RESET LIST MENU EXIT I/II SLEEP OK 1 Press the MENU button and then DE button to select the PICTURE menu. Q.VIEW 2 Press the G button and then DE button to select Reset. 3 Press the G button to initialize the VOL PR MUTE ? Returns to the default at the adjusted value. settings PSM, CSM, XD, Advanced factory. PSM CSM Advanced Reset 1 PSM CSM Advanced Reset G To set 23 TVMENU 49 TV MENU SSM You Sound Menu Status (Sound can Memory) select your preferred sound setting; Surround MAX, Sports and you can also adjust the sound equalizer. Flat, Music, Movie of the frequency SSM lets you LIST MENU enjoy EXIT SLEEP the best sound without any special adjustappropriate sound options based ment because the TV sets the on Surround MAX for good sound , Flat quality MAX Flat The most Music Select this tening o r t s , Music at the , Movie and factory option commanding option to and SSM automatically Sports are not are preset Q.VIEW adjustable. VOL PR to sound realistic. and natural audio. enjoy the original sound when lis to the music. Select this Movie equalizer manually, Select this Surround User OK the programme content. When adjusting sound switches U s e r. S p I/II or option to enjoy Select this option to watch Select this option to use sublime sound. SSM AVL sports broadcasting. Balance the user-defined audio set- 0 Speaker tings. 1 SSM 1 Press the MENU button and then DE button to select the SOUND G Balance Surround MAX Flat AVL 0 Music Movie menu. Speaker Sports User 2 3 Press the G button and then DE button to select SSM. Press the G button and then DE button to select Surround MAX, Flat, Music, Movie, TVMENU 50 4 Sports, Press the EXIT button to return to normal TV or User. 23 viewing. SOUND FREQUENCY (SSM User - ADJUSTMENT option) LIST MENU I/II EXIT Adjust the sound SLEEP OK equalizer. Q.VIEW VOL 1 PR Press the MENU button and then DE button to select the SOUND MUTE menu. 2 Press the G button and then DE button to select SSM. 3 Press the G button and then DE button to select User. SSM AVL 4 Press the G button. Balance 0 Speaker 5 Select Make 6 a sound band appropriate by pressing the DE button. sound level with the FG button. Press the EXIT button to return to normal TV viewing. 1 SSM G Surround MAX Flat AVL Balance 0 Music Movie Speaker Sports User 2 ~ 4 User 120Hz FG 200Hz TVMENU 500Hz 1.2KHz 3KHz 7.5KHz 12KHz 5 51 TV MENU AVL Sound Menu (Auto Volume Leveler) LIST MENU EXIT AVL automatically keeps change programmes. on an equal volume level even I/II SLEEP if you OK Q.VIEW 1 the SOUND 2 VOL Press the M E N U button and then DE button to select PR menu. Press the G button and then DE button to select AVL . SSM AVL 3 Press the G button and then DE button to select On or Off. Balance 0 Speaker 4 Press the EXIT button to return to normal TV viewing. 1 SSM AVL G Balance 0 On Off Speaker BALANCE ADJUSTMENT 23 You can adjust the sound balance of speaker to the levels you prefer. SSM TVMENU 1 2 3 Press the MENU button and then DE button to select the SOUND 52 Balance 0G LR Speaker Press the G button and then DE button to select Balance. Press the desired 4 menu. AVL G button and then FG button to make adjustment. Press the EXIT button to return to normal TV viewing. 23 SPEAKER You In can the internal adjust AV1, AV2, AV4(except speaker S-Video2(except 42PC3R * , LIST status. SLEEP 32/37/42LB2R * ), COMPONENT, RGB speaker and/or variable audio there is be I/II 32/37/42LB2R * ), AV3, and HDMI1/DVI with HDMI to DVI cable, TV can MENU EXIT outputted even though no OK video signal. Q.VIEW If you want to VOL your external hi-fi stereo system, turn off the internal speakers of the set. PR use MUTE SSM AVL 1 Press the MENU button and then DE button to select the SOUND 2 Press the G button and then DE button to select 3 Press the G button and then DE button to select On 4 or Balance Speaker. 