LG | 42PN450B | LG 42PN450B Owner’s Manual

Printing specification
Drawn
Checked
Approved
Signature
Danbi.park
Yena.park
Jongok.kim
MMM/DD/YYYY
Jan/11/2013
Jan/11/2013
Jan/11/2013
1. Model Description
Model name
:
42PN450D-ZA
Brand name
:
LG
Part number
2nd, 3rd Suffix
:
EK
Product name
:
42PN450D
(Revision number)
:
MFL67710003
(1301-REV00)
2. Printing Specification
1. Trim size (Format)
:
182 mm x 257 mm (B5)
• Cover
:
1 Color (Black)
• Inside
:
1 Color (Black)
• Cover
:
Uncoted, wood-free paper 60 g/㎡
• Inside
:
Uncoted, wood-free paper 60 g/㎡
4. Printing method
:
Off set
5. Bindery
:
Saddle stitching
6. Language
:
Eng-UK (1)
7. Number of pages
:
32
2. Printing colors
3. Stock (Paper)
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
O
T
E
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK :
Printed in Kazakhstan
LGEKR :
Printed in Korea
LGERS :
Printed in Mexico
LGEAZ
:
Printed in Brazil
LGEMA :
Printed in Poland
LGESY :
Printed in China
LGEEG :
Printed in Egypt
LGEMX :
Printed in Mexico
LGETH :
Printed in Thailand
LGEIL
:
Printed in India
LGEND :
Printed in China
LGEVN :
Printed in Vietnam
LGEIN
:
Printed in Indonesia
LGERA :
Printed in Russia
LGEWR :
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number
MMM/DD/YYYY Signature
ECO Number
Change Contents
Part number
Pagination sheet
Total pages
Front
MFL67710003
:
32 pages
(1301-REV00)
Back
(Eng)
P/No.
:
(Revision number)
2
…
…
…
…
31
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
PN45**
PN65**
P/NO : MFL67710003 (1301-REV00)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3
Licenses
3
OPEN SOURCE SOFTWARE NOTICE
3
EXTERNAL CONTROL DEVICE
SETUP
4
Safety Instructions
10
Installation Procedure
10
ASSEMBLING AND PREPARING
10
13
14
15
16
16
18
19
20
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
21
MAKING CONNECTIONS
21
21
22
22
23
23
24
24
24
24
25
Antenna Connection
Satellite dish Connection
HDMI Connection
DVI to HDMI connection
Component Connection
Composite Connection
Audio Connection
- Digital optical audio connection
USB Connection
CI module Connection
Euro Scart Connection
26
REMOTE CONTROL
27
Network setting
27
Wired Network Connection
28
Using the User guide
29
MAINTENANCE
29
29
29
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
29
TROUBLESHOOTING
30
SPECIFICATIONS
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
ENGLISH
Licenses
4
SAFETY INSTRUCTIONS
ENGLISH
Safety Instructions
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.
yy
This plug must remain readily attached and operable when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains socket with Grounded
yy
earth pin. (Except for devices which are not grounded on earth.) Otherwise
possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if not secured
yy
completely into socket, fire ignition may break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
When mounting TV onto wall make sure to neatly install and isolate cabling from
yy
rear of TV as to not create possibility of electric shock /fire hazard.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
yy
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
yy
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)
Do not put or store inflammable substances near the product.
yy
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow any impact, shock or any objects to fall into the unit, and do not drop
yy
anything onto the screen. You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the TV for
yy
a long period of time. Accumulated dust can cause fire hazard and insulation
deterioration can cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult with a qualified service technician. If not
yy
installed by a qualified technician, this may create a fire hazard or an electric shock
hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Batteries should not be exposed to excessive heat.eg keep away from direct Sunlight , open fireplace
yy
and electric heaters .