1 Off. Press the EXIT button to return to normal TV 0 Speaker menu. viewing. SSM AVL Balance Speaker G On Off 23 TVMENU 53 TV MENU Sound Menu STEREO/DUAL RECEPTION LIST MENU EXIT a programme is selected, the sound information for the station appears after the programme number and station name I/II SLEEP When OK disappear. DUAL I Sends the DUAL II Sends the DUAL I+II Sends primary broadcast to the language loudspeakers. secondary loudspeakers. a broadcast separate language to each language If the stereo signal is weak in stereo reception, you can switch to by pressing the I/II button twice. In mono reception, the depth of sound is improved. To switch back to stereo, press the I/II button twice again. mono Language If selection for dual programme received two switch to DUAL I, DUAL II a button TVMENU 54 repeatedly. language VOL loudspeaker. A Mono sound selection A Q.VIEW to the broadcast languages (dual language), or DUAL I+II by pressing you can the I/II PR MUTE Broadcast On Mono MONO Stereo STEREO Dual DUAL I Screen Display NICAM RECEPTION If the set is (Near equipped with the receiver for NICAM reception, the high quality NICAM Companding Audio Multiplex) digital sound can be received. Instantaneous Sound output can be selected according to the type of received broadcast ing the I/II button repeatedly. When NICAM mono is received, you When NICAM stereo is received, you If the stereo signal is weak, switch or can to FM When NICAM dual is received, you NICAM DUAL I+II can can select NICAM MONO or select NICAM STEREO as follows by press- FM MONO. or FM MONO. mono. select N I C A M DUAL I, NICAM DUAL II or MONO. SPEAKER SOUND OUTPUT SELECTION AV1, AV2, S-Video2(except 32/37/42LB2R ), AV3, AV4(except 42PC3R 32/37/42LB2R ), Component, RGB, HDMI1/DVI or HDMI 2 mode, you can select output In * * , * sound for the left and Repeatedly L+R : Audio press the I / I I button to select the sound signal from audio L input output. is sent to the left loud speaker and audio right loud speaker. signal from audio L input is sent to left and right loud speakers. Audio signal from audio R input is sent to left and right loud speakers. input L+L : Audio R+R : right loudspeakers. signal from audio R is sent to the TVMENU 55 TV MENU Time Menu CLOCK SETUP You must set the time correctly before using on/off time LIST function. MENU If current time is unplugged, setting is erased by a power failure or I/II SLEEP EXIT the set OK reset the clock. After approx. 5 minutes. Q.VIEW VOL PR MUTE Press the MENU button and then D / E button to select the TIME menu. Clock Press the G button and then D/E button to select Clock. Off time On time Auto sleep Press the G button and then D / E button to set the hour. Press the G button and then D / E button to set the minutes. Press the E X I T button to return to normal TV 1 viewing. Clock G --:-- Off time On time Auto TVMENU 56 sleep 24 ~ ON/OFF TIME LIST The Off time preset automatically switches the set to standby I/II MENU EXIT at the SLEEP time. OK Two hours after the set is switched it will automatically switch pressed. back to by the on time function standby mode unless a on button has been Q.VIEW Once the at the on preset time/off time is set, these functions operate daily VOL PR time. MUTE Off time function overrides On timer function if both to the same they are set 123 time. The set must be in standby mode for the On timer to work. Clock Off time On time Press the MENU button and then D / E button to select the TIME Auto sleep menu. Press the G button and then D / E button to select Off time/On time. 1 Press the G button and then D/E button to select On. ? To cancel On/Off timer function, select Off. Clock Off time G Auto On Off On time 00 sleep 00 : Press the G button and then D/E button to set the hour. Press the G button and then D / E button to set the minutes. 23 For ? only On Programme timer : function Auto Volume: Press the G button and then D / E button to adjust sleep G On Off 00 Volume volume level at turn-on. Press the EXIT button to return to normal TV Off time On time ton to select the programme. ? TVMENU Clock Press the G button and then D/E but- Programme : 00 30 0 viewing. 4~6 57 TV MENU Time Menu AUTO SLEEP LIST MENU If set to on and there is automatically no input signal, I/II SLEEP EXIT the TV turns off OK after 10 minutes. Q.VIEW VOL PR MUTE 1 Press the MENU button and then D / E button to select Clock Off time the TIME menu. On time Auto 2 Press the G button and then D / E button to select Auto sleep. 3 Press the G button and then D / E button to select On Off. 4 Press the E X I T button to return to normal TV or sleep 1 viewing. Clock Off time On time Auto sleep G On Off 23 TVMENU 58 SLEEP TIMER You don't have to remember to switch the set off before you go to LIST sleep. The MENU EXIT sleep timer the preset time automatically has elapsed. switches the set to standby I/II SLEEP after OK Q.VIEW VOL Press the S L E E P button 1 The display ' z repeatedly to select the number of minutes. ' z - - Min will appear - PR on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. - When the number of minutes you want is the timer - - the - remaining sleep time, To cancel the display z the press the SLEEP button sleep time, repeatedly ' on once. press the SLEEP button until ' z - - - Min appears. When you switch the set off, the set releases the preset z screen, to count down from the number of minutes selected. begins To view the displayed z --- Min sleep time. TVMENU 59 TV MENU Special Menu CHILD LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This set is set to to remember which if you turn the set off. programmed even option it was LIST MENU I/II SLEEP EXIT last OK Q.VIEW VOL PR MUTE 1 Press the MENU button and then D / E button to select the SPECIAL 2 menu. Press the G button and then D / E button to select Language Child lock. Country Child lock ISM Method 3 Press the G button and then D / E button to select On 4 or Low Power Set ID Off. Demo Press the EXIT button to return to normal TV viewing. 1 Language Country Child lock G On Off ISM Method Low Power Set ID Demo TVMENU 23 ! NOTE ' -In Child lock On ', if the set is turned INPUT , TV , PR +/- or With the Child lock On the , front 60 panel is pressed off, press the r/I, NUMBER buttons while display viewing the ' on INPUT , PRD/E button Child lock on' appears set. on the set or POWER , the remote control. on the screen if any button on the PIP PR- ISM (Image Sticking Minimization) METHOD (Option) A frozen of still from PC/video game displayed on the prolonged periods ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. picture for screen a will result in PIP PR+ LIST a PIP INPUT SWAP MENU EXIT I/II SLEEP OK It's not available to use this function in LCD TV models. White wash White wash removes Note: An excessive clear entirely permanent images from the screen. permanent image may be impossible Q.VIEW to VOL PR with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is not best to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion This is the function to invert the The panel color is automatically panel color of the screen. inverted every 30 minutes. Language Country Child lock ISM Method Low Power 1 Demo select the SPECIAL 2 Set ID Press the MENU button and then D / E button to menu. Press the G button and then D / E button to select 1 ISM Method. Language Country 3 Press the G button and then D / E button to select either Normal, White wash, Orbiter or Inversion. Child lock ISM Method Low Power If you unnecessary to set this function, set Normal. Press the E X I T button to return to normal TV Normal White wash TVMENU Orbiter Set ID Demo 4 G Inversion viewing. 