Do not place non-rechargeable batteries in charging device.
yy
Make sure there are no objects between the remote control and its sensor.
yy
Signal from Remote Control can be interrupted due to external/internal lighting eg
yy
Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it, as it may cause damage to screen.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary or permanent distortion/damage to
screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
yy
Don’t pull at the cord to unplug the power cord from the power board, as this could
be hazardous.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service centre once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and colour of the panel depending on your
yy
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
Installation Procedure
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
ASSEMBLING AND PREPARING
11
ENGLISH
Remote Control,
Batteries (AAA)
(See p. 26)
Owner’s manual
x1
Power Cord Holder
(See p. 20)
Desk-mount Screw
(Only 42PN45**)
(See p. 18)
Stand Body / Stand
Base
(See p. 16)
Protection Cover
(Only 50PN45**,
50PN65**)
(See p. 17)
Power Cord
x7
M4 x 14
Screw for assembly
(Only 42PN45**)
(See p. 16)
Ferrite core
(Depending on model)
(See p. 12)
x7
M5 x 16
Screw for assembly
(Only 50PN45**,
50/60PN65**)
(See p. 16)
12 ASSEMBLING AND PREPARING
ENGLISH
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to upgrade
yy
of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to the TV]
[to a wall plug]
[Figure 1]
2 Use the ferrite core to reduce the electromagnetic interference in the cable.
Place the ferrite core close to the TV.
(Black)
[Cross Section of
Ferrite Core]
Wind the component Y, Pb, Pr, L, R cable on the ferrite core once.
[to the TV]
[to an External device]
10 mm(+ / - 5 mm)
[Figure 2-1]
Gather and bind the component Y, Pb, Pr, L, R and scart cable with the
ferrite core.
[to an External device]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
10 mm(+ / - 5 mm)
[Figure 2-2]
Wind the PC audio cable on the ferrite core once.
[to an External device]
[to the TV]
10 mm(+ / - 5 mm)
[Figure 2-3]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core B and thrice on the ferrite core A. Place the ferrite core close to the TV and an External device.
A (Gray) B (Gray)
[to the TV]
B
A
[to an External
device]
[Figure 3]
[Cross Section of
Ferrite Core]
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there is LAN port, additionally follow as shown in Figure 3.
For an optimal connection, HDMI cables and USB
yy
devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that
supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
*A
*B
10 mm
18 mm
ASSEMBLING AND PREPARING
13
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
LG Audio Device
Compatibility
PN45**
PN65**
LG Audio Device
•
•
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ENGLISH
Separate purchase
14 ASSEMBLING AND PREPARING
ENGLISH
Parts and buttons
Screen
Buttons
Power indicator
Button
Description
Turns the power on or off.
Selects the highlighted menu option or confirms an input
S
Accesses the main menus, or saves your input and exits the menus.
Changes the input source
H
H
Adjusts the volume level.
Scrolls through the saved programmes.
AV IN 1
Remote control Sensor
COMPONENT
IN
Speakers
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ENGLISH
Lifting and moving the TV
15
16 ASSEMBLING AND PREPARING
ENGLISH
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
1
Only 50PN45**, 50/60PN65**
3
3 EA
M5 x 16
Only 42PN45**
3 EA
M4 x 14
Stand Body
Front
Only 50PN45**,
50/60PN65**
4 EA
M5 x 16
Only 42PN45**
Stand Base
4 EA
M4 x 14
2
ASSEMBLING AND PREPARING
17
ENGLISH
To detach the stand
(Only 50PN45**, 50PN65**)
1
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed. Do not use
too much force and over tighten the screws;
otherwise screw may be damaged and not
tighten correctly.
NOTE
yy When installing the wall mounting bracket,
use the Protection Cover.
yy This will protect the opening from
accumulating dust and dirt.
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
4 EA
M5 x 16
2
Protection
cover
2
1 EA
M5 x 16
1
18 ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
20˚
10 cm
10 cm
m
10 c
10 cm
CAUTION
yy When adjusting the angle of the product,
watch out for your fingers.