23 61 TV MENU Special Menu LOW POWER (Option) LIST MENU I/II EXIT This is the function to reduce the power It's not available to use consumption SLEEP of the set. OK this function in LCD TV models Q.VIEW VOL PR Language Country 1 Child lock Press the MENU button and then D/E button to select the SPECIAL ISM Method Low Power menu. Set ID 2 Demo Press the G button and then D/E button to select Low power. 3 Press the G button and then D/E button to select On or 1 Off. Language 4 Press the EXIT button to return to normal TV viewing. Country Child lock ISM Method Low Power G On Off Set ID Demo XD DEMO Use it to see 23 the difference between XD Demo on and XD Demo off. Language It's not available to use this function in Country RGB[PC], HDMI[PC] Child lock mode. ISM Method Low Power TVMENU 1 Press the MENU button and then select the SPECIAL 2 use Set ID D/E button to Demo To start G menu. Press the G button and then use D / E button to select XD Demo. 23 ? 3 Press the G button to 4 To * stop 62 XD TM Off XD Demo. XD TM On XD Demo, press the MENU button. In 'Child lock button begin XD Demo on Off', the set. to stop 'XD Demo', press any Menu Exit TV MENU Screen Menu AUTO CONFIGURE (RGB [PC] Automatically adjusts picture position shaking. and minimizes config. ONLY) image LIST MENU I/II SLEEP EXIT Although the image is still not correct, your properly but needs further adjustment. The Auto MODE set is functioning OK functions don't need to be run for HDMI mode. Auto configure Q.VIEW This function is for the automatic of the VOL adjustment position, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress. screen PR MUTE Auto config. config. Manual XGA Mode ARC PIP 1 Press the MENU button and then select the SCREEN 2 D / E button to Transparency Reset menu. Press the G button and then select Auto use use D / E button to 1 config.. Auto config. config. G To Set Manual XGA Mode 3 Press the G button to start Auto config.. ARC PIP ? When Auto config. has finished, OK will be shown on Transparency Reset screen. ? If the Auto If position of the image is still not correct, try adjustment again. picture needs to be adjusted adjustment in RGB (PC), Manual config. you more can after Auto adjust . 4 Press the EXIT button to return to normal TV 23 TVMENU the viewing. 63 TV MENU Screen Menu MANUAL CONFIGURE LIST If the picture isn't clear after auto adjustment and trembling, adjust the especially if characters are picture phase manually. still To correct the adjust screen size, This function works in the It's not available to COMPONENT use following o c k mode : RGB[PC]. Phase, Clock function in RGB[DTV], (480p/576p/720p/1080i/1080p(47LB2R a s e Q.VIEW VOL PR * MUTE mode. 123 This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal P h SLEEP k. * o c I/II OK C l only)), HDMI1/DVI, HDMI2 (480p/576p/720p/1080i/1080p(47LB2R only)) C l MENU EXIT screen size will also change. This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Auto config. config. Manual XGA Mode ARC PIP Transparency Reset 1 1 Press the M E N U button and then use D / E button to Auto select the SCREEN 2 config. Manual Press the G button and then D / E button to select Manual 3 menu. config.. config. G Phase 0 XGA Mode Clock 0 ARC H-Position 0 PIP V-Position 0 Transparency Reset Press the G button and then D / E button to select Phase, Clock, H-Position or V-Position. 234 TVMENU 64 4 Press the F / G button to make appropriate adjustments. 