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
-- Personal injury may occur if hands or fingers are pinched. If the product is tilted too
much, it may fall, causing damage or injury.
Securing the TV to a wall
(This feature is not available for all models.)
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
(Only 42PN45**)
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
ASSEMBLING AND PREPARING
A
yy Make sure that children do not climb on or
hang on the TV.
B
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount
bracket
42/50PN45**
50/60PN65**
400 x 400
M6
4
PSW420BX
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ENGLISH
CAUTION
19
20 ASSEMBLING AND PREPARING
ENGLISH
Tidying cables
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
(Only 42PN45**)
Power cord holder
(Only 50PN45**, 50/60PN65**)
Power cord holder
2 Gather and bind the cables with the Cable
Holder.
Cable holder
CAUTION
yy Do not move the TV by holding the cable
holder and power cable holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly
uses diagrams for the PN45** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
Antenna Connection
ENGLISH
MAKING
CONNECTIONS
21
Wall Antenna
Socket
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus
Satellite dish Connection
(Only satellite models)
13/18 V
700 mA Max
Satellite Dish
LNB IN
Satellite
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
22 MAKING CONNECTIONS
IN 1(PC)
IN 1(PC)
ENGLISH
DVI to HDMI connection
HDMI Connection
AUDIO IN (PC)
IN 2
L/MONO
DVD / Blu-Ray / PC
HD Cable Box / HD STB
RED
WHITE
(*Not Provided)
(*Not Provided)
HDMI
(*Not
Provided)
(Only HDMI IN 1(PC))
AUDIO OUT
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
DVI OUT
DVD / Blu-Ray /
HD Cable Box / PC
Choose any HDMI input port to connect. It does
not matter which port you use.
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
NOTE
yy Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in
use.
MAKING CONNECTIONS
Composite Connection
AUDIO IN (PC)
AV IN 2
ENGLISH
Component Connection
23
AUDIO IN (PC)
L/MONO
L/MONO
COMPONENT
IN
COMPONENT
IN
AV IN 2
RED
WHITE
(*Not Provided)
RED
WHITE
RED
BLUE
GREEN
L (MONO)
AUDIO
RED
VIDEO
WHITE
AUDIO
YELLOW
VIDEO
YELLOW
RED
WHITE
RED
BLUE
GREEN
(*Not
Provided)
R
DVD / Blu-Ray / HD Cable Box
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
VCR / DVD / Blu-Ray / HD Cable Box
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
24 MAKING CONNECTIONS
USB Connection
USB IN
ENGLISH
Audio Connection
(*Not Provided)
USB
(*Not Provided)
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
CI module Connection
OPTICAL AUDIO IN
Digital Audio System
(*Not Provided)
You may use an external audio system instead of
the built-in speaker.
Digital optical audio connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
NOTE
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
View the encrypted (pay) services in digital TV
mode. This feature is not available in all countries.
NOTE
yy Check if the CI module is inserted into the
PCMCIA card slot in the right direction. If the
module is not inserted properly, this can cause
damage to the TV and the PCMCIA card slot.
MAKING CONNECTIONS
AV 1
IN / OUT
(*Not Provided)
AUDIO / VIDEO
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown.
Output
Type
Current
input mode
Digital TV
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
ENGLISH
Euro Scart Connection
25
26 REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
TV/
RAD
POWER Turns the TV on or off.
RATIO
INPUT
SUBTITLE Recalls your preferred subtitle in digital mode.
AV MODE Selects an AV mode.
RATIO Resizes an image.
1
2
3
.,;@
def
INPUT Changes
theabc
input source.
4
5
6
TV/RAD Selects Radio, TV and DTV programme.
ghi
jkl
mno
LIST Accesses the saved programme list.
7
8
9
LIST
0
Q.VIEW
Q.VIEW Returns
to the
viewed programme.
pqrs
tuv previously
wxyz
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE
FAV
GUIDE
MUTE
[
ENGLISH
REMOTE CONTROL
P
PAGE
Mutes allFAV
sounds.