5 Press the EXIT button to return to normal TV viewing. SETTING THE PICTURE FORMAT ARC VCR PIP SIZE POSTION PIP PR+ SWAP PIP INPUT TEXT PIP PR- You watch the can Full (option) Original , Zoom2 If a screen in various , 4:3 picture formats; Spectacle 16:9 , (Wide), , 14:9 and Zoom1 or . fixed image is displayed on the screen for a long time, that fixed imprinted on the screen and remain visible. image may become There might be uncomfortable in full mode. Then change LIST MENU SLEEP into other mode. You OK can adjust the DE button. enlarge proportion using This function works in the 1 following signal. Press the M E N U button and then select the SCREEN DE button to use menu. 2 Press the G button and then 3 Press the G button and then use DE button to select ARC. use DE button to select Auto Spectacle, Full(option), Original, 4:3, 16:9(Wide), 14:9, Zoom1 ? I/II EXIT or config. Manual config. XGA Mode Zoom2. ARC PIP Spectacle Transparency Reset When your TV receives the wide screen signal, when selected it will adjust the picture horizontally, in non-linear proportion, to fill the entire screen. ? F u l l(option) When your TV receives the wide screen signal, when selected it will adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. 1 Auto config. Manual config. XGA Mode ? Original ARC When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. PIP Transparency Reset Spectacle G Full Original 4:3 16:9 14:9 ? 4:3 Zoom1 Following selection will lead you to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. ? ? 16:9 (Wide) Following selection will lead you to adjust the picture hor izontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). Zoom2 23 TVMENU 14:9 You can enjoy programme just the through like that the format of 14:9 the 14:9 mode. The picture screen 4:3 is magnified or general TV 14:9 is viewed to the left / right. screen 65 TV MENU Screen Menu SETTING THE PICTURE FORMAT ? Zoom1 Following selection will lead you to view the alternation, while filling the entire bottom ? portions of the picture screen. will be picture without any cropped. G Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The pic ture taking a halfway trade off between alteration and screen coverage. 4 can only select 4:3, 16:9 (Wide) in RGB[PC], HDMI[PC] mode only. You can only select 4:3 16:9 (Wide) and Zoom1 Zoom2 in RGB[DTV], HDMI1/DVI[DTV], You , , mode viewing. function(Option) Press the A R C button and then screen. Spectacle 66 G NOTE HDMI2[DTV], Component Press the E X I T button to return to normal TV A Scroll TVMENU ! However, the top and D E use DE button to move only. SELECTING WIDE VGA/XGA/UXGA MODE LIST MENU I/II EXIT To see a normal picture, SLEEP match the resolution of RGB mode and selection of VGA/XGA/UXGA mode. This function works in the following OK mode: RGB[PC] mode Q.VIEW VOL 1 Press the M E N U button and then select the SCREEN use PR Auto DE button to config. config. Manual XGA Mode menu. ARC PIP 2 Press the G button and then XGA Mode 3 (or VGA Mode Press the G button and then DE button to select use UXGA or use Transparency Reset Mode). DE button to select the desired VGA/XGA/UXGA resolution. 1 Auto 4 Press the EXIT button to return to normal TV config. config. Manual viewing. XGA Mode G 1280x768 PIP 1360x768 Transparency 1366x768 Reset INITIALIZING (Reset to 1024x768 ARC 23 original factory settings) This function operates in current mode. To initialize the adjusted value Auto config. Manual 1 Press the MENU button and then DE button to select the SCREEN menu. TVMENU ARC PIP Transparency Reset 2 config. XGA Mode G To set Press the G button and then DE button to select Reset. 