TEXT , T.OPT These buttons are
used for teletext.
P
A
G
P or next
E
screen.
PAGE Moves to the previous
INFO
MUTEinformation of the current programme and screen.
Views the
SETTINGS Accesses the main menus.
SETTINGS
Q. MENU
Accesses the quick menus.
OK
MY APPS
Selects menus or options and confirms your input.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
Back Returns to the previous level.
EXIT Clears all on-screen displays and return to TV viewing.
Accesses the AV devices connected with the HDMI cable through HDMICEC. Opens the SIMPLINK menu.
EXIT
AD Switches the Audio Description On or Off.
ꕘ(FREEZE) Freezes the current frame while using the TV, AV, Component, or
HDMI input source.
Control buttons (
) Controls the MY MEDIA menus, or the
SIMPLINK compatible devices (USB,SIMPLINK).
Colour buttons These buttons are used for teletext (on TELETEXT models
: Green,
: Yellow,
: Blue)
only), Programme edit. (REC : Red,
SUBTITLE
LIVE TV
INFO
NETWORK SETTING
27
ENGLISH
Network setting
(Depending on model)
Image shown may differ from your TV.
Wired Network Connection
LAN
Internet
connection
Wired router
1 Press the SETTING button to access the main menu.
2 Select the NETWORK → Network Setting menu.
NETWORK
Move
4 The device automatically tries to connect to the network.
Network Setting
Network connecting...
OK
Network Setting
Network Status
Cancel
Previous
5 The connected network is displayed.
Select the Complete to confirm the network connection.
3 Select the Start Connection.
Network Setting
Network Setting
Wired network is connected.
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
For detailed settings, select [Set Expert].
Set Expert
Start Connection
Previous
Previous
Complete
28 USING THE USER GUIDE
ENGLISH
Using the User guide
User Guide allows you to more easily access the detailed TV information.
1 Press SETTINGS to access the main menus.
2 Press the RED button to access the Customer
Support menus.
3 Press the Navigation buttons to scroll to User
Guide and press OK.
1
User Guide
OPTION > To set language
SETTING
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
Language
You can select the language of the menu displayed on the screen and the digital
sound broadcasting.
 Menu Language : Selects a language for the display text.
 Audio Language [In Digital mode Only] : Selects the desired language when
watching digital broadcasting containg several voice languages.
 Subtitle Language [In Digital mode Only] : Use the Subtitle function when two
or more subtitle languages are broadcast.
If subtitle data in a selected language is not broadcast, the default
language subtitle will be displayed.
OPTION
Advabced Function
Information
PICTURE
AUDIO
SETUP
TIME
LOCK
OPTION
NETWORK
MY MEDIA
Press OK() to set picture settings.
Customer Support
SETTING
2
OPTION
Zoom In
Close
Language
You can select the language of the menu displayed on the screen and the digital
sound broadcasting.
 Menu Language : Selects a language for the display text.
 Audio Language [In Digital mode Only] : Selects the desired language when
watching digital broadcasting containg several voice languages.
 Subtitle Language [In Digital mode Only] : Use the Subtitle function when two
or more subtitle languages are broadcast.
If subtitle data in a selected language is not broadcast, the default
language subtitle will be displayed.
Exit
Software Update
Picture Test
2
Sound Test
Signal Test
Zoom Out
Close
Product/Service Info.
Network Test
User Guide
Close
User Guide
3
2
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
OPTION
To set language
To set country
Advabced Function
Disabled Assistance
Information
1
To set other options
1
Allows to select the category you want.
2
Allows to select the item you want.
You can use
to move between pages.
H
3
Allows to browse the description of the
function you want from the index.
1
Shows the description of the selected menu.
You can use
to move between pages.
H
2
Zooms in or out the screen.
MAINTENANCE / TROUBLESHOOTING
29
ENGLISH
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ,
to
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
When connecting to
the PC (HDMI DVI),
‘No signal’ or ‘Invalid
Format’ is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
).
30 SPECIFICATIONS
ENGLISH
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
Weight
With stand (kg)
Without stand (kg)
50PN45**
50PN450D-ZA
50PN451D-ZA
50PN452D-ZA
50PN450B-ZA
50PN4503-ZA
50PN450D-ZE
50PN451D-ZE
50PN452D-ZE
50PN450B-ZE
50PN450D-ZF
50PN451D-ZF
50PN452D-ZF
50PN450B-ZF
1168.0 x 755.4 x 292.7
983.6 x 595.6 x 57.0
19.6
1168.0 x 698.6 x 57.0
25.4
18.4
24.0
50PN65**
60PN65**
50PN6500-ZA
50PN650S-ZA
50PN650T-ZA
50PN651T-ZA
50PN6500-ZB
50PN650S-ZB
50PN650T-ZB
50PN6504-ZB
50PN6506-ZB
50PN651T-ZB
50PN6500-ZC
50PN650S-ZC
50PN650T-ZC
50PN651T-ZC
1168.0 x 755.4 x 292.7
60PN6500-ZA
60PN650S-ZA
60PN650T-ZA
60PN651T-ZA
60PN6500-ZB
60PN650S-ZB
60PN650T-ZB
60PN6504-ZB
60PN6506-ZB
60PN651T-ZB
60PN6500-ZC
60PN650S-ZC
60PN650T-ZC
60PN651T-ZC
1386.8 x 874.0 x 340.0
1168.0 x 698.6 x 57.0
1386.8 x 821.7 x 57.0
With stand (kg)
26.1
37.7
Without stand (kg)
24.7
34.5
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
Weight
42PN45**
42PN450D-ZA
42PN451D-ZA
42PN452D-ZA
42PN450B-ZA
42PN4503-ZA
42PN450D-ZE
42PN451D-ZE
42PN452D-ZE
42PN450B-ZE
42PN450D-ZF
42PN451D-ZF
42PN452D-ZF
42PN450B-ZF
983.6 x 650.3 x 250.0
CI Module Size
(W x H x D)
Environment
condition
100.0 mm x 55.0 mm x 5.0 mm
Operating
Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
SPECIFICATIONS
Programme coverage
Maximum number of
storable programmes
Digital TV
Analogue TV
DVB-T
DVB-C
DVB-S/S2
DVB-T/T2
DVB-C
DVB-T
DVB-C
PAL/SECAM B/G/I/D/K,
SECAM L/L’ 3
VHF, UHF
C-Band, Ku-Band
VHF, UHF
6,000
1,800
VHF: E2 to E12, UHF :
E21 to E69, CATV: S1 to
S20, HYPER: S21 to S47
External antenna impedance 75 Ω
1 Only satellite models
2 Only DVB-T2 support models
3 Except for DVB-T2 support models
HDMI/DVI-DTV supported mode
Component port connecting information
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
HDMI/DVI-PC supported mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1360x768
47.712
60.01
1280x1024
63.981
60.02
1920x1080
67.5
60.02
(Only 50PN65**, 60PN65**)
Component ports on
the
TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
Y
Y
Y
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
ENGLISH
Television system
Satellite Digital TV1 Digital TV2
31
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
Country
Service
Service
0 810 144 131
0900 543 5454
015 200 255
800 187 40
0032 15 200
255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
902 500 234
3220
0770 54 54 54
54
01803 11 54 11
0848 543 543
801 11 200 900,
210 4800 564
0844 847 5454
MODEL
SERIAL
06 40 54 54 54
800 9990
0818 27 6955
0 800 303 000
199600099
8 820 0071 1111
8 8000 805
805,
2255(GSM)
80200201
8 800 120 2222
880008081
8 0000 710 005
Latvija
8 800 200 7676
Download PDF

advertising