3 Press the G button. ? You can initialize Auto size, PIP position, PIP (PIP size and PIP mode 23 config, Manual config, Position, Transparency. position are PIP available to work in PIP only) 67 APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-control- lable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the remote control, while pointing at the component. Test the POWER and PR+- buttons to see if the component responds properly. If not, the remote requires programming to operate the device. Turn V C the component to be programmed, then press the corresponding mode button on the remote control. The remote control button of desired device is lighted. on R) Press the M E N U and M U T E buttons simultaneously, the remote control is ready to be (such as a D V D programmed or for the code. Enter the a code number using the NUMBER buttons corresponding component can be found on on the the remote control. following pages. Programming code numbers for Again, if the code is correct, the device will turn off. Press the MENU button to store the code. Test the remote control functions to APENDIX 68 see if the component responds properly. If not, repeat from step 2. PROGRAMMING CODE VCRs Brand Codes AIWA 034 AKAI 016 043 125 146 046 Brand Codes MAGNAVOX 031 033 067 068 012 031 124 MARANTZ 034 033 041 Brand Codes SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 067 125 069 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 0 23 039 0 43 MARTA 101 MATSUI 027 030 BROKSONIC 035 037 129 MEI 031 033 CANON 028 031 033 MEMOREX 003 010 014 031 CAPEHART 108 033 034 053 072 CRAIG 003 040 135 139 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 065 108 112 116 101 102 134 MGA 045 046 059 064 MINOLTA 013 020 110 111 MITSUBISHI 013 020 045 046 117 119 049 051 059 061 022 043 048 135 SANYO 003 007 010 014 102 134 SCOTT 017 037 112 129 003 008 009 010 013 014 017 020 031 042 073 081 054 149 131 SEARS 101 SHARP 031 SHINTOM 024 SONY 003 009 031 052 056 057 058 076 077 078 149 033 034 DAYTRON 108 DBX 012 023 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 017 025 027 048 SOUNDESIGN 034 029 031 034 035 NORDMENDE 043 STS 013 036 037 046 101 OPTONICA 053 054 SYLVANIA 031 129 131 138 153 PANASONIC 066 070 074 FISHER 003 008 009 010 133 140 145 FUNAI 034 GE 031 033 063 072 107 109 144 147 132 136 GO VIDEO 039 043 012 045 004 018 026 034 137 150 HARMAN KARDON HITACHI 151 SANSUI MTC 034 040 MULTITECH 024 034 NEC 012 023 PENTAX 013 020 039 031 043 033 063 PHILCO 031 034 067 PHILIPS 031 033 034 067 071 101 021 048 054 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 033 070 TEKNIKA 019 031 033 034 101 THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 082 112 131 TOTEVISION 040 101 145 UNITECH 040 034 VECTOR RESEARCH 012 043 063 PILOT 101 INSTANTREPLAY 031 033 PIONEER 013 JCL 031 033 PORTLAND 108 JCPENNY 012 013 015 PULSAR 072 040 066 101 QUARTZ 011 014 QUASAR 033 066 075 RCA 013 020 033 040 041 062 063 VICTOR 048 107 109 140 144 VIDEO CONCEPTS 012 145 147 VIDEOSONIC 040 WARDS 033 JENSEN 043 JVC 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 003 008 010 014 001 012 013 020 031 033 034 040 101 106 114 123 053 054 101 KENWOOD LG (GOLDSTAR) REALISTIC 034 0 46 003 013 017 024 031 033 034 040 053 054 131 LLOYD 034 RICO 058 YAMAHA 012 034 039 LXI 003 009 013 014 RUNCO 148 ZENITH 034 048 056 017 034 101 106 SALORA 014 058 072 080 MAGIN 059 067 083 043 101 APENDIX 040 69 APPENDIX PROGRAMMING CODE DVD Brand Codes Brand Codes APEX DIGITAL 022 MITSUBISHI DENON 020 014 NAD GE 005 006 ONKYO 008 027 PANASONIC 003 PHILIPS 013 PIONEER 004 HARMAN KARDON APENDIX 70 Brand Codes 002 RCA 005 006 023 SAMSUNG 011 015 017 SONY 007 009 THOMPSON 005 006 TOSHIBA 019 008 YAMAHA 009 018 ZENITH 010 016 JVC 012 LG 001 MAGNAVOX 013 PROCEED 021 MARANTZ 024 PROSCAN 005 010 016 025 026 006 025 TROUBLESHOOTING CHECKLIST The does operation not work normally. Check to causing The control remote doesn't Power is work see if there is any Are batteries installed with correct Correct remote suddenly turned off Install new Is the sleep operating on picture & ly No or poor slowon color picture poor Power product is turned problem bars or Poor on. outlet, plug another product's power cord into the outlet product's This is normal, the power cord image was is muted contact your service center, if the during picture Adjust Color in Keep sufficient distance between the Try a menu vertical in. plugged the product startup process. Please appeared after five minutes. has not option. another channel. The problem Are the video cables installed product and the VCR. may be with the broadcast. properly? Check for local interference such brightness as an of the electrical picture. appliance or power tool. picture shaking reception some channels or streaks in pictures cable Station or Station signal product experiencing problems, on Check for Lines interrupted may be with the broadcast. Activate any function to restore the Horizontal -)? Check your antenna direction and/or location. switching or to mode set: TV, VCR etc.? settings. another channel. The where the after - work. not Test the wall power Picture appears to +, Is the power cord inserted into wall power outlet? sound No polarity (+ station tuned with Auto off activated. Check whether the No and the remote control timer set? Check the power control Try product batteries. No broadcast The video function does between the object obstruction. is weak, reorient sources Check antenna of possible (Change tune to another station. antenna to receive weaker station. interference. the direction of the antenna). APENDIX 71 APPENDIX The audio function does not work. Press the VOL+- button. Picture OK No Sound muted? Press MUTE button. & Try sound another channel. The problem Are the audio cables installed No from output of the one speakers Adjust A Unusual sound inside the There is from product problem a Balance in change when the menu in ambient product is signal in range. stripe ground & Noise on & option. humidity is turned PC mode. PC mode (Only Check the an a unusual noise fault with the horizontal frequency, or vertical frequency. input source. or Horizontal Work the Auto configure or Incorrect or colour 72 may result in off and does not indicate applied) position APENDIX temperature back- Screen colour unstable or on or of out Vertical bar properly? product. Adjust resolution, The may be with the broadcast. is single Check the signal cable. Reinstall the PC video card. adjust clock, phase, or H/V position. MAINTENANCE Early malfunctions have your Cleaning the 1 Here's a 2 it to Make a the Cleaning the To remove Please be dirt sure prevented. Careful and regular cleaning can extend the amount of time you will unplug the power cord before you begin any cleaning. to turn the power off and way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm or dish washing detergent. Wring the cloth until it's almost dry, and then little fabric softener wipe sure be sure Screen great water and use can TV. Be new the screen. excess water is off the screen, and then let it air-dry before you turn on your TV. Cabinet or dust, wipe the cabinet with not to use a a soft, dry, lint-free cloth. wet cloth. Extended Absence CAUTION If you expect to leave your TV dormant for the power cord to protect against possible long time (such as a vacation), it's a good damage from lightning or power surges. a idea to unplug APENDIX 73 APPENDIX PRODUCT SPECIFICATIONS MODELS 37LC2R * 37LC25R * 42LC2R * 37LC2R-ZH 37LC25R-ZH 42LC2R-ZH (Width x Height 42LC2RA-ZH 37LC2RB-ZH 42LC2RB-ZH 37.1 28.7 x 11.2 inches x Weight 944.0 including stand excluding stand 659.3 x x 26 129.7 x mm 5.1 inches x 30.4 kg/67.0 25.9kg /57.1 41.4 x 1054 x 41.4 lbs mm 32x 11.2 inches 746 29.3 x 136.8mm x x 5.3 inches 42.3kg/93.2 35.7kg/78.7 lbs requirement lbs lbs AC100-240V~50/60Hz System External Antenna 813 x286 x Depth) x 37.1 Power 1054 944.0x729x286mm without stand Television 42LC25R-ZH 37LC2RA-ZH with stand Dimensions 42LC25R * PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L' Impedance Environment condition 75Ω Operating Temperature 0~40°C/32~104°F Operating Humidity Less than 80% Storage Temperature -20~60°C/-4~140°F Storage Humidity Less than 85% 37LC3R* 42LC3R * 37LC3R-ZH 42LC3R-ZH MODELS 1059.9 with stand (Width x Height x 659 41.7 x 26 Dimensions x 1059.9 Weight including excluding stand 28 stand 24.76 1195.5 mm 47 x x 759.8 30 requirement System External Antenna Impedance Environment condition 5.1 inches x x 391.3mm 15.4 inches 684 x x 139mm 47x27x5.4inches 38.4 33.9 kg/54.5lbs kg/76.7 lbs kg/74.7 lbs AC100-240V~50/60Hz PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L' 75Ω 0~40°C/32~104°F Operating Temperature Less than 80% Operating Humidity -20~60°C/-4~140°F Storage Temperature Less than 85% Storage Humidity specifications x 1195.5 mm kg/61.7lbs Power Television 74 299 592.2x 132 x 41.7 x 23.3 The x 12 inches Depth) without stand APENDIX x shown above may be changed without prior notice for quality improvement. 42PC1R* MODELS (Width x Height 42PC1R-ZH 42PC3R-ZH 50PC1R-ZH 42PC3RA-ZH 50PC1RA-ZH 44.4 x 50PC1R* 42PC1RA-ZH 1129.0 x 748.5 with stand Dimensions 42PC3R* x 29.4 x 380.0 mm 14.9 inches x 1129.0 x 748.5 44.4x 29.4 x 333.6 mm 1302.6 51.2 13.1inches x x x 872 34.3 x x 355.8 mm 14 inches Depth) 1129.0 x 695.0 without stand 44.4 Weight including x 27.3 x x mm 4 inches 1129.0 x 695.0 x 103.7 44.4x 27.3 stand 29.3 kg/64.6lbs 31.0 stand 25.4 lbs 24.3 excluding kg/56.0 Power requirement System External Antenna Impedance x mm 4 inches 1302.6 51.2 x 810x 107.7 x 31.8 kg/68.4 lbs 51.5 kg/53.4lbs 44.3 x mm 4.2 inches kg/113.5 lbs kg/97.7 lbs AC100-240V~50/60Hz Television PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L' 75Ω 0~40°C/32~104°F Operating Temperature Environment condition 103.7 Less than 80% Operating Humidity -20~60°C/-4~140°F Storage Temperature Less than 85% Storage Humidity 47LB2R* MODELS 47LB2R-ZH 47LB2RF-ZH 1280x828x315mm with stand 50.3 Dimensions (Width x Height x 12.4 inches x 1280x 719 50.3 Weight 28.3 x 137 x 5.3inches mm stand 58kg/127.8lbs excluding stand 47.5kg/104.7 lbs Power requirement System External Antenna Impedance Environment condition x including AC100-240V~50/60Hz Television PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L' 75Ω 0~40°C/32~104°F Operating Temperature Less than 80% Operating Humidity -20~60°C/-4~140°F Storage Temperature Less than 85% Storage Humidity specifications 32.6 Depth) without stand The x shown above may be changed without prior notice for APENDIX quality improvement. 75 APPENDIX PRODUCT SPECIFICATIONS 32LB2R* 37LB2R* 42LB2R* 32LB2R-ZH 37LB2R-ZH 42LB2R-ZH MODELS 911.4x599x259mm with stand 35.8 Dimensions (Width Height x x 10 inches 911.4 35.8 Weight x x 511.5x 124.2mm 20.1 x 4.8 inches 1175 46.2 x 768x300 30.2 x x mm 11.8 inches x 23.4 x 5.2 inches 1175 46.2 x x 670x 143.8mm 26.3 x 5.6 inches kg/49.8 lbs 31.6kg/69.6 lbs 41.4kg/91.2 lbs excluding stand 17.8 kg/39.2 lbs 25.3 lbs 33.9kg/74.7 lbs kg/55.7 PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L' 75 ohm Impedance 0 Operating Temperature shown above may be changed without 40°C/32 ~ ~ 104°F Less than 80% -20 Storage Humidity 76 mm 10.2 inches 22.6 Storage Temperature APENDIX x 1045.8x 594.4x 133mm 41.1 Operating Humidity specifications 27.2 AC100-240V~50/60Hz Environment condition The x stand System External Antenna 41.1 including requirement Television 1045.8x 693.8x 260.4 Depth) x without stand Power 23.5 x ~ 60°C/-4 ~ 140°F Less than 85% prior notice for quality improvement.